}
[  134.220577] ata1.00: error: { ABRT }
[  134.236371] ata1.00: configured for UDMA/133
[  134.236378] ata1: EH complete
[  134.236532] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.236534] ata1.00: BMDMA stat 0x25
[  134.236537] ata1.00: failed command: READ DMA
[  134.236543] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.236544]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.236546] ata1.00: status: { DRDY ERR }
[  134.236549] ata1.00: error: { ABRT }
[  134.252368] ata1.00: configured for UDMA/133
[  134.252373] ata1: EH complete
[  134.252527] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.252529] ata1.00: BMDMA stat 0x25
[  134.252532] ata1.00: failed command: READ DMA
[  134.252537] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.252539]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.252541] ata1.00: status: { DRDY ERR }
[  134.252543] ata1.00: error: { ABRT }
[  134.268361] ata1.00: configured for UDMA/133
[  134.268367] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  134.268370] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  134.268374] Descriptor sense data with sense descriptors (in hex):
[  134.268376]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  134.268384]         00 00 00 08 
[  134.268388] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  134.268392] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 08 00 00 08 00
[  134.268400] end_request: I/O error, dev sda, sector 8
[  134.268407] ata1: EH complete
[  134.268586] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.268589] ata1.00: BMDMA stat 0x25
[  134.268591] ata1.00: failed command: READ DMA
[  134.268597] ata1.00: cmd c8/00:08:80:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.268598]          res 51/04:08:80:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.268601] ata1.00: status: { DRDY ERR }
[  134.268603] ata1.00: error: { ABRT }
[  134.284393] ata1.00: configured for UDMA/133
[  134.284400] ata1: EH complete
[  134.284561] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.284563] ata1.00: BMDMA stat 0x25
[  134.284566] ata1.00: failed command: READ DMA
[  134.284571] ata1.00: cmd c8/00:08:80:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.284573]          res 51/04:08:80:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.284575] ata1.00: status: { DRDY ERR }
[  134.284578] ata1.00: error: { ABRT }
[  134.300395] ata1.00: configured for UDMA/133
[  134.300401] ata1: EH complete
[  134.300563] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.300566] ata1.00: BMDMA stat 0x25
[  134.300569] ata1.00: failed command: READ DMA
[  134.300574] ata1.00: cmd c8/00:08:80:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.300576]          res 51/04:08:80:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.300578] ata1.00: status: { DRDY ERR }
[  134.300580] ata1.00: error: { ABRT }
[  134.316413] ata1.00: configured for UDMA/133
[  134.316420] ata1: EH complete
[  134.316579] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.316582] ata1.00: BMDMA stat 0x25
[  134.316584] ata1.00: failed command: READ DMA
[  134.316590] ata1.00: cmd c8/00:08:80:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.316591]          res 51/04:08:80:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.316594] ata1.00: status: { DRDY ERR }
[  134.316596] ata1.00: error: { ABRT }
[  134.332367] ata1.00: configured for UDMA/133
[  134.332374] ata1: EH complete
[  134.332529] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.332531] ata1.00: BMDMA stat 0x25
[  134.332534] ata1.00: failed command: READ DMA
[  134.332539] ata1.00: cmd c8/00:08:80:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.332541]          res 51/04:08:80:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.332543] ata1.00: status: { DRDY ERR }
[  134.332545] ata1.00: error: { ABRT }
[  134.348362] ata1.00: configured for UDMA/133
[  134.348367] ata1: EH complete
[  134.348513] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.348516] ata1.00: BMDMA stat 0x25
[  134.348518] ata1.00: failed command: READ DMA
[  134.348524] ata1.00: cmd c8/00:08:80:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.348525]          res 51/04:08:80:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.348528] ata1.00: status: { DRDY ERR }
[  134.348530] ata1.00: error: { ABRT }
[  134.364391] ata1.00: configured for UDMA/133
[  134.364399] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  134.364402] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  134.364406] Descriptor sense data with sense descriptors (in hex):
[  134.364407]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  134.364416]         00 00 00 80 
[  134.364420] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  134.364424] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 80 00 00 08 00
[  134.364432] end_request: I/O error, dev sda, sector 128
[  134.364441] ata1: EH complete
[  134.364631] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.364634] ata1.00: BMDMA stat 0x25
[  134.364637] ata1.00: failed command: READ DMA
[  134.364642] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.364643]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.364646] ata1.00: status: { DRDY ERR }
[  134.364648] ata1.00: error: { ABRT }
[  134.380392] ata1.00: configured for UDMA/133
[  134.380399] ata1: EH complete
[  134.380564] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.380567] ata1.00: BMDMA stat 0x25
[  134.380569] ata1.00: failed command: READ DMA
[  134.380575] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.380576]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.380579] ata1.00: status: { DRDY ERR }
[  134.380581] ata1.00: error: { ABRT }
[  134.396373] ata1.00: configured for UDMA/133
[  134.396379] ata1: EH complete
[  134.396533] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.396535] ata1.00: BMDMA stat 0x25
[  134.396538] ata1.00: failed command: READ DMA
[  134.396544] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.396545]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.396548] ata1.00: status: { DRDY ERR }
[  134.396550] ata1.00: error: { ABRT }
[  134.412370] ata1.00: configured for UDMA/133
[  134.412376] ata1: EH complete
[  134.412529] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.412531] ata1.00: BMDMA stat 0x25
[  134.412534] ata1.00: failed command: READ DMA
[  134.412540] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.412541]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.412544] ata1.00: status: { DRDY ERR }
[  134.412546] ata1.00: error: { ABRT }
[  134.428366] ata1.00: configured for UDMA/133
[  134.428373] ata1: EH complete
[  134.428520] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.428523] ata1.00: BMDMA stat 0x25
[  134.428525] ata1.00: failed command: READ DMA
[  134.428531] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.428532]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.428535] ata1.00: status: { DRDY ERR }
[  134.428537] ata1.00: error: { ABRT }
[  134.444392] ata1.00: configured for UDMA/133
[  134.444398] ata1: EH complete
[  134.444557] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.444559] ata1.00: BMDMA stat 0x25
[  134.444562] ata1.00: failed command: READ DMA
[  134.444568] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.444569]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.444572] ata1.00: status: { DRDY ERR }
[  134.444574] ata1.00: error: { ABRT }
[  134.460393] ata1.00: configured for UDMA/133
[  134.460401] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  134.460404] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  134.460408] Descriptor sense data with sense descriptors (in hex):
[  134.460410]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  134.460418]         00 00 00 00 
[  134.460422] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  134.460426] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  134.460434] end_request: I/O error, dev sda, sector 0
[  134.460441] ata1: EH complete
[  134.460634] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.460636] ata1.00: BMDMA stat 0x25
[  134.460639] ata1.00: failed command: READ DMA
[  134.460645] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.460646]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.460649] ata1.00: status: { DRDY ERR }
[  134.460651] ata1.00: error: { ABRT }
[  134.484394] ata1.00: configured for UDMA/133
[  134.484401] ata1: EH complete
[  134.484565] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.484567] ata1.00: BMDMA stat 0x25
[  134.484570] ata1.00: failed command: READ DMA
[  134.484575] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.484577]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.484579] ata1.00: status: { DRDY ERR }
[  134.484582] ata1.00: error: { ABRT }
[  134.500393] ata1.00: configured for UDMA/133
[  134.500399] ata1: EH complete
[  134.500566] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.500569] ata1.00: BMDMA stat 0x25
[  134.500571] ata1.00: failed command: READ DMA
[  134.500577] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.500578]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.500581] ata1.00: status: { DRDY ERR }
[  134.500583] ata1.00: error: { ABRT }
[  134.516398] ata1.00: configured for UDMA/133
[  134.516404] ata1: EH complete
[  134.516566] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.516569] ata1.00: BMDMA stat 0x25
[  134.516571] ata1.00: failed command: READ DMA
[  134.516577] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.516578]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.516581] ata1.00: status: { DRDY ERR }
[  134.516583] ata1.00: error: { ABRT }
[  134.532368] ata1.00: configured for UDMA/133
[  134.532375] ata1: EH complete
[  134.532530] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.532533] ata1.00: BMDMA stat 0x25
[  134.532536] ata1.00: failed command: READ DMA
[  134.532541] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.532542]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.532545] ata1.00: status: { DRDY ERR }
[  134.532547] ata1.00: error: { ABRT }
[  134.548362] ata1.00: configured for UDMA/133
[  134.548367] ata1: EH complete
[  134.548514] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.548517] ata1.00: BMDMA stat 0x25
[  134.548519] ata1.00: failed command: READ DMA
[  134.548525] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.548526]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.548529] ata1.00: status: { DRDY ERR }
[  134.548531] ata1.00: error: { ABRT }
[  134.564393] ata1.00: configured for UDMA/133
[  134.564401] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  134.564404] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  134.564408] Descriptor sense data with sense descriptors (in hex):
[  134.564409]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  134.564418]         00 00 00 00 
[  134.564422] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  134.564426] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  134.564433] end_request: I/O error, dev sda, sector 0
[  134.564443] ata1: EH complete
[  134.564638] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.564640] ata1.00: BMDMA stat 0x25
[  134.564643] ata1.00: failed command: READ DMA
[  134.564649] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.564650]          res 51/04:08:00:10:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.564653] ata1.00: status: { DRDY ERR }
[  134.564655] ata1.00: error: { ABRT }
[  134.580397] ata1.00: configured for UDMA/133
[  134.580404] ata1: EH complete
[  134.580568] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.580570] ata1.00: BMDMA stat 0x25
[  134.580573] ata1.00: failed command: READ DMA
[  134.580579] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.580580]          res 51/04:08:00:10:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.580583] ata1.00: status: { DRDY ERR }
[  134.580585] ata1.00: error: { ABRT }
[  134.596395] ata1.00: configured for UDMA/133
[  134.596401] ata1: EH complete
[  134.596560] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.596562] ata1.00: BMDMA stat 0x25
[  134.596565] ata1.00: failed command: READ DMA
[  134.596571] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.596572]          res 51/04:08:00:10:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.596575] ata1.00: status: { DRDY ERR }
[  134.596577] ata1.00: error: { ABRT }
[  134.612365] ata1.00: configured for UDMA/133
[  134.612371] ata1: EH complete
[  134.612524] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.612527] ata1.00: BMDMA stat 0x25
[  134.612529] ata1.00: failed command: READ DMA
[  134.612535] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.612536]          res 51/04:08:00:10:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.612539] ata1.00: status: { DRDY ERR }
[  134.612541] ata1.00: error: { ABRT }
[  134.628360] ata1.00: configured for UDMA/133
[  134.628366] ata1: EH complete
[  134.628513] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.628516] ata1.00: BMDMA stat 0x25
[  134.628518] ata1.00: failed command: READ DMA
[  134.628524] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.628525]          res 51/04:08:00:10:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.628528] ata1.00: status: { DRDY ERR }
[  134.628530] ata1.00: error: { ABRT }
[  134.644393] ata1.00: configured for UDMA/133
[  134.644399] ata1: EH complete
[  134.644558] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  134.644560] ata1.00: BMDMA stat 0x25
[  134.644563] ata1.00: failed command: READ DMA
[  134.644569] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  134.644570]          res 51/04:08:00:10:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  134.644572] ata1.00: status: { DRDY ERR }
[  134.644575] ata1.00: error: { ABRT }
[  134.660395] ata1.00: configured for UDMA/133
[  134.660402] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  134.660406] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  134.660409] Descriptor sense data with sense descriptors (in hex):
[  134.660411]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  134.660420]         00 00 10 00 
[  134.660423] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  134.660428] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 10 00 00 00 08 00
[  134.660435] end_request: I/O error, dev sda, sector 4096
[  134.660443] ata1: EH complete
[  138.760549] udev[2624]: starting version 163
[  139.264086] jmb38x_ms 0000:08:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  139.264096] jmb38x_ms 0000:08:00.3: setting latency timer to 64
[  139.524061] Bluetooth: Core ver 2.15
[  139.524112] NET: Registered protocol family 31
[  139.524114] Bluetooth: HCI device and connection manager initialized
[  139.524117] Bluetooth: HCI socket layer initialized
[  139.524972] Linux video capture interface: v2.00
[  139.637493] Bluetooth: Generic Bluetooth USB driver ver 0.6
[  139.651896] cfg80211: Calling CRDA to update world regulatory domain
[  139.664043] usbcore: registered new interface driver btusb
[  139.665772] uvcvideo: Found UVC 1.00 device FM13FF-82 (05c8:0118)
[  139.668559] acer-wmi: Acer Laptop ACPI-WMI Extras
[  139.693904] input: FM13FF-82 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input8
[  139.694306] usbcore: registered new interface driver uvcvideo
[  139.694309] USB Video Class driver (v0.1.0)
[  139.721567] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.721572] ata1.00: BMDMA stat 0x25
[  139.721575] ata1.00: failed command: READ DMA
[  139.721581] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.721583]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.721585] ata1.00: status: { DRDY ERR }
[  139.721588] ata1.00: error: { ABRT }
[  139.740576] ata1.00: configured for UDMA/133
[  139.740594] ata1: EH complete
[  139.741111] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.741115] ata1.00: BMDMA stat 0x25
[  139.741118] ata1.00: failed command: READ DMA
[  139.741124] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.741125]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.741128] ata1.00: status: { DRDY ERR }
[  139.741130] ata1.00: error: { ABRT }
[  139.756500] ata1.00: configured for UDMA/133
[  139.756517] ata1: EH complete
[  139.756674] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.756677] ata1.00: BMDMA stat 0x25
[  139.756681] ata1.00: failed command: READ DMA
[  139.756687] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.756688]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.756691] ata1.00: status: { DRDY ERR }
[  139.756703] ata1.00: error: { ABRT }
[  139.772414] ata1.00: configured for UDMA/133
[  139.772428] ata1: EH complete
[  139.772613] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.772617] ata1.00: BMDMA stat 0x25
[  139.772620] ata1.00: failed command: READ DMA
[  139.772626] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.772628]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.772631] ata1.00: status: { DRDY ERR }
[  139.772633] ata1.00: error: { ABRT }
[  139.788619] ata1.00: configured for UDMA/133
[  139.788631] ata1: EH complete
[  139.788785] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.788789] ata1.00: BMDMA stat 0x25
[  139.788793] ata1.00: failed command: READ DMA
[  139.788799] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.788800]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.788803] ata1.00: status: { DRDY ERR }
[  139.788805] ata1.00: error: { ABRT }
[  139.804384] ata1.00: configured for UDMA/133
[  139.804400] ata1: EH complete
[  139.804552] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.804555] ata1.00: BMDMA stat 0x25
[  139.804558] ata1.00: failed command: READ DMA
[  139.804565] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.804566]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.804569] ata1.00: status: { DRDY ERR }
[  139.804571] ata1.00: error: { ABRT }
[  139.820578] ata1.00: configured for UDMA/133
[  139.820596] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  139.820599] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  139.820604] Descriptor sense data with sense descriptors (in hex):
[  139.820606]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  139.820614]         00 00 00 00 
[  139.820617] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  139.820621] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  139.820629] end_request: I/O error, dev sda, sector 0
[  139.820633] quiet_error: 16 callbacks suppressed
[  139.820636] Buffer I/O error on device sda, logical block 0
[  139.820654] ata1: EH complete
[  139.821231] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.821234] ata1.00: BMDMA stat 0x25
[  139.821238] ata1.00: failed command: READ DMA
[  139.821244] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.821245]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.821248] ata1.00: status: { DRDY ERR }
[  139.821250] ata1.00: error: { ABRT }
[  139.836487] ata1.00: configured for UDMA/133
[  139.836504] ata1: EH complete
[  139.836661] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.836665] ata1.00: BMDMA stat 0x25
[  139.836668] ata1.00: failed command: READ DMA
[  139.836674] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.836676]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.836679] ata1.00: status: { DRDY ERR }
[  139.836681] ata1.00: error: { ABRT }
[  139.852762] ata1.00: configured for UDMA/133
[  139.852779] ata1: EH complete
[  139.852977] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.852981] ata1.00: BMDMA stat 0x25
[  139.852985] ata1.00: failed command: READ DMA
[  139.852991] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.852992]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.852995] ata1.00: status: { DRDY ERR }
[  139.852997] ata1.00: error: { ABRT }
[  139.868373] ata1.00: configured for UDMA/133
[  139.868389] ata1: EH complete
[  139.868538] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.868541] ata1.00: BMDMA stat 0x25
[  139.868545] ata1.00: failed command: READ DMA
[  139.868551] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.868552]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.868555] ata1.00: status: { DRDY ERR }
[  139.868557] ata1.00: error: { ABRT }
[  139.885235] ata1.00: configured for UDMA/133
[  139.885249] ata1: EH complete
[  139.885417] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.885421] ata1.00: BMDMA stat 0x25
[  139.885424] ata1.00: failed command: READ DMA
[  139.885430] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.885431]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.885434] ata1.00: status: { DRDY ERR }
[  139.885436] ata1.00: error: { ABRT }
[  139.904075] ata1.00: configured for UDMA/133
[  139.904096] ata1: EH complete
[  139.906278] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.906282] ata1.00: BMDMA stat 0x25
[  139.906286] ata1.00: failed command: READ DMA
[  139.906292] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.906293]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.906296] ata1.00: status: { DRDY ERR }
[  139.906298] ata1.00: error: { ABRT }
[  139.920609] ata1.00: configured for UDMA/133
[  139.920628] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  139.920632] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  139.920636] Descriptor sense data with sense descriptors (in hex):
[  139.920638]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  139.920646]         00 00 00 00 
[  139.920649] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  139.920654] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  139.920662] end_request: I/O error, dev sda, sector 0
[  139.920666] Buffer I/O error on device sda, logical block 0
[  139.920684] ata1: EH complete
[  139.920973] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.920976] ata1.00: BMDMA stat 0x25
[  139.920979] ata1.00: failed command: READ DMA
[  139.920985] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.920986]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.920989] ata1.00: status: { DRDY ERR }
[  139.920991] ata1.00: error: { ABRT }
[  139.936392] ata1.00: configured for UDMA/133
[  139.936410] ata1: EH complete
[  139.936587] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.936591] ata1.00: BMDMA stat 0x25
[  139.936594] ata1.00: failed command: READ DMA
[  139.936601] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.936602]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.936605] ata1.00: status: { DRDY ERR }
[  139.936607] ata1.00: error: { ABRT }
[  139.952366] ata1.00: configured for UDMA/133
[  139.952385] ata1: EH complete
[  139.952539] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.952543] ata1.00: BMDMA stat 0x25
[  139.952546] ata1.00: failed command: READ DMA
[  139.952552] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.952553]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.952556] ata1.00: status: { DRDY ERR }
[  139.952558] ata1.00: error: { ABRT }
[  139.968476] ata1.00: configured for UDMA/133
[  139.968494] ata1: EH complete
[  139.968675] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.968678] ata1.00: BMDMA stat 0x25
[  139.968682] ata1.00: failed command: READ DMA
[  139.968688] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.968689]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.968692] ata1.00: status: { DRDY ERR }
[  139.968694] ata1.00: error: { ABRT }
[  139.984419] ata1.00: configured for UDMA/133
[  139.984436] ata1: EH complete
[  139.984591] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  139.984595] ata1.00: BMDMA stat 0x25
[  139.984599] ata1.00: failed command: READ DMA
[  139.984604] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  139.984606]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  139.984608] ata1.00: status: { DRDY ERR }
[  139.984611] ata1.00: error: { ABRT }
[  140.000444] ata1.00: configured for UDMA/133
[  140.000462] ata1: EH complete
[  140.000613] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.000616] ata1.00: BMDMA stat 0x25
[  140.000620] ata1.00: failed command: READ DMA
[  140.000626] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.000627]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.000630] ata1.00: status: { DRDY ERR }
[  140.000632] ata1.00: error: { ABRT }
[  140.020395] ata1.00: configured for UDMA/133
[  140.020413] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  140.020416] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  140.020420] Descriptor sense data with sense descriptors (in hex):
[  140.020422]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  140.020430]         00 00 00 00 
[  140.020434] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  140.020438] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  140.020446] end_request: I/O error, dev sda, sector 0
[  140.020450] Buffer I/O error on device sda, logical block 0
[  140.020468] ata1: EH complete
[  140.020855] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.020858] ata1.00: BMDMA stat 0x25
[  140.020861] ata1.00: failed command: READ DMA
[  140.020867] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.020868]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.020871] ata1.00: status: { DRDY ERR }
[  140.020873] ata1.00: error: { ABRT }
[  140.036674] ata1.00: configured for UDMA/133
[  140.036691] ata1: EH complete
[  140.036870] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.036874] ata1.00: BMDMA stat 0x25
[  140.036877] ata1.00: failed command: READ DMA
[  140.036883] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.036884]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.036887] ata1.00: status: { DRDY ERR }
[  140.036889] ata1.00: error: { ABRT }
[  140.052401] ata1.00: configured for UDMA/133
[  140.052413] ata1: EH complete
[  140.052570] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.052573] ata1.00: BMDMA stat 0x25
[  140.052577] ata1.00: failed command: READ DMA
[  140.052583] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.052584]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.052587] ata1.00: status: { DRDY ERR }
[  140.052589] ata1.00: error: { ABRT }
[  140.070034] ata1.00: configured for UDMA/133
[  140.070050] ata1: EH complete
[  140.070235] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.070239] ata1.00: BMDMA stat 0x25
[  140.070242] ata1.00: failed command: READ DMA
[  140.070248] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.070250]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.070252] ata1.00: status: { DRDY ERR }
[  140.070254] ata1.00: error: { ABRT }
[  140.072958] Bluetooth: L2CAP ver 2.14
[  140.072962] Bluetooth: L2CAP socket layer initialized
[  140.085345] ata1.00: configured for UDMA/133
[  140.085359] ata1: EH complete
[  140.085509] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.085512] ata1.00: BMDMA stat 0x25
[  140.085516] ata1.00: failed command: READ DMA
[  140.085522] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.085523]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.085526] ata1.00: status: { DRDY ERR }
[  140.085528] ata1.00: error: { ABRT }
[  140.104149] ata1.00: configured for UDMA/133
[  140.104164] ata1: EH complete
[  140.104390] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.104394] ata1.00: BMDMA stat 0x25
[  140.104397] ata1.00: failed command: READ DMA
[  140.104403] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.104405]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.104407] ata1.00: status: { DRDY ERR }
[  140.104409] ata1.00: error: { ABRT }
[  140.120852] ata1.00: configured for UDMA/133
[  140.120870] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  140.120873] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  140.120877] Descriptor sense data with sense descriptors (in hex):
[  140.120879]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  140.120887]         00 00 00 00 
[  140.120891] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  140.120895] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  140.120903] end_request: I/O error, dev sda, sector 0
[  140.120908] Buffer I/O error on device sda, logical block 0
[  140.120924] ata1: EH complete
[  140.121123] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.121126] ata1.00: BMDMA stat 0x25
[  140.121129] ata1.00: failed command: READ DMA
[  140.121135] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.121136]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.121139] ata1.00: status: { DRDY ERR }
[  140.121141] ata1.00: error: { ABRT }
[  140.136578] ata1.00: configured for UDMA/133
[  140.136596] ata1: EH complete
[  140.136758] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.136761] ata1.00: BMDMA stat 0x25
[  140.136765] ata1.00: failed command: READ DMA
[  140.136771] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.136772]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.136775] ata1.00: status: { DRDY ERR }
[  140.136777] ata1.00: error: { ABRT }
[  140.152357] ata1.00: configured for UDMA/133
[  140.152368] ata1: EH complete
[  140.152533] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.152536] ata1.00: BMDMA stat 0x25
[  140.152540] ata1.00: failed command: READ DMA
[  140.152546] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.152547]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.152550] ata1.00: status: { DRDY ERR }
[  140.152559] ata1.00: error: { ABRT }
[  140.172492] ata1.00: configured for UDMA/133
[  140.172509] ata1: EH complete
[  140.173528] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.173531] ata1.00: BMDMA stat 0x25
[  140.173535] ata1.00: failed command: READ DMA
[  140.173541] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.173542]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.173545] ata1.00: status: { DRDY ERR }
[  140.173547] ata1.00: error: { ABRT }
[  140.176887] ath5k 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  140.176900] ath5k 0000:04:00.0: setting latency timer to 64
[  140.176952] ath5k 0000:04:00.0: registered as 'phy0'
[  140.684458] ath: EEPROM regdomain: 0x30
[  140.684461] ath: EEPROM indicates we should expect a direct regpair map
[  140.684464] ath: Country alpha2 being used: AM
[  140.684465] ath: Regpair used: 0x30
[  140.688588] ata1.00: configured for UDMA/133
[  140.688605] ata1: EH complete
[  140.688792] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.688795] ata1.00: BMDMA stat 0x25
[  140.688799] ata1.00: failed command: READ DMA
[  140.688805] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.688806]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.688809] ata1.00: status: { DRDY ERR }
[  140.688811] ata1.00: error: { ABRT }
[  140.704447] ata1.00: configured for UDMA/133
[  140.704456] ata1: EH complete
[  140.704603] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.704606] ata1.00: BMDMA stat 0x25
[  140.704609] ata1.00: failed command: READ DMA
[  140.704615] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.704616]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.704619] ata1.00: status: { DRDY ERR }
[  140.704621] ata1.00: error: { ABRT }
[  140.720348] ata1.00: configured for UDMA/133
[  140.720357] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  140.720361] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  140.720365] Descriptor sense data with sense descriptors (in hex):
[  140.720367]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  140.720375]         00 00 00 00 
[  140.720378] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  140.720383] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  140.720390] end_request: I/O error, dev sda, sector 0
[  140.720394] Buffer I/O error on device sda, logical block 0
[  140.720404] ata1: EH complete
[  140.720589] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.720592] ata1.00: BMDMA stat 0x25
[  140.720595] ata1.00: failed command: READ DMA
[  140.720601] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.720602]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.720605] ata1.00: status: { DRDY ERR }
[  140.720607] ata1.00: error: { ABRT }
[  140.736342] ata1.00: configured for UDMA/133
[  140.736351] ata1: EH complete
[  140.736502] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.736505] ata1.00: BMDMA stat 0x25
[  140.736508] ata1.00: failed command: READ DMA
[  140.736514] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.736515]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.736518] ata1.00: status: { DRDY ERR }
[  140.736520] ata1.00: error: { ABRT }
[  140.752384] ata1.00: configured for UDMA/133
[  140.752393] ata1: EH complete
[  140.752542] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.752545] ata1.00: BMDMA stat 0x25
[  140.752548] ata1.00: failed command: READ DMA
[  140.752554] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.752555]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.752558] ata1.00: status: { DRDY ERR }
[  140.752560] ata1.00: error: { ABRT }
[  140.768358] ata1.00: configured for UDMA/133
[  140.768364] ata1: EH complete
[  140.768524] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.768527] ata1.00: BMDMA stat 0x25
[  140.768530] ata1.00: failed command: READ DMA
[  140.768536] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.768537]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.768540] ata1.00: status: { DRDY ERR }
[  140.768542] ata1.00: error: { ABRT }
[  140.784510] ata1.00: configured for UDMA/133
[  140.784517] ata1: EH complete
[  140.784677] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.784680] ata1.00: BMDMA stat 0x25
[  140.784683] ata1.00: failed command: READ DMA
[  140.784689] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.784690]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.784693] ata1.00: status: { DRDY ERR }
[  140.784695] ata1.00: error: { ABRT }
[  140.800350] ata1.00: configured for UDMA/133
[  140.800362] ata1: EH complete
[  140.800511] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.800515] ata1.00: BMDMA stat 0x25
[  140.800519] ata1.00: failed command: READ DMA
[  140.800524] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.800526]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.800528] ata1.00: status: { DRDY ERR }
[  140.800531] ata1.00: error: { ABRT }
[  140.816360] ata1.00: configured for UDMA/133
[  140.816369] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  140.816373] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  140.816377] Descriptor sense data with sense descriptors (in hex):
[  140.816379]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  140.816387]         00 00 00 00 
[  140.816390] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  140.816395] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  140.816402] end_request: I/O error, dev sda, sector 0
[  140.816405] Buffer I/O error on device sda, logical block 0
[  140.816413] ata1: EH complete
[  140.816598] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.816600] ata1.00: BMDMA stat 0x25
[  140.816603] ata1.00: failed command: READ DMA
[  140.816609] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.816610]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.816613] ata1.00: status: { DRDY ERR }
[  140.816615] ata1.00: error: { ABRT }
[  140.832371] ata1.00: configured for UDMA/133
[  140.832380] ata1: EH complete
[  140.832534] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.832537] ata1.00: BMDMA stat 0x25
[  140.832540] ata1.00: failed command: READ DMA
[  140.832546] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.832547]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.832550] ata1.00: status: { DRDY ERR }
[  140.832552] ata1.00: error: { ABRT }
[  140.848354] ata1.00: configured for UDMA/133
[  140.848363] ata1: EH complete
[  140.848526] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.848529] ata1.00: BMDMA stat 0x25
[  140.848532] ata1.00: failed command: READ DMA
[  140.848538] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.848539]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.848542] ata1.00: status: { DRDY ERR }
[  140.848544] ata1.00: error: { ABRT }
[  140.864436] ata1.00: configured for UDMA/133
[  140.864445] ata1: EH complete
[  140.864591] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.864594] ata1.00: BMDMA stat 0x25
[  140.864598] ata1.00: failed command: READ DMA
[  140.864603] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.864605]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.864607] ata1.00: status: { DRDY ERR }
[  140.864610] ata1.00: error: { ABRT }
[  140.880345] ata1.00: configured for UDMA/133
[  140.880352] ata1: EH complete
[  140.880503] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.880506] ata1.00: BMDMA stat 0x25
[  140.880509] ata1.00: failed command: READ DMA
[  140.880515] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.880516]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.880519] ata1.00: status: { DRDY ERR }
[  140.880521] ata1.00: error: { ABRT }
[  140.886157] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04711/0xa04000/0x0
[  140.896423] ata1.00: configured for UDMA/133
[  140.896441] ata1: EH complete
[  140.896592] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.896595] ata1.00: BMDMA stat 0x25
[  140.896599] ata1.00: failed command: READ DMA
[  140.896605] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.896606]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.896609] ata1.00: status: { DRDY ERR }
[  140.896611] ata1.00: error: { ABRT }
[  140.912362] ata1.00: configured for UDMA/133
[  140.912376] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  140.912380] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  140.912384] Descriptor sense data with sense descriptors (in hex):
[  140.912385]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  140.912394]         00 00 00 00 
[  140.912397] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  140.912401] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  140.912409] end_request: I/O error, dev sda, sector 0
[  140.912413] Buffer I/O error on device sda, logical block 0
[  140.912431] ata1: EH complete
[  140.912642] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.912645] ata1.00: BMDMA stat 0x25
[  140.912648] ata1.00: failed command: READ DMA
[  140.912654] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.912655]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.912658] ata1.00: status: { DRDY ERR }
[  140.912660] ata1.00: error: { ABRT }
[  140.939679] ata1.00: configured for UDMA/133
[  140.939696] ata1: EH complete
[  140.940243] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.940246] ata1.00: BMDMA stat 0x25
[  140.940250] ata1.00: failed command: READ DMA
[  140.940256] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.940258]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.940260] ata1.00: status: { DRDY ERR }
[  140.940263] ata1.00: error: { ABRT }
[  140.943810] cfg80211: World regulatory domain updated:
[  140.943813]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  140.943816]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  140.943819]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  140.943822]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  140.943824]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  140.943827]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  140.956363] ata1.00: configured for UDMA/133
[  140.956376] ata1: EH complete
[  140.956527] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.956530] ata1.00: BMDMA stat 0x25
[  140.956534] ata1.00: failed command: READ DMA
[  140.956540] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.956541]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.956544] ata1.00: status: { DRDY ERR }
[  140.956546] ata1.00: error: { ABRT }
[  140.956815] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[  140.972396] ata1.00: configured for UDMA/133
[  140.972411] ata1: EH complete
[  140.972577] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.972580] ata1.00: BMDMA stat 0x25
[  140.972584] ata1.00: failed command: READ DMA
[  140.972590] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.972591]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.972594] ata1.00: status: { DRDY ERR }
[  140.972596] ata1.00: error: { ABRT }
[  140.992646] ata1.00: configured for UDMA/133
[  140.992663] ata1: EH complete
[  140.992821] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  140.992825] ata1.00: BMDMA stat 0x25
[  140.992828] ata1.00: failed command: READ DMA
[  140.992835] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  140.992836]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  140.992839] ata1.00: status: { DRDY ERR }
[  140.992841] ata1.00: error: { ABRT }
[  141.008388] ata1.00: configured for UDMA/133
[  141.008400] ata1: EH complete
[  141.008565] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.008568] ata1.00: BMDMA stat 0x25
[  141.008572] ata1.00: failed command: READ DMA
[  141.008578] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.008579]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.008582] ata1.00: status: { DRDY ERR }
[  141.008584] ata1.00: error: { ABRT }
[  141.024700] ata1.00: configured for UDMA/133
[  141.024712] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  141.024716] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  141.024720] Descriptor sense data with sense descriptors (in hex):
[  141.024722]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  141.024730]         00 00 00 00 
[  141.024733] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  141.024737] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  141.024745] end_request: I/O error, dev sda, sector 0
[  141.024749] Buffer I/O error on device sda, logical block 0
[  141.024760] ata1: EH complete
[  141.024947] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.024950] ata1.00: BMDMA stat 0x25
[  141.024953] ata1.00: failed command: READ DMA
[  141.024959] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.024960]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.024963] ata1.00: status: { DRDY ERR }
[  141.024965] ata1.00: error: { ABRT }
[  141.040384] ata1.00: configured for UDMA/133
[  141.040400] ata1: EH complete
[  141.040554] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.040558] ata1.00: BMDMA stat 0x25
[  141.040561] ata1.00: failed command: READ DMA
[  141.040567] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.040568]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.040571] ata1.00: status: { DRDY ERR }
[  141.040573] ata1.00: error: { ABRT }
[  141.056386] ata1.00: configured for UDMA/133
[  141.056396] ata1: EH complete
[  141.056559] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.056562] ata1.00: BMDMA stat 0x25
[  141.056566] ata1.00: failed command: READ DMA
[  141.056571] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.056573]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.056575] ata1.00: status: { DRDY ERR }
[  141.056578] ata1.00: error: { ABRT }
[  141.072419] ata1.00: configured for UDMA/133
[  141.072438] ata1: EH complete
[  141.072603] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.072606] ata1.00: BMDMA stat 0x25
[  141.072610] ata1.00: failed command: READ DMA
[  141.072616] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.072617]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.072620] ata1.00: status: { DRDY ERR }
[  141.072622] ata1.00: error: { ABRT }
[  141.088384] ata1.00: configured for UDMA/133
[  141.088400] ata1: EH complete
[  141.088560] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.088563] ata1.00: BMDMA stat 0x25
[  141.088567] ata1.00: failed command: READ DMA
[  141.088572] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.088574]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.088577] ata1.00: status: { DRDY ERR }
[  141.088579] ata1.00: error: { ABRT }
[  141.108633] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  141.108637] Bluetooth: BNEP filters: protocol multicast
[  141.114072] ata1.00: configured for UDMA/133
[  141.114090] ata1: EH complete
[  141.114246] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.114250] ata1.00: BMDMA stat 0x25
[  141.114253] ata1.00: failed command: READ DMA
[  141.114259] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.114260]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.114263] ata1.00: status: { DRDY ERR }
[  141.114265] ata1.00: error: { ABRT }
[  141.128417] ata1.00: configured for UDMA/133
[  141.128435] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  141.128438] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  141.128443] Descriptor sense data with sense descriptors (in hex):
[  141.128445]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  141.128453]         00 00 00 00 
[  141.128456] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  141.128461] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  141.128468] end_request: I/O error, dev sda, sector 0
[  141.128473] Buffer I/O error on device sda, logical block 0
[  141.128492] ata1: EH complete
[  141.128694] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.128697] ata1.00: BMDMA stat 0x25
[  141.128700] ata1.00: failed command: READ DMA
[  141.128706] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.128708]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.128710] ata1.00: status: { DRDY ERR }
[  141.128712] ata1.00: error: { ABRT }
[  141.148282] ata1.00: configured for UDMA/133
[  141.148315] ata1: EH complete
[  141.148753] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.148757] ata1.00: BMDMA stat 0x25
[  141.148761] ata1.00: failed command: READ DMA
[  141.148767] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.148768]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.148771] ata1.00: status: { DRDY ERR }
[  141.148774] ata1.00: error: { ABRT }
[  141.168343] ata1.00: configured for UDMA/133
[  141.168355] ata1: EH complete
[  141.168508] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.168512] ata1.00: BMDMA stat 0x25
[  141.168515] ata1.00: failed command: READ DMA
[  141.168521] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.168522]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.168525] ata1.00: status: { DRDY ERR }
[  141.168527] ata1.00: error: { ABRT }
[  141.184379] ata1.00: configured for UDMA/133
[  141.184389] ata1: EH complete
[  141.184550] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.184553] ata1.00: BMDMA stat 0x25
[  141.184556] ata1.00: failed command: READ DMA
[  141.184562] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.184564]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.184566] ata1.00: status: { DRDY ERR }
[  141.184568] ata1.00: error: { ABRT }
[  141.200384] ata1.00: configured for UDMA/133
[  141.200393] ata1: EH complete
[  141.200554] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.200558] ata1.00: BMDMA stat 0x25
[  141.200561] ata1.00: failed command: READ DMA
[  141.200567] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.200568]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.200571] ata1.00: status: { DRDY ERR }
[  141.200573] ata1.00: error: { ABRT }
[  141.216368] ata1.00: configured for UDMA/133
[  141.216378] ata1: EH complete
[  141.216542] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.216545] ata1.00: BMDMA stat 0x25
[  141.216548] ata1.00: failed command: READ DMA
[  141.216554] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.216555]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.216558] ata1.00: status: { DRDY ERR }
[  141.216560] ata1.00: error: { ABRT }
[  141.247740] ata1.00: configured for UDMA/133
[  141.247758] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  141.247762] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  141.247766] Descriptor sense data with sense descriptors (in hex):
[  141.247768]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  141.247776]         00 00 00 00 
[  141.247779] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  141.247783] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  141.247791] end_request: I/O error, dev sda, sector 0
[  141.247796] Buffer I/O error on device sda, logical block 0
[  141.247813] ata1: EH complete
[  141.248307] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.248311] ata1.00: BMDMA stat 0x25
[  141.248315] ata1.00: failed command: READ DMA
[  141.248321] ata1.00: cmd c8/00:08:38:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.248322]          res 51/04:08:38:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.248325] ata1.00: status: { DRDY ERR }
[  141.248327] ata1.00: error: { ABRT }
[  141.262029] phy0: Selected rate control algorithm 'minstrel'
[  141.262494] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[  141.262917] cfg80211: Calling CRDA for country: AM
[  141.265206] ata1.00: configured for UDMA/133
[  141.265223] ata1: EH complete
[  141.265700] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.265704] ata1.00: BMDMA stat 0x25
[  141.265708] ata1.00: failed command: READ DMA
[  141.265714] ata1.00: cmd c8/00:08:38:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.265716]          res 51/04:08:38:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.265718] ata1.00: status: { DRDY ERR }
[  141.265721] ata1.00: error: { ABRT }
[  141.277983] cfg80211: Regulatory domain changed to country: AM
[  141.277986]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  141.277989]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  141.277992]     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[  141.277994]     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[  141.280439] ata1.00: configured for UDMA/133
[  141.280456] ata1: EH complete
[  141.280653] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.280656] ata1.00: BMDMA stat 0x25
[  141.280660] ata1.00: failed command: READ DMA
[  141.280666] ata1.00: cmd c8/00:08:38:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.280667]          res 51/04:08:38:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.280670] ata1.00: status: { DRDY ERR }
[  141.280672] ata1.00: error: { ABRT }
[  141.291683] ata1.00: configured for UDMA/133
[  141.291701] ata1: EH complete
[  141.295586] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.295591] ata1.00: BMDMA stat 0x25
[  141.295595] ata1.00: failed command: READ DMA
[  141.295601] ata1.00: cmd c8/00:08:38:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.295603]          res 51/04:08:38:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.295606] ata1.00: status: { DRDY ERR }
[  141.295608] ata1.00: error: { ABRT }
[  141.308945] ata1.00: configured for UDMA/133
[  141.308962] ata1: EH complete
[  141.309780] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.309784] ata1.00: BMDMA stat 0x25
[  141.309788] ata1.00: failed command: READ DMA
[  141.309794] ata1.00: cmd c8/00:08:38:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.309795]          res 51/04:08:38:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.309798] ata1.00: status: { DRDY ERR }
[  141.309800] ata1.00: error: { ABRT }
[  141.315895] Bluetooth: SCO (Voice Link) ver 0.6
[  141.315899] Bluetooth: SCO socket layer initialized
[  141.325067] ata1.00: configured for UDMA/133
[  141.325085] ata1: EH complete
[  141.325238] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.325241] ata1.00: BMDMA stat 0x25
[  141.325245] ata1.00: failed command: READ DMA
[  141.325251] ata1.00: cmd c8/00:08:38:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.325252]          res 51/04:08:38:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.325255] ata1.00: status: { DRDY ERR }
[  141.325257] ata1.00: error: { ABRT }
[  141.343419] ata1.00: configured for UDMA/133
[  141.343439] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  141.343442] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  141.343446] Descriptor sense data with sense descriptors (in hex):
[  141.343448]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  141.343456]         00 00 00 38 
[  141.343460] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  141.343464] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 38 00 00 08 00
[  141.343472] end_request: I/O error, dev sda, sector 56
[  141.343495] ata1: EH complete
[  141.343972] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.343975] ata1.00: BMDMA stat 0x25
[  141.343979] ata1.00: failed command: READ DMA
[  141.343985] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.343986]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.343989] ata1.00: status: { DRDY ERR }
[  141.343991] ata1.00: error: { ABRT }
[  141.363417] r8169 0000:02:00.0: eth0: link up
[  141.363426] r8169 0000:02:00.0: eth0: link up
[  141.364466] ata1.00: configured for UDMA/133
[  141.364483] ata1: EH complete
[  141.364637] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.364640] ata1.00: BMDMA stat 0x25
[  141.364644] ata1.00: failed command: READ DMA
[  141.364650] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.364651]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.364654] ata1.00: status: { DRDY ERR }
[  141.364656] ata1.00: error: { ABRT }
[  141.380381] ata1.00: configured for UDMA/133
[  141.380397] ata1: EH complete
[  141.380559] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.380562] ata1.00: BMDMA stat 0x25
[  141.380566] ata1.00: failed command: READ DMA
[  141.380572] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.380574]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.380576] ata1.00: status: { DRDY ERR }
[  141.380579] ata1.00: error: { ABRT }
[  141.405895] ata1.00: configured for UDMA/133
[  141.405913] ata1: EH complete
[  141.406073] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.406077] ata1.00: BMDMA stat 0x25
[  141.406080] ata1.00: failed command: READ DMA
[  141.406086] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.406087]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.406090] ata1.00: status: { DRDY ERR }
[  141.406092] ata1.00: error: { ABRT }
[  141.421423] ata1.00: configured for UDMA/133
[  141.421441] ata1: EH complete
[  141.421599] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.421603] ata1.00: BMDMA stat 0x25
[  141.421607] ata1.00: failed command: READ DMA
[  141.421613] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.421614]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.421617] ata1.00: status: { DRDY ERR }
[  141.421619] ata1.00: error: { ABRT }
[  141.439070] ata1.00: configured for UDMA/133
[  141.439083] ata1: EH complete
[  141.439255] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.439258] ata1.00: BMDMA stat 0x25
[  141.439262] ata1.00: failed command: READ DMA
[  141.439268] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.439269]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.439272] ata1.00: status: { DRDY ERR }
[  141.439274] ata1.00: error: { ABRT }
[  141.453458] ata1.00: configured for UDMA/133
[  141.453477] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  141.453481] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  141.453485] Descriptor sense data with sense descriptors (in hex):
[  141.453487]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  141.453495]         00 00 00 00 
[  141.453498] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  141.453503] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  141.453510] end_request: I/O error, dev sda, sector 0
[  141.453528] ata1: EH complete
[  141.453727] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.453730] ata1.00: BMDMA stat 0x25
[  141.453733] ata1.00: failed command: READ DMA
[  141.453739] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.453741]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.453743] ata1.00: status: { DRDY ERR }
[  141.453745] ata1.00: error: { ABRT }
[  141.461491] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  141.468397] ata1.00: configured for UDMA/133
[  141.468415] ata1: EH complete
[  141.468567] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.468570] ata1.00: BMDMA stat 0x25
[  141.468574] ata1.00: failed command: READ DMA
[  141.468580] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.468581]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.468584] ata1.00: status: { DRDY ERR }
[  141.468586] ata1.00: error: { ABRT }
[  141.484594] ata1.00: configured for UDMA/133
[  141.484612] ata1: EH complete
[  141.484930] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.484933] ata1.00: BMDMA stat 0x25
[  141.484937] ata1.00: failed command: READ DMA
[  141.484943] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.484944]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.484947] ata1.00: status: { DRDY ERR }
[  141.484949] ata1.00: error: { ABRT }
[  141.500424] ata1.00: configured for UDMA/133
[  141.500442] ata1: EH complete
[  141.500614] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.500618] ata1.00: BMDMA stat 0x25
[  141.500622] ata1.00: failed command: READ DMA
[  141.500628] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.500629]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.500632] ata1.00: status: { DRDY ERR }
[  141.500634] ata1.00: error: { ABRT }
[  141.514343]   alloc irq_desc for 22 on node -1
[  141.514346]   alloc kstat_irqs on node -1
[  141.514353] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  141.514412]   alloc irq_desc for 48 on node -1
[  141.514413]   alloc kstat_irqs on node -1
[  141.514424] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[  141.514459] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  141.516439] ata1.00: configured for UDMA/133
[  141.516457] ata1: EH complete
[  141.516664] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.516668] ata1.00: BMDMA stat 0x25
[  141.516672] ata1.00: failed command: READ DMA
[  141.516677] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.516679]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.516682] ata1.00: status: { DRDY ERR }
[  141.516684] ata1.00: error: { ABRT }
[  141.533555] ata1.00: configured for UDMA/133
[  141.533571] ata1: EH complete
[  141.533818] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.533822] ata1.00: BMDMA stat 0x25
[  141.533825] ata1.00: failed command: READ DMA
[  141.533831] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.533833]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.533836] ata1.00: status: { DRDY ERR }
[  141.533838] ata1.00: error: { ABRT }
[  141.548398] ata1.00: configured for UDMA/133
[  141.548416] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  141.548420] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  141.548424] Descriptor sense data with sense descriptors (in hex):
[  141.548426]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  141.548434]         00 00 00 00 
[  141.548437] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  141.548442] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  141.548450] end_request: I/O error, dev sda, sector 0
[  141.548469] ata1: EH complete
[  141.548700] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.548703] ata1.00: BMDMA stat 0x25
[  141.548707] ata1.00: failed command: READ DMA EXT
[  141.548713] ata1.00: cmd 25/00:08:00:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.548714]          res 51/04:08:00:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.548717] ata1.00: status: { DRDY ERR }
[  141.548719] ata1.00: error: { ABRT }
[  141.564378] ata1.00: configured for UDMA/133
[  141.564393] ata1: EH complete
[  141.564560] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.564564] ata1.00: BMDMA stat 0x25
[  141.564567] ata1.00: failed command: READ DMA EXT
[  141.564573] ata1.00: cmd 25/00:08:00:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.564574]          res 51/04:08:00:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.564577] ata1.00: status: { DRDY ERR }
[  141.564579] ata1.00: error: { ABRT }
[  141.582880] ata1.00: configured for UDMA/133
[  141.582898] ata1: EH complete
[  141.583065] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.583068] ata1.00: BMDMA stat 0x25
[  141.583072] ata1.00: failed command: READ DMA EXT
[  141.583078] ata1.00: cmd 25/00:08:00:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.583079]          res 51/04:08:00:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.583082] ata1.00: status: { DRDY ERR }
[  141.583084] ata1.00: error: { ABRT }
[  141.596863] ata1.00: configured for UDMA/133
[  141.596881] ata1: EH complete
[  141.597403] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.597407] ata1.00: BMDMA stat 0x25
[  141.597411] ata1.00: failed command: READ DMA EXT
[  141.597417] ata1.00: cmd 25/00:08:00:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.597418]          res 51/04:08:00:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.597421] ata1.00: status: { DRDY ERR }
[  141.597423] ata1.00: error: { ABRT }
[  141.612939] ata1.00: configured for UDMA/133
[  141.612957] ata1: EH complete
[  141.613126] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.613130] ata1.00: BMDMA stat 0x25
[  141.613133] ata1.00: failed command: READ DMA EXT
[  141.613139] ata1.00: cmd 25/00:08:00:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.613141]          res 51/04:08:00:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.613143] ata1.00: status: { DRDY ERR }
[  141.613145] ata1.00: error: { ABRT }
[  141.628366] ata1.00: configured for UDMA/133
[  141.628385] ata1: EH complete
[  141.628552] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.628555] ata1.00: BMDMA stat 0x25
[  141.628559] ata1.00: failed command: READ DMA EXT
[  141.628565] ata1.00: cmd 25/00:08:00:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.628566]          res 51/04:08:00:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.628569] ata1.00: status: { DRDY ERR }
[  141.628571] ata1.00: error: { ABRT }
[  141.644815] ata1.00: configured for UDMA/133
[  141.644833] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  141.644836] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  141.644840] Descriptor sense data with sense descriptors (in hex):
[  141.644842]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  141.644851]         12 a1 9e 00 
[  141.644854] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  141.644858] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e 00 00 00 08 00
[  141.644866] end_request: I/O error, dev sda, sector 312581632
[  141.644885] ata1: EH complete
[  141.645880] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.645884] ata1.00: BMDMA stat 0x25
[  141.645888] ata1.00: failed command: READ DMA EXT
[  141.645894] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.645895]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.645898] ata1.00: status: { DRDY ERR }
[  141.645900] ata1.00: error: { ABRT }
[  141.647163] hda_codec: ALC269: BIOS auto-probing.
[  141.660397] ata1.00: configured for UDMA/133
[  141.660409] ata1: EH complete
[  141.660576] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.660580] ata1.00: BMDMA stat 0x25
[  141.660583] ata1.00: failed command: READ DMA EXT
[  141.660590] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.660591]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.660594] ata1.00: status: { DRDY ERR }
[  141.660596] ata1.00: error: { ABRT }
[  141.676370] ata1.00: configured for UDMA/133
[  141.676389] ata1: EH complete
[  141.676556] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.676559] ata1.00: BMDMA stat 0x25
[  141.676563] ata1.00: failed command: READ DMA EXT
[  141.676569] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.676570]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.676573] ata1.00: status: { DRDY ERR }
[  141.676575] ata1.00: error: { ABRT }
[  141.692440] ata1.00: configured for UDMA/133
[  141.692455] ata1: EH complete
[  141.692708] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.692712] ata1.00: BMDMA stat 0x25
[  141.692715] ata1.00: failed command: READ DMA EXT
[  141.692722] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.692723]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.692726] ata1.00: status: { DRDY ERR }
[  141.692728] ata1.00: error: { ABRT }
[  141.708418] ata1.00: configured for UDMA/133
[  141.708440] ata1: EH complete
[  141.708609] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.708613] ata1.00: BMDMA stat 0x25
[  141.708616] ata1.00: failed command: READ DMA EXT
[  141.708622] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.708624]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.708626] ata1.00: status: { DRDY ERR }
[  141.708628] ata1.00: error: { ABRT }
[  141.724372] ata1.00: configured for UDMA/133
[  141.724390] ata1: EH complete
[  141.724560] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.724563] ata1.00: BMDMA stat 0x25
[  141.724567] ata1.00: failed command: READ DMA EXT
[  141.724573] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.724574]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.724577] ata1.00: status: { DRDY ERR }
[  141.724579] ata1.00: error: { ABRT }
[  141.743380] ata1.00: configured for UDMA/133
[  141.743395] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  141.743398] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  141.743403] Descriptor sense data with sense descriptors (in hex):
[  141.743405]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  141.743413]         12 a1 9e a0 
[  141.743416] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  141.743421] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a0 00 00 08 00
[  141.743428] end_request: I/O error, dev sda, sector 312581792
[  141.743443] ata1: EH complete
[  141.743639] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.743642] ata1.00: BMDMA stat 0x25
[  141.743645] ata1.00: failed command: READ DMA
[  141.743651] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.743652]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.743655] ata1.00: status: { DRDY ERR }
[  141.743657] ata1.00: error: { ABRT }
[  141.756375] ata1.00: configured for UDMA/133
[  141.756392] ata1: EH complete
[  141.756545] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.756548] ata1.00: BMDMA stat 0x25
[  141.756552] ata1.00: failed command: READ DMA
[  141.756558] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.756559]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.756562] ata1.00: status: { DRDY ERR }
[  141.756564] ata1.00: error: { ABRT }
[  141.765404] Bluetooth: RFCOMM TTY layer initialized
[  141.765410] Bluetooth: RFCOMM socket layer initialized
[  141.765412] Bluetooth: RFCOMM ver 1.11
[  141.772398] ata1.00: configured for UDMA/133
[  141.772413] ata1: EH complete
[  141.772567] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.772571] ata1.00: BMDMA stat 0x25
[  141.772574] ata1.00: failed command: READ DMA
[  141.772580] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.772582]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.772584] ata1.00: status: { DRDY ERR }
[  141.772587] ata1.00: error: { ABRT }
[  141.788483] ata1.00: configured for UDMA/133
[  141.788499] ata1: EH complete
[  141.788819] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.788823] ata1.00: BMDMA stat 0x25
[  141.788827] ata1.00: failed command: READ DMA
[  141.788833] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.788834]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.788837] ata1.00: status: { DRDY ERR }
[  141.788839] ata1.00: error: { ABRT }
[  141.812415] ata1.00: configured for UDMA/133
[  141.812432] ata1: EH complete
[  141.812617] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.812621] ata1.00: BMDMA stat 0x25
[  141.812624] ata1.00: failed command: READ DMA
[  141.812630] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.812632]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.812635] ata1.00: status: { DRDY ERR }
[  141.812637] ata1.00: error: { ABRT }
[  141.828371] ata1.00: configured for UDMA/133
[  141.828383] ata1: EH complete
[  141.828543] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.828547] ata1.00: BMDMA stat 0x25
[  141.828550] ata1.00: failed command: READ DMA
[  141.828556] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.828558]          res 51/04:08:00:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.828560] ata1.00: status: { DRDY ERR }
[  141.828562] ata1.00: error: { ABRT }
[  141.844374] ata1.00: configured for UDMA/133
[  141.844390] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  141.844394] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  141.844398] Descriptor sense data with sense descriptors (in hex):
[  141.844400]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  141.844407]         00 00 00 00 
[  141.844411] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  141.844415] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  141.844423] end_request: I/O error, dev sda, sector 0
[  141.844440] ata1: EH complete
[  141.844650] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.844653] ata1.00: BMDMA stat 0x25
[  141.844656] ata1.00: failed command: READ DMA
[  141.844662] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.844663]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.844666] ata1.00: status: { DRDY ERR }
[  141.844668] ata1.00: error: { ABRT }
[  141.860383] ata1.00: configured for UDMA/133
[  141.860396] ata1: EH complete
[  141.860557] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.860560] ata1.00: BMDMA stat 0x25
[  141.860564] ata1.00: failed command: READ DMA
[  141.860570] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.860571]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.860574] ata1.00: status: { DRDY ERR }
[  141.860576] ata1.00: error: { ABRT }
[  141.876436] ata1.00: configured for UDMA/133
[  141.876454] ata1: EH complete
[  141.876611] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.876615] ata1.00: BMDMA stat 0x25
[  141.876618] ata1.00: failed command: READ DMA
[  141.876624] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.876625]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.876668] ata1.00: status: { DRDY ERR }
[  141.876670] ata1.00: error: { ABRT }
[  141.895712] ata1.00: configured for UDMA/133
[  141.895730] ata1: EH complete
[  141.896378] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.896382] ata1.00: BMDMA stat 0x25
[  141.896386] ata1.00: failed command: READ DMA
[  141.896392] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.896393]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.896396] ata1.00: status: { DRDY ERR }
[  141.896398] ata1.00: error: { ABRT }
[  141.912380] ata1.00: configured for UDMA/133
[  141.912392] ata1: EH complete
[  141.912557] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.912560] ata1.00: BMDMA stat 0x25
[  141.912564] ata1.00: failed command: READ DMA
[  141.912570] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.912571]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.912574] ata1.00: status: { DRDY ERR }
[  141.912576] ata1.00: error: { ABRT }
[  141.928391] ata1.00: configured for UDMA/133
[  141.928405] ata1: EH complete
[  141.928581] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.928584] ata1.00: BMDMA stat 0x25
[  141.928588] ata1.00: failed command: READ DMA
[  141.928594] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  141.928595]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.928598] ata1.00: status: { DRDY ERR }
[  141.928600] ata1.00: error: { ABRT }
[  141.944393] ata1.00: configured for UDMA/133
[  141.944410] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  141.944414] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  141.944418] Descriptor sense data with sense descriptors (in hex):
[  141.944420]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  141.944428]         00 00 00 08 
[  141.944432] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  141.944436] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 08 00 00 08 00
[  141.944444] end_request: I/O error, dev sda, sector 8
[  141.944464] ata1: EH complete
[  141.944685] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.944688] ata1.00: BMDMA stat 0x25
[  141.944691] ata1.00: failed command: READ DMA EXT
[  141.944697] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.944699]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.944701] ata1.00: status: { DRDY ERR }
[  141.944703] ata1.00: error: { ABRT }
[  141.960454] ata1.00: configured for UDMA/133
[  141.960472] ata1: EH complete
[  141.960634] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.960637] ata1.00: BMDMA stat 0x25
[  141.960641] ata1.00: failed command: READ DMA EXT
[  141.960647] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.960648]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.960651] ata1.00: status: { DRDY ERR }
[  141.960653] ata1.00: error: { ABRT }
[  141.976477] ata1.00: configured for UDMA/133
[  141.976496] ata1: EH complete
[  141.976658] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.976662] ata1.00: BMDMA stat 0x25
[  141.976665] ata1.00: failed command: READ DMA EXT
[  141.976671] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.976673]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.976675] ata1.00: status: { DRDY ERR }
[  141.976677] ata1.00: error: { ABRT }
[  141.992382] ata1.00: configured for UDMA/133
[  141.992396] ata1: EH complete
[  141.992570] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  141.992573] ata1.00: BMDMA stat 0x25
[  141.992577] ata1.00: failed command: READ DMA EXT
[  141.992583] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  141.992584]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  141.992587] ata1.00: status: { DRDY ERR }
[  141.992589] ata1.00: error: { ABRT }
[  142.008387] ata1.00: configured for UDMA/133
[  142.008395] ata1: EH complete
[  142.008573] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.008576] ata1.00: BMDMA stat 0x25
[  142.008579] ata1.00: failed command: READ DMA EXT
[  142.008585] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.008586]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.008589] ata1.00: status: { DRDY ERR }
[  142.008591] ata1.00: error: { ABRT }
[  142.025195] ata1.00: configured for UDMA/133
[  142.025210] ata1: EH complete
[  142.025379] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.025383] ata1.00: BMDMA stat 0x25
[  142.025386] ata1.00: failed command: READ DMA EXT
[  142.025392] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.025393]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.025396] ata1.00: status: { DRDY ERR }
[  142.025398] ata1.00: error: { ABRT }
[  142.040379] ata1.00: configured for UDMA/133
[  142.040395] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  142.040399] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  142.040403] Descriptor sense data with sense descriptors (in hex):
[  142.040405]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  142.040413]         12 a1 9e a8 
[  142.040416] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  142.040421] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[  142.040429] end_request: I/O error, dev sda, sector 312581800
[  142.040444] ata1: EH complete
[  142.040657] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.040660] ata1.00: BMDMA stat 0x25
[  142.040664] ata1.00: failed command: READ DMA EXT
[  142.040670] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.040671]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.040674] ata1.00: status: { DRDY ERR }
[  142.040676] ata1.00: error: { ABRT }
[  142.056364] ata1.00: configured for UDMA/133
[  142.056377] ata1: EH complete
[  142.056550] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.056553] ata1.00: BMDMA stat 0x25
[  142.056557] ata1.00: failed command: READ DMA EXT
[  142.056563] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.056564]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.056567] ata1.00: status: { DRDY ERR }
[  142.056569] ata1.00: error: { ABRT }
[  142.072387] ata1.00: configured for UDMA/133
[  142.072404] ata1: EH complete
[  142.072573] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.072577] ata1.00: BMDMA stat 0x25
[  142.072581] ata1.00: failed command: READ DMA EXT
[  142.072587] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.072588]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.072591] ata1.00: status: { DRDY ERR }
[  142.072593] ata1.00: error: { ABRT }
[  142.088403] ata1.00: configured for UDMA/133
[  142.088426] ata1: EH complete
[  142.088607] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.088611] ata1.00: BMDMA stat 0x25
[  142.088614] ata1.00: failed command: READ DMA EXT
[  142.088621] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.088622]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.088625] ata1.00: status: { DRDY ERR }
[  142.088627] ata1.00: error: { ABRT }
[  142.104399] ata1.00: configured for UDMA/133
[  142.104415] ata1: EH complete
[  142.104617] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.104620] ata1.00: BMDMA stat 0x25
[  142.104624] ata1.00: failed command: READ DMA EXT
[  142.104630] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.104631]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.104634] ata1.00: status: { DRDY ERR }
[  142.104636] ata1.00: error: { ABRT }
[  142.112387] ata1.00: configured for UDMA/133
[  142.112399] ata1: EH complete
[  142.112564] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.112567] ata1.00: BMDMA stat 0x25
[  142.112571] ata1.00: failed command: READ DMA EXT
[  142.112577] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.112578]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.112581] ata1.00: status: { DRDY ERR }
[  142.112583] ata1.00: error: { ABRT }
[  142.128855] ata1.00: configured for UDMA/133
[  142.128869] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  142.128873] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  142.128877] Descriptor sense data with sense descriptors (in hex):
[  142.128879]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  142.128887]         12 a1 9e a8 
[  142.128890] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  142.128895] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[  142.128902] end_request: I/O error, dev sda, sector 312581800
[  142.128926] ata1: EH complete
[  142.129132] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.129135] ata1.00: BMDMA stat 0x25
[  142.129139] ata1.00: failed command: READ DMA EXT
[  142.129145] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.129146]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.129149] ata1.00: status: { DRDY ERR }
[  142.129151] ata1.00: error: { ABRT }
[  142.144381] ata1.00: configured for UDMA/133
[  142.144399] ata1: EH complete
[  142.144573] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.144576] ata1.00: BMDMA stat 0x25
[  142.144580] ata1.00: failed command: READ DMA EXT
[  142.144586] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.144587]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.144590] ata1.00: status: { DRDY ERR }
[  142.144592] ata1.00: error: { ABRT }
[  142.160812] ata1.00: configured for UDMA/133
[  142.160829] ata1: EH complete
[  142.161375] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.161379] ata1.00: BMDMA stat 0x25
[  142.161383] ata1.00: failed command: READ DMA EXT
[  142.161389] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.161390]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.161393] ata1.00: status: { DRDY ERR }
[  142.161395] ata1.00: error: { ABRT }
[  142.176381] ata1.00: configured for UDMA/133
[  142.176395] ata1: EH complete
[  142.176565] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.176568] ata1.00: BMDMA stat 0x25
[  142.176571] ata1.00: failed command: READ DMA EXT
[  142.176578] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.176579]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.176582] ata1.00: status: { DRDY ERR }
[  142.176584] ata1.00: error: { ABRT }
[  142.194368] ata1.00: configured for UDMA/133
[  142.194387] ata1: EH complete
[  142.194556] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.194560] ata1.00: BMDMA stat 0x25
[  142.194563] ata1.00: failed command: READ DMA EXT
[  142.194569] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.194571]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.194574] ata1.00: status: { DRDY ERR }
[  142.194576] ata1.00: error: { ABRT }
[  142.208400] ata1.00: configured for UDMA/133
[  142.208416] ata1: EH complete
[  142.208588] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.208592] ata1.00: BMDMA stat 0x25
[  142.208596] ata1.00: failed command: READ DMA EXT
[  142.208602] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.208603]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.208606] ata1.00: status: { DRDY ERR }
[  142.208608] ata1.00: error: { ABRT }
[  142.224382] ata1.00: configured for UDMA/133
[  142.224398] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  142.224402] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  142.224406] Descriptor sense data with sense descriptors (in hex):
[  142.224408]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  142.224416]         12 a1 9e a8 
[  142.224419] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  142.224424] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[  142.224432] end_request: I/O error, dev sda, sector 312581800
[  142.224450] ata1: EH complete
[  142.224675] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.224678] ata1.00: BMDMA stat 0x25
[  142.224682] ata1.00: failed command: READ DMA EXT
[  142.224687] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.224689]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.224691] ata1.00: status: { DRDY ERR }
[  142.224694] ata1.00: error: { ABRT }
[  142.240377] ata1.00: configured for UDMA/133
[  142.240387] ata1: EH complete
[  142.240557] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.240560] ata1.00: BMDMA stat 0x25
[  142.240563] ata1.00: failed command: READ DMA EXT
[  142.240569] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.240571]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.240573] ata1.00: status: { DRDY ERR }
[  142.240575] ata1.00: error: { ABRT }
[  142.256396] ata1.00: configured for UDMA/133
[  142.256406] ata1: EH complete
[  142.257102] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.257106] ata1.00: BMDMA stat 0x25
[  142.257110] ata1.00: failed command: READ DMA EXT
[  142.257116] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.257117]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.257120] ata1.00: status: { DRDY ERR }
[  142.257122] ata1.00: error: { ABRT }
[  142.272371] ata1.00: configured for UDMA/133
[  142.272390] ata1: EH complete
[  142.272554] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.272558] ata1.00: BMDMA stat 0x25
[  142.272561] ata1.00: failed command: READ DMA EXT
[  142.272567] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.272569]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.272572] ata1.00: status: { DRDY ERR }
[  142.272574] ata1.00: error: { ABRT }
[  142.288459] ata1.00: configured for UDMA/133
[  142.288474] ata1: EH complete
[  142.288665] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.288676] ata1.00: BMDMA stat 0x25
[  142.288680] ata1.00: failed command: READ DMA EXT
[  142.288686] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.288687]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.288690] ata1.00: status: { DRDY ERR }
[  142.288692] ata1.00: error: { ABRT }
[  142.307646] ata1.00: configured for UDMA/133
[  142.307661] ata1: EH complete
[  142.307825] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.307828] ata1.00: BMDMA stat 0x25
[  142.307832] ata1.00: failed command: READ DMA EXT
[  142.307838] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.307839]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.307842] ata1.00: status: { DRDY ERR }
[  142.307844] ata1.00: error: { ABRT }
[  142.320411] ata1.00: configured for UDMA/133
[  142.320428] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  142.320432] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  142.320436] Descriptor sense data with sense descriptors (in hex):
[  142.320438]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  142.320446]         12 a1 9e a8 
[  142.320450] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  142.320454] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[  142.320462] end_request: I/O error, dev sda, sector 312581800
[  142.320479] ata1: EH complete
[  142.321124] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.321128] ata1.00: BMDMA stat 0x25
[  142.321132] ata1.00: failed command: READ DMA EXT
[  142.321138] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.321139]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.321142] ata1.00: status: { DRDY ERR }
[  142.321144] ata1.00: error: { ABRT }
[  142.338365] ata1.00: configured for UDMA/133
[  142.338383] ata1: EH complete
[  142.338556] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.338559] ata1.00: BMDMA stat 0x25
[  142.338563] ata1.00: failed command: READ DMA EXT
[  142.338569] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.338571]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.338573] ata1.00: status: { DRDY ERR }
[  142.338575] ata1.00: error: { ABRT }
[  142.343349] ata1.00: configured for UDMA/133
[  142.343367] ata1: EH complete
[  142.343556] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.343560] ata1.00: BMDMA stat 0x25
[  142.343564] ata1.00: failed command: READ DMA EXT
[  142.343570] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.343571]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.343574] ata1.00: status: { DRDY ERR }
[  142.343576] ata1.00: error: { ABRT }
[  142.356429] ata1.00: configured for UDMA/133
[  142.356447] ata1: EH complete
[  142.358092] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.358096] ata1.00: BMDMA stat 0x25
[  142.358100] ata1.00: failed command: READ DMA EXT
[  142.358106] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.358107]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.358110] ata1.00: status: { DRDY ERR }
[  142.358112] ata1.00: error: { ABRT }
[  142.372377] ata1.00: configured for UDMA/133
[  142.372395] ata1: EH complete
[  142.372557] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.372560] ata1.00: BMDMA stat 0x25
[  142.372564] ata1.00: failed command: READ DMA EXT
[  142.372570] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.372571]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.372574] ata1.00: status: { DRDY ERR }
[  142.372576] ata1.00: error: { ABRT }
[  142.388419] ata1.00: configured for UDMA/133
[  142.388435] ata1: EH complete
[  142.388609] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.388612] ata1.00: BMDMA stat 0x25
[  142.388633] ata1.00: failed command: READ DMA EXT
[  142.388639] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.388640]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.388643] ata1.00: status: { DRDY ERR }
[  142.388645] ata1.00: error: { ABRT }
[  142.407828] ata1.00: configured for UDMA/133
[  142.407846] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  142.407850] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  142.407854] Descriptor sense data with sense descriptors (in hex):
[  142.407855]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  142.407864]         12 a1 9e a8 
[  142.407867] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  142.407871] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[  142.407879] end_request: I/O error, dev sda, sector 312581800
[  142.407897] ata1: EH complete
[  142.408733] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.408736] ata1.00: BMDMA stat 0x25
[  142.408740] ata1.00: failed command: READ DMA EXT
[  142.408746] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.408747]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.408750] ata1.00: status: { DRDY ERR }
[  142.408752] ata1.00: error: { ABRT }
[  142.424388] ata1.00: configured for UDMA/133
[  142.424406] ata1: EH complete
[  142.424607] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.424611] ata1.00: BMDMA stat 0x25
[  142.424614] ata1.00: failed command: READ DMA EXT
[  142.424620] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.424622]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.424624] ata1.00: status: { DRDY ERR }
[  142.424626] ata1.00: error: { ABRT }
[  142.440436] ata1.00: configured for UDMA/133
[  142.440456] ata1: EH complete
[  142.440662] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.440666] ata1.00: BMDMA stat 0x25
[  142.440669] ata1.00: failed command: READ DMA EXT
[  142.440675] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.440677]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.440680] ata1.00: status: { DRDY ERR }
[  142.440682] ata1.00: error: { ABRT }
[  142.465444] ata1.00: configured for UDMA/133
[  142.465460] ata1: EH complete
[  142.466376] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.466380] ata1.00: BMDMA stat 0x25
[  142.466384] ata1.00: failed command: READ DMA EXT
[  142.466390] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.466391]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.466394] ata1.00: status: { DRDY ERR }
[  142.466396] ata1.00: error: { ABRT }
[  142.480404] ata1.00: configured for UDMA/133
[  142.480417] ata1: EH complete
[  142.480605] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.480609] ata1.00: BMDMA stat 0x25
[  142.480612] ata1.00: failed command: READ DMA EXT
[  142.480618] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.480620]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.480622] ata1.00: status: { DRDY ERR }
[  142.480624] ata1.00: error: { ABRT }
[  142.496372] ata1.00: configured for UDMA/133
[  142.496391] ata1: EH complete
[  142.496562] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.496566] ata1.00: BMDMA stat 0x25
[  142.496569] ata1.00: failed command: READ DMA EXT
[  142.496575] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.496576]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.496579] ata1.00: status: { DRDY ERR }
[  142.496581] ata1.00: error: { ABRT }
[  142.512373] ata1.00: configured for UDMA/133
[  142.512390] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  142.512394] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  142.512398] Descriptor sense data with sense descriptors (in hex):
[  142.512400]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  142.512408]         12 a1 9e a8 
[  142.512411] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  142.512415] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[  142.512423] end_request: I/O error, dev sda, sector 312581800
[  142.512441] ata1: EH complete
[  142.512658] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.512661] ata1.00: BMDMA stat 0x25
[  142.512664] ata1.00: failed command: READ DMA EXT
[  142.512670] ata1.00: cmd 25/00:08:70:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.512671]          res 51/04:08:70:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.512674] ata1.00: status: { DRDY ERR }
[  142.512676] ata1.00: error: { ABRT }
[  142.528411] ata1.00: configured for UDMA/133
[  142.528426] ata1: EH complete
[  142.528595] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.528598] ata1.00: BMDMA stat 0x25
[  142.528602] ata1.00: failed command: READ DMA EXT
[  142.528608] ata1.00: cmd 25/00:08:70:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.528609]          res 51/04:08:70:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.528612] ata1.00: status: { DRDY ERR }
[  142.528614] ata1.00: error: { ABRT }
[  142.544421] ata1.00: configured for UDMA/133
[  142.544440] ata1: EH complete
[  142.544611] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.544615] ata1.00: BMDMA stat 0x25
[  142.544618] ata1.00: failed command: READ DMA EXT
[  142.544624] ata1.00: cmd 25/00:08:70:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.544626]          res 51/04:08:70:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.544628] ata1.00: status: { DRDY ERR }
[  142.544631] ata1.00: error: { ABRT }
[  142.562284] ata1.00: configured for UDMA/133
[  142.562302] ata1: EH complete
[  142.564556] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.564561] ata1.00: BMDMA stat 0x25
[  142.564565] ata1.00: failed command: READ DMA EXT
[  142.564571] ata1.00: cmd 25/00:08:70:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.564573]          res 51/04:08:70:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.564576] ata1.00: status: { DRDY ERR }
[  142.564578] ata1.00: error: { ABRT }
[  142.580390] ata1.00: configured for UDMA/133
[  142.580408] ata1: EH complete
[  142.580576] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.580580] ata1.00: BMDMA stat 0x25
[  142.580583] ata1.00: failed command: READ DMA EXT
[  142.580589] ata1.00: cmd 25/00:08:70:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.580590]          res 51/04:08:70:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.580593] ata1.00: status: { DRDY ERR }
[  142.580595] ata1.00: error: { ABRT }
[  142.596389] ata1.00: configured for UDMA/133
[  142.596408] ata1: EH complete
[  142.596573] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.596577] ata1.00: BMDMA stat 0x25
[  142.596581] ata1.00: failed command: READ DMA EXT
[  142.596587] ata1.00: cmd 25/00:08:70:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.596588]          res 51/04:08:70:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.596591] ata1.00: status: { DRDY ERR }
[  142.596593] ata1.00: error: { ABRT }
[  142.613085] ata1.00: configured for UDMA/133
[  142.613104] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  142.613107] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  142.613111] Descriptor sense data with sense descriptors (in hex):
[  142.613113]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  142.613121]         12 a1 9e 70 
[  142.613125] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  142.613129] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e 70 00 00 08 00
[  142.613137] end_request: I/O error, dev sda, sector 312581744
[  142.613156] ata1: EH complete
[  142.619010] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.619015] ata1.00: BMDMA stat 0x25
[  142.619018] ata1.00: failed command: READ DMA EXT
[  142.619025] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.619026]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.619029] ata1.00: status: { DRDY ERR }
[  142.619031] ata1.00: error: { ABRT }
[  142.632387] ata1.00: configured for UDMA/133
[  142.632405] ata1: EH complete
[  142.632576] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.632580] ata1.00: BMDMA stat 0x25
[  142.632583] ata1.00: failed command: READ DMA EXT
[  142.632589] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.632591]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.632593] ata1.00: status: { DRDY ERR }
[  142.632595] ata1.00: error: { ABRT }
[  142.648384] ata1.00: configured for UDMA/133
[  142.648402] ata1: EH complete
[  142.648612] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.648616] ata1.00: BMDMA stat 0x25
[  142.648619] ata1.00: failed command: READ DMA EXT
[  142.648625] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.648627]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.648630] ata1.00: status: { DRDY ERR }
[  142.648632] ata1.00: error: { ABRT }
[  142.664616] ata1.00: configured for UDMA/133
[  142.664634] ata1: EH complete
[  142.664833] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.664836] ata1.00: BMDMA stat 0x25
[  142.664840] ata1.00: failed command: READ DMA EXT
[  142.664846] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.664847]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.664850] ata1.00: status: { DRDY ERR }
[  142.664852] ata1.00: error: { ABRT }
[  142.680387] ata1.00: configured for UDMA/133
[  142.680406] ata1: EH complete
[  142.680579] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.680583] ata1.00: BMDMA stat 0x25
[  142.680587] ata1.00: failed command: READ DMA EXT
[  142.680593] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.680594]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.680597] ata1.00: status: { DRDY ERR }
[  142.680599] ata1.00: error: { ABRT }
[  142.696375] ata1.00: configured for UDMA/133
[  142.696392] ata1: EH complete
[  142.696559] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.696562] ata1.00: BMDMA stat 0x25
[  142.696566] ata1.00: failed command: READ DMA EXT
[  142.696572] ata1.00: cmd 25/00:08:a0:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.696573]          res 51/04:08:a0:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.696576] ata1.00: status: { DRDY ERR }
[  142.696578] ata1.00: error: { ABRT }
[  142.712406] ata1.00: configured for UDMA/133
[  142.712423] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  142.712427] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  142.712431] Descriptor sense data with sense descriptors (in hex):
[  142.712433]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  142.712441]         12 a1 9e a0 
[  142.712444] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  142.712449] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a0 00 00 08 00
[  142.712457] end_request: I/O error, dev sda, sector 312581792
[  142.712477] ata1: EH complete
[  142.712700] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.712703] ata1.00: BMDMA stat 0x25
[  142.712706] ata1.00: failed command: READ DMA
[  142.712712] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.712714]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.712717] ata1.00: status: { DRDY ERR }
[  142.712719] ata1.00: error: { ABRT }
[  142.728362] ata1.00: configured for UDMA/133
[  142.728380] ata1: EH complete
[  142.728534] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.728538] ata1.00: BMDMA stat 0x25
[  142.728542] ata1.00: failed command: READ DMA
[  142.728548] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.728549]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.728552] ata1.00: status: { DRDY ERR }
[  142.728554] ata1.00: error: { ABRT }
[  142.744466] ata1.00: configured for UDMA/133
[  142.744481] ata1: EH complete
[  142.744656] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.744660] ata1.00: BMDMA stat 0x25
[  142.744663] ata1.00: failed command: READ DMA
[  142.744669] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.744671]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.744673] ata1.00: status: { DRDY ERR }
[  142.744675] ata1.00: error: { ABRT }
[  142.760692] ata1.00: configured for UDMA/133
[  142.760705] ata1: EH complete
[  142.760854] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.760857] ata1.00: BMDMA stat 0x25
[  142.760861] ata1.00: failed command: READ DMA
[  142.760867] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.760868]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.760871] ata1.00: status: { DRDY ERR }
[  142.760873] ata1.00: error: { ABRT }
[  142.776428] ata1.00: configured for UDMA/133
[  142.776443] ata1: EH complete
[  142.776597] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.776600] ata1.00: BMDMA stat 0x25
[  142.776604] ata1.00: failed command: READ DMA
[  142.776610] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.776611]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.776614] ata1.00: status: { DRDY ERR }
[  142.776616] ata1.00: error: { ABRT }
[  142.792381] ata1.00: configured for UDMA/133
[  142.792399] ata1: EH complete
[  142.792554] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.792557] ata1.00: BMDMA stat 0x25
[  142.792561] ata1.00: failed command: READ DMA
[  142.792567] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.792568]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.792571] ata1.00: status: { DRDY ERR }
[  142.792573] ata1.00: error: { ABRT }
[  142.808467] ata1.00: configured for UDMA/133
[  142.808487] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  142.808490] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  142.808494] Descriptor sense data with sense descriptors (in hex):
[  142.808496]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  142.808504]         00 00 00 08 
[  142.808508] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  142.808512] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 08 00 00 08 00
[  142.808520] end_request: I/O error, dev sda, sector 8
[  142.808539] ata1: EH complete
[  142.808843] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.808846] ata1.00: BMDMA stat 0x25
[  142.808849] ata1.00: failed command: READ DMA
[  142.808855] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.808856]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.808859] ata1.00: status: { DRDY ERR }
[  142.808861] ata1.00: error: { ABRT }
[  142.832367] ata1.00: configured for UDMA/133
[  142.832385] ata1: EH complete
[  142.832541] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.832545] ata1.00: BMDMA stat 0x25
[  142.832548] ata1.00: failed command: READ DMA
[  142.832554] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.832556]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.832558] ata1.00: status: { DRDY ERR }
[  142.832560] ata1.00: error: { ABRT }
[  142.848376] ata1.00: configured for UDMA/133
[  142.848394] ata1: EH complete
[  142.848548] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.848551] ata1.00: BMDMA stat 0x25
[  142.848555] ata1.00: failed command: READ DMA
[  142.848561] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.848562]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.848565] ata1.00: status: { DRDY ERR }
[  142.848567] ata1.00: error: { ABRT }
[  142.864391] ata1.00: configured for UDMA/133
[  142.864408] ata1: EH complete
[  142.864568] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.864571] ata1.00: BMDMA stat 0x25
[  142.864575] ata1.00: failed command: READ DMA
[  142.864581] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.864582]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.864585] ata1.00: status: { DRDY ERR }
[  142.864587] ata1.00: error: { ABRT }
[  142.880412] ata1.00: configured for UDMA/133
[  142.880430] ata1: EH complete
[  142.880606] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.880609] ata1.00: BMDMA stat 0x25
[  142.880613] ata1.00: failed command: READ DMA
[  142.880619] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.880620]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.880623] ata1.00: status: { DRDY ERR }
[  142.880625] ata1.00: error: { ABRT }
[  142.896373] ata1.00: configured for UDMA/133
[  142.896391] ata1: EH complete
[  142.896548] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.896552] ata1.00: BMDMA stat 0x25
[  142.896555] ata1.00: failed command: READ DMA
[  142.896561] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[  142.896563]          res 51/04:08:08:00:00/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.896565] ata1.00: status: { DRDY ERR }
[  142.896567] ata1.00: error: { ABRT }
[  142.912377] ata1.00: configured for UDMA/133
[  142.912395] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  142.912399] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  142.912403] Descriptor sense data with sense descriptors (in hex):
[  142.912405]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  142.912413]         00 00 00 08 
[  142.912416] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  142.912421] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 08 00 00 08 00
[  142.912428] end_request: I/O error, dev sda, sector 8
[  142.912448] ata1: EH complete
[  142.912659] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.912662] ata1.00: BMDMA stat 0x25
[  142.912666] ata1.00: failed command: READ DMA EXT
[  142.912672] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.912673]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.912676] ata1.00: status: { DRDY ERR }
[  142.912678] ata1.00: error: { ABRT }
[  142.929756] ata1.00: configured for UDMA/133
[  142.929775] ata1: EH complete
[  142.930457] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.930461] ata1.00: BMDMA stat 0x25
[  142.930465] ata1.00: failed command: READ DMA EXT
[  142.930471] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.930472]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.930475] ata1.00: status: { DRDY ERR }
[  142.930477] ata1.00: error: { ABRT }
[  142.938511] ata1.00: configured for UDMA/133
[  142.938529] ata1: EH complete
[  142.939978] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.939982] ata1.00: BMDMA stat 0x25
[  142.939987] ata1.00: failed command: READ DMA EXT
[  142.939992] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.939994]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.940037] ata1.00: status: { DRDY ERR }
[  142.940048] ata1.00: error: { ABRT }
[  142.956374] ata1.00: configured for UDMA/133
[  142.956393] ata1: EH complete
[  142.956559] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.956562] ata1.00: BMDMA stat 0x25
[  142.956566] ata1.00: failed command: READ DMA EXT
[  142.956572] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.956573]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.956576] ata1.00: status: { DRDY ERR }
[  142.956578] ata1.00: error: { ABRT }
[  142.972399] ata1.00: configured for UDMA/133
[  142.972417] ata1: EH complete
[  142.972588] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.972592] ata1.00: BMDMA stat 0x25
[  142.972595] ata1.00: failed command: READ DMA EXT
[  142.972601] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.972603]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.972606] ata1.00: status: { DRDY ERR }
[  142.972608] ata1.00: error: { ABRT }
[  142.988425] ata1.00: configured for UDMA/133
[  142.988439] ata1: EH complete
[  142.988610] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  142.988614] ata1.00: BMDMA stat 0x25
[  142.988618] ata1.00: failed command: READ DMA EXT
[  142.988624] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  142.988625]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  142.988628] ata1.00: status: { DRDY ERR }
[  142.988630] ata1.00: error: { ABRT }
[  143.004442] ata1.00: configured for UDMA/133
[  143.004459] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  143.004463] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  143.004467] Descriptor sense data with sense descriptors (in hex):
[  143.004469]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  143.004477]         12 a1 9e a8 
[  143.004481] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[  143.004485] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[  143.004493] end_request: I/O error, dev sda, sector 312581800
[  143.004511] ata1: EH complete
[  143.004728] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  143.004730] ata1.00: BMDMA stat 0x25
[  143.004734] ata1.00: failed command: READ DMA EXT
[  143.004740] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  143.004741]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  143.004744] ata1.00: status: { DRDY ERR }
[  143.004746] ata1.00: error: { ABRT }
[  143.020405] ata1.00: configured for UDMA/133
[  143.020425] ata1: EH complete
[  143.020632] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  143.020636] ata1.00: BMDMA stat 0x25
[  143.020639] ata1.00: failed command: READ DMA EXT
[  143.020646] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  143.020647]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  143.020650] ata1.00: status: { DRDY ERR }
[  143.020652] ata1.00: error: { ABRT }
[  143.036435] ata1.00: configured for UDMA/133
[  143.036447] ata1: EH complete
[  143.036616] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  143.036620] ata1.00: BMDMA stat 0x25
[  143.036623] ata1.00: failed command: READ DMA EXT
[  143.036630] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  143.036631]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  143.036634] ata1.00: status: { DRDY ERR }
[  143.036636] ata1.00: error: { ABRT }
[  143.052628] ata1.00: configured for UDMA/133
[  143.052640] ata1: EH complete
[  143.052823] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  143.052826] ata1.00: BMDMA stat 0x25
[  143.052830] ata1.00: failed command: READ DMA EXT
[  143.052836] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  143.052837]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  143.052840] ata1.00: status: { DRDY ERR }
[  143.052842] ata1.00: error: { ABRT }
[  143.068406] ata1.00: configured for UDMA/133
[  143.068423] ata1: EH complete
[  143.068584] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  143.068588] ata1.00: BMDMA stat 0x25
[  143.068591] ata1.00: failed command: READ DMA EXT
[  143.068597] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  143.068599]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  143.068602] ata1.00: status: { DRDY ERR }
[  143.068604] ata1.00: error: { ABRT }
[  143.084404] ata1.00: configured for UDMA/133
[  143.084422] ata1: EH complete
[  143.084593] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  143.084596] ata1.00: BMDMA stat 0x25
[  143.084600] ata1.00: failed command: READ DMA EXT
[  143.084606] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[  143.084607]          res 51/04:08:a8:9e:a1/04:00:12:00:00/e0 Emask 0x1 (device error)
[  143.084610] ata1.00: status: { DRDY ERR }
[  143.084612] ata1.00: error: { ABRT }