[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 (Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=b1505ad9-fefd-42a8-92ff-03d10bee782d ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back [ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfdf0000 (usable) [ 0.000000] modified: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS) [ 0.000000] modified: 00000000cfdf1000 - 00000000cfe00000 (ACPI data) [ 0.000000] modified: 00000000cfe00000 - 00000000cff00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfdf0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfdf0000 page 4k [ 0.000000] kernel direct mapping tables up to cfdf0000 @ 8000-b000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ a000-c000 [ 0.000000] RAMDISK: 377fc000 - 37fef65c [ 0.000000] ACPI: RSDP 00000000000f5c30 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfdf1000 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfdf1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfdf1100 07983 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfdf0000 00040 [ 0.000000] ACPI: SSDT 00000000cfdf8b80 00EDC (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfdf9a80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfdf9ac0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 00000000cfdf9b00 00034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000cfdf9b70 0037A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000cfdf8ac0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 0000000000035fff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377fc000 - 0037fef65c] RAMDISK ==> [00377fc000 - 0037fef65c] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a300f6] BRK ==> [0001a30000 - 0001a300f6] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f4220] f4220 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfdf0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1047946 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833064 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u262144 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030820 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=b1505ad9-fefd-42a8-92ff-03d10bee782d ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4047060k/4980736k available (5422k kernel code, 788952k absent, 144724k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:472 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3315.140 MHz processor. [ 0.010004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.68 BogoMIPS (lpj=28128430) [ 0.010018] Security Framework initialized [ 0.010028] AppArmor: AppArmor initialized [ 0.010207] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011023] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011384] Mount-cache hash table entries: 256 [ 0.011454] Initializing cgroup subsys ns [ 0.011457] Initializing cgroup subsys cpuacct [ 0.011459] Initializing cgroup subsys memory [ 0.011463] Initializing cgroup subsys devices [ 0.011464] Initializing cgroup subsys freezer [ 0.011465] Initializing cgroup subsys net_cls [ 0.011475] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.011477] CPU: L2 Cache: 512K (64 bytes/line) [ 0.011478] CPU 0/0x0 -> Node 0 [ 0.011480] tseg: 00cff00000 [ 0.011481] CPU: Physical Processor ID: 0 [ 0.011482] CPU: Processor Core ID: 0 [ 0.011483] mce: CPU supports 6 MCE banks [ 0.011489] using C1E aware idle routine [ 0.011490] Performance Events: AMD PMU driver. [ 0.011492] ... version: 0 [ 0.011493] ... bit width: 48 [ 0.011494] ... generic registers: 4 [ 0.011494] ... value mask: 0000ffffffffffff [ 0.011495] ... max period: 00007fffffffffff [ 0.011496] ... fixed-purpose events: 0 [ 0.011497] ... event mask: 000000000000000f [ 0.012423] ACPI: Core revision 20090903 [ 0.030016] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030022] ftrace: allocating 22529 entries in 89 pages [ 0.040052] Setting APIC routing to flat [ 0.040370] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.143283] CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00 [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.300053] CPU1: AMD Phenom(tm) II X6 1055T Processor stepping 00 [ 0.300057] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.310013] System has AMD C1E enabled [ 0.310021] Switch to broadcast mode on CPU1 [ 0.310038] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.020000] Initializing CPU#2 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 2/0x2 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 5 [ 0.470018] CPU2: AMD Phenom(tm) II X6 1055T Processor stepping 00 [ 0.470021] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.480014] Switch to broadcast mode on CPU2 [ 0.480043] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.020000] Initializing CPU#3 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 3/0x3 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 3 [ 0.640082] CPU3: AMD Phenom(tm) II X6 1055T Processor stepping 00 [ 0.640085] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.650028] Switch to broadcast mode on CPU3 [ 0.650060] Booting processor 4 APIC 0x4 ip 0x6000 [ 0.020000] Initializing CPU#4 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 4/0x4 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 2 [ 0.810077] CPU4: AMD Phenom(tm) II X6 1055T Processor stepping 00 [ 0.810080] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.820030] Switch to broadcast mode on CPU4 [ 0.820064] Booting processor 5 APIC 0x5 ip 0x6000 [ 0.020000] Initializing CPU#5 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 5/0x5 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 4 [ 0.980081] CPU5: AMD Phenom(tm) II X6 1055T Processor stepping 00 [ 0.980084] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.990035] Brought up 6 CPUs [ 0.990037] Total of 6 processors activated (33754.29 BogoMIPS). [ 0.990034] Switch to broadcast mode on CPU5 [ 0.992520] CPU0 attaching sched-domain: [ 0.992522] domain 0: span 0-5 level MC [ 0.992524] groups: 0 1 2 3 4 5 [ 0.992528] CPU1 attaching sched-domain: [ 0.992529] domain 0: span 0-5 level MC [ 0.992530] groups: 1 2 3 4 5 0 [ 0.992533] CPU2 attaching sched-domain: [ 0.992534] domain 0: span 0-5 level MC [ 0.992535] groups: 2 3 4 5 0 1 [ 0.992538] CPU3 attaching sched-domain: [ 0.992539] domain 0: span 0-5 level MC [ 0.992540] groups: 3 4 5 0 1 2 [ 0.992543] CPU4 attaching sched-domain: [ 0.992544] domain 0: span 0-5 level MC [ 0.992545] groups: 4 5 0 1 2 3 [ 0.992548] CPU5 attaching sched-domain: [ 0.992549] domain 0: span 0-5 level MC [ 0.992550] groups: 5 0 1 2 3 4 [ 0.992629] Switch to broadcast mode on CPU0 [ 0.992629] devtmpfs: initialized [ 0.992629] regulator: core version 0.5 [ 0.992629] Time: 10:56:46 Date: 09/18/10 [ 0.992629] NET: Registered protocol family 16 [ 0.992629] node 0 link 0: io port [7000, ffff] [ 0.992629] Trying to unpack rootfs image as initramfs... [ 0.992629] TOM: 00000000d0000000 aka 3328M [ 0.992629] Fam 10h mmconf [e0000000, e00fffff] [ 0.992629] node 0 link 0: mmio [a0000, bffff] [ 0.992629] node 0 link 0: mmio [d0000000, dfffffff] [ 0.992629] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.992629] node 0 link 0: mmio [e0000000, e08fffff] ==> [e0100000, e08fffff] [ 0.992629] TOM2: 0000000130000000 aka 4864M [ 0.992629] bus: [00,08] on node 0 link 0 [ 0.992629] bus: 00 index 0 io port: [0, ffff] [ 0.992629] bus: 00 index 1 mmio: [a0000, bffff] [ 0.992629] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.992629] bus: 00 index 3 mmio: [e0900000, ffffffff] [ 0.992629] bus: 00 index 4 mmio: [e0100000, e08fffff] [ 0.992629] bus: 00 index 5 mmio: [130000000, fcffffffff] [ 0.992629] ACPI: bus type pci registered [ 0.992629] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.992629] PCI: MCFG area at e0000000 reserved in E820 [ 0.995191] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.995192] PCI: Using configuration type 1 for base access [ 1.000020] bio: create slab at 0 [ 1.000331] ACPI: EC: Look up EC in DSDT [ 1.002210] ACPI Warning: Package List length (0x1) larger than NumElements count (0x0), truncated [ 1.002212] (20090903/dsobject-515) [ 1.002216] ACPI Warning: Package List length (0x1) larger than NumElements count (0x0), truncated [ 1.002218] (20090903/dsobject-515) [ 1.002248] ACPI Warning: Package List length (0x1) larger than NumElements count (0x0), truncated [ 1.002249] (20090903/dsobject-515) [ 1.002253] ACPI Warning: Package List length (0x1) larger than NumElements count (0x0), truncated [ 1.002255] (20090903/dsobject-515) [ 1.006768] ACPI: Interpreter enabled [ 1.006772] ACPI: (supports S0 S3 S4 S5) [ 1.006785] ACPI: Using IOAPIC for interrupt routing [ 1.011607] ACPI Warning: Incorrect checksum in table [TAMG] - C3, should be C2 (20090903/tbutils-314) [ 1.011680] ACPI: No dock devices found. [ 1.011752] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.011781] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 1.011821] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.011823] pci 0000:00:02.0: PME# disabled [ 1.011848] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.011850] pci 0000:00:09.0: PME# disabled [ 1.011871] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.011872] pci 0000:00:0a.0: PME# disabled [ 1.011905] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] [ 1.011909] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] [ 1.011912] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] [ 1.011916] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] [ 1.011920] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] [ 1.011924] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] [ 1.011934] pci 0000:00:11.0: set SATA to AHCI mode [ 1.011966] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] [ 1.012008] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02d000-0xfe02d0ff] [ 1.012038] pci 0000:00:12.2: supports D1 D2 [ 1.012039] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.012041] pci 0000:00:12.2: PME# disabled [ 1.012060] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff] [ 1.012102] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02b000-0xfe02b0ff] [ 1.012132] pci 0000:00:13.2: supports D1 D2 [ 1.012133] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.012135] pci 0000:00:13.2: PME# disabled [ 1.012183] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 1.012187] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 1.012191] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 1.012195] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 1.012198] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] [ 1.012231] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] [ 1.012255] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.012257] pci 0000:00:14.2: PME# disabled [ 1.012317] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 1.012373] pci 0000:00:15.0: supports D1 D2 [ 1.012413] pci 0000:00:15.1: supports D1 D2 [ 1.012453] pci 0000:00:15.2: supports D1 D2 [ 1.012493] pci 0000:00:15.3: supports D1 D2 [ 1.012514] pci 0000:00:16.0: reg 10 32bit mmio: [0xfe029000-0xfe029fff] [ 1.012556] pci 0000:00:16.2: reg 10 32bit mmio: [0xfe028000-0xfe0280ff] [ 1.012585] pci 0000:00:16.2: supports D1 D2 [ 1.012586] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 1.012588] pci 0000:00:16.2: PME# disabled [ 1.012659] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.012665] pci 0000:01:00.0: reg 18 64bit mmio: [0xfdec0000-0xfdedffff] [ 1.012668] pci 0000:01:00.0: reg 20 io port: [0xee00-0xeeff] [ 1.012673] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 1.012685] pci 0000:01:00.0: supports D1 D2 [ 1.012707] pci 0000:01:00.1: reg 10 64bit mmio: [0xfdefc000-0xfdefffff] [ 1.012729] pci 0000:01:00.1: supports D1 D2 [ 1.012762] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 1.012763] pci 0000:00:02.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 1.012766] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.012793] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdbfe000-0xfdbfffff] [ 1.012826] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.012828] pci 0000:02:00.0: PME# disabled [ 1.012862] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff] [ 1.012864] pci 0000:00:09.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 1.012866] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfd200000-0xfd2fffff] [ 1.012919] pci 0000:03:00.0: reg 24 32bit mmio: [0xfd1fe000-0xfd1fffff] [ 1.012942] pci 0000:03:00.0: PME# supported from D3hot [ 1.012944] pci 0000:03:00.0: PME# disabled [ 1.012977] pci 0000:03:00.1: reg 10 io port: [0xcf00-0xcf07] [ 1.012982] pci 0000:03:00.1: reg 14 io port: [0xce00-0xce03] [ 1.012987] pci 0000:03:00.1: reg 18 io port: [0xcd00-0xcd07] [ 1.012992] pci 0000:03:00.1: reg 1c io port: [0xcc00-0xcc03] [ 1.012997] pci 0000:03:00.1: reg 20 io port: [0xcb00-0xcb0f] [ 1.013055] pci 0000:00:0a.0: bridge io port: [0xc000-0xcfff] [ 1.013057] pci 0000:00:0a.0: bridge 32bit mmio: [0xfd100000-0xfd1fffff] [ 1.013059] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 1.013102] pci 0000:04:0e.0: reg 10 32bit mmio: [0xfddff000-0xfddff7ff] [ 1.013107] pci 0000:04:0e.0: reg 14 32bit mmio: [0xfddf8000-0xfddfbfff] [ 1.013144] pci 0000:04:0e.0: supports D1 D2 [ 1.013145] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot [ 1.013148] pci 0000:04:0e.0: PME# disabled [ 1.013170] pci 0000:00:14.4: transparent bridge [ 1.013173] pci 0000:00:14.4: bridge io port: [0xb000-0xbfff] [ 1.013175] pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 1.013178] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff] [ 1.013243] pci 0000:05:00.0: reg 24 32bit mmio: [0xfdafe000-0xfdafffff] [ 1.013271] pci 0000:05:00.0: PME# supported from D3hot [ 1.013274] pci 0000:05:00.0: PME# disabled [ 1.013313] pci 0000:05:00.1: reg 10 io port: [0xaf00-0xaf07] [ 1.013320] pci 0000:05:00.1: reg 14 io port: [0xae00-0xae03] [ 1.013326] pci 0000:05:00.1: reg 18 io port: [0xad00-0xad07] [ 1.013332] pci 0000:05:00.1: reg 1c io port: [0xac00-0xac03] [ 1.013338] pci 0000:05:00.1: reg 20 io port: [0xab00-0xab0f] [ 1.013405] pci 0000:00:15.0: bridge io port: [0xa000-0xafff] [ 1.013407] pci 0000:00:15.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 1.013410] pci 0000:00:15.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 1.013443] pci 0000:06:00.0: reg 10 io port: [0x9e00-0x9eff] [ 1.013457] pci 0000:06:00.0: reg 18 64bit mmio pref: [0xfd7ff000-0xfd7fffff] [ 1.013467] pci 0000:06:00.0: reg 20 64bit mmio pref: [0xfd7f8000-0xfd7fbfff] [ 1.013472] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 1.013501] pci 0000:06:00.0: supports D1 D2 [ 1.013502] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.013505] pci 0000:06:00.0: PME# disabled [ 1.013548] pci 0000:00:15.1: bridge io port: [0x9000-0x9fff] [ 1.013550] pci 0000:00:15.1: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 1.013553] pci 0000:00:15.1: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] [ 1.013581] pci 0000:00:15.2: bridge io port: [0x8000-0x8fff] [ 1.013583] pci 0000:00:15.2: bridge 32bit mmio: [0xfd600000-0xfd6fffff] [ 1.013586] pci 0000:00:15.2: bridge 64bit mmio pref: [0xfd500000-0xfd5fffff] [ 1.013614] pci 0000:00:15.3: bridge io port: [0x7000-0x7fff] [ 1.013617] pci 0000:00:15.3: bridge 32bit mmio: [0xfd400000-0xfd4fffff] [ 1.013620] pci 0000:00:15.3: bridge 64bit mmio pref: [0xfd300000-0xfd3fffff] [ 1.013637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.013790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.013819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 1.013847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 1.013875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 1.013906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 1.013955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 1.013993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 1.014020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 1.025164] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 1.025221] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 1.025277] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 1.025335] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 1.025392] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 1.025449] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 1.025505] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 1.025561] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 1.025630] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.025633] vgaarb: loaded [ 1.025690] SCSI subsystem initialized [ 1.035811] libata version 3.00 loaded. [ 1.035811] usbcore: registered new interface driver usbfs [ 1.035811] usbcore: registered new interface driver hub [ 1.035811] usbcore: registered new device driver usb [ 1.035811] ACPI: WMI: Mapper loaded [ 1.035811] PCI: Using ACPI for IRQ routing [ 1.035811] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 1.035811] pci 0000:00:00.0: BAR 3: can't allocate resource [ 1.035811] NetLabel: Initializing [ 1.035811] NetLabel: domain hash size = 128 [ 1.035811] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.035811] NetLabel: unlabeled traffic allowed by default [ 1.035811] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.035811] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.035811] Switching to clocksource tsc [ 1.038159] AppArmor: AppArmor Filesystem Enabled [ 1.038159] pnp: PnP ACPI init [ 1.038159] ACPI: bus type pnp registered [ 1.038159] pnp 00:0a: mem resource (0xcf800-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.038159] pnp 00:0a: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.038159] pnp 00:0a: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.038159] pnp 00:0a: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.038159] pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.038159] pnp 00:0a: mem resource (0x100000-0xcfdeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.038159] pnp: PnP ACPI: found 11 devices [ 1.038159] ACPI: ACPI bus type pnp unregistered [ 1.038159] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.038159] system 00:01: ioport range 0x220-0x225 has been reserved [ 1.038159] system 00:01: ioport range 0x290-0x294 has been reserved [ 1.038159] system 00:02: ioport range 0x4100-0x411f has been reserved [ 1.038159] system 00:02: ioport range 0x228-0x22f has been reserved [ 1.038159] system 00:02: ioport range 0x40b-0x40b has been reserved [ 1.038159] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 1.038159] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 1.038159] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 1.038159] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 1.038159] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 1.038159] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 1.038159] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 1.038159] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 1.038159] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 1.038159] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 1.038159] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 1.038159] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 1.038159] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 1.038159] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 1.038159] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 1.038159] system 00:0a: iomem range 0xcfdf0000-0xcfdfffff could not be reserved [ 1.038159] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved [ 1.038159] system 00:0a: iomem range 0xcfe00000-0xcfefffff has been reserved [ 1.038159] system 00:0a: iomem range 0xcff00000-0xcfffffff could not be reserved [ 1.038159] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.038159] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.038159] system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved [ 1.038159] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 1.038159] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 1.038159] pci 0000:00:02.0: MEM window: 0xfde00000-0xfdefffff [ 1.038159] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 1.038159] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 1.038159] pci 0000:00:09.0: IO window: 0xd000-0xdfff [ 1.038159] pci 0000:00:09.0: MEM window: 0xfdb00000-0xfdbfffff [ 1.038159] pci 0000:00:09.0: PREFETCH window: 0x000000fd200000-0x000000fd2fffff [ 1.038159] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:03 [ 1.038159] pci 0000:00:0a.0: IO window: 0xc000-0xcfff [ 1.038159] pci 0000:00:0a.0: MEM window: 0xfd100000-0xfd1fffff [ 1.038159] pci 0000:00:0a.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 1.038159] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04 [ 1.038159] pci 0000:00:14.4: IO window: 0xb000-0xbfff [ 1.038159] pci 0000:00:14.4: MEM window: 0xfdd00000-0xfddfffff [ 1.038159] pci 0000:00:14.4: PREFETCH window: 0xfdc00000-0xfdcfffff [ 1.038159] pci 0000:00:15.0: PCI bridge, secondary bus 0000:05 [ 1.038159] pci 0000:00:15.0: IO window: 0xa000-0xafff [ 1.038159] pci 0000:00:15.0: MEM window: 0xfda00000-0xfdafffff [ 1.038159] pci 0000:00:15.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 1.038159] pci 0000:00:15.1: PCI bridge, secondary bus 0000:06 [ 1.038159] pci 0000:00:15.1: IO window: 0x9000-0x9fff [ 1.038159] pci 0000:00:15.1: MEM window: 0xfd800000-0xfd8fffff [ 1.038159] pci 0000:00:15.1: PREFETCH window: 0x000000fd700000-0x000000fd7fffff [ 1.038159] pci 0000:00:15.2: PCI bridge, secondary bus 0000:07 [ 1.038159] pci 0000:00:15.2: IO window: 0x8000-0x8fff [ 1.038159] pci 0000:00:15.2: MEM window: 0xfd600000-0xfd6fffff [ 1.038159] pci 0000:00:15.2: PREFETCH window: 0x000000fd500000-0x000000fd5fffff [ 1.038159] pci 0000:00:15.3: PCI bridge, secondary bus 0000:08 [ 1.038159] pci 0000:00:15.3: IO window: 0x7000-0x7fff [ 1.038159] pci 0000:00:15.3: MEM window: 0xfd400000-0xfd4fffff [ 1.038159] pci 0000:00:15.3: PREFETCH window: 0x000000fd300000-0x000000fd3fffff [ 1.038159] alloc irq_desc for 18 on node 0 [ 1.038159] alloc kstat_irqs on node 0 [ 1.038159] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.038159] pci 0000:00:02.0: setting latency timer to 64 [ 1.038159] alloc irq_desc for 17 on node 0 [ 1.038159] alloc kstat_irqs on node 0 [ 1.038159] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.038159] pci 0000:00:09.0: setting latency timer to 64 [ 1.038159] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.038159] pci 0000:00:0a.0: setting latency timer to 64 [ 1.038159] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.038159] pci 0000:00:15.0: setting latency timer to 64 [ 1.038159] pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.038159] pci 0000:00:15.1: setting latency timer to 64 [ 1.038159] pci 0000:00:15.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.038159] pci 0000:00:15.2: setting latency timer to 64 [ 1.038159] pci 0000:00:15.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.038159] pci 0000:00:15.3: setting latency timer to 64 [ 1.038159] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.038159] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.038159] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 1.038159] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 1.038159] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 1.038159] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 1.038159] pci_bus 0000:02: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 1.038159] pci_bus 0000:02: resource 2 pref mem [0xfd200000-0xfd2fffff] [ 1.038159] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 1.038159] pci_bus 0000:03: resource 1 mem: [0xfd100000-0xfd1fffff] [ 1.038159] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 1.038159] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] [ 1.038159] pci_bus 0000:04: resource 1 mem: [0xfdd00000-0xfddfffff] [ 1.038159] pci_bus 0000:04: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 1.038159] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 1.038159] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.038159] pci_bus 0000:05: resource 0 io: [0xa000-0xafff] [ 1.038159] pci_bus 0000:05: resource 1 mem: [0xfda00000-0xfdafffff] [ 1.038159] pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 1.038159] pci_bus 0000:06: resource 0 io: [0x9000-0x9fff] [ 1.038159] pci_bus 0000:06: resource 1 mem: [0xfd800000-0xfd8fffff] [ 1.038159] pci_bus 0000:06: resource 2 pref mem [0xfd700000-0xfd7fffff] [ 1.038159] pci_bus 0000:07: resource 0 io: [0x8000-0x8fff] [ 1.038159] pci_bus 0000:07: resource 1 mem: [0xfd600000-0xfd6fffff] [ 1.038159] pci_bus 0000:07: resource 2 pref mem [0xfd500000-0xfd5fffff] [ 1.038159] pci_bus 0000:08: resource 0 io: [0x7000-0x7fff] [ 1.038159] pci_bus 0000:08: resource 1 mem: [0xfd400000-0xfd4fffff] [ 1.038159] pci_bus 0000:08: resource 2 pref mem [0xfd300000-0xfd3fffff] [ 1.038159] NET: Registered protocol family 2 [ 1.038159] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.038159] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.039169] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.039374] TCP: Hash tables configured (established 524288 bind 65536) [ 1.039376] TCP reno registered [ 1.039440] NET: Registered protocol family 1 [ 1.105594] Freeing initrd memory: 8141k freed [ 1.130136] pci 0000:01:00.0: Boot video device [ 1.130318] PCI-DMA: Disabling AGP. [ 1.130385] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 1.130386] PCI-DMA: using GART IOMMU. [ 1.130388] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.131919] Scanning for low memory corruption every 60 seconds [ 1.131999] audit: initializing netlink socket (disabled) [ 1.132006] type=2000 audit(1284807406.131:1): initialized [ 1.137953] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.138916] VFS: Disk quotas dquot_6.5.2 [ 1.138948] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.139391] fuse init (API version 7.13) [ 1.139431] msgmni has been set to 7920 [ 1.139692] alg: No test for stdrng (krng) [ 1.139728] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.139730] io scheduler noop registered [ 1.139731] io scheduler anticipatory registered [ 1.139732] io scheduler deadline registered [ 1.139754] io scheduler cfq registered (default) [ 1.139875] alloc irq_desc for 24 on node 0 [ 1.139876] alloc kstat_irqs on node 0 [ 1.139883] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 1.139886] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.139967] alloc irq_desc for 25 on node 0 [ 1.139968] alloc kstat_irqs on node 0 [ 1.139971] pcieport 0000:00:09.0: irq 25 for MSI/MSI-X [ 1.139973] pcieport 0000:00:09.0: setting latency timer to 64 [ 1.140072] alloc irq_desc for 26 on node 0 [ 1.140072] alloc kstat_irqs on node 0 [ 1.140075] pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X [ 1.140078] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.140159] alloc irq_desc for 27 on node 0 [ 1.140160] alloc kstat_irqs on node 0 [ 1.140164] pcieport 0000:00:15.0: irq 27 for MSI/MSI-X [ 1.140168] pcieport 0000:00:15.0: setting latency timer to 64 [ 1.140264] alloc irq_desc for 28 on node 0 [ 1.140264] alloc kstat_irqs on node 0 [ 1.140269] pcieport 0000:00:15.1: irq 28 for MSI/MSI-X [ 1.140273] pcieport 0000:00:15.1: setting latency timer to 64 [ 1.140369] alloc irq_desc for 29 on node 0 [ 1.140370] alloc kstat_irqs on node 0 [ 1.140374] pcieport 0000:00:15.2: irq 29 for MSI/MSI-X [ 1.140378] pcieport 0000:00:15.2: setting latency timer to 64 [ 1.140476] alloc irq_desc for 30 on node 0 [ 1.140477] alloc kstat_irqs on node 0 [ 1.140481] pcieport 0000:00:15.3: irq 30 for MSI/MSI-X [ 1.140485] pcieport 0000:00:15.3: setting latency timer to 64 [ 1.140528] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.140593] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.140660] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.140660] ACPI: Power Button [PWRB] [ 1.140677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.140678] ACPI: Power Button [PWRF] [ 1.140879] processor LNXCPU:00: registered as cooling_device0 [ 1.140913] processor LNXCPU:01: registered as cooling_device1 [ 1.140946] processor LNXCPU:02: registered as cooling_device2 [ 1.140986] processor LNXCPU:03: registered as cooling_device3 [ 1.141019] processor LNXCPU:04: registered as cooling_device4 [ 1.141053] processor LNXCPU:05: registered as cooling_device5 [ 1.143161] Linux agpgart interface v0.103 [ 1.143161] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.143161] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.143255] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.143716] brd: module loaded [ 1.143927] loop: module loaded [ 1.143964] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.144716] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.144770] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 1.144773] alloc irq_desc for 19 on node 0 [ 1.144774] alloc kstat_irqs on node 0 [ 1.144778] pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.144790] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 1.144795] pata_acpi 0000:03:00.1: PCI INT B disabled [ 1.144828] pata_acpi 0000:05:00.1: enabling device (0000 -> 0001) [ 1.144831] pata_acpi 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.144844] pata_acpi 0000:05:00.1: setting latency timer to 64 [ 1.144851] pata_acpi 0000:05:00.1: PCI INT B disabled [ 1.145041] Fixed MDIO Bus: probed [ 1.145059] PPP generic driver version 2.4.2 [ 1.145076] tun: Universal TUN/TAP device driver, 1.6 [ 1.145077] tun: (C) 1999-2004 Max Krasnyansky [ 1.145111] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.145184] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.145227] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.145245] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.145265] ehci_hcd 0000:00:12.2: debug port 1 [ 1.145282] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000 [ 1.170076] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.170130] usb usb1: configuration #1 chosen from 1 choice [ 1.170145] hub 1-0:1.0: USB hub found [ 1.170150] hub 1-0:1.0: 5 ports detected [ 1.170254] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.170262] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.170277] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.170293] ehci_hcd 0000:00:13.2: debug port 1 [ 1.170301] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000 [ 1.190073] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.190122] usb usb2: configuration #1 chosen from 1 choice [ 1.190136] hub 2-0:1.0: USB hub found [ 1.190140] hub 2-0:1.0: 5 ports detected [ 1.190225] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.190233] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 1.190255] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.190272] ehci_hcd 0000:00:16.2: debug port 1 [ 1.190280] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000 [ 1.210082] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.210130] usb usb3: configuration #1 chosen from 1 choice [ 1.210143] hub 3-0:1.0: USB hub found [ 1.210146] hub 3-0:1.0: 4 ports detected [ 1.210187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.210249] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.210257] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.210272] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.210290] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000 [ 1.273520] usb usb4: configuration #1 chosen from 1 choice [ 1.273532] hub 4-0:1.0: USB hub found [ 1.273537] hub 4-0:1.0: 5 ports detected [ 1.274238] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.274246] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.274262] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.274273] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000 [ 1.333511] usb usb5: configuration #1 chosen from 1 choice [ 1.333523] hub 5-0:1.0: USB hub found [ 1.333528] hub 5-0:1.0: 5 ports detected [ 1.334227] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.334235] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.334252] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.334262] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000 [ 1.393510] usb usb6: configuration #1 chosen from 1 choice [ 1.393526] hub 6-0:1.0: USB hub found [ 1.393530] hub 6-0:1.0: 2 ports detected [ 1.394230] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.394238] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 1.394255] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.394265] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000 [ 1.453510] usb usb7: configuration #1 chosen from 1 choice [ 1.453522] hub 7-0:1.0: USB hub found [ 1.453527] hub 7-0:1.0: 4 ports detected [ 1.453557] uhci_hcd: USB Universal Host Controller Interface driver [ 1.453587] PNP: No PS/2 controller found. Probing ports directly. [ 1.486155] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.486156] If AUX port is really absent please use the 'i8042.noaux' option. [ 1.600077] usb 3-3: new high speed USB device using ehci_hcd and address 2 [ 1.730147] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.730204] mice: PS/2 mouse device common for all mice [ 1.730254] rtc_cmos 00:04: RTC can wake from S4 [ 1.730271] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.730289] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.730348] device-mapper: uevent: version 1.0.3 [ 1.730466] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.730610] device-mapper: multipath: version 1.1.0 loaded [ 1.730611] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.730919] cpuidle: using governor ladder [ 1.731040] cpuidle: using governor menu [ 1.731240] TCP cubic registered [ 1.731297] NET: Registered protocol family 10 [ 1.731531] lo: Disabled Privacy Extensions [ 1.731669] NET: Registered protocol family 17 [ 1.731736] powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor processors (6 cpu cores) (version 2.20.00) [ 1.731757] powernow-k8: 0 : pstate 0 (2800 MHz) [ 1.731758] powernow-k8: 1 : pstate 1 (2200 MHz) [ 1.731760] powernow-k8: 2 : pstate 2 (1500 MHz) [ 1.731761] powernow-k8: 3 : pstate 3 (800 MHz) [ 1.732385] PM: Resume from disk failed. [ 1.732391] registered taskstats version 1 [ 1.732743] Magic number: 10:321:932 [ 1.732822] rtc_cmos 00:04: setting system clock to 2010-09-18 10:56:47 UTC (1284807407) [ 1.732824] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.732825] EDD information not available. [ 1.732854] Freeing unused kernel memory: 880k freed [ 1.732989] Write protecting the kernel read-only data: 7696k [ 1.744812] udev: starting version 151 [ 1.753721] usb 3-3: configuration #1 chosen from 1 choice [ 1.765704] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.765704] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 1.766182] scsi0 : pata_atiixp [ 1.766182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.766182] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.766182] r8169 0000:06:00.0: setting latency timer to 64 [ 1.766182] alloc irq_desc for 31 on node 0 [ 1.766182] alloc kstat_irqs on node 0 [ 1.766182] r8169 0000:06:00.0: irq 31 for MSI/MSI-X [ 1.766415] eth0: RTL8168d/8111d at 0xffffc9000067e000, 1c:6f:65:40:ac:4d, XID 083000c0 IRQ 31 [ 1.776249] Initializing USB Mass Storage driver... [ 1.776811] scsi3 : SCSI emulation for USB Mass Storage devices [ 1.776874] usb-storage: device found at 2 [ 1.776875] usb-storage: waiting for device to settle before scanning [ 1.776879] usbcore: registered new interface driver usb-storage [ 1.776881] USB Mass Storage support registered. [ 1.805857] scsi2 : pata_atiixp [ 1.806016] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.806016] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.806018] scsi1 : pata_jmicron [ 1.806763] alloc irq_desc for 22 on node 0 [ 1.806763] alloc kstat_irqs on node 0 [ 1.806763] ohci1394 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.806879] scsi4 : pata_jmicron [ 1.806891] ata3: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 19 [ 1.806891] ata4: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 19 [ 1.806927] ahci 0000:00:11.0: version 3.0 [ 1.806935] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.806949] alloc irq_desc for 32 on node 0 [ 1.806949] alloc kstat_irqs on node 0 [ 1.806966] ahci 0000:00:11.0: irq 32 for MSI/MSI-X [ 1.806966] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.806966] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.807058] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.807058] pata_jmicron 0000:05:00.1: setting latency timer to 64 [ 1.807199] scsi5 : pata_jmicron [ 1.807262] scsi6 : pata_jmicron [ 1.807312] ata5: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17 [ 1.807312] ata6: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17 [ 1.807449] scsi7 : ahci [ 1.807497] scsi8 : ahci [ 1.807545] scsi9 : ahci [ 1.807591] scsi10 : ahci [ 1.807660] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 32 [ 1.807662] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 32 [ 1.807664] ata9: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 32 [ 1.807666] ata10: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 32 [ 1.807791] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.820093] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.820095] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.820099] ahci 0000:03:00.0: setting latency timer to 64 [ 1.820236] scsi11 : ahci [ 1.820309] scsi12 : ahci [ 1.820335] ata11: SATA max UDMA/133 abar m8192@0xfd1fe000 port 0xfd1fe100 irq 18 [ 1.820338] ata12: SATA max UDMA/133 abar m8192@0xfd1fe000 port 0xfd1fe180 irq 18 [ 1.820452] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.840098] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.840101] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.840105] ahci 0000:05:00.0: setting latency timer to 64 [ 1.840245] scsi13 : ahci [ 1.840315] scsi14 : ahci [ 1.840342] ata13: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 17 [ 1.840345] ata14: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 17 [ 1.860107] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.120079] usb 4-2: new full speed USB device using ohci_hcd and address 2 [ 2.150067] ata9: SATA link down (SStatus 0 SControl 300) [ 2.170101] ata12: SATA link down (SStatus 0 SControl 300) [ 2.170112] ata11: SATA link down (SStatus 0 SControl 300) [ 2.190122] ata13: SATA link down (SStatus 0 SControl 300) [ 2.190125] ata14: SATA link down (SStatus 0 SControl 300) [ 2.317217] usb 4-2: configuration #1 chosen from 1 choice [ 2.327001] usbcore: registered new interface driver hiddev [ 2.330085] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.330234] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input3 [ 2.330313] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input0 [ 2.331130] ata7.00: ATA-8: WDC WD3200AAKS-00UU3A0, 01.03B01, max UDMA/133 [ 2.331131] ata7.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.332332] ata7.00: configured for UDMA/133 [ 2.333182] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.333186] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.337300] ata10.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100, ATAPI AN [ 2.338188] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/input/input4 [ 2.338246] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input1 [ 2.338267] usbcore: registered new interface driver usbhid [ 2.338267] usbhid: v2.6:USB HID core driver [ 2.339602] ata8.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 2.339603] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.341659] ata10.00: configured for UDMA/100 [ 2.346140] ata8.00: configured for UDMA/133 [ 2.481731] scsi 7:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5 [ 2.481853] sd 7:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.481849] sd 7:0:0:0: Attached scsi generic sg0 type 0 [ 2.481877] sd 7:0:0:0: [sda] Write Protect is off [ 2.481879] sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.481891] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.481945] scsi 8:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 2.482000] sda: [ 2.482041] sd 8:0:0:0: Attached scsi generic sg1 type 0 [ 2.482050] sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.482107] sd 8:0:0:0: [sdb] Write Protect is off [ 2.482107] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.482125] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.482194] sdb: [ 2.485470] scsi 10:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5 [ 2.487462] sdb1 [ 2.487608] sd 8:0:0:0: [sdb] Attached SCSI disk [ 2.490665] sda1 sda2 sda3 sda4 [ 2.512741] sd 7:0:0:0: [sda] Attached SCSI disk [ 2.660011] usb 7-4: new low speed USB device using ohci_hcd and address 2 [ 2.878178] usb 7-4: configuration #1 chosen from 1 choice [ 2.878868] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.887733] input: HID 046a:0023 as /devices/pci0000:00/0000:00:16.0/usb7/7-4/7-4:1.0/input/input5 [ 2.887787] cherry 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:16.0-4/input0 [ 2.896230] input: HID 046a:0023 as /devices/pci0000:00/0000:00:16.0/usb7/7-4/7-4:1.1/input/input6 [ 2.896273] cherry 0003:046A:0023.0004: input,hidraw3: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:16.0-4/input1 [ 3.180211] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010006d001c6f65] [ 6.770394] usb-storage: device scan complete [ 7.294035] scsi 3:0:0:0: Direct-Access ST330083 1A 4.40 PQ: 0 ANSI: 0 [ 7.294341] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 7.295007] sd 3:0:0:0: [sdc] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 7.295885] sd 3:0:0:0: [sdc] Write Protect is off [ 7.295887] sd 3:0:0:0: [sdc] Mode Sense: 10 00 00 00 [ 7.295889] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 7.297384] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 7.297387] sdc: sdc1 [ 7.323131] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 7.323133] sd 3:0:0:0: [sdc] Attached SCSI disk [ 8.735695] udev: starting version 151 [ 8.742393] lp: driver loaded but no devices found [ 8.744445] vga16fb: initializing [ 8.744447] vga16fb: mapped to 0xffff8800000a0000 [ 8.744491] fb0: VGA16 VGA frame buffer device [ 8.770674] parport_pc 00:08: reported by Plug and Play ACPI [ 8.770674] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.774270] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.774270] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 8.774270] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 8.774435] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 8.774435] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfdbfe000 [ 8.774435] usb usb8: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor [ 8.774435] usb usb8: configuration #1 chosen from 1 choice [ 8.774435] xHCI xhci_add_endpoint called for root hub [ 8.774435] xHCI xhci_check_bandwidth called for root hub [ 8.774435] hub 8-0:1.0: USB hub found [ 8.774435] hub 8-0:1.0: 4 ports detected [ 8.778437] EDAC MC: Ver: 2.1.0 Sep 16 2010 [ 8.782552] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0x000b00-0x000b0f] [ 8.782552] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.788521] EDAC amd64_edac: Ver: 3.2.0 Sep 16 2010 [ 8.794300] Adding 3905528k swap on /dev/sda5. Priority:-1 extents:1 across:3905528k [ 8.801146] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 8.801153] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 8.801154] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 8.801155] (Note that use of the override may cause unknown side effects.) [ 8.801157] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 8.815902] ppdev: user-space parallel port driver [ 8.834039] type=1505 audit(1284807414.599:2): operation="profile_load" pid=765 name="/sbin/dhclient3" [ 8.834204] type=1505 audit(1284807414.599:3): operation="profile_load" pid=765 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 8.834297] type=1505 audit(1284807414.599:4): operation="profile_load" pid=765 name="/usr/lib/connman/scripts/dhclient-script" [ 8.847342] alloc irq_desc for 16 on node 0 [ 8.847342] alloc kstat_irqs on node 0 [ 8.847342] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.853267] lp0: using parport0 (interrupt-driven). [ 8.927102] Console: switching to colour frame buffer device 80x30 [ 9.054493] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.054529] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 9.550942] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 9.748670] type=1505 audit(1284807415.508:5): operation="profile_load" pid=1021 name="/usr/share/gdm/guest-session/Xsession" [ 9.749650] type=1505 audit(1284807415.508:6): operation="profile_replace" pid=1022 name="/sbin/dhclient3" [ 9.749822] type=1505 audit(1284807415.508:7): operation="profile_replace" pid=1022 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.749916] type=1505 audit(1284807415.508:8): operation="profile_replace" pid=1022 name="/usr/lib/connman/scripts/dhclient-script" [ 9.751997] type=1505 audit(1284807415.518:9): operation="profile_load" pid=1025 name="/usr/bin/evince" [ 9.754043] type=1505 audit(1284807415.518:10): operation="profile_load" pid=1025 name="/usr/bin/evince-previewer" [ 9.755403] type=1505 audit(1284807415.518:11): operation="profile_load" pid=1025 name="/usr/bin/evince-thumbnailer" [ 9.812357] r8169: eth0: link up [ 9.812328] r8169: eth0: link up [ 10.017856] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.078082] CPU0 attaching NULL sched-domain. [ 10.078086] CPU1 attaching NULL sched-domain. [ 10.078087] CPU2 attaching NULL sched-domain. [ 10.078088] CPU3 attaching NULL sched-domain. [ 10.078089] CPU4 attaching NULL sched-domain. [ 10.078090] CPU5 attaching NULL sched-domain. [ 10.150707] CPU0 attaching sched-domain: [ 10.150709] domain 0: span 0-5 level MC [ 10.150711] groups: 0 1 2 3 4 5 [ 10.150715] CPU1 attaching sched-domain: [ 10.150715] domain 0: span 0-5 level MC [ 10.150717] groups: 1 2 3 4 5 0 [ 10.150719] CPU2 attaching sched-domain: [ 10.150720] domain 0: span 0-5 level MC [ 10.150721] groups: 2 3 4 5 0 1 [ 10.150723] CPU3 attaching sched-domain: [ 10.150724] domain 0: span 0-5 level MC [ 10.150725] groups: 3 4 5 0 1 2 [ 10.150728] CPU4 attaching sched-domain: [ 10.150728] domain 0: span 0-5 level MC [ 10.150729] groups: 4 5 0 1 2 3 [ 10.150732] CPU5 attaching sched-domain: [ 10.150732] domain 0: span 0-5 level MC [ 10.150733] groups: 5 0 1 2 3 4 [ 11.726915] CPU0 attaching NULL sched-domain. [ 11.726919] CPU1 attaching NULL sched-domain. [ 11.726921] CPU2 attaching NULL sched-domain. [ 11.726925] CPU3 attaching NULL sched-domain. [ 11.726927] CPU4 attaching NULL sched-domain. [ 11.726928] CPU5 attaching NULL sched-domain. [ 11.791962] CPU0 attaching sched-domain: [ 11.791964] domain 0: span 0-5 level MC [ 11.791966] groups: 0 1 2 3 4 5 [ 11.791970] CPU1 attaching sched-domain: [ 11.791971] domain 0: span 0-5 level MC [ 11.791972] groups: 1 2 3 4 5 0 [ 11.791974] CPU2 attaching sched-domain: [ 11.791975] domain 0: span 0-5 level MC [ 11.791976] groups: 2 3 4 5 0 1 [ 11.791979] CPU3 attaching sched-domain: [ 11.791980] domain 0: span 0-5 level MC [ 11.791980] groups: 3 4 5 0 1 2 [ 11.791983] CPU4 attaching sched-domain: [ 11.791984] domain 0: span 0-5 level MC [ 11.791984] groups: 4 5 0 1 2 3 [ 11.791987] CPU5 attaching sched-domain: [ 11.791988] domain 0: span 0-5 level MC [ 11.791989] groups: 5 0 1 2 3 4 [ 12.034243] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 19.900115] eth0: no IPv6 routers present [ 28.004554] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended [ 28.012067] EXT4-fs (sdc1): mounted filesystem with ordered data mode