X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu Current Operating System: Linux elsa 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:05:27 UTC 2010 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=266dedad-4766-47d1-905f-40094be6e781 ro quiet splash Build Date: 21 July 2010 01:03:39PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 18 12:00:23 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:68b8:1002:2543 ATI Technologies Inc Juniper [Radeon HD 5700 Series] rev 0, Mem @ 0xd0000000/268435456, 0xfdec0000/131072, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072 (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 (==) Matched ati as autoconfigured driver 0 (==) Matched vesa as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2 (==) Assigned the driver to the xf86ConfigLayout (WW) Warning, couldn't open module ati (EE) Failed to load module "ati" (module does not exist, 0) (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.6, module version = 2.3.0 (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.6, module version = 0.4.1 (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (WW) Falling back to old probe method for fbdev (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.6, module version = 0.0.2 (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 (II) VESA(0): initializing int10 (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) VESA(0): Depth 24, (--) framebuffer bpp 32 (==) VESA(0): RGB weight 888 (==) VESA(0): Default visual is TrueColor (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0) (II) VESA(0): VESA VBE DDC supported (II) VESA(0): Manufacturer: DEL Model: 3001 Serial#: 1093749575 (II) VESA(0): Year: 2000 Week: 49 (II) VESA(0): EDID Version: 1.3 (II) VESA(0): Digital Display Input (II) VESA(0): Max Image Size [cm]: horiz.: 34 vert.: 27 (II) VESA(0): Gamma: 2.40 (II) VESA(0): DPMS capabilities: Off (II) VESA(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) VESA(0): First detailed timing is preferred mode (II) VESA(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581 (II) VESA(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339 (II) VESA(0): Supported established timings: (II) VESA(0): 720x400@70Hz (II) VESA(0): 640x480@60Hz (II) VESA(0): 640x480@75Hz (II) VESA(0): 800x600@60Hz (II) VESA(0): 800x600@75Hz (II) VESA(0): 1024x768@60Hz (II) VESA(0): 1024x768@75Hz (II) VESA(0): 1280x1024@75Hz (II) VESA(0): Manufacturer's mask: 0 (II) VESA(0): Supported detailed timing: (II) VESA(0): clock: 108.0 MHz Image Size: 338 x 270 mm (II) VESA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) VESA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) VESA(0): Serial No: 06HRM0C9A1KG (II) VESA(0): Monitor name: DELL 1701FP (II) VESA(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 80 kHz, (II) VESA(0): EDID (in hex): (II) VESA(0): 00ffffffffffff0010ac0130474b3141 (II) VESA(0): 310a010380221b8c2a6f8ba25a4d9424 (II) VESA(0): 1a5156a54b0001010101010101010101 (II) VESA(0): 010101010101302a009851002a403070 (II) VESA(0): 1300520e1100001e000000ff00303648 (II) VESA(0): 524d30433941314b470a000000fc0044 (II) VESA(0): 454c4c203137303146500a20000000fd (II) VESA(0): 00384c1e50ff000a2020202020200034 (II) VESA(0): EDID vendor "DEL", prod id 12289 (II) VESA(0): Using EDID range info for horizontal sync (II) VESA(0): Using EDID range info for vertical refresh (II) VESA(0): Printing DDC gathered Modelines: (II) VESA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) VESA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) VESA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) VESA(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) VESA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) VESA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) VESA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) VESA(0): : Using hsync range of 30.00-80.00 kHz (II) VESA(0): : Using vrefresh range of 56.00-76.00 Hz (WW) VESA(0): Unable to estimate virtual size (II) VESA(0): Not using built-in mode "1280x960" (no mode of this name) (II) VESA(0): Not using built-in mode "1152x864" (no mode of this name) (II) VESA(0): Not using built-in mode "640x350" (no mode of this name) (II) VESA(0): Not using built-in mode "512x384" (no mode of this name) (II) VESA(0): Not using built-in mode "320x240" (no mode of this name) (II) VESA(0): Not using built-in mode "320x200" (no mode of this name) (--) VESA(0): Virtual size is 1280x1024 (pitch 1280) (**) VESA(0): *Built-in mode "1280x1024" (**) VESA(0): *Built-in mode "1024x768" (**) VESA(0): *Built-in mode "800x600" (**) VESA(0): *Built-in mode "640x480" (**) VESA(0): *Built-in mode "720x400" (**) VESA(0): Display dimensions: (340, 270) mm (**) VESA(0): DPI set to (95, 96) (**) VESA(0): Using "Shadow Framebuffer" (II) Loading /usr/lib/xorg/modules/libshadow.so (II) Module shadow: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (II) VESA(0): initializing int10 (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): Setting up VESA Mode 0x124 (1280x1024) (II) VESA(0): VBESetVBEMode failed, mode set without customized refresh. (==) VESA(0): Default visual is TrueColor (==) VESA(0): Backing store disabled (==) VESA(0): DPMS enabled (==) RandR enabled (EE) GLX error: Can not get required symbols. (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6, module version = 2.3.2 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (II) XKB: reuse xkmfile /var/lib/xkb/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/udev: Adding input device Power Button (/dev/input/event0) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/event4) (**) Logitech USB RECEIVER: Applying InputClass "evdev pointer catchall" (**) Logitech USB RECEIVER: always reports core events (**) Logitech USB RECEIVER: Device: "/dev/input/event4" (II) Logitech USB RECEIVER: Found 20 mouse buttons (II) Logitech USB RECEIVER: Found scroll wheel(s) (II) Logitech USB RECEIVER: Found relative axes (II) Logitech USB RECEIVER: Found x and y relative axes (II) Logitech USB RECEIVER: Configuring as mouse (**) Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5 (**) Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB RECEIVER" (type: MOUSE) (II) Logitech USB RECEIVER: initialized for relative axes. (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2) (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring)