[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-26-generic (buildd@lamiak) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #42-Ubuntu SMP Fri Mar 8 23:18:20 UTC 2013 (Ubuntu 3.5.0-26.42-generic 3.5.7.6) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-26-generic root=UUID=e32aa4dd-09dd-443f-a18d-ac20bdcce61c ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffcffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cffddfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cffde000-0x00000000cfffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: MSI MS-7250/MS-7250, BIOS 080014 05/18/2006 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xcffd0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcffcffff] [ 0.000000] [mem 0x00000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcffcffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xcffcffff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] RAMDISK: [mem 0x362cc000-0x3715dfff] [ 0.000000] ACPI: RSDP 00000000000f9840 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cffd0000 00034 (v01 A M I OEMRSDT 05000618 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cffd0200 00084 (v02 A M I OEMFACP 05000618 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cffd0440 061F0 (v01 1ADGH 1ADGH004 00000004 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cffde000 00040 [ 0.000000] ACPI: APIC 00000000cffd0390 00070 (v01 A M I OEMAPIC 05000618 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cffd0400 0003C (v01 A M I OEMMCFG 05000618 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffde040 00060 (v01 A M I AMI_OEM 05000618 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000cffcffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xcffcffff] [ 0.000000] NODE_DATA [mem 0xcffcc000-0xcffcffff] [ 0.000000] [ffffea0000000000-ffffea00033fffff] PMD -> [ffff8800cc200000-ffff8800cf5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xcffcffff] [ 0.000000] On node 0 totalpages: 851807 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13248 pages used for memmap [ 0.000000] DMA32 zone: 834576 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s83584 r8192 d22912 u1048576 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 838489 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-26-generic root=UUID=e32aa4dd-09dd-443f-a18d-ac20bdcce61c ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 39ac000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 3322980k/3407680k available (6708k kernel code, 452k absent, 84248k reserved, 6458k data, 932k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 13631488 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2211.305 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4422.61 BogoMIPS (lpj=8845220) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004040] Security Framework initialized [ 0.004061] AppArmor: AppArmor initialized [ 0.004062] Yama: becoming mindful. [ 0.004449] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009827] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010904] Mount-cache hash table entries: 256 [ 0.011152] Initializing cgroup subsys cpuacct [ 0.011155] Initializing cgroup subsys memory [ 0.011167] Initializing cgroup subsys devices [ 0.011169] Initializing cgroup subsys freezer [ 0.011171] Initializing cgroup subsys blkio [ 0.011173] Initializing cgroup subsys perf_event [ 0.011203] tseg: 0000000000 [ 0.011219] CPU: Physical Processor ID: 0 [ 0.011220] CPU: Processor Core ID: 0 [ 0.011222] mce: CPU supports 5 MCE banks [ 0.011229] LVT offset 0 assigned for vector 0xf9 [ 0.011235] using AMD E400 aware idle routine [ 0.012971] ACPI: Core revision 20120320 [ 0.016600] ftrace: allocating 25098 entries in 99 pages [ 0.028611] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.070636] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 [ 0.072003] Performance Events: AMD PMU driver. [ 0.072003] ... version: 0 [ 0.072003] ... bit width: 48 [ 0.072003] ... generic registers: 4 [ 0.072003] ... value mask: 0000ffffffffffff [ 0.072003] ... max period: 00007fffffffffff [ 0.072003] ... fixed-purpose events: 0 [ 0.072003] ... event mask: 000000000000000f [ 0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072003] Booting Node 0, Processors #1 Ok. [ 0.156070] Brought up 2 CPUs [ 0.156073] Total of 2 processors activated (8845.56 BogoMIPS). [ 0.156600] devtmpfs: initialized [ 0.158214] EVM: security.selinux [ 0.158216] EVM: security.SMACK64 [ 0.158217] EVM: security.capability [ 0.158238] PM: Registering ACPI NVS region [mem 0xcffde000-0xcfffffff] (139264 bytes) [ 0.160087] dummy: [ 0.160128] RTC time: 16:24:31, date: 03/14/13 [ 0.160176] NET: Registered protocol family 16 [ 0.160193] Trying to unpack rootfs image as initramfs... [ 0.160347] node 0 link 0: io port [1000, ffffff] [ 0.160351] node 0 link 0: io port [2000, 3fff] [ 0.160353] TOM: 00000000d0000000 aka 3328M [ 0.160356] node 0 link 0: mmio [e0000000, efffffff] [ 0.160360] node 0 link 0: mmio [a0000, bffff] [ 0.160362] node 0 link 0: mmio [d0000000, fe0bffff] [ 0.160364] bus: [00, ff] on node 0 link 0 [ 0.160367] bus: 00 [io 0x0000-0xffff] [ 0.160369] bus: 00 [mem 0xd0000000-0xfcffffffff] [ 0.160371] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.160430] ACPI: bus type pci registered [ 0.160500] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.160502] PCI: not using MMCONFIG [ 0.160504] PCI: Using configuration type 1 for base access [ 0.160677] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.160678] mtrr: probably your BIOS does not setup all CPUs. [ 0.160680] mtrr: corrected configuration. [ 0.162000] bio: create slab at 0 [ 0.162110] ACPI: Added _OSI(Module Device) [ 0.162113] ACPI: Added _OSI(Processor Device) [ 0.162115] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.162117] ACPI: Added _OSI(Processor Aggregator Device) [ 0.163116] ACPI: EC: Look up EC in DSDT [ 0.164325] ACPI: Executed 1 blocks of module-level executable AML code [ 0.167263] ACPI: Interpreter enabled [ 0.167267] ACPI: (supports S0 S1 S4 S5) [ 0.167289] ACPI: Using IOAPIC for interrupt routing [ 0.167311] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.168373] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.183981] ACPI: No dock devices found. [ 0.183991] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.184081] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.184201] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.184205] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.184208] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.184210] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.184213] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff] (ignored) [ 0.184215] PCI: root bus 00: hardware-probed resources [ 0.184257] PCI host bridge to bus 0000:00 [ 0.184263] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.184266] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfcffffffff] [ 0.184269] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.184292] pci 0000:00:00.0: [10de:0369] type 00 class 0x050000 [ 0.184462] pci 0000:00:01.0: [10de:0362] type 00 class 0x060100 [ 0.184484] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.184500] pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500 [ 0.184526] pci 0000:00:01.1: reg 20: [io 0x2d00-0x2d3f] [ 0.184532] pci 0000:00:01.1: reg 24: [io 0x2e00-0x2e3f] [ 0.184563] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.184582] pci 0000:00:01.2: [10de:036a] type 00 class 0x050000 [ 0.184626] pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310 [ 0.184635] pci 0000:00:02.0: reg 10: [mem 0xfeafb000-0xfeafbfff] [ 0.184665] pci 0000:00:02.0: supports D1 D2 [ 0.184668] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.184682] pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320 [ 0.184691] pci 0000:00:02.1: reg 10: [mem 0xfeafac00-0xfeafacff] [ 0.184722] pci 0000:00:02.1: supports D1 D2 [ 0.184724] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.184742] pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a [ 0.184759] pci 0000:00:04.0: reg 20: [io 0xffa0-0xffaf] [ 0.184785] pci 0000:00:05.0: [10de:037f] type 00 class 0x010185 [ 0.184794] pci 0000:00:05.0: reg 10: [io 0xd800-0xd807] [ 0.184799] pci 0000:00:05.0: reg 14: [io 0xd480-0xd483] [ 0.184804] pci 0000:00:05.0: reg 18: [io 0xd400-0xd407] [ 0.184809] pci 0000:00:05.0: reg 1c: [io 0xd080-0xd083] [ 0.184814] pci 0000:00:05.0: reg 20: [io 0xd000-0xd00f] [ 0.184819] pci 0000:00:05.0: reg 24: [mem 0xfeaf9000-0xfeaf9fff] [ 0.184849] pci 0000:00:05.1: [10de:037f] type 00 class 0x010185 [ 0.184858] pci 0000:00:05.1: reg 10: [io 0xcc00-0xcc07] [ 0.184863] pci 0000:00:05.1: reg 14: [io 0xc880-0xc883] [ 0.184868] pci 0000:00:05.1: reg 18: [io 0xc800-0xc807] [ 0.184872] pci 0000:00:05.1: reg 1c: [io 0xc480-0xc483] [ 0.184877] pci 0000:00:05.1: reg 20: [io 0xc400-0xc40f] [ 0.184883] pci 0000:00:05.1: reg 24: [mem 0xfeaf8000-0xfeaf8fff] [ 0.184912] pci 0000:00:05.2: [10de:037f] type 00 class 0x010185 [ 0.184921] pci 0000:00:05.2: reg 10: [io 0xc080-0xc087] [ 0.184926] pci 0000:00:05.2: reg 14: [io 0xc000-0xc003] [ 0.184931] pci 0000:00:05.2: reg 18: [io 0xbc00-0xbc07] [ 0.184936] pci 0000:00:05.2: reg 1c: [io 0xb880-0xb883] [ 0.184941] pci 0000:00:05.2: reg 20: [io 0xb800-0xb80f] [ 0.184947] pci 0000:00:05.2: reg 24: [mem 0xfeaf7000-0xfeaf7fff] [ 0.184979] pci 0000:00:06.0: [10de:0370] type 01 class 0x060401 [ 0.185014] pci 0000:00:06.1: [10de:0371] type 00 class 0x040300 [ 0.185025] pci 0000:00:06.1: reg 10: [mem 0xfeaf0000-0xfeaf3fff] [ 0.185061] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.185084] pci 0000:00:08.0: [10de:0373] type 00 class 0x068000 [ 0.185096] pci 0000:00:08.0: reg 10: [mem 0xfeaf6000-0xfeaf6fff] [ 0.185101] pci 0000:00:08.0: reg 14: [io 0xb480-0xb487] [ 0.185106] pci 0000:00:08.0: reg 18: [mem 0xfeafa800-0xfeafa8ff] [ 0.185111] pci 0000:00:08.0: reg 1c: [mem 0xfeafa400-0xfeafa40f] [ 0.185143] pci 0000:00:08.0: supports D1 D2 [ 0.185145] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185164] pci 0000:00:09.0: [10de:0373] type 00 class 0x068000 [ 0.185175] pci 0000:00:09.0: reg 10: [mem 0xfeaf5000-0xfeaf5fff] [ 0.185181] pci 0000:00:09.0: reg 14: [io 0xb400-0xb407] [ 0.185186] pci 0000:00:09.0: reg 18: [mem 0xfeafa000-0xfeafa0ff] [ 0.185191] pci 0000:00:09.0: reg 1c: [mem 0xfeaf4c00-0xfeaf4c0f] [ 0.185222] pci 0000:00:09.0: supports D1 D2 [ 0.185225] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185244] pci 0000:00:0b.0: [10de:0374] type 01 class 0x060400 [ 0.185272] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185288] pci 0000:00:0c.0: [10de:0374] type 01 class 0x060400 [ 0.185315] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185330] pci 0000:00:0d.0: [10de:0378] type 01 class 0x060400 [ 0.185357] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185373] pci 0000:00:0e.0: [10de:0375] type 01 class 0x060400 [ 0.185399] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185415] pci 0000:00:0f.0: [10de:0377] type 01 class 0x060400 [ 0.185442] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185465] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.185487] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.185504] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.185522] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.185583] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.185589] pci 0000:00:06.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.185592] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xfcffffffff] (subtractive decode) [ 0.185595] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.185617] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.185640] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.185663] pci 0000:00:0d.0: PCI bridge to [bus 04-04] [ 0.185687] pci 0000:00:0e.0: PCI bridge to [bus 05-05] [ 0.185723] pci 0000:06:00.0: [1002:6818] type 00 class 0x030000 [ 0.185736] pci 0000:06:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.185747] pci 0000:06:00.0: reg 18: [mem 0xfebc0000-0xfebfffff 64bit] [ 0.185754] pci 0000:06:00.0: reg 20: [io 0xe000-0xe0ff] [ 0.185767] pci 0000:06:00.0: reg 30: [mem 0xfeba0000-0xfebbffff pref] [ 0.185804] pci 0000:06:00.0: supports D1 D2 [ 0.185807] pci 0000:06:00.0: PME# supported from D1 D2 D3hot [ 0.185838] pci 0000:06:00.1: [1002:aab0] type 00 class 0x040300 [ 0.185851] pci 0000:06:00.1: reg 10: [mem 0xfeb9c000-0xfeb9ffff 64bit] [ 0.185912] pci 0000:06:00.1: supports D1 D2 [ 0.192030] pci 0000:00:0f.0: PCI bridge to [bus 06-06] [ 0.192035] pci 0000:00:0f.0: bridge window [io 0xe000-0xefff] [ 0.192038] pci 0000:00:0f.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.192042] pci 0000:00:0f.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.192054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.192255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.192346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.192378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.192409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.192440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.192471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.192504] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.192507] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.192509] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.199132] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.199222] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.199309] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.199396] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.199483] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.199569] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.199655] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10 [ 0.199741] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 0.199828] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7 [ 0.199914] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *5 [ 0.200001] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 0.200098] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.200185] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.200272] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.200359] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 [ 0.200445] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 0.200539] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5 [ 0.200643] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.200729] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10 [ 0.200875] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.200879] vgaarb: loaded [ 0.200881] vgaarb: bridge control possible 0000:06:00.0 [ 0.201114] SCSI subsystem initialized [ 0.201189] libata version 3.00 loaded. [ 0.201222] ACPI: bus type usb registered [ 0.201250] usbcore: registered new interface driver usbfs [ 0.201261] usbcore: registered new interface driver hub [ 0.201298] usbcore: registered new device driver usb [ 0.201396] PCI: Using ACPI for IRQ routing [ 0.206353] PCI: pci_cache_line_size set to 64 bytes [ 0.206439] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.206442] e820: reserve RAM buffer [mem 0xcffd0000-0xcfffffff] [ 0.206553] NetLabel: Initializing [ 0.206555] NetLabel: domain hash size = 128 [ 0.206556] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.206571] NetLabel: unlabeled traffic allowed by default [ 0.216792] AppArmor: AppArmor Filesystem Enabled [ 0.216830] pnp: PnP ACPI init [ 0.216850] ACPI: bus type pnp registered [ 0.216972] pnp 00:00: [bus 00-ff] [ 0.216975] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.216978] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.216981] pnp 00:00: [io 0x0d00-0xffff window] [ 0.216984] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.216986] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.216989] pnp 00:00: [mem 0xd0000000-0xfebfffff window] [ 0.217074] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.217093] pnp 00:01: [dma 4] [ 0.217095] pnp 00:01: [io 0x0000-0x000f] [ 0.217098] pnp 00:01: [io 0x0081-0x0083] [ 0.217100] pnp 00:01: [io 0x0087] [ 0.217103] pnp 00:01: [io 0x0089-0x008b] [ 0.217105] pnp 00:01: [io 0x008f] [ 0.217107] pnp 00:01: [io 0x00c0-0x00df] [ 0.217132] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.217144] pnp 00:02: [io 0x0070-0x0071] [ 0.217160] pnp 00:02: [irq 8] [ 0.217184] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.217194] pnp 00:03: [io 0x0061] [ 0.217215] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.217225] pnp 00:04: [io 0x00f0-0x00ff] [ 0.217233] pnp 00:04: [irq 13] [ 0.217260] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.218261] pnp 00:05: [mem 0x000d0000-0x000d3fff window] [ 0.218264] pnp 00:05: [mem 0x000d4000-0x000d7fff window] [ 0.218266] pnp 00:05: [mem 0x000de000-0x000dffff window] [ 0.218269] pnp 00:05: [io 0x0010-0x001f] [ 0.218271] pnp 00:05: [io 0x0022-0x003f] [ 0.218274] pnp 00:05: [io 0x0044-0x005f] [ 0.218276] pnp 00:05: [io 0x0062-0x0063] [ 0.218278] pnp 00:05: [io 0x0065-0x006f] [ 0.218281] pnp 00:05: [io 0x0072-0x007f] [ 0.218283] pnp 00:05: [io 0x0080] [ 0.218285] pnp 00:05: [io 0x0084-0x0086] [ 0.218288] pnp 00:05: [io 0x0088] [ 0.218290] pnp 00:05: [io 0x008c-0x008e] [ 0.218292] pnp 00:05: [io 0x0090-0x009f] [ 0.218295] pnp 00:05: [io 0x00a2-0x00bf] [ 0.218297] pnp 00:05: [io 0x00e0-0x00ef] [ 0.218300] pnp 00:05: [io 0x04d0-0x04d1] [ 0.218306] pnp 00:05: [io 0x0800-0x080f] [ 0.218308] pnp 00:05: [io 0x2000-0x207f] [ 0.218311] pnp 00:05: [io 0x2080-0x20ff] [ 0.218313] pnp 00:05: [io 0x2400-0x247f] [ 0.218315] pnp 00:05: [io 0x2480-0x24ff] [ 0.218318] pnp 00:05: [io 0x2800-0x287f] [ 0.218320] pnp 00:05: [io 0x2880-0x28ff] [ 0.218323] pnp 00:05: [io 0x2c00-0x2c7f] [ 0.218325] pnp 00:05: [io 0x2c80-0x2cff] [ 0.218328] pnp 00:05: [mem 0xfea80000-0xfeabffff] [ 0.218330] pnp 00:05: [mem 0xfee01000-0xfeefffff] [ 0.218431] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.218434] system 00:05: [io 0x0800-0x080f] has been reserved [ 0.218437] system 00:05: [io 0x2000-0x207f] has been reserved [ 0.218440] system 00:05: [io 0x2080-0x20ff] has been reserved [ 0.218443] system 00:05: [io 0x2400-0x247f] has been reserved [ 0.218446] system 00:05: [io 0x2480-0x24ff] has been reserved [ 0.218449] system 00:05: [io 0x2800-0x287f] has been reserved [ 0.218453] system 00:05: [io 0x2880-0x28ff] has been reserved [ 0.218456] system 00:05: [io 0x2c00-0x2c7f] has been reserved [ 0.218459] system 00:05: [io 0x2c80-0x2cff] has been reserved [ 0.218463] system 00:05: [mem 0x000d0000-0x000d3fff window] could not be reserved [ 0.218466] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.218469] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved [ 0.218472] system 00:05: [mem 0xfea80000-0xfeabffff] has been reserved [ 0.218476] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.218480] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218529] pnp 00:06: [mem 0xfec00000-0xfec00fff] [ 0.218531] pnp 00:06: [mem 0xfee00000-0xfee00fff] [ 0.218585] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.218588] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.218592] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218621] pnp 00:07: [io 0x0060] [ 0.218623] pnp 00:07: [io 0x0064] [ 0.218632] pnp 00:07: [irq 1] [ 0.218665] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.218777] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.218780] pnp 00:08: [io 0x0a00-0x0a0f] [ 0.218782] pnp 00:08: [io 0x0a10-0x0a1f] [ 0.218831] system 00:08: [io 0x0a00-0x0a0f] has been reserved [ 0.218834] system 00:08: [io 0x0a10-0x0a1f] has been reserved [ 0.218837] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218889] pnp 00:09: [mem 0xe0000000-0xefffffff] [ 0.218938] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.218942] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219117] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.219120] pnp 00:0a: [mem 0x000c0000-0x000cffff] [ 0.219123] pnp 00:0a: [mem 0x000e0000-0x000fffff] [ 0.219125] pnp 00:0a: [mem 0x00100000-0xcfffffff] [ 0.219128] pnp 00:0a: [mem 0xfec00000-0xffffffff] [ 0.219190] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.219193] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.219197] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.219200] system 00:0a: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.219203] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.219207] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.219508] pnp: PnP ACPI: found 11 devices [ 0.219510] ACPI: ACPI bus type pnp unregistered [ 0.225832] Switching to clocksource acpi_pm [ 0.226076] pci 0000:00:06.0: PCI bridge to [bus 01-01] [ 0.226083] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.226088] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.226093] pci 0000:00:0d.0: PCI bridge to [bus 04-04] [ 0.226099] pci 0000:00:0e.0: PCI bridge to [bus 05-05] [ 0.226104] pci 0000:00:0f.0: PCI bridge to [bus 06-06] [ 0.226108] pci 0000:00:0f.0: bridge window [io 0xe000-0xefff] [ 0.226111] pci 0000:00:0f.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.226115] pci 0000:00:0f.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.226125] pci 0000:00:06.0: setting latency timer to 64 [ 0.226139] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.226142] pci_bus 0000:00: resource 5 [mem 0xd0000000-0xfcffffffff] [ 0.226145] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.226148] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.226150] pci_bus 0000:01: resource 5 [mem 0xd0000000-0xfcffffffff] [ 0.226153] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.226156] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.226159] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.226162] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.226211] NET: Registered protocol family 2 [ 0.226356] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.227775] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.230267] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.230884] TCP: Hash tables configured (established 524288 bind 65536) [ 0.230888] TCP: reno registered [ 0.230903] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.230952] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.231081] NET: Registered protocol family 1 [ 0.231315] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 0.300163] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.300228] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300268] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300307] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300346] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300388] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300437] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300490] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300547] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300607] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300671] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300739] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300811] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.300830] pci 0000:06:00.0: Boot video device [ 0.300836] PCI: CLS 64 bytes, default 64 [ 0.309978] audit: initializing netlink socket (disabled) [ 0.310002] type=2000 audit(1363278271.304:1): initialized [ 0.336072] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.338147] VFS: Disk quotas dquot_6.5.2 [ 0.338201] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.338829] fuse init (API version 7.19) [ 0.338917] msgmni has been set to 6490 [ 0.339284] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.339314] io scheduler noop registered [ 0.339316] io scheduler deadline registered (default) [ 0.339350] io scheduler cfq registered [ 0.339518] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X [ 0.339589] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X [ 0.339649] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X [ 0.339713] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X [ 0.339771] pcieport 0000:00:0f.0: irq 44 for MSI/MSI-X [ 0.339842] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.339861] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.340037] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.340046] ACPI: Power Button [PWRB] [ 0.340096] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.340099] ACPI: Power Button [PWRF] [ 0.344229] GHES: HEST is not enabled! [ 0.344318] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.345498] Linux agpgart interface v0.103 [ 0.346993] brd: module loaded [ 0.347778] loop: module loaded [ 0.348039] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 0.348256] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 0.348302] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 0.348452] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 [ 0.348477] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 0.348625] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 23 [ 0.348641] pata_acpi 0000:00:05.2: setting latency timer to 64 [ 0.348979] Fixed MDIO Bus: probed [ 0.349031] tun: Universal TUN/TAP device driver, 1.6 [ 0.349033] tun: (C) 1999-2004 Max Krasnyansky [ 0.349085] PPP generic driver version 2.4.2 [ 0.349139] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.349181] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.349184] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.349192] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.349220] ehci_hcd 0000:00:02.1: debug port 1 [ 0.349226] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.349252] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeafac00 [ 0.360030] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.360058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.360061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.360064] usb usb1: Product: EHCI Host Controller [ 0.360067] usb usb1: Manufacturer: Linux 3.5.0-26-generic ehci_hcd [ 0.360069] usb usb1: SerialNumber: 0000:00:02.1 [ 0.360196] hub 1-0:1.0: USB hub found [ 0.360202] hub 1-0:1.0: 10 ports detected [ 0.360305] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.360338] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.360341] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.360347] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.360375] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfeafb000 [ 0.418035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.418038] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.418041] usb usb2: Product: OHCI Host Controller [ 0.418043] usb usb2: Manufacturer: Linux 3.5.0-26-generic ohci_hcd [ 0.418046] usb usb2: SerialNumber: 0000:00:02.0 [ 0.418154] hub 2-0:1.0: USB hub found [ 0.418161] hub 2-0:1.0: 10 ports detected [ 0.418255] uhci_hcd: USB Universal Host Controller Interface driver [ 0.418322] usbcore: registered new interface driver libusual [ 0.418362] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.418364] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.419021] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.419118] mousedev: PS/2 mouse device common for all mice [ 0.419242] rtc_cmos 00:02: RTC can wake from S4 [ 0.419387] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.419418] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.419510] device-mapper: uevent: version 1.0.3 [ 0.419579] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.419589] cpuidle: using governor ladder [ 0.419591] cpuidle: using governor menu [ 0.419593] EFI Variables Facility v0.08 2004-May-17 [ 0.419844] ashmem: initialized [ 0.419971] TCP: cubic registered [ 0.420124] NET: Registered protocol family 10 [ 0.420345] NET: Registered protocol family 17 [ 0.420357] Key type dns_resolver registered [ 0.420496] PM: Hibernation image not present or could not be loaded. [ 0.420512] registered taskstats version 1 [ 0.493255] Freeing initrd memory: 14920k freed [ 0.504574] Key type trusted registered [ 0.507361] Key type encrypted registered [ 0.510499] Magic number: 5:105:439 [ 0.510624] rtc_cmos 00:02: setting system clock to 2013-03-14 16:24:32 UTC (1363278272) [ 0.510697] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00) [ 0.510707] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 0.510707] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 0.510741] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.510742] EDD information not available. [ 0.512635] Freeing unused kernel memory: 932k freed [ 0.513099] Write protecting the kernel read-only data: 12288k [ 0.518310] Freeing unused kernel memory: 1472k freed [ 0.523079] Freeing unused kernel memory: 1136k freed [ 0.548201] udevd[87]: starting version 175 [ 0.606495] sata_nv 0000:00:05.0: version 3.5 [ 0.606519] sata_nv 0000:00:05.0: Using SWNCQ mode [ 0.606581] sata_nv 0000:00:05.0: setting latency timer to 64 [ 0.609345] scsi0 : sata_nv [ 0.610936] scsi1 : sata_nv [ 0.611138] ata1: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 21 [ 0.611142] ata2: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 21 [ 0.617377] sata_nv 0000:00:05.1: Using SWNCQ mode [ 0.617442] sata_nv 0000:00:05.1: setting latency timer to 64 [ 0.619392] scsi2 : sata_nv [ 0.621524] scsi3 : sata_nv [ 0.621721] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 20 [ 0.621724] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 20 [ 0.622165] sata_nv 0000:00:05.2: Using SWNCQ mode [ 0.622227] sata_nv 0000:00:05.2: setting latency timer to 64 [ 0.623961] scsi4 : sata_nv [ 0.628148] scsi5 : sata_nv [ 0.628356] ata5: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 23 [ 0.628360] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 23 [ 0.628464] pata_amd 0000:00:04.0: version 0.4.1 [ 0.628513] pata_amd 0000:00:04.0: setting latency timer to 64 [ 0.632105] scsi6 : pata_amd [ 0.632245] scsi7 : pata_amd [ 0.633373] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.633377] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.633835] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.634031] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 0.634040] forcedeth 0000:00:08.0: setting latency timer to 64 [ 0.784032] usb 1-3: new high-speed USB device number 3 using ehci_hcd [ 0.808417] ata7.00: HPA detected: current 156299375, native 156301488 [ 0.808426] ata7.00: ATA-5: ST380021A, 3.19, max UDMA/100 [ 0.808429] ata7.00: 156299375 sectors, multi 16: LBA [ 0.808438] ata7.01: ATAPI: Optiarc DVD RW AD-7200A, 1.09, max UDMA/66 [ 0.808445] ata7: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c50000) ACPI=0x3f01f (20:30:0x15) [ 0.808450] ata7: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc6c50000) ACPI=0x1f01f (20:30:0x15) [ 0.816328] ata7.00: configured for UDMA/100 [ 0.832217] ata7.01: configured for UDMA/66 [ 0.932021] ata3: SATA link down (SStatus 0 SControl 300) [ 0.940033] ata5: SATA link down (SStatus 0 SControl 300) [ 1.076033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.084191] ata1.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133 [ 1.084194] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.092188] ata1.00: configured for UDMA/133 [ 1.092363] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.5 PQ: 0 ANSI: 5 [ 1.092566] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.092790] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.092906] sd 0:0:0:0: [sda] Write Protect is off [ 1.092909] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.092929] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.093396] sda: sda1 sda2 [ 1.094220] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.133160] usb 1-3: New USB device found, idVendor=046d, idProduct=0825 [ 1.133167] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 1.133170] usb 1-3: SerialNumber: ADA27C10 [ 1.161430] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:72:61:3d [ 1.161436] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.161664] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 21 [ 1.161671] forcedeth 0000:00:09.0: setting latency timer to 64 [ 1.404032] ata2: SATA link down (SStatus 0 SControl 300) [ 1.685358] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x1c1 @ 1, addr 00:16:17:72:61:3e [ 1.685363] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.716034] ata4: SATA link down (SStatus 0 SControl 300) [ 1.988029] usb 2-2: new full-speed USB device number 2 using ohci_hcd [ 2.028028] ata6: SATA link down (SStatus 0 SControl 300) [ 2.028217] scsi 6:0:0:0: Direct-Access ATA ST380021A 3.19 PQ: 0 ANSI: 5 [ 2.028370] sd 6:0:0:0: [sdb] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.028401] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 2.028420] sd 6:0:0:0: [sdb] Write Protect is off [ 2.028424] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.028445] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.051563] sdb: sdb1 sdb2 sdb3 [ 2.052025] sd 6:0:0:0: [sdb] Attached SCSI disk [ 2.053688] scsi 6:0:1:0: CD-ROM Optiarc DVD RW AD-7200A 1.09 PQ: 0 ANSI: 5 [ 2.055966] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.055969] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.056103] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 2.056264] sr 6:0:1:0: Attached scsi generic sg2 type 5 [ 2.056347] ata8: port disabled--ignoring [ 2.209080] usb 2-2: New USB device found, idVendor=046d, idProduct=c318 [ 2.209087] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.209091] usb 2-2: Product: Logitech Illuminated Keyboard [ 2.209093] usb 2-2: Manufacturer: Logitech [ 2.229109] usbcore: registered new interface driver usbhid [ 2.229114] usbhid: USB HID core driver [ 2.231982] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2 [ 2.232143] hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:02.0-2/input0 [ 2.234337] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3 [ 2.235772] hid-generic 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:02.0-2/input1 [ 2.516033] usb 2-4: new full-speed USB device number 3 using ohci_hcd [ 2.697492] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.697498] EXT4-fs (sda2): write access will be enabled during recovery [ 2.738056] usb 2-4: New USB device found, idVendor=1532, idProduct=001c [ 2.738062] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.738066] usb 2-4: Product: Razer Abyssus [ 2.738068] usb 2-4: Manufacturer: Razer [ 2.854602] EXT4-fs (sda2): orphan cleanup on readonly fs [ 2.854615] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 660663 [ 2.857210] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 656976 [ 2.857230] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 660667 [ 2.857443] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 660666 [ 2.857459] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 558490 [ 2.857495] EXT4-fs (sda2): 5 orphan inodes deleted [ 2.857497] EXT4-fs (sda2): recovery complete [ 2.865179] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.866518] input: Razer Razer Abyssus as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input4 [ 2.866925] hid-generic 0003:1532:001C.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Abyssus] on usb-0000:00:02.0-4/input0 [ 3.168076] usb 2-6: new low-speed USB device number 4 using ohci_hcd [ 3.171991] Adding 4095996k swap on /dev/sdb2. Priority:-1 extents:1 across:4095996k [ 3.197071] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.197083] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 3.206589] udevd[356]: starting version 175 [ 3.261444] lp: driver loaded but no devices found [ 3.345215] i2c i2c-0: nForce2 SMBus adapter at 0x2d00 [ 3.345253] i2c i2c-1: nForce2 SMBus adapter at 0x2e00 [ 3.347320] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 3.347466] nv_tco: Watchdog reboot not detected [ 3.347559] nv_tco: initialized (0x2440). heartbeat=30 sec (nowayout=0) [ 3.402077] usb 2-6: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 [ 3.426108] usb 2-6: New USB device found, idVendor=073a, idProduct=2330 [ 3.426131] usb 2-6: New USB device strings: Mfr=2, Product=2, SerialNumber=2 [ 3.426136] usb 2-6: Product: www.tigerfly.net [ 3.426139] usb 2-6: Manufacturer: www.tigerfly.net [ 3.426141] usb 2-6: SerialNumber: www.tigerfly.net [ 3.472047] input: www.tigerfly.net www.tigerfly.net as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input5 [ 3.472309] hid-generic 0003:073A:2330.0004: input,hidraw3: USB HID v1.10 Keyboard [www.tigerfly.net www.tigerfly.net] on usb-0000:00:02.0-6/input0 [ 3.498891] type=1400 audit(1363271075.483:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=488 comm="apparmor_parser" [ 3.499362] type=1400 audit(1363271075.483:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=490 comm="apparmor_parser" [ 3.500184] type=1400 audit(1363271075.487:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=488 comm="apparmor_parser" [ 3.500491] type=1400 audit(1363271075.487:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=488 comm="apparmor_parser" [ 3.502365] type=1400 audit(1363271075.487:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=490 comm="apparmor_parser" [ 3.505525] type=1400 audit(1363271075.491:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=490 comm="apparmor_parser" [ 3.618887] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 3.623750] AMD IOMMUv2 driver by Joerg Roedel [ 3.623756] AMD IOMMUv2 functionality not available on this sytem [ 3.667908] Linux video capture interface: v2.00 [ 3.699722] uvcvideo: Found UVC 1.00 device (046d:0825) [ 3.701349] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 3.701358] hda_intel: Disabling MSI [ 3.701395] snd_hda_intel 0000:00:06.1: setting latency timer to 64 [ 3.702254] MCE: In-kernel MCE decoding enabled. [ 3.707925] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 3.707935] Disabling lock debugging due to kernel taint [ 3.716868] EDAC MC: Ver: 2.1.0 [ 3.723954] AMD64 EDAC driver v3.4.0 [ 3.729393] FS-Cache: Loaded [ 3.734835] FS-Cache: Netfs 'cifs' registered for caching [ 3.734976] Key type cifs.spnego registered [ 3.734991] Key type cifs.idmap registered [ 3.735261] CIFS: no cache= option specified, using "cache=loose". This default will change to "cache=strict" in 3.7. [ 3.756984] [fglrx] Maximum main memory to use for locked dma buffers: 3113 MBytes. [ 3.757166] [fglrx] vendor: 1002 device: 6818 count: 1 [ 3.757578] [fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 3.757764] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 3.757980] [fglrx] Kernel PAT support is enabled [ 3.758004] [fglrx] module loaded - fglrx 9.0.2 [Sep 20 2012] with 1 minors [ 3.762066] microcode: AMD CPU family 0xf not supported [ 3.765911] CIFS VFS: Error connecting to socket. Aborting operation [ 3.766410] CIFS VFS: cifs_mount failed w/return code = -101 [ 3.799314] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input6 [ 3.800170] usbcore: registered new interface driver uvcvideo [ 3.800177] USB Video Class driver (1.1.1) [ 3.876555] CIFS VFS: Error connecting to socket. Aborting operation [ 3.877470] CIFS VFS: cifs_mount failed w/return code = -101 [ 3.880617] microcode: AMD CPU family 0xf not supported [ 3.900392] kvm: Nested Virtualization enabled [ 3.934864] CIFS VFS: Error connecting to socket. Aborting operation [ 3.934932] CIFS VFS: cifs_mount failed w/return code = -101 [ 3.938397] Bluetooth: Core ver 2.16 [ 3.938431] NET: Registered protocol family 31 [ 3.938433] Bluetooth: HCI device and connection manager initialized [ 3.938436] Bluetooth: HCI socket layer initialized [ 3.938438] Bluetooth: L2CAP socket layer initialized [ 3.938444] Bluetooth: SCO socket layer initialized [ 3.955408] ppdev: user-space parallel port driver [ 3.955891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.955897] Bluetooth: BNEP filters: protocol multicast [ 3.966318] Bluetooth: RFCOMM TTY layer initialized [ 3.966329] Bluetooth: RFCOMM socket layer initialized [ 3.966331] Bluetooth: RFCOMM ver 1.11 [ 3.981938] type=1400 audit(1363271075.967:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=785 comm="apparmor_parser" [ 3.987538] type=1400 audit(1363271075.971:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=785 comm="apparmor_parser" [ 4.077524] CIFS VFS: Error connecting to socket. Aborting operation [ 4.077593] CIFS VFS: cifs_mount failed w/return code = -101 [ 4.129878] init: failsafe main process (803) killed by TERM signal [ 4.289407] type=1400 audit(1363271076.275:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=923 comm="apparmor_parser" [ 4.331867] forcedeth 0000:00:08.0: irq 45 for MSI/MSI-X [ 4.331905] forcedeth 0000:00:08.0: eth0: MSI enabled [ 4.353206] forcedeth 0000:00:09.0: irq 46 for MSI/MSI-X [ 4.353248] forcedeth 0000:00:09.0: eth1: MSI enabled [ 4.353468] forcedeth 0000:00:09.0: eth1: no link during initialization [ 4.355488] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4.356437] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4.555861] init: alsa-restore main process (999) terminated with status 19