[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-10-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #44-Ubuntu SMP Thu Jun 2 21:32:22 UTC 2011 (Ubuntu 2.6.38-10.44-generic 2.6.38.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-generic root=UUID=a96edcec-a38a-4123-9287-c0693ec1f1a3 ro vga=789 quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000009fff0000 (usable) [ 0.000000] BIOS-e820: 000000009fff0000 - 000000009fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009fff3000 - 00000000a0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.2 present. [ 0.000000] DMI: /nForce, BIOS 6.00 PG 09/02/2005 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ a0000000 old size 32 MB [ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB [ 0.000000] Aperture from AGP @ a0000000 size 32 MB (APSIZE 0) [ 0.000000] last_pfn = 0x9fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back [ 0.000000] 2 base 00A0000000 mask FFE0000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f5ef0] f5ef0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000009fff0000 [ 0.000000] 0000000000 - 009fe00000 page 2M [ 0.000000] 009fe00000 - 009fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 9fff0000 @ 1fffb000-20000000 [ 0.000000] RAMDISK: 36f5b000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f7920 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 000000009fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000009fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000009fff30c0 050E5 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000009fff0000 00040 [ 0.000000] ACPI: APIC 000000009fff81c0 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000009fff0000 [ 0.000000] Initmem setup node 0 0000000000000000-000000009fff0000 [ 0.000000] NODE_DATA [000000009ffeb000 - 000000009ffeffff] [ 0.000000] [ffffea0000000000-ffffea00023fffff] PMD -> [ffff88009ce00000-ffff88009f1fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0009fff0 [ 0.000000] On node 0 totalpages: 655231 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8904 pages used for memmap [ 0.000000] DMA32 zone: 642344 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:5ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88009fc00000 s84416 r8192 d22080 u2097152 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 646265 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-generic root=UUID=a96edcec-a38a-4123-9287-c0693ec1f1a3 ro vga=789 quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ a0000000 old size 32 MB [ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB [ 0.000000] Aperture from AGP @ a0000000 size 32 MB (APSIZE 0) [ 0.000000] Node 0: aperture @ a0000000 size 512 MB [ 0.000000] Memory: 2553448k/2621376k available (5941k kernel code, 452k absent, 67476k reserved, 5016k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:256 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 26214400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2209.813 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.62 BogoMIPS (lpj=22098130) [ 0.010012] pid_max: default: 32768 minimum: 301 [ 0.010060] Security Framework initialized [ 0.010106] AppArmor: AppArmor initialized [ 0.010108] Yama: becoming mindful. [ 0.010711] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.026750] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.030160] Mount-cache hash table entries: 256 [ 0.030478] Initializing cgroup subsys ns [ 0.030484] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.030488] Initializing cgroup subsys cpuacct [ 0.030494] Initializing cgroup subsys memory [ 0.030516] Initializing cgroup subsys devices [ 0.030519] Initializing cgroup subsys freezer [ 0.030522] Initializing cgroup subsys net_cls [ 0.030524] Initializing cgroup subsys blkio [ 0.030594] tseg: 0000000000 [ 0.030623] mce: CPU supports 5 MCE banks [ 0.030689] SMP alternatives: switching to UP code [ 0.038998] Freeing SMP alternatives: 20k freed [ 0.039017] ACPI: Core revision 20110112 [ 0.050064] ftrace: allocating 24324 entries in 96 pages [ 0.060207] Setting APIC routing to flat [ 0.060501] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.162253] CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 08 [ 0.170000] Performance Events: AMD PMU driver. [ 0.170000] ... version: 0 [ 0.170000] ... bit width: 48 [ 0.170000] ... generic registers: 4 [ 0.170000] ... value mask: 0000ffffffffffff [ 0.170000] ... max period: 00007fffffffffff [ 0.170000] ... fixed-purpose events: 0 [ 0.170000] ... event mask: 000000000000000f [ 0.170000] Brought up 1 CPUs [ 0.170000] Total of 1 processors activated (4419.62 BogoMIPS). [ 0.170000] devtmpfs: initialized [ 0.170000] print_constraints: dummy: [ 0.170000] Time: 12:04:57 Date: 06/06/11 [ 0.170000] NET: Registered protocol family 16 [ 0.170000] node 0 link 0: io port [1000, fffff] [ 0.170000] TOM: 00000000c0000000 aka 3072M [ 0.170000] node 0 link 0: mmio [a0000, bffff] [ 0.170000] node 0 link 0: mmio [c0000000, fed3ffff] [ 0.170000] bus: [00, ff] on node 0 link 0 [ 0.170000] bus: 00 index 0 [io 0x0000-0xffff] [ 0.170000] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.170000] bus: 00 index 2 [mem 0xc0000000-0xfcffffffff] [ 0.170000] ACPI: bus type pci registered [ 0.170000] PCI: Using configuration type 1 for base access [ 0.170000] bio: create slab at 0 [ 0.170000] ACPI: EC: Look up EC in DSDT [ 0.170000] ACPI: Interpreter enabled [ 0.170000] ACPI: (supports S0 S1 S3 S4 S5) [ 0.170000] ACPI: Using IOAPIC for interrupt routing [ 0.170522] ACPI: Power Resource [ISAV] (on) [ 0.175666] ACPI: No dock devices found. [ 0.175669] HEST: Table not found. [ 0.175673] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.175730] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.175842] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.175846] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.175848] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.175851] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.175854] pci_root PNP0A03:00: host bridge window [mem 0xa0000000-0xfebfffff] (ignored) [ 0.175871] pci 0000:00:00.0: [10de:00e1] type 0 class 0x000600 [ 0.175879] pci 0000:00:00.0: reg 10: [mem 0xa0000000-0xbfffffff pref] [ 0.175929] pci 0000:00:01.0: [10de:00e0] type 0 class 0x000601 [ 0.175959] pci 0000:00:01.1: [10de:00e4] type 0 class 0x000c05 [ 0.175966] pci 0000:00:01.1: reg 10: [io 0xe400-0xe41f] [ 0.175977] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f] [ 0.175981] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f] [ 0.175992] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.175995] pci 0000:00:01.1: PME# disabled [ 0.176011] pci 0000:00:02.0: [10de:00e7] type 0 class 0x000c03 [ 0.176018] pci 0000:00:02.0: reg 10: [mem 0xd2004000-0xd2004fff] [ 0.176039] pci 0000:00:02.0: supports D1 D2 [ 0.176042] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176045] pci 0000:00:02.0: PME# disabled [ 0.176056] pci 0000:00:02.1: [10de:00e7] type 0 class 0x000c03 [ 0.176063] pci 0000:00:02.1: reg 10: [mem 0xd2005000-0xd2005fff] [ 0.176084] pci 0000:00:02.1: supports D1 D2 [ 0.176086] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176089] pci 0000:00:02.1: PME# disabled [ 0.176102] pci 0000:00:02.2: [10de:00e8] type 0 class 0x000c03 [ 0.176110] pci 0000:00:02.2: reg 10: [mem 0xd2000000-0xd20000ff] [ 0.176134] pci 0000:00:02.2: supports D1 D2 [ 0.176136] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176139] pci 0000:00:02.2: PME# disabled [ 0.176158] pci 0000:00:05.0: [10de:00df] type 0 class 0x000680 [ 0.176165] pci 0000:00:05.0: reg 10: [mem 0xd2001000-0xd2001fff] [ 0.176169] pci 0000:00:05.0: reg 14: [io 0xb800-0xb807] [ 0.176188] pci 0000:00:05.0: supports D1 D2 [ 0.176190] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176193] pci 0000:00:05.0: PME# disabled [ 0.176205] pci 0000:00:06.0: [10de:00ea] type 0 class 0x000401 [ 0.176213] pci 0000:00:06.0: reg 10: [io 0xbc00-0xbcff] [ 0.176217] pci 0000:00:06.0: reg 14: [io 0xc000-0xc07f] [ 0.176222] pci 0000:00:06.0: reg 18: [mem 0xd2002000-0xd2002fff] [ 0.176238] pci 0000:00:06.0: supports D1 D2 [ 0.176253] pci 0000:00:08.0: [10de:00e5] type 0 class 0x000101 [ 0.176269] pci 0000:00:08.0: reg 20: [io 0xf000-0xf00f] [ 0.176292] pci 0000:00:0a.0: [10de:00e3] type 0 class 0x000101 [ 0.176299] pci 0000:00:0a.0: reg 10: [io 0x09f0-0x09f7] [ 0.176304] pci 0000:00:0a.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.176308] pci 0000:00:0a.0: reg 18: [io 0x0970-0x0977] [ 0.176313] pci 0000:00:0a.0: reg 1c: [io 0x0b70-0x0b73] [ 0.176317] pci 0000:00:0a.0: reg 20: [io 0xdc00-0xdc0f] [ 0.176322] pci 0000:00:0a.0: reg 24: [io 0xe000-0xe07f] [ 0.176341] pci 0000:00:0b.0: [10de:00e2] type 1 class 0x000604 [ 0.176371] pci 0000:00:0e.0: [10de:00ed] type 1 class 0x000604 [ 0.176395] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.176414] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.176431] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.176449] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.176465] PCI: peer root bus 00 res updated from pci conf [ 0.176497] pci 0000:01:00.0: [1002:9505] type 0 class 0x000300 [ 0.176515] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.176524] pci 0000:01:00.0: reg 14: [io 0xa000-0xa0ff] [ 0.176534] pci 0000:01:00.0: reg 18: [mem 0xd1000000-0xd100ffff] [ 0.176562] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.176585] pci 0000:01:00.0: supports D1 D2 [ 0.176619] pci 0000:00:0b.0: PCI bridge to [bus 01-01] [ 0.176623] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 0.176627] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.176631] pci 0000:00:0b.0: bridge window [mem 0xc0000000-0xcfffffff pref] [ 0.176661] pci 0000:00:0e.0: PCI bridge to [bus 02-02] [ 0.176664] pci 0000:00:0e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.176667] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.176671] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.176679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.176763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.176899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.202653] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.202700] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.202745] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.202790] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.202837] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.202890] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.202935] ACPI: PCI Interrupt Link [LUBB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.202981] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.203026] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.203072] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.203117] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.203163] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.203212] ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.203260] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.203315] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.203361] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.203412] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.203465] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.203514] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 0.203550] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 0.203593] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [ 0.203630] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. [ 0.203666] ACPI: PCI Interrupt Link [APC5] (IRQs *16) [ 0.203729] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.203791] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0 [ 0.203854] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.203916] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled. [ 0.203979] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.204042] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.204082] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 0.204147] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.204210] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.204273] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled. [ 0.204336] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.204405] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 0.204475] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.204618] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.204621] vgaarb: loaded [ 0.204867] SCSI subsystem initialized [ 0.204997] libata version 3.00 loaded. [ 0.205066] usbcore: registered new interface driver usbfs [ 0.205078] usbcore: registered new interface driver hub [ 0.205112] usbcore: registered new device driver usb [ 0.205237] wmi: Mapper loaded [ 0.205239] PCI: Using ACPI for IRQ routing [ 0.205243] PCI: pci_cache_line_size set to 64 bytes [ 0.205251] pci 0000:00:00.0: no compatible bridge window for [mem 0xa0000000-0xbfffffff pref] [ 0.205288] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.205291] reserve RAM buffer: 000000009fff0000 - 000000009fffffff [ 0.205428] NetLabel: Initializing [ 0.205430] NetLabel: domain hash size = 128 [ 0.205431] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.205452] NetLabel: unlabeled traffic allowed by default [ 0.217561] AppArmor: AppArmor Filesystem Enabled [ 0.217634] pnp: PnP ACPI init [ 0.217663] ACPI: bus type pnp registered [ 0.217721] pnp 00:00: [io 0x4000-0x407f] [ 0.217723] pnp 00:00: [io 0x4080-0x40ff] [ 0.217725] pnp 00:00: [io 0x4400-0x447f] [ 0.217727] pnp 00:00: [io 0x4480-0x44ff] [ 0.217729] pnp 00:00: [io 0x4800-0x487f] [ 0.217732] pnp 00:00: [io 0x4880-0x48ff] [ 0.217847] system 00:00: [io 0x4000-0x407f] has been reserved [ 0.217850] system 00:00: [io 0x4080-0x40ff] has been reserved [ 0.217853] system 00:00: [io 0x4400-0x447f] has been reserved [ 0.217855] system 00:00: [io 0x4480-0x44ff] has been reserved [ 0.217858] system 00:00: [io 0x4800-0x487f] has been reserved [ 0.217861] system 00:00: [io 0x4880-0x48ff] has been reserved [ 0.217867] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218069] pnp 00:01: [mem 0x000d0000-0x000d3fff] [ 0.218072] pnp 00:01: [mem 0x000f0000-0x000f7fff] [ 0.218074] pnp 00:01: [mem 0x000f8000-0x000fbfff] [ 0.218076] pnp 00:01: [mem 0x000fc000-0x000fffff] [ 0.218078] pnp 00:01: [mem 0x9fff0000-0x9fffffff] [ 0.218081] pnp 00:01: [mem 0xffff0000-0xffffffff] [ 0.218083] pnp 00:01: [mem 0x00000000-0x0009ffff] [ 0.218085] pnp 00:01: [mem 0x00100000-0x9ffeffff] [ 0.218088] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.218090] pnp 00:01: [mem 0xfee00000-0xfeefffff] [ 0.218098] pnp 00:01: [mem 0xfefff000-0xfeffffff] [ 0.218100] pnp 00:01: [mem 0xfff80000-0xfff80fff] [ 0.218103] pnp 00:01: [mem 0xfff90000-0xfffbffff] [ 0.218105] pnp 00:01: [mem 0xfffed000-0xfffeffff] [ 0.218111] pnp 00:01: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x1fffffff pref] [ 0.218115] pnp 00:01: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x1fffffff pref] [ 0.218120] pnp 00:01: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x1fffffff pref] [ 0.218123] pnp 00:01: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x1fffffff pref] [ 0.218128] pnp 00:01: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x1fffffff pref] [ 0.218132] pnp 00:01: disabling [mem 0x00100000-0x9ffeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x1fffffff pref] [ 0.218177] system 00:01: [mem 0x9fff0000-0x9fffffff] could not be reserved [ 0.218181] system 00:01: [mem 0xffff0000-0xffffffff] has been reserved [ 0.218184] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.218187] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.218190] system 00:01: [mem 0xfefff000-0xfeffffff] could not be reserved [ 0.218193] system 00:01: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.218196] system 00:01: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.218199] system 00:01: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.218203] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.218278] pnp 00:02: [bus 00-ff] [ 0.218281] pnp 00:02: [io 0x0cf8-0x0cff] [ 0.218283] pnp 00:02: [io 0x0cf0-0x0cf3] [ 0.218285] pnp 00:02: [io 0x0000-0x0cf7 window] [ 0.218288] pnp 00:02: [io 0x0d00-0xffff window] [ 0.218290] pnp 00:02: [mem 0x000a0000-0x000bffff window] [ 0.218293] pnp 00:02: [mem 0x000c0000-0x000dffff window] [ 0.218295] pnp 00:02: [mem 0xa0000000-0xfebfffff window] [ 0.218386] pnp 00:02: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.218924] pnp 00:03: [io 0x0010-0x001f] [ 0.218927] pnp 00:03: [io 0x0022-0x003f] [ 0.218929] pnp 00:03: [io 0x0044-0x005f] [ 0.218931] pnp 00:03: [io 0x0062-0x0063] [ 0.218933] pnp 00:03: [io 0x0065-0x006f] [ 0.218935] pnp 00:03: [io 0x0074-0x007f] [ 0.218937] pnp 00:03: [io 0x0091-0x0093] [ 0.218939] pnp 00:03: [io 0x00a2-0x00bf] [ 0.218941] pnp 00:03: [io 0x00e0-0x00ef] [ 0.218944] pnp 00:03: [io 0x04d0-0x04d1] [ 0.218946] pnp 00:03: [io 0x0294-0x0297] [ 0.218948] pnp 00:03: [io 0x04e0-0x04e7] [ 0.219013] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.219016] system 00:03: [io 0x0294-0x0297] has been reserved [ 0.219019] system 00:03: [io 0x04e0-0x04e7] has been reserved [ 0.219023] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219037] pnp 00:04: [dma 4] [ 0.219039] pnp 00:04: [io 0x0000-0x000f] [ 0.219041] pnp 00:04: [io 0x0080-0x0090] [ 0.219043] pnp 00:04: [io 0x0094-0x009f] [ 0.219045] pnp 00:04: [io 0x00c0-0x00df] [ 0.219095] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.219107] pnp 00:05: [io 0x0070-0x0073] [ 0.219127] pnp 00:05: [irq 8] [ 0.219177] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.219190] pnp 00:06: [io 0x0061] [ 0.219233] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.219243] pnp 00:07: [io 0x00f0-0x00ff] [ 0.219248] pnp 00:07: [irq 13] [ 0.219300] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.219412] pnp 00:08: [io 0x03f0-0x03f5] [ 0.219414] pnp 00:08: [io 0x03f7] [ 0.219419] pnp 00:08: [irq 6] [ 0.219421] pnp 00:08: [dma 2] [ 0.219481] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.219834] pnp 00:09: [irq 12] [ 0.219884] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.219909] pnp 00:0a: [io 0x0060] [ 0.219911] pnp 00:0a: [io 0x0064] [ 0.219916] pnp 00:0a: [irq 1] [ 0.220013] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.220170] pnp: PnP ACPI: found 11 devices [ 0.220172] ACPI: ACPI bus type pnp unregistered [ 0.226839] Switching to clocksource acpi_pm [ 0.226888] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref] [ 0.226892] pci 0000:00:0b.0: PCI bridge to [bus 01-01] [ 0.226896] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 0.226901] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.226905] pci 0000:00:0b.0: bridge window [mem 0xc0000000-0xcfffffff pref] [ 0.226911] pci 0000:00:0e.0: PCI bridge to [bus 02-02] [ 0.226913] pci 0000:00:0e.0: bridge window [io disabled] [ 0.226916] pci 0000:00:0e.0: bridge window [mem disabled] [ 0.226918] pci 0000:00:0e.0: bridge window [mem pref disabled] [ 0.226932] pci 0000:00:0e.0: setting latency timer to 64 [ 0.226936] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.226938] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.226941] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xfcffffffff] [ 0.226944] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.226946] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff] [ 0.226949] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref] [ 0.227022] NET: Registered protocol family 2 [ 0.227244] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.227244] Switched to NOHz mode on CPU #0 [ 0.227244] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.236571] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.238271] TCP: Hash tables configured (established 524288 bind 65536) [ 0.238275] TCP reno registered [ 0.238295] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.238441] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.238701] NET: Registered protocol family 1 [ 0.300061] pci 0000:01:00.0: Boot video device [ 0.300065] PCI: CLS 32 bytes, default 64 [ 0.300259] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1] [ 0.300266] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB [ 0.300273] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP [ 0.322062] Trying to unpack rootfs image as initramfs... [ 0.350407] agpgart-amd64 0000:00:00.0: AGP aperture is 512M @ 0xa0000000 [ 0.350849] audit: initializing netlink socket (disabled) [ 0.350870] type=2000 audit(1307361897.349:1): initialized [ 0.380769] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.390211] VFS: Disk quotas dquot_6.5.2 [ 0.390386] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.391246] fuse init (API version 7.16) [ 0.391350] msgmni has been set to 4987 [ 0.400504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.400611] io scheduler noop registered [ 0.400613] io scheduler deadline registered [ 0.400661] io scheduler cfq registered (default) [ 0.400911] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.400942] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.401156] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.401166] ACPI: Power Button [PWRB] [ 0.401236] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.401240] ACPI: Power Button [PWRF] [ 0.401298] ACPI: Fan [FAN] (on) [ 0.401633] ACPI: acpi_idle registered with cpuidle [ 0.401660] ACPI: processor limited to max C-state 1 [ 0.404016] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.404019] ACPI: Thermal Zone [THRM] (22 C) [ 0.404107] ERST: Table is not found! [ 0.404240] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.405482] Linux agpgart interface v0.103 [ 0.406821] brd: module loaded [ 0.407428] loop: module loaded [ 0.407531] i2c-core: driver [adp5520] using legacy suspend method [ 0.407533] i2c-core: driver [adp5520] using legacy resume method [ 0.420167] pata_acpi 0000:00:08.0: power state changed by ACPI to D0 [ 0.420175] pata_acpi 0000:00:08.0: power state changed by ACPI to D0 [ 0.420260] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.420730] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 0.420762] pata_acpi 0000:00:0a.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, high) -> IRQ 23 [ 0.420803] pata_acpi 0000:00:0a.0: setting latency timer to 64 [ 0.420810] pata_acpi 0000:00:0a.0: PCI INT A disabled [ 0.421287] Fixed MDIO Bus: probed [ 0.421327] PPP generic driver version 2.4.2 [ 0.421449] tun: Universal TUN/TAP device driver, 1.6 [ 0.421451] tun: (C) 1999-2004 Max Krasnyansky [ 0.421589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.421741] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.421749] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22 [ 0.421774] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 0.421777] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 0.421819] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 0.421875] ehci_hcd 0000:00:02.2: debug port 1 [ 0.421881] ehci_hcd 0000:00:02.2: cache line size of 32 is not supported [ 0.421906] ehci_hcd 0000:00:02.2: irq 22, io mem 0xd2000000 [ 0.440315] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 0.440600] hub 1-0:1.0: USB hub found [ 0.440608] hub 1-0:1.0: 8 ports detected [ 0.440774] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.450452] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.450490] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21 [ 0.450531] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.450535] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.450693] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.450751] ohci_hcd 0000:00:02.0: irq 21, io mem 0xd2004000 [ 0.512389] hub 2-0:1.0: USB hub found [ 0.512400] hub 2-0:1.0: 4 ports detected [ 0.520600] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 0.520640] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20 [ 0.520685] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.520689] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 0.520843] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 0.520901] ohci_hcd 0000:00:02.1: irq 20, io mem 0xd2005000 [ 0.582445] hub 3-0:1.0: USB hub found [ 0.582457] hub 3-0:1.0: 4 ports detected [ 0.582588] uhci_hcd: USB Universal Host Controller Interface driver [ 0.582802] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.585186] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.585195] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.585346] mousedev: PS/2 mouse device common for all mice [ 0.585498] rtc_cmos 00:05: RTC can wake from S4 [ 0.585579] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.585603] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.585698] device-mapper: uevent: version 1.0.3 [ 0.585780] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.589177] device-mapper: multipath: version 1.2.0 loaded [ 0.589181] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.596217] cpuidle: using governor ladder [ 0.596225] cpuidle: using governor menu [ 0.596643] TCP cubic registered [ 0.596810] NET: Registered protocol family 10 [ 0.597383] NET: Registered protocol family 17 [ 0.597413] Registering the dns_resolver key type [ 0.597446] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ (1 cpu cores) (version 2.20.00) [ 0.597499] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20110112/processor_perflib-322) [ 0.604991] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects [ 0.604993] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup [ 0.605020] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20110112/processor_perflib-322) [ 0.605214] PM: Hibernation image not present or could not be loaded. [ 0.605232] registered taskstats version 1 [ 0.605460] Magic number: 15:234:76 [ 0.605659] rtc_cmos 00:05: setting system clock to 2011-06-06 12:04:58 UTC (1307361898) [ 0.605663] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.605665] EDD information not available. [ 0.616279] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.801255] Freeing initrd memory: 16980k freed [ 0.831610] Freeing unused kernel memory: 956k freed [ 0.833239] Write protecting the kernel read-only data: 10240k [ 0.834062] Freeing unused kernel memory: 184k freed [ 0.839726] Freeing unused kernel memory: 1440k freed [ 0.863473] udev[72]: starting version 163 [ 1.018466] Floppy drive(s): fd0 is 1.44M [ 1.027837] pata_amd 0000:00:08.0: version 0.4.1 [ 1.027873] pata_amd 0000:00:08.0: power state changed by ACPI to D0 [ 1.027877] pata_amd 0000:00:08.0: power state changed by ACPI to D0 [ 1.027971] pata_amd 0000:00:08.0: setting latency timer to 64 [ 1.030504] scsi0 : pata_amd [ 1.033291] scsi1 : pata_amd [ 1.033966] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.033969] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.034917] FDC 0 is a post-1991 82077 [ 1.069711] sata_nv 0000:00:0a.0: version 3.5 [ 1.069736] sata_nv 0000:00:0a.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, high) -> IRQ 23 [ 1.069800] sata_nv 0000:00:0a.0: setting latency timer to 64 [ 1.073246] scsi2 : sata_nv [ 1.073847] scsi3 : sata_nv [ 1.074036] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 [ 1.074039] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 [ 1.075759] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.075958] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 1.075967] forcedeth 0000:00:05.0: PCI INT A -> Link[APCH] -> GSI 23 (level, high) -> IRQ 23 [ 1.075972] forcedeth 0000:00:05.0: setting latency timer to 64 [ 1.251790] ata1.00: ATA-7: Maxtor 6B200P0, BAH41B70, max UDMA/133 [ 1.251797] ata1.00: 398297088 sectors, multi 16: LBA48 [ 1.252077] ata1.01: ATA-6: HDS722516VLAT80, V34OA63A, max UDMA/100 [ 1.252080] ata1.01: 321672960 sectors, multi 16: LBA48 [ 1.252090] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c6c5c0) ACPI=0x7f01f (15:20:0x1f) [ 1.252096] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc7c6c5c0) ACPI=0x3f01f (15:20:0x1f) [ 1.291707] ata1.00: configured for UDMA/133 [ 1.350447] ata1.01: configured for UDMA/100 [ 1.350643] scsi 0:0:0:0: Direct-Access ATA Maxtor 6B200P0 BAH4 PQ: 0 ANSI: 5 [ 1.350887] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.351061] scsi 0:0:1:0: Direct-Access ATA HDS722516VLAT80 V34O PQ: 0 ANSI: 5 [ 1.351186] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.351373] sd 0:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 1.351428] sd 0:0:0:0: [sda] Write Protect is off [ 1.351431] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.351455] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.360033] Refined TSC clocksource calibration: 2210.080 MHz. [ 1.360041] Switching to clocksource tsc [ 1.383967] sd 0:0:1:0: [sdb] 321672960 512-byte logical blocks: (164 GB/153 GiB) [ 1.384014] sd 0:0:1:0: [sdb] Write Protect is off [ 1.384018] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.384038] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.400432] sda: sda1 sda2 < sda5 sda6 > [ 1.438485] sdb: sdb1 sdb2 < sdb5 > [ 1.438698] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.438783] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.550236] ata2.00: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0C, max UDMA/66 [ 1.550242] ata2.01: ATAPI: _NEC DVD_RW ND-3500AG, 2.16, max UDMA/33 [ 1.550250] ata2: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc7c6c5c0) ACPI=0x1f01f (30:60:0x1f) [ 1.550253] ata2.00: limited to UDMA/33 due to 40-wire cable [ 1.550257] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc7c6c5c0) ACPI=0x701f (30:60:0x1f) [ 1.560015] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.590166] ata2.00: configured for UDMA/33 [ 1.600951] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x3f1 @ 1, addr 00:04:61:ff:ff:ff [ 1.600955] forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2 [ 1.601344] ata3.00: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100 [ 1.601348] ata3.00: 321672960 sectors, multi 16: LBA48 [ 1.630219] ata2.01: configured for UDMA/33 [ 1.631678] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0C PQ: 0 ANSI: 5 [ 1.633989] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.633993] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.634132] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.634222] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.635734] scsi 1:0:1:0: CD-ROM _NEC DVD_RW ND-3500AG 2.16 PQ: 0 ANSI: 5 [ 1.636885] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.636976] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.637031] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.660361] ata3.00: configured for UDMA/100 [ 1.660438] scsi 2:0:0:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5 [ 1.660582] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 1.660677] sd 2:0:0:0: [sdc] 321672960 512-byte logical blocks: (164 GB/153 GiB) [ 1.660729] sd 2:0:0:0: [sdc] Write Protect is off [ 1.660732] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.660756] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.670761] sdc: sdc1 [ 1.670951] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.150020] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.170279] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133 [ 2.170282] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.210281] ata4.00: configured for UDMA/133 [ 2.210355] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 [ 2.210505] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 2.210573] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.210622] sd 3:0:0:0: [sdd] Write Protect is off [ 2.210625] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.210647] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.219980] sdd: sdd1 [ 2.220166] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.857292] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001080000, using 1920k, total 1920k [ 2.857299] vesafb: mode is 800x600x32, linelength=3200, pages=0 [ 2.857302] vesafb: scrolling: redraw [ 2.857306] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 2.859114] Console: switching to colour frame buffer device 100x37 [ 2.889326] fb0: VESA VGA frame buffer device [ 3.262374] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 15.201790] Adding 6567932k swap on /dev/sdb5. Priority:-1 extents:1 across:6567932k [ 15.236417] udev[360]: starting version 163 [ 15.238538] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 15.622462] i2c i2c-0: nForce2 SMBus adapter at 0x4c00 [ 15.622510] i2c i2c-1: nForce2 SMBus adapter at 0x4c40 [ 15.662527] type=1400 audit(1307376313.553:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=455 comm="apparmor_parser" [ 15.662829] type=1400 audit(1307376313.553:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=455 comm="apparmor_parser" [ 15.662998] type=1400 audit(1307376313.553:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=455 comm="apparmor_parser" [ 15.698839] lp: driver loaded but no devices found [ 15.787480] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.436497] MCE: In-kernel MCE decoding enabled. [ 16.715998] EDAC MC: Ver: 2.1.0 Jun 2 2011 [ 16.755981] EDAC amd64_edac: v3.3.0 [ 16.758693] EDAC amd64: DRAM ECC disabled. [ 16.758707] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 16.758709] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 16.758710] (Note that use of the override may cause unknown side effects.) [ 17.398992] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3 [ 17.493418] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 17.493430] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, high) -> IRQ 22 [ 17.493473] Intel ICH 0000:00:06.0: setting latency timer to 64 [ 17.830013] intel8x0_measure_ac97_clock: measured 50462 usecs (2480 samples) [ 17.830019] intel8x0: clocking to 46881 [ 18.087144] type=1400 audit(1307376315.973:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=902 comm="apparmor_parser" [ 18.106002] type=1400 audit(1307376315.993:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=904 comm="apparmor_parser" [ 18.106329] type=1400 audit(1307376315.993:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=904 comm="apparmor_parser" [ 18.106511] type=1400 audit(1307376315.993:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=904 comm="apparmor_parser" [ 18.132388] type=1400 audit(1307376316.023:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=912 comm="apparmor_parser" [ 18.132771] type=1400 audit(1307376316.023:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=912 comm="apparmor_parser" [ 18.235067] type=1400 audit(1307376316.123:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=917 comm="apparmor_parser" [ 18.257372] ppdev: user-space parallel port driver [ 18.637252] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 18.637285] pci 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16