[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 (Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=03797c81-25e8-47bf-bb9f-12c3634af1ab ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afd70000 (usable) [ 0.000000] BIOS-e820: 00000000afd70000 - 00000000afdbf000 (reserved) [ 0.000000] BIOS-e820: 00000000afdbf000 - 00000000afe58000 (usable) [ 0.000000] BIOS-e820: 00000000afe58000 - 00000000afebf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afebf000 - 00000000afeea000 (usable) [ 0.000000] BIOS-e820: 00000000afeea000 - 00000000afeff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afeff000 - 00000000aff00000 (usable) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e1000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FFF00000 mask FFFFF00000 write-protect [ 0.000000] 1 base 0000000000 mask FF80000000 write-back [ 0.000000] 2 base 0080000000 mask FFE0000000 write-back [ 0.000000] 3 base 00A0000000 mask FFF0000000 write-back [ 0.000000] 4 base 0100000000 mask FFC0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000140000000 aka 5120M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000afd70000 (usable) [ 0.000000] modified: 00000000afd70000 - 00000000afdbf000 (reserved) [ 0.000000] modified: 00000000afdbf000 - 00000000afe58000 (usable) [ 0.000000] modified: 00000000afe58000 - 00000000afebf000 (ACPI NVS) [ 0.000000] modified: 00000000afebf000 - 00000000afeea000 (usable) [ 0.000000] modified: 00000000afeea000 - 00000000afeff000 (ACPI data) [ 0.000000] modified: 00000000afeff000 - 00000000aff00000 (usable) [ 0.000000] modified: 00000000e0000000 - 00000000e1000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000aff00000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00aff00000 page 4k [ 0.000000] kernel direct mapping tables up to aff00000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] RAMDISK: 377fe000 - 37feff7d [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000afefe120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 00000000afefd000 000F4 (v04 HP REPLEY 00000003 LOHR 01000013) [ 0.000000] ACPI: DSDT 00000000afeee000 0A632 (v01 HP REPLEY F0000000 LOHR 01000013) [ 0.000000] ACPI: FACS 00000000afe61000 00040 [ 0.000000] ACPI: HPET 00000000afefc000 00038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: APIC 00000000afefb000 00084 (v02 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: MCFG 00000000afefa000 0003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: MSCT 00000000afef9000 0004E (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: BOOT 00000000afeed000 00028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: SLIC 00000000afeec000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013) [ 0.000000] ACPI: SSDT 00000000afeeb000 002B4 (v01 AMD PowerNow 00000001 AMD 00000001) [ 0.000000] ACPI: SRAT 00000000afeea000 000A0 (v03 AMD AMD CRB 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000 [ 0.000000] NUMA: Using 32 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff] [ 0.000000] bootmap [0000000000011000 - 0000000000038fff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377fe000 - 0037feff7d] RAMDISK ==> [00377fe000 - 0037feff7d] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a30204] BRK ==> [0001a30000 - 0001a30204] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000afd70 [ 0.000000] 0: 0x000afdbf -> 0x000afe58 [ 0.000000] 0: 0x000afebf -> 0x000afeea [ 0.000000] 0: 0x000afeff -> 0x000aff00 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 982479 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3835 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 702061 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000afd70000 - 00000000afdbf000 [ 0.000000] PM: Registered nosave memory: 00000000afe58000 - 00000000afebf000 [ 0.000000] PM: Registered nosave memory: 00000000afeea000 - 00000000afeff000 [ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e1000000 [ 0.000000] PM: Registered nosave memory: 00000000e1000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:30100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 964456 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=03797c81-25e8-47bf-bb9f-12c3634af1ab ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3789360k/5242880k available (5422k kernel code, 1312964k absent, 140556k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 39321600 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2100.055 MHz processor. [ 0.030008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.10 BogoMIPS (lpj=21000520) [ 0.030034] Security Framework initialized [ 0.030058] AppArmor: AppArmor initialized [ 0.040171] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.043053] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.044404] Mount-cache hash table entries: 256 [ 0.044573] Initializing cgroup subsys ns [ 0.044577] Initializing cgroup subsys cpuacct [ 0.044582] Initializing cgroup subsys memory [ 0.044591] Initializing cgroup subsys devices [ 0.044593] Initializing cgroup subsys freezer [ 0.044596] Initializing cgroup subsys net_cls [ 0.044620] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.044622] CPU: L2 Cache: 512K (64 bytes/line) [ 0.044625] CPU 0/0x0 -> Node 0 [ 0.044628] tseg: 00aff00000 [ 0.044630] CPU: Physical Processor ID: 0 [ 0.044632] CPU: Processor Core ID: 0 [ 0.044635] mce: CPU supports 5 MCE banks [ 0.044649] Performance Events: AMD PMU driver. [ 0.044654] ... version: 0 [ 0.044656] ... bit width: 48 [ 0.044658] ... generic registers: 4 [ 0.044660] ... value mask: 0000ffffffffffff [ 0.044662] ... max period: 00007fffffffffff [ 0.044664] ... fixed-purpose events: 0 [ 0.044665] ... event mask: 000000000000000f [ 0.047144] ACPI: Core revision 20090903 [ 0.070012] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.070018] ftrace: allocating 22529 entries in 89 pages [ 0.080143] Setting APIC routing to flat [ 0.080501] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.184051] CPU0: AMD Athlon(tm) X2 Dual-Core QL-65 stepping 01 [ 0.190000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.040000] Initializing CPU#1 [ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.040000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.040000] CPU 1/0x1 -> Node 0 [ 0.040000] CPU: Physical Processor ID: 0 [ 0.040000] CPU: Processor Core ID: 1 [ 0.340083] CPU1: AMD Athlon(tm) X2 Dual-Core QL-65 stepping 01 [ 0.340125] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.350000] Measured 227457453 cycles TSC warp between CPUs, turning off TSC clock. [ 0.350000] Marking TSC unstable due to check_tsc_sync_source failed [ 0.350015] Brought up 2 CPUs [ 0.350017] Total of 2 processors activated (8389.82 BogoMIPS). [ 0.350256] CPU0 attaching sched-domain: [ 0.350259] domain 0: span 0-1 level MC [ 0.350262] groups: 0 1 [ 0.350267] CPU1 attaching sched-domain: [ 0.350269] domain 0: span 0-1 level MC [ 0.350271] groups: 1 0 [ 0.350364] devtmpfs: initialized [ 0.350364] regulator: core version 0.5 [ 0.350364] Time: 1:11:45 Date: 09/19/10 [ 0.350364] NET: Registered protocol family 16 [ 0.350364] Trying to unpack rootfs image as initramfs... [ 0.350364] TOM: 00000000c0000000 aka 3072M [ 0.350364] Fam 10h mmconf [e0000000, e0ffffff] [ 0.350364] TOM2: 0000000140000000 aka 5120M [ 0.350364] ACPI: bus type pci registered [ 0.350441] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 15 [ 0.350444] PCI: MCFG area at e0000000 reserved in E820 [ 0.351361] PCI: Using MMCONFIG at e0000000 - e0ffffff [ 0.351363] PCI: Using configuration type 1 for base access [ 0.351392] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.351394] mtrr: probably your BIOS does not setup all CPUs. [ 0.351395] mtrr: corrected configuration. [ 0.360147] bio: create slab at 0 [ 0.361113] ACPI: EC: Look up EC in DSDT [ 0.362572] ACPI: Executed 1 blocks of module-level executable AML code [ 0.365872] ACPI: BIOS _OSI(Linux) query ignored [ 0.407214] ACPI: Interpreter enabled [ 0.407214] ACPI: (supports S0 S3 S4 S5) [ 0.407214] ACPI: Using IOAPIC for interrupt routing [ 0.407214] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.407214] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.553706] Freeing initrd memory: 8135k freed [ 0.583681] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.584052] ACPI: No dock devices found. [ 0.585218] _OSC request failed [ 0.585221] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.585450] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.585454] pci 0000:00:04.0: PME# disabled [ 0.585507] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.585510] pci 0000:00:05.0: PME# disabled [ 0.585562] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.585565] pci 0000:00:06.0: PME# disabled [ 0.585616] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.585620] pci 0000:00:07.0: PME# disabled [ 0.585720] pci 0000:00:11.0: reg 10 io port: [0x8038-0x803f] [ 0.585728] pci 0000:00:11.0: reg 14 io port: [0x804c-0x804f] [ 0.585736] pci 0000:00:11.0: reg 18 io port: [0x8030-0x8037] [ 0.585744] pci 0000:00:11.0: reg 1c io port: [0x8048-0x804b] [ 0.585752] pci 0000:00:11.0: reg 20 io port: [0x8010-0x801f] [ 0.585760] pci 0000:00:11.0: reg 24 32bit mmio: [0xd2508000-0xd25083ff] [ 0.585826] pci 0000:00:12.0: reg 10 32bit mmio: [0xd2507000-0xd2507fff] [ 0.585893] pci 0000:00:12.1: reg 10 32bit mmio: [0xd2506000-0xd2506fff] [ 0.585981] pci 0000:00:12.2: reg 10 32bit mmio: [0xd2508500-0xd25085ff] [ 0.586044] pci 0000:00:12.2: supports D1 D2 [ 0.586046] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.586051] pci 0000:00:12.2: PME# disabled [ 0.586090] pci 0000:00:13.0: reg 10 32bit mmio: [0xd2505000-0xd2505fff] [ 0.586157] pci 0000:00:13.1: reg 10 32bit mmio: [0xd2504000-0xd2504fff] [ 0.586245] pci 0000:00:13.2: reg 10 32bit mmio: [0xd2508400-0xd25084ff] [ 0.586308] pci 0000:00:13.2: supports D1 D2 [ 0.586310] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.586315] pci 0000:00:13.2: PME# disabled [ 0.586458] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.586466] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.586474] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.586482] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.586490] pci 0000:00:14.1: reg 20 io port: [0x8000-0x800f] [ 0.586575] pci 0000:00:14.2: reg 10 64bit mmio: [0xd2500000-0xd2503fff] [ 0.586627] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.586632] pci 0000:00:14.2: PME# disabled [ 0.586981] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff] [ 0.586986] pci 0000:01:05.0: reg 14 io port: [0x7000-0x70ff] [ 0.586991] pci 0000:01:05.0: reg 18 32bit mmio: [0xd2400000-0xd240ffff] [ 0.587002] pci 0000:01:05.0: reg 24 32bit mmio: [0xd2300000-0xd23fffff] [ 0.587021] pci 0000:01:05.0: supports D1 D2 [ 0.587049] pci 0000:01:05.1: reg 10 32bit mmio: [0xd2410000-0xd2413fff] [ 0.587081] pci 0000:01:05.1: supports D1 D2 [ 0.587166] pci 0000:00:01.0: bridge io port: [0x7000-0x7fff] [ 0.587170] pci 0000:00:01.0: bridge 32bit mmio: [0xd2300000-0xd24fffff] [ 0.587175] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.587232] pci 0000:00:04.0: bridge io port: [0x3000-0x6fff] [ 0.587235] pci 0000:00:04.0: bridge 32bit mmio: [0xd1300000-0xd22fffff] [ 0.587241] pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xd0ffffff] [ 0.587285] pci 0000:08:00.0: reg 10 32bit mmio: [0xd1200300-0xd12003ff] [ 0.587325] pci 0000:08:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff] [ 0.587413] pci 0000:08:00.2: reg 10 32bit mmio: [0xd1200200-0xd12002ff] [ 0.587534] pci 0000:08:00.3: reg 10 32bit mmio: [0xd1200100-0xd12001ff] [ 0.587656] pci 0000:08:00.4: reg 10 32bit mmio: [0xd1200000-0xd12000ff] [ 0.587829] pci 0000:00:05.0: bridge 32bit mmio: [0xd1200000-0xd12fffff] [ 0.587924] pci 0000:09:00.0: reg 10 64bit mmio: [0xd1100000-0xd1103fff] [ 0.587988] pci 0000:09:00.0: supports D1 D2 [ 0.588096] pci 0000:00:06.0: bridge 32bit mmio: [0xd1100000-0xd11fffff] [ 0.588143] pci 0000:0a:00.0: reg 10 io port: [0x2000-0x20ff] [ 0.588161] pci 0000:0a:00.0: reg 18 64bit mmio pref: [0xd1010000-0xd1010fff] [ 0.588175] pci 0000:0a:00.0: reg 20 64bit mmio pref: [0xd1000000-0xd100ffff] [ 0.588183] pci 0000:0a:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff] [ 0.588218] pci 0000:0a:00.0: supports D1 D2 [ 0.588221] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.588230] pci 0000:0a:00.0: PME# disabled [ 0.588335] pci 0000:00:07.0: bridge io port: [0x2000-0x2fff] [ 0.588342] pci 0000:00:07.0: bridge 64bit mmio pref: [0xd1000000-0xd10fffff] [ 0.588409] pci 0000:00:14.4: transparent bridge [ 0.588414] pci 0000:00:14.4: bridge io port: [0x1000-0x1fff] [ 0.588448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.588603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.588688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.588779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.588902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] [ 0.588992] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 0.589134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.589333] _OSC request failed [ 0.607140] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.607342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.607541] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.607740] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.607939] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.608138] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.608336] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.608535] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.608719] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.608726] vgaarb: loaded [ 0.608848] SCSI subsystem initialized [ 0.608918] libata version 3.00 loaded. [ 0.608918] usbcore: registered new interface driver usbfs [ 0.608918] usbcore: registered new interface driver hub [ 0.608918] usbcore: registered new device driver usb [ 0.608918] ACPI: WMI: Mapper loaded [ 0.608918] PCI: Using ACPI for IRQ routing [ 0.608918] NetLabel: Initializing [ 0.608918] NetLabel: domain hash size = 128 [ 0.608918] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.608918] NetLabel: unlabeled traffic allowed by default [ 0.608918] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.608918] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.611035] Switching to clocksource hpet [ 0.611819] AppArmor: AppArmor Filesystem Enabled [ 0.611843] pnp: PnP ACPI init [ 0.611867] ACPI: bus type pnp registered [ 0.670341] alloc irq_desc for 23 on node 0 [ 0.670344] alloc kstat_irqs on node 0 [ 0.671068] pnp: PnP ACPI: found 12 devices [ 0.671070] ACPI: ACPI bus type pnp unregistered [ 0.671086] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.671089] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.671098] system 00:08: ioport range 0x400-0x4cf has been reserved [ 0.671101] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.671104] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.671107] system 00:08: ioport range 0x680-0x6ff has been reserved [ 0.671109] system 00:08: ioport range 0x77a-0x77a has been reserved [ 0.671112] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.671115] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.671118] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 0.671121] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.671124] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.671127] system 00:08: ioport range 0xcd0-0xcdb has been reserved [ 0.671132] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.671135] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved [ 0.676170] pci 0000:08:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff] [ 0.676178] pci 0000:0a:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.676258] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.676261] pci 0000:00:01.0: IO window: 0x7000-0x7fff [ 0.676266] pci 0000:00:01.0: MEM window: 0xd2300000-0xd24fffff [ 0.676270] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.676275] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.676278] pci 0000:00:04.0: IO window: 0x3000-0x6fff [ 0.676282] pci 0000:00:04.0: MEM window: 0xd1300000-0xd22fffff [ 0.676286] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffff [ 0.676293] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08 [ 0.676294] pci 0000:00:05.0: IO window: disabled [ 0.676299] pci 0000:00:05.0: MEM window: 0xd1200000-0xd12fffff [ 0.676302] pci 0000:00:05.0: PREFETCH window: 0xb0000000-0xb00fffff [ 0.676307] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09 [ 0.676309] pci 0000:00:06.0: IO window: disabled [ 0.676313] pci 0000:00:06.0: MEM window: 0xd1100000-0xd11fffff [ 0.676317] pci 0000:00:06.0: PREFETCH window: disabled [ 0.676322] pci 0000:00:07.0: PCI bridge, secondary bus 0000:0a [ 0.676325] pci 0000:00:07.0: IO window: 0x2000-0x2fff [ 0.676329] pci 0000:00:07.0: MEM window: 0xb0100000-0xb01fffff [ 0.676333] pci 0000:00:07.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff [ 0.676338] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80 [ 0.676375] pci 0000:00:14.4: IO window: 0x1000-0x1fff [ 0.676381] pci 0000:00:14.4: MEM window: disabled [ 0.676386] pci 0000:00:14.4: PREFETCH window: disabled [ 0.676401] pci 0000:00:01.0: setting latency timer to 64 [ 0.676409] alloc irq_desc for 16 on node -1 [ 0.676411] alloc kstat_irqs on node -1 [ 0.676416] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.676420] pci 0000:00:04.0: setting latency timer to 64 [ 0.676427] alloc irq_desc for 17 on node -1 [ 0.676429] alloc kstat_irqs on node -1 [ 0.676432] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.676436] pci 0000:00:05.0: setting latency timer to 64 [ 0.676442] alloc irq_desc for 18 on node -1 [ 0.676444] alloc kstat_irqs on node -1 [ 0.676448] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.676451] pci 0000:00:06.0: setting latency timer to 64 [ 0.676460] alloc irq_desc for 19 on node -1 [ 0.676462] alloc kstat_irqs on node -1 [ 0.676465] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.676469] pci 0000:00:07.0: setting latency timer to 64 [ 0.676478] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.676481] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.676484] pci_bus 0000:01: resource 0 io: [0x7000-0x7fff] [ 0.676486] pci_bus 0000:01: resource 1 mem: [0xd2300000-0xd24fffff] [ 0.676489] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.676492] pci_bus 0000:02: resource 0 io: [0x3000-0x6fff] [ 0.676494] pci_bus 0000:02: resource 1 mem: [0xd1300000-0xd22fffff] [ 0.676497] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd0ffffff] [ 0.676499] pci_bus 0000:08: resource 1 mem: [0xd1200000-0xd12fffff] [ 0.676502] pci_bus 0000:08: resource 2 pref mem [0xb0000000-0xb00fffff] [ 0.676505] pci_bus 0000:09: resource 1 mem: [0xd1100000-0xd11fffff] [ 0.676508] pci_bus 0000:0a: resource 0 io: [0x2000-0x2fff] [ 0.676510] pci_bus 0000:0a: resource 1 mem: [0xb0100000-0xb01fffff] [ 0.676513] pci_bus 0000:0a: resource 2 pref mem [0xd1000000-0xd10fffff] [ 0.676516] pci_bus 0000:80: resource 0 io: [0x1000-0x1fff] [ 0.676518] pci_bus 0000:80: resource 3 io: [0x00-0xffff] [ 0.676521] pci_bus 0000:80: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.676568] NET: Registered protocol family 2 [ 0.676750] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.678404] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.683581] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.684172] TCP: Hash tables configured (established 524288 bind 65536) [ 0.684175] TCP reno registered [ 0.684307] NET: Registered protocol family 1 [ 0.684514] pci 0000:01:05.0: Boot video device [ 0.684613] Simple Boot Flag at 0x44 set to 0x1 [ 0.684852] Scanning for low memory corruption every 60 seconds [ 0.685016] audit: initializing netlink socket (disabled) [ 0.685028] type=2000 audit(1284858704.680:1): initialized [ 0.694467] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.696237] VFS: Disk quotas dquot_6.5.2 [ 0.696305] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.697132] fuse init (API version 7.13) [ 0.697234] msgmni has been set to 7416 [ 0.697587] alg: No test for stdrng (krng) [ 0.697659] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.697663] io scheduler noop registered [ 0.697665] io scheduler anticipatory registered [ 0.697667] io scheduler deadline registered [ 0.697712] io scheduler cfq registered (default) [ 0.697908] alloc irq_desc for 25 on node -1 [ 0.697910] alloc kstat_irqs on node -1 [ 0.697921] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X [ 0.697929] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.698043] alloc irq_desc for 26 on node -1 [ 0.698045] alloc kstat_irqs on node -1 [ 0.698051] pcieport 0000:00:05.0: irq 26 for MSI/MSI-X [ 0.698057] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.698161] alloc irq_desc for 27 on node -1 [ 0.698163] alloc kstat_irqs on node -1 [ 0.698169] pcieport 0000:00:06.0: irq 27 for MSI/MSI-X [ 0.698175] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.698275] alloc irq_desc for 28 on node -1 [ 0.698277] alloc kstat_irqs on node -1 [ 0.698283] pcieport 0000:00:07.0: irq 28 for MSI/MSI-X [ 0.698289] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.698362] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.698522] _OSC request failed [ 0.698638] _OSC request failed [ 0.698658] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.702305] ACPI: AC Adapter [ACAD] (on-line) [ 0.702389] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.702393] ACPI: Power Button [PWRB] [ 0.702455] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.702603] ACPI: Lid Switch [LID] [ 0.702654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.702657] ACPI: Power Button [PWRF] [ 0.703180] processor LNXCPU:00: registered as cooling_device0 [ 0.703222] processor LNXCPU:01: registered as cooling_device1 [ 0.834233] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.834242] ACPI: Thermal Zone [TZ01] (35 C) [ 0.835747] Linux agpgart interface v0.103 [ 0.835791] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.837215] brd: module loaded [ 0.837751] loop: module loaded [ 0.837855] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.838070] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.838155] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 0.838510] Fixed MDIO Bus: probed [ 0.838549] PPP generic driver version 2.4.2 [ 0.838591] tun: Universal TUN/TAP device driver, 1.6 [ 0.838593] tun: (C) 1999-2004 Max Krasnyansky [ 0.838678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.838733] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.838775] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 0.838780] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.838815] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.838853] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 0.838869] ehci_hcd 0000:00:12.2: debug port 1 [ 0.838899] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2508500 [ 0.860060] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.860158] usb usb1: configuration #1 chosen from 1 choice [ 0.860191] hub 1-0:1.0: USB hub found [ 0.860200] hub 1-0:1.0: 6 ports detected [ 0.860304] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.860319] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 0.860323] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.860357] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.860383] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 0.860398] ehci_hcd 0000:00:13.2: debug port 1 [ 0.860424] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2508400 [ 0.870056] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.870133] usb usb2: configuration #1 chosen from 1 choice [ 0.870160] hub 2-0:1.0: USB hub found [ 0.870167] hub 2-0:1.0: 6 ports detected [ 0.870271] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.870321] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.870335] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 0.870338] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.870371] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.870444] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2507000 [ 0.934143] usb usb3: configuration #1 chosen from 1 choice [ 0.934171] hub 3-0:1.0: USB hub found [ 0.934215] hub 3-0:1.0: 3 ports detected [ 0.934271] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.934286] ohci_hcd 0000:00:12.1: setting latency timer to 64 [ 0.934290] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 0.934325] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 0.934385] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2506000 [ 0.994138] usb usb4: configuration #1 chosen from 1 choice [ 0.994165] hub 4-0:1.0: USB hub found [ 0.994210] hub 4-0:1.0: 3 ports detected [ 0.994265] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.994277] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 0.994281] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.994324] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.994383] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2505000 [ 1.054139] usb usb5: configuration #1 chosen from 1 choice [ 1.054168] hub 5-0:1.0: USB hub found [ 1.054211] hub 5-0:1.0: 3 ports detected [ 1.054262] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.054279] ohci_hcd 0000:00:13.1: setting latency timer to 64 [ 1.054283] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.054330] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.054381] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2504000 [ 1.114129] usb usb6: configuration #1 chosen from 1 choice [ 1.114159] hub 6-0:1.0: USB hub found [ 1.114203] hub 6-0:1.0: 3 ports detected [ 1.114262] uhci_hcd: USB Universal Host Controller Interface driver [ 1.114361] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.151285] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.151306] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.151407] mice: PS/2 mouse device common for all mice [ 1.151574] rtc_cmos 00:04: RTC can wake from S4 [ 1.151629] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.151690] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.151835] device-mapper: uevent: version 1.0.3 [ 1.151972] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.152092] device-mapper: multipath: version 1.1.0 loaded [ 1.152098] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.152344] cpuidle: using governor ladder [ 1.152347] cpuidle: using governor menu [ 1.152744] TCP cubic registered [ 1.152891] NET: Registered protocol family 10 [ 1.153410] lo: Disabled Privacy Extensions [ 1.153707] NET: Registered protocol family 17 [ 1.159005] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual-Core QL-65 processors (2 cpu cores) (version 2.20.00) [ 1.159057] powernow-k8: 0 : pstate 0 (2100 MHz) [ 1.159059] powernow-k8: 1 : pstate 1 (1050 MHz) [ 1.159750] PM: Resume from disk failed. [ 1.159766] registered taskstats version 1 [ 1.160443] Magic number: 10:165:155 [ 1.160465] bdi 1:7: hash matches [ 1.160512] acpi device:22: hash matches [ 1.160597] rtc_cmos 00:04: setting system clock to 2010-09-19 01:11:46 UTC (1284858706) [ 1.160600] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.160602] EDD information not available. [ 1.160689] Freeing unused kernel memory: 880k freed [ 1.161182] Write protecting the kernel read-only data: 7696k [ 1.187439] udev: starting version 151 [ 1.197039] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.231407] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 1.333404] ACPI: Battery Slot [BAT0] (battery present) [ 1.383864] usb 1-6: configuration #1 chosen from 1 choice [ 1.686849] ahci 0000:00:11.0: version 3.0 [ 1.686909] alloc irq_desc for 22 on node -1 [ 1.686912] alloc kstat_irqs on node -1 [ 1.686922] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.687172] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x7 impl SATA mode [ 1.687178] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs [ 1.705376] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.705410] r8169 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.705502] r8169 0000:0a:00.0: setting latency timer to 64 [ 1.705551] alloc irq_desc for 29 on node -1 [ 1.705553] alloc kstat_irqs on node -1 [ 1.705604] r8169 0000:0a:00.0: irq 29 for MSI/MSI-X [ 1.706233] eth0: RTL8102e at 0xffffc90000670000, 00:23:5a:a3:7b:fd, XID 04c00000 IRQ 29 [ 1.720185] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 1.737903] scsi0 : ahci [ 1.738166] scsi1 : ahci [ 1.738277] scsi2 : ahci [ 1.738380] scsi3 : ahci [ 1.738478] scsi4 : ahci [ 1.738581] scsi5 : ahci [ 1.738758] ata1: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508100 irq 22 [ 1.738762] ata2: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508180 irq 22 [ 1.738766] ata3: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508200 irq 22 [ 1.738769] ata4: DUMMY [ 1.738770] ata5: DUMMY [ 1.738772] ata6: DUMMY [ 1.750298] scsi6 : pata_atiixp [ 1.750453] scsi7 : pata_atiixp [ 1.751590] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14 [ 1.751593] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15 [ 1.924220] usb 3-1: configuration #1 chosen from 1 choice [ 2.090089] ata3: SATA link down (SStatus 0 SControl 300) [ 2.260055] ata1: softreset failed (device not ready) [ 2.260059] ata1: applying SB600 PMP SRST workaround and retrying [ 2.270051] ata2: softreset failed (device not ready) [ 2.270055] ata2: applying SB600 PMP SRST workaround and retrying [ 2.440060] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.441546] ata1.00: ATA-8: WDC WD2500BEVT-60ZCT1, 13.01A13, max UDMA/100 [ 2.441550] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.443140] ata1.00: configured for UDMA/100 [ 2.450060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.460174] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-6 13.0 PQ: 0 ANSI: 5 [ 2.460398] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.460531] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.460581] sd 0:0:0:0: [sda] Write Protect is off [ 2.460584] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.460609] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.460778] sda: [ 2.462993] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100 [ 2.476455] ata2.00: configured for UDMA/100 [ 2.490079] usb 5-1: new full speed USB device using ohci_hcd and address 2 [ 2.491092] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7561S AH03 PQ: 0 ANSI: 5 [ 2.496528] sda1 sda2 sda3 sda4 [ 2.522549] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.657431] usbcore: registered new interface driver hiddev [ 2.664403] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input5 [ 2.664526] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:12.0-1/input0 [ 2.664560] usbcore: registered new interface driver usbhid [ 2.664563] usbhid: v2.6:USB HID core driver [ 2.706206] usb 5-1: configuration #1 chosen from 1 choice [ 3.000296] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 3.040107] usb 5-2: new full speed USB device using ohci_hcd and address 3 [ 3.255159] usb 5-2: configuration #1 chosen from 1 choice [ 5.118391] Adding 1550232k swap on /dev/sda5. Priority:-1 extents:1 across:1550232k [ 5.497617] udev: starting version 151 [ 6.526394] lirc_dev: IR Remote Control driver registered, major 61 [ 6.610393] Bluetooth: Core ver 2.15 [ 6.610778] NET: Registered protocol family 31 [ 6.610780] Bluetooth: HCI device and connection manager initialized [ 6.610785] Bluetooth: HCI socket layer initialized [ 6.926131] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 6.935274] acpi device:03: registered as cooling_device2 [ 6.935519] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 6.935586] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 6.951632] lib80211: common routines for IEEE802.11 drivers [ 6.951636] lib80211_crypt: registered algorithm 'NULL' [ 6.997229] sdhci: Secure Digital Host Controller Interface driver [ 6.997232] sdhci: Copyright(c) Pierre Ossman [ 7.004741] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.020054] sdhci-pci 0000:08:00.0: SDHCI controller found [197b:2382] (rev 0) [ 7.020081] sdhci-pci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.020172] sdhci-pci 0000:08:00.0: setting latency timer to 64 [ 7.020689] Registered led device: mmc0:: [ 7.020775] mmc0: SDHCI controller on PCI [0000:08:00.0] using ADMA [ 7.020793] sdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 0) [ 7.020813] sdhci-pci 0000:08:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.020824] sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface. [ 7.020831] sdhci-pci 0000:08:00.2: PCI INT A disabled [ 7.362037] wl: module license 'MIXED/Proprietary' taints kernel. [ 7.362043] Disabling lock debugging due to kernel taint [ 7.367735] wl 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.367747] wl 0000:09:00.0: setting latency timer to 64 [ 7.375510] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 7.376043] usbcore: registered new interface driver btusb [ 7.376894] EDAC MC: Ver: 2.1.0 Sep 16 2010 [ 7.384035] lirc_dev: lirc_register_driver: sample_rate: 0 [ 7.384230] enecir: KB3926C detected, driver support is not complete! [ 7.384233] enecir: chip is 0x3926 - 0x00, 0xc0 [ 7.384242] enecir: hardware features: [ 7.384244] enecir: learning and tx off, gpio40_learn off, fan_in off [ 7.384246] enecir: driver has been succesfully loaded [ 7.388169] jmb38x_ms 0000:08:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.388178] jmb38x_ms 0000:08:00.3: setting latency timer to 64 [ 7.391862] Linux video capture interface: v2.00 [ 7.495348] EDAC amd64_edac: Ver: 3.2.0 Sep 16 2010 [ 7.495432] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 7.495443] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 7.495445] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 7.495446] (Note that use of the override may cause unknown side effects.) [ 7.495456] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 7.515174] uvcvideo: Found UVC 1.00 device HP Webcam (090c:137b) [ 7.527087] lis3lv02d: laptop model unknown, using default axes configuration [ 7.527918] lis3lv02d: 1-byte sensor found [ 7.536803] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7 [ 7.537260] Registered led device: hp::hddprotect [ 7.537288] lis3lv02d driver loaded. [ 7.733401] vga16fb: initializing [ 7.733406] vga16fb: mapped to 0xffff8800000a0000 [ 7.733491] fb0: VGA16 VGA frame buffer device [ 7.741145] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6:1.0/input/input8 [ 7.741228] usbcore: registered new interface driver uvcvideo [ 7.741232] USB Video Class driver (v0.1.0) [ 7.778714] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9 [ 7.806909] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 7.831168] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10 [ 8.033633] lib80211_crypt: registered algorithm 'TKIP' [ 8.034128] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36 [ 8.162340] lp: driver loaded but no devices found [ 8.173669] Console: switching to colour frame buffer device 80x30 [ 8.203960] type=1505 audit(1284876713.539:2): operation="profile_load" pid=598 name="/sbin/dhclient3" [ 8.204236] type=1505 audit(1284876713.539:3): operation="profile_load" pid=598 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 8.204392] type=1505 audit(1284876713.539:4): operation="profile_load" pid=598 name="/usr/lib/connman/scripts/dhclient-script" [ 8.878994] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.879141] HDA Intel 0000:00:14.2: setting latency timer to 64 [ 9.118377] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input11 [ 9.151121] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 9.151373] input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 9.152502] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.152602] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 12.100942] type=1505 audit(1284876717.439:5): operation="profile_load" pid=924 name="/usr/share/gdm/guest-session/Xsession" [ 12.103302] type=1505 audit(1284876717.439:6): operation="profile_replace" pid=925 name="/sbin/dhclient3" [ 12.103593] type=1505 audit(1284876717.439:7): operation="profile_replace" pid=925 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.103756] type=1505 audit(1284876717.439:8): operation="profile_replace" pid=925 name="/usr/lib/connman/scripts/dhclient-script" [ 12.533550] type=1505 audit(1284876717.870:9): operation="profile_load" pid=926 name="/usr/bin/evince" [ 12.537115] type=1505 audit(1284876717.870:10): operation="profile_load" pid=926 name="/usr/bin/evince-previewer" [ 12.539362] type=1505 audit(1284876717.870:11): operation="profile_load" pid=926 name="/usr/bin/evince-thumbnailer" [ 13.322796] __ratelimit: 6 callbacks suppressed [ 13.322800] type=1505 audit(1284876718.659:14): operation="profile_load" pid=947 name="/usr/sbin/tcpdump" [ 14.450195] r8169: eth0: link down [ 14.450926] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.796133] Bluetooth: L2CAP ver 2.14 [ 15.796137] Bluetooth: L2CAP socket layer initialized [ 16.146193] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.146197] Bluetooth: BNEP filters: protocol multicast [ 16.194319] ppdev: user-space parallel port driver [ 16.222748] Bridge firewalling registered [ 16.720688] Bluetooth: SCO (Voice Link) ver 0.6 [ 16.720692] Bluetooth: SCO socket layer initialized [ 17.177573] Bluetooth: RFCOMM TTY layer initialized [ 17.177579] Bluetooth: RFCOMM socket layer initialized [ 17.177581] Bluetooth: RFCOMM ver 1.11