[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F71B0 checksum 0 [ 0.000000] ACPI: RSDP 000F71B0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF30C0, 4B46 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF7C40, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=e21a98ec-170e-4e2e-97ef-36cf829f01cc ro quiet splash all_generic_ide [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1837.568 MHz processor. [ 16.691701] Console: colour VGA+ 80x25 [ 16.691705] console [tty0] enabled [ 16.692238] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 16.692720] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 16.724550] Memory: 1027008k/1048512k available (2157k kernel code, 20808k reserved, 998k data, 364k init, 131008k highmem) [ 16.724559] virtual kernel memory layout: [ 16.724560] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 16.724562] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 16.724563] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 16.724564] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 16.724566] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 16.724567] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 16.724568] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 16.724572] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 16.724620] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 16.804608] Calibrating delay using timer specific routine.. 3678.05 BogoMIPS (lpj=7356100) [ 16.804642] Security Framework initialized [ 16.804650] SELinux: Disabled at boot. [ 16.804670] AppArmor: AppArmor initialized [ 16.804675] Failure registering capabilities with primary security module. [ 16.804685] Mount-cache hash table entries: 512 [ 16.804835] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 16.804845] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.804848] CPU: L2 Cache: 512K (64 bytes/line) [ 16.804851] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000 [ 16.804863] Compat vDSO mapped to ffffe000. [ 16.804876] Checking 'hlt' instruction... OK. [ 16.820840] SMP alternatives: switching to UP code [ 16.821967] Freeing SMP alternatives: 11k freed [ 16.822093] Early unpacking initramfs... done [ 17.185856] ACPI: Core revision 20070126 [ 17.185940] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 17.200647] CPU0: AMD Athlon(tm) XP 2500+ stepping 00 [ 17.200674] Total of 1 processors activated (3678.05 BogoMIPS). [ 17.200868] ENABLING IO-APIC IRQs [ 17.201060] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 17.348434] Brought up 1 CPUs [ 17.348461] CPU0 attaching sched-domain: [ 17.348464] domain 0: span 01 [ 17.348466] groups: 01 [ 17.348664] net_namespace: 64 bytes [ 17.348670] Booting paravirtualized kernel on bare hardware [ 17.349194] Time: 15:27:25 Date: 05/27/08 [ 17.349225] NET: Registered protocol family 16 [ 17.349448] EISA bus registered [ 17.349475] ACPI: bus type pci registered [ 17.350071] PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=2 [ 17.350074] PCI: Using configuration type 1 [ 17.350075] Setting up standard PCI resources [ 17.357072] ACPI: EC: Look up EC in DSDT [ 17.362695] ACPI: Interpreter enabled [ 17.362698] ACPI: (supports S0 S1 S4 S5) [ 17.362713] ACPI: Using IOAPIC for interrupt routing [ 17.372153] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.373035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.373217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 17.373475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 17.424119] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 17.424293] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 17.424473] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 17.424647] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 17.424818] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 17.424989] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 17.425160] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 17.425336] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 17.425510] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 17.425682] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 17.425852] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 17.426024] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 17.426199] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 17.426377] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 17.426548] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 17.426719] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 17.426867] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 17.426999] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 17.427131] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [ 17.427262] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 17.427393] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 17.427585] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 17.427776] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 17.427967] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 17.428156] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [ 17.428347] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 17.428546] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 17.428681] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 17.428869] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 17.429060] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 17.429249] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 17.429443] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 17.429593] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.429629] pnp: PnP ACPI init [ 17.429637] ACPI: bus type pnp registered [ 17.435366] pnp: PnP ACPI: found 16 devices [ 17.435369] ACPI: ACPI bus type pnp unregistered [ 17.435373] PnPBIOS: Disabled by ACPI PNP [ 17.435637] PCI: Using ACPI for IRQ routing [ 17.435642] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.476364] NET: Registered protocol family 8 [ 17.476367] NET: Registered protocol family 20 [ 17.476446] AppArmor: AppArmor Filesystem Enabled [ 17.480327] Time: tsc clocksource has been installed. [ 17.488364] system 00:00: ioport range 0x4000-0x407f has been reserved [ 17.488368] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 17.488371] system 00:00: ioport range 0x4400-0x447f has been reserved [ 17.488373] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 17.488376] system 00:00: ioport range 0x4200-0x427f has been reserved [ 17.488379] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 17.488386] system 00:01: ioport range 0x5000-0x503f has been reserved [ 17.488389] system 00:01: ioport range 0x5100-0x513f has been reserved [ 17.488395] system 00:02: iomem range 0xd9800-0xdbfff has been reserved [ 17.488398] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved [ 17.488402] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 17.488404] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 17.488408] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 17.488411] system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved [ 17.488414] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 17.488417] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved [ 17.488420] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved [ 17.488423] system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved [ 17.488430] system 00:04: ioport range 0xb78-0xb7b has been reserved [ 17.488433] system 00:04: ioport range 0xf78-0xf7b has been reserved [ 17.488436] system 00:04: ioport range 0xa78-0xa7b has been reserved [ 17.488439] system 00:04: ioport range 0xe78-0xe7b has been reserved [ 17.488441] system 00:04: ioport range 0xbbc-0xbbf has been reserved [ 17.488444] system 00:04: ioport range 0xfbc-0xfbf has been reserved [ 17.488447] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 17.488450] system 00:04: ioport range 0x294-0x297 has been reserved [ 17.518895] PCI: Bridge: 0000:00:08.0 [ 17.518897] IO window: disabled. [ 17.518903] MEM window: e0000000-e0ffffff [ 17.518907] PREFETCH window: disabled. [ 17.518913] PCI: Bridge: 0000:00:1e.0 [ 17.518915] IO window: disabled. [ 17.518919] MEM window: e1000000-e2ffffff [ 17.518922] PREFETCH window: d0000000-d7ffffff [ 17.518933] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 17.518949] NET: Registered protocol family 2 [ 17.556388] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 17.556756] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.558051] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 17.558675] TCP: Hash tables configured (established 131072 bind 65536) [ 17.558678] TCP reno registered [ 17.568445] checking if image is initramfs... it is [ 18.020100] Switched to high resolution mode on CPU 0 [ 18.259814] Freeing initrd memory: 7702k freed [ 18.260556] audit: initializing netlink socket (disabled) [ 18.260571] audit(1211902045.424:1): initialized [ 18.260727] highmem bounce pool size: 64 pages [ 18.262778] VFS: Disk quotas dquot_6.5.1 [ 18.262856] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 18.262994] io scheduler noop registered [ 18.262997] io scheduler anticipatory registered [ 18.262999] io scheduler deadline registered [ 18.263011] io scheduler cfq registered (default) [ 18.315905] Boot video device is 0000:01:00.0 [ 18.316200] isapnp: Scanning for PnP cards... [ 18.670518] isapnp: No Plug & Play device found [ 18.701509] Real Time Clock Driver v1.12ac [ 18.701629] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.701766] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.701914] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.702497] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.702725] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.703617] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.703705] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 18.703811] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 18.703815] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 18.704182] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.707937] mice: PS/2 mouse device common for all mice [ 18.708066] EISA: Probing bus 0 at eisa.0 [ 18.708088] Cannot allocate resource for EISA slot 4 [ 18.708090] Cannot allocate resource for EISA slot 5 [ 18.708107] EISA: Detected 0 cards. [ 18.708110] cpuidle: using governor ladder [ 18.708112] cpuidle: using governor menu [ 18.708257] NET: Registered protocol family 1 [ 18.708287] Using IPI No-Shortcut mode [ 18.708324] registered taskstats version 1 [ 18.708422] Magic number: 8:539:488 [ 18.708593] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 18.708595] EDD information not available. [ 18.708977] Freeing unused kernel memory: 364k freed [ 18.739681] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 18.817070] SCSI subsystem initialized [ 18.823980] libata version 3.00 loaded. [ 18.825437] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 18.825574] scsi0 : ata_generic [ 18.825654] scsi1 : ata_generic [ 18.826495] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 18.826498] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 19.163886] ata1.00: ATA-6: ST380011A, 3.54, max UDMA/100 [ 19.163890] ata1.00: 156301488 sectors, multi 16: LBA48 [ 19.164115] ata1.01: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133 [ 19.164119] ata1.01: 398297088 sectors, multi 16: LBA48 [ 19.164130] ata1.00: configured for UDMA/100 [ 19.164133] ata1.01: configured for UDMA/133 [ 19.647461] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A304, max UDMA/33 [ 19.647481] ata2.01: ATAPI: CD-ROM 32X/AKU, U10I, max UDMA/33, CDB intr [ 19.647492] ata2.00: configured for UDMA/33 [ 19.647494] ata2.01: configured for UDMA/16 [ 19.647596] scsi 0:0:0:0: Direct-Access ATA ST380011A 3.54 PQ: 0 ANSI: 5 [ 19.647740] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y200P0 YAR4 PQ: 0 ANSI: 5 [ 19.651917] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4040B A304 PQ: 0 ANSI: 5 [ 19.652252] scsi 1:0:1:0: CD-ROM E-IDE CD-ROM 32X/AKU U10I PQ: 0 ANSI: 5 [ 20.807699] fuse init (API version 7.9) [ 20.825506] ACPI: Fan [FAN] (on) [ 20.834139] ACPI: Thermal Zone [THRM] (50 C) [ 21.847022] usbcore: registered new interface driver usbfs [ 21.847048] usbcore: registered new interface driver hub [ 21.866127] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 21.866489] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 21.866497] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16 [ 21.866506] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 21.874551] usbcore: registered new device driver usb [ 21.886980] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 22.099795] Floppy drive(s): fd0 is 1.44M [ 22.117867] FDC 0 is a post-1991 82077 [ 22.386211] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x57d @ 1, addr 00:00:00:21:3e:85 [ 22.386217] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 22.386694] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 22.386702] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17 [ 22.386716] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 22.386720] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 22.387004] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 22.387023] ohci_hcd 0000:00:02.0: irq 17, io mem 0xe3002000 [ 22.443891] usb usb1: configuration #1 chosen from 1 choice [ 22.443920] hub 1-0:1.0: USB hub found [ 22.443930] hub 1-0:1.0: 3 ports detected [ 22.546180] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 22.546189] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18 [ 22.546204] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 22.546209] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 22.546237] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 22.546256] ohci_hcd 0000:00:02.1: irq 18, io mem 0xe3003000 [ 22.603779] usb usb2: configuration #1 chosen from 1 choice [ 22.603807] hub 2-0:1.0: USB hub found [ 22.603818] hub 2-0:1.0: 3 ports detected [ 22.706350] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 22.706355] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16 [ 22.706368] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 22.706373] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 22.706404] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 22.706446] ehci_hcd 0000:00:02.2: debug port 1 [ 22.706452] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 22.706464] ehci_hcd 0000:00:02.2: irq 16, io mem 0xe3004000 [ 22.849537] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 22.861524] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.861653] usb usb3: configuration #1 chosen from 1 choice [ 22.861683] hub 3-0:1.0: USB hub found [ 22.861690] hub 3-0:1.0: 6 ports detected [ 22.968328] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 22.968338] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19 [ 23.031464] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[e0000000-e00007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 23.057372] Driver 'sd' needs updating - please use bus_type methods [ 23.057500] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 23.057516] sd 0:0:0:0: [sda] Write Protect is off [ 23.057519] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.057541] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.059034] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 23.059047] sd 0:0:0:0: [sda] Write Protect is off [ 23.059049] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.059068] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.059072] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 23.073186] sda1 sda2 < sda5 > [ 23.092413] sd 0:0:0:0: [sda] Attached SCSI disk [ 23.092490] sd 0:0:1:0: [sdb] 398297088 512-byte hardware sectors (203928 MB) [ 23.092505] sd 0:0:1:0: [sdb] Write Protect is off [ 23.092508] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 23.092529] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.092576] sd 0:0:1:0: [sdb] 398297088 512-byte hardware sectors (203928 MB) [ 23.092588] sd 0:0:1:0: [sdb] Write Protect is off [ 23.092590] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 23.092609] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.092613] sdb: sdb1 [ 23.099560] sd 0:0:1:0: [sdb] Attached SCSI disk [ 23.109304] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.109325] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 23.109344] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 23.109364] scsi 1:0:1:0: Attached scsi generic sg3 type 5 [ 23.110356] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 23.110362] Uniform CD-ROM driver Revision: 3.20 [ 23.110413] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 23.114006] sr1: scsi3-mmc drive: 0x/20x xa/form2 cdda tray [ 23.114083] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 23.565298] Attempting manual resume [ 23.565303] swsusp: Resume From Partition 8:5 [ 23.565305] PM: Checking swsusp image. [ 23.565493] PM: Resume from disk failed. [ 23.604034] kjournald starting. Commit interval 5 seconds [ 23.604050] EXT3-fs: mounted filesystem with ordered data mode. [ 23.936967] usb 1-1: new full speed USB device using ohci_hcd and address 3 [ 24.161207] usb 1-1: configuration #1 chosen from 1 choice [ 24.320878] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00019900000867be] [ 24.464703] usb 1-2: new low speed USB device using ohci_hcd and address 4 [ 24.678990] usb 1-2: configuration #1 chosen from 1 choice [ 30.485587] Linux agpgart interface v0.102 [ 30.534312] agpgart: Detected NVIDIA nForce2 chipset [ 30.549805] agpgart: AGP aperture is 128M @ 0xd8000000 [ 30.910022] input: Power Button (FF) as /devices/virtual/input/input2 [ 30.921344] ACPI: Power Button (FF) [PWRF] [ 30.921487] input: Power Button (CM) as /devices/virtual/input/input3 [ 30.933330] ACPI: Power Button (CM) [PWRB] [ 30.933573] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 30.933606] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100 [ 34.021096] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 34.045445] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.086318] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2F11 [ 34.086340] usbcore: registered new interface driver usblp [ 34.250459] usbcore: registered new interface driver hiddev [ 34.259900] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/input/input4 [ 34.271675] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2 [ 34.271695] usbcore: registered new interface driver usbhid [ 34.271700] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 34.803483] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 35.700862] nvidia: module license 'NVIDIA' taints kernel. [ 36.143114] parport_pc 00:0c: reported by Plug and Play ACPI [ 36.143174] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 36.231555] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19 [ 36.231963] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 36.263981] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 [ 36.263986] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17 [ 36.264016] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 36.586419] intel8x0_measure_ac97_clock: measured 52808 usecs [ 36.586423] intel8x0: clocking to 48000 [ 38.676614] lp0: using parport0 (interrupt-driven). [ 38.750477] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k [ 39.293263] EXT3 FS on sda1, internal journal [ 40.541743] ip_tables: (C) 2000-2006 Netfilter Core Team [ 40.904577] No dock devices found. [ 42.083139] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 42.083145] apm: overridden by ACPI. [ 42.199830] ppdev: user-space parallel port driver [ 42.426761] audit(1211902070.825:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5082 profile="/usr/sbin/cupsd" namespace="default" [ 43.770898] cdrom: This disc doesn't have any tracks I recognize! [ 44.006367] Bluetooth: Core ver 2.11 [ 44.007306] NET: Registered protocol family 31 [ 44.007310] Bluetooth: HCI device and connection manager initialized [ 44.007315] Bluetooth: HCI socket layer initialized [ 44.171550] Bluetooth: L2CAP ver 2.9 [ 44.171556] Bluetooth: L2CAP socket layer initialized [ 44.292016] Bluetooth: RFCOMM socket layer initialized [ 44.292035] Bluetooth: RFCOMM TTY layer initialized [ 44.292038] Bluetooth: RFCOMM ver 1.8 [ 47.519961] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 47.519975] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 47.520021] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 48.178407] NET: Registered protocol family 17 [ 50.131846] NET: Registered protocol family 10 [ 50.132573] lo: Disabled Privacy Extensions [ 60.726684] eth0: no IPv6 routers present