[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] modified: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 7f711000 - 7ffff970 [ 0.000000] Allocated new RAMDISK: 008de000 - 011cc970 [ 0.000000] Move RAMDISK from 000000007f711000 - 000000007ffff96f to 008de000 - 011cc96f [ 0.000000] ACPI: RSDP 000f7500 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT bfee3100 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP bfee7e80 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT bfee32c0 04B61 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS bfee0000 00040 [ 0.000000] ACPI: SLIC bfee80c0 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT bfee8280 00178 (v01 HPQOEM SLIC-CPC 00000001 LTP 00000001) [ 0.000000] ACPI: HPET bfee8440 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG bfee84c0 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC bfee7fc0 00098 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2182MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd5b4] BRK ==> [00008da000 - 00008dd5b4] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 00011cc970] NEW RAMDISK ==> [00008de000 - 00011cc970] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f53a0] f53a0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfee0 [ 0.000000] On node 0 totalpages: 786031 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c11ce200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4366 pages used for memmap [ 0.000000] HighMem zone: 554452 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u1048576 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779889 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15722560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfee0) [ 0.000000] Memory: 3084692k/3144576k available (4673k kernel code, 58244k reserved, 2122k data, 656k init, 2235272k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2712.428 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.85 BogoMIPS (lpj=10849712) [ 0.004020] Security Framework initialized [ 0.004040] AppArmor: AppArmor initialized [ 0.004046] Mount-cache hash table entries: 512 [ 0.004166] Initializing cgroup subsys ns [ 0.004170] Initializing cgroup subsys cpuacct [ 0.004173] Initializing cgroup subsys memory [ 0.004179] Initializing cgroup subsys devices [ 0.004182] Initializing cgroup subsys freezer [ 0.004184] Initializing cgroup subsys net_cls [ 0.004200] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004202] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004206] mce: CPU supports 5 MCE banks [ 0.004214] using C1E aware idle routine [ 0.004222] Performance Events: AMD PMU driver. [ 0.004227] ... version: 0 [ 0.004228] ... bit width: 48 [ 0.004230] ... generic registers: 4 [ 0.004231] ... value mask: 0000ffffffffffff [ 0.004233] ... max period: 00007fffffffffff [ 0.004234] ... fixed-purpose events: 0 [ 0.004236] ... event mask: 000000000000000f [ 0.004239] Checking 'hlt' instruction... OK. [ 0.020561] SMP alternatives: switching to UP code [ 0.025145] ACPI: Core revision 20090903 [ 0.032024] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.032032] ftrace: allocating 21771 entries in 43 pages [ 0.036088] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036539] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079766] CPU0: AMD Athlon(tm) Processor LE-1640 stepping 02 [ 0.080001] Brought up 1 CPUs [ 0.080001] Total of 1 processors activated (5424.85 BogoMIPS). [ 0.080001] CPU0 attaching NULL sched-domain. [ 0.080001] devtmpfs: initialized [ 0.080001] regulator: core version 0.5 [ 0.080001] Time: 15:00:00 Date: 08/15/10 [ 0.080001] NET: Registered protocol family 16 [ 0.080001] EISA bus registered [ 0.080001] ACPI: bus type pci registered [ 0.080001] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.080001] PCI: MCFG area at f0000000 reserved in E820 [ 0.080001] PCI: Using MMCONFIG for extended config space [ 0.080001] PCI: Using configuration type 1 for base access [ 0.080001] bio: create slab at 0 [ 0.080001] ACPI: EC: Look up EC in DSDT [ 0.083631] ACPI: Interpreter enabled [ 0.083640] ACPI: (supports S0 S1 S3 S4 S5) [ 0.083663] ACPI: Using IOAPIC for interrupt routing [ 0.089590] ACPI: No dock devices found. [ 0.089686] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.089878] pci 0000:00:01.1: reg 10 io port: [0xff00-0xff3f] [ 0.089888] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.089892] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.089909] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.089915] pci 0000:00:01.1: PME# disabled [ 0.089956] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.089976] pci 0000:00:02.0: supports D1 D2 [ 0.089978] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.089981] pci 0000:00:02.0: PME# disabled [ 0.090000] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.090023] pci 0000:00:02.1: supports D1 D2 [ 0.090025] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.090029] pci 0000:00:02.1: PME# disabled [ 0.090082] pci 0000:00:05.0: reg 10 32bit mmio: [0xfe028000-0xfe02bfff] [ 0.090105] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.090108] pci 0000:00:05.0: PME# disabled [ 0.090133] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7] [ 0.090137] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3] [ 0.090140] pci 0000:00:08.0: reg 18 io port: [0x970-0x977] [ 0.090143] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73] [ 0.090147] pci 0000:00:08.0: reg 20 io port: [0xf800-0xf80f] [ 0.090151] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.090176] pci 0000:00:08.1: reg 10 io port: [0x9e0-0x9e7] [ 0.090180] pci 0000:00:08.1: reg 14 io port: [0xbe0-0xbe3] [ 0.090183] pci 0000:00:08.1: reg 18 io port: [0x960-0x967] [ 0.090187] pci 0000:00:08.1: reg 1c io port: [0xb60-0xb63] [ 0.090190] pci 0000:00:08.1: reg 20 io port: [0xf300-0xf30f] [ 0.090194] pci 0000:00:08.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.090236] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.090238] pci 0000:00:09.0: PME# disabled [ 0.090267] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.090270] pci 0000:00:0b.0: PME# disabled [ 0.090297] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.090299] pci 0000:00:0c.0: PME# disabled [ 0.090393] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfddf0000-0xfddfffff] [ 0.090443] pci 0000:00:04.0: transparent bridge [ 0.090446] pci 0000:00:04.0: bridge io port: [0xe000-0xefff] [ 0.090449] pci 0000:00:04.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.090453] pci 0000:00:04.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff] [ 0.090473] pci 0000:02:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.090480] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdcc0000-0xfdcdffff] [ 0.090485] pci 0000:02:00.0: reg 20 io port: [0xdc00-0xdcff] [ 0.090491] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfdca0000-0xfdcbffff] [ 0.090504] pci 0000:02:00.0: supports D1 D2 [ 0.090528] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdcfc000-0xfdcfffff] [ 0.090551] pci 0000:02:00.1: supports D1 D2 [ 0.090587] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff] [ 0.090590] pci 0000:00:09.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.090593] pci 0000:00:09.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.090624] pci 0000:00:0b.0: bridge io port: [0xc000-0xcfff] [ 0.090627] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.090630] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] [ 0.090660] pci 0000:04:00.0: reg 10 64bit mmio: [0xfd9ff000-0xfd9fffff] [ 0.090695] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.090698] pci 0000:04:00.0: PME# disabled [ 0.090735] pci 0000:00:0c.0: bridge io port: [0xb000-0xbfff] [ 0.090737] pci 0000:00:0c.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff] [ 0.090741] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff] [ 0.090748] pci_bus 0000:00: on NUMA node 0 [ 0.090752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.090909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.119335] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.119463] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.119590] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15) [ 0.119716] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.119843] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15) [ 0.119968] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.120103] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.120229] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 *11 14 15) [ 0.120355] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.120481] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.120610] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.120735] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.120862] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 0.120988] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.121115] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15) [ 0.121249] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.121374] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.121501] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.121633] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.121801] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.121959] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.122117] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.122274] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.122431] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.122588] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.122745] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.122902] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0 [ 0.123059] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0, disabled. [ 0.123216] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0 [ 0.123376] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0, disabled. [ 0.123534] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled. [ 0.123691] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0 [ 0.123848] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0 [ 0.124014] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0 [ 0.124172] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled. [ 0.124330] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled. [ 0.124487] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0 [ 0.124645] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0 [ 0.124740] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.124742] vgaarb: loaded [ 0.124836] SCSI subsystem initialized [ 0.124908] libata version 3.00 loaded. [ 0.124961] usbcore: registered new interface driver usbfs [ 0.124971] usbcore: registered new interface driver hub [ 0.124990] usbcore: registered new device driver usb [ 0.125086] ACPI: WMI: Mapper loaded [ 0.125088] PCI: Using ACPI for IRQ routing [ 0.125205] NetLabel: Initializing [ 0.125206] NetLabel: domain hash size = 128 [ 0.125208] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.125221] NetLabel: unlabeled traffic allowed by default [ 0.125248] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.125252] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.128012] Switching to clocksource hpet [ 0.129430] AppArmor: AppArmor Filesystem Enabled [ 0.129448] pnp: PnP ACPI init [ 0.129467] ACPI: bus type pnp registered [ 0.131566] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20090903/dsopcode-596) [ 0.131572] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.MEM_._CRS] (Node f7018f60), AE_AML_BUFFER_LIMIT [ 0.131595] ACPI Error (uteval-0250): Method execution failed [\_SB_.MEM_._CRS] (Node f7018f60), AE_AML_BUFFER_LIMIT [ 0.131601] pnp 00:09: can't evaluate _CRS: 12298 [ 0.131641] pnp: PnP ACPI: found 10 devices [ 0.131643] ACPI: ACPI bus type pnp unregistered [ 0.131645] PnPBIOS: Disabled by ACPI PNP [ 0.131655] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.131658] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.131660] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.131662] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.131664] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.131667] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.131671] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.131673] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.131676] system 00:02: ioport range 0x294-0x297 has been reserved [ 0.131681] system 00:08: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.166303] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.166305] pci 0000:00:04.0: IO window: 0xe000-0xefff [ 0.166309] pci 0000:00:04.0: MEM window: 0xfdd00000-0xfddfffff [ 0.166311] pci 0000:00:04.0: PREFETCH window: 0xfde00000-0xfdefffff [ 0.166315] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.166318] pci 0000:00:09.0: IO window: 0xd000-0xdfff [ 0.166320] pci 0000:00:09.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.166323] pci 0000:00:09.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.166326] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.166328] pci 0000:00:0b.0: IO window: 0xc000-0xcfff [ 0.166330] pci 0000:00:0b.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.166333] pci 0000:00:0b.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.166336] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.166338] pci 0000:00:0c.0: IO window: 0xb000-0xbfff [ 0.166340] pci 0000:00:0c.0: MEM window: 0xfd900000-0xfd9fffff [ 0.166343] pci 0000:00:0c.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff [ 0.166351] pci 0000:00:04.0: setting latency timer to 64 [ 0.166355] pci 0000:00:09.0: setting latency timer to 64 [ 0.166358] pci 0000:00:0b.0: setting latency timer to 64 [ 0.166362] pci 0000:00:0c.0: setting latency timer to 64 [ 0.166365] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.166367] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.166369] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.166371] pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.166374] pci_bus 0000:01: resource 2 pref mem [0xfde00000-0xfdefffff] [ 0.166376] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.166378] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.166380] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.166382] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.166384] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.166386] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.166388] pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.166390] pci_bus 0000:03: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.166392] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] [ 0.166394] pci_bus 0000:04: resource 1 mem: [0xfd900000-0xfd9fffff] [ 0.166397] pci_bus 0000:04: resource 2 pref mem [0xfd800000-0xfd8fffff] [ 0.166427] NET: Registered protocol family 2 [ 0.166505] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.166779] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.167501] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.167886] TCP: Hash tables configured (established 131072 bind 65536) [ 0.167888] TCP reno registered [ 0.167982] NET: Registered protocol family 1 [ 0.168125] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.168169] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.168215] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.168260] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.168309] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.168361] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.168417] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.168425] pci 0000:02:00.0: Boot video device [ 0.168597] cpufreq-nforce2: No nForce2 chipset. [ 0.168618] Scanning for low memory corruption every 60 seconds [ 0.168699] audit: initializing netlink socket (disabled) [ 0.168708] type=2000 audit(1281884400.168:1): initialized [ 0.176197] Trying to unpack rootfs image as initramfs... [ 1.828759] highmem bounce pool size: 64 pages [ 1.828763] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.829802] VFS: Disk quotas dquot_6.5.2 [ 1.829845] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.830255] fuse init (API version 7.13) [ 1.830315] msgmni has been set to 1661 [ 1.830468] alg: No test for stdrng (krng) [ 1.830510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.830513] io scheduler noop registered [ 1.830514] io scheduler anticipatory registered [ 1.830516] io scheduler deadline registered [ 1.830549] io scheduler cfq registered (default) [ 1.830649] alloc irq_desc for 24 on node -1 [ 1.830651] alloc kstat_irqs on node -1 [ 1.830659] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X [ 1.830664] pcieport 0000:00:09.0: setting latency timer to 64 [ 1.830716] alloc irq_desc for 25 on node -1 [ 1.830718] alloc kstat_irqs on node -1 [ 1.830722] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X [ 1.830725] pcieport 0000:00:0b.0: setting latency timer to 64 [ 1.830777] alloc irq_desc for 26 on node -1 [ 1.830779] alloc kstat_irqs on node -1 [ 1.830783] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X [ 1.830786] pcieport 0000:00:0c.0: setting latency timer to 64 [ 1.830825] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.830843] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.830919] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.830923] ACPI: Power Button [PWRB] [ 1.830969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.830972] ACPI: Power Button [PWRF] [ 1.831011] fan PNP0C0B:00: registered as cooling_device0 [ 1.831015] ACPI: Fan [FAN] (on) [ 1.831272] processor LNXCPU:00: registered as cooling_device1 [ 1.833884] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012) [ 1.833891] ACPI: Expecting a [Reference] package element, found type 0 [ 1.833893] ACPI: Invalid passive threshold [ 1.834172] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.834177] ACPI: Thermal Zone [THRM] (40 C) [ 1.834281] isapnp: Scanning for PnP cards... [ 1.840797] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.841684] brd: module loaded [ 1.842010] loop: module loaded [ 1.842077] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.842449] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 1.842453] alloc irq_desc for 20 on node -1 [ 1.842455] alloc kstat_irqs on node -1 [ 1.842464] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 1.842498] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 1.842508] pata_acpi 0000:00:08.0: PCI INT A disabled [ 1.842734] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 [ 1.842736] alloc irq_desc for 21 on node -1 [ 1.842737] alloc kstat_irqs on node -1 [ 1.842743] pata_acpi 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21 [ 1.842755] pata_acpi 0000:00:08.1: setting latency timer to 64 [ 1.842760] pata_acpi 0000:00:08.1: PCI INT B disabled [ 1.842980] Fixed MDIO Bus: probed [ 1.843006] PPP generic driver version 2.4.2 [ 1.843036] tun: Universal TUN/TAP device driver, 1.6 [ 1.843038] tun: (C) 1999-2004 Max Krasnyansky [ 1.843096] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.843343] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 1.843345] alloc irq_desc for 23 on node -1 [ 1.843347] alloc kstat_irqs on node -1 [ 1.843353] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 [ 1.843366] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.843369] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.843394] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.843411] ehci_hcd 0000:00:02.1: debug port 1 [ 1.843417] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.843436] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 [ 1.886846] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.886928] usb usb1: configuration #1 chosen from 1 choice [ 1.886951] hub 1-0:1.0: USB hub found [ 1.886959] hub 1-0:1.0: 10 ports detected [ 1.887010] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.887286] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 1.887288] alloc irq_desc for 22 on node -1 [ 1.887289] alloc kstat_irqs on node -1 [ 1.887296] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 [ 1.887302] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.887305] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.887331] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 1.887351] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 [ 1.976181] usb usb2: configuration #1 chosen from 1 choice [ 1.976198] hub 2-0:1.0: USB hub found [ 1.976206] hub 2-0:1.0: 10 ports detected [ 1.976248] uhci_hcd: USB Universal Host Controller Interface driver [ 1.976311] PNP: No PS/2 controller found. Probing ports directly. [ 2.021902] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.021908] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.021964] mice: PS/2 mouse device common for all mice [ 2.022056] rtc_cmos 00:05: RTC can wake from S4 [ 2.022084] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.022119] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 2.022201] device-mapper: uevent: version 1.0.3 [ 2.022338] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.022379] device-mapper: multipath: version 1.1.0 loaded [ 2.022383] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.022469] EISA: Probing bus 0 at eisa.0 [ 2.022473] Cannot allocate resource for EISA slot 1 [ 2.022490] EISA: Detected 0 cards. [ 2.022528] cpuidle: using governor ladder [ 2.022530] cpuidle: using governor menu [ 2.022850] TCP cubic registered [ 2.022964] NET: Registered protocol family 10 [ 2.023308] lo: Disabled Privacy Extensions [ 2.023529] NET: Registered protocol family 17 [ 2.023552] powernow-k8: Found 1 AMD Athlon(tm) Processor LE-1640 processors (1 cpu cores) (version 2.20.00) [ 2.023602] powernow-k8: 0 : fid 0x13 (2700 MHz), vid 0x8 [ 2.023604] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0x9 [ 2.023606] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xb [ 2.023608] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xd [ 2.023610] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0xf [ 2.023612] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x11 [ 2.023613] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 [ 2.023644] Using IPI No-Shortcut mode [ 2.023705] PM: Resume from disk failed. [ 2.023716] registered taskstats version 1 [ 2.023954] Magic number: 6:690:32 [ 2.024082] rtc_cmos 00:05: setting system clock to 2010-08-15 15:00:02 UTC (1281884402) [ 2.024084] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.024086] EDD information not available. [ 2.197817] isapnp: No Plug & Play device found [ 2.245550] Freeing initrd memory: 9146k freed [ 2.252479] Freeing unused kernel memory: 656k freed [ 2.252979] Write protecting the kernel text: 4676k [ 2.253002] Write protecting the kernel read-only data: 1840k [ 2.272139] udev: starting version 151 [ 2.366832] vga16fb: initializing [ 2.366836] vga16fb: mapped to 0xc00a0000 [ 2.366881] fb0: VGA16 VGA frame buffer device [ 2.376159] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 2.434047] sata_nv 0000:00:08.0: version 3.5 [ 2.434061] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 2.434100] sata_nv 0000:00:08.0: setting latency timer to 64 [ 2.436404] scsi0 : sata_nv [ 2.491890] scsi1 : sata_nv [ 2.492135] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 20 [ 2.492138] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 20 [ 2.492160] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21 [ 2.492200] sata_nv 0000:00:08.1: setting latency timer to 64 [ 2.493382] scsi2 : sata_nv [ 2.493638] scsi3 : sata_nv [ 2.493784] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 21 [ 2.493786] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 21 [ 2.546620] Console: switching to colour frame buffer device 80x30 [ 2.563906] usb 1-6: configuration #1 chosen from 1 choice [ 2.570419] Initializing USB Mass Storage driver... [ 2.570498] scsi4 : SCSI emulation for USB Mass Storage devices [ 2.570594] usbcore: registered new interface driver usb-storage [ 2.570596] USB Mass Storage support registered. [ 2.570656] usb-storage: device found at 4 [ 2.570658] usb-storage: waiting for device to settle before scanning [ 2.814218] ata3: SATA link down (SStatus 0 SControl 300) [ 2.868015] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 2.968032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.000114] ata1.00: ATA-8: Hitachi HDP725025GLA380, GM2OA57A, max UDMA/133 [ 3.000116] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.016123] ata1.00: configured for UDMA/133 [ 3.016215] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5 [ 3.016338] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.016525] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.016558] sd 0:0:0:0: [sda] Write Protect is off [ 3.016560] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.016578] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.016683] sda: sda1 sda2 [ 3.045999] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.082217] usb 2-1: configuration #1 chosen from 1 choice [ 3.388016] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 3.484032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.492164] ata2.00: ATAPI: HL-DT-ST DVD-RAM GH40L, 1.04, max UDMA/100 [ 3.508122] ata2.00: configured for UDMA/100 [ 3.516658] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH40L 1.04 PQ: 0 ANSI: 5 [ 3.538331] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.538333] Uniform CD-ROM driver Revision: 3.20 [ 3.538416] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.538464] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.608211] usb 2-2: configuration #1 chosen from 1 choice [ 3.617504] usbcore: registered new interface driver hiddev [ 3.624434] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input3 [ 3.624577] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-1/input0 [ 3.631395] input: Chicony Eclipse Multimedia Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4 [ 3.631491] generic-usb 0003:06A3:8018.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony Eclipse Multimedia Keyboard] on usb-0000:00:02.0-2/input0 [ 3.647227] input: Chicony Eclipse Multimedia Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input5 [ 3.647327] generic-usb 0003:06A3:8018.0003: input,hidraw2: USB HID v1.11 Device [Chicony Eclipse Multimedia Keyboard] on usb-0000:00:02.0-2/input1 [ 3.647348] usbcore: registered new interface driver usbhid [ 3.647434] usbhid: v2.6:USB HID core driver [ 3.858218] ata4: SATA link down (SStatus 0 SControl 300) [ 4.328076] xor: automatically using best checksumming function: pIII_sse [ 4.348007] pIII_sse : 8239.000 MB/sec [ 4.348009] xor: using function: pIII_sse (8239.000 MB/sec) [ 4.372061] device-mapper: dm-raid45: initialized v0.2594b [ 7.568115] usb-storage: device scan complete [ 7.568610] scsi 4:0:0:0: Direct-Access Memorex TD Classic 003B PMAP PQ: 0 ANSI: 0 CCS [ 7.569299] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 7.569971] sd 4:0:0:0: [sdb] 8030208 512-byte logical blocks: (4.11 GB/3.82 GiB) [ 7.570463] sd 4:0:0:0: [sdb] Write Protect is off [ 7.570466] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 7.570468] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.573340] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.573344] sdb: sdb1 [ 7.578986] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.578990] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 9.161958] aufs 2-standalone.tree-20091207 [ 9.177259] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 12.409870] kjournald starting. Commit interval 5 seconds [ 12.409895] EXT3 FS on loop1, internal journal [ 12.409901] ext3_orphan_cleanup: deleting unreferenced inode 16 [ 12.410004] ext3_orphan_cleanup: deleting unreferenced inode 15 [ 12.410025] ext3_orphan_cleanup: deleting unreferenced inode 14 [ 12.410032] EXT3-fs: loop1: 3 orphan inodes deleted [ 12.410033] EXT3-fs: recovery complete. [ 12.410179] EXT3-fs: mounted filesystem with ordered data mode. [ 12.411034] aufs test_add:243:exe[758]: uid/gid/perm //filesystem.squashfs 0/0/0755, 1000/1000/0755 [ 43.559061] udev: starting version 151 [ 43.990074] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 44.098439] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 44.098456] i2c i2c-1: nForce2 SMBus adapter at 0x1c40 [ 44.347755] cfg80211: Calling CRDA to update world regulatory domain [ 44.683767] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 44.683773] alloc irq_desc for 18 on node -1 [ 44.683775] alloc kstat_irqs on node -1 [ 44.683785] ath5k 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 44.683819] ath5k 0000:01:0a.0: registered as 'phy0' [ 45.128860] ath: EEPROM regdomain: 0x80d0 [ 45.128862] ath: EEPROM indicates we should expect a country code [ 45.128865] ath: doing EEPROM country->regdmn map search [ 45.128866] ath: country maps to regdmn code: 0x37 [ 45.128868] ath: Country alpha2 being used: DK [ 45.128869] ath: Regpair used: 0x37 [ 45.282751] cfg80211: World regulatory domain updated: [ 45.282755] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 45.282758] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.282760] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 45.282762] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 45.282764] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.282767] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.357152] phy0: Selected rate control algorithm 'minstrel' [ 45.357655] ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) [ 45.357658] ath5k phy0: RF2112B 2GHz radio found (0x46) [ 45.358034] cfg80211: Calling CRDA for country: DK [ 45.364530] cfg80211: Regulatory domain changed to country: DK [ 45.364533] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 45.364535] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 45.364537] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 45.364539] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 45.364541] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 45.644150] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 45.722201] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 45.722207] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 45.722210] hda_intel: Disable MSI for Nvidia chipset [ 45.722233] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 46.509216] hda_codec: ALC888: BIOS auto-probing. [ 46.725664] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 46.725671] alloc irq_desc for 16 on node -1 [ 46.725673] alloc kstat_irqs on node -1 [ 46.725683] pci 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 46.796089] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input6 [ 47.084437] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 47.084443] HDA Intel 0000:02:00.1: PCI INT B -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 47.084483] HDA Intel 0000:02:00.1: setting latency timer to 64 [ 47.431580] lp: driver loaded but no devices found [ 47.526848] ppdev: user-space parallel port driver [ 56.350283] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 82.654548] wlan0: direct probe to AP 02:1c:10:4a:3a:8a (try 1) [ 82.654568] wlan0: deauthenticating from 02:1c:10:4a:3a:8a by local choice (reason=3) [ 82.654596] wlan0: direct probe to AP 02:1c:10:4a:3a:8a (try 1) [ 82.658412] wlan0: direct probe responded [ 82.658417] wlan0: authenticate with AP 02:1c:10:4a:3a:8a (try 1) [ 82.664647] wlan0: authenticated [ 82.665047] wlan0: associate with AP 02:1c:10:4a:3a:8a (try 1) [ 82.666825] wlan0: RX AssocResp from 02:1c:10:4a:3a:8a (capab=0x1 status=0 aid=1) [ 82.666828] wlan0: associated [ 82.667401] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 92.672018] wlan0: no IPv6 routers present [ 112.504027] Clocksource tsc unstable (delta = -314641024 ns)