[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-17-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu6) ) #37-Ubuntu SMP Mon Mar 10 21:44:01 UTC 2014 (Ubuntu 3.13.0-17.37-generic 3.13.6) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic root=UUID=84164116-5d70-48c7-90af-77b020ac38ce ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf04fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf05000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.00 10/15/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-EAFFF uncachable [ 0.000000] EB000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000043f000000 aka 17392M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC [ 0.000000] total RAM covered: 3064M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd940-0x000fd94f] mapped at [ffff8800000fd940] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE [ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43ee00000-0x43effffff] [ 0.000000] [mem 0x43ee00000-0x43effffff] page 2M [ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43edfffff] [ 0.000000] [mem 0x43c000000-0x43edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff] [ 0.000000] [mem 0x400000000-0x43bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbdf04fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbddfffff] page 2M [ 0.000000] [mem 0xbde00000-0xbdf04fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbee29000-0xbee29fff] [ 0.000000] [mem 0xbee29000-0xbee29fff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbf030000-0xbf452fff] [ 0.000000] [mem 0xbf030000-0xbf1fffff] page 4k [ 0.000000] [mem 0xbf200000-0xbf3fffff] page 2M [ 0.000000] [mem 0xbf400000-0xbf452fff] page 4k [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbf7f4000-0xbf7fffff] [ 0.000000] [mem 0xbf7f4000-0xbf7fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100001000-0x3ffffffff] [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M [ 0.000000] [mem 0x140000000-0x3ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x35c26000-0x36e0afff] [ 0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000be8c5078 00006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000be8cb600 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603) [ 0.000000] ACPI: DSDT 00000000be8c5178 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000be8cf080 000040 [ 0.000000] ACPI: APIC 00000000be8cb710 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000be8cb7b0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000be8cb7f8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: AAFT 00000000be8cb838 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000be8cb8c8 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: BGRT 00000000be8cb900 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 00000000be8cb938 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: IVRS 00000000be8cd050 0000C8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43effffff] [ 0.000000] NODE_DATA [mem 0x43eff5000-0x43eff9fff] [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x43effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0xbdf04fff] [ 0.000000] node 0: [mem 0xbee29000-0xbee29fff] [ 0.000000] node 0: [mem 0xbf030000-0xbf452fff] [ 0.000000] node 0: [mem 0xbf7f4000-0xbf7fffff] [ 0.000000] node 0: [mem 0x100001000-0x43effffff] [ 0.000000] On node 0 totalpages: 4182734 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12109 pages used for memmap [ 0.000000] DMA32 zone: 774965 pages, LIFO batch:31 [ 0.000000] Normal zone: 53184 pages used for memmap [ 0.000000] Normal zone: 3403775 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdf05000-0xbe4e2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] e820: [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043ec00000 s86336 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4117356 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic root=UUID=84164116-5d70-48c7-90af-77b020ac38ce ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ b4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 16301300K/16730936K available (7320K kernel code, 1138K rwdata, 3384K rodata, 1336K init, 1440K bss, 429636K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:1288 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3093.192 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.38 BogoMIPS (lpj=12372768) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000030] Security Framework initialized [ 0.000046] AppArmor: AppArmor initialized [ 0.000048] Yama: becoming mindful. [ 0.001323] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.005208] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006872] Mount-cache hash table entries: 256 [ 0.007045] Initializing cgroup subsys memory [ 0.007051] Initializing cgroup subsys devices [ 0.007053] Initializing cgroup subsys freezer [ 0.007055] Initializing cgroup subsys blkio [ 0.007056] Initializing cgroup subsys perf_event [ 0.007058] Initializing cgroup subsys hugetlb [ 0.007076] tseg: 00bf800000 [ 0.007078] CPU: Physical Processor ID: 0 [ 0.007079] CPU: Processor Core ID: 0 [ 0.007081] mce: CPU supports 7 MCE banks [ 0.007087] LVT offset 1 assigned for vector 0xf9 [ 0.007092] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.007092] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.007092] tlb_flushall_shift: 5 [ 0.007175] Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000) [ 0.007978] ACPI: Core revision 20131115 [ 0.010083] ACPI: All ACPI Tables successfully acquired [ 0.015115] ftrace: allocating 28370 entries in 111 pages [ 0.105760] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.145441] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (fam: 15, model: 01, stepping: 02) [ 0.253401] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.253406] ... version: 0 [ 0.253407] ... bit width: 48 [ 0.253408] ... generic registers: 6 [ 0.253409] ... value mask: 0000ffffffffffff [ 0.253410] ... max period: 00007fffffffffff [ 0.253411] ... fixed-purpose events: 0 [ 0.253412] ... event mask: 000000000000003f [ 0.255089] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.255166] x86: Booting SMP configuration: [ 0.255168] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.347485] x86: Booted up 1 node, 8 CPUs [ 0.347489] smpboot: Total of 8 processors activated (49491.07 BogoMIPS) [ 0.362423] devtmpfs: initialized [ 0.366216] EVM: security.selinux [ 0.366218] EVM: security.SMACK64 [ 0.366219] EVM: security.ima [ 0.366220] EVM: security.capability [ 0.366289] PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.366353] PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.367260] pinctrl core: initialized pinctrl subsystem [ 0.367320] regulator-dummy: no parameters [ 0.367344] RTC time: 6:02:34, date: 03/14/14 [ 0.367380] NET: Registered protocol family 16 [ 0.367497] cpuidle: using governor ladder [ 0.367498] cpuidle: using governor menu [ 0.367571] ACPI: bus type PCI registered [ 0.367573] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.367636] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.367639] PCI: not using MMCONFIG [ 0.367640] PCI: Using configuration type 1 for base access [ 0.367641] PCI: Using configuration type 1 for extended access [ 0.368952] bio: create slab at 0 [ 0.369164] ACPI: Added _OSI(Module Device) [ 0.369166] ACPI: Added _OSI(Processor Device) [ 0.369167] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.369169] ACPI: Added _OSI(Processor Aggregator Device) [ 0.371594] ACPI: Executed 3 blocks of module-level executable AML code [ 0.375875] ACPI: Interpreter enabled [ 0.375880] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.375884] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.375900] ACPI: (supports S0 S3 S4 S5) [ 0.375902] ACPI: Using IOAPIC for interrupt routing [ 0.376067] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.376111] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.392685] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.392815] ACPI: No dock devices found. [ 0.399400] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.399406] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.399411] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.399912] PCI host bridge to bus 0000:00 [ 0.399915] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.399918] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 0.399920] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 0.399922] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] [ 0.399923] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.399925] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.399927] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.399929] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 0.399940] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.400061] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.400173] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.400207] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.400266] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.400297] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.400330] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.400390] pci 0000:00:05.0: System wakeup disabled by ACPI [ 0.400418] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.400451] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.400509] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.400538] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.400572] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.400629] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.400667] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.400683] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 0.400691] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 0.400698] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 0.400706] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 0.400714] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 0.400723] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] [ 0.400834] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.400845] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] [ 0.400939] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.400971] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.400987] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] [ 0.401051] pci 0000:00:12.2: supports D1 D2 [ 0.401053] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.401110] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.401142] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.401153] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] [ 0.401247] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.401280] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.401295] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] [ 0.401360] pci 0000:00:13.2: supports D1 D2 [ 0.401362] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.401419] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.401450] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.401574] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.401591] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.401666] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.401723] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.401750] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.401874] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.401955] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.401981] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.401993] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] [ 0.402087] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.402116] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.402127] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] [ 0.402223] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.402258] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.402273] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] [ 0.402338] pci 0000:00:16.2: supports D1 D2 [ 0.402340] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.402397] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.402428] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.402509] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.402586] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.402663] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.402744] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.402819] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.402942] pci 0000:01:00.0: [1002:6819] type 00 class 0x030000 [ 0.402953] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.402962] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit] [ 0.402968] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.402979] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] [ 0.403011] pci 0000:01:00.0: supports D1 D2 [ 0.403012] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.403063] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300 [ 0.403074] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] [ 0.403127] pci 0000:01:00.1: supports D1 D2 [ 0.407644] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.407649] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.407651] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.407655] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.407728] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.407744] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit] [ 0.407813] pci 0000:02:00.0: supports D1 D2 [ 0.407815] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.415643] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.415648] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.415697] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.415712] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] [ 0.415780] pci 0000:03:00.0: supports D1 D2 [ 0.415782] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.423641] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.423646] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.423702] pci 0000:04:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.423720] pci 0000:04:00.0: reg 0x10: [mem 0xd0010000-0xd001ffff 64bit pref] [ 0.423734] pci 0000:04:00.0: reg 0x18: [mem 0xd0000000-0xd000ffff 64bit pref] [ 0.423760] pci 0000:04:00.0: reg 0x30: [mem 0xfe700000-0xfe7007ff pref] [ 0.423808] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.431641] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.431646] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.431650] pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.431717] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 0.431725] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) [ 0.431727] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 0.431729] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) [ 0.431730] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.431732] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.431734] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.431736] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.432453] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0 [ 0.432530] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0 [ 0.432608] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0 [ 0.432685] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0 [ 0.432751] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0 [ 0.432803] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0 [ 0.432855] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0 [ 0.432907] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0 [ 0.433049] ACPI: \_SB_.PCI0: notify handler is installed [ 0.433093] Found 1 acpi root devices [ 0.433191] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.433193] vgaarb: loaded [ 0.433195] vgaarb: bridge control possible 0000:01:00.0 [ 0.433366] SCSI subsystem initialized [ 0.433426] libata version 3.00 loaded. [ 0.433444] ACPI: bus type USB registered [ 0.433459] usbcore: registered new interface driver usbfs [ 0.433468] usbcore: registered new interface driver hub [ 0.433495] usbcore: registered new device driver usb [ 0.433623] PCI: Using ACPI for IRQ routing [ 0.440056] PCI: pci_cache_line_size set to 64 bytes [ 0.440112] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff] [ 0.440114] e820: reserve RAM buffer [mem 0xbdf05000-0xbfffffff] [ 0.440116] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] [ 0.440118] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] [ 0.440119] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.440121] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] [ 0.440196] NetLabel: Initializing [ 0.440198] NetLabel: domain hash size = 128 [ 0.440199] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.440211] NetLabel: unlabeled traffic allowed by default [ 0.440272] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.440275] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.442359] Switched to clocksource hpet [ 0.448799] AppArmor: AppArmor Filesystem Enabled [ 0.448815] pnp: PnP ACPI init [ 0.448824] ACPI: bus type PNP registered [ 0.448924] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.448928] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.449051] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.449054] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.449133] system 00:02: [mem 0xfeb20000-0xfeb23fff] could not be reserved [ 0.449136] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.449449] system 00:03: [io 0x040b] has been reserved [ 0.449451] system 00:03: [io 0x04d6] has been reserved [ 0.449453] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.449455] system 00:03: [io 0x0c14] has been reserved [ 0.449457] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.449459] system 00:03: [io 0x0c52] has been reserved [ 0.449461] system 00:03: [io 0x0c6c] has been reserved [ 0.449463] system 00:03: [io 0x0c6f] has been reserved [ 0.449465] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.449467] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.449469] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.449471] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.449473] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.449475] system 00:03: [io 0x0800-0x089f] could not be reserved [ 0.449478] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.449480] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.449483] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.449485] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.449488] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.449490] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.449493] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.449495] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.449497] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.449500] system 00:03: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.449502] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.449505] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.449596] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.449599] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.449851] pnp 00:05: [dma 4] [ 0.449871] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.449904] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.449927] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.449983] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.449986] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.450014] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.450055] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.450300] pnp 00:0b: [dma 0 disabled] [ 0.450345] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.450535] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.450540] pnp: PnP ACPI: found 13 devices [ 0.450541] ACPI: bus type PNP unregistered [ 0.457090] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.457093] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.457097] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.457099] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.457103] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.457106] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.457110] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.457113] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.457117] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.457120] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.457122] pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.457126] pci 0000:00:14.4: PCI bridge to [bus 05] [ 0.457135] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.457137] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.457139] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 0.457141] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 0.457142] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 0.457144] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 0.457146] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff] [ 0.457148] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.457150] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.457152] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.457154] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.457156] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.457158] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.457159] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.457162] pci_bus 0000:05: resource 4 [io 0x0000-0x03af] [ 0.457163] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7] [ 0.457165] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df] [ 0.457167] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff] [ 0.457169] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff] [ 0.457170] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff] [ 0.457172] pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff] [ 0.457198] NET: Registered protocol family 2 [ 0.457421] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.457712] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.457904] TCP: Hash tables configured (established 131072 bind 65536) [ 0.457930] TCP: reno registered [ 0.457955] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.458028] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.458138] NET: Registered protocol family 1 [ 0.750708] pci 0000:01:00.0: Boot video device [ 0.751064] PCI: CLS 64 bytes, default 64 [ 0.751125] Trying to unpack rootfs image as initramfs... [ 1.027086] Freeing initrd memory: 18324K (ffff880035c26000 - ffff880036e0b000) [ 1.027595] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.027596] AMD-Vi: Interrupt remapping enabled [ 1.027611] pci 0000:00:00.2: irq 72 for MSI/MSI-X [ 1.037654] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.122123] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.122126] software IO TLB [mem 0xb9f05000-0xbdf05000] (64MB) mapped at [ffff8800b9f05000-ffff8800bdf04fff] [ 1.122415] perf: AMD NB counters detected [ 1.122448] LVT offset 0 assigned for vector 0x400 [ 1.122477] perf: AMD IBS detected (0x000000ff) [ 1.122516] microcode: CPU0: patch_level=0x06000626 [ 1.122522] microcode: CPU1: patch_level=0x06000626 [ 1.122532] microcode: CPU2: patch_level=0x06000626 [ 1.122539] microcode: CPU3: patch_level=0x06000626 [ 1.122547] microcode: CPU4: patch_level=0x06000626 [ 1.122555] microcode: CPU5: patch_level=0x06000626 [ 1.122563] microcode: CPU6: patch_level=0x06000626 [ 1.122571] microcode: CPU7: patch_level=0x06000626 [ 1.122650] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.122653] Scanning for low memory corruption every 60 seconds [ 1.123004] Initialise system trusted keyring [ 1.123050] audit: initializing netlink socket (disabled) [ 1.123063] type=2000 audit(1394776953.924:1): initialized [ 1.147543] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.149309] zbud: loaded [ 1.149460] VFS: Disk quotas dquot_6.5.2 [ 1.149501] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.149954] fuse init (API version 7.22) [ 1.150028] msgmni has been set to 31874 [ 1.150079] Key type big_key registered [ 1.150578] Key type asymmetric registered [ 1.150580] Asymmetric key parser 'x509' registered [ 1.150608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.150659] io scheduler noop registered [ 1.150660] io scheduler deadline registered (default) [ 1.150684] io scheduler cfq registered [ 1.151121] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.151135] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.151173] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.151174] vesafb: scrolling: redraw [ 1.151176] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.151703] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011b00000, using 8128k, total 8128k [ 1.168482] Console: switching to colour frame buffer device 240x67 [ 1.185110] fb0: VESA VGA frame buffer device [ 1.185130] ipmi message handler version 39.2 [ 1.185183] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.185187] ACPI: Power Button [PWRB] [ 1.185220] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.185223] ACPI: Power Button [PWRF] [ 1.185282] ACPI: acpi_idle registered with cpuidle [ 1.185906] GHES: HEST is not enabled! [ 1.185985] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.206402] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.207810] Linux agpgart interface v0.103 [ 1.209188] brd: module loaded [ 1.209855] loop: module loaded [ 1.210225] libphy: Fixed MDIO Bus: probed [ 1.210325] tun: Universal TUN/TAP device driver, 1.6 [ 1.210326] tun: (C) 1999-2004 Max Krasnyansky [ 1.210375] PPP generic driver version 2.4.2 [ 1.210427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.210437] ehci-pci: EHCI PCI platform driver [ 1.210591] QUIRK: Enable AMD PLL fix [ 1.210610] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.210616] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.210620] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.210628] ehci-pci 0000:00:12.2: debug port 1 [ 1.210665] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.222332] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.222385] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.222387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.222389] usb usb1: Product: EHCI Host Controller [ 1.222391] usb usb1: Manufacturer: Linux 3.13.0-17-generic ehci_hcd [ 1.222392] usb usb1: SerialNumber: 0000:00:12.2 [ 1.222503] hub 1-0:1.0: USB hub found [ 1.222510] hub 1-0:1.0: 5 ports detected [ 1.222773] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.222777] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.222780] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.222789] ehci-pci 0000:00:13.2: debug port 1 [ 1.222814] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 1.234332] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.234377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.234379] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.234381] usb usb2: Product: EHCI Host Controller [ 1.234382] usb usb2: Manufacturer: Linux 3.13.0-17-generic ehci_hcd [ 1.234383] usb usb2: SerialNumber: 0000:00:13.2 [ 1.234576] hub 2-0:1.0: USB hub found [ 1.234582] hub 2-0:1.0: 5 ports detected [ 1.234822] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.234826] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.234829] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.234838] ehci-pci 0000:00:16.2: debug port 1 [ 1.234862] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 1.246327] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.246368] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.246370] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.246371] usb usb3: Product: EHCI Host Controller [ 1.246373] usb usb3: Manufacturer: Linux 3.13.0-17-generic ehci_hcd [ 1.246375] usb usb3: SerialNumber: 0000:00:16.2 [ 1.246543] hub 3-0:1.0: USB hub found [ 1.246549] hub 3-0:1.0: 4 ports detected [ 1.246648] ehci-platform: EHCI generic platform driver [ 1.246657] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.246658] ohci-pci: OHCI PCI platform driver [ 1.246789] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.246793] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.246813] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 1.306333] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.306335] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.306337] usb usb4: Product: OHCI PCI host controller [ 1.306338] usb usb4: Manufacturer: Linux 3.13.0-17-generic ohci_hcd [ 1.306339] usb usb4: SerialNumber: 0000:00:12.0 [ 1.306526] hub 4-0:1.0: USB hub found [ 1.306535] hub 4-0:1.0: 5 ports detected [ 1.306764] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.306768] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.306780] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 1.366312] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.366314] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.366316] usb usb5: Product: OHCI PCI host controller [ 1.366317] usb usb5: Manufacturer: Linux 3.13.0-17-generic ohci_hcd [ 1.366318] usb usb5: SerialNumber: 0000:00:13.0 [ 1.366496] hub 5-0:1.0: USB hub found [ 1.366505] hub 5-0:1.0: 5 ports detected [ 1.366751] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.366755] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.366768] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 1.426306] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.426308] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.426310] usb usb6: Product: OHCI PCI host controller [ 1.426311] usb usb6: Manufacturer: Linux 3.13.0-17-generic ohci_hcd [ 1.426313] usb usb6: SerialNumber: 0000:00:14.5 [ 1.426488] hub 6-0:1.0: USB hub found [ 1.426497] hub 6-0:1.0: 2 ports detected [ 1.426711] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.426716] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.426728] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 1.486303] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.486305] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.486306] usb usb7: Product: OHCI PCI host controller [ 1.486308] usb usb7: Manufacturer: Linux 3.13.0-17-generic ohci_hcd [ 1.486309] usb usb7: SerialNumber: 0000:00:16.0 [ 1.486490] hub 7-0:1.0: USB hub found [ 1.486498] hub 7-0:1.0: 4 ports detected [ 1.486594] ohci-platform: OHCI generic platform driver [ 1.486601] uhci_hcd: USB Universal Host Controller Interface driver [ 1.486669] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.486673] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 1.486775] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X [ 1.486837] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.486838] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.486840] usb usb8: Product: xHCI Host Controller [ 1.486842] usb usb8: Manufacturer: Linux 3.13.0-17-generic xhci_hcd [ 1.486843] usb usb8: SerialNumber: 0000:02:00.0 [ 1.486925] hub 8-0:1.0: USB hub found [ 1.486936] hub 8-0:1.0: 2 ports detected [ 1.487006] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.487010] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 1.487054] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.487055] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.487057] usb usb9: Product: xHCI Host Controller [ 1.487059] usb usb9: Manufacturer: Linux 3.13.0-17-generic xhci_hcd [ 1.487060] usb usb9: SerialNumber: 0000:02:00.0 [ 1.487138] hub 9-0:1.0: USB hub found [ 1.487146] hub 9-0:1.0: 2 ports detected [ 1.498525] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.498530] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10 [ 1.498629] xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X [ 1.498691] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.498692] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.498694] usb usb10: Product: xHCI Host Controller [ 1.498696] usb usb10: Manufacturer: Linux 3.13.0-17-generic xhci_hcd [ 1.498697] usb usb10: SerialNumber: 0000:03:00.0 [ 1.498792] hub 10-0:1.0: USB hub found [ 1.498801] hub 10-0:1.0: 2 ports detected [ 1.498870] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.498873] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 11 [ 1.498914] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.498916] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.498917] usb usb11: Product: xHCI Host Controller [ 1.498919] usb usb11: Manufacturer: Linux 3.13.0-17-generic xhci_hcd [ 1.498921] usb usb11: SerialNumber: 0000:03:00.0 [ 1.499000] hub 11-0:1.0: USB hub found [ 1.499008] hub 11-0:1.0: 2 ports detected [ 1.506512] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.509063] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.509068] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.509179] mousedev: PS/2 mouse device common for all mice [ 1.509418] rtc_cmos 00:06: RTC can wake from S4 [ 1.509537] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.509560] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.509616] device-mapper: uevent: version 1.0.3 [ 1.509687] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.509694] ledtrig-cpu: registered to indicate activity on CPUs [ 1.509789] TCP: cubic registered [ 1.509880] NET: Registered protocol family 10 [ 1.510046] NET: Registered protocol family 17 [ 1.510052] Key type dns_resolver registered [ 1.510534] Loading compiled-in X.509 certificates [ 1.511400] Loaded X.509 cert 'Magrathea: Glacier signing key: 20a8b3c93dd3ff225705f25f2fef4bfbe5d27149' [ 1.511413] registered taskstats version 1 [ 1.515161] Key type trusted registered [ 1.517786] Key type encrypted registered [ 1.520225] AppArmor: AppArmor sha1 policy hashing enabled [ 1.520227] IMA: No TPM chip found, activating TPM-bypass! [ 1.520551] Magic number: 6:627:13 [ 1.520583] memory memory57: hash matches [ 1.520634] rtc_cmos 00:06: setting system clock to 2014-03-14 06:02:35 UTC (1394776955) [ 1.520772] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.521147] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.521149] EDD information not available. [ 1.521192] PM: Hibernation image not present or could not be loaded. [ 1.522320] Freeing unused kernel memory: 1336K (ffffffff81d1e000 - ffffffff81e6c000) [ 1.522322] Write protecting the kernel read-only data: 12288k [ 1.524742] Freeing unused kernel memory: 860K (ffff880001729000 - ffff880001800000) [ 1.526689] Freeing unused kernel memory: 712K (ffff880001b4e000 - ffff880001c00000) [ 1.542495] systemd-udevd[146]: starting version 204 [ 1.563519] pps_core: LinuxPPS API ver. 1 registered [ 1.563523] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.565047] PTP clock support registered [ 1.565552] ahci 0000:00:11.0: version 3.0 [ 1.565822] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.565826] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part [ 1.566787] scsi0 : ahci [ 1.566917] scsi1 : ahci [ 1.567033] scsi2 : ahci [ 1.567145] scsi3 : ahci [ 1.567259] scsi4 : ahci [ 1.567374] scsi5 : ahci [ 1.567430] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 1.567433] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 1.567435] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 1.567438] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 1.567440] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19 [ 1.567443] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19 [ 1.568346] tg3.c:v3.134 (Sep 16, 2013) [ 1.599278] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 00:25:22:df:b1:13 [ 1.599283] tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.599285] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.599287] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.886390] ata5: SATA link down (SStatus 0 SControl 300) [ 1.886463] ata3: SATA link down (SStatus 0 SControl 300) [ 1.886522] ata6: SATA link down (SStatus 0 SControl 300) [ 2.058346] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.058382] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.058415] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.060616] ata2.00: ATA-8: WDC WD10EALS-00Z8A0, 05.01D05, max UDMA/133 [ 2.060619] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.060631] ata4.00: ATAPI: ASUS DRW-24B3ST c, 1.01, max UDMA/100 [ 2.061758] ata4.00: configured for UDMA/100 [ 2.063657] ata2.00: configured for UDMA/133 [ 2.070297] ata1.00: ATA-8: KINGSTON SH103S3120G, 502ABBF0, max UDMA/133 [ 2.070300] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.080252] ata1.00: configured for UDMA/133 [ 2.080542] scsi 0:0:0:0: Direct-Access ATA KINGSTON SH103S3 502A PQ: 0 ANSI: 5 [ 2.080714] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.080762] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.080827] sd 0:0:0:0: [sda] Write Protect is off [ 2.080829] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.080846] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.080903] scsi 1:0:0:0: Direct-Access ATA WDC WD10EALS-00Z 05.0 PQ: 0 ANSI: 5 [ 2.081064] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.081081] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.081175] sda: sda1 [ 2.081192] sd 1:0:0:0: [sdb] Write Protect is off [ 2.081196] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.081236] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.081386] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.084803] scsi 3:0:0:0: CD-ROM ASUS DRW-24B3ST c 1.01 PQ: 0 ANSI: 5 [ 2.088447] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.088449] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.088573] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.088668] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 2.118347] tsc: Refined TSC clocksource calibration: 3093.368 MHz [ 2.131030] sdb: sdb1 sdb2 [ 2.131413] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.222418] usb 5-2: new full-speed USB device number 2 using ohci-pci [ 2.353635] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.387270] usb 5-2: New USB device found, idVendor=046d, idProduct=c223 [ 2.387274] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.387276] usb 5-2: Product: G11 Keyboard [ 2.389288] hub 5-2:1.0: USB hub found [ 2.391353] hub 5-2:1.0: 4 ports detected [ 2.492397] random: init urandom read with 77 bits of entropy available [ 2.599919] Adding 9764860k swap on /dev/sdb1. Priority:-1 extents:1 across:9764860k FS [ 2.604943] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 2.648500] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.677730] systemd-udevd[411]: starting version 204 [ 2.698200] usb 5-3: new full-speed USB device number 3 using ohci-pci [ 2.703131] lp: driver loaded but no devices found [ 2.715319] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 2.729684] wmi: Mapper loaded [ 2.747506] [drm] Initialized drm 1.1.0 20060810 [ 2.769479] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.769548] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.770312] MCE: In-kernel MCE decoding enabled. [ 2.772611] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 2.772700] sp5100_tco: PCI Revision ID: 0x42 [ 2.772733] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 2.772744] sp5100_tco: Last reboot was not triggered by watchdog. [ 2.773613] EDAC MC: Ver: 3.0.0 [ 2.774516] sp5100_tco: initialized (0xffffc90011adab00). heartbeat=60 sec (nowayout=0) [ 2.777423] AMD64 EDAC driver v3.4.0 [ 2.777447] EDAC amd64: DRAM ECC disabled. [ 2.777462] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 2.777462] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 2.777462] (Note that use of the override may cause unknown side effects.) [ 2.799158] init: flush-early-job-log main process (467) terminated with status 1 [ 2.802094] [drm] radeon kernel modesetting enabled. [ 2.802226] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 2.802228] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver [ 2.802249] Console: switching to colour dummy device 80x25 [ 2.802788] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6819 0x1462:0x2730). [ 2.802845] [drm] register mmio base: 0xFEA00000 [ 2.802846] [drm] register mmio size: 262144 [ 2.802918] ATOM BIOS: 113 [ 2.802981] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 2.802983] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [ 2.802985] [drm] Detected VRAM RAM=2048M, BAR=256M [ 2.802987] [drm] RAM width 256bits DDR [ 2.805320] [TTM] Zone kernel: Available graphics memory: 8161280 kiB [ 2.805323] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.805324] [TTM] Initializing pool allocator [ 2.805328] [TTM] Initializing DMA pool allocator [ 2.805355] [drm] radeon: 2048M of VRAM memory ready [ 2.805356] [drm] radeon: 1024M of GTT memory ready. [ 2.805532] hda-intel 0000:00:14.2: Using LPIB position fix [ 2.808766] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.810110] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0 [ 2.810116] [drm] PCIE gen 2 link speeds already enabled [ 2.813925] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 2.814779] [drm] Loading PITCAIRN Microcode [ 2.817492] random: nonblocking pool is initialized [ 2.818350] systemd-udevd[430]: renamed network interface eth0 to eth1 [ 2.820576] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000). [ 2.820707] radeon 0000:01:00.0: WB enabled [ 2.820711] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880426330c00 [ 2.820714] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880426330c04 [ 2.820717] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880426330c08 [ 2.820720] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880426330c0c [ 2.820722] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880426330c10 [ 2.821712] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90011cb5a18 [ 2.821714] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.821716] [drm] Driver supports precise vblank timestamp query. [ 2.821742] radeon 0000:01:00.0: irq 75 for MSI/MSI-X [ 2.821754] radeon 0000:01:00.0: radeon: using MSI. [ 2.821787] [drm] radeon: irq initialized. [ 2.825338] SKU: Nid=0x1d sku_cfg=0x4006de01 [ 2.825341] SKU: port_connectivity=0x1 [ 2.825343] SKU: enable_pcbeep=0x0 [ 2.825344] SKU: check_sum=0x00000006 [ 2.825346] SKU: customization=0x000000de [ 2.825347] SKU: external_amp=0x0 [ 2.825349] SKU: platform_type=0x0 [ 2.825350] SKU: swap=0x0 [ 2.825351] SKU: override=0x1 [ 2.825733] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 2.825735] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.825737] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 2.825739] mono: mono_out=0x0 [ 2.825740] dig-out=0x1e/0x0 [ 2.825741] inputs: [ 2.825743] Front Mic=0x19 [ 2.825745] Rear Mic=0x18 [ 2.825747] Line=0x1a [ 2.825748] realtek: No valid SSID, checking pincfg 0x4006de01 for NID 0x1d [ 2.825750] realtek: Enabling init ASM_ID=0xde01 CODEC_ID=10ec0892 [ 2.848975] kvm: Nested Virtualization enabled [ 2.848982] kvm: Nested Paging enabled [ 2.849321] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 2.849415] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 2.849501] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 2.850889] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 2.851015] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 2.851110] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 2.851247] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 2.851368] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 2.871210] usb 5-3: New USB device found, idVendor=046d, idProduct=c049 [ 2.871214] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.871217] usb 5-3: Product: USB Gaming Mouse [ 2.871220] usb 5-3: Manufacturer: Logitech [ 2.902739] hidraw: raw HID events driver (C) Jiri Kosina [ 2.914386] usbcore: registered new interface driver usbhid [ 2.914389] usbhid: USB HID core driver [ 2.917813] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input13 [ 2.917998] hid-generic 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:13.0-3/input0 [ 2.925143] Bluetooth: Core ver 2.17 [ 2.925166] NET: Registered protocol family 31 [ 2.925168] Bluetooth: HCI device and connection manager initialized [ 2.925176] Bluetooth: HCI socket layer initialized [ 2.925179] Bluetooth: L2CAP socket layer initialized [ 2.925185] Bluetooth: SCO socket layer initialized [ 2.929098] hid-generic 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:13.0-3/input1 [ 2.934368] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.934371] Bluetooth: BNEP filters: protocol multicast [ 2.934378] Bluetooth: BNEP socket layer initialized [ 2.954288] Bluetooth: RFCOMM TTY layer initialized [ 2.954301] Bluetooth: RFCOMM socket layer initialized [ 2.954310] Bluetooth: RFCOMM ver 1.11 [ 2.955881] type=1400 audit(1394776956.930:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=619 comm="apparmor_parser" [ 2.955887] type=1400 audit(1394776956.930:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=619 comm="apparmor_parser" [ 2.956446] type=1400 audit(1394776956.930:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=619 comm="apparmor_parser" [ 2.991335] type=1400 audit(1394776956.966:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=633 comm="apparmor_parser" [ 2.991341] type=1400 audit(1394776956.966:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=633 comm="apparmor_parser" [ 2.991346] type=1400 audit(1394776956.966:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=633 comm="apparmor_parser" [ 2.991883] type=1400 audit(1394776956.966:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=633 comm="apparmor_parser" [ 2.991891] type=1400 audit(1394776956.966:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=633 comm="apparmor_parser" [ 2.992190] type=1400 audit(1394776956.966:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=633 comm="apparmor_parser" [ 3.007235] init: cups main process (622) killed by HUP signal [ 3.007250] init: cups main process ended, respawning [ 3.028748] [drm] ring test on 0 succeeded in 2 usecs [ 3.028755] [drm] ring test on 1 succeeded in 1 usecs [ 3.028761] [drm] ring test on 2 succeeded in 1 usecs [ 3.028830] [drm] ring test on 3 succeeded in 2 usecs [ 3.028841] [drm] ring test on 4 succeeded in 1 usecs [ 3.214550] [drm] ring test on 5 succeeded in 2 usecs [ 3.214561] [drm] UVD initialized successfully. [ 3.214996] Switched to clocksource tsc [ 3.216180] [drm] Enabling audio 0 support [ 3.216182] [drm] Enabling audio 1 support [ 3.216183] [drm] Enabling audio 2 support [ 3.216185] [drm] Enabling audio 3 support [ 3.216186] [drm] Enabling audio 4 support [ 3.216187] [drm] Enabling audio 5 support [ 3.216255] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.216317] [drm] ib test on ring 1 succeeded in 0 usecs [ 3.216382] [drm] ib test on ring 2 succeeded in 0 usecs [ 3.216418] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.216473] [drm] ib test on ring 4 succeeded in 1 usecs [ 3.298067] init: failsafe main process (651) killed by TERM signal [ 3.367520] [drm] ib test on ring 5 succeeded [ 3.368622] [drm] Radeon Display Connectors [ 3.368624] [drm] Connector 0: [ 3.368625] [drm] DP-1 [ 3.368627] [drm] HPD4 [ 3.368628] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 3.368630] [drm] Encoders: [ 3.368631] [drm] DFP1: INTERNAL_UNIPHY2 [ 3.368632] [drm] Connector 1: [ 3.368633] [drm] DP-2 [ 3.368634] [drm] HPD5 [ 3.368636] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 3.368636] [drm] Encoders: [ 3.368638] [drm] DFP2: INTERNAL_UNIPHY2 [ 3.368638] [drm] Connector 2: [ 3.368640] [drm] HDMI-A-1 [ 3.368640] [drm] HPD1 [ 3.368642] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 3.368643] [drm] Encoders: [ 3.368644] [drm] DFP3: INTERNAL_UNIPHY1 [ 3.368645] [drm] Connector 3: [ 3.368646] [drm] DVI-I-1 [ 3.368647] [drm] HPD6 [ 3.368648] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 3.368649] [drm] Encoders: [ 3.368650] [drm] DFP4: INTERNAL_UNIPHY [ 3.368651] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.368712] [drm] Internal thermal controller with fan control [ 3.368762] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0 [ 3.387185] usb 5-2.1: new low-speed USB device number 4 using ohci-pci [ 3.394439] init: samba-ad-dc main process (719) terminated with status 1 [ 3.425234] tg3 0000:04:00.0: irq 76 for MSI/MSI-X [ 3.425245] tg3 0000:04:00.0: irq 77 for MSI/MSI-X [ 3.425252] tg3 0000:04:00.0: irq 78 for MSI/MSI-X [ 3.425259] tg3 0000:04:00.0: irq 79 for MSI/MSI-X [ 3.425267] tg3 0000:04:00.0: irq 80 for MSI/MSI-X [ 3.493254] usb 5-2.1: New USB device found, idVendor=046d, idProduct=c221 [ 3.493258] usb 5-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.493260] usb 5-2.1: Product: Gaming Keyboard [ 3.500556] input: Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2.1/5-2.1:1.0/input/input14 [ 3.500665] hid-generic 0003:046D:C221.0003: input,hidraw2: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:13.0-2.1/input0 [ 3.511304] input: Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2.1/5-2.1:1.1/input/input15 [ 3.511465] hid-generic 0003:046D:C221.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:13.0-2.1/input1 [ 3.577865] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 3.578093] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 3.587226] usb 5-2.4: new full-speed USB device number 5 using ohci-pci [ 3.697201] usb 5-2.4: New USB device found, idVendor=046d, idProduct=c225 [ 3.697204] usb 5-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.697206] usb 5-2.4: Product: G11 Keyboard [ 3.707295] input: G11 Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2.4/5-2.4:1.0/input/input16 [ 3.707510] hid-generic 0003:046D:C225.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G11 Keyboard] on usb-0000:00:13.0-2.4/input0 [ 4.844134] [drm] radeon: dpm initialized [ 4.954801] [drm] fb mappable at 0xC1480000 [ 4.954804] [drm] vram apper at 0xC0000000 [ 4.954805] [drm] size 9216000 [ 4.954806] [drm] fb depth is 24 [ 4.954807] [drm] pitch is 7680 [ 4.954951] fbcon: radeondrmfb (fb0) is primary device [ 6.346036] audit_printk_skb: 123 callbacks suppressed [ 6.346037] type=1400 audit(1394776960.322:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=803 comm="apparmor_parser" [ 6.346042] type=1400 audit(1394776960.322:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=803 comm="apparmor_parser" [ 6.360280] Console: switching to colour frame buffer device 200x67 [ 6.364722] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 6.364723] radeon 0000:01:00.0: registered panic notifier [ 6.364734] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0 [ 6.364967] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 6.364970] hda-intel 0000:01:00.1: Using LPIB position fix [ 6.364973] hda-intel 0000:01:00.1: Force to non-snoop mode [ 6.365014] snd_hda_intel 0000:01:00.1: irq 81 for MSI/MSI-X [ 6.367226] hda-intel 0000:01:00.1: Enable sync_write for stable communication [ 6.368995] AMD IOMMUv2 driver by Joerg Roedel [ 6.368997] AMD IOMMUv2 functionality not available on this system [ 6.374166] HDMI ATI/AMD: no speaker allocation for ELD [ 6.374209] HDMI ATI/AMD: no speaker allocation for ELD [ 6.374254] HDMI ATI/AMD: no speaker allocation for ELD [ 6.374300] HDMI ATI/AMD: no speaker allocation for ELD [ 6.374348] HDMI ATI/AMD: no speaker allocation for ELD [ 6.374412] HDMI ATI/AMD: no speaker allocation for ELD [ 6.374490] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22 [ 6.374569] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21 [ 6.374641] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20 [ 6.374736] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19 [ 6.374810] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18 [ 6.374875] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17 [ 6.381920] type=1400 audit(1394776960.358:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=803 comm="apparmor_parser" [ 6.383419] type=1400 audit(1394776960.358:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=803 comm="apparmor_parser" [ 6.383428] type=1400 audit(1394776960.358:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=803 comm="apparmor_parser" [ 6.405629] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 6.405633] Disabling lock debugging due to kernel taint [ 6.410687] fglrx: module verification failed: signature and/or required key missing - tainting kernel [ 6.416243] <6>[fglrx] Maximum main memory to use for locked dma buffers: 15567 MBytes. [ 6.416642] <6>[fglrx] vendor: 1002 device: 6819 count: 1 [ 6.416949] <6>[fglrx] IOMMU is enabled, CrossFire are not supported on this platform [ 6.416950] <6>[fglrx] Disable IOMMU in BIOS options or kernel boot parameters to support CF [ 6.417350] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 6.417684] <6>[fglrx] Kernel PAT support is enabled [ 6.417699] <6>[fglrx] module loaded - fglrx 13.35.5 [Jan 29 2014] with 1 minors [ 6.422936] type=1400 audit(1394776960.398:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=803 comm="apparmor_parser" [ 6.423537] type=1400 audit(1394776960.398:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=803 comm="apparmor_parser" [ 6.441853] type=1400 audit(1394776960.418:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=803 comm="apparmor_parser" [ 6.442479] type=1400 audit(1394776960.418:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=803 comm="apparmor_parser"