X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu
Current Operating System: Linux ubuntu 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
Build Date: 23 April 2010  05:11:46PM
xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <bryce@ubuntu.com>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 30 09:52:18 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "amdcccle Layout"
(**) |-->Screen "amdcccle-Screen[6]-0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "amdcccle-Device[6]-0"
(==) No monitor specified for screen "amdcccle-Screen[6]-0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(--) using VT number 8

(--) PCI:*(0:6:0:0) 1002:9509:161f:207a ATI Technologies Inc rev 0, Mem @ 0xd0000000/268435456, 0xf8100000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.5.0, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.11
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.11
(II) ATI Proprietary Linux Driver Version Identifier:8.72.11
(II) ATI Proprietary Linux Driver Release Identifier: 8.723.1                              
(II) ATI Proprietary Linux Driver Build Date: Apr  8 2010 21:40:58
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x9509) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@6:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0xbbf470
(II) fglrx(0): === [atiddxPreInit] === begin
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3870 X2" (Chipset = 0x9509)
(--) fglrx(0): (PciSubVendor = 0x161f, PciSubDevice = 0x207a)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xf8100000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 6:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 35.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: LGD  Model: 3901  Serial#: 0
(II) fglrx(0): Year: 2008  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 37  vert.: 23
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.614 redY: 0.353   greenX: 0.321 greenY: 0.561
(II) fglrx(0): blueX: 0.152 blueY: 0.124   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 154.0 MHz   Image Size:  367 x 230 mm
(II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) fglrx(0): v_active: 1200  v_sync: 1203  v_sync_end 1209 v_blanking: 1235 v_border: 0
(II) fglrx(0):  LG Display
(II) fglrx(0):  LP171WU3-TLB3
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff0030e4013900000000
(II) fglrx(0): 	00120103802517780a56359d5a528f27
(II) fglrx(0): 	1f505400000001010101010101010101
(II) fglrx(0): 	010101010101283c80a070b023403020
(II) fglrx(0): 	36006fe6100000190000000000000000
(II) fglrx(0): 	00000000000000000000000000fe004c
(II) fglrx(0): 	4720446973706c61790a2020000000fe
(II) fglrx(0): 	004c503137315755332d544c423300d7
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(WW) EDID preferred timing clock 162.00MHz exceeds claimed max 160MHz, fixing
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: DEL  Model: a007  Serial#: 809913932
(II) fglrx(0): Year: 2003  Week: 50
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
(II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 31
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.638 redY: 0.342   greenX: 0.293 greenY: 0.608
(II) fglrx(0): blueX: 0.146 blueY: 0.067   whiteX: 0.312 whiteY: 0.328
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) fglrx(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 162.0 MHz   Image Size:  367 x 275 mm
(II) fglrx(0): h_active: 1600  h_sync: 1664  h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) fglrx(0): v_active: 1200  v_sync: 1201  v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) fglrx(0): Serial No: C08813CC0FNL
(II) fglrx(0): Monitor name: DELL 2001FP
(II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 162 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff0010ac07a04c4e4630
(II) fglrx(0): 	320d01030e291f78ee6390a3574b9b25
(II) fglrx(0): 	115054a54b008180a940714f01010101
(II) fglrx(0): 	010101010101483f403062b0324040c0
(II) fglrx(0): 	13006f131100001e000000ff00433038
(II) fglrx(0): 	383133434330464e4c20000000fc0044
(II) fglrx(0): 	454c4c203230303146500a20000000fd
(II) fglrx(0): 	00384c1f5010000a202020202020007e
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output LVDS using monitor section 0-LVDS
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output CRT1 using monitor section 0-CRT1
(II) fglrx(0): Output LVDS connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output CRT1 connected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output LVDS using initial mode 1400x1050
(II) fglrx(0): Output CRT1 using initial mode 1400x1050
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Mobility Radeon HD 3870 X2 has 2 configurable heads and 2 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:6:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x64000
(II) fglrx(0): [uki] mapped SAREA 0x64000 to 0x7f28d7df5000
(II) fglrx(0): [uki] framebuffer handle = 0x65000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.72.11
(II) fglrx(0):     Date: Apr  8 2010
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.32-21-generic
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [uki] register handle = 0x00066000
(II) fglrx(0): Display width adjusted to to 3072 due to alignment constraints
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x02580000
(II) fglrx(0): FBMM initialized for area (0,0)-(3072,3200)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(3072,3072) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 3072 x 128
(==) fglrx(0): Backing store disabled
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.2.1
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid Horizontal and Vertical Lines
	Driver provided ScreenToScreenBitBlt replacement
	Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): User Preference Output LVDS using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output CRT1 using refresh rate 60.0 Hz.
(--) RandR disabled
(II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 740 x 277
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.3.2
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) XKB: reuse xkmfile /var/lib/xkb/server-2B4266AA55228AE7D9557A18F1965DBA19850816.xkm
(II) config/udev: Adding input device Video Bus (/dev/input/event7)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(II) config/udev: Adding input device 2.0M Pixel Camera (/dev/input/event6)
(**) 2.0M Pixel Camera: Applying InputClass "evdev keyboard catchall"
(**) 2.0M Pixel Camera: always reports core events
(**) 2.0M Pixel Camera: Device: "/dev/input/event6"
(II) 2.0M Pixel Camera: Found keys
(II) 2.0M Pixel Camera: Configuring as keyboard
(II) XINPUT: Adding extended input device "2.0M Pixel Camera" (type: KEYBOARD)
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.2.2
(II) Synaptics touchpad driver version 1.2.2
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event4)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/event10)
(**) Logitech G9 Laser Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech G9 Laser Mouse: always reports core events
(**) Logitech G9 Laser Mouse: Device: "/dev/input/event10"
(II) Logitech G9 Laser Mouse: Found 20 mouse buttons
(II) Logitech G9 Laser Mouse: Found scroll wheel(s)
(II) Logitech G9 Laser Mouse: Found relative axes
(II) Logitech G9 Laser Mouse: Found x and y relative axes
(II) Logitech G9 Laser Mouse: Configuring as mouse
(**) Logitech G9 Laser Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech G9 Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech G9 Laser Mouse" (type: MOUSE)
(II) Logitech G9 Laser Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/event11)
(**) Logitech G9 Laser Mouse: Applying InputClass "evdev keyboard catchall"
(**) Logitech G9 Laser Mouse: always reports core events
(**) Logitech G9 Laser Mouse: Device: "/dev/input/event11"
(II) Logitech G9 Laser Mouse: Found 1 mouse buttons
(II) Logitech G9 Laser Mouse: Found scroll wheel(s)
(II) Logitech G9 Laser Mouse: Found relative axes
(II) Logitech G9 Laser Mouse: Found absolute axes
(II) Logitech G9 Laser Mouse: Found keys
(II) Logitech G9 Laser Mouse: Configuring as mouse
(II) Logitech G9 Laser Mouse: Configuring as keyboard
(**) Logitech G9 Laser Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech G9 Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech G9 Laser Mouse" (type: KEYBOARD)
(EE) Logitech G9 Laser Mouse: failed to initialize for relative axes.
(II) Logitech G9 Laser Mouse: initialized for absolute axes.
(II) fglrx(0): Preparing normal LeaveVT...
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) fglrx(0): Backup framebuffer data.
(II) fglrx(0): Backup complete.
(II) fglrx(0): Preparing normal EnterVT...
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): User Preference Output LVDS using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output CRT1 using refresh rate 60.0 Hz.
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) 2.0M Pixel Camera: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) fglrx(0): Hot-plug event occurs on device: 6:0:0 
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech G9 Laser Mouse: Device reopened after 1 attempts.
(II) Logitech G9 Laser Mouse: Device reopened after 1 attempts.
(II) fglrx(0): Preparing normal LeaveVT...
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) fglrx(0): Backup framebuffer data.
(II) fglrx(0): Backup complete.
(II) fglrx(0): Preparing normal EnterVT...
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): User Preference Output LVDS using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output CRT1 using refresh rate 60.0 Hz.
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) 2.0M Pixel Camera: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) fglrx(0): Hot-plug event occurs on device: 6:0:0 
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech G9 Laser Mouse: Device reopened after 1 attempts.
(II) Logitech G9 Laser Mouse: Device reopened after 1 attempts.
(II) fglrx(0): Preparing normal LeaveVT...
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) fglrx(0): Backup framebuffer data.
(II) fglrx(0): Backup complete.
(II) fglrx(0): Preparing normal EnterVT...
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): User Preference Output LVDS using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output CRT1 using refresh rate 60.0 Hz.
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) 2.0M Pixel Camera: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) fglrx(0): Hot-plug event occurs on device: 6:0:0 
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech G9 Laser Mouse: Device reopened after 1 attempts.
(II) Logitech G9 Laser Mouse: Device reopened after 1 attempts.
(II) Power Button: Close
(II) Video Bus: Close