[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 (Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=9161b816-6684-42a4-ac99-635bbe92529a ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] modified: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fef0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fef0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fef0000 @ 10000-14000 [ 0.000000] RAMDISK: 377fc000 - 37feffb9 [ 0.000000] ACPI: RSDP 00000000000f7690 00024 (v02 HP-CPC) [ 0.000000] ACPI: XSDT 000000007fef30c0 00044 (v01 HP-CPC ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007fefa280 000F4 (v03 HP-CPC ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007fef3240 06FDF (v01 HP-CPC ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007fef0000 00040 [ 0.000000] ACPI: SSDT 000000007fefa480 001C4 (v01 HP-CPC POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG 000000007fefa6c0 0003C (v01 HP-CPC ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000007fefa3c0 0007C (v01 HP-CPC ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fef0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fef0000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000026fdf] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fef0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377fc000 - 0037feffb9] RAMDISK ==> [00377fc000 - 0037feffb9] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a301c4] BRK ==> [0001a30000 - 0001a301c4] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f5ad0] f5ad0 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fef0 [ 0.000000] On node 0 totalpages: 523903 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7109 pages used for memmap [ 0.000000] DMA32 zone: 512811 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516636 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=9161b816-6684-42a4-ac99-635bbe92529a ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c1b0000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2047956k/2096064k available (5422k kernel code, 452k absent, 47656k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2004.359 MHz processor. [ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4008.71 BogoMIPS (lpj=20043590) [ 0.020034] Security Framework initialized [ 0.020055] AppArmor: AppArmor initialized [ 0.020279] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.021373] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.021882] Mount-cache hash table entries: 256 [ 0.022023] Initializing cgroup subsys ns [ 0.022027] Initializing cgroup subsys cpuacct [ 0.022032] Initializing cgroup subsys memory [ 0.022040] Initializing cgroup subsys devices [ 0.022043] Initializing cgroup subsys freezer [ 0.022045] Initializing cgroup subsys net_cls [ 0.022064] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.022067] CPU: L2 Cache: 512K (64 bytes/line) [ 0.022069] CPU 0/0x0 -> Node 0 [ 0.022071] tseg: 007ff00000 [ 0.022073] CPU: Physical Processor ID: 0 [ 0.022075] CPU: Processor Core ID: 0 [ 0.022078] mce: CPU supports 5 MCE banks [ 0.022090] using C1E aware idle routine [ 0.022092] Performance Events: AMD PMU driver. [ 0.022097] ... version: 0 [ 0.022099] ... bit width: 48 [ 0.022100] ... generic registers: 4 [ 0.022102] ... value mask: 0000ffffffffffff [ 0.022104] ... max period: 00007fffffffffff [ 0.022106] ... fixed-purpose events: 0 [ 0.022108] ... event mask: 000000000000000f [ 0.023805] ACPI: Core revision 20090903 [ 0.036771] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036777] ftrace: allocating 22529 entries in 89 pages [ 0.040091] Setting APIC routing to flat [ 0.040611] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.060000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.060000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.060000] ..... (found apic 0 pin 0) ... [ 0.080000] ....... failed. [ 0.080000] ...trying to set up timer as Virtual Wire IRQ... [ 0.080000] ..... failed. [ 0.080000] ...trying to set up timer as ExtINT IRQ... [ 0.184581] ..... works. [ 0.184582] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.190000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.340058] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.340083] Brought up 2 CPUs [ 0.340086] Total of 2 processors activated (8017.19 BogoMIPS). [ 0.340296] CPU0 attaching sched-domain: [ 0.340299] domain 0: span 0-1 level MC [ 0.340302] groups: 0 1 [ 0.340307] CPU1 attaching sched-domain: [ 0.340309] domain 0: span 0-1 level MC [ 0.340311] groups: 1 0 [ 0.340397] devtmpfs: initialized [ 0.340397] regulator: core version 0.5 [ 0.340397] Time: 22:28:59 Date: 09/18/10 [ 0.340397] NET: Registered protocol family 16 [ 0.340397] Trying to unpack rootfs image as initramfs... [ 0.340397] node 0 link 0: io port [1000, ffff] [ 0.340397] TOM: 0000000080000000 aka 2048M [ 0.340397] node 0 link 0: mmio [a0000, bffff] [ 0.340397] node 0 link 0: mmio [80000000, efffffff] [ 0.340397] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.340397] node 0 link 0: mmio [f0000000, f03fffff] [ 0.340397] bus: [00,03] on node 0 link 0 [ 0.340397] bus: 00 index 0 io port: [0, ffff] [ 0.340397] bus: 00 index 1 mmio: [a0000, bffff] [ 0.340397] bus: 00 index 2 mmio: [80000000, f3ffffff] [ 0.340397] bus: 00 index 3 mmio: [f4000000, fcffffffff] [ 0.340397] ACPI: bus type pci registered [ 0.340397] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.340397] PCI: MCFG area at f0000000 reserved in E820 [ 0.341525] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.341527] PCI: Using configuration type 1 for base access [ 0.350129] bio: create slab at 0 [ 0.351255] ACPI: EC: Look up EC in DSDT [ 0.360866] ACPI: Interpreter enabled [ 0.360872] ACPI: (supports S0 S1 S3 S4 S5) [ 0.360902] ACPI: Using IOAPIC for interrupt routing [ 0.372312] ACPI: No dock devices found. [ 0.373397] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.373679] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373682] pci 0000:00:02.0: PME# disabled [ 0.373724] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373727] pci 0000:00:04.0: PME# disabled [ 0.373924] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.373971] pci 0000:00:0a.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.373977] pci 0000:00:0a.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.374001] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.374006] pci 0000:00:0a.1: PME# disabled [ 0.374075] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.374104] pci 0000:00:0b.0: supports D1 D2 [ 0.374106] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.374110] pci 0000:00:0b.0: PME# disabled [ 0.374137] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.374168] pci 0000:00:0b.1: supports D1 D2 [ 0.374170] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.374174] pci 0000:00:0b.1: PME# disabled [ 0.374214] pci 0000:00:0d.0: reg 20 io port: [0xf400-0xf40f] [ 0.374260] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.374265] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.374270] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.374275] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.374279] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f] [ 0.374284] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.374334] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7] [ 0.374339] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3] [ 0.374343] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967] [ 0.374348] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63] [ 0.374353] pci 0000:00:0f.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.374358] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.374450] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.374484] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.374488] pci 0000:00:10.1: PME# disabled [ 0.374524] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.374530] pci 0000:00:14.0: reg 14 io port: [0xc800-0xc807] [ 0.374553] pci 0000:00:14.0: supports D1 D2 [ 0.374555] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.374559] pci 0000:00:14.0: PME# disabled [ 0.374692] pci 0000:00:02.0: bridge io port: [0xb000-0xbfff] [ 0.374695] pci 0000:00:02.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.374699] pci 0000:00:02.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] [ 0.374725] pci 0000:02:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.374732] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdbe0000-0xfdbeffff] [ 0.374738] pci 0000:02:00.0: reg 20 io port: [0x9c00-0x9cff] [ 0.374745] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfdbc0000-0xfdbdffff] [ 0.374760] pci 0000:02:00.0: supports D1 D2 [ 0.374788] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdbfc000-0xfdbfffff] [ 0.374816] pci 0000:02:00.1: supports D1 D2 [ 0.374860] pci 0000:00:04.0: bridge io port: [0x9000-0x9fff] [ 0.374863] pci 0000:00:04.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.374867] pci 0000:00:04.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.374902] pci 0000:03:05.0: reg 10 32bit mmio: [0xfddff000-0xfddfffff] [ 0.374938] pci 0000:03:05.0: supports D1 D2 [ 0.374940] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot [ 0.374944] pci 0000:03:05.0: PME# disabled [ 0.374974] pci 0000:03:09.0: reg 10 32bit mmio: [0xfdde0000-0xfddeffff] [ 0.374980] pci 0000:03:09.0: reg 14 io port: [0xac00-0xac07] [ 0.375012] pci 0000:03:09.0: PME# supported from D3hot D3cold [ 0.375016] pci 0000:03:09.0: PME# disabled [ 0.375036] pci 0000:03:0a.0: reg 10 32bit mmio: [0xfddfc000-0xfddfdfff] [ 0.375086] pci 0000:00:10.0: transparent bridge [ 0.375089] pci 0000:00:10.0: bridge io port: [0xa000-0xafff] [ 0.375092] pci 0000:00:10.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.375096] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.375110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.375398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.487286] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.487484] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.487684] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15) [ 0.487879] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.488077] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15) [ 0.488274] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) [ 0.488470] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.488667] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.488868] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.489065] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.489264] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.489460] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.489659] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15) [ 0.489854] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.490074] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.490278] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.490475] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.490672] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.490872] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.491071] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.491323] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.491570] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.491816] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.492060] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.492307] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.492551] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.492797] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.493044] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.493290] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.493537] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.493784] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.494030] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.494277] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.494530] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.494775] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.495022] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.495268] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.495516] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.495766] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.496013] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.496260] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.496413] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.496418] vgaarb: loaded [ 0.496540] SCSI subsystem initialized [ 0.496656] libata version 3.00 loaded. [ 0.496742] usbcore: registered new interface driver usbfs [ 0.496756] usbcore: registered new interface driver hub [ 0.496784] usbcore: registered new device driver usb [ 0.496951] ACPI: WMI: Mapper loaded [ 0.496953] PCI: Using ACPI for IRQ routing [ 0.497146] NetLabel: Initializing [ 0.497148] NetLabel: domain hash size = 128 [ 0.497149] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.497164] NetLabel: unlabeled traffic allowed by default [ 0.499082] AppArmor: AppArmor Filesystem Enabled [ 0.499104] pnp: PnP ACPI init [ 0.499122] ACPI: bus type pnp registered [ 0.505027] pnp: PnP ACPI: found 11 devices [ 0.505029] ACPI: ACPI bus type pnp unregistered [ 0.505042] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.505045] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.505048] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.505051] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.505054] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.505057] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.505060] system 00:01: ioport range 0x2000-0x207f has been reserved [ 0.505063] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 0.505069] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.505072] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.505080] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.505087] system 00:0a: iomem range 0xf0000-0xf3fff could not be reserved [ 0.505090] system 00:0a: iomem range 0xf4000-0xf7fff could not be reserved [ 0.505093] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.505095] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.505098] system 00:0a: iomem range 0x7fef0000-0x7fefffff could not be reserved [ 0.505102] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved [ 0.505105] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.505108] system 00:0a: iomem range 0x100000-0x7feeffff could not be reserved [ 0.505111] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.505114] system 00:0a: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.505118] system 00:0a: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.505121] system 00:0a: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.505124] system 00:0a: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.505127] system 00:0a: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.509842] Switching to clocksource acpi_pm [ 0.510098] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.510101] pci 0000:00:02.0: IO window: 0xb000-0xbfff [ 0.510104] pci 0000:00:02.0: MEM window: 0xfda00000-0xfdafffff [ 0.510108] pci 0000:00:02.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.510112] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.510115] pci 0000:00:04.0: IO window: 0x9000-0x9fff [ 0.510118] pci 0000:00:04.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.510121] pci 0000:00:04.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.510126] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.510129] pci 0000:00:10.0: IO window: 0xa000-0xafff [ 0.510132] pci 0000:00:10.0: MEM window: 0xfdd00000-0xfddfffff [ 0.510136] pci 0000:00:10.0: PREFETCH window: 0xfdc00000-0xfdcfffff [ 0.510146] pci 0000:00:02.0: setting latency timer to 64 [ 0.510152] pci 0000:00:04.0: setting latency timer to 64 [ 0.510157] pci 0000:00:10.0: setting latency timer to 64 [ 0.510161] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.510164] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.510167] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.510170] pci_bus 0000:01: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.510172] pci_bus 0000:01: resource 2 pref mem [0xfde00000-0xfdefffff] [ 0.510175] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff] [ 0.510178] pci_bus 0000:02: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.510180] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.510183] pci_bus 0000:03: resource 0 io: [0xa000-0xafff] [ 0.510186] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.510189] pci_bus 0000:03: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.510191] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.510194] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.510233] NET: Registered protocol family 2 [ 0.510374] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.511355] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.513260] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.513784] TCP: Hash tables configured (established 262144 bind 65536) [ 0.513788] TCP reno registered [ 0.513893] NET: Registered protocol family 1 [ 0.513951] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.513974] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.560072] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.560081] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.560138] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.560146] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.560207] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.560213] pci 0000:00:10.0: Enabling HT MSI Mapping [ 0.560275] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.560284] pci 0000:00:10.1: Enabling HT MSI Mapping [ 0.560303] pci 0000:02:00.0: Boot video device [ 0.560696] Scanning for low memory corruption every 60 seconds [ 0.560834] audit: initializing netlink socket (disabled) [ 0.560846] type=2000 audit(1284848938.552:1): initialized [ 0.561998] Freeing initrd memory: 8143k freed [ 0.570364] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.572133] VFS: Disk quotas dquot_6.5.2 [ 0.572197] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.573012] fuse init (API version 7.13) [ 0.573116] msgmni has been set to 4015 [ 0.573436] alg: No test for stdrng (krng) [ 0.573504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.573507] io scheduler noop registered [ 0.573509] io scheduler anticipatory registered [ 0.573511] io scheduler deadline registered [ 0.573557] io scheduler cfq registered (default) [ 0.573753] alloc irq_desc for 24 on node 0 [ 0.573756] alloc kstat_irqs on node 0 [ 0.573764] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.573770] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.573908] alloc irq_desc for 25 on node 0 [ 0.573910] alloc kstat_irqs on node 0 [ 0.573915] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X [ 0.573919] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.573989] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.574017] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.574144] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.574148] ACPI: Power Button [PWRB] [ 0.574217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.574220] ACPI: Power Button [PWRF] [ 0.574284] fan PNP0C0B:00: registered as cooling_device0 [ 0.574290] ACPI: Fan [FAN] (on) [ 0.574917] processor LNXCPU:00: registered as cooling_device1 [ 0.574956] processor LNXCPU:01: registered as cooling_device2 [ 0.582275] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.582282] ACPI: Thermal Zone [THRM] (40 C) [ 0.583887] Linux agpgart interface v0.103 [ 0.583931] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.585323] brd: module loaded [ 0.585842] loop: module loaded [ 0.585939] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.586238] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 0.586787] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.586792] alloc irq_desc for 23 on node 0 [ 0.586794] alloc kstat_irqs on node 0 [ 0.586805] pata_acpi 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.586824] pata_acpi 0000:00:0e.0: setting latency timer to 64 [ 0.586833] pata_acpi 0000:00:0e.0: PCI INT A disabled [ 0.587288] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.587291] alloc irq_desc for 22 on node 0 [ 0.587293] alloc kstat_irqs on node 0 [ 0.587301] pata_acpi 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.587325] pata_acpi 0000:00:0f.0: setting latency timer to 64 [ 0.587333] pata_acpi 0000:00:0f.0: PCI INT A disabled [ 0.587845] Fixed MDIO Bus: probed [ 0.587885] PPP generic driver version 2.4.2 [ 0.587941] tun: Universal TUN/TAP device driver, 1.6 [ 0.587943] tun: (C) 1999-2004 Max Krasnyansky [ 0.588041] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.588511] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.588515] alloc irq_desc for 21 on node 0 [ 0.588516] alloc kstat_irqs on node 0 [ 0.588526] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 0.588541] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 0.588544] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.588582] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 0.588610] ehci_hcd 0000:00:0b.1: debug port 1 [ 0.588619] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 0.588642] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000 [ 0.610032] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.610127] usb usb1: configuration #1 chosen from 1 choice [ 0.610161] hub 1-0:1.0: USB hub found [ 0.610169] hub 1-0:1.0: 8 ports detected [ 0.610256] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.610725] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 0.610728] alloc irq_desc for 20 on node 0 [ 0.610730] alloc kstat_irqs on node 0 [ 0.610739] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 0.610753] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.610756] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.610801] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.610830] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000 [ 0.662102] usb usb2: configuration #1 chosen from 1 choice [ 0.662128] hub 2-0:1.0: USB hub found [ 0.662137] hub 2-0:1.0: 8 ports detected [ 0.662209] uhci_hcd: USB Universal Host Controller Interface driver [ 0.662299] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.664960] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.664967] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.665097] mice: PS/2 mouse device common for all mice [ 0.665214] rtc_cmos 00:04: RTC can wake from S4 [ 0.665262] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.665294] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.665435] device-mapper: uevent: version 1.0.3 [ 0.665565] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.665678] device-mapper: multipath: version 1.1.0 loaded [ 0.665681] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.665928] cpuidle: using governor ladder [ 0.665930] cpuidle: using governor menu [ 0.666325] TCP cubic registered [ 0.666474] NET: Registered protocol family 10 [ 0.666969] lo: Disabled Privacy Extensions [ 0.667278] NET: Registered protocol family 17 [ 0.667319] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 0.667372] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xc [ 0.667374] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xe [ 0.667377] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 0.667507] PM: Resume from disk failed. [ 0.667521] registered taskstats version 1 [ 0.667910] Magic number: 10:631:502 [ 0.668011] rtc_cmos 00:04: setting system clock to 2010-09-18 22:28:59 UTC (1284848939) [ 0.668014] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.668015] EDD information not available. [ 0.668077] Freeing unused kernel memory: 880k freed [ 0.668476] Write protecting the kernel read-only data: 7696k [ 0.689104] udev: starting version 151 [ 0.693894] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.773370] pata_amd 0000:00:0d.0: version 0.4.1 [ 0.773420] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 0.775148] scsi0 : pata_amd [ 0.777103] scsi1 : pata_amd [ 0.777959] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14 [ 0.777962] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15 [ 0.778199] sata_nv 0000:00:0e.0: version 3.5 [ 0.778211] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.778214] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 0.778266] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 0.779861] scsi2 : sata_nv [ 0.779974] scsi3 : sata_nv [ 0.780300] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23 [ 0.780303] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23 [ 0.780427] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.780860] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 0.780865] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 0.780871] forcedeth 0000:00:14.0: setting latency timer to 64 [ 0.780922] nv_probe: set workaround bit for reversed mac addr [ 0.804231] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 0.804239] alloc irq_desc for 18 on node 0 [ 0.804241] alloc kstat_irqs on node 0 [ 0.804254] b43-pci-bridge 0000:03:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 0.920027] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 0.920106] ssb: Sonics Silicon Backplane found on PCI device 0000:03:0a.0 [ 0.950354] ata1.00: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66 [ 0.950382] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13) [ 0.990304] ata1.00: configured for UDMA/66 [ 0.991518] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7170A 1.02 PQ: 0 ANSI: 5 [ 0.994062] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.994065] Uniform CD-ROM driver Revision: 3.20 [ 0.994186] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.994259] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.072002] usb 1-4: configuration #1 chosen from 1 choice [ 1.080051] Initializing USB Mass Storage driver... [ 1.080217] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.080329] usbcore: registered new interface driver usb-storage [ 1.080332] USB Mass Storage support registered. [ 1.080338] usb-storage: device found at 2 [ 1.080340] usb-storage: waiting for device to settle before scanning [ 1.190025] usb 1-7: new high speed USB device using ehci_hcd and address 3 [ 1.270047] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.290299] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7 [ 1.290302] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.310856] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:1e:47:61 [ 1.310860] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 1.311264] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1.311268] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 1.311326] ata3.00: configured for UDMA/133 [ 1.311331] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 1.311433] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5 [ 1.311628] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.311647] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.311738] sd 2:0:0:0: [sda] Write Protect is off [ 1.311741] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.311768] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.311922] scsi5 : sata_nv [ 1.311972] sda: [ 1.312059] scsi6 : sata_nv [ 1.312321] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22 [ 1.312324] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22 [ 1.318925] sda1 sda2 sda3 < sda5 > sda4 [ 1.336732] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.343257] usb 1-7: configuration #1 chosen from 1 choice [ 1.343630] scsi7 : SCSI emulation for USB Mass Storage devices [ 1.343784] usb-storage: device found at 3 [ 1.343786] usb-storage: waiting for device to settle before scanning [ 1.460026] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 1.624538] usb 1-8: configuration #1 chosen from 1 choice [ 1.626301] scsi8 : SCSI emulation for USB Mass Storage devices [ 1.626448] usb-storage: device found at 4 [ 1.626450] usb-storage: waiting for device to settle before scanning [ 1.650583] ata5: SATA link down (SStatus 0 SControl 310) [ 1.653068] ata4: SATA link down (SStatus 0 SControl 310) [ 1.990565] ata6: SATA link down (SStatus 0 SControl 310) [ 1.996205] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 1.996213] alloc irq_desc for 19 on node 0 [ 1.996215] alloc kstat_irqs on node 0 [ 1.996228] ohci1394 0000:03:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 2.062073] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fddff000-fddff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 2.358328] EXT4-fs (sda4): mounted filesystem with ordered data mode [ 3.380387] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000112c348] [ 6.080260] usb-storage: device scan complete [ 6.081959] scsi 4:0:0:0: Direct-Access WD My Passport 070A 2003 PQ: 0 ANSI: 4 [ 6.082693] scsi 4:0:0:1: CD-ROM WD Virtual CD 070A 2003 PQ: 0 ANSI: 4 [ 6.083442] scsi 4:0:0:2: Enclosure WD SES Device 2003 PQ: 0 ANSI: 4 [ 6.083990] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 6.084816] sd 4:0:0:0: [sdb] 623769600 512-byte logical blocks: (319 GB/297 GiB) [ 6.086813] sr1: scsi3-mmc drive: 51x/51x caddy [ 6.086928] sr 4:0:0:1: Attached scsi CD-ROM sr1 [ 6.086975] sr 4:0:0:1: Attached scsi generic sg3 type 5 [ 6.087088] scsi 4:0:0:2: Attached scsi generic sg4 type 13 [ 6.088807] sd 4:0:0:0: [sdb] Write Protect is off [ 6.088811] sd 4:0:0:0: [sdb] Mode Sense: 23 00 10 00 [ 6.088813] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 6.091805] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 6.091809] sdb: sdb1 [ 6.095806] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 6.095810] sd 4:0:0:0: [sdb] Attached SCSI disk [ 6.340239] usb-storage: device scan complete [ 6.341948] scsi 7:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 6.342444] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 6.343061] sd 7:0:0:0: [sdc] 2015232 512-byte logical blocks: (1.03 GB/984 MiB) [ 6.343806] sd 7:0:0:0: [sdc] Write Protect is off [ 6.343809] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 6.343811] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 6.346805] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 6.346808] sdc: sdc1 [ 6.349806] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 6.349809] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 6.620243] usb-storage: device scan complete [ 6.627074] scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 6.634068] scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 6.641193] scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 6.648318] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 6.648843] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 6.648984] sd 8:0:0:1: Attached scsi generic sg7 type 0 [ 6.649119] sd 8:0:0:2: Attached scsi generic sg8 type 0 [ 6.649266] sd 8:0:0:3: Attached scsi generic sg9 type 0 [ 6.653561] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 6.654311] sd 8:0:0:1: [sde] Attached SCSI removable disk [ 6.655060] sd 8:0:0:2: [sdf] Attached SCSI removable disk [ 6.655935] sd 8:0:0:3: [sdg] Attached SCSI removable disk [ 11.760965] udev: starting version 151 [ 11.813392] Adding 476152k swap on /dev/sda5. Priority:-1 extents:1 across:476152k [ 11.881341] lp: driver loaded but no devices found [ 11.895992] ACPI: resource nForce2_smbus [0x4c00-0x4c3f] conflicts with ACPI region SM00 [0x004c00-0x004c05] [ 11.895997] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.896000] nForce2_smbus 0000:00:0a.1: Error probing SMB1. [ 11.896114] i2c i2c-0: nForce2 SMBus adapter at 0x4c40 [ 12.158384] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 12.169421] [drm] Initialized drm 1.1.0 20060810 [ 12.191457] cfg80211: Calling CRDA to update world regulatory domain [ 12.193424] type=1505 audit(1284838151.022:2): operation="profile_load" pid=746 name="/sbin/dhclient3" [ 12.193708] type=1505 audit(1284838151.022:3): operation="profile_load" pid=746 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.193868] type=1505 audit(1284838151.022:4): operation="profile_load" pid=746 name="/usr/lib/connman/scripts/dhclient-script" [ 12.198182] EDAC MC: Ver: 2.1.0 Sep 16 2010 [ 12.242189] ses 4:0:0:2: Attached Enclosure device [ 12.273016] EDAC amd64_edac: Ver: 3.2.0 Sep 16 2010 [ 12.285077] cfg80211: World regulatory domain updated: [ 12.285081] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.285085] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.285088] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.285090] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.285093] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.285096] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.295192] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 12.295204] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 12.295206] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 12.295208] (Note that use of the override may cause unknown side effects.) [ 12.295244] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 12.304066] [drm] radeon defaulting to kernel modesetting. [ 12.304071] [drm] radeon kernel modesetting enabled. [ 12.307639] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 12.307647] alloc irq_desc for 16 on node 0 [ 12.307649] alloc kstat_irqs on node 0 [ 12.307661] radeon 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 12.307668] radeon 0000:02:00.0: setting latency timer to 64 [ 12.311296] [drm] radeon: Initializing kernel modesetting. [ 12.313232] [drm] register mmio base: 0xFDBE0000 [ 12.313235] [drm] register mmio size: 65536 [ 12.313642] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 12.313662] ATOM BIOS: 954F.11.22.6.0.AS04 [ 12.313685] [drm] Clocks initialized ! [ 12.313897] [drm] Detected VRAM RAM=256M, BAR=256M [ 12.313902] [drm] RAM width 64bits DDR [ 12.324776] [TTM] Zone kernel: Available graphics memory: 1028490 kiB. [ 12.324800] [drm] radeon: 256M of VRAM memory ready [ 12.324803] [drm] radeon: 512M of GTT memory ready. [ 12.324843] alloc irq_desc for 26 on node 0 [ 12.324845] alloc kstat_irqs on node 0 [ 12.324856] radeon 0000:02:00.0: irq 26 for MSI/MSI-X [ 12.324861] [drm] radeon: using MSI. [ 12.324894] [drm] radeon: irq initialized. [ 12.324897] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 12.326004] [drm] Loading RV710 Microcode [ 12.326011] platform radeon_cp.0: firmware: requesting radeon/RV710_pfp.bin [ 12.338158] platform radeon_cp.0: firmware: requesting radeon/RV710_me.bin [ 12.346052] platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin [ 12.463056] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 12.463064] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 12.463069] hda_intel: Disable MSI for Nvidia chipset [ 12.463095] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 12.463139] [drm] ring test succeeded in 1 usecs [ 12.463308] [drm] radeon: ib pool ready. [ 12.463410] [drm] ib test succeeded in 0 usecs [ 12.463627] [drm] Radeon Display Connectors [ 12.463629] [drm] Connector 0: [ 12.463631] [drm] HDMI-A [ 12.463632] [drm] HPD1 [ 12.463635] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 12.463637] [drm] Encoders: [ 12.463639] [drm] DFP1: INTERNAL_UNIPHY [ 12.463640] [drm] Connector 1: [ 12.463642] [drm] VGA [ 12.463644] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 12.463646] [drm] Encoders: [ 12.463647] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 12.463649] [drm] Connector 2: [ 12.463650] [drm] DVI-I [ 12.463651] [drm] HPD4 [ 12.463654] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [ 12.463655] [drm] Encoders: [ 12.463657] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 12.463659] [drm] DFP2: INTERNAL_UNIPHY2 [ 12.486358] phy0: Selected rate control algorithm 'minstrel' [ 12.487227] Registered led device: b43-phy0::tx [ 12.487248] Registered led device: b43-phy0::rx [ 12.487269] Registered led device: b43-phy0::radio [ 12.487345] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 12.602226] [drm] fb mappable at 0xE0141000 [ 12.602230] [drm] vram apper at 0xE0000000 [ 12.602231] [drm] size 5242880 [ 12.602233] [drm] fb depth is 24 [ 12.602235] [drm] pitch is 5120 [ 12.602335] fb0: radeondrmfb frame buffer device [ 12.602337] registered panic notifier [ 12.602343] [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0 [ 12.604447] vga16fb: initializing [ 12.604452] vga16fb: mapped to 0xffff8800000a0000 [ 12.604459] vga16fb: not registering due to another framebuffer present [ 12.636886] Console: switching to colour frame buffer device 160x64 [ 12.803381] type=1505 audit(1284838151.632:5): operation="profile_load" pid=1068 name="/usr/share/gdm/guest-session/Xsession" [ 12.808692] type=1505 audit(1284838151.632:6): operation="profile_replace" pid=1070 name="/sbin/dhclient3" [ 12.809031] type=1505 audit(1284838151.632:7): operation="profile_replace" pid=1070 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.809217] type=1505 audit(1284838151.632:8): operation="profile_replace" pid=1070 name="/usr/lib/connman/scripts/dhclient-script" [ 12.813398] type=1505 audit(1284838151.642:9): operation="profile_load" pid=1071 name="/usr/bin/evince" [ 12.817035] type=1505 audit(1284838151.642:10): operation="profile_load" pid=1071 name="/usr/bin/evince-previewer" [ 12.828101] type=1505 audit(1284838151.652:11): operation="profile_load" pid=1071 name="/usr/bin/evince-thumbnailer" [ 12.922547] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 12.946988] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 12.971401] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 12.982642] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 13.111980] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 13.142709] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)