[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-15-generic (buildd@akateko) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-1ubuntu1) ) #23-Ubuntu SMP Mon Sep 24 20:37:59 UTC 2012 (Ubuntu 3.5.0-15.23-generic 3.5.4) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff7ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bff8e7ff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bff8e800-0x00000000bffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: ASUSTeK Computer Inc. M51Vr /M51Vr , BIOS 211 11/17/2008 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 1GB, type UC [ 0.000000] total RAM covered: 4096M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff] [ 0.000000] [mem 0x00000000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x379fffff] page 2M [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: [mem 0x35596000-0x36ac2fff] [ 0.000000] ACPI: RSDP 000f9340 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT bff80100 00084 (v01 _ASUS_ Notebook 20081117 MSFT 00000097) [ 0.000000] ACPI: FACP bff80290 000F4 (v03 111708 FACP1455 20081117 MSFT 00000097) [ 0.000000] ACPI: DSDT bff80680 0B640 (v01 M51V0 M51V0210 00000210 INTL 20051117) [ 0.000000] ACPI: FACS bff8e800 00040 [ 0.000000] ACPI: APIC bff80390 0005C (v01 111708 APIC1455 20081117 MSFT 00000097) [ 0.000000] ACPI: MCFG bff80430 0003C (v01 111708 OEMMCFG 20081117 MSFT 00000097) [ 0.000000] ACPI: SLIC bff80470 00176 (v01 _ASUS_ Notebook 20081117 MSFT 00000097) [ 0.000000] ACPI: ECDT bff80620 00054 (v01 111708 OEMECDT 20081117 MSFT 00000097) [ 0.000000] ACPI: DBGP bff803f0 00034 (v01 111708 DBGP1455 20081117 MSFT 00000097) [ 0.000000] ACPI: BOOT bff805f0 00028 (v01 111708 BOOT1455 20081117 MSFT 00000097) [ 0.000000] ACPI: OEMB bff8e840 00071 (v01 111708 OEMB1455 20081117 MSFT 00000097) [ 0.000000] ACPI: HPET bff8bcc0 00038 (v01 111708 OEMHPET 20081117 MSFT 00000097) [ 0.000000] ACPI: DMAR bff8e8c0 00108 (v01 111708 DMAR1455 20081117 MSFT 00000097) [ 0.000000] ACPI: ATKG bff8ebd0 08024 (v01 022008 OEMATKG 20080220 MSFT 00000097) [ 0.000000] ACPI: SSDT bff97720 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4228MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x3fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbff7ffff] [ 0.000000] node 0: [mem 0x00000000-0x3fffffff] [ 0.000000] On node 0 totalpages: 1048335 [ 0.000000] free_area_init_node: node 0, pgdat c18a0880, node_mem_map f2d96200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8457 pages used for memmap [ 0.000000] HighMem zone: 811641 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000 [ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000 [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bcf000 s34176 r0 d23168 u57344 [ 0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038094 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-15-generic root=UUID=82d40851-257e-4290-bb50-c7463d24c29c ro nomodeset quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10485632 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00140000) [ 0.000000] Memory: 4108860k/5242880k available (5954k kernel code, 84480k reserved, 2931k data, 756k init, 3280392k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc18ae000 - 0xc196b000 ( 756 kB) [ 0.000000] .data : 0xc15d0a98 - 0xc18ad700 (2931 kB) [ 0.000000] .text : 0xc1000000 - 0xc15d0a98 (5954 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2161.342 MHz processor. [ 0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.68 BogoMIPS (lpj=8645368) [ 0.004005] pid_max: default: 32768 minimum: 301 [ 0.004029] Security Framework initialized [ 0.004043] AppArmor: AppArmor initialized [ 0.004044] Yama: becoming mindful. [ 0.004092] Mount-cache hash table entries: 512 [ 0.004312] Initializing cgroup subsys cpuacct [ 0.004315] Initializing cgroup subsys memory [ 0.004322] Initializing cgroup subsys devices [ 0.004324] Initializing cgroup subsys freezer [ 0.004325] Initializing cgroup subsys blkio [ 0.004327] Initializing cgroup subsys perf_event [ 0.004357] CPU: Physical Processor ID: 0 [ 0.004358] CPU: Processor Core ID: 0 [ 0.004361] mce: CPU supports 6 MCE banks [ 0.004367] CPU0: Thermal monitoring handled by SMI [ 0.004370] using mwait in idle threads. [ 0.008714] ACPI: Core revision 20120320 [ 0.016012] ftrace: allocating 24573 entries in 48 pages [ 0.028071] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028478] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068374] CPU0: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz stepping 0d [ 0.072003] APIC calibration not consistent with PM-Timer: 139ms instead of 100ms [ 0.072003] APIC delta adjusted to PM-Timer: 1039061 (1454670) [ 0.072003] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072003] PEBS disabled due to CPU errata. [ 0.072003] ... version: 2 [ 0.072003] ... bit width: 40 [ 0.072003] ... generic registers: 2 [ 0.072003] ... value mask: 000000ffffffffff [ 0.072003] ... max period: 000000007fffffff [ 0.072003] ... fixed-purpose events: 3 [ 0.072003] ... event mask: 0000000700000003 [ 0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072003] CPU 1 irqstacks, hard=f6ce2000 soft=f6ce4000 [ 0.072003] Booting Node 0, Processors #1 Ok. [ 0.008000] Initializing CPU#1 [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.080075] Brought up 2 CPUs [ 0.080080] Total of 2 processors activated (8645.36 BogoMIPS). [ 0.081000] devtmpfs: initialized [ 0.081000] EVM: security.selinux [ 0.081000] EVM: security.SMACK64 [ 0.081000] EVM: security.capability [ 0.081000] PM: Registering ACPI NVS region [mem 0xbff8e800-0xbffdffff] (333824 bytes) [ 0.081150] dummy: [ 0.081187] RTC time: 2:32:00, date: 09/25/12 [ 0.084013] NET: Registered protocol family 16 [ 0.084075] Trying to unpack rootfs image as initramfs... [ 0.084203] EISA bus registered [ 0.084306] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.084309] ACPI: bus type pci registered [ 0.084373] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.084376] PCI: not using MMCONFIG [ 0.084511] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.084608] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8 [ 0.084610] PCI: Using configuration type 1 for base access [ 0.100246] bio: create slab at 0 [ 0.100246] ACPI: Added _OSI(Module Device) [ 0.100246] ACPI: Added _OSI(Processor Device) [ 0.100246] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.100248] ACPI: Added _OSI(Processor Aggregator Device) [ 0.104540] ACPI: EC: EC description table is found, configuring boot EC [ 0.104548] ACPI: EC: Look up EC in DSDT [ 0.107919] ACPI: Executed 1 blocks of module-level executable AML code [ 0.110928] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.112105] ACPI Warning: Incorrect checksum in table [ATKG] - 0xEF, should be 0xE5 (20120320/tbutils-323) [ 0.112360] ACPI: SSDT bff96cd0 00248 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.113008] ACPI: Dynamic OEM Table Load: [ 0.113011] ACPI: SSDT (null) 00248 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.113167] ACPI: SSDT bff96fb0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.116327] ACPI: Dynamic OEM Table Load: [ 0.116331] ACPI: SSDT (null) 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.116583] ACPI: SSDT bff96c00 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.117222] ACPI: Dynamic OEM Table Load: [ 0.117225] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.117327] ACPI: SSDT bff96f20 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.117957] ACPI: Dynamic OEM Table Load: [ 0.117960] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.118230] ACPI: Interpreter enabled [ 0.118250] ACPI: (supports S0 S3 S4 S5) [ 0.118275] ACPI: Using IOAPIC for interrupt routing [ 0.118308] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.119873] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.119876] PCI: Using MMCONFIG for extended config space [ 0.166728] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62 [ 0.167045] ACPI: No dock devices found. [ 0.167055] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.167344] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.167492] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.167495] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.167498] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.167501] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.167503] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 0.167547] PCI host bridge to bus 0000:00 [ 0.167550] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.167553] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.167555] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.167558] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.167561] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 0.167574] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.167602] DMAR: Forcing write-buffer flush capability [ 0.167604] DMAR: Disabling IOMMU for graphics on this chipset [ 0.167638] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400 [ 0.167695] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.167755] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.167817] pci 0000:00:1a.0: reg 20: [io 0xbc00-0xbc1f] [ 0.167891] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.167951] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f] [ 0.168047] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.168109] pci 0000:00:1a.2: reg 20: [io 0xb800-0xb81f] [ 0.168195] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.168225] pci 0000:00:1a.7: reg 10: [mem 0xfdeffc00-0xfdefffff] [ 0.168353] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.168392] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.168415] pci 0000:00:1b.0: reg 10: [mem 0xfdef8000-0xfdefbfff 64bit] [ 0.168516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.168548] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.168654] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.168690] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.168797] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.168831] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.168935] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.168969] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.169074] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.169111] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 [ 0.169216] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.169253] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.169316] pci 0000:00:1d.0: reg 20: [io 0xb480-0xb49f] [ 0.169391] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.169451] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f] [ 0.169525] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.169587] pci 0000:00:1d.2: reg 20: [io 0xb080-0xb09f] [ 0.169676] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.169706] pci 0000:00:1d.7: reg 10: [mem 0xfdeff800-0xfdeffbff] [ 0.169833] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.169864] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.169958] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.170116] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f [ 0.170139] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007] [ 0.170150] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03] [ 0.170162] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887] [ 0.170174] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803] [ 0.170185] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa48f] [ 0.170197] pci 0000:00:1f.2: reg 24: [io 0xa400-0xa40f] [ 0.170278] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185 [ 0.170301] pci 0000:00:1f.5: reg 10: [io 0xa000-0xa007] [ 0.170313] pci 0000:00:1f.5: reg 14: [io 0x9c00-0x9c03] [ 0.170324] pci 0000:00:1f.5: reg 18: [io 0x9880-0x9887] [ 0.170336] pci 0000:00:1f.5: reg 1c: [io 0x9800-0x9803] [ 0.170348] pci 0000:00:1f.5: reg 20: [io 0x9480-0x948f] [ 0.170360] pci 0000:00:1f.5: reg 24: [io 0x9400-0x940f] [ 0.170476] pci 0000:01:00.0: [1002:95c4] type 00 class 0x030000 [ 0.170494] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.170507] pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff] [ 0.170521] pci 0000:01:00.0: reg 18: [mem 0xfdff0000-0xfdffffff] [ 0.170566] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.170625] pci 0000:01:00.0: supports D1 D2 [ 0.170660] pci 0000:01:00.1: [1002:aa28] type 00 class 0x040300 [ 0.170678] pci 0000:01:00.1: reg 10: [mem 0xfdfec000-0xfdfeffff] [ 0.170798] pci 0000:01:00.1: supports D1 D2 [ 0.176036] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.176043] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.176047] pci 0000:00:01.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.176053] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.176118] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.176220] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.176256] pci 0000:03:00.0: reg 10: [mem 0xfe8fe000-0xfe8fffff 64bit] [ 0.176433] pci 0000:03:00.0: PME# supported from D0 D3hot [ 0.184043] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.184051] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.184056] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfe8fffff] [ 0.184064] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfcefffff 64bit pref] [ 0.184126] pci 0000:00:1c.3: PCI bridge to [bus 05-05] [ 0.184224] pci 0000:06:00.0: [168c:002a] type 00 class 0x028000 [ 0.184256] pci 0000:06:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit] [ 0.184410] pci 0000:06:00.0: supports D1 [ 0.184413] pci 0000:06:00.0: PME# supported from D0 D1 D3hot [ 0.192040] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 0.192051] pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.192144] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 0.192167] pci 0000:07:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.192204] pci 0000:07:00.0: reg 18: [mem 0xfcfff000-0xfcffffff 64bit pref] [ 0.192228] pci 0000:07:00.0: reg 20: [mem 0xfcfe0000-0xfcfeffff 64bit pref] [ 0.192245] pci 0000:07:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref] [ 0.192336] pci 0000:07:00.0: supports D1 D2 [ 0.192338] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.200042] pci 0000:00:1c.5: PCI bridge to [bus 07-07] [ 0.200051] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.200056] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] [ 0.200064] pci 0000:00:1c.5: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref] [ 0.200119] pci 0000:08:01.0: [1180:0832] type 00 class 0x0c0010 [ 0.200148] pci 0000:08:01.0: reg 10: [mem 0xfebff800-0xfebfffff] [ 0.200264] pci 0000:08:01.0: PME# supported from D0 D3hot D3cold [ 0.200292] pci 0000:08:01.1: [1180:0822] type 00 class 0x080500 [ 0.200318] pci 0000:08:01.1: reg 10: [mem 0xfebff400-0xfebff4ff] [ 0.200435] pci 0000:08:01.1: supports D1 D2 [ 0.200438] pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.200468] pci 0000:08:01.2: [1180:0592] type 00 class 0x088000 [ 0.200494] pci 0000:08:01.2: reg 10: [mem 0xfebff000-0xfebff0ff] [ 0.200607] pci 0000:08:01.2: supports D1 D2 [ 0.200609] pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.200638] pci 0000:08:01.3: [1180:0852] type 00 class 0x088000 [ 0.200664] pci 0000:08:01.3: reg 10: [mem 0xfebfec00-0xfebfecff] [ 0.200777] pci 0000:08:01.3: supports D1 D2 [ 0.200780] pci 0000:08:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.200857] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode) [ 0.200865] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.200873] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.200876] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.200878] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.200881] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.200884] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.200925] pci_bus 0000:00: on NUMA node 0 [ 0.200935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.201173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.201216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.201264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.201348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.201393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.201425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.201456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.201634] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.201883] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.248634] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12) [ 0.248691] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 10 12) [ 0.248740] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [ 0.248786] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 12) [ 0.248835] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled. [ 0.248883] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12) [ 0.248935] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12) [ 0.248984] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12) [ 0.249117] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.249125] vgaarb: loaded [ 0.249127] vgaarb: bridge control possible 0000:01:00.0 [ 0.249363] SCSI subsystem initialized [ 0.249425] libata version 3.00 loaded. [ 0.249450] ACPI: bus type usb registered [ 0.249477] usbcore: registered new interface driver usbfs [ 0.249489] usbcore: registered new interface driver hub [ 0.249520] usbcore: registered new device driver usb [ 0.249628] PCI: Using ACPI for IRQ routing [ 0.249701] PCI: pci_cache_line_size set to 64 bytes [ 0.249845] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.249848] e820: reserve RAM buffer [mem 0xbff80000-0xbfffffff] [ 0.249962] NetLabel: Initializing [ 0.249964] NetLabel: domain hash size = 128 [ 0.249966] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.249978] NetLabel: unlabeled traffic allowed by default [ 0.250099] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.250106] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.250113] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.256202] Switching to clocksource hpet [ 0.265749] AppArmor: AppArmor Filesystem Enabled [ 0.265784] pnp: PnP ACPI init [ 0.265802] ACPI: bus type pnp registered [ 0.265940] pnp 00:00: [bus 00-ff] [ 0.265944] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.265947] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.265949] pnp 00:00: [io 0x0d00-0xffff window] [ 0.265952] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.265954] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.265957] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 0.265960] pnp 00:00: [mem 0x00000000-0xffffffff window] [ 0.266036] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.266047] pnp 00:01: [mem 0xfed10000-0xfed19fff] [ 0.266113] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.266117] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.266151] pnp 00:02: [dma 4] [ 0.266154] pnp 00:02: [io 0x0000-0x000f] [ 0.266156] pnp 00:02: [io 0x0081-0x0083] [ 0.266158] pnp 00:02: [io 0x0087] [ 0.266161] pnp 00:02: [io 0x0089-0x008b] [ 0.266163] pnp 00:02: [io 0x008f] [ 0.266165] pnp 00:02: [io 0x00c0-0x00df] [ 0.266192] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.266204] pnp 00:03: [io 0x0070-0x0071] [ 0.266218] pnp 00:03: [irq 8] [ 0.266246] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.266278] pnp 00:04: [io 0x0060] [ 0.266281] pnp 00:04: [io 0x0064] [ 0.266287] pnp 00:04: [irq 1] [ 0.266315] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.266365] pnp 00:05: [irq 12] [ 0.266400] pnp 00:05: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) [ 0.266411] pnp 00:06: [io 0x0061] [ 0.266438] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.266450] pnp 00:07: [io 0x00f0-0x00ff] [ 0.266456] pnp 00:07: [irq 13] [ 0.266484] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.266629] pnp 00:08: [io 0x0010-0x001f] [ 0.266632] pnp 00:08: [io 0x0022-0x003f] [ 0.266635] pnp 00:08: [io 0x0044-0x005f] [ 0.266637] pnp 00:08: [io 0x0063] [ 0.266639] pnp 00:08: [io 0x0065] [ 0.266641] pnp 00:08: [io 0x0067-0x006f] [ 0.266644] pnp 00:08: [io 0x0072-0x007f] [ 0.266646] pnp 00:08: [io 0x0080] [ 0.266648] pnp 00:08: [io 0x0084-0x0086] [ 0.266650] pnp 00:08: [io 0x0088] [ 0.266653] pnp 00:08: [io 0x008c-0x008e] [ 0.266655] pnp 00:08: [io 0x0090-0x009f] [ 0.266657] pnp 00:08: [io 0x00a2-0x00bf] [ 0.266659] pnp 00:08: [io 0x00e0-0x00ef] [ 0.266662] pnp 00:08: [io 0x04d0-0x04d1] [ 0.266664] pnp 00:08: [io 0x0800-0x087f] [ 0.266666] pnp 00:08: [io 0x0400-0x041f] [ 0.266669] pnp 00:08: [io 0x0500-0x057f] [ 0.266671] pnp 00:08: [mem 0xfdeff400-0xfdeff4ff window] [ 0.266674] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] [ 0.266676] pnp 00:08: [mem 0xfed20000-0xfed3ffff] [ 0.266679] pnp 00:08: [mem 0xfed45000-0xfed89fff] [ 0.266681] pnp 00:08: [mem 0xfed90000-0xfed90fff] [ 0.266684] pnp 00:08: [mem 0xfed91000-0xfed91fff] [ 0.266686] pnp 00:08: [mem 0xfed92000-0xfed92fff] [ 0.266688] pnp 00:08: [mem 0xfed93000-0xfed93fff] [ 0.266691] pnp 00:08: [mem 0xffb00000-0xffbfffff] [ 0.266693] pnp 00:08: [mem 0xfff00000-0xffffffff] [ 0.266789] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.266793] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.266796] system 00:08: [io 0x0400-0x041f] has been reserved [ 0.266799] system 00:08: [io 0x0500-0x057f] has been reserved [ 0.266802] system 00:08: [mem 0xfdeff400-0xfdeff4ff window] has been reserved [ 0.266805] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.266809] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.266812] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved [ 0.266815] system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved [ 0.266818] system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved [ 0.266821] system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved [ 0.266824] system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved [ 0.266827] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.266830] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved [ 0.266835] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.266898] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.266928] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.266982] pnp 00:0a: [mem 0xffa00000-0xffbfffff] [ 0.266985] pnp 00:0a: [mem 0xffe00000-0xffffffff] [ 0.267038] system 00:0a: [mem 0xffa00000-0xffbfffff] could not be reserved [ 0.267041] system 00:0a: [mem 0xffe00000-0xffffffff] could not be reserved [ 0.267045] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.267091] pnp 00:0b: [mem 0xffc00000-0xffdfffff] [ 0.267148] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.267151] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.267203] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.267206] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.267209] pnp 00:0c: [mem 0xfec10000-0xfec17fff] [ 0.267211] pnp 00:0c: [mem 0xfec20000-0xfec27fff] [ 0.267213] pnp 00:0c: [mem 0xfec28000-0xfec2ffff] [ 0.267216] pnp 00:0c: [mem 0xfec30000-0xfec37fff] [ 0.267218] pnp 00:0c: [mem 0xfec38000-0xfec3ffff] [ 0.267221] pnp 00:0c: [io 0x0250-0x0253] [ 0.267223] pnp 00:0c: [io 0x0256-0x025f] [ 0.267283] system 00:0c: [io 0x0250-0x0253] has been reserved [ 0.267287] system 00:0c: [io 0x0256-0x025f] has been reserved [ 0.267290] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.267293] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.267296] system 00:0c: [mem 0xfec10000-0xfec17fff] has been reserved [ 0.267299] system 00:0c: [mem 0xfec20000-0xfec27fff] has been reserved [ 0.267302] system 00:0c: [mem 0xfec28000-0xfec2ffff] has been reserved [ 0.267305] system 00:0c: [mem 0xfec30000-0xfec37fff] has been reserved [ 0.267309] system 00:0c: [mem 0xfec38000-0xfec3ffff] has been reserved [ 0.267312] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.267381] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 0.267438] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.267442] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.536695] Freeing initrd memory: 21684k freed [ 0.572308] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.572313] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 0.572315] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 0.572318] pnp 00:0e: [mem 0x00100000-0xbfffffff] [ 0.572321] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.572450] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.572454] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.572457] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.572460] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.572465] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.572616] pnp: PnP ACPI: found 15 devices [ 0.572618] ACPI: ACPI bus type pnp unregistered [ 0.572622] PnPBIOS: Disabled by ACPI PNP [ 0.609513] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000 [ 0.609519] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000 [ 0.609522] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000 [ 0.609542] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000 [ 0.609545] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000 [ 0.609548] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 05-05] add_size 200000 [ 0.609583] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.609586] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.609589] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.609592] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.609595] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.609597] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.609604] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] [ 0.609608] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.609611] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0400000-0xc05fffff] [ 0.609615] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.609619] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.609623] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff] [ 0.609627] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref] [ 0.609631] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.609634] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.609639] pci 0000:00:01.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.609643] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.609648] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.609652] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.609658] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 0.609664] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.609672] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.609675] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.609682] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfe8fffff] [ 0.609687] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfcefffff 64bit pref] [ 0.609695] pci 0000:00:1c.3: PCI bridge to [bus 05-05] [ 0.609698] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.609705] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc05fffff] [ 0.609710] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.609717] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 0.609724] pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.609734] pci 0000:00:1c.5: PCI bridge to [bus 07-07] [ 0.609738] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.609744] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] [ 0.609750] pci 0000:00:1c.5: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref] [ 0.609758] pci 0000:00:1e.0: PCI bridge to [bus 08-08] [ 0.609764] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.609797] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.609815] pci 0000:00:1c.3: enabling device (0104 -> 0107) [ 0.609842] pci 0000:00:1e.0: setting latency timer to 64 [ 0.609846] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.609849] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.609852] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.609854] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.609857] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff] [ 0.609859] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.609862] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.609865] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.609868] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.609870] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] [ 0.609873] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.609876] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.609878] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfe8fffff] [ 0.609881] pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfcefffff 64bit pref] [ 0.609884] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.609886] pci_bus 0000:05: resource 1 [mem 0xc0400000-0xc05fffff] [ 0.609889] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.609892] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.609894] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.609897] pci_bus 0000:07: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.609899] pci_bus 0000:07: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref] [ 0.609902] pci_bus 0000:08: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.609905] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 0.609907] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 0.609910] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 0.609912] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff] [ 0.609915] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xffffffff] [ 0.609954] NET: Registered protocol family 2 [ 0.610015] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.610174] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.610584] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.610874] TCP: Hash tables configured (established 131072 bind 65536) [ 0.610876] TCP: reno registered [ 0.610879] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.610891] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.610987] NET: Registered protocol family 1 [ 0.611274] pci 0000:01:00.0: Boot video device [ 0.611334] PCI: CLS 32 bytes, default 64 [ 0.611340] DMAR: Host address width 36 [ 0.611342] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.611350] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000 [ 0.611352] DMAR: DRHD base: 0x000000fed93000 flags: 0x1 [ 0.611358] IOMMU 1: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000 [ 0.611359] DMAR: RMRR base: 0x000000000e1000 end: 0x000000000e3fff [ 0.611362] DMAR: RMRR base: 0x000000bfff0000 end: 0x000000bfffffff [ 0.611452] Simple Boot Flag at 0x51 set to 0x1 [ 0.611875] audit: initializing netlink socket (disabled) [ 0.611887] type=2000 audit(1348540320.604:1): initialized [ 0.634096] highmem bounce pool size: 64 pages [ 0.634109] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.636387] VFS: Disk quotas dquot_6.5.2 [ 0.636438] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.637040] fuse init (API version 7.19) [ 0.637137] msgmni has been set to 1660 [ 0.637541] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.637570] io scheduler noop registered [ 0.637573] io scheduler deadline registered (default) [ 0.637581] io scheduler cfq registered [ 0.637764] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.637910] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.638071] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.638230] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.638387] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.638533] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X [ 0.638662] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.638664] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.638667] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 0.638671] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 0.638693] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.638699] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.638720] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.638723] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.638728] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.638750] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.638755] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.638777] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.638779] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 0.638784] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.638806] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 0.638808] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt [ 0.638813] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 0.638832] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.638904] pciehp: Using ACPI for slot detection. [ 0.638941] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 1043 ss_did 1877 [ 0.638965] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded [ 0.638983] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.639071] intel_idle: does not run on family 6 model 15 [ 0.639176] ACPI: AC Adapter [AC0] (on-line) [ 0.639250] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.639256] ACPI: Sleep Button [SLPB] [ 0.639299] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.643121] ACPI: Lid Switch [LID] [ 0.643171] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.643175] ACPI: Power Button [PWRF] [ 0.643264] ACPI: Requesting acpi_cpufreq [ 0.644038] Monitor-Mwait will be used to enter C-1 state [ 0.644071] Monitor-Mwait will be used to enter C-2 state [ 0.644092] Monitor-Mwait will be used to enter C-3 state [ 0.644097] Marking TSC unstable due to TSC halts in idle [ 0.644108] ACPI: acpi_idle registered with cpuidle [ 0.674325] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.674329] ACPI: Thermal Zone [THRM] (54 C) [ 0.674359] ACPI: Battery Slot [BAT0] (battery present) [ 0.674387] GHES: HEST is not enabled! [ 0.674470] isapnp: Scanning for PnP cards... [ 0.676089] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.677682] Linux agpgart interface v0.103 [ 0.679488] brd: module loaded [ 0.680319] loop: module loaded [ 0.680472] ata_piix 0000:00:1f.2: version 2.13 [ 0.680491] ata_piix 0000:00:1f.2: MAP [ [ 0.680493] P0 -- P1 -- ] [ 0.680545] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.680782] scsi0 : ata_piix [ 0.680857] scsi1 : ata_piix [ 0.681875] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 [ 0.681879] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 [ 0.681904] ata_piix 0000:00:1f.5: MAP [ [ 0.681906] P0 -- P1 -- ] [ 0.681940] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 0.681954] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.682177] scsi2 : ata_piix [ 0.682238] scsi3 : ata_piix [ 0.682277] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19 [ 0.682279] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19 [ 0.682622] Fixed MDIO Bus: probed [ 0.682673] tun: Universal TUN/TAP device driver, 1.6 [ 0.682675] tun: (C) 1999-2004 Max Krasnyansky [ 0.682726] PPP generic driver version 2.4.2 [ 0.682771] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.682812] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.682816] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.682823] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.682854] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.686732] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.686753] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdeffc00 [ 0.696021] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.696043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.696046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.696049] usb usb1: Product: EHCI Host Controller [ 0.696052] usb usb1: Manufacturer: Linux 3.5.0-15-generic ehci_hcd [ 0.696054] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.696167] hub 1-0:1.0: USB hub found [ 0.696172] hub 1-0:1.0: 6 ports detected [ 0.696281] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.696286] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.696292] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.696321] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.700196] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.700215] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdeff800 [ 0.712786] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.712804] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.712807] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.712809] usb usb2: Product: EHCI Host Controller [ 0.712812] usb usb2: Manufacturer: Linux 3.5.0-15-generic ehci_hcd [ 0.712814] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.712947] hub 2-0:1.0: USB hub found [ 0.712952] hub 2-0:1.0: 6 ports detected [ 0.713047] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.713073] uhci_hcd: USB Universal Host Controller Interface driver [ 0.713102] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.713106] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.713111] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.713152] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 [ 0.713187] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.713190] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.713192] usb usb3: Product: UHCI Host Controller [ 0.713195] usb usb3: Manufacturer: Linux 3.5.0-15-generic uhci_hcd [ 0.713197] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.713293] hub 3-0:1.0: USB hub found [ 0.713298] hub 3-0:1.0: 2 ports detected [ 0.713380] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.713384] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.713391] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.713429] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 0.713461] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.713464] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.713467] usb usb4: Product: UHCI Host Controller [ 0.713469] usb usb4: Manufacturer: Linux 3.5.0-15-generic uhci_hcd [ 0.713471] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.713582] hub 4-0:1.0: USB hub found [ 0.713586] hub 4-0:1.0: 2 ports detected [ 0.713667] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.713671] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.713676] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.713704] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800 [ 0.713737] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.713740] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.713742] usb usb5: Product: UHCI Host Controller [ 0.713744] usb usb5: Manufacturer: Linux 3.5.0-15-generic uhci_hcd [ 0.713747] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.713840] hub 5-0:1.0: USB hub found [ 0.713844] hub 5-0:1.0: 2 ports detected [ 0.713927] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.713931] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.713936] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.713962] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 [ 0.713997] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.714000] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.714003] usb usb6: Product: UHCI Host Controller [ 0.714005] usb usb6: Manufacturer: Linux 3.5.0-15-generic uhci_hcd [ 0.714007] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.714108] hub 6-0:1.0: USB hub found [ 0.714112] hub 6-0:1.0: 2 ports detected [ 0.714192] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.714196] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.714201] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.714227] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 0.714261] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.714264] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.714267] usb usb7: Product: UHCI Host Controller [ 0.714269] usb usb7: Manufacturer: Linux 3.5.0-15-generic uhci_hcd [ 0.714271] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.714363] hub 7-0:1.0: USB hub found [ 0.714368] hub 7-0:1.0: 2 ports detected [ 0.714446] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.714449] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.714456] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.714482] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080 [ 0.714514] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.714517] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.714519] usb usb8: Product: UHCI Host Controller [ 0.714521] usb usb8: Manufacturer: Linux 3.5.0-15-generic uhci_hcd [ 0.714524] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.714614] hub 8-0:1.0: USB hub found [ 0.714618] hub 8-0:1.0: 2 ports detected [ 0.714731] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.714737] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 [ 0.714901] xhci_hcd 0000:03:00.0: irq 18, io mem 0xfe8fe000 [ 0.714977] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.714983] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 0.714990] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 0.715083] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.715086] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.715088] usb usb9: Product: xHCI Host Controller [ 0.715091] usb usb9: Manufacturer: Linux 3.5.0-15-generic xhci_hcd [ 0.715093] usb usb9: SerialNumber: 0000:03:00.0 [ 0.715254] xHCI xhci_add_endpoint called for root hub [ 0.715256] xHCI xhci_check_bandwidth called for root hub [ 0.715283] hub 9-0:1.0: USB hub found [ 0.715292] hub 9-0:1.0: 2 ports detected [ 0.715364] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.715369] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10 [ 0.718246] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.718249] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.718252] usb usb10: Product: xHCI Host Controller [ 0.718254] usb usb10: Manufacturer: Linux 3.5.0-15-generic xhci_hcd [ 0.718257] usb usb10: SerialNumber: 0000:03:00.0 [ 0.718350] xHCI xhci_add_endpoint called for root hub [ 0.718352] xHCI xhci_check_bandwidth called for root hub [ 0.718379] hub 10-0:1.0: USB hub found [ 0.718390] hub 10-0:1.0: 2 ports detected [ 0.723758] ACPI: Battery Slot [BAT0] (battery present) [ 1.028665] isapnp: No Plug & Play device found [ 1.032105] usbcore: registered new interface driver libusual [ 1.032164] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.034827] i8042: Detected active multiplexing controller, rev 1.1 [ 1.038463] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.038468] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.038498] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.038521] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.038547] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.038682] mousedev: PS/2 mouse device common for all mice [ 1.038874] rtc_cmos 00:03: RTC can wake from S4 [ 1.039013] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.039043] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.039103] device-mapper: uevent: version 1.0.3 [ 1.039173] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.039213] EISA: Probing bus 0 at eisa.0 [ 1.039215] EISA: Cannot allocate resource for mainboard [ 1.039217] Cannot allocate resource for EISA slot 1 [ 1.039219] Cannot allocate resource for EISA slot 2 [ 1.039221] Cannot allocate resource for EISA slot 3 [ 1.039222] Cannot allocate resource for EISA slot 4 [ 1.039224] Cannot allocate resource for EISA slot 5 [ 1.039226] Cannot allocate resource for EISA slot 6 [ 1.039227] Cannot allocate resource for EISA slot 7 [ 1.039229] Cannot allocate resource for EISA slot 8 [ 1.039230] EISA: Detected 0 cards. [ 1.039286] cpuidle: using governor ladder [ 1.039350] cpuidle: using governor menu [ 1.039353] EFI Variables Facility v0.08 2004-May-17 [ 1.039589] ashmem: initialized [ 1.039738] TCP: cubic registered [ 1.039851] NET: Registered protocol family 10 [ 1.040061] NET: Registered protocol family 17 [ 1.040073] Key type dns_resolver registered [ 1.040166] Using IPI No-Shortcut mode [ 1.040303] PM: Hibernation image not present or could not be loaded. [ 1.040316] registered taskstats version 1 [ 1.043384] Key type trusted registered [ 1.045966] Key type encrypted registered [ 1.049119] Magic number: 12:583:511 [ 1.049239] rtc_cmos 00:03: setting system clock to 2012-09-25 02:32:01 UTC (1348540321) [ 1.049884] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.049886] EDD information not available. [ 1.078215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.137728] usb 2-2: new high-speed USB device number 3 using ehci_hcd [ 1.160081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.160202] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.168254] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR07, max UDMA/133 [ 1.168322] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133 [ 1.168325] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.184257] ata2.00: configured for UDMA/133 [ 1.184310] ata1.00: configured for UDMA/133 [ 1.184456] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5 [ 1.184596] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.184610] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.184660] sd 0:0:0:0: [sda] Write Protect is off [ 1.184664] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.184688] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.222714] sda: sda1 sda2 sda3 sda4 [ 1.223238] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.226370] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RR07 PQ: 0 ANSI: 5 [ 1.231494] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.231497] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.231627] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.231731] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.231900] Freeing unused kernel memory: 756k freed [ 1.232267] Write protecting the kernel text: 5956k [ 1.232297] Write protecting the kernel read-only data: 2424k [ 1.232298] NX-protecting the kernel data: 4284k [ 1.254729] udevd[108]: starting version 175 [ 1.285409] usb 2-2: New USB device found, idVendor=148f, idProduct=3070 [ 1.285414] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.285417] usb 2-2: Product: 802.11 n WLAN [ 1.285420] usb 2-2: Manufacturer: Ralink [ 1.285422] usb 2-2: SerialNumber: 1.0 [ 1.370843] acpi device:1d: registered as cooling_device2 [ 1.370877] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.370937] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input4 [ 1.381488] [drm] Initialized drm 1.1.0 20060810 [ 1.385684] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.385818] r8169 0000:07:00.0: irq 49 for MSI/MSI-X [ 1.386028] r8169 0000:07:00.0: eth0: RTL8168c/8111c at 0xf8416000, 00:24:8c:59:98:d7, XID 1c2000c0 IRQ 49 [ 1.386032] r8169 0000:07:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 1.395569] [drm] VGACON disable radeon kernel modesetting. [ 1.400039] usb 2-3: new high-speed USB device number 4 using ehci_hcd [ 1.413482] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.413487] [drm] No driver support for vblank timestamp query. [ 1.413491] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0 [ 1.418183] sdhci: Secure Digital Host Controller Interface driver [ 1.418187] sdhci: Copyright(c) Pierre Ossman [ 1.480065] firewire_ohci 0000:08:01.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 1.480388] sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 22) [ 1.481427] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.481457] mmc0: no vmmc regulator found [ 1.482453] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.482489] Registered led device: mmc0:: [ 1.512072] mmc0: SDHCI controller on PCI [0000:08:01.1] using DMA [ 1.541272] usb 2-3: New USB device found, idVendor=0421, idProduct=03cd [ 1.541276] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.541279] usb 2-3: Product: C7-00 [ 1.541281] usb 2-3: Manufacturer: Nokia [ 1.541283] usb 2-3: SerialNumber: 355379042653948 [ 1.542253] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.602222] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.657195] usb 2-5: new high-speed USB device number 5 using ehci_hcd [ 1.662227] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.722386] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.789152] usb 2-5: New USB device found, idVendor=04f2, idProduct=b033 [ 1.789156] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.789159] usb 2-5: Product: USB2.0 1.3M UVC WebCam [ 1.980161] firewire_core 0000:08:01.0: created device fw0: GUID 001e8c0001ac2639, S400 [ 2.028069] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 2.215021] usb 6-1: New USB device found, idVendor=046d, idProduct=c52b [ 2.215026] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.215029] usb 6-1: Product: USB Receiver [ 2.215031] usb 6-1: Manufacturer: Logitech [ 2.230073] usbcore: registered new interface driver usbhid [ 2.230077] usbhid: USB HID core driver [ 3.034370] vesafb: mode is 1152x864x32, linelength=4608, pages=0 [ 3.034374] vesafb: scrolling: redraw [ 3.034377] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 3.035155] vesafb: framebuffer at 0xd0000000, mapped to 0xf8800000, using 3904k, total 3904k [ 3.035292] Console: switching to colour frame buffer device 144x54 [ 3.035325] fb0: VESA VGA frame buffer device [ 3.183062] xor: automatically using best checksumming function: [ 3.220009] pIII_sse : 7919.000 MB/sec [ 3.220666] device-mapper: dm-raid45: initialized v0.2594b [ 3.322992] Btrfs loaded [ 3.460766] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.460770] EXT4-fs (sda1): write access will be enabled during recovery [ 5.195323] EXT4-fs (sda1): recovery complete [ 5.206171] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 23.121793] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.139571] udevd[459]: starting version 175 [ 23.209592] lp: driver loaded but no devices found [ 23.214817] Adding 5272572k swap on /dev/sda3. Priority:-1 extents:1 across:5272572k [ 23.282824] cfg80211: Calling CRDA to update world regulatory domain [ 23.300682] asus_laptop: Asus Laptop Support version 0.42 [ 23.300818] asus_laptop: M51Vr model detected [ 23.530874] NET: Registered protocol family 35 [ 23.586431] usbcore: registered new interface driver cdc_ether [ 23.610241] cdc_acm 2-3:1.1: ttyACM0: USB ACM device [ 23.610263] usbcore: registered new interface driver cdc_phonet [ 23.614693] cdc_acm 2-3:1.3: ttyACM1: USB ACM device [ 23.663697] usbcore: registered new interface driver cdc_acm [ 23.663702] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.664283] ACPI Warning: 0x00000830-0x00000833 SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 23.664291] ACPI Warning: 0x00000830-0x00000833 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMIE 2 (20120320/utaddress-251) [ 23.664296] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.664298] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 23.664302] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 23.664307] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.664310] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251) [ 23.664315] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.664316] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 23.665059] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input2 [ 23.670930] usbcore: registered new interface driver rndis_host [ 23.671611] usbcore: registered new interface driver rndis_wlan [ 23.708071] Linux video capture interface: v2.00 [ 23.736068] r852: driver loaded successfully [ 23.744152] r592: driver successfully loaded [ 23.744716] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam (04f2:b033) [ 23.752571] ath: EEPROM regdomain: 0x60 [ 23.752576] ath: EEPROM indicates we should expect a direct regpair map [ 23.752579] ath: Country alpha2 being used: 00 [ 23.752581] ath: Regpair used: 0x60 [ 23.753854] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 23.753858] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753860] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 23.753862] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753864] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 23.753866] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753868] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 23.753870] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753872] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 23.753874] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753876] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 23.753878] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753880] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 23.753882] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753884] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 23.753886] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753888] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 23.753890] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753892] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 23.753894] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753896] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 23.753898] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753900] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 23.753902] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753903] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 23.753906] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.753907] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 23.753909] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.769347] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 23.781392] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 23.782189] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.2/0003:046D:C52B.0003/input/input5 [ 23.782282] input: USB2.0 1.3M UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6 [ 23.782396] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 [ 23.782437] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 23.783020] usbcore: registered new interface driver uvcvideo [ 23.783023] USB Video Class driver (1.1.1) [ 23.783587] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:1d.0-1:1 [ 23.785819] input: Logitech Unifying Device. Wireless PID:1020 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.2/0003:046D:C52B.0003/input/input7 [ 23.786556] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1020] on usb-0000:00:1d.0-1:2 [ 23.800539] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 23.801120] Registered led device: ath9k-phy0 [ 23.801130] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf86c0000, irq=16 [ 23.863110] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 23.863299] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 23.863918] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client [ 23.864081] snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X [ 23.882030] asus_laptop: Backlight controlled by ACPI video driver [ 23.882126] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input10 [ 23.894907] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 23.907770] device-mapper: multipath: version 1.4.0 loaded [ 23.976430] usb 2-2: reset high-speed USB device number 3 using ehci_hcd [ 24.037755] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 24.146857] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 24.146863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146865] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 24.146867] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146869] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 24.146872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146873] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 24.146876] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146877] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 24.146879] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146881] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 24.146883] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146885] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 24.146887] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146889] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 24.146891] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146894] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 24.146896] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146898] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 24.146900] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146902] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 24.146904] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 24.146906] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 24.146908] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 24.146910] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 24.146912] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 24.146914] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 24.146916] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 24.147486] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 24.148147] Registered led device: rt2800usb-phy1::radio [ 24.148199] Registered led device: rt2800usb-phy1::assoc [ 24.148248] Registered led device: rt2800usb-phy1::quality [ 24.148393] usbcore: registered new interface driver rt2800usb [ 24.184569] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 24.184574] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184576] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 24.184578] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184580] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 24.184583] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184585] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 24.184587] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184589] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 24.184591] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184593] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 24.184595] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184597] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 24.184599] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184601] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 24.184603] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184605] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 24.184607] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184609] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 24.184611] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184613] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 24.184615] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184617] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 24.184619] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.184621] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 24.184623] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.184625] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 24.184627] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.184630] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 24.184633] cfg80211: World regulatory domain updated: [ 24.184635] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.184637] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184640] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.184642] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.184644] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.184646] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.283623] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 [ 24.286096] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 24.469605] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0 [ 24.510398] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 25.030772] init: failsafe main process (975) killed by TERM signal [ 25.132912] Bluetooth: Core ver 2.16 [ 25.138426] NET: Registered protocol family 31 [ 25.138431] Bluetooth: HCI device and connection manager initialized [ 25.138978] Bluetooth: HCI socket layer initialized [ 25.138982] Bluetooth: L2CAP socket layer initialized [ 25.138990] Bluetooth: SCO socket layer initialized [ 25.156137] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.156142] Bluetooth: BNEP filters: protocol multicast [ 25.159879] ppdev: user-space parallel port driver [ 25.182944] Bluetooth: RFCOMM TTY layer initialized [ 25.182951] Bluetooth: RFCOMM socket layer initialized [ 25.182953] Bluetooth: RFCOMM ver 1.11 [ 25.311312] type=1400 audit(1348540345.759:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1097 comm="apparmor_parser" [ 25.312356] type=1400 audit(1348540345.759:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1095 comm="apparmor_parser" [ 25.312816] type=1400 audit(1348540345.759:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1096 comm="apparmor_parser" [ 25.314984] type=1400 audit(1348540345.759:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1103 comm="apparmor_parser" [ 25.315974] type=1400 audit(1348540345.759:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1095 comm="apparmor_parser" [ 25.316146] type=1400 audit(1348540345.763:7): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1104 comm="apparmor_parser" [ 25.317933] type=1400 audit(1348540345.763:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1104 comm="apparmor_parser" [ 25.325712] type=1400 audit(1348540345.771:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1104 comm="apparmor_parser" [ 25.334749] type=1400 audit(1348540345.779:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1105 comm="apparmor_parser" [ 25.341432] type=1400 audit(1348540345.787:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1105 comm="apparmor_parser" [ 25.365559] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.377767] r8169 0000:07:00.0: eth0: link down [ 25.378023] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.378559] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.384510] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 25.817443] init: gdm main process (1252) killed by TERM signal