[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fef0000 (usable) [ 0.000000] BIOS-e820: 000000002fef0000 - 000000002fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000002fef3000 - 000000002ff00000 (ACPI data) [ 0.000000] BIOS-e820: 0000000030000000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 766MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5a80 [ 0.000000] Entering add_active_range(0, 0, 196336) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 196336 [ 0.000000] HighMem 196336 -> 196336 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 196336 [ 0.000000] On node 0 totalpages: 196336 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1501 pages used for memmap [ 0.000000] Normal zone: 190739 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7610 checksum 0 [ 0.000000] ACPI: RSDP 000F7610, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT 2FEF3100, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 2FEF9C80, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 2FEF3280, 6987 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 2FEF0000, 0040 [ 0.000000] ACPI: HPET 2FEF9E80, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 2FEF9F00, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 2FEF9DC0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194803 [ 0.000000] Kernel command line: root=UUID=fa371598-14a9-47ce-9510-a278cff56437 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2004.304 MHz processor. [ 15.948330] spurious 8259A interrupt: IRQ7. [ 15.951312] Console: colour VGA+ 80x25 [ 15.951316] console [tty0] enabled [ 15.951628] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 15.951988] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 15.964076] Memory: 765988k/785344k available (2157k kernel code, 18780k reserved, 998k data, 364k init, 0k highmem) [ 15.964084] virtual kernel memory layout: [ 15.964085] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 15.964086] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 15.964087] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB) [ 15.964088] lowmem : 0xc0000000 - 0xefef0000 ( 766 MB) [ 15.964089] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 15.964090] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 15.964091] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 15.964094] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 15.964122] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 15.964255] hpet clockevent registered [ 16.044111] Calibrating delay using timer specific routine.. 4011.79 BogoMIPS (lpj=8023591) [ 16.044128] Security Framework initialized [ 16.044132] SELinux: Disabled at boot. [ 16.044144] AppArmor: AppArmor initialized [ 16.044147] Failure registering capabilities with primary security module. [ 16.044155] Mount-cache hash table entries: 512 [ 16.044243] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 [ 16.044251] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.044253] CPU: L2 Cache: 512K (64 bytes/line) [ 16.044255] CPU 0(2) -> Core 0 [ 16.044257] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 [ 16.044265] Compat vDSO mapped to ffffe000. [ 16.044273] Checking 'hlt' instruction... OK. [ 16.060299] SMP alternatives: switching to UP code [ 16.061316] Early unpacking initramfs... done [ 16.373583] ACPI: Core revision 20070126 [ 16.373642] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.378383] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 16.378399] SMP alternatives: switching to SMP code [ 16.378805] Booting processor 1/1 eip 3000 [ 16.388313] Initializing CPU#1 [ 16.466872] Calibrating delay using timer specific routine.. 4008.38 BogoMIPS (lpj=8016775) [ 16.466878] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 [ 16.466884] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.466886] CPU: L2 Cache: 512K (64 bytes/line) [ 16.466888] CPU 1(2) -> Core 1 [ 16.466890] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 [ 16.467549] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 16.467564] Total of 2 processors activated (8020.18 BogoMIPS). [ 16.467859] ENABLING IO-APIC IRQs [ 16.468089] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 16.615163] Brought up 2 CPUs [ 16.615216] CPU0 attaching sched-domain: [ 16.615219] domain 0: span 03 [ 16.615221] groups: 01 02 [ 16.615224] CPU1 attaching sched-domain: [ 16.615225] domain 0: span 03 [ 16.615227] groups: 02 01 [ 16.615411] net_namespace: 64 bytes [ 16.615418] Booting paravirtualized kernel on bare hardware [ 16.615858] Time: 20:23:51 Date: 04/20/08 [ 16.615882] NET: Registered protocol family 16 [ 16.616043] EISA bus registered [ 16.616046] ACPI: bus type pci registered [ 16.622466] PCI: PCI BIOS revision 3.00 entry at 0xf2060, last bus=1 [ 16.622468] PCI: Using configuration type 1 [ 16.622470] Setting up standard PCI resources [ 16.627285] ACPI: EC: Look up EC in DSDT [ 16.634431] ACPI: Interpreter enabled [ 16.634433] ACPI: (supports S0 S1 S3 S4 S5) [ 16.634446] ACPI: Using IOAPIC for interrupt routing [ 16.644846] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.645657] PCI: Transparent bridge - 0000:00:10.0 [ 16.645671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.645938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 16.704836] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.705008] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.705178] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.705349] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) [ 16.705518] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.705688] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.705858] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15) [ 16.706028] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.706198] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 16.706368] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.706539] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) [ 16.706708] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.706879] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 16.707052] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.707223] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.707395] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 16.707567] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 16.707737] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.707911] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 16.708083] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) [ 16.708285] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 16.708481] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 16.708675] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 16.708869] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 16.709062] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 16.709256] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 16.709450] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 16.709643] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 16.709838] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 16.710033] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 16.710229] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 16.710423] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 16.710619] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 16.710814] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 16.711016] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 16.711211] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 16.711406] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 16.711601] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 16.711797] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 16.711992] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 16.712187] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 16.712309] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.712334] pnp: PnP ACPI init [ 16.712341] ACPI: bus type pnp registered [ 16.717851] pnpacpi: exceeded the max number of mem resources: 12 [ 16.717909] pnp: PnP ACPI: found 15 devices [ 16.717911] ACPI: ACPI bus type pnp unregistered [ 16.717915] PnPBIOS: Disabled by ACPI PNP [ 16.718095] PCI: Using ACPI for IRQ routing [ 16.718099] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.762806] NET: Registered protocol family 8 [ 16.762808] NET: Registered protocol family 20 [ 16.762837] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 16.762841] hpet0: 3 32-bit timers, 25000000 Hz [ 16.763881] AppArmor: AppArmor Filesystem Enabled [ 16.766793] Time: hpet clocksource has been installed. [ 16.766808] Switched to high resolution mode on CPU 0 [ 16.766428] Switched to high resolution mode on CPU 1 [ 16.774775] system 00:01: ioport range 0x4000-0x407f has been reserved [ 16.774778] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 16.774780] system 00:01: ioport range 0x4400-0x447f has been reserved [ 16.774783] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 16.774785] system 00:01: ioport range 0x4800-0x487f has been reserved [ 16.774788] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 16.774790] system 00:01: ioport range 0x2000-0x207f has been reserved [ 16.774793] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 16.774796] system 00:01: iomem range 0x30000000-0x3fffffff could not be reserved [ 16.774801] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 16.774804] system 00:02: ioport range 0x800-0x87f has been reserved [ 16.774806] system 00:02: ioport range 0x290-0x297 has been reserved [ 16.774815] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved [ 16.774821] system 00:0e: iomem range 0xf0000-0xf3fff could not be reserved [ 16.774824] system 00:0e: iomem range 0xf4000-0xf7fff could not be reserved [ 16.774827] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved [ 16.774829] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved [ 16.774832] system 00:0e: iomem range 0xfefff000-0xfefff0ff could not be reserved [ 16.774835] system 00:0e: iomem range 0x2fef0000-0x2fefffff could not be reserved [ 16.774837] system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved [ 16.774840] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 16.774843] system 00:0e: iomem range 0x100000-0x2feeffff could not be reserved [ 16.774845] system 00:0e: iomem range 0x2ff00000-0x3fefffff could not be reserved [ 16.774848] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved [ 16.774851] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved [ 16.805152] PCI: Bridge: 0000:00:10.0 [ 16.805155] IO window: b000-bfff [ 16.805158] MEM window: fdd00000-fddfffff [ 16.805161] PREFETCH window: fde00000-fdefffff [ 16.805173] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 16.805183] NET: Registered protocol family 2 [ 16.842686] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 16.842947] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.843701] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 16.844088] TCP: Hash tables configured (established 131072 bind 65536) [ 16.844090] TCP reno registered [ 16.854729] checking if image is initramfs... it is [ 17.467065] Freeing initrd memory: 7693k freed [ 17.467326] audit: initializing netlink socket (disabled) [ 17.467339] audit(1208723032.400:1): initialized [ 17.469204] VFS: Disk quotas dquot_6.5.1 [ 17.469270] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 17.469384] io scheduler noop registered [ 17.469386] io scheduler anticipatory registered [ 17.469388] io scheduler deadline registered [ 17.469397] io scheduler cfq registered (default) [ 17.469409] Boot video device is 0000:00:05.0 [ 17.486205] isapnp: Scanning for PnP cards... [ 17.838351] isapnp: No Plug & Play device found [ 17.864220] Real Time Clock Driver v1.12ac [ 17.864412] hpet_resources: 0xfefff000 is busy [ 17.864454] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.864581] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.864718] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 17.865240] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.865497] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 17.866253] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.866316] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 17.866403] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 17.866405] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 17.866513] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.885262] mice: PS/2 mouse device common for all mice [ 17.885377] EISA: Probing bus 0 at eisa.0 [ 17.885385] Cannot allocate resource for EISA slot 2 [ 17.885390] Cannot allocate resource for EISA slot 4 [ 17.885403] EISA: Detected 0 cards. [ 17.885405] cpuidle: using governor ladder [ 17.885408] cpuidle: using governor menu [ 17.885490] NET: Registered protocol family 1 [ 17.885515] Using IPI No-Shortcut mode [ 17.885546] registered taskstats version 1 [ 17.885657] Magic number: 4:435:397 [ 17.885773] hash matches device random [ 17.885805] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 17.885806] EDD information not available. [ 17.886026] Freeing unused kernel memory: 364k freed [ 17.924124] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 19.109240] fuse init (API version 7.9) [ 19.121541] ACPI: Fan [FAN] (on) [ 19.128486] ACPI: Thermal Zone [THRM] (40 C) [ 19.645249] usbcore: registered new interface driver usbfs [ 19.645271] usbcore: registered new interface driver hub [ 19.646049] usbcore: registered new device driver usb [ 19.656499] SCSI subsystem initialized [ 19.674209] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 19.674611] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 19.674622] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 [ 19.674636] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 19.674639] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 19.674922] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 19.674941] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xfe02f000 [ 19.684930] libata version 3.00 loaded. [ 19.731308] usb usb1: configuration #1 chosen from 1 choice [ 19.731332] hub 1-0:1.0: USB hub found [ 19.731339] hub 1-0:1.0: 8 ports detected [ 19.811034] Floppy drive(s): fd0 is 1.44M [ 19.829365] FDC 0 is a post-1991 82077 [ 19.832998] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 19.833008] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17 [ 19.833019] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 19.833023] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 19.833053] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 19.833081] ehci_hcd 0000:00:0b.1: debug port 1 [ 19.833085] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 19.833097] ehci_hcd 0000:00:0b.1: irq 17, io mem 0xfe02e000 [ 19.845494] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.845608] usb usb2: configuration #1 chosen from 1 choice [ 19.845630] hub 2-0:1.0: USB hub found [ 19.845635] hub 2-0:1.0: 8 ports detected [ 19.950242] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 19.949834] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 19.949849] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 18 [ 19.950667] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 19.950678] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 19 [ 19.950698] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 19.950706] ACPI: PCI interrupt for device 0000:00:0e.0 disabled [ 19.951000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 [ 19.951006] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 19.951023] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 19.951030] ACPI: PCI interrupt for device 0000:00:0f.0 disabled [ 19.999494] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 20.001651] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 20.002015] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 20.002018] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16 [ 20.002024] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 20.520119] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:9d:63:0f [ 20.520124] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3 [ 20.523195] sata_nv 0000:00:0e.0: version 3.5 [ 20.523211] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 19 [ 20.523254] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 20.523672] scsi0 : sata_nv [ 20.524267] scsi1 : sata_nv [ 20.524441] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 19 [ 20.524444] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 19 [ 20.847080] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 20.990343] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 21.013600] ata1.00: ATA-7: WDC WD1600AABS-00PRA0, 05.06H05, max UDMA/133 [ 21.013603] ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 21.028157] ata1.00: configured for UDMA/133 [ 21.058376] usb 1-1: configuration #1 chosen from 1 choice [ 21.061332] hub 1-1:1.0: USB hub found [ 21.064289] hub 1-1:1.0: 2 ports detected [ 21.270888] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800012ea3f6] [ 21.337678] ata2: SATA link down (SStatus 0 SControl 300) [ 21.348185] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AABS-0 05.0 PQ: 0 ANSI: 5 [ 21.348259] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 21.348306] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 21.348360] scsi2 : sata_nv [ 21.348398] scsi3 : sata_nv [ 21.348574] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 20 [ 21.348576] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 20 [ 21.474412] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 21.658071] ata3: SATA link down (SStatus 0 SControl 300) [ 21.697213] usb 1-2: configuration #1 chosen from 1 choice [ 21.910744] usb 1-1.1: new full speed USB device using ohci_hcd and address 4 [ 21.977464] ata4: SATA link down (SStatus 0 SControl 300) [ 21.988407] pata_amd 0000:00:0d.0: version 0.3.10 [ 21.988452] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 21.989016] scsi4 : pata_amd [ 21.989795] scsi5 : pata_amd [ 21.990393] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14 [ 21.990396] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15 [ 21.995294] Driver 'sd' needs updating - please use bus_type methods [ 21.995378] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 21.995390] sd 0:0:0:0: [sda] Write Protect is off [ 21.995392] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.995408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.995452] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 21.995460] sd 0:0:0:0: [sda] Write Protect is off [ 21.995462] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.995476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.995479] sda: sda1 sda2 sda3 < sda5 sda6<6>usb 1-1.1: configuration #1 chosen from 1 choice [ 22.030265] sda7 sda8 > [ 22.042427] sd 0:0:0:0: [sda] Attached SCSI disk [ 22.048047] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.161566] ata5.00: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133 [ 22.161570] ata5.00: 160836480 sectors, multi 1: LBA48 [ 22.185445] ata5.00: configured for UDMA/133 [ 22.246360] usb 1-1.2: new full speed USB device using ohci_hcd and address 5 [ 22.357009] usb 1-1.2: configuration #1 chosen from 1 choice [ 22.360940] usbcore: registered new interface driver hiddev [ 22.371069] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:0b.0/usb1/1-2/1-2:1.0/input/input2 [ 22.400723] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:0b.0-2 [ 22.400744] usbcore: registered new interface driver usbhid [ 22.400747] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 22.504820] ata6.00: ATAPI: ASUS DRW-1608P2, 1.41, max UDMA/66 [ 22.526635] Attempting manual resume [ 22.526638] swsusp: Resume From Partition 8:5 [ 22.526640] PM: Checking swsusp image. [ 22.526828] PM: Resume from disk failed. [ 22.558537] kjournald starting. Commit interval 5 seconds [ 22.558554] EXT3-fs: mounted filesystem with ordered data mode. [ 22.676428] ata6.00: configured for UDMA/66 [ 22.677033] scsi 4:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5 [ 22.677104] sd 4:0:0:0: [sdb] 160836480 512-byte hardware sectors (82348 MB) [ 22.677115] sd 4:0:0:0: [sdb] Write Protect is off [ 22.677118] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 22.677133] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.677178] sd 4:0:0:0: [sdb] 160836480 512-byte hardware sectors (82348 MB) [ 22.677187] sd 4:0:0:0: [sdb] Write Protect is off [ 22.677189] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 22.677203] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.677206] sdb: sdb1 sdb2 [ 22.684466] sd 4:0:0:0: [sdb] Attached SCSI disk [ 22.684500] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 22.690757] scsi 5:0:0:0: CD-ROM ASUS DRW-1608P2 1.41 PQ: 0 ANSI: 5 [ 22.690807] scsi 5:0:0:0: Attached scsi generic sg2 type 5 [ 28.716771] Linux agpgart interface v0.102 [ 28.852562] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 28.880623] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 28.880644] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 29.261530] nvidia: module license 'NVIDIA' taints kernel. [ 29.742859] input: Power Button (FF) as /devices/virtual/input/input4 [ 29.762131] ACPI: Power Button (FF) [PWRF] [ 29.762219] input: Power Button (CM) as /devices/virtual/input/input5 [ 29.794068] ACPI: Power Button (CM) [PWRB] [ 30.044692] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 30.044704] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 21 [ 30.044711] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 30.044942] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 30.409936] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 30.409941] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 17 [ 30.409963] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 30.513409] Driver 'sr' needs updating - please use bus_type methods [ 30.544417] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 30.544423] Uniform CD-ROM driver Revision: 3.20 [ 30.544512] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 30.875295] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x043D pid 0x0069 [ 30.875316] usbcore: registered new interface driver usblp [ 30.917190] parport_pc 00:0b: reported by Plug and Play ACPI [ 30.917220] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 30.989182] NET: Registered protocol family 17 [ 32.043686] lp0: using parport0 (interrupt-driven). [ 32.277485] Adding 522072k swap on /dev/sda5. Priority:-1 extents:1 across:522072k [ 32.837258] EXT3 FS on sda2, internal journal [ 33.439235] NET: Registered protocol family 10 [ 33.439465] lo: Disabled Privacy Extensions [ 34.033119] kjournald starting. Commit interval 5 seconds [ 34.033410] EXT3 FS on sda6, internal journal [ 34.033414] EXT3-fs: mounted filesystem with ordered data mode. [ 34.071222] kjournald starting. Commit interval 5 seconds [ 34.071460] EXT3 FS on sda7, internal journal [ 34.071463] EXT3-fs: mounted filesystem with ordered data mode. [ 34.077197] kjournald starting. Commit interval 5 seconds [ 34.077323] EXT3 FS on sdb2, internal journal [ 34.077326] EXT3-fs: mounted filesystem with ordered data mode. [ 34.216502] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 34.229748] FAT: bogus number of reserved sectors [ 34.229752] VFS: Can't find a valid FAT filesystem on dev sda1. [ 34.977191] ip_tables: (C) 2000-2006 Netfilter Core Team [ 35.414361] No dock devices found. [ 35.718836] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 35.719301] powernow-k8: MP systems not supported by PSB BIOS structure [ 35.718882] powernow-k8: MP systems not supported by PSB BIOS structure [ 36.365607] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 36.365613] apm: disabled - APM is not SMP safe. [ 36.512644] ppdev: user-space parallel port driver [ 36.653872] audit(1208733845.519:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5312 profile="/usr/sbin/cupsd" namespace="default" [ 39.867243] Bluetooth: Core ver 2.11 [ 39.867721] NET: Registered protocol family 31 [ 39.867727] Bluetooth: HCI device and connection manager initialized [ 39.867732] Bluetooth: HCI socket layer initialized [ 39.901893] Bluetooth: L2CAP ver 2.9 [ 39.901899] Bluetooth: L2CAP socket layer initialized [ 39.907106] Bluetooth: RFCOMM socket layer initialized [ 39.907122] Bluetooth: RFCOMM TTY layer initialized [ 39.907125] Bluetooth: RFCOMM ver 1.8 [ 43.563534] eth0: no IPv6 routers present