[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0-2-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.0-14ubuntu1) ) #3-Ubuntu SMP Fri Jun 24 19:14:33 UTC 2011 (Ubuntu 3.0-2.3-generic 3.0.0-rc4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0-2-generic root=UUID=052e42dc-63a9-4d51-aec0-819969c819b9 ro single nomodeset [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/M3A78-CM, BIOS 2601 06/28/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff80000 page 4k [ 0.000000] kernel direct mapping tables up to cff80000 @ cff7a000-cff80000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] 0100000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ 22fff6000-230000000 [ 0.000000] RAMDISK: 3570a000 - 36b7d000 [ 0.000000] ACPI: RSDP 00000000000fb520 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cff80000 00040 (v01 062810 RSDT1435 20100628 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff80200 00084 (v01 062810 FACP1435 20100628 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff805d0 0733E (v01 A0901 A0901001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cff8e000 00040 [ 0.000000] ACPI: APIC 00000000cff80390 0007C (v01 062810 APIC1435 20100628 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff80410 0003C (v01 062810 OEMMCFG 20100628 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff8e040 00071 (v01 062810 OEMB1435 20100628 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cff87910 000C8 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cff879e0 00038 (v01 062810 OEMHPET 20100628 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff87a20 0028A (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-230000000 [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000) [ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,230000000) -> [0,230000000) [ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff] [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff80 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096910 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000 [ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffd0000 [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000 [ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fc00000 s79616 r8192 d22784 u262144 [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065545 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0-2-generic root=UUID=052e42dc-63a9-4d51-aec0-819969c819b9 ro single nomodeset [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 8104136k/9175040k available (6123k kernel code, 787400k absent, 283504k reserved, 4863k data, 988k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2613.138 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.020050] Calibrating delay loop (skipped), value calculated using timer frequency.. 5226.27 BogoMIPS (lpj=26131380) [ 0.020143] pid_max: default: 32768 minimum: 301 [ 0.020216] Security Framework initialized [ 0.020274] AppArmor: AppArmor initialized [ 0.020319] Yama: becoming mindful. [ 0.021120] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.025670] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.027846] Mount-cache hash table entries: 256 [ 0.028030] Initializing cgroup subsys cpuacct [ 0.028084] Initializing cgroup subsys memory [ 0.028137] Initializing cgroup subsys devices [ 0.028184] Initializing cgroup subsys freezer [ 0.028230] Initializing cgroup subsys net_cls [ 0.030007] Initializing cgroup subsys blkio [ 0.030058] Initializing cgroup subsys perf_event [ 0.030129] tseg: 0000000000 [ 0.030143] CPU: Physical Processor ID: 0 [ 0.030199] CPU: Processor Core ID: 0 [ 0.030244] mce: CPU supports 5 MCE banks [ 0.030298] using AMD E400 aware idle routine [ 0.031665] ACPI: Core revision 20110413 [ 0.034701] ftrace: allocating 25869 entries in 102 pages [ 0.040410] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.142672] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02 [ 0.150000] Performance Events: AMD PMU driver. [ 0.150000] ... version: 0 [ 0.150000] ... bit width: 48 [ 0.150000] ... generic registers: 4 [ 0.150000] ... value mask: 0000ffffffffffff [ 0.150000] ... max period: 00007fffffffffff [ 0.150000] ... fixed-purpose events: 0 [ 0.150000] ... event mask: 000000000000000f [ 0.150000] Booting Node 0, Processors #1 [ 0.150000] smpboot cpu 1: start_ip = 99000 [ 0.300059] Brought up 2 CPUs [ 0.300105] Total of 2 processors activated (10452.58 BogoMIPS). [ 0.300501] devtmpfs: initialized [ 0.300501] PM: Registering ACPI NVS region at cff8e000 (270336 bytes) [ 0.300875] print_constraints: dummy: [ 0.300950] Time: 15:57:19 Date: 07/07/11 [ 0.301033] NET: Registered protocol family 16 [ 0.301112] Trying to unpack rootfs image as initramfs... [ 0.301203] node 0 link 0: io port [1000, ffffff] [ 0.301206] TOM: 00000000d0000000 aka 3328M [ 0.301208] node 0 link 0: mmio [a0000, bffff] [ 0.301210] node 0 link 0: mmio [d0000000, dfffffff] [ 0.301212] node 0 link 0: mmio [e0000000, efffffff] [ 0.301214] node 0 link 0: mmio [f0000000, ffefffff] [ 0.301216] TOM2: 0000000230000000 aka 8960M [ 0.301218] bus: [00, 07] on node 0 link 0 [ 0.301220] bus: 00 index 0 [io 0x0000-0xffff] [ 0.301222] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.301223] bus: 00 index 2 [mem 0xd0000000-0xffffffff] [ 0.301225] bus: 00 index 3 [mem 0x230000000-0xfcffffffff] [ 0.301235] ACPI: bus type pci registered [ 0.301300] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.301303] PCI: not using MMCONFIG [ 0.301305] PCI: Using configuration type 1 for base access [ 0.301327] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.301328] mtrr: probably your BIOS does not setup all CPUs. [ 0.301329] mtrr: corrected configuration. [ 0.302050] bio: create slab at 0 [ 0.302942] ACPI: EC: Look up EC in DSDT [ 0.304513] ACPI: Executed 2 blocks of module-level executable AML code [ 0.360593] ACPI: Interpreter enabled [ 0.360645] ACPI: (supports S0 S1 S3 S4 S5) [ 0.360908] ACPI: Using IOAPIC for interrupt routing [ 0.360974] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.362756] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.692421] Freeing initrd memory: 20940k freed [ 0.761055] ACPI: No dock devices found. [ 0.761104] HEST: Table not found. [ 0.761151] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.761296] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.761540] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.761588] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.761635] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.761685] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.763424] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] [ 0.763475] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff] [ 0.763539] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600 [ 0.763595] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604 [ 0.763625] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.763629] pci 0000:00:02.0: PME# disabled [ 0.763652] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604 [ 0.763680] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.763683] pci 0000:00:06.0: PME# disabled [ 0.763724] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.763745] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] [ 0.763755] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] [ 0.763766] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] [ 0.763777] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] [ 0.763787] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] [ 0.763798] pci 0000:00:11.0: reg 24: [mem 0xfbdff800-0xfbdffbff] [ 0.763820] pci 0000:00:11.0: set SATA to AHCI mode [ 0.763901] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.763915] pci 0000:00:12.0: reg 10: [mem 0xfbdfe000-0xfbdfefff] [ 0.763983] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.763998] pci 0000:00:12.1: reg 10: [mem 0xfbdfd000-0xfbdfdfff] [ 0.764072] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.764093] pci 0000:00:12.2: reg 10: [mem 0xfbdff000-0xfbdff0ff] [ 0.764168] pci 0000:00:12.2: supports D1 D2 [ 0.764170] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.764174] pci 0000:00:12.2: PME# disabled [ 0.764198] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.764213] pci 0000:00:13.0: reg 10: [mem 0xfbdfc000-0xfbdfcfff] [ 0.764281] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.764296] pci 0000:00:13.1: reg 10: [mem 0xfbdfb000-0xfbdfbfff] [ 0.764372] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.764392] pci 0000:00:13.2: reg 10: [mem 0xfbdfa800-0xfbdfa8ff] [ 0.764467] pci 0000:00:13.2: supports D1 D2 [ 0.764469] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.764473] pci 0000:00:13.2: PME# disabled [ 0.764501] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.764600] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.764617] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.764628] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.764638] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.764649] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.764659] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.764712] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.764736] pci 0000:00:14.2: reg 10: [mem 0xfbdf4000-0xfbdf7fff 64bit] [ 0.764797] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.764802] pci 0000:00:14.2: PME# disabled [ 0.764816] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.764897] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.764940] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.764955] pci 0000:00:14.5: reg 10: [mem 0xfbdf9000-0xfbdf9fff] [ 0.765026] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.765044] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.765059] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.765073] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.765132] pci 0000:01:00.0: [1002:6719] type 0 class 0x000300 [ 0.765146] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.765158] pci 0000:01:00.0: reg 18: [mem 0xfbee0000-0xfbefffff 64bit] [ 0.765166] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff] [ 0.765180] pci 0000:01:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref] [ 0.765199] pci 0000:01:00.0: supports D1 D2 [ 0.765222] pci 0000:01:00.1: [1002:aa80] type 0 class 0x000403 [ 0.765236] pci 0000:01:00.1: reg 10: [mem 0xfbebc000-0xfbebffff 64bit] [ 0.765284] pci 0000:01:00.1: supports D1 D2 [ 0.780013] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.780061] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.780065] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.780069] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.780110] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.780124] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.780146] pci 0000:02:00.0: reg 18: [mem 0xfbfff000-0xfbffffff 64bit] [ 0.780161] pci 0000:02:00.0: reg 20: [mem 0xfaff0000-0xfaffffff 64bit pref] [ 0.780171] pci 0000:02:00.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref] [ 0.780202] pci 0000:02:00.0: supports D1 D2 [ 0.780204] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.780208] pci 0000:02:00.0: PME# disabled [ 0.800011] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.800059] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.800062] pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.800067] pci 0000:00:06.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] [ 0.800131] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.800180] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.800185] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.800190] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.800193] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.800196] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.800198] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.800201] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.800203] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 0.800206] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode) [ 0.800220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.800511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.800556] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.800630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.800727] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.800778] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.800828] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.806350] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) [ 0.806798] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.807243] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.807688] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.808135] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.808664] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.809194] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 *11 12 14 15) [ 0.809598] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.810209] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.810264] vgaarb: loaded [ 0.810309] vgaarb: bridge control possible 0000:01:00.0 [ 0.810577] SCSI subsystem initialized [ 0.810644] libata version 3.00 loaded. [ 0.810644] usbcore: registered new interface driver usbfs [ 0.810644] usbcore: registered new interface driver hub [ 0.810644] usbcore: registered new device driver usb [ 0.810644] wmi: Mapper loaded [ 0.810644] PCI: Using ACPI for IRQ routing [ 0.820447] PCI: pci_cache_line_size set to 64 bytes [ 0.820541] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.820543] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff [ 0.820656] NetLabel: Initializing [ 0.820705] NetLabel: domain hash size = 128 [ 0.820750] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.820805] NetLabel: unlabeled traffic allowed by default [ 0.820905] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.821153] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.823246] Switching to clocksource hpet [ 0.826630] Switched to NOHz mode on CPU #0 [ 0.826700] Switched to NOHz mode on CPU #1 [ 0.827494] AppArmor: AppArmor Filesystem Enabled [ 0.827573] pnp: PnP ACPI init [ 0.827636] ACPI: bus type pnp registered [ 0.827825] pnp 00:00: [bus 00-ff] [ 0.827827] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.827830] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.827833] pnp 00:00: [io 0x0d00-0xffff window] [ 0.827835] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.827838] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.827840] pnp 00:00: [mem 0xd0000000-0xdfffffff window] [ 0.827843] pnp 00:00: [mem 0xf0000000-0xfed44fff window] [ 0.827912] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.828021] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.828024] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.828081] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.828138] pnp 00:02: [dma 4] [ 0.828140] pnp 00:02: [io 0x0000-0x000f] [ 0.828142] pnp 00:02: [io 0x0081-0x0083] [ 0.828144] pnp 00:02: [io 0x0087] [ 0.828146] pnp 00:02: [io 0x0089-0x008b] [ 0.828148] pnp 00:02: [io 0x008f] [ 0.828153] pnp 00:02: [io 0x00c0-0x00df] [ 0.828186] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.828199] pnp 00:03: [io 0x0070-0x0071] [ 0.828213] pnp 00:03: [irq 8] [ 0.828244] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.828253] pnp 00:04: [io 0x0061] [ 0.828284] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.828294] pnp 00:05: [io 0x00f0-0x00ff] [ 0.828302] pnp 00:05: [irq 13] [ 0.828336] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.829090] pnp 00:06: [io 0x03f0-0x03f5] [ 0.829092] pnp 00:06: [io 0x03f7] [ 0.829098] pnp 00:06: [irq 6] [ 0.829100] pnp 00:06: [dma 2] [ 0.829159] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.830172] pnp 00:07: [io 0x0378-0x037f] [ 0.830177] pnp 00:07: [irq 7] [ 0.830180] pnp 00:07: [dma 0 disabled] [ 0.830545] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.830585] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.830620] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.831427] pnp 00:09: [io 0x03f8-0x03ff] [ 0.831433] pnp 00:09: [irq 4] [ 0.831435] pnp 00:09: [dma 0 disabled] [ 0.831533] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.831621] pnp 00:0a: [io 0x0060] [ 0.831623] pnp 00:0a: [io 0x0064] [ 0.831626] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.831628] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.831688] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.831740] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.831787] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.831877] pnp 00:0b: [io 0x0010-0x001f] [ 0.831879] pnp 00:0b: [io 0x0022-0x003f] [ 0.831881] pnp 00:0b: [io 0x0062-0x0063] [ 0.831883] pnp 00:0b: [io 0x0065-0x006f] [ 0.831885] pnp 00:0b: [io 0x0072-0x007f] [ 0.831887] pnp 00:0b: [io 0x0080] [ 0.831889] pnp 00:0b: [io 0x0084-0x0086] [ 0.831892] pnp 00:0b: [io 0x0088] [ 0.831894] pnp 00:0b: [io 0x008c-0x008e] [ 0.831896] pnp 00:0b: [io 0x0090-0x009f] [ 0.831898] pnp 00:0b: [io 0x00a2-0x00bf] [ 0.831900] pnp 00:0b: [io 0x00b1] [ 0.831902] pnp 00:0b: [io 0x00e0-0x00ef] [ 0.831904] pnp 00:0b: [io 0x04d0-0x04d1] [ 0.831906] pnp 00:0b: [io 0x040b] [ 0.831908] pnp 00:0b: [io 0x04d6] [ 0.831910] pnp 00:0b: [io 0x0c00-0x0c01] [ 0.831912] pnp 00:0b: [io 0x0c14] [ 0.831914] pnp 00:0b: [io 0x0c50-0x0c51] [ 0.831916] pnp 00:0b: [io 0x0c52] [ 0.831918] pnp 00:0b: [io 0x0c6c] [ 0.831920] pnp 00:0b: [io 0x0c6f] [ 0.831922] pnp 00:0b: [io 0x0cd0-0x0cd1] [ 0.831927] pnp 00:0b: [io 0x0cd2-0x0cd3] [ 0.831929] pnp 00:0b: [io 0x0cd4-0x0cd5] [ 0.831931] pnp 00:0b: [io 0x0cd6-0x0cd7] [ 0.831933] pnp 00:0b: [io 0x0cd8-0x0cdf] [ 0.831935] pnp 00:0b: [io 0x0b00-0x0b3f] [ 0.831937] pnp 00:0b: [io 0x0800-0x089f] [ 0.831939] pnp 00:0b: [io 0x0b20-0x0b2f] [ 0.831941] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] [ 0.831944] pnp 00:0b: [io 0x0900-0x090f] [ 0.831946] pnp 00:0b: [io 0x0910-0x091f] [ 0.831948] pnp 00:0b: [io 0xfe00-0xfefe] [ 0.831950] pnp 00:0b: [mem 0xffb80000-0xffbfffff] [ 0.831953] pnp 00:0b: [mem 0xfec10000-0xfec1001f] [ 0.831955] pnp 00:0b: [mem 0xfed40000-0xfed44fff] [ 0.832043] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.832090] system 00:0b: [io 0x040b] has been reserved [ 0.832137] system 00:0b: [io 0x04d6] has been reserved [ 0.832183] system 00:0b: [io 0x0c00-0x0c01] has been reserved [ 0.832230] system 00:0b: [io 0x0c14] has been reserved [ 0.832277] system 00:0b: [io 0x0c50-0x0c51] has been reserved [ 0.832324] system 00:0b: [io 0x0c52] has been reserved [ 0.832370] system 00:0b: [io 0x0c6c] has been reserved [ 0.832417] system 00:0b: [io 0x0c6f] has been reserved [ 0.832464] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved [ 0.832511] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved [ 0.832558] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved [ 0.832605] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved [ 0.832652] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved [ 0.832699] system 00:0b: [io 0x0b00-0x0b3f] has been reserved [ 0.832746] system 00:0b: [io 0x0800-0x089f] has been reserved [ 0.832793] system 00:0b: [io 0x0b20-0x0b2f] has been reserved [ 0.832840] system 00:0b: [io 0x0900-0x090f] has been reserved [ 0.832887] system 00:0b: [io 0x0910-0x091f] has been reserved [ 0.832934] system 00:0b: [io 0xfe00-0xfefe] has been reserved [ 0.832981] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.833029] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.833076] system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.833123] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.833292] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled] [ 0.833295] pnp 00:0c: [io 0x0230-0x023f] [ 0.833297] pnp 00:0c: [io 0x0290-0x029f] [ 0.833299] pnp 00:0c: [io 0x0300-0x030f] [ 0.833301] pnp 00:0c: [io 0x0a30-0x0a3f] [ 0.833363] system 00:0c: [io 0x0230-0x023f] has been reserved [ 0.833413] system 00:0c: [io 0x0290-0x029f] has been reserved [ 0.833460] system 00:0c: [io 0x0300-0x030f] has been reserved [ 0.833506] system 00:0c: [io 0x0a30-0x0a3f] has been reserved [ 0.833553] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.833603] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 0.833660] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.833708] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.840199] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.840201] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 0.840204] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 0.840206] pnp 00:0e: [mem 0x00100000-0xcfffffff] [ 0.840208] pnp 00:0e: [mem 0xfed45000-0xffffffff] [ 0.840281] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.840333] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.840381] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.840428] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.840476] system 00:0e: [mem 0xfed45000-0xffffffff] could not be reserved [ 0.840523] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.840647] pnp: PnP ACPI: found 15 devices [ 0.840692] ACPI: ACPI bus type pnp unregistered [ 0.846959] PCI: max bus depth: 1 pci_try_num: 2 [ 0.846980] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.847029] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.847077] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.847125] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.847177] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.847224] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.847271] pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.847319] pci 0000:00:06.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] [ 0.847371] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.847416] pci 0000:00:14.4: bridge window [io disabled] [ 0.847466] pci 0000:00:14.4: bridge window [mem disabled] [ 0.847514] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.847581] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.847630] pci 0000:00:02.0: setting latency timer to 64 [ 0.847636] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.847683] pci 0000:00:06.0: setting latency timer to 64 [ 0.847692] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.847694] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.847696] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.847699] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.847701] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff] [ 0.847703] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff] [ 0.847706] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.847708] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.847711] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.847713] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.847715] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.847718] pci_bus 0000:02: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref] [ 0.847721] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.847723] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.847725] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.847728] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.847730] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff] [ 0.847733] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed44fff] [ 0.847776] NET: Registered protocol family 2 [ 0.848102] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.850361] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.854065] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.854578] TCP: Hash tables configured (established 524288 bind 65536) [ 0.854626] TCP reno registered [ 0.854695] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.854821] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.855046] NET: Registered protocol family 1 [ 1.040033] pci 0000:01:00.0: Boot video device [ 1.040042] PCI: CLS 64 bytes, default 64 [ 1.041145] PCI-DMA: Disabling AGP. [ 1.041268] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.041314] PCI-DMA: using GART IOMMU. [ 1.041362] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.044408] audit: initializing netlink socket (disabled) [ 1.044472] type=2000 audit(1310054240.040:1): initialized [ 1.090081] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.142827] VFS: Disk quotas dquot_6.5.2 [ 1.142939] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.143673] fuse init (API version 7.16) [ 1.143836] msgmni has been set to 15998 [ 1.144181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.144279] io scheduler noop registered [ 1.144327] io scheduler deadline registered [ 1.144418] io scheduler cfq registered (default) [ 1.144616] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.144650] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.144747] pcieport 0000:00:06.0: setting latency timer to 64 [ 1.144773] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 1.144860] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.144937] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.145109] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.145168] ACPI: Power Button [PWRB] [ 1.145256] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.145313] ACPI: Power Button [PWRF] [ 1.145521] ACPI: acpi_idle registered with cpuidle [ 1.240417] ERST: Table is not found! [ 1.240532] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.261240] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.430837] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.431167] Linux agpgart interface v0.103 [ 1.432332] brd: module loaded [ 1.432909] loop: module loaded [ 1.433293] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.433375] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 1.433753] Fixed MDIO Bus: probed [ 1.433826] PPP generic driver version 2.4.2 [ 1.433911] tun: Universal TUN/TAP device driver, 1.6 [ 1.433966] tun: (C) 1999-2004 Max Krasnyansky [ 1.434097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.434198] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.434269] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.434365] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.434426] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.434501] QUIRK: Enable AMD PLL fix [ 1.434504] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.434566] ehci_hcd 0000:00:12.2: debug port 1 [ 1.434636] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbdff000 [ 1.450027] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.450179] hub 1-0:1.0: USB hub found [ 1.450231] hub 1-0:1.0: 6 ports detected [ 1.450406] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.450464] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.450549] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.450613] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.450674] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.450736] ehci_hcd 0000:00:13.2: debug port 1 [ 1.450797] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbdfa800 [ 1.470024] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.470156] hub 2-0:1.0: USB hub found [ 1.470207] hub 2-0:1.0: 6 ports detected [ 1.470347] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.470448] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.470506] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.470586] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.470659] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbdfe000 [ 1.534116] hub 3-0:1.0: USB hub found [ 1.535859] hub 3-0:1.0: 3 ports detected [ 1.536019] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.536076] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.536154] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.536220] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbdfd000 [ 1.594119] hub 4-0:1.0: USB hub found [ 1.594173] hub 4-0:1.0: 3 ports detected [ 1.594329] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.594388] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.594472] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.594555] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbdfc000 [ 1.654117] hub 5-0:1.0: USB hub found [ 1.654171] hub 5-0:1.0: 3 ports detected [ 1.654334] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.654390] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.654482] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.654551] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbdfb000 [ 1.714116] hub 6-0:1.0: USB hub found [ 1.714171] hub 6-0:1.0: 3 ports detected [ 1.714332] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.714388] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.714468] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.714535] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbdf9000 [ 1.770034] usb 1-3: new high speed USB device number 2 using ehci_hcd [ 1.774117] hub 7-0:1.0: USB hub found [ 1.774168] hub 7-0:1.0: 2 ports detected [ 1.774287] uhci_hcd: USB Universal Host Controller Interface driver [ 1.774412] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.774848] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.774897] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.775009] mousedev: PS/2 mouse device common for all mice [ 1.775159] rtc_cmos 00:03: RTC can wake from S4 [ 1.775303] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.775385] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.775531] device-mapper: uevent: version 1.0.3 [ 1.775644] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 1.775780] device-mapper: multipath: version 1.3.0 loaded [ 1.775829] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.775973] cpuidle: using governor ladder [ 1.776018] cpuidle: using governor menu [ 1.776063] EFI Variables Facility v0.08 2004-May-17 [ 1.776328] TCP cubic registered [ 1.776491] NET: Registered protocol family 10 [ 1.776973] NET: Registered protocol family 17 [ 1.777041] Registering the dns_resolver key type [ 1.777198] PM: Hibernation image not present or could not be loaded. [ 1.777212] registered taskstats version 1 [ 1.802993] Magic number: 3:564:992 [ 1.803132] rtc_cmos 00:03: setting system clock to 2011-07-07 15:57:21 UTC (1310054241) [ 1.803189] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00) [ 1.803274] powernow-k8: fid 0x12 (2600 MHz), vid 0xc [ 1.803320] powernow-k8: fid 0x10 (2400 MHz), vid 0xe [ 1.803365] powernow-k8: fid 0xe (2200 MHz), vid 0x10 [ 1.803411] powernow-k8: fid 0xc (2000 MHz), vid 0x10 [ 1.803457] powernow-k8: fid 0xa (1800 MHz), vid 0x10 [ 1.803502] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 1.803807] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.803862] EDD information not available. [ 1.805649] Freeing unused kernel memory: 988k freed [ 1.806078] Write protecting the kernel read-only data: 10240k [ 1.810779] Freeing unused kernel memory: 1400k freed [ 1.832565] xvmalloc: exports duplicate symbol xv_create_pool (owned by kernel) [ 1.864775] udevd[100]: starting version 171 [ 1.935297] ahci 0000:00:11.0: version 3.0 [ 1.935327] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.935509] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.935562] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.938608] scsi0 : ahci [ 1.942860] scsi1 : ahci [ 1.946539] scsi2 : ahci [ 1.949013] scsi3 : ahci [ 1.949203] ata1: SATA max UDMA/133 abar m1024@0xfbdff800 port 0xfbdff900 irq 22 [ 1.949255] ata2: SATA max UDMA/133 abar m1024@0xfbdff800 port 0xfbdff980 irq 22 [ 1.949307] ata3: SATA max UDMA/133 abar m1024@0xfbdff800 port 0xfbdffa00 irq 22 [ 1.949358] ata4: SATA max UDMA/133 abar m1024@0xfbdff800 port 0xfbdffa80 irq 22 [ 1.954911] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.954995] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.955084] r8169 0000:02:00.0: setting latency timer to 64 [ 1.955131] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 1.955546] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000c72000, 00:24:8c:d6:ab:ef, XID 1c4000c0 IRQ 42 [ 1.955634] scsi4 : pata_atiixp [ 1.957458] scsi5 : pata_atiixp [ 1.958117] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.958165] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.986362] Floppy drive(s): fd0 is 1.44M [ 2.004091] FDC 0 is a post-1991 82077 [ 2.160391] ata6.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100 [ 2.160445] ata6.01: ATAPI: TSSTcorp CDDVDW SH-S223C, SB02, max UDMA/100 [ 2.200428] ata6.00: configured for UDMA/100 [ 2.240362] ata6.01: configured for UDMA/100 [ 2.260028] usb 1-4: new high speed USB device number 3 using ehci_hcd [ 2.490029] ata1: softreset failed (device not ready) [ 2.490080] ata1: applying SB600 PMP SRST workaround and retrying [ 2.500028] ata3: softreset failed (device not ready) [ 2.500075] ata3: applying SB600 PMP SRST workaround and retrying [ 2.500137] ata4: softreset failed (device not ready) [ 2.500184] ata4: applying SB600 PMP SRST workaround and retrying [ 2.500245] ata2: softreset failed (device not ready) [ 2.500291] ata2: applying SB600 PMP SRST workaround and retrying [ 2.690039] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.691020] ata1.00: ATA-8: ST3250312AS, JC45, max UDMA/133 [ 2.691067] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.692247] ata1.00: configured for UDMA/133 [ 2.692440] scsi 0:0:0:0: Direct-Access ATA ST3250312AS JC45 PQ: 0 ANSI: 5 [ 2.692659] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.692727] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.692827] sd 0:0:0:0: [sda] Write Protect is off [ 2.692878] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.692923] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.699078] sda: sda1 sda2 [ 2.699408] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.700048] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.700117] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.700182] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.701629] ata3.00: ATA-8: WDC WD10EARS-003BB1, 80.00A80, max UDMA/133 [ 2.701677] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.702119] ata2.00: ATA-8: WDC WD10EARS-003BB1, 80.00A80, max UDMA/133 [ 2.702172] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.702230] ata4.00: ATA-8: WDC WD10EARS-003BB1, 80.00A80, max UDMA/133 [ 2.702280] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.703456] ata3.00: configured for UDMA/133 [ 2.704738] ata4.00: configured for UDMA/133 [ 2.705333] ata2.00: configured for UDMA/133 [ 2.705484] scsi 1:0:0:0: Direct-Access ATA WDC WD10EARS-003 80.0 PQ: 0 ANSI: 5 [ 2.705674] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.705678] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.705783] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-003 80.0 PQ: 0 ANSI: 5 [ 2.705819] sd 1:0:0:0: [sdb] Write Protect is off [ 2.705822] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.705840] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.706030] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.706173] scsi 3:0:0:0: Direct-Access ATA WDC WD10EARS-003 80.0 PQ: 0 ANSI: 5 [ 2.706334] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 2.706560] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.706581] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.706624] sd 3:0:0:0: [sdd] Write Protect is off [ 2.706626] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.706644] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.706800] sd 2:0:0:0: [sdc] Write Protect is off [ 2.706852] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.706873] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.709875] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01 PQ: 0 ANSI: 5 [ 2.719015] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.719067] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.719230] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 2.719298] sr 5:0:0:0: Attached scsi generic sg4 type 5 [ 2.723505] scsi 5:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB02 PQ: 0 ANSI: 5 [ 2.726722] sr1: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.726866] sr 5:0:1:0: Attached scsi CD-ROM sr1 [ 2.726924] sr 5:0:1:0: Attached scsi generic sg5 type 5 [ 2.734943] sdd: sdd1 sdd2 < sdd5 > [ 2.736988] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.742161] sdc: sdc1 sdc2 < sdc5 > [ 2.742475] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.747191] sdb: sdb1 sdb2 < sdb5 > [ 2.747506] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.960033] usb 5-3: new full speed USB device number 2 using ohci_hcd [ 3.167340] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input2 [ 3.167481] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-3/input0 [ 3.172574] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input3 [ 3.172768] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input1 [ 3.181134] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input2 [ 3.181201] usbcore: registered new interface driver usbhid [ 3.181247] usbhid: USB HID core driver [ 3.490055] usb 6-1: new full speed USB device number 2 using ohci_hcd [ 3.567335] Btrfs loaded [ 3.572534] xor: automatically using best checksumming function: generic_sse [ 3.620013] generic_sse: 8160.000 MB/sec [ 3.620021] xor: using function: generic_sse (8160.000 MB/sec) [ 3.620605] device-mapper: dm-raid45: initialized v0.2594b [ 3.695360] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input4 [ 3.695480] generic-usb 0003:046D:C526.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-1/input0 [ 3.703182] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/input/input5 [ 3.703313] generic-usb 0003:046D:C526.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-1/input1 [ 16.698966] end_request: I/O error, dev fd0, sector 0 [ 17.234685] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 26.569325] udevd[439]: starting version 171 [ 26.621755] lp: driver loaded but no devices found [ 26.641624] Adding 8386556k swap on /dev/sdb5. Priority:-1 extents:1 across:8386556k [ 26.777038] parport_pc 00:07: reported by Plug and Play ACPI [ 26.777124] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 26.846809] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 26.847356] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 26.848024] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 26.848732] MCE: In-kernel MCE decoding enabled. [ 26.849520] EDAC MC: Ver: 2.1.0 [ 26.850398] lp0: using parport0 (interrupt-driven). [ 26.858920] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 26.868242] AMD64 EDAC driver v3.4.0 [ 26.871426] EDAC amd64: DRAM ECC disabled. [ 26.871434] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 26.871436] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 26.871437] (Note that use of the override may cause unknown side effects.) [ 26.886228] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 26.981331] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 26.981413] HDA Intel 0000:01:00.1: irq 43 for MSI/MSI-X [ 26.981439] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 27.031218] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0 [ 27.033262] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6 [ 27.093261] type=1400 audit(1310054266.781:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=586 comm="apparmor_parser" [ 27.093282] type=1400 audit(1310054266.781:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=767 comm="apparmor_parser" [ 27.093580] type=1400 audit(1310054266.781:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=586 comm="apparmor_parser" [ 27.093603] type=1400 audit(1310054266.781:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=767 comm="apparmor_parser" [ 27.093781] type=1400 audit(1310054266.781:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=586 comm="apparmor_parser" [ 27.093810] type=1400 audit(1310054266.781:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=767 comm="apparmor_parser" [ 27.118483] ppdev: user-space parallel port driver [ 27.135657] NET: Registered protocol family 4 [ 27.144544] NET: Registered protocol family 5 [ 27.240601] Linux video capture interface: v2.00 [ 27.250373] uvcvideo: Found UVC 1.00 device (046d:0809) [ 27.270368] input: UVC Camera (046d:0809) as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input7 [ 27.271244] usbcore: registered new interface driver uvcvideo [ 27.271249] USB Video Class driver (v1.1.0) [ 27.656402] set resolution quirk: cval->res = 384 [ 27.656951] usbcore: registered new interface driver snd-usb-audio [ 27.820778] init: udev-fallback-graphics main process (948) terminated with status 1 [ 58.212230] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 58.297178] type=1400 audit(1310054297.981:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1017 comm="apparmor_parser" [ 58.297861] type=1400 audit(1310054297.981:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1017 comm="apparmor_parser" [ 58.298067] type=1400 audit(1310054297.981:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1017 comm="apparmor_parser" [ 58.301525] type=1400 audit(1310054297.991:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1018 comm="apparmor_parser" [ 58.318683] type=1400 audit(1310054298.001:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1018 comm="apparmor_parser" [ 58.320076] type=1400 audit(1310054298.011:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1033 comm="apparmor_parser" [ 58.323422] type=1400 audit(1310054298.011:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1033 comm="apparmor_parser" [ 58.331981] type=1400 audit(1310054298.021:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1018 comm="apparmor_parser" [ 58.334025] type=1400 audit(1310054298.021:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1035 comm="apparmor_parser" [ 58.339491] type=1400 audit(1310054298.021:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1035 comm="apparmor_parser" [ 58.420328] r8169 0000:02:00.0: eth0: link down [ 58.420336] r8169 0000:02:00.0: eth0: link down [ 58.422686] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 58.431604] init: plymouth-stop pre-start process (1082) terminated with status 1 [ 60.432667] r8169 0000:02:00.0: eth0: link up [ 60.433628] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 70.680012] eth0: no IPv6 routers present [ 151.241917] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 151.487149] init: plymouth-stop pre-start process (1661) terminated with status 1