[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-12-generic (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu6) ) #39-Ubuntu SMP Mon Oct 5 21:48:10 UTC 2009 (Ubuntu 2.6.31-12.39-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-12-generic root=UUID=c0370767-a452-461a-998d-246e7b97c049 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afed0000 (usable) [ 0.000000] BIOS-e820: 00000000afed0000 - 00000000afee5000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afee5000 - 00000000afee6000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afee6000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-protect [ 0.000000] E0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back [ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000140000000 aka 5120M [ 0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xafed0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000afed0000 (usable) [ 0.000000] modified: 00000000afed0000 - 00000000afee5000 (ACPI data) [ 0.000000] modified: 00000000afee5000 - 00000000afee6000 (ACPI NVS) [ 0.000000] modified: 00000000afee6000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000afed0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00afed0000 page 4k [ 0.000000] kernel direct mapping tables up to afed0000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] RAMDISK: 37961000 - 37fef191 [ 0.000000] ACPI: RSDP 00000000000f7f30 00024 (v03 HPQOEM) [ 0.000000] ACPI: XSDT 00000000afeddd0c 0005C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000afee49d3 000F4 (v03 HPQOEM SLIC-MPC 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 00000000afeddd68 06BF7 (v01 HPQOEM SLIC-MPC 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000afee5fc0 00040 [ 0.000000] ACPI: SLIC 00000000afee4ac7 00176 (v01 HPQOEM SLIC-MPC 06040000 HPQ 00000001) [ 0.000000] ACPI: MCFG 00000000afee4c3d 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 00000000afee4c79 00038 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 00000000afee4cb1 00072 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000afee4d23 00028 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000afee4d4b 002B5 (v01 HPQOEM SLIC-MP 06040000 00000150) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff] [ 0.000000] bootmap [0000000000011000 - 0000000000038fff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019d9bcc] TEXT DATA BSS ==> [0001000000 - 00019d9bcc] [ 0.000000] #3 [0037961000 - 0037fef191] RAMDISK ==> [0037961000 - 0037fef191] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [00019da000 - 00019da1cc] BRK ==> [00019da000 - 00019da1cc] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f7ff0] f7ff0 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000afed0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 982633 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 105 pages reserved [ 0.000000] DMA zone: 3832 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 702216 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000afed0000 - 00000000afee5000 [ 0.000000] PM: Registered nosave memory: 00000000afee5000 - 00000000afee6000 [ 0.000000] PM: Registered nosave memory: 00000000afee6000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000 [ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff880028022000, static data 89952 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 964608 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-12-generic root=UUID=c0370767-a452-461a-998d-246e7b97c049 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3791996k/5242880k available (5290k kernel code, 1312348k absent, 138536k reserved, 2997k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1999.743 MHz processor. [ 0.000030] spurious 8259A interrupt: IRQ7. [ 0.002800] Console: colour VGA+ 80x25 [ 0.002803] console [tty0] enabled [ 0.010000] allocated 39321600 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.48 BogoMIPS (lpj=19997400) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] tseg: 00aff00000 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] using C1E aware idle routine [ 0.010000] Performance Counters: AMD PMU driver. [ 0.010000] ... version: 0 [ 0.010000] ... bit width: 48 [ 0.010000] ... generic counters: 4 [ 0.010000] ... value mask: 0000ffffffffffff [ 0.010000] ... max period: 00007fffffffffff [ 0.010000] ... fixed-purpose counters: 0 [ 0.010000] ... counter mask: 000000000000000f [ 0.010000] ACPI: Core revision 20090521 [ 0.020078] Setting APIC routing to flat [ 0.020513] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.128173] CPU0: AMD Athlon Dual-Core QL-62 stepping 01 [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4000.13 BogoMIPS (lpj=20000672) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.280237] CPU1: AMD Athlon Dual-Core QL-62 stepping 01 [ 0.280249] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.290000] Measured 1131339261 cycles TSC warp between CPUs, turning off TSC clock. [ 0.290000] Marking TSC unstable due to check_tsc_sync_source failed [ 0.290014] Brought up 2 CPUs [ 0.290017] Total of 2 processors activated (7999.61 BogoMIPS). [ 0.290119] CPU0 attaching sched-domain: [ 0.290123] domain 0: span 0-1 level MC [ 0.290126] groups: 0 1 [ 0.290132] CPU1 attaching sched-domain: [ 0.290134] domain 0: span 0-1 level MC [ 0.290136] groups: 1 0 [ 0.290212] Booting paravirtualized kernel on bare hardware [ 0.290212] regulator: core version 0.5 [ 0.290212] Time: 23:58:05 Date: 10/06/09 [ 0.290212] NET: Registered protocol family 16 [ 0.290286] TOM: 00000000c0000000 aka 3072M [ 0.290289] Fam 10h mmconf [e0000000, efffffff] [ 0.290297] TOM2: 0000000140000000 aka 5120M [ 0.290307] ACPI: bus type pci registered [ 0.290388] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7 [ 0.290391] PCI: MCFG area at e0000000 reserved in E820 [ 0.290541] PCI: Using MMCONFIG at e0000000 - e07fffff [ 0.290543] PCI: Using configuration type 1 for base access [ 0.291357] bio: create slab at 0 [ 0.291357] ACPI: EC: Enabling special treatment for EC from MSI. [ 0.291357] ACPI: EC: Look up EC in DSDT [ 0.294173] ACPI: BIOS _OSI(Linux) query ignored [ 0.291357] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.321399] ACPI: Interpreter enabled [ 0.321399] ACPI: (supports S0 S3 S4 S5) [ 0.321399] ACPI: Using IOAPIC for interrupt routing [ 0.362442] ACPI: EC: GPE = 0x2a, I/O: command/status = 0x66, data = 0x62 [ 0.362445] ACPI: EC: driver started in interrupt mode [ 0.362706] ACPI: No dock devices found. [ 0.363048] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.363357] pci 0000:00:01.0: reg 10 io port: [0x1a00-0x1aff] [ 0.363413] pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf] [ 0.363429] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f] [ 0.363435] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f] [ 0.363461] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.363468] pci 0000:00:01.1: PME# disabled [ 0.363504] pci 0000:00:01.3: reg 10 32bit mmio: [0xc0080000-0xc00fffff] [ 0.363660] pci 0000:00:02.0: reg 10 32bit mmio: [0xc0006000-0xc0006fff] [ 0.363695] pci 0000:00:02.0: supports D1 D2 [ 0.363697] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.363701] pci 0000:00:02.0: PME# disabled [ 0.363734] pci 0000:00:02.1: reg 10 32bit mmio: [0xc0007000-0xc00070ff] [ 0.363775] pci 0000:00:02.1: supports D1 D2 [ 0.363777] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.363781] pci 0000:00:02.1: PME# disabled [ 0.363819] pci 0000:00:04.0: reg 10 32bit mmio: [0xc0008000-0xc0008fff] [ 0.363856] pci 0000:00:04.0: supports D1 D2 [ 0.363858] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.363863] pci 0000:00:04.0: PME# disabled [ 0.363896] pci 0000:00:04.1: reg 10 32bit mmio: [0xc0007400-0xc00074ff] [ 0.363937] pci 0000:00:04.1: supports D1 D2 [ 0.363939] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.363943] pci 0000:00:04.1: PME# disabled [ 0.363993] pci 0000:00:06.0: reg 20 io port: [0x30c0-0x30cf] [ 0.364050] pci 0000:00:07.0: reg 10 32bit mmio: [0xc0000000-0xc0003fff] [ 0.364091] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.370004] pci 0000:00:07.0: PME# disabled [ 0.370091] pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7] [ 0.370096] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7] [ 0.370101] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef] [ 0.370107] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3] [ 0.370112] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df] [ 0.370118] pci 0000:00:09.0: reg 24 32bit mmio: [0xc0004000-0xc0005fff] [ 0.370179] pci 0000:00:0a.0: reg 10 32bit mmio: [0xc0009000-0xc0009fff] [ 0.370185] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff] [ 0.370190] pci 0000:00:0a.0: reg 18 32bit mmio: [0xc0007c00-0xc0007cff] [ 0.370196] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xc0007800-0xc000780f] [ 0.370226] pci 0000:00:0a.0: supports D1 D2 [ 0.370229] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.370234] pci 0000:00:0a.0: PME# disabled [ 0.370286] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.370289] pci 0000:00:0b.0: PME# disabled [ 0.370528] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.370536] pci 0000:00:14.0: PME# disabled [ 0.370778] pci 0000:00:08.0: transparent bridge [ 0.370811] pci 0000:02:00.0: reg 10 32bit mmio: [0xc1000000-0xc1ffffff] [ 0.370820] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.370828] pci 0000:02:00.0: reg 1c 64bit mmio: [0xc4000000-0xc5ffffff] [ 0.370833] pci 0000:02:00.0: reg 24 io port: [0x4000-0x407f] [ 0.370839] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.370885] pci 0000:00:0b.0: bridge io port: [0x4000-0x4fff] [ 0.370889] pci 0000:00:0b.0: bridge 32bit mmio: [0xc1000000-0xc1ffffff] [ 0.370894] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xc4000000-0xdfffffff] [ 0.370949] pci 0000:07:00.0: reg 10 64bit mmio: [0xc2000000-0xc200ffff] [ 0.371083] pci 0000:00:14.0: bridge 32bit mmio: [0xc2000000-0xc20fffff] [ 0.371123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.371248] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.371358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.393003] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.393196] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.393386] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.393576] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.393766] ACPI: PCI Interrupt Link [Z012] (IRQs 19 20 21 22 23) *10 [ 0.393955] ACPI: PCI Interrupt Link [Z013] (IRQs 19 20 21 22 23) *0, disabled. [ 0.394145] ACPI: PCI Interrupt Link [Z014] (IRQs 19 20 21 22 23) *0, disabled. [ 0.394334] ACPI: PCI Interrupt Link [Z015] (IRQs 19 20 21 22 23) *0, disabled. [ 0.394524] ACPI: PCI Interrupt Link [LSMB] (IRQs 18) *10 [ 0.394711] ACPI: PCI Interrupt Link [LUS0] (IRQs 17) *11 [ 0.394898] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7 [ 0.395093] ACPI: PCI Interrupt Link [LMAC] (IRQs 19 20 21 22 23) *11 [ 0.395281] ACPI: PCI Interrupt Link [LAZA] (IRQs 19 20 21 22 23) *10 [ 0.395474] ACPI: PCI Interrupt Link [LGPU] (IRQs 19 20 21 22 23) *10 [ 0.395664] ACPI: PCI Interrupt Link [LPID] (IRQs 19 20 21 22 23) *0, disabled. [ 0.395853] ACPI: PCI Interrupt Link [LSI0] (IRQs 19 20 21 22 23) *11 [ 0.396042] ACPI: PCI Interrupt Link [LSI1] (IRQs 19 20 21 22 23) *0, disabled. [ 0.396231] ACPI: PCI Interrupt Link [Z010] (IRQs 16) *5 [ 0.396424] ACPI: PCI Interrupt Link [Z011] (IRQs 16) *10 [ 0.396611] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11 [ 0.396811] SCSI subsystem initialized [ 0.397121] libata version 3.00 loaded. [ 0.397121] usbcore: registered new interface driver usbfs [ 0.397121] usbcore: registered new interface driver hub [ 0.397121] usbcore: registered new device driver usb [ 0.397121] ACPI: WMI: Mapper loaded [ 0.397121] PCI: Using ACPI for IRQ routing [ 0.430008] Bluetooth: Core ver 2.15 [ 0.430657] NET: Registered protocol family 31 [ 0.430657] Bluetooth: HCI device and connection manager initialized [ 0.430657] Bluetooth: HCI socket layer initialized [ 0.430657] NetLabel: Initializing [ 0.430657] NetLabel: domain hash size = 128 [ 0.430657] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.430657] NetLabel: unlabeled traffic allowed by default [ 0.430657] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.430657] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.460015] Switched to high resolution mode on CPU 0 [ 0.460027] Switched to high resolution mode on CPU 1 [ 0.483034] pnp: PnP ACPI init [ 0.483056] ACPI: bus type pnp registered [ 0.491539] pnp: PnP ACPI: found 12 devices [ 0.491541] ACPI: ACPI bus type pnp unregistered [ 0.491554] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved [ 0.491561] system 00:03: ioport range 0x360-0x361 has been reserved [ 0.491565] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.491568] system 00:03: iomem range 0xff800000-0xff800fff has been reserved [ 0.491575] system 00:0a: ioport range 0x1000-0x107f has been reserved [ 0.491579] system 00:0a: ioport range 0x1080-0x10ff has been reserved [ 0.491582] system 00:0a: ioport range 0x1200-0x127f has been reserved [ 0.491585] system 00:0a: ioport range 0x1280-0x12ff has been reserved [ 0.491588] system 00:0a: ioport range 0x1400-0x147f has been reserved [ 0.491591] system 00:0a: ioport range 0x1480-0x14ff has been reserved [ 0.491597] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.491601] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.491604] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.491608] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.491611] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved [ 0.496313] AppArmor: AppArmor Filesystem Enabled [ 0.496366] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.496369] pci 0000:00:08.0: IO window: disabled [ 0.496374] pci 0000:00:08.0: MEM window: disabled [ 0.496378] pci 0000:00:08.0: PREFETCH window: disabled [ 0.496386] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.496389] pci 0000:00:0b.0: IO window: 0x4000-0x4fff [ 0.496394] pci 0000:00:0b.0: MEM window: 0xc1000000-0xc1ffffff [ 0.496399] pci 0000:00:0b.0: PREFETCH window: 0x000000c4000000-0x000000dfffffff [ 0.496636] pci 0000:00:14.0: PCI bridge, secondary bus 0000:07 [ 0.496638] pci 0000:00:14.0: IO window: disabled [ 0.496650] pci 0000:00:14.0: MEM window: 0xc2000000-0xc20fffff [ 0.496658] pci 0000:00:14.0: PREFETCH window: disabled [ 0.496673] pci 0000:00:08.0: setting latency timer to 64 [ 0.496680] pci 0000:00:0b.0: setting latency timer to 64 [ 0.497036] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 23 [ 0.497040] alloc irq_desc for 23 on node -1 [ 0.497043] alloc kstat_irqs on node -1 [ 0.497053] pci 0000:00:14.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23 [ 0.497062] pci 0000:00:14.0: setting latency timer to 64 [ 0.497070] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.497073] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.497076] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.497079] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.497082] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] [ 0.497084] pci_bus 0000:02: resource 1 mem: [0xc1000000-0xc1ffffff] [ 0.497087] pci_bus 0000:02: resource 2 pref mem [0xc4000000-0xdfffffff] [ 0.497090] pci_bus 0000:07: resource 1 mem: [0xc2000000-0xc20fffff] [ 0.497135] NET: Registered protocol family 2 [ 0.497348] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.499259] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.504239] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.504825] TCP: Hash tables configured (established 524288 bind 65536) [ 0.504829] TCP reno registered [ 0.504939] NET: Registered protocol family 1 [ 0.505019] Trying to unpack rootfs image as initramfs... [ 0.675561] Freeing initrd memory: 6712k freed [ 0.679483] Simple Boot Flag at 0x38 set to 0x1 [ 0.679628] Scanning for low memory corruption every 60 seconds [ 0.679790] audit: initializing netlink socket (disabled) [ 0.679806] type=2000 audit(1254873484.670:1): initialized [ 0.689394] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.690948] VFS: Disk quotas dquot_6.5.2 [ 0.691008] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.691679] fuse init (API version 7.12) [ 0.691766] msgmni has been set to 7419 [ 0.692059] alg: No test for stdrng (krng) [ 0.692075] io scheduler noop registered [ 0.692078] io scheduler anticipatory registered [ 0.692080] io scheduler deadline registered [ 0.692124] io scheduler cfq registered (default) [ 0.692372] pci 0000:00:07.0: Enabling HT MSI Mapping [ 0.692497] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.692650] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.692795] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.692941] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.693020] pci 0000:02:00.0: Boot video device [ 0.693359] alloc irq_desc for 24 on node -1 [ 0.693362] alloc kstat_irqs on node -1 [ 0.693384] pcieport-driver 0000:00:14.0: irq 24 for MSI/MSI-X [ 0.693407] pcieport-driver 0000:00:14.0: setting latency timer to 64 [ 0.693583] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.693607] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.696800] ACPI: AC Adapter [ADP1] (on-line) [ 0.696870] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.696874] ACPI: Power Button [PWRF] [ 0.696932] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.700370] ACPI: Lid Switch [LID0] [ 0.700417] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.700423] ACPI: Sleep Button [SLPB] [ 0.700484] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 0.700487] ACPI: Power Button [PWRB] [ 0.700785] processor LNXCPU:00: registered as cooling_device0 [ 0.700824] processor LNXCPU:01: registered as cooling_device1 [ 0.741853] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.741861] ACPI: Thermal Zone [TZS0] (63 C) [ 0.755130] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.755138] ACPI: Thermal Zone [TZS1] (62 C) [ 0.756468] Linux agpgart interface v0.103 [ 0.756480] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.757668] brd: module loaded [ 0.758120] loop: module loaded [ 0.758209] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.758300] ahci 0000:00:09.0: version 3.0 [ 0.758661] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22 [ 0.758667] alloc irq_desc for 22 on node -1 [ 0.758670] alloc kstat_irqs on node -1 [ 0.758682] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22 [ 0.758725] alloc irq_desc for 25 on node -1 [ 0.758727] alloc kstat_irqs on node -1 [ 0.758736] ahci 0000:00:09.0: irq 25 for MSI/MSI-X [ 0.758783] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl IDE mode [ 0.758787] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part [ 0.758791] ahci 0000:00:09.0: setting latency timer to 64 [ 0.759032] scsi0 : ahci [ 0.759747] scsi1 : ahci [ 0.759832] ata1: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004100 irq 25 [ 0.759835] ata2: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004180 irq 25 [ 0.760181] pata_amd 0000:00:06.0: version 0.4.1 [ 0.760225] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.760556] scsi2 : pata_amd [ 0.760642] scsi3 : pata_amd [ 0.760675] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 0.760678] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 0.761456] Fixed MDIO Bus: probed [ 0.761496] PPP generic driver version 2.4.2 [ 0.761615] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.762083] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17 [ 0.762088] alloc irq_desc for 17 on node -1 [ 0.762091] alloc kstat_irqs on node -1 [ 0.762101] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17 [ 0.762119] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.762122] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.762183] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.762218] ehci_hcd 0000:00:02.1: debug port 1 [ 0.762224] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.762246] ehci_hcd 0000:00:02.1: irq 17, io mem 0xc0007000 [ 0.780413] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.780495] usb usb1: configuration #1 chosen from 1 choice [ 0.780531] hub 1-0:1.0: USB hub found [ 0.780541] hub 1-0:1.0: 3 ports detected [ 0.780949] ACPI: PCI Interrupt Link [Z011] enabled at IRQ 16 [ 0.780953] alloc irq_desc for 16 on node -1 [ 0.780955] alloc kstat_irqs on node -1 [ 0.780963] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z011] -> GSI 16 (level, low) -> IRQ 16 [ 0.780974] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.780977] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.781019] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.781050] ehci_hcd 0000:00:04.1: debug port 1 [ 0.781055] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.781077] ehci_hcd 0000:00:04.1: irq 16, io mem 0xc0007400 [ 0.802804] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.802866] usb usb2: configuration #1 chosen from 1 choice [ 0.802896] hub 2-0:1.0: USB hub found [ 0.802903] hub 2-0:1.0: 4 ports detected [ 0.802958] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.803333] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17 [ 0.803336] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17 [ 0.803347] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.803350] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.803383] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.803398] ohci_hcd 0000:00:02.0: irq 17, io mem 0xc0006000 [ 0.864842] usb usb3: configuration #1 chosen from 1 choice [ 0.864869] hub 3-0:1.0: USB hub found [ 0.864879] hub 3-0:1.0: 3 ports detected [ 0.865241] ACPI: PCI Interrupt Link [Z010] enabled at IRQ 16 [ 0.865245] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z010] -> GSI 16 (level, low) -> IRQ 16 [ 0.865258] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.865261] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.865294] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.865307] ohci_hcd 0000:00:04.0: irq 16, io mem 0xc0008000 [ 0.898187] ACPI: Battery Slot [BAT0] (battery present) [ 0.924907] usb usb4: configuration #1 chosen from 1 choice [ 0.924933] hub 4-0:1.0: USB hub found [ 0.924942] hub 4-0:1.0: 4 ports detected [ 0.925005] uhci_hcd: USB Universal Host Controller Interface driver [ 0.925131] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.945965] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.959277] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.959284] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.959287] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.959291] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.959294] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.959367] mice: PS/2 mouse device common for all mice [ 0.959511] rtc_cmos 00:06: RTC can wake from S4 [ 0.959554] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.959612] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.959715] device-mapper: uevent: version 1.0.3 [ 0.960184] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.960305] device-mapper: multipath: version 1.1.0 loaded [ 0.960309] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.960539] cpuidle: using governor ladder [ 0.960541] cpuidle: using governor menu [ 0.960987] TCP cubic registered [ 0.961120] NET: Registered protocol family 10 [ 0.961608] lo: Disabled Privacy Extensions [ 0.961894] NET: Registered protocol family 17 [ 0.961917] Bluetooth: L2CAP ver 2.13 [ 0.961918] Bluetooth: L2CAP socket layer initialized [ 0.961922] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.961924] Bluetooth: SCO socket layer initialized [ 0.962457] Bluetooth: RFCOMM TTY layer initialized [ 0.962460] Bluetooth: RFCOMM socket layer initialized [ 0.962462] Bluetooth: RFCOMM ver 1.11 [ 0.962470] powernow-k8: Found 1 AMD Athlon Dual-Core QL-62 processors (2 cpu cores) (version 2.20.00) [ 0.962534] powernow-k8: 0 : pstate 0 (2000 MHz) [ 0.962536] powernow-k8: 1 : pstate 1 (1000 MHz) [ 0.963168] PM: Resume from disk failed. [ 0.963182] registered taskstats version 1 [ 0.963386] Magic number: 13:358:1009 [ 0.963527] rtc_cmos 00:06: setting system clock to 2009-10-06 23:58:06 UTC (1254873486) [ 0.963531] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.963533] EDD information not available. [ 0.986342] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.002830] Clocksource tsc unstable (delta = 4397480833081 ns) [ 1.190024] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.290119] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.290135] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.311245] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L633M, A0A0, max UDMA/100 [ 1.332309] ata1.00: configured for UDMA/100 [ 1.338028] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633M A0A0 PQ: 0 ANSI: 5 [ 1.352868] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.352872] Uniform CD-ROM driver Revision: 3.20 [ 1.352973] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.353028] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.354341] usb 1-1: configuration #1 chosen from 1 choice [ 1.366375] ata2.00: ATA-8: ST9160411AS, SD13, max UDMA/133 [ 1.366378] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.410979] ata2.00: configured for UDMA/133 [ 1.411059] scsi 1:0:0:0: Direct-Access ATA ST9160411AS SD13 PQ: 0 ANSI: 5 [ 1.411165] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.411212] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.411260] sd 1:0:0:0: [sda] Write Protect is off [ 1.411263] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.411287] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.411420] sda: [ 1.411506] ata4: port disabled. ignoring. [ 1.421042] sda1 sda2 sda3 < sda5 > [ 1.440606] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.440638] Freeing unused kernel memory: 660k freed [ 1.440994] Write protecting the kernel read-only data: 7544k [ 1.717004] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.717393] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 1.717400] alloc irq_desc for 21 on node -1 [ 1.717402] alloc kstat_irqs on node -1 [ 1.717415] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 1.717421] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.756635] usb 4-4: new low speed USB device using ohci_hcd and address 2 [ 1.789577] Initializing USB Mass Storage driver... [ 1.791689] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.791841] usbcore: registered new interface driver usb-storage [ 1.791845] USB Mass Storage support registered. [ 1.791989] usb-storage: device found at 2 [ 1.791991] usb-storage: waiting for device to settle before scanning [ 2.000965] usb 4-4: configuration #1 chosen from 1 choice [ 2.009835] usbcore: registered new interface driver hiddev [ 2.021371] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.0/input/input6 [ 2.021466] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:04.0-4/input0 [ 2.021490] usbcore: registered new interface driver usbhid [ 2.021494] usbhid: v2.6:USB HID core driver [ 2.241206] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:16:68:3e:1c [ 2.241212] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc-v3 [ 2.375917] PM: Starting manual resume from disk [ 2.375922] PM: Resume from partition 8:5 [ 2.375924] PM: Checking hibernation image. [ 2.376194] PM: Resume from disk failed. [ 2.410899] EXT4-fs (sda2): barriers enabled [ 2.426025] kjournald2 starting: pid 371, dev sda2:8, commit interval 5 seconds [ 2.426041] EXT4-fs (sda2): delayed allocation enabled [ 2.426044] EXT4-fs: file extents enabled [ 2.431868] EXT4-fs: mballoc enabled [ 2.431886] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 3.480047] type=1505 audit(1254873489.009:2): operation="profile_load" pid=392 name=/usr/share/gdm/guest-session/Xsession [ 3.483119] type=1505 audit(1254873489.017:3): operation="profile_load" pid=393 name=/sbin/dhclient3 [ 3.483411] type=1505 audit(1254873489.017:4): operation="profile_load" pid=393 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.483584] type=1505 audit(1254873489.017:5): operation="profile_load" pid=393 name=/usr/lib/connman/scripts/dhclient-script [ 3.535449] type=1505 audit(1254873489.069:6): operation="profile_load" pid=394 name=/usr/bin/evince [ 3.539634] type=1505 audit(1254873489.069:7): operation="profile_load" pid=394 name=/usr/bin/evince-previewer [ 3.542182] type=1505 audit(1254873489.069:8): operation="profile_load" pid=394 name=/usr/bin/evince-thumbnailer [ 3.556200] type=1505 audit(1254873489.089:9): operation="profile_load" pid=396 name=/usr/lib/cups/backend/cups-pdf [ 4.892729] udev: starting version 147 [ 5.596678] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.757947] EDAC MC: Ver: 2.1.0 Oct 5 2009 [ 5.766799] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 5.766826] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 5.853544] lp: driver loaded but no devices found [ 5.963482] acpi device:13: registered as cooling_device2 [ 5.963658] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/device:11/input/input7 [ 5.963707] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 6.002627] cfg80211: Calling CRDA to update world regulatory domain [ 6.483729] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000 [ 6.550163] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8 [ 6.691131] nvidia: module license 'NVIDIA' taints kernel. [ 6.691137] Disabling lock debugging due to kernel taint [ 6.759334] EDAC amd64_edac: Ver: 3.2.0 Oct 5 2009 [ 6.759403] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 6.759407] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 6.759410] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 6.759412] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 6.759413] Might be a BIOS bug, if BIOS says ECC is enabled [ 6.759415] Use of the override can cause unknown side effects. [ 6.759424] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 6.830334] usb-storage: device scan complete [ 6.911941] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 6.912428] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 6.915601] cfg80211: World regulatory domain updated: [ 6.915607] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.915610] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.915613] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.915616] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.915619] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.915621] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.931317] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 6.947618] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 20 [ 6.947626] alloc irq_desc for 20 on node -1 [ 6.947629] alloc kstat_irqs on node -1 [ 6.947642] nvidia 0000:02:00.0: PCI INT A -> Link[LGPU] -> GSI 20 (level, low) -> IRQ 20 [ 6.947651] nvidia 0000:02:00.0: setting latency timer to 64 [ 6.947899] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 6.959440] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.206674] ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23 [ 7.206689] ath5k 0000:07:00.0: setting latency timer to 64 [ 7.206737] ath5k 0000:07:00.0: registered as 'phy0' [ 7.296688] ath: EEPROM regdomain: 0x64 [ 7.296690] ath: EEPROM indicates we should expect a direct regpair map [ 7.296695] ath: Country alpha2 being used: 00 [ 7.296697] ath: Regpair used: 0x64 [ 7.369874] phy0: Selected rate control algorithm 'minstrel' [ 7.370607] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 7.559421] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 19 [ 7.559429] alloc irq_desc for 19 on node -1 [ 7.559432] alloc kstat_irqs on node -1 [ 7.559445] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 19 (level, low) -> IRQ 19 [ 7.559498] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 7.961649] Adding 5855652k swap on /dev/sda5. Priority:-1 extents:1 across:5855652k [ 8.135122] EXT4-fs (sda2): internal journal on sda2:8 [ 9.322664] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9 [ 9.322762] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input10 [ 9.322840] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input11 [ 9.894258] __ratelimit: 6 callbacks suppressed [ 9.894262] type=1505 audit(1254887895.428:12): operation="profile_replace" pid=823 name=/usr/share/gdm/guest-session/Xsession [ 9.896587] type=1505 audit(1254887895.428:13): operation="profile_replace" pid=824 name=/sbin/dhclient3 [ 9.896885] type=1505 audit(1254887895.428:14): operation="profile_replace" pid=824 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 9.897061] type=1505 audit(1254887895.428:15): operation="profile_replace" pid=824 name=/usr/lib/connman/scripts/dhclient-script [ 9.901986] type=1505 audit(1254887895.428:16): operation="profile_replace" pid=825 name=/usr/bin/evince [ 9.906209] type=1505 audit(1254887895.438:17): operation="profile_replace" pid=825 name=/usr/bin/evince-previewer [ 9.908782] type=1505 audit(1254887895.438:18): operation="profile_replace" pid=825 name=/usr/bin/evince-thumbnailer [ 9.915438] type=1505 audit(1254887895.448:19): operation="profile_replace" pid=828 name=/usr/lib/cups/backend/cups-pdf [ 9.915821] type=1505 audit(1254887895.448:20): operation="profile_replace" pid=828 name=/usr/sbin/cupsd [ 9.918333] type=1505 audit(1254887895.448:21): operation="profile_replace" pid=829 name=/usr/sbin/tcpdump [ 13.779929] alloc irq_desc for 26 on node -1 [ 13.779934] alloc kstat_irqs on node -1 [ 13.779947] forcedeth 0000:00:0a.0: irq 26 for MSI/MSI-X [ 14.075194] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.777487] ppdev: user-space parallel port driver [ 24.652521] eth0: no IPv6 routers present