[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved) [ 0.000000] BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0FEDA0000 mask FFFFE0000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] modified: 00000000bffb0000 - 00000000bffc5400 (reserved) [ 0.000000] modified: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS) [ 0.000000] modified: 00000000bffe7fb8 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed9a000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37856000 - 37fefc17 [ 0.000000] Allocated new RAMDISK: 008e0000 - 01079c17 [ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fefc16 to 008e0000 - 01079c16 [ 0.000000] ACPI: RSDP 000f7c70 00024 (v02 HP ) [ 0.000000] ACPI: XSDT bffc81c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP bffc8084 000F4 (v04 HP 30C5 00000003 HP 00000001) [ 0.000000] ACPI: DSDT bffc84cc 12E41 (v01 HP 8510x 00010000 MSFT 03000001) [ 0.000000] ACPI: FACS bffe7d80 00040 [ 0.000000] ACPI: SLIC bffc8244 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: HPET bffc83bc 00038 (v01 HP 30C5 00000001 HP 00000001) [ 0.000000] ACPI: APIC bffc83f4 00068 (v01 HP 30C5 00000001 HP 00000001) [ 0.000000] ACPI: MCFG bffc845c 0003C (v01 HP 30C5 00000001 HP 00000001) [ 0.000000] ACPI: TCPA bffc8498 00032 (v02 HP 30C5 00000001 HP 00000001) [ 0.000000] ACPI: SSDT bffdb30d 00328 (v01 HP HPQSAT 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT bffdb635 0017C (v01 HP HPQMRM 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT bffdc177 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT bffdc3d6 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT bffdc47c 004D7 (v01 HP CpuPm 00003000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2183MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008dc000 - 00008df150] BRK ==> [00008dc000 - 00008df150] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e0000 - 0001079c17] NEW RAMDISK ==> [00008e0000 - 0001079c17] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bffb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffb0 [ 0.000000] On node 0 totalpages: 786251 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c107b000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4368 pages used for memmap [ 0.000000] HighMem zone: 554658 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780107 [ 0.000000] Kernel command line: root=UUID=8c7c7e6f-b6b4-4589-bb2e-68d6c5909e17 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15727040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bffb0) [ 0.000000] Memory: 3087260k/3145408k available (4679k kernel code, 56788k reserved, 2116k data, 660k init, 2236104k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2194.081 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.16 BogoMIPS (lpj=8776324) [ 0.004019] Security Framework initialized [ 0.004036] AppArmor: AppArmor initialized [ 0.004042] Mount-cache hash table entries: 512 [ 0.004154] Initializing cgroup subsys ns [ 0.004157] Initializing cgroup subsys cpuacct [ 0.004161] Initializing cgroup subsys memory [ 0.004167] Initializing cgroup subsys devices [ 0.004169] Initializing cgroup subsys freezer [ 0.004171] Initializing cgroup subsys net_cls [ 0.004188] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004190] CPU: L2 cache: 4096K [ 0.004193] CPU: Physical Processor ID: 0 [ 0.004195] CPU: Processor Core ID: 0 [ 0.004198] mce: CPU supports 6 MCE banks [ 0.004205] CPU0: Thermal monitoring handled by SMI [ 0.004208] using mwait in idle threads. [ 0.004215] Performance Events: Core2 events, Intel PMU driver. [ 0.004222] ... version: 2 [ 0.004223] ... bit width: 40 [ 0.004225] ... generic registers: 2 [ 0.004227] ... value mask: 000000ffffffffff [ 0.004228] ... max period: 000000007fffffff [ 0.004230] ... fixed-purpose events: 3 [ 0.004231] ... event mask: 0000000700000003 [ 0.004236] Checking 'hlt' instruction... OK. [ 0.022328] ACPI: Core revision 20090903 [ 0.044009] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044014] ftrace: allocating 21780 entries in 43 pages [ 0.048048] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.048396] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.090627] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 4096K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.176068] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.176079] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.180017] Brought up 2 CPUs [ 0.180020] Total of 2 processors activated (8777.13 BogoMIPS). [ 0.180627] CPU0 attaching sched-domain: [ 0.180630] domain 0: span 0-1 level MC [ 0.180632] groups: 0 1 [ 0.180638] CPU1 attaching sched-domain: [ 0.180639] domain 0: span 0-1 level MC [ 0.180642] groups: 1 0 [ 0.180730] devtmpfs: initialized [ 0.180730] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.180730] regulator: core version 0.5 [ 0.180730] Time: 14:11:58 Date: 08/13/10 [ 0.180730] NET: Registered protocol family 16 [ 0.180730] Trying to unpack rootfs image as initramfs... [ 0.180730] EISA bus registered [ 0.180730] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.180730] ACPI: bus type pci registered [ 0.180730] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.180730] PCI: Not using MMCONFIG. [ 0.181313] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40 [ 0.181315] PCI: Using configuration type 1 for base access [ 0.184089] bio: create slab at 0 [ 0.185328] ACPI: EC: Look up EC in DSDT [ 0.236258] ACPI: Interpreter enabled [ 0.236276] ACPI: (supports S0 S3 S4 S5) [ 0.236295] ACPI: Using IOAPIC for interrupt routing [ 0.236352] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.243636] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources [ 0.243639] PCI: Using MMCONFIG for extended config space [ 0.254606] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.254796] ACPI: Power Resource [C238] (on) [ 0.254839] ACPI: Power Resource [C254] (on) [ 0.254887] ACPI: Power Resource [C17C] (off) [ 0.254979] ACPI: Power Resource [C362] (off) [ 0.255066] ACPI: Power Resource [C365] (off) [ 0.255151] ACPI: Power Resource [C366] (off) [ 0.255238] ACPI: Power Resource [C367] (off) [ 0.255326] ACPI: Power Resource [C368] (off) [ 0.255367] ACPI: Power Resource [C369] (off) [ 0.255453] ACPI: Power Resource [C382] (off) [ 0.255539] ACPI: Power Resource [C383] (off) [ 0.255624] ACPI: Power Resource [C384] (off) [ 0.255708] ACPI: Power Resource [C385] (off) [ 0.255793] ACPI: Power Resource [C386] (off) [ 0.256143] ACPI: No dock devices found. [ 0.259790] ACPI: PCI Root Bridge [C003] (0000:00) [ 0.259911] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.259915] pci 0000:00:01.0: PME# disabled [ 0.260013] pci 0000:00:19.0: reg 10 32bit mmio: [0xe4500000-0xe451ffff] [ 0.260022] pci 0000:00:19.0: reg 14 32bit mmio: [0xe4520000-0xe4520fff] [ 0.260030] pci 0000:00:19.0: reg 18 io port: [0x5000-0x501f] [ 0.260085] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.260090] pci 0000:00:19.0: PME# disabled [ 0.260145] pci 0000:00:1a.0: reg 20 io port: [0x5020-0x503f] [ 0.260215] pci 0000:00:1a.1: reg 20 io port: [0x5040-0x505f] [ 0.260290] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe4521000-0xe45213ff] [ 0.260356] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.260362] pci 0000:00:1a.7: PME# disabled [ 0.260418] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4524000-0xe4527fff] [ 0.260483] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.260488] pci 0000:00:1b.0: PME# disabled [ 0.260585] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.260590] pci 0000:00:1c.0: PME# disabled [ 0.260692] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.260697] pci 0000:00:1c.1: PME# disabled [ 0.260804] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.260809] pci 0000:00:1c.4: PME# disabled [ 0.260878] pci 0000:00:1d.0: reg 20 io port: [0x5060-0x507f] [ 0.260945] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f] [ 0.261013] pci 0000:00:1d.2: reg 20 io port: [0x50a0-0x50bf] [ 0.261090] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4528000-0xe45283ff] [ 0.261156] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.261162] pci 0000:00:1d.7: PME# disabled [ 0.261345] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.261349] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO [ 0.261354] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.261362] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) [ 0.261417] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.261426] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.261434] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.261442] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.261450] pci 0000:00:1f.1: reg 20 io port: [0x50c0-0x50cf] [ 0.261527] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7] [ 0.261535] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7] [ 0.261543] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377] [ 0.261552] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577] [ 0.261560] pci 0000:00:1f.2: reg 20 io port: [0x5100-0x511f] [ 0.261568] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe4529000-0xe45297ff] [ 0.261613] pci 0000:00:1f.2: PME# supported from D3hot [ 0.261618] pci 0000:00:1f.2: PME# disabled [ 0.261678] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.261687] pci 0000:01:00.0: reg 14 io port: [0x4000-0x40ff] [ 0.261696] pci 0000:01:00.0: reg 18 32bit mmio: [0xe4400000-0xe440ffff] [ 0.261722] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.261753] pci 0000:01:00.0: supports D1 D2 [ 0.261803] pci 0000:01:00.1: reg 10 32bit mmio: [0xe4410000-0xe4413fff] [ 0.261869] pci 0000:01:00.1: supports D1 D2 [ 0.261944] pci 0000:00:01.0: bridge io port: [0x4000-0x4fff] [ 0.261948] pci 0000:00:01.0: bridge 32bit mmio: [0xe4400000-0xe44fffff] [ 0.261952] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.262149] pci 0000:10:00.0: reg 10 64bit mmio: [0xe4000000-0xe4001fff] [ 0.262282] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.262297] pci 0000:10:00.0: PME# disabled [ 0.262394] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe40fffff] [ 0.262464] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff] [ 0.262469] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe3ffffff] [ 0.262533] pci 0000:02:06.0: reg 10 32bit mmio: [0xe4100000-0xe4100fff] [ 0.262559] pci 0000:02:06.0: supports D1 D2 [ 0.262561] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.262566] pci 0000:02:06.0: PME# disabled [ 0.262613] pci 0000:02:06.1: reg 10 32bit mmio: [0xe4101000-0xe4101fff] [ 0.262638] pci 0000:02:06.1: supports D1 D2 [ 0.262640] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.262645] pci 0000:02:06.1: PME# disabled [ 0.262690] pci 0000:02:06.2: reg 10 32bit mmio: [0xe4102000-0xe41027ff] [ 0.262752] pci 0000:02:06.2: supports D1 D2 [ 0.262754] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.262758] pci 0000:02:06.2: PME# disabled [ 0.262804] pci 0000:02:06.3: reg 10 32bit mmio: [0xe4103000-0xe41030ff] [ 0.262869] pci 0000:02:06.3: supports D1 D2 [ 0.262871] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.262876] pci 0000:02:06.3: PME# disabled [ 0.262921] pci 0000:02:06.4: reg 10 32bit mmio: [0xe4104000-0xe41040ff] [ 0.262985] pci 0000:02:06.4: supports D1 D2 [ 0.262987] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.262992] pci 0000:02:06.4: PME# disabled [ 0.263053] pci 0000:00:1e.0: transparent bridge [ 0.263061] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4100000-0xe43fffff] [ 0.263137] pci_bus 0000:00: on NUMA node 0 [ 0.263142] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 0.263397] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT] [ 0.263462] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT] [ 0.263584] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT] [ 0.263656] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT] [ 0.263733] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT] [ 0.301120] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11) [ 0.301314] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) [ 0.301506] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) [ 0.301696] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5 [ 0.301887] ACPI: PCI Interrupt Link [C140] (IRQs *10 11) [ 0.302076] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5 [ 0.302266] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11) [ 0.302356] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20090903/pci_link-184) [ 0.302522] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.302528] vgaarb: loaded [ 0.302646] SCSI subsystem initialized [ 0.302734] libata version 3.00 loaded. [ 0.302804] usbcore: registered new interface driver usbfs [ 0.302815] usbcore: registered new interface driver hub [ 0.302840] usbcore: registered new device driver usb [ 0.303026] ACPI: WMI: Mapper loaded [ 0.303028] PCI: Using ACPI for IRQ routing [ 0.304783] NetLabel: Initializing [ 0.304785] NetLabel: domain hash size = 128 [ 0.304786] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.304798] NetLabel: unlabeled traffic allowed by default [ 0.304828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.304833] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.308022] Switching to clocksource tsc [ 0.309973] AppArmor: AppArmor Filesystem Enabled [ 0.309984] pnp: PnP ACPI init [ 0.309996] ACPI: bus type pnp registered [ 0.317756] alloc irq_desc for 23 on node -1 [ 0.317758] alloc kstat_irqs on node -1 [ 0.319443] pnp: PnP ACPI: found 15 devices [ 0.319445] ACPI: ACPI bus type pnp unregistered [ 0.319450] PnPBIOS: Disabled by ACPI PNP [ 0.319460] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.319463] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.319466] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved [ 0.319476] system 00:0b: ioport range 0x500-0x55f has been reserved [ 0.319479] system 00:0b: ioport range 0x800-0x80f has been reserved [ 0.319482] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.319485] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved [ 0.319490] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved [ 0.319493] system 00:0d: ioport range 0x1000-0x107f has been reserved [ 0.319495] system 00:0d: ioport range 0x1100-0x113f has been reserved [ 0.319498] system 00:0d: ioport range 0x1200-0x121f has been reserved [ 0.319501] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.319503] system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved [ 0.319506] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.319509] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.319511] system 00:0d: iomem range 0xfed90000-0xfed99fff has been reserved [ 0.319517] system 00:0e: iomem range 0xcf400-0xcffff has been reserved [ 0.319519] system 00:0e: iomem range 0xd2000-0xd3fff has been reserved [ 0.319522] system 00:0e: iomem range 0xfeda0000-0xfedbffff has been reserved [ 0.319525] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.354297] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.354301] pci 0000:00:01.0: IO window: 0x4000-0x4fff [ 0.354305] pci 0000:00:01.0: MEM window: 0xe4400000-0xe44fffff [ 0.354309] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.354314] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.354316] pci 0000:00:1c.0: IO window: disabled [ 0.354322] pci 0000:00:1c.0: MEM window: disabled [ 0.354326] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.354334] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 [ 0.354338] pci 0000:00:1c.1: IO window: 0x6000-0x6fff [ 0.354344] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe40fffff [ 0.354349] pci 0000:00:1c.1: PREFETCH window: 0x000000c8000000-0x000000c81fffff [ 0.354357] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28 [ 0.354361] pci 0000:00:1c.4: IO window: 0x2000-0x3fff [ 0.354367] pci 0000:00:1c.4: MEM window: 0xe0000000-0xe3ffffff [ 0.354373] pci 0000:00:1c.4: PREFETCH window: 0x000000c8200000-0x000000c83fffff [ 0.354385] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.354387] pci 0000:02:06.0: IO window: 0x007000-0x0070ff [ 0.354392] pci 0000:02:06.0: IO window: 0x007400-0x0074ff [ 0.354397] pci 0000:02:06.0: PREFETCH window: 0xc0000000-0xc3ffffff [ 0.354402] pci 0000:02:06.0: MEM window: 0xcc000000-0xcfffffff [ 0.354407] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:04 [ 0.354409] pci 0000:02:06.1: IO window: 0x007800-0x0078ff [ 0.354414] pci 0000:02:06.1: IO window: 0x007c00-0x007cff [ 0.354419] pci 0000:02:06.1: PREFETCH window: 0xc4000000-0xc7ffffff [ 0.354424] pci 0000:02:06.1: MEM window: 0xe8000000-0xebffffff [ 0.354429] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.354433] pci 0000:00:1e.0: IO window: 0x7000-0x7fff [ 0.354439] pci 0000:00:1e.0: MEM window: 0xe4100000-0xe43fffff [ 0.354445] pci 0000:00:1e.0: PREFETCH window: 0xc0000000-0xc7ffffff [ 0.354463] alloc irq_desc for 16 on node -1 [ 0.354465] alloc kstat_irqs on node -1 [ 0.354472] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.354476] pci 0000:00:01.0: setting latency timer to 64 [ 0.354487] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.354492] pci 0000:00:1c.0: setting latency timer to 64 [ 0.354503] alloc irq_desc for 17 on node -1 [ 0.354504] alloc kstat_irqs on node -1 [ 0.354508] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.354513] pci 0000:00:1c.1: setting latency timer to 64 [ 0.354524] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.354529] pci 0000:00:1c.4: setting latency timer to 64 [ 0.354538] pci 0000:00:1e.0: setting latency timer to 64 [ 0.354550] pci 0000:02:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.354562] pci 0000:02:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.354569] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.354571] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.354574] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.354576] pci_bus 0000:01: resource 1 mem: [0xe4400000-0xe44fffff] [ 0.354578] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.354581] pci_bus 0000:10: resource 0 io: [0x6000-0x6fff] [ 0.354583] pci_bus 0000:10: resource 1 mem: [0xe4000000-0xe40fffff] [ 0.354586] pci_bus 0000:10: resource 2 pref mem [0xc8000000-0xc81fffff] [ 0.354588] pci_bus 0000:28: resource 0 io: [0x2000-0x3fff] [ 0.354590] pci_bus 0000:28: resource 1 mem: [0xe0000000-0xe3ffffff] [ 0.354592] pci_bus 0000:28: resource 2 pref mem [0xc8200000-0xc83fffff] [ 0.354595] pci_bus 0000:02: resource 0 io: [0x7000-0x7fff] [ 0.354597] pci_bus 0000:02: resource 1 mem: [0xe4100000-0xe43fffff] [ 0.354599] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xc7ffffff] [ 0.354601] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.354603] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.354606] pci_bus 0000:03: resource 0 io: [0x7000-0x70ff] [ 0.354608] pci_bus 0000:03: resource 1 io: [0x7400-0x74ff] [ 0.354610] pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xc3ffffff] [ 0.354612] pci_bus 0000:03: resource 3 mem: [0xcc000000-0xcfffffff] [ 0.354615] pci_bus 0000:04: resource 0 io: [0x7800-0x78ff] [ 0.354617] pci_bus 0000:04: resource 1 io: [0x7c00-0x7cff] [ 0.354619] pci_bus 0000:04: resource 2 pref mem [0xc4000000-0xc7ffffff] [ 0.354621] pci_bus 0000:04: resource 3 mem: [0xe8000000-0xebffffff] [ 0.354662] NET: Registered protocol family 2 [ 0.354762] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.355074] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.355498] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.355737] TCP: Hash tables configured (established 131072 bind 65536) [ 0.355739] TCP reno registered [ 0.355809] NET: Registered protocol family 1 [ 0.355960] pci 0000:01:00.0: Boot video device [ 0.356145] cpufreq-nforce2: No nForce2 chipset. [ 0.356170] Scanning for low memory corruption every 60 seconds [ 0.356274] audit: initializing netlink socket (disabled) [ 0.356283] type=2000 audit(1281708718.355:1): initialized [ 0.360142] Freeing initrd memory: 7783k freed [ 0.365546] highmem bounce pool size: 64 pages [ 0.365551] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.366970] VFS: Disk quotas dquot_6.5.2 [ 0.367025] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.367574] fuse init (API version 7.13) [ 0.367659] msgmni has been set to 1679 [ 0.367859] alg: No test for stdrng (krng) [ 0.367907] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.367910] io scheduler noop registered [ 0.367912] io scheduler anticipatory registered [ 0.367914] io scheduler deadline registered [ 0.367949] io scheduler cfq registered (default) [ 0.368094] alloc irq_desc for 24 on node -1 [ 0.368096] alloc kstat_irqs on node -1 [ 0.368105] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.368111] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.368230] alloc irq_desc for 25 on node -1 [ 0.368231] alloc kstat_irqs on node -1 [ 0.368240] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.368251] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.368400] alloc irq_desc for 26 on node -1 [ 0.368402] alloc kstat_irqs on node -1 [ 0.368410] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.368421] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.368575] alloc irq_desc for 27 on node -1 [ 0.368576] alloc kstat_irqs on node -1 [ 0.368585] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X [ 0.368596] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.368699] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.368777] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.372287] ACPI: AC Adapter [C1F2] (on-line) [ 0.372382] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.372386] ACPI: Sleep Button [C274] [ 0.372426] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.372486] ACPI: Lid Switch [C26E] [ 0.372533] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.372535] ACPI: Power Button [PWRF] [ 0.372753] fan PNP0C0B:00: registered as cooling_device0 [ 0.372758] ACPI: Fan [C36A] (off) [ 0.372930] fan PNP0C0B:01: registered as cooling_device1 [ 0.372935] ACPI: Fan [C36B] (off) [ 0.373106] fan PNP0C0B:02: registered as cooling_device2 [ 0.373111] ACPI: Fan [C36C] (off) [ 0.373281] fan PNP0C0B:03: registered as cooling_device3 [ 0.373286] ACPI: Fan [C36D] (off) [ 0.373460] fan PNP0C0B:04: registered as cooling_device4 [ 0.373465] ACPI: Fan [C36E] (off) [ 0.373547] fan PNP0C0B:05: registered as cooling_device5 [ 0.373552] ACPI: Fan [C36F] (off) [ 0.373729] fan PNP0C0B:06: registered as cooling_device6 [ 0.373734] ACPI: Fan [C387] (off) [ 0.373908] fan PNP0C0B:07: registered as cooling_device7 [ 0.373913] ACPI: Fan [C388] (off) [ 0.374087] fan PNP0C0B:08: registered as cooling_device8 [ 0.374092] ACPI: Fan [C389] (off) [ 0.374263] fan PNP0C0B:09: registered as cooling_device9 [ 0.374268] ACPI: Fan [C38A] (off) [ 0.374439] fan PNP0C0B:0a: registered as cooling_device10 [ 0.374444] ACPI: Fan [C38B] (off) [ 0.375050] ACPI: SSDT bffdb879 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.375612] ACPI: SSDT bffdbb7d 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.377706] Monitor-Mwait will be used to enter C-1 state [ 0.377731] Monitor-Mwait will be used to enter C-2 state [ 0.377739] Marking TSC unstable due to TSC halts in idle [ 0.377774] Switching to clocksource hpet [ 0.377815] processor LNXCPU:00: registered as cooling_device11 [ 0.378138] ACPI: SSDT bffdb7b1 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.378520] ACPI: SSDT bffdbaf8 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.379421] processor LNXCPU:01: registered as cooling_device12 [ 0.389204] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.389212] ACPI: Thermal Zone [TZ2] (33 C) [ 0.392808] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.392816] ACPI: Thermal Zone [TZ3] (25 C) [ 0.401472] thermal LNXTHERM:03: registered as thermal_zone2 [ 0.401480] ACPI: Thermal Zone [TZ4] (25 C) [ 0.405188] thermal LNXTHERM:04: registered as thermal_zone3 [ 0.405195] ACPI: Thermal Zone [TZ5] (75 C) [ 0.423267] thermal LNXTHERM:05: registered as thermal_zone4 [ 0.423275] ACPI: Thermal Zone [TZ0] (40 C) [ 0.426786] thermal LNXTHERM:06: registered as thermal_zone5 [ 0.426794] ACPI: Thermal Zone [TZ1] (36 C) [ 0.427457] ACPI: Battery Slot [C1F3] (battery absent) [ 0.427468] isapnp: Scanning for PnP cards... [ 0.428267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.429587] brd: module loaded [ 0.430012] loop: module loaded [ 0.430088] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.430168] ata_piix 0000:00:1f.1: version 2.13 [ 0.430181] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.430218] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.430292] scsi0 : ata_piix [ 0.430353] scsi1 : ata_piix [ 0.430816] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14 [ 0.430819] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15 [ 0.431128] Fixed MDIO Bus: probed [ 0.431164] PPP generic driver version 2.4.2 [ 0.431196] tun: Universal TUN/TAP device driver, 1.6 [ 0.431198] tun: (C) 1999-2004 Max Krasnyansky [ 0.431269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.431287] alloc irq_desc for 18 on node -1 [ 0.431289] alloc kstat_irqs on node -1 [ 0.431294] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.431304] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.431308] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.431336] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.431364] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.435250] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.435262] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4521000 [ 0.439358] ata2: port disabled. ignoring. [ 0.448020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.448106] usb usb1: configuration #1 chosen from 1 choice [ 0.448132] hub 1-0:1.0: USB hub found [ 0.448139] hub 1-0:1.0: 4 ports detected [ 0.448233] alloc irq_desc for 20 on node -1 [ 0.448234] alloc kstat_irqs on node -1 [ 0.448239] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.448248] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.448251] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.448279] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.448307] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.452189] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.452213] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4528000 [ 0.468019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.468091] usb usb2: configuration #1 chosen from 1 choice [ 0.468115] hub 2-0:1.0: USB hub found [ 0.468122] hub 2-0:1.0: 6 ports detected [ 0.468178] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.468192] uhci_hcd: USB Universal Host Controller Interface driver [ 0.468211] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.468221] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.468225] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.468288] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.468325] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005020 [ 0.468408] usb usb3: configuration #1 chosen from 1 choice [ 0.468433] hub 3-0:1.0: USB hub found [ 0.468441] hub 3-0:1.0: 2 ports detected [ 0.468483] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.468489] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.468493] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.468519] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.468552] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005040 [ 0.468636] usb usb4: configuration #1 chosen from 1 choice [ 0.468659] hub 4-0:1.0: USB hub found [ 0.468665] hub 4-0:1.0: 2 ports detected [ 0.468709] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.468715] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.468718] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.468745] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.468772] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005060 [ 0.468854] usb usb5: configuration #1 chosen from 1 choice [ 0.468877] hub 5-0:1.0: USB hub found [ 0.468883] hub 5-0:1.0: 2 ports detected [ 0.468929] alloc irq_desc for 22 on node -1 [ 0.468931] alloc kstat_irqs on node -1 [ 0.468935] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.468941] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.468944] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.468971] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.469004] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005080 [ 0.469084] usb usb6: configuration #1 chosen from 1 choice [ 0.469107] hub 6-0:1.0: USB hub found [ 0.469112] hub 6-0:1.0: 2 ports detected [ 0.469153] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.469160] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.469163] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.469193] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.469220] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050a0 [ 0.469300] usb usb7: configuration #1 chosen from 1 choice [ 0.469323] hub 7-0:1.0: USB hub found [ 0.469329] hub 7-0:1.0: 2 ports detected [ 0.469443] PNP: PS/2 Controller [PNP0303:C251,PNP0f13:C252] at 0x60,0x64 irq 1,12 [ 0.471102] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.471762] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.471768] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.471791] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.471811] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.471830] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.471926] mice: PS/2 mouse device common for all mice [ 0.472077] rtc_cmos 00:07: RTC can wake from S4 [ 0.472112] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.472144] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.472235] device-mapper: uevent: version 1.0.3 [ 0.472349] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.472420] device-mapper: multipath: version 1.1.0 loaded [ 0.472423] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.472518] EISA: Probing bus 0 at eisa.0 [ 0.472524] Cannot allocate resource for EISA slot 1 [ 0.472525] Cannot allocate resource for EISA slot 2 [ 0.472527] Cannot allocate resource for EISA slot 3 [ 0.472529] Cannot allocate resource for EISA slot 4 [ 0.472531] Cannot allocate resource for EISA slot 5 [ 0.472533] Cannot allocate resource for EISA slot 6 [ 0.472534] Cannot allocate resource for EISA slot 7 [ 0.472540] EISA: Detected 0 cards. [ 0.472651] cpuidle: using governor ladder [ 0.472731] cpuidle: using governor menu [ 0.473126] TCP cubic registered [ 0.473287] NET: Registered protocol family 10 [ 0.473716] lo: Disabled Privacy Extensions [ 0.474028] NET: Registered protocol family 17 [ 0.474478] Using IPI No-Shortcut mode [ 0.474540] PM: Resume from disk failed. [ 0.474550] registered taskstats version 1 [ 0.475109] Magic number: 6:90:182 [ 0.475138] acpi device:41: hash matches [ 0.475189] rtc_cmos 00:07: setting system clock to 2010-08-13 14:11:59 UTC (1281708719) [ 0.475192] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.475194] EDD information not available. [ 0.479769] ACPI: Battery Slot [C1F4] (battery present) [ 0.493471] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.600380] ata1.00: ATAPI: Optiarc DVD RW AD-7560A, DH10, max MWDMA2 [ 0.616281] ata1.00: configured for MWDMA2 [ 0.781636] isapnp: No Plug & Play device found [ 0.782750] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DH10 PQ: 0 ANSI: 5 [ 0.785830] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.785833] Uniform CD-ROM driver Revision: 3.20 [ 0.785909] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.785949] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.786060] Freeing unused kernel memory: 660k freed [ 0.786442] Write protecting the kernel text: 4680k [ 0.786495] Write protecting the kernel read-only data: 1840k [ 0.801800] udev: starting version 151 [ 0.906887] ahci 0000:00:1f.2: version 3.0 [ 0.906908] alloc irq_desc for 21 on node -1 [ 0.906910] alloc kstat_irqs on node -1 [ 0.906917] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 0.906960] alloc irq_desc for 28 on node -1 [ 0.906962] alloc kstat_irqs on node -1 [ 0.906971] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 0.907008] ahci: SSS flag set, parallel bus scan disabled [ 0.907032] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 0.907035] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc [ 0.907041] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.907289] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 0.907291] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.928119] scsi2 : ahci [ 0.945995] scsi3 : ahci [ 0.946210] scsi4 : ahci [ 0.946293] ata3: SATA max UDMA/133 abar m2048@0xe4529000 port 0xe4529100 irq 28 [ 0.946295] ata4: DUMMY [ 0.946297] ata5: DUMMY [ 0.946366] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.946377] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.946485] alloc irq_desc for 29 on node -1 [ 0.946487] alloc kstat_irqs on node -1 [ 0.946500] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X [ 1.168053] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.186573] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:29:a1:b9:f0 [ 1.186575] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.186603] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff [ 1.264068] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.266161] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.266165] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.266376] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.266379] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.267519] ata3.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133 [ 1.267522] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.269798] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.269802] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.270013] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.270016] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.271206] ata3.00: configured for UDMA/133 [ 1.286630] ata3.00: configured for UDMA/133 [ 1.286632] ata3: EH complete [ 1.286753] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5 [ 1.286887] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.286970] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.287013] sd 2:0:0:0: [sda] Write Protect is off [ 1.287016] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.287044] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.287157] sda: sda1 sda2 < sda5 > [ 1.332192] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.334764] ohci1394 0000:02:06.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.336428] usb 3-1: configuration #1 chosen from 1 choice [ 1.391066] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e4102000-e41027ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.576052] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 1.599930] kjournald starting. Commit interval 5 seconds [ 1.599953] EXT3-fs: mounted filesystem with ordered data mode. [ 1.737912] usb 5-2: configuration #1 chosen from 1 choice [ 1.976042] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 2.150145] usb 6-1: configuration #1 chosen from 1 choice [ 2.664576] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929bd4510] [ 26.521018] udev: starting version 151 [ 26.613201] Adding 9068652k swap on /dev/sda5. Priority:-1 extents:1 across:9068652k [ 26.652042] Linux agpgart interface v0.103 [ 26.707957] lp: driver loaded but no devices found [ 26.729097] type=1505 audit(1281708745.752:2): operation="profile_load" pid=549 name="/sbin/dhclient3" [ 26.729175] cfg80211: Calling CRDA to update world regulatory domain [ 26.729729] type=1505 audit(1281708745.752:3): operation="profile_load" pid=549 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 26.730077] type=1505 audit(1281708745.752:4): operation="profile_load" pid=549 name="/usr/lib/connman/scripts/dhclient-script" [ 26.731975] vga16fb: initializing [ 26.731978] vga16fb: mapped to 0xc00a0000 [ 26.732048] fb0: VGA16 VGA frame buffer device [ 26.829605] cfg80211: World regulatory domain updated: [ 26.829608] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.829611] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.829613] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.829615] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.829618] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.829620] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.847284] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 26.847289] Disabling lock debugging due to kernel taint [ 26.953805] [fglrx] Maximum main memory to use for locked dma buffers: 2878 MBytes. [ 26.954162] [fglrx] vendor: 1002 device: 9581 count: 1 [ 26.954704] [fglrx] ioport: bar 1, base 0x4000, size: 0x100 [ 26.954723] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 26.954731] pci 0000:01:00.0: setting latency timer to 64 [ 26.954945] [fglrx] Kernel PAT support is enabled [ 26.954967] [fglrx] module loaded - fglrx 8.75.5 [Jun 29 2010] with 1 minors [ 26.964441] Bluetooth: Core ver 2.15 [ 26.964480] NET: Registered protocol family 31 [ 26.964482] Bluetooth: HCI device and connection manager initialized [ 26.964484] Bluetooth: HCI socket layer initialized [ 26.966486] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 26.966583] usbcore: registered new interface driver btusb [ 26.971907] ricoh-mmc: Ricoh MMC Controller disabling driver [ 26.971910] ricoh-mmc: Copyright(c) Philip Langdale [ 26.971932] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10) [ 26.971951] ricoh-mmc: Controller is now disabled. [ 26.981457] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c5] [ 26.997133] lis3lv02d: hardware type NC8510 found. [ 26.997838] lis3lv02d: 2-byte sensor found [ 27.002938] parport_pc 00:02: reported by Plug and Play ACPI [ 27.003014] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 27.015271] acpi device:01: registered as cooling_device13 [ 27.015967] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5 [ 27.016042] ACPI: Video Device [C14B] (multi-head: yes rom: no post: no) [ 27.027858] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 [ 27.028530] Registered led device: hp::hddprotect [ 27.028575] lis3lv02d driver loaded. [ 27.064152] usbcore: registered new interface driver hiddev [ 27.079277] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input7 [ 27.079359] generic-usb 0003:046D:C001.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0 [ 27.079379] usbcore: registered new interface driver usbhid [ 27.079381] usbhid: v2.6:USB HID core driver [ 27.083042] sdhci: Secure Digital Host Controller Interface driver [ 27.083043] sdhci: Copyright(c) Pierre Ossman [ 27.104176] lp0: using parport0 (interrupt-driven). [ 27.112705] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c38, PCI irq 16 [ 27.112709] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 27.112715] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff [ 27.112718] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: clean. [ 27.112935] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 27.112937] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xc0000000 - 0xc7ffffff [ 27.115234] ppdev: user-space parallel port driver [ 27.117831] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16) [ 27.131314] sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20) [ 27.131332] alloc irq_desc for 19 on node -1 [ 27.131334] alloc kstat_irqs on node -1 [ 27.131339] sdhci-pci 0000:02:06.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 27.133394] Registered led device: mmc0:: [ 27.134424] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO [ 27.134530] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:30c5] [ 27.143838] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 27.143840] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 27.143916] iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 27.143937] iwlagn 0000:10:00.0: setting latency timer to 64 [ 27.143985] iwlagn 0000:10:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 27.204950] Console: switching to colour frame buffer device 80x30 [ 27.245568] iwlagn 0000:10:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 27.245642] alloc irq_desc for 30 on node -1 [ 27.245644] alloc kstat_irqs on node -1 [ 27.245665] iwlagn 0000:10:00.0: irq 30 for MSI/MSI-X [ 27.250724] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 27.250771] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 27.250782] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 27.250824] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 27.252105] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 27.299504] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0c38, PCI irq 17 [ 27.299510] yenta_cardbus 0000:02:06.1: Socket status: 30000810 [ 27.299516] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07 [ 27.299533] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff [ 27.299536] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x7000-0x7fff: clean. [ 27.299758] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 27.299760] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xc0000000 - 0xc7ffffff [ 27.354904] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 27.362564] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 27.362595] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 27.698609] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa44793/0x300000 [ 27.698614] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 27.739824] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9 [ 27.944036] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 [ 27.944045] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff [ 27.950763] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 [ 27.992993] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 27.995091] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 27.995978] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 27.996726] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: [ 27.997408] scsi5 : pata_pcmcia [ 27.997579] ata6: PATA max PIO0 cmd 0x7100 ctl 0x710e irq 3 [ 27.997605] clean. [ 27.997743] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 28.003517] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 28.005728] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. [ 28.006600] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 28.007328] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 28.008238] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 30.258061] psmouse serio5: ID: 10 00 64 [ 32.969531] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input10 [ 757.207048] EXT3 FS on sda1, internal journal [ 757.537114] type=1505 audit(1281709476.560:5): operation="profile_load" pid=950 name="/usr/share/gdm/guest-session/Xsession" [ 757.538640] type=1505 audit(1281709476.560:6): operation="profile_replace" pid=951 name="/sbin/dhclient3" [ 757.539281] type=1505 audit(1281709476.560:7): operation="profile_replace" pid=951 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 757.539634] type=1505 audit(1281709476.560:8): operation="profile_replace" pid=951 name="/usr/lib/connman/scripts/dhclient-script" [ 757.545389] type=1505 audit(1281709476.568:9): operation="profile_load" pid=952 name="/usr/bin/evince" [ 757.553758] type=1505 audit(1281709476.576:10): operation="profile_load" pid=952 name="/usr/bin/evince-previewer" [ 757.559242] type=1505 audit(1281709476.580:11): operation="profile_load" pid=952 name="/usr/bin/evince-thumbnailer" [ 757.566053] type=1505 audit(1281709476.588:12): operation="profile_load" pid=957 name="/usr/lib/cups/backend/cups-pdf" [ 757.566746] type=1505 audit(1281709476.588:13): operation="profile_load" pid=957 name="/usr/sbin/cupsd" [ 757.568747] type=1505 audit(1281709476.592:14): operation="profile_load" pid=958 name="/usr/sbin/tcpdump" [ 757.716081] apm: BIOS not found. [ 758.440280] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X [ 758.496141] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X [ 758.496405] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 758.498076] iwlagn 0000:10:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 758.500997] iwlagn 0000:10:00.0: loaded firmware version 228.61.2.24 [ 758.718745] Registered led device: iwl-phy0::radio [ 758.718763] Registered led device: iwl-phy0::assoc [ 758.718783] Registered led device: iwl-phy0::RX [ 758.718802] Registered led device: iwl-phy0::TX [ 758.750942] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 758.842238] enabling dynamically allocated vcaches [ 758.842241] Starting AFS cache scan... [ 758.850382] Bluetooth: L2CAP ver 2.14 [ 758.850385] Bluetooth: L2CAP socket layer initialized [ 758.872262] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 758.872265] Bluetooth: BNEP filters: protocol multicast [ 758.888929] Bridge firewalling registered [ 758.894628] Bluetooth: SCO (Voice Link) ver 0.6 [ 758.894631] Bluetooth: SCO socket layer initialized [ 759.241092] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0 [ 759.275151] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [ 759.717553] found 6128 non-empty cache files (39%). [ 760.650546] alloc irq_desc for 31 on node -1 [ 760.650549] alloc kstat_irqs on node -1 [ 760.650562] fglrx_pci 0000:01:00.0: irq 31 for MSI/MSI-X [ 760.651251] [fglrx] Firegl kernel thread PID: 1646 [ 760.651437] [fglrx] IRQ 31 Enabled [ 761.261036] [fglrx:firegl_cmmqs_BIOSControl] *ERROR* CMMQS BIOS Control: CMMQS handle is not valid. [ 761.261042] [fglrx:firegl_bios_control] *ERROR* CMMQS BIOS Control is failed: firegl_bios_control [ 761.261071] [fglrx:firegl_unlock] *ERROR* Process 1311 using kernel context 0 [ 763.945187] hci_cmd_task: hci0 command tx timeout [ 763.963491] Bluetooth: RFCOMM TTY layer initialized [ 763.963496] Bluetooth: RFCOMM socket layer initialized [ 763.963498] Bluetooth: RFCOMM ver 1.11 [ 765.404526] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 804.353358] wlan0: deauthenticating from 00:0f:61:86:00:92 by local choice (reason=3) [ 804.353530] wlan0: direct probe to AP 00:0f:61:86:00:92 (try 1) [ 804.361197] wlan0: direct probe responded [ 804.361202] wlan0: authenticate with AP 00:0f:61:86:00:92 (try 1) [ 804.365054] wlan0: authenticated [ 804.365075] wlan0: associate with AP 00:0f:61:86:00:92 (try 1) [ 804.366892] wlan0: RX AssocResp from 00:0f:61:86:00:92 (capab=0x821 status=0 aid=4) [ 804.366895] wlan0: associated [ 804.387047] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 804.387099] cfg80211: Calling CRDA for country: CH [ 804.390013] cfg80211: Received country IE: [ 804.390015] cfg80211: Regulatory domain: CH [ 804.390017] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 804.390019] (2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 804.390021] cfg80211: CRDA thinks this should applied: [ 804.390022] cfg80211: Regulatory domain: CH [ 804.390023] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 804.390025] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 804.390027] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 804.390029] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 804.390031] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 804.390033] cfg80211: We intersect both of these and get: [ 804.390034] cfg80211: Regulatory domain: 98 [ 804.390035] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 804.390037] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 804.390042] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [ 804.390044] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [ 804.390045] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [ 804.390047] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [ 804.390049] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [ 804.390051] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [ 804.390053] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [ 804.390055] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [ 804.390057] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [ 804.390059] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [ 804.390060] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [ 804.390062] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [ 804.390064] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [ 804.390066] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [ 804.390068] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [ 804.390070] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [ 804.390072] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [ 804.390074] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [ 804.390075] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [ 804.390078] cfg80211: Current regulatory domain updated by AP to: CH [ 804.390079] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 804.390081] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 809.054081] Slow work thread pool: Starting up [ 809.054125] Slow work thread pool: Ready [ 811.276645] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 811.276649] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 811.276654] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 811.276659] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 10 00 00 02 00 [ 811.276668] end_request: I/O error, dev sr0, sector 1188928 [ 811.276673] Buffer I/O error on device sr0, logical block 148616 [ 811.313768] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 811.313772] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 811.313776] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 811.313781] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 10 00 00 02 00 [ 811.313789] end_request: I/O error, dev sr0, sector 1188928 [ 811.313792] Buffer I/O error on device sr0, logical block 148616 [ 811.406541] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 811.406546] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 811.406550] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 811.406555] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 10 00 00 02 00 [ 811.406564] end_request: I/O error, dev sr0, sector 1188928 [ 811.406568] Buffer I/O error on device sr0, logical block 148616 [ 811.445918] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 811.445922] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 811.445926] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 811.445930] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 10 00 00 02 00 [ 811.445939] end_request: I/O error, dev sr0, sector 1188928 [ 811.445941] Buffer I/O error on device sr0, logical block 148616 [ 811.480708] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 811.480712] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 811.480716] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 811.480720] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 10 00 00 02 00 [ 811.480728] end_request: I/O error, dev sr0, sector 1188928 [ 811.480731] Buffer I/O error on device sr0, logical block 148616 [ 811.517728] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 811.517733] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 811.517737] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 811.517743] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 10 00 00 02 00 [ 811.517753] end_request: I/O error, dev sr0, sector 1188928 [ 811.517757] Buffer I/O error on device sr0, logical block 148616 [ 811.554794] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 811.554799] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 811.554804] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 811.554809] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 10 00 00 02 00 [ 811.554819] end_request: I/O error, dev sr0, sector 1188928 [ 811.554823] Buffer I/O error on device sr0, logical block 148616 [ 812.183321] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 812.183325] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 812.183329] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 812.183334] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 10 00 00 02 00 [ 812.183343] end_request: I/O error, dev sr0, sector 1188928 [ 812.183347] Buffer I/O error on device sr0, logical block 297232 [ 812.183349] Buffer I/O error on device sr0, logical block 297233 [ 812.258559] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 812.258564] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 812.258568] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 812.258573] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 10 00 00 02 00 [ 812.258582] end_request: I/O error, dev sr0, sector 1188928 [ 812.258587] Buffer I/O error on device sr0, logical block 297232 [ 812.296208] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 812.296212] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 812.296216] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 812.296220] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 10 00 00 02 00 [ 812.296229] end_request: I/O error, dev sr0, sector 1188928 [ 813.396793] UDF-fs: No VRS found [ 813.396796] UDF-fs: No partition found (1) [ 813.465927] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 813.524000] ISOFS: changing to secondary root [ 815.101053] wlan0: no IPv6 routers present [ 2886.460061] CE: hpet increasing min_delta_ns to 15000 nsec [ 2997.992115] hub 6-0:1.0: port 1 disabled by hub (EMI?), re-enabling... [ 2997.992124] usb 6-1: USB disconnect, address 2 [ 2998.256049] usb 6-1: new low speed USB device using uhci_hcd and address 3 [ 2998.429686] usb 6-1: configuration #1 chosen from 1 choice [ 2998.448132] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input11 [ 2998.448372] generic-usb 0003:046D:C001.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0 [ 3226.521604] hci_cmd_task: hci0 command tx timeout [ 3241.207157] hci_cmd_task: hci0 command tx timeout [ 4186.307771] hci_cmd_task: hci0 command tx timeout [ 4201.290755] hci_cmd_task: hci0 command tx timeout [ 4932.189134] wlan0: deauthenticating from 00:0f:61:86:00:92 by local choice (reason=3) [ 4932.203761] wlan0: deauthenticating from 00:0f:61:86:00:92 by local choice (reason=3) [ 4932.211334] wlan0: direct probe to AP 00:0f:61:14:5f:82 (try 1) [ 4932.215898] wlan0: direct probe responded [ 4932.215906] wlan0: authenticate with AP 00:0f:61:14:5f:82 (try 1) [ 4932.220609] wlan0: authenticated [ 4932.221933] wlan0: associate with AP 00:0f:61:14:5f:82 (try 1) [ 4932.225041] wlan0: RX AssocResp from 00:0f:61:14:5f:82 (capab=0xc21 status=0 aid=1) [ 4932.225049] wlan0: associated [ 5292.157085] wlan0: deauthenticating from 00:0f:61:14:5f:82 by local choice (reason=3) [ 5292.171450] wlan0: deauthenticating from 00:0f:61:14:5f:82 by local choice (reason=3) [ 5292.179386] wlan0: direct probe to AP 00:0f:61:86:00:92 (try 1) [ 5292.184244] wlan0: direct probe responded [ 5292.184252] wlan0: authenticate with AP 00:0f:61:86:00:92 (try 1) [ 5292.188133] wlan0: authenticated [ 5292.188530] wlan0: associate with AP 00:0f:61:86:00:92 (try 1) [ 5292.190120] wlan0: RX AssocResp from 00:0f:61:86:00:92 (capab=0x821 status=0 aid=4) [ 5292.190128] wlan0: associated [ 6132.237224] wlan0: deauthenticating from 00:0f:61:86:00:92 by local choice (reason=3) [ 6132.252473] wlan0: deauthenticating from 00:0f:61:86:00:92 by local choice (reason=3) [ 6132.260289] wlan0: direct probe to AP 00:0f:61:14:5f:82 (try 1) [ 6132.264770] wlan0: direct probe responded [ 6132.264779] wlan0: authenticate with AP 00:0f:61:14:5f:82 (try 1) [ 6132.269681] wlan0: authenticated [ 6132.269722] wlan0: associate with AP 00:0f:61:14:5f:82 (try 1) [ 6132.271334] wlan0: RX AssocResp from 00:0f:61:14:5f:82 (capab=0xc21 status=0 aid=3) [ 6132.271342] wlan0: associated [ 6252.388121] wlan0: deauthenticating from 00:0f:61:14:5f:82 by local choice (reason=3) [ 6252.402157] wlan0: deauthenticating from 00:0f:61:14:5f:82 by local choice (reason=3) [ 6252.410458] wlan0: direct probe to AP 00:0f:61:86:00:92 (try 1) [ 6252.412052] wlan0: direct probe responded [ 6252.412059] wlan0: authenticate with AP 00:0f:61:86:00:92 (try 1) [ 6252.414566] wlan0: authenticated [ 6252.420448] wlan0: associate with AP 00:0f:61:86:00:92 (try 1) [ 6252.422009] wlan0: RX AssocResp from 00:0f:61:86:00:92 (capab=0x821 status=0 aid=3) [ 6252.422012] wlan0: associated [ 7848.996034] CE: hpet increasing min_delta_ns to 22500 nsec [ 9556.743873] CE: hpet increasing min_delta_ns to 33750 nsec [14060.032115] hub 6-0:1.0: port 1 disabled by hub (EMI?), re-enabling... [14060.032128] usb 6-1: USB disconnect, address 3 [14060.296084] usb 6-1: new low speed USB device using uhci_hcd and address 4 [14060.470201] usb 6-1: configuration #1 chosen from 1 choice [14060.489111] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input12 [14060.489223] generic-usb 0003:046D:C001.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0