[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5 09:20:59 UTC 2010 (Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009b800 (usable) [ 0.000000] modified: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] modified: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] modified: 00000000bfee3000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfed0000 page 4k [ 0.000000] kernel direct mapping tables up to bfed0000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] RAMDISK: 7f69d000 - 7ffff9bd [ 0.000000] ACPI: RSDP 00000000000f7100 00024 (v02 TOSCPL) [ 0.000000] ACPI: XSDT 00000000bfed729a 00094 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bfedfb60 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000bfed8618 074D4 (v02 TOSCPL CRESTLNE 06040000 INTL 20060608) [ 0.000000] ACPI: FACS 00000000bfee2fc0 00040 [ 0.000000] ACPI: APIC 00000000bfedfc54 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 00000000bfedfcbc 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000bfedfcf4 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 00000000bfedfd30 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TMOR 00000000bfedfd62 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: SLIC 00000000bfedfd88 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000) [ 0.000000] ACPI: OSFR 00000000bfedfefe 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000) [ 0.000000] ACPI: APIC 00000000bfedff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bfedffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bfed836b 002AD (v01 SataRe SataAhci 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed78ba 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed7814 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed732e 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff] [ 0.000000] bootmap [0000000000011000 - 0000000000038fff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [007f69d000 - 007ffff9bd] RAMDISK ==> [007f69d000 - 007ffff9bd] [ 0.000000] #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a301b4] BRK ==> [0001a30000 - 0001a301b4] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f7180] f7180 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x000bfed0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048166 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3827 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767752 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bfee3000 [ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030139 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4048824k/5242880k available (5422k kernel code, 1050216k absent, 143840k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.128 MHz processor. [ 0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.25 BogoMIPS (lpj=19951280) [ 0.010036] Security Framework initialized [ 0.010057] AppArmor: AppArmor initialized [ 0.010457] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012836] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.014004] Mount-cache hash table entries: 256 [ 0.014168] Initializing cgroup subsys ns [ 0.014175] Initializing cgroup subsys cpuacct [ 0.014179] Initializing cgroup subsys memory [ 0.014188] Initializing cgroup subsys devices [ 0.014190] Initializing cgroup subsys freezer [ 0.014192] Initializing cgroup subsys net_cls [ 0.014214] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.014216] CPU: L2 cache: 4096K [ 0.014219] CPU 0/0x0 -> Node 0 [ 0.014222] CPU: Physical Processor ID: 0 [ 0.014223] CPU: Processor Core ID: 0 [ 0.014226] mce: CPU supports 6 MCE banks [ 0.014234] CPU0: Thermal monitoring handled by SMI [ 0.014240] using mwait in idle threads. [ 0.014242] Performance Events: Core2 events, Intel PMU driver. [ 0.014249] ... version: 2 [ 0.014250] ... bit width: 40 [ 0.014251] ... generic registers: 2 [ 0.014253] ... value mask: 000000ffffffffff [ 0.014255] ... max period: 000000007fffffff [ 0.014256] ... fixed-purpose events: 3 [ 0.014258] ... event mask: 0000000700000003 [ 0.016712] ACPI: Core revision 20090903 [ 0.030010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030015] ftrace: allocating 22527 entries in 89 pages [ 0.040057] Setting APIC routing to flat [ 0.040405] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.143479] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 4096K [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] CPU1: Thermal monitoring handled by SMI [ 0.300073] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 0.300081] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.310020] Brought up 2 CPUs [ 0.310023] Total of 2 processors activated (7980.28 BogoMIPS). [ 0.310664] CPU0 attaching sched-domain: [ 0.310667] domain 0: span 0-1 level MC [ 0.310670] groups: 0 1 [ 0.310677] CPU1 attaching sched-domain: [ 0.310679] domain 0: span 0-1 level MC [ 0.310681] groups: 1 0 [ 0.310777] devtmpfs: initialized [ 0.310777] regulator: core version 0.5 [ 0.310777] Time: 3:41:20 Date: 07/31/10 [ 0.310777] NET: Registered protocol family 16 [ 0.310777] Trying to unpack rootfs image as initramfs... [ 0.310777] ACPI: bus type pci registered [ 0.310777] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.310777] PCI: MCFG area at e0000000 reserved in E820 [ 0.321218] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.321220] PCI: Using configuration type 1 for base access [ 0.380141] bio: create slab at 0 [ 0.381199] ACPI: EC: Look up EC in DSDT [ 0.390059] ACPI: BIOS _OSI(Linux) query ignored [ 0.397984] ACPI: Interpreter enabled [ 0.397988] ACPI: (supports S0 S3 S4 S5) [ 0.398010] ACPI: Using IOAPIC for interrupt routing [ 0.400573] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.530822] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.531225] ACPI: No dock devices found. [ 0.531857] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.531986] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.531990] pci 0000:00:01.0: PME# disabled [ 0.532084] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] [ 0.532154] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] [ 0.532232] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4704800-0xf4704bff] [ 0.532301] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.532306] pci 0000:00:1a.7: PME# disabled [ 0.532365] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4700000-0xf4703fff] [ 0.532431] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.532436] pci 0000:00:1b.0: PME# disabled [ 0.532537] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.532542] pci 0000:00:1c.0: PME# disabled [ 0.532645] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.532650] pci 0000:00:1c.1: PME# disabled [ 0.532753] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.532758] pci 0000:00:1c.2: PME# disabled [ 0.532860] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.532865] pci 0000:00:1c.3: PME# disabled [ 0.532936] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f] [ 0.533008] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f] [ 0.533078] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f] [ 0.533155] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4704c00-0xf4704fff] [ 0.533225] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.533230] pci 0000:00:1d.7: PME# disabled [ 0.533410] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.533414] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.533419] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.533423] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) [ 0.533480] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.533489] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.533497] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.533505] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.533513] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af] [ 0.533595] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df] [ 0.533604] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf] [ 0.533612] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7] [ 0.533620] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb] [ 0.533628] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.533637] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4704000-0xf47047ff] [ 0.533683] pci 0000:00:1f.2: PME# supported from D3hot [ 0.533688] pci 0000:00:1f.2: PME# disabled [ 0.533723] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.533750] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.533819] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.533827] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] [ 0.533835] pci 0000:01:00.0: reg 18 32bit mmio: [0xf4000000-0xf400ffff] [ 0.533861] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.533893] pci 0000:01:00.0: supports D1 D2 [ 0.533942] pci 0000:01:00.1: reg 10 32bit mmio: [0xf4010000-0xf4013fff] [ 0.534009] pci 0000:01:00.1: supports D1 D2 [ 0.534085] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.534088] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf40fffff] [ 0.534093] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.534156] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] [ 0.534161] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.534169] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf6000000-0xf7ffffff] [ 0.534246] pci 0000:04:00.0: reg 10 io port: [0x4000-0x40ff] [ 0.534275] pci 0000:04:00.0: reg 18 64bit mmio: [0xf4100000-0xf4100fff] [ 0.534304] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.534367] pci 0000:04:00.0: supports D1 D2 [ 0.534369] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.534376] pci 0000:04:00.0: PME# disabled [ 0.534454] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] [ 0.534459] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4100000-0xf41fffff] [ 0.534598] pci 0000:05:00.0: reg 10 64bit mmio: [0xf4300000-0xf4301fff] [ 0.534732] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.534745] pci 0000:05:00.0: PME# disabled [ 0.534853] pci 0000:00:1c.2: bridge 32bit mmio: [0xf4300000-0xf43fffff] [ 0.534933] pci 0000:06:00.0: reg 10 32bit mmio: [0xf4400000-0xf44003ff] [ 0.534955] pci 0000:06:00.0: reg 18 io port: [0x5000-0x507f] [ 0.534996] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.535129] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] [ 0.535134] pci 0000:00:1c.3: bridge 32bit mmio: [0xf4400000-0xf44fffff] [ 0.535196] pci 0000:0c:04.0: reg 10 32bit mmio: [0xf4204000-0xf4204fff] [ 0.535224] pci 0000:0c:04.0: supports D1 D2 [ 0.535226] pci 0000:0c:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.535232] pci 0000:0c:04.0: PME# disabled [ 0.535282] pci 0000:0c:04.1: reg 10 32bit mmio: [0xf4206000-0xf42067ff] [ 0.535292] pci 0000:0c:04.1: reg 14 32bit mmio: [0xf4200000-0xf4203fff] [ 0.535355] pci 0000:0c:04.1: supports D1 D2 [ 0.535357] pci 0000:0c:04.1: PME# supported from D0 D1 D2 D3hot [ 0.535362] pci 0000:0c:04.1: PME# disabled [ 0.535408] pci 0000:0c:04.2: reg 10 32bit mmio: [0xf4205000-0xf4205fff] [ 0.535473] pci 0000:0c:04.2: supports D1 D2 [ 0.535475] pci 0000:0c:04.2: PME# supported from D0 D1 D2 D3hot [ 0.535481] pci 0000:0c:04.2: PME# disabled [ 0.535526] pci 0000:0c:04.3: reg 10 32bit mmio: [0xf4206800-0xf42068ff] [ 0.535591] pci 0000:0c:04.3: supports D1 D2 [ 0.535593] pci 0000:0c:04.3: PME# supported from D0 D1 D2 D3hot [ 0.535598] pci 0000:0c:04.3: PME# disabled [ 0.535660] pci 0000:00:1e.0: transparent bridge [ 0.535668] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4200000-0xf42fffff] [ 0.535736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.535964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.536055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.536134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.536213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.536291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.536405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.548732] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.548845] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.548954] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.549063] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.549172] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.549281] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.549389] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.549497] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.549627] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.549634] vgaarb: loaded [ 0.549757] SCSI subsystem initialized [ 0.549835] libata version 3.00 loaded. [ 0.549907] usbcore: registered new interface driver usbfs [ 0.549919] usbcore: registered new interface driver hub [ 0.549949] usbcore: registered new device driver usb [ 0.550096] ACPI: WMI: Mapper loaded [ 0.550099] PCI: Using ACPI for IRQ routing [ 0.550360] NetLabel: Initializing [ 0.550362] NetLabel: domain hash size = 128 [ 0.550364] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.550382] NetLabel: unlabeled traffic allowed by default [ 0.550417] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.550422] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 2.206857] Switching to clocksource tsc [ 2.206874] AppArmor: AppArmor Filesystem Enabled [ 2.206874] pnp: PnP ACPI init [ 2.206874] ACPI: bus type pnp registered [ 2.272809] pnp: PnP ACPI: found 10 devices [ 2.272812] ACPI: ACPI bus type pnp unregistered [ 2.272829] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 2.272833] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 2.272836] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 2.272839] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 2.272842] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 2.272845] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 2.272848] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 2.272851] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 2.272860] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 2.272868] system 00:06: ioport range 0x680-0x69f has been reserved [ 2.272871] system 00:06: ioport range 0x800-0x80f has been reserved [ 2.272874] system 00:06: ioport range 0x1000-0x107f has been reserved [ 2.272877] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 2.272881] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 2.272884] system 00:06: ioport range 0xff00-0xff7f has been reserved [ 2.277713] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 2.277717] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 2.277721] pci 0000:00:01.0: MEM window: 0xf4000000-0xf40fffff [ 2.277725] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 2.277730] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 2.277733] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 2.277740] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf3ffffff [ 2.277745] pci 0000:00:1c.0: PREFETCH window: 0x000000f6000000-0x000000f7ffffff [ 2.277754] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 2.277758] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 2.277764] pci 0000:00:1c.1: MEM window: 0xf4100000-0xf41fffff [ 2.277770] pci 0000:00:1c.1: PREFETCH window: 0xc4000000-0xc41fffff [ 2.277778] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 [ 2.277781] pci 0000:00:1c.2: IO window: 0x6000-0x6fff [ 2.277787] pci 0000:00:1c.2: MEM window: 0xf4300000-0xf43fffff [ 2.277792] pci 0000:00:1c.2: PREFETCH window: 0x000000c4200000-0x000000c43fffff [ 2.277801] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 2.277804] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 2.277811] pci 0000:00:1c.3: MEM window: 0xf4400000-0xf44fffff [ 2.277816] pci 0000:00:1c.3: PREFETCH window: 0xc4400000-0xc45fffff [ 2.277826] pci 0000:0c:04.0: CardBus bridge, secondary bus 0000:0d [ 2.277828] pci 0000:0c:04.0: IO window: 0x007000-0x0070ff [ 2.277834] pci 0000:0c:04.0: IO window: 0x007400-0x0074ff [ 2.277839] pci 0000:0c:04.0: PREFETCH window: 0xc0000000-0xc3ffffff [ 2.277844] pci 0000:0c:04.0: MEM window: 0xc8000000-0xcbffffff [ 2.277850] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c [ 2.277854] pci 0000:00:1e.0: IO window: 0x7000-0x7fff [ 2.277860] pci 0000:00:1e.0: MEM window: 0xf4200000-0xf42fffff [ 2.277865] pci 0000:00:1e.0: PREFETCH window: 0xc0000000-0xc3ffffff [ 2.277881] alloc irq_desc for 16 on node -1 [ 2.277883] alloc kstat_irqs on node -1 [ 2.277888] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.277892] pci 0000:00:01.0: setting latency timer to 64 [ 2.277903] alloc irq_desc for 17 on node -1 [ 2.277904] alloc kstat_irqs on node -1 [ 2.277908] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.277913] pci 0000:00:1c.0: setting latency timer to 64 [ 2.277924] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 2.277929] pci 0000:00:1c.1: setting latency timer to 64 [ 2.277939] alloc irq_desc for 18 on node -1 [ 2.277941] alloc kstat_irqs on node -1 [ 2.277944] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.277949] pci 0000:00:1c.2: setting latency timer to 64 [ 2.277960] alloc irq_desc for 19 on node -1 [ 2.277961] alloc kstat_irqs on node -1 [ 2.277964] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.277969] pci 0000:00:1c.3: setting latency timer to 64 [ 2.277978] pci 0000:00:1e.0: setting latency timer to 64 [ 2.277991] pci 0000:0c:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.277998] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 2.278001] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 2.278004] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 2.278006] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf40fffff] [ 2.278009] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 2.278011] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 2.278014] pci_bus 0000:02: resource 1 mem: [0xf0000000-0xf3ffffff] [ 2.278016] pci_bus 0000:02: resource 2 pref mem [0xf6000000-0xf7ffffff] [ 2.278019] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] [ 2.278021] pci_bus 0000:04: resource 1 mem: [0xf4100000-0xf41fffff] [ 2.278023] pci_bus 0000:04: resource 2 pref mem [0xc4000000-0xc41fffff] [ 2.278026] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] [ 2.278028] pci_bus 0000:05: resource 1 mem: [0xf4300000-0xf43fffff] [ 2.278031] pci_bus 0000:05: resource 2 pref mem [0xc4200000-0xc43fffff] [ 2.278033] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff] [ 2.278035] pci_bus 0000:06: resource 1 mem: [0xf4400000-0xf44fffff] [ 2.278038] pci_bus 0000:06: resource 2 pref mem [0xc4400000-0xc45fffff] [ 2.278040] pci_bus 0000:0c: resource 0 io: [0x7000-0x7fff] [ 2.278043] pci_bus 0000:0c: resource 1 mem: [0xf4200000-0xf42fffff] [ 2.278045] pci_bus 0000:0c: resource 2 pref mem [0xc0000000-0xc3ffffff] [ 2.278048] pci_bus 0000:0c: resource 3 io: [0x00-0xffff] [ 2.278050] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff] [ 2.278053] pci_bus 0000:0d: resource 0 io: [0x7000-0x70ff] [ 2.278055] pci_bus 0000:0d: resource 1 io: [0x7400-0x74ff] [ 2.278058] pci_bus 0000:0d: resource 2 pref mem [0xc0000000-0xc3ffffff] [ 2.278060] pci_bus 0000:0d: resource 3 mem: [0xc8000000-0xcbffffff] [ 2.278100] NET: Registered protocol family 2 [ 2.278288] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.279593] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.283794] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.284397] TCP: Hash tables configured (established 524288 bind 65536) [ 2.284400] TCP reno registered [ 2.284527] NET: Registered protocol family 1 [ 2.284708] pci 0000:01:00.0: Boot video device [ 2.284773] Simple Boot Flag at 0x36 set to 0x1 [ 2.284975] Scanning for low memory corruption every 60 seconds [ 2.285132] audit: initializing netlink socket (disabled) [ 2.285144] type=2000 audit(1280547682.280:1): initialized [ 2.295317] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.296758] VFS: Disk quotas dquot_6.5.2 [ 2.296815] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.297438] fuse init (API version 7.13) [ 2.297522] msgmni has been set to 7907 [ 2.297727] alg: No test for stdrng (krng) [ 2.297787] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.297790] io scheduler noop registered [ 2.297792] io scheduler anticipatory registered [ 2.297794] io scheduler deadline registered [ 2.297830] io scheduler cfq registered (default) [ 2.297995] alloc irq_desc for 24 on node -1 [ 2.297997] alloc kstat_irqs on node -1 [ 2.298006] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 2.298013] pcieport 0000:00:01.0: setting latency timer to 64 [ 2.298149] alloc irq_desc for 25 on node -1 [ 2.298151] alloc kstat_irqs on node -1 [ 2.298160] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 2.298172] pcieport 0000:00:1c.0: setting latency timer to 64 [ 2.298329] alloc irq_desc for 26 on node -1 [ 2.298331] alloc kstat_irqs on node -1 [ 2.298340] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 2.298350] pcieport 0000:00:1c.1: setting latency timer to 64 [ 2.298511] alloc irq_desc for 27 on node -1 [ 2.298513] alloc kstat_irqs on node -1 [ 2.298522] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X [ 2.298533] pcieport 0000:00:1c.2: setting latency timer to 64 [ 2.298690] alloc irq_desc for 28 on node -1 [ 2.298692] alloc kstat_irqs on node -1 [ 2.298701] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X [ 2.298712] pcieport 0000:00:1c.3: setting latency timer to 64 [ 2.298817] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.298973] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.299129] ACPI: AC Adapter [ACAD] (on-line) [ 2.299198] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.299241] ACPI: Lid Switch [LID0] [ 2.299284] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.299287] ACPI: Power Button [PWRB] [ 2.299347] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.299349] ACPI: Power Button [PWRF] [ 2.300095] ACPI: SSDT 00000000bfed8029 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 2.300586] ACPI: SSDT 00000000bfed7b19 0048B (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 2.588672] Monitor-Mwait will be used to enter C-1 state [ 2.588703] Monitor-Mwait will be used to enter C-2 state [ 2.588727] Monitor-Mwait will be used to enter C-3 state [ 2.588734] Marking TSC unstable due to TSC halts in idle [ 2.588804] processor LNXCPU:00: registered as cooling_device0 [ 2.589298] ACPI: SSDT 00000000bfed82a3 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 2.589705] ACPI: SSDT 00000000bfed7fa4 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 2.590567] Switching to clocksource hpet [ 2.595893] Freeing initrd memory: 9610k freed [ 2.600985] processor LNXCPU:01: registered as cooling_device1 [ 2.710146] Linux agpgart interface v0.103 [ 2.710201] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.711510] brd: module loaded [ 2.712003] loop: module loaded [ 2.712088] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 2.712188] ata_piix 0000:00:1f.1: version 2.13 [ 2.712202] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.712246] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.712341] scsi0 : ata_piix [ 2.712416] scsi1 : ata_piix [ 2.713051] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 2.713054] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 2.713511] Fixed MDIO Bus: probed [ 2.713546] PPP generic driver version 2.4.2 [ 2.713579] tun: Universal TUN/TAP device driver, 1.6 [ 2.713581] tun: (C) 1999-2004 Max Krasnyansky [ 2.713668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.713688] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.713711] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.713715] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.713745] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.713779] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.717676] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2.717691] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4704800 [ 2.740029] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.740122] usb usb1: configuration #1 chosen from 1 choice [ 2.740150] hub 1-0:1.0: USB hub found [ 2.740158] hub 1-0:1.0: 4 ports detected [ 2.740218] alloc irq_desc for 23 on node -1 [ 2.740220] alloc kstat_irqs on node -1 [ 2.740226] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.740237] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.740241] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.740274] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.740306] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.744196] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.744210] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4704c00 [ 2.760023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.760092] usb usb2: configuration #1 chosen from 1 choice [ 2.760118] hub 2-0:1.0: USB hub found [ 2.760124] hub 2-0:1.0: 6 ports detected [ 2.760185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.760200] uhci_hcd: USB Universal Host Controller Interface driver [ 2.760221] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.760228] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.760231] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.760261] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.760298] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 2.760397] usb usb3: configuration #1 chosen from 1 choice [ 2.760422] hub 3-0:1.0: USB hub found [ 2.760429] hub 3-0:1.0: 2 ports detected [ 2.760486] alloc irq_desc for 21 on node -1 [ 2.760488] alloc kstat_irqs on node -1 [ 2.760492] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.760500] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.760504] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.760538] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.760575] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 2.760664] usb usb4: configuration #1 chosen from 1 choice [ 2.760689] hub 4-0:1.0: USB hub found [ 2.760695] hub 4-0:1.0: 2 ports detected [ 2.760741] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.760748] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.760751] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.760784] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.760812] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 2.760899] usb usb5: configuration #1 chosen from 1 choice [ 2.760927] hub 5-0:1.0: USB hub found [ 2.760933] hub 5-0:1.0: 2 ports detected [ 2.760978] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.760985] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.760988] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.761017] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.761053] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 2.761144] usb usb6: configuration #1 chosen from 1 choice [ 2.761171] hub 6-0:1.0: USB hub found [ 2.761178] hub 6-0:1.0: 2 ports detected [ 2.761225] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.761232] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.761235] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.761266] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.761295] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 2.761385] usb usb7: configuration #1 chosen from 1 choice [ 2.761409] hub 7-0:1.0: USB hub found [ 2.761415] hub 7-0:1.0: 2 ports detected [ 2.761510] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.789910] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.789916] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.790099] mice: PS/2 mouse device common for all mice [ 2.792075] rtc_cmos 00:07: RTC can wake from S4 [ 2.792114] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.792146] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.792267] device-mapper: uevent: version 1.0.3 [ 2.792359] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.792432] device-mapper: multipath: version 1.1.0 loaded [ 2.792435] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.792668] cpuidle: using governor ladder [ 2.792780] cpuidle: using governor menu [ 2.793115] TCP cubic registered [ 2.793241] NET: Registered protocol family 10 [ 2.793683] lo: Disabled Privacy Extensions [ 2.793974] NET: Registered protocol family 17 [ 2.794685] PM: Resume from disk failed. [ 2.794697] registered taskstats version 1 [ 2.795361] Magic number: 2:783:665 [ 2.795473] rtc_cmos 00:07: setting system clock to 2010-07-31 03:41:23 UTC (1280547683) [ 2.795476] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.795478] EDD information not available. [ 2.813600] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.901117] ata1.00: ATAPI: PIONEER DVD-RW DVR-K17A, 3.52, max UDMA/33 [ 2.940506] ata1.00: configured for UDMA/33 [ 2.967338] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17A 3.52 PQ: 0 ANSI: 5 [ 2.998213] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.998218] Uniform CD-ROM driver Revision: 3.20 [ 2.998349] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.998425] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.998544] Freeing unused kernel memory: 880k freed [ 2.998861] Write protecting the kernel read-only data: 7696k [ 3.017764] udev: starting version 151 [ 3.030261] ACPI: Battery Slot [BAT1] (battery present) [ 3.095449] ahci 0000:00:1f.2: version 3.0 [ 3.095474] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.095546] alloc irq_desc for 29 on node -1 [ 3.095549] alloc kstat_irqs on node -1 [ 3.095562] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 3.095633] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 3.095637] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 3.095643] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.099272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.099312] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.099391] r8169 0000:04:00.0: setting latency timer to 64 [ 3.099473] alloc irq_desc for 30 on node -1 [ 3.099476] alloc kstat_irqs on node -1 [ 3.099494] r8169 0000:04:00.0: irq 30 for MSI/MSI-X [ 3.102008] [drm] Initialized drm 1.1.0 20060810 [ 3.130419] scsi2 : ahci [ 3.130958] eth0: RTL8101e at 0xffffc9000064a000, 00:1b:38:3e:8d:4c, XID 14000000 IRQ 30 [ 3.146392] scsi3 : ahci [ 3.150583] scsi4 : ahci [ 3.150746] ata3: SATA max UDMA/133 abar m2048@0xf4704000 port 0xf4704100 irq 29 [ 3.150750] ata4: SATA max UDMA/133 abar m2048@0xf4704000 port 0xf4704180 irq 29 [ 3.150754] ata5: SATA max UDMA/133 abar m2048@0xf4704000 port 0xf4704200 irq 29 [ 3.320101] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 3.340169] acpi device:03: registered as cooling_device2 [ 3.340452] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 3.340505] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.484390] usb 1-3: configuration #1 chosen from 1 choice [ 3.500066] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.500098] ata4: SATA link down (SStatus 0 SControl 300) [ 3.500126] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.501128] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) [ 3.501191] ACPI Warning for \_SB_.PCI0.SATA.PRT2._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) [ 3.501210] ata3.00: _GTF unexpected object type 0x1 [ 3.501229] ata5.00: _GTF unexpected object type 0x1 [ 3.780067] usb 2-6: new high speed USB device using ehci_hcd and address 3 [ 3.873137] ata5.00: ATA-7: TOSHIBA MK2035GSS, DK020M, max UDMA/100 [ 3.873142] ata5.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.874663] ata5.00: _GTF unexpected object type 0x1 [ 3.874949] ata5.00: configured for UDMA/100 [ 3.931006] ata3.00: ATA-7: TOSHIBA MK2035GSS, DK020M, max UDMA/100 [ 3.931011] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.932566] ata3.00: _GTF unexpected object type 0x1 [ 3.932916] ata3.00: configured for UDMA/100 [ 3.933139] usb 2-6: configuration #1 chosen from 1 choice [ 3.939229] Initializing USB Mass Storage driver... [ 3.939377] scsi5 : SCSI emulation for USB Mass Storage devices [ 3.939496] usbcore: registered new interface driver usb-storage [ 3.939499] USB Mass Storage support registered. [ 3.939504] usb-storage: device found at 3 [ 3.939511] usb-storage: waiting for device to settle before scanning [ 3.950179] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5 [ 3.950374] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.950409] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 3.950490] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5 [ 3.950617] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.950693] sd 4:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 3.950715] sd 2:0:0:0: [sda] Write Protect is off [ 3.950718] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.950743] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.950747] sd 4:0:0:0: [sdb] Write Protect is off [ 3.950750] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.950775] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.950909] sda: [ 3.950943] sdb: [ 4.000430] sdb1 sdb3 < [ 4.000497] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.015677] sdb5 sdb6 > [ 4.044392] sd 4:0:0:0: [sdb] Attached SCSI disk [ 4.046939] ohci1394 0000:0c:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.065038] [drm] radeon defaulting to kernel modesetting. [ 4.065041] [drm] radeon kernel modesetting enabled. [ 4.065110] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 4.065120] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 4.065131] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.065137] radeon 0000:01:00.0: setting latency timer to 64 [ 4.067688] [drm] radeon: Initializing kernel modesetting. [ 4.072536] [drm] register mmio base: 0xF4000000 [ 4.072539] [drm] register mmio size: 65536 [ 4.072622] ATOM BIOS: ISRAA [ 4.072635] [drm] Clocks initialized ! [ 4.072655] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 4.072658] [drm] Detected VRAM RAM=256M, BAR=256M [ 4.072660] [drm] RAM width 128bits DDR [ 4.072723] [TTM] Zone kernel: Available graphics memory: 2029658 kiB. [ 4.072743] [drm] radeon: 256M of VRAM memory ready [ 4.072745] [drm] radeon: 512M of GTT memory ready. [ 4.072803] alloc irq_desc for 31 on node -1 [ 4.072805] alloc kstat_irqs on node -1 [ 4.072820] radeon 0000:01:00.0: irq 31 for MSI/MSI-X [ 4.072828] [drm] radeon: using MSI. [ 4.072864] [drm] radeon: irq initialized. [ 4.072867] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 4.073721] [drm] Loading RV630 Microcode [ 4.073728] platform radeon_cp.0: firmware: requesting radeon/RV630_pfp.bin [ 4.075755] platform radeon_cp.0: firmware: requesting radeon/RV630_me.bin [ 4.079815] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin [ 4.110085] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4206000-f42067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.115417] [drm] ring test succeeded in 1 usecs [ 4.115519] [drm] radeon: ib pool ready. [ 4.115594] [drm] ib test succeeded in 0 usecs [ 4.115596] [drm] Enabling audio support [ 4.115735] [drm] Default TV standard: PAL [ 4.115897] [drm] Radeon Display Connectors [ 4.115899] [drm] Connector 0: [ 4.115900] [drm] VGA [ 4.115903] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 4.115904] [drm] Encoders: [ 4.115906] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.115908] [drm] Connector 1: [ 4.115909] [drm] HDMI-A [ 4.115911] [drm] HPD1 [ 4.115913] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 4.115914] [drm] Encoders: [ 4.115916] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 4.115917] [drm] Connector 2: [ 4.115919] [drm] DIN [ 4.115920] [drm] Encoders: [ 4.115921] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 4.115923] [drm] Connector 3: [ 4.115924] [drm] LVDS [ 4.115926] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc [ 4.115928] [drm] Encoders: [ 4.115930] [drm] LCD1: INTERNAL_LVTM1 [ 4.210046] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 4.348239] [drm] fb mappable at 0xD0141000 [ 4.348242] [drm] vram apper at 0xD0000000 [ 4.348244] [drm] size 5299200 [ 4.348245] [drm] fb depth is 24 [ 4.348246] [drm] pitch is 5888 [ 4.348346] fb0: radeondrmfb frame buffer device [ 4.348348] registered panic notifier [ 4.348353] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 4.350052] vga16fb: initializing [ 4.350056] vga16fb: mapped to 0xffff8800000a0000 [ 4.350059] vga16fb: not registering due to another framebuffer present [ 4.414708] Console: switching to colour frame buffer device 128x48 [ 4.438763] usb 4-2: configuration #1 chosen from 1 choice [ 4.720052] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 4.836185] xor: automatically using best checksumming function: generic_sse [ 4.880063] generic_sse: 7962.400 MB/sec [ 4.880066] xor: using function: generic_sse (7962.400 MB/sec) [ 4.882479] device-mapper: dm-raid45: initialized v0.2594b [ 4.894227] usb 6-1: configuration #1 chosen from 1 choice [ 4.906594] usbcore: registered new interface driver hiddev [ 4.919534] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input6 [ 4.919668] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-1/input0 [ 4.919691] usbcore: registered new interface driver usbhid [ 4.919694] usbhid: v2.6:USB HID core driver [ 5.306135] kjournald starting. Commit interval 5 seconds [ 5.306149] EXT3-fs: mounted filesystem with ordered data mode. [ 5.426324] kjournald starting. Commit interval 5 seconds [ 5.426338] EXT3-fs: mounted filesystem with ordered data mode. [ 5.430261] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f77ae40a232] [ 8.930381] usb-storage: device scan complete [ 8.930948] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2 [ 8.931663] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 8.932279] sd 5:0:0:0: [sdc] 15636304 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 8.932802] sd 5:0:0:0: [sdc] Write Protect is off [ 8.932808] sd 5:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 8.932812] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 8.935159] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 8.935165] sdc: sdc1 [ 8.937023] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 8.937026] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 9.587201] aufs 2-standalone.tree-20091207 [ 9.599393] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 14.019368] kjournald starting. Commit interval 5 seconds [ 14.019418] EXT3 FS on loop1, internal journal [ 14.019422] EXT3-fs: mounted filesystem with ordered data mode. [ 14.025960] aufs test_add:243:exe[1031]: uid/gid/perm //filesystem.squashfs 0/0/0755, 1000/1000/0755 [ 47.929660] udev: starting version 151 [ 48.413748] cfg80211: Calling CRDA to update world regulatory domain [ 48.464707] sdhci: Secure Digital Host Controller Interface driver [ 48.464710] sdhci: Copyright(c) Pierre Ossman [ 48.496989] Linux video capture interface: v2.00 [ 48.556665] sdhci-pci 0000:0c:04.3: SDHCI controller found [104c:803c] (rev 0) [ 48.556687] sdhci-pci 0000:0c:04.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 48.556781] Registered led device: mmc0:: [ 48.556818] mmc0: SDHCI controller on PCI [0000:0c:04.3] using DMA [ 48.571806] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 48.575709] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7 [ 48.575764] usbcore: registered new interface driver uvcvideo [ 48.575767] USB Video Class driver (v0.1.0) [ 48.592864] yenta_cardbus 0000:0c:04.0: CardBus bridge found [1179:ff00] [ 48.592886] yenta_cardbus 0000:0c:04.0: Enabling burst memory read transactions [ 48.592893] yenta_cardbus 0000:0c:04.0: Using CSCINT to route CSC interrupts to PCI [ 48.592895] yenta_cardbus 0000:0c:04.0: Routing CardBus interrupts to PCI [ 48.592901] yenta_cardbus 0000:0c:04.0: TI: mfunc 0x10a01b22, devctl 0x64 [ 48.676700] r8169: eth0: link down [ 48.677240] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 48.705654] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 48.705657] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 48.705796] iwlagn 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 48.705824] iwlagn 0000:05:00.0: setting latency timer to 64 [ 48.705918] iwlagn 0000:05:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 48.769100] cfg80211: World regulatory domain updated: [ 48.769104] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 48.769107] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 48.769110] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 48.769112] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 48.769115] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 48.769118] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 48.776026] iwlagn 0000:05:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 48.776100] alloc irq_desc for 32 on node -1 [ 48.776102] alloc kstat_irqs on node -1 [ 48.776124] iwlagn 0000:05:00.0: irq 32 for MSI/MSI-X [ 48.844719] yenta_cardbus 0000:0c:04.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 48.844723] yenta_cardbus 0000:0c:04.0: Socket status: 30000006 [ 48.844729] pci_bus 0000:0c: Raising subordinate bus# of parent bus (#0c) from #0d to #10 [ 48.844739] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff [ 48.844743] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf42fffff [ 48.844746] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge Memory window: 0xc0000000 - 0xc3ffffff [ 48.847563] tifm_7xx1 0000:0c:04.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 48.879515] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 48.940691] iwlagn 0000:05:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 49.010873] iwlagn 0000:05:00.0: loaded firmware version 228.61.2.24 [ 49.016367] alloc irq_desc for 22 on node -1 [ 49.016370] alloc kstat_irqs on node -1 [ 49.016377] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 49.016610] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 49.231703] Registered led device: iwl-phy0::radio [ 49.231948] Registered led device: iwl-phy0::assoc [ 49.232211] Registered led device: iwl-phy0::RX [ 49.233169] Registered led device: iwl-phy0::TX [ 49.241651] hda_codec: ALC268: BIOS auto-probing. [ 49.243003] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 49.257724] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 49.257783] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 49.287378] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 49.441402] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000 [ 49.562900] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 49.624730] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 49.919700] lp: driver loaded but no devices found [ 49.950733] ppdev: user-space parallel port driver [ 50.020983] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 56.910422] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 189.025854] wlan0: deauthenticating from 00:18:84:88:1b:b8 by local choice (reason=3) [ 189.033691] wlan0: direct probe to AP 00:13:49:a0:b7:4e (try 1) [ 189.037273] wlan0: direct probe responded [ 189.037284] wlan0: authenticate with AP 00:13:49:a0:b7:4e (try 1) [ 189.038647] wlan0: authenticated [ 189.038694] wlan0: associate with AP 00:13:49:a0:b7:4e (try 1) [ 189.041065] wlan0: RX AssocResp from 00:13:49:a0:b7:4e (capab=0x431 status=0 aid=1) [ 189.041072] wlan0: associated [ 189.062716] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 199.660148] wlan0: no IPv6 routers present [ 248.720760] CE: hpet increasing min_delta_ns to 15000 nsec [ 542.680282] wlan0: deauthenticating from 00:13:49:a0:b7:4e by local choice (reason=3) [ 542.694323] wlan0: direct probe to AP 00:13:49:a0:b7:4e (try 1) [ 542.694363] wlan0: deauthenticating from 00:13:49:a0:b7:4e by local choice (reason=3) [ 542.701939] wlan0: direct probe to AP 00:18:84:88:1b:b8 (try 1) [ 542.703824] wlan0: direct probe responded [ 542.703833] wlan0: authenticate with AP 00:18:84:88:1b:b8 (try 1) [ 542.706311] wlan0: authenticated [ 542.791440] wlan0: associate with AP 00:18:84:88:1b:b8 (try 1) [ 542.793174] wlan0: RX AssocResp from 00:18:84:88:1b:b8 (capab=0xc11 status=0 aid=1) [ 542.793181] wlan0: associated [ 542.813836] cfg80211: Calling CRDA for country: ES [ 542.818842] cfg80211: Received country IE: [ 542.818850] cfg80211: Regulatory domain: ES [ 542.818854] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 542.818861] (2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 542.818866] cfg80211: CRDA thinks this should applied: [ 542.818870] cfg80211: Regulatory domain: ES [ 542.818874] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 542.818881] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 542.818887] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 542.818893] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 542.818899] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 542.818903] cfg80211: We intersect both of these and get: [ 542.818907] cfg80211: Regulatory domain: 98 [ 542.818911] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 542.818917] (2402000 KHz - 2477000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 542.818928] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 542.818934] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [ 542.818941] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [ 542.818947] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [ 542.818953] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [ 542.818960] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [ 542.818966] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [ 542.818972] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [ 542.818979] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [ 542.818985] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [ 542.818991] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [ 542.818998] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [ 542.819004] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [ 542.819010] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [ 542.819017] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [ 542.819023] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [ 542.819030] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [ 542.819036] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [ 542.819042] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [ 542.819049] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [ 542.819058] cfg80211: Current regulatory domain updated by AP to: ES [ 542.819062] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 542.819070] (2402000 KHz - 2477000 KHz @ 40000 KHz), (N/A, 2000 mBm)