[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-10-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu1) ) #34-Ubuntu SMP Wed Sep 16 00:23:19 UTC 2009 (Ubuntu 2.6.31-10.34-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d5ba000 (usable) [ 0.000000] BIOS-e820: 000000007d5ba000 - 000000007d635000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007d635000 - 000000007e51d000 (usable) [ 0.000000] BIOS-e820: 000000007e51d000 - 000000007e529000 (reserved) [ 0.000000] BIOS-e820: 000000007e529000 - 000000007e5af000 (usable) [ 0.000000] BIOS-e820: 000000007e5af000 - 000000007e5b2000 (ACPI data) [ 0.000000] BIOS-e820: 000000007e5b2000 - 000000007e5f2000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007e5f2000 - 000000007e5ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007e5ff000 - 000000007e600000 (usable) [ 0.000000] BIOS-e820: 000000007e600000 - 000000007ef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x7e600 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F000000 mask FFF000000 uncachable [ 0.000000] 2 base 07E800000 mask FFF800000 uncachable [ 0.000000] 3 base 07E600000 mask FFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007d5ba000 (usable) [ 0.000000] modified: 000000007d5ba000 - 000000007d635000 (ACPI NVS) [ 0.000000] modified: 000000007d635000 - 000000007e51d000 (usable) [ 0.000000] modified: 000000007e51d000 - 000000007e529000 (reserved) [ 0.000000] modified: 000000007e529000 - 000000007e5af000 (usable) [ 0.000000] modified: 000000007e5af000 - 000000007e5b2000 (ACPI data) [ 0.000000] modified: 000000007e5b2000 - 000000007e5f2000 (ACPI NVS) [ 0.000000] modified: 000000007e5f2000 - 000000007e5ff000 (ACPI data) [ 0.000000] modified: 000000007e5ff000 - 000000007e600000 (usable) [ 0.000000] modified: 000000007e600000 - 000000007ef00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 7d07b000 - 7d5af0fd [ 0.000000] Allocated new RAMDISK: 008a5000 - 00dd90fd [ 0.000000] Move RAMDISK from 000000007d07b000 - 000000007d5af0fc to 008a5000 - 00dd90fc [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 INTEL ) [ 0.000000] ACPI: RSDT 7e5fd038 0004C (v01 INTEL DG965MQ 00000174 01000013) [ 0.000000] ACPI: FACP 7e5fc000 00074 (v01 INTEL DG965MQ 00000174 MSFT 01000013) [ 0.000000] ACPI: DSDT 7e5f8000 039AD (v01 INTEL DG965MQ 00000174 MSFT 01000013) [ 0.000000] ACPI: FACS 7e5b2000 00040 [ 0.000000] ACPI: APIC 7e5f7000 00078 (v01 INTEL DG965MQ 00000174 MSFT 01000013) [ 0.000000] ACPI: WDDT 7e5f6000 00040 (v01 INTEL DG965MQ 00000174 MSFT 01000013) [ 0.000000] ACPI: MCFG 7e5f5000 0003C (v01 INTEL DG965MQ 00000174 MSFT 01000013) [ 0.000000] ACPI: ASF! 7e5f4000 000A6 (v32 INTEL DG965MQ 00000174 MSFT 01000013) [ 0.000000] ACPI: SSDT 7e5f3000 001BC (v01 INTEL CpuPm 00000174 MSFT 01000013) [ 0.000000] ACPI: SSDT 7e5f2000 00175 (v01 INTEL Cpu0Ist 00000174 MSFT 01000013) [ 0.000000] ACPI: SSDT 7e5b1000 00175 (v01 INTEL Cpu1Ist 00000174 MSFT 01000013) [ 0.000000] ACPI: SSDT 7e5b0000 00175 (v01 INTEL Cpu2Ist 00000174 MSFT 01000013) [ 0.000000] ACPI: SSDT 7e5af000 00175 (v01 INTEL Cpu3Ist 00000174 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1134MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a0080] TEXT DATA BSS ==> [0000100000 - 00008a0080] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008a1000 - 00008a415d] BRK ==> [00008a1000 - 00008a415d] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008a5000 - 0000dd90fd] NEW RAMDISK ==> [00008a5000 - 0000dd90fd] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00fe200] fe200 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007e600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007d5ba [ 0.000000] 0: 0x0007d635 -> 0x0007e51d [ 0.000000] 0: 0x0007e529 -> 0x0007e5af [ 0.000000] 0: 0x0007e5ff -> 0x0007e600 [ 0.000000] On node 0 totalpages: 517316 [ 0.000000] free_area_init_node: node 0, pgdat c077b840, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2269 pages used for memmap [ 0.000000] HighMem zone: 287822 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7ef00000 (gap: 7ef00000:81000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1fda000, static data 35036 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513271 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10352640 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007e600) [ 0.000000] Memory: 2027840k/2070528k available (4543k kernel code, 40548k reserved, 2129k data, 544k init, 1160364k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0785000 - 0xc080d000 ( 544 kB) [ 0.000000] .data : 0xc056fd84 - 0xc07841a8 (2129 kB) [ 0.000000] .text : 0xc0100000 - 0xc056fd84 (4543 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2400.156 MHz processor. [ 0.001307] Console: colour VGA+ 80x25 [ 0.001310] console [tty0] enabled [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.31 BogoMIPS (lpj=9600624) [ 0.004021] Security Framework initialized [ 0.004038] AppArmor: AppArmor initialized [ 0.004044] Mount-cache hash table entries: 512 [ 0.004148] Initializing cgroup subsys ns [ 0.004152] Initializing cgroup subsys cpuacct [ 0.004155] Initializing cgroup subsys memory [ 0.004161] Initializing cgroup subsys freezer [ 0.004163] Initializing cgroup subsys net_cls [ 0.004174] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004177] CPU: L2 cache: 4096K [ 0.004179] CPU: Physical Processor ID: 0 [ 0.004180] CPU: Processor Core ID: 0 [ 0.004184] using mwait in idle threads. [ 0.004189] Performance Counters: Core2 events, Intel PMU driver. [ 0.004196] ... version: 2 [ 0.004197] ... bit width: 40 [ 0.004199] ... generic counters: 2 [ 0.004200] ... value mask: 000000ffffffffff [ 0.004202] ... max period: 000000007fffffff [ 0.004203] ... fixed-purpose counters: 3 [ 0.004205] ... counter mask: 0000000700000003 [ 0.004208] Checking 'hlt' instruction... OK. [ 0.022178] ACPI: Core revision 20090521 [ 0.028322] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068154] CPU0: Intel(R) Core(TM)2 CPU E6600 @ 2.40GHz stepping 05 [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4800.45 BogoMIPS (lpj=9600905) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.156578] CPU1: Intel(R) Core(TM)2 CPU E6600 @ 2.40GHz stepping 05 [ 0.156590] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.160018] Brought up 2 CPUs [ 0.160020] Total of 2 processors activated (9600.76 BogoMIPS). [ 0.160064] CPU0 attaching sched-domain: [ 0.160066] domain 0: span 0-1 level MC [ 0.160068] groups: 0 1 [ 0.160073] CPU1 attaching sched-domain: [ 0.160075] domain 0: span 0-1 level MC [ 0.160077] groups: 1 0 [ 0.160142] Booting paravirtualized kernel on bare hardware [ 0.160156] regulator: core version 0.5 [ 0.160156] Time: 19:10:13 Date: 09/23/09 [ 0.160156] NET: Registered protocol family 16 [ 0.160156] EISA bus registered [ 0.160156] ACPI: bus type pci registered [ 0.160156] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.160156] PCI: Not using MMCONFIG. [ 0.161359] PCI: Using configuration type 1 for base access [ 0.164057] bio: create slab at 0 [ 0.168105] ACPI: EC: Look up EC in DSDT [ 0.170640] ACPI: Interpreter enabled [ 0.170645] ACPI: (supports S0 S1 S3 S4 S5) [ 0.170663] ACPI: Using IOAPIC for interrupt routing [ 0.170690] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.171319] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources [ 0.171321] PCI: Using MMCONFIG for extended config space [ 0.172924] ACPI: No dock devices found. [ 0.176242] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.176359] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.176362] pci 0000:00:01.0: PME# disabled [ 0.176386] pci 0000:00:02.0: reg 10 32bit mmio: [0x90300000-0x903fffff] [ 0.176394] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff] [ 0.176399] pci 0000:00:02.0: reg 20 io port: [0x3168-0x316f] [ 0.176430] pci 0000:00:02.1: reg 10 32bit mmio: [0x90200000-0x902fffff] [ 0.176479] pci 0000:00:03.0: reg 10 64bit mmio: [0x90426900-0x9042690f] [ 0.176504] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.176507] pci 0000:00:03.0: PME# disabled [ 0.176531] pci 0000:00:03.2: reg 10 io port: [0x3160-0x3167] [ 0.176536] pci 0000:00:03.2: reg 14 io port: [0x3184-0x3187] [ 0.176540] pci 0000:00:03.2: reg 18 io port: [0x3158-0x315f] [ 0.176545] pci 0000:00:03.2: reg 1c io port: [0x3180-0x3183] [ 0.176549] pci 0000:00:03.2: reg 20 io port: [0x3120-0x312f] [ 0.176589] pci 0000:00:03.3: reg 10 io port: [0x3150-0x3157] [ 0.176593] pci 0000:00:03.3: reg 14 32bit mmio: [0x90425000-0x90425fff] [ 0.176670] pci 0000:00:19.0: reg 10 32bit mmio: [0x90400000-0x9041ffff] [ 0.176676] pci 0000:00:19.0: reg 14 32bit mmio: [0x90424000-0x90424fff] [ 0.176682] pci 0000:00:19.0: reg 18 io port: [0x30c0-0x30df] [ 0.176714] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.176718] pci 0000:00:19.0: PME# disabled [ 0.176753] pci 0000:00:1a.0: reg 20 io port: [0x30a0-0x30bf] [ 0.176797] pci 0000:00:1a.1: reg 20 io port: [0x3080-0x309f] [ 0.176848] pci 0000:00:1a.7: reg 10 32bit mmio: [0x90426400-0x904267ff] [ 0.176895] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.176899] pci 0000:00:1a.7: PME# disabled [ 0.176934] pci 0000:00:1b.0: reg 10 64bit mmio: [0x90420000-0x90423fff] [ 0.176973] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.176976] pci 0000:00:1b.0: PME# disabled [ 0.177030] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.177033] pci 0000:00:1c.0: PME# disabled [ 0.177092] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.177095] pci 0000:00:1c.1: PME# disabled [ 0.177150] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.177154] pci 0000:00:1c.2: PME# disabled [ 0.177208] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.177212] pci 0000:00:1c.3: PME# disabled [ 0.177266] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.177270] pci 0000:00:1c.4: PME# disabled [ 0.177313] pci 0000:00:1d.0: reg 20 io port: [0x3060-0x307f] [ 0.177357] pci 0000:00:1d.1: reg 20 io port: [0x3040-0x305f] [ 0.177401] pci 0000:00:1d.2: reg 20 io port: [0x3020-0x303f] [ 0.177451] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90426000-0x904263ff] [ 0.177498] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.177502] pci 0000:00:1d.7: PME# disabled [ 0.177610] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.177614] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.177617] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.177664] pci 0000:00:1f.2: reg 10 io port: [0x3148-0x314f] [ 0.177669] pci 0000:00:1f.2: reg 14 io port: [0x317c-0x317f] [ 0.177674] pci 0000:00:1f.2: reg 18 io port: [0x3140-0x3147] [ 0.177680] pci 0000:00:1f.2: reg 1c io port: [0x3178-0x317b] [ 0.177685] pci 0000:00:1f.2: reg 20 io port: [0x3110-0x311f] [ 0.177690] pci 0000:00:1f.2: reg 24 io port: [0x3100-0x310f] [ 0.177709] pci 0000:00:1f.2: PME# supported from D3hot [ 0.177712] pci 0000:00:1f.2: PME# disabled [ 0.177729] pci 0000:00:1f.3: reg 10 32bit mmio: [0x90426800-0x904268ff] [ 0.177745] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f] [ 0.177781] pci 0000:00:1f.5: reg 10 io port: [0x3138-0x313f] [ 0.177786] pci 0000:00:1f.5: reg 14 io port: [0x3174-0x3177] [ 0.177791] pci 0000:00:1f.5: reg 18 io port: [0x3130-0x3137] [ 0.177797] pci 0000:00:1f.5: reg 1c io port: [0x3170-0x3173] [ 0.177802] pci 0000:00:1f.5: reg 20 io port: [0x30f0-0x30ff] [ 0.177807] pci 0000:00:1f.5: reg 24 io port: [0x30e0-0x30ef] [ 0.177826] pci 0000:00:1f.5: PME# supported from D3hot [ 0.177829] pci 0000:00:1f.5: PME# disabled [ 0.177871] pci 0000:00:01.0: bridge 32bit mmio: [0x90500000-0x905fffff] [ 0.177911] pci 0000:00:1c.0: bridge 32bit mmio: [0x90600000-0x906fffff] [ 0.177957] pci 0000:03:00.0: reg 10 io port: [0x2048-0x204f] [ 0.177965] pci 0000:03:00.0: reg 14 io port: [0x2054-0x2057] [ 0.177973] pci 0000:03:00.0: reg 18 io port: [0x2040-0x2047] [ 0.177980] pci 0000:03:00.0: reg 1c io port: [0x2050-0x2053] [ 0.177988] pci 0000:03:00.0: reg 20 io port: [0x2000-0x203f] [ 0.177996] pci 0000:03:00.0: reg 24 32bit mmio: [0x90100000-0x901001ff] [ 0.178035] pci 0000:03:00.0: supports D1 [ 0.178036] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.178041] pci 0000:03:00.0: PME# disabled [ 0.178086] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff] [ 0.178089] pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff] [ 0.178131] pci 0000:00:1c.2: bridge 32bit mmio: [0x90700000-0x907fffff] [ 0.178172] pci 0000:00:1c.3: bridge 32bit mmio: [0x90800000-0x908fffff] [ 0.178214] pci 0000:00:1c.4: bridge 32bit mmio: [0x90900000-0x909fffff] [ 0.178257] pci 0000:07:00.0: reg 10 32bit mmio: [0x90020000-0x9003ffff] [ 0.178264] pci 0000:07:00.0: reg 14 32bit mmio: [0x90000000-0x9001ffff] [ 0.178270] pci 0000:07:00.0: reg 18 io port: [0x1000-0x103f] [ 0.178291] pci 0000:07:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.178313] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.178317] pci 0000:07:00.0: PME# disabled [ 0.178354] pci 0000:07:03.0: reg 10 32bit mmio: [0x90044000-0x900447ff] [ 0.178361] pci 0000:07:03.0: reg 14 32bit mmio: [0x90040000-0x90043fff] [ 0.178402] pci 0000:07:03.0: supports D1 D2 [ 0.178404] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot [ 0.178408] pci 0000:07:03.0: PME# disabled [ 0.178448] pci 0000:00:1e.0: transparent bridge [ 0.178452] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff] [ 0.178456] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff] [ 0.178485] pci_bus 0000:00: on NUMA node 0 [ 0.178488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.178741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.178872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.178924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.178975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.179026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.179077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.180144] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.180151] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.180233] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12) [ 0.180314] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.184212] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) [ 0.184294] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12) [ 0.184375] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) [ 0.184456] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.184500] SCSI subsystem initialized [ 0.184500] libata version 3.00 loaded. [ 0.184500] usbcore: registered new interface driver usbfs [ 0.184500] usbcore: registered new interface driver hub [ 0.184500] usbcore: registered new device driver usb [ 0.184500] ACPI: WMI: Mapper loaded [ 0.184500] PCI: Using ACPI for IRQ routing [ 0.196130] Bluetooth: Core ver 2.15 [ 0.196147] NET: Registered protocol family 31 [ 0.196147] Bluetooth: HCI device and connection manager initialized [ 0.196147] Bluetooth: HCI socket layer initialized [ 0.196147] NetLabel: Initializing [ 0.196147] NetLabel: domain hash size = 128 [ 0.196147] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.196147] NetLabel: unlabeled traffic allowed by default [ 0.212130] pnp: PnP ACPI init [ 0.212141] ACPI: bus type pnp registered [ 0.214678] pnp: PnP ACPI: found 11 devices [ 0.214681] ACPI: ACPI bus type pnp unregistered [ 0.214684] PnPBIOS: Disabled by ACPI PNP [ 0.214695] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved [ 0.214697] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.214700] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 0.214702] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.214705] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.214707] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.214710] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.214712] system 00:01: iomem range 0xfed20000-0xfed9ffff has been reserved [ 0.214715] system 00:01: iomem range 0xc0000-0xdffff could not be reserved [ 0.214717] system 00:01: iomem range 0xe0000-0xfffff could not be reserved [ 0.214723] system 00:06: ioport range 0x500-0x53f has been reserved [ 0.214726] system 00:06: ioport range 0x400-0x47f has been reserved [ 0.214728] system 00:06: ioport range 0x680-0x6ff has been reserved [ 0.249663] AppArmor: AppArmor Filesystem Enabled [ 0.249683] pci 0000:07:00.0: BAR 6: address space collision on of device [0xfffe0000-0xffffffff] [ 0.249767] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.249769] pci 0000:00:01.0: IO window: disabled [ 0.249773] pci 0000:00:01.0: MEM window: 0x90500000-0x905fffff [ 0.249775] pci 0000:00:01.0: PREFETCH window: disabled [ 0.249778] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.249780] pci 0000:00:1c.0: IO window: disabled [ 0.249784] pci 0000:00:1c.0: MEM window: 0x90600000-0x906fffff [ 0.249788] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.249791] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.249794] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 0.249798] pci 0000:00:1c.1: MEM window: 0x90100000-0x901fffff [ 0.249802] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.249805] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.249807] pci 0000:00:1c.2: IO window: disabled [ 0.249811] pci 0000:00:1c.2: MEM window: 0x90700000-0x907fffff [ 0.249815] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.249818] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.249820] pci 0000:00:1c.3: IO window: disabled [ 0.249824] pci 0000:00:1c.3: MEM window: 0x90800000-0x908fffff [ 0.249827] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.249831] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 [ 0.249832] pci 0000:00:1c.4: IO window: disabled [ 0.249837] pci 0000:00:1c.4: MEM window: 0x90900000-0x909fffff [ 0.249840] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.249844] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 0.249847] pci 0000:00:1e.0: IO window: 0x1000-0x1fff [ 0.249851] pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff [ 0.249855] pci 0000:00:1e.0: PREFETCH window: 0x90a00000-0x90afffff [ 0.249862] alloc irq_desc for 16 on node -1 [ 0.249864] alloc kstat_irqs on node -1 [ 0.249869] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.249873] pci 0000:00:01.0: setting latency timer to 64 [ 0.249879] alloc irq_desc for 17 on node -1 [ 0.249880] alloc kstat_irqs on node -1 [ 0.249883] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.249887] pci 0000:00:1c.0: setting latency timer to 64 [ 0.249894] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.249898] pci 0000:00:1c.1: setting latency timer to 64 [ 0.249904] alloc irq_desc for 18 on node -1 [ 0.249905] alloc kstat_irqs on node -1 [ 0.249908] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.249912] pci 0000:00:1c.2: setting latency timer to 64 [ 0.249918] alloc irq_desc for 19 on node -1 [ 0.249920] alloc kstat_irqs on node -1 [ 0.249922] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.249927] pci 0000:00:1c.3: setting latency timer to 64 [ 0.249933] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.249937] pci 0000:00:1c.4: setting latency timer to 64 [ 0.249943] pci 0000:00:1e.0: setting latency timer to 64 [ 0.249946] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.249948] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.249951] pci_bus 0000:01: resource 1 mem: [0x90500000-0x905fffff] [ 0.249953] pci_bus 0000:02: resource 1 mem: [0x90600000-0x906fffff] [ 0.249955] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] [ 0.249957] pci_bus 0000:03: resource 1 mem: [0x90100000-0x901fffff] [ 0.249959] pci_bus 0000:04: resource 1 mem: [0x90700000-0x907fffff] [ 0.249962] pci_bus 0000:05: resource 1 mem: [0x90800000-0x908fffff] [ 0.249964] pci_bus 0000:06: resource 1 mem: [0x90900000-0x909fffff] [ 0.249966] pci_bus 0000:07: resource 0 io: [0x1000-0x1fff] [ 0.249968] pci_bus 0000:07: resource 1 mem: [0x90000000-0x900fffff] [ 0.249970] pci_bus 0000:07: resource 2 pref mem [0x90a00000-0x90afffff] [ 0.249973] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.249975] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff] [ 0.250002] NET: Registered protocol family 2 [ 0.250080] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.250322] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.250639] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.250782] TCP: Hash tables configured (established 131072 bind 65536) [ 0.250784] TCP reno registered [ 0.250844] NET: Registered protocol family 1 [ 0.250887] Trying to unpack rootfs image as initramfs... [ 0.888757] Switched to high resolution mode on CPU 1 [ 0.892144] Switched to high resolution mode on CPU 0 [ 1.473602] Freeing initrd memory: 5328k freed [ 1.475912] cpufreq-nforce2: No nForce2 chipset. [ 1.476021] Scanning for low memory corruption every 60 seconds [ 1.476258] audit: initializing netlink socket (disabled) [ 1.476270] type=2000 audit(1253733014.472:1): initialized [ 1.483526] highmem bounce pool size: 64 pages [ 1.483531] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.486108] VFS: Disk quotas dquot_6.5.2 [ 1.486186] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.486989] fuse init (API version 7.12) [ 1.487139] msgmni has been set to 1706 [ 1.487337] alg: No test for stdrng (krng) [ 1.487346] io scheduler noop registered [ 1.487348] io scheduler anticipatory registered [ 1.487349] io scheduler deadline registered [ 1.487411] io scheduler cfq registered (default) [ 1.487421] pci 0000:00:02.0: Boot video device [ 1.487857] alloc irq_desc for 24 on node -1 [ 1.487859] alloc kstat_irqs on node -1 [ 1.487867] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 1.487872] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.488016] alloc irq_desc for 25 on node -1 [ 1.488018] alloc kstat_irqs on node -1 [ 1.488024] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 1.488032] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.488223] alloc irq_desc for 26 on node -1 [ 1.488224] alloc kstat_irqs on node -1 [ 1.488231] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X [ 1.488238] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.488419] alloc irq_desc for 27 on node -1 [ 1.488421] alloc kstat_irqs on node -1 [ 1.488427] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X [ 1.488434] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.488616] alloc irq_desc for 28 on node -1 [ 1.488617] alloc kstat_irqs on node -1 [ 1.488624] pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X [ 1.488631] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.488815] alloc irq_desc for 29 on node -1 [ 1.488817] alloc kstat_irqs on node -1 [ 1.488823] pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X [ 1.488830] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.489041] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.489222] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.489494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.489497] ACPI: Power Button [PWRF] [ 1.489567] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.489573] ACPI: Sleep Button [SLPB] [ 1.489890] processor LNXCPU:00: registered as cooling_device0 [ 1.489894] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.490006] processor LNXCPU:01: registered as cooling_device1 [ 1.490009] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.491168] isapnp: Scanning for PnP cards... [ 1.844016] isapnp: No Plug & Play device found [ 1.846693] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.846808] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.847290] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.847392] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.847459] 0000:00:03.3: ttyS1 at I/O 0x3150 (irq = 17) is a 16550A [ 1.849274] brd: module loaded [ 1.850033] loop: module loaded [ 1.850161] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.850403] ata_piix 0000:00:1f.2: version 2.13 [ 1.850413] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.850417] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.850454] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.850498] scsi0 : ata_piix [ 1.850610] scsi1 : ata_piix [ 1.850760] ata1: SATA max UDMA/133 cmd 0x3148 ctl 0x317c bmdma 0x3110 irq 19 [ 1.850765] ata2: SATA max UDMA/133 cmd 0x3140 ctl 0x3178 bmdma 0x3118 irq 19 [ 1.850785] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.850791] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.850833] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.850864] scsi2 : ata_piix [ 1.850956] scsi3 : ata_piix [ 1.851069] ata3: SATA max UDMA/133 cmd 0x3138 ctl 0x3174 bmdma 0x30f0 irq 19 [ 1.851072] ata4: SATA max UDMA/133 cmd 0x3130 ctl 0x3170 bmdma 0x30f8 irq 19 [ 1.852255] pata_marvell 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.852275] pata_marvell 0000:03:00.0: setting latency timer to 64 [ 1.852333] scsi4 : pata_marvell [ 1.852428] scsi5 : pata_marvell [ 1.852518] ata5: PATA max UDMA/100 cmd 0x2048 ctl 0x2054 bmdma 0x2000 irq 17 [ 1.852520] ata6: DUMMY [ 1.853033] pata_acpi 0000:00:03.2: enabling device (0000 -> 0001) [ 1.853037] pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.853056] pata_acpi 0000:00:03.2: setting latency timer to 64 [ 1.853064] pata_acpi 0000:00:03.2: PCI INT C disabled [ 1.854171] Fixed MDIO Bus: probed [ 1.854294] PPP generic driver version 2.4.2 [ 1.854459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.854475] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.854486] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.854489] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.854553] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.858444] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.858450] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.858461] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x90426400 [ 1.872549] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.872668] usb usb1: configuration #1 chosen from 1 choice [ 1.872745] hub 1-0:1.0: USB hub found [ 1.872751] hub 1-0:1.0: 4 ports detected [ 1.872796] alloc irq_desc for 23 on node -1 [ 1.872798] alloc kstat_irqs on node -1 [ 1.872802] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.872809] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.872812] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.872860] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.876758] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.876763] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.876773] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90426000 [ 1.892548] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.892656] usb usb2: configuration #1 chosen from 1 choice [ 1.892724] hub 2-0:1.0: USB hub found [ 1.892739] hub 2-0:1.0: 6 ports detected [ 1.892811] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.892851] uhci_hcd: USB Universal Host Controller Interface driver [ 1.892872] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.892877] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.892880] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.892933] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.892959] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0 [ 1.893044] usb usb3: configuration #1 chosen from 1 choice [ 1.893089] hub 3-0:1.0: USB hub found [ 1.893096] hub 3-0:1.0: 2 ports detected [ 1.893135] alloc irq_desc for 21 on node -1 [ 1.893137] alloc kstat_irqs on node -1 [ 1.893140] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.893145] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.893148] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.893196] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.893222] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080 [ 1.893306] usb usb4: configuration #1 chosen from 1 choice [ 1.893351] hub 4-0:1.0: USB hub found [ 1.893357] hub 4-0:1.0: 2 ports detected [ 1.893396] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.893401] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.893403] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.893451] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.893471] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060 [ 1.893554] usb usb5: configuration #1 chosen from 1 choice [ 1.893602] hub 5-0:1.0: USB hub found [ 1.893607] hub 5-0:1.0: 2 ports detected [ 1.893643] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.893648] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.893651] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.893699] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.893719] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040 [ 1.893804] usb usb6: configuration #1 chosen from 1 choice [ 1.893851] hub 6-0:1.0: USB hub found [ 1.893856] hub 6-0:1.0: 2 ports detected [ 1.893895] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.893900] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.893903] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.893951] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.893971] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020 [ 1.894056] usb usb7: configuration #1 chosen from 1 choice [ 1.894102] hub 7-0:1.0: USB hub found [ 1.894108] hub 7-0:1.0: 2 ports detected [ 1.894308] PNP: No PS/2 controller found. Probing ports directly. [ 1.897213] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.897218] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.897364] mice: PS/2 mouse device common for all mice [ 1.897545] rtc_cmos 00:03: RTC can wake from S4 [ 1.897597] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.897617] rtc0: alarms up to one month, 114 bytes nvram [ 1.897909] device-mapper: uevent: version 1.0.3 [ 1.898030] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.898083] device-mapper: multipath: version 1.1.0 loaded [ 1.898086] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.898254] EISA: Probing bus 0 at eisa.0 [ 1.898258] Cannot allocate resource for EISA slot 1 [ 1.898260] Cannot allocate resource for EISA slot 2 [ 1.898262] Cannot allocate resource for EISA slot 3 [ 1.898277] EISA: Detected 0 cards. [ 1.898341] cpuidle: using governor ladder [ 1.898343] cpuidle: using governor menu [ 1.898877] TCP cubic registered [ 1.899138] NET: Registered protocol family 10 [ 1.899517] lo: Disabled Privacy Extensions [ 1.899800] NET: Registered protocol family 17 [ 1.899843] Bluetooth: L2CAP ver 2.13 [ 1.899844] Bluetooth: L2CAP socket layer initialized [ 1.899847] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.899848] Bluetooth: SCO socket layer initialized [ 1.899868] Bluetooth: RFCOMM TTY layer initialized [ 1.899870] Bluetooth: RFCOMM socket layer initialized [ 1.899872] Bluetooth: RFCOMM ver 1.11 [ 1.900157] Using IPI No-Shortcut mode [ 1.900281] PM: Resume from disk failed. [ 1.900292] registered taskstats version 1 [ 1.900418] Magic number: 9:379:193 [ 1.900470] rtc_cmos 00:03: setting system clock to 2009-09-23 19:10:15 UTC (1253733015) [ 1.900473] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.900474] EDD information not available. [ 2.178579] ata4: SATA link down (SStatus 0 SControl 300) [ 2.332061] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.354751] ata3.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133 [ 2.354755] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1) [ 2.360411] ata3.00: configured for UDMA/133 [ 2.520031] usb 2-5: new high speed USB device using ehci_hcd and address 4 [ 2.652078] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.652090] ata1.01: SATA link down (SStatus 0 SControl 300) [ 2.654898] usb 2-5: configuration #1 chosen from 1 choice [ 2.660382] ata1.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 [ 2.660386] ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.676407] ata1.00: configured for UDMA/133 [ 2.676527] scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 [ 2.676803] sd 0:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB) [ 2.676843] sd 0:0:0:0: [sda] Write Protect is off [ 2.676845] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.676866] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.676969] sda: [ 2.677051] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.689278] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 2.759996] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.764077] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.764089] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.772239] ata2.00: ATAPI: PLEXTOR DVDR PX-755A, 1.02, max UDMA/66 [ 2.772252] ata2.00: applying bridge limits [ 2.788260] ata2.00: configured for UDMA/66 [ 2.789069] scsi 1:0:0:0: CD-ROM PLEXTOR DVDR PX-755A 1.02 PQ: 0 ANSI: 5 [ 2.791263] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.791267] Uniform CD-ROM driver Revision: 3.20 [ 2.791425] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.791524] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.791594] scsi 2:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5 [ 2.791772] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.791809] sd 2:0:0:0: [sdb] Write Protect is off [ 2.791812] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.791831] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.791926] sdb: [ 2.792044] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.796235] sdb1 [ 2.796456] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.796469] Freeing unused kernel memory: 544k freed [ 2.796721] Write protecting the kernel text: 4544k [ 2.796761] Write protecting the kernel read-only data: 1828k [ 2.896025] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 2.961950] xor: automatically using best checksumming function: pIII_sse [ 2.980501] pIII_sse : 8529.000 MB/sec [ 2.980503] xor: using function: pIII_sse (8529.000 MB/sec) [ 2.982414] device-mapper: dm-raid45: initialized v0.2594b [ 3.021641] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 3.021644] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 3.021684] alloc irq_desc for 20 on node -1 [ 3.021686] alloc kstat_irqs on node -1 [ 3.021692] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.021698] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 3.021741] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.021804] alloc irq_desc for 30 on node -1 [ 3.021806] alloc kstat_irqs on node -1 [ 3.021815] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 3.029877] Linux agpgart interface v0.103 [ 3.070277] usb 4-1: configuration #1 chosen from 1 choice [ 3.073241] hub 4-1:1.0: USB hub found [ 3.075209] hub 4-1:1.0: 3 ports detected [ 3.079142] [drm] Initialized drm 1.1.0 20060810 [ 3.081535] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 3.081537] Copyright (c) 1999-2006 Intel Corporation. [ 3.081574] e1000 0000:07:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 3.108007] Initializing USB Mass Storage driver... [ 3.108092] scsi6 : SCSI emulation for USB Mass Storage devices [ 3.108168] usbcore: registered new interface driver usb-storage [ 3.108171] USB Mass Storage support registered. [ 3.108296] usb-storage: device found at 4 [ 3.108298] usb-storage: waiting for device to settle before scanning [ 3.270437] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:84:98:dd [ 3.270440] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.270463] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff [ 3.270669] agpgart-intel 0000:00:00.0: Intel G35 Chipset [ 3.271519] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 3.274195] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [ 3.274371] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.274375] i915 0000:00:02.0: setting latency timer to 64 [ 3.276664] alloc irq_desc for 31 on node -1 [ 3.276666] alloc kstat_irqs on node -1 [ 3.276674] i915 0000:00:02.0: irq 31 for MSI/MSI-X [ 3.347556] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 3.348336] e1000: 0000:07:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:b3:0b:74 [ 3.519013] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 3.519038] ohci1394 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.572529] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[90044000-900447ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.624632] usb 5-1: configuration #1 chosen from 1 choice [ 3.783107] kjournald starting. Commit interval 5 seconds [ 3.783119] EXT3-fs: mounted filesystem with writeback data mode. [ 3.822523] [drm] DAC-6: set mode 1680x1050 16 [ 3.860782] Console: switching to colour frame buffer device 210x65 [ 3.864512] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 3.866223] [drm] fb0: inteldrmfb frame buffer device [ 3.866229] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.019302] kjournald starting. Commit interval 5 seconds [ 4.019312] EXT3-fs: mounted filesystem with writeback data mode. [ 4.063517] usb 5-2: configuration #1 chosen from 1 choice [ 4.083420] kjournald starting. Commit interval 5 seconds [ 4.083431] EXT3-fs: mounted filesystem with writeback data mode. [ 4.141184] usb 4-1.2: new low speed USB device using uhci_hcd and address 3 [ 4.280265] usb 4-1.2: configuration #1 chosen from 1 choice [ 4.299460] usbcore: registered new interface driver hiddev [ 4.299538] usbcore: registered new interface driver usbhid [ 4.299540] usbhid: v2.6:USB HID core driver [ 4.327241] input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.2/4-1.2:1.0/input/input3 [ 4.327349] belkin 0003:050D:3201.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip KVM] on usb-0000:00:1a.1-1.2/input0 [ 4.373177] usb 4-1.3: new full speed USB device using uhci_hcd and address 4 [ 4.500236] usb 4-1.3: configuration #1 chosen from 1 choice [ 4.503212] hub 4-1.3:1.0: USB hub found [ 4.505173] hub 4-1.3:1.0: 4 ports detected [ 4.785164] usb 4-1.3.3: new low speed USB device using uhci_hcd and address 5 [ 4.848138] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001a99e3e] [ 4.918225] usb 4-1.3.3: configuration #1 chosen from 1 choice [ 4.936369] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3:1.0/input/input4 [ 4.936428] generic-usb 0003:413C:3200.0002: input,hidraw1: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1a.1-1.3.3/input0 [ 5.009158] usb 4-1.3.4: new low speed USB device using uhci_hcd and address 6 [ 5.150218] usb 4-1.3.4: configuration #1 chosen from 1 choice [ 5.168380] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.3/4-1.3.4/4-1.3.4:1.0/input/input5 [ 5.168424] generic-usb 0003:04B3:3025.0003: input,hidraw2: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:1a.1-1.3.4/input0 [ 8.104163] usb-storage: device scan complete [ 8.105163] scsi 6:0:0:0: Direct-Access Crucial Gizmo! JR. 0.00 PQ: 0 ANSI: 2 [ 8.105810] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 8.106640] sd 6:0:0:0: [sdc] 2015231 512-byte logical blocks: (1.03 GB/983 MiB) [ 8.107394] sd 6:0:0:0: [sdc] Write Protect is off [ 8.107398] sd 6:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 8.107401] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 8.110516] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 8.110569] sdc: sdc1 [ 8.220135] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 8.220171] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 8.917512] aufs 2-standalone.tree-30-20090727 [ 8.929306] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 24.805743] udev: starting version 147 [ 24.986591] heci: module is from the staging directory, the quality is unknown, you have been warned. [ 24.987623] heci: Intel(R) Management Engine Interface - version 5.0.0.31 [ 24.987625] heci: Copyright (c) 2003 - 2008 Intel Corporation. [ 24.987654] heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.987658] heci 0000:00:03.0: setting latency timer to 64 [ 24.987829] heci: link layer has been established. [ 25.081530] parport_pc 00:08: reported by Plug and Play ACPI [ 25.081582] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 25.088217] heci driver initialization successful. [ 25.182072] ppdev: user-space parallel port driver [ 25.252605] Linux video capture interface: v2.00 [ 25.292704] pwc: Philips webcam module version 10.0.13 loaded. [ 25.292707] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. [ 25.292709] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, [ 25.292711] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. [ 25.292732] pwc: Logitech QuickCam Pro 3000 USB webcam detected. [ 25.314860] pwc: Registered as /dev/video0. [ 25.317846] input: PWC snapshot button as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/input/input6 [ 25.317900] usbcore: registered new interface driver Philips webcam [ 25.379266] ip_tables: (C) 2000-2006 Netfilter Core Team [ 25.535448] alloc irq_desc for 22 on node -1 [ 25.535450] alloc kstat_irqs on node -1 [ 25.535456] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 25.535484] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 25.646480] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 25.696757] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 25.752551] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 25.752771] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.754774] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 25.852126] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 25.852192] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 25.852243] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 25.852291] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 25.852341] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 25.852390] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 25.852437] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 25.866105] usbcore: registered new interface driver snd-usb-audio [ 27.416860] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 27.416863] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 27.417044] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.513978] lp0: using parport0 (interrupt-driven). [ 29.118965] CPU0 attaching NULL sched-domain. [ 29.118970] CPU1 attaching NULL sched-domain. [ 29.132564] CPU0 attaching sched-domain: [ 29.132567] domain 0: span 0-1 level MC [ 29.132569] groups: 0 1 [ 29.132573] domain 1: span 0-1 level CPU [ 29.132575] groups: 0-1 (__cpu_power = 2048) [ 29.132580] CPU1 attaching sched-domain: [ 29.132581] domain 0: span 0-1 level MC [ 29.132583] groups: 1 0 [ 29.132587] domain 1: span 0-1 level CPU [ 29.132589] groups: 0-1 (__cpu_power = 2048) [ 29.155195] SQUASHFS error: squashfs_read_data failed to read block 0x258898b1 [ 29.155199] SQUASHFS error: Unable to read fragment cache entry [258898b1] [ 29.155201] SQUASHFS error: Unable to read page, block 258898b1, size afd6 [ 29.155206] SQUASHFS error: Unable to read fragment cache entry [258898b1] [ 29.155207] SQUASHFS error: Unable to read page, block 258898b1, size afd6 [ 29.155211] SQUASHFS error: Unable to read fragment cache entry [258898b1] [ 29.155213] SQUASHFS error: Unable to read page, block 258898b1, size afd6 [ 29.155216] SQUASHFS error: Unable to read fragment cache entry [258898b1] [ 29.155218] SQUASHFS error: Unable to read page, block 258898b1, size afd6 [ 29.155221] SQUASHFS error: Unable to read fragment cache entry [258898b1] [ 29.155223] SQUASHFS error: Unable to read page, block 258898b1, size afd6 [ 29.168440] SQUASHFS error: squashfs_read_data failed to read block 0x255cd384 [ 29.168443] SQUASHFS error: Unable to read fragment cache entry [255cd384] [ 29.168445] SQUASHFS error: Unable to read page, block 255cd384, size d2c5 [ 29.168449] SQUASHFS error: Unable to read fragment cache entry [255cd384] [ 29.168451] SQUASHFS error: Unable to read page, block 255cd384, size d2c5 [ 29.168455] SQUASHFS error: Unable to read fragment cache entry [255cd384] [ 29.168457] SQUASHFS error: Unable to read page, block 255cd384, size d2c5 [ 29.168460] SQUASHFS error: Unable to read fragment cache entry [255cd384] [ 29.168462] SQUASHFS error: Unable to read page, block 255cd384, size d2c5 [ 29.228646] sd 6:0:0:0: [sdc] 2015231 512-byte logical blocks: (1.03 GB/983 MiB) [ 29.229145] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 30.417322] SQUASHFS error: squashfs_read_data failed to read block 0x1ef877eb [ 30.417326] SQUASHFS error: Unable to read fragment cache entry [1ef877eb] [ 30.417329] SQUASHFS error: Unable to read page, block 1ef877eb, size 9f12 [ 30.417333] SQUASHFS error: Unable to read fragment cache entry [1ef877eb] [ 30.417335] SQUASHFS error: Unable to read page, block 1ef877eb, size 9f12 [ 30.417339] SQUASHFS error: Unable to read fragment cache entry [1ef877eb] [ 30.417341] SQUASHFS error: Unable to read page, block 1ef877eb, size 9f12 [ 30.417344] SQUASHFS error: Unable to read fragment cache entry [1ef877eb] [ 30.417346] SQUASHFS error: Unable to read page, block 1ef877eb, size 9f12 [ 30.417350] SQUASHFS error: Unable to read fragment cache entry [1ef877eb] [ 30.417352] SQUASHFS error: Unable to read page, block 1ef877eb, size 9f12 [ 30.420359] SQUASHFS error: squashfs_read_data failed to read block 0x24898978 [ 30.420363] SQUASHFS error: Unable to read data cache entry [24898978] [ 30.420365] SQUASHFS error: Unable to read page, block 24898978, size bec4 [ 30.420369] SQUASHFS error: Unable to read data cache entry [24898978] [ 30.420371] SQUASHFS error: Unable to read page, block 24898978, size bec4 [ 30.420375] SQUASHFS error: Unable to read data cache entry [24898978] [ 30.420377] SQUASHFS error: Unable to read page, block 24898978, size bec4 [ 30.420380] SQUASHFS error: Unable to read data cache entry [24898978] [ 30.420382] SQUASHFS error: Unable to read page, block 24898978, size bec4 [ 30.420386] SQUASHFS error: Unable to read data cache entry [24898978] [ 30.420388] SQUASHFS error: Unable to read page, block 24898978, size bec4 [ 30.422413] SQUASHFS error: squashfs_read_data failed to read block 0x20d65b5d [ 30.422417] SQUASHFS error: Unable to read fragment cache entry [20d65b5d] [ 30.422419] SQUASHFS error: Unable to read page, block 20d65b5d, size 6855 [ 30.422424] SQUASHFS error: Unable to read fragment cache entry [20d65b5d] [ 30.422426] SQUASHFS error: Unable to read page, block 20d65b5d, size 6855 [ 30.422429] SQUASHFS error: Unable to read fragment cache entry [20d65b5d] [ 30.422431] SQUASHFS error: Unable to read page, block 20d65b5d, size 6855 [ 30.434114] CPU0 attaching NULL sched-domain. [ 30.434119] CPU1 attaching NULL sched-domain. [ 30.440029] sd 6:0:0:0: [sdc] 2015231 512-byte logical blocks: (1.03 GB/983 MiB) [ 30.440606] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 30.441673] SQUASHFS error: Unable to read fragment cache entry [20d65b5d] [ 30.441676] SQUASHFS error: Unable to read page, block 20d65b5d, size 6855 [ 30.441679] SQUASHFS error: Unable to read fragment cache entry [20d65b5d] [ 30.441681] SQUASHFS error: Unable to read page, block 20d65b5d, size 6855 [ 30.441685] SQUASHFS error: Unable to read fragment cache entry [20d65b5d] [ 30.441687] SQUASHFS error: Unable to read page, block 20d65b5d, size 6855 [ 30.441690] SQUASHFS error: Unable to read fragment cache entry [20d65b5d] [ 30.441692] SQUASHFS error: Unable to read page, block 20d65b5d, size 6855 [ 30.441695] SQUASHFS error: Unable to read fragment cache entry [20d65b5d] [ 30.441697] SQUASHFS error: Unable to read page, block 20d65b5d, size 6855 [ 30.452555] CPU0 attaching sched-domain: [ 30.452558] domain 0: span 0-1 level MC [ 30.452560] groups: 0 1 [ 30.452565] CPU1 attaching sched-domain: [ 30.452567] domain 0: span 0-1 level MC [ 30.452569] groups: 1 0 [ 37.796007] eth0: no IPv6 routers present [ 510.951432] padlock: VIA PadLock not detected. [ 510.981125] padlock: VIA PadLock Hash Engine not detected. [ 692.040404] EXT4-fs (dm-1): barriers enabled [ 692.055383] kjournald2 starting: pid 5232, dev dm-1:8, commit interval 5 seconds [ 692.056161] EXT4-fs (dm-1): internal journal on dm-1:8 [ 692.056165] EXT4-fs (dm-1): delayed allocation enabled [ 692.056168] EXT4-fs: file extents enabled [ 692.056507] EXT4-fs: mballoc enabled [ 692.056520] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 911.012015] hub 1-0:1.0: unable to enumerate USB device on port 4 [ 922.092510] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 922.227992] usb 1-4: configuration #1 chosen from 1 choice [ 922.229722] scsi7 : SCSI emulation for USB Mass Storage devices [ 922.229817] usb-storage: device found at 4 [ 922.229819] usb-storage: waiting for device to settle before scanning [ 927.228421] usb-storage: device scan complete [ 927.229039] scsi 7:0:0:0: Direct-Access ST310003 40AS SD15 PQ: 0 ANSI: 4 [ 927.229661] scsi 7:0:0:1: Direct-Access ST310003 40AS SD15 PQ: 0 ANSI: 4 [ 927.232743] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 927.233245] sd 7:0:0:1: Attached scsi generic sg5 type 0 [ 927.233279] sd 7:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 927.234020] sd 7:0:0:0: [sdd] Write Protect is off [ 927.234023] sd 7:0:0:0: [sdd] Mode Sense: 10 00 00 00 [ 927.234025] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 927.234777] sd 7:0:0:1: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 927.236152] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 927.236156] sdd: [ 927.238077] sd 7:0:0:1: [sde] Write Protect is off [ 927.238079] sd 7:0:0:1: [sde] Mode Sense: 10 00 00 00 [ 927.238081] sd 7:0:0:1: [sde] Assuming drive cache: write through [ 927.259784] sdd1 [ 927.261523] sd 7:0:0:1: [sde] Assuming drive cache: write through [ 927.261527] sde: [ 927.262025] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 927.262028] sd 7:0:0:0: [sdd] Attached SCSI disk [ 927.299904] sde1 [ 927.314895] sd 7:0:0:1: [sde] Assuming drive cache: write through [ 927.314899] sd 7:0:0:1: [sde] Attached SCSI disk [ 1437.328531] usb 4-1: USB disconnect, address 2 [ 1437.328534] usb 4-1.2: USB disconnect, address 3 [ 1437.360426] usb 4-1.3: USB disconnect, address 4 [ 1437.360430] usb 4-1.3.3: USB disconnect, address 5 [ 1437.392270] usb 4-1.3.4: USB disconnect, address 6 [ 1438.064513] usb 4-1: new low speed USB device using uhci_hcd and address 7 [ 1438.242902] usb 4-1: configuration #1 chosen from 1 choice [ 1438.269086] input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input15 [ 1438.269154] generic-usb 0003:050D:0102.0004: input,hidraw0: USB HID v1.10 Keyboard [Belkin Corporation Flip KVM] on usb-0000:00:1a.1-1/input0 [ 1438.296054] input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input16 [ 1438.296130] generic-usb 0003:050D:0102.0005: input,hidraw1: USB HID v1.10 Mouse [Belkin Corporation Flip KVM] on usb-0000:00:1a.1-1/input1 [ 1663.504529] usb 4-1: USB disconnect, address 7 [ 1664.244007] usb 4-1: new full speed USB device using uhci_hcd and address 8 [ 1664.400203] usb 4-1: configuration #1 chosen from 1 choice [ 1664.403189] hub 4-1:1.0: USB hub found [ 1664.405149] hub 4-1:1.0: 3 ports detected [ 1664.701140] usb 4-1.2: new low speed USB device using uhci_hcd and address 9 [ 1664.851202] usb 4-1.2: configuration #1 chosen from 1 choice [ 1664.893186] input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.2/4-1.2:1.0/input/input17 [ 1664.893276] belkin 0003:050D:3201.0006: input,hiddev96,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip KVM] on usb-0000:00:1a.1-1.2/input0 [ 1664.977139] usb 4-1.3: new full speed USB device using uhci_hcd and address 10 [ 1665.093209] usb 4-1.3: configuration #1 chosen from 1 choice [ 1665.096166] hub 4-1.3:1.0: USB hub found [ 1665.098134] hub 4-1.3:1.0: 4 ports detected [ 1665.381120] usb 4-1.3.3: new low speed USB device using uhci_hcd and address 11 [ 1665.517181] usb 4-1.3.3: configuration #1 chosen from 1 choice [ 1665.535398] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3:1.0/input/input18 [ 1665.535472] generic-usb 0003:413C:3200.0007: input,hidraw1: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1a.1-1.3.3/input0 [ 1665.609115] usb 4-1.3.4: new low speed USB device using uhci_hcd and address 12 [ 1665.750173] usb 4-1.3.4: configuration #1 chosen from 1 choice [ 1665.768408] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.3/4-1.3.4/4-1.3.4:1.0/input/input19 [ 1665.768469] generic-usb 0003:04B3:3025.0008: input,hidraw2: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:1a.1-1.3.4/input0