[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #44-Ubuntu SMP Fri Sep 17 20:05:27 UTC 2010 (Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7) [ 0.000000] Command line: root=UUID=3332486a-878e-49e4-83d1-6bbca6eb8194 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 base 0BFF00000 mask FFFF00000 write-through [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] modified: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfee0000 page 4k [ 0.000000] kernel direct mapping tables up to bfee0000 @ 8000-d000 [ 0.000000] RAMDISK: 377fa000 - 37feff5c [ 0.000000] ACPI: RSDP 00000000000f6980 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000bfee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000bfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000bfee3180 03955 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000bfee0000 00040 [ 0.000000] ACPI: HPET 00000000bfee6c40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000bfee6cc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000bfee6b40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000bfee6d40 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.000000] ACPI: SSDT 00000000bfee72f0 00275 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000bfee0000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000bfee0000 [ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 0000000000027fdf] pages 18 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bfee0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2ca64] TEXT DATA BSS ==> [0001000000 - 0001a2ca64] [ 0.000000] #3 [00377fa000 - 0037feff5c] RAMDISK ==> [00377fa000 - 0037feff5c] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a2d000 - 0001a2d0f6] BRK ==> [0001a2d000 - 0001a2d0f6] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f4fc0] f4fc0 [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002000000-ffff8800049fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfee0 [ 0.000000] On node 0 totalpages: 786042 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10693 pages used for memmap [ 0.000000] DMA32 zone: 771355 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775191 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=3332486a-878e-49e4-83d1-6bbca6eb8194 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3081876k/3144576k available (5419k kernel code, 408k absent, 62292k reserved, 2974k data, 872k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 31457280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2399.603 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.20 BogoMIPS (lpj=23996030) [ 0.010035] Security Framework initialized [ 0.010055] AppArmor: AppArmor initialized [ 0.010406] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.014189] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.016047] Mount-cache hash table entries: 256 [ 0.016229] Initializing cgroup subsys ns [ 0.016235] Initializing cgroup subsys cpuacct [ 0.016239] Initializing cgroup subsys memory [ 0.016248] Initializing cgroup subsys devices [ 0.016250] Initializing cgroup subsys freezer [ 0.016252] Initializing cgroup subsys net_cls [ 0.016274] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.016277] CPU: L2 cache: 4096K [ 0.016280] CPU 0/0x0 -> Node 0 [ 0.016282] CPU: Physical Processor ID: 0 [ 0.016283] CPU: Processor Core ID: 0 [ 0.016286] mce: CPU supports 6 MCE banks [ 0.016294] CPU0: Thermal monitoring enabled (TM2) [ 0.016298] using mwait in idle threads. [ 0.016299] Performance Events: Core2 events, Intel PMU driver. [ 0.016305] ... version: 2 [ 0.016307] ... bit width: 40 [ 0.016308] ... generic registers: 2 [ 0.016309] ... value mask: 000000ffffffffff [ 0.016311] ... max period: 000000007fffffff [ 0.016312] ... fixed-purpose events: 3 [ 0.016313] ... event mask: 0000000700000003 [ 0.018573] ACPI: Core revision 20090903 [ 0.026162] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.026171] ftrace: allocating 22538 entries in 89 pages [ 0.030050] Setting APIC routing to flat [ 0.030354] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.135321] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.140000] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 4096K [ 0.020000] CPU 1/0x2 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 2 [ 0.020000] CPU1: Thermal monitoring enabled (TM2) [ 0.290052] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.290059] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.300073] Booting processor 2 APIC 0x3 ip 0x6000 [ 0.020000] Initializing CPU#2 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 4096K [ 0.020000] CPU 2/0x3 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 3 [ 0.020000] CPU2: Thermal monitoring enabled (TM2) [ 0.460122] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.460128] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.470074] Booting processor 3 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#3 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 4096K [ 0.020000] CPU 3/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] CPU3: Thermal monitoring enabled (TM2) [ 0.630095] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.630101] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.640017] Brought up 4 CPUs [ 0.640020] Total of 4 processors activated (19199.30 BogoMIPS). [ 0.641616] CPU0 attaching sched-domain: [ 0.641619] domain 0: span 0,3 level MC [ 0.641621] groups: 0 3 [ 0.641625] domain 1: span 0-3 level CPU [ 0.641627] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048) [ 0.641634] CPU1 attaching sched-domain: [ 0.641636] domain 0: span 1-2 level MC [ 0.641638] groups: 1 2 [ 0.641641] domain 1: span 0-3 level CPU [ 0.641643] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048) [ 0.641649] CPU2 attaching sched-domain: [ 0.641650] domain 0: span 1-2 level MC [ 0.641652] groups: 2 1 [ 0.641655] domain 1: span 0-3 level CPU [ 0.641657] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048) [ 0.641662] CPU3 attaching sched-domain: [ 0.641664] domain 0: span 0,3 level MC [ 0.641666] groups: 3 0 [ 0.641669] domain 1: span 0-3 level CPU [ 0.641671] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048) [ 0.641821] devtmpfs: initialized [ 0.641821] regulator: core version 0.5 [ 0.641821] Time: 8:26:10 Date: 10/17/10 [ 0.641821] NET: Registered protocol family 16 [ 0.641821] Trying to unpack rootfs image as initramfs... [ 0.641821] ACPI: bus type pci registered [ 0.641821] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.641821] PCI: MCFG area at f0000000 reserved in E820 [ 0.641821] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.641821] PCI: Using configuration type 1 for base access [ 0.641821] bio: create slab at 0 [ 0.641821] ACPI: EC: Look up EC in DSDT [ 0.644851] ACPI: Interpreter enabled [ 0.644857] ACPI: (supports S0 S3 S4 S5) [ 0.644879] ACPI: Using IOAPIC for interrupt routing [ 0.653064] ACPI: No dock devices found. [ 0.653159] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.653256] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.653259] pci 0000:00:01.0: PME# disabled [ 0.653316] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8000000-0xf8003fff] [ 0.653353] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.653357] pci 0000:00:1b.0: PME# disabled [ 0.653412] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.653415] pci 0000:00:1c.0: PME# disabled [ 0.653475] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.653479] pci 0000:00:1c.3: PME# disabled [ 0.653521] pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f] [ 0.653564] pci 0000:00:1d.1: reg 20 io port: [0xe100-0xe11f] [ 0.653610] pci 0000:00:1d.2: reg 20 io port: [0xe200-0xe21f] [ 0.653652] pci 0000:00:1d.3: reg 20 io port: [0xe300-0xe31f] [ 0.653696] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8004000-0xf80043ff] [ 0.653846] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.653849] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.653853] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.653856] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.653901] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.653906] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.653911] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.653916] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.653921] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] [ 0.653941] pci 0000:00:1f.2: PME# supported from D3hot [ 0.653944] pci 0000:00:1f.2: PME# disabled [ 0.653985] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.654032] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.654042] pci 0000:01:00.0: reg 18 64bit mmio: [0xf5000000-0xf500ffff] [ 0.654047] pci 0000:01:00.0: reg 20 io port: [0xc000-0xc0ff] [ 0.654055] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.654073] pci 0000:01:00.0: supports D1 D2 [ 0.654103] pci 0000:01:00.1: reg 10 64bit mmio: [0xf5010000-0xf5013fff] [ 0.654135] pci 0000:01:00.1: supports D1 D2 [ 0.654175] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.654178] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff] [ 0.654182] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.654216] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff] [ 0.654274] pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff] [ 0.654296] pci 0000:03:00.0: reg 18 64bit mmio: [0xf7000000-0xf7000fff] [ 0.654317] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.654364] pci 0000:03:00.0: supports D1 D2 [ 0.654365] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.654370] pci 0000:03:00.0: PME# disabled [ 0.654418] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.654421] pci 0000:00:1c.3: bridge 32bit mmio: [0xf6000000-0xf7ffffff] [ 0.654470] pci 0000:00:1e.0: transparent bridge [ 0.654474] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff] [ 0.654495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.654588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.654636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.654682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.663661] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.663743] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.663821] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.663899] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.663984] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.664063] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.664141] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.664221] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.664318] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.664321] vgaarb: loaded [ 0.664427] SCSI subsystem initialized [ 0.664469] libata version 3.00 loaded. [ 0.664469] usbcore: registered new interface driver usbfs [ 0.664469] usbcore: registered new interface driver hub [ 0.664469] usbcore: registered new device driver usb [ 0.664469] ACPI: WMI: Mapper loaded [ 0.664469] PCI: Using ACPI for IRQ routing [ 0.664469] NetLabel: Initializing [ 0.664469] NetLabel: domain hash size = 128 [ 0.664469] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.664469] NetLabel: unlabeled traffic allowed by default [ 0.664469] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.664469] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.680013] Switching to clocksource tsc [ 0.681849] AppArmor: AppArmor Filesystem Enabled [ 0.681858] pnp: PnP ACPI init [ 0.681867] ACPI: bus type pnp registered [ 0.684125] pnp: PnP ACPI: found 14 devices [ 0.684127] ACPI: ACPI bus type pnp unregistered [ 0.684136] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.684138] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.684141] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.684143] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.684145] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.684152] system 00:0a: ioport range 0x400-0x4bf could not be reserved [ 0.684157] system 00:0b: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.684162] system 00:0c: iomem range 0xcf600-0xcffff has been reserved [ 0.684164] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.684166] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.684169] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.684171] system 00:0c: iomem range 0xbfee0000-0xbfefffff could not be reserved [ 0.684173] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.684176] system 00:0c: iomem range 0x100000-0xbfedffff could not be reserved [ 0.684178] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.684181] system 00:0c: iomem range 0xfed13000-0xfed1dfff has been reserved [ 0.684183] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.684185] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.684188] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.684190] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved [ 0.684192] system 00:0c: iomem range 0xe0000-0xeffff has been reserved [ 0.688887] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.688890] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.688894] pci 0000:00:01.0: MEM window: 0xf4000000-0xf5ffffff [ 0.688897] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.688900] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.688903] pci 0000:00:1c.0: IO window: 0xb000-0xbfff [ 0.688907] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff [ 0.688911] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff [ 0.688916] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 [ 0.688919] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.688923] pci 0000:00:1c.3: MEM window: 0xf6000000-0xf7ffffff [ 0.688926] pci 0000:00:1c.3: PREFETCH window: 0xc0400000-0xc05fffff [ 0.688932] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.688934] pci 0000:00:1e.0: IO window: 0xa000-0xafff [ 0.688938] pci 0000:00:1e.0: MEM window: disabled [ 0.688941] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.688951] alloc irq_desc for 16 on node -1 [ 0.688953] alloc kstat_irqs on node -1 [ 0.688957] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.688960] pci 0000:00:01.0: setting latency timer to 64 [ 0.688967] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.688971] pci 0000:00:1c.0: setting latency timer to 64 [ 0.688977] alloc irq_desc for 19 on node -1 [ 0.688978] alloc kstat_irqs on node -1 [ 0.688981] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.688985] pci 0000:00:1c.3: setting latency timer to 64 [ 0.688990] pci 0000:00:1e.0: setting latency timer to 64 [ 0.688994] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.688996] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.688998] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.689000] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf5ffffff] [ 0.689002] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.689004] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 0.689006] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc01fffff] [ 0.689008] pci_bus 0000:02: resource 2 pref mem [0xc0200000-0xc03fffff] [ 0.689010] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.689012] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xf7ffffff] [ 0.689014] pci_bus 0000:03: resource 2 pref mem [0xc0400000-0xc05fffff] [ 0.689016] pci_bus 0000:04: resource 0 io: [0xa000-0xafff] [ 0.689018] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.689020] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.689050] NET: Registered protocol family 2 [ 0.689201] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.690325] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.696387] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.697351] TCP: Hash tables configured (established 524288 bind 65536) [ 0.697354] TCP reno registered [ 0.697512] NET: Registered protocol family 1 [ 0.697617] pci 0000:01:00.0: Boot video device [ 0.697936] Scanning for low memory corruption every 60 seconds [ 0.698097] audit: initializing netlink socket (disabled) [ 0.698107] type=2000 audit(1287303969.689:1): initialized [ 0.706641] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.707944] VFS: Disk quotas dquot_6.5.2 [ 0.707994] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.708552] fuse init (API version 7.13) [ 0.708632] msgmni has been set to 6019 [ 0.708910] alg: No test for stdrng (krng) [ 0.708981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.708984] io scheduler noop registered [ 0.708986] io scheduler anticipatory registered [ 0.708987] io scheduler deadline registered [ 0.709015] io scheduler cfq registered (default) [ 0.709126] alloc irq_desc for 24 on node -1 [ 0.709128] alloc kstat_irqs on node -1 [ 0.709136] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.709141] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.709229] alloc irq_desc for 25 on node -1 [ 0.709231] alloc kstat_irqs on node -1 [ 0.709237] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.709243] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.709341] alloc irq_desc for 26 on node -1 [ 0.709342] alloc kstat_irqs on node -1 [ 0.709348] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X [ 0.709355] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.709429] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.709495] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.709588] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.709591] ACPI: Power Button [PWRB] [ 0.709635] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.709637] ACPI: Power Button [PWRF] [ 0.709895] processor LNXCPU:00: registered as cooling_device0 [ 0.710063] ACPI: SSDT 00000000bfee7140 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.710268] processor LNXCPU:01: registered as cooling_device1 [ 0.710506] ACPI: SSDT 00000000bfee71d0 00087 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.710736] processor LNXCPU:02: registered as cooling_device2 [ 0.710889] ACPI: SSDT 00000000bfee7260 00087 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.711074] processor LNXCPU:03: registered as cooling_device3 [ 0.713756] Linux agpgart interface v0.103 [ 0.713784] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.713879] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.714145] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.715079] brd: module loaded [ 0.715472] loop: module loaded [ 0.715548] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.715618] ata_piix 0000:00:1f.2: version 2.13 [ 0.715637] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.715641] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.715679] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.715750] scsi0 : ata_piix [ 0.715805] scsi1 : ata_piix [ 0.716446] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.716448] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.716737] Fixed MDIO Bus: probed [ 0.716770] PPP generic driver version 2.4.2 [ 0.716798] tun: Universal TUN/TAP device driver, 1.6 [ 0.716800] tun: (C) 1999-2004 Max Krasnyansky [ 0.716860] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.716875] alloc irq_desc for 23 on node -1 [ 0.716877] alloc kstat_irqs on node -1 [ 0.716882] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.716891] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.716894] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.716932] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.716956] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.720849] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.720861] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8004000 [ 0.739946] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.740037] usb usb1: configuration #1 chosen from 1 choice [ 0.740060] hub 1-0:1.0: USB hub found [ 0.740066] hub 1-0:1.0: 8 ports detected [ 0.740119] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.740129] uhci_hcd: USB Universal Host Controller Interface driver [ 0.740151] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.740160] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.740163] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.740188] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.740211] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000 [ 0.740285] usb usb2: configuration #1 chosen from 1 choice [ 0.740308] hub 2-0:1.0: USB hub found [ 0.740313] hub 2-0:1.0: 2 ports detected [ 0.740351] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.740356] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.740359] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.740386] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.740416] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100 [ 0.740489] usb usb3: configuration #1 chosen from 1 choice [ 0.740509] hub 3-0:1.0: USB hub found [ 0.740514] hub 3-0:1.0: 2 ports detected [ 0.740548] alloc irq_desc for 18 on node -1 [ 0.740549] alloc kstat_irqs on node -1 [ 0.740553] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.740558] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.740561] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.740589] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.740618] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200 [ 0.740687] usb usb4: configuration #1 chosen from 1 choice [ 0.740709] hub 4-0:1.0: USB hub found [ 0.740714] hub 4-0:1.0: 2 ports detected [ 0.740749] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.740754] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.740756] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.740795] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.740823] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300 [ 0.740899] usb usb5: configuration #1 chosen from 1 choice [ 0.740922] hub 5-0:1.0: USB hub found [ 0.740926] hub 5-0:1.0: 2 ports detected [ 0.740997] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 0.740999] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 0.741352] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.741358] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.741473] mice: PS/2 mouse device common for all mice [ 0.741566] rtc_cmos 00:04: RTC can wake from S4 [ 0.741608] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.741630] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.741726] device-mapper: uevent: version 1.0.3 [ 0.741844] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.741977] device-mapper: multipath: version 1.1.0 loaded [ 0.741979] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.742266] cpuidle: using governor ladder [ 0.742268] cpuidle: using governor menu [ 0.742548] TCP cubic registered [ 0.742676] NET: Registered protocol family 10 [ 0.743071] lo: Disabled Privacy Extensions [ 0.743302] NET: Registered protocol family 17 [ 0.747395] PM: Resume from disk failed. [ 0.747410] registered taskstats version 1 [ 0.747671] Magic number: 14:522:422 [ 0.747755] rtc_cmos 00:04: setting system clock to 2010-10-17 08:26:10 UTC (1287303970) [ 0.747758] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.747759] EDD information not available. [ 0.812767] Freeing initrd memory: 8151k freed [ 0.910608] ata2.00: HPA unlocked: 976771055 -> 976773168, native 976773168 [ 0.910614] ata2.00: ATA-8: WDC WD5000AAJS-00A8B0, 01.03B01, max UDMA/133 [ 0.910617] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.930439] ata1.00: HPA unlocked: 976771055 -> 976773168, native 976773168 [ 0.930444] ata1.00: ATA-8: WDC WD5000AAJS-00A8B0, 01.03B01, max UDMA/133 [ 0.930447] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.930468] ata1.01: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100 [ 0.950880] ata2.00: configured for UDMA/133 [ 0.971136] ata1.00: configured for UDMA/133 [ 1.010551] ata1.01: configured for UDMA/100 [ 1.011128] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAJS-0 01.0 PQ: 0 ANSI: 5 [ 1.011276] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.011323] sd 0:0:0:0: [sda] Write Protect is off [ 1.011325] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.011328] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.011346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.012017] scsi 0:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5 [ 1.012077] sda: sda1 sda2 < sda5 > [ 1.057452] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.057456] Uniform CD-ROM driver Revision: 3.20 [ 1.057543] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.057547] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.057595] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.057740] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAJS-0 01.0 PQ: 0 ANSI: 5 [ 1.057854] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.057860] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 1.057900] sd 1:0:0:0: [sdb] Write Protect is off [ 1.057903] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.057923] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.058033] sdb: [ 1.061331] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.068157] sdb1 [ 1.068359] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.068392] Freeing unused kernel memory: 872k freed [ 1.068560] Write protecting the kernel read-only data: 7692k [ 1.082429] udev: starting version 151 [ 1.104121] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.104154] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.104209] r8169 0000:03:00.0: setting latency timer to 64 [ 1.104278] alloc irq_desc for 27 on node -1 [ 1.104281] alloc kstat_irqs on node -1 [ 1.104299] r8169 0000:03:00.0: irq 27 for MSI/MSI-X [ 1.104846] eth0: RTL8168b/8111b at 0xffffc9000063e000, 00:1d:7d:a4:20:fc, XID 18000000 IRQ 27 [ 1.255750] usb 1-3: configuration #1 chosen from 1 choice [ 1.261286] Initializing USB Mass Storage driver... [ 1.261436] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.261536] usb-storage: device found at 2 [ 1.261538] usb-storage: waiting for device to settle before scanning [ 1.261553] usbcore: registered new interface driver usb-storage [ 1.261556] USB Mass Storage support registered. [ 1.295719] kjournald starting. Commit interval 5 seconds [ 1.295727] EXT3-fs: mounted filesystem with ordered data mode. [ 1.440039] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 1.723312] usb 1-8: configuration #1 chosen from 1 choice [ 2.000056] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 2.207995] usb 4-2: configuration #1 chosen from 1 choice [ 6.269627] usb-storage: device scan complete [ 6.273741] scsi 2:0:0:0: Direct-Access Generic Flash HS-CF 3.95 PQ: 0 ANSI: 0 [ 6.277737] scsi 2:0:0:1: Direct-Access Generic Flash HS-MS 3.95 PQ: 0 ANSI: 0 [ 6.281360] scsi 2:0:0:2: Direct-Access Generic Flash HS-SM 3.95 PQ: 0 ANSI: 0 [ 6.284735] scsi 2:0:0:3: Direct-Access Generic Flash HS-SD/MMC 3.95 PQ: 0 ANSI: 0 [ 6.285236] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 6.285369] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 6.285509] sd 2:0:0:2: Attached scsi generic sg5 type 0 [ 6.285638] sd 2:0:0:3: Attached scsi generic sg6 type 0 [ 6.303224] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 6.356486] sd 2:0:0:1: [sdd] Attached SCSI removable disk [ 6.361232] sd 2:0:0:2: [sde] Attached SCSI removable disk [ 6.365483] sd 2:0:0:3: [sdf] Attached SCSI removable disk [ 16.073669] udev: starting version 151 [ 16.092637] lp: driver loaded but no devices found [ 16.109681] Adding 9044552k swap on /dev/sda5. Priority:-1 extents:1 across:9044552k [ 16.132550] vga16fb: initializing [ 16.132555] vga16fb: mapped to 0xffff8800000a0000 [ 16.132654] fb0: VGA16 VGA frame buffer device [ 16.160325] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 16.160330] Disabling lock debugging due to kernel taint [ 16.210476] type=1505 audit(1287303985.953:2): operation="profile_load" pid=585 name="/sbin/dhclient3" [ 16.211213] type=1505 audit(1287303985.953:3): operation="profile_load" pid=585 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.211518] type=1505 audit(1287303985.963:4): operation="profile_load" pid=585 name="/usr/lib/connman/scripts/dhclient-script" [ 16.217221] intel_rng: FWH not detected [ 16.217788] type=1505 audit(1287303985.963:5): operation="profile_load" pid=616 name="/usr/sbin/ntpd" [ 16.227053] [fglrx] Maximum main memory to use for locked dma buffers: 2872 MBytes. [ 16.227173] [fglrx] vendor: 1002 device: 9505 count: 1 [ 16.227472] [fglrx] ioport: bar 4, base 0xc000, size: 0x100 [ 16.227487] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.227492] pci 0000:01:00.0: setting latency timer to 64 [ 16.227797] [fglrx] Kernel PAT support is enabled [ 16.227820] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors [ 16.235412] parport_pc 00:08: reported by Plug and Play ACPI [ 16.235466] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 16.251685] usbcore: registered new interface driver hiddev [ 16.252325] cfg80211: Calling CRDA to update world regulatory domain [ 16.261185] ppdev: user-space parallel port driver [ 16.274492] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input3 [ 16.274591] generic-usb 0003:046E:52C0.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.2-2/input0 [ 16.312709] lp0: using parport0 (interrupt-driven). [ 16.331953] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.331976] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.351306] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input4 [ 16.351429] generic-usb 0003:046E:52C0.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.2-2/input1 [ 16.351454] usbcore: registered new interface driver usbhid [ 16.351456] usbhid: v2.6:USB HID core driver [ 16.383637] Console: switching to colour frame buffer device 80x30 [ 16.392710] cfg80211: World regulatory domain updated: [ 16.392714] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 16.392716] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.392719] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.392721] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.392723] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.392725] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.477691] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 16.495938] alloc irq_desc for 17 on node -1 [ 16.495942] alloc kstat_irqs on node -1 [ 16.495949] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 16.495987] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 16.558567] EXT3 FS on sda1, internal journal [ 16.562841] phy0: Selected rate control algorithm 'minstrel' [ 16.563423] Registered led device: rt73usb-phy0::radio [ 16.563439] Registered led device: rt73usb-phy0::assoc [ 16.563458] Registered led device: rt73usb-phy0::quality [ 16.563968] usbcore: registered new interface driver rt73usb [ 16.894967] type=1505 audit(1287303986.642:6): operation="profile_load" pid=907 name="/usr/share/gdm/guest-session/Xsession" [ 16.896406] type=1505 audit(1287303986.642:7): operation="profile_replace" pid=908 name="/sbin/dhclient3" [ 16.896987] type=1505 audit(1287303986.642:8): operation="profile_replace" pid=908 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.897299] type=1505 audit(1287303986.642:9): operation="profile_replace" pid=908 name="/usr/lib/connman/scripts/dhclient-script" [ 16.899705] type=1505 audit(1287303986.642:10): operation="profile_load" pid=909 name="/usr/bin/evince" [ 16.907037] type=1505 audit(1287303986.652:11): operation="profile_load" pid=909 name="/usr/bin/evince-previewer" [ 16.951645] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 [ 17.150460] r8169: eth0: link down [ 17.150918] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.152483] rt73usb 1-8:1.0: firmware: requesting rt73.bin [ 17.309332] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.574907] alloc irq_desc for 28 on node -1 [ 17.574910] alloc kstat_irqs on node -1 [ 17.574920] fglrx_pci 0000:01:00.0: irq 28 for MSI/MSI-X [ 17.575458] [fglrx] Firegl kernel thread PID: 1204 [ 17.575666] [fglrx] IRQ 28 Enabled [ 18.482970] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 18.674410] [fglrx] Gart USWC size:942 M. [ 18.674414] [fglrx] Gart cacheable size:373 M. [ 18.674418] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 18.674421] [fglrx] Reserved FB block: Unshared offset:fd0b000, size:2f5000 [ 18.674423] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000 [ 22.607150] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 74.551164] wlan0: deauthenticating from 00:1b:9e:ef:11:fa by local choice (reason=3) [ 74.552642] wlan0: direct probe to AP 00:1b:9e:ef:11:fa (try 1) [ 74.555411] wlan0: direct probe responded [ 74.555416] wlan0: authenticate with AP 00:1b:9e:ef:11:fa (try 1) [ 74.557021] wlan0: authenticated [ 74.557039] wlan0: associate with AP 00:1b:9e:ef:11:fa (try 1) [ 74.559648] wlan0: RX AssocResp from 00:1b:9e:ef:11:fa (capab=0x411 status=0 aid=1) [ 74.559651] wlan0: associated [ 74.565106] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 75.542220] Intel AES-NI instructions are not detected. [ 75.593990] padlock: VIA PadLock not detected. [ 84.960007] wlan0: no IPv6 routers present [ 90.505387] process `skype' is using obsolete setsockopt SO_BSDCOMPAT