[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a0beb623-52b8-4892-8bd1-cb686d08ddce ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] modified: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] modified: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] modified: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ 12000-14000 [ 0.000000] RAMDISK: 377fe000 - 37fef691 [ 0.000000] ACPI: RSDP 00000000000fb8b0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff90100 00054 (v01 031309 XSDT1456 20090313 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 031309 FACP1456 20090313 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557) [ 0.000000] ACPI: DSDT 00000000cff90440 0D129 (v01 A1150 A1150000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cffa8000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 0006C (v01 031309 APIC1456 20090313 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90400 0003C (v01 031309 OEMMCFG 20090313 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 031309 OEMB1456 20090313 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff9f440 00038 (v01 031309 OEMHPET 20090313 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9f480 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000005dfff] pages 46 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377fe000 - 0037fef691] RAMDISK ==> [00377fe000 - 0037fef691] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a30290] BRK ==> [0001a30000 - 0001a30290] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096927 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000 [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ff00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065465 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a0beb623-52b8-4892-8bd1-cb686d08ddce ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 2122000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 8186068k/9175040k available (5422k kernel code, 787332k absent, 201640k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3010.018 MHz processor. [ 0.030005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6020.02 BogoMIPS (lpj=30100140) [ 0.030020] Security Framework initialized [ 0.030033] AppArmor: AppArmor initialized [ 0.030504] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.032900] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.033969] Mount-cache hash table entries: 256 [ 0.034062] Initializing cgroup subsys ns [ 0.034065] Initializing cgroup subsys cpuacct [ 0.034068] Initializing cgroup subsys memory [ 0.034073] Initializing cgroup subsys devices [ 0.034075] Initializing cgroup subsys freezer [ 0.034076] Initializing cgroup subsys net_cls [ 0.034090] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.034092] CPU: L2 Cache: 512K (64 bytes/line) [ 0.034094] CPU 0/0x0 -> Node 0 [ 0.034096] tseg: 0000000000 [ 0.034106] CPU: Physical Processor ID: 0 [ 0.034107] CPU: Processor Core ID: 0 [ 0.034109] mce: CPU supports 6 MCE banks [ 0.034117] using C1E aware idle routine [ 0.034119] Performance Events: AMD PMU driver. [ 0.034122] ... version: 0 [ 0.034123] ... bit width: 48 [ 0.034124] ... generic registers: 4 [ 0.034125] ... value mask: 0000ffffffffffff [ 0.034127] ... max period: 00007fffffffffff [ 0.034128] ... fixed-purpose events: 0 [ 0.034129] ... event mask: 000000000000000f [ 0.035354] ACPI: Core revision 20090903 [ 0.059321] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.059324] ftrace: allocating 22527 entries in 89 pages [ 0.060052] Setting APIC routing to flat [ 0.060351] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.164607] CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02 [ 0.170000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.040000] Initializing CPU#1 [ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.040000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.040000] CPU 1/0x1 -> Node 0 [ 0.040000] CPU: Physical Processor ID: 0 [ 0.040000] CPU: Processor Core ID: 1 [ 0.320072] CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02 [ 0.320078] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.330050] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.040000] Initializing CPU#2 [ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.040000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.040000] CPU 2/0x2 -> Node 0 [ 0.040000] CPU: Physical Processor ID: 0 [ 0.040000] CPU: Processor Core ID: 2 [ 0.490050] CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02 [ 0.490055] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.500051] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.040000] Initializing CPU#3 [ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.040000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.040000] CPU 3/0x3 -> Node 0 [ 0.040000] CPU: Physical Processor ID: 0 [ 0.040000] CPU: Processor Core ID: 3 [ 0.660024] CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02 [ 0.660029] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.670008] Brought up 4 CPUs [ 0.670010] Total of 4 processors activated (24081.07 BogoMIPS). [ 0.671849] CPU0 attaching sched-domain: [ 0.671851] domain 0: span 0-3 level MC [ 0.671852] groups: 0 1 2 3 [ 0.671856] CPU1 attaching sched-domain: [ 0.671858] domain 0: span 0-3 level MC [ 0.671859] groups: 1 2 3 0 [ 0.671862] CPU2 attaching sched-domain: [ 0.671863] domain 0: span 0-3 level MC [ 0.671865] groups: 2 3 0 1 [ 0.671867] CPU3 attaching sched-domain: [ 0.671869] domain 0: span 0-3 level MC [ 0.671870] groups: 3 0 1 2 [ 0.671940] devtmpfs: initialized [ 0.671940] regulator: core version 0.5 [ 0.671940] Time: 18:27:21 Date: 08/20/10 [ 0.671940] NET: Registered protocol family 16 [ 0.671940] node 0 link 0: io port [1000, ffffff] [ 0.671940] TOM: 00000000d0000000 aka 3328M [ 0.671940] Trying to unpack rootfs image as initramfs... [ 0.671940] Fam 10h mmconf [e0000000, efffffff] [ 0.671940] node 0 link 0: mmio [a0000, bffff] [ 0.671940] node 0 link 0: mmio [d0000000, dfffffff] [ 0.671940] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.671940] node 0 link 0: mmio [f0000000, ffefffff] [ 0.671940] TOM2: 0000000230000000 aka 8960M [ 0.671940] bus: [00,07] on node 0 link 0 [ 0.671940] bus: 00 index 0 io port: [0, ffff] [ 0.671940] bus: 00 index 1 mmio: [a0000, bffff] [ 0.671940] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.671940] bus: 00 index 3 mmio: [f0000000, ffffffff] [ 0.671940] bus: 00 index 4 mmio: [230000000, fcffffffff] [ 0.671940] ACPI: bus type pci registered [ 0.671940] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.671940] PCI: Not using MMCONFIG. [ 0.671940] PCI: Using configuration type 1 for base access [ 0.671940] PCI: Using configuration type 1 for extended access [ 0.671940] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.671940] mtrr: probably your BIOS does not setup all CPUs. [ 0.671940] mtrr: corrected configuration. [ 0.671940] bio: create slab at 0 [ 0.671940] ACPI: EC: Look up EC in DSDT [ 0.672137] ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND [ 0.672141] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81a0e440), AE_NOT_FOUND [ 0.672218] ACPI Error (dswload-0781): [PRID] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.672222] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230) [ 0.672225] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81a0e440), AE_ALREADY_EXISTS [ 0.672228] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error [ 0.672283] ACPI Error (dsfield-0487): [SMIC] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.672342] ACPI: Executed 4 blocks of module-level executable AML code [ 0.803462] Freeing initrd memory: 8133k freed [ 0.862328] ACPI: Interpreter enabled [ 0.862335] ACPI: (supports S0 S3 S4 S5) [ 0.862353] ACPI: Using IOAPIC for interrupt routing [ 0.862405] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.865527] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.870942] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.875902] ACPI Warning: Incorrect checksum in table [OEMB] - E6, should be DE (20090903/tbutils-314) [ 0.875981] ACPI: No dock devices found. [ 0.876104] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.876186] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.876189] pci 0000:00:02.0: PME# disabled [ 0.876221] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.876223] pci 0000:00:06.0: PME# disabled [ 0.876273] pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007] [ 0.876279] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003] [ 0.876286] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007] [ 0.876292] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003] [ 0.876297] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f] [ 0.876303] pci 0000:00:11.0: reg 24 32bit mmio: [0xfbcffc00-0xfbcfffff] [ 0.876320] pci 0000:00:11.0: set SATA to AHCI mode [ 0.876361] pci 0000:00:12.0: reg 10 32bit mmio: [0xfbcfd000-0xfbcfdfff] [ 0.876412] pci 0000:00:12.1: reg 10 32bit mmio: [0xfbcfe000-0xfbcfefff] [ 0.876479] pci 0000:00:12.2: reg 10 32bit mmio: [0xfbcff800-0xfbcff8ff] [ 0.876527] pci 0000:00:12.2: supports D1 D2 [ 0.876528] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.876532] pci 0000:00:12.2: PME# disabled [ 0.876561] pci 0000:00:13.0: reg 10 32bit mmio: [0xfbcfb000-0xfbcfbfff] [ 0.876612] pci 0000:00:13.1: reg 10 32bit mmio: [0xfbcfc000-0xfbcfcfff] [ 0.876678] pci 0000:00:13.2: reg 10 32bit mmio: [0xfbcff400-0xfbcff4ff] [ 0.876726] pci 0000:00:13.2: supports D1 D2 [ 0.876728] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.876731] pci 0000:00:13.2: PME# disabled [ 0.876838] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.876844] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.876850] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.876856] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.876862] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.876986] pci 0000:00:14.5: reg 10 32bit mmio: [0xfbcfa000-0xfbcfafff] [ 0.877107] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.877114] pci 0000:01:00.0: reg 18 64bit mmio: [0xfbde0000-0xfbdeffff] [ 0.877119] pci 0000:01:00.0: reg 20 io port: [0xc000-0xc0ff] [ 0.877126] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbdc0000-0xfbddffff] [ 0.877141] pci 0000:01:00.0: supports D1 D2 [ 0.877168] pci 0000:01:00.1: reg 10 64bit mmio: [0xfbdfc000-0xfbdfffff] [ 0.877197] pci 0000:01:00.1: supports D1 D2 [ 0.877245] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] [ 0.877247] pci 0000:00:02.0: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 0.877250] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.877291] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbec0000-0xfbefffff] [ 0.877298] pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc7f] [ 0.877345] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.877349] pci 0000:02:00.0: PME# disabled [ 0.877400] pci 0000:00:06.0: bridge io port: [0xd000-0xdfff] [ 0.877402] pci 0000:00:06.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.877452] pci 0000:03:07.0: reg 10 io port: [0xe880-0xe8bf] [ 0.877509] pci 0000:03:07.0: supports D1 D2 [ 0.877547] pci 0000:03:07.1: reg 10 io port: [0xec00-0xec07] [ 0.877603] pci 0000:03:07.1: supports D1 D2 [ 0.877645] pci 0000:03:07.2: reg 10 32bit mmio: [0xfbfff800-0xfbffffff] [ 0.877653] pci 0000:03:07.2: reg 14 32bit mmio: [0xfbff8000-0xfbffbfff] [ 0.877708] pci 0000:03:07.2: supports D1 D2 [ 0.877709] pci 0000:03:07.2: PME# supported from D0 D1 D2 D3hot [ 0.877713] pci 0000:03:07.2: PME# disabled [ 0.877763] pci 0000:00:14.4: transparent bridge [ 0.877767] pci 0000:00:14.4: bridge io port: [0xe000-0xefff] [ 0.877770] pci 0000:00:14.4: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.877785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.877946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.877996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.878064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.881502] ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 12 14 15) [ 0.881592] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15) [ 0.881680] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.881767] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15) [ 0.881854] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.881943] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.882030] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15) [ 0.882118] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 *11 12 14 15) [ 0.882201] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.882204] vgaarb: loaded [ 0.882276] SCSI subsystem initialized [ 0.882317] libata version 3.00 loaded. [ 0.882317] usbcore: registered new interface driver usbfs [ 0.882317] usbcore: registered new interface driver hub [ 0.882317] usbcore: registered new device driver usb [ 0.882317] ACPI: WMI: Mapper loaded [ 0.882317] PCI: Using ACPI for IRQ routing [ 0.882317] NetLabel: Initializing [ 0.882317] NetLabel: domain hash size = 128 [ 0.882317] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.882317] NetLabel: unlabeled traffic allowed by default [ 0.882317] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.882317] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.882317] Switching to clocksource tsc [ 0.882317] AppArmor: AppArmor Filesystem Enabled [ 0.882317] pnp: PnP ACPI init [ 0.882317] ACPI: bus type pnp registered [ 0.883851] pnp: PnP ACPI: found 13 devices [ 0.883852] ACPI: ACPI bus type pnp unregistered [ 0.883862] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.883864] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.883868] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.883869] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.883871] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.883873] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.883875] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.883876] system 00:08: ioport range 0xc50-0xc51 has been reserved [ 0.883878] system 00:08: ioport range 0xc52-0xc52 has been reserved [ 0.883880] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.883881] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.883883] system 00:08: ioport range 0xcd0-0xcd1 has been reserved [ 0.883885] system 00:08: ioport range 0xcd2-0xcd3 has been reserved [ 0.883886] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 0.883888] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.883890] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 0.883892] system 00:08: ioport range 0x800-0x89f has been reserved [ 0.883893] system 00:08: ioport range 0xb00-0xb3f has been reserved [ 0.883895] system 00:08: ioport range 0xb00-0xb0f has been reserved [ 0.883897] system 00:08: ioport range 0xb20-0xb3f has been reserved [ 0.883899] system 00:08: ioport range 0x900-0x90f has been reserved [ 0.883900] system 00:08: ioport range 0x910-0x91f has been reserved [ 0.883902] system 00:08: ioport range 0xfe00-0xfefe has been reserved [ 0.883904] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.883906] system 00:08: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.883911] system 00:0a: ioport range 0x230-0x23f has been reserved [ 0.883913] system 00:0a: ioport range 0x290-0x29f has been reserved [ 0.883915] system 00:0a: ioport range 0xf40-0xf4f has been reserved [ 0.883916] system 00:0a: ioport range 0xa30-0xa3f has been reserved [ 0.883919] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.883923] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.883924] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.883926] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.883928] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved [ 0.883930] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.888564] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.888566] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.888569] pci 0000:00:02.0: MEM window: 0xfbd00000-0xfbdfffff [ 0.888571] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.888574] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 [ 0.888576] pci 0000:00:06.0: IO window: 0xd000-0xdfff [ 0.888579] pci 0000:00:06.0: MEM window: 0xfbe00000-0xfbefffff [ 0.888580] pci 0000:00:06.0: PREFETCH window: disabled [ 0.888583] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.888586] pci 0000:00:14.4: IO window: 0xe000-0xefff [ 0.888590] pci 0000:00:14.4: MEM window: 0xfbf00000-0xfbffffff [ 0.888594] pci 0000:00:14.4: PREFETCH window: disabled [ 0.888604] alloc irq_desc for 18 on node 0 [ 0.888605] alloc kstat_irqs on node 0 [ 0.888609] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.888612] pci 0000:00:02.0: setting latency timer to 64 [ 0.888616] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.888618] pci 0000:00:06.0: setting latency timer to 64 [ 0.888625] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.888626] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.888628] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.888630] pci_bus 0000:01: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 0.888631] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.888633] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.888635] pci_bus 0000:02: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.888636] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.888638] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.888640] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.888641] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.888664] NET: Registered protocol family 2 [ 0.888822] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.889897] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.892171] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.892445] TCP: Hash tables configured (established 524288 bind 65536) [ 0.892446] TCP reno registered [ 0.892518] NET: Registered protocol family 1 [ 2.450036] pci 0000:01:00.0: Boot video device [ 2.450165] PCI-DMA: Disabling AGP. [ 2.450247] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 2.450248] PCI-DMA: using GART IOMMU. [ 2.450251] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 2.452211] Scanning for low memory corruption every 60 seconds [ 2.452306] audit: initializing netlink socket (disabled) [ 2.452315] type=2000 audit(1282328842.450:1): initialized [ 2.458500] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.459402] VFS: Disk quotas dquot_6.5.2 [ 2.459436] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.459829] fuse init (API version 7.13) [ 2.459880] msgmni has been set to 16004 [ 2.460079] alg: No test for stdrng (krng) [ 2.460116] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.460119] io scheduler noop registered [ 2.460120] io scheduler anticipatory registered [ 2.460121] io scheduler deadline registered [ 2.460145] io scheduler cfq registered (default) [ 2.460250] alloc irq_desc for 25 on node 0 [ 2.460251] alloc kstat_irqs on node 0 [ 2.460257] pcieport 0000:00:02.0: irq 25 for MSI/MSI-X [ 2.460262] pcieport 0000:00:02.0: setting latency timer to 64 [ 2.460346] alloc irq_desc for 26 on node 0 [ 2.460347] alloc kstat_irqs on node 0 [ 2.460350] pcieport 0000:00:06.0: irq 26 for MSI/MSI-X [ 2.460354] pcieport 0000:00:06.0: setting latency timer to 64 [ 2.460397] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.460411] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.460475] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.460478] ACPI: Power Button [PWRB] [ 2.460504] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.460506] ACPI: Power Button [PWRF] [ 2.461167] processor LNXCPU:00: registered as cooling_device0 [ 2.461563] processor LNXCPU:01: registered as cooling_device1 [ 2.461962] processor LNXCPU:02: registered as cooling_device2 [ 2.462359] processor LNXCPU:03: registered as cooling_device3 [ 2.464860] Linux agpgart interface v0.103 [ 2.464880] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.465581] brd: module loaded [ 2.465844] loop: module loaded [ 2.465893] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.466009] alloc irq_desc for 16 on node 0 [ 2.466011] alloc kstat_irqs on node 0 [ 2.466015] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.466037] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 2.466231] Fixed MDIO Bus: probed [ 2.466250] PPP generic driver version 2.4.2 [ 2.466271] tun: Universal TUN/TAP device driver, 1.6 [ 2.466272] tun: (C) 1999-2004 Max Krasnyansky [ 2.466316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.466344] alloc irq_desc for 17 on node 0 [ 2.466345] alloc kstat_irqs on node 0 [ 2.466347] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.466375] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.466393] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.466413] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 2.466425] ehci_hcd 0000:00:12.2: debug port 1 [ 2.466443] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcff800 [ 2.480022] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.480092] usb usb1: configuration #1 chosen from 1 choice [ 2.480109] hub 1-0:1.0: USB hub found [ 2.480114] hub 1-0:1.0: 6 ports detected [ 2.480196] alloc irq_desc for 19 on node 0 [ 2.480197] alloc kstat_irqs on node 0 [ 2.480201] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.480213] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.480233] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.480249] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 2.480261] ehci_hcd 0000:00:13.2: debug port 1 [ 2.480278] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcff400 [ 2.500019] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.500076] usb usb2: configuration #1 chosen from 1 choice [ 2.500090] hub 2-0:1.0: USB hub found [ 2.500096] hub 2-0:1.0: 6 ports detected [ 2.500145] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.500183] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.500195] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.500216] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 2.500236] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcfd000 [ 2.564094] usb usb3: configuration #1 chosen from 1 choice [ 2.564110] hub 3-0:1.0: USB hub found [ 2.564117] hub 3-0:1.0: 3 ports detected [ 2.564187] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.564197] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 2.564216] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.564229] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcfe000 [ 2.624086] usb usb4: configuration #1 chosen from 1 choice [ 2.624101] hub 4-0:1.0: USB hub found [ 2.624108] hub 4-0:1.0: 3 ports detected [ 2.624179] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.624192] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.624216] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.624237] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfb000 [ 2.684100] usb usb5: configuration #1 chosen from 1 choice [ 2.684115] hub 5-0:1.0: USB hub found [ 2.684122] hub 5-0:1.0: 3 ports detected [ 2.684192] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.684202] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.684226] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.684239] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfc000 [ 2.744090] usb usb6: configuration #1 chosen from 1 choice [ 2.744107] hub 6-0:1.0: USB hub found [ 2.744114] hub 6-0:1.0: 3 ports detected [ 2.744186] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.744198] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.744217] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.744230] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcfa000 [ 2.804099] usb usb7: configuration #1 chosen from 1 choice [ 2.804115] hub 7-0:1.0: USB hub found [ 2.804122] hub 7-0:1.0: 2 ports detected [ 2.804158] uhci_hcd: USB Universal Host Controller Interface driver [ 2.804199] PNP: No PS/2 controller found. Probing ports directly. [ 2.804558] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.804562] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.804618] mice: PS/2 mouse device common for all mice [ 2.804681] rtc_cmos 00:03: RTC can wake from S4 [ 2.804703] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.804725] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.804795] device-mapper: uevent: version 1.0.3 [ 2.804855] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.804945] device-mapper: multipath: version 1.1.0 loaded [ 2.804946] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.805114] cpuidle: using governor ladder [ 2.805115] cpuidle: using governor menu [ 2.805329] TCP cubic registered [ 2.805401] NET: Registered protocol family 10 [ 2.805684] lo: Disabled Privacy Extensions [ 2.805858] NET: Registered protocol family 17 [ 2.805899] powernow-k8: Found 1 AMD Phenom(tm) II X4 940 Processor processors (4 cpu cores) (version 2.20.00) [ 2.805927] powernow-k8: 0 : pstate 0 (3000 MHz) [ 2.805928] powernow-k8: 1 : pstate 1 (2300 MHz) [ 2.805929] powernow-k8: 2 : pstate 2 (1800 MHz) [ 2.805930] powernow-k8: 3 : pstate 3 (800 MHz) [ 2.806535] PM: Resume from disk failed. [ 2.806541] registered taskstats version 1 [ 2.806814] Magic number: 6:351:494 [ 2.806875] rtc_cmos 00:03: setting system clock to 2010-08-20 18:27:23 UTC (1282328843) [ 2.806877] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.806878] EDD information not available. [ 2.806909] Freeing unused kernel memory: 880k freed [ 2.807084] Write protecting the kernel read-only data: 7696k [ 2.817418] udev: starting version 151 [ 2.840838] ahci 0000:00:11.0: version 3.0 [ 2.840856] alloc irq_desc for 22 on node 0 [ 2.840858] alloc kstat_irqs on node 0 [ 2.840864] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.841049] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.841052] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.841347] ATL1E 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.841353] ATL1E 0000:02:00.0: setting latency timer to 64 [ 2.846279] Floppy drive(s): fd0 is 1.44M [ 2.848245] scsi0 : ahci [ 2.849523] scsi1 : ahci [ 2.850084] scsi2 : ahci [ 2.850139] scsi3 : ahci [ 2.850179] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 [ 2.850182] ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 22 [ 2.850185] ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 22 [ 2.850188] ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 22 [ 2.850486] scsi4 : pata_atiixp [ 2.850532] scsi5 : pata_atiixp [ 2.851504] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.851506] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.865098] FDC 0 is a post-1991 82077 [ 3.070454] ata5.00: HPA unlocked: 625140335 -> 625142448, native 625142448 [ 3.070458] ata5.00: ATA-6: WDC WD3200JB-00KFA0, 08.05J08, max UDMA/100 [ 3.070460] ata5.00: 625142448 sectors, multi 16: LBA48 [ 3.109985] ata5.01: HPA unlocked: 625140335 -> 625142448, native 625142448 [ 3.109988] ata5.01: ATA-7: WDC WD3200AAJB-00TYA0, 00.02C01, max UDMA/100 [ 3.109990] ata5.01: 625142448 sectors, multi 16: LBA48 [ 3.130604] ata5.00: configured for UDMA/100 [ 3.150670] ata5.01: configured for UDMA/100 [ 3.250021] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 3.380022] ata4: softreset failed (device not ready) [ 3.380024] ata4: applying SB600 PMP SRST workaround and retrying [ 3.380040] ata2: softreset failed (device not ready) [ 3.380042] ata2: applying SB600 PMP SRST workaround and retrying [ 3.380056] ata3: softreset failed (device not ready) [ 3.380058] ata3: applying SB600 PMP SRST workaround and retrying [ 3.442199] usb 3-1: configuration #1 chosen from 1 choice [ 3.450253] usbcore: registered new interface driver hiddev [ 3.450321] usbcore: registered new interface driver usbhid [ 3.450323] usbhid: v2.6:USB HID core driver [ 3.570033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.570054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.570070] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.570403] ata4.00: ATAPI: ATAPI iHAS422 8, 4L11, max UDMA/100 [ 3.570610] ata2.00: ATA-7: ST3250310AS, 3.AAF, max UDMA/133 [ 3.570612] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.570904] ata3.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133 [ 3.570906] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.571249] ata4.00: configured for UDMA/100 [ 3.571347] ata2.00: configured for UDMA/133 [ 3.571862] ata3.00: configured for UDMA/133 [ 3.760024] usb 3-2: new low speed USB device using ohci_hcd and address 3 [ 3.790028] ata1: softreset failed (device not ready) [ 3.790033] ata1: applying SB600 PMP SRST workaround and retrying [ 3.953217] usb 3-2: configuration #1 chosen from 1 choice [ 3.961309] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3 [ 3.961363] generic-usb 0003:046D:C01D.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2/input0 [ 3.970031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.970619] ata1.00: ATA-8: ST3250310AS, 3.ADA, max UDMA/133 [ 3.970621] ata1.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.971348] ata1.00: configured for UDMA/133 [ 3.990088] scsi 0:0:0:0: Direct-Access ATA ST3250310AS 3.AD PQ: 0 ANSI: 5 [ 3.990203] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.990273] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB) [ 3.990303] sd 0:0:0:0: [sda] Write Protect is off [ 3.990305] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.990314] scsi 1:0:0:0: Direct-Access ATA ST3250310AS 3.AA PQ: 0 ANSI: 5 [ 3.990318] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.990416] sda: [ 3.990426] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.990450] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.990452] sd 1:0:0:0: [sdb] Write Protect is off [ 3.990454] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.990468] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.990542] scsi 2:0:0:0: Direct-Access ATA WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5 [ 3.990624] sd 2:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 3.990632] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.990651] sd 2:0:0:0: [sdc] Write Protect is off [ 3.990653] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.990698] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.990713] sdb: [ 3.990783] sdc: [ 3.991818] scsi 3:0:0:0: CD-ROM ATAPI iHAS422 8 4L11 PQ: 0 ANSI: 5 [ 3.996065] sdc1 [ 3.996216] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.996338] sdb1 [ 3.996478] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.998254] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.998256] Uniform CD-ROM driver Revision: 3.20 [ 3.998321] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.998354] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 3.998441] scsi 4:0:0:0: Direct-Access ATA WDC WD3200JB-00K 08.0 PQ: 0 ANSI: 5 [ 3.998531] sd 4:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.998541] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 3.998556] sd 4:0:0:0: [sdd] Write Protect is off [ 3.998558] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.998571] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.998594] scsi 4:0:1:0: Direct-Access ATA WDC WD3200AAJB-0 00.0 PQ: 0 ANSI: 5 [ 3.998662] sdd: [ 3.998677] sd 4:0:1:0: Attached scsi generic sg5 type 0 [ 3.998680] sd 4:0:1:0: [sde] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 4.003824] sda2 < sdd1 [ 4.006157] sd 4:0:1:0: [sde] Write Protect is off [ 4.006160] sd 4:0:1:0: [sde] Mode Sense: 00 3a 00 00 [ 4.006173] sd 4:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.006290] sd 4:0:0:0: [sdd] Attached SCSI disk [ 4.006294] sde: sda5 sde1 [ 4.014458] sd 4:0:1:0: [sde] Attached SCSI disk [ 4.015759] sda6 sda7 > [ 4.029659] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.163481] alloc irq_desc for 23 on node 0 [ 4.163483] alloc kstat_irqs on node 0 [ 4.163489] ohci1394 0000:03:07.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 4.168330] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input4 [ 4.168380] logitech 0003:046D:C517.0001: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-1/input0 [ 4.176171] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 4.176583] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input5 [ 4.176680] logitech 0003:046D:C517.0002: input,hiddev96,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input1 [ 4.220061] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[fbfff800-fbffffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.270024] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 4.456355] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 4.471285] usb 4-1: configuration #1 chosen from 1 choice [ 5.540153] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c01510509a1] [ 12.708746] Adding 4000144k swap on /dev/sda5. Priority:-1 extents:1 across:4000144k [ 12.714872] udev: starting version 151 [ 12.729970] lp: driver loaded but no devices found [ 12.735545] vga16fb: initializing [ 12.735549] vga16fb: mapped to 0xffff8800000a0000 [ 12.735602] fb0: VGA16 VGA frame buffer device [ 12.780140] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 12.780143] Disabling lock debugging due to kernel taint [ 12.836462] [fglrx] Maximum main memory to use for locked dma buffers: 7770 MBytes. [ 12.836587] [fglrx] vendor: 1002 device: 9442 count: 1 [ 12.837713] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 12.837716] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.840844] EDAC MC: Ver: 2.1.0 Jul 28 2010 [ 12.841115] [fglrx] ioport: bar 4, base 0xc000, size: 0x100 [ 12.841127] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 12.841131] pci 0000:01:00.0: setting latency timer to 64 [ 12.841420] [fglrx] Kernel PAT support is enabled [ 12.841435] [fglrx] module loaded - fglrx 8.75.5 [Jun 29 2010] with 1 minors [ 12.843283] EDAC amd64_edac: Ver: 3.2.0 Jul 28 2010 [ 12.843707] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 12.843714] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 12.843715] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 12.843716] (Note that use of the override may cause unknown side effects.) [ 12.843728] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 12.856013] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input6 [ 12.856164] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.2/input/input7 [ 12.856273] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.4/input/input8 [ 12.856363] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.6/input/input9 [ 12.856446] usbcore: registered new interface driver xpad [ 12.856448] xpad: X-Box pad driver [ 12.896662] gameport: EMU10K1 is pci0000:03:07.1/gameport0, io 0xec00, speed 527kHz [ 12.913443] EMU10K1_Audigy 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.921253] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350] [ 12.929672] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.929704] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 13.008039] Console: switching to colour frame buffer device 80x30 [ 13.009970] type=1505 audit(1282343253.696:2): operation="profile_load" pid=745 name="/sbin/dhclient3" [ 13.010161] type=1505 audit(1282343253.696:3): operation="profile_load" pid=745 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.010263] type=1505 audit(1282343253.696:4): operation="profile_load" pid=745 name="/usr/lib/connman/scripts/dhclient-script" [ 13.801608] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 14.620224] type=1505 audit(1282343255.313:5): operation="profile_load" pid=1084 name="/usr/share/gdm/guest-session/Xsession" [ 14.621096] type=1505 audit(1282343255.313:6): operation="profile_replace" pid=1085 name="/sbin/dhclient3" [ 14.621347] type=1505 audit(1282343255.313:7): operation="profile_replace" pid=1085 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.621454] type=1505 audit(1282343255.313:8): operation="profile_replace" pid=1085 name="/usr/lib/connman/scripts/dhclient-script" [ 14.623220] type=1505 audit(1282343255.313:9): operation="profile_load" pid=1086 name="/usr/bin/evince" [ 14.625543] type=1505 audit(1282343255.313:10): operation="profile_load" pid=1086 name="/usr/bin/evince-previewer" [ 14.627019] type=1505 audit(1282343255.313:11): operation="profile_load" pid=1086 name="/usr/bin/evince-thumbnailer" [ 14.758923] alloc irq_desc for 27 on node 0 [ 14.758925] alloc kstat_irqs on node 0 [ 14.758937] ATL1E 0000:02:00.0: irq 27 for MSI/MSI-X [ 14.759063] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<1000 Mbps Full Duplex> [ 14.759772] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.760473] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.016102] /dev/vmmon[1262]: Module vmmon: registered with major=10 minor=165 [ 15.016111] /dev/vmmon[1262]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 15.016116] /dev/vmmon[1262]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 15.016118] /dev/vmmon[1262]: Module vmmon: initialized [ 15.021462] /dev/vmci[1270]: VMCI: Driver initialized. [ 15.021560] /dev/vmci[1270]: Module vmci: registered with major=10 minor=55 [ 15.021562] /dev/vmci[1270]: Module vmci: initialized [ 15.064063] ppdev: user-space parallel port driver [ 15.067938] /dev/vmnet: open called by PID 1332 (vmnet-bridge) [ 15.067943] /dev/vmnet: hub 0 does not exist, allocating memory. [ 15.067956] /dev/vmnet: port on hub 0 successfully opened [ 15.067965] bridge-eth0: up [ 15.067967] bridge-eth0: attached [ 15.143819] alloc irq_desc for 28 on node 0 [ 15.143821] alloc kstat_irqs on node 0 [ 15.143830] fglrx_pci 0000:01:00.0: irq 28 for MSI/MSI-X [ 15.144275] [fglrx] Firegl kernel thread PID: 1339 [ 15.144459] [fglrx] IRQ 28 Enabled [ 15.650672] /dev/vmnet: open called by PID 1340 (vmnet-dhcpd) [ 15.650677] /dev/vmnet: hub 1 does not exist, allocating memory. [ 15.650693] /dev/vmnet: port on hub 1 successfully opened [ 15.651738] /dev/vmnet: open called by PID 1342 (vmnet-netifup) [ 15.651746] /dev/vmnet: port on hub 1 successfully opened [ 15.693127] /dev/vmnet: open called by PID 1346 (vmnet-dhcpd) [ 15.693134] /dev/vmnet: hub 8 does not exist, allocating memory. [ 15.693148] /dev/vmnet: port on hub 8 successfully opened [ 15.695369] /dev/vmnet: open called by PID 1350 (vmnet-natd) [ 15.695376] /dev/vmnet: port on hub 8 successfully opened [ 15.696667] /dev/vmnet: open called by PID 1351 (vmnet-netifup) [ 15.696674] /dev/vmnet: port on hub 8 successfully opened [ 16.163367] [fglrx] Gart USWC size:1280 M. [ 16.163370] [fglrx] Gart cacheable size:508 M. [ 16.163374] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 16.163376] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000 [ 16.163378] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 18.798521] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.010280] /dev/vmmon[10]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445461730453842372 new 18445461730452024478 attempts 1 [ 23.809606] cscotun0: Disabled Privacy Extensions [ 25.140019] eth0: no IPv6 routers present [ 26.420027] vmnet1: no IPv6 routers present [ 26.680012] vmnet8: no IPv6 routers present [ 433.536372] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 698.071944] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 698.221896] usb 1-5: configuration #1 chosen from 1 choice [ 698.264000] Initializing USB Mass Storage driver... [ 698.264403] scsi6 : SCSI emulation for USB Mass Storage devices [ 698.264607] usbcore: registered new interface driver usb-storage [ 698.264614] USB Mass Storage support registered. [ 698.264805] usb-storage: device found at 5 [ 698.264809] usb-storage: waiting for device to settle before scanning [ 703.260832] usb-storage: device scan complete [ 705.298442] scsi 6:0:0:0: Direct-Access Samsung STORY Station PQ: 0 ANSI: 2 CCS [ 705.299332] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 713.327488] sd 6:0:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 713.328222] sd 6:0:0:0: [sdf] Write Protect is off [ 713.328229] sd 6:0:0:0: [sdf] Mode Sense: 28 00 00 00 [ 713.328235] sd 6:0:0:0: [sdf] Assuming drive cache: write through [ 713.329720] sd 6:0:0:0: [sdf] Assuming drive cache: write through [ 713.329728] sdf: sdf1 [ 713.348987] sd 6:0:0:0: [sdf] Assuming drive cache: write through [ 713.348997] sd 6:0:0:0: [sdf] Attached SCSI disk [ 2538.902972] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2538.906301] SGI XFS Quota Management subsystem [ 2538.917706] JFS: nTxBlock = 8192, nTxLock = 65536 [ 2538.950959] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 2538.977304] QNX4 filesystem 0.2.3 registered. [ 2539.013717] Btrfs loaded [ 2539.621484] EXT4-fs (sdd1): mounted filesystem with ordered data mode [ 2619.228597] EXT4-fs (sdd1): mounted filesystem with ordered data mode