X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu
Current Operating System: Linux steven-dt64 2.6.32-24-generic #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=2f8d7a5c-b954-4135-b34c-813fda793bf5 ro quiet splash
Build Date: 21 July 2010  01:03:39PM
xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 20 01:00:46 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(++) using VT number 7

(--) PCI:*(0:2:0:0) 1002:9498:1682:2451 ATI Technologies Inc RV730 PRO [Radeon HD 4650] rev 0, Mem @ 0xc0000000/268435456, 0xdfff0000/65536, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.5.0, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.11
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.11
(II) ATI Proprietary Linux Driver Version Identifier:8.72.11
(II) ATI Proprietary Linux Driver Release Identifier: 8.723.1                              
(II) ATI Proprietary Linux Driver Build Date: Apr  8 2010 21:40:58
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x9498) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0xde05d0
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.1.0
(II) fglrx(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
FATAL: Module fglrx not found.
(--) fglrx(0): Chipset: "ATI Radeon HD 4600 Series " (Chipset = 0x9498)
(--) fglrx(0): (PciSubVendor = 0x1682, PciSubDevice = 0x2451)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xdfff0000
(--) fglrx(0): I/O port at 0x0000e800
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(EE) fglrx(0): Hasn't establisted DRM connection
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(EE) fglrx(0): Hasn't establisted DRM connection
(WW) fglrx(0): Hasn't establisted DRM connection
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
(WW) fglrx(0): No DRM connection for driver fglrx.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) fglrx(0): Connected Display0: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: ICP  Model: 7e3  Serial#: 4886
(II) fglrx(0): Year: 2005  Week: 46
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): DFP 1.x compatible TMDS
(II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.647 redY: 0.327   greenX: 0.292 greenY: 0.614
(II) fglrx(0): blueX: 0.142 blueY: 0.079   whiteX: 0.310 whiteY: 0.330
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Serial No: 7546TI004886
(II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: CM2019
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff002470e30716130000
(II) fglrx(0): 	2e0f010381261e78eafd56a5534a9d24
(II) fglrx(0): 	144f54bfef0081800101010101010101
(II) fglrx(0): 	010101010101302a009851002a403070
(II) fglrx(0): 	1300782d1100001e000000ff00373534
(II) fglrx(0): 	3654493030343838360a000000fd0032
(II) fglrx(0): 	4c1e530e000a202020202020000000fc
(II) fglrx(0): 	00434d323031390a202020202020005d
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output DFP3 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): Output DFP1 connected
(II) fglrx(0): Output DFP3 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output DFP1 using initial mode 1280x1024
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Radeon HD 4600 Series  has 2 configurable heads and 1 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. 
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1280) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 6911
(==) fglrx(0): Backing store disabled
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.2.1
(II) fglrx(0): GLESX enableFlags = 78
(II) fglrx(0): Acceleration enabled
(II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(II) fglrx(0): Enable composite support successfully
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot set TV horizontal size.
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. 
(II) fglrx(0): Cannot set TV horizontal position.
(II) fglrx(0): Cannot set TV vertical position.
(--) RandR disabled
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(II) AIGLX: Screen 0 is not DRI capable
(II) fglrx(0): Setting screen physical size to 338 x 270
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.3.2
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event3)
(**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Logitech Logitech USB Keyboard: always reports core events
(**) Logitech Logitech USB Keyboard: Device: "/dev/input/event3"
(II) Logitech Logitech USB Keyboard: Found keys
(II) Logitech Logitech USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD)
(II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event4)
(**) Logitech Logitech USB Keyboard: Applying InputClass "evdev pointer catchall"
(**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Logitech Logitech USB Keyboard: always reports core events
(**) Logitech Logitech USB Keyboard: Device: "/dev/input/event4"
(II) Logitech Logitech USB Keyboard: Found 20 mouse buttons
(II) Logitech Logitech USB Keyboard: Found scroll wheel(s)
(II) Logitech Logitech USB Keyboard: Found relative axes
(II) Logitech Logitech USB Keyboard: Found x and y relative axes
(II) Logitech Logitech USB Keyboard: Found keys
(II) Logitech Logitech USB Keyboard: Configuring as mouse
(II) Logitech Logitech USB Keyboard: Configuring as keyboard
(**) Logitech Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
(**) Logitech Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD)
(II) Logitech Logitech USB Keyboard: initialized for relative axes.
(II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event5)
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event5"
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE)
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
(II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.