[ 0.000000] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-25-generic (buildd@lgw01-07) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #26-Ubuntu SMP Fri Jul 24 21:17:31 UTC 2015 (Ubuntu 3.19.0-25.26-generic 3.19.8-ckt2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic root=UUID=b48cca6b-a5d3-497d-819f-d199497e1ea7 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: System manufacturer P5K Premium/P5K Premium, BIOS 0204 06/26/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 120000000 mask FF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 3328MB, range: 256MB, type UC [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 0GB, range: 4GB, type WB [ 0.000000] reg 3, base: 4GB, range: 512MB, type WB [ 0.000000] reg 4, base: 4608MB, range: 256MB, type WB [ 0.000000] total RAM covered: 4096M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 4GB, range: 512MB, type WB [ 0.000000] reg 4, base: 4608MB, range: 256MB, type WB [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE [ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff] [ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M [ 0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x120000000-0x12fdfffff] [ 0.000000] [mem 0x120000000-0x12fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff] [ 0.000000] [mem 0x100000000-0x11fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff7ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcff7ffff] page 4k [ 0.000000] RAMDISK: [mem 0x35830000-0x36c0ffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FBB80 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x00000000CFF80000 00003C (v01 A_M_I_ OEMRSDT 06000726 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000CFF80200 000084 (v02 A_M_I_ OEMFACP 06000726 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000CFF805C0 008C4B (v01 A0840 A0840001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 0x00000000CFF8E000 000040 [ 0.000000] ACPI: APIC 0x00000000CFF80390 00006C (v01 A_M_I_ OEMAPIC 06000726 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000CFF80400 00003C (v01 A_M_I_ OEMMCFG 06000726 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000CFF8E040 000081 (v01 A_M_I_ AMI_OEM 06000726 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000CFF89210 000038 (v01 A_M_I_ OEMHPET 06000726 MSFT 00000097) [ 0.000000] ACPI: OSFR 0x00000000CFF89250 0000B0 (v01 A_M_I_ OEMOSFR 06000726 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x12fff7000-0x12fffbfff] [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x12fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xcff7ffff] [ 0.000000] node 0: [mem 0x100000000-0x12fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x12fffffff] [ 0.000000] On node 0 totalpages: 1048350 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13246 pages used for memmap [ 0.000000] DMA32 zone: 847744 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff80000-0xcff8dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff8e000-0xcffdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88012fc00000 s87104 r8192 d31680 u524288 [ 0.000000] pcpu-alloc: s87104 r8192 d31680 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031947 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic root=UUID=b48cca6b-a5d3-497d-819f-d199497e1ea7 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4024296K/4193400K available (8002K kernel code, 1232K rwdata, 3760K rodata, 1408K init, 1300K bss, 169104K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:456 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2405.464 MHz processor [ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4810.92 BogoMIPS (lpj=9621856) [ 0.004016] pid_max: default: 32768 minimum: 301 [ 0.004024] ACPI: Core revision 20141107 [ 0.012845] ACPI: All ACPI Tables successfully acquired [ 0.016030] Security Framework initialized [ 0.016053] AppArmor: AppArmor initialized [ 0.016054] Yama: becoming mindful. [ 0.016405] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.018102] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.020377] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.020389] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.020711] Initializing cgroup subsys memory [ 0.020721] Initializing cgroup subsys devices [ 0.020725] Initializing cgroup subsys freezer [ 0.020728] Initializing cgroup subsys net_cls [ 0.020732] Initializing cgroup subsys blkio [ 0.020735] Initializing cgroup subsys perf_event [ 0.020738] Initializing cgroup subsys net_prio [ 0.020742] Initializing cgroup subsys hugetlb [ 0.020768] CPU: Physical Processor ID: 0 [ 0.020769] CPU: Processor Core ID: 0 [ 0.020771] mce: CPU supports 6 MCE banks [ 0.020779] CPU0: Thermal monitoring enabled (TM2) [ 0.020783] process: using mwait in idle threads [ 0.020788] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.020882] Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000) [ 0.022211] ftrace: allocating 30087 entries in 118 pages [ 0.032456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072752] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b) [ 0.076000] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms [ 0.076000] APIC delta adjusted to PM-Timer: 1670451 (2004524) [ 0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.076000] perf_event_intel: PEBS disabled due to CPU errata [ 0.076000] ... version: 2 [ 0.076000] ... bit width: 40 [ 0.076000] ... generic registers: 2 [ 0.076000] ... value mask: 000000ffffffffff [ 0.076000] ... max period: 000000007fffffff [ 0.076000] ... fixed-purpose events: 3 [ 0.076000] ... event mask: 0000000700000003 [ 0.076000] x86: Booting SMP configuration: [ 0.076000] .... node #0, CPUs: #1 [ 0.008000] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [ 0.090223] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.090359] #2 [ 0.008000] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [ 0.110692] #3 [ 0.008000] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [ 0.128013] x86: Booted up 1 node, 4 CPUs [ 0.128017] smpboot: Total of 4 processors activated (19243.71 BogoMIPS) [ 0.132168] devtmpfs: initialized [ 0.137221] evm: security.selinux [ 0.137223] evm: security.SMACK64 [ 0.137224] evm: security.SMACK64EXEC [ 0.137226] evm: security.SMACK64TRANSMUTE [ 0.137227] evm: security.SMACK64MMAP [ 0.137228] evm: security.ima [ 0.137229] evm: security.capability [ 0.137247] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes) [ 0.137247] pinctrl core: initialized pinctrl subsystem [ 0.137247] RTC time: 22:43:52, date: 08/12/15 [ 0.137247] NET: Registered protocol family 16 [ 0.140009] cpuidle: using governor ladder [ 0.144009] cpuidle: using governor menu [ 0.144078] ACPI: bus type PCI registered [ 0.144081] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.144189] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.144191] PCI: not using MMCONFIG [ 0.144193] PCI: Using configuration type 1 for base access [ 0.152152] ACPI: Added _OSI(Module Device) [ 0.152154] ACPI: Added _OSI(Processor Device) [ 0.152156] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152161] ACPI: Added _OSI(Processor Aggregator Device) [ 0.154227] ACPI: Executed 1 blocks of module-level executable AML code [ 0.157891] ACPI: Dynamic OEM Table Load: [ 0.157897] ACPI: SSDT 0xFFFF88012A62B800 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.158315] ACPI: Dynamic OEM Table Load: [ 0.158320] ACPI: SSDT 0xFFFF88012A62BA00 000143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.158721] ACPI: Dynamic OEM Table Load: [ 0.158726] ACPI: SSDT 0xFFFF88012A62BC00 000143 (v01 AMI CPU3PM 00000001 INTL 20060113) [ 0.159131] ACPI: Dynamic OEM Table Load: [ 0.159136] ACPI: SSDT 0xFFFF88012A62BE00 000143 (v01 AMI CPU4PM 00000001 INTL 20060113) [ 0.159536] ACPI: Interpreter enabled [ 0.159546] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.159560] ACPI: (supports S0 S1 S3 S4 S5) [ 0.159562] ACPI: Using IOAPIC for interrupt routing [ 0.159582] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.160025] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.160475] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.167057] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.167063] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.167068] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.167159] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.167162] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.167164] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.167166] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.167169] acpi PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff] (ignored) [ 0.167171] PCI: root bus 00: using default resources [ 0.167326] PCI host bridge to bus 0000:00 [ 0.167330] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.167332] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.167334] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.167343] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.167446] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.167488] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.167528] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.167597] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.167637] pci 0000:00:1a.0: reg 0x20: [io 0xb800-0xb81f] [ 0.167722] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.167772] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.167812] pci 0000:00:1a.1: reg 0x20: [io 0xb880-0xb89f] [ 0.167896] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.167947] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.167986] pci 0000:00:1a.2: reg 0x20: [io 0xbc00-0xbc1f] [ 0.168070] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.168127] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.168147] pci 0000:00:1a.7: reg 0x10: [mem 0xfe7ffc00-0xfe7fffff] [ 0.168234] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.168276] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.168329] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.168345] pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit] [ 0.168414] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.168498] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.168568] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.168613] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.168664] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.168734] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.168777] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.168825] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 [ 0.168896] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.168939] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.168989] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.169028] pci 0000:00:1d.0: reg 0x20: [io 0xb080-0xb09f] [ 0.169113] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.169162] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.169202] pci 0000:00:1d.1: reg 0x20: [io 0xb400-0xb41f] [ 0.169284] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.169336] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.169375] pci 0000:00:1d.2: reg 0x20: [io 0xb480-0xb49f] [ 0.169458] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.169515] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.169536] pci 0000:00:1d.7: reg 0x10: [mem 0xfe7ff800-0xfe7ffbff] [ 0.169632] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.169678] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.169726] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.169806] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.169857] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100 [ 0.169933] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI PM1a_EVT_BLK [io 0x0800-0x0803] [ 0.169938] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.169942] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.170046] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f [ 0.170060] pci 0000:00:1f.2: reg 0x10: [io 0xa000-0xa007] [ 0.170068] pci 0000:00:1f.2: reg 0x14: [io 0x9c00-0x9c03] [ 0.170076] pci 0000:00:1f.2: reg 0x18: [io 0x9880-0x9887] [ 0.170084] pci 0000:00:1f.2: reg 0x1c: [io 0x9800-0x9803] [ 0.170091] pci 0000:00:1f.2: reg 0x20: [io 0x9480-0x948f] [ 0.170099] pci 0000:00:1f.2: reg 0x24: [io 0x9400-0x940f] [ 0.170203] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.170217] pci 0000:00:1f.3: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff 64bit] [ 0.170237] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.170326] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185 [ 0.170340] pci 0000:00:1f.5: reg 0x10: [io 0xb000-0xb007] [ 0.170348] pci 0000:00:1f.5: reg 0x14: [io 0xac00-0xac03] [ 0.170356] pci 0000:00:1f.5: reg 0x18: [io 0xa880-0xa887] [ 0.170363] pci 0000:00:1f.5: reg 0x1c: [io 0xa800-0xa803] [ 0.170371] pci 0000:00:1f.5: reg 0x20: [io 0xa480-0xa48f] [ 0.170379] pci 0000:00:1f.5: reg 0x24: [io 0xa400-0xa40f] [ 0.170531] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000 [ 0.170546] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.170557] pci 0000:01:00.0: reg 0x18: [mem 0xfe8c0000-0xfe8dffff 64bit] [ 0.170564] pci 0000:01:00.0: reg 0x20: [io 0xc000-0xc0ff] [ 0.170577] pci 0000:01:00.0: reg 0x30: [mem 0xfe8a0000-0xfe8bffff pref] [ 0.170614] pci 0000:01:00.0: supports D1 D2 [ 0.170667] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300 [ 0.170682] pci 0000:01:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit] [ 0.170745] pci 0000:01:00.1: supports D1 D2 [ 0.170808] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.170811] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.170815] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.170819] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.170875] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.170883] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.170981] pci 0000:03:00.0: [197b:2363] type 00 class 0x010601 [ 0.171068] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff] [ 0.171082] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref] [ 0.171138] pci 0000:03:00.0: PME# supported from D3hot [ 0.171215] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 0.171239] pci 0000:03:00.1: reg 0x10: [io 0xec00-0xec07] [ 0.171253] pci 0000:03:00.1: reg 0x14: [io 0xe880-0xe883] [ 0.171266] pci 0000:03:00.1: reg 0x18: [io 0xe800-0xe807] [ 0.171279] pci 0000:03:00.1: reg 0x1c: [io 0xe480-0xe483] [ 0.171293] pci 0000:03:00.1: reg 0x20: [io 0xe400-0xe40f] [ 0.171415] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.171425] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.171429] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.171433] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.171513] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000 [ 0.171537] pci 0000:02:00.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 0.171549] pci 0000:02:00.0: reg 0x18: [io 0xd800-0xd8ff] [ 0.171590] pci 0000:02:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref] [ 0.171661] pci 0000:02:00.0: supports D1 D2 [ 0.171663] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176022] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.176028] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.176034] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.176108] pci 0000:05:03.0: [11c1:5811] type 00 class 0x0c0010 [ 0.176128] pci 0000:05:03.0: reg 0x10: [mem 0xfebff000-0xfebfffff] [ 0.176212] pci 0000:05:03.0: supports D1 D2 [ 0.176216] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot [ 0.176311] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.176316] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.176322] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.176324] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.177219] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.177273] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.177325] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.177376] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.177427] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.177482] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.177533] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.177584] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.177653] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.177751] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.177751] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.177751] vgaarb: loaded [ 0.177751] vgaarb: bridge control possible 0000:01:00.0 [ 0.177751] SCSI subsystem initialized [ 0.177751] libata version 3.00 loaded. [ 0.177751] ACPI: bus type USB registered [ 0.177751] usbcore: registered new interface driver usbfs [ 0.177751] usbcore: registered new interface driver hub [ 0.177751] usbcore: registered new device driver usb [ 0.177751] PCI: Using ACPI for IRQ routing [ 0.183941] PCI: pci_cache_line_size set to 64 bytes [ 0.184000] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.184002] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff] [ 0.184132] NetLabel: Initializing [ 0.184134] NetLabel: domain hash size = 128 [ 0.184135] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.184150] NetLabel: unlabeled traffic allowed by default [ 0.184180] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.184180] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.184180] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.186094] Switched to clocksource hpet [ 0.192129] AppArmor: AppArmor Filesystem Enabled [ 0.192218] pnp: PnP ACPI init [ 0.192323] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.192329] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.192406] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.192571] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.192575] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.192735] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.192738] system 00:03: [io 0x0800-0x087f] could not be reserved [ 0.192741] system 00:03: [io 0x0480-0x04bf] has been reserved [ 0.192743] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.192746] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.192748] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.192751] system 00:03: [mem 0xffa00000-0xffafffff] has been reserved [ 0.192753] system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.192756] system 00:03: [mem 0xffe00000-0xffefffff] has been reserved [ 0.192758] system 00:03: [mem 0xfff00000-0xfffffffe] has been reserved [ 0.192762] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.192990] pnp 00:04: [dma 0 disabled] [ 0.193047] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.193135] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.193138] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.193141] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.193197] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.193272] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.193275] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.193729] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.193732] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.193735] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.193738] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.193741] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.193855] pnp: PnP ACPI: found 9 devices [ 0.202046] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.202051] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 [ 0.202059] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.202067] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.202078] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment [ 0.202082] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.202084] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.202087] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.202089] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.202095] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff] [ 0.202100] pci 0000:00:1c.4: BAR 15: assigned [mem 0x130000000-0x1301fffff 64bit pref] [ 0.202103] pci 0000:00:1c.5: BAR 15: assigned [mem 0x130200000-0x1303fffff 64bit pref] [ 0.202107] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.202110] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.202112] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.202116] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.202119] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.202123] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.202126] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.202131] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff] [ 0.202135] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.202140] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.202143] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.202148] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.202151] pci 0000:00:1c.4: bridge window [mem 0x130000000-0x1301fffff 64bit pref] [ 0.202157] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.202160] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.202164] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.202168] pci 0000:00:1c.5: bridge window [mem 0x130200000-0x1303fffff 64bit pref] [ 0.202174] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.202178] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.202186] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.202188] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.202190] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.202193] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.202195] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.202197] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.202199] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff] [ 0.202201] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.202204] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.202206] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.202208] pci_bus 0000:03: resource 2 [mem 0x130000000-0x1301fffff 64bit pref] [ 0.202210] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.202212] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.202214] pci_bus 0000:02: resource 2 [mem 0x130200000-0x1303fffff 64bit pref] [ 0.202217] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.202219] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.202221] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff] [ 0.202249] NET: Registered protocol family 2 [ 0.202484] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.202607] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.202771] TCP: Hash tables configured (established 32768 bind 32768) [ 0.202809] TCP: reno registered [ 0.202817] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.202844] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.202915] NET: Registered protocol family 1 [ 0.203858] pci 0000:01:00.0: Video device with shadowed ROM [ 0.203872] PCI: CLS 32 bytes, default 64 [ 0.203943] Trying to unpack rootfs image as initramfs... [ 0.567771] Freeing initrd memory: 20352K (ffff880035830000 - ffff880036c10000) [ 0.567788] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.567791] software IO TLB [mem 0xcbf80000-0xcff80000] (64MB) mapped at [ffff8800cbf80000-ffff8800cff7ffff] [ 0.568162] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xba [ 0.568168] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xba [ 0.568182] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xba [ 0.568197] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xba [ 0.568294] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.568353] Scanning for low memory corruption every 60 seconds [ 0.568691] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.568713] Initialise system trusted keyring [ 0.568736] audit: initializing netlink subsys (disabled) [ 0.568760] audit: type=2000 audit(1439419431.568:1): initialized [ 0.569168] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.571185] zpool: loaded [ 0.571189] zbud: loaded [ 0.571411] VFS: Disk quotas dquot_6.5.2 [ 0.571475] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.572168] fuse init (API version 7.23) [ 0.572339] Key type big_key registered [ 0.572926] Key type asymmetric registered [ 0.572931] Asymmetric key parser 'x509' registered [ 0.572985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.573047] io scheduler noop registered [ 0.573055] io scheduler deadline registered (default) [ 0.573114] io scheduler cfq registered [ 0.573430] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.573812] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.573831] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.573872] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 0.573874] vesafb: scrolling: redraw [ 0.573876] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.577077] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 5120k, total 5120k [ 0.577218] Console: switching to colour frame buffer device 160x64 [ 0.577251] fb0: VESA VGA frame buffer device [ 0.577281] intel_idle: does not run on family 6 model 15 [ 0.577379] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.577383] ACPI: Power Button [PWRB] [ 0.577434] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.577437] ACPI: Power Button [PWRF] [ 0.577739] GHES: HEST is not enabled! [ 0.577867] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.598213] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.600087] Linux agpgart interface v0.103 [ 0.601783] brd: module loaded [ 0.602594] loop: module loaded [ 0.602762] ata_piix 0000:00:1f.2: version 2.13 [ 0.602847] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.603827] scsi host0: ata_piix [ 0.604012] scsi host1: ata_piix [ 0.604069] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22 [ 0.604074] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22 [ 0.604144] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.605049] scsi host2: ata_piix [ 0.605182] scsi host3: ata_piix [ 0.605232] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22 [ 0.605235] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22 [ 0.605358] libphy: Fixed MDIO Bus: probed [ 0.605361] tun: Universal TUN/TAP device driver, 1.6 [ 0.605363] tun: (C) 1999-2004 Max Krasnyansky [ 0.605420] PPP generic driver version 2.4.2 [ 0.605507] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.605512] ehci-pci: EHCI PCI platform driver [ 0.605606] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.605614] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.605626] ehci-pci 0000:00:1a.7: debug port 1 [ 0.609525] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 0.609539] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00 [ 0.620030] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.620095] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.620099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.620102] usb usb1: Product: EHCI Host Controller [ 0.620105] usb usb1: Manufacturer: Linux 3.19.0-25-generic ehci_hcd [ 0.620109] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.620267] hub 1-0:1.0: USB hub found [ 0.620276] hub 1-0:1.0: 6 ports detected [ 0.620520] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.620527] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.620538] ehci-pci 0000:00:1d.7: debug port 1 [ 0.624447] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.624459] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800 [ 0.636025] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.636079] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.636083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.636086] usb usb2: Product: EHCI Host Controller [ 0.636090] usb usb2: Manufacturer: Linux 3.19.0-25-generic ehci_hcd [ 0.636093] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.636244] hub 2-0:1.0: USB hub found [ 0.636251] hub 2-0:1.0: 6 ports detected [ 0.636420] ehci-platform: EHCI generic platform driver [ 0.636431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.636436] ohci-pci: OHCI PCI platform driver [ 0.636449] ohci-platform: OHCI generic platform driver [ 0.636459] uhci_hcd: USB Universal Host Controller Interface driver [ 0.636532] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.636538] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.636544] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.636569] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 0.636612] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.636615] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.636617] usb usb3: Product: UHCI Host Controller [ 0.636619] usb usb3: Manufacturer: Linux 3.19.0-25-generic uhci_hcd [ 0.636621] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.636732] hub 3-0:1.0: USB hub found [ 0.636739] hub 3-0:1.0: 2 ports detected [ 0.636900] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.636906] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.636912] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.636936] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 0.636979] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.636982] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.636984] usb usb4: Product: UHCI Host Controller [ 0.636986] usb usb4: Manufacturer: Linux 3.19.0-25-generic uhci_hcd [ 0.636988] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.637099] hub 4-0:1.0: USB hub found [ 0.637106] hub 4-0:1.0: 2 ports detected [ 0.637261] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.637268] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.637274] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.637290] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 [ 0.637334] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.637337] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.637339] usb usb5: Product: UHCI Host Controller [ 0.637341] usb usb5: Manufacturer: Linux 3.19.0-25-generic uhci_hcd [ 0.637344] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.637454] hub 5-0:1.0: USB hub found [ 0.637461] hub 5-0:1.0: 2 ports detected [ 0.637619] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.637625] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.637631] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.637648] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 0.637698] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.637700] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.637703] usb usb6: Product: UHCI Host Controller [ 0.637705] usb usb6: Manufacturer: Linux 3.19.0-25-generic uhci_hcd [ 0.637707] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.637814] hub 6-0:1.0: USB hub found [ 0.637821] hub 6-0:1.0: 2 ports detected [ 0.637979] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.637985] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.637991] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.638015] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 0.638057] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.638060] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.638062] usb usb7: Product: UHCI Host Controller [ 0.638064] usb usb7: Manufacturer: Linux 3.19.0-25-generic uhci_hcd [ 0.638066] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.638174] hub 7-0:1.0: USB hub found [ 0.638182] hub 7-0:1.0: 2 ports detected [ 0.638341] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.638348] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.638354] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.638370] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 0.638412] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.638415] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.638417] usb usb8: Product: UHCI Host Controller [ 0.638419] usb usb8: Manufacturer: Linux 3.19.0-25-generic uhci_hcd [ 0.638421] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.638531] hub 8-0:1.0: USB hub found [ 0.638537] hub 8-0:1.0: 2 ports detected [ 0.638680] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.638681] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.639180] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.639302] mousedev: PS/2 mouse device common for all mice [ 0.639452] rtc_cmos 00:01: RTC can wake from S4 [ 0.639569] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.639591] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.639612] i2c /dev entries driver [ 0.639694] device-mapper: uevent: version 1.0.3 [ 0.639780] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 0.639799] ledtrig-cpu: registered to indicate activity on CPUs [ 0.639978] PCCT header not found. [ 0.639980] ACPI PCC probe failed. [ 0.640138] TCP: cubic registered [ 0.640322] NET: Registered protocol family 10 [ 0.640629] NET: Registered protocol family 17 [ 0.640649] Key type dns_resolver registered [ 0.641051] Loading compiled-in X.509 certificates [ 0.642221] Loaded X.509 cert 'Magrathea: Glacier signing key: 897aad757d0e4d72cd84240b25ac782885bfae3f' [ 0.642239] registered taskstats version 1 [ 0.645204] Key type trusted registered [ 0.650204] Key type encrypted registered [ 0.650211] AppArmor: AppArmor sha1 policy hashing enabled [ 0.650215] ima: No TPM chip found, activating TPM-bypass! [ 0.650240] evm: HMAC attrs: 0x1 [ 0.650640] Magic number: 11:931:754 [ 0.650677] tty ttyS5: hash matches [ 0.650767] rtc_cmos 00:01: setting system clock to 2015-08-12 22:43:52 UTC (1439419432) [ 0.651309] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.651311] EDD information not available. [ 0.651371] PM: Hibernation image not present or could not be loaded. [ 0.932041] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 0.934714] ata4: SATA link down (SStatus 0 SControl 300) [ 1.070461] usb 1-3: New USB device found, idVendor=0bda, idProduct=8187 [ 1.070466] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.070469] usb 1-3: Product: RTL8187_Wireless [ 1.070473] usb 1-3: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1.070476] usb 1-3: SerialNumber: 0015AF28AACE [ 1.080134] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.088322] ata3.00: ATA-7: Hitachi HDT725025VLA380, V5DOA73A, max UDMA/133 [ 1.088326] ata3.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.104314] ata3.00: configured for UDMA/133 [ 1.254650] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.254662] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.265305] ata1.00: SATA link down (SStatus 0 SControl 300) [ 1.265317] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.265433] scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72502 A73A PQ: 0 ANSI: 5 [ 1.265607] sd 2:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB) [ 1.265657] sd 2:0:0:0: [sda] Write Protect is off [ 1.265660] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.265662] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.265682] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.295112] sda: sda1 sda2 < sda5 > [ 1.295519] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.295966] Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000) [ 1.295968] Write protecting the kernel read-only data: 12288k [ 1.296240] Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000) [ 1.296395] Freeing unused kernel memory: 336K (ffff880001bac000 - ffff880001c00000) [ 1.310602] random: systemd-udevd urandom read with 15 bits of entropy available [ 1.335949] scsi host4: pata_jmicron [ 1.336087] scsi host5: pata_jmicron [ 1.336146] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17 [ 1.336149] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17 [ 1.337387] ahci 0000:03:00.0: version 3.0 [ 1.338639] sky2: driver version 1.30 [ 1.338704] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3 [ 1.339003] sky2 0000:02:00.0 eth0: addr 00:1d:60:00:17:93 [ 1.352232] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.352237] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.352708] scsi host6: ahci [ 1.352852] scsi host7: ahci [ 1.352932] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16 [ 1.352936] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16 [ 1.364152] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 1.400071] firewire_ohci 0000:05:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 1.500538] ata5.00: ATAPI: _NEC DVD_RW ND-3500AG, 2.18, max UDMA/33 [ 1.516557] ata5.00: configured for UDMA/33 [ 1.518248] scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.18 PQ: 0 ANSI: 5 [ 1.525093] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.525097] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.525289] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.525362] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.564028] tsc: Refined TSC clocksource calibration: 2405.454 MHz [ 1.672045] ata7: SATA link down (SStatus 0 SControl 300) [ 1.676054] ata8: SATA link down (SStatus 0 SControl 300) [ 1.900147] firewire_core 0000:05:03.0: created device fw0: GUID 0011d800014d56db, S400 [ 1.964027] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 1.964031] EXT4-fs (sda1): write access will be enabled during recovery [ 2.150063] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b [ 2.150069] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.150073] usb 5-1: Product: USB Receiver [ 2.150077] usb 5-1: Manufacturer: Logitech [ 2.396044] usb 5-2: new low-speed USB device number 3 using uhci_hcd [ 2.565049] Switched to clocksource tsc [ 2.737058] usb 5-2: New USB device found, idVendor=0e8f, idProduct=3013 [ 2.737064] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.737068] usb 5-2: Product: USB GamePad [ 2.737071] usb 5-2: Manufacturer: HuiJia [ 2.744909] hidraw: raw HID events driver (C) Jiri Kosina [ 2.867594] usbcore: registered new interface driver usbhid [ 2.867597] usbhid: USB HID core driver [ 2.874235] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input2 [ 2.878145] input: HuiJia USB GamePad as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:0E8F:3013.0004/input/input3 [ 2.878301] input: HuiJia USB GamePad as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:0E8F:3013.0004/input/input4 [ 2.878389] input: HuiJia USB GamePad as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:0E8F:3013.0004/input/input5 [ 2.878467] input: HuiJia USB GamePad as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:0E8F:3013.0004/input/input6 [ 2.878540] hid-generic 0003:0E8F:3013.0004: input,hidraw1: USB HID v1.10 Joystick [HuiJia USB GamePad] on usb-0000:00:1a.2-2/input0 [ 3.227965] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.352809] random: nonblocking pool is initialized [ 4.348047] floppy0: no floppy controllers found [ 4.489077] EXT4-fs (sda1): 8081 orphan inodes deleted [ 4.489081] EXT4-fs (sda1): recovery complete [ 5.167649] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.467439] systemd[1]: Inserted module 'autofs4' [ 6.577403] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 6.577568] systemd[1]: Detected architecture x86-64. [ 6.583384] systemd[1]: Set hostname to . [ 8.080550] systemd[1]: Reached target Remote File Systems (Pre). [ 8.080563] systemd[1]: Starting Remote File Systems (Pre). [ 8.080601] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.080611] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 8.080644] systemd[1]: Created slice Root Slice. [ 8.080653] systemd[1]: Starting Root Slice. [ 8.080751] systemd[1]: Created slice System Slice. [ 8.080767] systemd[1]: Starting System Slice. [ 8.080860] systemd[1]: Created slice system-getty.slice. [ 8.080870] systemd[1]: Starting system-getty.slice. [ 8.081512] systemd[1]: Starting Increase datagram queue length... [ 8.081622] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.081634] systemd[1]: Starting Journal Socket (/dev/log). [ 8.081720] systemd[1]: Listening on Journal Audit Socket. [ 8.081730] systemd[1]: Starting Journal Audit Socket. [ 8.081772] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 8.081781] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 8.081878] systemd[1]: Created slice User and Session Slice. [ 8.081888] systemd[1]: Starting User and Session Slice. [ 8.081906] systemd[1]: Reached target Slices. [ 8.081915] systemd[1]: Starting Slices. [ 8.081955] systemd[1]: Listening on udev Control Socket. [ 8.081964] systemd[1]: Starting udev Control Socket. [ 8.081996] systemd[1]: Listening on Delayed Shutdown Socket. [ 8.082005] systemd[1]: Starting Delayed Shutdown Socket. [ 8.082032] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.082044] systemd[1]: Starting fsck to fsckd communication Socket. [ 8.082071] systemd[1]: Listening on udev Kernel Socket. [ 8.082080] systemd[1]: Starting udev Kernel Socket. [ 8.082096] systemd[1]: Reached target Encrypted Volumes. [ 8.082104] systemd[1]: Starting Encrypted Volumes. [ 8.082303] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.082319] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 8.082371] systemd[1]: Listening on Journal Socket. [ 8.082386] systemd[1]: Starting Journal Socket. [ 8.083009] systemd[1]: Starting udev Coldplug all Devices... [ 8.083816] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 8.084597] systemd[1]: Started Read required files in advance. [ 8.084752] systemd[1]: Starting Read required files in advance... [ 8.085497] systemd[1]: Started Braille Device Support. [ 8.085570] systemd[1]: Starting Braille Device Support... [ 8.229499] systemd[1]: Starting Load Kernel Modules... [ 8.230245] systemd[1]: Starting Setup Virtual Console... [ 8.230937] systemd[1]: Starting Uncomplicated firewall... [ 8.231684] systemd[1]: Mounting Debug File System... [ 8.525727] systemd[1]: Started Set Up Additional Binary Formats. [ 8.526434] systemd[1]: Mounting Huge Pages File System... [ 8.527138] systemd[1]: Starting Nameserver information manager... [ 8.527784] systemd[1]: Mounting POSIX Message Queue File System... [ 8.591123] systemd[1]: Started Setup Virtual Console. [ 8.650638] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 8.651473] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.817143] systemd[1]: Started Increase datagram queue length. [ 8.818023] systemd[1]: Mounted Debug File System. [ 8.818192] systemd[1]: Mounted Huge Pages File System. [ 8.818329] systemd[1]: Mounted POSIX Message Queue File System. [ 8.819375] systemd[1]: Listening on Syslog Socket. [ 8.819389] systemd[1]: Starting Syslog Socket. [ 8.820071] systemd[1]: Starting Journal Service... [ 8.902533] systemd[1]: Started Uncomplicated firewall. [ 8.966501] systemd[1]: Started Nameserver information manager. [ 8.985220] systemd[1]: Started udev Coldplug all Devices. [ 8.986042] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 9.618805] lp: driver loaded but no devices found [ 9.695532] ppdev: user-space parallel port driver [ 9.764050] systemd[1]: Started Journal Service. [ 12.087175] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.632421] AMD IOMMUv2 driver by Joerg Roedel [ 12.632424] AMD IOMMUv2 functionality not available on this system [ 12.706656] coretemp coretemp.0: Using relative temperature scale! [ 12.706671] coretemp coretemp.0: Using relative temperature scale! [ 12.706683] coretemp coretemp.0: Using relative temperature scale! [ 12.706700] coretemp coretemp.0: Using relative temperature scale! [ 12.769690] gpio_ich: GPIO from 451 to 511 on gpio_ich [ 13.290214] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 13.339657] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7 [ 13.688161] input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0003/0003:046D:401B.0005/input/input8 [ 13.688359] logitech-hidpp-device 0003:046D:401B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:1a.2-1:1 [ 13.758057] sound hdaudioC0D0: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line [ 13.758061] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.758064] sound hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 13.758066] sound hdaudioC0D0: mono: mono_out=0x0 [ 13.758068] sound hdaudioC0D0: dig-out=0x1b/0x0 [ 13.758070] sound hdaudioC0D0: inputs: [ 13.758073] sound hdaudioC0D0: Front Mic=0x14 [ 13.758075] sound hdaudioC0D0: Rear Mic=0x17 [ 13.758077] sound hdaudioC0D0: Line=0x15 [ 13.758080] sound hdaudioC0D0: CD=0x18 [ 13.769868] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 13.769951] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 13.770665] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 13.771956] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 13.772056] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 13.772131] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 13.772212] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 13.772303] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 14.190309] input: Logitech K330 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0003/0003:046D:4016.0006/input/input17 [ 14.190422] logitech-hidpp-device 0003:046D:4016.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:1a.2-1:2 [ 14.205262] cfg80211: Calling CRDA to update world regulatory domain [ 15.060052] floppy0: no floppy controllers found [ 15.226910] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 15.227137] ieee80211 phy0: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 15.238344] rtl8187: Customer ID is 0x00 [ 15.239323] rtl8187: wireless switch is on [ 15.239367] usbcore: registered new interface driver rtl8187 [ 16.142946] cfg80211: World regulatory domain updated: [ 16.142950] cfg80211: DFS Master region: unset [ 16.142952] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 16.142955] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 16.142957] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 16.142959] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 16.142962] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 16.142964] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 16.602153] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 16.602157] Disabling lock debugging due to kernel taint [ 16.613781] fglrx: module verification failed: signature and/or required key missing - tainting kernel [ 16.632050] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [ 16.632366] <6>[fglrx] vendor: 1002 device: 6719 revision: 0 count: 1 [ 16.632907] <6>[fglrx] ioport: bar 4, base 0xc000, size: 0x100 [ 16.633269] <6>[fglrx] Kernel PAT support is enabled [ 16.633287] <6>[fglrx] module loaded - fglrx 15.20.2 [Feb 27 2015] with 1 minors [ 16.716634] Adding 4192252k swap on /dev/sda5. Priority:-1 extents:1 across:4192252k FS [ 17.506496] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 17.818600] systemd-journald[243]: Received request to flush runtime journal from PID 1 [ 20.443591] audit: type=1400 audit(1439419452.286:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=538 comm="apparmor_parser" [ 20.443600] audit: type=1400 audit(1439419452.286:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=538 comm="apparmor_parser" [ 20.502323] audit: type=1400 audit(1439419452.346:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=538 comm="apparmor_parser" [ 20.502333] audit: type=1400 audit(1439419452.346:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=538 comm="apparmor_parser" [ 20.502340] audit: type=1400 audit(1439419452.346:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=538 comm="apparmor_parser" [ 20.502346] audit: type=1400 audit(1439419452.346:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=538 comm="apparmor_parser" [ 20.739928] audit: type=1400 audit(1439419452.582:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=538 comm="apparmor_parser" [ 20.739939] audit: type=1400 audit(1439419452.582:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=538 comm="apparmor_parser" [ 20.739946] audit: type=1400 audit(1439419452.582:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=538 comm="apparmor_parser" [ 20.739952] audit: type=1400 audit(1439419452.582:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=538 comm="apparmor_parser" [ 31.506509] sky2 0000:02:00.0 eth0: enabling interface [ 34.636564] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 37.427402] <6>[fglrx] Firegl kernel thread PID: 1074 [ 37.427523] <6>[fglrx] Firegl kernel thread PID: 1075 [ 37.427645] <6>[fglrx] Firegl kernel thread PID: 1076 [ 37.427784] <6>[fglrx] IRQ 31 Enabled [ 37.516161] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 37.516164] <6>[fglrx] Reserved FB block: Unshared offset:f7e0000, size:4000 [ 37.516166] <6>[fglrx] Reserved FB block: Unshared offset:f7e4000, size:51c000 [ 37.516168] <6>[fglrx] Reserved FB block: Unshared offset:7fff3000, size:d000 [ 40.615346] vboxdrv: Found 4 processor cores. [ 40.615699] vboxdrv: fAsync=0 offMin=0x65d offMax=0x34c5 [ 40.615820] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 40.615822] vboxdrv: Successfully loaded version 4.3.26_Ubuntu (interface 0x001a000a). [ 40.896118] vboxpci: IOMMU not found (not registered) [ 868.786842] sky2 0000:02:00.0 eth0: disabling interface [ 868.788731] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 868.887031] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 869.246538] PM: Syncing filesystems ... done. [ 869.697572] PM: Preparing system for mem sleep [ 869.938102] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 869.940210] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 869.941368] PM: Entering mem sleep [ 869.941410] Suspending console(s) (use no_console_suspend to debug) [ 869.942206] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 869.942367] sd 2:0:0:0: [sda] Stopping disk [ 869.945292] i8042 kbd 00:06: System wakeup enabled by ACPI [ 869.945754] serial 00:04: disabled [ 869.945761] serial 00:04: System wakeup disabled by ACPI [ 870.000066] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [ 870.000068] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [ 870.000147] <6>[fglrx] IRQ 31 Disabled [ 870.000295] <6>[fglrx] Preparing suspend fglrx in kernel. [ 870.084027] usb 1-3: reset high-speed USB device number 2 using ehci-pci [ 870.416404] <6>[fglrx] Suspending fglrx in kernel completed. [ 870.416405] <6>[fglrx] Power down the ASIC . [ 870.416486] PM: suspend of devices complete after 474.685 msecs [ 870.417041] PM: late suspend of devices complete after 0.551 msecs [ 870.417413] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 870.417505] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 870.417562] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 870.417588] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 870.417698] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [ 870.417731] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [ 870.417763] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [ 870.417783] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [ 870.572109] PM: noirq suspend of devices complete after 155.063 msecs [ 870.572780] ACPI: Preparing to enter system sleep state S3 [ 870.573050] PM: Saving platform NVS memory [ 870.573452] Disabling non-boot CPUs ... [ 870.574790] kvm: disabling virtualization on CPU1 [ 870.574807] smpboot: CPU 1 is now offline [ 870.576639] kvm: disabling virtualization on CPU2 [ 870.576680] smpboot: CPU 2 is now offline [ 870.577404] Broke affinity for irq 16 [ 870.577411] Broke affinity for irq 17 [ 870.577418] Broke affinity for irq 18 [ 870.577436] Broke affinity for irq 22 [ 870.578460] kvm: disabling virtualization on CPU3 [ 870.578475] smpboot: CPU 3 is now offline [ 870.578736] ACPI: Low-level resume complete [ 870.578736] PM: Restoring platform NVS memory [ 870.578736] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [ 870.578736] Enabling non-boot CPUs ... [ 870.578736] x86: Booting SMP configuration: [ 870.578736] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 870.574800] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [ 870.574800] kvm: enabling virtualization on CPU1 [ 870.597934] CPU1 is up [ 870.597957] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 870.576644] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [ 870.576644] kvm: enabling virtualization on CPU2 [ 870.616874] CPU2 is up [ 870.616914] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 870.578470] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [ 870.578470] kvm: enabling virtualization on CPU3 [ 870.635862] CPU3 is up [ 870.639377] ACPI: Waking up from system sleep state S3 [ 870.640016] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [ 870.640062] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [ 870.640099] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [ 870.640292] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 870.640313] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 870.640359] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 870.660088] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [ 870.660165] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 870.796176] PM: noirq resume of devices complete after 156.307 msecs [ 870.796488] PM: early resume of devices complete after 0.282 msecs [ 870.796564] usb usb3: root hub lost power or was reset [ 870.796568] usb usb4: root hub lost power or was reset [ 870.796575] usb usb5: root hub lost power or was reset [ 870.796648] usb usb6: root hub lost power or was reset [ 870.796664] usb usb7: root hub lost power or was reset [ 870.796701] usb usb8: root hub lost power or was reset [ 870.800575] sd 2:0:0:0: [sda] Starting disk [ 870.812060] rtc_cmos 00:01: System wakeup disabled by ACPI [ 870.812621] serial 00:04: activated [ 870.812631] i8042 kbd 00:06: System wakeup disabled by ACPI [ 870.822985] <6>[fglrx] Power up the ASIC [ 870.844934] <6>[fglrx] Preparing resume fglrx in kernel. [ 870.865508] <6>[fglrx] Resuming fglrx in kernel completed. [ 870.865578] <6>[fglrx] IRQ 31 Enabled [ 870.983486] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 870.983488] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 870.996517] ata5.00: configured for UDMA/33 [ 871.126635] ata4: SATA link down (SStatus 0 SControl 300) [ 871.128051] ata8: SATA link down (SStatus 0 SControl 300) [ 871.128054] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 871.132054] ata7: SATA link down (SStatus 0 SControl 300) [ 871.364066] firewire_core 0000:05:03.0: rediscovered device fw0 [ 871.446650] ata2.00: SATA link down (SStatus 0 SControl 300) [ 871.446661] ata2.01: SATA link down (SStatus 0 SControl 300) [ 871.457308] ata1.00: SATA link down (SStatus 0 SControl 300) [ 871.457319] ata1.01: SATA link down (SStatus 0 SControl 300) [ 871.520044] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [ 871.971632] PM: resume of devices complete after 1175.140 msecs [ 872.120600] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 872.120907] ieee80211 phy1: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 872.131729] rtl8187: Customer ID is 0x00 [ 872.132342] rtl8187: wireless switch is on [ 872.132842] PM: Finishing wakeup. [ 872.132844] Restarting tasks ... done. [ 872.163217] sky2 0000:02:00.0 eth0: enabling interface [ 875.166041] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 876.328027] ata3: link is slow to respond, please be patient (ready=0) [ 877.848063] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 877.860135] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 877.860140] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 877.860326] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 877.860331] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 877.884296] ata3.00: configured for UDMA/133 [ 1587.304124] sky2 0000:02:00.0 eth0: disabling interface [ 1587.306168] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1587.397830] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1587.406812] PM: Syncing filesystems ... done. [ 1587.570425] PM: Preparing system for mem sleep [ 1587.839114] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 1587.841193] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1587.842352] PM: Entering mem sleep [ 1587.842392] Suspending console(s) (use no_console_suspend to debug) [ 1587.843162] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 1587.845829] sd 2:0:0:0: [sda] Stopping disk [ 1587.846151] i8042 kbd 00:06: System wakeup enabled by ACPI [ 1587.846559] serial 00:04: disabled [ 1587.846565] serial 00:04: System wakeup disabled by ACPI [ 1587.904062] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [ 1587.904065] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [ 1587.904143] <6>[fglrx] IRQ 31 Disabled [ 1587.904293] <6>[fglrx] Preparing suspend fglrx in kernel. [ 1587.976034] usb 1-3: reset high-speed USB device number 2 using ehci-pci [ 1588.316504] <6>[fglrx] Suspending fglrx in kernel completed. [ 1588.316505] <6>[fglrx] Power down the ASIC . [ 1588.316569] PM: suspend of devices complete after 473.788 msecs [ 1588.317022] PM: late suspend of devices complete after 0.449 msecs [ 1588.317506] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 1588.317536] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 1588.317589] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 1588.317639] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 1588.317792] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [ 1588.317793] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [ 1588.317858] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [ 1588.317882] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [ 1588.472093] PM: noirq suspend of devices complete after 155.068 msecs [ 1588.472596] ACPI: Preparing to enter system sleep state S3 [ 1588.472861] PM: Saving platform NVS memory [ 1588.473262] Disabling non-boot CPUs ... [ 1588.474586] kvm: disabling virtualization on CPU1 [ 1588.474601] smpboot: CPU 1 is now offline [ 1588.476462] kvm: disabling virtualization on CPU2 [ 1588.476494] smpboot: CPU 2 is now offline [ 1588.477159] Broke affinity for irq 19 [ 1588.478202] kvm: disabling virtualization on CPU3 [ 1588.478222] smpboot: CPU 3 is now offline [ 1588.478414] ACPI: Low-level resume complete [ 1588.478414] PM: Restoring platform NVS memory [ 1588.478414] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [ 1588.478414] Enabling non-boot CPUs ... [ 1588.478414] x86: Booting SMP configuration: [ 1588.478414] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1588.474597] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [ 1588.474597] kvm: enabling virtualization on CPU1 [ 1588.497616] CPU1 is up [ 1588.497639] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 1588.476468] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [ 1588.476468] kvm: enabling virtualization on CPU2 [ 1588.516558] CPU2 is up [ 1588.516597] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1588.478217] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [ 1588.478217] kvm: enabling virtualization on CPU3 [ 1588.535555] CPU3 is up [ 1588.539071] ACPI: Waking up from system sleep state S3 [ 1588.539712] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [ 1588.539728] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [ 1588.539760] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [ 1588.539925] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 1588.539981] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 1588.540001] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 1588.552086] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [ 1588.552140] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 1588.696188] PM: noirq resume of devices complete after 156.631 msecs [ 1588.696685] PM: early resume of devices complete after 0.467 msecs [ 1588.696761] usb usb3: root hub lost power or was reset [ 1588.696763] usb usb4: root hub lost power or was reset [ 1588.696767] usb usb5: root hub lost power or was reset [ 1588.696839] usb usb6: root hub lost power or was reset [ 1588.696864] usb usb7: root hub lost power or was reset [ 1588.696891] usb usb8: root hub lost power or was reset [ 1588.701621] sd 2:0:0:0: [sda] Starting disk [ 1588.712079] rtc_cmos 00:01: System wakeup disabled by ACPI [ 1588.712828] serial 00:04: activated [ 1588.712845] i8042 kbd 00:06: System wakeup disabled by ACPI [ 1588.723174] <6>[fglrx] Power up the ASIC [ 1588.745127] <6>[fglrx] Preparing resume fglrx in kernel. [ 1588.765765] <6>[fglrx] Resuming fglrx in kernel completed. [ 1588.765835] <6>[fglrx] IRQ 31 Enabled [ 1588.884533] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1588.884535] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 1588.900528] ata5.00: configured for UDMA/33 [ 1589.032027] ata8: SATA link down (SStatus 0 SControl 300) [ 1589.034641] ata4: SATA link down (SStatus 0 SControl 300) [ 1589.036032] ata7: SATA link down (SStatus 0 SControl 300) [ 1589.176030] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [ 1589.264037] firewire_core 0000:05:03.0: rediscovered device fw0 [ 1589.350654] ata1.00: SATA link down (SStatus 0 SControl 300) [ 1589.350664] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1589.361300] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1589.361310] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1589.644474] PM: resume of devices complete after 947.786 msecs [ 1589.793452] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 1589.793764] ieee80211 phy2: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1589.804573] rtl8187: Customer ID is 0x00 [ 1589.805188] rtl8187: wireless switch is on [ 1589.805686] PM: Finishing wakeup. [ 1589.805688] Restarting tasks ... [ 1589.805745] usb 5-1: USB disconnect, device number 2 [ 1589.820085] done. [ 1589.852742] sky2 0000:02:00.0 eth0: enabling interface [ 1592.929164] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 1593.336621] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen [ 1593.336627] ata8: irq_stat 0x00000040, connection status changed [ 1593.336631] ata8: SError: { DevExch } [ 1593.336638] ata8: hard resetting link [ 1594.064045] ata8: SATA link down (SStatus 0 SControl 300) [ 1594.064060] ata8: EH complete [ 1594.144204] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen [ 1594.144207] ata8: irq_stat 0x00000040, connection status changed [ 1594.144210] ata8: SError: { DevExch } [ 1594.144214] ata8: hard resetting link [ 1594.196069] ata3: link is slow to respond, please be patient (ready=0) [ 1595.772055] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1595.780139] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1595.780144] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1595.780332] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1595.780337] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1595.808290] ata3.00: configured for UDMA/133 [ 1596.444032] ata8: COMRESET failed (errno=-32) [ 1596.444042] ata8: reset failed (errno=-32), retrying in 8 secs [ 1604.144025] ata8: limiting SATA link speed to 1.5 Gbps [ 1604.144031] ata8: hard resetting link [ 1606.436020] ata8: COMRESET failed (errno=-32) [ 1606.436030] ata8: reset failed (errno=-32), retrying in 8 secs [ 1614.144027] ata8: hard resetting link [ 1614.868041] ata8: SATA link down (SStatus 0 SControl 310) [ 1614.868056] ata8: EH complete [ 1615.184158] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 1615.184163] ata8: irq_stat 0x00000040, connection status changed [ 1615.184168] ata8: SError: { CommWake DevExch } [ 1615.184175] ata8: limiting SATA link speed to 1.5 Gbps [ 1615.184178] ata8: hard resetting link [ 1615.908050] ata8: SATA link down (SStatus 0 SControl 310) [ 1615.908062] ata8: EH complete [ 4338.156024] usb 5-1: new full-speed USB device number 4 using uhci_hcd [ 4338.325452] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b [ 4338.325457] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4338.325462] usb 5-1: Product: USB Receiver [ 4338.325465] usb 5-1: Manufacturer: Logitech [ 4338.345635] logitech-djreceiver 0003:046D:C52B.0009: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input2 [ 4338.468574] input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0009/0003:046D:401B.000A/input/input20 [ 4338.468823] logitech-hidpp-device 0003:046D:401B.000A: input,hidraw2: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:1a.2-1:1 [ 4338.477194] input: Logitech K330 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0009/0003:046D:4016.000B/input/input21 [ 4338.477394] logitech-hidpp-device 0003:046D:4016.000B: input,hidraw3: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:1a.2-1:2 [ 4353.416297] sky2 0000:02:00.0 eth0: disabling interface [ 4353.418181] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4353.505858] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4357.414199] PM: Syncing filesystems ... done. [ 4357.655036] PM: Preparing system for mem sleep [ 4357.896741] Freezing user space processes ... (elapsed 0.039 seconds) done. [ 4357.936258] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4357.937412] PM: Entering mem sleep [ 4357.937452] Suspending console(s) (use no_console_suspend to debug) [ 4357.938210] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 4357.938358] sd 2:0:0:0: [sda] Stopping disk [ 4357.941284] i8042 kbd 00:06: System wakeup enabled by ACPI [ 4357.941732] serial 00:04: disabled [ 4357.941739] serial 00:04: System wakeup disabled by ACPI [ 4357.996062] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [ 4357.996065] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [ 4357.996145] <6>[fglrx] IRQ 31 Disabled [ 4357.996268] <6>[fglrx] Preparing suspend fglrx in kernel. [ 4358.072049] usb 1-3: reset high-speed USB device number 2 using ehci-pci [ 4358.408587] <6>[fglrx] Suspending fglrx in kernel completed. [ 4358.408588] <6>[fglrx] Power down the ASIC . [ 4358.408667] PM: suspend of devices complete after 470.827 msecs [ 4358.409224] PM: late suspend of devices complete after 0.554 msecs [ 4358.409607] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 4358.409640] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 4358.409667] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 4358.409689] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 4358.409741] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [ 4358.409784] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [ 4358.409800] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [ 4358.409829] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [ 4358.564110] PM: noirq suspend of devices complete after 154.883 msecs [ 4358.564617] ACPI: Preparing to enter system sleep state S3 [ 4358.564827] PM: Saving platform NVS memory [ 4358.565155] Disabling non-boot CPUs ... [ 4358.566428] kvm: disabling virtualization on CPU1 [ 4358.566440] smpboot: CPU 1 is now offline [ 4358.568187] kvm: disabling virtualization on CPU2 [ 4358.568220] smpboot: CPU 2 is now offline [ 4358.569023] Broke affinity for irq 17 [ 4358.569030] Broke affinity for irq 18 [ 4358.569044] Broke affinity for irq 22 [ 4358.570077] kvm: disabling virtualization on CPU3 [ 4358.570104] smpboot: CPU 3 is now offline [ 4358.570335] ACPI: Low-level resume complete [ 4358.570335] PM: Restoring platform NVS memory [ 4358.570335] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [ 4358.570335] Enabling non-boot CPUs ... [ 4358.570335] x86: Booting SMP configuration: [ 4358.570335] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 4358.566437] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [ 4358.566437] kvm: enabling virtualization on CPU1 [ 4358.589476] CPU1 is up [ 4358.589500] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 4358.568192] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [ 4358.568192] kvm: enabling virtualization on CPU2 [ 4358.608425] CPU2 is up [ 4358.608464] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 4358.570092] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [ 4358.570092] kvm: enabling virtualization on CPU3 [ 4358.627420] CPU3 is up [ 4358.630938] ACPI: Waking up from system sleep state S3 [ 4358.631554] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [ 4358.631570] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [ 4358.631603] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [ 4358.631787] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 4358.631820] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 4358.631875] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 4358.644153] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 4358.644172] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [ 4358.784173] PM: noirq resume of devices complete after 152.748 msecs [ 4358.784440] PM: early resume of devices complete after 0.231 msecs [ 4358.784505] usb usb3: root hub lost power or was reset [ 4358.784507] usb usb4: root hub lost power or was reset [ 4358.784553] usb usb5: root hub lost power or was reset [ 4358.784593] usb usb6: root hub lost power or was reset [ 4358.784605] usb usb7: root hub lost power or was reset [ 4358.784644] usb usb8: root hub lost power or was reset [ 4358.788433] sd 2:0:0:0: [sda] Starting disk [ 4358.800080] rtc_cmos 00:01: System wakeup disabled by ACPI [ 4358.800846] serial 00:04: activated [ 4358.800857] i8042 kbd 00:06: System wakeup disabled by ACPI [ 4358.810943] <6>[fglrx] Power up the ASIC [ 4358.832887] <6>[fglrx] Preparing resume fglrx in kernel. [ 4358.853498] <6>[fglrx] Resuming fglrx in kernel completed. [ 4358.853568] <6>[fglrx] IRQ 31 Enabled [ 4358.967793] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 4358.967795] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 4358.980534] ata5.00: configured for UDMA/33 [ 4359.114624] ata4: SATA link down (SStatus 0 SControl 300) [ 4359.116043] ata8: SATA link down (SStatus 0 SControl 310) [ 4359.116077] ata7: SATA link down (SStatus 0 SControl 300) [ 4359.264030] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [ 4359.352049] firewire_core 0000:05:03.0: rediscovered device fw0 [ 4359.438645] ata2.00: SATA link down (SStatus 0 SControl 300) [ 4359.438660] ata2.01: SATA link down (SStatus 0 SControl 300) [ 4359.449288] ata1.00: SATA link down (SStatus 0 SControl 300) [ 4359.449298] ata1.01: SATA link down (SStatus 0 SControl 300) [ 4359.748052] usb 5-1: reset full-speed USB device number 4 using uhci_hcd [ 4359.961610] PM: resume of devices complete after 1177.166 msecs [ 4360.110561] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht' [ 4360.110873] ieee80211 phy3: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 4360.121693] rtl8187: Customer ID is 0x00 [ 4360.122306] rtl8187: wireless switch is on [ 4360.122737] PM: Finishing wakeup. [ 4360.122739] Restarting tasks ... done. [ 4360.149900] sky2 0000:02:00.0 eth0: enabling interface [ 4363.189426] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 4364.175376] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen [ 4364.175382] ata8: irq_stat 0x00000040, connection status changed [ 4364.175387] ata8: SError: { DevExch } [ 4364.175393] ata8: hard resetting link [ 4364.320017] ata3: link is slow to respond, please be patient (ready=0) [ 4364.896033] ata8: SATA link down (SStatus 0 SControl 300) [ 4364.896048] ata8: EH complete [ 4364.943552] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 4364.943556] ata8: irq_stat 0x00000040, connection status changed [ 4364.943560] ata8: SError: { CommWake DevExch } [ 4364.943566] ata8: hard resetting link [ 4365.664035] ata8: SATA link down (SStatus 0 SControl 300) [ 4365.664050] ata8: EH complete [ 4365.664743] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen [ 4365.664746] ata8: irq_stat 0x00000040, connection status changed [ 4365.664750] ata8: SError: { DevExch } [ 4365.664756] ata8: limiting SATA link speed to 1.5 Gbps [ 4365.664759] ata8: hard resetting link [ 4365.888047] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4365.912124] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 4365.912129] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 4365.912302] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 4365.912307] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 4365.936284] ata3.00: configured for UDMA/133 [ 4366.420037] ata8: SATA link down (SStatus 0 SControl 310) [ 4366.420054] ata8: EH complete [ 4366.426523] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [ 4366.426529] ata8: irq_stat 0x00000040, connection status changed [ 4366.426534] ata8: SError: { PHYInt CommWake DevExch } [ 4366.426542] ata8: limiting SATA link speed to 1.5 Gbps [ 4366.426545] ata8: hard resetting link [ 4368.652016] ata8: COMRESET failed (errno=-32) [ 4368.652026] ata8: reset failed (errno=-32), retrying in 8 secs [ 4376.424031] ata8: hard resetting link [ 4378.716013] ata8: COMRESET failed (errno=-32) [ 4378.716023] ata8: reset failed (errno=-32), retrying in 8 secs [ 4386.424019] ata8: hard resetting link [ 4388.684035] ata8: SATA link down (SStatus 0 SControl 310) [ 4388.684052] ata8: EH complete [ 4388.701590] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [ 4388.701595] ata8: irq_stat 0x00000040, connection status changed [ 4388.701599] ata8: SError: { PHYInt CommWake DevExch } [ 4388.701606] ata8: limiting SATA link speed to 1.5 Gbps [ 4388.701610] ata8: hard resetting link [ 4389.424036] ata8: SATA link down (SStatus 0 SControl 310) [ 4389.424052] ata8: EH complete [ 4389.524573] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [ 4389.524577] ata8: irq_stat 0x00000040, connection status changed [ 4389.524582] ata8: SError: { PHYInt CommWake DevExch } [ 4389.524588] ata8: limiting SATA link speed to 1.5 Gbps [ 4389.524591] ata8: hard resetting link [ 4390.248028] ata8: SATA link down (SStatus 0 SControl 310) [ 4390.248041] ata8: EH complete [ 4390.248869] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [ 4390.248874] ata8: irq_stat 0x00000040, connection status changed [ 4390.248878] ata8: SError: { PHYInt CommWake DevExch } [ 4390.248884] ata8: limiting SATA link speed to 1.5 Gbps [ 4390.248887] ata8: hard resetting link [ 4390.972030] ata8: SATA link down (SStatus 0 SControl 310) [ 4390.972043] ata8: EH complete [ 4391.023662] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [ 4391.023666] ata8: irq_stat 0x00000040, connection status changed [ 4391.023670] ata8: SError: { PHYInt CommWake DevExch } [ 4391.023676] ata8: limiting SATA link speed to 1.5 Gbps [ 4391.023679] ata8: hard resetting link [ 4391.872028] ata8: SATA link down (SStatus 0 SControl 310) [ 4391.872041] ata8: EH complete [ 4392.075537] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [ 4392.075541] ata8: irq_stat 0x00000040, connection status changed [ 4392.075545] ata8: SError: { PHYInt CommWake DevExch } [ 4392.075551] ata8: limiting SATA link speed to 1.5 Gbps [ 4392.075554] ata8: hard resetting link [ 4392.860030] ata8: SATA link down (SStatus 0 SControl 310) [ 4392.860043] ata8: EH complete [ 4394.742827] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [ 4394.742833] ata8: irq_stat 0x00000040, connection status changed [ 4394.742837] ata8: SError: { PHYInt CommWake DevExch } [ 4394.742844] ata8: limiting SATA link speed to 1.5 Gbps [ 4394.742848] ata8: hard resetting link [ 4395.464033] ata8: SATA link down (SStatus 0 SControl 310) [ 4395.464046] ata8: EH complete [ 4927.874580] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 6131.539454] irq 16: nobody cared (try booting with the "irqpoll" option) [ 6131.539465] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P OE 3.19.0-25-generic #26-Ubuntu [ 6131.539468] Hardware name: System manufacturer P5K Premium/P5K Premium, BIOS 0204 06/26/2007 [ 6131.539471] ffff8800c8055ca4 ffff88012fc03e28 ffffffff817c4518 0000000000040400 [ 6131.539476] ffff8800c8055c00 ffff88012fc03e58 ffffffff810d0e86 ffff88012fc03f30 [ 6131.539480] ffff8800c8055c00 0000000000000000 0000000000000010 ffff88012fc03e98 [ 6131.539484] Call Trace: [ 6131.539487] [] dump_stack+0x45/0x57 [ 6131.539502] [] __report_bad_irq+0x36/0xd0 [ 6131.539506] [] note_interrupt+0x267/0x2b0 [ 6131.539511] [] handle_irq_event_percpu+0x133/0x1a0 [ 6131.539515] [] handle_irq_event+0x41/0x70 [ 6131.539520] [] handle_fasteoi_irq+0x86/0x140 [ 6131.539524] [] handle_irq+0x22/0x40 [ 6131.539529] [] do_IRQ+0x4f/0xf0 [ 6131.539533] [] common_interrupt+0x6d/0x6d [ 6131.539534] [] ? mwait_idle+0x6d/0x90 [ 6131.539543] [] arch_cpu_idle+0xf/0x20 [ 6131.539548] [] cpu_startup_entry+0x36a/0x3b0 [ 6131.539553] [] rest_init+0x77/0x80 [ 6131.539559] [] start_kernel+0x482/0x48f [ 6131.539563] [] ? early_idt_handlers+0x120/0x120 [ 6131.539567] [] x86_64_start_reservations+0x2a/0x2c [ 6131.539571] [] x86_64_start_kernel+0x143/0x152 [ 6131.539573] handlers: [ 6131.539577] [] usb_hcd_irq [ 6131.539594] [] ahci_single_irq_intr [libahci] [ 6131.539597] Disabling IRQ #16 [13422.309667] sky2 0000:02:00.0 eth0: disabling interface [13422.311696] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [13422.419253] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [13422.428941] PM: Syncing filesystems ... done. [13422.644385] PM: Preparing system for mem sleep [13422.722936] Assertion failed in ../../../../../../../../drivers/2d/lnx/fgl/drm/kernel/hal_evergreen.c at line: 69 [13422.954607] Freezing user space processes ... (elapsed 0.001 seconds) done. [13422.956507] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [13422.957666] PM: Entering mem sleep [13422.957705] Suspending console(s) (use no_console_suspend to debug) [13422.958350] sd 2:0:0:0: [sda] Synchronizing SCSI cache [13422.958495] sd 2:0:0:0: [sda] Stopping disk [13422.961373] i8042 kbd 00:06: System wakeup enabled by ACPI [13422.961707] serial 00:04: disabled [13422.961712] serial 00:04: System wakeup disabled by ACPI [13423.020060] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [13423.020062] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [13423.020129] <6>[fglrx] IRQ 31 Disabled [13423.020280] <6>[fglrx] Preparing suspend fglrx in kernel. [13423.092031] usb 1-3: reset high-speed USB device number 2 using ehci-pci [13423.427204] <6>[fglrx] Suspending fglrx in kernel completed. [13423.427205] <6>[fglrx] Power down the ASIC . [13423.427274] PM: suspend of devices complete after 469.223 msecs [13423.427817] PM: late suspend of devices complete after 0.540 msecs [13423.428191] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [13423.428262] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [13423.428283] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [13423.428376] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [13423.428401] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [13423.428439] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [13423.428475] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [13423.428544] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [13423.584091] PM: noirq suspend of devices complete after 156.271 msecs [13423.584598] ACPI: Preparing to enter system sleep state S3 [13423.584802] PM: Saving platform NVS memory [13423.585122] Disabling non-boot CPUs ... [13423.586481] kvm: disabling virtualization on CPU1 [13423.586498] smpboot: CPU 1 is now offline [13423.588276] kvm: disabling virtualization on CPU2 [13423.588311] smpboot: CPU 2 is now offline [13423.588975] Broke affinity for irq 17 [13423.588987] Broke affinity for irq 19 [13423.590022] kvm: disabling virtualization on CPU3 [13423.590043] smpboot: CPU 3 is now offline [13423.590227] ACPI: Low-level resume complete [13423.590227] PM: Restoring platform NVS memory [13423.590227] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [13423.590227] Enabling non-boot CPUs ... [13423.590227] x86: Booting SMP configuration: [13423.590227] smpboot: Booting Node 0 Processor 1 APIC 0x1 [13423.586491] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [13423.586491] kvm: enabling virtualization on CPU1 [13423.609401] CPU1 is up [13423.609425] smpboot: Booting Node 0 Processor 2 APIC 0x2 [13423.588279] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [13423.588279] kvm: enabling virtualization on CPU2 [13423.628342] CPU2 is up [13423.628382] smpboot: Booting Node 0 Processor 3 APIC 0x3 [13423.590032] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [13423.590032] kvm: enabling virtualization on CPU3 [13423.647335] CPU3 is up [13423.650850] ACPI: Waking up from system sleep state S3 [13423.651468] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [13423.651509] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [13423.651547] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [13423.651711] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [13423.651725] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [13423.651755] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [13423.668154] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [13423.668251] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [13423.804177] PM: noirq resume of devices complete after 152.840 msecs [13423.804746] PM: early resume of devices complete after 0.540 msecs [13423.804810] usb usb4: root hub lost power or was reset [13423.804811] usb usb3: root hub lost power or was reset [13423.804853] usb usb5: root hub lost power or was reset [13423.804945] usb usb6: root hub lost power or was reset [13423.804982] usb usb7: root hub lost power or was reset [13423.804999] usb usb8: root hub lost power or was reset [13423.810973] sd 2:0:0:0: [sda] Starting disk [13423.820084] rtc_cmos 00:01: System wakeup disabled by ACPI [13423.820784] serial 00:04: activated [13423.820798] i8042 kbd 00:06: System wakeup disabled by ACPI [13423.831213] <6>[fglrx] Power up the ASIC [13423.853172] <6>[fglrx] Preparing resume fglrx in kernel. [13423.873790] <6>[fglrx] Resuming fglrx in kernel completed. [13423.873860] <6>[fglrx] IRQ 31 Enabled [13423.992540] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [13423.992542] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [13424.008537] ata5.00: configured for UDMA/33 [13424.138630] ata4: SATA link down (SStatus 0 SControl 300) [13424.140079] ata7: SATA link down (SStatus 0 SControl 300) [13424.140110] ata8: SATA link down (SStatus 0 SControl 310) [13424.284030] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [13424.372039] firewire_core 0000:05:03.0: rediscovered device fw0 [13424.462650] ata1.00: SATA link down (SStatus 0 SControl 300) [13424.462660] ata1.01: SATA link down (SStatus 0 SControl 300) [13424.473292] ata2.00: SATA link down (SStatus 0 SControl 300) [13424.473302] ata2.01: SATA link down (SStatus 0 SControl 300) [13424.700042] usb 5-1: reset full-speed USB device number 4 using uhci_hcd [13424.913721] PM: resume of devices complete after 1108.971 msecs [13425.062743] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht' [13425.063056] ieee80211 phy4: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [13425.073869] rtl8187: Customer ID is 0x00 [13425.074483] rtl8187: wireless switch is on [13425.074996] PM: Finishing wakeup. [13425.074999] Restarting tasks ... done. [13425.109141] sky2 0000:02:00.0 eth0: enabling interface [13428.110733] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [13429.344027] ata3: link is slow to respond, please be patient (ready=0) [13430.860113] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [13430.868136] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [13430.868142] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [13430.868325] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [13430.868329] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [13430.896299] ata3.00: configured for UDMA/133 [13839.946358] perf interrupt took too long (5057 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [21186.089093] sky2 0000:02:00.0 eth0: disabling interface [21186.091091] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [21186.203709] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [21186.244979] PM: Syncing filesystems ... done. [21186.416449] PM: Preparing system for mem sleep [21186.963515] Freezing user space processes ... (elapsed 0.002 seconds) done. [21186.965544] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [21186.966703] PM: Entering mem sleep [21186.966748] Suspending console(s) (use no_console_suspend to debug) [21186.967405] sd 2:0:0:0: [sda] Synchronizing SCSI cache [21186.967567] sd 2:0:0:0: [sda] Stopping disk [21186.970406] i8042 kbd 00:06: System wakeup enabled by ACPI [21186.970705] serial 00:04: disabled [21186.970709] serial 00:04: System wakeup disabled by ACPI [21187.028095] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [21187.028098] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [21187.028180] <6>[fglrx] IRQ 31 Disabled [21187.028379] <6>[fglrx] Preparing suspend fglrx in kernel. [21187.088044] usb 1-3: reset high-speed USB device number 2 using ehci-pci [21187.441597] <6>[fglrx] Suspending fglrx in kernel completed. [21187.441598] <6>[fglrx] Power down the ASIC . [21187.441670] PM: suspend of devices complete after 474.566 msecs [21187.442025] PM: late suspend of devices complete after 0.352 msecs [21187.442457] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [21187.442540] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [21187.442566] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [21187.442588] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [21187.442724] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [21187.442726] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [21187.442785] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [21187.442809] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [21187.596120] PM: noirq suspend of devices complete after 154.091 msecs [21187.596630] ACPI: Preparing to enter system sleep state S3 [21187.596830] PM: Saving platform NVS memory [21187.597159] Disabling non-boot CPUs ... [21187.598445] kvm: disabling virtualization on CPU1 [21187.598461] smpboot: CPU 1 is now offline [21187.600196] kvm: disabling virtualization on CPU2 [21187.600224] smpboot: CPU 2 is now offline [21187.601884] kvm: disabling virtualization on CPU3 [21187.601912] smpboot: CPU 3 is now offline [21187.602109] ACPI: Low-level resume complete [21187.602109] PM: Restoring platform NVS memory [21187.602109] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [21187.602109] Enabling non-boot CPUs ... [21187.602109] x86: Booting SMP configuration: [21187.602109] smpboot: Booting Node 0 Processor 1 APIC 0x1 [21187.598457] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [21187.598457] kvm: enabling virtualization on CPU1 [21187.621331] CPU1 is up [21187.621354] smpboot: Booting Node 0 Processor 2 APIC 0x2 [21187.600202] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [21187.600202] kvm: enabling virtualization on CPU2 [21187.640315] CPU2 is up [21187.640355] smpboot: Booting Node 0 Processor 3 APIC 0x3 [21187.601906] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [21187.601906] kvm: enabling virtualization on CPU3 [21187.659325] CPU3 is up [21187.662851] ACPI: Waking up from system sleep state S3 [21187.663495] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [21187.663512] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [21187.663543] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [21187.663710] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [21187.663767] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [21187.663790] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [21187.676157] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [21187.676328] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [21187.816180] PM: noirq resume of devices complete after 152.836 msecs [21187.816643] PM: early resume of devices complete after 0.434 msecs [21187.816706] usb usb3: root hub lost power or was reset [21187.816707] usb usb4: root hub lost power or was reset [21187.816752] usb usb5: root hub lost power or was reset [21187.816822] usb usb6: root hub lost power or was reset [21187.816824] usb usb7: root hub lost power or was reset [21187.816878] usb usb8: root hub lost power or was reset [21187.820339] sd 2:0:0:0: [sda] Starting disk [21187.832077] rtc_cmos 00:01: System wakeup disabled by ACPI [21187.832790] serial 00:04: activated [21187.832803] i8042 kbd 00:06: System wakeup disabled by ACPI [21187.843162] <6>[fglrx] Power up the ASIC [21187.865119] <6>[fglrx] Preparing resume fglrx in kernel. [21187.885759] <6>[fglrx] Resuming fglrx in kernel completed. [21187.885831] <6>[fglrx] IRQ 31 Enabled [21187.999714] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [21187.999716] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [21188.012584] ata5.00: configured for UDMA/33 [21188.146719] ata4: SATA link down (SStatus 0 SControl 300) [21188.152047] ata8: SATA link down (SStatus 0 SControl 310) [21188.156052] ata7: SATA link down (SStatus 0 SControl 300) [21188.296086] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [21188.372067] firewire_core 0000:05:03.0: rediscovered device fw0 [21188.474662] ata1.00: SATA link down (SStatus 0 SControl 300) [21188.474673] ata1.01: SATA link down (SStatus 0 SControl 300) [21188.485318] ata2.00: SATA link down (SStatus 0 SControl 300) [21188.485329] ata2.01: SATA link down (SStatus 0 SControl 300) [21188.780049] usb 5-1: reset full-speed USB device number 4 using uhci_hcd [21188.993474] PM: resume of devices complete after 1176.827 msecs [21189.142687] ieee80211 phy5: Selected rate control algorithm 'minstrel_ht' [21189.143003] ieee80211 phy5: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [21189.153817] rtl8187: Customer ID is 0x00 [21189.154431] rtl8187: wireless switch is on [21189.154869] PM: Finishing wakeup. [21189.154871] Restarting tasks ... done. [21189.183774] sky2 0000:02:00.0 eth0: enabling interface [21192.188369] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [21193.344033] ata3: link is slow to respond, please be patient (ready=0) [21193.640048] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen [21193.640054] ata8: irq_stat 0x00000040, connection status changed [21193.640058] ata8: SError: { DevExch } [21193.640066] ata8: hard resetting link [21194.912115] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [21194.920140] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [21194.920145] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [21194.920339] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [21194.920344] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [21194.944313] ata3.00: configured for UDMA/133 [21196.064030] ata8: COMRESET failed (errno=-32) [21196.064039] ata8: reset failed (errno=-32), retrying in 8 secs [21203.640031] ata8: limiting SATA link speed to 1.5 Gbps [21203.640038] ata8: hard resetting link [21205.904024] ata8: COMRESET failed (errno=-32) [21205.904034] ata8: reset failed (errno=-32), retrying in 8 secs [21213.640070] ata8: hard resetting link [21214.364057] ata8: SATA link down (SStatus 0 SControl 310) [21214.364074] ata8: EH complete [21214.544050] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [21214.544056] ata8: irq_stat 0x00000040, connection status changed [21214.544060] ata8: SError: { PHYInt CommWake DevExch } [21214.544068] ata8: hard resetting link [21215.780040] ata8: SATA link down (SStatus 0 SControl 300) [21215.780057] ata8: EH complete [21216.044057] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [21216.044062] ata8: irq_stat 0x00000040, connection status changed [21216.044065] ata8: SError: { PHYInt CommWake DevExch } [21216.044071] ata8: limiting SATA link speed to 1.5 Gbps [21216.044074] ata8: hard resetting link [21216.768063] ata8: SATA link down (SStatus 0 SControl 310) [21216.768080] ata8: EH complete [21218.344052] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [21218.344057] ata8: irq_stat 0x00000040, connection status changed [21218.344060] ata8: SError: { PHYInt CommWake DevExch } [21218.344066] ata8: limiting SATA link speed to 1.5 Gbps [21218.344069] ata8: hard resetting link [21219.072050] ata8: SATA link down (SStatus 0 SControl 310) [21219.072067] ata8: EH complete [21219.144080] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [21219.144086] ata8: irq_stat 0x00000040, connection status changed [21219.144090] ata8: SError: { PHYInt CommWake DevExch } [21219.144098] ata8: limiting SATA link speed to 1.5 Gbps [21219.144102] ata8: hard resetting link [21219.868043] ata8: SATA link down (SStatus 0 SControl 310) [21219.868060] ata8: EH complete [21220.248040] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [21220.248045] ata8: irq_stat 0x00000040, connection status changed [21220.248050] ata8: SError: { PHYInt CommWake DevExch } [21220.248057] ata8: limiting SATA link speed to 1.5 Gbps [21220.248061] ata8: hard resetting link [21220.972062] ata8: SATA link down (SStatus 0 SControl 310) [21220.972076] ata8: EH complete [29333.937295] sky2 0000:02:00.0 eth0: disabling interface [29333.939186] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [29334.053841] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [29334.936748] PM: Syncing filesystems ... done. [29335.210991] PM: Preparing system for mem sleep [29335.668810] Freezing user space processes ... (elapsed 0.001 seconds) done. [29335.670774] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [29335.671930] PM: Entering mem sleep [29335.671973] Suspending console(s) (use no_console_suspend to debug) [29335.672693] sd 2:0:0:0: [sda] Synchronizing SCSI cache [29335.675396] sd 2:0:0:0: [sda] Stopping disk [29335.675854] i8042 kbd 00:06: System wakeup enabled by ACPI [29335.676249] serial 00:04: disabled [29335.676255] serial 00:04: System wakeup disabled by ACPI [29335.736062] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [29335.736065] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [29335.736144] <6>[fglrx] IRQ 31 Disabled [29335.736374] <6>[fglrx] Preparing suspend fglrx in kernel. [29335.800033] usb 1-3: reset high-speed USB device number 2 using ehci-pci [29336.148660] <6>[fglrx] Suspending fglrx in kernel completed. [29336.148662] <6>[fglrx] Power down the ASIC . [29336.148737] PM: suspend of devices complete after 476.353 msecs [29336.149184] PM: late suspend of devices complete after 0.444 msecs [29336.149713] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [29336.149770] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [29336.149797] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [29336.149827] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [29336.149927] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [29336.149978] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [29336.150001] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [29336.150033] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [29336.304092] PM: noirq suspend of devices complete after 154.903 msecs [29336.304758] ACPI: Preparing to enter system sleep state S3 [29336.305044] PM: Saving platform NVS memory [29336.305449] Disabling non-boot CPUs ... [29336.306801] kvm: disabling virtualization on CPU1 [29336.306816] smpboot: CPU 1 is now offline [29336.308614] kvm: disabling virtualization on CPU2 [29336.308689] smpboot: CPU 2 is now offline [29336.310401] kvm: disabling virtualization on CPU3 [29336.310419] smpboot: CPU 3 is now offline [29336.310578] ACPI: Low-level resume complete [29336.310578] PM: Restoring platform NVS memory [29336.310578] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [29336.310578] Enabling non-boot CPUs ... [29336.310578] x86: Booting SMP configuration: [29336.310578] smpboot: Booting Node 0 Processor 1 APIC 0x1 [29336.306813] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [29336.306813] kvm: enabling virtualization on CPU1 [29336.329701] CPU1 is up [29336.329724] smpboot: Booting Node 0 Processor 2 APIC 0x2 [29336.308622] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [29336.308622] kvm: enabling virtualization on CPU2 [29336.348640] CPU2 is up [29336.348681] smpboot: Booting Node 0 Processor 3 APIC 0x3 [29336.310413] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [29336.310413] kvm: enabling virtualization on CPU3 [29336.367640] CPU3 is up [29336.371155] ACPI: Waking up from system sleep state S3 [29336.371769] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [29336.371809] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [29336.371847] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [29336.372118] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [29336.372167] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [29336.372192] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [29336.384137] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [29336.388289] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [29336.528186] PM: noirq resume of devices complete after 156.546 msecs [29336.528713] PM: early resume of devices complete after 0.497 msecs [29336.528774] usb usb3: root hub lost power or was reset [29336.528775] usb usb4: root hub lost power or was reset [29336.528820] usb usb5: root hub lost power or was reset [29336.528899] usb usb6: root hub lost power or was reset [29336.528933] usb usb7: root hub lost power or was reset [29336.528955] usb usb8: root hub lost power or was reset [29336.540465] sd 2:0:0:0: [sda] Starting disk [29336.544108] rtc_cmos 00:01: System wakeup disabled by ACPI [29336.544901] serial 00:04: activated [29336.544914] i8042 kbd 00:06: System wakeup disabled by ACPI [29336.555202] <6>[fglrx] Power up the ASIC [29336.577154] <6>[fglrx] Preparing resume fglrx in kernel. [29336.597800] <6>[fglrx] Resuming fglrx in kernel completed. [29336.597871] <6>[fglrx] IRQ 31 Enabled [29336.716548] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [29336.716550] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [29336.724528] ata5.00: configured for UDMA/33 [29336.866640] ata4: SATA link down (SStatus 0 SControl 300) [29336.868032] ata8: SATA link down (SStatus 0 SControl 310) [29336.868064] ata7: SATA link down (SStatus 0 SControl 300) [29337.012031] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [29337.096047] firewire_core 0000:05:03.0: rediscovered device fw0 [29337.186641] ata2.00: SATA link down (SStatus 0 SControl 300) [29337.186651] ata2.01: SATA link down (SStatus 0 SControl 300) [29337.197277] ata1.00: SATA link down (SStatus 0 SControl 300) [29337.197288] ata1.01: SATA link down (SStatus 0 SControl 300) [29337.484072] usb 5-1: reset full-speed USB device number 4 using uhci_hcd [29337.697206] PM: resume of devices complete after 1168.490 msecs [29337.846524] ieee80211 phy6: Selected rate control algorithm 'minstrel_ht' [29337.846835] ieee80211 phy6: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [29337.857651] rtl8187: Customer ID is 0x00 [29337.858265] rtl8187: wireless switch is on [29337.858766] PM: Finishing wakeup. [29337.858768] Restarting tasks ... done. [29337.903818] sky2 0000:02:00.0 eth0: enabling interface [29341.090199] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [29342.048018] ata3: link is slow to respond, please be patient (ready=0) [29342.236038] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen [29342.236044] ata8: irq_stat 0x00000040, connection status changed [29342.236048] ata8: SError: { DevExch } [29342.236055] ata8: hard resetting link [29343.632051] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [29343.644132] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [29343.644137] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [29343.644312] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [29343.644316] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [29343.672287] ata3.00: configured for UDMA/133 [29344.512025] ata8: COMRESET failed (errno=-32) [29344.512035] ata8: reset failed (errno=-32), retrying in 8 secs [29352.236020] ata8: limiting SATA link speed to 1.5 Gbps [29352.236026] ata8: hard resetting link [29353.376033] ata8: SATA link down (SStatus 0 SControl 310) [29353.376050] ata8: EH complete [29353.444033] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [29353.444038] ata8: irq_stat 0x00000040, connection status changed [29353.444043] ata8: SError: { PHYInt CommWake DevExch } [29353.444049] ata8: hard resetting link [29354.168035] ata8: SATA link down (SStatus 0 SControl 300) [29354.168051] ata8: EH complete [29354.344033] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [29354.344039] ata8: irq_stat 0x00000040, connection status changed [29354.344043] ata8: SError: { PHYInt CommWake DevExch } [29354.344050] ata8: limiting SATA link speed to 1.5 Gbps [29354.344054] ata8: hard resetting link [29355.068055] ata8: SATA link down (SStatus 0 SControl 310) [29355.068071] ata8: EH complete [29355.344476] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [29355.344483] ata8: irq_stat 0x00000040, connection status changed [29355.344486] ata8: SError: { PHYInt CommWake DevExch } [29355.344494] ata8: limiting SATA link speed to 1.5 Gbps [29355.344498] ata8: hard resetting link [29356.068037] ata8: SATA link down (SStatus 0 SControl 310) [29356.068054] ata8: EH complete [29356.744031] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [29356.744036] ata8: irq_stat 0x00000040, connection status changed [29356.744041] ata8: SError: { PHYInt CommWake DevExch } [29356.744048] ata8: limiting SATA link speed to 1.5 Gbps [29356.744052] ata8: hard resetting link [29357.884035] ata8: SATA link down (SStatus 0 SControl 310) [29357.884051] ata8: EH complete [29357.944034] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [29357.944040] ata8: irq_stat 0x00000040, connection status changed [29357.944044] ata8: SError: { PHYInt CommWake DevExch } [29357.944051] ata8: limiting SATA link speed to 1.5 Gbps [29357.944055] ata8: hard resetting link [29358.668039] ata8: SATA link down (SStatus 0 SControl 310) [29358.668056] ata8: EH complete [29360.244044] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [29360.244050] ata8: irq_stat 0x00000040, connection status changed [29360.244054] ata8: SError: { PHYInt CommWake DevExch } [29360.244062] ata8: limiting SATA link speed to 1.5 Gbps [29360.244066] ata8: hard resetting link [29360.968054] ata8: SATA link down (SStatus 0 SControl 310) [29360.968068] ata8: EH complete [29361.244064] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [29361.244070] ata8: irq_stat 0x00000040, connection status changed [29361.244073] ata8: SError: { PHYInt CommWake DevExch } [29361.244080] ata8: limiting SATA link speed to 1.5 Gbps [29361.244084] ata8: hard resetting link [29361.968073] ata8: SATA link down (SStatus 0 SControl 310) [29361.968090] ata8: EH complete [29362.344079] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [29362.344087] ata8: irq_stat 0x00000040, connection status changed [29362.344092] ata8: SError: { PHYInt CommWake DevExch } [29362.344101] ata8: limiting SATA link speed to 1.5 Gbps [29362.344106] ata8: hard resetting link [29363.068068] ata8: SATA link down (SStatus 0 SControl 310) [29363.068092] ata8: EH complete [29363.244040] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [29363.244047] ata8: irq_stat 0x00000040, connection status changed [29363.244051] ata8: SError: { PHYInt CommWake DevExch } [29363.244059] ata8: limiting SATA link speed to 1.5 Gbps [29363.244063] ata8: hard resetting link [29363.968036] ata8: SATA link down (SStatus 0 SControl 310) [29363.968053] ata8: EH complete [29365.344028] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [29365.344033] ata8: irq_stat 0x00000040, connection status changed [29365.344037] ata8: SError: { PHYInt CommWake DevExch } [29365.344044] ata8: limiting SATA link speed to 1.5 Gbps [29365.344048] ata8: hard resetting link [29366.068032] ata8: SATA link down (SStatus 0 SControl 310) [29366.068047] ata8: EH complete [31054.270350] audit_printk_skb: 39 callbacks suppressed [31054.270355] audit: type=1400 audit(1439653257.955:25): apparmor="DENIED" operation="chmod" profile="/usr/bin/evince" name="/home/ryan/.config/ibus/bus/" pid=20419 comm="evince" requested_mask="w" denied_mask="w" fsuid=1000 ouid=0 [34393.760030] audit: type=1400 audit(1439656597.444:26): apparmor="DENIED" operation="chmod" profile="/usr/bin/evince" name="/home/ryan/.config/ibus/bus/" pid=20851 comm="evince" requested_mask="w" denied_mask="w" fsuid=1000 ouid=0 [43911.123247] sky2 0000:02:00.0 eth0: disabling interface [43911.125237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [43911.281957] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [43911.411195] PM: Syncing filesystems ... done. [43911.682866] PM: Preparing system for mem sleep [43911.814163] Assertion failed in ../../../../../../../../drivers/2d/lnx/fgl/drm/kernel/hal_evergreen.c at line: 69 [43912.360522] Freezing user space processes ... (elapsed 0.014 seconds) done. [43912.375470] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [43912.376650] PM: Entering mem sleep [43912.376697] Suspending console(s) (use no_console_suspend to debug) [43912.377329] sd 2:0:0:0: [sda] Synchronizing SCSI cache [43912.377509] sd 2:0:0:0: [sda] Stopping disk [43912.380294] i8042 kbd 00:06: System wakeup enabled by ACPI [43912.380583] serial 00:04: disabled [43912.380587] serial 00:04: System wakeup disabled by ACPI [43912.444061] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [43912.444063] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [43912.444131] <6>[fglrx] IRQ 31 Disabled [43912.444490] <6>[fglrx] Preparing suspend fglrx in kernel. [43912.508030] usb 1-3: reset high-speed USB device number 2 using ehci-pci [43912.854467] <6>[fglrx] Suspending fglrx in kernel completed. [43912.854469] <6>[fglrx] Power down the ASIC . [43912.854545] PM: suspend of devices complete after 477.507 msecs [43912.855215] PM: late suspend of devices complete after 0.666 msecs [43912.855742] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [43912.855745] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [43912.855810] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [43912.855836] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [43912.855938] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [43912.855975] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [43912.856046] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [43912.856106] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [43913.008082] PM: noirq suspend of devices complete after 152.863 msecs [43913.008585] ACPI: Preparing to enter system sleep state S3 [43913.008852] PM: Saving platform NVS memory [43913.009265] Disabling non-boot CPUs ... [43913.010634] kvm: disabling virtualization on CPU1 [43913.010652] smpboot: CPU 1 is now offline [43913.012457] kvm: disabling virtualization on CPU2 [43913.012486] smpboot: CPU 2 is now offline [43913.014189] kvm: disabling virtualization on CPU3 [43913.014209] smpboot: CPU 3 is now offline [43913.014384] ACPI: Low-level resume complete [43913.014384] PM: Restoring platform NVS memory [43913.014384] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [43913.014384] Enabling non-boot CPUs ... [43913.014384] x86: Booting SMP configuration: [43913.014384] smpboot: Booting Node 0 Processor 1 APIC 0x1 [43913.010648] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [43913.010648] kvm: enabling virtualization on CPU1 [43913.033601] CPU1 is up [43913.033626] smpboot: Booting Node 0 Processor 2 APIC 0x2 [43913.012462] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [43913.012462] kvm: enabling virtualization on CPU2 [43913.052542] CPU2 is up [43913.052582] smpboot: Booting Node 0 Processor 3 APIC 0x3 [43913.014204] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [43913.014204] kvm: enabling virtualization on CPU3 [43913.071550] CPU3 is up [43913.075071] ACPI: Waking up from system sleep state S3 [43913.075704] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [43913.075726] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [43913.075750] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [43913.075904] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [43913.075960] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [43913.075981] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [43913.088111] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [43913.088213] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [43913.232181] PM: noirq resume of devices complete after 156.623 msecs [43913.232523] PM: early resume of devices complete after 0.315 msecs [43913.232600] usb usb3: root hub lost power or was reset [43913.232603] usb usb4: root hub lost power or was reset [43913.232610] usb usb5: root hub lost power or was reset [43913.232685] usb usb6: root hub lost power or was reset [43913.232696] usb usb7: root hub lost power or was reset [43913.232742] usb usb8: root hub lost power or was reset [43913.238666] sd 2:0:0:0: [sda] Starting disk [43913.248070] rtc_cmos 00:01: System wakeup disabled by ACPI [43913.248795] serial 00:04: activated [43913.248809] i8042 kbd 00:06: System wakeup disabled by ACPI [43913.258991] <6>[fglrx] Power up the ASIC [43913.281041] <6>[fglrx] Preparing resume fglrx in kernel. [43913.301574] <6>[fglrx] Resuming fglrx in kernel completed. [43913.301646] <6>[fglrx] IRQ 31 Enabled [43913.416527] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [43913.416529] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [43913.424527] ata5.00: configured for UDMA/33 [43913.568040] ata7: SATA link down (SStatus 0 SControl 300) [43913.568055] usb 5-1: reset full-speed USB device number 4 using uhci_hcd [43913.570639] ata4: SATA link down (SStatus 0 SControl 300) [43913.788040] firewire_core 0000:05:03.0: rediscovered device fw0 [43913.886648] ata1.00: SATA link down (SStatus 0 SControl 300) [43913.886659] ata1.01: SATA link down (SStatus 0 SControl 300) [43913.897306] ata2.00: SATA link down (SStatus 0 SControl 300) [43913.897317] ata2.01: SATA link down (SStatus 0 SControl 300) [43913.960039] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [43914.463716] PM: resume of devices complete after 1231.189 msecs [43914.584030] ata8: SATA link down (SStatus 0 SControl 310) [43914.612723] ieee80211 phy7: Selected rate control algorithm 'minstrel_ht' [43914.613028] ieee80211 phy7: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [43914.623852] rtl8187: Customer ID is 0x00 [43914.624466] rtl8187: wireless switch is on [43914.624954] PM: Finishing wakeup. [43914.624957] Restarting tasks ... done. [43914.646727] sky2 0000:02:00.0 eth0: enabling interface [43917.722943] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [43918.780028] ata3: link is slow to respond, please be patient (ready=0) [43920.180062] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [43920.204141] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [43920.204147] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [43920.204332] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [43920.204337] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [43920.228299] ata3.00: configured for UDMA/133 [43996.904032] capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [53554.983097] sky2 0000:02:00.0 eth0: disabling interface [53555.188244] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [53555.806875] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [53557.606973] PM: Syncing filesystems ... done. [53557.988066] PM: Preparing system for mem sleep [53559.284068] Freezing user space processes ... (elapsed 0.113 seconds) done. [53559.397280] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [53559.398448] PM: Entering mem sleep [53559.398487] Suspending console(s) (use no_console_suspend to debug) [53559.399211] sd 2:0:0:0: [sda] Synchronizing SCSI cache [53559.399332] sd 2:0:0:0: [sda] Stopping disk [53559.402389] i8042 kbd 00:06: System wakeup enabled by ACPI [53559.402779] serial 00:04: disabled [53559.402785] serial 00:04: System wakeup disabled by ACPI [53559.464093] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [53559.464096] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [53559.464176] <6>[fglrx] IRQ 31 Disabled [53559.464583] <6>[fglrx] Preparing suspend fglrx in kernel. [53559.528031] usb 1-3: reset high-speed USB device number 2 using ehci-pci [53559.876873] <6>[fglrx] Suspending fglrx in kernel completed. [53559.876875] <6>[fglrx] Power down the ASIC . [53559.876954] PM: suspend of devices complete after 478.070 msecs [53559.877712] PM: late suspend of devices complete after 0.754 msecs [53559.878252] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [53559.878254] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [53559.878305] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [53559.878357] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [53559.878514] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [53559.878514] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [53559.878579] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [53559.878604] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [53560.032081] PM: noirq suspend of devices complete after 154.366 msecs [53560.032718] ACPI: Preparing to enter system sleep state S3 [53560.032987] PM: Saving platform NVS memory [53560.033397] Disabling non-boot CPUs ... [53560.034744] kvm: disabling virtualization on CPU1 [53560.034758] smpboot: CPU 1 is now offline [53560.036581] kvm: disabling virtualization on CPU2 [53560.036611] smpboot: CPU 2 is now offline [53560.038358] kvm: disabling virtualization on CPU3 [53560.038376] smpboot: CPU 3 is now offline [53560.038590] ACPI: Low-level resume complete [53560.038590] PM: Restoring platform NVS memory [53560.038590] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [53560.038590] Enabling non-boot CPUs ... [53560.038590] x86: Booting SMP configuration: [53560.038590] smpboot: Booting Node 0 Processor 1 APIC 0x1 [53560.034754] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [53560.034754] kvm: enabling virtualization on CPU1 [53560.057731] CPU1 is up [53560.057755] smpboot: Booting Node 0 Processor 2 APIC 0x2 [53560.036587] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [53560.036587] kvm: enabling virtualization on CPU2 [53560.076679] CPU2 is up [53560.076724] smpboot: Booting Node 0 Processor 3 APIC 0x3 [53560.038371] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [53560.038371] kvm: enabling virtualization on CPU3 [53560.095683] CPU3 is up [53560.099198] ACPI: Waking up from system sleep state S3 [53560.099842] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [53560.099858] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [53560.099890] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [53560.100070] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [53560.100127] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [53560.100142] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [53560.112067] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [53560.116118] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [53560.256185] PM: noirq resume of devices complete after 156.496 msecs [53560.256581] PM: early resume of devices complete after 0.370 msecs [53560.256662] usb usb3: root hub lost power or was reset [53560.256673] usb usb5: root hub lost power or was reset [53560.256674] usb usb4: root hub lost power or was reset [53560.256756] usb usb6: root hub lost power or was reset [53560.256763] usb usb7: root hub lost power or was reset [53560.256804] usb usb8: root hub lost power or was reset [53560.264768] sd 2:0:0:0: [sda] Starting disk [53560.272088] rtc_cmos 00:01: System wakeup disabled by ACPI [53560.272812] serial 00:04: activated [53560.272828] i8042 kbd 00:06: System wakeup disabled by ACPI [53560.283136] <6>[fglrx] Power up the ASIC [53560.305577] <6>[fglrx] Preparing resume fglrx in kernel. [53560.326270] <6>[fglrx] Resuming fglrx in kernel completed. [53560.326342] <6>[fglrx] IRQ 31 Enabled [53560.444533] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [53560.444535] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [53560.452580] ata5.00: configured for UDMA/33 [53560.586627] ata4: SATA link down (SStatus 0 SControl 300) [53560.592045] usb 5-1: reset full-speed USB device number 4 using uhci_hcd [53560.596053] ata7: SATA link down (SStatus 0 SControl 300) [53560.596086] ata8: SATA link down (SStatus 0 SControl 310) [53560.812081] firewire_core 0000:05:03.0: rediscovered device fw0 [53560.906648] ata1.00: SATA link down (SStatus 0 SControl 300) [53560.906659] ata1.01: SATA link down (SStatus 0 SControl 300) [53560.917292] ata2.00: SATA link down (SStatus 0 SControl 300) [53560.917303] ata2.01: SATA link down (SStatus 0 SControl 300) [53560.984093] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [53561.491192] PM: resume of devices complete after 1234.608 msecs [53561.640135] ieee80211 phy8: Selected rate control algorithm 'minstrel_ht' [53561.640450] ieee80211 phy8: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [53561.651240] rtl8187: Customer ID is 0x00 [53561.651853] rtl8187: wireless switch is on [53561.652364] PM: Finishing wakeup. [53561.652366] Restarting tasks ... done. [53565.792046] ata3: link is slow to respond, please be patient (ready=0) [53567.304078] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [53567.328139] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [53567.328144] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [53567.328327] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [53567.328332] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [53567.356302] ata3.00: configured for UDMA/133 [53568.267636] sky2 0000:02:00.0 eth0: enabling interface [53571.288883] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [60903.632507] sky2 0000:02:00.0 eth0: disabling interface [60903.634490] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [60903.731227] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [60903.986955] PM: Syncing filesystems ... done. [60904.229096] PM: Preparing system for mem sleep [60904.336074] Assertion failed in ../../../../../../../../drivers/2d/lnx/fgl/drm/kernel/hal_evergreen.c at line: 69 [60904.764602] Freezing user space processes ... (elapsed 0.002 seconds) done. [60904.766820] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [60904.767988] PM: Entering mem sleep [60904.768062] Suspending console(s) (use no_console_suspend to debug) [60904.768796] sd 2:0:0:0: [sda] Synchronizing SCSI cache [60904.771496] sd 2:0:0:0: [sda] Stopping disk [60904.771823] i8042 kbd 00:06: System wakeup enabled by ACPI [60904.772240] serial 00:04: disabled [60904.772246] serial 00:04: System wakeup disabled by ACPI [60904.828062] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [60904.828064] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [60904.828145] <6>[fglrx] IRQ 31 Disabled [60904.828576] <6>[fglrx] Preparing suspend fglrx in kernel. [60904.912034] usb 1-3: reset high-speed USB device number 2 using ehci-pci [60905.240732] <6>[fglrx] Suspending fglrx in kernel completed. [60905.240734] <6>[fglrx] Power down the ASIC . [60905.240824] PM: suspend of devices complete after 472.370 msecs [60905.241494] PM: late suspend of devices complete after 0.666 msecs [60905.242028] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [60905.242098] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [60905.242126] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [60905.242169] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [60905.242265] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [60905.242267] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [60905.242289] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [60905.242315] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [60905.396095] PM: noirq suspend of devices complete after 154.597 msecs [60905.396598] ACPI: Preparing to enter system sleep state S3 [60905.396866] PM: Saving platform NVS memory [60905.397270] Disabling non-boot CPUs ... [60905.398658] kvm: disabling virtualization on CPU1 [60905.398675] smpboot: CPU 1 is now offline [60905.400516] kvm: disabling virtualization on CPU2 [60905.400564] smpboot: CPU 2 is now offline [60905.402329] kvm: disabling virtualization on CPU3 [60905.402347] smpboot: CPU 3 is now offline [60905.402533] ACPI: Low-level resume complete [60905.402533] PM: Restoring platform NVS memory [60905.402533] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [60905.402533] Enabling non-boot CPUs ... [60905.402533] x86: Booting SMP configuration: [60905.402533] smpboot: Booting Node 0 Processor 1 APIC 0x1 [60905.398670] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [60905.398670] kvm: enabling virtualization on CPU1 [60905.421733] CPU1 is up [60905.421756] smpboot: Booting Node 0 Processor 2 APIC 0x2 [60905.400521] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [60905.400521] kvm: enabling virtualization on CPU2 [60905.440671] CPU2 is up [60905.440712] smpboot: Booting Node 0 Processor 3 APIC 0x3 [60905.402342] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [60905.402342] kvm: enabling virtualization on CPU3 [60905.459671] CPU3 is up [60905.463185] ACPI: Waking up from system sleep state S3 [60905.463802] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [60905.463870] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [60905.463899] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [60905.464142] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [60905.464168] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [60905.464189] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [60905.476081] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [60905.480157] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [60905.620184] PM: noirq resume of devices complete after 156.510 msecs [60905.620782] PM: early resume of devices complete after 0.568 msecs [60905.620845] usb usb3: root hub lost power or was reset [60905.620846] usb usb4: root hub lost power or was reset [60905.620890] usb usb5: root hub lost power or was reset [60905.620965] usb usb6: root hub lost power or was reset [60905.621000] usb usb7: root hub lost power or was reset [60905.621023] usb usb8: root hub lost power or was reset [60905.626672] sd 2:0:0:0: [sda] Starting disk [60905.636102] rtc_cmos 00:01: System wakeup disabled by ACPI [60905.636823] serial 00:04: activated [60905.636837] i8042 kbd 00:06: System wakeup disabled by ACPI [60905.647280] <6>[fglrx] Power up the ASIC [60905.669746] <6>[fglrx] Preparing resume fglrx in kernel. [60905.690370] <6>[fglrx] Resuming fglrx in kernel completed. [60905.690442] <6>[fglrx] IRQ 31 Enabled [60905.808541] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [60905.808543] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [60905.824526] ata5.00: configured for UDMA/33 [60905.954643] ata4: SATA link down (SStatus 0 SControl 300) [60905.956037] ata8: SATA link down (SStatus 0 SControl 310) [60905.964043] ata7: SATA link down (SStatus 0 SControl 300) [60906.016763] usb 5-1: reset full-speed USB device number 4 using uhci_hcd [60906.188081] firewire_core 0000:05:03.0: rediscovered device fw0 [60906.282693] ata1.00: SATA link down (SStatus 0 SControl 300) [60906.282704] ata1.01: SATA link down (SStatus 0 SControl 300) [60906.293339] ata2.00: SATA link down (SStatus 0 SControl 300) [60906.293349] ata2.01: SATA link down (SStatus 0 SControl 300) [60906.412030] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [60906.859835] PM: resume of devices complete after 1239.049 msecs [60907.008792] ieee80211 phy9: Selected rate control algorithm 'minstrel_ht' [60907.009102] ieee80211 phy9: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [60907.019919] rtl8187: Customer ID is 0x00 [60907.020533] rtl8187: wireless switch is on [60907.021042] PM: Finishing wakeup. [60907.021045] Restarting tasks ... done. [60909.216057] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen [60909.216063] ata8: irq_stat 0x00000040, connection status changed [60909.216067] ata8: SError: { DevExch } [60909.216074] ata8: hard resetting link [60909.944041] ata8: SATA link down (SStatus 0 SControl 300) [60909.944055] ata8: EH complete [60910.020037] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [60910.020041] ata8: irq_stat 0x00000040, connection status changed [60910.020044] ata8: SError: { CommWake DevExch } [60910.020049] ata8: hard resetting link [60911.156026] ata3: link is slow to respond, please be patient (ready=0) [60912.372029] ata8: COMRESET failed (errno=-32) [60912.372039] ata8: reset failed (errno=-32), retrying in 8 secs [60912.684149] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [60912.696136] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [60912.696140] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [60912.696324] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [60912.696328] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [60912.724302] ata3.00: configured for UDMA/133 [60912.867518] sky2 0000:02:00.0 eth0: enabling interface [60915.887347] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [60920.020055] ata8: limiting SATA link speed to 1.5 Gbps [60920.020061] ata8: hard resetting link [60921.256033] ata8: SATA link down (SStatus 0 SControl 310) [60921.256049] ata8: EH complete [60921.332032] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [60921.332037] ata8: irq_stat 0x00000040, connection status changed [60921.332041] ata8: SError: { PHYInt CommWake DevExch } [60921.332049] ata8: limiting SATA link speed to 1.5 Gbps [60921.332052] ata8: hard resetting link [60922.920035] ata8: SATA link down (SStatus 0 SControl 310) [60922.920052] ata8: EH complete [60923.032032] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [60923.032037] ata8: irq_stat 0x00000040, connection status changed [60923.032041] ata8: SError: { PHYInt CommWake DevExch } [60923.032048] ata8: limiting SATA link speed to 1.5 Gbps [60923.032052] ata8: hard resetting link [60923.756040] ata8: SATA link down (SStatus 0 SControl 310) [60923.756057] ata8: EH complete [60924.432039] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [60924.432045] ata8: irq_stat 0x00000040, connection status changed [60924.432049] ata8: SError: { PHYInt CommWake DevExch } [60924.432057] ata8: limiting SATA link speed to 1.5 Gbps [60924.432060] ata8: hard resetting link [60925.156036] ata8: SATA link down (SStatus 0 SControl 310) [60925.156051] ata8: EH complete [60925.232038] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [60925.232043] ata8: irq_stat 0x00000040, connection status changed [60925.232047] ata8: SError: { PHYInt CommWake DevExch } [60925.232054] ata8: limiting SATA link speed to 1.5 Gbps [60925.232057] ata8: hard resetting link [60925.956037] ata8: SATA link down (SStatus 0 SControl 310) [60925.956049] ata8: EH complete [60926.132064] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [60926.132070] ata8: irq_stat 0x00000040, connection status changed [60926.132075] ata8: SError: { PHYInt CommWake DevExch } [60926.132083] ata8: limiting SATA link speed to 1.5 Gbps [60926.132087] ata8: hard resetting link [60926.856045] ata8: SATA link down (SStatus 0 SControl 310) [60926.856061] ata8: EH complete [60926.932064] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [60926.932069] ata8: irq_stat 0x00000040, connection status changed [60926.932073] ata8: SError: { PHYInt CommWake DevExch } [60926.932080] ata8: limiting SATA link speed to 1.5 Gbps [60926.932084] ata8: hard resetting link [60927.656048] ata8: SATA link down (SStatus 0 SControl 310) [60927.656065] ata8: EH complete [60928.332078] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [60928.332082] ata8: irq_stat 0x00000040, connection status changed [60928.332087] ata8: SError: { PHYInt CommWake DevExch } [60928.332094] ata8: limiting SATA link speed to 1.5 Gbps [60928.332098] ata8: hard resetting link [60929.216049] ata8: SATA link down (SStatus 0 SControl 310) [60929.216065] ata8: EH complete [60930.132064] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [60930.132069] ata8: irq_stat 0x00000040, connection status changed [60930.132073] ata8: SError: { PHYInt CommWake DevExch } [60930.132080] ata8: limiting SATA link speed to 1.5 Gbps [60930.132084] ata8: hard resetting link [60930.856101] ata8: SATA link down (SStatus 0 SControl 310) [60930.856114] ata8: EH complete [68113.114815] sky2 0000:02:00.0 eth0: disabling interface [68113.116870] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [68113.225984] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [68113.248344] PM: Syncing filesystems ... done. [68113.449977] PM: Preparing system for mem sleep [68113.536436] Assertion failed in ../../../../../../../../drivers/2d/lnx/fgl/drm/kernel/hal_evergreen.c at line: 69 [68113.541307] Assertion failed in ../../../../../../../../drivers/2d/lnx/fgl/drm/kernel/hal_evergreen.c at line: 69 [68113.979454] Freezing user space processes ... (elapsed 0.001 seconds) done. [68113.981428] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [68113.982592] PM: Entering mem sleep [68113.982637] Suspending console(s) (use no_console_suspend to debug) [68113.983287] sd 2:0:0:0: [sda] Synchronizing SCSI cache [68113.983437] sd 2:0:0:0: [sda] Stopping disk [68113.986330] i8042 kbd 00:06: System wakeup enabled by ACPI [68113.986614] serial 00:04: disabled [68113.986618] serial 00:04: System wakeup disabled by ACPI [68114.048060] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [68114.048062] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [68114.048129] <6>[fglrx] IRQ 31 Disabled [68114.048498] <6>[fglrx] Preparing suspend fglrx in kernel. [68114.116030] usb 1-3: reset high-speed USB device number 2 using ehci-pci [68114.454703] <6>[fglrx] Suspending fglrx in kernel completed. [68114.454704] <6>[fglrx] Power down the ASIC . [68114.454781] PM: suspend of devices complete after 471.796 msecs [68114.455438] PM: late suspend of devices complete after 0.653 msecs [68114.456013] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [68114.456017] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [68114.456065] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [68114.456088] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [68114.456201] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [68114.456276] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [68114.456304] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [68114.456328] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [68114.608101] PM: noirq suspend of devices complete after 152.660 msecs [68114.608603] ACPI: Preparing to enter system sleep state S3 [68114.608870] PM: Saving platform NVS memory [68114.609280] Disabling non-boot CPUs ... [68114.610631] kvm: disabling virtualization on CPU1 [68114.610651] smpboot: CPU 1 is now offline [68114.612460] kvm: disabling virtualization on CPU2 [68114.612498] smpboot: CPU 2 is now offline [68114.614202] kvm: disabling virtualization on CPU3 [68114.614221] smpboot: CPU 3 is now offline [68114.614398] ACPI: Low-level resume complete [68114.614398] PM: Restoring platform NVS memory [68114.614398] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [68114.614398] Enabling non-boot CPUs ... [68114.614398] x86: Booting SMP configuration: [68114.614398] smpboot: Booting Node 0 Processor 1 APIC 0x1 [68114.610640] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [68114.610640] kvm: enabling virtualization on CPU1 [68114.633552] CPU1 is up [68114.633576] smpboot: Booting Node 0 Processor 2 APIC 0x2 [68114.612465] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [68114.612465] kvm: enabling virtualization on CPU2 [68114.652498] CPU2 is up [68114.652539] smpboot: Booting Node 0 Processor 3 APIC 0x3 [68114.614216] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [68114.614216] kvm: enabling virtualization on CPU3 [68114.671500] CPU3 is up [68114.675025] ACPI: Waking up from system sleep state S3 [68114.675664] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [68114.675682] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [68114.675714] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [68114.675870] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [68114.675927] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [68114.675942] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [68114.688086] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [68114.688287] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [68114.832185] PM: noirq resume of devices complete after 156.672 msecs [68114.832674] PM: early resume of devices complete after 0.463 msecs [68114.832757] usb usb3: root hub lost power or was reset [68114.832762] usb usb4: root hub lost power or was reset [68114.832763] usb usb5: root hub lost power or was reset [68114.832845] usb usb6: root hub lost power or was reset [68114.832858] usb usb7: root hub lost power or was reset [68114.832900] usb usb8: root hub lost power or was reset [68114.844501] sd 2:0:0:0: [sda] Starting disk [68114.848098] rtc_cmos 00:01: System wakeup disabled by ACPI [68114.848759] serial 00:04: activated [68114.848770] i8042 kbd 00:06: System wakeup disabled by ACPI [68114.859162] <6>[fglrx] Power up the ASIC [68114.881619] <6>[fglrx] Preparing resume fglrx in kernel. [68114.902189] <6>[fglrx] Resuming fglrx in kernel completed. [68114.902261] <6>[fglrx] IRQ 31 Enabled [68115.015720] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [68115.015722] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [68115.028527] ata5.00: configured for UDMA/33 [68115.162632] ata4: SATA link down (SStatus 0 SControl 300) [68115.168037] ata7: SATA link down (SStatus 0 SControl 300) [68115.168070] ata8: SATA link down (SStatus 0 SControl 310) [68115.368115] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [68115.388055] firewire_core 0000:05:03.0: rediscovered device fw0 [68115.486656] ata2.00: SATA link down (SStatus 0 SControl 300) [68115.486666] ata2.01: SATA link down (SStatus 0 SControl 300) [68115.497297] ata1.00: SATA link down (SStatus 0 SControl 300) [68115.497307] ata1.01: SATA link down (SStatus 0 SControl 300) [68115.840064] usb 5-1: reset full-speed USB device number 4 using uhci_hcd [68116.054210] PM: resume of devices complete after 1221.532 msecs [68116.203506] ieee80211 phy10: Selected rate control algorithm 'minstrel_ht' [68116.203736] ieee80211 phy10: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [68116.214535] rtl8187: Customer ID is 0x00 [68116.215148] rtl8187: wireless switch is on [68116.215525] PM: Finishing wakeup. [68116.215527] Restarting tasks ... done. [68116.244190] sky2 0000:02:00.0 eth0: enabling interface [68119.209339] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [68120.340027] ata3: link is slow to respond, please be patient (ready=0) [68121.908059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [68121.916154] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [68121.916159] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [68121.916333] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [68121.916338] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [68121.948292] ata3.00: configured for UDMA/133 [75708.254131] sky2 0000:02:00.0 eth0: disabling interface [75708.256452] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [75708.438135] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [75709.998709] PM: Syncing filesystems ... done. [75710.239198] PM: Preparing system for mem sleep [75710.911018] Freezing user space processes ... (elapsed 0.001 seconds) done. [75710.913015] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [75710.914178] PM: Entering mem sleep [75710.914227] Suspending console(s) (use no_console_suspend to debug) [75710.914871] sd 2:0:0:0: [sda] Synchronizing SCSI cache [75710.915023] sd 2:0:0:0: [sda] Stopping disk [75710.917829] i8042 kbd 00:06: System wakeup enabled by ACPI [75710.918113] serial 00:04: disabled [75710.918117] serial 00:04: System wakeup disabled by ACPI [75710.980060] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [75710.980062] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [75710.980130] <6>[fglrx] IRQ 31 Disabled [75710.980520] <6>[fglrx] Preparing suspend fglrx in kernel. [75711.044025] usb 1-3: reset high-speed USB device number 2 using ehci-pci [75711.386754] <6>[fglrx] Suspending fglrx in kernel completed. [75711.386756] <6>[fglrx] Power down the ASIC . [75711.386830] PM: suspend of devices complete after 472.254 msecs [75711.387482] PM: late suspend of devices complete after 0.648 msecs [75711.388063] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [75711.388068] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [75711.388117] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [75711.388135] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [75711.388243] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [75711.388353] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [75711.388369] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [75711.388391] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [75711.540116] PM: noirq suspend of devices complete after 152.631 msecs [75711.540618] ACPI: Preparing to enter system sleep state S3 [75711.540884] PM: Saving platform NVS memory [75711.541294] Disabling non-boot CPUs ... [75711.542631] kvm: disabling virtualization on CPU1 [75711.542650] smpboot: CPU 1 is now offline [75711.544473] kvm: disabling virtualization on CPU2 [75711.544510] smpboot: CPU 2 is now offline [75711.545211] Broke affinity for irq 17 [75711.545218] Broke affinity for irq 18 [75711.545236] Broke affinity for irq 22 [75711.546265] kvm: disabling virtualization on CPU3 [75711.546285] smpboot: CPU 3 is now offline [75711.546484] ACPI: Low-level resume complete [75711.546484] PM: Restoring platform NVS memory [75711.546484] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [75711.546484] Enabling non-boot CPUs ... [75711.546484] x86: Booting SMP configuration: [75711.546484] smpboot: Booting Node 0 Processor 1 APIC 0x1 [75711.542641] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [75711.542641] kvm: enabling virtualization on CPU1 [75711.565622] CPU1 is up [75711.565646] smpboot: Booting Node 0 Processor 2 APIC 0x2 [75711.544479] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [75711.544479] kvm: enabling virtualization on CPU2 [75711.584569] CPU2 is up [75711.584610] smpboot: Booting Node 0 Processor 3 APIC 0x3 [75711.546280] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [75711.546280] kvm: enabling virtualization on CPU3 [75711.603563] CPU3 is up [75711.607085] ACPI: Waking up from system sleep state S3 [75711.607719] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [75711.607736] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [75711.607769] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [75711.607926] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [75711.607982] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [75711.607997] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [75711.620079] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [75711.620137] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [75711.764229] PM: noirq resume of devices complete after 156.660 msecs [75711.764771] PM: early resume of devices complete after 0.514 msecs [75711.764847] usb usb4: root hub lost power or was reset [75711.764856] usb usb3: root hub lost power or was reset [75711.764857] usb usb5: root hub lost power or was reset [75711.764946] usb usb6: root hub lost power or was reset [75711.764950] usb usb7: root hub lost power or was reset [75711.765001] usb usb8: root hub lost power or was reset [75711.780147] rtc_cmos 00:01: System wakeup disabled by ACPI [75711.780192] sd 2:0:0:0: [sda] Starting disk [75711.780832] serial 00:04: activated [75711.780843] i8042 kbd 00:06: System wakeup disabled by ACPI [75711.791271] <6>[fglrx] Power up the ASIC [75711.813965] <6>[fglrx] Preparing resume fglrx in kernel. [75711.834533] <6>[fglrx] Resuming fglrx in kernel completed. [75711.834604] <6>[fglrx] IRQ 31 Enabled [75711.952536] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [75711.952538] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [75711.968528] ata5.00: configured for UDMA/33 [75712.096028] ata8: SATA link down (SStatus 0 SControl 310) [75712.098647] ata4: SATA link down (SStatus 0 SControl 300) [75712.100043] ata7: SATA link down (SStatus 0 SControl 300) [75712.248038] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [75712.320053] firewire_core 0000:05:03.0: rediscovered device fw0 [75712.418643] ata2.00: SATA link down (SStatus 0 SControl 300) [75712.418654] ata2.01: SATA link down (SStatus 0 SControl 300) [75712.429285] ata1.00: SATA link down (SStatus 0 SControl 300) [75712.429295] ata1.01: SATA link down (SStatus 0 SControl 300) [75712.668037] usb 5-1: reset full-speed USB device number 4 using uhci_hcd [75712.877283] PM: resume of devices complete after 1112.509 msecs [75713.026360] ieee80211 phy11: Selected rate control algorithm 'minstrel_ht' [75713.026668] ieee80211 phy11: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [75713.037494] rtl8187: Customer ID is 0x00 [75713.038108] rtl8187: wireless switch is on [75713.038526] PM: Finishing wakeup. [75713.038528] Restarting tasks ... done. [75716.140037] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen [75716.140043] ata8: irq_stat 0x00000040, connection status changed [75716.140047] ata8: SError: { DevExch } [75716.140054] ata8: hard resetting link [75717.272013] ata3: link is slow to respond, please be patient (ready=0) [75717.620031] ata8: SATA link down (SStatus 0 SControl 300) [75717.620045] ata8: EH complete [75717.840024] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [75717.840029] ata8: irq_stat 0x00000040, connection status changed [75717.840032] ata8: SError: { PHYInt CommWake DevExch } [75717.840037] ata8: hard resetting link [75718.848050] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [75718.856129] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [75718.856134] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [75718.856309] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [75718.856314] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [75718.880300] ata3.00: configured for UDMA/133 [75719.176820] sky2 0000:02:00.0 eth0: enabling interface [75720.080043] ata8: COMRESET failed (errno=-32) [75720.080053] ata8: reset failed (errno=-32), retrying in 8 secs [75722.233572] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [75727.840023] ata8: limiting SATA link speed to 1.5 Gbps [75727.840028] ata8: hard resetting link [75728.564040] ata8: SATA link down (SStatus 0 SControl 310) [75728.564057] ata8: EH complete [75728.660036] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [75728.660041] ata8: irq_stat 0x00000040, connection status changed [75728.660046] ata8: SError: { PHYInt CommWake DevExch } [75728.660053] ata8: limiting SATA link speed to 1.5 Gbps [75728.660057] ata8: hard resetting link [75729.384037] ata8: SATA link down (SStatus 0 SControl 310) [75729.384053] ata8: EH complete [75729.460031] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [75729.460036] ata8: irq_stat 0x00000040, connection status changed [75729.460040] ata8: SError: { PHYInt CommWake DevExch } [75729.460047] ata8: limiting SATA link speed to 1.5 Gbps [75729.460051] ata8: hard resetting link [75730.504036] ata8: SATA link down (SStatus 0 SControl 310) [75730.504053] ata8: EH complete [75730.660034] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [75730.660041] ata8: irq_stat 0x00000040, connection status changed [75730.660045] ata8: SError: { PHYInt CommWake DevExch } [75730.660052] ata8: limiting SATA link speed to 1.5 Gbps [75730.660056] ata8: hard resetting link [75731.800035] ata8: SATA link down (SStatus 0 SControl 310) [75731.800050] ata8: EH complete [75731.860027] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [75731.860032] ata8: irq_stat 0x00000040, connection status changed [75731.860036] ata8: SError: { PHYInt CommWake DevExch } [75731.860042] ata8: limiting SATA link speed to 1.5 Gbps [75731.860046] ata8: hard resetting link [75732.584033] ata8: SATA link down (SStatus 0 SControl 310) [75732.584047] ata8: EH complete [75732.960030] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [75732.960034] ata8: irq_stat 0x00000040, connection status changed [75732.960039] ata8: SError: { PHYInt CommWake DevExch } [75732.960046] ata8: limiting SATA link speed to 1.5 Gbps [75732.960049] ata8: hard resetting link [75733.684037] ata8: SATA link down (SStatus 0 SControl 310) [75733.684054] ata8: EH complete [75735.264037] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [75735.264043] ata8: irq_stat 0x00000040, connection status changed [75735.264048] ata8: SError: { PHYInt CommWake DevExch } [75735.264056] ata8: limiting SATA link speed to 1.5 Gbps [75735.264060] ata8: hard resetting link [75735.988033] ata8: SATA link down (SStatus 0 SControl 310) [75735.988049] ata8: EH complete [75737.164036] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen [75737.164041] ata8: irq_stat 0x00000040, connection status changed [75737.164046] ata8: SError: { PHYInt CommWake DevExch } [75737.164053] ata8: limiting SATA link speed to 1.5 Gbps [75737.164057] ata8: hard resetting link [75737.888035] ata8: SATA link down (SStatus 0 SControl 310) [75737.888050] ata8: EH complete [76996.366426] sky2 0000:02:00.0 eth0: disabling interface [76996.368597] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [76996.517929] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [76996.574409] PM: Syncing filesystems ... done. [76996.982924] PM: Preparing system for mem sleep [76997.656459] Freezing user space processes ... (elapsed 0.002 seconds) done. [76997.658704] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [76997.659883] PM: Entering mem sleep [76997.659929] Suspending console(s) (use no_console_suspend to debug) [76997.660587] sd 2:0:0:0: [sda] Synchronizing SCSI cache [76997.660743] sd 2:0:0:0: [sda] Stopping disk [76997.663513] i8042 kbd 00:06: System wakeup enabled by ACPI [76997.663784] serial 00:04: disabled [76997.663788] serial 00:04: System wakeup disabled by ACPI [76997.724060] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed! [76997.724062] <3>[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000 [76997.724131] <6>[fglrx] IRQ 31 Disabled [76997.724601] <6>[fglrx] Preparing suspend fglrx in kernel. [76997.800023] usb 1-3: reset high-speed USB device number 2 using ehci-pci [76998.131004] <6>[fglrx] Suspending fglrx in kernel completed. [76998.131006] <6>[fglrx] Power down the ASIC . [76998.131078] PM: suspend of devices complete after 470.797 msecs [76998.131629] PM: late suspend of devices complete after 0.547 msecs [76998.132019] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [76998.132054] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [76998.132262] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [76998.132287] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [76998.132289] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [76998.132314] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [76998.132332] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [76998.132347] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [76998.284098] PM: noirq suspend of devices complete after 152.466 msecs [76998.284607] ACPI: Preparing to enter system sleep state S3 [76998.284811] PM: Saving platform NVS memory [76998.285132] Disabling non-boot CPUs ... [76998.286489] kvm: disabling virtualization on CPU1 [76998.286504] smpboot: CPU 1 is now offline [76998.288156] kvm: disabling virtualization on CPU2 [76998.288184] smpboot: CPU 2 is now offline [76998.288906] Broke affinity for irq 19 [76998.289940] kvm: disabling virtualization on CPU3 [76998.289948] smpboot: CPU 3 is now offline [76998.290104] ACPI: Low-level resume complete [76998.290104] PM: Restoring platform NVS memory [76998.290104] CPU0 microcode updated early to revision 0xba, date = 2010-10-03 [76998.290104] Enabling non-boot CPUs ... [76998.290104] x86: Booting SMP configuration: [76998.290104] smpboot: Booting Node 0 Processor 1 APIC 0x1 [76998.286499] CPU1 microcode updated early to revision 0xba, date = 2010-10-03 [76998.286499] kvm: enabling virtualization on CPU1 [76998.309280] CPU1 is up [76998.309304] smpboot: Booting Node 0 Processor 2 APIC 0x2 [76998.288159] CPU2 microcode updated early to revision 0xba, date = 2010-10-03 [76998.288159] kvm: enabling virtualization on CPU2 [76998.328230] CPU2 is up [76998.328270] smpboot: Booting Node 0 Processor 3 APIC 0x3 [76998.289945] CPU3 microcode updated early to revision 0xba, date = 2010-10-03 [76998.289945] kvm: enabling virtualization on CPU3 [76998.347253] CPU3 is up [76998.350776] ACPI: Waking up from system sleep state S3 [76998.351389] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [76998.351429] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [76998.351468] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [76998.351637] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [76998.351653] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [76998.351682] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [76998.364153] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [76998.364198] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [76998.504188] PM: noirq resume of devices complete after 152.928 msecs [76998.504784] PM: early resume of devices complete after 0.566 msecs [76998.504846] usb usb3: root hub lost power or was reset [76998.504847] usb usb4: root hub lost power or was reset [76998.504891] usb usb5: root hub lost power or was reset [76998.504969] usb usb6: root hub lost power or was reset [76998.505004] usb usb7: root hub lost power or was reset [76998.505026] usb usb8: root hub lost power or was reset [76998.516453] sd 2:0:0:0: [sda] Starting disk [76998.520135] rtc_cmos 00:01: System wakeup disabled by ACPI [76998.521024] serial 00:04: activated [76998.521036] i8042 kbd 00:06: System wakeup disabled by ACPI [76998.531236] <6>[fglrx] Power up the ASIC [76998.553967] <6>[fglrx] Preparing resume fglrx in kernel. [76998.574593] <6>[fglrx] Resuming fglrx in kernel completed. [76998.574664] <6>[fglrx] IRQ 31 Enabled [76998.687676] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [76998.687681] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [76998.700528] ata5.00: configured for UDMA/33 [76998.842684] ata4: SATA link down (SStatus 0 SControl 300) [76998.842713] ata8: SATA link down (SStatus 0 SControl 310) [76998.844033] ata7: SATA link down (SStatus 0 SControl 300) [76998.992032] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [76999.072057] firewire_core 0000:05:03.0: rediscovered device fw0 [76999.158647] ata1.00: SATA link down (SStatus 0 SControl 300) [76999.158657] ata1.01: SATA link down (SStatus 0 SControl 300) [76999.169285] ata2.00: SATA link down (SStatus 0 SControl 300) [76999.169295] ata2.01: SATA link down (SStatus 0 SControl 300) [76999.496202] PM: resume of devices complete after 991.416 msecs [76999.645268] ieee80211 phy12: Selected rate control algorithm 'minstrel_ht' [76999.645582] ieee80211 phy12: hwaddr 00:15:af:28:aa:ce, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [76999.656393] rtl8187: Customer ID is 0x00 [76999.657006] rtl8187: wireless switch is on [76999.657524] PM: Finishing wakeup. [76999.657526] Restarting tasks ... [76999.657581] usb 5-1: USB disconnect, device number 4 [76999.675218] done. [76999.695767] sky2 0000:02:00.0 eth0: enabling interface [76999.700034] systemd[1]: Unit suspend.target is bound to inactive unit systemd-suspend.service. Stopping, too. [77002.698697] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [77004.032027] ata3: link is slow to respond, please be patient (ready=0) [77005.600062] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [77005.608147] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [77005.608152] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [77005.608330] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [77005.608335] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [77005.632302] ata3.00: configured for UDMA/133 [77095.112032] usb 5-1: new full-speed USB device number 5 using uhci_hcd [77095.285058] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b [77095.285063] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [77095.285067] usb 5-1: Product: USB Receiver [77095.285071] usb 5-1: Manufacturer: Logitech [77095.305227] logitech-djreceiver 0003:046D:C52B.000E: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input2 [77095.428245] input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.000E/0003:046D:401B.000F/input/input32 [77095.428627] logitech-hidpp-device 0003:046D:401B.000F: input,hidraw2: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:1a.2-1:1 [77095.436414] input: Logitech K330 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.000E/0003:046D:4016.0010/input/input33 [77095.436661] logitech-hidpp-device 0003:046D:4016.0010: input,hidraw3: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:1a.2-1:2 [78375.402504] SGI XFS with ACLs, security attributes, realtime, no debug enabled [78375.588569] JFS: nTxBlock = 8192, nTxLock = 65536 [78375.758485] ntfs: driver 2.1.31 [Flags: R/O MODULE]. [78375.969470] QNX4 filesystem 0.2.3 registered. [78376.232009] raid6: sse2x1 2975 MB/s [78376.300008] raid6: sse2x2 3333 MB/s [78376.368009] raid6: sse2x4 4751 MB/s [78376.368011] raid6: using algorithm sse2x4 (4751 MB/s) [78376.368014] raid6: using ssse3x2 recovery algorithm [78376.414906] xor: measuring software checksum speed [78376.452010] prefetch64-sse: 9869.000 MB/sec [78376.492009] generic_sse: 8706.000 MB/sec [78376.492011] xor: using function: prefetch64-sse (9869.000 MB/sec) [78376.687748] Btrfs loaded [78376.967702] EXT4-fs (sda2): unable to read superblock [78376.981216] EXT4-fs (sda2): unable to read superblock [78376.990946] EXT4-fs (sda2): unable to read superblock [78377.017793] FAT-fs (sda2): bogus logical sector size 65535 [78377.017798] FAT-fs (sda2): Can't find a valid FAT filesystem [78377.051484] XFS (sda2): Invalid superblock magic number [78377.055148] FAT-fs (sda2): bogus logical sector size 65535 [78377.055151] FAT-fs (sda2): Can't find a valid FAT filesystem [78377.066650] MINIX-fs: unable to read superblock [78377.100173] attempt to access beyond end of device [78377.100177] sda2: rw=16, want=3, limit=2 [78377.100180] hfsplus: unable to find HFS+ superblock [78377.105542] qnx4: no qnx4 filesystem (no root dir). [78377.106928] ufs: You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [78377.112711] hfs: can't find a HFS filesystem on dev sda2 [78408.249554] EXT4-fs (sda2): unable to read superblock [78408.250969] EXT4-fs (sda2): unable to read superblock [78408.252392] EXT4-fs (sda2): unable to read superblock [78408.253880] FAT-fs (sda2): bogus logical sector size 65535 [78408.253890] FAT-fs (sda2): Can't find a valid FAT filesystem [78408.258843] XFS (sda2): Invalid superblock magic number [78408.262072] FAT-fs (sda2): bogus logical sector size 65535 [78408.262077] FAT-fs (sda2): Can't find a valid FAT filesystem [78408.266570] MINIX-fs: unable to read superblock [78408.267956] attempt to access beyond end of device [78408.267959] sda2: rw=16, want=3, limit=2 [78408.267962] hfsplus: unable to find HFS+ superblock [78408.269498] qnx4: no qnx4 filesystem (no root dir). [78408.270948] ufs: You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [78408.286082] hfs: can't find a HFS filesystem on dev sda2