[ 0.000000] Linux version 4.10.0-33-generic (buildd@lgw01-52) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #37-Ubuntu SMP Fri Aug 11 10:55:28 UTC 2017 (Ubuntu 4.10.0-33.37-generic 4.10.17) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.10.0-33-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000def7efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000def7f000-0x00000000df17efff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000df17f000-0x00000000df87efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df87f000-0x00000000dfb7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfb7f000-0x00000000dfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0200000-0x00000000f02fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000186ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000187000000-0x000000019effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by INSYDE Corp. [ 0.000000] efi: ESRT=0xdf227e58 ACPI 2.0=0xdfbfe014 SMBIOS=0xdf225000 PROP=0xd870b2d8 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: HP HP Notebook/81F9, BIOS F.02 03/30/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x187000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 base 0000FF800000 mask FFFFFF800000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000019f000000 aka 6640M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xdfc00 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000df227e58 to 0x00000000df227e90. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff8cedc0025000] 25000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x12382a000, 0x12382afff] PGTABLE [ 0.000000] BRK [0x12382b000, 0x12382bfff] PGTABLE [ 0.000000] BRK [0x12382c000, 0x12382cfff] PGTABLE [ 0.000000] BRK [0x12382d000, 0x12382dfff] PGTABLE [ 0.000000] BRK [0x12382e000, 0x12382efff] PGTABLE [ 0.000000] BRK [0x12382f000, 0x12382ffff] PGTABLE [ 0.000000] BRK [0x123830000, 0x123830fff] PGTABLE [ 0.000000] BRK [0x123831000, 0x123831fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3297d000-0x354b5fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DFBFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000DFBD0188 0000EC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013) [ 0.000000] ACPI: FACP 0x00000000DFBF9000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: DSDT 0x00000000DFBEA000 008B36 (v01 HPQOEM SLIC-MPC 00040000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x00000000DFB48000 000040 [ 0.000000] ACPI: UEFI 0x00000000DFBFD000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: MSDM 0x00000000DFBFC000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: ASF! 0x00000000DFBFB000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: BOOT 0x00000000DFBFA000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: HPET 0x00000000DFBF8000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: APIC 0x00000000DFBF7000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: MCFG 0x00000000DFBF6000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: SPCR 0x00000000DFBF5000 000050 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: WDAT 0x00000000DFBF4000 00017C (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: WDRT 0x00000000DFBF3000 000047 (v01 HPQOEM INSYDE 00000000 HP 00040000) [ 0.000000] ACPI: UEFI 0x00000000DFBE9000 000042 (v01 HPQOEM INSYDE 00000000 HP 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBE2000 0065C8 (v01 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBE1000 0009F8 (v01 HPQOEM INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBD8000 0087BF (v02 HPQOEM INSYDE 00000002 ACPI 00040000) [ 0.000000] ACPI: IVRS 0x00000000DFBD7000 0000D0 (v02 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: CRAT 0x00000000DFBD6000 000528 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBD5000 000482 (v01 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.000000] ACPI: TPM2 0x00000000DFBD4000 000034 (v03 HPQOEM INSYDE 00000002 HP 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBD3000 000692 (v01 HPQOEM INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBD1000 0019E1 (v01 HPQOEM INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBCE000 001654 (v01 HPQOEM INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x00000000DFBCD000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBCA000 0021A3 (v01 HPQOEM INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x00000000DFBC9000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000186ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x186fd5000-0x186ffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000186ffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000087fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000def7efff] [ 0.000000] node 0: [mem 0x00000000dfbff000-0x00000000dfbfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000186ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000186ffffff] [ 0.000000] On node 0 totalpages: 1466119 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1135 pages reserved [ 0.000000] DMA zone: 3975 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14206 pages used for memmap [ 0.000000] DMA32 zone: 909184 pages, LIFO batch:31 [ 0.000000] Normal zone: 8640 pages used for memmap [ 0.000000] Normal zone: 552960 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdef7f000-0xdf17efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf17f000-0xdf87efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf87f000-0xdfb7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfb7f000-0xdfbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfc00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf01fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0200000-0xf02fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0300000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf01fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff8cef46c00000 s107992 r8192 d31272 u524288 [ 0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1442074 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.10.0-33-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 5580616K/5864476K available (9091K kernel code, 1667K rwdata, 3820K rodata, 2232K init, 2364K bss, 283860K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:524544 nr_irqs:1000 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2395.561 MHz processor [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.12 BogoMIPS (lpj=9582244) [ 0.000027] pid_max: default: 32768 minimum: 301 [ 0.000041] ACPI: Core revision 20160930 [ 0.014770] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.018585] Security Framework initialized [ 0.018586] Yama: becoming mindful. [ 0.018606] AppArmor: AppArmor initialized [ 0.019020] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.020845] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021688] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.021695] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.021975] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support. [ 0.021981] CPU: Physical Processor ID: 0 [ 0.021981] CPU: Processor Core ID: 0 [ 0.021992] mce: CPU supports 7 MCE banks [ 0.021998] LVT offset 1 assigned for vector 0xf9 [ 0.022005] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.022005] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.022653] Freeing SMP alternatives memory: 36K [ 0.050434] ftrace: allocating 34198 entries in 134 pages [ 0.065931] smpboot: Max logical packages: 1 [ 0.146838] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.294163] smpboot: CPU0: AMD A10-9600P RADEON R5, 10 COMPUTE CORES 4C+6G (family: 0x15, model: 0x65, stepping: 0x1) [ 0.294257] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.294262] ... version: 0 [ 0.294263] ... bit width: 48 [ 0.294264] ... generic registers: 6 [ 0.294264] ... value mask: 0000ffffffffffff [ 0.294265] ... max period: 00007fffffffffff [ 0.294265] ... fixed-purpose events: 0 [ 0.294266] ... event mask: 000000000000003f [ 0.295235] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.295255] smp: Bringing up secondary CPUs ... [ 0.295360] x86: Booting SMP configuration: [ 0.295361] .... node #0, CPUs: #1 #2 #3 [ 0.302726] smp: Brought up 1 node, 4 CPUs [ 0.302729] smpboot: Total of 4 processors activated (19164.48 BogoMIPS) [ 0.304237] devtmpfs: initialized [ 0.304299] x86/mm: Memory block size: 128MB [ 0.306810] evm: security.selinux [ 0.306810] evm: security.SMACK64 [ 0.306811] evm: security.SMACK64EXEC [ 0.306811] evm: security.SMACK64TRANSMUTE [ 0.306811] evm: security.SMACK64MMAP [ 0.306812] evm: security.ima [ 0.306812] evm: security.capability [ 0.307273] PM: Registering ACPI NVS region [mem 0xdf87f000-0xdfb7efff] (3145728 bytes) [ 0.307431] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.307447] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.307540] pinctrl core: initialized pinctrl subsystem [ 0.307702] RTC time: 0:19:18, date: 08/31/17 [ 0.309129] NET: Registered protocol family 16 [ 0.326381] cpuidle: using governor ladder [ 0.342382] cpuidle: using governor menu [ 0.342386] PCCT header not found. [ 0.343233] Simple Boot Flag at 0x44 set to 0x1 [ 0.343258] ACPI: bus type PCI registered [ 0.343260] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.343353] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.343908] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.343971] PCI: Using configuration type 1 for base access [ 0.357156] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.357158] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.358364] ACPI: Added _OSI(Module Device) [ 0.358366] ACPI: Added _OSI(Processor Device) [ 0.358367] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.358368] ACPI: Added _OSI(Processor Aggregator Device) [ 0.358629] ACPI: Executed 1 blocks of module-level executable AML code [ 0.365245] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.369059] ACPI : EC: EC started [ 0.369060] ACPI : EC: interrupt blocked [ 0.369274] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.369276] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.369278] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions [ 0.369278] ACPI: Interpreter enabled [ 0.369342] ACPI: (supports S0 S3 S4 S5) [ 0.369343] ACPI: Using IOAPIC for interrupt routing [ 0.369460] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.369512] platform wdat_wdt: failed to claim resource 1 [ 0.369516] ACPI: watchdog: Device creation failed: -16 [ 0.370923] ACPI: Power Resource [P0U2] (off) [ 0.370958] ACPI: Power Resource [P3U2] (off) [ 0.371408] ACPI: Power Resource [P0U3] (off) [ 0.371440] ACPI: Power Resource [P3U3] (off) [ 0.498401] ACPI: Power Resource [P0ST] (on) [ 0.498433] ACPI: Power Resource [P3ST] (on) [ 0.498518] ACPI: Power Resource [P0SA] (off) [ 0.498606] ACPI: Power Resource [P3SA] (off) [ 0.501423] ACPI: Power Resource [P0SD] (off) [ 0.501452] ACPI: Power Resource [P3SD] (off) [ 0.501981] ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359) [ 0.501987] ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cef408b6438), AE_NOT_FOUND (20160930/psparse-543) [ 0.502026] ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359) [ 0.502029] ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cef408b6438), AE_NOT_FOUND (20160930/psparse-543) [ 0.504447] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.504453] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.504458] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.504477] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.504563] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cfbff]) [ 0.504732] PCI host bridge to bus 0000:00 [ 0.504735] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.504736] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.504738] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.504777] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.504778] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.504779] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.504780] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.504781] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.504782] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.504783] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.504784] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.504785] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.504786] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.504787] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.504789] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.504790] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window] [ 0.504791] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.504798] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000 [ 0.504878] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600 [ 0.504970] pci 0000:00:01.0: [1002:9874] type 00 class 0x030000 [ 0.504981] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.504988] pci 0000:00:01.0: reg 0x18: [mem 0xf0800000-0xf0ffffff 64bit pref] [ 0.504993] pci 0000:00:01.0: reg 0x20: [io 0x4000-0x40ff] [ 0.504998] pci 0000:00:01.0: reg 0x24: [mem 0xf0500000-0xf053ffff] [ 0.505003] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.505033] pci 0000:00:01.0: supports D1 D2 [ 0.505034] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.505110] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.505120] pci 0000:00:01.1: reg 0x10: [mem 0xf0560000-0xf0563fff 64bit] [ 0.505163] pci 0000:00:01.1: supports D1 D2 [ 0.505218] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000 [ 0.505291] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400 [ 0.505346] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.505415] pci 0000:00:02.4: [1022:157c] type 01 class 0x060400 [ 0.505469] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold [ 0.505507] pci 0000:00:02.4: System wakeup disabled by ACPI [ 0.505541] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000 [ 0.505613] pci 0000:00:03.1: [1022:157c] type 01 class 0x060400 [ 0.505670] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.505708] pci 0000:00:03.1: System wakeup disabled by ACPI [ 0.505748] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000 [ 0.505758] pci 0000:00:08.0: reg 0x10: [mem 0xf0540000-0xf055ffff 64bit pref] [ 0.505762] pci 0000:00:08.0: reg 0x18: [mem 0xf0300000-0xf03fffff] [ 0.505766] pci 0000:00:08.0: reg 0x1c: [mem 0xf0570000-0xf0570fff] [ 0.505773] pci 0000:00:08.0: reg 0x24: [mem 0xf056a000-0xf056bfff] [ 0.505844] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000 [ 0.505916] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300 [ 0.505923] pci 0000:00:09.2: reg 0x10: [mem 0xf0564000-0xf0567fff] [ 0.505955] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold [ 0.506032] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330 [ 0.506052] pci 0000:00:10.0: reg 0x10: [mem 0xf0568000-0xf0569fff 64bit] [ 0.506143] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.506211] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.506244] pci 0000:00:11.0: [1022:7904] type 00 class 0x010601 [ 0.506258] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f] [ 0.506265] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127] [ 0.506273] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117] [ 0.506281] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123] [ 0.506288] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f] [ 0.506296] pci 0000:00:11.0: reg 0x24: [mem 0xf056c000-0xf056c3ff] [ 0.506330] pci 0000:00:11.0: PME# supported from D3hot [ 0.506497] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320 [ 0.507191] pci 0000:00:12.0: reg 0x10: [mem 0xf056e000-0xf056e0ff] [ 0.510496] pci 0000:00:12.0: supports D1 D2 [ 0.510497] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.510569] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.510623] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.510780] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.510894] pci 0000:00:14.7: [1022:7906] type 00 class 0x080501 [ 0.510912] pci 0000:00:14.7: reg 0x10: [mem 0xf056d000-0xf056d0ff 64bit] [ 0.510974] pci 0000:00:14.7: PME# supported from D3cold [ 0.511033] pci 0000:00:18.0: [1022:1570] type 00 class 0x060000 [ 0.511093] pci 0000:00:18.1: [1022:1571] type 00 class 0x060000 [ 0.511150] pci 0000:00:18.2: [1022:1572] type 00 class 0x060000 [ 0.511213] pci 0000:00:18.3: [1022:1573] type 00 class 0x060000 [ 0.511273] pci 0000:00:18.4: [1022:1574] type 00 class 0x060000 [ 0.511329] pci 0000:00:18.5: [1022:1575] type 00 class 0x060000 [ 0.511461] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.511481] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.511507] pci 0000:01:00.0: reg 0x18: [mem 0xf0400000-0xf0400fff 64bit] [ 0.511526] pci 0000:01:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref] [ 0.511609] pci 0000:01:00.0: supports D1 D2 [ 0.511610] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.511677] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.522394] pci 0000:00:02.2: PCI bridge to [bus 01] [ 0.522400] pci 0000:00:02.2: bridge window [io 0x3000-0x3fff] [ 0.522403] pci 0000:00:02.2: bridge window [mem 0xf0400000-0xf04fffff] [ 0.522407] pci 0000:00:02.2: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.522632] pci 0000:02:00.0: [10ec:8179] type 00 class 0x028000 [ 0.522834] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.522860] pci 0000:02:00.0: reg 0x18: [mem 0xf1000000-0xf1003fff 64bit] [ 0.523006] pci 0000:02:00.0: supports D1 D2 [ 0.523007] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.534435] pci 0000:00:02.4: PCI bridge to [bus 02-05] [ 0.534441] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff] [ 0.534444] pci 0000:00:02.4: bridge window [mem 0xf1000000-0xf10fffff] [ 0.534448] pci 0000:00:02.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.534610] pci 0000:00:03.1: PCI bridge to [bus 06] [ 0.534909] ACPI: IRQ 7 override to edge, high [ 0.599409] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled. [ 0.599463] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled. [ 0.599504] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled. [ 0.599554] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled. [ 0.599601] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled. [ 0.599638] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled. [ 0.599675] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled. [ 0.599713] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled. [ 0.599752] ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359) [ 0.599758] ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cef408b6438), AE_NOT_FOUND (20160930/psparse-543) [ 0.600329] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.600464] ACPI : EC: interrupt unblocked [ 0.600469] ACPI : EC: event unblocked [ 0.600476] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.600478] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.600807] SCSI subsystem initialized [ 0.600943] libata version 3.00 loaded. [ 0.601006] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.601008] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.601016] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.601017] vgaarb: loaded [ 0.601084] ACPI: bus type USB registered [ 0.601100] usbcore: registered new interface driver usbfs [ 0.601107] usbcore: registered new interface driver hub [ 0.601158] usbcore: registered new device driver usb [ 0.601626] Registered efivars operations [ 0.628488] PCI: Using ACPI for IRQ routing [ 0.630338] PCI: pci_cache_line_size set to 64 bytes [ 0.630488] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 0.630489] e820: reserve RAM buffer [mem 0xdef7f000-0xdfffffff] [ 0.630490] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff] [ 0.630491] e820: reserve RAM buffer [mem 0x187000000-0x187ffffff] [ 0.630694] NetLabel: Initializing [ 0.630695] NetLabel: domain hash size = 128 [ 0.630696] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.630711] NetLabel: unlabeled traffic allowed by default [ 0.630948] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.630951] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.633140] clocksource: Switched to clocksource hpet [ 0.642302] VFS: Disk quotas dquot_6.6.0 [ 0.642338] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.642510] AppArmor: AppArmor Filesystem Enabled [ 0.642566] pnp: PnP ACPI init [ 0.642741] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 0.642743] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.642744] system 00:00: [mem 0xf0200000-0xf02fffff] has been reserved [ 0.642748] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.642860] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.642890] pnp 00:02: Plug and Play ACPI device, IDs FUJ7401 PNP0303 (active) [ 0.642910] pnp 00:03: Plug and Play ACPI device, IDs SYN3223 PNP0f13 (active) [ 0.642952] system 00:04: [io 0x0400-0x04cf] has been reserved [ 0.642953] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.642955] system 00:04: [io 0x04d6] has been reserved [ 0.642956] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.642957] system 00:04: [io 0x0c14] has been reserved [ 0.642958] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.642959] system 00:04: [io 0x0c6c] has been reserved [ 0.642961] system 00:04: [io 0x0c6f] has been reserved [ 0.642962] system 00:04: [io 0x0cd0-0x0cdb] has been reserved [ 0.642964] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.643016] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.643018] system 00:05: [mem 0xff800000-0xffffffff] has been reserved [ 0.643020] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.706286] ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359) [ 0.706294] ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cef408b6438), AE_NOT_FOUND (20160930/psparse-543) [ 0.706510] pnp: PnP ACPI: found 6 devices [ 0.746341] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.746351] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.746375] pci 0000:00:03.1: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.746377] pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 0.746379] pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000 [ 0.746388] pci 0000:00:03.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.746389] pci 0000:00:03.1: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.746390] pci 0000:00:03.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.746392] pci 0000:00:03.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.746393] pci 0000:00:03.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.746394] pci 0000:00:03.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.746401] pci 0000:00:03.1: BAR 14: assigned [mem 0xf0600000-0xf07fffff] [ 0.746409] pci 0000:00:03.1: BAR 15: assigned [mem 0xf1100000-0xf12fffff 64bit pref] [ 0.746413] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0580000-0xf059ffff pref] [ 0.746417] pci 0000:00:03.1: BAR 13: assigned [io 0x1000-0x1fff] [ 0.746420] pci 0000:00:02.2: PCI bridge to [bus 01] [ 0.746422] pci 0000:00:02.2: bridge window [io 0x3000-0x3fff] [ 0.746425] pci 0000:00:02.2: bridge window [mem 0xf0400000-0xf04fffff] [ 0.746427] pci 0000:00:02.2: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.746432] pci 0000:00:02.4: PCI bridge to [bus 02-05] [ 0.746433] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff] [ 0.746436] pci 0000:00:02.4: bridge window [mem 0xf1000000-0xf10fffff] [ 0.746438] pci 0000:00:02.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.746442] pci 0000:00:03.1: PCI bridge to [bus 06] [ 0.746443] pci 0000:00:03.1: bridge window [io 0x1000-0x1fff] [ 0.746446] pci 0000:00:03.1: bridge window [mem 0xf0600000-0xf07fffff] [ 0.746448] pci 0000:00:03.1: bridge window [mem 0xf1100000-0xf12fffff 64bit pref] [ 0.746454] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.746455] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.746456] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.746457] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.746458] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.746459] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.746460] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] [ 0.746460] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] [ 0.746461] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] [ 0.746462] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] [ 0.746463] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] [ 0.746464] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] [ 0.746465] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] [ 0.746466] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] [ 0.746467] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window] [ 0.746468] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window] [ 0.746469] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.746470] pci_bus 0000:01: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.746471] pci_bus 0000:01: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.746472] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.746473] pci_bus 0000:02: resource 1 [mem 0xf1000000-0xf10fffff] [ 0.746474] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.746475] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] [ 0.746476] pci_bus 0000:06: resource 1 [mem 0xf0600000-0xf07fffff] [ 0.746477] pci_bus 0000:06: resource 2 [mem 0xf1100000-0xf12fffff 64bit pref] [ 0.746583] NET: Registered protocol family 2 [ 0.746824] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.747004] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.747252] TCP: Hash tables configured (established 65536 bind 65536) [ 0.747301] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.747332] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.747403] NET: Registered protocol family 1 [ 0.747426] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.773769] PCI: CLS 64 bytes, default 64 [ 0.773827] Unpacking initramfs... [ 1.446488] Freeing initrd memory: 44260K [ 1.446574] AMD-Vi: IOMMU performance counters supported [ 1.446755] pci 0000:00:00.2: can't derive routing for PCI INT A [ 1.446756] pci 0000:00:00.2: PCI INT A: not connected [ 1.446986] iommu: Adding device 0000:00:01.0 to group 0 [ 1.447047] iommu: Using direct mapping for device 0000:00:01.0 [ 1.447078] iommu: Adding device 0000:00:01.1 to group 0 [ 1.447125] iommu: Adding device 0000:00:02.0 to group 1 [ 1.447140] iommu: Adding device 0000:00:02.2 to group 1 [ 1.447156] iommu: Adding device 0000:00:02.4 to group 1 [ 1.447209] iommu: Adding device 0000:00:03.0 to group 2 [ 1.447224] iommu: Adding device 0000:00:03.1 to group 2 [ 1.447269] iommu: Adding device 0000:00:08.0 to group 3 [ 1.447322] iommu: Adding device 0000:00:09.0 to group 4 [ 1.447338] iommu: Adding device 0000:00:09.2 to group 4 [ 1.447383] iommu: Adding device 0000:00:10.0 to group 5 [ 1.447426] iommu: Adding device 0000:00:11.0 to group 6 [ 1.447471] iommu: Adding device 0000:00:12.0 to group 7 [ 1.447526] iommu: Adding device 0000:00:14.0 to group 8 [ 1.447543] iommu: Adding device 0000:00:14.3 to group 8 [ 1.447557] iommu: Adding device 0000:00:14.7 to group 8 [ 1.447628] iommu: Adding device 0000:00:18.0 to group 9 [ 1.447643] iommu: Adding device 0000:00:18.1 to group 9 [ 1.447658] iommu: Adding device 0000:00:18.2 to group 9 [ 1.447673] iommu: Adding device 0000:00:18.3 to group 9 [ 1.447687] iommu: Adding device 0000:00:18.4 to group 9 [ 1.447702] iommu: Adding device 0000:00:18.5 to group 9 [ 1.447722] iommu: Adding device 0000:01:00.0 to group 1 [ 1.447780] iommu: Adding device 0000:02:00.0 to group 1 [ 1.448155] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.448157] AMD-Vi: Extended features (0x37ef22294ada): [ 1.448158] PPR NX GT IA GA PC GA_vAPIC [ 1.448161] AMD-Vi: Interrupt remapping enabled [ 1.448161] AMD-Vi: virtual APIC enabled [ 1.448481] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.449820] perf: AMD NB counters detected [ 1.450079] LVT offset 0 assigned for vector 0x400 [ 1.450121] perf: AMD IBS detected (0x000007ff) [ 1.450126] perf: amd_iommu: Detected. (0 banks, 0 counters/bank) [ 1.450184] Scanning for low memory corruption every 60 seconds [ 1.451627] audit: initializing netlink subsys (disabled) [ 1.452153] audit: type=2000 audit(1504138758.244:1): initialized [ 1.452502] Initialise system trusted keyrings [ 1.453019] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.454550] zbud: loaded [ 1.455235] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.455647] fuse init (API version 7.26) [ 1.458271] Key type asymmetric registered [ 1.458273] Asymmetric key parser 'x509' registered [ 1.458389] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.458766] io scheduler noop registered [ 1.458768] io scheduler deadline registered [ 1.458787] io scheduler cfq registered (default) [ 1.458987] amd_gpio AMD0030:00: Failed to get gpio IRQ. [ 1.501430] amd_gpio: probe of AMD0030:00 failed with error -22 [ 1.501982] efifb: probing for efifb [ 1.502007] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k [ 1.502007] efifb: mode is 1366x768x32, linelength=5632, pages=1 [ 1.502008] efifb: scrolling: redraw [ 1.502009] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.502280] Console: switching to colour frame buffer device 170x48 [ 1.502299] fb0: EFI VGA frame buffer device [ 1.502527] ACPI: AC Adapter [ACAD] (on-line) [ 1.502592] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.502595] ACPI: Power Button [PWRB] [ 1.502673] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.502677] ACPI: Lid Switch [LID] [ 1.502748] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.502750] ACPI: Power Button [PWRF] [ 1.503533] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.503587] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.503588] ACPI: Thermal Zone [TSZ0] (64 C) [ 1.503698] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.503699] ACPI: Thermal Zone [TSZ2] (20 C) [ 1.503742] GHES: HEST is not enabled! [ 1.503877] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.505348] Linux agpgart interface v0.103 [ 1.507659] loop: module loaded [ 1.507887] libphy: Fixed MDIO Bus: probed [ 1.507888] tun: Universal TUN/TAP device driver, 1.6 [ 1.507888] tun: (C) 1999-2004 Max Krasnyansky [ 1.507929] PPP generic driver version 2.4.2 [ 1.507980] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.507983] ehci-pci: EHCI PCI platform driver [ 1.508195] ehci-pci 0000:00:12.0: EHCI Host Controller [ 1.508200] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.508210] ehci-pci 0000:00:12.0: debug port 2 [ 1.508257] ehci-pci 0000:00:12.0: irq 18, io mem 0xf056e000 [ 1.521340] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00 [ 1.521414] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.521416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.521417] usb usb1: Product: EHCI Host Controller [ 1.521418] usb usb1: Manufacturer: Linux 4.10.0-33-generic ehci_hcd [ 1.521419] usb usb1: SerialNumber: 0000:00:12.0 [ 1.521559] hub 1-0:1.0: USB hub found [ 1.521565] hub 1-0:1.0: 2 ports detected [ 1.521705] ehci-platform: EHCI generic platform driver [ 1.521728] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.521730] ohci-pci: OHCI PCI platform driver [ 1.521741] ohci-platform: OHCI generic platform driver [ 1.521750] uhci_hcd: USB Universal Host Controller Interface driver [ 1.521897] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.521901] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 1.522112] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410 [ 1.522306] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.522307] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.522308] usb usb2: Product: xHCI Host Controller [ 1.522309] usb usb2: Manufacturer: Linux 4.10.0-33-generic xhci-hcd [ 1.522310] usb usb2: SerialNumber: 0000:00:10.0 [ 1.522401] hub 2-0:1.0: USB hub found [ 1.522410] hub 2-0:1.0: 4 ports detected [ 1.522583] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.522585] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 [ 1.529012] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.529028] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.529029] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.529030] usb usb3: Product: xHCI Host Controller [ 1.529031] usb usb3: Manufacturer: Linux 4.10.0-33-generic xhci-hcd [ 1.529032] usb usb3: SerialNumber: 0000:00:10.0 [ 1.529110] hub 3-0:1.0: USB hub found [ 1.529166] hub 3-0:1.0: 4 ports detected [ 1.529476] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.552024] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.552027] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.552144] mousedev: PS/2 mouse device common for all mice [ 1.552299] rtc_cmos 00:01: RTC can wake from S4 [ 1.552393] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.552420] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.552425] i2c /dev entries driver [ 1.552480] device-mapper: uevent: version 1.0.3 [ 1.552539] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.552754] ledtrig-cpu: registered to indicate activity on CPUs [ 1.552756] EFI Variables Facility v0.08 2004-May-17 [ 1.563384] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.587344] NET: Registered protocol family 10 [ 1.592191] Segment Routing with IPv6 [ 1.592214] NET: Registered protocol family 17 [ 1.592232] Key type dns_resolver registered [ 1.592681] microcode: CPU0: patch_level=0x06006115 [ 1.592687] microcode: CPU1: patch_level=0x06006115 [ 1.592696] microcode: CPU2: patch_level=0x06006115 [ 1.592705] microcode: CPU3: patch_level=0x06006115 [ 1.592742] microcode: Microcode Update Driver: v2.2. [ 1.592893] registered taskstats version 1 [ 1.592905] Loading compiled-in X.509 certificates [ 1.596060] Loaded X.509 cert 'Build time autogenerated kernel key: 5a57f0fc1ea28e22fa277a8a89a08780381b045d' [ 1.596093] zswap: loaded using pool lzo/zbud [ 1.605211] Key type big_key registered [ 1.605218] Key type trusted registered [ 1.607395] Key type encrypted registered [ 1.607400] AppArmor: AppArmor sha1 policy hashing enabled [ 1.607402] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.607428] evm: HMAC attrs: 0x1 [ 1.616977] Magic number: 13:609:305 [ 1.617019] tty tty34: hash matches [ 1.617140] rtc_cmos 00:01: setting system clock to 2017-08-31 00:19:19 UTC (1504138759) [ 1.617352] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.617543] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.617543] EDD information not available. [ 1.617598] PM: Hibernation image not present or could not be loaded. [ 1.649455] ACPI: Battery Slot [BAT1] (battery present) [ 1.651474] Freeing unused kernel memory: 2232K [ 1.651476] Write protecting the kernel read-only data: 14336k [ 1.652088] Freeing unused kernel memory: 1132K [ 1.652856] Freeing unused kernel memory: 276K [ 1.660156] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.677252] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.677339] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.677349] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.677363] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.678060] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.678101] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.679445] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.679494] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.679508] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.679880] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.706023] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.706720] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED [ 1.707076] acpi device:00: registered as cooling_device4 [ 1.707137] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.716279] wmi: Mapper loaded [ 1.719853] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.719864] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.720439] r8169 0000:01:00.0 eth0: RTL8106e at 0xffff9f4e00cc5000, a0:8c:fd:4a:f8:35, XID 04900000 IRQ 33 [ 1.721513] [drm] Initialized [ 1.722215] sdhci: Secure Digital Host Controller Interface driver [ 1.722215] sdhci: Copyright(c) Pierre Ossman [ 1.723641] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1) [ 1.726994] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit [ 1.727797] ahci 0000:00:11.0: version 3.0 [ 1.728018] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.728021] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 1.742927] AVX2 version of gcm_enc/dec engaged. [ 1.742928] AES CTR mode by8 optimization enabled [ 1.753798] scsi host0: ahci [ 1.753923] scsi host1: ahci [ 1.753976] ata1: SATA max UDMA/133 abar m1024@0xf056c000 port 0xf056c100 irq 19 [ 1.753979] ata2: SATA max UDMA/133 abar m1024@0xf056c000 port 0xf056c180 irq 19 [ 1.755926] [drm] amdgpu kernel modesetting enabled. [ 1.758545] AMD IOMMUv2 driver by Joerg Roedel [ 1.762452] Found CRAT image with size=1320 [ 1.762455] Parsing CRAT table with 1 nodes [ 1.762456] Found CU entry in CRAT table with proximity_domain=0 caps=0 [ 1.762457] CU CPU: cores=4 id_base=16 [ 1.762458] Found CU entry in CRAT table with proximity_domain=0 caps=0 [ 1.762459] CU GPU: simds=40 id_base=-2147483648 [ 1.762459] Found memory entry in CRAT table with proximity_domain=0 [ 1.762460] Found cache entry in CRAT table with processor_id=16 [ 1.762461] Found cache entry in CRAT table with processor_id=16 [ 1.762462] Found cache entry in CRAT table with processor_id=16 [ 1.762463] Found cache entry in CRAT table with processor_id=17 [ 1.762463] Found cache entry in CRAT table with processor_id=18 [ 1.762464] Found cache entry in CRAT table with processor_id=18 [ 1.762464] Found cache entry in CRAT table with processor_id=18 [ 1.762465] Found cache entry in CRAT table with processor_id=19 [ 1.762465] Found TLB entry in CRAT table (not processing) [ 1.762466] Found TLB entry in CRAT table (not processing) [ 1.762466] Found TLB entry in CRAT table (not processing) [ 1.762467] Found TLB entry in CRAT table (not processing) [ 1.762467] Found TLB entry in CRAT table (not processing) [ 1.762467] Found TLB entry in CRAT table (not processing) [ 1.762468] Found TLB entry in CRAT table (not processing) [ 1.762468] Found TLB entry in CRAT table (not processing) [ 1.762469] Found TLB entry in CRAT table (not processing) [ 1.762469] Found TLB entry in CRAT table (not processing) [ 1.762470] Creating topology SYSFS entries [ 1.762495] Finished initializing topology ret=0 [ 1.762520] kfd kfd: Initialized module [ 1.762852] checking generic (e0000000 420000) vs hw (e0000000 10000000) [ 1.762854] fb: switching to amdgpudrmfb from EFI VGA [ 1.762886] Console: switching to colour dummy device 80x25 [ 1.763263] [drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x103C:0x81F9 0xCA). [ 1.763276] [drm] register mmio base: 0xF0500000 [ 1.763277] [drm] register mmio size: 262144 [ 1.763283] [drm] doorbell mmio base: 0xF0800000 [ 1.763284] [drm] doorbell mmio size: 8388608 [ 1.763544] [drm] UVD is enabled in physical mode [ 1.763546] [drm] VCE enabled in physical mode [ 1.764684] ATOM BIOS: CARRIZO [ 1.764693] [drm] GPU post is not needed [ 1.765023] amdgpu 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) [ 1.765025] amdgpu 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF [ 1.765032] [drm] Detected VRAM RAM=384M, BAR=256M [ 1.765034] [drm] RAM width 64bits UNKNOWN [ 1.765100] [TTM] Zone kernel: Available graphics memory: 2877182 kiB [ 1.765101] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.765102] [TTM] Initializing pool allocator [ 1.765107] [TTM] Initializing DMA pool allocator [ 1.765152] [drm] amdgpu: 384M of VRAM memory ready [ 1.765153] [drm] amdgpu: 1024M of GTT memory ready. [ 1.765162] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 1.766337] [drm] PCIE GART of 1024M enabled (table at 0x0000000000040000). [ 1.766361] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.766361] [drm] Driver supports precise vblank timestamp query. [ 1.766419] amdgpu 0000:00:01.0: amdgpu: using MSI. [ 1.766440] [drm] amdgpu: irq initialized. [ 1.766449] amdgpu: powerplay initialized [ 1.767420] [drm] amdgpu atom DIG backlight initialized [ 1.767422] [drm] AMDGPU Display Connectors [ 1.767422] [drm] Connector 0: [ 1.767423] [drm] eDP-1 [ 1.767424] [drm] HPD1 [ 1.767425] [drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b [ 1.767426] [drm] Encoders: [ 1.767427] [drm] LCD1: INTERNAL_UNIPHY [ 1.767427] [drm] Connector 1: [ 1.767428] [drm] HDMI-A-1 [ 1.767428] [drm] HPD2 [ 1.767429] [drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f [ 1.767430] [drm] Encoders: [ 1.767430] [drm] DFP1: INTERNAL_UNIPHY [ 1.767431] [drm] Connector 2: [ 1.767432] [drm] DP-1 [ 1.767432] [drm] HPD3 [ 1.767433] [drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873 [ 1.767434] [drm] Encoders: [ 1.767434] [drm] DFP2: INTERNAL_UNIPHY1 [ 1.767916] amdgpu 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000010, cpu addr 0xffff8cef362cd010 [ 1.767964] amdgpu 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000018000020, cpu addr 0xffff8cef362cd020 [ 1.768022] amdgpu 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000018000030, cpu addr 0xffff8cef362cd030 [ 1.768168] amdgpu 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000040, cpu addr 0xffff8cef362cd040 [ 1.768213] amdgpu 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000018000050, cpu addr 0xffff8cef362cd050 [ 1.768255] amdgpu 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000018000060, cpu addr 0xffff8cef362cd060 [ 1.768301] amdgpu 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000018000070, cpu addr 0xffff8cef362cd070 [ 1.768669] amdgpu 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000018000080, cpu addr 0xffff8cef362cd080 [ 1.768711] amdgpu 0000:00:01.0: fence driver on ring 8 use gpu addr 0x0000000018000090, cpu addr 0xffff8cef362cd090 [ 1.768820] amdgpu 0000:00:01.0: fence driver on ring 9 use gpu addr 0x00000000180000a0, cpu addr 0xffff8cef362cd0a0 [ 1.768864] amdgpu 0000:00:01.0: fence driver on ring 10 use gpu addr 0x00000000180000b0, cpu addr 0xffff8cef362cd0b0 [ 1.768991] [drm] Found UVD firmware Version: 1.87 Family ID: 11 [ 1.769857] amdgpu 0000:00:01.0: fence driver on ring 11 use gpu addr 0x00000000002946e0, cpu addr 0xffff9f4e018416e0 [ 1.770001] [drm] Found VCE firmware Version: 52.4 Binary ID: 3 [ 1.770112] amdgpu 0000:00:01.0: fence driver on ring 12 use gpu addr 0x00000000180000d0, cpu addr 0xffff8cef362cd0d0 [ 1.770154] amdgpu 0000:00:01.0: fence driver on ring 13 use gpu addr 0x00000000180000e0, cpu addr 0xffff8cef362cd0e0 [ 1.776090] [drm] ring test on 0 succeeded in 11 usecs [ 1.776304] [drm] ring test on 1 succeeded in 17 usecs [ 1.776357] [drm] ring test on 2 succeeded in 25 usecs [ 1.776382] [drm] ring test on 3 succeeded in 11 usecs [ 1.776409] [drm] ring test on 4 succeeded in 12 usecs [ 1.776437] [drm] ring test on 5 succeeded in 12 usecs [ 1.776464] [drm] ring test on 6 succeeded in 12 usecs [ 1.776491] [drm] ring test on 7 succeeded in 12 usecs [ 1.776519] [drm] ring test on 8 succeeded in 12 usecs [ 1.776557] [drm] ring test on 9 succeeded in 3 usecs [ 1.776564] [drm] ring test on 10 succeeded in 4 usecs [ 1.777705] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 1.849285] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.849311] usb 2-1: new high-speed USB device number 2 using xhci_hcd [ 2.001582] usb 1-1: New USB device found, idVendor=0438, idProduct=7900 [ 2.001584] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.012534] usb 2-1: New USB device found, idVendor=04f2, idProduct=b52d [ 2.012536] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.012538] usb 2-1: Product: HP Webcam [ 2.012539] usb 2-1: Manufacturer: Chicony Electronics Co.,Ltd. [ 2.012541] usb 2-1: SerialNumber: 0x0001 [ 2.133278] usb 2-2: new full-speed USB device number 3 using xhci_hcd [ 2.225288] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.225313] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.226652] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX1R2C, max UDMA/100 [ 2.226654] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.228319] ata1.00: configured for UDMA/100 [ 2.228599] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 2C PQ: 0 ANSI: 5 [ 2.229569] ata2.00: ATAPI: hp DVDRW SU208HB, HH00, max UDMA/100 [ 2.234732] ata2.00: configured for UDMA/100 [ 2.304020] usb 2-2: New USB device found, idVendor=0eef, idProduct=c04d [ 2.304022] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.304024] usb 2-2: Product: eGalaxTouch EXC3000-0367-44.01.00 [ 2.304025] usb 2-2: Manufacturer: eGalax Inc. [ 2.313082] hidraw: raw HID events driver (C) Jiri Kosina [ 2.326709] usbcore: registered new interface driver usbhid [ 2.326710] usbhid: USB HID core driver [ 2.429273] usb 2-3: new high-speed USB device number 4 using xhci_hcd [ 2.454563] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 2.473266] tsc: Refined TSC clocksource calibration: 2395.504 MHz [ 2.473273] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2287a05cb13, max_idle_ns: 440795325721 ns [ 2.484780] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 2.544111] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786 [ 2.581868] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.582874] random: fast init done [ 2.592397] usb 2-3: New USB device found, idVendor=0bc2, idProduct=3200 [ 2.592399] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.592401] usb 2-3: Product: FreeAgent FW [ 2.592402] usb 2-3: Manufacturer: Seagate [ 2.592403] usb 2-3: SerialNumber: 2GEA2GGS [ 2.607848] usb-storage 2-3:1.0: USB Mass Storage device detected [ 2.608117] scsi host2: usb-storage 2-3:1.0 [ 2.608227] usbcore: registered new interface driver usb-storage [ 2.609647] usbcore: registered new interface driver uas [ 2.797960] [drm] ring test on 11 succeeded in 1 usecs [ 2.797962] [drm] UVD initialized successfully. [ 2.798334] hub 1-1:1.0: USB hub found [ 2.798584] hub 1-1:1.0: 4 ports detected [ 2.998001] [drm] ring test on 12 succeeded in 15 usecs [ 2.998012] [drm] ring test on 13 succeeded in 3 usecs [ 2.998012] [drm] VCE initialized successfully. [ 3.007281] [ powerplay ] min_core_set_clock not set [ 3.008827] [ powerplay ] min_core_set_clock not set [ 3.009866] [ powerplay ] min_core_set_clock not set [ 3.181260] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 3.630583] scsi 2:0:0:0: Direct-Access Seagate FreeAgent FW 410G PQ: 0 ANSI: 4 [ 3.638708] clocksource: Switched to clocksource tsc [ 3.638928] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.642959] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.645575] sd 2:0:0:0: [sda] Write Protect is off [ 3.645578] sd 2:0:0:0: [sda] Mode Sense: 1c 00 00 00 [ 3.648314] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.653671] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 3.653764] sd 0:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.653767] sd 0:0:0:0: [sdb] 4096-byte physical blocks [ 3.653974] sd 0:0:0:0: [sdb] Write Protect is off [ 3.653978] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.654072] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.655237] scsi 1:0:0:0: CD-ROM hp DVDRW SU208HB HH00 PQ: 0 ANSI: 5 [ 3.668581] sda: sda1 [ 3.672251] sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.672255] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.672729] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.672872] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 3.678419] [drm] fb mappable at 0xE0615000 [ 3.678420] [drm] vram apper at 0xE0000000 [ 3.678421] [drm] size 4325376 [ 3.678422] [drm] fb depth is 24 [ 3.678423] [drm] pitch is 5632 [ 3.678546] fbcon: amdgpudrmfb (fb0) is primary device [ 3.678624] Console: switching to colour frame buffer device 170x48 [ 3.678648] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device [ 3.683532] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.734552] usb 1-1.1: New USB device found, idVendor=248a, idProduct=8366 [ 3.734555] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.734556] usb 1-1.1: Product: Wireless Receiver [ 3.734558] usb 1-1.1: Manufacturer: Telink [ 3.742495] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:248A:8366.0002/input/input7 [ 3.775764] sdb: sdb1 sdb2 sdb3 [ 3.776425] sd 0:0:0:0: [sdb] Attached SCSI disk [ 3.801929] hid-generic 0003:248A:8366.0002: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:12.0-1.1/input0 [ 3.817194] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 3.897191] usb 1-1.2: device descriptor read/64, error -32 [ 4.089233] usb 1-1.2: device descriptor read/64, error -32 [ 4.277223] usb 1-1.2: new full-speed USB device number 5 using ehci-pci [ 4.361164] usb 1-1.2: device descriptor read/64, error -32 [ 4.909573] [drm] ib test on ring 0 succeeded [ 4.909700] [drm] ib test on ring 1 succeeded [ 4.909756] [drm] ib test on ring 2 succeeded [ 4.909808] [drm] ib test on ring 3 succeeded [ 4.909856] [drm] ib test on ring 4 succeeded [ 4.909901] [drm] ib test on ring 5 succeeded [ 4.909955] [drm] ib test on ring 6 succeeded [ 4.910029] [drm] ib test on ring 7 succeeded [ 4.910101] [drm] ib test on ring 8 succeeded [ 4.910135] [drm] ib test on ring 9 succeeded [ 4.910190] [drm] ib test on ring 10 succeeded [ 5.530310] [ powerplay ] min_core_set_clock not set [ 5.533276] [ powerplay ] min_core_set_clock not set [ 5.932962] [drm] ib test on ring 11 succeeded [ 5.989132] usb 1-1.2: device descriptor read/64, error -32 [ 6.132648] [drm] ib test on ring 12 succeeded [ 6.132768] [ powerplay ] min_core_set_clock not set [ 6.176140] [ powerplay ] min_core_set_clock not set [ 6.177123] usb 1-1.2: new full-speed USB device number 6 using ehci-pci [ 6.177723] [ powerplay ] min_core_set_clock not set [ 6.178661] [ powerplay ] min_core_set_clock not set [ 6.179639] [ powerplay ] min_core_set_clock not set [ 6.180647] [ powerplay ] min_core_set_clock not set [ 6.181647] [ powerplay ] min_core_set_clock not set [ 6.220080] [ powerplay ] min_core_set_clock not set [ 6.220708] [ powerplay ] min_core_set_clock not set [ 6.221720] [ powerplay ] min_core_set_clock not set [ 6.222724] [ powerplay ] min_core_set_clock not set [ 6.593114] usb 1-1.2: device not accepting address 6, error -32 [ 6.673115] usb 1-1.2: new full-speed USB device number 7 using ehci-pci [ 6.978824] kfd kfd: Allocated 3944480 bytes on gart for device(1002:9874) [ 6.978836] amdkfd: adding doorbell packet type capability [ 6.978934] kfd kfd: added device (1002:9874) [ 6.978948] [drm] Initialized amdgpu 3.9.0 20150101 for 0000:00:01.0 on minor 0 [ 7.089017] usb 1-1.2: device not accepting address 7, error -32 [ 7.089326] usb 1-1-port2: unable to enumerate USB device [ 9.231921] random: crng init done [ 12.745215] NET: Registered protocol family 38 [ 19.668894] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 21.807891] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.989979] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 21.990183] systemd[1]: Detected architecture x86-64. [ 22.006879] systemd[1]: Set hostname to . [ 24.050415] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 24.050492] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 24.050664] systemd[1]: Created slice System Slice. [ 24.051270] systemd[1]: Mounting POSIX Message Queue File System... [ 24.051442] systemd[1]: Listening on Journal Audit Socket. [ 24.051555] systemd[1]: Listening on Journal Socket. [ 24.052337] systemd[1]: Starting Uncomplicated firewall... [ 25.239291] lp: driver loaded but no devices found [ 25.563574] ppdev: user-space parallel port driver [ 36.272770] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 36.320142] systemd-journald[428]: Received request to flush runtime journal from PID 1 [ 36.710253] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 36.742027] ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359) [ 36.742037] ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cef408b6438), AE_NOT_FOUND (20160930/psparse-543) [ 36.756448] tpm_crb MSFT0101:00: can't request region for resource [mem 0xdfb7a000-0xdfb7dfff] [ 36.756457] tpm_crb: probe of MSFT0101:00 failed with error -16 [ 36.789725] Initializing HPQ6001 module [ 36.789823] input: HP Wireless hotkeys as /devices/virtual/input/input8 [ 36.806701] ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359) [ 36.806711] ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cef408b6438), AE_NOT_FOUND (20160930/psparse-543) [ 36.807472] AMD0020:00: ttyS4 at MMIO 0xfedc6000 (irq = 10, base_baud = 3000000) is a 16550A [ 36.807950] AMD0020:01: ttyS5 at MMIO 0xfedc8000 (irq = 11, base_baud = 3000000) is a 16550A [ 36.860950] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 36.860953] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ 36.899489] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 37.146190] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 37.146193] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 37.146195] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 37.146197] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 37.146203] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 37.146204] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 37.146206] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 37.158712] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input9 [ 37.158788] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input10 [ 37.193697] kvm: Nested Virtualization enabled [ 37.193700] kvm: Nested Paging enabled [ 37.196621] EDAC MC: Ver: 3.0.0 [ 37.198466] MCE: In-kernel MCE decoding enabled. [ 37.200120] EDAC amd64: DRAM ECC disabled. [ 37.200123] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 37.257038] EDAC amd64: DRAM ECC disabled. [ 37.257041] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 37.297135] EDAC amd64: DRAM ECC disabled. [ 37.297137] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 37.535713] rtl8188ee: rtl8188ee: Power Save off (module option) [ 37.535714] rtl8188ee: rtl8188ee: FW Power Save off (module option) [ 37.535743] rtl8188ee: Using firmware rtlwifi/rtl8188efw.bin [ 37.541458] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 37.541802] rtlwifi: rtlwifi: wireless switch is on [ 38.069529] input: eGalax Inc. eGalaxTouch EXC3000-0367-44.01.00 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:0EEF:C04D.0001/input/input12 [ 38.070122] hid-multitouch 0003:0EEF:C04D.0001: input,hiddev0,hidraw1: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC3000-0367-44.01.00] on usb-0000:00:10.0-2/input0 [ 38.107444] media: Linux media interface: v0.10 [ 38.187852] Linux video capture interface: v2.00 [ 38.287190] input: HP WMI hotkeys as /devices/virtual/input/input11 [ 38.369071] sr 1:0:0:0: [sr0] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 38.369075] sr 1:0:0:0: [sr0] tag#25 Sense Key : Illegal Request [current] [ 38.369078] sr 1:0:0:0: [sr0] tag#25 Add. Sense: Read of scrambled sector without authentication [ 38.369081] sr 1:0:0:0: [sr0] tag#25 CDB: Read(10) 28 00 00 34 0a 00 00 00 40 00 [ 38.369083] blk_update_request: I/O error, dev sr0, sector 13641728 [ 38.485320] sr 1:0:0:0: [sr0] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 38.485324] sr 1:0:0:0: [sr0] tag#27 Sense Key : Illegal Request [current] [ 38.485327] sr 1:0:0:0: [sr0] tag#27 Add. Sense: Read of scrambled sector without authentication [ 38.485367] sr 1:0:0:0: [sr0] tag#27 CDB: Read(10) 28 00 00 34 0a 02 00 00 02 00 [ 38.485370] blk_update_request: I/O error, dev sr0, sector 13641736 [ 38.485377] Buffer I/O error on dev sr0, logical block 1705217, async page read [ 38.540711] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b52d) [ 38.547831] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 38.547857] uvcvideo 2-1:1.0: Entity type for entity Extension 7 was not initialized! [ 38.547859] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 38.547861] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 38.547974] input: HP Webcam as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input14 [ 38.548059] usbcore: registered new interface driver uvcvideo [ 38.548060] USB Video Class driver (1.1.1) [ 38.733155] sr 1:0:0:0: [sr0] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 38.733158] sr 1:0:0:0: [sr0] tag#28 Sense Key : Illegal Request [current] [ 38.733161] sr 1:0:0:0: [sr0] tag#28 Add. Sense: Read of scrambled sector without authentication [ 38.733186] sr 1:0:0:0: [sr0] tag#28 CDB: Read(10) 28 00 00 00 04 00 00 00 02 00 [ 38.733188] blk_update_request: I/O error, dev sr0, sector 4096 [ 38.806304] sr 1:0:0:0: [sr0] tag#29 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 38.806308] sr 1:0:0:0: [sr0] tag#29 Sense Key : Illegal Request [current] [ 38.806312] sr 1:0:0:0: [sr0] tag#29 Add. Sense: Read of scrambled sector without authentication [ 38.806315] sr 1:0:0:0: [sr0] tag#29 CDB: Read(10) 28 00 00 00 04 00 00 00 02 00 [ 38.806318] blk_update_request: I/O error, dev sr0, sector 4096 [ 38.806324] Buffer I/O error on dev sr0, logical block 512, async page read [ 39.165594] rtl8188ee 0000:02:00.0 wlo1: renamed from wlan0 [ 39.920430] snd_hda_intel 0000:00:01.1: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001 [ 39.925371] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15 [ 41.516146] Adding 5864956k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:5864956k FS [ 41.634187] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 42.412321] audit: type=1400 audit(1504138800.293:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=1019 comm="apparmor_parser" [ 42.412325] audit: type=1400 audit(1504138800.293:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=1020 comm="apparmor_parser" [ 42.414350] audit: type=1400 audit(1504138800.293:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1024 comm="apparmor_parser" [ 42.414626] audit: type=1400 audit(1504138800.293:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1022 comm="apparmor_parser" [ 42.414628] audit: type=1400 audit(1504138800.293:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1022 comm="apparmor_parser" [ 42.414630] audit: type=1400 audit(1504138800.293:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1022 comm="apparmor_parser" [ 42.414632] audit: type=1400 audit(1504138800.293:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1022 comm="apparmor_parser" [ 42.414795] audit: type=1400 audit(1504138800.293:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_i2p" pid=1023 comm="apparmor_parser" [ 42.416178] audit: type=1400 audit(1504138800.293:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1021 comm="apparmor_parser" [ 42.416182] audit: type=1400 audit(1504138800.293:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1021 comm="apparmor_parser" [ 45.941237] vboxdrv: loading out-of-tree module taints kernel. [ 45.941620] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 45.946344] vboxdrv: Found 4 processor cores [ 45.964290] vboxdrv: TSC mode is Invariant, tentative frequency 2395439321 Hz [ 45.964291] vboxdrv: Successfully loaded version 5.1.20 (interface 0x00280000) [ 46.170089] VBoxNetFlt: Successfully started. [ 46.172013] VBoxNetAdp: Successfully started. [ 46.173979] VBoxPciLinuxInit [ 46.176677] vboxpci: IOMMU found [ 47.467446] [ powerplay ] min_core_set_clock not set [ 47.468395] [ powerplay ] min_core_set_clock not set [ 47.469414] [ powerplay ] min_core_set_clock not set [ 47.470404] [ powerplay ] min_core_set_clock not set [ 47.479707] [ powerplay ] min_core_set_clock not set [ 47.480466] [ powerplay ] min_core_set_clock not set [ 47.482254] [ powerplay ] min_core_set_clock not set [ 47.483646] [ powerplay ] min_core_set_clock not set [ 47.929357] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 48.145398] r8169 0000:01:00.0 enp1s0: link down [ 48.145511] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 48.152923] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 48.335201] [ powerplay ] min_core_set_clock not set [ 48.336179] [ powerplay ] min_core_set_clock not set [ 48.337173] [ powerplay ] min_core_set_clock not set [ 48.338031] [ powerplay ] min_core_set_clock not set [ 48.605464] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 49.034933] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 49.206535] [ powerplay ] min_core_set_clock not set [ 49.207824] [ powerplay ] min_core_set_clock not set [ 49.208797] [ powerplay ] min_core_set_clock not set [ 49.209662] [ powerplay ] min_core_set_clock not set [ 49.210856] [ powerplay ] min_core_set_clock not set [ 49.211812] [ powerplay ] min_core_set_clock not set [ 49.212790] [ powerplay ] min_core_set_clock not set [ 49.213677] [ powerplay ] min_core_set_clock not set [ 49.214806] [ powerplay ] min_core_set_clock not set [ 49.215819] [ powerplay ] min_core_set_clock not set [ 49.216826] [ powerplay ] min_core_set_clock not set [ 49.217677] [ powerplay ] min_core_set_clock not set [ 49.218803] [ powerplay ] min_core_set_clock not set [ 49.219837] [ powerplay ] min_core_set_clock not set [ 49.220685] [ powerplay ] min_core_set_clock not set [ 49.221659] [ powerplay ] min_core_set_clock not set [ 49.378869] [ powerplay ] min_core_set_clock not set [ 49.380159] [ powerplay ] min_core_set_clock not set [ 49.381105] [ powerplay ] min_core_set_clock not set [ 49.381984] [ powerplay ] min_core_set_clock not set [ 49.405773] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 50.825720] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 50.874639] wlo1: authenticate with c8:3a:35:03:61:30 [ 50.884957] wlo1: send auth to c8:3a:35:03:61:30 (try 1/3) [ 50.886768] wlo1: authenticated [ 50.888197] wlo1: associate with c8:3a:35:03:61:30 (try 1/3) [ 50.891758] wlo1: RX AssocResp from c8:3a:35:03:61:30 (capab=0x411 status=0 aid=2) [ 50.892206] wlo1: associated [ 50.892223] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 53.420194] [ powerplay ] min_core_set_clock not set [ 53.421528] [ powerplay ] min_core_set_clock not set [ 53.422607] [ powerplay ] min_core_set_clock not set [ 53.423487] [ powerplay ] min_core_set_clock not set [ 81.006968] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 81.214945] EXT4-fs (sda1): recovery complete [ 81.247870] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 82.010846] UDF-fs: INFO Mounting volume 'D1_BALLIN_IN_THE_STREETS', timestamp 2017/05/01 11:55 (1000) [ 884.026447] usb 1-1.2: new full-speed USB device number 8 using ehci-pci [ 884.106449] usb 1-1.2: device descriptor read/64, error -32 [ 884.298467] usb 1-1.2: device descriptor read/64, error -32 [ 884.486402] usb 1-1.2: new full-speed USB device number 9 using ehci-pci [ 884.570376] usb 1-1.2: device descriptor read/64, error -32 [ 884.758504] usb 1-1.2: device descriptor read/64, error -32 [ 884.946369] usb 1-1.2: new full-speed USB device number 10 using ehci-pci [ 885.362477] usb 1-1.2: device not accepting address 10, error -32 [ 885.446470] usb 1-1.2: new full-speed USB device number 11 using ehci-pci [ 885.862254] usb 1-1.2: device not accepting address 11, error -32 [ 885.862367] usb 1-1-port2: unable to enumerate USB device [ 1160.972520] usb 1-1.2: new full-speed USB device number 12 using ehci-pci [ 1161.072605] usb 1-1.2: device descriptor read/64, error -32 [ 1161.268443] usb 1-1.2: device descriptor read/64, error -32 [ 1205.216312] show_signal_msg: 28 callbacks suppressed [ 1205.216317] apache2[14829]: segfault at 7fd8a6c2a5a0 ip 00007fd8a6c2a5a0 sp 00007ffcc7c7a5c8 error 14 in libdl-2.24.so[7fd8a8cd6000+3000]