[ 0.000000] Linux version 4.18.0-16-generic (buildd@lcy01-amd64-022) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #17-Ubuntu SMP Fri Feb 8 00:06:57 UTC 2019 (Ubuntu 4.18.0-16.17-generic 4.18.20) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=0f78fdba-86ac-4bc4-8b44-f1f96e840337 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x205/0x2a0 with crng_init=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be197fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000be198000-0x00000000be1d8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be1d9000-0x00000000be1e8fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000be1e9000-0x00000000be5dafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be5db000-0x00000000bedc4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bedc5000-0x00000000bedc5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bedc6000-0x00000000befcbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000befcc000-0x00000000bf44bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf44c000-0x00000000bf7dcfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7dd000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970A-DS3P, BIOS FD 02/26/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] last_pfn = 0x43f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000043f000000 aka 17392M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 3064M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [(____ptrval____)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x86360000, 0x86360fff] PGTABLE [ 0.000000] BRK [0x86361000, 0x86361fff] PGTABLE [ 0.000000] BRK [0x86362000, 0x86362fff] PGTABLE [ 0.000000] BRK [0x86363000, 0x86363fff] PGTABLE [ 0.000000] BRK [0x86364000, 0x86364fff] PGTABLE [ 0.000000] BRK [0x86365000, 0x86365fff] PGTABLE [ 0.000000] BRK [0x86366000, 0x86366fff] PGTABLE [ 0.000000] BRK [0x86367000, 0x86367fff] PGTABLE [ 0.000000] BRK [0x86368000, 0x86368fff] PGTABLE [ 0.000000] BRK [0x86369000, 0x86369fff] PGTABLE [ 0.000000] BRK [0x8636a000, 0x8636afff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3344b000-0x35a1cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BE1E2068 000054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BE1E7418 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180531/tbfadt-624) [ 0.000000] ACPI: DSDT 0x00000000BE1E2150 0052C7 (v02 ALASKA A M I 00000088 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BE5D5F80 000040 [ 0.000000] ACPI: APIC 0x00000000BE1E7510 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BE1E75B0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000BE1E75F8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000BE1E7638 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 0x00000000BE1E7670 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x43efd3000-0x43effdfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000043effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000be197fff] [ 0.000000] node 0: [mem 0x00000000bedc5000-0x00000000bedc5fff] [ 0.000000] node 0: [mem 0x00000000befcc000-0x00000000bf44bfff] [ 0.000000] node 0: [mem 0x00000000bf7dd000-0x00000000bf7fffff] [ 0.000000] node 0: [mem 0x0000000100001000-0x000000043effffff] [ 0.000000] Reserved but unavailable: 6696 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff] [ 0.000000] On node 0 totalpages: 4183512 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12121 pages used for memmap [ 0.000000] DMA32 zone: 775740 pages, LIFO batch:31 [ 0.000000] Normal zone: 53184 pages used for memmap [ 0.000000] Normal zone: 3403775 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe198000-0xbe1d8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe1d9000-0xbe1e8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe1e9000-0xbe5dafff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe5db000-0xbedc4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbedc6000-0xbefcbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf44c000-0xbf7dcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] [mem 0xbf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4118122 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=0f78fdba-86ac-4bc4-8b44-f1f96e840337 ro quiet splash vt.handoff=1 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB) [ 0.000000] Memory: 16337348K/16734048K available (12300K kernel code, 2633K rwdata, 4352K rodata, 2456K init, 2336K bss, 396700K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 40831 entries in 160 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 4018.481 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39ec8f5df6e, max_idle_ns: 440795317548 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 8036.96 BogoMIPS (lpj=16073924) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.029104] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029171] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029223] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029430] mce: CPU supports 7 MCE banks [ 0.029436] LVT offset 1 assigned for vector 0xf9 [ 0.029440] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.029440] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.029442] Spectre V2 : Mitigation: Full AMD retpoline [ 0.029443] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.029443] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.029444] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.029529] Freeing SMP alternatives memory: 36K [ 0.036000] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) [ 0.036000] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.036000] ... version: 0 [ 0.036000] ... bit width: 48 [ 0.036000] ... generic registers: 6 [ 0.036000] ... value mask: 0000ffffffffffff [ 0.036000] ... max period: 00007fffffffffff [ 0.036000] ... fixed-purpose events: 0 [ 0.036000] ... event mask: 000000000000003f [ 0.036000] Hierarchical SRCU implementation. [ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.036000] smp: Bringing up secondary CPUs ... [ 0.036000] x86: Booting SMP configuration: [ 0.036000] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.068029] smp: Brought up 1 node, 8 CPUs [ 0.068029] smpboot: Max logical packages: 1 [ 0.068029] smpboot: Total of 8 processors activated (64295.69 BogoMIPS) [ 0.072599] devtmpfs: initialized [ 0.072599] x86/mm: Memory block size: 128MB [ 0.076658] PM: Registering ACPI NVS region [mem 0xbe1e9000-0xbe5dafff] (4136960 bytes) [ 0.076658] PM: Registering ACPI NVS region [mem 0xbedc6000-0xbefcbfff] (2121728 bytes) [ 0.076658] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.076658] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.076658] pinctrl core: initialized pinctrl subsystem [ 0.076658] RTC time: 3:43:14, date: 03/27/19 [ 0.076658] NET: Registered protocol family 16 [ 0.076658] audit: initializing netlink subsys (disabled) [ 0.076658] audit: type=2000 audit(1553658194.076:1): state=initialized audit_enabled=0 res=1 [ 0.076658] cpuidle: using governor ladder [ 0.076658] cpuidle: using governor menu [ 0.076658] ACPI: bus type PCI registered [ 0.076658] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.076658] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.076658] PCI: not using MMCONFIG [ 0.076658] PCI: Using configuration type 1 for base access [ 0.076658] PCI: Using configuration type 1 for extended access [ 0.077497] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.077497] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.077497] ACPI: Added _OSI(Module Device) [ 0.077497] ACPI: Added _OSI(Processor Device) [ 0.077497] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.077497] ACPI: Added _OSI(Processor Aggregator Device) [ 0.077497] ACPI: Added _OSI(Linux-Dell-Video) [ 0.077497] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.084004] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.084004] ACPI: Interpreter enabled [ 0.084004] ACPI: (supports S0 S3 S4 S5) [ 0.084004] ACPI: Using IOAPIC for interrupt routing [ 0.084004] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.084004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.084004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.084004] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.090546] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.090551] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.090555] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.090949] PCI host bridge to bus 0000:00 [ 0.090951] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.090952] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.090953] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.090954] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.090955] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.090957] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.090958] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.090959] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.090968] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.091093] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.091109] pci 0000:00:02.0: enabling Extended Tags [ 0.091128] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.091218] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.091233] pci 0000:00:04.0: enabling Extended Tags [ 0.091251] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.091340] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.091355] pci 0000:00:09.0: enabling Extended Tags [ 0.091373] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.091468] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.091483] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] [ 0.091490] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] [ 0.091496] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] [ 0.091503] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] [ 0.091509] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] [ 0.091516] pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff] [ 0.091625] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.091638] pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff] [ 0.091790] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.091806] pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff] [ 0.091863] pci 0000:00:12.2: supports D1 D2 [ 0.091865] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.091953] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.091966] pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff] [ 0.092090] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.092105] pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff] [ 0.092163] pci 0000:00:13.2: supports D1 D2 [ 0.092164] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.092251] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.092375] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.092388] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] [ 0.092395] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] [ 0.092402] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] [ 0.092408] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] [ 0.092415] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] [ 0.092429] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.092430] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.092431] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.092432] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.092516] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.092533] pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit] [ 0.092582] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.092665] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.092791] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.092928] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.092941] pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff] [ 0.093063] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.093076] pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff] [ 0.093198] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.093213] pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff] [ 0.093271] pci 0000:00:16.2: supports D1 D2 [ 0.093272] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.093359] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.093440] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.093517] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.093595] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.093676] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.093753] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.093868] pci 0000:01:00.0: [10de:1c03] type 00 class 0x030000 [ 0.093886] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.093896] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.093905] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.093911] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.093918] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref] [ 0.093923] pci 0000:01:00.0: enabling Extended Tags [ 0.094025] pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300 [ 0.094039] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff] [ 0.094075] pci 0000:01:00.1: enabling Extended Tags [ 0.094196] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.094199] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.094201] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff] [ 0.094203] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.094235] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.094250] pci 0000:02:00.0: reg 0x10: [mem 0xfe300000-0xfe300fff 64bit] [ 0.094303] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.094347] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.094350] pci 0000:00:04.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.094394] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.094414] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.094432] pci 0000:03:00.0: reg 0x18: [mem 0xfe200000-0xfe200fff 64bit] [ 0.094444] pci 0000:03:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref] [ 0.094508] pci 0000:03:00.0: supports D1 D2 [ 0.094509] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.094595] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.094597] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.094599] pci 0000:00:09.0: bridge window [mem 0xfe200000-0xfe2fffff] [ 0.094601] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.094610] pci_bus 0000:04: extended config space not accessible [ 0.094639] pci 0000:04:07.0: [168c:002d] type 00 class 0x028000 [ 0.094656] pci 0000:04:07.0: reg 0x10: [mem 0xfe100000-0xfe10ffff] [ 0.094800] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.094805] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.094808] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.094810] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.094811] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.094812] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.094814] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.094815] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.094816] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.095111] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.095189] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.095269] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.095364] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 [ 0.095430] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0 [ 0.095480] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0 [ 0.095531] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0 [ 0.095583] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0 [ 0.096007] SCSI subsystem initialized [ 0.096016] libata version 3.00 loaded. [ 0.096022] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.096022] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.096022] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.096022] vgaarb: loaded [ 0.096029] ACPI: bus type USB registered [ 0.096029] usbcore: registered new interface driver usbfs [ 0.096029] usbcore: registered new interface driver hub [ 0.096041] usbcore: registered new device driver usb [ 0.096057] pps_core: LinuxPPS API ver. 1 registered [ 0.096058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.096060] PTP clock support registered [ 0.096083] EDAC MC: Ver: 3.0.0 [ 0.096083] PCI: Using ACPI for IRQ routing [ 0.105346] PCI: pci_cache_line_size set to 64 bytes [ 0.105393] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.105394] e820: reserve RAM buffer [mem 0xbe198000-0xbfffffff] [ 0.105395] e820: reserve RAM buffer [mem 0xbedc6000-0xbfffffff] [ 0.105395] e820: reserve RAM buffer [mem 0xbf44c000-0xbfffffff] [ 0.105396] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.105397] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] [ 0.105483] NetLabel: Initializing [ 0.105484] NetLabel: domain hash size = 128 [ 0.105484] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.105500] NetLabel: unlabeled traffic allowed by default [ 0.105517] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.105517] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.108056] clocksource: Switched to clocksource tsc-early [ 0.120685] VFS: Disk quotas dquot_6.6.0 [ 0.120699] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.120812] AppArmor: AppArmor Filesystem Enabled [ 0.120833] pnp: PnP ACPI init [ 0.120974] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.120978] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.121280] system 00:01: [io 0x040b] has been reserved [ 0.121282] system 00:01: [io 0x04d6] has been reserved [ 0.121283] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.121284] system 00:01: [io 0x0c14] has been reserved [ 0.121286] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 0.121287] system 00:01: [io 0x0c52] has been reserved [ 0.121288] system 00:01: [io 0x0c6c] has been reserved [ 0.121291] system 00:01: [io 0x0c6f] has been reserved [ 0.121292] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.121293] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.121294] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 0.121295] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 0.121297] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 0.121298] system 00:01: [io 0x0800-0x089f] has been reserved [ 0.121299] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.121300] system 00:01: [io 0x0900-0x090f] has been reserved [ 0.121301] system 00:01: [io 0x0910-0x091f] has been reserved [ 0.121303] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 0.121305] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.121306] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.121308] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.121309] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.121310] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.121312] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.121314] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved [ 0.121317] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.121493] system 00:02: [io 0x0220-0x0227] has been reserved [ 0.121494] system 00:02: [io 0x0228-0x0237] has been reserved [ 0.121495] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.121499] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.121541] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.121593] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.121617] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.121675] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.121678] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.121717] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.121834] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.121952] system 00:09: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.121955] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.122072] pnp: PnP ACPI: found 10 devices [ 0.128089] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.128107] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.128109] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.128111] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff] [ 0.128113] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.128116] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.128118] pci 0000:00:04.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.128121] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.128122] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.128124] pci 0000:00:09.0: bridge window [mem 0xfe200000-0xfe2fffff] [ 0.128126] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.128129] pci 0000:00:14.4: PCI bridge to [bus 04] [ 0.128132] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.128139] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.128140] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.128141] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.128142] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.128143] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.128144] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.128146] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window] [ 0.128147] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.128148] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff] [ 0.128149] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.128150] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff] [ 0.128151] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.128152] pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe2fffff] [ 0.128154] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.128155] pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff] [ 0.128156] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window] [ 0.128157] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window] [ 0.128158] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window] [ 0.128159] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window] [ 0.128160] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.128161] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.128162] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window] [ 0.128220] NET: Registered protocol family 2 [ 0.128400] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.128458] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.128699] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.128901] TCP: Hash tables configured (established 131072 bind 65536) [ 0.128953] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.129015] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.129126] NET: Registered protocol family 1 [ 0.129130] NET: Registered protocol family 44 [ 0.219410] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c4 took 88146 usecs [ 0.239407] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x6c4 took 19520 usecs [ 0.327404] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c4 took 85927 usecs [ 0.347405] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x6c4 took 19525 usecs [ 0.435403] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c4 took 85919 usecs [ 0.523403] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c4 took 85930 usecs [ 0.543405] pci 0000:00:16.2: quirk_usb_early_handoff+0x0/0x6c4 took 19526 usecs [ 0.543430] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.543437] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.543590] PCI: CLS 64 bytes, default 64 [ 0.543624] Unpacking initramfs... [ 0.994625] Freeing initrd memory: 38728K [ 0.994960] PCI-DMA: Disabling AGP. [ 0.995030] PCI-DMA: aperture base @ f8000000 size 65536 KB [ 0.995047] PCI-DMA: using GART IOMMU. [ 0.995048] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.998227] amd_uncore: AMD NB counters detected [ 0.998365] LVT offset 0 assigned for vector 0x400 [ 0.998425] perf: AMD IBS detected (0x000000ff) [ 0.998472] Scanning for low memory corruption every 60 seconds [ 0.999090] Initialise system trusted keyrings [ 0.999097] Key type blacklist registered [ 0.999135] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.000444] zbud: loaded [ 1.000858] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.001045] fuse init (API version 7.27) [ 1.001100] pstore: using deflate compression [ 1.002368] Key type asymmetric registered [ 1.002369] Asymmetric key parser 'x509' registered [ 1.002393] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.002434] io scheduler noop registered [ 1.002435] io scheduler deadline registered [ 1.002461] io scheduler cfq registered (default) [ 1.002832] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.002879] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 1.002880] vesafb: scrolling: redraw [ 1.002881] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.002889] vesafb: framebuffer at 0xd1000000, mapped to 0x(____ptrval____), using 1216k, total 1216k [ 1.002974] Console: switching to colour frame buffer device 80x30 [ 1.002983] fb0: VESA VGA frame buffer device [ 1.003070] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.003081] ACPI: Power Button [PWRB] [ 1.003111] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.003117] ACPI: Power Button [PWRF] [ 1.003849] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.005539] Linux agpgart interface v0.103 [ 1.007392] loop: module loaded [ 1.007553] libphy: Fixed MDIO Bus: probed [ 1.007554] tun: Universal TUN/TAP device driver, 1.6 [ 1.007580] PPP generic driver version 2.4.2 [ 1.007611] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.007613] ehci-pci: EHCI PCI platform driver [ 1.007694] QUIRK: Enable AMD PLL fix [ 1.007708] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.007712] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.007715] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.007722] ehci-pci 0000:00:12.2: debug port 1 [ 1.007752] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000 [ 1.023345] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.023388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.023390] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.023391] usb usb1: Product: EHCI Host Controller [ 1.023392] usb usb1: Manufacturer: Linux 4.18.0-16-generic ehci_hcd [ 1.023393] usb usb1: SerialNumber: 0000:00:12.2 [ 1.023489] hub 1-0:1.0: USB hub found [ 1.023494] hub 1-0:1.0: 5 ports detected [ 1.023700] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.023705] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.023707] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.023714] ehci-pci 0000:00:13.2: debug port 1 [ 1.023735] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe407000 [ 1.039347] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.039387] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.039388] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.039389] usb usb2: Product: EHCI Host Controller [ 1.039390] usb usb2: Manufacturer: Linux 4.18.0-16-generic ehci_hcd [ 1.039391] usb usb2: SerialNumber: 0000:00:13.2 [ 1.039475] hub 2-0:1.0: USB hub found [ 1.039481] hub 2-0:1.0: 5 ports detected [ 1.039682] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.039686] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.039690] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.039696] ehci-pci 0000:00:16.2: debug port 1 [ 1.039717] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe404000 [ 1.055348] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.055392] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.055393] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.055394] usb usb3: Product: EHCI Host Controller [ 1.055395] usb usb3: Manufacturer: Linux 4.18.0-16-generic ehci_hcd [ 1.055396] usb usb3: SerialNumber: 0000:00:16.2 [ 1.055480] hub 3-0:1.0: USB hub found [ 1.055485] hub 3-0:1.0: 4 ports detected [ 1.055600] ehci-platform: EHCI generic platform driver [ 1.055608] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.055617] ohci-pci: OHCI PCI platform driver [ 1.055712] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.055716] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.055735] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000 [ 1.096127] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 1.096129] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.096130] usb usb4: Product: OHCI PCI host controller [ 1.096131] usb usb4: Manufacturer: Linux 4.18.0-16-generic ohci_hcd [ 1.096132] usb usb4: SerialNumber: 0000:00:12.0 [ 1.096269] hub 4-0:1.0: USB hub found [ 1.096275] hub 4-0:1.0: 5 ports detected [ 1.096467] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.096471] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.096486] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe408000 [ 1.160122] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 1.160123] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.160124] usb usb5: Product: OHCI PCI host controller [ 1.160125] usb usb5: Manufacturer: Linux 4.18.0-16-generic ohci_hcd [ 1.160126] usb usb5: SerialNumber: 0000:00:13.0 [ 1.160268] hub 5-0:1.0: USB hub found [ 1.160275] hub 5-0:1.0: 5 ports detected [ 1.160484] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.160488] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.160503] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000 [ 1.224118] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 1.224120] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.224121] usb usb6: Product: OHCI PCI host controller [ 1.224122] usb usb6: Manufacturer: Linux 4.18.0-16-generic ohci_hcd [ 1.224122] usb usb6: SerialNumber: 0000:00:14.5 [ 1.224262] hub 6-0:1.0: USB hub found [ 1.224269] hub 6-0:1.0: 2 ports detected [ 1.224428] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.224432] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.224448] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe405000 [ 1.288120] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 1.288122] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.288123] usb usb7: Product: OHCI PCI host controller [ 1.288124] usb usb7: Manufacturer: Linux 4.18.0-16-generic ohci_hcd [ 1.288125] usb usb7: SerialNumber: 0000:00:16.0 [ 1.288269] hub 7-0:1.0: USB hub found [ 1.288276] hub 7-0:1.0: 4 ports detected [ 1.288386] ohci-platform: OHCI generic platform driver [ 1.288394] uhci_hcd: USB Universal Host Controller Interface driver [ 1.288482] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.288486] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 1.288551] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000090 [ 1.288656] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.288657] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.288658] usb usb8: Product: xHCI Host Controller [ 1.288659] usb usb8: Manufacturer: Linux 4.18.0-16-generic xhci-hcd [ 1.288660] usb usb8: SerialNumber: 0000:02:00.0 [ 1.288730] hub 8-0:1.0: USB hub found [ 1.288735] hub 8-0:1.0: 1 port detected [ 1.288797] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.288800] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 1.288802] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 1.288825] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.288842] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 1.288843] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.288844] usb usb9: Product: xHCI Host Controller [ 1.288845] usb usb9: Manufacturer: Linux 4.18.0-16-generic xhci-hcd [ 1.288846] usb usb9: SerialNumber: 0000:02:00.0 [ 1.288924] hub 9-0:1.0: USB hub found [ 1.288934] hub 9-0:1.0: 4 ports detected [ 1.289065] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.289445] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.289448] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.289567] mousedev: PS/2 mouse device common for all mice [ 1.289686] rtc_cmos 00:05: RTC can wake from S4 [ 1.289782] rtc_cmos 00:05: registered as rtc0 [ 1.289795] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.289800] i2c /dev entries driver [ 1.289805] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.289856] device-mapper: uevent: version 1.0.3 [ 1.289907] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.290097] ledtrig-cpu: registered to indicate activity on CPUs [ 1.290408] NET: Registered protocol family 10 [ 1.294815] Segment Routing with IPv6 [ 1.294831] NET: Registered protocol family 17 [ 1.294866] Key type dns_resolver registered [ 1.295247] RAS: Correctable Errors collector initialized. [ 1.295564] microcode: microcode updated early to new patch_level=0x06000852 [ 1.295588] microcode: CPU0: patch_level=0x06000852 [ 1.295594] microcode: CPU1: patch_level=0x06000852 [ 1.295600] microcode: CPU2: patch_level=0x06000852 [ 1.295606] microcode: CPU3: patch_level=0x06000852 [ 1.295609] microcode: CPU4: patch_level=0x06000852 [ 1.295615] microcode: CPU5: patch_level=0x06000852 [ 1.295621] microcode: CPU6: patch_level=0x06000852 [ 1.295627] microcode: CPU7: patch_level=0x06000852 [ 1.295654] microcode: Microcode Update Driver: v2.2. [ 1.295663] sched_clock: Marking stable (1295650717, 0)->(1384010661, -88359944) [ 1.295853] registered taskstats version 1 [ 1.295860] Loading compiled-in X.509 certificates [ 1.298186] Loaded X.509 cert 'Build time autogenerated kernel key: ceadf4a2169e91fa82b127879b63b6598e2fd515' [ 1.298204] zswap: loaded using pool lzo/zbud [ 1.301446] Key type big_key registered [ 1.301449] Key type trusted registered [ 1.302972] Key type encrypted registered [ 1.302975] AppArmor: AppArmor sha1 policy hashing enabled [ 1.302980] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.302984] ima: Allocated hash algorithm: sha1 [ 1.303001] evm: Initialising EVM extended attributes: [ 1.303001] evm: security.selinux [ 1.303002] evm: security.SMACK64 [ 1.303002] evm: security.SMACK64EXEC [ 1.303002] evm: security.SMACK64TRANSMUTE [ 1.303003] evm: security.SMACK64MMAP [ 1.303003] evm: security.apparmor [ 1.303003] evm: security.ima [ 1.303004] evm: security.capability [ 1.303004] evm: HMAC attrs: 0x1 [ 1.303291] Magic number: 11:11:716 [ 1.303392] rtc_cmos 00:05: setting system clock to 2019-03-27 03:43:15 UTC (1553658195) [ 1.303588] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.307262] Freeing unused kernel image memory: 2456K [ 1.310035] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.340185] Write protecting the kernel read-only data: 20480k [ 1.340870] Freeing unused kernel image memory: 2008K [ 1.341276] Freeing unused kernel image memory: 1792K [ 1.350399] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.422943] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.422950] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.423142] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.423153] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.423717] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.424811] ahci 0000:00:11.0: version 3.0 [ 1.424950] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.424952] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.426038] scsi host0: pata_atiixp [ 1.426117] scsi host1: ahci [ 1.426278] scsi host2: pata_atiixp [ 1.426364] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.426365] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.426586] scsi host3: ahci [ 1.426680] scsi host4: ahci [ 1.427552] scsi host5: ahci [ 1.427646] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19 [ 1.427648] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19 [ 1.427650] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19 [ 1.427652] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19 [ 1.433083] r8169 0000:03:00.0 eth0: RTL8168g/8111g, e0:d5:5e:75:9e:17, XID 4c000800, IRQ 29 [ 1.433085] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.442933] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 1.632290] usb 9-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1.653061] usb 9-1: New USB device found, idVendor=0bc2, idProduct=331a, bcdDevice= 9.11 [ 1.653062] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.653063] usb 9-1: Product: Expansion Desk [ 1.653064] usb 9-1: Manufacturer: Seagate [ 1.653065] usb 9-1: SerialNumber: NA8F0Z98 [ 1.656028] usb 7-3: new low-speed USB device number 2 using ohci-pci [ 1.656566] usbcore: registered new interface driver usb-storage [ 1.659696] scsi host6: uas [ 1.659775] usbcore: registered new interface driver uas [ 1.660268] scsi 6:0:0:0: Direct-Access Seagate Expansion Desk 0911 PQ: 0 ANSI: 6 [ 1.661354] sd 6:0:0:0: Attached scsi generic sg0 type 0 [ 1.661862] sd 6:0:0:0: [sda] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 1.661863] sd 6:0:0:0: [sda] 4096-byte physical blocks [ 1.662022] sd 6:0:0:0: [sda] Write Protect is off [ 1.662024] sd 6:0:0:0: [sda] Mode Sense: 53 00 00 08 [ 1.662338] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.707731] sda: sda1 sda2 [ 1.708969] random: fast init done [ 1.709226] sd 6:0:0:0: [sda] Attached SCSI disk [ 1.759092] ata6: SATA link down (SStatus 0 SControl 300) [ 1.780103] usb 8-1: new high-speed USB device number 2 using xhci_hcd [ 1.816100] usb 7-3: device descriptor read/64, error -32 [ 1.819740] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 34 [ 1.904132] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.904346] ata3.00: ATA-11: KINGSTON SA400S37120G, SBFKB1D1, max UDMA/133 [ 1.904347] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.904455] ata3.00: configured for UDMA/133 [ 1.904731] scsi 1:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1D1 PQ: 0 ANSI: 5 [ 1.904813] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.904825] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.904827] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.904900] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.904906] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.904913] sd 1:0:0:0: [sdb] Write Protect is off [ 1.904914] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.904925] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.905441] sdb: sdb1 sdb2 < sdb5 > [ 1.905872] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.908030] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.908955] ata4.00: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133 [ 1.908957] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.910173] ata4.00: configured for UDMA/133 [ 1.910445] scsi 3:0:0:0: Direct-Access ATA ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5 [ 1.910599] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.910601] sd 3:0:0:0: [sdc] 4096-byte physical blocks [ 1.910608] sd 3:0:0:0: [sdc] Write Protect is off [ 1.910609] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.910620] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.910624] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.912023] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.912504] ata5.00: ATA-9: WDC WD30EZRX-00SPEB0, 80.00A80, max UDMA/133 [ 1.912506] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.912986] ata5.00: configured for UDMA/133 [ 1.913201] scsi 4:0:0:0: Direct-Access ATA WDC WD30EZRX-00S 0A80 PQ: 0 ANSI: 5 [ 1.913390] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 1.913423] sd 4:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.913424] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 1.913441] sd 4:0:0:0: [sdd] Write Protect is off [ 1.913443] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.913468] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.929244] usb 8-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 1.929246] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.929247] usb 8-1: Product: USB2.0 Hub [ 1.929883] hub 8-1:1.0: USB hub found [ 1.930034] hub 8-1:1.0: 4 ports detected [ 1.930893] sdc: sdc1 sdc2 [ 1.931131] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.980040] tsc: Refined TSC clocksource calibration: 4018.655 MHz [ 1.980058] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39ed3333bcc, max_idle_ns: 440795360304 ns [ 1.980125] clocksource: Switched to clocksource tsc [ 2.084021] usb 7-3: device descriptor read/64, error -32 [ 2.132106] usb 3-4: new high-speed USB device number 3 using ehci-pci [ 2.224101] usb 8-1.2: new full-speed USB device number 3 using xhci_hcd [ 2.264097] usb 3-4: device descriptor read/64, error -32 [ 2.331116] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 2.337454] usb 8-1.2: New USB device found, idVendor=046d, idProduct=08d7, bcdDevice= 1.00 [ 2.337459] usb 8-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.348104] usb 7-3: new low-speed USB device number 3 using ohci-pci [ 2.508099] usb 7-3: device descriptor read/64, error -32 [ 2.512096] usb 3-4: device descriptor read/64, error -32 [ 2.714620] sdd: sdd1 [ 2.715015] sd 4:0:0:0: [sdd] Attached SCSI disk [ 2.748103] usb 3-4: new high-speed USB device number 4 using ehci-pci [ 2.776102] usb 7-3: device descriptor read/64, error -32 [ 2.880106] usb 3-4: device descriptor read/64, error -32 [ 2.884110] usb usb7-port3: attempt power cycle [ 3.120098] usb 3-4: device descriptor read/64, error -32 [ 3.230047] usb usb3-port4: attempt power cycle [ 3.356099] usb 7-3: new low-speed USB device number 4 using ohci-pci [ 3.672099] usb 3-4: new high-speed USB device number 5 using ehci-pci [ 3.772098] usb 7-3: device not accepting address 4, error -32 [ 3.928099] usb 7-3: new low-speed USB device number 5 using ohci-pci [ 4.088098] usb 3-4: device not accepting address 5, error -32 [ 4.216099] usb 3-4: new high-speed USB device number 6 using ehci-pci [ 4.344097] usb 7-3: device not accepting address 5, error -32 [ 4.344124] usb usb7-port3: unable to enumerate USB device [ 4.632098] usb 3-4: device not accepting address 6, error -32 [ 4.632129] usb usb3-port4: unable to enumerate USB device [ 4.988079] usb 7-3: new low-speed USB device number 6 using ohci-pci [ 5.008362] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 5.148014] usb 7-3: device descriptor read/64, error -32 [ 5.205183] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.224567] systemd[1]: Detected architecture x86-64. [ 5.228065] systemd[1]: Set hostname to . [ 5.430631] systemd[1]: Listening on Journal Socket. [ 5.432536] systemd[1]: Mounting POSIX Message Queue File System... [ 5.432723] systemd[1]: Created slice User and Session Slice. [ 5.432946] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.432967] systemd[1]: Reached target User and Group Name Lookups. [ 5.433137] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.433192] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.436015] usb 7-3: device descriptor read/64, error -32 [ 5.450510] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 5.456961] lp: driver loaded but no devices found [ 5.462300] ppdev: user-space parallel port driver [ 5.585866] systemd-journald[331]: Received request to flush runtime journal from PID 1 [ 5.732022] usb 7-3: new low-speed USB device number 7 using ohci-pci [ 5.776649] ipmi message handler version 39.2 [ 5.781230] ipmi device interface [ 5.784223] cryptd: max_cpu_qlen set to 1000 [ 5.797254] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.801335] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.812531] AVX version of gcm_enc/dec engaged. [ 5.812532] AES CTR mode by8 optimization enabled [ 5.892017] usb 7-3: device descriptor read/64, error -32 [ 5.905990] media: Linux media interface: v0.10 [ 5.938659] videodev: Linux video capture interface: v2.00 [ 5.949045] nvidia: loading out-of-tree module taints kernel. [ 5.949054] nvidia: module license 'NVIDIA' taints kernel. [ 5.949054] Disabling lock debugging due to kernel taint [ 5.958026] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 5.967252] nvidia-nvlink: Nvlink Core is being initialized, major device number 239 [ 5.995564] gspca_main: v2.14.0 registered [ 6.003901] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d7 [ 6.160013] usb 7-3: device descriptor read/64, error -32 [ 6.161003] random: crng init done [ 6.161004] random: 7 urandom warning(s) missed due to ratelimiting [ 6.256724] kvm: Nested Virtualization enabled [ 6.256728] kvm: Nested Paging enabled [ 6.258273] ath: EEPROM regdomain: 0x809c [ 6.258275] ath: EEPROM indicates we should expect a country code [ 6.258276] ath: doing EEPROM country->regdmn map search [ 6.258276] ath: country maps to regdmn code: 0x52 [ 6.258278] ath: Country alpha2 being used: CN [ 6.258278] ath: Regpair used: 0x52 [ 6.259998] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 6.260360] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.116 Sun Jan 27 07:21:36 PST 2019 (using threaded interrupts) [ 6.261003] snd_hda_intel 0000:01:00.1: Disabling MSI [ 6.261010] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 6.262080] MCE: In-kernel MCE decoding enabled. [ 6.268050] usb usb7-port3: attempt power cycle [ 6.269892] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 6.270177] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffbee6c2580000, irq=21 [ 6.277228] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.277229] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.277344] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.116 Sun Jan 27 06:30:32 PST 2019 [ 6.280137] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 6.280140] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 6.290110] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 6.290112] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.290114] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.290116] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.290117] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 6.290118] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.290120] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 6.290122] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 6.290124] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 6.304802] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 6.304899] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 6.304998] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 6.305069] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 6.305215] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 6.413663] ath9k 0000:04:07.0 wlp4s7: renamed from wlan0 [ 6.474509] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 238 [ 6.545518] Adding 15998972k swap on /dev/sdb5. Priority:-2 extents:1 across:15998972k SSFS [ 6.768030] usb 7-3: new low-speed USB device number 8 using ohci-pci [ 6.817047] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 6.981889] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 6.982191] caller os_map_kernel_space.part.9+0xdb/0x120 [nvidia] mapping multiple BARs [ 7.147489] input: gspca_zc3xx as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-1/8-1.2/input/input14 [ 7.147671] usbcore: registered new interface driver gspca_zc3xx [ 7.148756] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 7.148978] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 7.149187] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 7.149316] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 7.178891] usbcore: registered new interface driver snd-usb-audio [ 7.188069] usb 7-3: device not accepting address 8, error -32 [ 7.372098] usb 7-3: new low-speed USB device number 9 using ohci-pci [ 7.558092] audit: type=1400 audit(1553658201.748:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=803 comm="apparmor_parser" [ 7.558216] audit: type=1400 audit(1553658201.748:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=801 comm="apparmor_parser" [ 7.558819] audit: type=1400 audit(1553658201.748:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=800 comm="apparmor_parser" [ 7.560038] audit: type=1400 audit(1553658201.752:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=799 comm="apparmor_parser" [ 7.560040] audit: type=1400 audit(1553658201.752:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=799 comm="apparmor_parser" [ 7.560042] audit: type=1400 audit(1553658201.752:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=799 comm="apparmor_parser" [ 7.564364] audit: type=1400 audit(1553658201.756:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=805 comm="apparmor_parser" [ 7.564392] audit: type=1400 audit(1553658201.756:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=807 comm="apparmor_parser" [ 7.565579] audit: type=1400 audit(1553658201.756:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=804 comm="apparmor_parser" [ 7.565582] audit: type=1400 audit(1553658201.756:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=804 comm="apparmor_parser" [ 7.792024] usb 7-3: device not accepting address 9, error -32 [ 7.792061] usb usb7-port3: unable to enumerate USB device [ 7.984024] usb 7-4: new full-speed USB device number 10 using ohci-pci [ 8.161160] usb 7-4: device descriptor read/64, error -32 [ 8.407419] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 8.472023] usb 7-4: device descriptor read/64, error -32 [ 8.494044] r8169 0000:03:00.0 enp3s0: link down [ 8.494099] r8169 0000:03:00.0 enp3s0: link down [ 8.494142] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 8.497288] IPv6: ADDRCONF(NETDEV_UP): wlp4s7: link is not ready [ 8.519900] IPv6: ADDRCONF(NETDEV_UP): wlp4s7: link is not ready [ 8.615447] IPv6: ADDRCONF(NETDEV_UP): wlp4s7: link is not ready [ 8.740026] usb 7-4: new full-speed USB device number 11 using ohci-pci [ 8.944134] usb 7-4: device descriptor read/64, error -32 [ 9.252106] usb 7-4: device descriptor read/64, error -32 [ 9.360167] usb usb7-port4: attempt power cycle [ 9.860101] usb 7-4: new full-speed USB device number 12 using ohci-pci [ 10.079325] r8169 0000:03:00.0 enp3s0: link up [ 10.079337] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 10.280041] usb 7-4: device not accepting address 12, error -32 [ 10.464110] usb 7-4: new full-speed USB device number 13 using ohci-pci [ 10.884106] usb 7-4: device not accepting address 13, error -32 [ 10.884254] usb usb7-port4: unable to enumerate USB device [ 11.870181] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 11.870650] caller os_map_kernel_space.part.9+0xdb/0x120 [nvidia] mapping multiple BARs [ 42.952227] rfkill: input handler disabled [ 43.440041] ata5.00: exception Emask 0x10 SAct 0x2200000 SErr 0x400000 action 0x6 frozen [ 43.440049] ata5.00: irq_stat 0x08000000, interface fatal error [ 43.440055] ata5: SError: { Handshk } [ 43.440061] ata5.00: failed command: READ FPDMA QUEUED [ 43.440073] ata5.00: cmd 60/08:a8:28:98:05/00:00:41:00:00/40 tag 21 ncq dma 4096 in res 40/00:cc:70:0b:84/00:00:ae:00:00/40 Emask 0x10 (ATA bus error) [ 43.440079] ata5.00: status: { DRDY } [ 43.440084] ata5.00: failed command: WRITE FPDMA QUEUED [ 43.440094] ata5.00: cmd 61/90:c8:70:0b:84/00:00:ae:00:00/40 tag 25 ncq dma 73728 out res 40/00:cc:70:0b:84/00:00:ae:00:00/40 Emask 0x10 (ATA bus error) [ 43.440100] ata5.00: status: { DRDY } [ 43.440106] ata5: hard resetting link [ 43.906868] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 43.908022] ata5.00: configured for UDMA/133 [ 43.908039] ata5: EH complete [ 44.256179] ata5.00: exception Emask 0x10 SAct 0x4 SErr 0x400000 action 0x6 frozen [ 44.256185] ata5.00: irq_stat 0x08000000, interface fatal error [ 44.256190] ata5: SError: { Handshk } [ 44.256194] ata5.00: failed command: WRITE FPDMA QUEUED [ 44.256202] ata5.00: cmd 61/90:10:08:0c:84/00:00:ae:00:00/40 tag 2 ncq dma 73728 out res 40/00:14:08:0c:84/00:00:ae:00:00/40 Emask 0x10 (ATA bus error) [ 44.256246] ata5.00: status: { DRDY } [ 44.256254] ata5: hard resetting link [ 44.723658] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 44.724740] ata5.00: configured for UDMA/133 [ 44.724750] ata5: EH complete [ 57.136200] ata5.00: exception Emask 0x10 SAct 0x20000 SErr 0x400000 action 0x6 frozen [ 57.136209] ata5.00: irq_stat 0x08000000, interface fatal error [ 57.136215] ata5: SError: { Handshk } [ 57.136221] ata5.00: failed command: WRITE FPDMA QUEUED [ 57.136233] ata5.00: cmd 61/48:88:00:12:84/00:00:ae:00:00/40 tag 17 ncq dma 36864 out res 40/00:8c:00:12:84/00:00:ae:00:00/40 Emask 0x10 (ATA bus error) [ 57.136239] ata5.00: status: { DRDY } [ 57.136246] ata5: hard resetting link [ 57.611201] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 57.612389] ata5.00: configured for UDMA/133 [ 57.612404] ata5: EH complete [ 57.710450] ata5: limiting SATA link speed to 3.0 Gbps [ 57.710457] ata5.00: exception Emask 0x10 SAct 0x800 SErr 0x400000 action 0x6 frozen [ 57.710464] ata5.00: irq_stat 0x08000000, interface fatal error [ 57.710470] ata5: SError: { Handshk } [ 57.710476] ata5.00: failed command: WRITE FPDMA QUEUED [ 57.710488] ata5.00: cmd 61/20:58:e0:e8:94/00:00:41:00:00/40 tag 11 ncq dma 16384 out res 40/00:5c:e0:e8:94/00:00:41:00:00/40 Emask 0x10 (ATA bus error) [ 57.710495] ata5.00: status: { DRDY } [ 57.710502] ata5: hard resetting link [ 58.185534] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 58.186735] ata5.00: configured for UDMA/133 [ 58.186748] ata5: EH complete [17558.099716] sd 6:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD IN [17558.099725] sd 6:0:0:0: [sda] tag#5 CDB: Read(16) 88 00 00 00 00 00 ee 2c cd f8 00 00 00 08 00 00 [17558.099799] sd 6:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN [17558.099802] sd 6:0:0:0: [sda] tag#4 CDB: Read(16) 88 00 00 00 00 00 ee 2c cd e8 00 00 00 08 00 00 [17558.123621] scsi host6: uas_eh_device_reset_handler start [17558.252051] usb 9-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [17558.274765] scsi host6: uas_eh_device_reset_handler success