[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 (Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=1adb4752-5010-41c2-a47e-2d69ccd24373 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] modified: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] modified: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] modified: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfde0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfde0000 page 4k [ 0.000000] kernel direct mapping tables up to cfde0000 @ 8000-b000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ a000-c000 [ 0.000000] RAMDISK: 377fd000 - 37feff4e [ 0.000000] ACPI: RSDP 00000000000f6f70 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfde30c0 0646E (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfde0000 00040 [ 0.000000] ACPI: SSDT 00000000cfde9600 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfde9ec0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfde9f00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfde9540 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 0000000000055fff] pages 46 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377fd000 - 0037feff4e] RAMDISK ==> [00377fd000 - 0037feff4e] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a300fe] BRK ==> [0001a30000 - 0001a300fe] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f55f0] f55f0 [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfde0 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096506 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833048 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000 [ 0.000000] PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065044 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=1adb4752-5010-41c2-a47e-2d69ccd24373 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 8184368k/9175040k available (5422k kernel code, 789016k absent, 201656k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2812.668 MHz processor. [ 0.030006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.32 BogoMIPS (lpj=28126640) [ 0.030023] Security Framework initialized [ 0.030038] AppArmor: AppArmor initialized [ 0.030544] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.033324] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.040960] Mount-cache hash table entries: 256 [ 0.041066] Initializing cgroup subsys ns [ 0.041069] Initializing cgroup subsys cpuacct [ 0.041072] Initializing cgroup subsys memory [ 0.041078] Initializing cgroup subsys devices [ 0.041080] Initializing cgroup subsys freezer [ 0.041081] Initializing cgroup subsys net_cls [ 0.041096] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.041098] CPU: L2 Cache: 512K (64 bytes/line) [ 0.041100] CPU 0/0x0 -> Node 0 [ 0.041102] tseg: 00cfe00000 [ 0.041104] CPU: Physical Processor ID: 0 [ 0.041105] CPU: Processor Core ID: 0 [ 0.041107] mce: CPU supports 6 MCE banks [ 0.041115] using C1E aware idle routine [ 0.041117] Performance Events: AMD PMU driver. [ 0.041120] ... version: 0 [ 0.041122] ... bit width: 48 [ 0.041123] ... generic registers: 4 [ 0.041124] ... value mask: 0000ffffffffffff [ 0.041125] ... max period: 00007fffffffffff [ 0.041127] ... fixed-purpose events: 0 [ 0.041128] ... event mask: 000000000000000f [ 0.042384] ACPI: Core revision 20090903 [ 0.060023] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.060032] ftrace: allocating 22529 entries in 89 pages [ 0.070076] Setting APIC routing to flat [ 0.070554] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.175011] CPU0: AMD Athlon(tm) II X4 630 Processor stepping 02 [ 0.180000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.040000] Initializing CPU#1 [ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.040000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.040000] CPU 1/0x1 -> Node 0 [ 0.040000] CPU: Physical Processor ID: 0 [ 0.040000] CPU: Processor Core ID: 1 [ 0.330077] CPU1: AMD Athlon(tm) II X4 630 Processor stepping 02 [ 0.330083] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.340057] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.040000] Initializing CPU#2 [ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.040000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.040000] CPU 2/0x2 -> Node 0 [ 0.040000] CPU: Physical Processor ID: 0 [ 0.040000] CPU: Processor Core ID: 3 [ 0.500060] CPU2: AMD Athlon(tm) II X4 630 Processor stepping 02 [ 0.500065] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.510059] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.040000] Initializing CPU#3 [ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.040000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.040000] CPU 3/0x3 -> Node 0 [ 0.040000] CPU: Physical Processor ID: 0 [ 0.040000] CPU: Processor Core ID: 2 [ 0.670043] CPU3: AMD Athlon(tm) II X4 630 Processor stepping 02 [ 0.670049] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.680008] Brought up 4 CPUs [ 0.680010] Total of 4 processors activated (22502.35 BogoMIPS). [ 0.680356] CPU0 attaching sched-domain: [ 0.680358] domain 0: span 0-3 level MC [ 0.680359] groups: 0 1 2 3 [ 0.680364] CPU1 attaching sched-domain: [ 0.680365] domain 0: span 0-3 level MC [ 0.680366] groups: 1 2 3 0 [ 0.680369] CPU2 attaching sched-domain: [ 0.680371] domain 0: span 0-3 level MC [ 0.680372] groups: 2 3 0 1 [ 0.680375] CPU3 attaching sched-domain: [ 0.680376] domain 0: span 0-3 level MC [ 0.680377] groups: 3 0 1 2 [ 0.680456] devtmpfs: initialized [ 0.680456] regulator: core version 0.5 [ 0.680456] Time: 21:24:46 Date: 09/18/10 [ 0.680456] NET: Registered protocol family 16 [ 0.680456] node 0 link 0: io port [c000, ffff] [ 0.680456] Trying to unpack rootfs image as initramfs... [ 0.680456] TOM: 00000000d0000000 aka 3328M [ 0.680456] Fam 10h mmconf [e0000000, e00fffff] [ 0.680456] node 0 link 0: mmio [a0000, bffff] [ 0.680456] node 0 link 0: mmio [d0000000, dfffffff] [ 0.680456] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.680456] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] [ 0.680456] TOM2: 0000000230000000 aka 8960M [ 0.680456] bus: [00,03] on node 0 link 0 [ 0.680456] bus: 00 index 0 io port: [0, ffff] [ 0.680456] bus: 00 index 1 mmio: [a0000, bffff] [ 0.680456] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.680456] bus: 00 index 3 mmio: [e0400000, ffffffff] [ 0.680456] bus: 00 index 4 mmio: [e0100000, e03fffff] [ 0.680456] bus: 00 index 5 mmio: [230000000, fcffffffff] [ 0.680456] ACPI: bus type pci registered [ 0.680456] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.680456] PCI: MCFG area at e0000000 reserved in E820 [ 0.687153] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.687156] PCI: Using configuration type 1 for base access [ 0.687671] bio: create slab at 0 [ 0.687671] ACPI: EC: Look up EC in DSDT [ 0.695272] ACPI: Interpreter enabled [ 0.695279] ACPI: (supports S0 S3 S4 S5) [ 0.695299] ACPI: Using IOAPIC for interrupt routing [ 0.698925] ACPI: No dock devices found. [ 0.699029] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.699067] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.699115] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.699117] pci 0000:00:02.0: PME# disabled [ 0.699153] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.699155] pci 0000:00:0a.0: PME# disabled [ 0.699199] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] [ 0.699205] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] [ 0.699210] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] [ 0.699216] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] [ 0.699222] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] [ 0.699228] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] [ 0.699275] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] [ 0.699324] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.699390] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] [ 0.699436] pci 0000:00:12.2: supports D1 D2 [ 0.699438] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.699441] pci 0000:00:12.2: PME# disabled [ 0.699469] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.699518] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.699585] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.699632] pci 0000:00:13.2: supports D1 D2 [ 0.699633] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.699636] pci 0000:00:13.2: PME# disabled [ 0.699742] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.699747] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.699753] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.699759] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.699764] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] [ 0.699824] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] [ 0.699862] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.699866] pci 0000:00:14.2: PME# disabled [ 0.699960] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff] [ 0.700113] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.700119] pci 0000:01:00.0: reg 18 64bit mmio: [0xfdfc0000-0xfdfdffff] [ 0.700124] pci 0000:01:00.0: reg 20 io port: [0xee00-0xeeff] [ 0.700130] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.700145] pci 0000:01:00.0: supports D1 D2 [ 0.700172] pci 0000:01:00.1: reg 10 64bit mmio: [0xfdffc000-0xfdffffff] [ 0.700200] pci 0000:01:00.1: supports D1 D2 [ 0.700247] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.700249] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.700252] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.700282] pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff] [ 0.700295] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdbff000-0xfdbfffff] [ 0.700305] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdbe0000-0xfdbeffff] [ 0.700310] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.700336] pci 0000:02:00.0: supports D1 D2 [ 0.700337] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.700341] pci 0000:02:00.0: PME# disabled [ 0.700393] pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff] [ 0.700395] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.700398] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.700459] pci 0000:03:0e.0: reg 10 32bit mmio: [0xfddff000-0xfddff7ff] [ 0.700467] pci 0000:03:0e.0: reg 14 32bit mmio: [0xfddf8000-0xfddfbfff] [ 0.700520] pci 0000:03:0e.0: supports D1 D2 [ 0.700522] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.700526] pci 0000:03:0e.0: PME# disabled [ 0.700559] pci 0000:00:14.4: transparent bridge [ 0.700562] pci 0000:00:14.4: bridge io port: [0xc000-0xcfff] [ 0.700566] pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.700570] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.700582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.700782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.700847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.700899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.718806] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.718884] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.718960] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.719041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.719117] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.719194] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.719270] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.719347] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.719434] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.719437] vgaarb: loaded [ 0.719519] SCSI subsystem initialized [ 0.719569] libata version 3.00 loaded. [ 0.719569] usbcore: registered new interface driver usbfs [ 0.719569] usbcore: registered new interface driver hub [ 0.719628] usbcore: registered new device driver usb [ 0.719628] ACPI: WMI: Mapper loaded [ 0.719628] PCI: Using ACPI for IRQ routing [ 0.719628] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.719628] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.719628] NetLabel: Initializing [ 0.719628] NetLabel: domain hash size = 128 [ 0.719628] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.719628] NetLabel: unlabeled traffic allowed by default [ 0.720028] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.720031] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.722063] Switching to clocksource tsc [ 0.722191] AppArmor: AppArmor Filesystem Enabled [ 0.722191] pnp: PnP ACPI init [ 0.722191] ACPI: bus type pnp registered [ 0.723375] pnp 00:0b: mem resource (0xd1a00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.723378] pnp 00:0b: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.723380] pnp 00:0b: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.723382] pnp 00:0b: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.723385] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.723387] pnp 00:0b: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.723455] pnp: PnP ACPI: found 12 devices [ 0.723456] ACPI: ACPI bus type pnp unregistered [ 0.723466] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.723468] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.723470] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.723473] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.723475] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.723477] system 00:02: ioport range 0x238-0x23f has been reserved [ 0.723478] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.723480] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.723482] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.723484] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.723486] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.723487] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.723489] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.723491] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.723493] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.723494] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.723496] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.723498] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.723500] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.723502] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.723504] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.723508] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.723512] system 00:0b: iomem range 0xcfde0000-0xcfdfffff could not be reserved [ 0.723514] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.723517] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.723519] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.723523] system 00:0b: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.728187] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.728189] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.728192] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff [ 0.728195] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.728198] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.728200] pci 0000:00:0a.0: IO window: 0xd000-0xdfff [ 0.728202] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff [ 0.728205] pci 0000:00:0a.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.728208] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.728210] pci 0000:00:14.4: IO window: 0xc000-0xcfff [ 0.728215] pci 0000:00:14.4: MEM window: 0xfdd00000-0xfddfffff [ 0.728218] pci 0000:00:14.4: PREFETCH window: 0xfdc00000-0xfdcfffff [ 0.728229] alloc irq_desc for 18 on node 0 [ 0.728231] alloc kstat_irqs on node 0 [ 0.728238] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.728241] pci 0000:00:02.0: setting latency timer to 64 [ 0.728246] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.728248] pci 0000:00:0a.0: setting latency timer to 64 [ 0.728255] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.728257] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.728259] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.728261] pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.728262] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.728264] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.728266] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.728267] pci_bus 0000:02: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.728269] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.728271] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.728273] pci_bus 0000:03: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.728274] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.728276] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.728308] NET: Registered protocol family 2 [ 0.728481] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.729713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.732477] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.732824] TCP: Hash tables configured (established 524288 bind 65536) [ 0.732827] TCP reno registered [ 0.732913] NET: Registered protocol family 1 [ 0.877805] pci 0000:01:00.0: Boot video device [ 0.877947] PCI-DMA: Disabling AGP. [ 0.878018] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.878019] PCI-DMA: using GART IOMMU. [ 0.878022] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.879398] Scanning for low memory corruption every 60 seconds [ 0.879503] audit: initializing netlink socket (disabled) [ 0.879512] type=2000 audit(1284845085.877:1): initialized [ 0.879868] Freeing initrd memory: 8139k freed [ 0.886221] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.887213] VFS: Disk quotas dquot_6.5.2 [ 0.887252] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.887712] fuse init (API version 7.13) [ 0.887778] msgmni has been set to 16000 [ 0.887992] alg: No test for stdrng (krng) [ 0.888034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.888037] io scheduler noop registered [ 0.888038] io scheduler anticipatory registered [ 0.888039] io scheduler deadline registered [ 0.888063] io scheduler cfq registered (default) [ 0.888179] alloc irq_desc for 25 on node 0 [ 0.888181] alloc kstat_irqs on node 0 [ 0.888187] pcieport 0000:00:02.0: irq 25 for MSI/MSI-X [ 0.888191] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.888276] alloc irq_desc for 26 on node 0 [ 0.888277] alloc kstat_irqs on node 0 [ 0.888281] pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X [ 0.888284] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.888333] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.888349] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.888419] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.888422] ACPI: Power Button [PWRB] [ 0.888461] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.888463] ACPI: Power Button [PWRF] [ 0.888705] processor LNXCPU:00: registered as cooling_device0 [ 0.888740] processor LNXCPU:01: registered as cooling_device1 [ 0.888776] processor LNXCPU:02: registered as cooling_device2 [ 0.888811] processor LNXCPU:03: registered as cooling_device3 [ 0.891316] Linux agpgart interface v0.103 [ 0.891344] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.891448] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.891689] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.892365] brd: module loaded [ 0.892664] loop: module loaded [ 0.892734] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.892918] alloc irq_desc for 16 on node 0 [ 0.892919] alloc kstat_irqs on node 0 [ 0.892928] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.893183] Fixed MDIO Bus: probed [ 0.893208] PPP generic driver version 2.4.2 [ 0.893238] tun: Universal TUN/TAP device driver, 1.6 [ 0.893239] tun: (C) 1999-2004 Max Krasnyansky [ 0.893295] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.893324] alloc irq_desc for 17 on node 0 [ 0.893326] alloc kstat_irqs on node 0 [ 0.893332] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.893373] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.893397] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.893421] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 0.893433] ehci_hcd 0000:00:12.2: debug port 1 [ 0.893461] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 0.907787] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.907913] usb usb1: configuration #1 chosen from 1 choice [ 0.907935] hub 1-0:1.0: USB hub found [ 0.907942] hub 1-0:1.0: 6 ports detected [ 0.908049] alloc irq_desc for 19 on node 0 [ 0.908050] alloc kstat_irqs on node 0 [ 0.908058] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.908077] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.908102] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.908121] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 0.908134] ehci_hcd 0000:00:13.2: debug port 1 [ 0.908162] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 0.927801] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.927918] usb usb2: configuration #1 chosen from 1 choice [ 0.927938] hub 2-0:1.0: USB hub found [ 0.927944] hub 2-0:1.0: 6 ports detected [ 0.928012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.928072] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.928092] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.928117] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.928149] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 0.991900] usb usb3: configuration #1 chosen from 1 choice [ 0.991926] hub 3-0:1.0: USB hub found [ 0.991934] hub 3-0:1.0: 3 ports detected [ 0.992048] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.992067] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 0.992093] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 0.992109] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.054149] usb usb4: configuration #1 chosen from 1 choice [ 1.054170] hub 4-0:1.0: USB hub found [ 1.054179] hub 4-0:1.0: 3 ports detected [ 1.054297] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.054318] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.054347] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.054379] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.114163] usb usb5: configuration #1 chosen from 1 choice [ 1.114184] hub 5-0:1.0: USB hub found [ 1.114193] hub 5-0:1.0: 3 ports detected [ 1.114306] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.114326] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.114356] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.114372] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.174176] usb usb6: configuration #1 chosen from 1 choice [ 1.174196] hub 6-0:1.0: USB hub found [ 1.174205] hub 6-0:1.0: 3 ports detected [ 1.174322] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.174343] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.174369] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.174385] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.234178] usb usb7: configuration #1 chosen from 1 choice [ 1.234200] hub 7-0:1.0: USB hub found [ 1.234209] hub 7-0:1.0: 2 ports detected [ 1.234263] uhci_hcd: USB Universal Host Controller Interface driver [ 1.234325] PNP: No PS/2 controller found. Probing ports directly. [ 1.234722] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.234727] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.234793] mice: PS/2 mouse device common for all mice [ 1.234867] rtc_cmos 00:05: RTC can wake from S4 [ 1.234897] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.234927] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.235011] device-mapper: uevent: version 1.0.3 [ 1.235113] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.235206] device-mapper: multipath: version 1.1.0 loaded [ 1.235208] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.235386] cpuidle: using governor ladder [ 1.235388] cpuidle: using governor menu [ 1.235637] TCP cubic registered [ 1.235720] NET: Registered protocol family 10 [ 1.236038] lo: Disabled Privacy Extensions [ 1.236229] NET: Registered protocol family 17 [ 1.236290] powernow-k8: Found 1 AMD Athlon(tm) II X4 630 Processor processors (4 cpu cores) (version 2.20.00) [ 1.236326] powernow-k8: 0 : pstate 0 (2800 MHz) [ 1.236327] powernow-k8: 1 : pstate 1 (2100 MHz) [ 1.236328] powernow-k8: 2 : pstate 2 (1600 MHz) [ 1.236329] powernow-k8: 3 : pstate 3 (800 MHz) [ 1.236727] PM: Resume from disk failed. [ 1.236737] registered taskstats version 1 [ 1.237023] Magic number: 10:972:449 [ 1.237122] rtc_cmos 00:05: setting system clock to 2010-09-18 21:24:47 UTC (1284845087) [ 1.237125] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.237126] EDD information not available. [ 1.237167] Freeing unused kernel memory: 880k freed [ 1.237395] Write protecting the kernel read-only data: 7696k [ 1.253715] udev: starting version 151 [ 1.281858] ahci 0000:00:11.0: version 3.0 [ 1.281883] alloc irq_desc for 22 on node 0 [ 1.281885] alloc kstat_irqs on node 0 [ 1.281896] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.282040] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.282043] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.287330] scsi0 : ahci [ 1.289709] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.289735] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.289793] r8169 0000:02:00.0: setting latency timer to 64 [ 1.289825] alloc irq_desc for 27 on node 0 [ 1.289827] alloc kstat_irqs on node 0 [ 1.289839] r8169 0000:02:00.0: irq 27 for MSI/MSI-X [ 1.290533] eth0: RTL8168c/8111c at 0xffffc90000c5c000, 00:1f:d0:d1:86:3c, XID 1c4000c0 IRQ 27 [ 1.303084] scsi1 : ahci [ 1.305617] scsi2 : ahci [ 1.306925] scsi3 : ahci [ 1.307082] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 [ 1.307086] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.307089] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.307092] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.307419] scsi4 : pata_atiixp [ 1.307513] scsi5 : pata_atiixp [ 1.308376] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.308378] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.308884] ohci1394 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.360071] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.570060] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 1.650078] ata2: SATA link down (SStatus 0 SControl 300) [ 1.650109] ata4: SATA link down (SStatus 0 SControl 300) [ 1.755252] usb 4-1: configuration #1 chosen from 1 choice [ 1.757211] hub 4-1:1.0: USB hub found [ 1.759156] hub 4-1:1.0: 4 ports detected [ 1.830044] ata3: softreset failed (device not ready) [ 1.830047] ata3: applying SB600 PMP SRST workaround and retrying [ 2.020053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.022584] ata3.00: ATAPI: Optiarc DVD RW AD-7191S, 1.02, max UDMA/100 [ 2.025923] ata3.00: configured for UDMA/100 [ 2.070169] usb 4-1.1: new low speed USB device using ohci_hcd and address 3 [ 2.203284] usb 4-1.1: configuration #1 chosen from 1 choice [ 2.212502] usbcore: registered new interface driver hiddev [ 2.226383] input: HID 0b38:0010 as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input3 [ 2.226459] generic-usb 0003:0B38:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0b38:0010] on usb-0000:00:12.1-1.1/input0 [ 2.230038] ata1: softreset failed (device not ready) [ 2.230041] ata1: applying SB600 PMP SRST workaround and retrying [ 2.249291] input: HID 0b38:0010 as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1.1/4-1.1:1.1/input/input4 [ 2.249367] generic-usb 0003:0B38:0010.0002: input,hidraw1: USB HID v1.10 Device [HID 0b38:0010] on usb-0000:00:12.1-1.1/input1 [ 2.249396] usbcore: registered new interface driver usbhid [ 2.249399] usbhid: v2.6:USB HID core driver [ 2.290189] usb 4-1.4: new low speed USB device using ohci_hcd and address 4 [ 2.410052] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.422318] usb 4-1.4: configuration #1 chosen from 1 choice [ 2.431439] input: Logitech Trackball as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1.4/4-1.4:1.0/input/input5 [ 2.431517] generic-usb 0003:046D:C404.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:12.1-1.4/input0 [ 2.437150] ata1.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133 [ 2.437153] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.437957] ata1.00: configured for UDMA/133 [ 2.460132] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5 [ 2.460300] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.460406] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.460436] sd 0:0:0:0: [sda] Write Protect is off [ 2.460438] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.460452] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.460560] sda: [ 2.461632] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7191S 1.02 PQ: 0 ANSI: 5 [ 2.464457] sda1 sda2 [ 2.504610] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.690198] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007ea67e00001fd0] [ 2.949474] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 11.749776] udev: starting version 151 [ 11.766193] lp: driver loaded but no devices found [ 11.772043] Adding 3253240k swap on /dev/sda6. Priority:-1 extents:1 across:3253240k [ 11.777055] vga16fb: initializing [ 11.777074] vga16fb: mapped to 0xffff8800000a0000 [ 11.777164] fb0: VGA16 VGA frame buffer device [ 11.833180] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 11.833184] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.860521] parport_pc 00:09: reported by Plug and Play ACPI [ 11.860576] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 11.862771] EDAC MC: Ver: 2.1.0 Sep 16 2010 [ 11.876570] EDAC amd64_edac: Ver: 3.2.0 Sep 16 2010 [ 11.878272] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 11.878282] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 11.878283] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 11.878284] (Note that use of the override may cause unknown side effects.) [ 11.878313] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 11.881069] type=1505 audit(1284859498.135:2): operation="profile_load" pid=636 name="/sbin/dhclient3" [ 11.881268] type=1505 audit(1284859498.135:3): operation="profile_load" pid=636 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.881379] type=1505 audit(1284859498.135:4): operation="profile_load" pid=636 name="/usr/lib/connman/scripts/dhclient-script" [ 11.903026] ppdev: user-space parallel port driver [ 11.941594] lp0: using parport0 (interrupt-driven). [ 11.945997] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.991712] Console: switching to colour frame buffer device 80x30 [ 12.086785] hda_codec: ALC889A: BIOS auto-probing. [ 12.088194] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6 [ 12.100614] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.100668] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 12.275815] type=1505 audit(1284859498.536:5): operation="profile_load" pid=951 name="/usr/share/gdm/guest-session/Xsession" [ 12.277120] type=1505 audit(1284859498.536:6): operation="profile_replace" pid=952 name="/sbin/dhclient3" [ 12.277325] type=1505 audit(1284859498.536:7): operation="profile_replace" pid=952 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.277441] type=1505 audit(1284859498.536:8): operation="profile_replace" pid=952 name="/usr/lib/connman/scripts/dhclient-script" [ 12.279841] type=1505 audit(1284859498.536:9): operation="profile_load" pid=953 name="/usr/bin/evince" [ 12.282429] type=1505 audit(1284859498.536:10): operation="profile_load" pid=953 name="/usr/bin/evince-previewer" [ 12.284038] type=1505 audit(1284859498.546:11): operation="profile_load" pid=953 name="/usr/bin/evince-thumbnailer" [ 12.421030] r8169: eth0: link up [ 12.421035] r8169: eth0: link up