[299737.916594] ieee80211 phy16: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 0
[299737.974628] wlan0: associated
[299742.708938] ieee80211 phy16: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[299743.912647] cfg80211: Calling CRDA to update world regulatory domain
[299743.915802] cfg80211: World regulatory domain updated:
[299743.915807] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[299743.915810] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[299743.915813] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[299743.915815] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[299743.915817] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[299743.915819] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[299744.881339] systemd-hostnamed[19366]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[299750.198385] wlan0: authenticate with 28:be:9b:be:2e:c5
[299750.345901] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[299750.377788] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[299750.417839] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[299750.453863] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[299772.101756] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[299780.565274] wlan0: authenticate with 28:be:9b:be:2e:c5
[299780.709090] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[299780.910665] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[299781.114763] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[299781.117195] wlan0: authenticated
[299781.118892] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[299781.186370] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[299781.293269] wlan0: associated
[299781.293308] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[299786.973967] cfg80211: Calling CRDA to update world regulatory domain
[299786.977441] cfg80211: World regulatory domain updated:
[299786.977446] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[299786.977448] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[299786.977451] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[299786.977453] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[299786.977455] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[299786.977457] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[299790.687249] wlan0: authenticate with 28:be:9b:be:2e:c5
[299790.835082] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[299790.871074] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[299790.909139] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[299790.945129] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[299795.117522] wlan0: authenticate with 28:be:9b:be:2e:c5
[299795.261283] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[299795.462238] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[299795.666346] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[299795.870423] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[299826.397795] wlan0: authenticate with 28:be:9b:be:2e:c5
[299826.543932] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[299826.746485] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[299826.950625] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[299827.129281] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[299827.132302] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=3)
[299830.823358] wlan0: authenticate with 28:be:9b:be:2e:c5
[299830.971287] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[299831.172789] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[299831.376820] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[299831.580977] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[299920.649032] usb 5-3: USB disconnect, device number 3
[299922.263986] ieee80211 phy16: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[299926.994460] usb 2-3: new high-speed USB device number 21 using ehci-pci
[299927.144556] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[299927.144562] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[299927.144565] usb 2-3: Product: 802.11 n WLAN
[299927.144568] usb 2-3: Manufacturer: Ralink
[299927.144570] usb 2-3: SerialNumber: 1.0
[299927.258663] usb 2-3: reset high-speed USB device number 21 using ehci-pci
[299927.338800] ieee80211 phy17: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[299927.338807] ieee80211 phy17: rt2800_probe_rt: Error - Invalid RT chipset 0xffff, rev 8801 detected
[299927.338810] ieee80211 phy17: rt2x00lib_probe_dev: Error - Failed to allocate device
[299927.339539] usb 2-3: USB disconnect, device number 21
[299927.578850] usb 2-3: new high-speed USB device number 22 using ehci-pci
[299927.728645] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[299927.728651] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[299927.728655] usb 2-3: Product: 802.11 n WLAN
[299927.728657] usb 2-3: Manufacturer: Ralink
[299927.728659] usb 2-3: SerialNumber: 1.0
[299927.843115] usb 2-3: reset high-speed USB device number 22 using ehci-pci
[299927.985595] ieee80211 phy18: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[299928.015519] ieee80211 phy18: rt2x00_set_rf: Info - RF chipset 5370 detected
[299928.015968] ieee80211 phy18: Selected rate control algorithm 'minstrel_ht'
[299928.285809] ieee80211 phy18: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[299928.324838] ieee80211 phy18: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[299928.578462] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[299928.579469] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[299938.533472] wlan0: authenticate with 28:be:9b:be:2e:c5
[299938.569788] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[299938.573000] wlan0: authenticated
[299938.576787] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[299938.579447] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[299938.587175] wlan0: associated
[299938.587210] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[299967.237227] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[299967.237242] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[299967.237245] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[299967.332429] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299972.125285] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[299972.125295] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[299972.125297] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[299972.133181] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[299972.133207] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[299972.133209] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[299972.287470] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299972.293211] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299972.970074] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[299972.970092] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[299972.970096] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[299972.974832] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[299972.974861] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[299972.974864] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[299972.974877] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[299973.087248] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299973.240298] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299973.555322] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299975.969471] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[299975.969529] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[299975.969532] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[299976.016190] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299977.486727] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[299977.486765] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[299977.486778] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[299977.486811] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[299977.486820] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[299977.494865] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[299977.494895] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[299977.494901] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[299977.516997] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299977.517115] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299977.517239] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299977.540888] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.616892] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 0
[299994.616925] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 0
[299994.616929] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 0
[299994.616944] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[299994.620268] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[299994.620299] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[299994.620302] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[299994.624811] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[299994.624836] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[299994.624839] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[299994.628263] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[299994.628282] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[299994.628285] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[299994.628321] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[299994.628329] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[299994.628335] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[299994.632778] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[299994.632812] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[299994.632815] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[299994.632853] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[299994.636139] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[299994.636396] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[299994.636399] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[299994.636436] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[299994.636446] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[299994.640658] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[299994.640763] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[299994.640767] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[299994.640857] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[299994.640868] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[299994.648663] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[299994.683072] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.683206] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.687734] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.786640] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.786754] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.786892] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.787003] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.787141] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.787251] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.787374] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.787518] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.787636] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.787754] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.787872] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[299994.788014] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.226076] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300000.226115] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300000.226125] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300000.226147] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300000.226211] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300000.226221] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300000.230568] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300000.230580] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300000.230582] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300000.233940] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300000.233949] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300000.233950] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300000.238444] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300000.238507] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300000.238509] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300000.241818] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300000.241969] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300000.241971] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300000.246318] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300000.246339] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300000.246345] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300000.246379] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300000.250821] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300000.250833] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300000.250835] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300000.254220] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300000.254310] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300000.254313] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300000.258708] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300000.258727] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300000.258729] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300000.262076] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300000.262086] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300000.262088] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300000.262115] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300000.274461] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300000.274478] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300000.274480] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300000.330853] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 0
[300000.330874] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 0
[300000.330879] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 0
[300000.330893] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300000.330922] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300000.330929] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300000.334235] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300000.334240] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300000.346999] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300000.347043] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300000.347047] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300000.350357] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300000.350389] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300000.350395] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300000.350431] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300000.354859] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300000.354877] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300000.354882] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300000.369488] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300000.426793] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.444154] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.444307] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.465189] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.465306] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.465432] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.465556] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.465682] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.515103] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.515236] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.515353] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.515485] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.515605] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.515722] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.515864] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.549317] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.549488] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.549558] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.549731] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.549807] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.549987] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.586959] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300000.660726] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300003.249423] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300003.249443] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300003.249449] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300003.249467] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300003.277679] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300003.277697] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300003.277703] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300003.303569] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300003.303698] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300003.331835] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300003.894437] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300003.894509] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300003.894523] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300003.909552] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300003.909599] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300003.909602] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300003.925047] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300003.946208] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300005.371584] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300005.371623] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300005.371627] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300005.371654] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300005.551516] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300005.551536] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300005.551543] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300005.567275] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300005.567302] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300005.567309] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300005.643573] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300005.728224] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
[300005.728284] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
[300005.728292] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
[300005.800299] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300005.834128] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300005.905544] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300005.905681] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300007.145499] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300007.145577] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300007.145588] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300007.145609] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300007.164873] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300007.164918] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300007.164921] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300007.164935] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300007.164942] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300007.169368] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300007.169392] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300007.169395] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300007.449358] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300007.451740] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300007.457490] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300007.458729] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300007.534256] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
[300007.534342] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
[300007.534354] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
[300007.611655] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300007.643797] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300008.176241] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300008.906773] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300008.906838] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300008.906846] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300009.007195] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300009.007247] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300009.007255] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300009.255135] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300009.255193] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300009.255206] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300009.283293] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300009.283397] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300009.283415] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300009.331106] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300009.331176] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300009.331288] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300009.341841] ieee80211 phy18: rt2800usb_txdone: Warning - Data pending for entry 1 in queue 2
[300011.109811] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300011.109847] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300011.109850] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300011.109887] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300011.109895] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300011.109898] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300011.109901] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300011.109903] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300011.109906] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300011.109908] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300011.109911] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300011.109914] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300011.340272] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300011.415595] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300011.415668] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300011.415796] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300011.415929] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300011.416058] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300011.416175] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300011.416295] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300011.416448] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300011.441683] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300012.822812] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300012.822836] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300012.822839] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300012.955980] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300015.982864] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300015.982932] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300015.982949] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300015.986367] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300015.986406] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300015.986413] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300016.013654] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300016.018258] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300016.018320] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300016.018327] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300016.120398] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300016.261957] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300019.353571] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300019.353607] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300019.353614] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300019.375485] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300019.661827] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300019.661896] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300019.661910] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300019.838402] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300019.838475] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300019.838492] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300019.841964] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300019.841978] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300019.864200] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300019.864322] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300019.871948] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300019.896713] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300022.396472] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300022.396544] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300022.396555] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300022.396587] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300022.404457] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300022.404496] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300022.404503] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300022.408975] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300022.409036] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300022.409043] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300022.437590] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300022.437765] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300022.437831] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300022.438013] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300022.817370] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300022.817435] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300022.817443] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300022.841169] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300023.886382] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300023.886452] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300023.886463] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300023.921307] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300024.142851] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300024.142915] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300024.142932] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300024.142974] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300024.171600] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300024.260167] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300024.558762] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300024.558830] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300024.558849] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300025.158200] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300025.560121] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300025.560185] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300025.560193] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300025.626913] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300025.780710] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300025.780779] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300025.780790] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300026.235523] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300027.951103] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300027.951158] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300027.951172] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300028.048423] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300029.308380] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300029.308443] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300029.308451] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300029.354625] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300030.724907] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300030.724954] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300030.724969] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300030.725017] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300030.729519] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300030.729587] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300030.729603] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300030.765936] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300030.771698] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300030.774207] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.678877] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
[300043.678909] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
[300043.678913] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
[300043.686753] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300043.686780] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300043.686785] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300043.699133] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300043.699170] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300043.699179] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300043.702513] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300043.703007] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300043.703014] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300043.703073] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300043.710378] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300043.710417] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300043.710422] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300043.714886] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300043.714943] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300043.714957] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300043.722758] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300043.722811] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300043.722823] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300043.726143] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300043.726640] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300043.726647] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300043.730646] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300043.730734] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300043.730746] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300043.730773] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300043.735219] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300043.735425] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300043.735431] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300043.735442] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300043.738639] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300043.738660] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300043.738665] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300043.746526] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300043.746582] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300043.746592] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300043.765656] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300043.776912] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.788904] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.789024] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.789148] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.828060] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.828371] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.828373] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.828419] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.828544] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.828670] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.828800] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.828968] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.829044] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300043.842051] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300068.980037] cfg80211: Calling CRDA to update world regulatory domain
[300069.033729] cfg80211: World regulatory domain updated:
[300069.033738] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[300069.033745] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300069.033751] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300069.033756] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[300069.033761] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300069.033766] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300070.205833] wlan0: authenticate with 28:be:9b:be:2e:c5
[300070.218435] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[300070.220042] wlan0: authenticated
[300070.221096] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[300070.223541] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[300070.230652] wlan0: associated
[300083.894948] perf samples too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[300127.367683] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300127.367710] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300127.367713] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300127.391333] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300127.391345] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300127.391349] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300127.433721] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300127.455466] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300136.838031] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300136.838077] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300136.838086] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300136.861809] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300136.861869] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300136.861880] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300136.906078] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300136.906209] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300139.632430] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300139.632456] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300139.632459] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[300139.632487] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300139.731731] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300139.773239] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300142.219236] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300142.219274] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300142.219281] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300142.338783] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300151.059363] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300151.059397] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300151.059400] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300151.568700] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300189.099527] cfg80211: Calling CRDA to update world regulatory domain
[300189.105049] cfg80211: World regulatory domain updated:
[300189.105054] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[300189.105057] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300189.105060] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300189.105062] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[300189.105064] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300189.105066] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300190.353396] wlan0: authenticate with 28:be:9b:be:2e:c5
[300190.371836] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[300190.373428] wlan0: authenticated
[300190.375979] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[300190.378506] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[300190.386302] wlan0: associated
[300458.499952] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300458.500017] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300458.500026] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300458.500074] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300458.500083] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300458.500091] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300458.500099] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300458.503463] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300458.503523] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300458.503541] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300458.503566] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300458.503574] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300458.503582] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300458.503590] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300458.503598] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300458.506961] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300458.507014] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300458.507028] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300458.507053] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300458.538456] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300458.637423] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300458.644294] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300458.657895] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300458.687326] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300458.739170] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
[300458.739239] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
[300458.739259] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
[300458.855339] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300458.855402] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300458.855410] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[300458.855455] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300458.899353] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300458.899422] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300458.899441] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300458.945150] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300458.945292] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300458.954669] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300458.954779] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300458.954902] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300458.955042] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300458.955231] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300459.026385] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300459.026552] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300459.026628] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300459.026804] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300459.026875] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300488.246492] cfg80211: Calling CRDA to update world regulatory domain
[300488.250298] cfg80211: World regulatory domain updated:
[300488.250303] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[300488.250306] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300488.250308] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300488.250310] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[300488.250312] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300488.250314] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300503.623299] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[300504.928565] wlan0: authenticate with 28:be:9b:be:2e:c5
[300504.934263] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[300504.938843] wlan0: authenticated
[300504.939124] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[300504.941483] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[300504.949589] wlan0: associated
[300504.949618] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[300513.263574] cfg80211: Calling CRDA to update world regulatory domain
[300513.270125] cfg80211: World regulatory domain updated:
[300513.270135] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[300513.270142] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300513.270147] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300513.270153] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[300513.270157] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300513.270162] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300514.501602] wlan0: authenticate with 28:be:9b:be:2e:c5
[300514.526316] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[300514.567044] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[300514.605433] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[300514.651698] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[300540.936915] wlan0: authenticate with 28:be:9b:be:2e:c5
[300540.956341] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[300540.962352] wlan0: authenticated
[300540.965722] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[300541.011838] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[300541.019936] wlan0: associated
[300550.601747] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=3)
[300550.633658] cfg80211: Calling CRDA to update world regulatory domain
[300550.637494] cfg80211: World regulatory domain updated:
[300550.637498] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[300550.637501] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300550.637502] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300550.637504] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[300550.637505] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300550.637506] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[300553.431309] wlan0: authenticate with 28:be:9b:be:2e:c5
[300553.435527] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[300553.441003] wlan0: authenticated
[300553.446827] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[300553.449251] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[300553.457016] wlan0: associated
[300738.371796] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300738.371824] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300738.371831] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[300738.412703] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300781.310549] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 0
[300781.310626] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 0
[300781.310632] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 0
[300781.318536] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300781.318570] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300781.318579] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[300781.323028] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300781.323055] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300781.323061] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300781.342174] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 0
[300781.342216] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 0
[300781.342226] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 0
[300781.352441] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300781.391049] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300781.391075] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300781.391080] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300781.406813] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300781.406848] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300781.406855] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300781.422571] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300781.422605] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300781.422608] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300781.471072] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300781.471080] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300781.471083] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300781.477845] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300781.616550] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300781.616625] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300781.616758] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300781.616874] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300781.621532] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300781.643040] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300781.874604] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 0
[300781.874632] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 0
[300781.874642] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 0
[300781.887019] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300781.887076] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300781.887079] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300781.887104] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 0
[300781.910763] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300781.910810] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300781.910814] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[300781.910838] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300781.926615] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300781.926652] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300781.926659] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[300781.942598] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300781.942644] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300781.942655] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300781.944876] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300781.967635] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300781.991415] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300782.040673] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300782.040790] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300782.040906] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300782.041029] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300795.958294] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
[300795.958321] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
[300795.958324] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
[300795.973305] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300797.895610] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300797.895636] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300797.895640] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[300798.301142] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300798.775193] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300798.775216] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300798.775219] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
[300798.775247] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[300798.792683] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[300798.924372] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300838.355807] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300838.355821] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300838.355824] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[300838.355835] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[300838.355838] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[300838.355841] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300838.355845] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[300838.355847] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[300838.355850] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
[300838.399100] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300838.399372] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300838.399378] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300838.399439] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300838.399563] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300838.399792] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300838.399817] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300843.279001] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300843.279088] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300843.279099] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[300843.369408] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[300848.053123] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300848.053163] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300848.053170] ieee80211 phy18: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[300848.171173] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[301368.591085] ieee80211 phy18: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced forced reset
[301368.609588] ieee80211 phy18: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[302136.829624] usb 2-3: USB disconnect, device number 22
[302138.434158] ieee80211 phy18: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[302138.462186] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=3)
[302138.554866] cfg80211: Calling CRDA to update world regulatory domain
[302138.679822] cfg80211: World regulatory domain updated:
[302138.679827] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[302138.679829] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302138.679830] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302138.679832] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[302138.679833] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302138.679834] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302138.850360] usb 2-3: new high-speed USB device number 23 using ehci-pci
[302139.000364] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[302139.000371] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[302139.000374] usb 2-3: Product: 802.11 n WLAN
[302139.000377] usb 2-3: Manufacturer: Ralink
[302139.000379] usb 2-3: SerialNumber: 1.0
[302139.114586] usb 2-3: reset high-speed USB device number 23 using ehci-pci
[302139.257334] ieee80211 phy19: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[302139.287826] ieee80211 phy19: rt2x00_set_rf: Info - RF chipset 5370 detected
[302139.288255] ieee80211 phy19: Selected rate control algorithm 'minstrel_ht'
[302139.453038] ieee80211 phy19: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[302139.468340] ieee80211 phy19: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[302139.721053] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302139.721388] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302140.957161] wlan0: authenticate with 28:be:9b:be:2e:c5
[302140.976367] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[302140.979594] wlan0: authenticated
[302140.983517] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[302140.986083] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[302140.993333] wlan0: associated
[302140.993364] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[302168.724076] usb 2-3: USB disconnect, device number 23
[302170.323504] ieee80211 phy19: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[302170.331587] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=3)
[302170.440446] cfg80211: Calling CRDA to update world regulatory domain
[302170.496111] cfg80211: World regulatory domain updated:
[302170.496117] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[302170.496119] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302170.496120] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302170.496121] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[302170.496122] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302170.496124] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302170.735961] usb 2-3: new high-speed USB device number 24 using ehci-pci
[302170.885804] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[302170.885809] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[302170.885811] usb 2-3: Product: 802.11 n WLAN
[302170.885813] usb 2-3: Manufacturer: Ralink
[302170.885814] usb 2-3: SerialNumber: 1.0
[302171.000263] usb 2-3: reset high-speed USB device number 24 using ehci-pci
[302171.143468] ieee80211 phy20: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[302171.174911] ieee80211 phy20: rt2x00_set_rf: Info - RF chipset 5370 detected
[302171.175472] ieee80211 phy20: Selected rate control algorithm 'minstrel_ht'
[302171.211596] ieee80211 phy20: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[302171.211625] ieee80211 phy20: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[302171.451138] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302171.451701] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302188.614189] usb 2-3: USB disconnect, device number 24
[302190.215733] ieee80211 phy20: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[302197.467147] usb 2-3: new high-speed USB device number 25 using ehci-pci
[302198.003655] usb 2-3: device not accepting address 25, error -71
[302198.388111] usb 5-3: new full-speed USB device number 4 using ohci-pci
[302198.550073] usb 5-3: not running at top speed; connect to a high speed hub
[302198.575412] usb 5-3: New USB device found, idVendor=148f, idProduct=5370
[302198.575421] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[302198.575424] usb 5-3: Product: 802.11 n WLAN
[302198.575427] usb 5-3: Manufacturer: Ralink
[302198.575428] usb 5-3: SerialNumber: 1.0
[302198.720426] usb 5-3: reset full-speed USB device number 4 using ohci-pci
[302198.895255] ieee80211 phy21: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[302199.345484] ieee80211 phy21: rt2x00_set_rf: Info - RF chipset 5370 detected
[302199.349879] ieee80211 phy21: Selected rate control algorithm 'minstrel_ht'
[302199.379537] ieee80211 phy21: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[302199.379571] ieee80211 phy21: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[302200.123069] usb 5-3: USB disconnect, device number 4
[302200.124088] ieee80211 phy21: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x6220 with error -19
[302200.148488] ieee80211 phy21: rt2800_wait_bbp_ready: Error - BBP register access failed, aborting
[302200.148507] ieee80211 phy21: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)
[302200.150101] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302200.498265] usb 2-3: new high-speed USB device number 27 using ehci-pci
[302200.648182] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[302200.648186] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[302200.648188] usb 2-3: Product: 802.11 n WLAN
[302200.648190] usb 2-3: Manufacturer: Ralink
[302200.648191] usb 2-3: SerialNumber: 1.0
[302200.762568] usb 2-3: reset high-speed USB device number 27 using ehci-pci
[302200.905375] ieee80211 phy22: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[302200.939137] ieee80211 phy22: rt2x00_set_rf: Info - RF chipset 5370 detected
[302200.939522] ieee80211 phy22: Selected rate control algorithm 'minstrel_ht'
[302200.959258] ieee80211 phy22: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[302200.959293] ieee80211 phy22: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[302201.213098] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302201.213409] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302202.641801] usb 2-3: USB disconnect, device number 27
[302202.752636] ieee80211 phy22: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
[302202.752642] ieee80211 phy22: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
[302203.441747] wlan0: authenticate with 28:be:9b:be:2e:c5
[302203.441795] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[302204.065929] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[302204.374150] ieee80211 phy22: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[302204.798647] usb 2-3: new high-speed USB device number 28 using ehci-pci
[302204.948390] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[302204.948395] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[302204.948397] usb 2-3: Product: 802.11 n WLAN
[302204.948399] usb 2-3: Manufacturer: Ralink
[302204.948400] usb 2-3: SerialNumber: 1.0
[302205.062920] usb 2-3: reset high-speed USB device number 28 using ehci-pci
[302205.599396] usb 2-3: device not accepting address 28, error -71
[302205.655625] ieee80211 phy23: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[302205.655635] ieee80211 phy23: rt2800_probe_rt: Error - Invalid RT chipset 0xffff, rev 8801 detected
[302205.655638] ieee80211 phy23: rt2x00lib_probe_dev: Error - Failed to allocate device
[302205.655869] usb 2-3: USB disconnect, device number 28
[302205.895729] usb 2-3: new high-speed USB device number 29 using ehci-pci
[302206.045686] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[302206.045696] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[302206.045699] usb 2-3: Product: 802.11 n WLAN
[302206.045701] usb 2-3: Manufacturer: Ralink
[302206.045702] usb 2-3: SerialNumber: 1.0
[302206.164101] usb 2-3: reset high-speed USB device number 29 using ehci-pci
[302206.306728] ieee80211 phy24: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[302206.338383] ieee80211 phy24: rt2x00_set_rf: Info - RF chipset 5370 detected
[302206.338821] ieee80211 phy24: Selected rate control algorithm 'minstrel_ht'
[302206.368905] ieee80211 phy24: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[302206.368932] ieee80211 phy24: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[302206.627130] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302206.627694] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302206.711002] ieee80211 phy24: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[302209.039860] wlan0: authenticate with 28:be:9b:be:2e:c5
[302209.068128] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[302209.069785] wlan0: authenticated
[302209.071067] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[302209.073536] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[302209.081653] wlan0: associated
[302209.081693] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[302209.092199] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=2)
[302209.134611] wlan0: authenticate with 28:be:9b:be:2e:c5
[302209.137850] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[302209.138921] cfg80211: Calling CRDA to update world regulatory domain
[302209.139419] wlan0: authenticated
[302209.142726] cfg80211: World regulatory domain updated:
[302209.142731] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[302209.142734] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302209.142736] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302209.142738] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[302209.142740] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302209.142742] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302209.143225] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[302209.145666] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[302209.152659] wlan0: associated
[302562.752379] usb 2-3: USB disconnect, device number 29
[302564.352739] ieee80211 phy24: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[302564.372805] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=3)
[302564.473295] cfg80211: Calling CRDA to update world regulatory domain
[302564.491855] cfg80211: World regulatory domain updated:
[302564.491861] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[302564.491863] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302564.491864] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302564.491865] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[302564.491867] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302564.491868] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302564.764989] usb 2-3: new high-speed USB device number 30 using ehci-pci
[302564.915120] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[302564.915133] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[302564.915141] usb 2-3: Product: 802.11 n WLAN
[302564.915146] usb 2-3: Manufacturer: Ralink
[302564.915151] usb 2-3: SerialNumber: 1.0
[302565.029114] usb 2-3: reset high-speed USB device number 30 using ehci-pci
[302565.172029] ieee80211 phy25: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[302565.202671] ieee80211 phy25: rt2x00_set_rf: Info - RF chipset 5370 detected
[302565.203099] ieee80211 phy25: Selected rate control algorithm 'minstrel_ht'
[302565.218922] ieee80211 phy25: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[302565.218948] ieee80211 phy25: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[302565.467241] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302565.467657] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302567.862971] wlan0: authenticate with 28:be:9b:be:2e:c5
[302567.891610] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[302567.944831] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[302567.967642] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[302568.003715] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[302569.284673] wlan0: authenticate with 28:be:9b:be:2e:c5
[302569.301746] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[302569.305325] wlan0: authenticated
[302569.307440] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[302569.309851] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[302569.317202] wlan0: associated
[302569.317239] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[302791.446100] cfg80211: Calling CRDA to update world regulatory domain
[302791.453512] cfg80211: World regulatory domain updated:
[302791.453523] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[302791.453530] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302791.453536] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302791.453541] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[302791.453546] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302791.453550] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302792.700786] wlan0: authenticate with 28:be:9b:be:2e:c5
[302792.715335] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[302792.814656] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[302792.871862] wlan0: authenticated
[302792.874191] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[302792.927133] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[302792.934437] wlan0: associated
[302796.456954] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[302796.457019] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[302796.457034] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[302796.546379] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[302838.482547] cfg80211: Calling CRDA to update world regulatory domain
[302838.488389] cfg80211: World regulatory domain updated:
[302838.488395] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[302838.488398] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302838.488400] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302838.488402] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[302838.488404] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302838.488406] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302853.870781] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302855.089674] wlan0: authenticate with 28:be:9b:be:2e:c5
[302855.093182] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[302855.294537] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[302855.298992] wlan0: authenticated
[302855.302506] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[302855.305093] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[302855.312572] wlan0: associated
[302855.312609] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[302859.500726] cfg80211: Calling CRDA to update world regulatory domain
[302859.503658] cfg80211: World regulatory domain updated:
[302859.503662] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[302859.503664] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302859.503666] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302859.503667] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[302859.503668] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302859.503670] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[302860.747086] wlan0: authenticate with 28:be:9b:be:2e:c5
[302860.762475] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[302860.804247] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[302860.835968] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[302860.873410] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[302874.883645] wlan0: authenticate with 28:be:9b:be:2e:c5
[302874.899383] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[302875.100800] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[302875.304916] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[302875.508999] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[302901.833179] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[302904.668959] wlan0: authenticate with 28:be:9b:be:2e:c5
[302904.673022] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[302904.876215] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[302905.080353] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[302905.284463] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[302917.636372] wlan0: authenticate with 28:be:9b:be:2e:c5
[302917.661197] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[302917.862998] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[302918.067060] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[302918.271147] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[302932.690675] wlan0: authenticate with 28:be:9b:be:2e:c5
[302932.694061] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[302932.894762] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[302933.098880] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[302933.303049] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[302944.506849] wlan0: authenticate with 28:be:9b:be:2e:c5
[302944.522043] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[302944.523710] wlan0: authenticated
[302944.524836] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[302944.527333] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=6)
[302944.534759] wlan0: associated
[302944.534810] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[303595.907183] cfg80211: Calling CRDA to update world regulatory domain
[303595.911039] cfg80211: World regulatory domain updated:
[303595.911044] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[303595.911047] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[303595.911049] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[303595.911051] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[303595.911062] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[303595.911068] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[303597.125207] wlan0: authenticate with 28:be:9b:be:2e:c5
[303597.140917] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[303597.143613] wlan0: authenticated
[303597.147704] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[303597.150167] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=6)
[303597.157799] wlan0: associated
[303935.051261] cfg80211: Calling CRDA to update world regulatory domain
[303935.056801] cfg80211: World regulatory domain updated:
[303935.056806] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[303935.056809] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[303935.056812] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[303935.056814] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[303935.056816] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[303935.056818] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[303950.423567] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[303978.434070] wlan0: authenticate with 28:be:9b:be:2e:c5
[303978.438295] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[303978.641653] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[303978.643484] wlan0: authenticated
[303978.645709] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[303978.649280] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=6)
[303978.658354] wlan0: associated
[303978.659210] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[304056.948282] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[304056.948351] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[304056.948370] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
[304056.948394] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
[304057.046235] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304057.046298] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304057.688439] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304057.688505] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304057.688513] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304057.688566] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[304057.688575] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[304057.734995] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304057.784745] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304057.798592] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304059.425172] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[304059.425194] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[304059.425197] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
[304059.425211] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[304059.425223] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304059.437558] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[304059.437596] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[304059.437599] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[304059.535346] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304059.535456] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304059.560398] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304059.629292] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304342.796808] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[304342.796850] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[304342.796859] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
[304342.884856] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304342.884919] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304342.884927] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304342.892864] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[304342.892922] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[304342.892934] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[304342.892954] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[304342.896220] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[304342.896249] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[304342.896256] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[304342.986016] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304342.986162] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304343.082555] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304343.082666] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304343.082802] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304343.897471] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[304343.897537] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[304343.897554] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[304343.900978] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304343.901046] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304343.901056] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304344.083077] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304344.128321] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304344.333516] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[304344.333584] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[304344.333592] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[304344.511353] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304347.535653] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[304347.535689] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[304347.535695] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
[304347.535718] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
[304347.708850] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304347.753756] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304470.474489] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[304470.474522] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[304470.474524] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[304470.474539] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
[304470.474542] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
[304470.474545] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
[304470.586665] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304470.599155] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
[304470.599189] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
[304470.599191] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
[304470.746107] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304470.746227] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304470.746352] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304470.746576] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
[304487.096069] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[304487.096109] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[304487.096116] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
[304487.165717] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304487.415823] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304487.415863] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304487.415866] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
[304487.415880] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
[304487.415902] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
[304487.419355] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
[304487.419364] ieee80211 phy25: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
[304487.465619] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304487.465735] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304487.465870] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304487.465951] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[304487.479252] ieee80211 phy25: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
[305283.248332] init: smbd pre-start process (21910) terminated with status 64
[306292.267732] cfg80211: Calling CRDA to update world regulatory domain
[306292.274412] cfg80211: World regulatory domain updated:
[306292.274423] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[306292.274430] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[306292.274436] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[306292.274441] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[306292.274446] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[306292.274451] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[306307.655853] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[306308.979950] wlan0: authenticate with 28:be:9b:be:2e:c5
[306308.983901] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[306309.184356] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[306309.388435] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[306309.592527] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[306311.326241] wlan0: authenticate with 28:be:9b:be:2e:c5
[306311.345927] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[306311.549569] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[306311.753635] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[306311.957737] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[306320.326626] wlan0: authenticate with 28:be:9b:be:2e:c5
[306320.339615] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[306320.542235] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[306320.746346] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[306320.950570] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[306333.305364] wlan0: authenticate with 28:be:9b:be:2e:c5
[306333.318063] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[306333.319772] wlan0: authenticated
[306333.320944] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[306333.326914] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=6)
[306333.333901] wlan0: associated
[306333.333938] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[307318.880460] cfg80211: Calling CRDA to update world regulatory domain
[307318.885996] cfg80211: World regulatory domain updated:
[307318.886000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[307318.886003] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[307318.886006] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[307318.886008] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[307318.886010] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[307318.886012] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[307334.238551] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[307438.270531] wlan0: authenticate with 28:be:9b:be:2e:c5
[307438.274336] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[307438.292840] wlan0: authenticated
[307438.294196] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[307438.296946] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[307438.305465] wlan0: associated
[307438.305508] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[307937.255403] cfg80211: Calling CRDA to update world regulatory domain
[307937.260790] cfg80211: World regulatory domain updated:
[307937.260795] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[307937.260798] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[307937.260801] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[307937.260803] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[307937.260805] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[307937.260807] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[307944.652836] wlan0: authenticate with 28:be:9b:be:2e:c5
[307944.691619] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[307944.895092] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[307944.896709] wlan0: authenticated
[307944.899101] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[307944.903134] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[307944.912727] wlan0: associated
[308102.332913] cfg80211: Calling CRDA to update world regulatory domain
[308102.340972] cfg80211: World regulatory domain updated:
[308102.340982] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[308102.340989] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[308102.340996] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[308102.341001] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[308102.341006] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[308102.341010] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[308117.631290] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[308145.617745] wlan0: authenticate with 28:be:9b:be:2e:c5
[308145.621039] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[308145.622947] wlan0: authenticated
[308145.623343] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[308145.625768] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[308145.633750] wlan0: associated
[308145.633788] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[308549.632846] cfg80211: Calling CRDA to update world regulatory domain
[308549.640225] cfg80211: World regulatory domain updated:
[308549.640234] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[308549.640242] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[308549.640248] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[308549.640253] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[308549.640258] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[308549.640263] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[308550.850287] wlan0: authenticate with 28:be:9b:be:2e:c5
[308550.862473] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[308550.873829] wlan0: authenticated
[308550.877308] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[308550.886404] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[308550.894329] wlan0: associated
[309145.834191] cfg80211: Calling CRDA to update world regulatory domain
[309145.839764] cfg80211: World regulatory domain updated:
[309145.839769] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[309145.839772] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[309145.839775] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[309145.839777] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[309145.839779] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[309145.839780] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[309161.207562] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[309507.363844] wlan0: authenticate with 28:be:9b:be:2e:c5
[309507.368951] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[309507.379418] wlan0: authenticated
[309507.381511] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[309507.394470] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[309507.401326] wlan0: associated
[309507.401371] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[310727.568141] usb 2-3: USB disconnect, device number 30
[310729.140285] cfg80211: Calling CRDA to update world regulatory domain
[310729.145726] cfg80211: World regulatory domain updated:
[310729.145731] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[310729.145734] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[310729.145737] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[310729.145739] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[310729.145741] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[310729.145743] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[310729.184035] ieee80211 phy25: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[310729.492217] usb 2-3: new high-speed USB device number 31 using ehci-pci
[310729.646396] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[310729.646408] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[310729.646415] usb 2-3: Product: 802.11 n WLAN
[310729.646421] usb 2-3: Manufacturer: Ralink
[310729.646425] usb 2-3: SerialNumber: 1.0
[310729.760390] usb 2-3: reset high-speed USB device number 31 using ehci-pci
[310729.903234] ieee80211 phy26: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[310729.931471] ieee80211 phy26: rt2x00_set_rf: Info - RF chipset 5370 detected
[310729.931895] ieee80211 phy26: Selected rate control algorithm 'minstrel_ht'
[310729.948161] ieee80211 phy26: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[310729.948185] ieee80211 phy26: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[310730.198386] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[310730.198797] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[310788.030016] wlan0: authenticate with 28:be:9b:be:2e:c5
[310788.055569] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[310788.258658] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[310788.262798] wlan0: authenticated
[310788.266831] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[310788.269296] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[310788.277208] wlan0: associated
[310788.277239] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[311297.996636] cfg80211: Calling CRDA to update world regulatory domain
[311298.001883] cfg80211: World regulatory domain updated:
[311298.001888] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[311298.001891] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[311298.001893] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[311298.001895] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[311298.001897] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[311298.001899] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[311305.369720] wlan0: authenticate with 28:be:9b:be:2e:c5
[311305.395066] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[311305.396957] wlan0: authenticated
[311305.400354] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[311305.404355] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[311305.411309] wlan0: associated
[312604.766678] cfg80211: Calling CRDA to update world regulatory domain
[312604.772122] cfg80211: World regulatory domain updated:
[312604.772127] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[312604.772130] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[312604.772132] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[312604.772134] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[312604.772136] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[312604.772138] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[312606.020642] wlan0: authenticate with 28:be:9b:be:2e:c5
[312606.044263] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[312606.045994] wlan0: authenticated
[312606.047135] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[312606.049583] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[312606.057016] wlan0: associated
[313865.396574] cfg80211: Calling CRDA to update world regulatory domain
[313865.401744] cfg80211: World regulatory domain updated:
[313865.401749] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[313865.401752] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[313865.401754] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[313865.401756] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[313865.401758] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[313865.401760] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[313866.634280] wlan0: authenticate with 28:be:9b:be:2e:c5
[313866.646451] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[313866.648082] wlan0: authenticated
[313866.649148] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[313866.651572] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[313866.658714] wlan0: associated
[314285.638728] cfg80211: Calling CRDA to update world regulatory domain
[314285.645949] cfg80211: World regulatory domain updated:
[314285.645954] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[314285.645956] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[314285.645958] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[314285.645960] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[314285.645961] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[314285.645962] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[314286.891553] wlan0: authenticate with 28:be:9b:be:2e:c5
[314286.904185] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[314286.905784] wlan0: authenticated
[314286.907186] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[314286.909704] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[314286.917022] wlan0: associated
[314481.656390] cfg80211: Calling CRDA to update world regulatory domain
[314481.664310] cfg80211: World regulatory domain updated:
[314481.664320] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[314481.664327] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[314481.664333] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[314481.664338] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[314481.664343] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[314481.664348] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[314497.021615] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[314717.082561] wlan0: authenticate with 28:be:9b:be:2e:c5
[314717.085729] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[314717.087600] wlan0: authenticated
[314717.090311] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[314717.092810] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[314717.099711] wlan0: associated
[314717.099746] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[315007.021093] cfg80211: Calling CRDA to update world regulatory domain
[315007.026642] cfg80211: World regulatory domain updated:
[315007.026647] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[315007.026650] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[315007.026652] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[315007.026654] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[315007.026656] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[315007.026658] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[315022.392188] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[315050.339921] wlan0: authenticate with 28:be:9b:be:2e:c5
[315050.361158] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[315050.563367] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[315050.569370] wlan0: authenticated
[315050.571430] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[315050.573852] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[315050.585651] wlan0: associated
[315050.585678] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[315966.560752] cfg80211: Calling CRDA to update world regulatory domain
[315966.566269] cfg80211: World regulatory domain updated:
[315966.566274] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[315966.566277] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[315966.566280] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[315966.566282] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[315966.566284] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[315966.566285] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[315967.814393] wlan0: authenticate with 28:be:9b:be:2e:c5
[315967.838382] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[315967.839985] wlan0: authenticated
[315967.841202] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[315967.843587] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[315967.850846] wlan0: associated
[316506.808927] cfg80211: Calling CRDA to update world regulatory domain
[316506.812391] cfg80211: World regulatory domain updated:
[316506.812396] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[316506.812399] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316506.812401] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316506.812403] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[316506.812405] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316506.812407] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316508.070872] wlan0: authenticate with 28:be:9b:be:2e:c5
[316508.082998] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[316508.115694] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[316508.147328] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[316508.183462] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[316509.823839] wlan0: authenticate with 28:be:9b:be:2e:c5
[316509.847766] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[316509.854674] wlan0: authenticated
[316509.858369] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[316509.865343] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[316509.873841] wlan0: associated
[316686.923570] cfg80211: Calling CRDA to update world regulatory domain
[316686.930491] cfg80211: World regulatory domain updated:
[316686.930495] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[316686.930498] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316686.930500] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316686.930501] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[316686.930502] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316686.930504] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316688.184672] wlan0: authenticate with 28:be:9b:be:2e:c5
[316688.207939] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[316688.209572] wlan0: authenticated
[316688.210901] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[316688.213475] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[316688.220827] wlan0: associated
[316927.055035] cfg80211: Calling CRDA to update world regulatory domain
[316927.061889] cfg80211: World regulatory domain updated:
[316927.061899] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[316927.061906] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316927.061912] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316927.061918] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[316927.061922] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316927.061927] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[316928.268666] wlan0: authenticate with 28:be:9b:be:2e:c5
[316928.292465] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[316928.294194] wlan0: authenticated
[316928.295443] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[316928.299946] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[316928.309870] wlan0: associated
[317407.300170] cfg80211: Calling CRDA to update world regulatory domain
[317407.307192] cfg80211: World regulatory domain updated:
[317407.307202] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[317407.307209] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317407.307215] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317407.307220] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[317407.307224] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317407.307229] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317408.546178] wlan0: authenticate with 28:be:9b:be:2e:c5
[317408.569651] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[317408.572162] wlan0: authenticated
[317408.572601] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[317408.575000] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[317408.585175] wlan0: associated
[317587.377543] cfg80211: Calling CRDA to update world regulatory domain
[317587.385762] cfg80211: World regulatory domain updated:
[317587.385771] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[317587.385773] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317587.385774] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317587.385776] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[317587.385777] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317587.385778] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317588.623343] wlan0: authenticate with 28:be:9b:be:2e:c5
[317588.635481] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[317588.637136] wlan0: authenticated
[317588.638030] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[317588.641559] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[317588.648620] wlan0: associated
[317670.340865] cfg80211: Calling CRDA to update world regulatory domain
[317670.347350] cfg80211: World regulatory domain updated:
[317670.347359] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[317670.347366] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317670.347373] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317670.347378] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[317670.347382] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317670.347387] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[317671.598462] wlan0: authenticate with 28:be:9b:be:2e:c5
[317671.626453] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[317671.658093] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[317671.694236] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[317671.721369] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[317685.724531] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[317789.774700] wlan0: authenticate with 28:be:9b:be:2e:c5
[317789.777874] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[317789.779589] wlan0: authenticated
[317789.782429] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[317789.784855] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[317789.797770] wlan0: associated
[317789.797795] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[318427.910553] cfg80211: Calling CRDA to update world regulatory domain
[318427.917351] cfg80211: World regulatory domain updated:
[318427.917361] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[318427.917370] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318427.917376] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318427.917382] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[318427.917387] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318427.917392] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318435.286918] wlan0: authenticate with 28:be:9b:be:2e:c5
[318435.299292] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[318435.319057] wlan0: authenticated
[318435.322154] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[318435.324676] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[318435.335538] wlan0: associated
[318487.905704] cfg80211: Calling CRDA to update world regulatory domain
[318487.912647] cfg80211: World regulatory domain updated:
[318487.912657] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[318487.912664] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318487.912671] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318487.912676] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[318487.912681] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318487.912685] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318489.152188] wlan0: authenticate with 28:be:9b:be:2e:c5
[318489.168748] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[318489.170338] wlan0: authenticated
[318489.174482] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[318489.176865] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[318489.190835] wlan0: associated
[318740.024484] cfg80211: Calling CRDA to update world regulatory domain
[318740.032996] cfg80211: World regulatory domain updated:
[318740.033010] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[318740.033017] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318740.033024] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318740.033029] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[318740.033034] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318740.033038] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[318741.250262] wlan0: authenticate with 28:be:9b:be:2e:c5
[318741.273941] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[318741.350624] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[318741.375496] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[318741.417255] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[318743.066499] wlan0: authenticate with 28:be:9b:be:2e:c5
[318743.080428] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[318743.281904] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[318743.486024] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[318743.690128] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[318755.374181] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[318859.393188] wlan0: authenticate with 28:be:9b:be:2e:c5
[318859.396365] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[318859.399180] wlan0: authenticated
[318859.402119] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[318859.407418] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[318859.414327] wlan0: associated
[318859.414357] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[321549.441099] cfg80211: Calling CRDA to update world regulatory domain
[321549.449093] cfg80211: World regulatory domain updated:
[321549.449102] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[321549.449110] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[321549.449116] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[321549.449121] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[321549.449126] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[321549.449130] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[321550.687033] wlan0: authenticate with 28:be:9b:be:2e:c5
[321550.720179] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[321550.722157] wlan0: authenticated
[321550.725488] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[321550.727907] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[321550.734915] wlan0: associated
[321985.671418] cfg80211: Calling CRDA to update world regulatory domain
[321985.679386] cfg80211: World regulatory domain updated:
[321985.679396] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[321985.679403] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[321985.679409] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[321985.679414] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[321985.679419] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[321985.679423] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[321986.901279] wlan0: authenticate with 28:be:9b:be:2e:c5
[321986.922968] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[321986.927190] wlan0: authenticated
[321986.927780] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[321986.930173] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[321986.944933] wlan0: associated
[323230.313127] cfg80211: Calling CRDA to update world regulatory domain
[323230.318569] cfg80211: World regulatory domain updated:
[323230.318574] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[323230.318577] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[323230.318580] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[323230.318582] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[323230.318584] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[323230.318586] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[323231.566635] wlan0: authenticate with 28:be:9b:be:2e:c5
[323231.578622] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[323231.619238] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[323231.648711] wlan0: authenticated
[323231.649616] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[323231.652156] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[323231.659738] wlan0: associated
[325452.470013] cfg80211: Calling CRDA to update world regulatory domain
[325452.475875] cfg80211: World regulatory domain updated:
[325452.475881] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[325452.475883] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[325452.475886] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[325452.475888] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[325452.475890] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[325452.475892] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[325453.720465] wlan0: authenticate with 28:be:9b:be:2e:c5
[325453.735475] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[325453.760358] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[325453.797627] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[325453.869784] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[325467.833566] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[325624.891266] wlan0: authenticate with 28:be:9b:be:2e:c5
[325624.896814] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[325624.899281] wlan0: authenticated
[325624.903161] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[325624.905528] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[325624.912400] wlan0: associated
[325624.912431] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[325852.775842] cfg80211: Calling CRDA to update world regulatory domain
[325852.781367] cfg80211: World regulatory domain updated:
[325852.781372] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[325852.781375] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[325852.781377] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[325852.781379] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[325852.781381] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[325852.781383] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[325868.151192] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[325896.192454] wlan0: authenticate with 28:be:9b:be:2e:c5
[325896.196280] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[325896.400087] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[325896.604295] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[325896.808502] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[325898.499927] wlan0: authenticate with 28:be:9b:be:2e:c5
[325898.515581] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[325898.525637] wlan0: authenticated
[325898.526242] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[325898.534175] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[325898.541652] wlan0: associated
[325898.541677] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[326079.913951] cfg80211: Calling CRDA to update world regulatory domain
[326079.919426] cfg80211: World regulatory domain updated:
[326079.919431] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[326079.919434] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[326079.919437] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[326079.919439] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[326079.919441] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[326079.919442] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[326095.285104] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[326252.371746] wlan0: authenticate with 28:be:9b:be:2e:c5
[326252.375515] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[326252.579334] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[326252.581082] wlan0: authenticated
[326252.583283] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[326252.585837] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[326252.594070] wlan0: associated
[326252.594137] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[326464.117973] cfg80211: Calling CRDA to update world regulatory domain
[326464.123511] cfg80211: World regulatory domain updated:
[326464.123516] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[326464.123519] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[326464.123521] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[326464.123523] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[326464.123525] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[326464.123527] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[326479.473227] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[326699.579437] wlan0: authenticate with 28:be:9b:be:2e:c5
[326699.582776] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[326699.784002] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[326699.988112] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[326700.192235] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[326734.768856] wlan0: authenticate with 28:be:9b:be:2e:c5
[326734.785313] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[326734.986220] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[326735.190314] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[326735.394456] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[327081.771359] wlan0: authenticate with 28:be:9b:be:2e:c5
[327081.783409] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[327081.785147] wlan0: authenticated
[327081.786170] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[327081.788602] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[327081.795743] wlan0: associated
[327081.795804] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[327186.531960] cfg80211: Calling CRDA to update world regulatory domain
[327186.538819] cfg80211: World regulatory domain updated:
[327186.538828] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[327186.538835] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327186.538841] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327186.538846] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[327186.538851] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327186.538856] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327187.757848] wlan0: authenticate with 28:be:9b:be:2e:c5
[327187.770010] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[327187.802775] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[327187.858018] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[327187.888574] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[327201.909950] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[327262.946293] wlan0: authenticate with 28:be:9b:be:2e:c5
[327262.952934] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[327262.991424] wlan0: authenticated
[327262.991898] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[327262.994294] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[327263.001555] wlan0: associated
[327263.001589] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[327291.569735] cfg80211: Calling CRDA to update world regulatory domain
[327291.577894] cfg80211: World regulatory domain updated:
[327291.577904] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[327291.577911] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327291.577917] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327291.577922] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[327291.577926] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327291.577931] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327292.806668] wlan0: authenticate with 28:be:9b:be:2e:c5
[327292.818764] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[327292.878393] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[327292.913437] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[327292.941676] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[327300.734746] wlan0: authenticate with 28:be:9b:be:2e:c5
[327300.746997] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[327300.749900] wlan0: authenticated
[327300.753746] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[327300.756141] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[327300.763136] wlan0: associated
[327635.298830] usb 2-3: USB disconnect, device number 31
[327636.217717] cfg80211: Calling CRDA to update world regulatory domain
[327636.223043] cfg80211: World regulatory domain updated:
[327636.223048] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[327636.223051] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327636.223054] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327636.223056] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[327636.223058] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327636.223060] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327636.913787] ieee80211 phy26: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[327637.241905] usb 2-3: new high-speed USB device number 32 using ehci-pci
[327637.392063] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[327637.392075] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[327637.392082] usb 2-3: Product: 802.11 n WLAN
[327637.392088] usb 2-3: Manufacturer: Ralink
[327637.392093] usb 2-3: SerialNumber: 1.0
[327637.510237] usb 2-3: reset high-speed USB device number 32 using ehci-pci
[327637.652902] ieee80211 phy27: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[327637.681024] ieee80211 phy27: rt2x00_set_rf: Info - RF chipset 5370 detected
[327637.681746] ieee80211 phy27: Selected rate control algorithm 'minstrel_ht'
[327637.699946] ieee80211 phy27: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[327637.699980] ieee80211 phy27: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[327637.952199] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[327637.953583] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[327695.090402] wlan0: authenticate with 28:be:9b:be:2e:c5
[327695.121722] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[327695.123443] wlan0: authenticated
[327695.123916] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[327695.126350] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=3)
[327695.133719] wlan0: associated
[327695.133763] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[327755.834744] cfg80211: Calling CRDA to update world regulatory domain
[327755.840628] cfg80211: World regulatory domain updated:
[327755.840634] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[327755.840637] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327755.840640] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327755.840642] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[327755.840644] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327755.840646] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327757.060507] wlan0: authenticate with 28:be:9b:be:2e:c5
[327757.084211] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[327757.116974] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[327757.138506] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[327757.180270] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[327764.999952] wlan0: authenticate with 28:be:9b:be:2e:c5
[327765.012365] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[327765.014372] wlan0: authenticated
[327765.015321] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[327765.017877] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[327765.025617] wlan0: associated
[327821.848979] cfg80211: Calling CRDA to update world regulatory domain
[327821.856230] cfg80211: World regulatory domain updated:
[327821.856240] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[327821.856247] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327821.856253] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327821.856258] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[327821.856263] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327821.856267] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327835.474557] wlan0: authenticate with 28:be:9b:be:2e:c5
[327835.489584] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[327835.498180] wlan0: authenticated
[327835.499854] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[327835.507887] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[327835.518844] wlan0: associated
[327909.914657] cfg80211: Calling CRDA to update world regulatory domain
[327909.922623] cfg80211: World regulatory domain updated:
[327909.922633] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[327909.922640] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327909.922646] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327909.922651] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[327909.922656] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327909.922661] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[327925.269741] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[327953.253736] wlan0: authenticate with 28:be:9b:be:2e:c5
[327953.262335] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[327953.465121] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[327953.669169] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[327953.873255] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[328016.454210] wlan0: authenticate with 28:be:9b:be:2e:c5
[328016.467947] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[328016.482738] wlan0: authenticated
[328016.485756] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[328016.488869] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[328016.496169] wlan0: associated
[328016.496193] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[329353.655631] cfg80211: Calling CRDA to update world regulatory domain
[329353.659064] cfg80211: World regulatory domain updated:
[329353.659069] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[329353.659071] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[329353.659074] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[329353.659076] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[329353.659078] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[329353.659080] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[329369.029907] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[329397.019995] wlan0: authenticate with 28:be:9b:be:2e:c5
[329397.023364] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[329397.226098] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[329397.430231] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[329397.634660] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[329886.248022] wlan0: authenticate with 28:be:9b:be:2e:c5
[329886.251194] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[329886.277491] wlan0: authenticated
[329886.280000] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[329886.282440] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[329886.289687] wlan0: associated
[329886.289716] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[329989.026526] cfg80211: Calling CRDA to update world regulatory domain
[329989.034452] cfg80211: World regulatory domain updated:
[329989.034462] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[329989.034469] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[329989.034475] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[329989.034480] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[329989.034485] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[329989.034489] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[330004.398997] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[330476.623697] wlan0: authenticate with 28:be:9b:be:2e:c5
[330476.626848] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[330476.827477] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[330477.031599] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[330477.041641] wlan0: authenticated
[330477.043580] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[330477.081594] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[330477.093066] wlan0: associated
[330477.093092] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[330826.460334] cfg80211: Calling CRDA to update world regulatory domain
[330826.465815] cfg80211: World regulatory domain updated:
[330826.465820] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[330826.465823] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[330826.465825] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[330826.465827] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[330826.465829] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[330826.465831] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[330833.801291] wlan0: authenticate with 28:be:9b:be:2e:c5
[330833.825144] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[330833.826952] wlan0: authenticated
[330833.827945] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[330833.830465] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[330833.837669] wlan0: associated
[331066.640980] cfg80211: Calling CRDA to update world regulatory domain
[331066.646383] cfg80211: World regulatory domain updated:
[331066.646389] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[331066.646392] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[331066.646395] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[331066.646397] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[331066.646399] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[331066.646400] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[331067.909711] wlan0: authenticate with 28:be:9b:be:2e:c5
[331067.924359] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[331067.942260] wlan0: authenticated
[331067.945399] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[331067.961561] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[331067.969763] wlan0: associated
[331128.617057] cfg80211: Calling CRDA to update world regulatory domain
[331128.624359] cfg80211: World regulatory domain updated:
[331128.624368] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[331128.624375] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[331128.624381] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[331128.624386] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[331128.624391] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[331128.624395] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[331143.983854] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[331364.036952] wlan0: authenticate with 28:be:9b:be:2e:c5
[331364.040175] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[331364.243068] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[331364.447192] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[331364.651337] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[331366.306201] wlan0: authenticate with 28:be:9b:be:2e:c5
[331366.321604] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[331366.323260] wlan0: authenticated
[331366.324179] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[331366.326604] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[331366.333909] wlan0: associated
[331366.333935] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[332144.209571] cfg80211: Calling CRDA to update world regulatory domain
[332144.213219] cfg80211: World regulatory domain updated:
[332144.213224] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[332144.213226] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332144.213229] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332144.213231] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[332144.213233] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332144.213234] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332157.773750] wlan0: authenticate with 28:be:9b:be:2e:c5
[332157.786624] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[332157.788268] wlan0: authenticated
[332157.792503] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[332157.794889] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[332157.802165] wlan0: associated
[332235.280912] cfg80211: Calling CRDA to update world regulatory domain
[332235.286442] cfg80211: World regulatory domain updated:
[332235.286447] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[332235.286450] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332235.286452] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332235.286454] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[332235.286456] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332235.286458] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332236.506677] wlan0: authenticate with 28:be:9b:be:2e:c5
[332236.526510] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[332236.558778] wlan0: authenticated
[332236.561362] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[332236.563951] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[332236.571788] wlan0: associated
[332621.421141] cfg80211: Calling CRDA to update world regulatory domain
[332621.426431] cfg80211: World regulatory domain updated:
[332621.426436] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[332621.426439] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332621.426441] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332621.426443] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[332621.426445] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332621.426447] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332622.650810] wlan0: authenticate with 28:be:9b:be:2e:c5
[332622.663334] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[332622.665313] wlan0: authenticated
[332622.669695] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[332622.673233] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[332622.680422] wlan0: associated
[332655.443166] cfg80211: Calling CRDA to update world regulatory domain
[332655.450165] cfg80211: World regulatory domain updated:
[332655.450176] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[332655.450183] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332655.450189] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332655.450194] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[332655.450199] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332655.450203] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332656.692005] wlan0: authenticate with 28:be:9b:be:2e:c5
[332656.704563] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[332656.708539] wlan0: authenticated
[332656.711398] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[332656.713775] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[332656.721188] wlan0: associated
[332895.583722] cfg80211: Calling CRDA to update world regulatory domain
[332895.590141] cfg80211: World regulatory domain updated:
[332895.590149] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[332895.590152] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332895.590155] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332895.590157] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[332895.590159] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332895.590161] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[332896.825450] wlan0: authenticate with 28:be:9b:be:2e:c5
[332896.848970] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[332896.850571] wlan0: authenticated
[332896.851960] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[332896.854372] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[332896.861807] wlan0: associated
[333034.619610] cfg80211: Calling CRDA to update world regulatory domain
[333034.626575] cfg80211: World regulatory domain updated:
[333034.626585] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[333034.626592] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[333034.626598] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[333034.626603] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[333034.626608] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[333034.626613] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[333048.131646] wlan0: authenticate with 28:be:9b:be:2e:c5
[333048.144058] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[333048.145661] wlan0: authenticated
[333048.146451] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[333048.150299] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[333048.157808] wlan0: associated
[334905.710357] cfg80211: Calling CRDA to update world regulatory domain
[334905.717554] cfg80211: World regulatory domain updated:
[334905.717564] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[334905.717571] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[334905.717578] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[334905.717583] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[334905.717588] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[334905.717593] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[334920.960262] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[334925.998885] wlan0: authenticate with 28:be:9b:be:2e:c5
[334926.002792] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[334926.204761] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[334926.408871] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[334926.410597] wlan0: authenticated
[334926.412910] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[334926.415522] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[334926.424873] wlan0: associated
[334926.424944] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[335601.605154] type=1400 audit(1423820343.931:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=25516 comm="apparmor_parser"
[335601.605178] type=1400 audit(1423820343.931:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=25516 comm="apparmor_parser"
[335601.606699] type=1400 audit(1423820343.931:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=25516 comm="apparmor_parser"
[336866.705355] cfg80211: Calling CRDA to update world regulatory domain
[336866.710889] cfg80211: World regulatory domain updated:
[336866.710894] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[336866.710897] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[336866.710900] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[336866.710902] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[336866.710904] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[336866.710905] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[336867.945714] wlan0: authenticate with 28:be:9b:be:2e:c5
[336867.958826] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[336867.982221] wlan0: authenticated
[336867.985849] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[336868.023606] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[336868.030959] wlan0: associated
[337690.128573] cfg80211: Calling CRDA to update world regulatory domain
[337690.134055] cfg80211: World regulatory domain updated:
[337690.134060] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[337690.134063] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[337690.134065] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[337690.134067] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[337690.134069] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[337690.134071] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[337691.362360] wlan0: authenticate with 28:be:9b:be:2e:c5
[337691.386357] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[337691.388312] wlan0: authenticated
[337691.389113] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[337691.391541] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[337691.398889] wlan0: associated
[338124.554492] usb 2-3: USB disconnect, device number 32
[338124.562597] ieee80211 phy27: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -19
[338126.162566] ieee80211 phy27: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[338126.171605] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=3)
[338126.207022] cfg80211: Calling CRDA to update world regulatory domain
[338126.235521] cfg80211: World regulatory domain updated:
[338126.235524] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[338126.235526] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[338126.235528] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[338126.235529] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[338126.235530] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[338126.235531] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[338126.474707] usb 2-3: new high-speed USB device number 33 using ehci-pci
[338126.624867] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[338126.624882] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[338126.624889] usb 2-3: Product: 802.11 n WLAN
[338126.624895] usb 2-3: Manufacturer: Ralink
[338126.624900] usb 2-3: SerialNumber: 1.0
[338126.742923] usb 2-3: reset high-speed USB device number 33 using ehci-pci
[338126.885795] ieee80211 phy28: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[338126.914062] ieee80211 phy28: rt2x00_set_rf: Info - RF chipset 5370 detected
[338126.914775] ieee80211 phy28: Selected rate control algorithm 'minstrel_ht'
[338126.940956] ieee80211 phy28: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[338126.940985] ieee80211 phy28: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[338127.189034] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[338127.189822] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[338151.657081] wlan0: authenticate with 28:be:9b:be:2e:c5
[338151.685023] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[338151.887924] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[338152.091995] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[338152.093661] wlan0: authenticated
[338152.096010] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[338152.098602] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[338152.108177] wlan0: associated
[338152.108192] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[339934.984940] cfg80211: Calling CRDA to update world regulatory domain
[339934.990519] cfg80211: World regulatory domain updated:
[339934.990525] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[339934.990527] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[339934.990530] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[339934.990532] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[339934.990534] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[339934.990536] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[339936.210839] wlan0: authenticate with 28:be:9b:be:2e:c5
[339936.234707] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[339936.236314] wlan0: authenticated
[339936.237383] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[339936.241109] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[339936.248452] wlan0: associated
[341511.863071] cfg80211: Calling CRDA to update world regulatory domain
[341511.869937] cfg80211: World regulatory domain updated:
[341511.869948] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[341511.869954] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[341511.869960] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[341511.869965] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[341511.869970] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[341511.869974] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[341519.211415] wlan0: authenticate with 28:be:9b:be:2e:c5
[341519.223838] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[341519.426748] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[341519.630855] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[341519.834958] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[341527.154850] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[341684.202750] wlan0: authenticate with 28:be:9b:be:2e:c5
[341684.206096] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[341684.207700] wlan0: authenticated
[341684.212212] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[341684.214587] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[341684.222923] wlan0: associated
[341684.222960] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[343771.472151] cfg80211: Calling CRDA to update world regulatory domain
[343771.479516] cfg80211: World regulatory domain updated:
[343771.479525] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[343771.479532] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[343771.479538] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[343771.479543] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[343771.479548] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[343771.479553] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[343778.841167] wlan0: authenticate with 28:be:9b:be:2e:c5
[343778.864854] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[343779.067859] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[343779.271966] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[343779.476066] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[343781.106587] wlan0: authenticate with 28:be:9b:be:2e:c5
[343781.130238] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[343781.333035] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[343781.537142] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[343781.741245] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[343786.810533] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[344006.903066] wlan0: authenticate with 28:be:9b:be:2e:c5
[344006.906426] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[344006.911909] wlan0: authenticated
[344006.914025] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[344006.917881] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[344006.926401] wlan0: associated
[344006.926441] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[344704.919677] cfg80211: Calling CRDA to update world regulatory domain
[344704.926659] cfg80211: World regulatory domain updated:
[344704.926670] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[344704.926677] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[344704.926683] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[344704.926688] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[344704.926693] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[344704.926697] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[344718.443513] wlan0: authenticate with 28:be:9b:be:2e:c5
[344718.456237] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[344718.458261] wlan0: authenticated
[344718.462475] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[344718.466502] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[344718.473538] wlan0: associated
[344814.028331] cfg80211: Calling CRDA to update world regulatory domain
[344814.033897] cfg80211: World regulatory domain updated:
[344814.033902] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[344814.033904] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[344814.033907] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[344814.033909] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[344814.033911] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[344814.033912] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[344829.307292] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[344834.290763] wlan0: authenticate with 28:be:9b:be:2e:c5
[344834.294353] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[344834.494712] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[344834.698842] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[344834.902939] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[344836.600491] wlan0: authenticate with 28:be:9b:be:2e:c5
[344836.615682] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[344836.819903] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[344837.023991] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[344837.228124] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[344851.744099] wlan0: authenticate with 28:be:9b:be:2e:c5
[344851.756911] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[344851.959728] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[344852.163849] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[344852.367954] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[344862.128562] wlan0: authenticate with 28:be:9b:be:2e:c5
[344862.132178] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[344862.333151] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[344862.537221] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[344862.741311] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[344886.270690] wlan0: authenticate with 28:be:9b:be:2e:c5
[344886.284683] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[344886.485668] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[344886.689762] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[344886.893866] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[344909.831303] wlan0: authenticate with 28:be:9b:be:2e:c5
[344909.847801] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[344910.049882] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[344910.254000] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[344910.458105] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[345216.486045] wlan0: authenticate with 28:be:9b:be:2e:c5
[345216.502233] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[345216.504215] wlan0: authenticated
[345216.504854] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[345216.507348] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[345216.514802] wlan0: associated
[345216.514838] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[347667.529655] cfg80211: Calling CRDA to update world regulatory domain
[347667.536547] cfg80211: World regulatory domain updated:
[347667.536557] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[347667.536563] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[347667.536569] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[347667.536575] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[347667.536579] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[347667.536584] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[347682.823956] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[347684.114809] wlan0: authenticate with 28:be:9b:be:2e:c5
[347684.119037] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[347684.120777] wlan0: authenticated
[347684.121977] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[347684.124775] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[347684.133396] wlan0: associated
[347684.133425] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[348133.859759] cfg80211: Calling CRDA to update world regulatory domain
[348133.867147] cfg80211: World regulatory domain updated:
[348133.867157] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[348133.867164] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[348133.867170] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[348133.867175] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[348133.867180] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[348133.867185] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[348141.244733] wlan0: authenticate with 28:be:9b:be:2e:c5
[348141.268705] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[348141.471490] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[348141.675595] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[348141.879700] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[348149.115466] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[348177.085505] wlan0: authenticate with 28:be:9b:be:2e:c5
[348177.089879] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[348177.294310] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[348177.498242] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[348177.702291] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[348179.912734] wlan0: authenticate with 28:be:9b:be:2e:c5
[348179.932777] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[348180.135522] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[348180.339642] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[348180.341371] wlan0: authenticated
[348180.343665] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[348180.346628] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[348180.355855] wlan0: associated
[348180.355881] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[348384.927038] cfg80211: Calling CRDA to update world regulatory domain
[348384.932456] cfg80211: World regulatory domain updated:
[348384.932461] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[348384.932463] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[348384.932466] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[348384.932468] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[348384.932470] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[348384.932472] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[348392.283962] wlan0: authenticate with 28:be:9b:be:2e:c5
[348392.307654] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[348392.510654] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[348392.714773] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[348392.918875] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[348400.238308] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[348405.246526] wlan0: authenticate with 28:be:9b:be:2e:c5
[348405.249871] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[348405.453443] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[348405.657458] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[348405.861591] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[348408.048525] wlan0: authenticate with 28:be:9b:be:2e:c5
[348408.064918] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[348408.266871] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[348408.470993] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[348408.675056] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[348427.223966] wlan0: authenticate with 28:be:9b:be:2e:c5
[348427.238227] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[348427.440778] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[348427.644881] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[348427.848999] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[348433.057168] wlan0: authenticate with 28:be:9b:be:2e:c5
[348433.060709] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[348433.263803] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[348433.467945] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[348433.672076] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[348444.879935] wlan0: authenticate with 28:be:9b:be:2e:c5
[348444.895261] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[348444.896959] wlan0: authenticated
[348444.898001] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[348444.902356] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[348444.910072] wlan0: associated
[348444.910098] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[352144.889535] cfg80211: Calling CRDA to update world regulatory domain
[352144.896876] cfg80211: World regulatory domain updated:
[352144.896885] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[352144.896892] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[352144.896898] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[352144.896903] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[352144.896908] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[352144.896912] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[352160.195562] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[352165.234270] wlan0: authenticate with 28:be:9b:be:2e:c5
[352165.237624] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[352165.439968] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[352165.644045] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[352165.848150] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[352179.916036] wlan0: authenticate with 28:be:9b:be:2e:c5
[352179.929128] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[352180.131582] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[352180.335688] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[352180.539778] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[352194.179993] wlan0: authenticate with 28:be:9b:be:2e:c5
[352194.193977] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[352194.394953] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[352194.599073] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[352194.803175] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[352240.712321] wlan0: authenticate with 28:be:9b:be:2e:c5
[352240.728054] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[352240.733906] wlan0: authenticated
[352240.735012] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[352240.737493] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[352240.745408] wlan0: associated
[352240.745432] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[354393.081861] cfg80211: Calling CRDA to update world regulatory domain
[354393.088761] cfg80211: World regulatory domain updated:
[354393.088771] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[354393.088778] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[354393.088785] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[354393.088790] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[354393.088795] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[354393.088800] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[354408.444333] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[354512.473217] wlan0: authenticate with 28:be:9b:be:2e:c5
[354512.477430] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[354512.479149] wlan0: authenticated
[354512.479542] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[354512.482047] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[354512.491150] wlan0: associated
[354512.491182] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[355559.691160] cfg80211: Calling CRDA to update world regulatory domain
[355559.698991] cfg80211: World regulatory domain updated:
[355559.699002] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[355559.699009] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[355559.699015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[355559.699020] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[355559.699025] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[355559.699029] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[355567.048293] wlan0: authenticate with 28:be:9b:be:2e:c5
[355567.072225] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[355567.274956] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[355567.276623] wlan0: authenticated
[355567.278960] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[355567.281536] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[355567.289486] wlan0: associated
[355932.677208] usb 2-3: USB disconnect, device number 33
[355932.684689] ieee80211 phy28: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -19
[355934.301367] ieee80211 phy28: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[355934.317375] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=3)
[355934.358167] cfg80211: Calling CRDA to update world regulatory domain
[355934.368079] cfg80211: World regulatory domain updated:
[355934.368085] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[355934.368087] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[355934.368090] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[355934.368092] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[355934.368094] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[355934.368096] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[355934.637540] usb 2-3: new high-speed USB device number 34 using ehci-pci
[355934.787877] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[355934.787894] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[355934.787901] usb 2-3: Product: 802.11 n WLAN
[355934.787907] usb 2-3: Manufacturer: Ralink
[355934.787912] usb 2-3: SerialNumber: 1.0
[355934.905733] usb 2-3: reset high-speed USB device number 34 using ehci-pci
[355935.048537] ieee80211 phy29: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[355935.076649] ieee80211 phy29: rt2x00_set_rf: Info - RF chipset 5370 detected
[355935.077074] ieee80211 phy29: Selected rate control algorithm 'minstrel_ht'
[355935.100130] ieee80211 phy29: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[355935.100160] ieee80211 phy29: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[355935.339807] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[355935.340705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[355936.603349] wlan0: authenticate with 28:be:9b:be:2e:c5
[355936.626388] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[355936.826711] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[355937.030853] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[355937.234906] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[355938.540509] wlan0: authenticate with 28:be:9b:be:2e:c5
[355938.555184] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[355938.556849] wlan0: authenticated
[355938.559562] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[355938.561952] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[355938.569470] wlan0: associated
[355938.569494] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[358807.425571] cfg80211: Calling CRDA to update world regulatory domain
[358807.432414] cfg80211: World regulatory domain updated:
[358807.432424] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[358807.432431] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[358807.432437] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[358807.432442] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[358807.432447] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[358807.432452] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[358822.775248] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[358824.069178] wlan0: authenticate with 28:be:9b:be:2e:c5
[358824.073735] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[358824.274041] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[358824.275683] wlan0: authenticated
[358824.278210] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[358824.280698] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[358824.289720] wlan0: associated
[358824.289800] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[359688.970437] cfg80211: Calling CRDA to update world regulatory domain
[359688.977492] cfg80211: World regulatory domain updated:
[359688.977501] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[359688.977508] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[359688.977514] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[359688.977519] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[359688.977523] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[359688.977528] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[359702.546040] wlan0: authenticate with 28:be:9b:be:2e:c5
[359702.558533] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[359702.761036] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[359702.965140] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[359703.169246] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[359704.302837] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[361185.032862] wlan0: authenticate with 28:be:9b:be:2e:c5
[361185.040840] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[361185.042431] wlan0: authenticated
[361185.046077] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[361185.048444] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[361185.055817] wlan0: associated
[361185.055849] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[361904.110205] cfg80211: Calling CRDA to update world regulatory domain
[361904.118209] cfg80211: World regulatory domain updated:
[361904.118218] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[361904.118225] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[361904.118231] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[361904.118237] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[361904.118241] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[361904.118246] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[361905.348099] wlan0: authenticate with 28:be:9b:be:2e:c5
[361905.371669] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[361905.412328] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[361905.461982] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[361905.498095] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[361919.474308] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[362023.507201] wlan0: authenticate with 28:be:9b:be:2e:c5
[362023.514980] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[362023.716018] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[362023.920184] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[362024.124304] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[362032.501695] wlan0: authenticate with 28:be:9b:be:2e:c5
[362032.521655] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[362032.523267] wlan0: authenticated
[362032.524648] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[362032.527162] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[362032.534652] wlan0: associated
[362032.534676] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[362464.453059] cfg80211: Calling CRDA to update world regulatory domain
[362464.456669] cfg80211: World regulatory domain updated:
[362464.456674] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[362464.456676] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[362464.456679] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[362464.456681] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[362464.456683] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[362464.456685] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[362465.659089] wlan0: authenticate with 28:be:9b:be:2e:c5
[362465.682688] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[362465.714333] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[362465.749345] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[362465.777593] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[362467.423826] wlan0: authenticate with 28:be:9b:be:2e:c5
[362467.447588] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[362467.650620] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[362467.854725] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[362468.058828] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[362479.766485] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[362480.991740] wlan0: authenticate with 28:be:9b:be:2e:c5
[362480.995052] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[362481.197695] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[362481.401745] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[362481.605841] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[362493.997632] wlan0: authenticate with 28:be:9b:be:2e:c5
[362494.015354] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[362494.216380] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[362494.420463] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[362494.624634] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[362509.589850] wlan0: authenticate with 28:be:9b:be:2e:c5
[362509.598501] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[362509.800454] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[362510.004678] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[362510.208703] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[362521.423372] wlan0: authenticate with 28:be:9b:be:2e:c5
[362521.435626] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[362521.638622] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[362521.842734] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[362522.046825] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[362537.591520] wlan0: authenticate with 28:be:9b:be:2e:c5
[362537.597380] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[362537.799040] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[362538.003101] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[362538.207294] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[362561.740776] wlan0: authenticate with 28:be:9b:be:2e:c5
[362561.756911] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[362561.959533] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[362562.163640] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[362562.367760] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[362863.949096] wlan0: authenticate with 28:be:9b:be:2e:c5
[362863.961443] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[362863.963836] wlan0: authenticated
[362863.964164] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[362863.966586] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[362863.975287] wlan0: associated
[362863.975313] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[363265.908647] cfg80211: Calling CRDA to update world regulatory domain
[363265.914579] cfg80211: World regulatory domain updated:
[363265.914584] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[363265.914587] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363265.914589] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363265.914592] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[363265.914593] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363265.914595] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363267.158482] wlan0: authenticate with 28:be:9b:be:2e:c5
[363267.186306] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363267.250534] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[363267.275429] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[363267.309306] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[363268.995338] wlan0: authenticate with 28:be:9b:be:2e:c5
[363269.011368] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[363269.214160] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[363269.418267] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[363269.622368] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[363271.761438] wlan0: authenticate with 28:be:9b:be:2e:c5
[363271.804445] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[363272.007609] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[363272.211715] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[363272.415819] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[363281.198119] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[363286.161836] wlan0: authenticate with 28:be:9b:be:2e:c5
[363286.166067] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363286.167681] wlan0: authenticated
[363286.170922] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[363286.173900] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[363286.181664] wlan0: associated
[363286.181696] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[363313.873087] cfg80211: Calling CRDA to update world regulatory domain
[363313.880084] cfg80211: World regulatory domain updated:
[363313.880094] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[363313.880101] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363313.880107] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363313.880112] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[363313.880117] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363313.880122] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363315.130516] wlan0: authenticate with 28:be:9b:be:2e:c5
[363315.142332] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363315.161592] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[363315.185356] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[363315.230490] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[363329.235467] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[363330.503438] wlan0: authenticate with 28:be:9b:be:2e:c5
[363330.521062] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363330.522770] wlan0: authenticated
[363330.525443] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[363330.528006] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[363330.538511] wlan0: associated
[363330.538550] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[363331.390657] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=2)
[363331.418477] wlan0: authenticate with 28:be:9b:be:2e:c5
[363331.424398] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363331.425196] cfg80211: Calling CRDA to update world regulatory domain
[363331.426807] wlan0: authenticated
[363331.429134] cfg80211: World regulatory domain updated:
[363331.429140] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[363331.429142] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363331.429145] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363331.429146] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[363331.429148] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363331.429149] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363331.429787] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[363331.432335] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[363331.441639] wlan0: associated
[363338.905898] cfg80211: Calling CRDA to update world regulatory domain
[363338.912006] cfg80211: World regulatory domain updated:
[363338.912011] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[363338.912014] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363338.912017] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363338.912019] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[363338.912021] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363338.912022] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363340.216220] wlan0: authenticate with 28:be:9b:be:2e:c5
[363340.235205] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363340.268198] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[363340.312231] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[363340.342135] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[363354.515343] wlan0: authenticate with 28:be:9b:be:2e:c5
[363354.533572] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363354.535239] wlan0: authenticated
[363354.537771] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[363354.540267] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[363354.550022] wlan0: associated
[363690.075992] cfg80211: Calling CRDA to update world regulatory domain
[363690.083282] cfg80211: World regulatory domain updated:
[363690.083292] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[363690.083300] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363690.083306] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363690.083311] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[363690.083316] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363690.083321] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363691.301719] wlan0: authenticate with 28:be:9b:be:2e:c5
[363691.325613] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363691.358373] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[363691.395650] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[363691.457662] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[363705.381022] wlan0: authenticate with 28:be:9b:be:2e:c5
[363705.407100] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363705.408860] wlan0: authenticated
[363705.411761] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[363705.414248] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[363705.421256] wlan0: associated
[363705.446893] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=3)
[363705.506372] cfg80211: Calling CRDA to update world regulatory domain
[363705.510857] cfg80211: World regulatory domain updated:
[363705.510866] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[363705.510868] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363705.510869] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363705.510871] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[363705.510872] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363705.510873] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363706.728953] wlan0: authenticate with 28:be:9b:be:2e:c5
[363706.748150] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363706.782153] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[363706.796168] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[363706.800581] wlan0: authenticated
[363706.804501] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[363706.808334] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[363706.816615] wlan0: associated
[363706.829353] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=2)
[363706.858974] wlan0: authenticate with 28:be:9b:be:2e:c5
[363706.864258] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[363706.864858] cfg80211: Calling CRDA to update world regulatory domain
[363706.866159] wlan0: authenticated
[363706.870324] cfg80211: World regulatory domain updated:
[363706.870330] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[363706.870333] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363706.870335] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363706.870337] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[363706.870339] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363706.870341] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[363706.870633] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[363706.873058] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[363706.882678] wlan0: associated
[365006.851102] cfg80211: Calling CRDA to update world regulatory domain
[365006.854552] cfg80211: World regulatory domain updated:
[365006.854557] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[365006.854560] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[365006.854562] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[365006.854564] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[365006.854566] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[365006.854568] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[365014.240340] wlan0: authenticate with 28:be:9b:be:2e:c5
[365014.275061] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[365014.478918] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[365014.683024] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[365014.887128] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[365016.544952] wlan0: authenticate with 28:be:9b:be:2e:c5
[365016.557167] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[365016.760102] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[365016.964208] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[365017.168311] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[365022.115620] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[365305.200742] wlan0: authenticate with 28:be:9b:be:2e:c5
[365305.204457] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[365305.206112] wlan0: authenticated
[365305.209726] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[365305.218858] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[365305.232558] wlan0: associated
[365305.232589] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[366025.327216] cfg80211: Calling CRDA to update world regulatory domain
[366025.330666] cfg80211: World regulatory domain updated:
[366025.330670] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[366025.330673] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[366025.330675] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[366025.330677] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[366025.330679] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[366025.330681] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[366026.572995] wlan0: authenticate with 28:be:9b:be:2e:c5
[366026.597120] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[366026.655729] wlan0: send auth to 28:be:9b:be:2e:c5 (try 2/3)
[366026.712098] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[366026.748248] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[366040.693253] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[366260.767580] wlan0: authenticate with 28:be:9b:be:2e:c5
[366260.771120] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[366260.772836] wlan0: authenticated
[366260.773223] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[366260.775591] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[366260.783166] wlan0: associated
[366260.783243] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[366463.655708] cfg80211: Calling CRDA to update world regulatory domain
[366463.663060] cfg80211: World regulatory domain updated:
[366463.663070] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[366463.663077] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[366463.663083] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[366463.663088] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[366463.663093] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[366463.663097] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[366478.911101] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[366483.892004] wlan0: authenticate with 28:be:9b:be:2e:c5
[366483.895669] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[366484.098358] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[366484.302214] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[366484.506453] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[366486.176309] wlan0: authenticate with 28:be:9b:be:2e:c5
[366486.196279] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[366486.399309] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[366486.603432] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 3/3)
[366486.807519] wlan0: authentication with 28:be:9b:be:2e:c5 timed out
[366501.364325] wlan0: authenticate with 28:be:9b:be:2e:c5
[366501.380097] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 1/3)
[366501.583184] wlan0: direct probe to 28:be:9b:be:2e:c5 (try 2/3)
[366501.787292] wlan0: send auth to 28:be:9b:be:2e:c5 (try 3/3)
[366501.788998] wlan0: authenticated
[366501.791345] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[366501.793832] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[366501.801361] wlan0: associated
[366501.801386] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[367572.983569] usb 2-3: USB disconnect, device number 34
[367572.991054] ieee80211 phy29: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -19
[367574.580011] cfg80211: Calling CRDA to update world regulatory domain
[367574.586905] cfg80211: World regulatory domain updated:
[367574.586915] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[367574.586922] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[367574.586929] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[367574.586934] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[367574.586938] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[367574.586943] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[367574.591658] ieee80211 phy29: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[367574.911834] usb 2-3: new high-speed USB device number 35 using ehci-pci
[367575.066044] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[367575.066057] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[367575.066064] usb 2-3: Product: 802.11 n WLAN
[367575.066070] usb 2-3: Manufacturer: Ralink
[367575.066074] usb 2-3: SerialNumber: 1.0
[367575.184063] usb 2-3: reset high-speed USB device number 35 using ehci-pci
[367575.326837] ieee80211 phy30: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[367575.355242] ieee80211 phy30: rt2x00_set_rf: Info - RF chipset 5370 detected
[367575.355750] ieee80211 phy30: Selected rate control algorithm 'minstrel_ht'
[367575.376671] ieee80211 phy30: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[367575.376700] ieee80211 phy30: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[367575.622206] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[367575.622669] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[367577.974083] wlan0: authenticate with 28:be:9b:be:2e:c5
[367578.010271] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[367578.013491] wlan0: authenticated
[367578.017450] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[367578.019882] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[367578.027249] wlan0: associated
[367578.027283] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[367578.877342] wlan0: deauthenticating from 28:be:9b:be:2e:c5 by local choice (reason=2)
[367578.900833] cfg80211: Calling CRDA to update world regulatory domain
[367578.901016] wlan0: authenticate with 28:be:9b:be:2e:c5
[367578.905345] wlan0: send auth to 28:be:9b:be:2e:c5 (try 1/3)
[367578.906952] wlan0: authenticated
[367578.910059] wlan0: associate with 28:be:9b:be:2e:c5 (try 1/3)
[367578.911326] cfg80211: World regulatory domain updated:
[367578.911330] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[367578.911332] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[367578.911333] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[367578.911335] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[367578.911336] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[367578.911337] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[367578.912551] wlan0: RX AssocResp from 28:be:9b:be:2e:c5 (capab=0x411 status=0 aid=2)
[367578.922173] wlan0: associated
[367942.407233] init: smbd pre-start process (29360) terminated with status 64
[367946.320202] init: smbd pre-start process (29449) terminated with status 64
[368570.755065] init: smbd pre-start process (30582) terminated with status 64
[368767.379133] init: smbd pre-start process (32044) terminated with status 64