X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
Current Operating System: Linux wei 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=/dev/sda5 loop=/ubuntu/disks/root.disk ro quiet splash
Build Date: 08 March 2011  08:22:50AM
xorg-server 2:1.7.6-2ubuntu7.6 (For technical support please see http://www.ubuntu.com/support) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 18 09:01:57 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "amdcccle Layout"
(**) |-->Screen "amdcccle-Screen[1]-0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "amdcccle-Device[1]-0"
(==) No monitor specified for screen "amdcccle-Screen[1]-0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:954f:174b:174b ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfbde0000/65536, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.5.0, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.11
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.11
(II) ATI Proprietary Linux Driver Version Identifier:8.72.11
(II) ATI Proprietary Linux Driver Release Identifier: 8.723.1                              
(II) ATI Proprietary Linux Driver Build Date: Apr  8 2010 21:40:29
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x954F) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x9608f88
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.1.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
FATAL: Module fglrx not found.
(--) fglrx(0): Chipset: "ATI Radeon HD 4300/4500 Series" (Chipset = 0x954f)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x174b)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfbde0000
(--) fglrx(0): I/O port at 0x0000c000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(EE) fglrx(0): Hasn't establisted DRM connection
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(EE) fglrx(0): Hasn't establisted DRM connection
(WW) fglrx(0): Hasn't establisted DRM connection
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x10000000)
(WW) fglrx(0): No DRM connection for driver fglrx.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) fglrx(0): Connected Display0: CRT on secondary DAC [crt2]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: BNQ  Model: 7801  Serial#: 21573
(II) fglrx(0): Year: 2009  Week: 30
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
(II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.349   greenX: 0.284 greenY: 0.617
(II) fglrx(0): blueX: 0.142 blueY: 0.067   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x864@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
(II) fglrx(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
(II) fglrx(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Serial No: P7901762026
(II) fglrx(0): Ranges: V min: 55 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: BenQ G700
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff0009d1017845540000
(II) fglrx(0): 	1e1301030e221b782edc55a359489e24
(II) fglrx(0): 	115054a56b8071008100814001010101
(II) fglrx(0): 	010101010101302a009851002a403070
(II) fglrx(0): 	1300520e1100001e000000ff00503739
(II) fglrx(0): 	30313736323032360a20000000fd0037
(II) fglrx(0): 	4c1f530e000a202020202020000000fc
(II) fglrx(0): 	0042656e5120473730300a20202000b7
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output DFP5 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 using monitor section 0-CRT2
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output DFP5 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 connected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output CRT2 using initial mode 1280x1024
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Radeon HD 4300/4500 Series has 2 configurable heads and 1 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. 
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1280) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 6911
(==) fglrx(0): Backing store disabled
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.2.1
(II) fglrx(0): GLESX enableFlags = 78
(II) fglrx(0): Acceleration enabled
(II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(II) fglrx(0): Enable composite support successfully
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): User Preference Output CRT2 using refresh rate 60.0 Hz.
(--) RandR disabled
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(II) AIGLX: Screen 0 is not DRI capable
(II) fglrx(0): Setting screen physical size to 338 x 270
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.3.2
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) XKB: reuse xkmfile /var/lib/xkb/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event4)
(**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
(**) PIXART USB OPTICAL MOUSE: always reports core events
(**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event4"
(II) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
(II) PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
(II) PIXART USB OPTICAL MOUSE: Found relative axes
(II) PIXART USB OPTICAL MOUSE: Found x and y relative axes
(II) PIXART USB OPTICAL MOUSE: Configuring as mouse
(**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
(**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE)
(II) PIXART USB OPTICAL MOUSE: initialized for relative axes.
(II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments