[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-24-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 (Ubuntu 3.2.0-24.39-generic 3.2.16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=b409a566-f0c0-455c-8467-ed79da8062e4 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091400 (usable) [ 0.000000] BIOS-e820: 0000000000091400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] BIOS-e820: 0000000040200000 - 00000000caa29000 (usable) [ 0.000000] BIOS-e820: 00000000caa29000 - 00000000caa6d000 (reserved) [ 0.000000] BIOS-e820: 00000000caa6d000 - 00000000cadb7000 (usable) [ 0.000000] BIOS-e820: 00000000cadb7000 - 00000000cade7000 (reserved) [ 0.000000] BIOS-e820: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cafe7000 - 00000000cafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cafff000 - 00000000cb000000 (usable) [ 0.000000] BIOS-e820: 00000000cb800000 - 00000000cfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 00000000ffc20000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000022e000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. Latitude E6320/087HK7, BIOS A07 09/15/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x22e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back [ 0.000000] 3 base 0C8000000 mask FFC000000 write-back [ 0.000000] 4 base 0CB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FE0000000 write-back [ 0.000000] 7 base 220000000 mask FF0000000 write-back [ 0.000000] 8 base 22E000000 mask FFE000000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 128MB, type WB [ 0.000000] reg 3, base: 3200MB, range: 64MB, type WB [ 0.000000] reg 4, base: 3248MB, range: 16MB, type UC [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB [ 0.000000] reg 6, base: 8GB, range: 512MB, type WB [ 0.000000] reg 7, base: 8704MB, range: 256MB, type WB [ 0.000000] reg 8, base: 8928MB, range: 32MB, type UC [ 0.000000] total RAM covered: 8080M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 128MB, type WB [ 0.000000] reg 3, base: 3200MB, range: 64MB, type WB [ 0.000000] reg 4, base: 3248MB, range: 16MB, type UC [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB [ 0.000000] reg 6, base: 8GB, range: 512MB, type WB [ 0.000000] reg 7, base: 8704MB, range: 256MB, type WB [ 0.000000] reg 8, base: 8928MB, range: 32MB, type UC [ 0.000000] e820 update range: 00000000cb000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f1ae0] f1ae0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000008c000] 8c000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000 [ 0.000000] 0000000000 - 00cb000000 page 2M [ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000022e000000 [ 0.000000] 0100000000 - 022e000000 page 2M [ 0.000000] kernel direct mapping tables up to 22e000000 @ cadad000-cadb7000 [ 0.000000] RAMDISK: 364e8000 - 3726c000 [ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000caffde18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-365) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40, using 32 (20110623/tbfadt-489) [ 0.000000] ACPI: DSDT 00000000caf66018 08461 (v02 INT430 SYSFexxx 00001001 INTL 20090903) [ 0.000000] ACPI: FACS 00000000cafe4e40 00040 [ 0.000000] ACPI: APIC 00000000caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: TCPA 00000000cafe5d18 00032 (v02 00000000 00000000) [ 0.000000] ACPI: SSDT 00000000caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) [ 0.000000] ACPI: MCFG 00000000cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) [ 0.000000] ACPI: BOOT 00000000cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: SSDT 00000000caf7d018 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) [ 0.000000] ACPI: SSDT 00000000caf7c018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) [ 0.000000] ACPI: DMAR 00000000caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: SLIC 00000000caf86c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000022e000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000022e000000 [ 0.000000] NODE_DATA [000000022dffb000 - 000000022dffffff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225600000-ffff88022d5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0022e000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000091 [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x000caa29 [ 0.000000] 0: 0x000caa6d -> 0x000cadb7 [ 0.000000] 0: 0x000cafff -> 0x000cb000 [ 0.000000] 0: 0x00100000 -> 0x0022e000 [ 0.000000] On node 0 totalpages: 2066677 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3900 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 809396 pages, LIFO batch:31 [ 0.000000] Normal zone: 19328 pages used for memmap [ 0.000000] Normal zone: 1217664 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000caa29000 - 00000000caa6d000 [ 0.000000] PM: Registered nosave memory: 00000000cadb7000 - 00000000cade7000 [ 0.000000] PM: Registered nosave memory: 00000000cade7000 - 00000000cafe7000 [ 0.000000] PM: Registered nosave memory: 00000000cafe7000 - 00000000cafff000 [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cb800000 [ 0.000000] PM: Registered nosave memory: 00000000cb800000 - 00000000cfa00000 [ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000 [ 0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f31c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022dc00000 s83072 r8192 d23424 u131072 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2030960 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=b409a566-f0c0-455c-8467-ed79da8062e4 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8038100k/9142272k available (6567k kernel code, 875564k absent, 228608k reserved, 6636k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:808 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2693.821 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.64 BogoMIPS (lpj=10775284) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000026] Security Framework initialized [ 0.000036] AppArmor: AppArmor initialized [ 0.000037] Yama: becoming mindful. [ 0.000677] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002233] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002859] Mount-cache hash table entries: 256 [ 0.002951] Initializing cgroup subsys cpuacct [ 0.002955] Initializing cgroup subsys memory [ 0.002962] Initializing cgroup subsys devices [ 0.002964] Initializing cgroup subsys freezer [ 0.002965] Initializing cgroup subsys blkio [ 0.002969] Initializing cgroup subsys perf_event [ 0.002992] CPU: Physical Processor ID: 0 [ 0.002993] CPU: Processor Core ID: 0 [ 0.002997] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002998] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003001] mce: CPU supports 7 MCE banks [ 0.003011] CPU0: Thermal monitoring enabled (TM1) [ 0.003016] using mwait in idle threads. [ 0.005189] ACPI: Core revision 20110623 [ 0.010134] ftrace: allocating 27050 entries in 107 pages [ 0.018849] DMAR: Host address width 36 [ 0.018852] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.018857] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.018859] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.018863] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.018865] DMAR: RMRR base: 0x000000cadc6000 end: 0x000000cadd5fff [ 0.018867] DMAR: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff [ 0.018937] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.018938] HPET id 0 under DRHD base 0xfed91000 [ 0.018939] HPET id 0 under DRHD base 0xfed91000 [ 0.018940] HPET id 0 under DRHD base 0xfed91000 [ 0.018941] HPET id 0 under DRHD base 0xfed91000 [ 0.018942] HPET id 0 under DRHD base 0xfed91000 [ 0.018943] HPET id 0 under DRHD base 0xfed91000 [ 0.018944] HPET id 0 under DRHD base 0xfed91000 [ 0.018945] HPET id 0 under DRHD base 0xfed91000 [ 0.019105] Enabled IRQ remapping in x2apic mode [ 0.019106] Enabling x2apic [ 0.019107] Enabled x2apic [ 0.019113] Switched APIC routing to cluster x2apic. [ 0.019551] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.059221] CPU0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz stepping 07 [ 0.164960] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.164964] PEBS disabled due to CPU errata. [ 0.164966] ... version: 3 [ 0.164967] ... bit width: 48 [ 0.164968] ... generic registers: 4 [ 0.164969] ... value mask: 0000ffffffffffff [ 0.164970] ... max period: 000000007fffffff [ 0.164971] ... fixed-purpose events: 3 [ 0.164972] ... event mask: 000000070000000f [ 0.165151] NMI watchdog enabled, takes one hw-pmu counter. [ 0.165221] Booting Node 0, Processors #1 [ 0.165223] smpboot cpu 1: start_ip = 8c000 [ 0.273051] NMI watchdog enabled, takes one hw-pmu counter. [ 0.273122] #2 [ 0.273123] smpboot cpu 2: start_ip = 8c000 [ 0.381044] NMI watchdog enabled, takes one hw-pmu counter. [ 0.381118] #3 [ 0.381119] smpboot cpu 3: start_ip = 8c000 [ 0.488942] NMI watchdog enabled, takes one hw-pmu counter. [ 0.488968] Brought up 4 CPUs [ 0.488970] Total of 4 processors activated (21550.82 BogoMIPS). [ 0.492687] devtmpfs: initialized [ 0.493381] EVM: security.selinux [ 0.493382] EVM: security.SMACK64 [ 0.493383] EVM: security.capability [ 0.493406] PM: Registering ACPI NVS region at cade7000 (2097152 bytes) [ 0.493434] Dell Latitude E6320 series board detected. Selecting PCI-method for reboots. [ 0.494047] print_constraints: dummy: [ 0.494076] RTC time: 9:28:51, date: 05/24/12 [ 0.494101] NET: Registered protocol family 16 [ 0.494181] Trying to unpack rootfs image as initramfs... [ 0.494183] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.494185] ACPI: bus type pci registered [ 0.494244] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.494246] PCI: not using MMCONFIG [ 0.494247] PCI: Using configuration type 1 for base access [ 0.494255] dmi type 0xB1 record - unknown flag [ 0.494998] bio: create slab at 0 [ 0.495061] ACPI: Added _OSI(Module Device) [ 0.495062] ACPI: Added _OSI(Processor Device) [ 0.495064] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.495065] ACPI: Added _OSI(Processor Aggregator Device) [ 0.496201] ACPI: EC: Look up EC in DSDT [ 0.499455] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.695394] Freeing initrd memory: 13840k freed [ 0.737133] ACPI: SSDT 00000000cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) [ 0.737430] ACPI: Dynamic OEM Table Load: [ 0.737432] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) [ 0.749012] ACPI: SSDT 00000000cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) [ 0.749328] ACPI: Dynamic OEM Table Load: [ 0.749330] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903) [ 0.760898] ACPI: SSDT 00000000cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) [ 0.761188] ACPI: Dynamic OEM Table Load: [ 0.761190] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903) [ 0.844841] ACPI: Interpreter enabled [ 0.844843] ACPI: (supports S0 S3 S4 S5) [ 0.844861] ACPI: Using IOAPIC for interrupt routing [ 0.844878] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.845190] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 1.565123] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 [ 1.612597] ACPI: No dock devices found. [ 1.612599] HEST: Table not found. [ 1.612602] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.612849] \_SB_.PCI0:_OSC invalid UUID [ 1.612850] _OSC request data:1 8 1f [ 1.612854] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 1.613284] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.613286] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.613287] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.613290] pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xfeafffff] [ 1.613292] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 1.613301] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 1.613335] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300 [ 1.613344] pci 0000:00:02.0: reg 10: [mem 0xe1400000-0xe17fffff 64bit] [ 1.613349] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.613353] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] [ 1.613404] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 1.613427] pci 0000:00:16.0: reg 10: [mem 0xe2eb0000-0xe2eb000f 64bit] [ 1.613502] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.613507] pci 0000:00:16.0: PME# disabled [ 1.613529] pci 0000:00:16.3: [8086:1c3d] type 0 class 0x000700 [ 1.613547] pci 0000:00:16.3: reg 10: [io 0x40e0-0x40e7] [ 1.613557] pci 0000:00:16.3: reg 14: [mem 0xe2e90000-0xe2e90fff] [ 1.613651] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200 [ 1.613669] pci 0000:00:19.0: reg 10: [mem 0xe2e00000-0xe2e1ffff] [ 1.613678] pci 0000:00:19.0: reg 14: [mem 0xe2e80000-0xe2e80fff] [ 1.613686] pci 0000:00:19.0: reg 18: [io 0x4080-0x409f] [ 1.613748] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.613752] pci 0000:00:19.0: PME# disabled [ 1.613774] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 1.613794] pci 0000:00:1a.0: reg 10: [mem 0xe2e70000-0xe2e703ff] [ 1.613882] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.613887] pci 0000:00:1a.0: PME# disabled [ 1.613910] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 1.613926] pci 0000:00:1b.0: reg 10: [mem 0xe2e60000-0xe2e63fff 64bit] [ 1.613992] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.613995] pci 0000:00:1b.0: PME# disabled [ 1.614020] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 1.614145] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.614150] pci 0000:00:1c.0: PME# disabled [ 1.614185] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 1.614312] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.614317] pci 0000:00:1c.1: PME# disabled [ 1.614350] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604 [ 1.614481] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.614486] pci 0000:00:1c.2: PME# disabled [ 1.614520] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 1.614648] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.614653] pci 0000:00:1c.3: PME# disabled [ 1.614688] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 1.614819] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.614824] pci 0000:00:1c.5: PME# disabled [ 1.614858] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 1.614879] pci 0000:00:1d.0: reg 10: [mem 0xe2e50000-0xe2e503ff] [ 1.614966] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.614970] pci 0000:00:1d.0: PME# disabled [ 1.614993] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601 [ 1.615115] pci 0000:00:1f.2: [8086:282a] type 0 class 0x000104 [ 1.615133] pci 0000:00:1f.2: reg 10: [io 0x40d0-0x40d7] [ 1.615141] pci 0000:00:1f.2: reg 14: [io 0x40c0-0x40c3] [ 1.615149] pci 0000:00:1f.2: reg 18: [io 0x40b0-0x40b7] [ 1.615157] pci 0000:00:1f.2: reg 1c: [io 0x40a0-0x40a3] [ 1.615165] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] [ 1.615173] pci 0000:00:1f.2: reg 24: [mem 0xe2e40000-0xe2e407ff] [ 1.615216] pci 0000:00:1f.2: PME# supported from D3hot [ 1.615219] pci 0000:00:1f.2: PME# disabled [ 1.615236] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 1.615251] pci 0000:00:1f.3: reg 10: [mem 0xe2e30000-0xe2e300ff 64bit] [ 1.615271] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f] [ 1.615369] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 1.615614] pci 0000:02:00.0: [8086:0082] type 0 class 0x000280 [ 1.615762] pci 0000:02:00.0: reg 10: [mem 0xe2d00000-0xe2d01fff 64bit] [ 1.616460] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.616513] pci 0000:02:00.0: PME# disabled [ 1.624618] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.624627] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff] [ 1.624705] pci 0000:00:1c.2: PCI bridge to [bus 03-08] [ 1.624710] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 1.624715] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff] [ 1.624724] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref] [ 1.624795] pci 0000:00:1c.3: PCI bridge to [bus 09-09] [ 1.624800] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.624805] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff] [ 1.624813] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref] [ 1.626625] pci 0000:0a:00.0: [1217:8221] type 0 class 0x000805 [ 1.626668] pci 0000:0a:00.0: reg 10: [mem 0xe2c00000-0xe2c001ff] [ 1.626990] pci 0000:0a:00.0: supports D1 D2 [ 1.626991] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.627000] pci 0000:0a:00.0: PME# disabled [ 1.634222] pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] [ 1.634228] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff] [ 1.634269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.634376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.634402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 1.634426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 1.634451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 1.634484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 1.634542] \_SB_.PCI0:_OSC invalid UUID [ 1.634543] _OSC request data:1 1f 1f [ 1.634546] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.634570] \_SB_.PCI0:_OSC invalid UUID [ 1.634571] _OSC request data:1 0 1d [ 1.634574] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 1.634575] ACPI _OSC control for PCIe not granted, disabling ASPM [ 1.637210] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 1.637248] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.637281] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 1.637314] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.637347] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 1.637380] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 1.637414] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 1.637446] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 1.637534] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.637540] vgaarb: loaded [ 1.637541] vgaarb: bridge control possible 0000:00:02.0 [ 1.637612] i2c-core: driver [aat2870] using legacy suspend method [ 1.637613] i2c-core: driver [aat2870] using legacy resume method [ 1.637656] SCSI subsystem initialized [ 1.637695] libata version 3.00 loaded. [ 1.637724] usbcore: registered new interface driver usbfs [ 1.637732] usbcore: registered new interface driver hub [ 1.637749] usbcore: registered new device driver usb [ 1.637810] PCI: Using ACPI for IRQ routing [ 1.639390] PCI: pci_cache_line_size set to 64 bytes [ 1.641228] reserve RAM buffer: 0000000000091400 - 000000000009ffff [ 1.641230] reserve RAM buffer: 00000000caa29000 - 00000000cbffffff [ 1.641233] reserve RAM buffer: 00000000cadb7000 - 00000000cbffffff [ 1.641235] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff [ 1.641236] reserve RAM buffer: 000000022e000000 - 000000022fffffff [ 1.641309] NetLabel: Initializing [ 1.641310] NetLabel: domain hash size = 128 [ 1.641311] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.641319] NetLabel: unlabeled traffic allowed by default [ 1.641359] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.641363] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.643376] Switching to clocksource hpet [ 1.647943] AppArmor: AppArmor Filesystem Enabled [ 1.647964] pnp: PnP ACPI init [ 1.647975] ACPI: bus type pnp registered [ 1.648221] pnp 00:00: [bus 00-3e] [ 1.648223] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.648225] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.648226] pnp 00:00: [io 0x0d00-0xffff window] [ 1.648228] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.648229] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 1.648231] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 1.648232] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 1.648234] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 1.648235] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 1.648236] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 1.648238] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 1.648239] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 1.648241] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 1.648242] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 1.648244] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 1.648245] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 1.648247] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 1.648248] pnp 00:00: [mem 0xcfa00000-0xfeafffff window] [ 1.648250] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 1.648305] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.648315] pnp 00:01: [io 0x0000-0x001f] [ 1.648318] pnp 00:01: [io 0x0081-0x0091] [ 1.648319] pnp 00:01: [io 0x0093-0x009f] [ 1.648320] pnp 00:01: [io 0x00c0-0x00df] [ 1.648322] pnp 00:01: [dma 4] [ 1.648337] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.648343] pnp 00:02: [mem 0xff000000-0xffffffff] [ 1.648358] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 1.648417] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 1.648448] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved [ 1.648450] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 1.648458] pnp 00:04: [io 0x00f0] [ 1.648469] pnp 00:04: [irq 13] [ 1.648483] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.648491] pnp 00:05: [io 0x002e-0x002f] [ 1.648493] pnp 00:05: [io 0x004e-0x004f] [ 1.648494] pnp 00:05: [io 0x0061] [ 1.648495] pnp 00:05: [io 0x0063] [ 1.648496] pnp 00:05: [io 0x0065] [ 1.648497] pnp 00:05: [io 0x0067] [ 1.648498] pnp 00:05: [io 0x0070] [ 1.648499] pnp 00:05: [io 0x0080] [ 1.648501] pnp 00:05: [io 0x0092] [ 1.648502] pnp 00:05: [io 0x00b2-0x00b3] [ 1.648503] pnp 00:05: [io 0x0680-0x069f] [ 1.648504] pnp 00:05: [io 0x1000-0x100f] [ 1.648506] pnp 00:05: [io 0xffff] [ 1.648507] pnp 00:05: [io 0xffff] [ 1.648508] pnp 00:05: [io 0x0400-0x047f] [ 1.648509] pnp 00:05: [io 0x0500-0x057f] [ 1.648510] pnp 00:05: [io 0x164e-0x164f] [ 1.648538] system 00:05: [io 0x0680-0x069f] has been reserved [ 1.648540] system 00:05: [io 0x1000-0x100f] has been reserved [ 1.648542] system 00:05: [io 0xffff] has been reserved [ 1.648544] system 00:05: [io 0xffff] has been reserved [ 1.648545] system 00:05: [io 0x0400-0x047f] has been reserved [ 1.648547] system 00:05: [io 0x0500-0x057f] has been reserved [ 1.648549] system 00:05: [io 0x164e-0x164f] has been reserved [ 1.648551] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.648557] pnp 00:06: [io 0x0070-0x0077] [ 1.648563] pnp 00:06: [irq 8] [ 1.648578] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.648585] pnp 00:07: [io 0x0060] [ 1.648587] pnp 00:07: [io 0x0064] [ 1.648592] pnp 00:07: [irq 1] [ 1.648607] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.649483] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled) [ 1.649495] pnp 00:09: [irq 12] [ 1.649513] pnp 00:09: Plug and Play ACPI device, IDs DLL0492 PNP0f13 (active) [ 1.649622] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 1.649623] pnp 00:0a: [mem 0xfed10000-0xfed17fff] [ 1.649625] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 1.649626] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 1.649627] pnp 00:0a: [mem 0xf8000000-0xfbffffff] [ 1.649629] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 1.649630] pnp 00:0a: [mem 0xfed90000-0xfed93fff] [ 1.649631] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] [ 1.649633] pnp 00:0a: [mem 0xff000000-0xffffffff] [ 1.649634] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 1.649635] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.649637] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.649672] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.649674] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.649676] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.649678] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.649680] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.649682] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.649684] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.649685] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.649687] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 1.649689] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.649692] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.650148] pnp 00:0b: [irq 23] [ 1.650173] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active) [ 1.652745] pnp 00:0c: [mem 0x20000000-0x201fffff] [ 1.652746] pnp 00:0c: [mem 0x40000000-0x401fffff] [ 1.652790] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 1.652792] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved [ 1.652794] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.652801] pnp: PnP ACPI: found 13 devices [ 1.652802] ACPI: ACPI bus type pnp unregistered [ 1.659149] PCI: max bus depth: 1 pci_try_num: 2 [ 1.659208] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 1.659226] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.659232] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff] [ 1.659244] pci 0000:00:1c.2: PCI bridge to [bus 03-08] [ 1.659247] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 1.659254] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff] [ 1.659259] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref] [ 1.659268] pci 0000:00:1c.3: PCI bridge to [bus 09-09] [ 1.659271] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.659278] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff] [ 1.659283] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref] [ 1.659297] pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] [ 1.659304] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff] [ 1.659329] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.659335] pci 0000:00:1c.0: setting latency timer to 64 [ 1.659346] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.659351] pci 0000:00:1c.1: setting latency timer to 64 [ 1.659362] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.659367] pci 0000:00:1c.2: setting latency timer to 64 [ 1.659378] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.659384] pci 0000:00:1c.3: setting latency timer to 64 [ 1.659391] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.659395] pci 0000:00:1c.5: setting latency timer to 64 [ 1.659399] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.659401] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.659403] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.659404] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff] [ 1.659406] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 1.659408] pci_bus 0000:02: resource 1 [mem 0xe2d00000-0xe2dfffff] [ 1.659409] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 1.659411] pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe2bfffff] [ 1.659413] pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe13fffff 64bit pref] [ 1.659415] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff] [ 1.659416] pci_bus 0000:09: resource 1 [mem 0xe1800000-0xe21fffff] [ 1.659418] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref] [ 1.659420] pci_bus 0000:0a: resource 1 [mem 0xe2c00000-0xe2cfffff] [ 1.659443] NET: Registered protocol family 2 [ 1.659632] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.660411] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.661522] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.661642] TCP: Hash tables configured (established 524288 bind 65536) [ 1.661644] TCP reno registered [ 1.661656] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.661686] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.661768] NET: Registered protocol family 1 [ 1.661779] pci 0000:00:02.0: Boot video device [ 1.661796] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.661835] pci 0000:00:1a.0: PCI INT A disabled [ 1.661859] pci 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.661880] pci 0000:00:1d.0: PCI INT A disabled [ 1.663645] PCI: CLS 64 bytes, default 64 [ 1.663650] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.663652] Placing 64MB software IO TLB between ffff8800c6a29000 - ffff8800caa29000 [ 1.663653] software IO TLB at phys 0xc6a29000 - 0xcaa29000 [ 1.663664] Simple Boot Flag at 0xf3 set to 0x1 [ 1.664055] audit: initializing netlink socket (disabled) [ 1.664066] type=2000 audit(1337851731.508:1): initialized [ 1.690403] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.708526] VFS: Disk quotas dquot_6.5.2 [ 1.708571] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.708932] fuse init (API version 7.17) [ 1.708994] msgmni has been set to 15726 [ 1.709309] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.709334] io scheduler noop registered [ 1.709335] io scheduler deadline registered [ 1.709359] io scheduler cfq registered (default) [ 1.709771] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.709787] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.709822] intel_idle: MWAIT substates: 0x21120 [ 1.709823] intel_idle: v0.4 model 0x2A [ 1.709824] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.710133] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.710502] ACPI: AC Adapter [AC] (on-line) [ 1.710781] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.711234] ACPI: Lid Switch [LID] [ 1.711263] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.711267] ACPI: Power Button [PBTN] [ 1.711309] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.711312] ACPI: Sleep Button [SBTN] [ 1.711338] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.711340] ACPI: Power Button [PWRF] [ 1.879626] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.879628] ACPI: Thermal Zone [THM] (25 C) [ 1.879646] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.879652] ACPI: Battery Slot [BAT0] (battery present) [ 1.879656] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.879661] ACPI: Battery Slot [BAT1] (battery absent) [ 1.879664] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.879669] ACPI: Battery Slot [BAT2] (battery absent) [ 1.879696] ERST: Table is not found! [ 1.879697] GHES: HEST is not enabled! [ 1.879787] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.199241] ACPI Error: [EABF] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dswload2-316) [ 2.199246] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20110623/psloop-231) [ 2.199249] ACPI Error: Method parse/execution failed [\_SB_.EEAC] (Node ffff880220059e10), AE_ALREADY_EXISTS (20110623/psparse-536) [ 2.199255] ACPI: Marking method EEAC as Serialized because of AE_ALREADY_EXISTS error [ 2.199258] ACPI Error: Method parse/execution failed [\_SB_.BAT2._STA] (Node ffff88022005a410), AE_ALREADY_EXISTS (20110623/psparse-536) [ 2.199263] ACPI: Marking method _STA as Serialized because of AE_ALREADY_EXISTS error [ 2.199268] ACPI Exception: AE_ERROR, Evaluating _STA (20110623/battery-396) [ 2.199270] ACPI: Battery Slot [BAT2] (battery absent) [ 2.199704] ACPI: Battery Slot [BAT1] (battery absent) [ 2.207333] ACPI: Battery Slot [BAT0] (battery present) [ 2.247309] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.267555] 0000:00:16.3: ttyS4 at I/O 0x40e0 (irq = 17) is a 16550A [ 2.303322] Linux agpgart interface v0.103 [ 2.303383] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 2.303500] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 2.304719] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 2.304820] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.305913] brd: module loaded [ 2.306477] loop: module loaded [ 2.306569] ahci 0000:00:1f.2: version 3.0 [ 2.306580] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.306623] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 2.306645] ahci: SSS flag set, parallel bus scan disabled [ 2.319166] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode [ 2.319169] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 2.319175] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.351480] scsi0 : ahci [ 2.351543] scsi1 : ahci [ 2.351598] scsi2 : ahci [ 2.351652] scsi3 : ahci [ 2.351705] scsi4 : ahci [ 2.351757] scsi5 : ahci [ 2.354575] ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 42 [ 2.354578] ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 42 [ 2.354580] ata3: DUMMY [ 2.354582] ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 42 [ 2.354585] ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 42 [ 2.354588] ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 42 [ 2.354842] Fixed MDIO Bus: probed [ 2.354855] tun: Universal TUN/TAP device driver, 1.6 [ 2.354856] tun: (C) 1999-2004 Max Krasnyansky [ 2.354896] PPP generic driver version 2.4.2 [ 2.354975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.354987] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.355006] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.355009] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 2.355042] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.355064] ehci_hcd 0000:00:1a.0: debug port 2 [ 2.358949] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 2.358960] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 [ 2.371085] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.371223] hub 1-0:1.0: USB hub found [ 2.371226] hub 1-0:1.0: 3 ports detected [ 2.371274] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.371285] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.371288] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.371320] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.371341] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.375210] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 2.375219] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 [ 2.391078] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.391204] hub 2-0:1.0: USB hub found [ 2.391207] hub 2-0:1.0: 3 ports detected [ 2.391250] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.391258] uhci_hcd: USB Universal Host Controller Interface driver [ 2.391288] usbcore: registered new interface driver libusual [ 2.391315] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.391514] i8042: Warning: Keylock active [ 2.392795] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.392800] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.392887] mousedev: PS/2 mouse device common for all mice [ 2.393036] rtc_cmos 00:06: RTC can wake from S4 [ 2.393144] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.393182] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 2.393248] device-mapper: uevent: version 1.0.3 [ 2.393298] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.393388] cpuidle: using governor ladder [ 2.393532] cpuidle: using governor menu [ 2.393533] EFI Variables Facility v0.08 2004-May-17 [ 2.393679] TCP cubic registered [ 2.393760] NET: Registered protocol family 10 [ 2.393841] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.394188] NET: Registered protocol family 17 [ 2.394198] Registering the dns_resolver key type [ 2.394303] PM: Hibernation image not present or could not be loaded. [ 2.394311] registered taskstats version 1 [ 2.409721] Magic number: 12:675:475 [ 2.409825] rtc_cmos 00:06: setting system clock to 2012-05-24 09:28:53 UTC (1337851733) [ 2.410464] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.410465] EDD information not available. [ 2.663070] Refined TSC clocksource calibration: 2693.880 MHz. [ 2.663083] Switching to clocksource tsc [ 2.671075] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.675719] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.683084] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.739400] ata1.00: ATA-8: LITEONIT LAT-256M2S, PNDA, max UDMA/133 [ 2.739410] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.743943] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.806202] ata1.00: configured for UDMA/133 [ 2.811230] scsi 0:0:0:0: Direct-Access ATA LITEONIT LAT-256 PNDA PQ: 0 ANSI: 5 [ 2.811362] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.811372] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.811621] sd 0:0:0:0: [sda] Write Protect is off [ 2.811623] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.811701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.812633] sda: sda1 sda2 < sda5 > [ 2.812996] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.815719] hub 1-1:1.0: USB hub found [ 2.815889] hub 1-1:1.0: 6 ports detected [ 2.927009] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 3.059677] hub 2-1:1.0: USB hub found [ 3.059850] hub 2-1:1.0: 8 ports detected [ 3.130936] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.131090] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd [ 3.141102] ata2.00: ATAPI: TSSTcorp DVD-ROM TS-U333B, D500, max UDMA/100 [ 3.155840] ata2.00: configured for UDMA/100 [ 3.161534] scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-U333B D500 PQ: 0 ANSI: 5 [ 3.170004] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 3.170014] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.170145] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.170217] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.223747] hub 1-1.1:1.0: USB hub found [ 3.223924] hub 1-1.1:1.0: 3 ports detected [ 3.295041] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd [ 3.387572] hub 1-1.2:1.0: USB hub found [ 3.387746] hub 1-1.2:1.0: 3 ports detected [ 3.458987] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd [ 3.486822] ata4: SATA link down (SStatus 0 SControl 300) [ 3.626934] usb 2-1.8: new full-speed USB device number 3 using ehci_hcd [ 3.741444] usb 2-1.8: config 0 descriptor?? [ 3.806723] ata5: SATA link down (SStatus 0 SControl 300) [ 3.838865] usb 1-1.1.1: new full-speed USB device number 6 using ehci_hcd [ 4.022804] usb 1-1.1.3: new high-speed USB device number 7 using ehci_hcd [ 4.117041] hub 1-1.1.3:1.0: USB hub found [ 4.117423] hub 1-1.1.3:1.0: 4 ports detected [ 4.126594] ata6: SATA link down (SStatus 0 SControl 300) [ 4.127657] Freeing unused kernel memory: 920k freed [ 4.127735] Write protecting the kernel read-only data: 12288k [ 4.131101] Freeing unused kernel memory: 1608k freed [ 4.133543] Freeing unused kernel memory: 1196k freed [ 4.143673] udevd[106]: starting version 175 [ 4.161028] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 4.161030] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 4.161065] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.161074] e1000e 0000:00:19.0: setting latency timer to 64 [ 4.161182] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4.163703] usbcore: registered new interface driver usbhid [ 4.163705] usbhid: USB HID core driver [ 4.183858] sdhci: Secure Digital Host Controller Interface driver [ 4.183861] sdhci: Copyright(c) Pierre Ossman [ 4.185071] sdhci-pci 0000:0a:00.0: SDHCI controller found [1217:8221] (rev 5) [ 4.186832] sdhci-pci 0000:0a:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.186916] sdhci-pci 0000:0a:00.0: Invalid iomem size. You may experience problems. [ 4.186953] sdhci-pci 0000:0a:00.0: setting latency timer to 64 [ 4.186967] mmc0: no vmmc regulator found [ 4.186992] Registered led device: mmc0:: [ 4.188025] mmc0: SDHCI controller on PCI [0000:0a:00.0] using DMA [ 4.198946] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.206737] usb 1-1.2.1: new high-speed USB device number 8 using ehci_hcd [ 4.299187] hub 1-1.2.1:1.0: USB hub found [ 4.299281] hub 1-1.2.1:1.0: 2 ports detected [ 4.350267] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:0e:02:ff [ 4.350270] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.350319] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 2041FF-0FF [ 4.390968] usb 1-1.1.3.1: new high-speed USB device number 9 using ehci_hcd [ 4.485003] hub 1-1.1.3.1:1.0: USB hub found [ 4.485406] hub 1-1.1.3.1:1.0: 4 ports detected [ 4.558704] usb 1-1.1.3.3: new high-speed USB device number 10 using ehci_hcd [ 4.680203] Initializing USB Mass Storage driver... [ 4.680331] scsi6 : usb-storage 1-1.1.3.3:1.0 [ 4.680379] usbcore: registered new interface driver usb-storage [ 4.680380] USB Mass Storage support registered. [ 4.742651] usb 1-1.1.3.4: new high-speed USB device number 11 using ehci_hcd [ 4.826642] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.833536] udevd[363]: starting version 175 [ 4.949271] lp: driver loaded but no devices found [ 5.047244] Adding 8265724k swap on /dev/sda5. Priority:-1 extents:1 across:8265724k SS [ 5.073818] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr [ 5.115702] wmi: Mapper loaded [ 5.134829] parport_pc 00:08: [io 0x0378-0x037b] [ 5.136607] parport_pc 00:08: [irq 5] [ 5.137930] [drm] Initialized drm 1.1.0 20060810 [ 5.147888] Bluetooth: Core ver 2.16 [ 5.147922] NET: Registered protocol family 31 [ 5.147924] Bluetooth: HCI device and connection manager initialized [ 5.147926] Bluetooth: HCI socket layer initialized [ 5.147928] Bluetooth: L2CAP socket layer initialized [ 5.147933] Bluetooth: SCO socket layer initialized [ 5.149215] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 5.152235] usbcore: registered new interface driver btusb [ 5.159267] cfg80211: Calling CRDA to update world regulatory domain [ 5.165368] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 5.165667] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.165673] mei 0000:00:16.0: setting latency timer to 64 [ 5.165731] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 5.181987] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 5.181990] Copyright(c) 2003-2011 Intel Corporation [ 5.186473] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.186478] i915 0000:00:02.0: setting latency timer to 64 [ 5.186615] iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.186647] iwlwifi 0000:02:00.0: setting latency timer to 64 [ 5.186685] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 [ 5.186687] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900057a8000 [ 5.186689] iwlwifi 0000:02:00.0: HW Revision ID = 0x34 [ 5.186893] iwlwifi 0000:02:00.0: irq 45 for MSI/MSI-X [ 5.186971] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 5.187046] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 5.196351] iwlwifi 0000:02:00.0: device EEPROM VER=0x715, CALIB=0x6 [ 5.196355] iwlwifi 0000:02:00.0: Device SKU: 0X1f0 [ 5.196357] iwlwifi 0000:02:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3 [ 5.199387] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1.1/input2 [ 5.202530] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.2/0003:046D:C52B.0003/input/input5 [ 5.203272] type=1400 audit(1337876936.293:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=616 comm="apparmor_parser" [ 5.203590] type=1400 audit(1337876936.293:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=616 comm="apparmor_parser" [ 5.203770] type=1400 audit(1337876936.293:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=616 comm="apparmor_parser" [ 5.205115] type=1400 audit(1337876936.293:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=663 comm="apparmor_parser" [ 5.205400] type=1400 audit(1337876936.293:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=663 comm="apparmor_parser" [ 5.205564] type=1400 audit(1337876936.293:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=663 comm="apparmor_parser" [ 5.238223] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 5.238274] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1a.0-1.1.1:2 [ 5.238447] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.2/0003:046D:C52B.0003/input/input6 [ 5.238609] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:1a.0-1.1.1:1 [ 5.247009] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.289872] i915 0000:00:02.0: irq 46 for MSI/MSI-X [ 5.289877] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.289879] [drm] Driver supports precise vblank timestamp query. [ 5.311110] ppdev: user-space parallel port driver [ 5.314743] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.321005] init: failsafe main process (758) killed by TERM signal [ 5.343220] cfg80211: World regulatory domain updated: [ 5.343223] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.343226] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.343228] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.343231] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.343233] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.343235] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.368806] iwlwifi 0000:02:00.0: loaded firmware version 17.168.5.3 build 42301 [ 5.368943] Registered led device: phy0-led [ 5.368967] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 5.376287] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 5.381656] type=1400 audit(1337876936.469:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=860 comm="apparmor_parser" [ 5.381928] type=1400 audit(1337876936.469:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=860 comm="apparmor_parser" [ 5.382073] type=1400 audit(1337876936.469:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=860 comm="apparmor_parser" [ 5.429354] Bluetooth: RFCOMM TTY layer initialized [ 5.429359] Bluetooth: RFCOMM socket layer initialized [ 5.429360] Bluetooth: RFCOMM ver 1.11 [ 5.435534] input: Dell WMI hotkeys as /devices/virtual/input/input7 [ 5.437514] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.437517] Bluetooth: BNEP filters: protocol multicast [ 5.481548] init: alsa-restore main process (948) terminated with status 19 [ 5.492234] scsi7 : usb-storage 1-1.1.3.4:1.0 [ 5.548905] /dev/vmmon[1027]: Module vmmon: registered with major=10 minor=165 [ 5.548910] /dev/vmmon[1027]: Module vmmon: initialized [ 5.557448] [1036]: VMCI: shared components initialized. [ 5.557475] [1036]: VMCI: host components initialized. [ 5.557538] [1036]: VMCI: Module registered (name=vmci,major=10,minor=57). [ 5.557540] [1036]: VMCI: Using host personality [ 5.557542] [1036]: VMCI: Module (name=vmci) is initialized [ 5.578093] usb 1-1.2.1.1: new high-speed USB device number 12 using ehci_hcd [ 5.681197] scsi 6:0:0:0: Direct-Access Seagate FreeAgent Pro 4109 PQ: 0 ANSI: 4 [ 5.682516] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 5.685065] sd 6:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 5.686560] sd 6:0:0:0: [sdb] Write Protect is off [ 5.686563] sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00 [ 5.688066] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.693946] sdb: sdb1 [ 5.707183] sd 6:0:0:0: [sdb] Attached SCSI disk [ 5.726137] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 5.782026] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 5.782477] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.782721] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.784366] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 5.784567] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 5.828255] fbcon: inteldrmfb (fb0) is primary device [ 5.828349] Console: switching to colour frame buffer device 170x48 [ 5.828370] fb0: inteldrmfb frame buffer device [ 5.828372] drm: registered panic notifier [ 5.858156] parport_pc 00:08: activated [ 5.858162] parport_pc 00:08: reported by Plug and Play ACPI [ 5.858349] parport_pc 00:08: disabled [ 5.978584] Linux video capture interface: v2.00 [ 6.069513] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 6.069706] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 6.187944] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.188507] /dev/vmnet: open called by PID 1159 (vmnet-bridge) [ 6.188513] /dev/vmnet: hub 0 does not exist, allocating memory. [ 6.188529] /dev/vmnet: port on hub 0 successfully opened [ 6.188542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.188545] bridge-wlan0: device is wireless, enabling SMAC [ 6.188548] bridge-wlan0: up [ 6.188550] bridge-wlan0: attached [ 6.188615] bridge-wlan0: disabling the bridge [ 6.205857] bridge-wlan0: down [ 6.205863] bridge-wlan0: detached [ 6.314052] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input8 [ 6.327179] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input9 [ 6.393638] usbcore: registered new interface driver snd-usb-audio [ 6.393642] uvcvideo: Found UVC 1.00 device (046d:0821) [ 6.401999] acpi device:37: registered as cooling_device4 [ 6.406884] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1.1/1-1.2.1.1:1.2/input/input10 [ 6.407180] usbcore: registered new interface driver uvcvideo [ 6.407182] USB Video Class driver (1.1.1) [ 6.477871] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 6.477915] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 6.477975] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.478019] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.478109] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 6.478131] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 6.482232] /dev/vmnet: open called by PID 1186 (vmnet-netifup) [ 6.482239] /dev/vmnet: hub 1 does not exist, allocating memory. [ 6.482257] /dev/vmnet: port on hub 1 successfully opened [ 6.494313] scsi 7:0:0:0: Direct-Access WD My Book 1130 1012 PQ: 0 ANSI: 6 [ 6.496188] scsi 7:0:0:1: Enclosure WD SES Device 1012 PQ: 0 ANSI: 6 [ 6.497105] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 6.497561] scsi 7:0:0:1: Attached scsi generic sg4 type 13 [ 6.497889] sd 7:0:0:0: [sdc] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 6.499034] sd 7:0:0:0: [sdc] Write Protect is off [ 6.499038] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 6.499554] sd 7:0:0:0: [sdc] No Caching mode page present [ 6.499557] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 6.501321] sd 7:0:0:0: [sdc] No Caching mode page present [ 6.501330] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 6.505715] /dev/vmnet: open called by PID 1194 (vmnet-dhcpd) [ 6.505725] /dev/vmnet: port on hub 1 successfully opened [ 6.515797] /dev/vmnet: open called by PID 1212 (vmnet-natd) [ 6.515803] /dev/vmnet: hub 8 does not exist, allocating memory. [ 6.515814] /dev/vmnet: port on hub 8 successfully opened [ 6.518194] /dev/vmnet: open called by PID 1213 (vmnet-netifup) [ 6.518202] /dev/vmnet: port on hub 8 successfully opened [ 6.527458] /dev/vmnet: open called by PID 1216 (vmnet-dhcpd) [ 6.527469] /dev/vmnet: port on hub 8 successfully opened [ 8.089986] [drm] Changing LVDS panel from (+hsync, -vsync) to (+hsync, +vsync) [ 9.142828] sdc: sdc1 [ 9.146343] sd 7:0:0:0: [sdc] No Caching mode page present [ 9.146353] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 9.146360] sd 7:0:0:0: [sdc] Attached SCSI disk [ 9.159082] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 9.159120] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 9.159167] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0 [ 9.159244] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 9.159313] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 9.159371] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 9.159426] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 9.159475] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 9.159522] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 9.159573] input: HDA Intel PCH Dock Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 9.236059] ses 7:0:0:1: Attached Enclosure device [ 9.257359] init: plymouth-stop pre-start process (1982) terminated with status 1 [ 13.770700] wlan0: authenticate with 68:7f:74:9d:88:89 (try 1) [ 13.773545] wlan0: authenticated [ 13.813155] wlan0: associate with 68:7f:74:9d:88:89 (try 1) [ 13.819598] wlan0: RX AssocResp from 68:7f:74:9d:88:89 (capab=0x411 status=0 aid=1) [ 13.819608] wlan0: associated [ 13.824569] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 13.848898] /dev/vmnet: open called by PID 1159 (vmnet-bridge) [ 13.848908] /dev/vmnet: hub 0 does not exist, allocating memory. [ 13.848925] /dev/vmnet: port on hub 0 successfully opened [ 13.848937] bridge-wlan0: device is wireless, enabling SMAC [ 13.848940] bridge-wlan0: up [ 13.848942] bridge-wlan0: attached [ 14.049097] userif-3: sent link down event. [ 14.049107] userif-3: sent link up event. [ 16.541942] userif-3: sent link down event. [ 16.541951] userif-3: sent link up event. [ 16.918490] vmnet8: no IPv6 routers present [ 17.366310] vmnet1: no IPv6 routers present [ 17.584511] userif-3: sent link down event. [ 17.584514] userif-3: sent link up event. [ 24.636046] wlan0: no IPv6 routers present [ 54.445705] CPU2: Package power limit notification (total events = 1) [ 54.445709] CPU3: Package power limit notification (total events = 1) [ 54.445711] CPU1: Package power limit notification (total events = 1) [ 54.445714] CPU0: Package power limit notification (total events = 1) [ 54.456684] CPU2: Package power limit normal [ 54.456687] CPU3: Package power limit normal [ 54.456689] CPU1: Package power limit normal [ 54.456692] CPU0: Package power limit normal [ 117.201481] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = 68:7f:74:9d:88:89 tid = 0 [ 803.897966] usb 1-1.2.1: USB disconnect, device number 8 [ 803.897976] usb 1-1.2.1.1: USB disconnect, device number 12 [ 1109.705001] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.1.1/input2, status -71 [ 1109.709764] usb 1-1.1: clear tt 1 (0060) error -71 [ 1109.713976] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.1.1/input2, status -71 [ 1109.716398] usb 1-1.1: USB disconnect, device number 3 [ 1109.716406] usb 1-1.1.1: USB disconnect, device number 6 [ 1109.719579] usb 1-1.1: clear tt 1 (0060) error -71 [ 1109.889000] usb 1-1.1.3: USB disconnect, device number 7 [ 1109.889011] usb 1-1.1.3.1: USB disconnect, device number 9 [ 1109.890200] usb 1-1.1.3.3: USB disconnect, device number 10 [ 1109.900637] sd 6:0:0:0: [sdb] Synchronizing SCSI cache [ 1109.900834] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 1109.901420] usb 1-1.1.3.4: USB disconnect, device number 11 [ 1110.032182] usb 1-1.2: USB disconnect, device number 4 [ 1111.671788] e1000e 0000:00:19.0: PCI INT A disabled [ 1111.671821] e1000e 0000:00:19.0: PME# enabled [ 1111.766067] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, +vsync) [ 1437.621249] wlan0: deauthenticated from 68:7f:74:9d:88:89 (Reason: 7) [ 1437.623092] bridge-wlan0: disabling the bridge [ 1437.627923] bridge-wlan0: down [ 1437.627942] bridge-wlan0: detached [ 1437.775878] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1437.775894] cfg80211: Restoring regulatory settings [ 1437.775904] cfg80211: Calling CRDA to update world regulatory domain [ 1437.783396] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1437.783405] cfg80211: World regulatory domain updated: [ 1437.783409] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1437.783416] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1437.783423] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1437.783428] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1437.783434] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1437.783439] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1437.823030] userif-3: sent link down event. [ 1437.823039] userif-3: sent link up event. [ 1440.989067] wlan0: authenticate with 68:7f:74:9d:88:89 (try 1) [ 1440.991864] wlan0: authenticated [ 1440.992416] wlan0: associate with 68:7f:74:9d:88:89 (try 1) [ 1440.996296] wlan0: RX ReassocResp from 68:7f:74:9d:88:89 (capab=0x411 status=0 aid=1) [ 1440.996306] wlan0: associated [ 1441.027802] /dev/vmnet: open called by PID 1159 (vmnet-bridge) [ 1441.027811] /dev/vmnet: hub 0 does not exist, allocating memory. [ 1441.027828] /dev/vmnet: port on hub 0 successfully opened [ 1441.027837] bridge-wlan0: device is wireless, enabling SMAC [ 1441.027839] bridge-wlan0: up [ 1441.028233] bridge-wlan0: attached [ 1441.228031] userif-3: sent link down event. [ 1441.228039] userif-3: sent link up event. [ 1442.574287] bridge-wlan0: disabling the bridge [ 1442.638031] bridge-wlan0: down [ 1442.638049] bridge-wlan0: detached [ 1442.770154] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1442.770169] cfg80211: Restoring regulatory settings [ 1442.770180] cfg80211: Calling CRDA to update world regulatory domain [ 1442.774091] userif-3: sent link down event. [ 1442.774103] userif-3: sent link up event. [ 1442.777870] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1442.777879] cfg80211: World regulatory domain updated: [ 1442.777908] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1442.777918] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1442.777925] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1442.777935] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1442.777945] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1442.777955] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1445.960302] wlan0: authenticate with 68:7f:74:9d:88:89 (try 1) [ 1446.156965] wlan0: authenticate with 68:7f:74:9d:88:89 (try 2) [ 1446.174811] wlan0: authenticated [ 1446.189333] wlan0: associate with 68:7f:74:9d:88:89 (try 1) [ 1446.214322] wlan0: RX ReassocResp from 68:7f:74:9d:88:89 (capab=0x411 status=0 aid=1) [ 1446.214338] wlan0: associated [ 1446.307841] /dev/vmnet: open called by PID 1159 (vmnet-bridge) [ 1446.307870] /dev/vmnet: hub 0 does not exist, allocating memory. [ 1446.307942] /dev/vmnet: port on hub 0 successfully opened [ 1446.307972] bridge-wlan0: device is wireless, enabling SMAC [ 1446.307985] bridge-wlan0: up [ 1446.307991] bridge-wlan0: attached [ 1446.507980] userif-3: sent link down event. [ 1446.507988] userif-3: sent link up event. [ 1447.574521] bridge-wlan0: disabling the bridge [ 1447.640435] bridge-wlan0: down [ 1447.640458] bridge-wlan0: detached [ 1447.740655] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1447.740670] cfg80211: Restoring regulatory settings [ 1447.740681] cfg80211: Calling CRDA to update world regulatory domain [ 1447.748184] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1447.748193] cfg80211: World regulatory domain updated: [ 1447.748197] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1447.748204] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1447.748211] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1447.748217] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1447.748222] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1447.748228] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1447.774336] userif-3: sent link down event. [ 1447.774345] userif-3: sent link up event. [ 1450.980382] wlan0: authenticate with 68:7f:74:9d:88:89 (try 1) [ 1451.179364] wlan0: authenticate with 68:7f:74:9d:88:89 (try 2) [ 1451.379257] wlan0: authenticate with 68:7f:74:9d:88:89 (try 3) [ 1451.579237] wlan0: authentication with 68:7f:74:9d:88:89 timed out [ 1462.944930] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1463.145308] userif-3: sent link down event. [ 1463.145317] userif-3: sent link up event. [ 1516.381318] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [ 2952.591971] wlan0: authenticate with 00:1b:0d:d7:3c:71 (try 1) [ 2952.594166] wlan0: authenticated [ 2952.634822] wlan0: associate with 00:1b:0d:d7:3c:71 (try 1) [ 2952.636847] wlan0: RX AssocResp from 00:1b:0d:d7:3c:71 (capab=0x431 status=0 aid=18) [ 2952.636856] wlan0: associated [ 2952.642693] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2952.797117] /dev/vmnet: open called by PID 1159 (vmnet-bridge) [ 2952.797144] /dev/vmnet: hub 0 does not exist, allocating memory. [ 2952.797187] /dev/vmnet: port on hub 0 successfully opened [ 2952.797209] bridge-wlan0: device is wireless, enabling SMAC [ 2952.797216] bridge-wlan0: up [ 2952.797223] bridge-wlan0: attached [ 2952.996829] userif-3: sent link down event. [ 2952.996838] userif-3: sent link up event. [ 2954.194826] userif-3: sent link down event. [ 2954.194835] userif-3: sent link up event. [ 2963.541967] wlan0: no IPv6 routers present [ 2986.919077] usb 1-1.1: new high-speed USB device number 13 using ehci_hcd [ 2987.012114] hub 1-1.1:1.0: USB hub found [ 2987.012240] hub 1-1.1:1.0: 3 ports detected [ 2987.086867] usb 1-1.2: new high-speed USB device number 14 using ehci_hcd [ 2987.179711] hub 1-1.2:1.0: USB hub found [ 2987.179899] hub 1-1.2:1.0: 3 ports detected [ 2987.282798] usb 1-1.1.2: new full-speed USB device number 15 using ehci_hcd [ 2987.382614] logitech-djreceiver 0003:046D:C52B.0008: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1.2/input2 [ 2987.385819] input: Logitech Unifying Device. Wireless PID:2010 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.2/0003:046D:C52B.0008/input/input19 [ 2987.385951] logitech-djdevice 0003:046D:C52B.0009: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:1a.0-1.1.2:1 [ 2987.388619] input: Logitech Unifying Device. Wireless PID:101d as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.2/0003:046D:C52B.0008/input/input20 [ 2987.389687] logitech-djdevice 0003:046D:C52B.000A: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101d] on usb-0000:00:1a.0-1.1.2:2 [ 2987.582608] usb 1-1.2.1: new high-speed USB device number 16 using ehci_hcd [ 2987.675141] hub 1-1.2.1:1.0: USB hub found [ 2987.675279] hub 1-1.2.1:1.0: 4 ports detected [ 2989.133160] e1000e 0000:00:19.0: BAR 0: set to [mem 0xe2e00000-0xe2e1ffff] (PCI address [0xe2e00000-0xe2e1ffff]) [ 2989.133177] e1000e 0000:00:19.0: BAR 1: set to [mem 0xe2e80000-0xe2e80fff] (PCI address [0xe2e80000-0xe2e80fff]) [ 2989.133190] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [ 2989.185097] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 2989.185151] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 2989.292946] e1000e 0000:00:19.0: PME# disabled [ 2989.293010] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 2992.396172] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 2992.397689] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2992.600038] userif-3: sent link down event. [ 2992.600047] userif-3: sent link up event. [ 2996.297638] userif-3: sent link down event. [ 2996.297641] userif-3: sent link up event. [ 2997.250493] bridge-wlan0: disabling the bridge [ 2997.274430] bridge-wlan0: down [ 2997.274451] bridge-wlan0: detached [ 2997.274561] /dev/vmnet: open called by PID 1159 (vmnet-bridge) [ 2997.274586] /dev/vmnet: hub 0 does not exist, allocating memory. [ 2997.274660] /dev/vmnet: port on hub 0 successfully opened [ 2997.274692] bridge-eth0: up [ 2997.274702] bridge-eth0: attached [ 2997.450321] userif-3: sent link down event. [ 2997.450332] userif-3: sent link up event. [ 3002.702014] eth0: no IPv6 routers present [ 3200.599570] CPU2: Package power limit notification (total events = 2) [ 3200.599574] CPU0: Package power limit notification (total events = 2) [ 3200.599577] CPU3: Package power limit notification (total events = 2) [ 3200.599580] CPU1: Package power limit notification (total events = 2) [ 3200.603553] CPU0: Package power limit normal [ 3200.603556] CPU2: Package power limit normal [ 3200.603559] CPU3: Package power limit normal [ 3200.603561] CPU1: Package power limit normal [ 3321.687055] show_signal_msg: 66 callbacks suppressed [ 3321.687068] compiz[2426]: segfault at 0 ip (null) sp 00007fff87979868 error 14 in compiz[400000+d000] [ 3584.512917] CPU2: Package power limit notification (total events = 19) [ 3584.512921] CPU3: Package power limit notification (total events = 19) [ 3584.512924] CPU1: Package power limit notification (total events = 19) [ 3584.512926] CPU0: Package power limit notification (total events = 19) [ 3584.523924] CPU1: Package power limit normal [ 3584.523928] CPU3: Package power limit normal [ 3584.523950] CPU0: Package power limit normal [ 3584.523953] CPU2: Package power limit normal [ 9271.720099] CPU3: Package power limit notification (total events = 20) [ 9271.720104] CPU2: Package power limit notification (total events = 20) [ 9271.720107] CPU1: Package power limit notification (total events = 20) [ 9271.720110] CPU0: Package power limit notification (total events = 20) [ 9271.733093] CPU2: Package power limit normal [ 9271.733097] CPU1: Package power limit normal [ 9271.733100] CPU3: Package power limit normal [ 9271.733102] CPU0: Package power limit normal [10183.563576] CPU2: Package power limit notification (total events = 22) [10183.563580] CPU1: Package power limit notification (total events = 22) [10183.563583] CPU3: Package power limit notification (total events = 22) [10183.563586] CPU0: Package power limit notification (total events = 22) [10183.569645] CPU0: Package power limit normal [10183.569650] CPU1: Package power limit normal [10183.569654] CPU2: Package power limit normal [10183.569657] CPU3: Package power limit normal [10576.970448] CPU0: Package power limit notification (total events = 37) [10576.970452] CPU3: Package power limit notification (total events = 37) [10576.970455] CPU2: Package power limit notification (total events = 37) [10576.970458] CPU1: Package power limit notification (total events = 37) [10576.974859] CPU1: Package power limit normal [10576.974867] CPU3: Package power limit normal [10576.974893] CPU2: Package power limit normal [10576.974901] CPU0: Package power limit normal [14019.040141] CPU1: Package power limit notification (total events = 503) [14019.040144] CPU3: Package power limit notification (total events = 503) [14019.040148] CPU2: Package power limit notification (total events = 503) [14019.040151] CPU0: Package power limit notification (total events = 503) [14019.045771] CPU3: Package power limit normal [14019.045773] CPU1: Package power limit normal [14019.045776] CPU2: Package power limit normal [14019.045778] CPU0: Package power limit normal [14454.192370] CPU1: Package power limit notification (total events = 850) [14454.192374] CPU3: Package power limit notification (total events = 850) [14454.192377] CPU2: Package power limit notification (total events = 850) [14454.192380] CPU0: Package power limit notification (total events = 850) [14454.198645] CPU1: Package power limit normal [14454.198647] CPU3: Package power limit normal [14454.198650] CPU2: Package power limit normal [14454.198652] CPU0: Package power limit normal [14938.571584] CPU2: Package power limit notification (total events = 855) [14938.571588] CPU1: Package power limit notification (total events = 855) [14938.571591] CPU3: Package power limit notification (total events = 855) [14938.571594] CPU0: Package power limit notification (total events = 855) [14938.575535] CPU0: Package power limit normal [14938.575538] CPU3: Package power limit normal [14938.575540] CPU1: Package power limit normal [14938.575542] CPU2: Package power limit normal [15995.361614] CPU2: Package power limit notification (total events = 882) [15995.361618] CPU0: Package power limit notification (total events = 882) [15995.361621] CPU3: Package power limit notification (total events = 882) [15995.361624] CPU1: Package power limit notification (total events = 882) [15995.364433] CPU3: Package power limit normal [15995.364436] CPU2: Package power limit normal [15995.364438] CPU0: Package power limit normal [15995.364440] CPU1: Package power limit normal [16596.268280] CPU1: Package power limit notification (total events = 923) [16596.268284] CPU2: Package power limit notification (total events = 923) [16596.268287] CPU3: Package power limit notification (total events = 923) [16596.268290] CPU0: Package power limit notification (total events = 923) [16596.275979] CPU1: Package power limit normal [16596.275983] CPU3: Package power limit normal [16596.276003] CPU0: Package power limit normal [16596.276005] CPU2: Package power limit normal