[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-18-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu4) ) #27-Ubuntu SMP Fri Mar 26 21:13:44 UTC 2010 (Ubuntu 2.6.32-18.27-generic 2.6.32.10+drm33.1) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-18-generic root=UUID=4cc255d2-e393-4a94-b359-cd0db76435b3 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 base 00D0000000 mask FFF8000000 write-combining [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff8000 (ACPI data) [ 0.000000] modified: 000000003fff8000 - 0000000040000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 003fe00000 page 2M [ 0.000000] 003fe00000 - 003fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 3fff0000 @ 10000-13000 [ 0.000000] RAMDISK: 2f863000 - 3003398f [ 0.000000] ACPI: RSDP 00000000000fa0c0 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 000000003fff0000 0002C (v01 AMIINT VIA_K8 00000010 MSFT 00000097) [ 0.000000] ACPI: FACP 000000003fff0030 00081 (v01 AMIINT VIA_K8 00000011 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000003fff0120 036C5 (v01 VIA VIA_K8 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 000000003fff8000 00040 [ 0.000000] ACPI: APIC 000000003fff00c0 00054 (v01 AMIINT VIA_K8 00000009 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff] [ 0.000000] bootmap [0000000000016000 - 000000000001dfff] pages 8 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a27e64] TEXT DATA BSS ==> [0001000000 - 0001a27e64] [ 0.000000] #3 [002f863000 - 003003398f] RAMDISK ==> [002f863000 - 003003398f] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a28000 - 0001a28130] BRK ==> [0001a28000 - 0001a28130] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] found SMP MP-table at [ffff8800000fba70] fba70 [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002000000-ffff880002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 100 pages reserved [ 0.000000] DMA zone: 3827 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3528 pages used for memmap [ 0.000000] DMA32 zone: 254504 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91480 r8192 d23208 u2097152 [ 0.000000] pcpu-alloc: s91480 r8192 d23208 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258331 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-18-generic root=UUID=4cc255d2-e393-4a94-b359-cd0db76435b3 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ d0000000 old size 32 MB [ 0.000000] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20) [ 0.000000] Node 0: aperture @ d0000000 size 128 MB [ 0.000000] Memory: 1015060k/1048512k available (5407k kernel code, 452k absent, 33000k reserved, 2969k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:256 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 10485760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2199.692 MHz processor. [ 0.010008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.38 BogoMIPS (lpj=21996920) [ 0.010047] Security Framework initialized [ 0.010084] AppArmor: AppArmor initialized [ 0.010210] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.011504] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.012134] Mount-cache hash table entries: 256 [ 0.012367] Initializing cgroup subsys ns [ 0.012372] Initializing cgroup subsys cpuacct [ 0.012377] Initializing cgroup subsys memory [ 0.012395] Initializing cgroup subsys devices [ 0.012398] Initializing cgroup subsys freezer [ 0.012400] Initializing cgroup subsys net_cls [ 0.012430] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012433] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012436] CPU 0/0x0 -> Node 0 [ 0.012438] tseg: 0000000000 [ 0.012463] mce: CPU supports 5 MCE banks [ 0.012482] Performance Events: AMD PMU driver. [ 0.012490] ... version: 0 [ 0.012492] ... bit width: 48 [ 0.012493] ... generic registers: 4 [ 0.012495] ... value mask: 0000ffffffffffff [ 0.012497] ... max period: 00007fffffffffff [ 0.012499] ... fixed-purpose events: 0 [ 0.012501] ... event mask: 000000000000000f [ 0.012517] SMP alternatives: switching to UP code [ 0.027490] Freeing SMP alternatives: 40k freed [ 0.027538] ACPI: Core revision 20090903 [ 0.032950] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.032958] ftrace: allocating 22512 entries in 89 pages [ 0.039827] Setting APIC routing to flat [ 0.040000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.130655] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00 [ 0.140000] Brought up 1 CPUs [ 0.140000] Total of 1 processors activated (4399.38 BogoMIPS). [ 0.140000] CPU0 attaching NULL sched-domain. [ 0.140000] devtmpfs: initialized [ 0.140000] regulator: core version 0.5 [ 0.140000] Time: 17:15:29 Date: 03/31/10 [ 0.140000] NET: Registered protocol family 16 [ 0.140000] node 0 link 0: io port [0, ffffff] [ 0.140000] TOM: 0000000040000000 aka 1024M [ 0.140000] node 0 link 0: mmio [a0000, bffff] [ 0.140000] node 0 link 0: mmio [40000000, ffffffff] [ 0.140000] bus: [00,ff] on node 0 link 0 [ 0.140000] bus: 00 index 0 io port: [0, ffff] [ 0.140000] bus: 00 index 1 mmio: [a0000, bffff] [ 0.140000] bus: 00 index 2 mmio: [40000000, fcffffffff] [ 0.140000] ACPI: bus type pci registered [ 0.140000] PCI: Using configuration type 1 for base access [ 0.140000] bio: create slab at 0 [ 0.140000] ACPI: EC: Look up EC in DSDT [ 0.140000] ACPI Warning: Package List length (0x25) larger than NumElements count (0x4), truncated [ 0.140000] (20090903/dsobject-515) [ 0.140000] ACPI: Interpreter enabled [ 0.140000] ACPI: (supports S0 S3 S4 S5) [ 0.140000] ACPI: Using IOAPIC for interrupt routing [ 0.140000] ACPI: Power Resource [URP1] (off) [ 0.140037] ACPI: Power Resource [URP2] (off) [ 0.140062] ACPI: Power Resource [FDDP] (off) [ 0.140087] ACPI: Power Resource [LPTP] (off) [ 0.140213] ACPI: No dock devices found. [ 0.140596] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.140648] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.140734] pci 0000:00:01.0: supports D1 [ 0.140766] pci 0000:00:06.0: reg 10 io port: [0xec00-0xecff] [ 0.140772] pci 0000:00:06.0: reg 14 32bit mmio: [0xcfffff00-0xcfffffff] [ 0.140802] pci 0000:00:06.0: supports D1 D2 [ 0.140805] pci 0000:00:06.0: PME# supported from D1 D2 D3hot D3cold [ 0.140809] pci 0000:00:06.0: PME# disabled [ 0.140839] pci 0000:00:07.0: reg 10 32bit mmio: [0xcfffb800-0xcfffbbff] [ 0.140873] pci 0000:00:07.0: supports D1 D2 [ 0.140901] pci 0000:00:08.0: reg 10 32bit mmio: [0xcfffd000-0xcfffdfff] [ 0.140933] pci 0000:00:08.0: supports D1 D2 [ 0.140935] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot [ 0.140938] pci 0000:00:08.0: PME# disabled [ 0.140966] pci 0000:00:08.1: reg 10 32bit mmio: [0xcfffe000-0xcfffefff] [ 0.140998] pci 0000:00:08.1: supports D1 D2 [ 0.141000] pci 0000:00:08.1: PME# supported from D0 D1 D2 D3hot [ 0.141003] pci 0000:00:08.1: PME# disabled [ 0.141030] pci 0000:00:08.2: reg 10 32bit mmio: [0xcffffe00-0xcffffeff] [ 0.141062] pci 0000:00:08.2: supports D1 D2 [ 0.141064] pci 0000:00:08.2: PME# supported from D0 D1 D2 D3hot [ 0.141068] pci 0000:00:08.2: PME# disabled [ 0.141103] pci 0000:00:0b.0: reg 10 io port: [0xe800-0xe8ff] [ 0.141109] pci 0000:00:0b.0: reg 14 32bit mmio: [0xcffffd00-0xcffffdff] [ 0.141127] pci 0000:00:0b.0: reg 30 32bit mmio pref: [0xcffc0000-0xcffdffff] [ 0.141142] pci 0000:00:0b.0: supports D1 D2 [ 0.141144] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold [ 0.141147] pci 0000:00:0b.0: PME# disabled [ 0.141193] pci 0000:00:0f.0: reg 20 io port: [0xfc00-0xfc0f] [ 0.141253] pci 0000:00:10.0: reg 20 io port: [0xd800-0xd81f] [ 0.141274] pci 0000:00:10.0: supports D1 D2 [ 0.141276] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141279] pci 0000:00:10.0: PME# disabled [ 0.141319] pci 0000:00:10.1: reg 20 io port: [0xdc00-0xdc1f] [ 0.141339] pci 0000:00:10.1: supports D1 D2 [ 0.141341] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141345] pci 0000:00:10.1: PME# disabled [ 0.141387] pci 0000:00:10.2: reg 20 io port: [0xe000-0xe01f] [ 0.141407] pci 0000:00:10.2: supports D1 D2 [ 0.141409] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141412] pci 0000:00:10.2: PME# disabled [ 0.141452] pci 0000:00:10.3: reg 20 io port: [0xe400-0xe41f] [ 0.141472] pci 0000:00:10.3: supports D1 D2 [ 0.141474] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141478] pci 0000:00:10.3: PME# disabled [ 0.141505] pci 0000:00:10.4: reg 10 32bit mmio: [0xcffffb00-0xcffffbff] [ 0.141538] pci 0000:00:10.4: supports D1 D2 [ 0.141540] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141543] pci 0000:00:10.4: PME# disabled [ 0.141596] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.141642] pci 0000:00:11.5: reg 10 io port: [0xd400-0xd4ff] [ 0.141677] pci 0000:00:11.5: supports D1 D2 [ 0.141777] pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff] [ 0.141781] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xc0000000-0xc7ffffff] [ 0.141786] pci 0000:01:00.0: reg 18 32bit mmio pref: [0xcdc80000-0xcdcfffff] [ 0.141795] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xcfee0000-0xcfefffff] [ 0.141828] pci 0000:00:01.0: bridge 32bit mmio: [0xcde00000-0xcfefffff] [ 0.141831] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbdc00000-0xcdcfffff] [ 0.141841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.160295] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.160380] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.160464] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 0.160547] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.160631] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.160720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.160804] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.160889] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.161009] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.161011] vgaarb: loaded [ 0.161146] SCSI subsystem initialized [ 0.161265] libata version 3.00 loaded. [ 0.161350] usbcore: registered new interface driver usbfs [ 0.161362] usbcore: registered new interface driver hub [ 0.161392] usbcore: registered new device driver usb [ 0.161519] ACPI: WMI: Mapper loaded [ 0.161521] PCI: Using ACPI for IRQ routing [ 0.161532] pci 0000:00:00.0: BAR 0: address space collision on of device [0xd0000000-0xd7ffffff] [ 0.161534] pci 0000:00:00.0: BAR 0: can't allocate resource [ 0.161694] NetLabel: Initializing [ 0.161696] NetLabel: domain hash size = 128 [ 0.161697] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.161715] NetLabel: unlabeled traffic allowed by default [ 0.161753] Switching to clocksource tsc [ 0.163797] AppArmor: AppArmor Filesystem Enabled [ 0.163832] pnp: PnP ACPI init [ 0.163864] ACPI: bus type pnp registered [ 0.165526] pnp: PnP ACPI: found 8 devices [ 0.165528] ACPI: ACPI bus type pnp unregistered [ 0.165545] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.165548] system 00:02: ioport range 0x3f0-0x3f1 has been reserved [ 0.165551] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.165553] system 00:02: ioport range 0x400-0x40f has been reserved [ 0.165556] system 00:02: ioport range 0x820-0x821 has been reserved [ 0.165560] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.170000] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.170000] pci 0000:00:01.0: IO window: disabled [ 0.170000] pci 0000:00:01.0: MEM window: 0xcde00000-0xcfefffff [ 0.170000] pci 0000:00:01.0: PREFETCH window: 0xbdc00000-0xcdcfffff [ 0.170000] pci 0000:00:01.0: setting latency timer to 64 [ 0.170000] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.170000] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.170000] pci_bus 0000:01: resource 1 mem: [0xcde00000-0xcfefffff] [ 0.170000] pci_bus 0000:01: resource 2 pref mem [0xbdc00000-0xcdcfffff] [ 0.170000] NET: Registered protocol family 2 [ 0.170000] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.170000] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.171934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.173144] TCP: Hash tables configured (established 131072 bind 65536) [ 0.173147] TCP reno registered [ 0.173285] NET: Registered protocol family 1 [ 0.173312] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.173428] pci 0000:01:00.0: Boot video device [ 0.173614] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188] [ 0.180478] Trying to unpack rootfs image as initramfs... [ 0.188489] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 0.188710] Scanning for low memory corruption every 60 seconds [ 0.188872] audit: initializing netlink socket (disabled) [ 0.188891] type=2000 audit(1270055729.188:1): initialized [ 0.208655] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.210047] VFS: Disk quotas dquot_6.5.2 [ 0.210107] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.210775] fuse init (API version 7.13) [ 0.210862] msgmni has been set to 1982 [ 0.218566] alg: No test for stdrng (krng) [ 0.218720] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.218723] io scheduler noop registered [ 0.218726] io scheduler anticipatory registered [ 0.218728] io scheduler deadline registered [ 0.218763] io scheduler cfq registered (default) [ 0.218935] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.218959] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.219068] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.219072] ACPI: Power Button [PWRB] [ 0.219123] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.219131] ACPI: Sleep Button [SLPB] [ 0.219172] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.219174] ACPI: Power Button [PWRF] [ 0.219385] processor LNXCPU:00: registered as cooling_device0 [ 0.222388] Linux agpgart interface v0.103 [ 0.222427] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.223656] brd: module loaded [ 0.224134] loop: module loaded [ 0.224242] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.228358] alloc irq_desc for 20 on node 0 [ 0.228363] alloc kstat_irqs on node 0 [ 0.228376] pata_acpi 0000:00:0f.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.228451] pata_acpi 0000:00:0f.0: PCI INT A disabled [ 0.228855] Fixed MDIO Bus: probed [ 0.228892] PPP generic driver version 2.4.2 [ 0.228985] tun: Universal TUN/TAP device driver, 1.6 [ 0.228987] tun: (C) 1999-2004 Max Krasnyansky [ 0.229097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.229135] alloc irq_desc for 17 on node 0 [ 0.229137] alloc kstat_irqs on node 0 [ 0.229141] ehci_hcd 0000:00:08.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [ 0.229163] ehci_hcd 0000:00:08.2: EHCI Host Controller [ 0.229194] ehci_hcd 0000:00:08.2: new USB bus registered, assigned bus number 1 [ 0.258436] ehci_hcd 0000:00:08.2: irq 17, io mem 0xcffffe00 [ 0.278342] ehci_hcd 0000:00:08.2: USB 2.0 started, EHCI 1.00 [ 0.278521] usb usb1: configuration #1 chosen from 1 choice [ 0.278560] hub 1-0:1.0: USB hub found [ 0.278577] hub 1-0:1.0: 5 ports detected [ 0.288630] alloc irq_desc for 21 on node 0 [ 0.288635] alloc kstat_irqs on node 0 [ 0.288649] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.288681] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.288789] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2 [ 0.288870] ehci_hcd 0000:00:10.4: irq 21, io mem 0xcffffb00 [ 0.308335] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.308543] usb usb2: configuration #1 chosen from 1 choice [ 0.308581] hub 2-0:1.0: USB hub found [ 0.308595] hub 2-0:1.0: 8 ports detected [ 0.308716] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.318480] alloc irq_desc for 19 on node 0 [ 0.318485] alloc kstat_irqs on node 0 [ 0.318500] ohci_hcd 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.318533] ohci_hcd 0000:00:08.0: OHCI Host Controller [ 0.318658] ohci_hcd 0000:00:08.0: new USB bus registered, assigned bus number 3 [ 0.318716] ohci_hcd 0000:00:08.0: irq 19, io mem 0xcfffd000 [ 0.433325] Freeing initrd memory: 8002k freed [ 0.442825] usb usb3: configuration #1 chosen from 1 choice [ 0.442860] hub 3-0:1.0: USB hub found [ 0.442877] hub 3-0:1.0: 3 ports detected [ 0.443080] alloc irq_desc for 16 on node 0 [ 0.443083] alloc kstat_irqs on node 0 [ 0.443094] ohci_hcd 0000:00:08.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.443127] ohci_hcd 0000:00:08.1: OHCI Host Controller [ 0.443174] ohci_hcd 0000:00:08.1: new USB bus registered, assigned bus number 4 [ 0.443234] ohci_hcd 0000:00:08.1: irq 16, io mem 0xcfffe000 [ 0.528363] usb usb4: configuration #1 chosen from 1 choice [ 0.528389] hub 4-0:1.0: USB hub found [ 0.528400] hub 4-0:1.0: 2 ports detected [ 0.528460] uhci_hcd: USB Universal Host Controller Interface driver [ 0.528566] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.528575] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.528608] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 0.528630] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800 [ 0.528742] usb usb5: configuration #1 chosen from 1 choice [ 0.528765] hub 5-0:1.0: USB hub found [ 0.528776] hub 5-0:1.0: 2 ports detected [ 0.528852] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.528857] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.528899] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6 [ 0.528918] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00 [ 0.529014] usb usb6: configuration #1 chosen from 1 choice [ 0.529037] hub 6-0:1.0: USB hub found [ 0.529046] hub 6-0:1.0: 2 ports detected [ 0.529117] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.529122] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.529157] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7 [ 0.529176] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 [ 0.529271] usb usb7: configuration #1 chosen from 1 choice [ 0.529294] hub 7-0:1.0: USB hub found [ 0.529304] hub 7-0:1.0: 2 ports detected [ 0.529370] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.529376] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.529411] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 8 [ 0.529431] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400 [ 0.529521] usb usb8: configuration #1 chosen from 1 choice [ 0.529549] hub 8-0:1.0: USB hub found [ 0.529561] hub 8-0:1.0: 2 ports detected [ 0.529650] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.529652] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.529817] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.529911] mice: PS/2 mouse device common for all mice [ 0.530027] rtc_cmos 00:04: RTC can wake from S4 [ 0.530081] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.530126] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.530291] device-mapper: uevent: version 1.0.3 [ 0.530456] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.530508] device-mapper: multipath: version 1.1.0 loaded [ 0.530512] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.530653] cpuidle: using governor ladder [ 0.530656] cpuidle: using governor menu [ 0.531034] TCP cubic registered [ 0.531157] NET: Registered protocol family 10 [ 0.531630] lo: Disabled Privacy Extensions [ 0.531913] NET: Registered protocol family 17 [ 0.531951] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) [ 0.532007] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 [ 0.532009] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 [ 0.532011] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa [ 0.532013] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 0.532153] PM: Resume from disk failed. [ 0.532169] registered taskstats version 1 [ 0.532489] Magic number: 2:833:290 [ 0.532527] tty tty23: hash matches [ 0.532597] rtc_cmos 00:04: setting system clock to 2010-03-31 17:15:30 UTC (1270055730) [ 0.532600] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.532602] EDD information not available. [ 0.532664] Freeing unused kernel memory: 876k freed [ 0.533529] Write protecting the kernel read-only data: 7676k [ 0.550542] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.560502] udev: starting version 151 [ 0.598338] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 0.751973] usb 1-5: configuration #1 chosen from 1 choice [ 0.769759] pata_via 0000:00:0f.0: version 0.3.4 [ 0.769779] pata_via 0000:00:0f.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.780050] scsi0 : pata_via [ 0.788864] scsi1 : pata_via [ 0.792677] FDC 0 is a post-1991 82077 [ 0.792957] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.792960] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.793797] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.793822] r8169 0000:00:0b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.793836] r8169 0000:00:0b.0: PCI: Disallowing DAC for device [ 0.793858] r8169 0000:00:0b.0: no PCI Express capability [ 0.794449] eth0: RTL8110s at 0xffffc9000055ad00, 00:11:09:cf:3d:5a, XID 04000000 IRQ 16 [ 0.797592] Initializing USB Mass Storage driver... [ 0.797720] scsi2 : SCSI emulation for USB Mass Storage devices [ 0.797843] usbcore: registered new interface driver usb-storage [ 0.797845] USB Mass Storage support registered. [ 0.797914] usb-storage: device found at 2 [ 0.797915] usb-storage: waiting for device to settle before scanning [ 0.988898] ata1.00: ATA-5: ST380021A, 3.75, max UDMA/100 [ 0.988900] ata1.00: 156301488 sectors, multi 16: LBA [ 0.989055] ata1.01: ATA-7: ST3250823A, 3.03, max UDMA/100 [ 0.989057] ata1.01: 488397168 sectors, multi 16: LBA48 [ 1.028750] ata1.00: configured for UDMA/100 [ 1.068731] ata1.01: configured for UDMA/100 [ 1.068867] scsi 0:0:0:0: Direct-Access ATA ST380021A 3.75 PQ: 0 ANSI: 5 [ 1.069045] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.069321] scsi 0:0:1:0: Direct-Access ATA ST3250823A 3.03 PQ: 0 ANSI: 5 [ 1.069419] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.069719] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.069762] sd 0:0:0:0: [sda] Write Protect is off [ 1.069765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.069786] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.069924] sda: sda1 sda2 < sda5 [ 1.096434] sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.112547] sda6 sda7 sda8 > [ 1.139881] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.139911] sd 0:0:1:0: [sdb] Write Protect is off [ 1.139914] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.139933] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.140061] sdb: sdb1 [ 1.160873] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.270015] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 1.450395] ata2.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-105S 0122, E1.22, max UDMA/33 [ 1.450425] ata2.01: ATAPI: LITE-ON LTR-24102B, 5S5A, max UDMA/33 [ 1.450794] usb 5-2: configuration #1 chosen from 1 choice [ 1.490303] ata2.00: configured for UDMA/33 [ 1.530248] ata2.01: configured for UDMA/33 [ 1.532803] scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-105 1.22 PQ: 0 ANSI: 5 [ 1.535714] sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray [ 1.535718] Uniform CD-ROM driver Revision: 3.20 [ 1.535943] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.536053] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.536374] scsi 1:0:1:0: CD-ROM LITE-ON LTR-24102B 5S5A PQ: 0 ANSI: 5 [ 1.538019] sr1: scsi3-mmc drive: 41x/40x writer cd/rw xa/form2 cdda tray [ 1.538204] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.538295] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.559211] usbcore: registered new interface driver hiddev [ 1.559724] usbcore: registered new interface driver usbhid [ 1.559798] usbhid: v2.6:USB HID core driver [ 1.594166] input: Microsoft SideWinder Game Voice as /devices/pci0000:00/0000:00:10.0/usb5/5-2/5-2:1.0/input/input5 [ 1.594692] microsoft 0003:045E:003B.0001: input,hiddev96,hidraw0: USB HID v1.00 Device [Microsoft SideWinder Game Voice] on usb-0000:00:10.0-2/input0 [ 1.730092] usb 8-1: new full speed USB device using uhci_hcd and address 2 [ 1.966634] usb 8-1: configuration #1 chosen from 1 choice [ 1.972639] input: USB Sound Device as /devices/pci0000:00/0000:00:10.3/usb8/8-1/8-1:1.3/input/input6 [ 1.972763] generic-usb 0003:0D8C:0102.0002: input,hidraw1: USB HID v1.00 Device [USB Sound Device ] on usb-0000:00:10.3-1/input3 [ 2.250054] usb 8-2: new low speed USB device using uhci_hcd and address 3 [ 2.392802] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 2.427642] usb 8-2: configuration #1 chosen from 1 choice [ 2.442830] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.3/usb8/8-2/8-2:1.0/input/input7 [ 2.442924] generic-usb 0003:046D:C012.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.3-2/input0 [ 5.790627] usb-storage: device scan complete [ 5.791246] scsi 2:0:0:0: Direct-Access WD 10EAVS External 1.65 PQ: 0 ANSI: 4 [ 5.791720] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 5.792349] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 5.793096] sd 2:0:0:0: [sdc] Write Protect is off [ 5.793099] sd 2:0:0:0: [sdc] Mode Sense: 21 00 00 00 [ 5.793101] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 5.794594] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 5.794597] sdc: sdc1 [ 6.370224] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 6.370228] sd 2:0:0:0: [sdc] Attached SCSI disk [ 14.653516] Adding 2152668k swap on /dev/sda7. Priority:-1 extents:1 across:2152668k [ 14.722377] udev: starting version 151 [ 14.860373] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.885942] lp: driver loaded but no devices found [ 14.961769] type=1505 audit(1270048544.927:2): operation="profile_load" pid=378 name="/sbin/dhclient3" [ 14.962040] type=1505 audit(1270048544.927:3): operation="profile_load" pid=378 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.962190] type=1505 audit(1270048544.927:4): operation="profile_load" pid=378 name="/usr/lib/connman/scripts/dhclient-script" [ 15.041535] cfg80211: Calling CRDA to update world regulatory domain [ 15.204428] EDAC MC: Ver: 2.1.0 Mar 26 2010 [ 15.210894] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406] [ 15.210948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.426088] vga16fb: initializing [ 15.426095] vga16fb: mapped to 0xffff8800000a0000 [ 15.426180] fb0: VGA16 VGA frame buffer device [ 15.428938] EDAC amd64_edac: Ver: 3.2.0 Mar 26 2010 [ 15.438980] cfg80211: World regulatory domain updated: [ 15.438985] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.438989] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.438992] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.438994] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.438996] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.438999] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.441865] Linux video capture interface: v2.00 [ 15.445901] EDAC amd64: ECC is enabled by BIOS. [ 15.446000] EDAC MC: Rev E or earlier detected [ 15.446080] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 15.446110] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 15.483643] rtl8180 0000:00:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 15.740912] saa7130/34: v4l2 driver version 0.2.15 loaded [ 15.851054] phy0: Selected rate control algorithm 'minstrel' [ 15.851752] phy0: hwaddr 00:30:bd:4e:87:b4, RTL8180 + Philips [ 15.878200] alloc irq_desc for 18 on node 0 [ 15.878204] alloc kstat_irqs on node 0 [ 15.878216] saa7134 0000:00:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 15.878224] saa7134[0]: found at 0000:00:07.0, rev: 1, irq: 18, latency: 32, mmio: 0xcfffb800 [ 15.878231] saa7134[0]: subsystem: 153b:1158, board: Terratec Cinergy 600 TV MK3 [card=48,autodetected] [ 15.878254] saa7134[0]: board init: gpio is 50000 [ 15.878544] input: saa7134 IR (Terratec Cinergy 60 as /devices/pci0000:00/0000:00:07.0/input/input8 [ 15.878682] IRQ 18/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 16.149247] usbcore: registered new interface driver snd-usb-audio [ 16.178951] saa7134[0]: i2c eeprom 00: 3b 15 58 11 ff ff ff ff ff ff ff ff ff ff ff ff [ 16.178959] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.178965] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.178970] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.178975] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.178979] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.178984] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.178989] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.179115] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.179120] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.179125] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.179130] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.179135] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.179140] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.179145] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.179149] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 16.179236] i2c i2c-0: Invalid 7-bit address 0x7a [ 16.179928] Console: switching to colour frame buffer device 80x30 [ 16.350392] tuner 0-0043: chip found @ 0x86 (saa7134[0]) [ 16.362578] tda9887 0-0043: creating new instance [ 16.362583] tda9887 0-0043: tda988[5/6/7] found [ 16.430044] All bytes are equal. It is not a TEA5767 [ 16.430193] tuner 0-0060: chip found @ 0xc0 (saa7134[0]) [ 16.460079] tuner-simple 0-0060: creating new instance [ 16.460086] tuner-simple 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 16.620135] saa6588 0-0010: saa6588 found @ 0x20 (saa7134[0]) [ 16.640046] saa7134[0]: found RDS decoder [ 16.661383] saa7134[0]: registered device video0 [v4l2] [ 16.661483] saa7134[0]: registered device vbi0 [ 16.661582] saa7134[0]: registered device radio0 [ 16.669076] alloc irq_desc for 22 on node 0 [ 16.669080] alloc kstat_irqs on node 0 [ 16.669091] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 16.669256] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 16.670293] saa7134 ALSA driver for DMA sound loaded [ 16.670311] IRQ 18/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 16.670339] saa7134[0]/alsa: saa7134[0] at 0xcfffb800 irq 18 registered as card -2 [ 41.025670] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 41.268473] type=1505 audit(1270048571.227:5): operation="profile_load" pid=820 name="/usr/share/gdm/guest-session/Xsession" [ 41.278934] type=1505 audit(1270048571.237:6): operation="profile_replace" pid=824 name="/sbin/dhclient3" [ 41.279227] type=1505 audit(1270048571.237:7): operation="profile_replace" pid=824 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 41.279388] type=1505 audit(1270048571.237:8): operation="profile_replace" pid=824 name="/usr/lib/connman/scripts/dhclient-script" [ 41.295209] type=1505 audit(1270048571.257:9): operation="profile_load" pid=825 name="/usr/bin/evince" [ 41.298965] type=1505 audit(1270048571.257:10): operation="profile_load" pid=825 name="/usr/bin/evince-previewer" [ 41.364266] type=1505 audit(1270048571.327:11): operation="profile_load" pid=825 name="/usr/bin/evince-thumbnailer" [ 41.383386] type=1505 audit(1270048571.347:12): operation="profile_load" pid=834 name="/usr/lib/cups/backend/cups-pdf" [ 41.383726] type=1505 audit(1270048571.347:13): operation="profile_load" pid=834 name="/usr/sbin/cupsd" [ 41.392048] type=1505 audit(1270048571.357:14): operation="profile_load" pid=835 name="/usr/sbin/tcpdump" [ 41.792721] ppdev: user-space parallel port driver [ 41.844469] [drm] Initialized drm 1.1.0 20060810 [ 41.881554] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 41.892942] [drm] nouveau 0000:01:00.0: Detected an NV20 generation card (0x025300a2) [ 41.893023] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 41.994301] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 41.994499] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 41.994501] [drm] nouveau 0000:01:00.0: BMP version 5.21 [ 41.994504] [drm] nouveau 0000:01:00.0: Bios version 04.25.00.30 [ 41.994508] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.0 [ 41.994511] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02010110 000088b8 [ 41.994515] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02100202 00000000 [ 41.994517] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01000200 000088b8 [ 41.994520] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 01120121 00000032 [ 41.994522] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 01120221 00000032 [ 41.994524] [drm] nouveau 0000:01:00.0: Merging DCB entries 3 and 4 [ 41.994681] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC680 [ 41.994710] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCA81 [ 42.090105] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xC775 [ 42.090137] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD0A1 [ 42.090144] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xC87C [ 42.182155] [TTM] Zone kernel: Available graphics memory: 511992 kiB. [ 42.182231] [drm] nouveau 0000:01:00.0: 128 MiB VRAM [ 42.182301] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 42.182315] agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1 [ 42.182320] agpgart-amd64 0000:00:00.0: bridge is in legacy mode, falling back to 2.x [ 42.182383] agpgart-amd64 0000:00:00.0: putting AGP V2 device into 4x mode [ 42.182457] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 42.182460] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture) [ 42.182931] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 42.183714] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 42.183723] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 42.183777] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 2 [ 42.188791] [drm] nouveau 0000:01:00.0: No TV encoders found. [ 42.188802] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 42.190911] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 42.191994] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 42.191999] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 42.192002] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 42.406581] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x49000, bo ffff880032857c00 [ 42.407406] fb1: nouveaufb frame buffer device [ 42.407409] registered panic notifier [ 42.407417] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 42.500265] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 42.501937] r8169: eth0: link down [ 42.502160] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.855642] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 42.856101] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 42.889745] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 42.900206] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 1 using output B [ 42.900211] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [ 42.900214] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 1 using output B [ 65.450048] wlan0: deauthenticating from 00:a0:c5:d7:91:b4 by local choice (reason=3) [ 65.640014] wlan0: direct probe to AP 00:a0:c5:d7:91:b4 (try 1) [ 65.641092] wlan0: direct probe responded [ 65.641095] wlan0: authenticate with AP 00:a0:c5:d7:91:b4 (try 1) [ 65.643384] wlan0: authenticated [ 65.643402] wlan0: associate with AP 00:a0:c5:d7:91:b4 (try 1) [ 65.652194] wlan0: RX AssocResp from 00:a0:c5:d7:91:b4 (capab=0x471 status=0 aid=1) [ 65.652197] wlan0: associated [ 65.670303] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 76.290021] wlan0: no IPv6 routers present [ 102.510148] Marking TSC unstable due to cpufreq changes [ 102.510230] Switching to clocksource acpi_pm