[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.24-gf455cd4 (buildbrain@mobile-u64-532) (gcc version 4.5.3 (crosstool-NG hg_unknown@20110628.165246) ) #1 SMP PREEMPT Wed Jun 18 11:20:52 PDT 2014 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: jetson-tk1, model: NVIDIA Tegra124 PM375, serial: 0 [ 0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space [ 0.000000] Found vpr, start=0xf6900000 size=9700000 [ 0.000000] Found tsec, start=0xf4900000 size=2000000<6>[ 0.000000] Found tegra_fbmem: 01f60000@ad012000 [ 0.000000] Tegra reserved memory: [ 0.000000] LP0: f46ff000 - f46ff80f [ 0.000000] Bootloader framebuffer: ad012000 - aef71fff [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000 [ 0.000000] Framebuffer: ef000000 - f01fffff [ 0.000000] 2nd Framebuffer: f0200000 - f45fffff [ 0.000000] Carveout: 00000000 - 00000000 [ 0.000000] Vpr: f6900000 - ffffffff [ 0.000000] Tsec: f4900000 - f68fffff [ 0.000000] cma: CMA: reserved 16 MiB at ac000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 454656 [ 0.000000] free_area_init_node: node 0, pgdat c0c58e00, node_mem_map c0e09000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2204 pages used for memmap [ 0.000000] HighMem zone: 260096 pages, LIFO batch:31 [ 0.000000] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/arch/arm/boot/dts/tegra124-pm375.dts [ 0.000000] Tegra12: CPU Speedo value 2301, Soc Speedo value 2262, Gpu Speedo value 2131 [ 0.000000] Tegra12: CPU Speedo ID 1, Soc Speedo ID 1, Gpu Speedo ID 1 [ 0.000000] Tegra12: CPU Process ID 1,Soc Process ID 1,Gpu Process ID 1 [ 0.000000] Tegra Revision: A01 SKU: 0x81 CPU Process: 1 Core Process: 1 [ 0.000000] tegra: PLLP fixed rate: 408000000 [ 0.000000] pll_d2: val=00583201 m=1 n=50 p_div=5 input_rate=12000000 [ 0.000000] pll_c4: val=00583201 m=1 n=50 p_div=5 input_rate=12000000 [ 0.000000] pll_dp: val=00583201 m=1 n=50 p_div=5 input_rate=12000000 [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1092000000 [ 0.000000] Lowering sbus maximum rate from 408000000 to 384000000 [ 0.000000] Lowering vic03 maximum rate from 900000000 to 828000000 [ 0.000000] Lowering tsec maximum rate from 900000000 to 828000000 [ 0.000000] Lowering msenc maximum rate from 600000000 to 528000000 [ 0.000000] Lowering se maximum rate from 600000000 to 528000000 [ 0.000000] Lowering vde maximum rate from 600000000 to 528000000 [ 0.000000] Lowering host1x maximum rate from 500000000 to 444000000 [ 0.000000] Lowering vi maximum rate from 700000000 to 600000000 [ 0.000000] Lowering isp maximum rate from 700000000 to 600000000 [ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000 [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000 [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000 [ 0.000000] Lowering nor maximum rate from 127000000 to 102000000 [ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering gbus maximum rate from 1032000000 to 852000000 [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2320500000 [ 0.000000] tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled [ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled [ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled [ 0.000000] Switching to timer-based delay loop [ 0.000000] tegra_powergate_init: DONE [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1cb5000 s15040 r8192 d13632 u36864 [ 0.000000] pcpu-alloc: s15040 r8192 d13632 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 453136 [ 0.000000] Kernel command line: fbcon=map:1 tegraid=40.1.1.0.0 mem=1862M@2048M memtype=255 vpr=151M@3945M tsec=32M@3913M otf_key=b89a956194f5d71a37c9bce303267895 ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,3 console=tty1 usbcore.old_scheme_first=1 lp0_vec=2064@0xf46ff000 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0177:0x0000:0x03:0x45:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0177:0x0000:0x03:0x45:0x00 root=/dev/mmcblk0p1 rw rootwait tegraboot=sdmmc gpt gpt_sector=49151 modem_id=0 android.kerneltype=normal [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1776MB = 1776MB total [ 0.000000] Memory: 1739624k/1739624k available, 167064k reserved, 1040384K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbe800000 - 0xbfe00000 ( 22 MB) [ 0.000000] .text : 0xc0008000 - 0xc0ab1688 (10918 kB) [ 0.000000] .init : 0xc0ab2000 - 0xc0b2eac0 ( 499 kB) [ 0.000000] .data : 0xc0b30000 - 0xc0c6f76c (1278 kB) [ 0.000000] .bss : 0xc0c6f76c - 0xc0cf707c ( 543 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:960 [ 0.000000] the number of interrupt controllers found is 5 [ 0.000000] Architected local timer running at 12.00MHz (phys). [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns [ 0.000000] Ignoring duplicate/late registration of read_current_timer delay [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.003730] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000 [ 0.003800] pid_max: default: 32768 minimum: 301 [ 0.004096] Mount-cache hash table entries: 512 [ 0.018568] Initializing cgroup subsys debug [ 0.018611] Initializing cgroup subsys freezer [ 0.018717] CPU: Testing write buffer coherency: ok [ 0.018788] ftrace: allocating 31844 entries in 63 pages [ 0.059861] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.059912] Setting up static identity map for 0xc07a71b8 - 0xc07a7254 [ 0.063907] ftrace: Allocated trace_printk buffers [ 0.071605] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.074640] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.077660] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.077852] Brought up 4 CPUs [ 0.077916] SMP: Total of 4 processors activated. [ 0.077933] CPU: All CPU(s) started in SVC mode. [ 0.078797] devtmpfs: initialized [ 0.086138] CPA: inner cache maint threshold=2097152 [ 0.088012] pinctrl core: initialized pinctrl subsystem [ 0.088329] regulator-dummy: no parameters [ 0.089019] NET: Registered protocol family 16 [ 0.091477] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.091811] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver [ 0.092489] cpuidle: using governor ladder [ 0.092509] cpuidle: using governor menu [ 0.096042] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default [ 0.096171] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio [ 0.110481] Wake16 for irq=34 [ 0.112309] Wake58 for irq=81 [ 0.112349] Wake41 for irq=129 [ 0.112365] Wake43 for irq=129 [ 0.112400] Wake40 for irq=53 [ 0.112414] Wake42 for irq=53 [ 0.113371] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x03:0x45:0x00 [ 0.113437] disp1 pclk=154700000 [ 0.113448] disp2 pclk=297000000 [ 0.113457] Selecting UARTD as the debug console [ 0.113500] The debug console clock name is uartd [ 0.113742] ardbeg_modem_init: modem_id = 0 [ 0.115287] laguna_as3722_regulator_init: i2c_register_board_info [ 0.115894] Clear bootloader IO dpd settings [ 0.115949] Loading jetson TK1 EMC tables. [ 0.116167] tegra: pll_m is selected as scalable EMC clock source [ 0.116209] Lowering emc maximum rate from 1200000000 to 924000000 [ 0.116233] tegra: validated EMC DFS table [ 0.116332] laguna_edp_init: CPU regulator 15000 mA [ 0.460474] laguna_edp_init: GPU regulator 8000 mA [ 0.460510] swapper/0 isomgr_init(): iso emc max clk=924000KHz [ 0.460528] swapper/0 isomgr_init(): max_iso_bw=6504960KB<6>[ 0.484518] platform tegradc.0: IOVA linear map 0xef000000(1200000) [ 0.488752] platform tegradc.0: IOVA linear map 0xf0200000(4400000) [ 0.496416] platform tegradc.0: IOVA linear map 0xad012000(1f60000) [ 0.499705] platform tegradc.0: IOVA linear map 0xf6900000(9700000) [ 0.501917] platform tegradc.1: IOVA linear map 0xef000000(1200000) [ 0.506138] platform tegradc.1: IOVA linear map 0xf0200000(4400000) [ 0.513800] platform tegradc.1: IOVA linear map 0xad012000(1f60000) [ 0.517086] platform tegradc.1: IOVA linear map 0xf6900000(9700000) [ 0.517630] soctherm THERMTRIP is not supported on this PMIC [ 0.517878] tegra11_soctherem_oc_int_init(): OC interrupts enabled successful [ 0.518324] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518372] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.518543] mc-err: Started MC error interface! [ 0.528926] bio: create slab at 0 [ 0.531364] vgaarb: loaded [ 0.532047] SCSI subsystem initialized [ 0.532228] libata version 3.00 loaded. [ 0.532424] usbcore: registered new interface driver usbfs [ 0.532507] usbcore: registered new interface driver hub [ 0.532633] usbcore: registered new device driver usb [ 0.532865] of_get_named_gpio_flags exited with status 20 [ 0.532878] of_get_named_gpio_flags exited with status 21 [ 0.533277] of_get_named_gpio_flags exited with status 157 [ 0.533289] of_get_named_gpio_flags exited with status 158 [ 0.533515] of_get_named_gpio_flags exited with status 217 [ 0.533527] of_get_named_gpio_flags exited with status 218 [ 0.533782] of_get_named_gpio_flags exited with status 172 [ 0.533794] of_get_named_gpio_flags exited with status 173 [ 0.534016] of_get_named_gpio_flags exited with status 206 [ 0.534027] of_get_named_gpio_flags exited with status 207 [ 0.534786] as3722 4-0040: AS3722 with revision 0x1 found [ 0.537548] gpiochip_add: registered GPIOs 256 to 263 on device: as3722-gpio [ 0.537563] GPIO chip as3722-gpio: created GPIO range 0->7 ==> as3722-pinctrl PIN 0->7 [ 0.539572] as3722_sd0: 700 <--> 1300 mV at 1000 mV 3500 mA normal standby [ 0.540690] as3722_sd1: 700 <--> 1350 mV at 1150 mV 2500 mA normal standby [ 0.541034] as3722_sd2: 1350 mV normal standby [ 0.541351] as3722-sd3: no parameters [ 0.541800] as3722_sd4: 1050 mV normal standby [ 0.542435] as3722_sd5: 1800 mV normal standby [ 0.542909] as3722_sd6: applied init 1000000uV constraint [ 0.543502] as3722_sd6: 650 <--> 1200 mV at 1000 mV 3500 mA normal standby [ 0.543848] as3722_ldo0: 1050 <--> 1225 mV at 1050 mV at 300 mA normal standby [ 0.543903] as3722_ldo0: supplied by as3722_sd2 [ 0.545352] as3722_ldo1: 1800 mV at 150 mA normal standby [ 0.546222] as3722_ldo2: 1200 mV at 150 mA normal standby [ 0.546275] as3722_ldo2: supplied by as3722_sd5 [ 0.547264] as3722_ldo3: 800 mV at 150 mA normal standby [ 0.547742] as3722_ldo4: 2700 mV at 150 mA normal standby [ 0.548205] as3722_ldo5: 1200 mV at 150 mA normal standby [ 0.548257] as3722_ldo5: supplied by as3722_sd5 [ 0.548605] as3722_ldo6: 1800 <--> 3300 mV at 150 mA normal standby [ 0.549098] as3722_ldo7: 1050 mV at 150 mA normal standby [ 0.549151] as3722_ldo7: supplied by as3722_sd5 [ 0.550282] as3722_ldo9: 3300 mV at 150 mA normal standby [ 0.550760] as3722_ldo10: 2700 mV at 150 mA normal standby [ 0.551242] as3722_ldo11: 1800 mV at 150 mA normal standby [ 0.551855] of_get_named_gpio_flags: can't parse gpios property [ 0.551866] of_get_named_gpio_flags: can't parse gpios property [ 0.552233] Linux video capture interface: v2.00 [ 0.553245] Advanced Linux Sound Architecture Driver Initialized. [ 0.554092] fixed_reg_battery: 8400 mV normal standby [ 0.554373] fixed_reg_aon_1v8: 1800 mV normal standby [ 0.554664] fixed_reg_aon_3v3: 3300 mV normal standby [ 0.554968] fixed_reg_aon_1v2: 1200 mV normal standby [ 0.555242] fixed_reg_vdd_hdmi_5v0: 5000 mV normal standby [ 0.555538] fixed_reg_vdd_hdmi: 3300 mV normal standby [ 0.555576] fixed_reg_vdd_hdmi: supplied by as3722_sd4 [ 0.555886] fixed_reg_vdd_lcd_bl: 3300 mV normal standby [ 0.556139] fixed_reg_lcd_bl_en: 5000 mV normal standby [ 0.556402] fixed_reg_3v3: 3300 mV normal standby [ 0.556774] fixed_reg_5v0: 5000 mV normal standby [ 0.557063] fixed_reg_dcdc_1v8: 1800 mV normal standby [ 0.557723] fixed_reg_as3722_gpio2: 3300 mV normal standby [ 0.558459] fixed_reg_lcd: 3300 mV normal standby [ 0.558730] fixed_reg_sdmmc_en: 3300 mV normal standby [ 0.559018] fixed_reg_vdd_cdc_1v2_aud_pm375: 1200 mV normal standby [ 0.559301] fixed_reg_usb2_vbus_pm359: 5000 mV normal standby [ 0.559598] fixed_reg_usb0_usb1_vbus_pm359: 5000 mV normal standby [ 0.561803] as3722-adc-extcon as3722-adc-extcon.2: USB-Host is disconnected [ 0.565182] tegra: started io power detection dynamic control [ 0.565206] tegra: NO_IO_POWER setting 0x0 [ 0.565226] Switching to clocksource arch_sys_counter [ 0.585919] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.586079] nvmap uc page pool size=54875 pages [ 0.609109] nvmap pool = uc, highmem=25600, pool_size=54875,totalram=439002, freeram=410563, totalhigh=260096, freehigh=234364 [ 0.609809] nvmap wc page pool size=54875 pages [ 0.632788] nvmap pool = wc, highmem=25600, pool_size=54875,totalram=439002, freeram=384864, totalhigh=260096, freehigh=208665 [ 0.634120] misc nvmap: created heap iram base 0x40001000 size (252KiB) [ 0.637738] misc nvmap: created heap vpr base 0xf6900000 size (154624KiB) [ 0.637883] nvmap:inner cache maint threshold=2097152 [ 0.647364] Wake39 for irq=52 [ 0.647458] tegra-otg tegra-otg: otg transceiver registered [ 0.647776] NET: Registered protocol family 2 [ 0.648441] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.648641] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.648840] TCP: Hash tables configured (established 8192 bind 8192) [ 0.648898] TCP: reno registered [ 0.648920] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.648973] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.649249] NET: Registered protocol family 1 [ 0.649656] RPC: Registered named UNIX socket transport module. [ 0.649679] RPC: Registered udp transport module. [ 0.649697] RPC: Registered tcp transport module. [ 0.649714] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.649738] PCI: CLS 0 bytes, default 64 [ 0.654683] host1x host1x: initialized [ 0.655890] CPU PMU: probing PMU on CPU 0 [ 0.655922] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.656791] tegra_throttle : init passed [ 0.656882] Tegra cpuquiet initialized: disabled [ 0.657014] cpu-tegra: init EDP limit: 2320 MHz [ 0.657946] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 0.658263] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 0.658540] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm [ 0.658797] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.660578] bounce pool size: 64 pages [ 0.661843] NTFS driver 2.1.30 [Flags: R/O]. [ 0.661984] fuse init (API version 7.22) [ 0.662217] msgmni has been set to 1397 [ 0.663772] io scheduler noop registered (default) [ 0.865152] PCIE: port 0: link down, retrying [ 1.065195] PCIE: port 0: link down, retrying [ 1.265235] PCIE: port 0: link down, retrying [ 1.265254] PCIE: port 0: link down, ignoring [ 1.270421] PCI host bridge to bus 0000:00 [ 1.270447] pci_bus 0000:00: root bus resource [mem 0x32100000-0x3fffffff] [ 1.270473] pci_bus 0000:00: root bus resource [mem 0x12100000-0x320fffff pref] [ 1.270502] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 1.270525] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.270585] pci 0000:00:00.0: [10de:0e13] type 01 class 0x060400 [ 1.270702] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.270935] PCI: bus0: Fast back to back transfers disabled [ 1.270962] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.271182] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 1.271220] pci 0000:01:00.0: reg 10: [io 0x0000-0x00ff] [ 1.271273] pci 0000:01:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit] [ 1.271331] pci 0000:01:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.271451] pci 0000:01:00.0: supports D1 D2 [ 1.271461] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.273345] PCI: bus1: Fast back to back transfers disabled [ 1.273373] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.273390] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 1.273685] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.273713] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.273740] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded [ 1.273859] aer 0000:00:00.0:pcie02: service driver aer loaded [ 1.273967] pcieport 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff] [ 1.273999] pcieport 0000:00:00.0: BAR 9: assigned [mem 0x12100000-0x121fffff 64bit pref] [ 1.274029] pcieport 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 1.274057] pci 0000:01:00.0: BAR 4: assigned [mem 0x12100000-0x12103fff 64bit pref] [ 1.274105] pci 0000:01:00.0: BAR 2: assigned [mem 0x32100000-0x32100fff 64bit] [ 1.274150] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.274179] pcieport 0000:00:00.0: PCI bridge to [bus 01] [ 1.274202] pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 1.274229] pcieport 0000:00:00.0: bridge window [mem 0x32100000-0x321fffff] [ 1.274258] pcieport 0000:00:00.0: bridge window [mem 0x12100000-0x121fffff 64bit pref] [ 1.274325] PCIE: No Link speed change happened [ 1.274779] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API [ 1.274883] sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found [ 1.276572] msenc msenc: initialized [ 1.277427] tsec tsec: initialized [ 1.279448] isp isp.0: initialized [ 1.280443] isp isp.1: initialized [ 1.282008] vic03 vic03.0: initialized [ 1.283694] gk20a gk20a.0: initialized [ 1.284516] tegradc tegradc.0: DSI: Failed to get chip info [ 1.284610] tegradc tegradc.0: DSI: HS clock rate is 464500 [ 1.286382] p,wuxga-10-1 panel dt support not available [ 1.568751] tegradc tegradc.0: nominal-pclk:154700000 parent:154500000 div:1.0 pclk:154500000 153153000~168623000 [ 1.657492] tegradc tegradc.0: DSI pad calibration done [ 1.664044] tegradc tegradc.0: probed [ 1.664432] tegradc tegradc.0: probed [ 1.664665] tegradc tegradc.0: nominal-pclk:154679000 parent:463500000 div:3.0 pclk:154500000 153132210~168600110 [ 1.686635] gpio wake4 for gpio=111 [ 1.702500] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 1.703853] tegradc tegradc.1: probed [ 1.771152] Console: switching to colour frame buffer device 240x67 [ 1.833780] tegradc tegradc.1: probed [ 1.834153] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 1.837843] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 1.903991] hdmi_state_machine_worker (tid ebad8080): state 0 (Reset), hpd 1, pending_hpd_evt 1 [ 1.904443] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 0 (Reset) [ 1.908036] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels [ 1.909006] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.910473] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra [ 1.946611] hdmi_state_machine_worker (tid ebad8080): state 0 (Reset), hpd 1, pending_hpd_evt 0 [ 1.946614] hdmi_disable_l: audio_switch 0 [ 1.946617] hdmi_disable_l: hpd_switch 0 [ 1.946622] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.960315] hdmi_state_machine_worker (tid ebad8080): state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.960321] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 2.027580] hdmi_state_machine_worker (tid ebad8080): state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 2.047576] panel size 51 by 29 [ 3.651236] console [ttyS0] enabled [ 3.652830] serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA [ 3.653136] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA [ 3.653455] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA [ 3.657433] loop: module loaded [ 3.657734] nct1008_nct72 0-004c: success in enabling rail vdd_nct72 [ 3.665273] gpio wake35 for gpio=70 [ 3.665357] nct1008_nct72 0-004c: nct1008_probe: initialized [ 3.666514] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 3.677467] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 3.682027] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0 [ 3.682638] tegra-sata tegra-sata.0: version 1.0 [ 3.683356] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode [ 3.683368] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 3.684598] scsi0 : tegra-sata [ 3.684983] scsi1 : tegra-sata [ 3.685194] ata1: SATA max UDMA/133 irq 55 [ 3.685198] ata2: DUMMY [ 3.687212] tun: Universal TUN/TAP device driver, 1.6 [ 3.687215] tun: (C) 1999-2004 Max Krasnyansky [ 3.687455] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.690219] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf017c000, 00:04:4b:21:2d:75, XID 0c000800 IRQ 641 [ 3.690226] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.690370] PPP generic driver version 2.4.2 [ 3.690520] PPP BSD Compression module registered [ 3.690530] PPP Deflate Compression module registered [ 3.690543] PPP MPPE Compression module registered [ 3.690549] NET: Registered protocol family 24 [ 3.690612] usbcore: registered new interface driver asix [ 3.690656] usbcore: registered new interface driver ax88179_178a [ 3.690696] usbcore: registered new interface driver cdc_ether [ 3.690751] usbcore: registered new interface driver smsc95xx [ 3.690797] usbcore: registered new interface driver cdc_subset [ 3.690865] usbcore: registered new interface driver cdc_ncm [ 3.690882] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.691178] ehci-pci: EHCI PCI platform driver [ 3.691482] tegra_xusb_read_usb_calib: usb_calib0 = 0x0306838c [ 3.692740] tegra-xhci tegra-xhci: XUSB device id = 0xfa3 (T124+) [ 3.693440] tegra-xhci tegra-xhci: 131072 bytes log buffer physical 0x2147745792 virtual 0xf017e000 [ 3.695028] usbcore: registered new interface driver cdc_acm [ 3.695031] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.695072] usbcore: registered new interface driver cdc_wdm [ 3.695129] usbcore: registered new interface driver usb-storage [ 3.695272] usbcore: registered new interface driver usbserial [ 3.695334] usbcore: registered new interface driver option [ 3.695369] usbserial: USB Serial support registered for GSM modem (1-port) [ 3.695405] usbcore: registered new interface driver pl2303 [ 3.695437] usbserial: USB Serial support registered for pl2303 [ 3.695443] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012) [ 3.695588] tegra USB phy - inst[0] platform info: [ 3.695591] port_otg: yes [ 3.695593] has_hostpc: yes [ 3.695596] phy_interface: USB_PHY_INTF_UTMI [ 3.695601] op_mode: TEGRA_USB_OPMODE_DEVICE [ 3.695604] vbus_pmu_irq: 0 [ 3.695607] vbus_gpio: -1 [ 3.695609] charging: disabled [ 3.695612] remote_wakeup: disabled [ 3.701014] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled [ 3.701154] otg state changed: SUSPEND --> PERIPHERAL [ 3.702033] usbcore: registered new interface driver xpad [ 3.705575] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0 [ 3.705583] as3722-rtc as3722-rtc.1: RTC interrupt 917 [ 3.708184] i2c /dev entries driver [ 3.711545] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os [ 3.712193] tegra_dtv_probe: probing dtv. [ 3.712570] setup_stream: bufsize = 4096, bufnum = 4 [ 3.712571] ar0832_init: ++ [ 3.712945] i2c-core: driver [max77387] using legacy suspend method [ 3.712948] i2c-core: driver [max77387] using legacy resume method [ 3.712999] i2c-core: driver [as364x] using legacy suspend method [ 3.713002] i2c-core: driver [as364x] using legacy resume method [ 3.713151] [IMX135] sensor driver loading [ 3.713198] [IMX179] sensor driver loading [ 3.713263] [imx132] sensor driver loading [ 3.713332] [ar0261] sensor driver loading [ 3.713446] usbcore: registered new interface driver uvcvideo [ 3.713448] USB Video Class driver (1.1.1) [ 3.714772] device-mapper: uevent: version 1.0.3 [ 3.715003] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 3.715192] sdhci: Secure Digital Host Controller Interface driver [ 3.715195] sdhci: Copyright(c) Pierre Ossman [ 3.715198] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.715522] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required. [ 3.715684] sdhci-tegra sdhci-tegra.3: Speedo value 2262 [ 3.715692] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100 [ 3.715725] mmc0: no vqmmc regulator found [ 3.715742] mmc0: no vmmc regulator found [ 3.715747] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.741315] sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found [ 3.741315] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA [ 3.742519] sdhci-tegra sdhci-tegra.2: Speedo value 2262 [ 3.742530] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100 [ 3.742568] mmc1: no vqmmc regulator found [ 3.742587] mmc1: no vmmc regulator found [ 3.742594] mmc1: Invalid maximum block size, assuming 512 bytes [ 3.769337] sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found [ 3.769338] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA [ 3.769497] gpio wake56 for gpio=170 [ 3.769593] gpio wake56 for gpio=170 [ 3.769598] Enabling wake56 [ 3.774883] tegra-se tegra12-se: tegra_se_probe: complete [ 3.779446] usbcore: registered new interface driver usbhid [ 3.779450] usbhid: USB HID core driver [ 3.788849] mmc0: BKOPS_EN bit is not set [ 3.792156] mmc0: new high speed DDR MMC card at address 0001 [ 3.792538] mmcblk mmc0:0001: Card claimed for testing. [ 3.792803] mmcblk0: mmc0:0001 SEM16G 14.6 GiB [ 3.792993] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 3.796002] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 3.876027] usbcore: registered new interface driver snd-usb-audio [ 3.876671] MAX98090 driver built on Jun 18 2014 at 11:18:29 [ 3.994331] ata1: SATA link down (SStatus 0 SControl 300) [ 4.066162] mmc1: new high speed SDHC card at address 0002 [ 4.066410] mmcblk mmc1:0002: Card claimed for testing. [ 4.066575] mmcblk1: mmc1:0002 SD16G 14.8 GiB [ 4.073004] mmcblk1: p1 [ 4.143982] rt5639 0-001c: read 0xfd=0x6 [ 4.176841] rt5639 0-001c: ASoC: mux INR Mux has no paths [ 4.176869] rt5639 0-001c: ASoC: mux INL Mux has no paths [ 4.178443] gpio wake49 for gpio=143 [ 4.682337] rt5639 0-001c: rt5639_headset_detect RT5639_PWR_ANLG1(0x63) = 0xa814 [ 4.683061] rt5639 0-001c: rt5639_headset_detect RT5639_IRQ_CTRL2(0xbe) = 0x0 [ 4.686210] rt5639 0-001c: rt5639_headset_detect jack_type = 2 [ 4.686665] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok [ 4.687269] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-spdif mapping ok [ 4.687999] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-i2s.3 mapping ok [ 4.688741] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> dit-hifi mapping ok [ 4.689501] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> dit-hifi mapping ok [ 4.692564] input: tegra-rt5639 Headphone Jack as /devices/platform/tegra-snd-rt5639.0/sound/card1/input0 [ 4.694431] sysedp_create_consumer: unable to create speaker, no consumer_data for speaker found [ 4.694432] oprofile: using timer interrupt. [ 4.701890] GACT probability NOT on [ 4.701897] Mirror/redirect action on [ 4.701903] u32 classifier [ 4.701905] Actions configured [ 4.701912] Netfilter messages via NETLINK v0.30. [ 4.701978] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 4.740435] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 4.740438] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 4.759385] xt_time: kernel timezone is -0000 [ 4.759705] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.759865] arp_tables: (C) 2002 David S. Miller [ 4.759906] TCP: cubic registered [ 4.877669] NET: Registered protocol family 10 [ 4.932738] mip6: Mobile IPv6 [ 4.932771] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.932938] sit: IPv6 over IPv4 tunneling driver [ 4.934023] NET: Registered protocol family 17 [ 4.934052] NET: Registered protocol family 15 [ 4.934080] NET: Registered protocol family 35 [ 4.967075] NET: Registered protocol family 37 [ 4.967079] NET: Registered protocol family 41 [ 5.008253] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 5.045036] Registering SWP/SWPB emulation handler [ 5.045046] last reset is due to power on reset [ 5.045046] [ 5.053510] Disabling clocks left on by bootloader: [ 5.053513] audio_2x [ 5.053525] audio [ 5.053529] audio4 [ 5.053533] audio3 [ 5.053537] audio2 [ 5.053541] audio1 [ 5.053545] audio0 [ 5.053639] hdmi_audio [ 5.053645] entropy [ 5.053657] dsi2-fixed [ 5.053660] dsi1-fixed [ 5.053684] trace [ 5.053693] bsev [ 5.053746] cclk_lp [ 5.053757] pll_x_out0 [ 5.053761] pll_u_12M [ 5.053780] pll_m_out1 [ 5.055007] tegra_dvfs: registered vdd_cpu simon notifier [ 5.055445] Tegra CPU DFLL is initialized with use_dfll = 1 [ 5.055504] CPU rate: 696 MHz [ 5.058360] cpu_cold cooling device is registered [ 5.059516] cpu_hot cooling device is registered [ 5.331560] tegra dvfs: tegra sysfs cap interface is initialized [ 5.331693] tegra dvfs: tegra sysfs gpu & emc interface is initialized [ 5.331701] tegra dvfs: registered vdd_gpu simon notifier [ 5.332100] tegra_actmon.emc: Completed initialization (0) [ 5.332491] tegra_actmon.avp: Completed initialization (0) [ 5.332692] tegra_mon.cpu_emc: Completed initialization (0) [ 5.336206] as3722_ldo11: disabling [ 5.336393] as3722_ldo10: disabling [ 5.336561] as3722_ldo9: disabling [ 5.336728] as3722_ldo7: disabling [ 5.336896] as3722_ldo5: disabling [ 5.337063] as3722_ldo4: disabling [ 5.337230] as3722_ldo1: disabling [ 5.337401] as3722-sd3: disabling [ 5.338324] of_get_named_gpio_flags exited with status 128 [ 5.338348] gpio wake51 for gpio=128 [ 5.338584] input: gpio-keys.2 as /devices/platform/gpio-keys.2/input/input1 [ 5.350225] as3722-rtc as3722-rtc.1: setting system clock to 2014-07-23 19:05:21 UTC (1406142321) [ 5.350868] ALSA device list: [ 5.350873] #0: HDA NVIDIA Tegra at 0x70038000 irq 113 [ 5.350876] #1: tegra-rt5639 [ 6.913654] handle_check_edid_l: audio_switch 0 [ 6.913680] Display connected, hpd_switch 1 [ 6.913689] hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled) [ 6.913767] hdmi_state_machine_worker (tid ebad8080): state 4 (Enabled), hpd 1, pending_hpd_evt 0 [ 6.975994] panel size 51 by 29 [ 6.988186] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 7.004511] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 7.141857] handle_check_edid_l: audio_switch 0 [ 7.141859] Display connected, hpd_switch 1 [ 7.141866] hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 4 (Enabled) [ 7.141875] hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 5 (Wait for HPD reassert) [ 7.208155] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 7.226521] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 7.661056] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 655464 [ 7.661467] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 666722 [ 7.661631] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 657847 [ 7.661807] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 666713 [ 7.662004] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 161004 [ 7.667423] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 662543 [ 7.670260] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 795654 [ 7.673736] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 797438 [ 7.673959] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 797435 [ 7.674066] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 797281 [ 7.675346] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 279578 [ 7.675407] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 279577 [ 7.677338] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 160955 [ 7.677606] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 160790 [ 7.680892] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 12161 [ 7.684171] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 279295 [ 7.687480] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 792914 [ 7.690990] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 272840 [ 7.693935] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 268577 [ 7.694071] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 797223 [ 7.696799] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 796566 [ 7.699880] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 795638 [ 7.699995] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 796581 [ 7.703516] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 791984 [ 7.703637] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 792973 [ 7.703789] EXT4-fs (mmcblk0p1): 25 orphan inodes deleted [ 7.718659] EXT4-fs (mmcblk0p1): recovery complete [ 7.774668] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.792495] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 7.811920] devtmpfs: mounted [ 8.111830] init: plymouth-upstart-bridge main process (119) terminated with status 1 [ 8.130781] init: plymouth-upstart-bridge main process ended, respawning [ 8.189071] init: plymouth-upstart-bridge main process (129) terminated with status 1 [ 8.207397] init: plymouth-upstart-bridge main process ended, respawning [ 8.229114] init: ureadahead main process (122) terminated with status 5 [ 8.277969] init: plymouth-upstart-bridge main process (133) terminated with status 1 [ 8.296412] init: plymouth-upstart-bridge main process ended, respawning [ 8.645345] hdmi_state_machine_worker (tid ebad8080): state 5 (Wait for HPD reassert), hpd 1, pending_hpd_evt 0 [ 8.666930] hdmi_state_machine_set_state_l: switching from state 5 (Wait for HPD reassert) to state 0 (Reset) [ 8.688719] hdmi_state_machine_worker (tid ebad8080): state 0 (Reset), hpd 1, pending_hpd_evt 0 [ 8.709499] hdmi_disable_l: audio_switch 0 [ 8.729440] hdmi_disable_l: hpd_switch 0 [ 8.745850] HDMI from connected to disconnected [ 8.764606] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug) [ 8.796334] hdmi_state_machine_worker (tid ebad8080): state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 8.818763] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 8.901329] hdmi_state_machine_worker (tid ebad8080): state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 8.937588] panel size 51 by 29 [ 9.006640] handle_check_edid_l: audio_switch 1 [ 9.006675] Display connected, hpd_switch 1 [ 9.006694] hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled) [ 9.006734] hdmi_state_machine_worker (tid ebad8080): state 4 (Enabled), hpd 1, pending_hpd_evt 0 [ 9.008656] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 9.474099] init: idmapd main process (281) terminated with status 1 [ 9.474159] init: idmapd main process ended, respawning [ 9.483520] systemd-udevd[278]: starting version 204 [ 9.730922] Tegra cpuquiet clusterswitch enabled [ 9.765261] vi vi.0: vi_probe: ++ [ 9.772922] vi vi.0: initialized [ 9.773217] vi vi.1: vi_probe: ++ [ 9.774309] vi vi.1: initialized [ 9.977010] tegra-xhci tegra-xhci: Firmware File: tegra_xusb_firmware (134656 Bytes) [ 9.977586] tegra-xhci tegra-xhci: Firmware DMA Memory: dma 0x800c0000 mapped 0xf0390000 (134656 Bytes) [ 10.032340] tegra-xhci tegra-xhci: Firmware timestamp: 2014-05-02 02:22:50 UTC, Falcon state 0x20 [ 10.032481] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller [ 10.032517] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 1 [ 10.033521] tegra-xhci tegra-xhci: irq 71, io mem 0x70090000 [ 10.033643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.033657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.033669] usb usb1: Product: Nvidia xHCI Host Controller [ 10.033681] usb usb1: Manufacturer: Linux 3.10.24-gf455cd4 tegra-xhci [ 10.033692] usb usb1: SerialNumber: tegra-xhci [ 10.034185] xHCI xhci_add_endpoint called for root hub [ 10.034199] xHCI xhci_check_bandwidth called for root hub [ 10.034404] hub 1-0:1.0: USB hub found [ 10.034445] hub 1-0:1.0: 6 ports detected [ 10.046482] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller [ 10.046513] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 2 [ 10.046716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 10.046730] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.046741] usb usb2: Product: Nvidia xHCI Host Controller [ 10.046752] usb usb2: Manufacturer: Linux 3.10.24-gf455cd4 tegra-xhci [ 10.046765] usb usb2: SerialNumber: tegra-xhci [ 10.047409] xHCI xhci_add_endpoint called for root hub [ 10.047421] xHCI xhci_check_bandwidth called for root hub [ 10.047596] hub 2-0:1.0: USB hub found [ 10.047625] hub 2-0:1.0: 2 ports detected [ 10.058492] Wake58 for irq=81 [ 10.058530] Wake40 for irq=53 [ 10.058542] Wake42 for irq=53 [ 10.058570] Wake41 for irq=129 [ 10.058578] Wake43 for irq=129 [ 10.212826] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 10.323799] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 10.368045] usb 2-1: new SuperSpeed USB device number 2 using tegra-xhci [ 10.383007] usb 2-1: New USB device found, idVendor=8564, idProduct=4000 [ 10.383016] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.383023] usb 2-1: Product: USB3.0 Hub [ 10.383029] usb 2-1: Manufacturer: Transcend [ 10.385840] hub 2-1:1.0: USB hub found [ 10.386388] hub 2-1:1.0: 4 ports detected [ 10.524574] init: bluetooth main process (383) terminated with status 1 [ 10.524645] init: bluetooth main process ended, respawning [ 10.527151] init: idmapd main process (400) terminated with status 1 [ 10.527217] init: idmapd main process ended, respawning [ 10.542420] usb 1-3: new high-speed USB device number 2 using tegra-xhci [ 10.590732] usb 1-3: New USB device found, idVendor=8564, idProduct=4000 [ 10.590756] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.590769] usb 1-3: Product: USB2.0 Hub [ 10.590780] usb 1-3: Manufacturer: Transcend [ 10.595102] hub 1-3:1.0: USB hub found [ 10.599204] hub 1-3:1.0: 4 ports detected [ 10.926343] usb 1-3.2: new full-speed USB device number 3 using tegra-xhci [ 10.942132] usb 1-3.2: New USB device found, idVendor=046d, idProduct=c52e [ 10.942154] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.942167] usb 1-3.2: Product: USB Receiver [ 10.942177] usb 1-3.2: Manufacturer: Logitech [ 10.946643] input: Logitech USB Receiver as /devices/platform/tegra-xhci/usb1/1-3/1-3.2/1-3.2:1.0/input/input2 [ 10.946932] hid-generic 0003:046D:C52E.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-tegra-xhci-3.2/input0 [ 10.951598] input: Logitech USB Receiver as /devices/platform/tegra-xhci/usb1/1-3/1-3.2/1-3.2:1.1/input/input3 [ 10.951888] hid-generic 0003:046D:C52E.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-tegra-xhci-3.2/input1 [ 11.027203] usb 1-3.4: new full-speed USB device number 4 using tegra-xhci [ 11.043063] init: udev-fallback-graphics main process (462) terminated with status 1 [ 11.045608] usb 1-3.4: New USB device found, idVendor=046d, idProduct=0a04 [ 11.045630] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.045651] usb 1-3.4: Product: Logitech USB Speaker [ 11.045664] usb 1-3.4: Manufacturer: Logitech [ 11.089268] input: Logitech Logitech USB Speaker as /devices/platform/tegra-xhci/usb1/1-3/1-3.4/1-3.4:1.2/input/input4 [ 11.090127] hid-generic 0003:046D:0A04.0003: input: USB HID v1.00 Device [Logitech Logitech USB Speaker] on usb-tegra-xhci-3.4/input2 [ 11.383132] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 11.768232] init: idmapd main process (520) terminated with status 1 [ 11.768388] init: idmapd main process ended, respawning [ 12.063919] init: bluetooth main process (517) terminated with status 1 [ 12.063999] init: bluetooth main process ended, respawning [ 12.488763] init: idmapd main process (611) terminated with status 1 [ 12.488828] init: idmapd main process ended, respawning [ 12.628946] init: bluetooth main process (613) terminated with status 1 [ 12.629036] init: bluetooth main process ended, respawning [ 13.297829] usb 1-3.1: new high-speed USB device number 5 using tegra-xhci [ 13.311212] usb 1-3.1: New USB device found, idVendor=04e8, idProduct=6865 [ 13.311247] usb 1-3.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 13.311271] usb 1-3.1: Product: SAMSUNG_Android [ 13.311340] usb 1-3.1: Manufacturer: SAMSUNG [ 13.311359] usb 1-3.1: SerialNumber: 4df746d77889cf15 [ 13.408345] init: idmapd main process (702) terminated with status 1 [ 13.408413] init: idmapd main process ended, respawning [ 13.638008] init: bluetooth main process (761) terminated with status 1 [ 13.638112] init: bluetooth main process ended, respawning [ 14.099461] r8169 0000:01:00.0 eth0: link down [ 14.099549] r8169 0000:01:00.0 eth0: link down [ 14.099746] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.786381] init: idmapd main process (932) terminated with status 1 [ 14.786503] init: idmapd main process ended, respawning [ 15.826474] r8169 0000:01:00.0 eth0: link up [ 15.826572] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.918799] init: plymouth-upstart-bridge main process ended, respawning [ 15.924950] init: bluetooth main process (1005) terminated with status 1 [ 15.925179] init: bluetooth main process ended, respawning [ 16.463182] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 16.572953] vgaarb: this pci device is not a vga device [ 16.619540] init: idmapd main process (1077) terminated with status 1 [ 16.619640] init: idmapd main process ended, respawning [ 16.790495] vgaarb: this pci device is not a vga device [ 16.808321] tegra_simon_gpu_grading_cb: graded gpu: v = 800, t = 39000, grade = 0 [ 17.093333] init: bluetooth main process (1137) terminated with status 1 [ 17.093497] init: bluetooth main process ended, respawning [ 17.273939] init: idmapd main process (1167) terminated with status 1 [ 17.274016] init: idmapd main process ended, respawning [ 17.476017] usb 1-3.1: USB disconnect, device number 5 [ 17.553070] init: bluetooth main process (1185) terminated with status 1 [ 17.553165] init: bluetooth main process ended, respawning [ 17.710915] init: idmapd main process (1219) terminated with status 1 [ 17.710996] init: idmapd main process ended, respawning [ 18.037693] init: bluetooth main process (1241) terminated with status 1 [ 18.037795] init: bluetooth main process ended, respawning [ 18.428268] usb 1-3.1: new high-speed USB device number 6 using tegra-xhci [ 18.447948] usb 1-3.1: New USB device found, idVendor=04e8, idProduct=6865 [ 18.447987] usb 1-3.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 18.448011] usb 1-3.1: Product: SAMSUNG_Android [ 18.448033] usb 1-3.1: Manufacturer: SAMSUNG [ 18.448054] usb 1-3.1: SerialNumber: 4df746d77889cf15 [ 19.151087] init: idmapd main process (1355) terminated with status 1 [ 19.151288] init: idmapd main process ended, respawning [ 19.490410] init: bluetooth main process (1453) terminated with status 1 [ 19.490611] init: bluetooth main process ended, respawning [ 20.945691] init: idmapd main process (1583) terminated with status 1 [ 20.945822] init: idmapd main process ended, respawning [ 21.316081] usb 1-3.1: USB disconnect, device number 6 [ 21.520286] init: bluetooth main process (1631) terminated with status 1 [ 21.520612] init: bluetooth main process ended, respawning [ 21.694082] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 22.005781] init: idmapd main process (1684) terminated with status 1 [ 22.005883] init: idmapd main process ended, respawning [ 22.386292] init: bluetooth main process (1708) terminated with status 1 [ 22.386578] init: bluetooth main process ended, respawning [ 22.515341] usb 1-3.1: new high-speed USB device number 7 using tegra-xhci [ 22.516693] init: idmapd main process (1750) terminated with status 1 [ 22.516830] init: idmapd main process ended, respawning [ 22.529561] usb 1-3.1: New USB device found, idVendor=04e8, idProduct=6865 [ 22.529639] usb 1-3.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 22.529658] usb 1-3.1: Product: SAMSUNG_Android [ 22.529676] usb 1-3.1: Manufacturer: SAMSUNG [ 22.529699] usb 1-3.1: SerialNumber: 4df746d77889cf15 [ 22.890153] init: bluetooth main process (1771) terminated with status 1 [ 22.890440] init: bluetooth main process ended, respawning [ 22.906269] init: idmapd main process (1801) terminated with status 1 [ 22.906518] init: idmapd main process ended, respawning [ 23.480959] init: idmapd main process (1880) terminated with status 1 [ 23.481080] init: idmapd main process ended, respawning [ 23.572517] init: bluetooth main process (1857) terminated with status 1 [ 23.572714] init: bluetooth main process ended, respawning [ 24.010136] rt5639 0-001c: one bit hp_amp_power on=1 hp_amp_power_count=0 [ 24.097616] init: idmapd main process (1949) terminated with status 1 [ 24.097767] init: idmapd main process ended, respawning [ 24.142065] init: bluetooth main process (1940) terminated with status 1 [ 24.142174] init: bluetooth main process ended, respawning [ 25.019234] init: idmapd main process (2004) terminated with status 1 [ 25.019454] init: idmapd main process ended, respawning [ 25.308026] init: bluetooth main process (2003) terminated with status 1 [ 25.308246] init: bluetooth main process ended, respawning [ 25.412201] usb 1-3.1: USB disconnect, device number 7 [ 25.817680] init: idmapd main process (2047) terminated with status 1 [ 25.817834] init: idmapd main process ended, respawning [ 26.107437] init: bluetooth main process (2049) terminated with status 1 [ 26.107538] init: bluetooth main process ended, respawning [ 26.271123] init: idmapd main process (2084) terminated with status 1 [ 26.271240] init: idmapd main process ended, respawning [ 26.361843] usb 1-3.1: new high-speed USB device number 8 using tegra-xhci [ 26.377432] usb 1-3.1: New USB device found, idVendor=04e8, idProduct=6865 [ 26.377648] usb 1-3.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 26.377675] usb 1-3.1: Product: SAMSUNG_Android [ 26.377698] usb 1-3.1: Manufacturer: SAMSUNG [ 26.377722] usb 1-3.1: SerialNumber: 4df746d77889cf15 [ 26.611681] init: bluetooth main process (2100) terminated with status 1 [ 26.611823] init: bluetooth main process ended, respawning [ 26.671194] init: idmapd main process (2127) terminated with status 1 [ 26.671289] init: idmapd main process ended, respawning [ 27.147116] init: bluetooth main process (2142) terminated with status 1 [ 27.147433] init: bluetooth main process ended, respawning [ 27.251199] init: idmapd main process (2168) terminated with status 1 [ 27.251566] init: idmapd main process ended, respawning [ 27.626870] init: bluetooth main process (2184) terminated with status 1 [ 27.626999] init: bluetooth main process ended, respawning [ 27.740265] init: idmapd main process (2214) terminated with status 1 [ 27.740551] init: idmapd main process ended, respawning [ 27.999464] init: bluetooth main process (2232) terminated with status 1 [ 27.999609] init: bluetooth main process ended, respawning [ 28.068779] init: idmapd main process (2259) terminated with status 1 [ 28.068982] init: idmapd main process ended, respawning [ 28.356237] init: idmapd main process (2300) terminated with status 1 [ 28.356437] init: idmapd main process ended, respawning [ 28.442211] init: bluetooth main process (2291) terminated with status 1 [ 28.444180] init: bluetooth main process ended, respawning [ 28.948529] init: idmapd main process (2357) terminated with status 1 [ 28.948637] init: idmapd main process ended, respawning [ 29.271868] init: bluetooth main process (2347) terminated with status 1 [ 29.272019] init: bluetooth main process ended, respawning [ 29.976795] init: idmapd main process (2449) terminated with status 1 [ 29.976918] init: idmapd main process ended, respawning [ 30.383501] init: bluetooth main process (2450) terminated with status 1 [ 30.383690] init: bluetooth main process ended, respawning [ 30.791553] init: idmapd main process (2530) terminated with status 1 [ 30.791765] init: idmapd main process ended, respawning [ 31.208056] init: bluetooth main process (2544) terminated with status 1 [ 31.208207] init: bluetooth main process ended, respawning [ 31.408779] init: idmapd main process (2583) terminated with status 1 [ 31.408872] init: idmapd main process ended, respawning [ 32.058408] init: bluetooth main process (2601) terminated with status 1 [ 32.058822] init: bluetooth main process ended, respawning [ 32.168802] init: idmapd main process (2626) terminated with status 1 [ 32.168959] init: idmapd main process ended, respawning [ 32.730290] init: bluetooth main process (2651) terminated with status 1 [ 32.730412] init: bluetooth main process ended, respawning [ 32.734165] init: idmapd main process (2679) terminated with status 1 [ 32.734288] init: idmapd main process ended, respawning [ 33.150937] init: idmapd main process (2722) terminated with status 1 [ 33.151221] init: idmapd main process ended, respawning [ 33.301097] init: bluetooth main process (2713) terminated with status 1 [ 33.301222] init: bluetooth main process ended, respawning [ 33.602007] init: idmapd main process (2771) terminated with status 1 [ 33.602121] init: idmapd main process ended, respawning [ 33.996315] init: bluetooth main process (2786) terminated with status 1 [ 33.996518] init: bluetooth main process ended, respawning [ 34.089127] init: idmapd main process (2823) terminated with status 1 [ 34.089245] init: idmapd main process ended, respawning [ 34.441245] init: idmapd main process (2860) terminated with status 1 [ 34.442217] init: idmapd main process ended, respawning [ 34.445410] init: bluetooth main process (2847) terminated with status 1 [ 34.445512] init: bluetooth main process ended, respawning [ 34.735413] init: idmapd main process (2898) terminated with status 1 [ 34.735523] init: idmapd main process ended, respawning [ 34.860441] init: bluetooth main process (2892) terminated with status 1 [ 34.860603] init: bluetooth main process ended, respawning [ 34.902002] rt5639 0-001c: one bit hp_amp_power on=0 hp_amp_power_count=1 [ 35.189835] init: idmapd main process (2945) terminated with status 1 [ 35.190204] init: idmapd main process ended, respawning [ 35.346359] init: bluetooth main process (2943) terminated with status 1 [ 35.346557] init: bluetooth main process ended, respawning [ 35.640640] init: idmapd main process (2985) terminated with status 1 [ 35.640774] init: idmapd main process ended, respawning [ 35.881400] init: bluetooth main process (2998) terminated with status 1 [ 35.881580] init: bluetooth main process ended, respawning [ 35.992381] init: idmapd main process (3028) terminated with status 1 [ 35.992700] init: idmapd main process ended, respawning [ 36.282207] init: bluetooth main process (3043) terminated with status 1 [ 36.282378] init: bluetooth main process ended, respawning [ 36.351859] init: idmapd main process (3070) terminated with status 1 [ 36.352036] init: idmapd main process ended, respawning [ 36.618301] init: bluetooth main process (3089) terminated with status 1 [ 36.618452] init: bluetooth main process ended, respawning [ 36.688288] init: idmapd main process (3110) terminated with status 1 [ 36.688448] init: idmapd main process ended, respawning [ 36.890524] init: bluetooth main process (3123) terminated with status 1 [ 36.890617] init: bluetooth main process ended, respawning [ 36.961390] init: idmapd main process (3147) terminated with status 1 [ 36.961506] init: idmapd main process ended, respawning [ 37.227933] init: bluetooth main process (3161) terminated with status 1 [ 37.228814] init: bluetooth main process ended, respawning [ 37.290483] init: idmapd main process (3185) terminated with status 1 [ 37.290593] init: idmapd main process ended, respawning [ 37.474456] init: bluetooth main process (3198) terminated with status 1 [ 37.474584] init: bluetooth main process ended, respawning [ 37.525385] init: idmapd main process (3222) terminated with status 1 [ 37.525484] init: idmapd respawning too fast, stopped [ 37.733976] init: bluetooth main process (3235) terminated with status 1 [ 37.734125] init: bluetooth main process ended, respawning [ 37.921046] init: bluetooth main process (3259) terminated with status 1 [ 37.921184] init: bluetooth main process ended, respawning [ 38.113445] init: bluetooth main process (3283) terminated with status 1 [ 38.113888] init: bluetooth main process ended, respawning [ 38.312546] init: bluetooth main process (3307) terminated with status 1 [ 38.312847] init: bluetooth main process ended, respawning [ 38.516237] init: bluetooth main process (3331) terminated with status 1 [ 38.516462] init: bluetooth main process ended, respawning [ 38.705198] init: bluetooth main process (3355) terminated with status 1 [ 38.705453] init: bluetooth respawning too fast, stopped [ 43.551125] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 55.296301] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.