X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
Current Operating System: Linux desktop 2.6.32-25-generic-pae #44-Ubuntu SMP Fri Sep 17 21:57:48 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic-pae root=UUID=399582a3-61d6-4827-8895-e8f7ff6da436 ro quiet splash
Build Date: 21 July 2010  12:47:34PM
xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 29 11:15:27 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "amdcccle Layout"
(**) |-->Screen "amdcccle-Screen[1]-0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "amdcccle-Device[1]-0"
(==) No monitor specified for screen "amdcccle-Screen[1]-0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:95c5:1028:0342 ATI Technologies Inc RV620 LE [Radeon HD 3450] rev 0, Mem @ 0xe0000000/268435456, 0xf7df0000/65536, I/O @ 0x0000dc00/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.11
	Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.11
(II) ATI Proprietary Linux Driver Version Identifier:8.72.11
(II) ATI Proprietary Linux Driver Release Identifier: 8.723.1                              
(II) ATI Proprietary Linux Driver Build Date: Apr  8 2010 21:40:29
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x95C5) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x8eba670
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
ukiDynamicMajor: failed to open /proc/ati/major
ukiDynamicMajor: failed to open /proc/ati/major
(--) fglrx(0): Chipset: "ATI Radeon HD 3400 Series" (Chipset = 0x95c5)
(--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x0342)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xf7df0000
(--) fglrx(0): I/O port at 0x0000dc00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(EE) fglrx(0): Hasn't establisted DRM connection
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.88
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: RV620
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(EE) fglrx(0): Hasn't establisted DRM connection
(WW) fglrx(0): Hasn't establisted DRM connection
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(WW) fglrx(0): No DRM connection for driver fglrx.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: DFP on internal TMDS [tmds1]
(WW) EDID preferred timing clock 162.00MHz exceeds claimed max 160MHz, fixing
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: DEL  Model: a008  Serial#: 843467340
(II) fglrx(0): Year: 2005  Week: 17
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 31
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.638 redY: 0.342   greenX: 0.293 greenY: 0.608
(II) fglrx(0): blueX: 0.146 blueY: 0.067   whiteX: 0.312 whiteY: 0.328
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) fglrx(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 162.0 MHz   Image Size:  367 x 275 mm
(II) fglrx(0): h_active: 1600  h_sync: 1664  h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) fglrx(0): v_active: 1200  v_sync: 1201  v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) fglrx(0): Serial No: C064654L2FJL
(II) fglrx(0): Monitor name: DELL 2001FP
(II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 162 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff0010ac08a04c4a4632
(II) fglrx(0): 	110f010380291f78ee6390a3574b9b25
(II) fglrx(0): 	115054a54b008180a940714f01010101
(II) fglrx(0): 	010101010101483f403062b0324040c0
(II) fglrx(0): 	13006f131100001e000000ff00433036
(II) fglrx(0): 	343635344c32464a4c20000000fc0044
(II) fglrx(0): 	454c4c203230303146500a20000000fd
(II) fglrx(0): 	00384c1f5010000a2020202020200033
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Connected Display1: DFP on secondary TMDS [tmds2i]
(WW) EDID preferred timing clock 162.00MHz exceeds claimed max 160MHz, fixing
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: DEL  Model: a008  Serial#: 843467852
(II) fglrx(0): Year: 2005  Week: 17
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 31
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.638 redY: 0.342   greenX: 0.293 greenY: 0.608
(II) fglrx(0): blueX: 0.146 blueY: 0.067   whiteX: 0.312 whiteY: 0.328
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) fglrx(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 162.0 MHz   Image Size:  367 x 275 mm
(II) fglrx(0): h_active: 1600  h_sync: 1664  h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) fglrx(0): v_active: 1200  v_sync: 1201  v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) fglrx(0): Serial No: C064654L2FLL
(II) fglrx(0): Monitor name: DELL 2001FP
(II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 162 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff0010ac08a04c4c4632
(II) fglrx(0): 	110f010380291f78ee6390a3574b9b25
(II) fglrx(0): 	115054a54b008180a940714f01010101
(II) fglrx(0): 	010101010101483f403062b0324040c0
(II) fglrx(0): 	13006f131100001e000000ff00433036
(II) fglrx(0): 	343635344c32464c4c20000000fc0044
(II) fglrx(0): 	454c4c203230303146500a20000000fd
(II) fglrx(0): 	00384c1f5010000a202020202020002f
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output DFP1 using monitor section 0-DFP1
(**) fglrx(0): Option "PreferredMode" "1600x1200"
(**) fglrx(0): Option "Position" "0 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output DFP2 using monitor section 0-DFP2
(**) fglrx(0): Option "PreferredMode" "1600x1200"
(**) fglrx(0): Option "Position" "1600 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): Output DFP1 connected
(II) fglrx(0): Output DFP2 connected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output DFP1 using initial mode 1600x1200
(II) fglrx(0): Output DFP2 using initial mode 1600x1200
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Radeon HD 3400 Series has 2 configurable heads and 2 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. 
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x10000000
(II) fglrx(0): FBMM initialized for area (0,0)-(3200,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(3200,3200) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 3200 x 4991
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.2.1
	ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 78
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(II) fglrx(0): Enable composite support successfully
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot set TV horizontal size.
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. 
(II) fglrx(0): Cannot set TV horizontal position.
(II) fglrx(0): Cannot set TV vertical position.
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP2 using refresh rate 60.0 Hz.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(II) AIGLX: Screen 0 is not DRI capable
(II) fglrx(0): Setting screen physical size to 846 x 317
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event3)
(**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Dell Dell USB Keyboard: always reports core events
(**) Dell Dell USB Keyboard: Device: "/dev/input/event3"
(II) Dell Dell USB Keyboard: Found keys
(II) Dell Dell USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Dell Dell USB Optical Mouse (/dev/input/event4)
(**) Dell Dell USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Dell Dell USB Optical Mouse: always reports core events
(**) Dell Dell USB Optical Mouse: Device: "/dev/input/event4"
(II) Dell Dell USB Optical Mouse: Found 3 mouse buttons
(II) Dell Dell USB Optical Mouse: Found scroll wheel(s)
(II) Dell Dell USB Optical Mouse: Found relative axes
(II) Dell Dell USB Optical Mouse: Found x and y relative axes
(II) Dell Dell USB Optical Mouse: Configuring as mouse
(**) Dell Dell USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Dell Dell USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Dell Dell USB Optical Mouse" (type: MOUSE)
(II) Dell Dell USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Dell Dell USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(II) XKB: reuse xkmfile /var/lib/xkb/server-E0DB3B9AFB03991C0327C6EEA244E95565400538.xkm
(WW) fglrx(0): Cannot get updated TV attributes.