[4294667.296000] Linux version 2.6.15-21-k7 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Apr 21 17:10:51 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[4294667.296000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[4294667.296000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 131056
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 126960 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 AOPEN                                 ) @ 0x000f70a0
[4294667.296000] ACPI: RSDT (v001 AOPEN  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[4294667.296000] ACPI: FADT (v001 AOPEN  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[4294667.296000] ACPI: DSDT (v001 AOPEN  AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda2 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (014c3000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 2075.803 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294667.456000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.458000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.475000] Memory: 507912k/524224k available (2085k kernel code, 15668k reserved, 594k data, 328k init, 0k highmem)
[4294667.475000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.535000] Calibrating delay using timer specific routine.. 4153.75 BogoMIPS (lpj=2076879)
[4294667.535000] Security Framework v1.0.0 initialized
[4294667.535000] SELinux:  Disabled at boot.
[4294667.535000] Mount-cache hash table entries: 512
[4294667.535000] CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[4294667.535000] CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[4294667.535000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294667.535000] CPU: L2 Cache: 256K (64 bytes/line)
[4294667.535000] CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000
[4294667.535000] mtrr: v2.0 (20020519)
[4294667.535000] Enabling fast FPU save and restore... done.
[4294667.535000] Enabling unmasked SIMD FPU exception support... done.
[4294667.535000] Checking 'hlt' instruction... OK.
[4294667.539000] SMP alternatives: switching to UP code
[4294667.539000] checking if image is initramfs... it is
[4294668.041000] Freeing initrd memory: 6534k freed
[4294668.057000] ACPI: Looking for DSDT ... not found!
[4294668.058000] ACPI: setting ELCR to 0200 (from 0e00)
[4294668.163000] CPU0: AMD Athlon(tm) XP 2600+ stepping 01
[4294668.163000] SMP motherboard not detected.
[4294668.163000] Local APIC not detected. Using dummy APIC emulation.
[4294668.163000] Brought up 1 CPUs
[4294668.163000] NET: Registered protocol family 16
[4294668.163000] EISA bus registered
[4294668.163000] ACPI: bus type pci registered
[4294668.167000] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
[4294668.167000] PCI: Using configuration type 1
[4294668.168000] ACPI: Subsystem revision 20051216
[4294668.175000] ACPI: Interpreter enabled
[4294668.175000] ACPI: Using PIC for interrupt routing
[4294668.175000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.175000] PCI: Probing PCI hardware (bus 00)
[4294668.176000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294668.178000] PCI quirk: region 4000-407f claimed by vt8235 PM
[4294668.178000] PCI quirk: region 5000-500f claimed by vt8235 SMB
[4294668.178000] Boot video device is 0000:01:00.0
[4294668.178000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.196000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294668.196000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[4294668.196000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294668.197000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[4294668.200000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.200000] pnp: PnP ACPI init
[4294668.203000] pnp: PnP ACPI: found 15 devices
[4294668.203000] PnPBIOS: Disabled by ACPI PNP
[4294668.203000] PCI: Using ACPI for IRQ routing
[4294668.203000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294668.226000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[4294668.226000] pnp: 00:01: ioport range 0x5000-0x500f has been reserved
[4294668.226000] PCI: Bridge: 0000:00:01.0
[4294668.226000]   IO window: c000-cfff
[4294668.226000]   MEM window: e8000000-e9ffffff
[4294668.226000]   PREFETCH window: d8000000-e7ffffff
[4294668.226000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294668.227000] audit: initializing netlink socket (disabled)
[4294668.227000] audit(1146459968.225:1): initialized
[4294668.227000] VFS: Disk quotas dquot_6.5.1
[4294668.227000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.227000] Initializing Cryptographic API
[4294668.227000] io scheduler noop registered
[4294668.227000] io scheduler anticipatory registered
[4294668.227000] io scheduler deadline registered
[4294668.227000] io scheduler cfq registered
[4294668.227000] isapnp: Scanning for PnP cards...
[4294668.584000] isapnp: No Plug & Play device found
[4294668.598000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294668.598000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.598000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.598000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294668.598000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.598000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.600000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.600000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.601000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.601000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.601000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294668.601000] mice: PS/2 mouse device common for all mice
[4294668.601000] EISA: Probing bus 0 at eisa.0
[4294668.601000] Cannot allocate resource for EISA slot 4
[4294668.601000] Cannot allocate resource for EISA slot 5
[4294668.602000] EISA: Detected 0 cards.
[4294668.602000] NET: Registered protocol family 2
[4294668.611000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)[4294668.611000] TCP established hash table entries: 32768 (order: 6, 393216 bytes)
[4294668.612000] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
[4294668.612000] TCP: Hash tables configured (established 32768 bind 32768)
[4294668.612000] TCP reno registered
[4294668.613000] TCP bic registered
[4294668.613000] NET: Registered protocol family 1
[4294668.613000] NET: Registered protocol family 8
[4294668.613000] NET: Registered protocol family 20
[4294668.613000] Using IPI No-Shortcut mode
[4294668.613000] ACPI wakeup devices:
[4294668.613000] SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 MC97 UAR1 ECP1
[4294668.613000] ACPI: (supports S0 S1 S4 S5)
[4294668.613000] Freeing unused kernel memory: 328k freed
[4294668.625000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294668.683000] vga16fb: initializing
[4294668.683000] vga16fb: mapped to 0xc00a0000
[4294668.781000] Console: switching to colour frame buffer device 80x25
[4294668.781000] fb0: VGA16 VGA frame buffer device
[4294669.881000] Capability LSM initialized
[4294669.912000] ACPI: Fan [FAN] (on)
[4294669.915000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294669.917000] ACPI: Thermal Zone [THRM] (51 C)
[4294670.491000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294670.491000] **** SET: Misaligned resource pointer: de977da2 Type 07 Len 0
[4294670.492000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294670.492000] PCI: setting IRQ 11 as level-triggered
[4294670.492000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294670.492000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 11
[4294670.492000] VP_IDE: chipset revision 6
[4294670.492000] VP_IDE: not 100% native mode: will probe irqs later
[4294670.492000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[4294670.492000]     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
[4294670.492000]     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio
[4294670.492000] Probing IDE interface ide0...
[4294670.878000] hda: Maxtor 6Y080L0, ATA DISK drive
[4294671.490000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294671.508000] Probing IDE interface ide1...
[4294672.302000] hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
[4294672.914000] ide1 at 0x170-0x177,0x376 on irq 15
[4294672.921000] hda: max request size: 128KiB
[4294672.926000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[4294672.930000] hda: cache flushes supported
[4294672.931000]  hda: hda1 hda2 hda3 < hda5 >
[4294672.956000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294672.956000] Uniform CD-ROM driver Revision: 3.20
[4294673.223000] usbcore: registered new driver usbfs
[4294673.223000] usbcore: registered new driver hub
[4294673.225000] USB Universal Host Controller Interface driver v2.3
[4294673.225000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294673.225000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294673.226000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294673.226000] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d400
[4294673.226000] hub 1-0:1.0: USB hub found
[4294673.227000] hub 1-0:1.0: 2 ports detected
[4294673.328000] **** SET: Misaligned resource pointer: de977862 Type 07 Len 0
[4294673.328000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[4294673.328000] PCI: setting IRQ 10 as level-triggered
[4294673.328000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294673.328000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294673.328000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294673.328000] uhci_hcd 0000:00:10.1: irq 10, io base 0x0000d800
[4294673.329000] hub 2-0:1.0: USB hub found
[4294673.329000] hub 2-0:1.0: 2 ports detected
[4294673.430000] **** SET: Misaligned resource pointer: de9776e2 Type 07 Len 0
[4294673.430000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[4294673.430000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294673.430000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294673.430000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294673.430000] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000dc00
[4294673.431000] hub 3-0:1.0: USB hub found
[4294673.431000] hub 3-0:1.0: 2 ports detected
[4294673.534000] **** SET: Misaligned resource pointer: de977562 Type 07 Len 0
[4294673.534000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[4294673.534000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[4294673.534000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[4294673.535000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294673.535000] ehci_hcd 0000:00:10.3: irq 10, io mem 0xea011000
[4294673.535000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294673.535000] hub 4-0:1.0: USB hub found
[4294673.535000] hub 4-0:1.0: 6 ports detected
[4294673.723000] Attempting manual resume
[4294673.754000] EXT3-fs: mounted filesystem with ordered data mode.
[4294673.770000] kjournald starting.  Commit interval 5 seconds
[4294682.254000] ath_hal: module license 'Proprietary' taints kernel.
[4294682.255000] ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
[4294682.323000] wlan: 0.8.6.0 (EXPERIMENTAL)
[4294682.324000] ath_rate_sample: 1.2
[4294682.329000] ath_pci: 0.9.6.0 (EXPERIMENTAL)
[4294682.329000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294682.385000] Linux agpgart interface v0.101 (c) Dave Jones
[4294682.426000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[4294682.434000] agpgart: AGP aperture is 128M @ 0xd0000000
[4294682.514000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294682.756000] Build date: Apr 23 2006
[4294682.756000] Debugging version (IEEE80211)
[4294682.756000] ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[4294682.756000] ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[4294682.756000] ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[4294682.756000] ath0: H/W encryption support: WEP AES AES_CCM TKIP
[4294682.756000] ath0: mac 5.9 phy 4.3 radio 4.6
[4294682.756000] ath0: Use hw queue 1 for WME_AC_BE traffic
[4294682.756000] ath0: Use hw queue 0 for WME_AC_BK traffic
[4294682.756000] ath0: Use hw queue 2 for WME_AC_VI traffic
[4294682.756000] ath0: Use hw queue 3 for WME_AC_VO traffic
[4294682.756000] ath0: Use hw queue 8 for CAB traffic
[4294682.756000] ath0: Use hw queue 9 for beacons
[4294682.756000] Debugging version (ATH)
[4294682.756000] ath0: Atheros 5212: mem=0xea000000, irq=11
[4294682.758000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294683.062000] 8139too Fast Ethernet driver 0.9.27
[4294683.062000] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294683.062000] eth0: RealTek RTL8139 at 0xe0890000, 00:01:80:41:56:d9, IRQ 10
[4294683.062000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[4294683.069000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294683.248000] Real Time Clock Driver v1.12
[4294683.273000] input: PC Speaker as /class/input/input1
[4294683.332000] irda_init()
[4294683.332000] NET: Registered protocol family 23
[4294683.413000] Floppy drive(s): fd0 is 1.44M
[4294683.426000] FDC 0 is a post-1991 82077
[4294683.815000] input: PS2++ Logitech MX Mouse as /class/input/input2
[4294683.816000] via82xx: Assuming DXS channels with 48k fixed sample rate.
[4294683.816000]          Please try dxs_support=5 option
[4294683.816000]          and report if it works on your machine.
[4294683.816000]          For more details, read ALSA-Configuration.txt.
[4294683.816000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294683.817000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294683.843000] ts: Compaq touchscreen protocol output
[4294684.951000] parport: PnPBIOS parport detected.
[4294684.951000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294685.010000] NET: Registered protocol family 17
[4294685.729000] lp0: using parport0 (interrupt-driven).
[4294685.787000] Adding 1510068k swap on /dev/hda5.  Priority:-1 extents:1 across:1510068k
[4294685.916000] EXT3 FS on hda2, internal journal
[4294686.094000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294686.094000] md: bitmap version 4.39
[4294686.524000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294687.145000] cdrom: open failed.
[4294688.741000] ACPI: Power Button (FF) [PWRF]
[4294688.741000] ACPI: Power Button (CM) [PWRB]
[4294688.741000] ACPI: Sleep Button (CM) [SLPB]
[4294688.904000] ibm_acpi: ec object not found
[4294688.926000] pcc_acpi: loading...
[4294689.992000] NET: Registered protocol family 10
[4294689.992000] lo: Disabled Privacy Extensions
[4294689.993000] IPv6 over IPv4 tunneling driver
[4294693.287000] [drm] Initialized drm 1.0.0 20040925
[4294693.293000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294693.294000] [drm] Initialized radeon 1.19.0 20050911 on minor 0:
[4294694.186000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[4294694.186000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[4294694.186000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[4294694.514000] [drm] Loading R300 Microcode
[4294694.597000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294694.597000] apm: overridden by ACPI.
[4294696.651000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294696.651000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294696.651000] ide: failed opcode was: 0xec
[4294696.733000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294696.733000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294696.733000] ide: failed opcode was: 0xec
[4294700.801000] ath0: no IPv6 routers present
[4326481.958000] ibm_acpi: ec object not found
[4328743.646000] cdrom: This disc doesn't have any tracks I recognize!
[4328907.723000] cdrom: This disc doesn't have any tracks I recognize!
[4331016.274000] cdrom: This disc doesn't have any tracks I recognize!
snow@ubuntu:~$ mousepad lsmod.txt
snow@ubuntu:~$ dmesg
[4294667.296000] Linux version 2.6.15-21-k7 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Apr 21 17:10:51 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[4294667.296000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[4294667.296000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 131056
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 126960 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 AOPEN                                 ) @ 0x000f70a0
[4294667.296000] ACPI: RSDT (v001 AOPEN  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[4294667.296000] ACPI: FADT (v001 AOPEN  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[4294667.296000] ACPI: DSDT (v001 AOPEN  AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda2 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (014c3000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 2075.803 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294667.456000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.458000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.475000] Memory: 507912k/524224k available (2085k kernel code, 15668k reserved, 594k data, 328k init, 0k highmem)
[4294667.475000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.535000] Calibrating delay using timer specific routine.. 4153.75 BogoMIPS (lpj=2076879)
[4294667.535000] Security Framework v1.0.0 initialized
[4294667.535000] SELinux:  Disabled at boot.
[4294667.535000] Mount-cache hash table entries: 512
[4294667.535000] CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[4294667.535000] CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[4294667.535000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294667.535000] CPU: L2 Cache: 256K (64 bytes/line)
[4294667.535000] CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000
[4294667.535000] mtrr: v2.0 (20020519)
[4294667.535000] Enabling fast FPU save and restore... done.
[4294667.535000] Enabling unmasked SIMD FPU exception support... done.
[4294667.535000] Checking 'hlt' instruction... OK.
[4294667.539000] SMP alternatives: switching to UP code
[4294667.539000] checking if image is initramfs... it is
[4294668.041000] Freeing initrd memory: 6534k freed
[4294668.057000] ACPI: Looking for DSDT ... not found!
[4294668.058000] ACPI: setting ELCR to 0200 (from 0e00)
[4294668.163000] CPU0: AMD Athlon(tm) XP 2600+ stepping 01
[4294668.163000] SMP motherboard not detected.
[4294668.163000] Local APIC not detected. Using dummy APIC emulation.
[4294668.163000] Brought up 1 CPUs
[4294668.163000] NET: Registered protocol family 16
[4294668.163000] EISA bus registered
[4294668.163000] ACPI: bus type pci registered
[4294668.167000] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
[4294668.167000] PCI: Using configuration type 1
[4294668.168000] ACPI: Subsystem revision 20051216
[4294668.175000] ACPI: Interpreter enabled
[4294668.175000] ACPI: Using PIC for interrupt routing
[4294668.175000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.175000] PCI: Probing PCI hardware (bus 00)
[4294668.176000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294668.178000] PCI quirk: region 4000-407f claimed by vt8235 PM
[4294668.178000] PCI quirk: region 5000-500f claimed by vt8235 SMB
[4294668.178000] Boot video device is 0000:01:00.0
[4294668.178000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.196000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294668.196000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[4294668.196000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294668.197000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[4294668.200000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.200000] pnp: PnP ACPI init
[4294668.203000] pnp: PnP ACPI: found 15 devices
[4294668.203000] PnPBIOS: Disabled by ACPI PNP
[4294668.203000] PCI: Using ACPI for IRQ routing
[4294668.203000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294668.226000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[4294668.226000] pnp: 00:01: ioport range 0x5000-0x500f has been reserved
[4294668.226000] PCI: Bridge: 0000:00:01.0
[4294668.226000]   IO window: c000-cfff
[4294668.226000]   MEM window: e8000000-e9ffffff
[4294668.226000]   PREFETCH window: d8000000-e7ffffff
[4294668.226000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294668.227000] audit: initializing netlink socket (disabled)
[4294668.227000] audit(1146459968.225:1): initialized
[4294668.227000] VFS: Disk quotas dquot_6.5.1
[4294668.227000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.227000] Initializing Cryptographic API
[4294668.227000] io scheduler noop registered
[4294668.227000] io scheduler anticipatory registered
[4294668.227000] io scheduler deadline registered
[4294668.227000] io scheduler cfq registered
[4294668.227000] isapnp: Scanning for PnP cards...
[4294668.584000] isapnp: No Plug & Play device found
[4294668.598000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294668.598000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.598000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.598000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294668.598000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.598000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.600000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.600000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.601000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.601000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.601000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294668.601000] mice: PS/2 mouse device common for all mice
[4294668.601000] EISA: Probing bus 0 at eisa.0
[4294668.601000] Cannot allocate resource for EISA slot 4
[4294668.601000] Cannot allocate resource for EISA slot 5
[4294668.602000] EISA: Detected 0 cards.
[4294668.602000] NET: Registered protocol family 2
[4294668.611000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)[4294668.611000] TCP established hash table entries: 32768 (order: 6, 393216 bytes)
[4294668.612000] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
[4294668.612000] TCP: Hash tables configured (established 32768 bind 32768)
[4294668.612000] TCP reno registered
[4294668.613000] TCP bic registered
[4294668.613000] NET: Registered protocol family 1
[4294668.613000] NET: Registered protocol family 8
[4294668.613000] NET: Registered protocol family 20
[4294668.613000] Using IPI No-Shortcut mode
[4294668.613000] ACPI wakeup devices:
[4294668.613000] SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 MC97 UAR1 ECP1
[4294668.613000] ACPI: (supports S0 S1 S4 S5)
[4294668.613000] Freeing unused kernel memory: 328k freed
[4294668.625000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294668.683000] vga16fb: initializing
[4294668.683000] vga16fb: mapped to 0xc00a0000
[4294668.781000] Console: switching to colour frame buffer device 80x25
[4294668.781000] fb0: VGA16 VGA frame buffer device
[4294669.881000] Capability LSM initialized
[4294669.912000] ACPI: Fan [FAN] (on)
[4294669.915000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294669.917000] ACPI: Thermal Zone [THRM] (51 C)
[4294670.491000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294670.491000] **** SET: Misaligned resource pointer: de977da2 Type 07 Len 0
[4294670.492000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294670.492000] PCI: setting IRQ 11 as level-triggered
[4294670.492000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294670.492000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 11
[4294670.492000] VP_IDE: chipset revision 6
[4294670.492000] VP_IDE: not 100% native mode: will probe irqs later
[4294670.492000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[4294670.492000]     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
[4294670.492000]     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio
[4294670.492000] Probing IDE interface ide0...
[4294670.878000] hda: Maxtor 6Y080L0, ATA DISK drive
[4294671.490000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294671.508000] Probing IDE interface ide1...
[4294672.302000] hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
[4294672.914000] ide1 at 0x170-0x177,0x376 on irq 15
[4294672.921000] hda: max request size: 128KiB
[4294672.926000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[4294672.930000] hda: cache flushes supported
[4294672.931000]  hda: hda1 hda2 hda3 < hda5 >
[4294672.956000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294672.956000] Uniform CD-ROM driver Revision: 3.20
[4294673.223000] usbcore: registered new driver usbfs
[4294673.223000] usbcore: registered new driver hub
[4294673.225000] USB Universal Host Controller Interface driver v2.3
[4294673.225000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294673.225000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294673.226000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294673.226000] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d400
[4294673.226000] hub 1-0:1.0: USB hub found
[4294673.227000] hub 1-0:1.0: 2 ports detected
[4294673.328000] **** SET: Misaligned resource pointer: de977862 Type 07 Len 0
[4294673.328000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[4294673.328000] PCI: setting IRQ 10 as level-triggered
[4294673.328000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294673.328000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294673.328000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294673.328000] uhci_hcd 0000:00:10.1: irq 10, io base 0x0000d800
[4294673.329000] hub 2-0:1.0: USB hub found
[4294673.329000] hub 2-0:1.0: 2 ports detected
[4294673.430000] **** SET: Misaligned resource pointer: de9776e2 Type 07 Len 0
[4294673.430000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[4294673.430000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294673.430000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294673.430000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294673.430000] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000dc00
[4294673.431000] hub 3-0:1.0: USB hub found
[4294673.431000] hub 3-0:1.0: 2 ports detected
[4294673.534000] **** SET: Misaligned resource pointer: de977562 Type 07 Len 0
[4294673.534000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[4294673.534000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[4294673.534000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[4294673.535000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294673.535000] ehci_hcd 0000:00:10.3: irq 10, io mem 0xea011000
[4294673.535000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294673.535000] hub 4-0:1.0: USB hub found
[4294673.535000] hub 4-0:1.0: 6 ports detected
[4294673.723000] Attempting manual resume
[4294673.754000] EXT3-fs: mounted filesystem with ordered data mode.
[4294673.770000] kjournald starting.  Commit interval 5 seconds
[4294682.254000] ath_hal: module license 'Proprietary' taints kernel.
[4294682.255000] ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
[4294682.323000] wlan: 0.8.6.0 (EXPERIMENTAL)
[4294682.324000] ath_rate_sample: 1.2
[4294682.329000] ath_pci: 0.9.6.0 (EXPERIMENTAL)
[4294682.329000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294682.385000] Linux agpgart interface v0.101 (c) Dave Jones
[4294682.426000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[4294682.434000] agpgart: AGP aperture is 128M @ 0xd0000000
[4294682.514000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294682.756000] Build date: Apr 23 2006
[4294682.756000] Debugging version (IEEE80211)
[4294682.756000] ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[4294682.756000] ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[4294682.756000] ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[4294682.756000] ath0: H/W encryption support: WEP AES AES_CCM TKIP
[4294682.756000] ath0: mac 5.9 phy 4.3 radio 4.6
[4294682.756000] ath0: Use hw queue 1 for WME_AC_BE traffic
[4294682.756000] ath0: Use hw queue 0 for WME_AC_BK traffic
[4294682.756000] ath0: Use hw queue 2 for WME_AC_VI traffic
[4294682.756000] ath0: Use hw queue 3 for WME_AC_VO traffic
[4294682.756000] ath0: Use hw queue 8 for CAB traffic
[4294682.756000] ath0: Use hw queue 9 for beacons
[4294682.756000] Debugging version (ATH)
[4294682.756000] ath0: Atheros 5212: mem=0xea000000, irq=11
[4294682.758000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294683.062000] 8139too Fast Ethernet driver 0.9.27
[4294683.062000] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294683.062000] eth0: RealTek RTL8139 at 0xe0890000, 00:01:80:41:56:d9, IRQ 10
[4294683.062000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[4294683.069000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294683.248000] Real Time Clock Driver v1.12
[4294683.273000] input: PC Speaker as /class/input/input1
[4294683.332000] irda_init()
[4294683.332000] NET: Registered protocol family 23
[4294683.413000] Floppy drive(s): fd0 is 1.44M
[4294683.426000] FDC 0 is a post-1991 82077
[4294683.815000] input: PS2++ Logitech MX Mouse as /class/input/input2
[4294683.816000] via82xx: Assuming DXS channels with 48k fixed sample rate.
[4294683.816000]          Please try dxs_support=5 option
[4294683.816000]          and report if it works on your machine.
[4294683.816000]          For more details, read ALSA-Configuration.txt.
[4294683.816000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294683.817000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294683.843000] ts: Compaq touchscreen protocol output
[4294684.951000] parport: PnPBIOS parport detected.
[4294684.951000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294685.010000] NET: Registered protocol family 17
[4294685.729000] lp0: using parport0 (interrupt-driven).
[4294685.787000] Adding 1510068k swap on /dev/hda5.  Priority:-1 extents:1 across:1510068k
[4294685.916000] EXT3 FS on hda2, internal journal
[4294686.094000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294686.094000] md: bitmap version 4.39
[4294686.524000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294687.145000] cdrom: open failed.
[4294688.741000] ACPI: Power Button (FF) [PWRF]
[4294688.741000] ACPI: Power Button (CM) [PWRB]
[4294688.741000] ACPI: Sleep Button (CM) [SLPB]
[4294688.904000] ibm_acpi: ec object not found
[4294688.926000] pcc_acpi: loading...
[4294689.992000] NET: Registered protocol family 10
[4294689.992000] lo: Disabled Privacy Extensions
[4294689.993000] IPv6 over IPv4 tunneling driver
[4294693.287000] [drm] Initialized drm 1.0.0 20040925
[4294693.293000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294693.294000] [drm] Initialized radeon 1.19.0 20050911 on minor 0:
[4294694.186000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[4294694.186000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[4294694.186000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[4294694.514000] [drm] Loading R300 Microcode
[4294694.597000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294694.597000] apm: overridden by ACPI.
[4294696.651000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294696.651000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294696.651000] ide: failed opcode was: 0xec
[4294696.733000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294696.733000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294696.733000] ide: failed opcode was: 0xec
[4294700.801000] ath0: no IPv6 routers present
[4326481.958000] ibm_acpi: ec object not found
[4328743.646000] cdrom: This disc doesn't have any tracks I recognize!