Dumping 145 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
  info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
  info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
  info.capabilities = {'cpufreq_control'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  power_management.acpi.linux.version = '20080926'  (string)
  power_management.can_hibernate = true  (bool)
  power_management.can_suspend = true  (bool)
  power_management.can_suspend_hybrid = false  (bool)
  power_management.is_powersave_set = false  (bool)
  power_management.quirk.dpms_on = true  (bool)
  power_management.quirk.dpms_suspend = true  (bool)
  power_management.quirk.vbe_post = true  (bool)
  power_management.quirk.vbemode_restore = true  (bool)
  power_management.quirk.vbestate_restore = true  (bool)
  power_management.quirk.vga_mode_3 = true  (bool)
  power_management.type = 'acpi'  (string)
  system.board.product = '0P132H'  (string)
  system.board.serial = '.BF76PH1.CN4864389D0981.'  (string)
  system.board.vendor = 'Dell Inc.'  (string)
  system.board.version = 'A07'  (string)
  system.chassis.manufacturer = 'Dell Inc.'  (string)
  system.chassis.type = 'Portable'  (string)
  system.firmware.release_date = '12/03/2008'  (string)
  system.firmware.vendor = 'Dell Inc.'  (string)
  system.firmware.version = 'A07'  (string)
  system.formfactor = 'laptop'  (string)
  system.hardware.primary_video.product = 38340  (0x95c4)  (int)
  system.hardware.primary_video.vendor = 4098  (0x1002)  (int)
  system.hardware.product = 'Studio 1537'  (string)
  system.hardware.serial = 'BF76PH1'  (string)
  system.hardware.uuid = '44454C4C-4600-1037-8036-C2C04F504831'  (string)
  system.hardware.vendor = 'Dell Inc.'  (string)
  system.hardware.version = 'A07'  (string)
  system.kernel.machine = 'x86_64'  (string)
  system.kernel.name = 'Linux'  (string)
  system.kernel.version = '2.6.28-11-generic'  (string)
  system.kernel.version.major = 2  (0x2)  (int)
  system.kernel.version.micro = 28  (0x1c)  (int)
  system.kernel.version.minor = 6  (0x6)  (int)

udi = '/org/freedesktop/Hal/devices/net_0a_6e_c1_61_e6_47'
  info.capabilities = {'net', 'net.bridge'} (string list)
  info.category = 'net.bridge'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Bridge Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_0a_6e_c1_61_e6_47'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/pan0'  (string)
  net.address = '0a:6e:c1:61:e6:47'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.bridge.mac_address = 11470807098951  (0xa6ec161e647)  (uint64)
  net.interface = 'pan0'  (string)
  net.linux.ifindex = 5  (0x5)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'
  button.has_state = true  (bool)
  button.state.value = false  (bool)
  button.type = 'lid'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'input.switch', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Lid Switch'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'  (string)
  input.device = '/dev/input/event3'  (string)
  input.product = 'Lid Switch'  (string)
  linux.device_file = '/dev/input/event3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event3'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Video Bus'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)
  input.device = '/dev/input/event9'  (string)
  input.product = 'Video Bus'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event9'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input9/event9'  (string)
  lirc.input.is_remote = false  (bool)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  access_control.file = '/dev/snd/timer'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/timer'  (string)
  alsa.type = 'timer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Timer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'  (string)
  linux.device_file = '/dev/snd/timer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/timer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
  access_control.file = '/dev/input/event4'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Macintosh mouse button emulation'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'  (string)
  input.device = '/dev/input/event4'  (string)
  input.product = 'Macintosh mouse button emulation'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input4/event4'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU0'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = true  (bool)
  processor.number = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU1'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = true  (bool)
  processor.number = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
  info.capabilities = {'net', 'net.loopback'} (string list)
  info.category = 'net.loopback'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Loopback device Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/lo'  (string)
  net.address = '00:00:00:00:00:00'  (string)
  net.arp_proto_hw_id = 772  (0x304)  (int)
  net.interface = 'lo'  (string)
  net.linux.ifindex = 1  (0x1)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
  button.has_state = false  (bool)
  button.type = 'sleep'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Sleep Button (CM)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'  (string)
  input.device = '/dev/input/event2'  (string)
  input.product = 'Sleep Button (CM)'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (CM)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'  (string)
  input.device = '/dev/input/event1'  (string)
  input.product = 'Power Button (CM)'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1'  (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0'
  battery.charge_level.current = 7911  (0x1ee7)  (int)
  battery.charge_level.design = 7800  (0x1e78)  (int)
  battery.charge_level.last_full = 7911  (0x1ee7)  (int)
  battery.charge_level.percentage = 100  (0x64)  (int)
  battery.charge_level.rate = 1  (0x1)  (int)
  battery.is_rechargeable = true  (bool)
  battery.model = 'Dell'  (string)
  battery.present = true  (bool)
  battery.rechargeable.is_charging = false  (bool)
  battery.rechargeable.is_discharging = false  (bool)
  battery.reporting.current = 7911  (0x1ee7)  (int)
  battery.reporting.design = 7800  (0x1e78)  (int)
  battery.reporting.last_full = 7911  (0x1ee7)  (int)
  battery.reporting.rate = 1  (0x1)  (int)
  battery.reporting.technology = 'Li-ion'  (string)
  battery.reporting.unit = 'mWh'  (string)
  battery.serial = '20897'  (string)
  battery.technology = 'lithium-ion'  (string)
  battery.type = 'primary'  (string)
  battery.vendor = 'SDI'  (string)
  battery.voltage.current = 12511  (0x30df)  (int)
  battery.voltage.design = 11100  (0x2b5c)  (int)
  battery.voltage.unit = 'mV'  (string)
  info.capabilities = {'battery'} (string list)
  info.category = 'battery'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Dell'  (string)
  info.subsystem = 'power_supply'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'power_supply'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0'  (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ADP1'
  ac_adapter.present = true  (bool)
  info.capabilities = {'ac_adapter'} (string list)
  info.category = 'ac_adapter'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Generic AC Adapter Device'  (string)
  info.subsystem = 'power_supply'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ADP1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'power_supply'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/ADP1'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (FF)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string)
  input.device = '/dev/input/event0'  (string)
  input.product = 'Power Button (FF)'  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
  info.linux.driver = 'i8042 aux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PS/2 Port for PS/2-style Mice'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)
  pnp.description = 'PS/2 Port for PS/2-style Mice'  (string)
  pnp.id = 'PNP0f13'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
  info.linux.driver = 'i8042 kbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)
  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  pnp.id = 'PNP0303'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  info.linux.driver = 'rtc_cmos'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT Real-Time Clock'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)
  pnp.description = 'AT Real-Time Clock'  (string)
  pnp.id = 'PNP0b00'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_ITE8708'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (ITE8708)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_ITE8708'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)
  pnp.id = 'ITE8708'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Math Coprocessor'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)
  pnp.description = 'Math Coprocessor'  (string)
  pnp.id = 'PNP0c04'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (PNP0103)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)
  pnp.id = 'PNP0103'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT DMA Controller'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)
  pnp.description = 'AT DMA Controller'  (string)
  pnp.id = 'PNP0200'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (PNP0a08)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)
  pnp.id = 'PNP0a08'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
  platform.id = 'serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (regulatory.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/regulatory.0'  (string)
  platform.id = 'regulatory.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
  info.linux.driver = 'pcspkr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (pcspkr)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr'  (string)
  platform.id = 'pcspkr'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
  info.capabilities = {'input'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  info.product = 'PC Speaker'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'  (string)
  input.device = '/dev/input/event8'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  input.product = 'PC Speaker'  (string)
  linux.device_file = '/dev/input/event8'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input8/event8'  (string)

udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
  info.linux.driver = 'iTCO_wdt'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (iTCO_wdt)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/iTCO_wdt'  (string)
  platform.id = 'iTCO_wdt'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
  info.linux.driver = 'i8042'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i8042)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042'  (string)
  platform.id = 'i8042'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
  info.linux.driver = 'psmouse'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'  (string)
  serio.description = 'i8042 AUX port'  (string)
  serio.id = 'serio1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input_0'
  access_control.file = '/dev/input/event13'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'input.touchpad', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  info.product = 'AlpsPS/2 ALPS GlidePoint'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input_0'  (string)
  input.device = '/dev/input/event13'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  input.product = 'AlpsPS/2 ALPS GlidePoint'  (string)
  input.x11_driver = 'synaptics'  (string)
  linux.device_file = '/dev/input/event13'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input13/event13'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
  access_control.file = '/dev/input/event12'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  info.product = 'PS/2 Mouse'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'  (string)
  input.device = '/dev/input/event12'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  input.product = 'PS/2 Mouse'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event12'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input12/event12'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  info.linux.driver = 'atkbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 KBD port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'  (string)
  serio.description = 'i8042 KBD port'  (string)
  serio.id = 'serio0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'hal-setup-keymap', 'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'input.keymap', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  info.product = 'AT Translated Set 2 keyboard'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'  (string)
  input.device = '/dev/input/event5'  (string)
  input.keymap.data = {'e001:playpause', 'e002:stopcd', 'e003:previoussong', 'e004:nextsong', 'e005:brightnessdown', 'e006:brightnessup', 'e007:battery', 'e008:wlan', 'e009:ejectclosecd', 'e00a:suspend', 'e00b:switchvideomode', 'e00f:switchvideomode', 'e010:previoussong', 'e011:prog1', 'e012:media', 'e013:f23', 'e015:camera', 'e00c:f23', 'e019:nextsong', 'e01b:switchvideomode', 'e022:playpause', 'e024:stopcd', 'e06d:media'} (string list)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  input.product = 'AT Translated Set 2 keyboard'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event5'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input5/event5'  (string)

udi = '/org/freedesktop/Hal/devices/platform_dcdbas'
  info.linux.driver = 'dcdbas'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (dcdbas)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_dcdbas'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/dcdbas'  (string)
  platform.id = 'dcdbas'  (string)

udi = '/org/freedesktop/Hal/devices/dell_lcd_panel'
  info.addons = {'hald-addon-dell-backlight'} (string list)
  info.capabilities = {'laptop_panel'} (string list)
  info.category = 'laptop_panel'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas'  (string)
  info.product = 'Dell Laptop Panel'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/dell_lcd_panel'  (string)
  laptop_panel.access_method = 'custom'  (string)
  laptop_panel.brightness_in_hardware = true  (bool)
  laptop_panel.num_levels = 16  (0x10)  (int)

udi = '/org/freedesktop/Hal/devices/dell_wwan_switch'
  info.capabilities = {'killswitch'} (string list)
  info.category = 'killswitch'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas'  (string)
  info.product = 'Dell WWAN Switch'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/dell_wwan_switch'  (string)
  killswitch.access_method = 'dell'  (string)
  killswitch.type = 'wwan'  (string)
  org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list)

udi = '/org/freedesktop/Hal/devices/dell_wlan_switch'
  info.capabilities = {'killswitch'} (string list)
  info.category = 'killswitch'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas'  (string)
  info.product = 'Dell WLAN Switch'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/dell_wlan_switch'  (string)
  killswitch.access_method = 'dell'  (string)
  killswitch.type = 'wlan'  (string)
  org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list)

udi = '/org/freedesktop/Hal/devices/dell_bluetooth_switch'
  info.capabilities = {'killswitch'} (string list)
  info.category = 'killswitch'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas'  (string)
  info.product = 'Dell Bluetooth Switch'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/dell_bluetooth_switch'  (string)
  killswitch.access_method = 'dell'  (string)
  killswitch.type = 'bluetooth'  (string)
  org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list)

udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (Fixed MDIO bus.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0'  (string)
  platform.id = 'Fixed MDIO bus.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2930'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) SMBus Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2930'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  pci.product = '82801I (ICH9 Family) SMBus Controller'  (string)
  pci.product_id = 10544  (0x2930)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929'
  info.linux.driver = 'ahci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ICH9M/M-E SATA AHCI Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 6  (0x6)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)
  pci.product = 'ICH9M/M-E SATA AHCI Controller'  (string)
  pci.product_id = 10537  (0x2929)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_4'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host5/scsi_host/host5'  (string)
  scsi_host.host = 5  (0x5)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_3'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host4/scsi_host/host4'  (string)
  scsi_host.host = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_2'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host3/scsi_host/host3'  (string)
  scsi_host.host = 3  (0x3)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_1'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/scsi_host/host2'  (string)
  scsi_host.host = 2  (0x2)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/scsi_host/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0_scsi_device_lun0'
  info.linux.driver = 'sr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 1  (0x1)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'DVD+-RW TS-T633A'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'TSSTcorp'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_TS_T633A'
  access_control.file = '/dev/sr0'  (string)
  access_control.type = 'cdrom'  (string)
  block.device = '/dev/sr0'  (string)
  block.is_volume = false  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_TS_T633A'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0_scsi_device_lun0'  (string)
  info.product = 'DVD+-RW TS-T633A'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_TS_T633A'  (string)
  info.vendor = 'TSSTcorp'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'pci'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = true  (bool)
  storage.cdrom.dvdplusrdl = true  (bool)
  storage.cdrom.dvdplusrw = true  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = true  (bool)
  storage.cdrom.dvdram = true  (bool)
  storage.cdrom.dvdrdl = true  (bool)
  storage.cdrom.dvdrw = true  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.mo = false  (bool)
  storage.cdrom.mrw = true  (bool)
  storage.cdrom.mrw_w = true  (bool)
  storage.cdrom.read_speed = 4233  (0x1089)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.support_multisession = true  (bool)
  storage.cdrom.write_speed = 0  (0x0)  (int)
  storage.cdrom.write_speeds = {} (string list)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_version = 'D300'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'DVD+-RW TS-T633A'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'TSSTcorp'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0_scsi_device_lun0_scsi_generic'
  access_control.file = '/dev/sg1'  (string)
  access_control.type = 'cdrom'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'scsi_generic', 'access_control'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_0_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/scsi_generic/sg1'  (string)
  scsi_generic.device = '/dev/sg1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/scsi_host/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 0  (0x0)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'FUJITSU MHZ2250B'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'
  block.device = '/dev/sda'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_scsi_device_lun0'  (string)
  info.product = 'FUJITSU MHZ2250B'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  info.vendor = 'ATA'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda'  (string)
  storage.automount_enabled_hint = false  (bool)
  storage.bus = 'pci'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '0085'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = false  (bool)
  storage.model = 'FUJITSU MHZ2250B'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = 'mbr'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 250059350016  (0x3a38b2e000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = 'SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  storage.size = 250059350016  (0x3a38b2e000)  (uint64)
  storage.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_3b72ce9c_a259_43be_bda0_f7ab4ec1ebf5'
  block.device = '/dev/sda4'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 4  (0x4)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  info.product = 'Volume (swap)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_3b72ce9c_a259_43be_bda0_f7ab4ec1ebf5'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda4'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'swap'  (string)
  volume.fsusage = 'other'  (string)
  volume.fsversion = '2'  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 9639000  (0x931458)  (uint64)
  volume.partition.media_size = 250059350016  (0x3a38b2e000)  (uint64)
  volume.partition.number = 4  (0x4)  (int)
  volume.partition.start = 245121569280  (0x3912625200)  (uint64)
  volume.size = 4935168000  (0x12628b000)  (uint64)
  volume.uuid = '3b72ce9c-a259-43be-bda0-f7ab4ec1ebf5'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_UJKwPK_qXyu_z3gw_wmMo_s1VE_tNvK_u2Fx8X'
  block.device = '/dev/sda3'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 3  (0x3)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  info.product = 'Volume (LVM2_member)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_UJKwPK_qXyu_z3gw_wmMo_s1VE_tNvK_u2Fx8X'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'LVM2_member'  (string)
  volume.fsusage = 'raid'  (string)
  volume.fsversion = 'LVM2\x20001'  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 439458075  (0x1a31991b)  (uint64)
  volume.partition.media_size = 250059350016  (0x3a38b2e000)  (uint64)
  volume.partition.number = 3  (0x3)  (int)
  volume.partition.start = 20119034880  (0x4af301c00)  (uint64)
  volume.size = 225002534400  (0x3463323600)  (uint64)
  volume.uuid = 'UJKwPK-qXyu-z3gw-wmMo-s1VE-tNvK-u2Fx8X'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_97c53658_3213_4ba5_8dd9_f815b6280068'
  block.device = '/dev/sda2'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 2  (0x2)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_97c53658_3213_4ba5_8dd9_f815b6280068'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/'  (string)
  volume.num_blocks = 39070080  (0x2542980)  (uint64)
  volume.partition.media_size = 250059350016  (0x3a38b2e000)  (uint64)
  volume.partition.number = 2  (0x2)  (int)
  volume.partition.start = 115153920  (0x6dd1c00)  (uint64)
  volume.size = 20003880960  (0x4a8530000)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '97c53658-3213-4ba5-8dd9-f815b6280068'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_07D9_010F'
  block.device = '/dev/sda1'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHZ2250_K83ET89259CR'  (string)
  info.product = 'DellUtility'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_07D9_010F'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'vfat'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = 'FAT16'  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = 'DellUtility'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=', 'flush'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 224847  (0x36e4f)  (uint64)
  volume.partition.media_size = 250059350016  (0x3a38b2e000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.size = 115121664  (0x6dc9e00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '07D9-010F'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2929_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/scsi_generic/sg0'  (string)
  scsi_generic.device = '/dev/sg0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2919'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ICH9M LPC Interface Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2919'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  pci.product = 'ICH9M LPC Interface Controller'  (string)
  pci.product_id = 10521  (0x2919)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801 Mobile PCI Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  pci.product = '82801 Mobile PCI Bridge'  (string)
  pci.product_id = 9288  (0x2448)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_852'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'xD-Picture Card Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_852'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.4'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.4'  (string)
  pci.product = 'xD-Picture Card Controller'  (string)
  pci.product_id = 2130  (0x852)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_592'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'R5C592 Memory Stick Bus Host Adapter'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_592'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.3'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.3'  (string)
  pci.product = 'R5C592 Memory Stick Bus Host Adapter'  (string)
  pci.product_id = 1426  (0x592)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_843'
  info.linux.driver = 'ricoh-mmc'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'R5C843 MMC Host Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_843'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.2'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.2'  (string)
  pci.product = 'R5C843 MMC Host Controller'  (string)
  pci.product_id = 2115  (0x843)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_822'
  info.linux.driver = 'sdhci-pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_822'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.1'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.1'  (string)
  pci.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'  (string)
  pci.product_id = 2082  (0x822)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host'
  info.capabilities = {'mmc_host'} (string list)
  info.category = 'mmc_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1180_822'  (string)
  info.product = 'MMC/SD Host Adapter'  (string)
  info.subsystem = 'mmc_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'mmc_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.1/mmc_host/mmc0'  (string)
  mmc_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_832'
  info.linux.driver = 'ohci1394'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'R5C832 IEEE 1394 Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_832'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.0'  (string)
  pci.product = 'R5C832 IEEE 1394 Controller'  (string)
  pci.product_id = 2098  (0x832)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_293a'
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB2 EHCI Controller #1'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293a'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  pci.product = '82801I (ICH9 Family) USB2 EHCI Controller #1'  (string)
  pci.product_id = 10554  (0x293a)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293a'  (string)
  info.product = '2.0 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 6  (0x6)  (int)
  usb_device.product = '2.0 root hub'  (string)
  usb_device.product_id = 2  (0x2)  (int)
  usb_device.serial = '0000:00:1d.7'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 6  (0x6)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 2  (0x2)  (int)
  usb.serial = '0000:00:1d.7'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2936'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #3'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2936'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #3'  (string)
  pci.product_id = 10550  (0x2936)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2936'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/008/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb8'  (string)
  usb_device.bus_number = 8  (0x8)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb8'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.2'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0'  (string)
  usb.bus_number = 8  (0x8)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.2'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2935'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #2'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2935'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #2'  (string)
  pci.product_id = 10549  (0x2935)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2935'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/007/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb7'  (string)
  usb_device.bus_number = 7  (0x7)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb7'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.1'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0'  (string)
  usb.bus_number = 7  (0x7)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.1'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2934'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #1'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2934'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #1'  (string)
  pci.product_id = 10548  (0x2934)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2934'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/006/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb6'  (string)
  usb_device.bus_number = 6  (0x6)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb6'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.0'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0'  (string)
  usb.bus_number = 6  (0x6)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_294a'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) PCI Express Port 6'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_294a'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.5'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.5'  (string)
  pci.product = '82801I (ICH9 Family) PCI Express Port 6'  (string)
  pci.product_id = 10570  (0x294a)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_14e4_1698'
  info.linux.driver = 'tg3'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_294a'  (string)
  info.product = 'NetLink BCM5784M Gigabit Ethernet PCIe'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_14e4_1698'  (string)
  info.vendor = 'Broadcom Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.5/0000:08:00.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.5/0000:08:00.0'  (string)
  pci.product = 'NetLink BCM5784M Gigabit Ethernet PCIe'  (string)
  pci.product_id = 5784  (0x1698)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Broadcom Corporation'  (string)
  pci.vendor_id = 5348  (0x14e4)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_21_70_84_fd_02'
  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
  info.category = 'net.80203'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_14e4_1698'  (string)
  info.product = 'Networking Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_21_70_84_fd_02'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.5/0000:08:00.0/net/eth0'  (string)
  net.80203.mac_address = 143621684482  (0x217084fd02)  (uint64)
  net.address = '00:21:70:84:fd:02'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth0'  (string)
  net.linux.ifindex = 2  (0x2)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_14e4_1698'  (string)
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

udi = '/org/freedesktop/Hal/devices/pci_8086_2946'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) PCI Express Port 4'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2946'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3'  (string)
  pci.product = '82801I (ICH9 Family) PCI Express Port 4'  (string)
  pci.product_id = 10566  (0x2946)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2942'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) PCI Express Port 2'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2942'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1'  (string)
  pci.product = '82801I (ICH9 Family) PCI Express Port 2'  (string)
  pci.product_id = 10562  (0x2942)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_4232'
  info.linux.driver = 'iwlagn'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2942'  (string)
  info.product = 'Wireless WiFi Link 5100'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0'  (string)
  pci.product = 'Wireless WiFi Link 5100'  (string)
  pci.product_id = 16946  (0x4232)  (int)
  pci.subsys_product_id = 4897  (0x1321)  (int)
  pci.subsys_vendor = 'Intel Corporation'  (string)
  pci.subsys_vendor_id = 32902  (0x8086)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_2'
  info.capabilities = {'leds'} (string list)
  info.category = 'leds'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.subsystem = 'leds'  (string)
  info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_2'  (string)
  leds.colour = 'RX'  (string)
  leds.device_name = 'iwl-phy0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'leds'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/leds/iwl-phy0:RX'  (string)

udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_1'
  info.capabilities = {'leds'} (string list)
  info.category = 'leds'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.subsystem = 'leds'  (string)
  info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_1'  (string)
  leds.colour = 'TX'  (string)
  leds.device_name = 'iwl-phy0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'leds'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/leds/iwl-phy0:TX'  (string)

udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_0'
  info.capabilities = {'leds'} (string list)
  info.category = 'leds'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.subsystem = 'leds'  (string)
  info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_0'  (string)
  leds.colour = 'assoc'  (string)
  leds.device_name = 'iwl-phy0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'leds'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/leds/iwl-phy0:assoc'  (string)

udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0'
  info.capabilities = {'leds'} (string list)
  info.category = 'leds'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.subsystem = 'leds'  (string)
  info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0'  (string)
  leds.colour = 'radio'  (string)
  leds.device_name = 'iwl-phy0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'leds'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/leds/iwl-phy0:radio'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_4232_rfkill_5100AGN_wlan'
  info.addons.singleton = {'hald-addon-rfkill-killswitch'} (string list)
  info.capabilities = {'killswitch'} (string list)
  info.category = 'killswitch'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.product = '5100AGN wlan Killswitch'  (string)
  info.subsystem = 'rfkill'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_4232_rfkill_5100AGN_wlan'  (string)
  info.vendor = 'Intel Corporation'  (string)
  killswitch.access_method = 'rfkill'  (string)
  killswitch.name = '5100AGN'  (string)
  killswitch.state = 1  (0x1)  (int)
  killswitch.type = 'wlan'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'rfkill'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/rfkill/rfkill0'  (string)

udi = '/org/freedesktop/Hal/devices/net_00_21_5d_27_8a_7c_0'
  info.capabilities = {'net', 'net.80211control'} (string list)
  info.category = 'net.80211control'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.product = 'Networking Wireless Control Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_21_5d_27_8a_7c_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/net/wmaster0'  (string)
  net.address = '00:21:5d:27:8a:7c'  (string)
  net.arp_proto_hw_id = 801  (0x321)  (int)
  net.interface = 'wmaster0'  (string)
  net.linux.ifindex = 3  (0x3)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)

udi = '/org/freedesktop/Hal/devices/net_00_21_5d_27_8a_7c'
  info.capabilities = {'net', 'net.80211'} (string list)
  info.category = 'net.80211'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.product = 'WLAN Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_21_5d_27_8a_7c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/net/wlan0'  (string)
  net.80211.mac_address = 143296793212  (0x215d278a7c)  (uint64)
  net.address = '00:21:5d:27:8a:7c'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'wlan0'  (string)
  net.linux.ifindex = 4  (0x4)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2940'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) PCI Express Port 1'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2940'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'  (string)
  pci.product = '82801I (ICH9 Family) PCI Express Port 1'  (string)
  pci.product_id = 10560  (0x2940)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e'
  info.linux.driver = 'HDA Intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) HD Audio Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0'  (string)
  pci.device_class = 4  (0x4)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0'  (string)
  pci.product = '82801I (ICH9 Family) HD Audio Controller'  (string)
  pci.product_id = 10558  (0x293e)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'
  info.capabilities = {'sound'} (string list)
  info.category = 'sound'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e'  (string)
  info.product = 'HDA Intel Sound Card'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0'  (string)
  sound.card = 0  (0x0)  (int)
  sound.card_id = 'HDA Intel'  (string)
  sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_playback_0'
  access_control.file = '/dev/snd/pcmC0D0p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0p'  (string)
  alsa.device_id = 'STAC92xx Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_playback_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_capture_0'
  access_control.file = '/dev/snd/pcmC0D0c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0c'  (string)
  alsa.device_id = 'STAC92xx Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_capture_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_mixer__1'
  access_control.file = '/dev/mixer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog OSS Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_mixer__1'  (string)
  linux.device_file = '/dev/mixer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device_file = '/dev/mixer'  (string)
  oss.device_id = 'STAC92xx Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  oss.type = 'mixer'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0_0'
  access_control.file = '/dev/dsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0_0'  (string)
  linux.device_file = '/dev/dsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/dsp'  (string)
  oss.device_id = 'STAC92xx Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_control__1'
  access_control.file = '/dev/snd/controlC0'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device_file = '/dev/snd/controlC0'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  alsa.type = 'control'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'HDA Intel ALSA Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_control__1'  (string)
  linux.device_file = '/dev/snd/controlC0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0'
  access_control.file = '/dev/audio'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0'  (string)
  linux.device_file = '/dev/audio'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/audio'  (string)
  oss.device_id = 'STAC92xx Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_logicaldev_input'
  info.capabilities = {'input'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e'  (string)
  info.product = 'HDA Digital PCBeep'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_logicaldev_input'  (string)
  input.device = '/dev/input/event11'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e'  (string)
  input.product = 'HDA Digital PCBeep'  (string)
  linux.device_file = '/dev/input/event11'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/input/input11/event11'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293c'
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB2 EHCI Controller #2'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293c'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7'  (string)
  pci.product = '82801I (ICH9 Family) USB2 EHCI Controller #2'  (string)
  pci.product_id = 10556  (0x293c)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293c'  (string)
  info.product = '2.0 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 6  (0x6)  (int)
  usb_device.product = '2.0 root hub'  (string)
  usb_device.product_id = 2  (0x2)  (int)
  usb_device.serial = '0000:00:1a.7'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7'  (string)
  info.product = 'Integrated Webcam'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial'  (string)
  info.vendor = 'Ricoh Co., Ltd'  (string)
  linux.device_file = '/dev/bus/usb/001/004'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 239  (0xef)  (int)
  usb_device.device_protocol = 1  (0x1)  (int)
  usb_device.device_revision_bcd = 34609  (0x8731)  (int)
  usb_device.device_subclass = 2  (0x2)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 4  (0x4)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6'  (string)
  usb_device.max_power = 100  (0x64)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 2  (0x2)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'Integrated Webcam'  (string)
  usb_device.product_id = 6305  (0x18a1)  (int)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Ricoh Co., Ltd'  (string)
  usb_device.vendor_id = 1482  (0x5ca)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if1'
  info.linux.driver = 'uvcvideo'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial'  (string)
  info.product = 'USB Video Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.1'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 239  (0xef)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 34609  (0x8731)  (int)
  usb.device_subclass = 2  (0x2)  (int)
  usb.interface.class = 14  (0xe)  (int)
  usb.interface.number = 1  (0x1)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 2  (0x2)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 4  (0x4)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.1'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Video Interface'  (string)
  usb.product_id = 6305  (0x18a1)  (int)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Ricoh Co., Ltd'  (string)
  usb.vendor_id = 1482  (0x5ca)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if0'
  info.linux.driver = 'uvcvideo'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial'  (string)
  info.product = 'USB Video Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 239  (0xef)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 34609  (0x8731)  (int)
  usb.device_subclass = 2  (0x2)  (int)
  usb.interface.class = 14  (0xe)  (int)
  usb.interface.description = 'Integrated Webcam'  (string)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 4  (0x4)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Video Interface'  (string)
  usb.product_id = 6305  (0x18a1)  (int)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Ricoh Co., Ltd'  (string)
  usb.vendor_id = 1482  (0x5ca)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if0_video4linux'
  access_control.file = '/dev/video0'  (string)
  access_control.type = 'video4linux'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'video4linux', 'video4linux.video_capture', 'access_control'} (string list)
  info.category = 'video4linux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if0'  (string)
  info.product = 'Integrated Webcam'  (string)
  info.subsystem = 'video4linux'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if0_video4linux'  (string)
  linux.device_file = '/dev/video0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'video4linux'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/video4linux/video0'  (string)
  video4linux.device = '/dev/video0'  (string)
  video4linux.version = '2'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if0_logicaldev_input'
  button.has_state = false  (bool)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if0'  (string)
  info.product = 'Integrated Webcam'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event10'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_5ca_18a1_noserial_if0'  (string)
  input.product = 'Integrated Webcam'  (string)
  linux.device_file = '/dev/input/event10'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10/event10'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 6  (0x6)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 2  (0x2)  (int)
  usb.serial = '0000:00:1a.7'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2939'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #6'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2939'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #6'  (string)
  pci.product_id = 10553  (0x2939)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2939'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/005/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5'  (string)
  usb_device.bus_number = 5  (0x5)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1a.2'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2810_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2'  (string)
  info.product = 'Fingerprint Sensor'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2810_noserial'  (string)
  info.vendor = 'AuthenTec, Inc.'  (string)
  linux.device_file = '/dev/bus/usb/005/002'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1'  (string)
  usb_device.bus_number = 5  (0x5)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 255  (0xff)  (int)
  usb_device.device_protocol = 255  (0xff)  (int)
  usb_device.device_revision_bcd = 5891  (0x1703)  (int)
  usb_device.device_subclass = 255  (0xff)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1'  (string)
  usb_device.max_power = 100  (0x64)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'Fingerprint Sensor'  (string)
  usb_device.product_id = 10256  (0x2810)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'AuthenTec, Inc.'  (string)
  usb_device.vendor_id = 2303  (0x8ff)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2810_noserial_if0'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_8ff_2810_noserial'  (string)
  info.product = 'USB Vendor Specific Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2810_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0'  (string)
  usb.bus_number = 5  (0x5)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 255  (0xff)  (int)
  usb.device_protocol = 255  (0xff)  (int)
  usb.device_revision_bcd = 5891  (0x1703)  (int)
  usb.device_subclass = 255  (0xff)  (int)
  usb.interface.class = 255  (0xff)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 255  (0xff)  (int)
  usb.interface.subclass = 255  (0xff)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Vendor Specific Interface'  (string)
  usb.product_id = 10256  (0x2810)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'AuthenTec, Inc.'  (string)
  usb.vendor_id = 2303  (0x8ff)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0'  (string)
  usb.bus_number = 5  (0x5)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1a.2'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2938'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #5'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2938'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #5'  (string)
  pci.product_id = 10552  (0x2938)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2938'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/004/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb4'  (string)
  usb_device.bus_number = 4  (0x4)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb4'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1a.1'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0'  (string)
  usb.bus_number = 4  (0x4)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1a.1'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2937'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #4'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2937'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #4'  (string)
  pci.product_id = 10551  (0x2937)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2937'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1a.0'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0'  (string)
  info.product = 'BCM2046B1'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'  (string)
  info.vendor = 'Broadcom Corp.'  (string)
  linux.device_file = '/dev/bus/usb/003/002'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1'  (string)
  usb_device.max_power = 94  (0x5e)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 3  (0x3)  (int)
  usb_device.product = 'BCM2046B1'  (string)
  usb_device.product_id = 17664  (0x4500)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Broadcom Corp.'  (string)
  usb_device.vendor_id = 2652  (0xa5c)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'  (string)
  info.product = 'Dell Wireless 370 Bluetooth Mini-card'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'  (string)
  info.vendor = 'Dell Computer Corp.'  (string)
  linux.device_file = '/dev/bus/usb/003/005'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.device_class = 224  (0xe0)  (int)
  usb_device.device_protocol = 1  (0x1)  (int)
  usb_device.device_revision_bcd = 370  (0x172)  (int)
  usb_device.device_subclass = 1  (0x1)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 5  (0x5)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3'  (string)
  usb_device.max_power = 100  (0x64)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'Dell Wireless 370 Bluetooth Mini-card'  (string)
  usb_device.product_id = 33110  (0x8156)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Dell Computer Corp.'  (string)
  usb_device.vendor_id = 16700  (0x413c)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if1'
  info.linux.driver = 'btusb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'  (string)
  info.product = 'USB Wireless Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.1'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.device_class = 224  (0xe0)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 370  (0x172)  (int)
  usb.device_subclass = 1  (0x1)  (int)
  usb.interface.class = 224  (0xe0)  (int)
  usb.interface.number = 1  (0x1)  (int)
  usb.interface.protocol = 1  (0x1)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 5  (0x5)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.1'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Wireless Interface'  (string)
  usb.product_id = 33110  (0x8156)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0'
  info.linux.driver = 'btusb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'  (string)
  info.product = 'USB Wireless Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.device_class = 224  (0xe0)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 370  (0x172)  (int)
  usb.device_subclass = 1  (0x1)  (int)
  usb.interface.class = 224  (0xe0)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 1  (0x1)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 5  (0x5)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Wireless Interface'  (string)
  usb.product_id = 33110  (0x8156)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0_bluetooth_hci_0'
  bluetooth_hci.address = 0  (0x0)  (uint64)
  bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0'  (string)
  info.capabilities = {'bluetooth_hci'} (string list)
  info.category = 'bluetooth_hci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0'  (string)
  info.product = 'Bluetooth Host Controller Interface'  (string)
  info.subsystem = 'bluetooth'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0_bluetooth_hci_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'bluetooth'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/bluetooth/hci0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if2'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'  (string)
  info.product = 'USB Vendor Specific Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.2'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.device_class = 224  (0xe0)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 370  (0x172)  (int)
  usb.device_subclass = 1  (0x1)  (int)
  usb.interface.class = 255  (0xff)  (int)
  usb.interface.number = 2  (0x2)  (int)
  usb.interface.protocol = 255  (0xff)  (int)
  usb.interface.subclass = 255  (0xff)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 5  (0x5)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.2'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Vendor Specific Interface'  (string)
  usb.product_id = 33110  (0x8156)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if3'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'  (string)
  info.product = 'USB Application Specific Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.3'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.device_class = 224  (0xe0)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 370  (0x172)  (int)
  usb.device_subclass = 1  (0x1)  (int)
  usb.interface.class = 254  (0xfe)  (int)
  usb.interface.number = 3  (0x3)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 5  (0x5)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.3'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Application Specific Interface'  (string)
  usb.product_id = 33110  (0x8156)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 256  (0x100)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0'  (string)
  usb.max_power = 94  (0x5e)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 3  (0x3)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 17664  (0x4500)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Broadcom Corp.'  (string)
  usb.vendor_id = 2652  (0xa5c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8158_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'  (string)
  info.product = 'Unknown (0x8158)'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8158_noserial'  (string)
  info.vendor = 'Dell Computer Corp.'  (string)
  linux.device_file = '/dev/bus/usb/003/004'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 4  (0x4)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2'  (string)
  usb_device.max_power = 2  (0x2)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product_id = 33112  (0x8158)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Dell Computer Corp.'  (string)
  usb_device.vendor_id = 16700  (0x413c)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8158_noserial_if0'
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8158_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8158_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 256  (0x100)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 2  (0x2)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 4  (0x4)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0'  (string)
  usb.max_power = 2  (0x2)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 33112  (0x8158)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'  (string)
  info.product = 'Unknown (0x8157)'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial'  (string)
  info.vendor = 'Dell Computer Corp.'  (string)
  linux.device_file = '/dev/bus/usb/003/003'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 3  (0x3)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1'  (string)
  usb_device.max_power = 2  (0x2)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product_id = 33111  (0x8157)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Dell Computer Corp.'  (string)
  usb_device.vendor_id = 16700  (0x413c)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0'
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 256  (0x100)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 1  (0x1)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 3  (0x3)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0'  (string)
  usb.max_power = 2  (0x2)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 33111  (0x8157)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0'  (string)
  info.product = 'HID 413c:8157'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event6'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0'  (string)
  input.product = 'HID 413c:8157'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event6'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input6/event6'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1a.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2a41'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Mobile 4 Series Chipset PCI Express Graphics Port'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a41'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
  pci.product = 'Mobile 4 Series Chipset PCI Express Graphics Port'  (string)
  pci.product_id = 10817  (0x2a41)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_aa28'
  info.linux.driver = 'HDA Intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2a41'  (string)
  info.product = 'RV620 Audio device [Radeon HD 34xx Series]'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_aa28'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1'  (string)
  pci.device_class = 4  (0x4)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1'  (string)
  pci.product = 'RV620 Audio device [Radeon HD 34xx Series]'  (string)
  pci.product_id = 43560  (0xaa28)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0'
  info.capabilities = {'sound'} (string list)
  info.category = 'sound'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_aa28'  (string)
  info.product = 'HDA ATI HDMI Sound Card'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1'  (string)
  sound.card = 1  (0x1)  (int)
  sound.card_id = 'HDA ATI HDMI'  (string)
  sound.originating_device = '/org/freedesktop/Hal/devices/pci_1002_aa28'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0_alsa_control__1'
  access_control.file = '/dev/snd/controlC1'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 1  (0x1)  (int)
  alsa.card_id = 'HDA ATI HDMI'  (string)
  alsa.device_file = '/dev/snd/controlC1'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0'  (string)
  alsa.type = 'control'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0'  (string)
  info.product = 'HDA ATI HDMI ALSA Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0_alsa_control__1'  (string)
  linux.device_file = '/dev/snd/controlC1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/controlC1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0_alsa_playback_3'
  access_control.file = '/dev/snd/pcmC1D3p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 1  (0x1)  (int)
  alsa.card_id = 'HDA ATI HDMI'  (string)
  alsa.device = 3  (0x3)  (int)
  alsa.device_file = '/dev/snd/pcmC1D3p'  (string)
  alsa.device_id = 'ATI HDMI'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0'  (string)
  info.product = 'ATI HDMI ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0_alsa_playback_3'  (string)
  linux.device_file = '/dev/snd/pcmC1D3p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/pcmC1D3p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0_oss_mixer__1'
  access_control.file = '/dev/mixer1'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0'  (string)
  info.product = 'HDA ATI HDMI OSS Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0_oss_mixer__1'  (string)
  linux.device_file = '/dev/mixer1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/mixer1'  (string)
  oss.card = 1  (0x1)  (int)
  oss.card_id = 'HDA ATI HDMI'  (string)
  oss.device_file = '/dev/mixer1'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_aa28_sound_card_0'  (string)
  oss.type = 'mixer'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_95c4'
  info.linux.driver = 'fglrx_pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2a41'  (string)
  info.product = 'Mobility Radeon HD 3400 Series'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_95c4'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'  (string)
  pci.product = 'Mobility Radeon HD 3400 Series'  (string)
  pci.product_id = 38340  (0x95c4)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2a40'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Mobile 4 Series Chipset Memory Controller Hub'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a40'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.product = 'Mobile 4 Series Chipset Memory Controller Hub'  (string)
  pci.product_id = 10816  (0x2a40)  (int)
  pci.subsys_product_id = 671  (0x29f)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/fuse'
  access_control.file = '/dev/fuse'  (string)
  access_control.type = 'camera'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'access_control'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2a40'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/fuse'  (string)


Dumped 145 device(s) from the Global Device List.
------------------------------------------------