[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-30-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #59-Ubuntu SMP Tue Mar 1 21:30:21 UTC 2011 (Ubuntu 2.6.32-30.59-generic 2.6.32.29+drm33.13) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) [ 0.000000] BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3ff30 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 00E4000000 mask FFFC000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ff30000 (usable) [ 0.000000] modified: 000000003ff30000 - 000000003ff40000 (ACPI data) [ 0.000000] modified: 000000003ff40000 - 000000003fff0000 (ACPI NVS) [ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 3f2ac000 - 3ff1fa60 [ 0.000000] Allocated new RAMDISK: 008e6000 - 01559a60 [ 0.000000] Move RAMDISK from 000000003f2ac000 - 000000003ff1fa5f to 008e6000 - 01559a5f [ 0.000000] ACPI: RSDP 000fa950 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 3ff30000 0002C (v01 A M I OEMRSDT 01000503 MSFT 00000097) [ 0.000000] ACPI: FACP 3ff30200 00081 (v01 A M I OEMFACP 01000503 MSFT 00000097) [ 0.000000] ACPI: DSDT 3ff303e0 03944 (v01 A0023 A0023010 00000010 MSFT 0100000D) [ 0.000000] ACPI: FACS 3ff40000 00040 [ 0.000000] ACPI: APIC 3ff30390 0004A (v01 A M I OEMAPIC 01000503 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e1ed8] TEXT DATA BSS ==> [0000100000 - 00008e1ed8] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008e2000 - 00008e5160] BRK ==> [00008e2000 - 00008e5160] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e6000 - 0001559a60] NEW RAMDISK ==> [00008e6000 - 0001559a60] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ff30 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ff30 [ 0.000000] On node 0 totalpages: 261823 [ 0.000000] free_area_init_node: node 0, pgdat c079c940, node_mem_map c155b200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 271 pages used for memmap [ 0.000000] HighMem zone: 34339 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259776 [ 0.000000] Kernel command line: root=UUID=CEBCDE22BCDE053D loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5238400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff30) [ 0.000000] Memory: 1011804k/1047744k available (4689k kernel code, 35044k reserved, 2122k data, 664k init, 138440k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a7000 - 0xc084d000 ( 664 kB) [ 0.000000] .data : 0xc0594467 - 0xc07a6f08 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0594467 (4689 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1600.290 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.58 BogoMIPS (lpj=6401160) [ 0.004027] Security Framework initialized [ 0.004056] AppArmor: AppArmor initialized [ 0.004066] Mount-cache hash table entries: 512 [ 0.004203] Initializing cgroup subsys ns [ 0.004208] Initializing cgroup subsys cpuacct [ 0.004214] Initializing cgroup subsys memory [ 0.004223] Initializing cgroup subsys devices [ 0.004227] Initializing cgroup subsys freezer [ 0.004230] Initializing cgroup subsys net_cls [ 0.004252] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004256] CPU: L2 Cache: 128K (64 bytes/line) [ 0.004260] mce: CPU supports 5 MCE banks [ 0.004279] Performance Events: AMD PMU driver. [ 0.004287] ... version: 0 [ 0.004289] ... bit width: 48 [ 0.004292] ... generic registers: 4 [ 0.004294] ... value mask: 0000ffffffffffff [ 0.004297] ... max period: 00007fffffffffff [ 0.004300] ... fixed-purpose events: 0 [ 0.004302] ... event mask: 000000000000000f [ 0.004308] Checking 'hlt' instruction... OK. [ 0.020005] Disabling 4MB page tables to avoid TLB bug [ 0.020855] SMP alternatives: switching to UP code [ 0.028398] Freeing SMP alternatives: 19k freed [ 0.028425] ACPI: Core revision 20090903 [ 0.036014] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036021] ftrace: allocating 21799 entries in 43 pages [ 0.040117] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040917] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.081666] CPU0: AMD Sempron(tm) Processor 2600+ stepping 00 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (3200.58 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] devtmpfs: initialized [ 0.084001] regulator: core version 0.5 [ 0.084001] Time: 3:18:35 Date: 03/29/11 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] EISA bus registered [ 0.084001] ACPI: bus type pci registered [ 0.084001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [ 0.084001] PCI: Using configuration type 1 for base access [ 0.084001] bio: create slab at 0 [ 0.084001] ACPI: EC: Look up EC in DSDT [ 0.086212] ACPI: Executed 1 blocks of module-level executable AML code [ 0.090630] ACPI: Interpreter enabled [ 0.090635] ACPI: (supports S0 S1 S3 S4 S5) [ 0.090664] ACPI: Using IOAPIC for interrupt routing [ 0.098428] ACPI: No dock devices found. [ 0.098568] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.098633] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe4000000-0xe7ffffff] [ 0.098905] pci 0000:00:01.0: supports D1 [ 0.098940] pci 0000:00:07.0: reg 10 32bit mmio: [0xfbc00000-0xfbc007ff] [ 0.098948] pci 0000:00:07.0: reg 14 io port: [0xd800-0xd87f] [ 0.098984] pci 0000:00:07.0: supports D2 [ 0.098987] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold [ 0.098992] pci 0000:00:07.0: PME# disabled [ 0.099027] pci 0000:00:0d.0: reg 10 32bit mmio: [0xfb900000-0xfb900fff] [ 0.099063] pci 0000:00:0d.0: supports D1 D2 [ 0.099066] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot [ 0.099070] pci 0000:00:0d.0: PME# disabled [ 0.099099] pci 0000:00:0d.1: reg 10 32bit mmio: [0xfba00000-0xfba00fff] [ 0.099135] pci 0000:00:0d.1: supports D1 D2 [ 0.099138] pci 0000:00:0d.1: PME# supported from D0 D1 D2 D3hot [ 0.099142] pci 0000:00:0d.1: PME# disabled [ 0.099170] pci 0000:00:0d.2: reg 10 32bit mmio: [0xfbb00000-0xfbb000ff] [ 0.099206] pci 0000:00:0d.2: supports D1 D2 [ 0.099209] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot [ 0.099213] pci 0000:00:0d.2: PME# disabled [ 0.099250] pci 0000:00:0f.0: reg 10 io port: [0xd400-0xd407] [ 0.099257] pci 0000:00:0f.0: reg 14 io port: [0xd000-0xd003] [ 0.099264] pci 0000:00:0f.0: reg 18 io port: [0xc800-0xc807] [ 0.099271] pci 0000:00:0f.0: reg 1c io port: [0xc400-0xc403] [ 0.099278] pci 0000:00:0f.0: reg 20 io port: [0xc000-0xc00f] [ 0.099285] pci 0000:00:0f.0: reg 24 io port: [0xb800-0xb8ff] [ 0.099349] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.099422] pci 0000:00:10.0: reg 20 io port: [0xa400-0xa41f] [ 0.099446] pci 0000:00:10.0: supports D1 D2 [ 0.099448] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.099453] pci 0000:00:10.0: PME# disabled [ 0.099497] pci 0000:00:10.1: reg 20 io port: [0xa800-0xa81f] [ 0.099520] pci 0000:00:10.1: supports D1 D2 [ 0.099523] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.099528] pci 0000:00:10.1: PME# disabled [ 0.099570] pci 0000:00:10.2: reg 20 io port: [0xb000-0xb01f] [ 0.099594] pci 0000:00:10.2: supports D1 D2 [ 0.099596] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.099601] pci 0000:00:10.2: PME# disabled [ 0.099642] pci 0000:00:10.3: reg 20 io port: [0xb400-0xb41f] [ 0.099666] pci 0000:00:10.3: supports D1 D2 [ 0.099669] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.099673] pci 0000:00:10.3: PME# disabled [ 0.099701] pci 0000:00:10.4: reg 10 32bit mmio: [0xfb700000-0xfb7000ff] [ 0.099738] pci 0000:00:10.4: supports D1 D2 [ 0.099741] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.099745] pci 0000:00:10.4: PME# disabled [ 0.099803] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.099809] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices [ 0.099858] pci 0000:00:11.5: reg 10 io port: [0xa000-0xa0ff] [ 0.099898] pci 0000:00:11.5: supports D1 D2 [ 0.099928] pci 0000:00:11.6: reg 10 io port: [0x00-0xff] [ 0.100013] pci 0000:00:12.0: reg 10 io port: [0x9800-0x98ff] [ 0.100020] pci 0000:00:12.0: reg 14 32bit mmio: [0xfb600000-0xfb6000ff] [ 0.100056] pci 0000:00:12.0: supports D1 D2 [ 0.100059] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.100064] pci 0000:00:12.0: PME# disabled [ 0.100172] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.100178] pci 0000:01:00.0: reg 14 io port: [0xe000-0xe0ff] [ 0.100184] pci 0000:01:00.0: reg 18 32bit mmio: [0xfbe00000-0xfbe0ffff] [ 0.100197] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbd00000-0xfbd1ffff] [ 0.100214] pci 0000:01:00.0: supports D1 D2 [ 0.100237] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.100243] pci 0000:01:00.1: reg 14 32bit mmio: [0xfbf00000-0xfbf0ffff] [ 0.100268] pci 0000:01:00.1: supports D1 D2 [ 0.100298] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] [ 0.100303] pci 0000:00:01.0: bridge 32bit mmio: [0xfbd00000-0xfbffffff] [ 0.100308] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xfaffffff] [ 0.100316] pci_bus 0000:00: on NUMA node 0 [ 0.100323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.100585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.113435] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 0.113545] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) [ 0.113650] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 14 15) [ 0.113755] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15) [ 0.113859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.113964] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.114069] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.114174] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.114316] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.114320] vgaarb: loaded [ 0.114464] SCSI subsystem initialized [ 0.114547] libata version 3.00 loaded. [ 0.114639] usbcore: registered new interface driver usbfs [ 0.114654] usbcore: registered new interface driver hub [ 0.114683] usbcore: registered new device driver usb [ 0.114841] ACPI: WMI: Mapper loaded [ 0.114843] PCI: Using ACPI for IRQ routing [ 0.115061] NetLabel: Initializing [ 0.115064] NetLabel: domain hash size = 128 [ 0.115066] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.115082] NetLabel: unlabeled traffic allowed by default [ 0.115161] Switching to clocksource tsc [ 0.116001] AppArmor: AppArmor Filesystem Enabled [ 0.116001] pnp: PnP ACPI init [ 0.116001] ACPI: bus type pnp registered [ 0.116001] pnp 00:07: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.116001] pnp 00:07: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.117935] pnp: PnP ACPI: found 12 devices [ 0.117938] ACPI: ACPI bus type pnp unregistered [ 0.117943] PnPBIOS: Disabled by ACPI PNP [ 0.117961] system 00:07: ioport range 0x295-0x296 has been reserved [ 0.117965] system 00:07: ioport range 0x3e1-0x3e7 has been reserved [ 0.117969] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.117973] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.117976] system 00:07: ioport range 0x400-0x41f has been reserved [ 0.117985] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.117989] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.117993] system 00:08: iomem range 0xfff80000-0xffffffff has been reserved [ 0.118001] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.118005] system 00:0b: iomem range 0xc0000-0xdffff could not be reserved [ 0.118009] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.118013] system 00:0b: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.152752] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.152757] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.152762] pci 0000:00:01.0: MEM window: 0xfbd00000-0xfbffffff [ 0.152767] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xfaffffff [ 0.152798] pci 0000:00:01.0: setting latency timer to 64 [ 0.152804] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.152807] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.152811] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.152815] pci_bus 0000:01: resource 1 mem: [0xfbd00000-0xfbffffff] [ 0.152818] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xfaffffff] [ 0.152862] NET: Registered protocol family 2 [ 0.152973] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.153407] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.154611] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.155208] TCP: Hash tables configured (established 131072 bind 65536) [ 0.155213] TCP reno registered [ 0.155321] NET: Registered protocol family 1 [ 0.155338] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.155351] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.155462] pci 0000:01:00.0: Boot video device [ 0.155690] cpufreq-nforce2: No nForce2 chipset. [ 0.155726] Scanning for low memory corruption every 60 seconds [ 0.155850] audit: initializing netlink socket (disabled) [ 0.155867] type=2000 audit(1301368714.152:1): initialized [ 0.168543] Trying to unpack rootfs image as initramfs... [ 0.184896] highmem bounce pool size: 64 pages [ 0.184904] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.186893] VFS: Disk quotas dquot_6.5.2 [ 0.186972] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.187733] fuse init (API version 7.13) [ 0.187846] msgmni has been set to 1706 [ 0.193283] alg: No test for stdrng (krng) [ 0.193382] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.193386] io scheduler noop registered [ 0.193389] io scheduler anticipatory registered [ 0.193391] io scheduler deadline registered [ 0.193443] io scheduler cfq registered (default) [ 0.193589] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.193616] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.193738] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.193747] ACPI: Power Button [PWRB] [ 0.193806] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.193809] ACPI: Power Button [PWRF] [ 0.194056] processor LNXCPU:00: registered as cooling_device0 [ 0.198151] isapnp: Scanning for PnP cards... [ 0.209449] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.209558] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.209661] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.210003] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.210136] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.211409] brd: module loaded [ 0.212022] loop: module loaded [ 0.212154] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.212358] alloc irq_desc for 20 on node -1 [ 0.212361] alloc kstat_irqs on node -1 [ 0.212369] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.212426] pata_acpi 0000:00:0f.1: PCI INT A disabled [ 0.212828] Fixed MDIO Bus: probed [ 0.212871] PPP generic driver version 2.4.2 [ 0.212941] tun: Universal TUN/TAP device driver, 1.6 [ 0.212944] tun: (C) 1999-2004 Max Krasnyansky [ 0.213044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.213067] alloc irq_desc for 16 on node -1 [ 0.213070] alloc kstat_irqs on node -1 [ 0.213077] ehci_hcd 0000:00:0d.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 0.213096] ehci_hcd 0000:00:0d.2: EHCI Host Controller [ 0.213138] ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1 [ 0.256805] ehci_hcd 0000:00:0d.2: irq 16, io mem 0xfbb00000 [ 0.269016] ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI 1.00 [ 0.269172] usb usb1: configuration #1 chosen from 1 choice [ 0.269209] hub 1-0:1.0: USB hub found [ 0.269222] hub 1-0:1.0: 5 ports detected [ 0.269295] alloc irq_desc for 21 on node -1 [ 0.269298] alloc kstat_irqs on node -1 [ 0.269307] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.269327] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.269379] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2 [ 0.269453] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfb700000 [ 0.281065] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.281227] usb usb2: configuration #1 chosen from 1 choice [ 0.281264] hub 2-0:1.0: USB hub found [ 0.281277] hub 2-0:1.0: 8 ports detected [ 0.281355] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.281385] alloc irq_desc for 18 on node -1 [ 0.281388] alloc kstat_irqs on node -1 [ 0.281396] ohci_hcd 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.281416] ohci_hcd 0000:00:0d.0: OHCI Host Controller [ 0.281468] ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 3 [ 0.281515] ohci_hcd 0000:00:0d.0: irq 18, io mem 0xfb900000 [ 0.404916] usb usb3: configuration #1 chosen from 1 choice [ 0.404955] hub 3-0:1.0: USB hub found [ 0.404970] hub 3-0:1.0: 3 ports detected [ 0.405034] alloc irq_desc for 19 on node -1 [ 0.405037] alloc kstat_irqs on node -1 [ 0.405045] ohci_hcd 0000:00:0d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.405065] ohci_hcd 0000:00:0d.1: OHCI Host Controller [ 0.405124] ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 4 [ 0.405171] ohci_hcd 0000:00:0d.1: irq 19, io mem 0xfba00000 [ 0.525291] usb usb4: configuration #1 chosen from 1 choice [ 0.525337] hub 4-0:1.0: USB hub found [ 0.525351] hub 4-0:1.0: 2 ports detected [ 0.525421] uhci_hcd: USB Universal Host Controller Interface driver [ 0.525482] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.525493] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.525548] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 0.525575] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000a400 [ 0.525698] usb usb5: configuration #1 chosen from 1 choice [ 0.525732] hub 5-0:1.0: USB hub found [ 0.525742] hub 5-0:1.0: 2 ports detected [ 0.525797] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.525805] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.525845] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6 [ 0.525868] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000a800 [ 0.525985] usb usb6: configuration #1 chosen from 1 choice [ 0.526022] hub 6-0:1.0: USB hub found [ 0.526032] hub 6-0:1.0: 2 ports detected [ 0.526084] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.526091] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.526132] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7 [ 0.526154] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b000 [ 0.526269] usb usb7: configuration #1 chosen from 1 choice [ 0.526307] hub 7-0:1.0: USB hub found [ 0.526316] hub 7-0:1.0: 2 ports detected [ 0.526367] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.526375] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.526419] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 8 [ 0.526442] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b400 [ 0.526561] usb usb8: configuration #1 chosen from 1 choice [ 0.526595] hub 8-0:1.0: USB hub found [ 0.526606] hub 8-0:1.0: 2 ports detected [ 0.526710] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.526714] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.526912] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.527067] mice: PS/2 mouse device common for all mice [ 0.527221] rtc_cmos 00:02: RTC can wake from S4 [ 0.527274] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.527329] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.527480] device-mapper: uevent: version 1.0.3 [ 0.530836] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.530931] device-mapper: multipath: version 1.1.0 loaded [ 0.530934] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.531084] EISA: Probing bus 0 at eisa.0 [ 0.531093] Cannot allocate resource for EISA slot 1 [ 0.531124] EISA: Detected 0 cards. [ 0.536950] cpuidle: using governor ladder [ 0.536955] cpuidle: using governor menu [ 0.537481] TCP cubic registered [ 0.537684] NET: Registered protocol family 10 [ 0.538224] lo: Disabled Privacy Extensions [ 0.538669] NET: Registered protocol family 17 [ 0.538711] powernow-k8: Power state transitions not supported [ 0.538736] Using IPI No-Shortcut mode [ 0.538851] PM: Resume from disk failed. [ 0.538864] registered taskstats version 1 [ 0.539241] Magic number: 3:746:311 [ 0.539345] rtc_cmos 00:02: setting system clock to 2011-03-29 03:18:35 UTC (1301368715) [ 0.539349] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.539352] EDD information not available. [ 0.593850] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.932629] isapnp: No Plug & Play device found [ 0.932652] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 1.046348] Freeing initrd memory: 12750k freed [ 1.059954] Freeing unused kernel memory: 664k freed [ 1.060801] Write protecting the kernel text: 4692k [ 1.060840] Write protecting the kernel read-only data: 1844k [ 1.095213] ramzswap: disk size set to 512840 kB [ 1.105380] udev: starting version 151 [ 1.113868] usb 6-1: configuration #1 chosen from 1 choice [ 1.194236] Adding 512836k swap on /dev/ramzswap0. Priority:100 extents:1 across:512836k SS [ 1.356082] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 1.403797] usbcore: registered new interface driver hiddev [ 1.419100] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb6/6-1/6-1:1.0/input/input4 [ 1.419235] generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:10.1-1/input0 [ 1.419267] usbcore: registered new interface driver usbhid [ 1.419271] usbhid: v2.6:USB HID core driver [ 1.457067] sata_via 0000:00:0f.0: version 2.4 [ 1.457091] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.457137] sata_via 0000:00:0f.0: routed to hard irq line 10 [ 1.463353] Linux agpgart interface v0.103 [ 1.468922] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.468961] scsi0 : sata_via [ 1.474149] scsi1 : sata_via [ 1.476146] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd000 bmdma 0xc000 irq 20 [ 1.476152] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xc008 irq 20 [ 1.476205] pata_via 0000:00:0f.1: version 0.3.4 [ 1.476221] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.478139] scsi2 : pata_via [ 1.479674] scsi3 : pata_via [ 1.481942] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.481947] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.482154] alloc irq_desc for 23 on node -1 [ 1.482157] alloc kstat_irqs on node -1 [ 1.482166] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.482994] eth0: VIA Rhine II at 0xfb600000, 00:13:d4:70:19:aa, IRQ 23. [ 1.483704] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1. [ 1.483837] ohci1394 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.530023] usb 7-1: configuration #1 chosen from 1 choice [ 1.543761] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fbc00000-fbc007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.549101] Initializing USB Mass Storage driver... [ 1.549311] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204] [ 1.582972] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xe4000000 [ 1.583161] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.583373] usbcore: registered new interface driver usb-storage [ 1.583378] USB Mass Storage support registered. [ 1.583515] usb-storage: device found at 2 [ 1.583517] usb-storage: waiting for device to settle before scanning [ 1.584108] [drm] Initialized drm 1.1.0 20060810 [ 1.680014] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.697347] ata3.00: ATA-7: ST3160815A, 3.AAC, max UDMA/100 [ 1.697352] ata3.00: 312581808 sectors, multi 16: LBA48 [ 1.763933] ata3.00: configured for UDMA/100 [ 1.892012] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.902828] scsi 2:0:0:0: Direct-Access ATA ST3160815A 3.AA PQ: 0 ANSI: 5 [ 1.903024] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.903481] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.903536] sd 2:0:0:0: [sda] Write Protect is off [ 1.903540] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.903567] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.903739] sda: sda1 sda2 < sda5 sda6 > [ 1.940750] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.064456] ata4.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66 [ 2.080303] ata4.00: configured for UDMA/66 [ 2.082306] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI: 5 [ 2.085987] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.085993] Uniform CD-ROM driver Revision: 3.20 [ 2.086142] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.086228] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.155205] [drm] radeon defaulting to kernel modesetting. [ 2.155211] [drm] radeon kernel modesetting enabled. [ 2.155482] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.158745] [drm] radeon: Initializing kernel modesetting. [ 2.158925] [drm] register mmio base: 0xFBE00000 [ 2.158929] [drm] register mmio size: 65536 [ 2.160227] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 2.160356] [drm] Generation 2 PCI interface, using max accessible memory [ 2.160368] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 2.160387] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 2.160473] radeon 0000:01:00.0: putting AGP V3 device into 8x mode [ 2.160481] [drm] radeon: VRAM 128M [ 2.160484] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 2.160487] [drm] radeon: GTT 64M [ 2.160490] [drm] radeon: GTT from 0xE4000000 to 0xE7FFFFFF [ 2.160510] [drm] radeon: irq initialized. [ 2.160712] [drm] Detected VRAM RAM=128M, BAR=128M [ 2.160717] [drm] RAM width 64bits DDR [ 2.160803] [TTM] Zone kernel: Available graphics memory: 443622 kiB. [ 2.160806] [TTM] Zone highmem: Available graphics memory: 512842 kiB. [ 2.160827] [drm] radeon: 128M of VRAM memory ready [ 2.160830] [drm] radeon: 64M of GTT memory ready. [ 2.161177] [drm] radeon: cp idle (0x02000603) [ 2.161221] [drm] Loading R200 Microcode [ 2.161645] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 2.171841] [drm] radeon: ring at 0x00000000E4000000 [ 2.171862] [drm] ring test succeeded in 1 usecs [ 2.177962] [drm] radeon: ib pool ready. [ 2.178055] [drm] ib test succeeded in 0 usecs [ 2.178435] [drm] Default TV standard: NTSC [ 2.178439] [drm] 27.000000000 MHz TV ref clk [ 2.178443] [drm] Default TV standard: NTSC [ 2.178445] [drm] 27.000000000 MHz TV ref clk [ 2.178507] [drm] Radeon Display Connectors [ 2.178510] [drm] Connector 0: [ 2.178512] [drm] VGA [ 2.178515] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 2.178517] [drm] Encoders: [ 2.178519] [drm] CRT1: INTERNAL_DAC1 [ 2.178521] [drm] Connector 1: [ 2.178523] [drm] S-video [ 2.178525] [drm] Encoders: [ 2.178527] [drm] TV1: INTERNAL_DAC2 [ 2.425426] [drm] fb mappable at 0xE8040000 [ 2.425431] [drm] vram apper at 0xE8000000 [ 2.425433] [drm] size 8294400 [ 2.425435] [drm] fb depth is 24 [ 2.425437] [drm] pitch is 7680 [ 2.426193] fb0: radeondrmfb frame buffer device [ 2.426198] registered panic notifier [ 2.426206] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 2.429664] vga16fb: initializing [ 2.429672] vga16fb: mapped to 0xc00a0000 [ 2.429678] vga16fb: not registering due to another framebuffer present [ 2.620065] Console: switching to colour frame buffer device 240x67 [ 2.948143] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000238ca7] [ 3.882104] kjournald starting. Commit interval 5 seconds [ 3.882126] EXT3-fs: mounted filesystem with ordered data mode. [ 6.581347] usb-storage: device scan complete [ 6.584416] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 6.587367] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 6.591253] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 6.594330] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 6.594892] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 6.595046] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 6.595188] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 6.595338] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 6.773268] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 6.778261] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 6.783239] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 6.788242] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 7.771790] EXT3 FS on loop0, internal journal [ 8.717988] udev: starting version 151 [ 12.173524] parport_pc 00:06: reported by Plug and Play ACPI [ 12.173641] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 12.381347] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.467698] lp0: using parport0 (interrupt-driven). [ 12.475463] ppdev: user-space parallel port driver [ 13.340530] type=1505 audit(1301361528.300:2): operation="profile_load" pid=591 name="/sbin/dhclient3" [ 13.340911] type=1505 audit(1301361528.300:3): operation="profile_load" pid=591 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.341127] type=1505 audit(1301361528.300:4): operation="profile_load" pid=591 name="/usr/lib/connman/scripts/dhclient-script" [ 13.341600] type=1505 audit(1301361528.300:5): operation="profile_replace" pid=593 name="/sbin/dhclient3" [ 13.341994] type=1505 audit(1301361528.300:6): operation="profile_replace" pid=593 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.342215] type=1505 audit(1301361528.300:7): operation="profile_replace" pid=593 name="/usr/lib/connman/scripts/dhclient-script" [ 15.718715] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) [ 15.718726] alloc irq_desc for 22 on node -1 [ 15.718729] alloc kstat_irqs on node -1 [ 15.718737] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 16.468019] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 16.972239] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled [ 16.972258] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [ 16.972504] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 16.972658] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 17.280763] type=1505 audit(1301361532.240:8): operation="profile_load" pid=871 name="/usr/share/gdm/guest-session/Xsession" [ 17.285629] type=1505 audit(1301361532.244:9): operation="profile_replace" pid=872 name="/sbin/dhclient3" [ 17.286023] type=1505 audit(1301361532.244:10): operation="profile_replace" pid=872 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.286246] type=1505 audit(1301361532.244:11): operation="profile_replace" pid=872 name="/usr/lib/connman/scripts/dhclient-script" [ 18.511264] __ratelimit: 9 callbacks suppressed [ 18.511269] type=1505 audit(1301361533.468:15): operation="profile_load" pid=891 name="/usr/lib/cups/backend/cups-pdf" [ 18.511827] type=1505 audit(1301361533.468:16): operation="profile_load" pid=891 name="/usr/sbin/cupsd" [ 18.699580] type=1505 audit(1301361533.656:17): operation="profile_load" pid=892 name="/usr/sbin/mysqld" [ 18.796389] type=1505 audit(1301361533.756:18): operation="profile_load" pid=893 name="/usr/sbin/mysqld-akonadi" [ 18.910018] type=1505 audit(1301361533.868:19): operation="profile_load" pid=894 name="/usr/sbin/tcpdump" [ 20.642669] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 20.642674] apm: overridden by ACPI. [ 22.916388] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 23.457918] type=1505 audit(1301361538.416:20): operation="profile_replace" pid=1084 name="/usr/sbin/mysqld" [ 32.936007] eth0: no IPv6 routers present [ 57.345934] RPC: Registered udp transport module. [ 57.345939] RPC: Registered tcp transport module. [ 57.345942] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 57.427302] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 57.624614] svc: failed to register lockdv1 RPC service (errno 97). [ 57.626154] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 57.637246] NFSD: starting 90-second grace period [ 147.291928] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 147.291935] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 147.291937] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 147.291939] vboxdrv: the usage of hardware performance counters by [ 147.291941] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 147.291946] vboxdrv: Found 1 processor cores. [ 147.295627] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 147.295632] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001). [ 6306.195197] type=1505 audit(1301367822.259:21): operation="profile_replace" pid=11677 name="/usr/share/gdm/guest-session/Xsession" [ 6306.462744] type=1505 audit(1301367822.527:22): operation="profile_replace" pid=11678 name="/sbin/dhclient3" [ 6306.462972] type=1505 audit(1301367822.527:23): operation="profile_replace" pid=11678 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 6306.463118] type=1505 audit(1301367822.527:24): operation="profile_replace" pid=11678 name="/usr/lib/connman/scripts/dhclient-script" [ 6314.861021] type=1505 audit(1301367830.927:25): operation="profile_replace" pid=11681 name="/usr/bin/evince" [ 6314.863417] type=1505 audit(1301367830.927:26): operation="profile_replace" pid=11681 name="/usr/bin/evince-previewer" [ 6314.865673] type=1505 audit(1301367830.931:27): operation="profile_replace" pid=11681 name="/usr/bin/evince-thumbnailer" [ 6315.327644] type=1505 audit(1301367831.391:28): operation="profile_replace" pid=11693 name="/usr/lib/cups/backend/cups-pdf" [ 6315.328067] type=1505 audit(1301367831.395:29): operation="profile_replace" pid=11693 name="/usr/sbin/cupsd" [ 6315.473031] type=1505 audit(1301367831.539:30): operation="profile_replace" pid=11694 name="/usr/sbin/mysqld" [ 6315.612351] type=1505 audit(1301367831.679:31): operation="profile_replace" pid=11695 name="/usr/sbin/tcpdump" [ 6315.719834] type=1505 audit(1301367831.783:32): operation="profile_remove" pid=11718 name="/usr/sbin/mysqld-akonadi" namespace="root"