[    19.328] 
X.Org X Server 1.9.0
Release Date: 2010-08-20
[    19.328] X Protocol Version 11, Revision 0
[    19.328] Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
[    19.328] Current Operating System: Linux Linux420 2.6.35-28-generic #49-Ubuntu SMP Tue Mar 1 14:39:03 UTC 2011 x86_64
[    19.328] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=a3b5d371-2336-4424-823e-507a70d7c85c ro quiet splash
[    19.328] Build Date: 09 January 2011  12:14:27PM
[    19.328] xorg-server 2:1.9.0-0ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) 
[    19.328] Current version of pixman: 0.18.4
[    19.328] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    19.328] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.329] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 27 22:12:52 2011
[    19.329] (==) Using config file: "/etc/X11/xorg.conf"
[    19.329] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.329] (==) ServerLayout "amdcccle Layout"
[    19.329] (**) |-->Screen "amdcccle-Screen[1]-0" (0)
[    19.329] (**) |   |-->Monitor "<default monitor>"
[    19.329] (**) |   |-->Device "amdcccle-Device[1]-0"
[    19.329] (==) No monitor specified for screen "amdcccle-Screen[1]-0".
	Using a default monitor configuration.
[    19.329] (**) |-->Screen "amdcccle-Screen[3]-0" (1)
[    19.329] (**) |   |-->Monitor "<default monitor>"
[    19.329] (**) |   |-->Device "amdcccle-Device[3]-0"
[    19.329] (==) No monitor specified for screen "amdcccle-Screen[3]-0".
	Using a default monitor configuration.
[    19.329] (**) |-->Screen "amdcccle-Screen[3]-1" (2)
[    19.329] (**) |   |-->Monitor "<default monitor>"
[    19.330] (**) |   |-->Device "amdcccle-Device[3]-1"
[    19.330] (==) No monitor specified for screen "amdcccle-Screen[3]-1".
	Using a default monitor configuration.
[    19.330] (**) Option "Xinerama" "on"
[    19.330] (==) Automatically adding devices
[    19.330] (==) Automatically enabling devices
[    19.330] (**) Xinerama: enabled
[    19.330] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    19.330] 	Entry deleted from font path.
[    19.330] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
[    19.330] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    19.330] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    19.330] (II) Loader magic: 0x7d17a0
[    19.330] (II) Module ABI versions:
[    19.330] 	X.Org ANSI C Emulation: 0.4
[    19.330] 	X.Org Video Driver: 8.0
[    19.330] 	X.Org XInput driver : 11.0
[    19.330] 	X.Org Server Extension : 4.0
[    19.331] (--) PCI:*(0:1:0:0) 1002:6899:1002:0b00 rev 0, Mem @ 0xc0000000/268435456, 0xfe9e0000/131072, I/O @ 0x0000dc00/256, BIOS @ 0x????????/131072
[    19.331] (--) PCI: (0:3:0:0) 1002:95cf:1002:2143 rev 0, Mem @ 0xd0000000/268435456, 0xfe7f0000/65536, I/O @ 0x0000cc00/256, BIOS @ 0x????????/131072
[    19.331] (II) Open ACPI successful (/var/run/acpid.socket)
[    19.331] (II) "extmod" will be loaded by default.
[    19.331] (II) "dbe" will be loaded by default.
[    19.331] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    19.331] (II) "record" will be loaded by default.
[    19.331] (II) "dri" will be loaded by default.
[    19.331] (II) "dri2" will be loaded by default.
[    19.331] (II) LoadModule: "glx"
[    19.331] (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
[    19.332] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[    19.332] 	compiled for 7.6.0, module version = 1.0.0
[    19.332] (II) Loading extension GLX
[    19.332] (II) LoadModule: "extmod"
[    19.342] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    19.342] (II) Module extmod: vendor="X.Org Foundation"
[    19.342] 	compiled for 1.9.0, module version = 1.0.0
[    19.342] 	Module class: X.Org Server Extension
[    19.342] 	ABI class: X.Org Server Extension, version 4.0
[    19.342] (II) Loading extension MIT-SCREEN-SAVER
[    19.342] (II) Loading extension XFree86-VidModeExtension
[    19.342] (II) Loading extension XFree86-DGA
[    19.342] (II) Loading extension DPMS
[    19.342] (II) Loading extension XVideo
[    19.342] (II) Loading extension XVideo-MotionCompensation
[    19.342] (II) Loading extension X-Resource
[    19.342] (II) LoadModule: "dbe"
[    19.342] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    19.342] (II) Module dbe: vendor="X.Org Foundation"
[    19.342] 	compiled for 1.9.0, module version = 1.0.0
[    19.342] 	Module class: X.Org Server Extension
[    19.342] 	ABI class: X.Org Server Extension, version 4.0
[    19.342] (II) Loading extension DOUBLE-BUFFER
[    19.342] (II) LoadModule: "record"
[    19.342] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    19.342] (II) Module record: vendor="X.Org Foundation"
[    19.342] 	compiled for 1.9.0, module version = 1.13.0
[    19.342] 	Module class: X.Org Server Extension
[    19.342] 	ABI class: X.Org Server Extension, version 4.0
[    19.342] (II) Loading extension RECORD
[    19.342] (II) LoadModule: "dri"
[    19.343] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    19.343] (II) Module dri: vendor="X.Org Foundation"
[    19.343] 	compiled for 1.9.0, module version = 1.0.0
[    19.343] 	ABI class: X.Org Server Extension, version 4.0
[    19.343] (II) Loading extension XFree86-DRI
[    19.343] (II) LoadModule: "dri2"
[    19.343] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    19.365] (II) Module dri2: vendor="X.Org Foundation"
[    19.365] 	compiled for 1.9.0, module version = 1.2.0
[    19.365] 	ABI class: X.Org Server Extension, version 4.0
[    19.365] (II) Loading extension DRI2
[    19.365] (II) LoadModule: "fglrx"
[    19.365] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
[    19.379] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    19.379] 	compiled for 1.4.99.906, module version = 8.78.30
[    19.379] 	Module class: X.Org Video Driver
[    19.380] (II) Loading sub module "fglrxdrm"
[    19.380] (II) LoadModule: "fglrxdrm"
[    19.380] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[    19.380] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    19.380] 	compiled for 1.8.99.905, module version = 8.78.30
[    19.380] (II) ATI Proprietary Linux Driver Version Identifier:8.78.30
[    19.380] (II) ATI Proprietary Linux Driver Release Identifier: 8.78.3                               
[    19.380] (II) ATI Proprietary Linux Driver Build Date: Sep 20 2010 21:31:08
[    19.380] (++) using VT number 7

[    19.381] (WW) Falling back to old probe method for fglrx
[    19.384] (II) Loading PCS database from /etc/ati/amdpcsdb
[    19.384] (--) Chipset Supported AMD Graphics Processor (0x6899) found
[    19.384] (--) Chipset Supported AMD Graphics Processor (0x95CF) found
[    19.384] (--) Chipset Supported AMD Graphics Processor (0x95CF) found
[    19.385] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    19.385] (WW) fglrx: No matching Device section for instance (BusID PCI:0@3:0:1) found
[    19.385] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    19.385] (II) AMD Video driver is signed
[    19.385] (II) fglrx(0): pEnt->device->identifier=0x19f9090
[    19.385] (II) fglrx(1): pEnt->device->identifier=0x19f9480
[    19.385] (II) fglrx(2): pEnt->device->identifier=0x19f9480
[    19.385] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[    19.386] (II) Loading sub module "vgahw"
[    19.386] (II) LoadModule: "vgahw"
[    20.174] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    20.174] (II) Module vgahw: vendor="X.Org Foundation"
[    20.174] 	compiled for 1.9.0, module version = 0.1.0
[    20.174] 	ABI class: X.Org Video Driver, version 8.0
[    20.174] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    20.174] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    20.174] (==) fglrx(0): Default visual is TrueColor
[    20.174] (==) fglrx(0): RGB weight 888
[    20.174] (II) fglrx(0): Using 8 bits per RGB 
[    20.174] (==) fglrx(0): Buffer Tiling is ON
[    20.174] (II) Loading sub module "fglrxdrm"
[    20.174] (II) LoadModule: "fglrxdrm"
[    20.175] (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[    20.176] ukiDynamicMajor: found major device number 249
[    20.176] ukiDynamicMajor: found major device number 249
[    20.176] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    20.176] ukiOpenDevice: node name is /dev/ati/card0
[    20.176] ukiOpenDevice: open result is 14, (OK)
[    20.176] ukiOpenByBusid: ukiOpenMinor returns 14
[    20.176] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    20.177] (==) fglrx(0): NoAccel = NO
[    20.177] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[    20.177] (--) fglrx(0): Chipset: "ATI Radeon HD 5800 Series " (Chipset = 0x6899)
[    20.177] (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0b00)
[    20.177] (==) fglrx(0): board vendor info: original ATI graphics adapter
[    20.177] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    20.177] (--) fglrx(0): MMIO registers at 0xfe9e0000
[    20.177] (--) fglrx(0): I/O port at 0x0000dc00
[    20.177] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    20.197] (II) fglrx(0): AC Adapter is used
[    20.199] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    20.278] (II) Loading sub module "vbe"
[    20.278] (II) LoadModule: "vbe"
[    20.278] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    20.278] (II) Module vbe: vendor="X.Org Foundation"
[    20.278] 	compiled for 1.9.0, module version = 1.1.0
[    20.278] 	ABI class: X.Org Video Driver, version 8.0
[    20.279] (II) fglrx(0): VESA BIOS detected
[    20.279] (II) fglrx(0): VESA VBE Version 3.0
[    20.279] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    20.279] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    20.279] (II) fglrx(0): VESA VBE OEM Software Rev: 12.14
[    20.279] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    20.279] (II) fglrx(0): VESA VBE OEM Product: CYPRESS
[    20.279] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    20.319] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    20.319] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[    20.319] (II) fglrx(0): PCIE card detected
[    20.319] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    20.319] (II) fglrx(0): board/chipset is supported by this driver (original ATI board)
[    20.321] (II) fglrx(0): Using adapter: 1:0.0.
[    20.353] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    20.370] (II) fglrx(0): Interrupt handler installed at IRQ 48.
[    20.370] (II) fglrx(0): RandR 1.2 support is enabled!
[    20.370] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    20.370] (==) fglrx(0): Center Mode is disabled 
[    20.370] (II) Loading sub module "fb"
[    20.370] (II) LoadModule: "fb"
[    20.371] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.371] (II) Module fb: vendor="X.Org Foundation"
[    20.371] 	compiled for 1.9.0, module version = 1.0.0
[    20.371] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.371] (==) fglrx(0): Active stereo disabled
[    20.371] (II) Loading sub module "ddc"
[    20.371] (II) LoadModule: "ddc"
[    20.371] (II) Module "ddc" already built-in
[    20.611] (II) fglrx(0): Finished Initialize PPLIB!
[    20.612] (II) fglrx(0): Output DFP1 has no monitor section
[    20.612] (II) fglrx(0): Output DFP2 has no monitor section
[    20.612] (II) fglrx(0): Output DFP3 using monitor section 0-DFP3
[    20.612] (**) fglrx(0): Option "PreferredMode" "1920x1080"
[    20.612] (**) fglrx(0): Option "Position" "1920 0"
[    20.612] (**) fglrx(0): Option "Disable" "false"
[    20.612] (**) fglrx(0): Option "Rotate" "normal"
[    20.612] (**) fglrx(0): Option "TargetRefresh" "60"
[    20.612] (II) fglrx(0): Output DFP4 using monitor section 0-DFP4
[    20.612] (**) fglrx(0): Option "PreferredMode" "1920x1080"
[    20.612] (**) fglrx(0): Option "Position" "0 0"
[    20.612] (**) fglrx(0): Option "Disable" "false"
[    20.612] (**) fglrx(0): Option "Rotate" "normal"
[    20.612] (**) fglrx(0): Option "TargetRefresh" "60"
[    20.612] (II) fglrx(0): Output CRT1 has no monitor section
[    20.612] (II) fglrx(0): Output CRT2 has no monitor section
[    20.612] (II) Loading sub module "ddc"
[    20.612] (II) LoadModule: "ddc"
[    20.612] (II) Module "ddc" already built-in
[    20.612] (II) fglrx(0): Connected Display0: DFP3
[    20.612] (II) fglrx(0): Display0 EDID data ---------------------------
[    20.612] (II) fglrx(0): Manufacturer: ACI  Model: 24f3  Serial#: 58026
[    20.612] (II) fglrx(0): Year: 2009  Week: 46
[    20.612] (II) fglrx(0): EDID Version: 1.3
[    20.612] (II) fglrx(0): Digital Display Input
[    20.612] (II) fglrx(0): Max Image Size [cm]: horiz.: 52  vert.: 29
[    20.612] (II) fglrx(0): Gamma: 2.20
[    20.612] (II) fglrx(0): DPMS capabilities: Off
[    20.612] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    20.612] (II) fglrx(0): First detailed timing is preferred mode
[    20.612] (II) fglrx(0): redX: 0.644 redY: 0.332   greenX: 0.286 greenY: 0.601
[    20.612] (II) fglrx(0): blueX: 0.152 blueY: 0.076   whiteX: 0.312 whiteY: 0.328
[    20.612] (II) fglrx(0): Supported established timings:
[    20.612] (II) fglrx(0): 720x400@70Hz
[    20.612] (II) fglrx(0): 640x480@60Hz
[    20.612] (II) fglrx(0): 640x480@67Hz
[    20.612] (II) fglrx(0): 640x480@72Hz
[    20.612] (II) fglrx(0): 640x480@75Hz
[    20.612] (II) fglrx(0): 800x600@56Hz
[    20.612] (II) fglrx(0): 800x600@60Hz
[    20.612] (II) fglrx(0): 800x600@72Hz
[    20.612] (II) fglrx(0): 800x600@75Hz
[    20.612] (II) fglrx(0): 832x624@75Hz
[    20.612] (II) fglrx(0): 1024x768@60Hz
[    20.612] (II) fglrx(0): 1024x768@70Hz
[    20.612] (II) fglrx(0): 1024x768@75Hz
[    20.612] (II) fglrx(0): 1280x1024@75Hz
[    20.612] (II) fglrx(0): Manufacturer's mask: 0
[    20.612] (II) fglrx(0): Supported standard timings:
[    20.612] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    20.612] (II) fglrx(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    20.612] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    20.612] (II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    20.612] (II) fglrx(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    20.612] (II) fglrx(0): #5: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    20.613] (II) fglrx(0): Supported detailed timing:
[    20.613] (II) fglrx(0): clock: 148.5 MHz   Image Size:  521 x 293 mm
[    20.613] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    20.613] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    20.613] (II) fglrx(0): Serial No: 9BLMTF058026
[    20.613] (II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 85 kHz, PixClock max 165 MHz
[    20.613] (II) fglrx(0): Monitor name: ASUS VH242H
[    20.613] (II) fglrx(0): EDID (in hex):
[    20.613] (II) fglrx(0): 	00ffffffffffff000469f324aae20000
[    20.613] (II) fglrx(0): 	2e13010380341d782ac720a455499927
[    20.613] (II) fglrx(0): 	135054bfef00714f814081809500b300
[    20.613] (II) fglrx(0): 	d1c001010101023a801871382d40582c
[    20.613] (II) fglrx(0): 	450009252100001e000000ff0039424c
[    20.613] (II) fglrx(0): 	4d54463035383032360a000000fd0037
[    20.613] (II) fglrx(0): 	4b1e5510000a202020202020000000fc
[    20.613] (II) fglrx(0): 	0041535553205648323432480a2000b9
[    20.613] (II) fglrx(0): End of Display0 EDID data --------------------
[    20.613] (II) fglrx(0): Connected Display1: DFP4
[    20.613] (II) fglrx(0): Display1 EDID data ---------------------------
[    20.613] (II) fglrx(0): Manufacturer: EMA  Model: 183  Serial#: 26234678
[    20.613] (II) fglrx(0): Year: 2010  Week: 19
[    20.613] (II) fglrx(0): EDID Version: 1.3
[    20.613] (II) fglrx(0): Digital Display Input
[    20.613] (II) fglrx(0): Max Image Size [cm]: horiz.: 51  vert.: 28
[    20.613] (II) fglrx(0): Gamma: 2.20
[    20.613] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    20.613] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    20.613] (II) fglrx(0): First detailed timing is preferred mode
[    20.613] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    20.613] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    20.613] (II) fglrx(0): Supported established timings:
[    20.613] (II) fglrx(0): 720x400@70Hz
[    20.613] (II) fglrx(0): 640x480@60Hz
[    20.613] (II) fglrx(0): 640x480@67Hz
[    20.613] (II) fglrx(0): 800x600@56Hz
[    20.613] (II) fglrx(0): 800x600@60Hz
[    20.613] (II) fglrx(0): 1024x768@60Hz
[    20.613] (II) fglrx(0): 1024x768@70Hz
[    20.613] (II) fglrx(0): Manufacturer's mask: 0
[    20.613] (II) fglrx(0): Supported standard timings:
[    20.613] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    20.613] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    20.613] (II) fglrx(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    20.613] (II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    20.613] (II) fglrx(0): Supported detailed timing:
[    20.613] (II) fglrx(0): clock: 148.5 MHz   Image Size:  509 x 286 mm
[    20.613] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    20.613] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    20.613] (II) fglrx(0): Monitor name: E233H
[    20.613] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz
[    20.613] (II) fglrx(0): Serial No: Q360C0144020
[    20.613] (II) fglrx(0): EDID (in hex):
[    20.613] (II) fglrx(0): 	00ffffffffffff0015a18301364f9001
[    20.613] (II) fglrx(0): 	1314010380331c78eaee95a3544c9926
[    20.613] (II) fglrx(0): 	0f5054b30c00714f8180810095000101
[    20.613] (II) fglrx(0): 	010101010101023a801871382d40582c
[    20.613] (II) fglrx(0): 	4500fd1e1100001e000000fc00453233
[    20.613] (II) fglrx(0): 	33480a20202020202020000000fd0038
[    20.613] (II) fglrx(0): 	4c1f5312000a202020202020000000ff
[    20.613] (II) fglrx(0): 	005133363043303134343032300a001c
[    20.613] (II) fglrx(0): End of Display1 EDID data --------------------
[    20.638] (II) fglrx(0): Output DFP1 disconnected
[    20.638] (II) fglrx(0): Output DFP2 disconnected
[    20.638] (II) fglrx(0): Output DFP3 connected
[    20.638] (II) fglrx(0): Output DFP4 connected
[    20.638] (II) fglrx(0): Output CRT1 disconnected
[    20.638] (II) fglrx(0): Output CRT2 disconnected
[    20.638] (II) fglrx(0): Using user preference for initial modes
[    20.638] (II) fglrx(0): Output DFP3 using initial mode 1920x1080
[    20.638] (II) fglrx(0): Output DFP4 using initial mode 1920x1080
[    20.638] (II) fglrx(0): DPI set to (96, 96)
[    20.638] (II) fglrx(0): Eyefinity capable adapter detected.
[    20.638] (II) fglrx(0): Adapter ATI Radeon HD 5800 Series  has 3 configurable heads and 2 displays connected.
[    20.638] (==) fglrx(0):  PseudoColor visuals disabled
[    20.638] (II) Loading sub module "ramdac"
[    20.638] (II) LoadModule: "ramdac"
[    20.638] (II) Module "ramdac" already built-in
[    20.638] (==) fglrx(0): NoDRI = NO
[    20.638] (==) fglrx(0): Capabilities: 0x00000000
[    20.638] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    20.638] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    20.638] (==) fglrx(0): UseFastTLS=0
[    20.638] (==) fglrx(0): BlockSignalsOnLock=1
[    20.638] (II) fglrx(1): === [xdl_x760_atiddxPreInit] === begin
[    20.638] (**) fglrx(1): Depth 24, (--) framebuffer bpp 32
[    20.638] (II) fglrx(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    20.638] (==) fglrx(1): Default visual is TrueColor
[    20.638] (==) fglrx(1): RGB weight 888
[    20.638] (II) fglrx(1): Using 8 bits per RGB 
[    20.638] (==) fglrx(1): Buffer Tiling is ON
[    20.638] (II) Loading sub module "fglrxdrm"
[    20.638] (II) LoadModule: "fglrxdrm"
[    20.638] (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[    20.640] ukiDynamicMajor: found major device number 249
[    20.640] ukiDynamicMajor: found major device number 249
[    20.640] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[    20.640] ukiOpenDevice: node name is /dev/ati/card0
[    20.640] ukiOpenDevice: open result is 19, (OK)
[    20.640] ukiOpenByBusid: ukiOpenMinor returns 19
[    20.640] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    20.640] ukiOpenDevice: node name is /dev/ati/card1
[    20.640] ukiOpenDevice: open result is 19, (OK)
[    20.640] ukiOpenByBusid: ukiOpenMinor returns 19
[    20.640] ukiOpenByBusid: ukiGetBusid reports PCI:3:0:0
[    20.641] (==) fglrx(1): NoAccel = NO
[    20.641] (==) fglrx(1): ATI 2D Acceleration Architecture enabled
[    20.641] (--) fglrx(1): Chipset: "ATI FirePro 2260" (Chipset = 0x95cf)
[    20.641] (--) fglrx(1): (PciSubVendor = 0x1002, PciSubDevice = 0x2143)
[    20.641] (==) fglrx(1): board vendor info: original ATI graphics adapter
[    20.641] (--) fglrx(1): Linear framebuffer (phys) at 0xd0000000
[    20.641] (--) fglrx(1): MMIO registers at 0xfe7f0000
[    20.641] (--) fglrx(1): I/O port at 0x0000cc00
[    20.641] (==) fglrx(1): ROM-BIOS at 0x000c0000
[    20.661] (II) fglrx(0): AC Adapter is used
[    20.666] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
[    20.787] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    20.787] (--) fglrx(1): Video RAM: 262144 kByte, Type: DDR2
[    20.787] (II) fglrx(1): PCIE card detected
[    20.787] (--) fglrx(1): Using per-process page tables (PPPT) as GART.
[    20.787] (II) fglrx(1): board/chipset is supported by this driver (original ATI board)
[    20.788] (II) fglrx(0): Using adapter: 3:0.0.
[    20.796] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[    20.874] (II) fglrx(0): Interrupt handler installed at IRQ 49.
[    20.874] (II) fglrx(1): RandR 1.2 support is enabled!
[    20.874] (II) fglrx(1): RandR 1.2 rotation support is enabled!
[    20.874] (==) fglrx(1): Center Mode is disabled 
[    20.874] (II) Loading sub module "fb"
[    20.874] (II) LoadModule: "fb"
[    20.874] (II) Reloading /usr/lib/xorg/modules/libfb.so
[    20.874] (==) fglrx(1): Active stereo disabled
[    20.874] (II) Loading sub module "ddc"
[    20.874] (II) LoadModule: "ddc"
[    20.874] (II) Module "ddc" already built-in
[    22.076] (WW) fglrx(0): Unable to register ADL handler for 0x00C00000
[    22.077] (II) fglrx(0): Finished Initialize PPLIB!
[    22.091] (II) fglrx(1): Output DFP1 has no monitor section
[    22.091] (II) fglrx(1): Output DFP2 using monitor section 1-DFP2
[    22.091] (**) fglrx(1): Option "PreferredMode" "1920x1080"
[    22.091] (**) fglrx(1): Option "Position" "0 0"
[    22.091] (**) fglrx(1): Option "Disable" "false"
[    22.091] (**) fglrx(1): Option "Rotate" "normal"
[    22.091] (**) fglrx(1): Option "TargetRefresh" "60"
[    22.091] (II) Loading sub module "ddc"
[    22.091] (II) LoadModule: "ddc"
[    22.091] (II) Module "ddc" already built-in
[    22.091] (II) fglrx(1): Connected Display0: DFP1
[    22.091] (II) fglrx(1): Display0 EDID data ---------------------------
[    22.091] (II) fglrx(1): Manufacturer: DEL  Model: 403c  Serial#: 909455699
[    22.091] (II) fglrx(1): Year: 2008  Week: 29
[    22.091] (II) fglrx(1): EDID Version: 1.3
[    22.091] (II) fglrx(1): Digital Display Input
[    22.092] (II) fglrx(1): Max Image Size [cm]: horiz.: 47  vert.: 30
[    22.092] (II) fglrx(1): Gamma: 2.20
[    22.092] (II) fglrx(1): DPMS capabilities: StandBy Suspend Off
[    22.092] (II) fglrx(1): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    22.092] (II) fglrx(1): First detailed timing is preferred mode
[    22.092] (II) fglrx(1): redX: 0.664 redY: 0.315   greenX: 0.217 greenY: 0.670
[    22.092] (II) fglrx(1): blueX: 0.144 blueY: 0.077   whiteX: 0.313 whiteY: 0.329
[    22.092] (II) fglrx(1): Supported established timings:
[    22.092] (II) fglrx(1): 720x400@70Hz
[    22.092] (II) fglrx(1): 640x480@60Hz
[    22.092] (II) fglrx(1): 640x480@75Hz
[    22.092] (II) fglrx(1): 800x600@60Hz
[    22.092] (II) fglrx(1): 800x600@75Hz
[    22.092] (II) fglrx(1): 1024x768@60Hz
[    22.092] (II) fglrx(1): 1024x768@75Hz
[    22.092] (II) fglrx(1): 1280x1024@75Hz
[    22.092] (II) fglrx(1): Manufacturer's mask: 0
[    22.092] (II) fglrx(1): Supported standard timings:
[    22.092] (II) fglrx(1): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    22.092] (II) fglrx(1): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    22.092] (II) fglrx(1): #2: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    22.092] (II) fglrx(1): Supported detailed timing:
[    22.092] (II) fglrx(1): clock: 146.2 MHz   Image Size:  473 x 296 mm
[    22.092] (II) fglrx(1): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
[    22.092] (II) fglrx(1): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
[    22.092] (II) fglrx(1): Serial No: F532H87I651S
[    22.092] (II) fglrx(1): Monitor name: DELL 2208WFP
[    22.092] (II) fglrx(1): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[    22.092] (II) fglrx(1): EDID (in hex):
[    22.092] (II) fglrx(1): 	00ffffffffffff0010ac3c4053313536
[    22.092] (II) fglrx(1): 	1d120103802f1e78ea3af5aa5037ab24
[    22.092] (II) fglrx(1): 	135054a54b00714f8180b30001010101
[    22.092] (II) fglrx(1): 	01010101010121399030621a274068b0
[    22.092] (II) fglrx(1): 	3600d9281100001c000000ff00463533
[    22.092] (II) fglrx(1): 	3248383749363531530a000000fc0044
[    22.092] (II) fglrx(1): 	454c4c20323230385746500a000000fd
[    22.092] (II) fglrx(1): 	00384c1e5310000a202020202020000c
[    22.092] (II) fglrx(1): End of Display0 EDID data --------------------
[    22.092] (II) fglrx(1): Connected Display1: DFP2
[    22.092] (II) fglrx(1): Display1 EDID data ---------------------------
[    22.092] (II) fglrx(1): Manufacturer: EMA  Model: 183  Serial#: 26234416
[    22.092] (II) fglrx(1): Year: 2010  Week: 19
[    22.092] (II) fglrx(1): EDID Version: 1.3
[    22.092] (II) fglrx(1): Digital Display Input
[    22.092] (II) fglrx(1): Max Image Size [cm]: horiz.: 51  vert.: 28
[    22.092] (II) fglrx(1): Gamma: 2.20
[    22.092] (II) fglrx(1): DPMS capabilities: StandBy Suspend Off
[    22.092] (II) fglrx(1): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    22.092] (II) fglrx(1): First detailed timing is preferred mode
[    22.092] (II) fglrx(1): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    22.092] (II) fglrx(1): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    22.092] (II) fglrx(1): Supported established timings:
[    22.092] (II) fglrx(1): 720x400@70Hz
[    22.092] (II) fglrx(1): 640x480@60Hz
[    22.092] (II) fglrx(1): 640x480@67Hz
[    22.092] (II) fglrx(1): 800x600@56Hz
[    22.092] (II) fglrx(1): 800x600@60Hz
[    22.092] (II) fglrx(1): 1024x768@60Hz
[    22.092] (II) fglrx(1): 1024x768@70Hz
[    22.092] (II) fglrx(1): Manufacturer's mask: 0
[    22.092] (II) fglrx(1): Supported standard timings:
[    22.092] (II) fglrx(1): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    22.092] (II) fglrx(1): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    22.092] (II) fglrx(1): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    22.092] (II) fglrx(1): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    22.092] (II) fglrx(1): Supported detailed timing:
[    22.092] (II) fglrx(1): clock: 148.5 MHz   Image Size:  509 x 286 mm
[    22.092] (II) fglrx(1): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    22.092] (II) fglrx(1): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    22.092] (II) fglrx(1): Monitor name: E233H
[    22.092] (II) fglrx(1): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz
[    22.092] (II) fglrx(1): Serial No: Q360C0144020
[    22.092] (II) fglrx(1): EDID (in hex):
[    22.092] (II) fglrx(1): 	00ffffffffffff0015a18301304e9001
[    22.092] (II) fglrx(1): 	1314010380331c78eaee95a3544c9926
[    22.092] (II) fglrx(1): 	0f5054b30c00714f8180810095000101
[    22.092] (II) fglrx(1): 	010101010101023a801871382d40582c
[    22.092] (II) fglrx(1): 	4500fd1e1100001e000000fc00453233
[    22.092] (II) fglrx(1): 	33480a20202020202020000000fd0038
[    22.092] (II) fglrx(1): 	4c1f5312000a202020202020000000ff
[    22.092] (II) fglrx(1): 	005133363043303134343032300a0023
[    22.092] (II) fglrx(1): End of Display1 EDID data --------------------
[    22.314] (II) fglrx(1): Output DFP1 disconnected
[    22.314] (II) fglrx(1): Output DFP2 connected
[    22.314] (II) fglrx(1): Using user preference for initial modes
[    22.314] (II) fglrx(1): Output DFP2 using initial mode 1920x1080
[    22.314] (II) fglrx(1): DPI set to (96, 96)
[    22.314] (WW) fglrx(0): Unable to register ADL handler for 0x00110000
[    22.314] (WW) fglrx(0): Unable to register ADL handler for 0x00120000
[    22.314] (WW) fglrx(0): Unable to register ADL handler for 0x00130000
[    22.314] (WW) fglrx(0): Unable to register ADL handler for 0x00150000
[    22.314] (II) fglrx(1): Adapter ATI FirePro 2260 has 2 configurable heads and 2 displays connected.
[    22.314] (==) fglrx(1):  PseudoColor visuals disabled
[    22.314] (II) Loading sub module "ramdac"
[    22.314] (II) LoadModule: "ramdac"
[    22.314] (II) Module "ramdac" already built-in
[    22.314] (==) fglrx(1): NoDRI = NO
[    22.314] (==) fglrx(1): Capabilities: 0x00000000
[    22.314] (==) fglrx(1): CapabilitiesEx: 0x00000000
[    22.314] (==) fglrx(1): OpenGL ClientDriverName: "fglrx_dri.so"
[    22.314] (==) fglrx(1): UseFastTLS=0
[    22.314] (==) fglrx(1): BlockSignalsOnLock=1
[    22.314] (II) fglrx(2): === [xdl_x760_atiddxPreInit] === begin
[    22.314] (**) fglrx(2): Depth 24, (--) framebuffer bpp 32
[    22.314] (II) fglrx(2): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    22.314] (==) fglrx(2): Default visual is TrueColor
[    22.314] (==) fglrx(2): RGB weight 888
[    22.314] (II) fglrx(2): Using 8 bits per RGB 
[    22.314] (==) fglrx(2): Buffer Tiling is ON (copy from primary)
[    22.314] (==) fglrx(2): NoAccel = NO (copy from primary screen)
[    22.314] (==) fglrx(2): ATI 2D Acceleration Architecture enabled
[    22.314] (II) Loading sub module "fb"
[    22.314] (II) LoadModule: "fb"
[    22.314] (II) Reloading /usr/lib/xorg/modules/libfb.so
[    22.314] (II) Loading sub module "ddc"
[    22.315] (II) LoadModule: "ddc"
[    22.315] (II) Module "ddc" already built-in
[    22.315] (II) fglrx(2): Output DFP1 using monitor section 1-DFP1
[    22.315] (**) fglrx(2): Option "PreferredMode" "1680x1050"
[    22.315] (**) fglrx(2): Option "Position" "0 0"
[    22.315] (**) fglrx(2): Option "Disable" "false"
[    22.315] (**) fglrx(2): Option "Rotate" "normal"
[    22.315] (**) fglrx(2): Option "TargetRefresh" "60"
[    22.315] (II) fglrx(2): Output DFP2 has no monitor section
[    22.315] (II) fglrx(2): EDID vendor "DEL", prod id 16444
[    22.315] (II) fglrx(2): Using EDID range info for horizontal sync
[    22.315] (II) fglrx(2): Using EDID range info for vertical refresh
[    22.315] (II) fglrx(2): Printing DDC gathered Modelines:
[    22.315] (II) fglrx(2): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    22.315] (II) fglrx(2): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    22.315] (II) fglrx(2): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    22.315] (II) fglrx(2): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    22.315] (II) fglrx(2): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    22.315] (II) fglrx(2): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    22.315] (II) fglrx(2): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    22.315] (II) fglrx(2): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    22.315] (II) fglrx(2): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    22.315] (II) fglrx(2): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    22.315] (II) fglrx(2): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    22.315] (II) fglrx(2): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    22.315] (II) fglrx(2): Output DFP1 connected
[    22.315] (II) fglrx(2): Output DFP2 disconnected
[    22.315] (II) fglrx(2): Using user preference for initial modes
[    22.315] (II) fglrx(2): Output DFP1 using initial mode 1680x1050
[    22.315] (II) fglrx(2): Display dimensions: (470, 300) mm
[    22.315] (II) fglrx(2): DPI set to (90, 88)
[    22.315] (WW) fglrx(0): Unable to register ADL handler for 0x00110000
[    22.315] (WW) fglrx(0): Unable to register ADL handler for 0x00120000
[    22.315] (WW) fglrx(0): Unable to register ADL handler for 0x00130000
[    22.315] (WW) fglrx(0): Unable to register ADL handler for 0x00150000
[    22.315] (II) fglrx(2): Adapter ATI FirePro 2260 has 2 configurable heads and 2 displays connected.
[    22.315] (==) fglrx(2):  PseudoColor visuals disabled
[    22.315] (==) fglrx(2): bNoDRI = NO (copy from primary screen)
[    22.315] (==) fglrx(2): UseFastTLS=0
[    22.315] (==) fglrx(2): BlockSignalsOnLock=1
[    22.315] (--) Depth 24 pixmap format is 32 bpp
[    22.315] (II) Loading extension ATIFGLRXDRI
[    22.315] (II) fglrx(0): doing swlDriScreenInit
[    22.315] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    22.315] ukiDynamicMajor: found major device number 249
[    22.315] ukiDynamicMajor: found major device number 249
[    22.315] ukiDynamicMajor: found major device number 249
[    22.315] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    22.315] ukiOpenDevice: node name is /dev/ati/card0
[    22.315] ukiOpenDevice: open result is 20, (OK)
[    22.315] ukiOpenByBusid: ukiOpenMinor returns 20
[    22.315] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    22.316] (II) fglrx(0): [uki] DRM interface version 1.0
[    22.316] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    22.316] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    22.316] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fdd585a4000
[    22.316] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    22.316] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    22.316] (II) fglrx(0): swlDriScreenInit done
[    22.316] (II) fglrx(0): Kernel Module Version Information:
[    22.316] (II) fglrx(0):     Name: fglrx
[    22.316] (II) fglrx(0):     Version: 8.78.30
[    22.316] (II) fglrx(0):     Date: Sep 20 2010
[    22.316] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    22.316] (II) fglrx(0): Kernel Module version matches driver.
[    22.316] (II) fglrx(0): Kernel Module Build Time Information:
[    22.316] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.35-28-generic
[    22.316] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[    22.316] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    22.316] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    22.316] (II) fglrx(0): [uki] register handle = 0x00004000
[    22.336] (II) fglrx(0): DRI initialization successfull
[    22.336] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01fe0000
[    22.336] (II) fglrx(0): FBMM initialized for area (0,0)-(3840,2176)
[    22.336] (II) fglrx(0): FBMM auto alloc for area (0,0)-(3840,1920) (front color buffer - assumption)
[    22.336] (II) fglrx(0): Largest offscreen area available: 3840 x 256
[    22.336] (==) fglrx(0): Backing store disabled
[    22.336] (II) Loading extension FGLRXEXTENSION
[    22.336] (==) fglrx(0): DPMS enabled
[    22.336] (II) fglrx(0): Initialized in-driver Xinerama extension
[    22.336] (**) fglrx(0): Textured Video is enabled.
[    22.336] (II) LoadModule: "glesx"
[    22.336] (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
[    22.337] (II) Module glesx: vendor="X.Org Foundation"
[    22.337] 	compiled for 1.8.99.905, module version = 1.0.0
[    22.337] (II) Loading extension GLESX
[    22.337] (II) fglrx(0): GLESX enableFlags = 592
[    22.337] (II) fglrx(0): GLESX is enabled
[    22.337] (II) fglrx(0): Acceleration enabled
[    22.337] (II) LoadModule: "amdxmm"
[    22.337] (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
[    22.337] (II) Module amdxmm: vendor="X.Org Foundation"
[    22.337] 	compiled for 1.8.99.905, module version = 1.0.0
[    22.338] (II) Loading extension AMDXVOPL
[    22.338] (II) fglrx(0): Composite extension is not loaded
[    22.338] (II) fglrx(0): X context handle = 0x1
[    22.338] (II) fglrx(0): [DRI] installation complete
[    22.338] (==) fglrx(0): Silken mouse enabled
[    22.338] (==) fglrx(0): Using HW cursor of display infrastructure!
[    22.338] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    22.445] (II) fglrx(0): User Preference Output DFP3 using refresh rate 60.0 Hz.
[    23.333] (II) fglrx(0): User Preference Output DFP4 using refresh rate 60.0 Hz.
[    23.392] (--) RandR disabled
[    23.392] (II) fglrx(1): doing swlDriScreenInit
[    23.392] (II) fglrx(1): swlDriScreenInit for fglrx driver
[    23.393] ukiDynamicMajor: found major device number 249
[    23.393] ukiDynamicMajor: found major device number 249
[    23.393] ukiDynamicMajor: found major device number 249
[    23.393] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[    23.393] ukiOpenDevice: node name is /dev/ati/card0
[    23.393] ukiOpenDevice: open result is 21, (OK)
[    23.393] ukiOpenByBusid: ukiOpenMinor returns 21
[    23.393] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    23.393] ukiOpenDevice: node name is /dev/ati/card1
[    23.393] ukiOpenDevice: open result is 21, (OK)
[    23.393] ukiOpenByBusid: ukiOpenMinor returns 21
[    23.393] ukiOpenByBusid: ukiGetBusid reports PCI:3:0:0
[    23.393] (II) fglrx(1): [uki] DRM interface version 1.0
[    23.393] (II) fglrx(1): [uki] created "fglrx" driver at busid "PCI:3:0:0"
[    23.393] (II) fglrx(1): [uki] added 8192 byte SAREA at 0x12000
[    23.393] (II) fglrx(1): [uki] mapped SAREA 0x12000 to 0x7fdd583c2000
[    23.393] (II) fglrx(1): [uki] framebuffer handle = 0x13000
[    23.393] (II) fglrx(1): [uki] added 1 reserved context for kernel
[    23.393] (II) fglrx(1): swlDriScreenInit done
[    23.393] (II) fglrx(1): Kernel Module Version Information:
[    23.393] (II) fglrx(1):     Name: fglrx
[    23.393] (II) fglrx(1):     Version: 8.78.30
[    23.393] (II) fglrx(1):     Date: Sep 20 2010
[    23.393] (II) fglrx(1):     Desc: ATI FireGL DRM kernel module
[    23.393] (II) fglrx(1): Kernel Module version matches driver.
[    23.393] (II) fglrx(1): Kernel Module Build Time Information:
[    23.393] (II) fglrx(1):     Build-Kernel UTS_RELEASE:        2.6.35-28-generic
[    23.393] (II) fglrx(1):     Build-Kernel MODVERSIONS:        yes
[    23.393] (II) fglrx(1):     Build-Kernel __SMP__:            yes
[    23.393] (II) fglrx(1):     Build-Kernel PAGE_SIZE:          0x1000
[    23.393] (II) fglrx(1): [uki] register handle = 0x00014000
[    23.413] (II) fglrx(1): DRI initialization successfull
[    23.413] (II) fglrx(1): FBADPhys: 0xc0000000 FBMappedSize: 0x0101d000
[    23.413] (II) fglrx(1): FBMM initialized for area (0,0)-(1920,2200)
[    23.413] (II) fglrx(1): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption)
[    23.413] (II) fglrx(1): Largest offscreen area available: 1920 x 280
[    23.413] (==) fglrx(1): Backing store disabled
[    23.414] (==) fglrx(1): DPMS enabled
[    23.414] (**) fglrx(1): Textured Video is enabled.
[    23.414] (II) fglrx(1): GLESX enableFlags = 528
[    23.414] (II) fglrx(1): GLESX is enabled
[    23.414] (II) fglrx(1): Acceleration enabled
[    23.414] (II) fglrx(1): Composite extension is not loaded
[    23.414] (II) fglrx(1): X context handle = 0x1
[    23.414] (II) fglrx(1): [DRI] installation complete
[    23.414] (==) fglrx(1): Silken mouse enabled
[    23.414] (==) fglrx(1): Using HW cursor of display infrastructure!
[    23.414] (II) fglrx(1): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    23.492] (II) fglrx(1): User Preference Output DFP2 using refresh rate 60.0 Hz.
[    23.892] (--) RandR disabled
[    23.892] (II) fglrx(2): doing swlDriScreenInit
[    23.892] (II) fglrx(2): swlDriScreenInit for fglrx driver
[    23.892] ukiDynamicMajor: found major device number 249
[    23.892] ukiDynamicMajor: found major device number 249
[    23.892] ukiDynamicMajor: found major device number 249
[    23.892] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[    23.892] ukiOpenDevice: node name is /dev/ati/card0
[    23.892] ukiOpenDevice: open result is 22, (OK)
[    23.892] ukiOpenByBusid: ukiOpenMinor returns 22
[    23.892] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    23.892] ukiOpenDevice: node name is /dev/ati/card1
[    23.892] ukiOpenDevice: open result is 22, (OK)
[    23.892] ukiOpenByBusid: ukiOpenMinor returns 22
[    23.892] ukiOpenByBusid: ukiGetBusid reports PCI:3:0:0
[    23.892] (II) fglrx(2): [uki] DRM interface version 1.0
[    23.892] (II) fglrx(2): [uki] created "fglrx" driver at busid "PCI:3:0:0"
[    23.892] (II) fglrx(2): [uki] added 8192 byte SAREA at 0x12000
[    23.892] (II) fglrx(2): [uki] mapped SAREA 0x12000 to 0x7fdd4f02b000
[    23.892] (II) fglrx(2): [uki] framebuffer handle = 0x13000
[    23.892] (II) fglrx(2): [uki] added 1 reserved context for kernel
[    23.892] (II) fglrx(2): swlDriScreenInit done
[    23.895] (II) fglrx(2): Display width adjusted to to 1792 due to alignment constraints
[    23.895] (II) fglrx(2): DRI initialization successfull
[    23.895] (II) fglrx(2): FBADPhys: 0xc1038000 FBMappedSize: 0x00d90000
[    23.895] (II) fglrx(2): FBMM initialized for area (0,0)-(1792,1984)
[    23.895] (II) fglrx(2): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption)
[    23.895] (II) fglrx(2): Largest offscreen area available: 1792 x 192
[    23.895] (==) fglrx(2): Backing store disabled
[    23.895] (==) fglrx(2): DPMS enabled
[    23.896] (**) fglrx(2): Textured Video is enabled.
[    23.896] (II) fglrx(2): GLESX enableFlags = 528
[    23.896] (II) fglrx(2): GLESX is enabled
[    23.896] (II) fglrx(2): Acceleration enabled
[    23.896] (II) fglrx(2): Composite extension is not loaded
[    23.896] (II) fglrx(2): X context handle = 0x2
[    23.896] (II) fglrx(2): [DRI] installation complete
[    23.896] (==) fglrx(2): Silken mouse enabled
[    23.896] (==) fglrx(2): Using HW cursor of display infrastructure!
[    23.896] (II) fglrx(2): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    23.964] (II) fglrx(2): User Preference Output DFP1 using refresh rate 60.0 Hz.
[    24.011] (--) RandR disabled
[    24.011] (II) Initializing built-in extension Generic Event Extension
[    24.011] (II) Initializing built-in extension SHAPE
[    24.011] (II) Initializing built-in extension MIT-SHM
[    24.011] (II) Initializing built-in extension XInputExtension
[    24.011] (II) Initializing built-in extension XTEST
[    24.011] (II) Initializing built-in extension BIG-REQUESTS
[    24.011] (II) Initializing built-in extension SYNC
[    24.011] (II) Initializing built-in extension XKEYBOARD
[    24.011] (II) Initializing built-in extension XC-MISC
[    24.011] (II) Initializing built-in extension SECURITY
[    24.011] (II) Initializing built-in extension XINERAMA
[    24.011] (II) Initializing built-in extension XFIXES
[    24.011] (II) Initializing built-in extension RENDER
[    24.011] (II) Initializing built-in extension RANDR
[    24.011] (II) Initializing built-in extension COMPOSITE
[    24.011] (II) Initializing built-in extension DAMAGE
[    24.011] (II) Initializing built-in extension GESTURE
[    24.032] ukiDynamicMajor: found major device number 249
[    24.032] ukiDynamicMajor: found major device number 249
[    24.032] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    24.032] ukiOpenDevice: node name is /dev/ati/card0
[    24.032] ukiOpenDevice: open result is 23, (OK)
[    24.032] ukiOpenByBusid: ukiOpenMinor returns 23
[    24.032] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    24.095] ukiDynamicMajor: found major device number 249
[    24.095] ukiDynamicMajor: found major device number 249
[    24.095] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[    24.095] ukiOpenDevice: node name is /dev/ati/card0
[    24.095] ukiOpenDevice: open result is 25, (OK)
[    24.095] ukiOpenByBusid: ukiOpenMinor returns 25
[    24.095] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    24.095] ukiOpenDevice: node name is /dev/ati/card1
[    24.095] ukiOpenDevice: open result is 25, (OK)
[    24.095] ukiOpenByBusid: ukiOpenMinor returns 25
[    24.095] ukiOpenByBusid: ukiGetBusid reports PCI:3:0:0
[    24.160] (II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
[    24.160] (II) GLX: Initialized DRI GL provider for screen 0
[    24.160] ukiDynamicMajor: found major device number 249
[    24.160] ukiDynamicMajor: found major device number 249
[    24.160] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[    24.160] ukiOpenDevice: node name is /dev/ati/card0
[    24.160] ukiOpenDevice: open result is 26, (OK)
[    24.160] ukiOpenByBusid: ukiOpenMinor returns 26
[    24.160] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    24.161] ukiOpenDevice: node name is /dev/ati/card1
[    24.161] ukiOpenDevice: open result is 26, (OK)
[    24.161] ukiOpenByBusid: ukiOpenMinor returns 26
[    24.161] ukiOpenByBusid: ukiGetBusid reports PCI:3:0:0
[    24.161] (II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
[    24.161] (II) GLX: Initialized DRI GL provider for screen 1
[    24.161] ukiDynamicMajor: found major device number 249
[    24.161] ukiDynamicMajor: found major device number 249
[    24.161] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[    24.161] ukiOpenDevice: node name is /dev/ati/card0
[    24.161] ukiOpenDevice: open result is 27, (OK)
[    24.161] ukiOpenByBusid: ukiOpenMinor returns 27
[    24.161] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    24.161] ukiOpenDevice: node name is /dev/ati/card1
[    24.161] ukiOpenDevice: open result is 27, (OK)
[    24.161] ukiOpenByBusid: ukiOpenMinor returns 27
[    24.161] ukiOpenByBusid: ukiGetBusid reports PCI:3:0:0
[    24.161] (II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
[    24.161] (II) GLX: Initialized DRI GL provider for screen 2
[    24.161] (II) fglrx(0): Enable the clock gating!
[    24.161] (II) fglrx(1): Enable the clock gating!
[    24.178] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    24.185] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    24.185] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.185] (II) LoadModule: "evdev"
[    24.185] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.186] (II) Module evdev: vendor="X.Org Foundation"
[    24.186] 	compiled for 1.9.0, module version = 2.3.2
[    24.186] 	Module class: X.Org XInput Driver
[    24.186] 	ABI class: X.Org XInput driver, version 11.0
[    24.186] (**) Power Button: always reports core events
[    24.186] (**) Power Button: Device: "/dev/input/event1"
[    24.251] (II) Power Button: Found keys
[    24.251] (II) Power Button: Configuring as keyboard
[    24.252] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    24.252] (**) Option "xkb_rules" "evdev"
[    24.252] (**) Option "xkb_model" "pc105"
[    24.252] (**) Option "xkb_layout" "us"
[    24.252] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    24.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.252] (**) Power Button: always reports core events
[    24.252] (**) Power Button: Device: "/dev/input/event0"
[    24.371] (II) Power Button: Found keys
[    24.371] (II) Power Button: Configuring as keyboard
[    24.371] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    24.371] (**) Option "xkb_rules" "evdev"
[    24.371] (**) Option "xkb_model" "pc105"
[    24.371] (**) Option "xkb_layout" "us"
[    24.372] (II) config/udev: Adding input device Logitech G500 (/dev/input/event2)
[    24.372] (**) Logitech G500: Applying InputClass "evdev pointer catchall"
[    24.372] (**) Logitech G500: always reports core events
[    24.372] (**) Logitech G500: Device: "/dev/input/event2"
[    24.451] (II) Logitech G500: Found 20 mouse buttons
[    24.451] (II) Logitech G500: Found scroll wheel(s)
[    24.451] (II) Logitech G500: Found relative axes
[    24.451] (II) Logitech G500: Found x and y relative axes
[    24.451] (II) Logitech G500: Configuring as mouse
[    24.451] (**) Logitech G500: YAxisMapping: buttons 4 and 5
[    24.451] (**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.451] (II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE)
[    24.451] (II) Logitech G500: initialized for relative axes.
[    24.451] (II) config/udev: Adding input device Logitech G500 (/dev/input/mouse0)
[    24.451] (II) No input driver/identifier specified (ignoring)
[    24.452] (II) config/udev: Adding input device Logitech G500 (/dev/input/event3)
[    24.452] (**) Logitech G500: Applying InputClass "evdev keyboard catchall"
[    24.452] (**) Logitech G500: always reports core events
[    24.452] (**) Logitech G500: Device: "/dev/input/event3"
[    24.531] (II) Logitech G500: Found 1 mouse buttons
[    24.531] (II) Logitech G500: Found scroll wheel(s)
[    24.531] (II) Logitech G500: Found relative axes
[    24.531] (II) Logitech G500: Found absolute axes
[    24.531] (II) evdev-grail: failed to open grail, no gesture support
[    24.531] (II) Logitech G500: Found keys
[    24.531] (II) Logitech G500: Configuring as mouse
[    24.531] (II) Logitech G500: Configuring as keyboard
[    24.531] (**) Logitech G500: YAxisMapping: buttons 4 and 5
[    24.531] (**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.531] (II) XINPUT: Adding extended input device "Logitech G500" (type: KEYBOARD)
[    24.531] (**) Option "xkb_rules" "evdev"
[    24.531] (**) Option "xkb_model" "pc105"
[    24.531] (**) Option "xkb_layout" "us"
[    24.531] (EE) Logitech G500: failed to initialize for relative axes.
[    24.531] (II) Logitech G500: initialized for absolute axes.
[    24.532] (II) config/udev: Adding input device HDA Intel Line Out at Ext Rear Jack (/dev/input/event10)
[    24.532] (II) No input driver/identifier specified (ignoring)
[    24.532] (II) config/udev: Adding input device HDA Intel Line Out at Ext Rear Jack (/dev/input/event11)
[    24.532] (II) No input driver/identifier specified (ignoring)
[    24.533] (II) config/udev: Adding input device HDA Intel Line Out at Ext Rear Jack (/dev/input/event12)
[    24.533] (II) No input driver/identifier specified (ignoring)
[    24.533] (II) config/udev: Adding input device HDA Intel HP Out at Ext Front Jack (/dev/input/event13)
[    24.533] (II) No input driver/identifier specified (ignoring)
[    24.533] (II) config/udev: Adding input device HDA Intel Mic at Ext Front Jack (/dev/input/event7)
[    24.533] (II) No input driver/identifier specified (ignoring)
[    24.533] (II) config/udev: Adding input device HDA Intel Mic at Ext Rear Jack (/dev/input/event8)
[    24.533] (II) No input driver/identifier specified (ignoring)
[    24.533] (II) config/udev: Adding input device HDA Intel Line Out at Ext Rear Jack (/dev/input/event9)
[    24.533] (II) No input driver/identifier specified (ignoring)
[    24.535] (II) config/udev: Adding input device Microsoft Microsoft® SiderWinderTM X6 Keyboard (/dev/input/event4)
[    24.535] (**) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Applying InputClass "evdev keyboard catchall"
[    24.535] (**) Microsoft Microsoft® SiderWinderTM X6 Keyboard: always reports core events
[    24.535] (**) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Device: "/dev/input/event4"
[    24.611] (II) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Found keys
[    24.611] (II) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Configuring as keyboard
[    24.611] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SiderWinderTM X6 Keyboard" (type: KEYBOARD)
[    24.611] (**) Option "xkb_rules" "evdev"
[    24.611] (**) Option "xkb_model" "pc105"
[    24.611] (**) Option "xkb_layout" "us"
[    24.611] (II) config/udev: Adding input device Microsoft Microsoft® SiderWinderTM X6 Keyboard (/dev/input/event5)
[    24.611] (**) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Applying InputClass "evdev keyboard catchall"
[    24.611] (**) Microsoft Microsoft® SiderWinderTM X6 Keyboard: always reports core events
[    24.611] (**) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Device: "/dev/input/event5"
[    24.691] (II) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Found 1 mouse buttons
[    24.691] (II) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Found scroll wheel(s)
[    24.691] (II) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Found relative axes
[    24.691] (II) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Found absolute axes
[    24.692] (II) evdev-grail: failed to open grail, no gesture support
[    24.692] (II) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Found keys
[    24.692] (II) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Configuring as mouse
[    24.692] (II) Microsoft Microsoft® SiderWinderTM X6 Keyboard: Configuring as keyboard
[    24.692] (**) Microsoft Microsoft® SiderWinderTM X6 Keyboard: YAxisMapping: buttons 4 and 5
[    24.692] (**) Microsoft Microsoft® SiderWinderTM X6 Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.692] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SiderWinderTM X6 Keyboard" (type: KEYBOARD)
[    24.692] (**) Option "xkb_rules" "evdev"
[    24.692] (**) Option "xkb_model" "pc105"
[    24.692] (**) Option "xkb_layout" "us"
[    24.692] (EE) Microsoft Microsoft® SiderWinderTM X6 Keyboard: failed to initialize for relative axes.
[    24.692] (II) Microsoft Microsoft® SiderWinderTM X6 Keyboard: initialized for absolute axes.
[    24.692] (II) config/udev: Adding input device UVC Camera (046d:09a1) (/dev/input/event6)
[    24.692] (**) UVC Camera (046d:09a1): Applying InputClass "evdev keyboard catchall"
[    24.693] (**) UVC Camera (046d:09a1): always reports core events
[    24.693] (**) UVC Camera (046d:09a1): Device: "/dev/input/event6"
[    24.771] (II) UVC Camera (046d:09a1): Found keys
[    24.771] (II) UVC Camera (046d:09a1): Configuring as keyboard
[    24.771] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a1)" (type: KEYBOARD)
[    24.771] (**) Option "xkb_rules" "evdev"
[    24.771] (**) Option "xkb_model" "pc105"
[    24.772] (**) Option "xkb_layout" "us"
[    24.808] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    24.808] (II) fglrx(1): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    24.808] (II) fglrx(2): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments