X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu
Current Operating System: Linux ubuntu 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
Build Date: 23 April 2010  05:11:46PM
xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <bryce@ubuntu.com>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 30 10:05:13 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "amdcccle Layout"
(**) |-->Screen "amdcccle-Screen[6]-0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "amdcccle-Device[6]-0"
(==) No monitor specified for screen "amdcccle-Screen[6]-0".
	Using a default monitor configuration.
(**) |-->Screen "amdcccle-Screen[6]-1" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "amdcccle-Device[6]-1"
(==) No monitor specified for screen "amdcccle-Screen[6]-1".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7ca300
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 8

(--) PCI:*(0:6:0:0) 1002:9509:161f:207a ATI Technologies Inc rev 0, Mem @ 0xd0000000/268435456, 0xf8100000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.11
	Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.11
(II) ATI Proprietary Linux Driver Version Identifier:8.72.11
(II) ATI Proprietary Linux Driver Release Identifier: 8.723.1                              
(II) ATI Proprietary Linux Driver Build Date: Apr  8 2010 21:40:58
(II) Primary Device is: PCI 06@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x9509) found
(--) Chipset Supported AMD Graphics Processor (0x9509) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@6:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x1cc7510
(II) fglrx(1): pEnt->device->identifier=0x1cc7510
(II) fglrx(0): === [atiddxPreInit] === begin
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:6:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 12, (OK)
ukiOpenByBusid: ukiOpenMinor returns 12
ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3870 X2" (Chipset = 0x9509)
(--) fglrx(0): (PciSubVendor = 0x161f, PciSubDevice = 0x207a)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xf8100000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 6:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 35.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: LGD  Model: 3901  Serial#: 0
(II) fglrx(0): Year: 2008  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 37  vert.: 23
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.614 redY: 0.353   greenX: 0.321 greenY: 0.561
(II) fglrx(0): blueX: 0.152 blueY: 0.124   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 154.0 MHz   Image Size:  367 x 230 mm
(II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) fglrx(0): v_active: 1200  v_sync: 1203  v_sync_end 1209 v_blanking: 1235 v_border: 0
(II) fglrx(0):  LG Display
(II) fglrx(0):  LP171WU3-TLB3
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff0030e4013900000000
(II) fglrx(0): 	00120103802517780a56359d5a528f27
(II) fglrx(0): 	1f505400000001010101010101010101
(II) fglrx(0): 	010101010101283c80a070b023403020
(II) fglrx(0): 	36006fe6100000190000000000000000
(II) fglrx(0): 	00000000000000000000000000fe004c
(II) fglrx(0): 	4720446973706c61790a2020000000fe
(II) fglrx(0): 	004c503137315755332d544c423300d7
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(WW) EDID preferred timing clock 162.00MHz exceeds claimed max 160MHz, fixing
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: DEL  Model: a007  Serial#: 809913932
(II) fglrx(0): Year: 2003  Week: 50
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
(II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 31
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.638 redY: 0.342   greenX: 0.293 greenY: 0.608
(II) fglrx(0): blueX: 0.146 blueY: 0.067   whiteX: 0.312 whiteY: 0.328
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) fglrx(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 162.0 MHz   Image Size:  367 x 275 mm
(II) fglrx(0): h_active: 1600  h_sync: 1664  h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) fglrx(0): v_active: 1200  v_sync: 1201  v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) fglrx(0): Serial No: C08813CC0FNL
(II) fglrx(0): Monitor name: DELL 2001FP
(II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 162 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff0010ac07a04c4e4630
(II) fglrx(0): 	320d01030e291f78ee6390a3574b9b25
(II) fglrx(0): 	115054a54b008180a940714f01010101
(II) fglrx(0): 	010101010101483f403062b0324040c0
(II) fglrx(0): 	13006f131100001e000000ff00433038
(II) fglrx(0): 	383133434330464e4c20000000fc0044
(II) fglrx(0): 	454c4c203230303146500a20000000fd
(II) fglrx(0): 	00384c1f5010000a202020202020007e
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output LVDS using monitor section 0-LVDS
(**) fglrx(0): Option "PreferredMode" "1400x1050"
(**) fglrx(0): Option "Position" "0 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output LVDS connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output CRT1 connected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output LVDS using initial mode 1400x1050
(II) fglrx(0): Output CRT1 using initial mode 1400x1050
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Mobility Radeon HD 3870 X2 has 2 configurable heads and 2 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(1): === [atiddxPreInit] === begin
(**) fglrx(1): Depth 24, (--) framebuffer bpp 32
(II) fglrx(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(1): Default visual is TrueColor
(==) fglrx(1): RGB weight 888
(II) fglrx(1): Using 8 bits per RGB 
(==) fglrx(1): Buffer Tiling is ON (copy from primary)
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3870 X2" (Chipset = 0x9509)
(--) fglrx(0): (PciSubVendor = 0x161f, PciSubDevice = 0x207a)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/lib/xorg/modules/libfb.so
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(1): Output LVDS has no monitor section
(II) fglrx(1): Output DFP1 has no monitor section
(II) fglrx(1): Output CRT1 using monitor section 0-CRT1
(**) fglrx(1): Option "PreferredMode" "1600x1200"
(**) fglrx(1): Option "Position" "0 0"
(**) fglrx(1): Option "Disable" "false"
(**) fglrx(1): Option "Rotate" "normal"
(**) fglrx(1): Option "TargetRefresh" "60"
(II) fglrx(1): Output LVDS disconnected
(II) fglrx(1): Output DFP1 disconnected
(II) fglrx(1): Output CRT1 connected
(II) fglrx(1): Using user preference for initial modes
(II) fglrx(1): Output CRT1 using initial mode 1600x1200
(II) fglrx(1): DPI set to (96, 96)
(WW) fglrx(0): Unable to register ADL handler for 0x00110000
(WW) fglrx(0): Unable to register ADL handler for 0x00120000
(WW) fglrx(0): Unable to register ADL handler for 0x00130000
(WW) fglrx(0): Unable to register ADL handler for 0x00150000
(II) fglrx(1): Adapter ATI Mobility Radeon HD 3870 X2 has 2 configurable heads and 2 displays connected.
(==) fglrx(1):  PseudoColor visuals disabled
(==) fglrx(1): NoAccel = NO (copy from primary screen)
(==) fglrx(1): bNoDRI = NO (copy from primary screen)
(==) fglrx(1): UseFastTLS=0
(==) fglrx(1): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:6:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 14, (OK)
ukiOpenByBusid: ukiOpenMinor returns 14
ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:6:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x7a000
(II) fglrx(0): [uki] mapped SAREA 0x7a000 to 0x7fc279647000
(II) fglrx(0): [uki] framebuffer handle = 0x7b000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.72.11
(II) fglrx(0):     Date: Apr  8 2010
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.32-21-generic
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [uki] register handle = 0x0007c000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01028000
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,3008)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1408) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1408 x 1600
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.2.1
	ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid Horizontal and Vertical Lines
	Driver provided ScreenToScreenBitBlt replacement
	Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): User Preference Output LVDS using refresh rate 60.0 Hz.
(--) RandR disabled
(II) fglrx(1): doing swlDriScreenInit
(II) fglrx(1): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:6:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 15, (OK)
ukiOpenByBusid: ukiOpenMinor returns 15
ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
(II) fglrx(1): [uki] DRM interface version 1.0
(II) fglrx(1): [uki] created "fglrx" driver at busid "PCI:6:0:0"
(II) fglrx(1): [uki] added 8192 byte SAREA at 0x7a000
(II) fglrx(1): [uki] mapped SAREA 0x7a000 to 0x7fc272ee5000
(II) fglrx(1): [uki] framebuffer handle = 0x7b000
(II) fglrx(1): [uki] added 1 reserved context for kernel
(II) fglrx(1): swlDriScreenInit done
(II) fglrx(1): Display width adjusted to to 1664 due to alignment constraints
(II) fglrx(1): DRI initialization successfull!
(II) fglrx(1): FBADPhys: 0xc1038000 FBMappedSize: 0x00c64000
(II) fglrx(1): FBMM initialized for area (0,0)-(1664,1952)
(II) fglrx(1): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
(II) fglrx(1): Largest offscreen area available: 1664 x 288
(==) fglrx(1): Backing store disabled
(==) fglrx(1): DPMS enabled
(**) fglrx(1): Textured Video is enabled.
(II) fglrx(1): GLESX enableFlags = 94
(II) fglrx(1): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid Horizontal and Vertical Lines
	Driver provided ScreenToScreenBitBlt replacement
	Driver provided FillSolidRects replacement
(II) fglrx(1): GLESX is enabled
(II) fglrx(1): Enable composite support successfully
(II) fglrx(1): X context handle = 0x2
(II) fglrx(1): [DRI] installation complete
(==) fglrx(1): Silken mouse enabled
(==) fglrx(1): Using HW cursor of display infrastructure!
(II) fglrx(1): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(1): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(1): 'eDP LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(1): User Preference Output CRT1 using refresh rate 60.0 Hz.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:6:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 16, (OK)
ukiOpenByBusid: ukiOpenMinor returns 16
ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
(II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:6:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 18, (OK)
ukiOpenByBusid: ukiOpenMinor returns 18
ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
(II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 1
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 370 x 277
(II) fglrx(1): Setting screen physical size to 423 x 317
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) XKB: reuse xkmfile /var/lib/xkb/server-2B4266AA55228AE7D9557A18F1965DBA19850816.xkm
(II) config/udev: Adding input device Video Bus (/dev/input/event8)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/event6)
(**) Logitech G9 Laser Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech G9 Laser Mouse: always reports core events
(**) Logitech G9 Laser Mouse: Device: "/dev/input/event6"
(II) Logitech G9 Laser Mouse: Found 20 mouse buttons
(II) Logitech G9 Laser Mouse: Found scroll wheel(s)
(II) Logitech G9 Laser Mouse: Found relative axes
(II) Logitech G9 Laser Mouse: Found x and y relative axes
(II) Logitech G9 Laser Mouse: Configuring as mouse
(**) Logitech G9 Laser Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech G9 Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech G9 Laser Mouse" (type: MOUSE)
(II) Logitech G9 Laser Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/event7)
(**) Logitech G9 Laser Mouse: Applying InputClass "evdev keyboard catchall"
(**) Logitech G9 Laser Mouse: always reports core events
(**) Logitech G9 Laser Mouse: Device: "/dev/input/event7"
(II) Logitech G9 Laser Mouse: Found 1 mouse buttons
(II) Logitech G9 Laser Mouse: Found scroll wheel(s)
(II) Logitech G9 Laser Mouse: Found relative axes
(II) Logitech G9 Laser Mouse: Found absolute axes
(II) Logitech G9 Laser Mouse: Found keys
(II) Logitech G9 Laser Mouse: Configuring as mouse
(II) Logitech G9 Laser Mouse: Configuring as keyboard
(**) Logitech G9 Laser Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech G9 Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech G9 Laser Mouse" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(EE) Logitech G9 Laser Mouse: failed to initialize for relative axes.
(II) Logitech G9 Laser Mouse: initialized for absolute axes.
(II) config/udev: Adding input device 2.0M Pixel Camera (/dev/input/event9)
(**) 2.0M Pixel Camera: Applying InputClass "evdev keyboard catchall"
(**) 2.0M Pixel Camera: always reports core events
(**) 2.0M Pixel Camera: Device: "/dev/input/event9"
(II) 2.0M Pixel Camera: Found keys
(II) 2.0M Pixel Camera: Configuring as keyboard
(II) XINPUT: Adding extended input device "2.0M Pixel Camera" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event11"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event4)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) fglrx(1): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments