[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 (Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=/dev/sdb1 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 130000000 mask FF0000000 uncachable [ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] modified: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] modified: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfee0000 page 4k [ 0.000000] kernel direct mapping tables up to cfee0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000 [ 0.000000] RAMDISK: 377ad000 - 37feffa6 [ 0.000000] ACPI: RSDP 00000000000f6ed0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee3180 0549D (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfee0000 00040 [ 0.000000] ACPI: HPET 00000000cfee8780 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfee8800 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SLIC 00000000cfee0050 00176 (v01 GBT GBTUACPI 00000001 MSFT 000F4240) [ 0.000000] ACPI: APIC 00000000cfee8680 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000cfee9160 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000011fff] [ 0.000000] bootmap [0000000000012000 - 0000000000037fff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377ad000 - 0037feffa6] RAMDISK ==> [00377ad000 - 0037feffa6] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a300f6] BRK ==> [0001a30000 - 0001a300f6] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f5510] f5510 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000cfee0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048184 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 106 pages reserved [ 0.000000] DMA zone: 3830 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000 [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031054 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=/dev/sdb1 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4047756k/4980736k available (5422k kernel code, 788000k absent, 144980k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3600.356 MHz processor. [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.71 BogoMIPS (lpj=36003560) [ 0.000026] Security Framework initialized [ 0.000041] AppArmor: AppArmor initialized [ 0.000304] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011554] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012364] Mount-cache hash table entries: 256 [ 0.012480] Initializing cgroup subsys ns [ 0.012485] Initializing cgroup subsys cpuacct [ 0.012487] Initializing cgroup subsys memory [ 0.012493] Initializing cgroup subsys devices [ 0.012495] Initializing cgroup subsys freezer [ 0.012496] Initializing cgroup subsys net_cls [ 0.012510] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.012512] CPU: L2 cache: 4096K [ 0.012515] CPU 0/0x0 -> Node 0 [ 0.012516] CPU: Physical Processor ID: 0 [ 0.012517] CPU: Processor Core ID: 0 [ 0.012520] mce: CPU supports 6 MCE banks [ 0.012526] CPU0: Thermal monitoring enabled (TM2) [ 0.012530] using mwait in idle threads. [ 0.012531] Performance Events: Core2 events, Intel PMU driver. [ 0.012536] ... version: 2 [ 0.012537] ... bit width: 40 [ 0.012538] ... generic registers: 2 [ 0.012539] ... value mask: 000000ffffffffff [ 0.012540] ... max period: 000000007fffffff [ 0.012541] ... fixed-purpose events: 3 [ 0.012542] ... event mask: 0000000700000003 [ 0.014241] ACPI: Core revision 20090903 [ 0.020018] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.020025] ftrace: allocating 22529 entries in 89 pages [ 0.026463] Setting APIC routing to flat [ 0.026757] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.128040] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.130000] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU 1/0x2 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 2 [ 0.010000] CPU1: Thermal monitoring enabled (TM2) [ 0.280096] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.280102] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.290051] Booting processor 2 APIC 0x3 ip 0x6000 [ 0.010000] Initializing CPU#2 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU 2/0x3 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 3 [ 0.010000] CPU2: Thermal monitoring enabled (TM2) [ 0.450059] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.450064] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.460054] Booting processor 3 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#3 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU 3/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] CPU3: Thermal monitoring enabled (TM2) [ 0.620105] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.620110] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.630016] Brought up 4 CPUs [ 0.630018] Total of 4 processors activated (28801.04 BogoMIPS). [ 0.631225] CPU0 attaching sched-domain: [ 0.631227] domain 0: span 0,3 level MC [ 0.631229] groups: 0 3 [ 0.631232] domain 1: span 0-3 level CPU [ 0.631233] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048) [ 0.631239] CPU1 attaching sched-domain: [ 0.631240] domain 0: span 1-2 level MC [ 0.631241] groups: 1 2 [ 0.631244] domain 1: span 0-3 level CPU [ 0.631245] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048) [ 0.631249] CPU2 attaching sched-domain: [ 0.631250] domain 0: span 1-2 level MC [ 0.631252] groups: 2 1 [ 0.631254] domain 1: span 0-3 level CPU [ 0.631256] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048) [ 0.631259] CPU3 attaching sched-domain: [ 0.631261] domain 0: span 0,3 level MC [ 0.631262] groups: 3 0 [ 0.631264] domain 1: span 0-3 level CPU [ 0.631266] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048) [ 0.631376] devtmpfs: initialized [ 0.631376] regulator: core version 0.5 [ 0.631376] Time: 6:06:30 Date: 09/21/10 [ 0.631376] NET: Registered protocol family 16 [ 0.631376] Trying to unpack rootfs image as initramfs... [ 0.631376] ACPI: bus type pci registered [ 0.631376] PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255 [ 0.631376] PCI: MCFG area at d0000000 reserved in E820 [ 0.634928] PCI: Using MMCONFIG at d0000000 - dfffffff [ 0.634930] PCI: Using configuration type 1 for base access [ 0.635421] bio: create slab at 0 [ 0.635439] ACPI: EC: Look up EC in DSDT [ 0.642353] ACPI: Interpreter enabled [ 0.642359] ACPI: (supports S0 S3 S4 S5) [ 0.642374] ACPI: Using IOAPIC for interrupt routing [ 0.645768] ACPI: No dock devices found. [ 0.645839] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.645932] pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f] [ 0.645985] pci 0000:00:1a.1: reg 20 io port: [0xe100-0xe11f] [ 0.646038] pci 0000:00:1a.2: reg 20 io port: [0xe500-0xe51f] [ 0.646085] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf5005000-0xf50053ff] [ 0.646146] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf5000000-0xf5003fff] [ 0.646178] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.646181] pci 0000:00:1b.0: PME# disabled [ 0.646227] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.646230] pci 0000:00:1c.0: PME# disabled [ 0.646282] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.646284] pci 0000:00:1c.4: PME# disabled [ 0.646328] pci 0000:00:1d.0: reg 20 io port: [0xe200-0xe21f] [ 0.646382] pci 0000:00:1d.1: reg 20 io port: [0xe300-0xe31f] [ 0.646435] pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f] [ 0.646481] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf5004000-0xf50043ff] [ 0.646609] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.646612] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.646614] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.646617] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.646667] pci 0000:00:1f.2: reg 10 io port: [0xe600-0xe607] [ 0.646671] pci 0000:00:1f.2: reg 14 io port: [0xe700-0xe703] [ 0.646675] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807] [ 0.646680] pci 0000:00:1f.2: reg 1c io port: [0xe900-0xe903] [ 0.646684] pci 0000:00:1f.2: reg 20 io port: [0xea00-0xea1f] [ 0.646688] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf5006000-0xf50067ff] [ 0.646713] pci 0000:00:1f.2: PME# supported from D3hot [ 0.646715] pci 0000:00:1f.2: PME# disabled [ 0.646736] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf5007000-0xf50070ff] [ 0.646747] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.646796] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.646806] pci 0000:01:00.0: reg 18 64bit mmio: [0xf1000000-0xf100ffff] [ 0.646812] pci 0000:01:00.0: reg 20 io port: [0xb000-0xb0ff] [ 0.646822] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.646844] pci 0000:01:00.0: supports D1 D2 [ 0.646883] pci 0000:01:00.1: reg 10 64bit mmio: [0xf1010000-0xf1013fff] [ 0.646926] pci 0000:01:00.1: supports D1 D2 [ 0.646967] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff] [ 0.646970] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0000000-0xf1ffffff] [ 0.646974] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.647022] pci 0000:02:00.0: reg 10 io port: [0xc000-0xc007] [ 0.647030] pci 0000:02:00.0: reg 14 io port: [0xc100-0xc103] [ 0.647037] pci 0000:02:00.0: reg 18 io port: [0xc200-0xc207] [ 0.647045] pci 0000:02:00.0: reg 1c io port: [0xc300-0xc303] [ 0.647052] pci 0000:02:00.0: reg 20 io port: [0xc400-0xc40f] [ 0.647066] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.647136] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.647139] pci 0000:00:1c.4: bridge 32bit mmio: [0xf2000000-0xf2ffffff] [ 0.647170] pci 0000:03:01.0: reg 10 32bit mmio: [0xf4000000-0xf4007fff] [ 0.647236] pci 0000:03:05.0: reg 10 io port: [0xd000-0xd0ff] [ 0.647241] pci 0000:03:05.0: reg 14 32bit mmio: [0xf4008000-0xf40080ff] [ 0.647261] pci 0000:03:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.647275] pci 0000:03:05.0: supports D1 D2 [ 0.647277] pci 0000:03:05.0: PME# supported from D1 D2 D3hot D3cold [ 0.647280] pci 0000:03:05.0: PME# disabled [ 0.647311] pci 0000:00:1e.0: transparent bridge [ 0.647314] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.647317] pci 0000:00:1e.0: bridge 32bit mmio: [0xf3000000-0xf4ffffff] [ 0.647332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.647445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.647486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.647531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.657820] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.657889] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.657956] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.658025] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.658092] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.658159] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.658227] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.658298] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.658380] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.658383] vgaarb: loaded [ 0.658456] SCSI subsystem initialized [ 0.658485] libata version 3.00 loaded. [ 0.658485] usbcore: registered new interface driver usbfs [ 0.658485] usbcore: registered new interface driver hub [ 0.658485] usbcore: registered new device driver usb [ 0.658485] ACPI: WMI: Mapper loaded [ 0.658485] PCI: Using ACPI for IRQ routing [ 0.658485] NetLabel: Initializing [ 0.658485] NetLabel: domain hash size = 128 [ 0.658485] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.658485] NetLabel: unlabeled traffic allowed by default [ 0.658485] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.658485] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.690011] Switching to clocksource tsc [ 0.691234] AppArmor: AppArmor Filesystem Enabled [ 0.691243] pnp: PnP ACPI init [ 0.691249] ACPI: bus type pnp registered [ 0.692764] pnp: PnP ACPI: found 11 devices [ 0.692765] ACPI: ACPI bus type pnp unregistered [ 0.692772] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.692774] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.692776] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.692777] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.692779] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.692784] system 00:07: ioport range 0x400-0x4bf could not be reserved [ 0.692787] system 00:08: iomem range 0xd0000000-0xdfffffff has been reserved [ 0.692791] system 00:09: iomem range 0xd2a00-0xd3fff has been reserved [ 0.692793] system 00:09: iomem range 0xf0000-0xf7fff could not be reserved [ 0.692795] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 0.692797] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 0.692799] system 00:09: iomem range 0xcfee0000-0xcfefffff could not be reserved [ 0.692801] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.692803] system 00:09: iomem range 0x100000-0xcfedffff could not be reserved [ 0.692805] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.692807] system 00:09: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.692809] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.692811] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.692812] system 00:09: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.692814] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved [ 0.692816] system 00:09: iomem range 0xe0000-0xeffff has been reserved [ 0.697463] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.697465] pci 0000:00:1c.0: IO window: 0xb000-0xbfff [ 0.697469] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf1ffffff [ 0.697472] pci 0000:00:1c.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.697477] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 [ 0.697479] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.697482] pci 0000:00:1c.4: MEM window: 0xf2000000-0xf2ffffff [ 0.697485] pci 0000:00:1c.4: PREFETCH window: 0xf5100000-0xf52fffff [ 0.697489] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.697491] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.697495] pci 0000:00:1e.0: MEM window: 0xf3000000-0xf4ffffff [ 0.697497] pci 0000:00:1e.0: PREFETCH window: 0xf5300000-0xf53fffff [ 0.697507] alloc irq_desc for 16 on node -1 [ 0.697508] alloc kstat_irqs on node -1 [ 0.697512] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.697515] pci 0000:00:1c.0: setting latency timer to 64 [ 0.697521] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.697523] pci 0000:00:1c.4: setting latency timer to 64 [ 0.697528] pci 0000:00:1e.0: setting latency timer to 64 [ 0.697531] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.697532] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.697534] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.697536] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf1ffffff] [ 0.697537] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.697539] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.697540] pci_bus 0000:02: resource 1 mem: [0xf2000000-0xf2ffffff] [ 0.697542] pci_bus 0000:02: resource 2 pref mem [0xf5100000-0xf52fffff] [ 0.697543] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.697545] pci_bus 0000:03: resource 1 mem: [0xf3000000-0xf4ffffff] [ 0.697546] pci_bus 0000:03: resource 2 pref mem [0xf5300000-0xf53fffff] [ 0.697548] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.697549] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.697569] NET: Registered protocol family 2 [ 0.697679] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.698437] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.701353] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.701750] TCP: Hash tables configured (established 524288 bind 65536) [ 0.701752] TCP reno registered [ 0.701847] NET: Registered protocol family 1 [ 0.701975] pci 0000:01:00.0: Boot video device [ 0.702203] Scanning for low memory corruption every 60 seconds [ 0.702304] audit: initializing netlink socket (disabled) [ 0.702311] type=2000 audit(1285049190.699:1): initialized [ 0.708744] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.709711] VFS: Disk quotas dquot_6.5.2 [ 0.709745] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.710162] fuse init (API version 7.13) [ 0.710220] msgmni has been set to 7905 [ 0.710415] alg: No test for stdrng (krng) [ 0.710463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.710465] io scheduler noop registered [ 0.710466] io scheduler anticipatory registered [ 0.710468] io scheduler deadline registered [ 0.710490] io scheduler cfq registered (default) [ 0.710587] alloc irq_desc for 24 on node -1 [ 0.710588] alloc kstat_irqs on node -1 [ 0.710596] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.710602] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.710688] alloc irq_desc for 25 on node -1 [ 0.710689] alloc kstat_irqs on node -1 [ 0.710694] pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X [ 0.710699] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.710756] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.710807] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.710876] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.710879] ACPI: Power Button [PWRB] [ 0.710916] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.710918] ACPI: Power Button [PWRF] [ 0.711270] ACPI: SSDT 00000000cfee8880 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.711402] processor LNXCPU:00: registered as cooling_device0 [ 0.711545] ACPI: SSDT 00000000cfee8d40 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.711735] processor LNXCPU:01: registered as cooling_device1 [ 0.711937] ACPI: SSDT 00000000cfee8ea0 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.712196] processor LNXCPU:02: registered as cooling_device2 [ 0.712352] ACPI: SSDT 00000000cfee9000 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.712512] processor LNXCPU:03: registered as cooling_device3 [ 0.714815] Linux agpgart interface v0.103 [ 0.714837] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.715642] brd: module loaded [ 0.715937] loop: module loaded [ 0.715989] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.716078] pata_acpi 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.716100] pata_acpi 0000:02:00.0: setting latency timer to 64 [ 0.716111] pata_acpi 0000:02:00.0: PCI INT A disabled [ 0.716291] Fixed MDIO Bus: probed [ 0.716311] PPP generic driver version 2.4.2 [ 0.716331] tun: Universal TUN/TAP device driver, 1.6 [ 0.716332] tun: (C) 1999-2004 Max Krasnyansky [ 0.716380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.716391] alloc irq_desc for 18 on node -1 [ 0.716392] alloc kstat_irqs on node -1 [ 0.716397] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.716406] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.716409] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.716433] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.720338] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.720349] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf5005000 [ 0.739987] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.740050] usb usb1: configuration #1 chosen from 1 choice [ 0.740068] hub 1-0:1.0: USB hub found [ 0.740074] hub 1-0:1.0: 6 ports detected [ 0.740111] alloc irq_desc for 23 on node -1 [ 0.740112] alloc kstat_irqs on node -1 [ 0.740115] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.740122] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.740124] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.740147] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.744044] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.744052] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5004000 [ 0.758692] Freeing initrd memory: 8459k freed [ 0.759883] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.759926] usb usb2: configuration #1 chosen from 1 choice [ 0.759944] hub 2-0:1.0: USB hub found [ 0.759949] hub 2-0:1.0: 6 ports detected [ 0.759986] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.759997] uhci_hcd: USB Universal Host Controller Interface driver [ 0.760011] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.760015] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.760017] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.760039] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.760065] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 [ 0.760126] usb usb3: configuration #1 chosen from 1 choice [ 0.760142] hub 3-0:1.0: USB hub found [ 0.760147] hub 3-0:1.0: 2 ports detected [ 0.760178] alloc irq_desc for 21 on node -1 [ 0.760179] alloc kstat_irqs on node -1 [ 0.760182] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.760186] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.760188] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.760211] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.760235] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100 [ 0.760291] usb usb4: configuration #1 chosen from 1 choice [ 0.760310] hub 4-0:1.0: USB hub found [ 0.760314] hub 4-0:1.0: 2 ports detected [ 0.760342] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.760347] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.760349] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.760378] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.760397] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500 [ 0.760457] usb usb5: configuration #1 chosen from 1 choice [ 0.760475] hub 5-0:1.0: USB hub found [ 0.760479] hub 5-0:1.0: 2 ports detected [ 0.760509] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.760513] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.760515] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.760534] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.760556] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200 [ 0.760614] usb usb6: configuration #1 chosen from 1 choice [ 0.760632] hub 6-0:1.0: USB hub found [ 0.760636] hub 6-0:1.0: 2 ports detected [ 0.760670] alloc irq_desc for 19 on node -1 [ 0.760671] alloc kstat_irqs on node -1 [ 0.760674] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.760678] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.760680] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.760701] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.760726] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300 [ 0.760786] usb usb7: configuration #1 chosen from 1 choice [ 0.760809] hub 7-0:1.0: USB hub found [ 0.760813] hub 7-0:1.0: 2 ports detected [ 0.760844] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.760849] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.760851] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.760870] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.760889] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400 [ 0.760953] usb usb8: configuration #1 chosen from 1 choice [ 0.760969] hub 8-0:1.0: USB hub found [ 0.760973] hub 8-0:1.0: 2 ports detected [ 0.761036] PNP: No PS/2 controller found. Probing ports directly. [ 0.761379] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.761388] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.761536] mice: PS/2 mouse device common for all mice [ 0.761619] rtc_cmos 00:04: RTC can wake from S4 [ 0.761651] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.761671] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.761766] device-mapper: uevent: version 1.0.3 [ 0.761859] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.761958] device-mapper: multipath: version 1.1.0 loaded [ 0.761961] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.762175] cpuidle: using governor ladder [ 0.762177] cpuidle: using governor menu [ 0.762424] TCP cubic registered [ 0.762504] NET: Registered protocol family 10 [ 0.762795] lo: Disabled Privacy Extensions [ 0.762964] NET: Registered protocol family 17 [ 0.766602] PM: Resume from disk failed. [ 0.766610] registered taskstats version 1 [ 0.766892] Magic number: 10:295:115 [ 0.766964] rtc_cmos 00:04: setting system clock to 2010-09-21 06:06:31 UTC (1285049191) [ 0.766966] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.766967] EDD information not available. [ 0.767009] Freeing unused kernel memory: 880k freed [ 0.767209] Write protecting the kernel read-only data: 7696k [ 0.777370] udev: starting version 151 [ 0.796843] ahci 0000:00:1f.2: version 3.0 [ 0.796859] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.796901] alloc irq_desc for 26 on node -1 [ 0.796902] alloc kstat_irqs on node -1 [ 0.796910] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X [ 0.796941] ahci: SSS flag set, parallel bus scan disabled [ 0.796966] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.796969] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 0.796972] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.800645] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.800662] r8169 0000:03:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.800692] r8169 0000:03:05.0: no PCI Express capability [ 0.801072] eth0: RTL8169sc/8110sc at 0xffffc90000662000, 00:1a:4d:52:d8:31, XID 18000000 IRQ 21 [ 0.808954] pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.808982] pata_jmicron 0000:02:00.0: setting latency timer to 64 [ 0.812142] scsi0 : pata_jmicron [ 0.814459] scsi1 : pata_jmicron [ 0.814988] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16 [ 0.814991] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16 [ 0.850498] scsi2 : ahci [ 0.850569] scsi3 : ahci [ 0.850627] scsi4 : ahci [ 0.850677] scsi5 : ahci [ 0.850728] scsi6 : ahci [ 0.850792] scsi7 : ahci [ 0.850927] ata3: SATA max UDMA/133 abar m2048@0xf5006000 port 0xf5006100 irq 26 [ 0.850930] ata4: SATA max UDMA/133 abar m2048@0xf5006000 port 0xf5006180 irq 26 [ 0.850932] ata5: DUMMY [ 0.850933] ata6: DUMMY [ 0.850935] ata7: SATA max UDMA/133 abar m2048@0xf5006000 port 0xf5006300 irq 26 [ 0.850938] ata8: SATA max UDMA/133 abar m2048@0xf5006000 port 0xf5006380 irq 26 [ 1.120009] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 1.276908] usb 1-4: configuration #1 chosen from 1 choice [ 1.380012] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.380287] ata3.00: HPA unlocked: 62531183 -> 62533296, native 62533296 [ 1.380310] ata3.00: ATA-8: OCZ-VERTEX, 1.5, max UDMA/133 [ 1.380312] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.380997] ata3.00: configured for UDMA/133 [ 1.400084] scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX 1.5 PQ: 0 ANSI: 5 [ 1.400190] sd 2:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.400214] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.400219] sd 2:0:0:0: [sda] Write Protect is off [ 1.400221] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.400236] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.400332] sda: sda1 [ 1.400559] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.560009] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 1.748215] usb 4-1: configuration #1 chosen from 1 choice [ 1.756860] usbcore: registered new interface driver hiddev [ 1.757007] usbcore: registered new interface driver usbhid [ 1.757009] usbhid: v2.6:USB HID core driver [ 2.330010] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.330732] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB03, max UDMA/100, ATAPI AN [ 2.331668] ata4.00: configured for UDMA/100 [ 2.350544] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB03 PQ: 0 ANSI: 5 [ 2.354973] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.354975] Uniform CD-ROM driver Revision: 3.20 [ 2.355055] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.355090] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 3.280009] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.285652] ata7.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 3.285654] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.291345] ata7.00: configured for UDMA/133 [ 3.310069] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 [ 3.310173] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.310184] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.310204] sd 6:0:0:0: [sdb] Write Protect is off [ 3.310206] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.310226] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.310312] sdb: sdb1 [ 3.323862] sd 6:0:0:0: [sdb] Attached SCSI disk [ 3.660016] ata8: SATA link down (SStatus 0 SControl 300) [ 3.683801] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.683804] ata3.00: irq_stat 0x40000001 [ 3.683807] ata3.00: failed command: READ FPDMA QUEUED [ 3.683812] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.683813] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.683815] ata3.00: status: { DRDY ERR } [ 3.683820] ata3.00: error: { IDNF ABRT } [ 3.685523] ata3.00: configured for UDMA/133 [ 3.685529] ata3: EH complete [ 3.685668] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.685670] ata3.00: irq_stat 0x40000001 [ 3.685676] ata3.00: failed command: READ FPDMA QUEUED [ 3.685679] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.685680] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.685682] ata3.00: status: { DRDY ERR } [ 3.685683] ata3.00: error: { IDNF ABRT } [ 3.686521] ata3.00: configured for UDMA/133 [ 3.686526] ata3: EH complete [ 3.686663] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.686665] ata3.00: irq_stat 0x40000001 [ 3.686667] ata3.00: failed command: READ FPDMA QUEUED [ 3.686670] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.686671] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.686672] ata3.00: status: { DRDY ERR } [ 3.686674] ata3.00: error: { IDNF ABRT } [ 3.688580] ata3.00: configured for UDMA/133 [ 3.688587] ata3: EH complete [ 3.688727] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.688728] ata3.00: irq_stat 0x40000001 [ 3.688730] ata3.00: failed command: READ FPDMA QUEUED [ 3.688733] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.688734] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.688735] ata3.00: status: { DRDY ERR } [ 3.688737] ata3.00: error: { IDNF ABRT } [ 3.691633] ata3.00: configured for UDMA/133 [ 3.691639] ata3: EH complete [ 3.691771] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.691773] ata3.00: irq_stat 0x40000001 [ 3.691776] ata3.00: failed command: READ FPDMA QUEUED [ 3.691781] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.691782] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.691784] ata3.00: status: { DRDY ERR } [ 3.691786] ata3.00: error: { IDNF ABRT } [ 3.693516] ata3.00: configured for UDMA/133 [ 3.693521] ata3: EH complete [ 3.693652] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.693654] ata3.00: irq_stat 0x40000001 [ 3.693656] ata3.00: failed command: READ FPDMA QUEUED [ 3.693660] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.693661] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.693663] ata3.00: status: { DRDY ERR } [ 3.693665] ata3.00: error: { IDNF ABRT } [ 3.694500] ata3.00: configured for UDMA/133 [ 3.694505] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.694508] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.694512] Descriptor sense data with sense descriptors (in hex): [ 3.694514] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.694522] 03 ba 2e 00 [ 3.694525] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.694528] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e 00 00 00 08 00 [ 3.694536] end_request: I/O error, dev sda, sector 62533120 [ 3.694538] Buffer I/O error on device sda, logical block 7816640 [ 3.694548] ata3: EH complete [ 3.694686] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.694688] ata3.00: irq_stat 0x40000001 [ 3.694690] ata3.00: failed command: READ FPDMA QUEUED [ 3.694694] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.694695] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.694697] ata3.00: status: { DRDY ERR } [ 3.694699] ata3.00: error: { IDNF ABRT } [ 3.695205] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input3 [ 3.695266] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1a.1-1/input0 [ 3.696538] ata3.00: configured for UDMA/133 [ 3.696543] ata3: EH complete [ 3.696677] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.696679] ata3.00: irq_stat 0x40000001 [ 3.696682] ata3.00: failed command: READ FPDMA QUEUED [ 3.696686] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.696687] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.696689] ata3.00: status: { DRDY ERR } [ 3.696691] ata3.00: error: { IDNF ABRT } [ 3.698668] ata3.00: configured for UDMA/133 [ 3.698673] ata3: EH complete [ 3.698805] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.698807] ata3.00: irq_stat 0x40000001 [ 3.698809] ata3.00: failed command: READ FPDMA QUEUED [ 3.698814] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.698815] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.698817] ata3.00: status: { DRDY ERR } [ 3.698819] ata3.00: error: { IDNF ABRT } [ 3.699958] ata3.00: configured for UDMA/133 [ 3.699962] ata3: EH complete [ 3.700093] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.700096] ata3.00: irq_stat 0x40000001 [ 3.700098] ata3.00: failed command: READ FPDMA QUEUED [ 3.700102] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.700103] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.700105] ata3.00: status: { DRDY ERR } [ 3.700107] ata3.00: error: { IDNF ABRT } [ 3.700941] ata3.00: configured for UDMA/133 [ 3.700946] ata3: EH complete [ 3.701079] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.701081] ata3.00: irq_stat 0x40000001 [ 3.701083] ata3.00: failed command: READ FPDMA QUEUED [ 3.701087] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.701088] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.701091] ata3.00: status: { DRDY ERR } [ 3.701092] ata3.00: error: { IDNF ABRT } [ 3.702961] ata3.00: configured for UDMA/133 [ 3.702965] ata3: EH complete [ 3.703096] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.703098] ata3.00: irq_stat 0x40000001 [ 3.703100] ata3.00: failed command: READ FPDMA QUEUED [ 3.703105] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.703106] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.703108] ata3.00: status: { DRDY ERR } [ 3.703110] ata3.00: error: { IDNF ABRT } [ 3.705055] ata3.00: configured for UDMA/133 [ 3.705060] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.705064] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.705068] Descriptor sense data with sense descriptors (in hex): [ 3.705070] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.705077] 03 ba 2e 00 [ 3.705081] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.705084] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e 00 00 00 08 00 [ 3.705091] end_request: I/O error, dev sda, sector 62533120 [ 3.705094] Buffer I/O error on device sda, logical block 7816640 [ 3.705103] ata3: EH complete [ 3.705249] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.705251] ata3.00: irq_stat 0x40000001 [ 3.705253] ata3.00: failed command: READ FPDMA QUEUED [ 3.705257] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.705258] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.705261] ata3.00: status: { DRDY ERR } [ 3.705262] ata3.00: error: { IDNF ABRT } [ 3.706364] ata3.00: configured for UDMA/133 [ 3.706368] ata3: EH complete [ 3.706501] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.706503] ata3.00: irq_stat 0x40000001 [ 3.706505] ata3.00: failed command: READ FPDMA QUEUED [ 3.706510] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.706510] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.706513] ata3.00: status: { DRDY ERR } [ 3.706514] ata3.00: error: { IDNF ABRT } [ 3.707347] ata3.00: configured for UDMA/133 [ 3.707351] ata3: EH complete [ 3.707486] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.707488] ata3.00: irq_stat 0x40000001 [ 3.707490] ata3.00: failed command: READ FPDMA QUEUED [ 3.707495] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.707496] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.707498] ata3.00: status: { DRDY ERR } [ 3.707499] ata3.00: error: { IDNF ABRT } [ 3.709281] ata3.00: configured for UDMA/133 [ 3.709285] ata3: EH complete [ 3.709417] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.709419] ata3.00: irq_stat 0x40000001 [ 3.709421] ata3.00: failed command: READ FPDMA QUEUED [ 3.709425] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.709426] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.709429] ata3.00: status: { DRDY ERR } [ 3.709430] ata3.00: error: { IDNF ABRT } [ 3.711402] ata3.00: configured for UDMA/133 [ 3.711407] ata3: EH complete [ 3.711538] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.711540] ata3.00: irq_stat 0x40000001 [ 3.711542] ata3.00: failed command: READ FPDMA QUEUED [ 3.711547] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.711548] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.711550] ata3.00: status: { DRDY ERR } [ 3.711552] ata3.00: error: { IDNF ABRT } [ 3.712591] ata3.00: configured for UDMA/133 [ 3.712596] ata3: EH complete [ 3.712728] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.712730] ata3.00: irq_stat 0x40000001 [ 3.712732] ata3.00: failed command: READ FPDMA QUEUED [ 3.712736] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.712737] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.712739] ata3.00: status: { DRDY ERR } [ 3.712741] ata3.00: error: { IDNF ABRT } [ 3.713576] ata3.00: configured for UDMA/133 [ 3.713580] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.713583] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.713586] Descriptor sense data with sense descriptors (in hex): [ 3.713588] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.713596] 03 ba 2e a0 [ 3.713599] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.713602] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a0 00 00 08 00 [ 3.713609] end_request: I/O error, dev sda, sector 62533280 [ 3.713612] Buffer I/O error on device sda, logical block 7816660 [ 3.713622] ata3: EH complete [ 3.713759] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.713761] ata3.00: irq_stat 0x40000001 [ 3.713764] ata3.00: failed command: READ FPDMA QUEUED [ 3.713768] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.713769] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.713771] ata3.00: status: { DRDY ERR } [ 3.713773] ata3.00: error: { IDNF ABRT } [ 3.715668] ata3.00: configured for UDMA/133 [ 3.715673] ata3: EH complete [ 3.715805] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.715808] ata3.00: irq_stat 0x40000001 [ 3.715810] ata3.00: failed command: READ FPDMA QUEUED [ 3.715814] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.715815] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.715817] ata3.00: status: { DRDY ERR } [ 3.715819] ata3.00: error: { IDNF ABRT } [ 3.717788] ata3.00: configured for UDMA/133 [ 3.717793] ata3: EH complete [ 3.717923] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.717925] ata3.00: irq_stat 0x40000001 [ 3.717927] ata3.00: failed command: READ FPDMA QUEUED [ 3.717931] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.717932] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.717935] ata3.00: status: { DRDY ERR } [ 3.717936] ata3.00: error: { IDNF ABRT } [ 3.719020] ata3.00: configured for UDMA/133 [ 3.719025] ata3: EH complete [ 3.719159] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.719161] ata3.00: irq_stat 0x40000001 [ 3.719163] ata3.00: failed command: READ FPDMA QUEUED [ 3.719168] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.719169] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.719171] ata3.00: status: { DRDY ERR } [ 3.719173] ata3.00: error: { IDNF ABRT } [ 3.720006] ata3.00: configured for UDMA/133 [ 3.720010] ata3: EH complete [ 3.720141] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.720143] ata3.00: irq_stat 0x40000001 [ 3.720145] ata3.00: failed command: READ FPDMA QUEUED [ 3.720149] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.720150] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.720152] ata3.00: status: { DRDY ERR } [ 3.720154] ata3.00: error: { IDNF ABRT } [ 3.721985] ata3.00: configured for UDMA/133 [ 3.721989] ata3: EH complete [ 3.722120] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.722122] ata3.00: irq_stat 0x40000001 [ 3.722124] ata3.00: failed command: READ FPDMA QUEUED [ 3.722129] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.722130] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.722132] ata3.00: status: { DRDY ERR } [ 3.722134] ata3.00: error: { IDNF ABRT } [ 3.724095] ata3.00: configured for UDMA/133 [ 3.724099] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.724102] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.724106] Descriptor sense data with sense descriptors (in hex): [ 3.724107] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.724115] 03 ba 2e a0 [ 3.724118] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.724127] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a0 00 00 08 00 [ 3.724132] end_request: I/O error, dev sda, sector 62533280 [ 3.724134] Buffer I/O error on device sda, logical block 7816660 [ 3.724141] ata3: EH complete [ 3.724403] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.724405] ata3.00: irq_stat 0x40000001 [ 3.724407] ata3.00: failed command: READ FPDMA QUEUED [ 3.724412] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.724413] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.724415] ata3.00: status: { DRDY ERR } [ 3.724417] ata3.00: error: { IDNF ABRT } [ 3.726151] ata3.00: configured for UDMA/133 [ 3.726155] ata3: EH complete [ 3.726285] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.726287] ata3.00: irq_stat 0x40000001 [ 3.726289] ata3.00: failed command: READ FPDMA QUEUED [ 3.726294] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.726295] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.726297] ata3.00: status: { DRDY ERR } [ 3.726299] ata3.00: error: { IDNF ABRT } [ 3.727127] ata3.00: configured for UDMA/133 [ 3.727131] ata3: EH complete [ 3.727262] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.727264] ata3.00: irq_stat 0x40000001 [ 3.727266] ata3.00: failed command: READ FPDMA QUEUED [ 3.727270] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.727271] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.727273] ata3.00: status: { DRDY ERR } [ 3.727275] ata3.00: error: { IDNF ABRT } [ 3.729122] ata3.00: configured for UDMA/133 [ 3.729127] ata3: EH complete [ 3.729257] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.729259] ata3.00: irq_stat 0x40000001 [ 3.729262] ata3.00: failed command: READ FPDMA QUEUED [ 3.729266] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.729267] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.729269] ata3.00: status: { DRDY ERR } [ 3.729271] ata3.00: error: { IDNF ABRT } [ 3.732093] ata3.00: configured for UDMA/133 [ 3.732098] ata3: EH complete [ 3.732232] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.732234] ata3.00: irq_stat 0x40000001 [ 3.732236] ata3.00: failed command: READ FPDMA QUEUED [ 3.732241] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.732241] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.732244] ata3.00: status: { DRDY ERR } [ 3.732245] ata3.00: error: { IDNF ABRT } [ 3.734027] ata3.00: configured for UDMA/133 [ 3.734031] ata3: EH complete [ 3.734162] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.734164] ata3.00: irq_stat 0x40000001 [ 3.734166] ata3.00: failed command: READ FPDMA QUEUED [ 3.734170] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.734171] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.734173] ata3.00: status: { DRDY ERR } [ 3.734175] ata3.00: error: { IDNF ABRT } [ 3.735004] ata3.00: configured for UDMA/133 [ 3.735008] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.735011] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.735015] Descriptor sense data with sense descriptors (in hex): [ 3.735016] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.735024] 03 ba 2e a8 [ 3.735027] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.735030] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 3.735037] end_request: I/O error, dev sda, sector 62533288 [ 3.735040] Buffer I/O error on device sda, logical block 7816661 [ 3.735047] ata3: EH complete [ 3.735183] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.735185] ata3.00: irq_stat 0x40000001 [ 3.735187] ata3.00: failed command: READ FPDMA QUEUED [ 3.735192] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.735192] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.735195] ata3.00: status: { DRDY ERR } [ 3.735196] ata3.00: error: { IDNF ABRT } [ 3.736993] ata3.00: configured for UDMA/133 [ 3.736998] ata3: EH complete [ 3.737128] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.737130] ata3.00: irq_stat 0x40000001 [ 3.737132] ata3.00: failed command: READ FPDMA QUEUED [ 3.737137] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.737138] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.737140] ata3.00: status: { DRDY ERR } [ 3.737142] ata3.00: error: { IDNF ABRT } [ 3.739165] ata3.00: configured for UDMA/133 [ 3.739169] ata3: EH complete [ 3.739300] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.739302] ata3.00: irq_stat 0x40000001 [ 3.739304] ata3.00: failed command: READ FPDMA QUEUED [ 3.739309] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.739310] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.739312] ata3.00: status: { DRDY ERR } [ 3.739314] ata3.00: error: { IDNF ABRT } [ 3.740400] ata3.00: configured for UDMA/133 [ 3.740405] ata3: EH complete [ 3.740540] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.740542] ata3.00: irq_stat 0x40000001 [ 3.740544] ata3.00: failed command: READ FPDMA QUEUED [ 3.740548] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.740549] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.740551] ata3.00: status: { DRDY ERR } [ 3.740553] ata3.00: error: { IDNF ABRT } [ 3.741386] ata3.00: configured for UDMA/133 [ 3.741390] ata3: EH complete [ 3.741521] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.741523] ata3.00: irq_stat 0x40000001 [ 3.741525] ata3.00: failed command: READ FPDMA QUEUED [ 3.741529] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.741530] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.741533] ata3.00: status: { DRDY ERR } [ 3.741534] ata3.00: error: { IDNF ABRT } [ 3.743367] ata3.00: configured for UDMA/133 [ 3.743372] ata3: EH complete [ 3.743503] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.743505] ata3.00: irq_stat 0x40000001 [ 3.743506] ata3.00: failed command: READ FPDMA QUEUED [ 3.743511] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.743512] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.743514] ata3.00: status: { DRDY ERR } [ 3.743516] ata3.00: error: { IDNF ABRT } [ 3.745540] ata3.00: configured for UDMA/133 [ 3.745546] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.745549] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.745553] Descriptor sense data with sense descriptors (in hex): [ 3.745555] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.745568] 03 ba 2e a8 [ 3.745572] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.745574] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 3.745580] end_request: I/O error, dev sda, sector 62533288 [ 3.745581] Buffer I/O error on device sda, logical block 7816661 [ 3.745587] ata3: EH complete [ 3.745730] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.745732] ata3.00: irq_stat 0x40000001 [ 3.745734] ata3.00: failed command: READ FPDMA QUEUED [ 3.745739] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.745739] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.745742] ata3.00: status: { DRDY ERR } [ 3.745743] ata3.00: error: { IDNF ABRT } [ 3.746835] ata3.00: configured for UDMA/133 [ 3.746839] ata3: EH complete [ 3.746970] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.746972] ata3.00: irq_stat 0x40000001 [ 3.746974] ata3.00: failed command: READ FPDMA QUEUED [ 3.746979] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.746980] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.746982] ata3.00: status: { DRDY ERR } [ 3.746984] ata3.00: error: { IDNF ABRT } [ 3.747813] ata3.00: configured for UDMA/133 [ 3.747818] ata3: EH complete [ 3.747953] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.747955] ata3.00: irq_stat 0x40000001 [ 3.747957] ata3.00: failed command: READ FPDMA QUEUED [ 3.747961] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.747962] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.747965] ata3.00: status: { DRDY ERR } [ 3.747966] ata3.00: error: { IDNF ABRT } [ 3.749803] ata3.00: configured for UDMA/133 [ 3.749808] ata3: EH complete [ 3.749940] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.749942] ata3.00: irq_stat 0x40000001 [ 3.749944] ata3.00: failed command: READ FPDMA QUEUED [ 3.749948] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.749949] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.749951] ata3.00: status: { DRDY ERR } [ 3.749953] ata3.00: error: { IDNF ABRT } [ 3.751971] ata3.00: configured for UDMA/133 [ 3.751976] ata3: EH complete [ 3.752106] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.752108] ata3.00: irq_stat 0x40000001 [ 3.752110] ata3.00: failed command: READ FPDMA QUEUED [ 3.752114] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.752116] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.752118] ata3.00: status: { DRDY ERR } [ 3.752119] ata3.00: error: { IDNF ABRT } [ 3.753208] ata3.00: configured for UDMA/133 [ 3.753213] ata3: EH complete [ 3.753343] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.753345] ata3.00: irq_stat 0x40000001 [ 3.753347] ata3.00: failed command: READ FPDMA QUEUED [ 3.753352] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.753352] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.753355] ata3.00: status: { DRDY ERR } [ 3.753356] ata3.00: error: { IDNF ABRT } [ 3.754185] ata3.00: configured for UDMA/133 [ 3.754190] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.754193] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.754197] Descriptor sense data with sense descriptors (in hex): [ 3.754198] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.754206] 03 ba 2e a8 [ 3.754209] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.754212] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 3.754219] end_request: I/O error, dev sda, sector 62533288 [ 3.754222] Buffer I/O error on device sda, logical block 7816661 [ 3.754231] ata3: EH complete [ 3.754369] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.754372] ata3.00: irq_stat 0x40000001 [ 3.754374] ata3.00: failed command: READ FPDMA QUEUED [ 3.754378] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.754379] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.754381] ata3.00: status: { DRDY ERR } [ 3.754383] ata3.00: error: { IDNF ABRT } [ 3.756280] ata3.00: configured for UDMA/133 [ 3.756284] ata3: EH complete [ 3.756415] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.756417] ata3.00: irq_stat 0x40000001 [ 3.756419] ata3.00: failed command: READ FPDMA QUEUED [ 3.756423] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.756424] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.756427] ata3.00: status: { DRDY ERR } [ 3.756428] ata3.00: error: { IDNF ABRT } [ 3.758401] ata3.00: configured for UDMA/133 [ 3.758405] ata3: EH complete [ 3.758536] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.758538] ata3.00: irq_stat 0x40000001 [ 3.758540] ata3.00: failed command: READ FPDMA QUEUED [ 3.758544] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.758545] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.758547] ata3.00: status: { DRDY ERR } [ 3.758549] ata3.00: error: { IDNF ABRT } [ 3.759686] ata3.00: configured for UDMA/133 [ 3.759691] ata3: EH complete [ 3.759821] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.759824] ata3.00: irq_stat 0x40000001 [ 3.759826] ata3.00: failed command: READ FPDMA QUEUED [ 3.759830] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.759831] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.759833] ata3.00: status: { DRDY ERR } [ 3.759835] ata3.00: error: { IDNF ABRT } [ 3.760663] ata3.00: configured for UDMA/133 [ 3.760668] ata3: EH complete [ 3.760802] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.760804] ata3.00: irq_stat 0x40000001 [ 3.760806] ata3.00: failed command: READ FPDMA QUEUED [ 3.760810] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.760811] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.760814] ata3.00: status: { DRDY ERR } [ 3.760815] ata3.00: error: { IDNF ABRT } [ 3.762681] ata3.00: configured for UDMA/133 [ 3.762686] ata3: EH complete [ 3.762818] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.762821] ata3.00: irq_stat 0x40000001 [ 3.762823] ata3.00: failed command: READ FPDMA QUEUED [ 3.762827] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.762828] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.762830] ata3.00: status: { DRDY ERR } [ 3.762832] ata3.00: error: { IDNF ABRT } [ 3.764795] ata3.00: configured for UDMA/133 [ 3.764799] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.764802] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.764806] Descriptor sense data with sense descriptors (in hex): [ 3.764807] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.764815] 03 ba 2e a8 [ 3.764818] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.764821] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 3.764828] end_request: I/O error, dev sda, sector 62533288 [ 3.764831] Buffer I/O error on device sda, logical block 7816661 [ 3.764838] ata3: EH complete [ 3.764972] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.764974] ata3.00: irq_stat 0x40000001 [ 3.764976] ata3.00: failed command: READ FPDMA QUEUED [ 3.764981] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.764981] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.764984] ata3.00: status: { DRDY ERR } [ 3.764985] ata3.00: error: { IDNF ABRT } [ 3.766076] ata3.00: configured for UDMA/133 [ 3.766081] ata3: EH complete [ 3.766212] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.766214] ata3.00: irq_stat 0x40000001 [ 3.766216] ata3.00: failed command: READ FPDMA QUEUED [ 3.766220] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.766221] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.766223] ata3.00: status: { DRDY ERR } [ 3.766225] ata3.00: error: { IDNF ABRT } [ 3.767055] ata3.00: configured for UDMA/133 [ 3.767060] ata3: EH complete [ 3.767194] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.767196] ata3.00: irq_stat 0x40000001 [ 3.767198] ata3.00: failed command: READ FPDMA QUEUED [ 3.767203] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.767204] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.767206] ata3.00: status: { DRDY ERR } [ 3.767208] ata3.00: error: { IDNF ABRT } [ 3.769098] ata3.00: configured for UDMA/133 [ 3.769103] ata3: EH complete [ 3.769233] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.769235] ata3.00: irq_stat 0x40000001 [ 3.769237] ata3.00: failed command: READ FPDMA QUEUED [ 3.769242] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.769243] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.769245] ata3.00: status: { DRDY ERR } [ 3.769246] ata3.00: error: { IDNF ABRT } [ 3.771214] ata3.00: configured for UDMA/133 [ 3.771219] ata3: EH complete [ 3.771355] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.771358] ata3.00: irq_stat 0x40000001 [ 3.771360] ata3.00: failed command: READ FPDMA QUEUED [ 3.771364] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.771365] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.771372] ata3.00: status: { DRDY ERR } [ 3.771374] ata3.00: error: { IDNF ABRT } [ 3.772462] ata3.00: configured for UDMA/133 [ 3.772467] ata3: EH complete [ 3.772597] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.772599] ata3.00: irq_stat 0x40000001 [ 3.772601] ata3.00: failed command: READ FPDMA QUEUED [ 3.772606] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.772606] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.772609] ata3.00: status: { DRDY ERR } [ 3.772610] ata3.00: error: { IDNF ABRT } [ 3.773392] ata3.00: configured for UDMA/133 [ 3.773396] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.773399] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.773402] Descriptor sense data with sense descriptors (in hex): [ 3.773404] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.773412] 03 ba 2e a8 [ 3.773415] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.773418] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 3.773425] end_request: I/O error, dev sda, sector 62533288 [ 3.773427] Buffer I/O error on device sda, logical block 7816661 [ 3.773434] ata3: EH complete [ 3.773569] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.773571] ata3.00: irq_stat 0x40000001 [ 3.773573] ata3.00: failed command: READ FPDMA QUEUED [ 3.773577] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.773578] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.773580] ata3.00: status: { DRDY ERR } [ 3.773582] ata3.00: error: { IDNF ABRT } [ 3.775479] ata3.00: configured for UDMA/133 [ 3.775484] ata3: EH complete [ 3.775617] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.775619] ata3.00: irq_stat 0x40000001 [ 3.775621] ata3.00: failed command: READ FPDMA QUEUED [ 3.775625] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.775626] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.775628] ata3.00: status: { DRDY ERR } [ 3.775630] ata3.00: error: { IDNF ABRT } [ 3.777654] ata3.00: configured for UDMA/133 [ 3.777659] ata3: EH complete [ 3.777789] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.777791] ata3.00: irq_stat 0x40000001 [ 3.777792] ata3.00: failed command: READ FPDMA QUEUED [ 3.777797] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.777798] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.777800] ata3.00: status: { DRDY ERR } [ 3.777802] ata3.00: error: { IDNF ABRT } [ 3.778935] ata3.00: configured for UDMA/133 [ 3.778939] ata3: EH complete [ 3.779069] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.779071] ata3.00: irq_stat 0x40000001 [ 3.779073] ata3.00: failed command: READ FPDMA QUEUED [ 3.779078] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.779079] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.779081] ata3.00: status: { DRDY ERR } [ 3.779082] ata3.00: error: { IDNF ABRT } [ 3.779915] ata3.00: configured for UDMA/133 [ 3.779920] ata3: EH complete [ 3.780050] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.780053] ata3.00: irq_stat 0x40000001 [ 3.780055] ata3.00: failed command: READ FPDMA QUEUED [ 3.780059] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.780060] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.780062] ata3.00: status: { DRDY ERR } [ 3.780064] ata3.00: error: { IDNF ABRT } [ 3.781911] ata3.00: configured for UDMA/133 [ 3.781917] ata3: EH complete [ 3.782053] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.782055] ata3.00: irq_stat 0x40000001 [ 3.782057] ata3.00: failed command: READ FPDMA QUEUED [ 3.782061] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.782062] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.782064] ata3.00: status: { DRDY ERR } [ 3.782066] ata3.00: error: { IDNF ABRT } [ 3.783940] ata3.00: configured for UDMA/133 [ 3.783944] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.783947] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.783950] Descriptor sense data with sense descriptors (in hex): [ 3.783952] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.783960] 03 ba 2e a8 [ 3.783963] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.783966] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 3.783973] end_request: I/O error, dev sda, sector 62533288 [ 3.783980] ata3: EH complete [ 3.784117] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.784119] ata3.00: irq_stat 0x40000001 [ 3.784121] ata3.00: failed command: READ FPDMA QUEUED [ 3.784126] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.784127] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.784129] ata3.00: status: { DRDY ERR } [ 3.784131] ata3.00: error: { IDNF ABRT } [ 3.785263] ata3.00: configured for UDMA/133 [ 3.785267] ata3: EH complete [ 3.785398] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.785400] ata3.00: irq_stat 0x40000001 [ 3.785402] ata3.00: failed command: READ FPDMA QUEUED [ 3.785406] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.785407] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.785409] ata3.00: status: { DRDY ERR } [ 3.785411] ata3.00: error: { IDNF ABRT } [ 3.786199] ata3.00: configured for UDMA/133 [ 3.786204] ata3: EH complete [ 3.786336] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.786338] ata3.00: irq_stat 0x40000001 [ 3.786341] ata3.00: failed command: READ FPDMA QUEUED [ 3.786345] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.786346] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.786348] ata3.00: status: { DRDY ERR } [ 3.786350] ata3.00: error: { IDNF ABRT } [ 3.786976] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor [ 3.788187] ata3.00: configured for UDMA/133 [ 3.788192] ata3: EH complete [ 3.788321] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.788323] ata3.00: irq_stat 0x40000001 [ 3.788325] ata3.00: failed command: READ FPDMA QUEUED [ 3.788330] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.788331] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.788333] ata3.00: status: { DRDY ERR } [ 3.788335] ata3.00: error: { IDNF ABRT } [ 3.790316] ata3.00: configured for UDMA/133 [ 3.790321] ata3: EH complete [ 3.790455] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.790457] ata3.00: irq_stat 0x40000001 [ 3.790458] ata3.00: failed command: READ FPDMA QUEUED [ 3.790462] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.790463] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.790465] ata3.00: status: { DRDY ERR } [ 3.790466] ata3.00: error: { IDNF ABRT } [ 3.791573] ata3.00: configured for UDMA/133 [ 3.791580] ata3: EH complete [ 3.791717] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.791720] ata3.00: irq_stat 0x40000001 [ 3.791726] ata3.00: failed command: READ FPDMA QUEUED [ 3.791729] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.791730] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.791732] ata3.00: status: { DRDY ERR } [ 3.791733] ata3.00: error: { IDNF ABRT } [ 3.792568] ata3.00: configured for UDMA/133 [ 3.792571] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.792574] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.792577] Descriptor sense data with sense descriptors (in hex): [ 3.792578] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.792584] 03 ba 2e a8 [ 3.792586] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.792588] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 3.792594] end_request: I/O error, dev sda, sector 62533288 [ 3.792601] ata3: EH complete [ 3.792735] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.792737] ata3.00: irq_stat 0x40000001 [ 3.792739] ata3.00: failed command: READ FPDMA QUEUED [ 3.792742] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.792743] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.792745] ata3.00: status: { DRDY ERR } [ 3.792746] ata3.00: error: { IDNF ABRT } [ 3.794641] ata3.00: configured for UDMA/133 [ 3.794644] ata3: EH complete [ 3.794784] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.794786] ata3.00: irq_stat 0x40000001 [ 3.794788] ata3.00: failed command: READ FPDMA QUEUED [ 3.794791] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.794791] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.794793] ata3.00: status: { DRDY ERR } [ 3.794794] ata3.00: error: { IDNF ABRT } [ 3.796706] ata3.00: configured for UDMA/133 [ 3.796715] ata3: EH complete [ 3.796854] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.796855] ata3.00: irq_stat 0x40000001 [ 3.796857] ata3.00: failed command: READ FPDMA QUEUED [ 3.796860] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.796864] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.796866] ata3.00: status: { DRDY ERR } [ 3.796867] ata3.00: error: { IDNF ABRT } [ 3.797964] ata3.00: configured for UDMA/133 [ 3.797969] ata3: EH complete [ 3.798102] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.798105] ata3.00: irq_stat 0x40000001 [ 3.798107] ata3.00: failed command: READ FPDMA QUEUED [ 3.798112] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.798113] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.798115] ata3.00: status: { DRDY ERR } [ 3.798121] ata3.00: error: { IDNF ABRT } [ 3.798952] ata3.00: configured for UDMA/133 [ 3.798957] ata3: EH complete [ 3.799089] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.799091] ata3.00: irq_stat 0x40000001 [ 3.799093] ata3.00: failed command: READ FPDMA QUEUED [ 3.799098] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.799099] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.799101] ata3.00: status: { DRDY ERR } [ 3.799103] ata3.00: error: { IDNF ABRT } [ 3.800894] ata3.00: configured for UDMA/133 [ 3.800898] ata3: EH complete [ 3.801032] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.801034] ata3.00: irq_stat 0x40000001 [ 3.801036] ata3.00: failed command: READ FPDMA QUEUED [ 3.801040] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.801042] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.801044] ata3.00: status: { DRDY ERR } [ 3.801045] ata3.00: error: { IDNF ABRT } [ 3.803009] ata3.00: configured for UDMA/133 [ 3.803014] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.803017] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.803021] Descriptor sense data with sense descriptors (in hex): [ 3.803023] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.803031] 03 ba 2e 70 [ 3.803037] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.803040] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e 70 00 00 08 00 [ 3.803049] end_request: I/O error, dev sda, sector 62533232 [ 3.803061] ata3: EH complete [ 3.803202] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.803205] ata3.00: irq_stat 0x40000001 [ 3.803207] ata3.00: failed command: READ FPDMA QUEUED [ 3.803211] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.803212] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.803214] ata3.00: status: { DRDY ERR } [ 3.803216] ata3.00: error: { IDNF ABRT } [ 3.804302] ata3.00: configured for UDMA/133 [ 3.804307] ata3: EH complete [ 3.804439] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.804441] ata3.00: irq_stat 0x40000001 [ 3.804443] ata3.00: failed command: READ FPDMA QUEUED [ 3.804448] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.804449] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.804451] ata3.00: status: { DRDY ERR } [ 3.804453] ata3.00: error: { IDNF ABRT } [ 3.805285] ata3.00: configured for UDMA/133 [ 3.805289] ata3: EH complete [ 3.805420] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.805422] ata3.00: irq_stat 0x40000001 [ 3.805424] ata3.00: failed command: READ FPDMA QUEUED [ 3.805429] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.805430] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.805432] ata3.00: status: { DRDY ERR } [ 3.805434] ata3.00: error: { IDNF ABRT } [ 3.807329] ata3.00: configured for UDMA/133 [ 3.807334] ata3: EH complete [ 3.807466] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.807468] ata3.00: irq_stat 0x40000001 [ 3.807470] ata3.00: failed command: READ FPDMA QUEUED [ 3.807474] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.807475] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.807478] ata3.00: status: { DRDY ERR } [ 3.807479] ata3.00: error: { IDNF ABRT } [ 3.809407] ata3.00: configured for UDMA/133 [ 3.809412] ata3: EH complete [ 3.809545] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.809547] ata3.00: irq_stat 0x40000001 [ 3.809549] ata3.00: failed command: READ FPDMA QUEUED [ 3.809553] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.809554] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.809556] ata3.00: status: { DRDY ERR } [ 3.809558] ata3.00: error: { IDNF ABRT } [ 3.810646] ata3.00: configured for UDMA/133 [ 3.810650] ata3: EH complete [ 3.810781] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.810783] ata3.00: irq_stat 0x40000001 [ 3.810785] ata3.00: failed command: READ FPDMA QUEUED [ 3.810790] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.810791] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.810793] ata3.00: status: { DRDY ERR } [ 3.810795] ata3.00: error: { IDNF ABRT } [ 3.811579] ata3.00: configured for UDMA/133 [ 3.811584] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.811587] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.811591] Descriptor sense data with sense descriptors (in hex): [ 3.811592] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.811600] 03 ba 2e a0 [ 3.811603] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.811606] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a0 00 00 08 00 [ 3.811614] end_request: I/O error, dev sda, sector 62533280 [ 3.811623] ata3: EH complete [ 3.811765] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.811767] ata3.00: irq_stat 0x40000001 [ 3.811769] ata3.00: failed command: READ FPDMA QUEUED [ 3.811774] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.811775] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.811777] ata3.00: status: { DRDY ERR } [ 3.811778] ata3.00: error: { IDNF ABRT } [ 3.813564] ata3.00: configured for UDMA/133 [ 3.813568] ata3: EH complete [ 3.813701] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.813703] ata3.00: irq_stat 0x40000001 [ 3.813705] ata3.00: failed command: READ FPDMA QUEUED [ 3.813710] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.813710] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.813713] ata3.00: status: { DRDY ERR } [ 3.813714] ata3.00: error: { IDNF ABRT } [ 3.815689] ata3.00: configured for UDMA/133 [ 3.815694] ata3: EH complete [ 3.815824] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.815827] ata3.00: irq_stat 0x40000001 [ 3.815829] ata3.00: failed command: READ FPDMA QUEUED [ 3.815833] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.815834] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.815836] ata3.00: status: { DRDY ERR } [ 3.815838] ata3.00: error: { IDNF ABRT } [ 3.816926] ata3.00: configured for UDMA/133 [ 3.816931] ata3: EH complete [ 3.817123] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.817125] ata3.00: irq_stat 0x40000001 [ 3.817127] ata3.00: failed command: READ FPDMA QUEUED [ 3.817132] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.817133] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.817135] ata3.00: status: { DRDY ERR } [ 3.817137] ata3.00: error: { IDNF ABRT } [ 3.817966] ata3.00: configured for UDMA/133 [ 3.817971] ata3: EH complete [ 3.818103] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.818105] ata3.00: irq_stat 0x40000001 [ 3.818107] ata3.00: failed command: READ FPDMA QUEUED [ 3.818111] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.818112] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.818115] ata3.00: status: { DRDY ERR } [ 3.818116] ata3.00: error: { IDNF ABRT } [ 3.820008] ata3.00: configured for UDMA/133 [ 3.820012] ata3: EH complete [ 3.820144] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.820146] ata3.00: irq_stat 0x40000001 [ 3.820148] ata3.00: failed command: READ FPDMA QUEUED [ 3.820152] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.820153] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.820156] ata3.00: status: { DRDY ERR } [ 3.820157] ata3.00: error: { IDNF ABRT } [ 3.822129] ata3.00: configured for UDMA/133 [ 3.822133] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.822137] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.822140] Descriptor sense data with sense descriptors (in hex): [ 3.822142] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.822150] 03 ba 2e a8 [ 3.822153] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.822156] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 3.822163] end_request: I/O error, dev sda, sector 62533288 [ 3.822172] ata3: EH complete [ 3.822311] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.822313] ata3.00: irq_stat 0x40000001 [ 3.822315] ata3.00: failed command: READ FPDMA QUEUED [ 3.822319] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.822320] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.822322] ata3.00: status: { DRDY ERR } [ 3.822324] ata3.00: error: { IDNF ABRT } [ 3.823410] ata3.00: configured for UDMA/133 [ 3.823414] ata3: EH complete [ 3.823545] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.823547] ata3.00: irq_stat 0x40000001 [ 3.823549] ata3.00: failed command: READ FPDMA QUEUED [ 3.823553] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.823554] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.823557] ata3.00: status: { DRDY ERR } [ 3.823558] ata3.00: error: { IDNF ABRT } [ 3.824390] ata3.00: configured for UDMA/133 [ 3.824395] ata3: EH complete [ 3.824527] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.824529] ata3.00: irq_stat 0x40000001 [ 3.824531] ata3.00: failed command: READ FPDMA QUEUED [ 3.824536] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.824537] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.824539] ata3.00: status: { DRDY ERR } [ 3.824541] ata3.00: error: { IDNF ABRT } [ 3.826375] ata3.00: configured for UDMA/133 [ 3.826380] ata3: EH complete [ 3.826513] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.826515] ata3.00: irq_stat 0x40000001 [ 3.826517] ata3.00: failed command: READ FPDMA QUEUED [ 3.826521] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.826522] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.826524] ata3.00: status: { DRDY ERR } [ 3.826526] ata3.00: error: { IDNF ABRT } [ 3.828444] ata3.00: configured for UDMA/133 [ 3.828448] ata3: EH complete [ 3.828579] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.828581] ata3.00: irq_stat 0x40000001 [ 3.828583] ata3.00: failed command: READ FPDMA QUEUED [ 3.828587] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.828588] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.828591] ata3.00: status: { DRDY ERR } [ 3.828592] ata3.00: error: { IDNF ABRT } [ 3.829686] ata3.00: configured for UDMA/133 [ 3.829691] ata3: EH complete [ 3.829821] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.829823] ata3.00: irq_stat 0x40000001 [ 3.829825] ata3.00: failed command: READ FPDMA QUEUED [ 3.829830] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.829831] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.829833] ata3.00: status: { DRDY ERR } [ 3.829835] ata3.00: error: { IDNF ABRT } [ 3.830663] ata3.00: configured for UDMA/133 [ 3.830668] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.830671] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.830674] Descriptor sense data with sense descriptors (in hex): [ 3.830676] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.830684] 03 ba 2e a8 [ 3.830687] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.830690] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 3.830697] end_request: I/O error, dev sda, sector 62533288 [ 3.830705] ata3: EH complete [ 3.830850] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.830852] ata3.00: irq_stat 0x40000001 [ 3.830854] ata3.00: failed command: READ FPDMA QUEUED [ 3.830858] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.830859] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.830861] ata3.00: status: { DRDY ERR } [ 3.830863] ata3.00: error: { IDNF ABRT } [ 3.832759] ata3.00: configured for UDMA/133 [ 3.832764] ata3: EH complete [ 3.832896] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.832899] ata3.00: irq_stat 0x40000001 [ 3.832901] ata3.00: failed command: READ FPDMA QUEUED [ 3.832905] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.832906] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.832908] ata3.00: status: { DRDY ERR } [ 3.832910] ata3.00: error: { IDNF ABRT } [ 3.834816] ata3.00: configured for UDMA/133 [ 3.834820] ata3: EH complete [ 3.834953] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.834955] ata3.00: irq_stat 0x40000001 [ 3.834957] ata3.00: failed command: READ FPDMA QUEUED [ 3.834961] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.834962] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.834965] ata3.00: status: { DRDY ERR } [ 3.834966] ata3.00: error: { IDNF ABRT } [ 3.835113] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input4 [ 3.835194] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1a.1-1/input1 [ 3.836077] ata3.00: configured for UDMA/133 [ 3.836081] ata3: EH complete [ 3.836216] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.836218] ata3.00: irq_stat 0x40000001 [ 3.836220] ata3.00: failed command: READ FPDMA QUEUED [ 3.836225] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.836226] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.836228] ata3.00: status: { DRDY ERR } [ 3.836230] ata3.00: error: { IDNF ABRT } [ 3.837060] ata3.00: configured for UDMA/133 [ 3.837065] ata3: EH complete [ 3.837199] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.837202] ata3.00: irq_stat 0x40000001 [ 3.837204] ata3.00: failed command: READ FPDMA QUEUED [ 3.837209] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.837210] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.837212] ata3.00: status: { DRDY ERR } [ 3.837217] ata3.00: error: { IDNF ABRT } [ 3.838980] ata3.00: configured for UDMA/133 [ 3.838986] ata3: EH complete [ 3.839117] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 3.839120] ata3.00: irq_stat 0x40000001 [ 3.839122] ata3.00: failed command: READ FPDMA QUEUED [ 3.839126] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 3.839127] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 3.839129] ata3.00: status: { DRDY ERR } [ 3.839131] ata3.00: error: { IDNF ABRT } [ 3.841105] ata3.00: configured for UDMA/133 [ 3.841110] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.841113] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.841117] Descriptor sense data with sense descriptors (in hex): [ 3.841119] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.841126] 03 ba 2e a8 [ 3.841129] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 3.841133] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 3.841140] end_request: I/O error, dev sda, sector 62533288 [ 3.841149] ata3: EH complete [ 4.176825] EXT4-fs (loop0): mounted filesystem with ordered data mode [ 5.916153] udev: starting version 151 [ 6.302659] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.302707] ata3.00: irq_stat 0x40000001 [ 6.302745] ata3.00: failed command: READ FPDMA QUEUED [ 6.302786] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.302787] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.302872] ata3.00: status: { DRDY ERR } [ 6.302909] ata3.00: error: { IDNF ABRT } [ 6.304817] ata3.00: configured for UDMA/133 [ 6.304823] ata3: EH complete [ 6.304961] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.305008] ata3.00: irq_stat 0x40000001 [ 6.305047] ata3.00: failed command: READ FPDMA QUEUED [ 6.305088] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.305088] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.305173] ata3.00: status: { DRDY ERR } [ 6.305210] ata3.00: error: { IDNF ABRT } [ 6.306867] ata3.00: configured for UDMA/133 [ 6.306875] ata3: EH complete [ 6.307016] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.307058] ata3.00: irq_stat 0x40000001 [ 6.307097] ata3.00: failed command: READ FPDMA QUEUED [ 6.307141] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.307141] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.307243] ata3.00: status: { DRDY ERR } [ 6.307291] ata3.00: error: { IDNF ABRT } [ 6.309286] ata3.00: configured for UDMA/133 [ 6.309291] ata3: EH complete [ 6.309426] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.309480] ata3.00: irq_stat 0x40000001 [ 6.309530] ata3.00: failed command: READ FPDMA QUEUED [ 6.309584] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.309585] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.309719] ata3.00: status: { DRDY ERR } [ 6.309767] ata3.00: error: { IDNF ABRT } [ 6.311518] ata3.00: configured for UDMA/133 [ 6.311523] ata3: EH complete [ 6.311655] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.311710] ata3.00: irq_stat 0x40000001 [ 6.311760] ata3.00: failed command: READ FPDMA QUEUED [ 6.311817] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.311817] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.311947] ata3.00: status: { DRDY ERR } [ 6.311995] ata3.00: error: { IDNF ABRT } [ 6.313901] ata3.00: configured for UDMA/133 [ 6.313907] ata3: EH complete [ 6.314050] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.314110] ata3.00: irq_stat 0x40000001 [ 6.314167] ata3.00: failed command: READ FPDMA QUEUED [ 6.314224] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.314225] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.314369] ata3.00: status: { DRDY ERR } [ 6.314422] ata3.00: error: { IDNF ABRT } [ 6.316151] ata3.00: configured for UDMA/133 [ 6.316156] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.316160] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.316164] Descriptor sense data with sense descriptors (in hex): [ 6.316166] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.316174] 03 ba 2e 00 [ 6.316177] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.316180] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e 00 00 00 08 00 [ 6.316188] end_request: I/O error, dev sda, sector 62533120 [ 6.316241] __ratelimit: 7 callbacks suppressed [ 6.316243] Buffer I/O error on device sda, logical block 7816640 [ 6.316304] ata3: EH complete [ 6.316453] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.316507] ata3.00: irq_stat 0x40000001 [ 6.316559] ata3.00: failed command: READ FPDMA QUEUED [ 6.316612] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.316612] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.316742] ata3.00: status: { DRDY ERR } [ 6.316790] ata3.00: error: { IDNF ABRT } [ 6.317930] ata3.00: configured for UDMA/133 [ 6.317935] ata3: EH complete [ 6.318067] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.318121] ata3.00: irq_stat 0x40000001 [ 6.318171] ata3.00: failed command: READ FPDMA QUEUED [ 6.318226] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.318227] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.318361] ata3.00: status: { DRDY ERR } [ 6.318409] ata3.00: error: { IDNF ABRT } [ 6.319544] ata3.00: configured for UDMA/133 [ 6.319549] ata3: EH complete [ 6.319683] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.319737] ata3.00: irq_stat 0x40000001 [ 6.319787] ata3.00: failed command: READ FPDMA QUEUED [ 6.319841] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.319842] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.319976] ata3.00: status: { DRDY ERR } [ 6.320025] ata3.00: error: { IDNF ABRT } [ 6.321921] ata3.00: configured for UDMA/133 [ 6.321926] ata3: EH complete [ 6.322058] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.322112] ata3.00: irq_stat 0x40000001 [ 6.322162] ata3.00: failed command: READ FPDMA QUEUED [ 6.322218] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.322219] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.322349] ata3.00: status: { DRDY ERR } [ 6.322397] ata3.00: error: { IDNF ABRT } [ 6.324116] ata3.00: configured for UDMA/133 [ 6.324120] ata3: EH complete [ 6.324251] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.324304] ata3.00: irq_stat 0x40000001 [ 6.324354] ata3.00: failed command: READ FPDMA QUEUED [ 6.324410] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.324411] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.324541] ata3.00: status: { DRDY ERR } [ 6.324589] ata3.00: error: { IDNF ABRT } [ 6.325729] ata3.00: configured for UDMA/133 [ 6.325733] ata3: EH complete [ 6.325865] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.325927] ata3.00: irq_stat 0x40000001 [ 6.325979] ata3.00: failed command: READ FPDMA QUEUED [ 6.326036] ata3.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.326036] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.326178] ata3.00: status: { DRDY ERR } [ 6.326230] ata3.00: error: { IDNF ABRT } [ 6.327325] ata3.00: configured for UDMA/133 [ 6.327330] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.327334] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.327338] Descriptor sense data with sense descriptors (in hex): [ 6.327340] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.327347] 03 ba 2e 00 [ 6.327351] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.327354] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e 00 00 00 08 00 [ 6.327362] end_request: I/O error, dev sda, sector 62533120 [ 6.327415] Buffer I/O error on device sda, logical block 7816640 [ 6.327483] ata3: EH complete [ 6.327638] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.327693] ata3.00: irq_stat 0x40000001 [ 6.327745] ata3.00: failed command: READ FPDMA QUEUED [ 6.327797] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.327798] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.327928] ata3.00: status: { DRDY ERR } [ 6.327976] ata3.00: error: { IDNF ABRT } [ 6.329873] ata3.00: configured for UDMA/133 [ 6.329877] ata3: EH complete [ 6.330008] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.330062] ata3.00: irq_stat 0x40000001 [ 6.330119] ata3.00: failed command: READ FPDMA QUEUED [ 6.330176] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.330177] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.330306] ata3.00: status: { DRDY ERR } [ 6.330355] ata3.00: error: { IDNF ABRT } [ 6.332067] ata3.00: configured for UDMA/133 [ 6.332073] ata3: EH complete [ 6.332214] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.332268] ata3.00: irq_stat 0x40000001 [ 6.332322] ata3.00: failed command: READ FPDMA QUEUED [ 6.332374] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.332375] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.332506] ata3.00: status: { DRDY ERR } [ 6.332558] ata3.00: error: { IDNF ABRT } [ 6.333695] ata3.00: configured for UDMA/133 [ 6.333701] ata3: EH complete [ 6.333834] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.333891] ata3.00: irq_stat 0x40000001 [ 6.333940] ata3.00: failed command: READ FPDMA QUEUED [ 6.333992] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.333993] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.334123] ata3.00: status: { DRDY ERR } [ 6.334171] ata3.00: error: { IDNF ABRT } [ 6.335258] ata3.00: configured for UDMA/133 [ 6.335262] ata3: EH complete [ 6.335399] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.335456] ata3.00: irq_stat 0x40000001 [ 6.335504] ata3.00: failed command: READ FPDMA QUEUED [ 6.335556] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.335557] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.335687] ata3.00: status: { DRDY ERR } [ 6.335735] ata3.00: error: { IDNF ABRT } [ 6.337574] ata3.00: configured for UDMA/133 [ 6.337579] ata3: EH complete [ 6.337711] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.337765] ata3.00: irq_stat 0x40000001 [ 6.337816] ata3.00: failed command: READ FPDMA QUEUED [ 6.337870] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.337870] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.338005] ata3.00: status: { DRDY ERR } [ 6.338053] ata3.00: error: { IDNF ABRT } [ 6.339715] ata3.00: configured for UDMA/133 [ 6.339719] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.339722] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.339726] Descriptor sense data with sense descriptors (in hex): [ 6.339728] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.339735] 03 ba 2e a0 [ 6.339738] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.339742] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a0 00 00 08 00 [ 6.339749] end_request: I/O error, dev sda, sector 62533280 [ 6.339805] Buffer I/O error on device sda, logical block 7816660 [ 6.339871] ata3: EH complete [ 6.340025] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.340081] ata3.00: irq_stat 0x40000001 [ 6.340144] ata3.00: failed command: READ FPDMA QUEUED [ 6.340197] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.340198] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.340337] ata3.00: status: { DRDY ERR } [ 6.340387] ata3.00: error: { IDNF ABRT } [ 6.342490] ata3.00: configured for UDMA/133 [ 6.342495] ata3: EH complete [ 6.342629] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.342683] ata3.00: irq_stat 0x40000001 [ 6.342734] ata3.00: failed command: READ FPDMA QUEUED [ 6.342788] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.342789] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.342923] ata3.00: status: { DRDY ERR } [ 6.342971] ata3.00: error: { IDNF ABRT } [ 6.345005] ata3.00: configured for UDMA/133 [ 6.345009] ata3: EH complete [ 6.345140] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.345193] ata3.00: irq_stat 0x40000001 [ 6.345243] ata3.00: failed command: READ FPDMA QUEUED [ 6.345297] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.345298] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.345432] ata3.00: status: { DRDY ERR } [ 6.345480] ata3.00: error: { IDNF ABRT } [ 6.349452] ata3.00: configured for UDMA/133 [ 6.349459] ata3: EH complete [ 6.349599] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.349654] ata3.00: irq_stat 0x40000001 [ 6.349704] ata3.00: failed command: READ FPDMA QUEUED [ 6.349759] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.349760] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.349894] ata3.00: status: { DRDY ERR } [ 6.349942] ata3.00: error: { IDNF ABRT } [ 6.351526] ata3.00: configured for UDMA/133 [ 6.351533] ata3: EH complete [ 6.351670] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.351725] ata3.00: irq_stat 0x40000001 [ 6.351775] ata3.00: failed command: READ FPDMA QUEUED [ 6.351832] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.351832] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.351962] ata3.00: status: { DRDY ERR } [ 6.352010] ata3.00: error: { IDNF ABRT } [ 6.353146] ata3.00: configured for UDMA/133 [ 6.353151] ata3: EH complete [ 6.353288] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.353344] ata3.00: irq_stat 0x40000001 [ 6.353393] ata3.00: failed command: READ FPDMA QUEUED [ 6.353445] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.353446] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.353576] ata3.00: status: { DRDY ERR } [ 6.353624] ata3.00: error: { IDNF ABRT } [ 6.354764] ata3.00: configured for UDMA/133 [ 6.354768] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.354772] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.354776] Descriptor sense data with sense descriptors (in hex): [ 6.354777] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.354785] 03 ba 2e a0 [ 6.354788] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.354791] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a0 00 00 08 00 [ 6.354798] end_request: I/O error, dev sda, sector 62533280 [ 6.354851] Buffer I/O error on device sda, logical block 7816660 [ 6.354923] ata3: EH complete [ 6.355117] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.355171] ata3.00: irq_stat 0x40000001 [ 6.355224] ata3.00: failed command: READ FPDMA QUEUED [ 6.355276] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.355277] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.355407] ata3.00: status: { DRDY ERR } [ 6.355455] ata3.00: error: { IDNF ABRT } [ 6.358639] ata3.00: configured for UDMA/133 [ 6.358643] ata3: EH complete [ 6.358778] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.358832] ata3.00: irq_stat 0x40000001 [ 6.358882] ata3.00: failed command: READ FPDMA QUEUED [ 6.358936] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.358937] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.359071] ata3.00: status: { DRDY ERR } [ 6.359119] ata3.00: error: { IDNF ABRT } [ 6.361804] ata3.00: configured for UDMA/133 [ 6.361809] ata3: EH complete [ 6.361941] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.361995] ata3.00: irq_stat 0x40000001 [ 6.362045] ata3.00: failed command: READ FPDMA QUEUED [ 6.362099] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.362100] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.362234] ata3.00: status: { DRDY ERR } [ 6.362282] ata3.00: error: { IDNF ABRT } [ 6.365258] ata3.00: configured for UDMA/133 [ 6.365262] ata3: EH complete [ 6.365395] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.365449] ata3.00: irq_stat 0x40000001 [ 6.365499] ata3.00: failed command: READ FPDMA QUEUED [ 6.365556] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.365557] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.365687] ata3.00: status: { DRDY ERR } [ 6.365735] ata3.00: error: { IDNF ABRT } [ 6.366585] ata3.00: configured for UDMA/133 [ 6.366594] ata3: EH complete [ 6.366729] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.366783] ata3.00: irq_stat 0x40000001 [ 6.366833] ata3.00: failed command: READ FPDMA QUEUED [ 6.366889] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.366890] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.367020] ata3.00: status: { DRDY ERR } [ 6.367068] ata3.00: error: { IDNF ABRT } [ 6.369238] ata3.00: configured for UDMA/133 [ 6.369243] ata3: EH complete [ 6.369380] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.369433] ata3.00: irq_stat 0x40000001 [ 6.369483] ata3.00: failed command: READ FPDMA QUEUED [ 6.369537] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.369538] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.369672] ata3.00: status: { DRDY ERR } [ 6.369721] ata3.00: error: { IDNF ABRT } [ 6.371611] ata3.00: configured for UDMA/133 [ 6.371616] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.371619] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.371623] Descriptor sense data with sense descriptors (in hex): [ 6.371625] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.371633] 03 ba 2e a8 [ 6.371636] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.371639] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 6.371651] end_request: I/O error, dev sda, sector 62533288 [ 6.371705] Buffer I/O error on device sda, logical block 7816661 [ 6.371760] ata3: EH complete [ 6.371977] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.372031] ata3.00: irq_stat 0x40000001 [ 6.372084] ata3.00: failed command: READ FPDMA QUEUED [ 6.372136] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.372137] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.372267] ata3.00: status: { DRDY ERR } [ 6.372315] ata3.00: error: { IDNF ABRT } [ 6.373457] ata3.00: configured for UDMA/133 [ 6.373462] ata3: EH complete [ 6.373594] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.373651] ata3.00: irq_stat 0x40000001 [ 6.373699] ata3.00: failed command: READ FPDMA QUEUED [ 6.373751] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.373752] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.373882] ata3.00: status: { DRDY ERR } [ 6.373930] ata3.00: error: { IDNF ABRT } [ 6.375024] ata3.00: configured for UDMA/133 [ 6.375029] ata3: EH complete [ 6.375162] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.375216] ata3.00: irq_stat 0x40000001 [ 6.375266] ata3.00: failed command: READ FPDMA QUEUED [ 6.375321] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.375321] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.375455] ata3.00: status: { DRDY ERR } [ 6.375504] ata3.00: error: { IDNF ABRT } [ 6.377615] ata3.00: configured for UDMA/133 [ 6.377620] ata3: EH complete [ 6.377757] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.377811] ata3.00: irq_stat 0x40000001 [ 6.377861] ata3.00: failed command: READ FPDMA QUEUED [ 6.377915] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.377916] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.378050] ata3.00: status: { DRDY ERR } [ 6.378098] ata3.00: error: { IDNF ABRT } [ 6.379986] ata3.00: configured for UDMA/133 [ 6.379990] ata3: EH complete [ 6.380121] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.380178] ata3.00: irq_stat 0x40000001 [ 6.380227] ata3.00: failed command: READ FPDMA QUEUED [ 6.380279] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.380280] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.380410] ata3.00: status: { DRDY ERR } [ 6.380458] ata3.00: error: { IDNF ABRT } [ 6.381648] ata3.00: configured for UDMA/133 [ 6.381653] ata3: EH complete [ 6.381784] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.381838] ata3.00: irq_stat 0x40000001 [ 6.381891] ata3.00: failed command: READ FPDMA QUEUED [ 6.381943] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.381944] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.382074] ata3.00: status: { DRDY ERR } [ 6.382122] ata3.00: error: { IDNF ABRT } [ 6.383260] ata3.00: configured for UDMA/133 [ 6.383265] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.383268] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.383272] Descriptor sense data with sense descriptors (in hex): [ 6.383274] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.383281] 03 ba 2e a8 [ 6.383285] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.383288] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 6.383295] end_request: I/O error, dev sda, sector 62533288 [ 6.383348] Buffer I/O error on device sda, logical block 7816661 [ 6.383413] ata3: EH complete [ 6.383557] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.383611] ata3.00: irq_stat 0x40000001 [ 6.383663] ata3.00: failed command: READ FPDMA QUEUED [ 6.383715] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.383716] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.383849] ata3.00: status: { DRDY ERR } [ 6.383900] ata3.00: error: { IDNF ABRT } [ 6.386017] ata3.00: configured for UDMA/133 [ 6.386021] ata3: EH complete [ 6.386153] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.386207] ata3.00: irq_stat 0x40000001 [ 6.386258] ata3.00: failed command: READ FPDMA QUEUED [ 6.386315] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.386315] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.386445] ata3.00: status: { DRDY ERR } [ 6.386493] ata3.00: error: { IDNF ABRT } [ 6.388326] ata3.00: configured for UDMA/133 [ 6.388330] ata3: EH complete [ 6.388461] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.388518] ata3.00: irq_stat 0x40000001 [ 6.388566] ata3.00: failed command: READ FPDMA QUEUED [ 6.388618] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.388619] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.388749] ata3.00: status: { DRDY ERR } [ 6.388797] ata3.00: error: { IDNF ABRT } [ 6.390038] ata3.00: configured for UDMA/133 [ 6.390043] ata3: EH complete [ 6.390175] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.390230] ata3.00: irq_stat 0x40000001 [ 6.390280] ata3.00: failed command: READ FPDMA QUEUED [ 6.390334] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.390335] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.390469] ata3.00: status: { DRDY ERR } [ 6.390517] ata3.00: error: { IDNF ABRT } [ 6.391705] ata3.00: configured for UDMA/133 [ 6.391709] ata3: EH complete [ 6.391846] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.391900] ata3.00: irq_stat 0x40000001 [ 6.391950] ata3.00: failed command: READ FPDMA QUEUED [ 6.392004] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.392005] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.392139] ata3.00: status: { DRDY ERR } [ 6.392187] ata3.00: error: { IDNF ABRT } [ 6.394419] ata3.00: configured for UDMA/133 [ 6.394424] ata3: EH complete [ 6.394556] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.394610] ata3.00: irq_stat 0x40000001 [ 6.394660] ata3.00: failed command: READ FPDMA QUEUED [ 6.395454] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.395455] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.395585] ata3.00: status: { DRDY ERR } [ 6.395633] ata3.00: error: { IDNF ABRT } [ 6.397522] ata3.00: configured for UDMA/133 [ 6.397526] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.397529] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.397533] Descriptor sense data with sense descriptors (in hex): [ 6.397535] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.397542] 03 ba 2e a8 [ 6.397546] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.397549] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 6.397556] end_request: I/O error, dev sda, sector 62533288 [ 6.397609] Buffer I/O error on device sda, logical block 7816661 [ 6.397668] ata3: EH complete [ 6.397900] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.397954] ata3.00: irq_stat 0x40000001 [ 6.398007] ata3.00: failed command: READ FPDMA QUEUED [ 6.398059] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.398060] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.398190] ata3.00: status: { DRDY ERR } [ 6.398238] ata3.00: error: { IDNF ABRT } [ 6.399431] ata3.00: configured for UDMA/133 [ 6.399436] ata3: EH complete [ 6.399571] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.399636] ata3.00: irq_stat 0x40000001 [ 6.399685] ata3.00: failed command: READ FPDMA QUEUED [ 6.399737] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.399738] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.399868] ata3.00: status: { DRDY ERR } [ 6.399916] ata3.00: error: { IDNF ABRT } [ 6.401060] ata3.00: configured for UDMA/133 [ 6.401065] ata3: EH complete [ 6.401207] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.401261] ata3.00: irq_stat 0x40000001 [ 6.401314] ata3.00: failed command: READ FPDMA QUEUED [ 6.401366] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.401367] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.401500] ata3.00: status: { DRDY ERR } [ 6.401549] ata3.00: error: { IDNF ABRT } [ 6.403718] ata3.00: configured for UDMA/133 [ 6.403723] ata3: EH complete [ 6.403859] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.403913] ata3.00: irq_stat 0x40000001 [ 6.403963] ata3.00: failed command: READ FPDMA QUEUED [ 6.404017] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.404018] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.404152] ata3.00: status: { DRDY ERR } [ 6.404200] ata3.00: error: { IDNF ABRT } [ 6.406091] ata3.00: configured for UDMA/133 [ 6.406095] ata3: EH complete [ 6.406228] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.406286] ata3.00: irq_stat 0x40000001 [ 6.406334] ata3.00: failed command: READ FPDMA QUEUED [ 6.406386] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.406387] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.406517] ata3.00: status: { DRDY ERR } [ 6.406565] ata3.00: error: { IDNF ABRT } [ 6.407805] ata3.00: configured for UDMA/133 [ 6.407810] ata3: EH complete [ 6.407943] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.407997] ata3.00: irq_stat 0x40000001 [ 6.408047] ata3.00: failed command: READ FPDMA QUEUED [ 6.408101] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.408102] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.408236] ata3.00: status: { DRDY ERR } [ 6.408284] ata3.00: error: { IDNF ABRT } [ 6.409422] ata3.00: configured for UDMA/133 [ 6.409427] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.409430] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.409433] Descriptor sense data with sense descriptors (in hex): [ 6.409435] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.409443] 03 ba 2e a8 [ 6.409446] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.409449] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 6.409456] end_request: I/O error, dev sda, sector 62533288 [ 6.409509] Buffer I/O error on device sda, logical block 7816661 [ 6.409574] ata3: EH complete [ 6.409715] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.409769] ata3.00: irq_stat 0x40000001 [ 6.409822] ata3.00: failed command: READ FPDMA QUEUED [ 6.409874] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.409875] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.410004] ata3.00: status: { DRDY ERR } [ 6.410053] ata3.00: error: { IDNF ABRT } [ 6.412228] ata3.00: configured for UDMA/133 [ 6.412232] ata3: EH complete [ 6.412365] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.412419] ata3.00: irq_stat 0x40000001 [ 6.412469] ata3.00: failed command: READ FPDMA QUEUED [ 6.412526] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.412527] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.412656] ata3.00: status: { DRDY ERR } [ 6.412705] ata3.00: error: { IDNF ABRT } [ 6.414543] ata3.00: configured for UDMA/133 [ 6.414547] ata3: EH complete [ 6.414678] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.414734] ata3.00: irq_stat 0x40000001 [ 6.414783] ata3.00: failed command: READ FPDMA QUEUED [ 6.414835] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.414835] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.414965] ata3.00: status: { DRDY ERR } [ 6.415013] ata3.00: error: { IDNF ABRT } [ 6.416204] ata3.00: configured for UDMA/133 [ 6.416209] ata3: EH complete [ 6.416341] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.416395] ata3.00: irq_stat 0x40000001 [ 6.416445] ata3.00: failed command: READ FPDMA QUEUED [ 6.416500] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.416500] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.416634] ata3.00: status: { DRDY ERR } [ 6.416682] ata3.00: error: { IDNF ABRT } [ 6.417821] ata3.00: configured for UDMA/133 [ 6.417826] ata3: EH complete [ 6.417962] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.418016] ata3.00: irq_stat 0x40000001 [ 6.418066] ata3.00: failed command: READ FPDMA QUEUED [ 6.418120] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.418121] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.418255] ata3.00: status: { DRDY ERR } [ 6.418303] ata3.00: error: { IDNF ABRT } [ 6.420429] ata3.00: configured for UDMA/133 [ 6.420433] ata3: EH complete [ 6.420566] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.420620] ata3.00: irq_stat 0x40000001 [ 6.420671] ata3.00: failed command: READ FPDMA QUEUED [ 6.420727] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.420728] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.420858] ata3.00: status: { DRDY ERR } [ 6.420906] ata3.00: error: { IDNF ABRT } [ 6.422798] ata3.00: configured for UDMA/133 [ 6.422802] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.422805] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.422809] Descriptor sense data with sense descriptors (in hex): [ 6.422810] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.422818] 03 ba 2e a8 [ 6.422821] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.422824] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 6.422831] end_request: I/O error, dev sda, sector 62533288 [ 6.422885] Buffer I/O error on device sda, logical block 7816661 [ 6.422944] ata3: EH complete [ 6.423089] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.423143] ata3.00: irq_stat 0x40000001 [ 6.423195] ata3.00: failed command: READ FPDMA QUEUED [ 6.423247] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.423248] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.423377] ata3.00: status: { DRDY ERR } [ 6.423426] ata3.00: error: { IDNF ABRT } [ 6.424622] ata3.00: configured for UDMA/133 [ 6.424627] ata3: EH complete [ 6.424759] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.424813] ata3.00: irq_stat 0x40000001 [ 6.424864] ata3.00: failed command: READ FPDMA QUEUED [ 6.424918] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.424919] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.425053] ata3.00: status: { DRDY ERR } [ 6.425101] ata3.00: error: { IDNF ABRT } [ 6.426314] ata3.00: configured for UDMA/133 [ 6.426318] ata3: EH complete [ 6.426454] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.426507] ata3.00: irq_stat 0x40000001 [ 6.426555] ata3.00: failed command: READ FPDMA QUEUED [ 6.426608] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.426608] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.426738] ata3.00: status: { DRDY ERR } [ 6.426787] ata3.00: error: { IDNF ABRT } [ 6.429022] ata3.00: configured for UDMA/133 [ 6.429025] ata3: EH complete [ 6.429159] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.429216] ata3.00: irq_stat 0x40000001 [ 6.429269] ata3.00: failed command: READ FPDMA QUEUED [ 6.429321] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.429322] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.429452] ata3.00: status: { DRDY ERR } [ 6.429500] ata3.00: error: { IDNF ABRT } [ 6.431396] ata3.00: configured for UDMA/133 [ 6.431400] ata3: EH complete [ 6.431533] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.431591] ata3.00: irq_stat 0x40000001 [ 6.431639] ata3.00: failed command: READ FPDMA QUEUED [ 6.431691] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.431692] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.431822] ata3.00: status: { DRDY ERR } [ 6.431870] ata3.00: error: { IDNF ABRT } [ 6.433067] ata3.00: configured for UDMA/133 [ 6.433072] ata3: EH complete [ 6.433206] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.433260] ata3.00: irq_stat 0x40000001 [ 6.433310] ata3.00: failed command: READ FPDMA QUEUED [ 6.433364] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.433365] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.433499] ata3.00: status: { DRDY ERR } [ 6.433547] ata3.00: error: { IDNF ABRT } [ 6.434696] ata3.00: configured for UDMA/133 [ 6.434700] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.434703] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.434707] Descriptor sense data with sense descriptors (in hex): [ 6.434712] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.434718] 03 ba 2e a8 [ 6.434720] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.434723] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 6.434728] end_request: I/O error, dev sda, sector 62533288 [ 6.434779] Buffer I/O error on device sda, logical block 7816661 [ 6.434834] ata3: EH complete [ 6.434974] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.435028] ata3.00: irq_stat 0x40000001 [ 6.435081] ata3.00: failed command: READ FPDMA QUEUED [ 6.435133] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.435133] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.436002] ata3.00: status: { DRDY ERR } [ 6.436050] ata3.00: error: { IDNF ABRT } [ 6.438167] ata3.00: configured for UDMA/133 [ 6.438172] ata3: EH complete [ 6.438305] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.438359] ata3.00: irq_stat 0x40000001 [ 6.438409] ata3.00: failed command: READ FPDMA QUEUED [ 6.438463] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.438464] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.438598] ata3.00: status: { DRDY ERR } [ 6.438647] ata3.00: error: { IDNF ABRT } [ 6.440479] ata3.00: configured for UDMA/133 [ 6.440484] ata3: EH complete [ 6.440620] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.440674] ata3.00: irq_stat 0x40000001 [ 6.440725] ata3.00: failed command: READ FPDMA QUEUED [ 6.440779] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.440780] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.440914] ata3.00: status: { DRDY ERR } [ 6.440962] ata3.00: error: { IDNF ABRT } [ 6.442152] ata3.00: configured for UDMA/133 [ 6.442157] ata3: EH complete [ 6.442289] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.442343] ata3.00: irq_stat 0x40000001 [ 6.442393] ata3.00: failed command: READ FPDMA QUEUED [ 6.442451] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.442451] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.442581] ata3.00: status: { DRDY ERR } [ 6.442629] ata3.00: error: { IDNF ABRT } [ 6.443766] ata3.00: configured for UDMA/133 [ 6.443770] ata3: EH complete [ 6.443901] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.443957] ata3.00: irq_stat 0x40000001 [ 6.444006] ata3.00: failed command: READ FPDMA QUEUED [ 6.444058] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.444058] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.444188] ata3.00: status: { DRDY ERR } [ 6.444237] ata3.00: error: { IDNF ABRT } [ 6.446411] ata3.00: configured for UDMA/133 [ 6.446416] ata3: EH complete [ 6.446548] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.446602] ata3.00: irq_stat 0x40000001 [ 6.446652] ata3.00: failed command: READ FPDMA QUEUED [ 6.446706] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.446707] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.446841] ata3.00: status: { DRDY ERR } [ 6.446890] ata3.00: error: { IDNF ABRT } [ 6.448776] ata3.00: configured for UDMA/133 [ 6.448781] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.448785] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.448788] Descriptor sense data with sense descriptors (in hex): [ 6.448790] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.448797] 03 ba 2e a8 [ 6.448801] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.448804] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 6.448811] end_request: I/O error, dev sda, sector 62533288 [ 6.448871] ata3: EH complete [ 6.449021] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.449075] ata3.00: irq_stat 0x40000001 [ 6.449128] ata3.00: failed command: READ FPDMA QUEUED [ 6.449180] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.449181] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.449326] ata3.00: status: { DRDY ERR } [ 6.449374] ata3.00: error: { IDNF ABRT } [ 6.450570] ata3.00: configured for UDMA/133 [ 6.450575] ata3: EH complete [ 6.450711] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.450768] ata3.00: irq_stat 0x40000001 [ 6.450816] ata3.00: failed command: READ FPDMA QUEUED [ 6.450868] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.450869] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.450999] ata3.00: status: { DRDY ERR } [ 6.451047] ata3.00: error: { IDNF ABRT } [ 6.452231] ata3.00: configured for UDMA/133 [ 6.452236] ata3: EH complete [ 6.452368] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.452425] ata3.00: irq_stat 0x40000001 [ 6.452473] ata3.00: failed command: READ FPDMA QUEUED [ 6.452525] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.452526] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.452656] ata3.00: status: { DRDY ERR } [ 6.452704] ata3.00: error: { IDNF ABRT } [ 6.454937] ata3.00: configured for UDMA/133 [ 6.454942] ata3: EH complete [ 6.455076] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.455137] ata3.00: irq_stat 0x40000001 [ 6.455189] ata3.00: failed command: READ FPDMA QUEUED [ 6.455245] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.455246] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.455386] ata3.00: status: { DRDY ERR } [ 6.455439] ata3.00: error: { IDNF ABRT } [ 6.457291] ata3.00: configured for UDMA/133 [ 6.457296] ata3: EH complete [ 6.457428] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.457483] ata3.00: irq_stat 0x40000001 [ 6.457533] ata3.00: failed command: READ FPDMA QUEUED [ 6.457587] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.457588] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.457722] ata3.00: status: { DRDY ERR } [ 6.457771] ata3.00: error: { IDNF ABRT } [ 6.459009] ata3.00: configured for UDMA/133 [ 6.459014] ata3: EH complete [ 6.459146] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.459200] ata3.00: irq_stat 0x40000001 [ 6.459250] ata3.00: failed command: READ FPDMA QUEUED [ 6.459307] ata3.00: cmd 60/08:00:70:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.459307] res 41/14:00:70:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.459437] ata3.00: status: { DRDY ERR } [ 6.459485] ata3.00: error: { IDNF ABRT } [ 6.460625] ata3.00: configured for UDMA/133 [ 6.460630] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.460633] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.460636] Descriptor sense data with sense descriptors (in hex): [ 6.460638] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.460646] 03 ba 2e 70 [ 6.460649] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.460652] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e 70 00 00 08 00 [ 6.460659] end_request: I/O error, dev sda, sector 62533232 [ 6.460717] ata3: EH complete [ 6.460872] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.460926] ata3.00: irq_stat 0x40000001 [ 6.460978] ata3.00: failed command: READ FPDMA QUEUED [ 6.461030] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.461031] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.461161] ata3.00: status: { DRDY ERR } [ 6.461209] ata3.00: error: { IDNF ABRT } [ 6.463388] ata3.00: configured for UDMA/133 [ 6.463393] ata3: EH complete [ 6.463525] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.463579] ata3.00: irq_stat 0x40000001 [ 6.463629] ata3.00: failed command: READ FPDMA QUEUED [ 6.463684] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.463685] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.463819] ata3.00: status: { DRDY ERR } [ 6.463871] ata3.00: error: { IDNF ABRT } [ 6.465664] ata3.00: configured for UDMA/133 [ 6.465669] ata3: EH complete [ 6.465802] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.465873] ata3.00: irq_stat 0x40000001 [ 6.465926] ata3.00: failed command: READ FPDMA QUEUED [ 6.465983] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.465984] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.466125] ata3.00: status: { DRDY ERR } [ 6.466177] ata3.00: error: { IDNF ABRT } [ 6.467375] ata3.00: configured for UDMA/133 [ 6.467380] ata3: EH complete [ 6.467511] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.467564] ata3.00: irq_stat 0x40000001 [ 6.467614] ata3.00: failed command: READ FPDMA QUEUED [ 6.467671] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.467672] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.467802] ata3.00: status: { DRDY ERR } [ 6.467850] ata3.00: error: { IDNF ABRT } [ 6.468986] ata3.00: configured for UDMA/133 [ 6.468990] ata3: EH complete [ 6.469121] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.469177] ata3.00: irq_stat 0x40000001 [ 6.469226] ata3.00: failed command: READ FPDMA QUEUED [ 6.469277] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.469278] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.469408] ata3.00: status: { DRDY ERR } [ 6.469462] ata3.00: error: { IDNF ABRT } [ 6.471703] ata3.00: configured for UDMA/133 [ 6.471708] ata3: EH complete [ 6.471844] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.471900] ata3.00: irq_stat 0x40000001 [ 6.471954] ata3.00: failed command: READ FPDMA QUEUED [ 6.472010] ata3.00: cmd 60/08:00:a0:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.472011] res 41/14:00:a0:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.472153] ata3.00: status: { DRDY ERR } [ 6.472203] ata3.00: error: { IDNF ABRT } [ 6.474104] ata3.00: configured for UDMA/133 [ 6.474107] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.474110] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.474113] Descriptor sense data with sense descriptors (in hex): [ 6.474114] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.474120] 03 ba 2e a0 [ 6.474122] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.474125] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a0 00 00 08 00 [ 6.474130] end_request: I/O error, dev sda, sector 62533280 [ 6.474188] ata3: EH complete [ 6.474343] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.474397] ata3.00: irq_stat 0x40000001 [ 6.474450] ata3.00: failed command: READ FPDMA QUEUED [ 6.474502] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.474502] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.474632] ata3.00: status: { DRDY ERR } [ 6.474681] ata3.00: error: { IDNF ABRT } [ 6.475871] ata3.00: configured for UDMA/133 [ 6.475877] ata3: EH complete [ 6.476009] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.476063] ata3.00: irq_stat 0x40000001 [ 6.476113] ata3.00: failed command: READ FPDMA QUEUED [ 6.476168] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.476169] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.476302] ata3.00: status: { DRDY ERR } [ 6.476351] ata3.00: error: { IDNF ABRT } [ 6.477496] ata3.00: configured for UDMA/133 [ 6.477501] ata3: EH complete [ 6.477634] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.478429] ata3.00: irq_stat 0x40000001 [ 6.478478] ata3.00: failed command: READ FPDMA QUEUED [ 6.478530] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.478530] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.478660] ata3.00: status: { DRDY ERR } [ 6.478709] ata3.00: error: { IDNF ABRT } [ 6.480819] ata3.00: configured for UDMA/133 [ 6.480823] ata3: EH complete [ 6.480954] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.481010] ata3.00: irq_stat 0x40000001 [ 6.481059] ata3.00: failed command: READ FPDMA QUEUED [ 6.481111] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.481111] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.481241] ata3.00: status: { DRDY ERR } [ 6.481289] ata3.00: error: { IDNF ABRT } [ 6.483182] ata3.00: configured for UDMA/133 [ 6.483187] ata3: EH complete [ 6.483319] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.483373] ata3.00: irq_stat 0x40000001 [ 6.483423] ata3.00: failed command: READ FPDMA QUEUED [ 6.483478] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.483479] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.483613] ata3.00: status: { DRDY ERR } [ 6.483661] ata3.00: error: { IDNF ABRT } [ 6.484912] ata3.00: configured for UDMA/133 [ 6.484916] ata3: EH complete [ 6.485046] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.485109] ata3.00: irq_stat 0x40000001 [ 6.485159] ata3.00: failed command: READ FPDMA QUEUED [ 6.485212] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.485213] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.485345] ata3.00: status: { DRDY ERR } [ 6.485395] ata3.00: error: { IDNF ABRT } [ 6.486539] ata3.00: configured for UDMA/133 [ 6.486543] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.486546] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.486550] Descriptor sense data with sense descriptors (in hex): [ 6.486552] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.486559] 03 ba 2e a8 [ 6.486563] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.486566] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 6.486573] end_request: I/O error, dev sda, sector 62533288 [ 6.486632] ata3: EH complete [ 6.486792] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.486846] ata3.00: irq_stat 0x40000001 [ 6.486899] ata3.00: failed command: READ FPDMA QUEUED [ 6.486951] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.486951] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.487081] ata3.00: status: { DRDY ERR } [ 6.487130] ata3.00: error: { IDNF ABRT } [ 6.489245] ata3.00: configured for UDMA/133 [ 6.489252] ata3: EH complete [ 6.489389] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.489443] ata3.00: irq_stat 0x40000001 [ 6.489493] ata3.00: failed command: READ FPDMA QUEUED [ 6.489548] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.489549] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.489683] ata3.00: status: { DRDY ERR } [ 6.489731] ata3.00: error: { IDNF ABRT } [ 6.491676] ata3.00: configured for UDMA/133 [ 6.491681] ata3: EH complete [ 6.491817] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.491871] ata3.00: irq_stat 0x40000001 [ 6.491922] ata3.00: failed command: READ FPDMA QUEUED [ 6.491976] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.491977] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.492112] ata3.00: status: { DRDY ERR } [ 6.492161] ata3.00: error: { IDNF ABRT } [ 6.493359] ata3.00: configured for UDMA/133 [ 6.493365] ata3: EH complete [ 6.493499] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.493558] ata3.00: irq_stat 0x40000001 [ 6.493608] ata3.00: failed command: READ FPDMA QUEUED [ 6.493667] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.493668] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.493808] ata3.00: status: { DRDY ERR } [ 6.493863] ata3.00: error: { IDNF ABRT } [ 6.495019] ata3.00: configured for UDMA/133 [ 6.495024] ata3: EH complete [ 6.495157] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.495211] ata3.00: irq_stat 0x40000001 [ 6.495261] ata3.00: failed command: READ FPDMA QUEUED [ 6.495317] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.495318] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.495448] ata3.00: status: { DRDY ERR } [ 6.495496] ata3.00: error: { IDNF ABRT } [ 6.497665] ata3.00: configured for UDMA/133 [ 6.497669] ata3: EH complete [ 6.497800] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.497857] ata3.00: irq_stat 0x40000001 [ 6.497905] ata3.00: failed command: READ FPDMA QUEUED [ 6.497957] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.497958] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.498088] ata3.00: status: { DRDY ERR } [ 6.498136] ata3.00: error: { IDNF ABRT } [ 6.499921] ata3.00: configured for UDMA/133 [ 6.499927] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.499931] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.499934] Descriptor sense data with sense descriptors (in hex): [ 6.499936] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.499943] 03 ba 2e a8 [ 6.499947] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.499950] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 6.499957] end_request: I/O error, dev sda, sector 62533288 [ 6.500019] ata3: EH complete [ 6.500175] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.500230] ata3.00: irq_stat 0x40000001 [ 6.500283] ata3.00: failed command: READ FPDMA QUEUED [ 6.500335] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.500335] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.500465] ata3.00: status: { DRDY ERR } [ 6.500513] ata3.00: error: { IDNF ABRT } [ 6.501702] ata3.00: configured for UDMA/133 [ 6.501706] ata3: EH complete [ 6.501839] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.501893] ata3.00: irq_stat 0x40000001 [ 6.501945] ata3.00: failed command: READ FPDMA QUEUED [ 6.501997] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.501998] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.502135] ata3.00: status: { DRDY ERR } [ 6.502185] ata3.00: error: { IDNF ABRT } [ 6.503283] ata3.00: configured for UDMA/133 [ 6.503288] ata3: EH complete [ 6.503421] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.503478] ata3.00: irq_stat 0x40000001 [ 6.503526] ata3.00: failed command: READ FPDMA QUEUED [ 6.503578] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.503579] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.503709] ata3.00: status: { DRDY ERR } [ 6.503757] ata3.00: error: { IDNF ABRT } [ 6.505931] ata3.00: configured for UDMA/133 [ 6.505936] ata3: EH complete [ 6.506069] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.506123] ata3.00: irq_stat 0x40000001 [ 6.506173] ata3.00: failed command: READ FPDMA QUEUED [ 6.506227] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.506228] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.506362] ata3.00: status: { DRDY ERR } [ 6.506411] ata3.00: error: { IDNF ABRT } [ 6.508308] ata3.00: configured for UDMA/133 [ 6.508312] ata3: EH complete [ 6.508443] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.508497] ata3.00: irq_stat 0x40000001 [ 6.508546] ata3.00: failed command: READ FPDMA QUEUED [ 6.508601] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.508602] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.508736] ata3.00: status: { DRDY ERR } [ 6.508784] ata3.00: error: { IDNF ABRT } [ 6.509974] ata3.00: configured for UDMA/133 [ 6.509979] ata3: EH complete [ 6.510109] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6.510166] ata3.00: irq_stat 0x40000001 [ 6.510214] ata3.00: failed command: READ FPDMA QUEUED [ 6.510266] ata3.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in [ 6.510267] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) [ 6.510397] ata3.00: status: { DRDY ERR } [ 6.510445] ata3.00: error: { IDNF ABRT } [ 6.511637] ata3.00: configured for UDMA/133 [ 6.511641] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6.511645] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 6.511648] Descriptor sense data with sense descriptors (in hex): [ 6.511650] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6.511658] 03 ba 2e a8 [ 6.511661] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [ 6.511664] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2e a8 00 00 08 00 [ 6.511671] end_request: I/O error, dev sda, sector 62533288 [ 6.511732] ata3: EH complete [ 6.790497] lp: driver loaded but no devices found [ 6.895898] vga16fb: initializing [ 6.895901] vga16fb: mapped to 0xffff8800000a0000 [ 6.895956] fb0: VGA16 VGA frame buffer device [ 6.987118] cfg80211: Calling CRDA to update world regulatory domain [ 7.256952] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0848 [ 7.256969] usbcore: registered new interface driver usblp [ 7.343137] Console: switching to colour frame buffer device 80x30 [ 7.362345] cfg80211: World regulatory domain updated: [ 7.362347] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7.362349] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.362350] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.362352] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.362354] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.362355] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.409316] rt61pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 7.422073] alloc irq_desc for 22 on node -1 [ 7.422076] alloc kstat_irqs on node -1 [ 7.422081] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.422084] hda_intel: position_fix set to 1 for device 1458:a022 [ 7.422117] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.458522] phy0: Selected rate control algorithm 'minstrel' [ 7.458935] Registered led device: rt61pci-phy0::radio [ 7.458947] Registered led device: rt61pci-phy0::assoc [ 7.623274] hda_codec: ALC889A: BIOS auto-probing. [ 7.624646] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 7.636739] alloc irq_desc for 17 on node -1 [ 7.636741] alloc kstat_irqs on node -1 [ 7.636746] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.636798] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 9.390519] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k [ 10.766322] ppdev: user-space parallel port driver