[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-17-generic (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 1 13:57:17 UTC 2008 (Ubuntu 2.6.24-17.31-generic) [ 0.000000] Command line: root=UUID=51f92c79-944c-41b0-a458-6c643c10a998 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ef0000 (usable) [ 0.000000] BIOS-e820: 0000000077ef0000 - 0000000077ef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077ef3000 - 0000000077f00000 (ACPI data) [ 0.000000] BIOS-e820: 0000000078000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 491248) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7570 checksum 0 [ 0.000000] ACPI: RSDP 000F7570, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT 77EF30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 77EFB480, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 77EF3240, 81E6 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 77EF0000, 0040 [ 0.000000] ACPI: SSDT 77EFB680, 0115 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: MCFG 77EFB880, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 77EFB5C0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 1 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000077ef0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 491248) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000077ef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 491248 [ 0.000000] On node 0 totalpages: 491151 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1220 pages reserved [ 0.000000] DMA zone: 2723 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6660 pages used for memmap [ 0.000000] DMA32 zone: 480492 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 483215 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=51f92c79-944c-41b0-a458-6c643c10a998 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 21.457503] time.c: Detected 2420.232 MHz processor. [ 21.460397] Console: colour VGA+ 80x25 [ 21.460399] console [tty0] enabled [ 21.460412] Checking aperture... [ 21.460415] CPU 0: aperture @ f9fa000000 size 32 MB [ 21.460416] Aperture too small (32 MB) [ 21.466845] No AGP bridge found [ 21.480161] Memory: 1925012k/1964992k available (2488k kernel code, 39592k reserved, 1319k data, 320k init) [ 21.480192] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 21.559470] Calibrating delay using timer specific routine.. 4844.66 BogoMIPS (lpj=9689338) [ 21.559498] Security Framework initialized [ 21.559503] SELinux: Disabled at boot. [ 21.559514] AppArmor: AppArmor initialized [ 21.559518] Failure registering capabilities with primary security module. [ 21.559655] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 21.560576] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 21.561011] Mount-cache hash table entries: 256 [ 21.561117] Initializing cgroup subsys ns [ 21.561121] Initializing cgroup subsys cpuacct [ 21.561131] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 21.561133] CPU: L2 Cache: 512K (64 bytes/line) [ 21.561135] CPU 0/0 -> Node 0 [ 21.561156] SMP alternatives: switching to UP code [ 21.561658] Early unpacking initramfs... done [ 21.817551] ACPI: Core revision 20070126 [ 21.817606] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.862076] Using local APIC timer interrupts. [ 21.903388] APIC timer calibration result 13751321 [ 21.903389] Detected 13.751 MHz APIC timer. [ 21.903436] Brought up 1 CPUs [ 21.903543] CPU0 attaching sched-domain: [ 21.903545] domain 0: span 01 [ 21.903546] groups: 01 [ 21.903672] net_namespace: 120 bytes [ 21.904005] Time: 5:26:54 Date: 05/25/08 [ 21.904030] NET: Registered protocol family 16 [ 21.904169] ACPI: bus type pci registered [ 21.904223] PCI: Using configuration type 1 [ 21.905612] ACPI: EC: Look up EC in DSDT [ 21.912856] ACPI: Interpreter enabled [ 21.912859] ACPI: (supports S0 S1 S3 S4 S5) [ 21.912869] ACPI: Using IOAPIC for interrupt routing [ 21.923832] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 21.924864] PCI: Transparent bridge - 0000:00:10.0 [ 21.924880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 21.925153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 21.993654] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15) [ 21.993842] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.994028] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.994213] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.994400] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.994586] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.994772] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15) [ 21.994957] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.995143] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.995329] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.995517] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.995703] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.995890] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 21.996082] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.996268] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.996453] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.996639] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.996825] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 21.997012] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 21.997198] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) [ 21.997421] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 21.997633] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 21.997845] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 21.998056] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 21.998267] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 21.998479] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 21.998691] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 21.998902] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 21.999113] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 21.999329] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 21.999548] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 21.999760] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 21.999971] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 22.000183] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 22.000394] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 22.000606] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 22.000817] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 22.001029] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 22.001241] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 22.001452] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 22.001663] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 22.001780] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.001801] pnp: PnP ACPI init [ 22.001808] ACPI: bus type pnp registered [ 22.008277] pnpacpi: exceeded the max number of mem resources: 12 [ 22.008376] pnp: PnP ACPI: found 15 devices [ 22.008378] ACPI: ACPI bus type pnp unregistered [ 22.008561] PCI: Using ACPI for IRQ routing [ 22.008564] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.023390] NET: Registered protocol family 8 [ 22.023392] NET: Registered protocol family 20 [ 22.023491] AppArmor: AppArmor Filesystem Enabled [ 22.027375] Time: tsc clocksource has been installed. [ 22.035400] system 00:01: ioport range 0x4000-0x407f has been reserved [ 22.035403] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 22.035405] system 00:01: ioport range 0x4400-0x447f has been reserved [ 22.035407] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 22.035410] system 00:01: ioport range 0x4800-0x487f has been reserved [ 22.035412] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 22.035414] system 00:01: ioport range 0x2000-0x207f has been reserved [ 22.035419] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 22.035422] system 00:01: iomem range 0x78000000-0x7fffffff could not be reserved [ 22.035427] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 22.035429] system 00:02: ioport range 0x800-0x87f has been reserved [ 22.035432] system 00:02: ioport range 0x290-0x297 has been reserved [ 22.035442] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved [ 22.035447] system 00:0e: iomem range 0xf0000-0xf3fff could not be reserved [ 22.035450] system 00:0e: iomem range 0xf4000-0xf7fff could not be reserved [ 22.035452] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved [ 22.035455] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved [ 22.035457] system 00:0e: iomem range 0xfefff000-0xfefff0ff has been reserved [ 22.035460] system 00:0e: iomem range 0x77ef0000-0x77efffff could not be reserved [ 22.035462] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved [ 22.035465] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 22.035467] system 00:0e: iomem range 0x100000-0x77eeffff could not be reserved [ 22.035470] system 00:0e: iomem range 0x77f00000-0x7fefffff could not be reserved [ 22.035472] system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved [ 22.035475] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved [ 22.035778] PCI: Bridge: 0000:00:02.0 [ 22.035780] IO window: a000-afff [ 22.035783] MEM window: fd900000-fd9fffff [ 22.035784] PREFETCH window: fd800000-fd8fffff [ 22.035786] PCI: Bridge: 0000:00:03.0 [ 22.035788] IO window: 8000-8fff [ 22.035790] MEM window: fde00000-fdefffff [ 22.035791] PREFETCH window: fdd00000-fddfffff [ 22.035793] PCI: Bridge: 0000:00:04.0 [ 22.035794] IO window: b000-bfff [ 22.035796] MEM window: fdc00000-fdcfffff [ 22.035798] PREFETCH window: fda00000-fdafffff [ 22.035801] PCI: Bridge: 0000:00:10.0 [ 22.035803] IO window: 9000-9fff [ 22.035805] MEM window: f8000000-fbffffff [ 22.035807] PREFETCH window: fdb00000-fdbfffff [ 22.035819] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 22.035825] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 22.035830] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 22.035836] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 22.035845] NET: Registered protocol family 2 [ 22.071448] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 22.072070] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 22.073760] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 22.074230] TCP: Hash tables configured (established 262144 bind 65536) [ 22.074233] TCP reno registered [ 22.083478] checking if image is initramfs... it is [ 22.539260] Switched to high resolution mode on CPU 0 [ 22.628579] Freeing initrd memory: 7641k freed [ 22.632521] audit: initializing netlink socket (disabled) [ 22.632531] audit(1211693214.144:1): initialized [ 22.633994] VFS: Disk quotas dquot_6.5.1 [ 22.634052] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 22.634153] io scheduler noop registered [ 22.634154] io scheduler anticipatory registered [ 22.634156] io scheduler deadline registered [ 22.634230] io scheduler cfq registered (default) [ 22.634243] Boot video device is 0000:00:05.0 [ 22.647531] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 22.647548] assign_interrupt_mode Found MSI capability [ 22.647563] Allocate Port Service[0000:00:02.0:pcie00] [ 22.647610] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 22.647626] assign_interrupt_mode Found MSI capability [ 22.647638] Allocate Port Service[0000:00:03.0:pcie00] [ 22.647678] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 22.647694] assign_interrupt_mode Found MSI capability [ 22.647706] Allocate Port Service[0000:00:04.0:pcie00] [ 22.669488] Real Time Clock Driver v1.12ac [ 22.669566] Linux agpgart interface v0.102 [ 22.669569] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.669687] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.669812] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 22.670228] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.670457] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 22.671006] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.671057] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 22.671155] PNP: No PS/2 controller found. Probing ports directly. [ 22.671488] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.671491] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.679323] mice: PS/2 mouse device common for all mice [ 22.679351] cpuidle: using governor ladder [ 22.679352] cpuidle: using governor menu [ 22.679466] NET: Registered protocol family 1 [ 22.679543] registered taskstats version 1 [ 22.679670] Magic number: 8:773:416 [ 22.679794] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 22.679797] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 22.679799] EDD information not available. [ 22.679806] Freeing unused kernel memory: 320k freed [ 23.851328] fuse init (API version 7.9) [ 23.864041] ACPI: Fan [FAN] (on) [ 23.868634] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 23.870001] ACPI: Thermal Zone [THRM] (40 C) [ 24.706104] usbcore: registered new interface driver usbfs [ 24.706122] usbcore: registered new interface driver hub [ 24.714410] usbcore: registered new device driver usb [ 24.729553] SCSI subsystem initialized [ 24.738643] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 24.739039] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 24.739049] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 24.739131] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 24.739138] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 24.739361] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 24.739381] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000 [ 24.782587] libata version 3.00 loaded. [ 24.796686] usb usb1: configuration #1 chosen from 1 choice [ 24.796704] hub 1-0:1.0: USB hub found [ 24.796712] hub 1-0:1.0: 8 ports detected [ 24.805473] Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 24.899109] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 24.899121] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 24.899203] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 24.899209] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 24.899256] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 24.899283] ehci_hcd 0000:00:0b.1: debug port 1 [ 24.899286] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 24.899296] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000 [ 24.910934] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.911029] usb usb2: configuration #1 chosen from 1 choice [ 24.911049] hub 2-0:1.0: USB hub found [ 24.911054] hub 2-0:1.0: 8 ports detected [ 24.918663] Floppy drive(s): fd0 is 1.44M [ 24.942372] FDC 0 is a post-1991 82077 [ 25.015052] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 25.015063] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 [ 25.015494] tulip0: MII transceiver #1 config 3000 status 7829 advertising 01e1. [ 25.019021] eth0: Lite-On 82c168 PNIC rev 32 at Port 0x9c00, 00:a0:cc:d5:be:fa, IRQ 16. [ 25.021415] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 25.021427] ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 25.071588] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 25.073755] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 25.074125] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 25.074134] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 [ 25.074149] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 25.074155] ACPI: PCI interrupt for device 0000:00:0e.0 disabled [ 25.074465] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 [ 25.074471] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 25.074497] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 25.074502] ACPI: PCI interrupt for device 0000:00:0f.0 disabled [ 25.081042] pata_amd 0000:00:0d.0: version 0.3.10 [ 25.081083] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 25.085494] scsi0 : pata_amd [ 25.088047] scsi1 : pata_amd [ 25.088643] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14 [ 25.088645] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15 [ 25.470400] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 25.570632] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB06, max UDMA/33 [ 25.570646] ata1.01: ATAPI: Optiarc DVD RW AD-7203A, 1.05, max UDMA/66 [ 25.605467] usb 2-1: configuration #1 chosen from 1 choice [ 25.605807] hub 2-1:1.0: USB hub found [ 25.606183] hub 2-1:1.0: 4 ports detected [ 25.742522] ata1.00: configured for UDMA/33 [ 25.914481] ata1.01: configured for UDMA/66 [ 25.950232] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 26.082179] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB06 PQ: 0 ANSI: 5 [ 26.085110] usb 2-2: configuration #1 chosen from 1 choice [ 26.085865] scsi 0:0:1:0: CD-ROM Optiarc DVD RW AD-7203A 1.05 PQ: 0 ANSI: 5 [ 26.086037] sata_nv 0000:00:0e.0: version 3.5 [ 26.086049] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 [ 26.086163] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 26.086470] scsi2 : sata_nv [ 26.087125] scsi3 : sata_nv [ 26.087323] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 21 [ 26.087326] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21 [ 26.098232] Driver 'sr' needs updating - please use bus_type methods [ 26.106552] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 26.106557] Uniform CD-ROM driver Revision: 3.20 [ 26.106601] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 26.113636] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 26.113677] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 26.119803] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 26.119819] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 26.286385] usb 2-1.1: new low speed USB device using ehci_hcd and address 4 [ 26.350203] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000f1fc55] [ 26.384803] usb 2-1.1: configuration #1 chosen from 1 choice [ 26.403447] usbcore: registered new interface driver hiddev [ 26.406902] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input1 [ 26.418140] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.1-1.1 [ 26.423225] Fixing up Logitech keyboard report descriptor [ 26.423671] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.1/usb2/2-1/2-1.1/2-1.1:1.1/input/input2 [ 26.454141] input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.1-1.1 [ 26.454156] usbcore: registered new interface driver usbhid [ 26.454159] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 26.554065] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 26.578289] ata3.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7 [ 26.578291] ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 26.586277] ata3.00: configured for UDMA/133 [ 26.897952] ata4: SATA link down (SStatus 0 SControl 300) [ 26.908520] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 26.908579] scsi 2:0:0:0: Attached scsi generic sg2 type 0 [ 26.908604] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 26.908717] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 26.909153] scsi4 : sata_nv [ 26.909287] scsi5 : sata_nv [ 26.909453] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 20 [ 26.909456] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 20 [ 27.217858] ata5: SATA link down (SStatus 0 SControl 300) [ 27.537764] ata6: SATA link down (SStatus 0 SControl 300) [ 27.554538] Driver 'sd' needs updating - please use bus_type methods [ 27.554610] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 27.554619] sd 2:0:0:0: [sda] Write Protect is off [ 27.554622] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.554633] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.554667] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 27.554674] sd 2:0:0:0: [sda] Write Protect is off [ 27.554675] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.554685] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.554689] sda: sda1 sda2 [ 27.641385] sd 2:0:0:0: [sda] Attached SCSI disk [ 27.878565] Attempting manual resume [ 27.878568] swsusp: Resume From Partition 8:2 [ 27.878569] PM: Checking swsusp image. [ 27.878733] PM: Resume from disk failed. [ 27.914324] kjournald starting. Commit interval 5 seconds [ 27.914338] EXT3-fs: mounted filesystem with ordered data mode. [ 38.286928] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 38.422627] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 38.632951] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 38.698591] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 38.698603] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 38.870525] parport_pc 00:0a: reported by Plug and Play ACPI [ 38.870553] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 38.974523] input: Power Button (FF) as /devices/virtual/input/input4 [ 38.986425] ACPI: Power Button (FF) [PWRF] [ 38.986490] input: Power Button (CM) as /devices/virtual/input/input5 [ 39.002426] ACPI: Power Button (CM) [PWRB] [ 39.217299] nvidia: module license 'NVIDIA' taints kernel. [ 39.887560] Linux video capture interface: v2.00 [ 40.474019] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 40.474421] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 40.474431] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 40.474468] cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected] [ 40.474470] cx88[0]: TV tuner type 63, Radio tuner type -1 [ 40.509990] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 40.623119] tveeprom 2-0050: Hauppauge model 96019, rev D6D3, serial# 1619472 [ 40.623123] tveeprom 2-0050: MAC address is 00-0D-FE-18-B6-10 [ 40.623125] tveeprom 2-0050: tuner model is Philips FMD1216MEX (idx 133, type 4) [ 40.623127] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 40.623129] tveeprom 2-0050: audio processor is CX882 (idx 33) [ 40.623131] tveeprom 2-0050: decoder processor is CX882 (idx 25) [ 40.623133] tveeprom 2-0050: has radio, has IR receiver, has IR transmitter [ 40.623134] cx88[0]: hauppauge eeprom: model=96019 [ 40.623157] cx88[0]/0: found at 0000:04:09.0, rev: 5, irq: 17, latency: 32, mmio: 0xf8000000 [ 40.766070] wm8775 2-001b: chip found @ 0x36 (cx88[0]) [ 40.770590] cx88[0]/0: registered device video0 [v4l2] [ 40.770616] cx88[0]/0: registered device vbi0 [ 40.770638] cx88[0]/0: registered device radio0 [ 40.770731] cx88[0]/2: cx2388x 8802 Driver Manager [ 40.770747] ACPI: PCI Interrupt 0000:04:09.2[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 40.770754] cx88[0]/2: found at 0000:04:09.2, rev: 5, irq: 17, latency: 32, mmio: 0xf9000000 [ 40.954050] cx2388x alsa driver version 0.0.6 loaded [ 40.954107] ACPI: PCI Interrupt 0000:04:09.1[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 40.954129] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 41.037844] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 41.037848] cx88/2: registering cx8802 driver, type: dvb access: shared [ 41.037852] cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] [ 41.037854] cx88[0]/2: cx2388x based DVB/ATSC card [ 41.302554] DVB: registering new adapter (cx88[0]) [ 41.302559] DVB: registering frontend 0 (Conexant CX22702 DVB-T)... [ 41.356126] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 41.356130] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16 [ 41.356135] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 41.356270] NVRM: loading NVIDIA Linux x86_64 Kernel Module 96.43.05 Tue Jan 22 17:37:40 PST 2008 [ 41.416291] udev: renamed network interface eth0 to eth1 [ 41.423702] cx2388x blackbird driver version 0.0.6 loaded [ 41.423706] cx88/2: registering cx8802 driver, type: blackbird access: shared [ 41.423710] cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] [ 41.423713] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design) [ 41.423983] cx88[0]/2: registered device video1 [mpeg] [ 41.464620] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 41.464625] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 41.464715] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 41.735488] dib0700: loaded with support for 5 different device-types [ 41.735647] dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in warm state. [ 41.735679] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 41.735818] DVB: registering new adapter (Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity) [ 41.968128] DVB: registering frontend 1 (DiBcom 7000PC)... [ 41.999315] MT2266: successfully identified [ 42.156281] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 42.156472] DVB: registering new adapter (Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity) [ 42.307650] DVB: registering frontend 2 (DiBcom 7000PC)... [ 42.311385] MT2266: successfully identified [ 42.468281] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0b.1/usb2/2-2/input/input6 [ 42.505434] dvb-usb: schedule remote query interval to 150 msecs. [ 42.505439] dvb-usb: Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity successfully initialized and connected. [ 42.505595] usbcore: registered new interface driver dvb_usb_dib0700 [ 42.839334] NET: Registered protocol family 17 [ 44.433114] eth1: Setting full-duplex based on MII#1 link partner capability of 45e1. [ 44.630845] lp0: using parport0 (interrupt-driven). [ 44.779935] Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k [ 45.339880] EXT3 FS on sda1, internal journal [ 45.979210] NET: Registered protocol family 10 [ 45.979384] lo: Disabled Privacy Extensions [ 47.208868] ip_tables: (C) 2000-2006 Netfilter Core Team