[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-15-generic (buildd@batsu) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #60-Ubuntu SMP Tue May 22 11:28:40 UTC 2012 (Ubuntu 2.6.38-15.60-generic 2.6.38.8) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-15-generic root=UUID=145a4966-c49e-459c-8afc-f78345e21405 ro quiet splash vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: System manufacturer P5E3 Deluxe/P5E3 Deluxe, BIOS 1415 06/18/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 120000000 mask FF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff80000 page 4k [ 0.000000] kernel direct mapping tables up to cff80000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ cff7a000-cff80000 [ 0.000000] RAMDISK: 366d4000 - 37362000 [ 0.000000] ACPI: RSDP 00000000000fba70 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cff80000 0003C (v01 A_M_I_ OEMRSDT 06000918 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 06000918 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff80440 09C81 (v01 A0834 A0834102 00000102 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cff8e000 00040 [ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 06000918 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 06000918 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 06000918 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff8a0d0 00038 (v01 A_M_I_ OEMHPET 06000918 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000cff8a110 000B0 (v01 A_M_I_ OEMOSFR 06000918 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff] [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff80 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048335 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000 [ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s84416 r8192 d22080 u524288 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031305 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-15-generic root=UUID=145a4966-c49e-459c-8afc-f78345e21405 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4041136k/4980736k available (5969k kernel code, 787396k absent, 152204k reserved, 4989k data, 960k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3014.829 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6029.65 BogoMIPS (lpj=30148290) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000023] Security Framework initialized [ 0.000035] AppArmor: AppArmor initialized [ 0.000037] Yama: becoming mindful. [ 0.010033] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011463] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012118] Mount-cache hash table entries: 256 [ 0.012224] Initializing cgroup subsys ns [ 0.012227] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.012230] Initializing cgroup subsys cpuacct [ 0.012233] Initializing cgroup subsys memory [ 0.012239] Initializing cgroup subsys devices [ 0.012241] Initializing cgroup subsys freezer [ 0.012242] Initializing cgroup subsys net_cls [ 0.012244] Initializing cgroup subsys blkio [ 0.012270] CPU: Physical Processor ID: 0 [ 0.012271] CPU: Processor Core ID: 0 [ 0.012273] mce: CPU supports 6 MCE banks [ 0.012279] CPU0: Thermal monitoring enabled (TM2) [ 0.012282] using mwait in idle threads. [ 0.014270] ACPI: Core revision 20110112 [ 0.020011] ftrace: allocating 24407 entries in 96 pages [ 0.030036] Setting APIC routing to flat [ 0.030332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.133534] CPU0: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz stepping 06 [ 0.140000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.140000] ... version: 2 [ 0.140000] ... bit width: 40 [ 0.140000] ... generic registers: 2 [ 0.140000] ... value mask: 000000ffffffffff [ 0.140000] ... max period: 000000007fffffff [ 0.140000] ... fixed-purpose events: 3 [ 0.140000] ... event mask: 0000000700000003 [ 0.140000] Booting Node 0, Processors #1 #2 #3 Ok. [ 0.640005] Brought up 4 CPUs [ 0.640008] Total of 4 processors activated (24116.61 BogoMIPS). [ 0.642845] devtmpfs: initialized [ 0.642845] print_constraints: dummy: [ 0.642845] Time: 3:46:37 Date: 06/26/12 [ 0.642845] NET: Registered protocol family 16 [ 0.642845] Trying to unpack rootfs image as initramfs... [ 0.642845] ACPI: bus type pci registered [ 0.642845] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.642845] PCI: not using MMCONFIG [ 0.642845] PCI: Using configuration type 1 for base access [ 0.660267] bio: create slab at 0 [ 0.660949] ACPI: EC: Look up EC in DSDT [ 0.661920] ACPI: Executed 1 blocks of module-level executable AML code [ 0.666373] ACPI: SSDT 00000000cff8e0d0 00190 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.666598] ACPI: Dynamic OEM Table Load: [ 0.666601] ACPI: SSDT (null) 00190 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.666732] ACPI: SSDT 00000000cff8e260 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.666953] ACPI: Dynamic OEM Table Load: [ 0.666955] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.667086] ACPI: SSDT 00000000cff8e3b0 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) [ 0.667308] ACPI: Dynamic OEM Table Load: [ 0.667310] ACPI: SSDT (null) 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) [ 0.667446] ACPI: SSDT 00000000cff8e500 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) [ 0.667670] ACPI: Dynamic OEM Table Load: [ 0.667672] ACPI: SSDT (null) 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) [ 0.667792] ACPI: Interpreter enabled [ 0.667795] ACPI: (supports S0 S1 S3 S4 S5) [ 0.667810] ACPI: Using IOAPIC for interrupt routing [ 0.667827] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.668556] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.705070] ACPI: No dock devices found. [ 0.705073] HEST: Table not found. [ 0.705075] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.705123] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.705222] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.705224] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.705226] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.705227] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.705229] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff] [ 0.705239] pci 0000:00:00.0: [8086:29e0] type 0 class 0x000600 [ 0.705268] pci 0000:00:01.0: [8086:29e1] type 1 class 0x000604 [ 0.705289] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.705292] pci 0000:00:01.0: PME# disabled [ 0.705323] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.705358] pci 0000:00:1a.0: reg 20: [io 0xa800-0xa81f] [ 0.705394] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.705428] pci 0000:00:1a.1: reg 20: [io 0xa880-0xa89f] [ 0.705466] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.705501] pci 0000:00:1a.2: reg 20: [io 0xac00-0xac1f] [ 0.705543] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.705561] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff] [ 0.705623] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.705626] pci 0000:00:1a.7: PME# disabled [ 0.705645] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.705657] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit] [ 0.705701] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.705704] pci 0000:00:1b.0: PME# disabled [ 0.705721] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.705764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.705767] pci 0000:00:1c.0: PME# disabled [ 0.705786] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 [ 0.705830] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.705833] pci 0000:00:1c.4: PME# disabled [ 0.705849] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604 [ 0.705893] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.705896] pci 0000:00:1c.5: PME# disabled [ 0.705916] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.705951] pci 0000:00:1d.0: reg 20: [io 0xa080-0xa09f] [ 0.705986] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.706022] pci 0000:00:1d.1: reg 20: [io 0xa400-0xa41f] [ 0.706058] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.706093] pci 0000:00:1d.2: reg 20: [io 0xa480-0xa49f] [ 0.706136] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.706154] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff] [ 0.706216] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.706219] pci 0000:00:1d.7: PME# disabled [ 0.706235] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.706281] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601 [ 0.706352] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.706384] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101 [ 0.706396] pci 0000:00:1f.2: reg 10: [io 0x9000-0x9007] [ 0.706402] pci 0000:00:1f.2: reg 14: [io 0x8c00-0x8c03] [ 0.706408] pci 0000:00:1f.2: reg 18: [io 0x8880-0x8887] [ 0.706415] pci 0000:00:1f.2: reg 1c: [io 0x8800-0x8803] [ 0.706421] pci 0000:00:1f.2: reg 20: [io 0x8480-0x848f] [ 0.706427] pci 0000:00:1f.2: reg 24: [io 0x8400-0x840f] [ 0.706456] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.706468] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit] [ 0.706485] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.706512] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101 [ 0.706524] pci 0000:00:1f.5: reg 10: [io 0xa000-0xa007] [ 0.706530] pci 0000:00:1f.5: reg 14: [io 0x9c00-0x9c03] [ 0.706537] pci 0000:00:1f.5: reg 18: [io 0x9880-0x9887] [ 0.706543] pci 0000:00:1f.5: reg 1c: [io 0x9800-0x9803] [ 0.706549] pci 0000:00:1f.5: reg 20: [io 0x9480-0x948f] [ 0.706556] pci 0000:00:1f.5: reg 24: [io 0x9400-0x940f] [ 0.706607] pci 0000:01:00.0: [10de:0611] type 0 class 0x000300 [ 0.706615] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.706624] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.706632] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.706639] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f] [ 0.706645] pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref] [ 0.706681] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.706683] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.706685] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff] [ 0.706688] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.706719] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.706722] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.706726] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.706731] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.706776] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101 [ 0.706855] pci 0000:03:00.0: reg 24: [mem 0xfeafe000-0xfeafffff] [ 0.706867] pci 0000:03:00.0: reg 30: [mem 0xfeae0000-0xfeaeffff pref] [ 0.706895] pci 0000:03:00.0: PME# supported from D3hot [ 0.706899] pci 0000:03:00.0: PME# disabled [ 0.706925] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101 [ 0.706947] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07] [ 0.706959] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883] [ 0.706971] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807] [ 0.706983] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483] [ 0.706995] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f] [ 0.707058] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.707070] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.707072] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.707075] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.707080] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.707129] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200 [ 0.707149] pci 0000:02:00.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 0.707159] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff] [ 0.707198] pci 0000:02:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref] [ 0.707232] pci 0000:02:00.0: supports D1 D2 [ 0.707234] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.707238] pci 0000:02:00.0: PME# disabled [ 0.720017] pci 0000:00:1c.5: PCI bridge to [bus 02-02] [ 0.720021] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.720024] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.720029] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.720081] pci 0000:05:03.0: [11c1:5811] type 0 class 0x000c00 [ 0.720096] pci 0000:05:03.0: reg 10: [mem 0xfebff000-0xfebfffff] [ 0.720151] pci 0000:05:03.0: supports D1 D2 [ 0.720153] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot [ 0.720156] pci 0000:05:03.0: PME# disabled [ 0.720170] pci 0000:05:04.0: [10ec:8167] type 0 class 0x000200 [ 0.720184] pci 0000:05:04.0: reg 10: [io 0xe800-0xe8ff] [ 0.720192] pci 0000:05:04.0: reg 14: [mem 0xfebfec00-0xfebfecff] [ 0.720228] pci 0000:05:04.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 0.720243] pci 0000:05:04.0: supports D1 D2 [ 0.720244] pci 0000:05:04.0: PME# supported from D1 D2 D3hot D3cold [ 0.720247] pci 0000:05:04.0: PME# disabled [ 0.720281] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.720284] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.720287] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.720291] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.720293] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.720295] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.720297] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.720298] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.720300] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) [ 0.720320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.720412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.720437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.720497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.720525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.720555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.720595] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.726708] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.726745] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.726779] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.726813] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.726848] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.726882] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.726921] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.726955] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.727042] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.727045] vgaarb: loaded [ 0.727185] SCSI subsystem initialized [ 0.727229] libata version 3.00 loaded. [ 0.727229] usbcore: registered new interface driver usbfs [ 0.727229] usbcore: registered new interface driver hub [ 0.727229] usbcore: registered new device driver usb [ 0.727229] wmi: Mapper loaded [ 0.727229] PCI: Using ACPI for IRQ routing [ 0.727229] PCI: pci_cache_line_size set to 64 bytes [ 0.727229] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.727229] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff [ 0.727229] NetLabel: Initializing [ 0.727229] NetLabel: domain hash size = 128 [ 0.727229] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.727229] NetLabel: unlabeled traffic allowed by default [ 0.727229] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.727229] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.727229] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.750027] Switching to clocksource hpet [ 0.755492] AppArmor: AppArmor Filesystem Enabled [ 0.755515] pnp: PnP ACPI init [ 0.755531] ACPI: bus type pnp registered [ 0.755607] pnp 00:00: [bus 00-ff] [ 0.755609] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.755610] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.755612] pnp 00:00: [io 0x0d00-0xffff window] [ 0.755614] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.755615] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.755617] pnp 00:00: [mem 0xd0000000-0xffffffff window] [ 0.755672] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.755680] pnp 00:01: [mem 0xfed14000-0xfed19fff] [ 0.755728] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.755731] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.755756] pnp 00:02: [dma 4] [ 0.755758] pnp 00:02: [io 0x0000-0x000f] [ 0.755759] pnp 00:02: [io 0x0081-0x0083] [ 0.755760] pnp 00:02: [io 0x0087] [ 0.755762] pnp 00:02: [io 0x0089-0x008b] [ 0.755763] pnp 00:02: [io 0x008f] [ 0.755764] pnp 00:02: [io 0x00c0-0x00df] [ 0.755783] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.755790] pnp 00:03: [io 0x0070-0x0071] [ 0.755799] pnp 00:03: [irq 8] [ 0.755818] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.755824] pnp 00:04: [io 0x0061] [ 0.755848] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.755855] pnp 00:05: [io 0x00f0-0x00ff] [ 0.755859] pnp 00:05: [irq 13] [ 0.755878] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.756091] pnp 00:06: [irq 6] [ 0.756093] pnp 00:06: [dma 2] [ 0.756095] pnp 00:06: [io 0x03f0-0x03f5] [ 0.756096] pnp 00:06: [io 0x03f7] [ 0.756138] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.756161] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 0.756163] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 0.756164] pnp 00:07: [io 0x0290-0x0297] [ 0.756200] system 00:07: [io 0x0290-0x0297] has been reserved [ 0.756202] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.756272] pnp 00:08: [io 0x0010-0x001f] [ 0.756274] pnp 00:08: [io 0x0022-0x003f] [ 0.756275] pnp 00:08: [io 0x0044-0x004d] [ 0.756276] pnp 00:08: [io 0x0050-0x005f] [ 0.756278] pnp 00:08: [io 0x0062-0x0063] [ 0.756279] pnp 00:08: [io 0x0065-0x006f] [ 0.756280] pnp 00:08: [io 0x0072-0x007f] [ 0.756281] pnp 00:08: [io 0x0080] [ 0.756283] pnp 00:08: [io 0x0084-0x0086] [ 0.756284] pnp 00:08: [io 0x0088] [ 0.756285] pnp 00:08: [io 0x008c-0x008e] [ 0.756286] pnp 00:08: [io 0x0090-0x009f] [ 0.756288] pnp 00:08: [io 0x00a2-0x00bf] [ 0.756289] pnp 00:08: [io 0x00e0-0x00ef] [ 0.756290] pnp 00:08: [io 0x04d0-0x04d1] [ 0.756291] pnp 00:08: [io 0x0800-0x087f] [ 0.756293] pnp 00:08: [io 0x0400-0x03ff disabled] [ 0.756294] pnp 00:08: [io 0x0480-0x04bf] [ 0.756296] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] [ 0.756297] pnp 00:08: [mem 0xfed20000-0xfed3ffff] [ 0.756298] pnp 00:08: [mem 0xfed50000-0xfed8ffff] [ 0.756300] pnp 00:08: [mem 0xffa00000-0xffafffff] [ 0.756301] pnp 00:08: [mem 0xffb00000-0xffbfffff] [ 0.756302] pnp 00:08: [mem 0xffe00000-0xffefffff] [ 0.756304] pnp 00:08: [mem 0xfff00000-0xfffffffe] [ 0.756368] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.756370] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.756372] system 00:08: [io 0x0480-0x04bf] has been reserved [ 0.756374] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.756376] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.756378] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.756380] system 00:08: [mem 0xffa00000-0xffafffff] has been reserved [ 0.756382] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.756385] system 00:08: [mem 0xffe00000-0xffefffff] has been reserved [ 0.756389] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved [ 0.756391] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.756441] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.756463] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.756498] pnp 00:0a: [mem 0xffa00000-0xffbfffff] [ 0.756499] pnp 00:0a: [mem 0xffe00000-0xffffffff] [ 0.756522] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active) [ 0.756551] pnp 00:0b: [mem 0xffc00000-0xffdfffff] [ 0.756586] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.756589] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.756770] pnp 00:0c: [irq 4] [ 0.756772] pnp 00:0c: [dma 0 disabled] [ 0.756773] pnp 00:0c: [io 0x03f8-0x03ff] [ 0.756821] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.756853] pnp 00:0d: [mem 0xfec00000-0xfec00fff] [ 0.756855] pnp 00:0d: [mem 0xfee00000-0xfee00fff] [ 0.756891] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.756893] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.756896] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.756916] pnp 00:0e: [io 0x0060] [ 0.756918] pnp 00:0e: [io 0x0064] [ 0.756922] pnp 00:0e: [irq 1] [ 0.756946] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.756970] pnp 00:0f: [mem 0xe0000000-0xefffffff] [ 0.757006] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved [ 0.757009] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.757363] pnp 00:10: [mem 0x00000000-0x0009ffff] [ 0.757365] pnp 00:10: [mem 0x000c0000-0x000cffff] [ 0.757367] pnp 00:10: [mem 0x000e0000-0x000fffff] [ 0.757368] pnp 00:10: [mem 0x00100000-0xcfffffff] [ 0.757370] pnp 00:10: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.757420] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.757422] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved [ 0.757424] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.757426] system 00:10: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.757428] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.757521] pnp: PnP ACPI: found 17 devices [ 0.757523] ACPI: ACPI bus type pnp unregistered [ 0.759780] Switched to NOHz mode on CPU #0 [ 0.759826] Switched to NOHz mode on CPU #2 [ 0.759831] Switched to NOHz mode on CPU #1 [ 0.759837] Switched to NOHz mode on CPU #3 [ 0.763277] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff] [ 0.763280] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.763283] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.763285] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.763287] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.763289] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.763292] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff] [ 0.763294] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.763297] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.763299] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.763303] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff] [ 0.763306] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.763311] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.763313] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.763316] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.763319] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.763324] pci 0000:00:1c.5: PCI bridge to [bus 02-02] [ 0.763326] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.763330] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.763333] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.763337] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.763339] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.763343] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.763346] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.763359] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.763362] pci 0000:00:01.0: setting latency timer to 64 [ 0.763366] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.763370] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.763373] pci 0000:00:1c.0: setting latency timer to 64 [ 0.763378] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.763381] pci 0000:00:1c.4: setting latency timer to 64 [ 0.763385] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.763388] pci 0000:00:1c.5: setting latency timer to 64 [ 0.763392] pci 0000:00:1e.0: setting latency timer to 64 [ 0.763395] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.763397] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.763399] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.763400] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.763402] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff] [ 0.763404] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.763405] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff] [ 0.763407] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.763409] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.763410] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff] [ 0.763412] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.763414] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.763415] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.763417] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.763419] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.763421] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.763422] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.763424] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.763426] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.763427] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.763429] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.763430] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.763432] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.763434] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff] [ 0.763461] NET: Registered protocol family 2 [ 0.763570] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.764426] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.767051] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.767388] TCP: Hash tables configured (established 524288 bind 65536) [ 0.767390] TCP reno registered [ 0.767399] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.767430] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.767532] NET: Registered protocol family 1 [ 0.767697] pci 0000:01:00.0: Boot video device [ 0.767709] PCI: CLS 32 bytes, default 64 [ 0.767711] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.767713] Placing 64MB software IO TLB between ffff8800cbc00000 - ffff8800cfc00000 [ 0.767715] software IO TLB at phys 0xcbc00000 - 0xcfc00000 [ 0.768059] audit: initializing netlink socket (disabled) [ 0.768066] type=2000 audit(1340682396.750:1): initialized [ 0.778040] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.779382] VFS: Disk quotas dquot_6.5.2 [ 0.779420] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.779899] fuse init (API version 7.16) [ 0.779960] msgmni has been set to 7892 [ 0.780247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.780283] io scheduler noop registered [ 0.780285] io scheduler deadline registered [ 0.780316] io scheduler cfq registered (default) [ 0.780400] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.780423] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.780456] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.780484] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.780531] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.780559] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.780602] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.780631] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.780692] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.780710] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.780743] intel_idle: MWAIT substates: 0x20 [ 0.780744] intel_idle: does not run on family 6 model 23 [ 0.780827] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.780831] ACPI: Power Button [PWRB] [ 0.780865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.780868] ACPI: Power Button [PWRF] [ 0.780996] ACPI: acpi_idle registered with cpuidle [ 0.782376] ERST: Table is not found! [ 0.782423] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.802937] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.829135] Freeing initrd memory: 12856k freed [ 1.081804] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.082043] Linux agpgart interface v0.103 [ 1.082878] brd: module loaded [ 1.083248] loop: module loaded [ 1.083307] i2c-core: driver [adp5520] using legacy suspend method [ 1.083308] i2c-core: driver [adp5520] using legacy resume method [ 1.083375] ata_piix 0000:00:1f.2: version 2.13 [ 1.083390] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 1.083394] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.083422] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.083666] scsi0 : ata_piix [ 1.083756] scsi1 : ata_piix [ 1.084695] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 22 [ 1.084699] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 22 [ 1.084716] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 1.084720] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.084753] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.084937] scsi2 : ata_piix [ 1.085013] scsi3 : ata_piix [ 1.085726] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22 [ 1.085729] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22 [ 1.085775] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 1.085779] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.085806] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 1.085823] pata_acpi 0000:03:00.1: PCI INT B disabled [ 1.086035] Fixed MDIO Bus: probed [ 1.086055] PPP generic driver version 2.4.2 [ 1.086081] tun: Universal TUN/TAP device driver, 1.6 [ 1.086082] tun: (C) 1999-2004 Max Krasnyansky [ 1.086141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.086155] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.086180] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.086183] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.086213] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.086256] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.090135] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.090147] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 1.110017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.110151] hub 1-0:1.0: USB hub found [ 1.110155] hub 1-0:1.0: 6 ports detected [ 1.110212] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.110220] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.110223] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.110252] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.110291] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.114175] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.114185] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 1.130012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.130130] hub 2-0:1.0: USB hub found [ 1.130133] hub 2-0:1.0: 6 ports detected [ 1.130187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.130196] uhci_hcd: USB Universal Host Controller Interface driver [ 1.130230] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.130234] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.130237] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.130262] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.130302] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 [ 1.130383] hub 3-0:1.0: USB hub found [ 1.130386] hub 3-0:1.0: 2 ports detected [ 1.130435] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.130440] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.130442] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.130467] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.130507] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 [ 1.130587] hub 4-0:1.0: USB hub found [ 1.130590] hub 4-0:1.0: 2 ports detected [ 1.130636] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.130641] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.130643] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.130668] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.140040] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00 [ 1.140148] hub 5-0:1.0: USB hub found [ 1.140151] hub 5-0:1.0: 2 ports detected [ 1.140199] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.140204] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.140206] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.140233] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.140265] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 [ 1.140347] hub 6-0:1.0: USB hub found [ 1.140350] hub 6-0:1.0: 2 ports detected [ 1.140399] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.140404] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.140406] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.140432] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.140472] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 [ 1.140554] hub 7-0:1.0: USB hub found [ 1.140557] hub 7-0:1.0: 2 ports detected [ 1.140602] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.140607] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.140609] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.140635] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.140667] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 [ 1.140749] hub 8-0:1.0: USB hub found [ 1.140752] hub 8-0:1.0: 2 ports detected [ 1.140850] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.140851] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.141525] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.141591] mousedev: PS/2 mouse device common for all mice [ 1.141682] rtc_cmos 00:03: RTC can wake from S4 [ 1.141728] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.141748] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.141813] device-mapper: uevent: version 1.0.3 [ 1.141866] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.141967] device-mapper: multipath: version 1.2.0 loaded [ 1.141969] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.142116] cpuidle: using governor ladder [ 1.142117] cpuidle: using governor menu [ 1.142293] TCP cubic registered [ 1.142378] NET: Registered protocol family 10 [ 1.142721] NET: Registered protocol family 17 [ 1.142730] Registering the dns_resolver key type [ 1.143068] PM: Hibernation image not present or could not be loaded. [ 1.143077] registered taskstats version 1 [ 1.143309] Magic number: 0:505:766 [ 1.143374] rtc_cmos 00:03: setting system clock to 2012-06-26 03:46:37 UTC (1340682397) [ 1.143380] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.143382] EDD information not available. [ 1.161921] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.430023] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.440719] ata4: SATA link down (SStatus 0 SControl 300) [ 1.590049] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.610301] ata3.00: ATA-8: WDC WD1001FALS-40K1B0, 07.00K07, max UDMA/133 [ 1.610304] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.650345] ata3.00: configured for UDMA/133 [ 1.720019] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 1.760017] Refined TSC clocksource calibration: 3014.488 MHz. [ 1.760022] Switching to clocksource tsc [ 1.940056] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.940069] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.940175] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.940186] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.980182] ata2.00: ATAPI: ATAPI BD O DH4O1S, CP51, max UDMA/100 [ 1.980414] ata1.00: ATA-8: ST31000528AS, CC3E, max UDMA/133 [ 1.980417] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.980423] ata1.01: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100 [ 2.001046] ata2.01: ATA-7: WDC WD1600YS-01SHB1, 20.06C06, max UDMA/133 [ 2.001050] ata2.01: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.020305] ata1.00: configured for UDMA/133 [ 2.040156] ata2.00: configured for UDMA/100 [ 2.050012] usb 2-6: new high speed USB device using ehci_hcd and address 4 [ 2.060134] ata1.01: configured for UDMA/100 [ 2.060962] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC3E PQ: 0 ANSI: 5 [ 2.061088] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.061090] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.061132] sd 0:0:0:0: [sda] Write Protect is off [ 2.061134] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.061682] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.062280] scsi 0:0:1:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5 [ 2.065275] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.065278] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.065377] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 2.065417] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 2.080249] ata2.01: configured for UDMA/133 [ 2.082075] scsi 1:0:0:0: CD-ROM ATAPI BD O DH4O1S CP51 PQ: 0 ANSI: 5 [ 2.083588] sr1: scsi3-mmc drive: 1x/1x cd/rw xa/form2 cdda tray [ 2.083694] sr 1:0:0:0: Attached scsi CD-ROM sr1 [ 2.083733] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 2.084197] scsi 1:0:1:0: Direct-Access ATA WDC WD1600YS-01S 20.0 PQ: 0 ANSI: 5 [ 2.084305] sd 1:0:1:0: [sdb] 321672960 512-byte logical blocks: (164 GB/153 GiB) [ 2.084323] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 2.084344] sd 1:0:1:0: [sdb] Write Protect is off [ 2.084346] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.084371] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.084400] scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-4 07.0 PQ: 0 ANSI: 5 [ 2.084487] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 2.084541] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.084582] sd 2:0:0:0: [sdc] Write Protect is off [ 2.084584] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.084604] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.110641] sdb: sdb1 sdb2 < sdb5 > [ 2.110868] sd 1:0:1:0: [sdb] Attached SCSI disk [ 2.152379] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 2.152731] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.171107] sdc: sdc1 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 > [ 2.171440] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.172740] Freeing unused kernel memory: 960k freed [ 2.172901] Write protecting the kernel read-only data: 10240k [ 2.173418] Freeing unused kernel memory: 156k freed [ 2.177144] Freeing unused kernel memory: 1432k freed [ 2.189654] <30>udev[81]: starting version 167 [ 2.212388] sky2: driver version 1.28 [ 2.212416] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.212426] sky2 0000:02:00.0: setting latency timer to 64 [ 2.212450] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3 [ 2.212536] sky2 0000:02:00.0: irq 44 for MSI/MSI-X [ 2.224723] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.224757] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 2.232195] scsi4 : pata_jmicron [ 2.234353] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.234755] usbcore: registered new interface driver uas [ 2.235829] scsi5 : pata_jmicron [ 2.236228] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 2.236230] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 2.242258] ahci 0000:03:00.0: version 3.0 [ 2.242270] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.242708] sky2 0000:02:00.0: eth0: addr 00:1e:8c:94:0a:70 [ 2.246072] Initializing USB Mass Storage driver... [ 2.246396] scsi6 : usb-storage 2-3:1.0 [ 2.246478] usbcore: registered new interface driver usb-storage [ 2.246479] USB Mass Storage support registered. [ 2.246553] Floppy drive(s): fd0 is 1.44M [ 2.260090] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.260095] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.260101] ahci 0000:03:00.0: setting latency timer to 64 [ 2.260416] scsi7 : ahci [ 2.260497] scsi8 : ahci [ 2.260571] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16 [ 2.260574] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16 [ 2.263661] FDC 0 is a post-1991 82077 [ 2.290112] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 2.290146] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.290163] r8169 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.290188] r8169 0000:05:04.0: (unregistered net_device): no PCI Express capability [ 2.290561] r8169 0000:05:04.0: eth1: RTL8169sc/8110sc at 0xffffc9000065ec00, 00:1e:8c:94:09:4a, XID 18000000 IRQ 16 [ 2.450718] ata5.00: ATA-6: IC35L090AVV207-0, V23OA66A, max UDMA/100 [ 2.450721] ata5.00: 156250000 sectors, multi 0: LBA48 [ 2.462059] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 2.463223] ata5.01: ATA-7: WDC WD1200JB-00REA0, 20.00K20, max UDMA/100 [ 2.463225] ata5.01: 234441648 sectors, multi 0: LBA48 [ 2.480018] usb 8-1: new low speed USB device using uhci_hcd and address 2 [ 2.520851] ata5.00: configured for UDMA/100 [ 2.540777] ata5.01: configured for UDMA/100 [ 2.560107] scsi 4:0:0:0: Direct-Access ATA IC35L090AVV207-0 V23O PQ: 0 ANSI: 5 [ 2.560224] sd 4:0:0:0: [sdd] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.560248] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 2.560274] sd 4:0:0:0: [sdd] Write Protect is off [ 2.560277] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.560316] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.560327] scsi 4:0:1:0: Direct-Access ATA WDC WD1200JB-00R 20.0 PQ: 0 ANSI: 5 [ 2.560449] sd 4:0:1:0: Attached scsi generic sg6 type 0 [ 2.560495] sd 4:0:1:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.560587] sd 4:0:1:0: [sde] Write Protect is off [ 2.560590] sd 4:0:1:0: [sde] Mode Sense: 00 3a 00 00 [ 2.592342] sdd: sdd1 [ 2.592405] sd 4:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.592579] sd 4:0:0:0: [sdd] Attached SCSI disk [ 2.600033] ata8: SATA link down (SStatus 0 SControl 300) [ 2.603806] sde: sde1 < sde5 > [ 2.604013] sd 4:0:1:0: [sde] Attached SCSI disk [ 2.610041] ata7: SATA link down (SStatus 0 SControl 300) [ 2.790087] firewire_core: created device fw0: GUID 001e8c000021a239, S400 [ 3.240651] scsi 6:0:0:0: Direct-Access WD 10EAVS External 1.65 PQ: 0 ANSI: 4 [ 3.241198] sd 6:0:0:0: Attached scsi generic sg7 type 0 [ 3.241762] sd 6:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.242509] sd 6:0:0:0: [sdf] Write Protect is off [ 3.242512] sd 6:0:0:0: [sdf] Mode Sense: 21 00 00 00 [ 3.242514] sd 6:0:0:0: [sdf] Assuming drive cache: write through [ 3.243889] sd 6:0:0:0: [sdf] Assuming drive cache: write through [ 3.762766] sdf: sdf1 < sdf5 sdf6 sdf7 sdf8 sdf9 sdf10 > [ 3.764634] sd 6:0:0:0: [sdf] Assuming drive cache: write through [ 3.764637] sd 6:0:0:0: [sdf] Attached SCSI disk [ 23.343723] <30>udev[353]: starting version 167 [ 23.353703] lp: driver loaded but no devices found [ 23.409669] EDAC MC: Ver: 2.1.0 May 22 2012 [ 23.413299] EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV 0000:00:00.0 [ 23.413594] nvidia: module license 'NVIDIA' taints kernel. [ 23.413596] Disabling lock debugging due to kernel taint [ 23.423679] type=1400 audit(1340682419.771:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=495 comm="apparmor_parser" [ 23.423919] type=1400 audit(1340682419.771:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=472 comm="apparmor_parser" [ 23.424309] type=1400 audit(1340682419.771:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=495 comm="apparmor_parser" [ 23.424606] type=1400 audit(1340682419.771:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser" [ 23.424710] type=1400 audit(1340682419.771:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=495 comm="apparmor_parser" [ 23.425038] type=1400 audit(1340682419.771:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser" [ 23.545068] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 23.545112] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 23.545131] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 23.596490] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 23.596497] nvidia 0000:01:00.0: setting latency timer to 64 [ 23.596501] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 23.596682] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012 [ 23.620629] cfg80211: Calling CRDA to update world regulatory domain [ 23.675527] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 23.675530] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675532] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 23.675533] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675535] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 23.675537] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675538] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 23.675540] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675542] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 23.675544] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675545] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 23.675547] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675549] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 23.675550] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675552] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 23.675554] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675555] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 23.675557] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675559] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 23.675560] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675562] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 23.675564] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675565] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 23.675567] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675569] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 23.675571] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.675572] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 23.675574] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm) [ 23.679244] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 23.679687] Registered led device: rt2800usb-phy0::radio [ 23.679703] Registered led device: rt2800usb-phy0::assoc [ 23.679720] Registered led device: rt2800usb-phy0::quality [ 23.679996] usbcore: registered new interface driver rt2800usb [ 23.680594] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned. [ 23.683919] rtusb init ---> [ 23.683964] usbcore: registered new interface driver rt2870 [ 23.712764] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 23.712767] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712769] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 23.712771] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712773] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 23.712774] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712776] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 23.712778] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712779] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 23.712781] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712783] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 23.712785] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712786] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 23.712788] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712789] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 23.712791] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712793] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 23.712795] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712796] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 23.712798] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712800] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 23.712801] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712803] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 23.712805] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712806] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 23.712808] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712810] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 23.712812] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.712814] cfg80211: World regulatory domain updated: [ 23.712815] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.712817] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.712818] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.712820] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.712822] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.712824] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.800094] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10B6 [ 23.800319] usbcore: registered new interface driver usblp [ 23.931386] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,user_xattr [ 23.961437] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3 [ 23.961651] generic-usb 0003:045E:001E.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.2-1/input0 [ 23.961881] usbcore: registered new interface driver usbhid [ 23.961883] usbhid: USB HID core driver [ 24.326622] type=1400 audit(1340682420.671:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1065 comm="apparmor_parser" [ 24.327252] type=1400 audit(1340682420.671:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1065 comm="apparmor_parser" [ 24.327652] type=1400 audit(1340682420.671:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1065 comm="apparmor_parser" [ 24.329270] type=1400 audit(1340682420.671:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1064 comm="apparmor_parser" [ 24.550601] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.624693] sky2 0000:02:00.0: eth0: enabling interface [ 24.625086] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.630673] r8169 0000:05:04.0: eth1: link down [ 24.631006] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 24.726698] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90013080000, using 9024k, total 9024k [ 24.726701] vesafb: mode is 1920x1200x32, linelength=7680, pages=0 [ 24.726702] vesafb: scrolling: redraw [ 24.726704] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 24.726838] Console: switching to colour frame buffer device 240x75 [ 24.726867] fb0: VESA VGA frame buffer device [ 24.744639] ppdev: user-space parallel port driver [ 25.828109] usb 2-6: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 26.827551] NVRM: Your system is not currently configured to drive a VGA console [ 26.827553] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 26.827555] NVRM: requires the use of a text-mode VGA console. Use of other console [ 26.827557] NVRM: drivers including, but not limited to, vesafb, may result in [ 26.827558] NVRM: corruption and stability problems, and is not supported. [ 27.098030] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 27.098366] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.970993] vboxdrv: Found 4 processor cores. [ 29.971206] vboxdrv: fAsync=0 offMin=0x5c4 offMax=0x1207e [ 29.971540] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 29.971542] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000). [ 37.532802] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 37.870012] eth0: no IPv6 routers present [ 125.567414] EXT3-fs: barriers not enabled [ 125.571090] kjournald starting. Commit interval 5 seconds [ 125.571128] EXT3-fs (sdf8): warning: maximal mount count reached, running e2fsck is recommended [ 125.571547] EXT3-fs (sdf8): using internal journal [ 125.571550] EXT3-fs (sdf8): mounted filesystem with ordered data mode [ 125.665184] EXT3-fs: barriers not enabled [ 125.676849] kjournald starting. Commit interval 5 seconds [ 125.676878] EXT3-fs (sdf6): warning: maximal mount count reached, running e2fsck is recommended [ 125.677277] EXT3-fs (sdf6): using internal journal [ 125.677279] EXT3-fs (sdf6): mounted filesystem with ordered data mode [ 125.724031] EXT3-fs: barriers not enabled [ 125.735960] kjournald starting. Commit interval 5 seconds [ 125.735988] EXT3-fs (sdf5): warning: maximal mount count reached, running e2fsck is recommended [ 125.736412] EXT3-fs (sdf5): using internal journal [ 125.736416] EXT3-fs (sdf5): mounted filesystem with ordered data mode [ 125.767410] EXT3-fs: barriers not enabled [ 125.779831] kjournald starting. Commit interval 5 seconds [ 125.779867] EXT3-fs (sdf7): warning: maximal mount count reached, running e2fsck is recommended [ 125.780284] EXT3-fs (sdf7): using internal journal [ 125.780289] EXT3-fs (sdf7): mounted filesystem with ordered data mode [ 128.818007] EXT4-fs (sda10): warning: maximal mount count reached, running e2fsck is recommended [ 128.818468] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null) [ 130.318610] EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended [ 130.319074] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 131.601785] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended [ 131.602263] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 132.879457] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended [ 132.879922] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 134.151356] EXT4-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended [ 134.151827] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 135.370013] EXT3-fs: barriers not enabled [ 135.372420] kjournald starting. Commit interval 5 seconds [ 135.372438] EXT3-fs (sdd1): warning: maximal mount count reached, running e2fsck is recommended [ 135.372617] EXT3-fs (sdd1): using internal journal [ 135.372621] EXT3-fs (sdd1): mounted filesystem with ordered data mode [ 141.799244] EXT3-fs: barriers not enabled [ 141.800761] kjournald starting. Commit interval 5 seconds [ 141.800805] EXT3-fs (sdc5): warning: maximal mount count reached, running e2fsck is recommended [ 141.801047] EXT3-fs (sdc5): using internal journal [ 141.801051] EXT3-fs (sdc5): mounted filesystem with ordered data mode [ 143.421846] EXT3-fs: barriers not enabled [ 143.431497] kjournald starting. Commit interval 5 seconds [ 143.431545] EXT3-fs (sdc6): warning: maximal mount count reached, running e2fsck is recommended [ 143.431803] EXT3-fs (sdc6): using internal journal [ 143.431806] EXT3-fs (sdc6): mounted filesystem with ordered data mode [ 145.327799] EXT3-fs: barriers not enabled [ 145.330589] kjournald starting. Commit interval 5 seconds [ 145.330625] EXT3-fs (sdc7): warning: maximal mount count reached, running e2fsck is recommended [ 145.330854] EXT3-fs (sdc7): using internal journal [ 145.330858] EXT3-fs (sdc7): mounted filesystem with ordered data mode [ 146.798204] EXT3-fs: barriers not enabled [ 146.801158] kjournald starting. Commit interval 5 seconds [ 146.801202] EXT3-fs (sdc8): warning: maximal mount count reached, running e2fsck is recommended [ 146.801448] EXT3-fs (sdc8): using internal journal [ 146.801452] EXT3-fs (sdc8): mounted filesystem with ordered data mode [ 148.187147] EXT4-fs (sde5): mounted filesystem with ordered data mode. Opts: (null) [26692.120019] usb 2-3: reset high speed USB device using ehci_hcd and address 2 [50401.280014] TCP: Peer 2.80.74.228:40832/39463 unexpectedly shrunk window 4223709328:4223711537 (repaired)