[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x50d with crng_init=0 [ 0.000000] Linux version 4.13.0-36-generic (buildd@lgw01-amd64-033) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 (Ubuntu 4.13.0-36.40~16.04.1-generic 4.13.13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic root=UUID=4eb09188-05af-4443-8983-623160291183 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfee1000-0x00000000dfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000049fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X58A-UD3R/X58A-UD3R, BIOS F4 02/11/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x4a0000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask E00000000 write-back [ 0.000000] 4 base 300000000 mask F00000000 write-back [ 0.000000] 5 base 400000000 mask F00000000 write-back [ 0.000000] 6 base 4C0000000 mask FC0000000 uncachable [ 0.000000] 7 base 4A0000000 mask FE0000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 18432M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5e00-0x000f5e0f] mapped at [ffff9a65c00f5e00] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff9a65c0099000] 99000 size 24576 [ 0.000000] BRK [0x3f72a000, 0x3f72afff] PGTABLE [ 0.000000] BRK [0x3f72b000, 0x3f72bfff] PGTABLE [ 0.000000] BRK [0x3f72c000, 0x3f72cfff] PGTABLE [ 0.000000] BRK [0x3f72d000, 0x3f72dfff] PGTABLE [ 0.000000] BRK [0x3f72e000, 0x3f72efff] PGTABLE [ 0.000000] BRK [0x3f72f000, 0x3f72ffff] PGTABLE [ 0.000000] BRK [0x3f730000, 0x3f730fff] PGTABLE [ 0.000000] BRK [0x3f731000, 0x3f731fff] PGTABLE [ 0.000000] BRK [0x3f732000, 0x3f732fff] PGTABLE [ 0.000000] BRK [0x3f733000, 0x3f733fff] PGTABLE [ 0.000000] BRK [0x3f734000, 0x3f734fff] PGTABLE [ 0.000000] BRK [0x3f735000, 0x3f735fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x32290000-0x3513ffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F77C0 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000DFEE1040 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000DFEE10C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000DFEE1180 0058B8 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x00000000DFEE0000 000040 [ 0.000000] ACPI: HPET 0x00000000DFEE6C00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000DFEE6C80 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 0x00000000DFEE6CC0 0004D0 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 0x00000000DFEE7190 000C6A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 0x00000000DFEE6A80 00012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000DFEE7E00 002804 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000049fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x49ffca000-0x49fff4fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000049fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfedffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000049fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000049fffffff] [ 0.000000] On node 0 totalpages: 4718206 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14268 pages used for memmap [ 0.000000] DMA32 zone: 913120 pages, LIFO batch:31 [ 0.000000] Normal zone: 59392 pages used for memmap [ 0.000000] Normal zone: 3801088 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfee0000-0xdfee0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfee1000-0xdfeeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfef0000-0xdfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdff00000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xdff00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @ffff9a6a4d200000 s146520 r8192 d29608 u262144 [ 0.000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4644461 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic root=UUID=4eb09188-05af-4443-8983-623160291183 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 18435044K/18872824K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2364K init, 2368K bss, 437780K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 37831 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2833.629 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5667.25 BogoMIPS (lpj=11334516) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.008789] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.008816] Security Framework initialized [ 0.008817] Yama: becoming mindful. [ 0.008837] AppArmor: AppArmor initialized [ 0.014664] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.017659] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.017767] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.017865] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.018072] CPU: Physical Processor ID: 0 [ 0.018073] CPU: Processor Core ID: 0 [ 0.018080] FEATURE SPEC_CTRL Not Present [ 0.018081] mce: CPU supports 9 MCE banks [ 0.018086] CPU0: Thermal monitoring enabled (TM1) [ 0.018094] process: using mwait in idle threads [ 0.018097] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.018097] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.018099] Spectre V2 mitigation: Mitigation: Full generic retpoline [ 0.018099] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported [ 0.018205] Freeing SMP alternatives memory: 36K [ 0.020072] smpboot: Max logical packages: 4 [ 0.020078] DMAR-IR: This system BIOS has enabled interrupt remapping on a chipset that contains an erratum making that feature unstable. To maintain system stability interrupt remapping is being disabled. Please contact your BIOS vendor for an update [ 0.020080] Switched APIC routing to physical flat. [ 0.020465] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064000] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (family: 0x6, model: 0x1a, stepping: 0x5) [ 0.064000] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver. [ 0.064000] core: CPU erratum AAJ80 worked around [ 0.064000] core: CPUID marked event: 'bus cycles' unavailable [ 0.064000] ... version: 3 [ 0.064000] ... bit width: 48 [ 0.064000] ... generic registers: 4 [ 0.064000] ... value mask: 0000ffffffffffff [ 0.064000] ... max period: 000000007fffffff [ 0.064000] ... fixed-purpose events: 3 [ 0.064000] ... event mask: 000000070000000f [ 0.064000] Hierarchical SRCU implementation. [ 0.064000] smp: Bringing up secondary CPUs ... [ 0.064000] x86: Booting SMP configuration: [ 0.064000] .... node #0, CPUs: #1 [ 0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.064000] #2 #3 #4 #5 #6 #7 [ 0.078416] smp: Brought up 1 node, 8 CPUs [ 0.078416] smpboot: Total of 8 processors activated (45338.06 BogoMIPS) [ 0.080669] devtmpfs: initialized [ 0.080669] x86/mm: Memory block size: 128MB [ 0.081433] evm: security.selinux [ 0.081434] evm: security.SMACK64 [ 0.081435] evm: security.SMACK64EXEC [ 0.081435] evm: security.SMACK64TRANSMUTE [ 0.081435] evm: security.SMACK64MMAP [ 0.081436] evm: security.ima [ 0.081436] evm: security.capability [ 0.081453] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee0fff] (4096 bytes) [ 0.081453] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.081453] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.081453] pinctrl core: initialized pinctrl subsystem [ 0.081453] RTC time: 4:54:59, date: 03/07/18 [ 0.081453] NET: Registered protocol family 16 [ 0.081453] cpuidle: using governor ladder [ 0.081453] cpuidle: using governor menu [ 0.081453] PCCT header not found. [ 0.081453] ACPI: bus type PCI registered [ 0.081453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.081453] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.081453] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.081453] PCI: Using configuration type 1 for base access [ 0.084187] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.084187] ACPI: Added _OSI(Module Device) [ 0.084187] ACPI: Added _OSI(Processor Device) [ 0.084187] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.084187] ACPI: Added _OSI(Processor Aggregator Device) [ 0.088002] ACPI: Interpreter enabled [ 0.088002] ACPI: (supports S0 S3 S4 S5) [ 0.088002] ACPI: Using IOAPIC for interrupt routing [ 0.088002] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.088002] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.092010] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.092010] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.092010] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.092010] PCI host bridge to bus 0000:00 [ 0.092010] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.092010] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.092010] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.092010] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.092010] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff window] [ 0.092010] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.092010] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 [ 0.092010] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.092010] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 0.092010] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.092010] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400 [ 0.092010] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.092010] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 0.092010] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.092010] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400 [ 0.092010] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.092010] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 0.092010] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.092010] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400 [ 0.092010] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.092010] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000 [ 0.092010] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000 [ 0.092010] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000 [ 0.092010] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000 [ 0.092010] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020 [ 0.092010] pci 0000:00:13.0: reg 0x10: [mem 0xfbfff000-0xfbffffff] [ 0.092010] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.092010] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 0.092010] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 0.092016] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 0.092123] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020 [ 0.092217] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.092259] pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f] [ 0.092357] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.092399] pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f] [ 0.092496] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.092537] pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f] [ 0.092638] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.092659] pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff] [ 0.092737] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.092806] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.092826] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit] [ 0.096017] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.096098] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.096166] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.096239] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400 [ 0.096311] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.096387] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400 [ 0.096459] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.096531] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 0.096603] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.096678] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.096720] pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f] [ 0.096816] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.096858] pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f] [ 0.096954] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.096995] pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f] [ 0.097096] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.097116] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff] [ 0.097194] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.097259] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.097369] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.097448] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.097452] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.097455] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.097457] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.097542] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a [ 0.097558] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] [ 0.097565] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] [ 0.097571] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] [ 0.097578] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] [ 0.097585] pci 0000:00:1f.2: reg 0x20: [io 0xf900-0xf90f] [ 0.097591] pci 0000:00:1f.2: reg 0x24: [io 0xf800-0xf80f] [ 0.097600] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.097602] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.097603] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.097604] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.097683] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.097700] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit] [ 0.097718] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.097796] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185 [ 0.097812] pci 0000:00:1f.5: reg 0x10: [io 0xf600-0xf607] [ 0.097818] pci 0000:00:1f.5: reg 0x14: [io 0xf500-0xf503] [ 0.097825] pci 0000:00:1f.5: reg 0x18: [io 0xf400-0xf407] [ 0.097832] pci 0000:00:1f.5: reg 0x1c: [io 0xf300-0xf303] [ 0.097839] pci 0000:00:1f.5: reg 0x20: [io 0xf200-0xf20f] [ 0.097845] pci 0000:00:1f.5: reg 0x24: [io 0xf100-0xf10f] [ 0.097972] pci 0000:01:00.0: [1b4b:91a3] type 00 class 0x01018f [ 0.097987] pci 0000:01:00.0: reg 0x10: [io 0xaf00-0xaf07] [ 0.097994] pci 0000:01:00.0: reg 0x14: [io 0xae00-0xae03] [ 0.098000] pci 0000:01:00.0: reg 0x18: [io 0xad00-0xad07] [ 0.098007] pci 0000:01:00.0: reg 0x1c: [io 0xac00-0xac03] [ 0.098013] pci 0000:01:00.0: reg 0x20: [io 0xab00-0xab0f] [ 0.098020] pci 0000:01:00.0: reg 0x24: [mem 0xfb8ff000-0xfb8ff7ff] [ 0.098027] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.098061] pci 0000:01:00.0: PME# supported from D3hot [ 0.108019] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.108023] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.108027] pci 0000:00:01.0: bridge window [mem 0xfb800000-0xfb8fffff] [ 0.108096] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.108120] pci 0000:02:00.0: reg 0x10: [mem 0xfbafe000-0xfbafffff 64bit] [ 0.108203] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.120021] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.120027] pci 0000:00:02.0: bridge window [mem 0xfba00000-0xfbafffff] [ 0.120096] pci 0000:03:00.0: [10de:0615] type 00 class 0x030000 [ 0.120120] pci 0000:03:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff] [ 0.120133] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.120147] pci 0000:03:00.0: reg 0x1c: [mem 0xf6000000-0xf7ffffff 64bit] [ 0.120155] pci 0000:03:00.0: reg 0x24: [io 0xbf00-0xbf7f] [ 0.120164] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.132021] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.132025] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff] [ 0.132029] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 0.132035] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.132082] pci 0000:00:05.0: PCI bridge to [bus 04] [ 0.132125] pci 0000:00:07.0: PCI bridge to [bus 05] [ 0.132161] pci 0000:00:09.0: PCI bridge to [bus 06] [ 0.132203] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.132276] pci 0000:08:00.0: [197b:2363] type 00 class 0x010185 [ 0.132372] pci 0000:08:00.0: reg 0x24: [mem 0xfbefe000-0xfbefffff] [ 0.132441] pci 0000:08:00.0: PME# supported from D3hot [ 0.132501] pci 0000:08:00.1: [197b:2363] type 00 class 0x010185 [ 0.132526] pci 0000:08:00.1: reg 0x10: [io 0xef00-0xef07] [ 0.132535] pci 0000:08:00.1: reg 0x14: [io 0xee00-0xee03] [ 0.132545] pci 0000:08:00.1: reg 0x18: [io 0xed00-0xed07] [ 0.132554] pci 0000:08:00.1: reg 0x1c: [io 0xec00-0xec03] [ 0.132563] pci 0000:08:00.1: reg 0x20: [io 0xeb00-0xeb0f] [ 0.132661] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.132669] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.132672] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.132675] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.132745] pci 0000:09:00.0: [197b:2363] type 00 class 0x010185 [ 0.132840] pci 0000:09:00.0: reg 0x24: [mem 0xfbdfe000-0xfbdfffff] [ 0.132908] pci 0000:09:00.0: PME# supported from D3hot [ 0.132965] pci 0000:09:00.1: [197b:2363] type 00 class 0x010185 [ 0.132990] pci 0000:09:00.1: reg 0x10: [io 0xdf00-0xdf07] [ 0.132999] pci 0000:09:00.1: reg 0x14: [io 0xde00-0xde03] [ 0.133009] pci 0000:09:00.1: reg 0x18: [io 0xdd00-0xdd07] [ 0.133018] pci 0000:09:00.1: reg 0x1c: [io 0xdc00-0xdc03] [ 0.133027] pci 0000:09:00.1: reg 0x20: [io 0xdb00-0xdb0f] [ 0.133124] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.133132] pci 0000:00:1c.3: PCI bridge to [bus 09] [ 0.133135] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.133138] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.133193] pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000 [ 0.133220] pci 0000:0a:00.0: reg 0x10: [io 0xce00-0xceff] [ 0.133246] pci 0000:0a:00.0: reg 0x18: [mem 0xfbbff000-0xfbbfffff 64bit pref] [ 0.133263] pci 0000:0a:00.0: reg 0x20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref] [ 0.133274] pci 0000:0a:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.133353] pci 0000:0a:00.0: supports D1 D2 [ 0.133354] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144025] pci 0000:00:1c.4: PCI bridge to [bus 0a] [ 0.144029] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.144034] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.144040] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 0.144103] pci 0000:0b:06.0: [104c:8024] type 00 class 0x0c0010 [ 0.144122] pci 0000:0b:06.0: reg 0x10: [mem 0xfb9ff000-0xfb9ff7ff] [ 0.144131] pci 0000:0b:06.0: reg 0x14: [mem 0xfb9f8000-0xfb9fbfff] [ 0.144198] pci 0000:0b:06.0: supports D1 D2 [ 0.144199] pci 0000:0b:06.0: PME# supported from D0 D1 D2 D3hot [ 0.144256] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode) [ 0.144261] pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 0.144266] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.144267] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.144268] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.144270] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.144271] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff window] (subtractive decode) [ 0.144687] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.144736] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.144783] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.144830] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.144876] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.144924] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.144971] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.145019] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.145287] SCSI subsystem initialized [ 0.145300] libata version 3.00 loaded. [ 0.145300] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 0.145300] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.145300] pci 0000:03:00.0: vgaarb: bridge control possible [ 0.145300] vgaarb: loaded [ 0.145300] ACPI: bus type USB registered [ 0.145300] usbcore: registered new interface driver usbfs [ 0.145300] usbcore: registered new interface driver hub [ 0.145300] usbcore: registered new device driver usb [ 0.145300] EDAC MC: Ver: 3.0.0 [ 0.145300] PCI: Using ACPI for IRQ routing [ 0.145300] PCI: Discovered peer bus 3f [ 0.145300] PCI: root bus 3f: using default resources [ 0.145300] PCI: Probing PCI hardware (bus 3f) [ 0.145300] ACPI: \: failed to evaluate _DSM (0x1001) [ 0.145300] PCI host bridge to bus 0000:3f [ 0.145300] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.145300] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.145300] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 0.145300] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f]) [ 0.145300] pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000 [ 0.145300] pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000 [ 0.145317] pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000 [ 0.145352] pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000 [ 0.145389] pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000 [ 0.145424] pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000 [ 0.145459] pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000 [ 0.145497] pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000 [ 0.145534] pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000 [ 0.145569] pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000 [ 0.145603] pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000 [ 0.145638] pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000 [ 0.145672] pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000 [ 0.145706] pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000 [ 0.145740] pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000 [ 0.145776] pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000 [ 0.145810] pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000 [ 0.145844] pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000 [ 0.145878] pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000 [ 0.145921] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f [ 0.145923] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f]) [ 0.145928] PCI: pci_cache_line_size set to 64 bytes [ 0.146030] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.146031] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff] [ 0.146106] NetLabel: Initializing [ 0.146106] NetLabel: domain hash size = 128 [ 0.146107] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.146120] NetLabel: unlabeled traffic allowed by default [ 0.146134] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.146134] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.146134] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.149011] clocksource: Switched to clocksource hpet [ 0.158278] VFS: Disk quotas dquot_6.6.0 [ 0.158306] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.158399] AppArmor: AppArmor Filesystem Enabled [ 0.158448] pnp: PnP ACPI init [ 0.158646] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.158648] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.158649] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.158651] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.158652] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.158656] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.158717] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.158859] system 00:02: [io 0x0400-0x04cf] could not be reserved [ 0.158861] system 00:02: [io 0x04d2-0x04ff] has been reserved [ 0.158864] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.159045] system 00:03: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.159047] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.159200] system 00:04: [mem 0x000cd200-0x000cffff] has been reserved [ 0.159201] system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.159203] system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.159204] system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.159206] system 00:04: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 0.159208] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.159209] system 00:04: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.159211] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.159212] system 00:04: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.159214] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.159216] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.159217] system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.159219] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved [ 0.159220] system 00:04: [mem 0x000e0000-0x000effff] has been reserved [ 0.159223] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.159227] pnp: PnP ACPI: found 5 devices [ 0.165363] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.165403] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 0.165405] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000 [ 0.165407] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000 [ 0.165414] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000 [ 0.165421] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000 [ 0.165447] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff] [ 0.165451] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.165454] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref] [ 0.165457] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref] [ 0.165459] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.165462] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb800000-0xfb80ffff pref] [ 0.165464] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.165466] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.165470] pci 0000:00:01.0: bridge window [mem 0xfb800000-0xfb8fffff] [ 0.165475] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.165478] pci 0000:00:02.0: bridge window [mem 0xfba00000-0xfbafffff] [ 0.165484] pci 0000:03:00.0: BAR 6: assigned [mem 0xf9000000-0xf901ffff pref] [ 0.165486] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.165488] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff] [ 0.165491] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 0.165493] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.165497] pci 0000:00:05.0: PCI bridge to [bus 04] [ 0.165505] pci 0000:00:07.0: PCI bridge to [bus 05] [ 0.165512] pci 0000:00:09.0: PCI bridge to [bus 06] [ 0.165520] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.165522] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.165525] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff] [ 0.165528] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.165533] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.165535] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.165538] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.165541] pci 0000:00:1c.1: bridge window [mem 0xf4400000-0xf45fffff 64bit pref] [ 0.165546] pci 0000:00:1c.3: PCI bridge to [bus 09] [ 0.165548] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.165552] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.165554] pci 0000:00:1c.3: bridge window [mem 0xf4600000-0xf47fffff 64bit pref] [ 0.165559] pci 0000:0a:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref] [ 0.165561] pci 0000:00:1c.4: PCI bridge to [bus 0a] [ 0.165563] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.165566] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.165569] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 0.165574] pci 0000:00:1e.0: PCI bridge to [bus 0b] [ 0.165578] pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 0.165585] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.165586] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.165587] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.165589] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.165590] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff window] [ 0.165591] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.165593] pci_bus 0000:01: resource 1 [mem 0xfb800000-0xfb8fffff] [ 0.165594] pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff] [ 0.165595] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.165596] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf9ffffff] [ 0.165598] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.165600] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 0.165601] pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf41fffff] [ 0.165602] pci_bus 0000:07: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.165603] pci_bus 0000:08: resource 0 [io 0xe000-0xefff] [ 0.165605] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.165606] pci_bus 0000:08: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref] [ 0.165607] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.165609] pci_bus 0000:09: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.165610] pci_bus 0000:09: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref] [ 0.165611] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.165612] pci_bus 0000:0a: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.165614] pci_bus 0000:0a: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 0.165615] pci_bus 0000:0b: resource 1 [mem 0xfb900000-0xfb9fffff] [ 0.165617] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7 window] [ 0.165618] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff window] [ 0.165619] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.165620] pci_bus 0000:0b: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.165622] pci_bus 0000:0b: resource 8 [mem 0xdff00000-0xfebfffff window] [ 0.165665] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.165667] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.165697] NET: Registered protocol family 2 [ 0.165917] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.166344] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.166499] TCP: Hash tables configured (established 262144 bind 65536) [ 0.166559] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.166658] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.166789] NET: Registered protocol family 1 [ 0.204365] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.204369] pci 0000:08:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.204373] pci 0000:08:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.204377] pci 0000:09:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.204380] pci 0000:09:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.204412] PCI: CLS 64 bytes, default 64 [ 0.204453] Unpacking initramfs... [ 0.908890] Freeing initrd memory: 47808K [ 0.908957] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.908960] software IO TLB [mem 0xdbee0000-0xdfee0000] (64MB) mapped at [ffff9a669bee0000-ffff9a669fedffff] [ 0.909200] Scanning for low memory corruption every 60 seconds [ 0.909599] audit: initializing netlink subsys (disabled) [ 0.909645] audit: type=2000 audit(1520398499.909:1): state=initialized audit_enabled=0 res=1 [ 0.909923] Initialise system trusted keyrings [ 0.909931] Key type blacklist registered [ 0.909959] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.911060] zbud: loaded [ 0.911517] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.911636] fuse init (API version 7.26) [ 0.912874] Key type asymmetric registered [ 0.912875] Asymmetric key parser 'x509' registered [ 0.912904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.912940] io scheduler noop registered [ 0.912940] io scheduler deadline registered [ 0.912965] io scheduler cfq registered (default) [ 0.913633] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.914300] intel_idle: MWAIT substates: 0x1120 [ 0.914301] intel_idle: v0.4.1 model 0x1A [ 0.914549] intel_idle: lapic_timer_reliable_states 0x2 [ 0.914624] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.914635] ACPI: Power Button [PWRB] [ 0.914670] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.914693] ACPI: Power Button [PWRF] [ 0.915615] GHES: HEST is not enabled! [ 0.915691] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.917476] Linux agpgart interface v0.103 [ 0.920550] loop: module loaded [ 0.920696] ata_piix 0000:00:1f.2: version 2.13 [ 0.920825] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.921874] scsi host0: ata_piix [ 0.922255] scsi host1: ata_piix [ 0.922315] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 0.922320] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 0.922477] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.923298] scsi host2: ata_piix [ 0.923528] scsi host3: ata_piix [ 0.923575] ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19 [ 0.923578] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19 [ 0.923717] libphy: Fixed MDIO Bus: probed [ 0.923719] tun: Universal TUN/TAP device driver, 1.6 [ 0.923794] PPP generic driver version 2.4.2 [ 0.923860] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.923871] ehci-pci: EHCI PCI platform driver [ 0.924120] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.924128] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.924142] ehci-pci 0000:00:1a.7: debug port 1 [ 0.928098] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.928121] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000 [ 0.944309] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.944359] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.944362] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.944364] usb usb1: Product: EHCI Host Controller [ 0.944366] usb usb1: Manufacturer: Linux 4.13.0-36-generic ehci_hcd [ 0.944368] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.944659] hub 1-0:1.0: USB hub found [ 0.944670] hub 1-0:1.0: 6 ports detected [ 0.945010] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.945020] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.945033] ehci-pci 0000:00:1d.7: debug port 1 [ 0.948949] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.948962] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000 [ 0.964178] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.964227] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.964230] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.964232] usb usb2: Product: EHCI Host Controller [ 0.964235] usb usb2: Manufacturer: Linux 4.13.0-36-generic ehci_hcd [ 0.964237] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.964541] hub 2-0:1.0: USB hub found [ 0.964556] hub 2-0:1.0: 6 ports detected [ 0.964740] ehci-platform: EHCI generic platform driver [ 0.964751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.964755] ohci-pci: OHCI PCI platform driver [ 0.964772] ohci-platform: OHCI generic platform driver [ 0.964782] uhci_hcd: USB Universal Host Controller Interface driver [ 0.964927] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.964934] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.964942] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.964970] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.965026] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.965029] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.965031] usb usb3: Product: UHCI Host Controller [ 0.965033] usb usb3: Manufacturer: Linux 4.13.0-36-generic uhci_hcd [ 0.965035] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.965318] hub 3-0:1.0: USB hub found [ 0.965329] hub 3-0:1.0: 2 ports detected [ 0.965581] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.965587] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.965594] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.965621] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.965679] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.965681] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.965684] usb usb4: Product: UHCI Host Controller [ 0.965686] usb usb4: Manufacturer: Linux 4.13.0-36-generic uhci_hcd [ 0.965688] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.965968] hub 4-0:1.0: USB hub found [ 0.965981] hub 4-0:1.0: 2 ports detected [ 0.966220] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.966228] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.966235] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.966255] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 0.966310] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.966312] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.966315] usb usb5: Product: UHCI Host Controller [ 0.966317] usb usb5: Manufacturer: Linux 4.13.0-36-generic uhci_hcd [ 0.966319] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.966595] hub 5-0:1.0: USB hub found [ 0.966606] hub 5-0:1.0: 2 ports detected [ 0.966850] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.966858] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.966865] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.966885] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.966943] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.966946] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.966948] usb usb6: Product: UHCI Host Controller [ 0.966950] usb usb6: Manufacturer: Linux 4.13.0-36-generic uhci_hcd [ 0.966953] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.967238] hub 6-0:1.0: USB hub found [ 0.967249] hub 6-0:1.0: 2 ports detected [ 0.967490] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.967498] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.967505] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.967524] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.967579] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.967582] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.967585] usb usb7: Product: UHCI Host Controller [ 0.967587] usb usb7: Manufacturer: Linux 4.13.0-36-generic uhci_hcd [ 0.967589] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.967755] hub 7-0:1.0: USB hub found [ 0.967763] hub 7-0:1.0: 2 ports detected [ 0.967994] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.968082] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.968089] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.968109] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.968166] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.968168] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.968171] usb usb8: Product: UHCI Host Controller [ 0.968173] usb usb8: Manufacturer: Linux 4.13.0-36-generic uhci_hcd [ 0.968175] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.968376] hub 8-0:1.0: USB hub found [ 0.968384] hub 8-0:1.0: 2 ports detected [ 0.968651] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.968658] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 0.968774] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 0.969020] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.969022] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.969025] usb usb9: Product: xHCI Host Controller [ 0.969027] usb usb9: Manufacturer: Linux 4.13.0-36-generic xhci-hcd [ 0.969029] usb usb9: SerialNumber: 0000:02:00.0 [ 0.969233] hub 9-0:1.0: USB hub found [ 0.969243] hub 9-0:1.0: 2 ports detected [ 0.969351] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.969356] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10 [ 0.972144] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.972168] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.972171] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.972173] usb usb10: Product: xHCI Host Controller [ 0.972175] usb usb10: Manufacturer: Linux 4.13.0-36-generic xhci-hcd [ 0.972177] usb usb10: SerialNumber: 0000:02:00.0 [ 0.972382] hub 10-0:1.0: USB hub found [ 0.972395] hub 10-0:1.0: 2 ports detected [ 0.972554] i8042: PNP: No PS/2 controller found. [ 0.972555] i8042: Probing ports directly. [ 0.973031] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.973038] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.973501] mousedev: PS/2 mouse device common for all mice [ 0.974084] rtc_cmos 00:01: RTC can wake from S4 [ 0.974377] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.974406] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.974416] i2c /dev entries driver [ 0.974478] device-mapper: uevent: version 1.0.3 [ 0.974593] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.975135] ledtrig-cpu: registered to indicate activity on CPUs [ 0.975567] NET: Registered protocol family 10 [ 0.983684] Segment Routing with IPv6 [ 0.983710] NET: Registered protocol family 17 [ 0.983720] Key type dns_resolver registered [ 0.985031] RAS: Correctable Errors collector initialized. [ 0.985067] microcode: sig=0x106a5, pf=0x2, revision=0x11 [ 0.985493] microcode: Microcode Update Driver: v2.2. [ 0.985503] sched_clock: Marking stable (985484710, 0)->(1093826327, -108341617) [ 0.986343] registered taskstats version 1 [ 0.986357] Loading compiled-in X.509 certificates [ 0.991241] Loaded X.509 cert 'Build time autogenerated kernel key: 6392960b5d1a7feefef54e83c93c27dba99187fc' [ 0.991259] zswap: loaded using pool lzo/zbud [ 0.999226] Key type big_key registered [ 0.999232] Key type trusted registered [ 1.003461] Key type encrypted registered [ 1.003465] AppArmor: AppArmor sha1 policy hashing enabled [ 1.003469] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.003493] evm: HMAC attrs: 0x1 [ 1.003932] Magic number: 10:817:918 [ 1.003959] clockevents clockevent11: hash matches [ 1.004199] rtc_cmos 00:01: setting system clock to 2018-03-07 04:55:00 UTC (1520398500) [ 1.005566] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.005566] EDD information not available. [ 1.005587] PM: Hibernation image not present or could not be loaded. [ 1.246968] ata3: SATA link down (SStatus 0 SControl 300) [ 1.257680] ata4: SATA link down (SStatus 0 SControl 300) [ 1.468107] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 1.647161] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b [ 1.647164] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.647166] usb 3-2: Product: USB Receiver [ 1.647168] usb 3-2: Manufacturer: Logitech [ 1.704209] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.704227] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.704237] ata1.01: link offline, clearing class 3 to NONE [ 1.704373] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.704385] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.706842] ata1.00: ATAPI: ATAPI iHAS324 Y, BL1W, max UDMA/100 [ 1.709464] ata2.00: ATAPI: ATAPI iHAS324 Y, BL1W, max UDMA/100 [ 1.709700] ata2.01: ATA-8: ST31000528AS, CC37, max UDMA/133 [ 1.709702] ata2.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.711811] ata1.00: configured for UDMA/100 [ 1.714046] scsi 0:0:0:0: CD-ROM ATAPI iHAS324 Y BL1W PQ: 0 ANSI: 5 [ 1.714526] ata2.00: configured for UDMA/100 [ 1.719637] ata2.01: configured for UDMA/133 [ 1.737899] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.737902] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.738179] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.738278] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.740005] scsi 1:0:0:0: CD-ROM ATAPI iHAS324 Y BL1W PQ: 0 ANSI: 5 [ 1.765970] sr 1:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.766249] sr 1:0:0:0: Attached scsi CD-ROM sr1 [ 1.766347] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.767304] scsi 1:0:1:0: Direct-Access ATA ST31000528AS CC37 PQ: 0 ANSI: 5 [ 1.768120] sd 1:0:1:0: Attached scsi generic sg2 type 0 [ 1.768518] sd 1:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.768624] sd 1:0:1:0: [sda] Write Protect is off [ 1.768628] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.768827] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.795276] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.797498] sd 1:0:1:0: [sda] Attached SCSI disk [ 1.801017] Freeing unused kernel memory: 2364K [ 1.801018] Write protecting the kernel read-only data: 18432k [ 1.802239] Freeing unused kernel memory: 2024K [ 1.803031] Freeing unused kernel memory: 88K [ 1.805347] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.805347] x86/mm: Checking user space page tables [ 1.807348] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.899551] ahci 0000:01:00.0: version 3.0 [ 1.899707] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS [ 1.902079] pata_jmicron 0000:08:00.1: enabling device (0000 -> 0001) [ 1.902665] hidraw: raw HID events driver (C) Jiri Kosina [ 1.903688] scsi host4: pata_jmicron [ 1.904565] scsi host5: pata_jmicron [ 1.904614] ata5: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 18 [ 1.904616] ata6: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 18 [ 1.904644] pata_jmicron 0000:09:00.1: enabling device (0000 -> 0001) [ 1.905316] scsi host6: pata_jmicron [ 1.905402] scsi host7: pata_jmicron [ 1.905435] ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16 [ 1.905437] ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16 [ 1.909889] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl IDE mode [ 1.909893] ahci 0000:01:00.0: flags: 64bit ncq fbs pio [ 1.910159] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.910166] r8169 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.910523] r8169 0000:0a:00.0 eth0: RTL8168d/8111d at 0xffffb96983161000, 6c:f0:49:e2:26:6d, XID 083000c0 IRQ 33 [ 1.910525] r8169 0000:0a:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.910909] scsi host8: ahci [ 1.912046] scsi host9: ahci [ 1.915169] usbcore: registered new interface driver usbhid [ 1.915170] usbhid: USB HID core driver [ 1.916051] scsi host10: ahci [ 1.918105] scsi host11: ahci [ 1.918258] scsi host12: ahci [ 1.919460] scsi host13: ahci [ 1.919591] scsi host14: ahci [ 1.920074] tsc: Refined TSC clocksource calibration: 2833.699 MHz [ 1.920082] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28d89b284be, max_idle_ns: 440795301605 ns [ 1.920124] scsi host15: ahci [ 1.920172] ata9: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff100 irq 32 [ 1.920174] ata10: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff180 irq 32 [ 1.920176] ata11: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff200 irq 32 [ 1.920177] ata12: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff280 irq 32 [ 1.920179] ata13: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff300 irq 32 [ 1.920180] ata14: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff380 irq 32 [ 1.920182] ata15: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff400 irq 32 [ 1.920183] ata16: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff480 irq 32 [ 1.930389] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.930392] ahci 0000:08:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.930703] scsi host16: ahci [ 1.930807] scsi host17: ahci [ 1.930857] ata17: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 17 [ 1.930860] ata18: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 17 [ 1.940693] r8169 0000:0a:00.0 enp10s0: renamed from eth0 [ 1.941119] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.941122] ahci 0000:09:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.941484] scsi host18: ahci [ 1.941612] scsi host19: ahci [ 1.941658] ata19: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 19 [ 1.941661] ata20: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 19 [ 1.953228] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-2/input2 [ 1.968206] firewire_ohci 0000:0b:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 2.086214] input: Logitech M705 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input5 [ 2.086330] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:1a.0-2:1 [ 2.232357] ata10: SATA link down (SStatus 0 SControl 300) [ 2.232378] ata9: SATA link down (SStatus 0 SControl 300) [ 2.232854] ata12: SATA link down (SStatus 0 SControl 300) [ 2.233107] ata15: SATA link down (SStatus 0 SControl 300) [ 2.233199] ata14: SATA link down (SStatus 0 SControl 300) [ 2.233216] ata13: SATA link down (SStatus 0 SControl 300) [ 2.236092] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.236180] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 2.236304] ata16.00: configured for UDMA/66 [ 2.236424] ata11: SATA link down (SStatus 0 SControl 300) [ 2.246457] ata17: SATA link down (SStatus 0 SControl 300) [ 2.248597] ata18: SATA link down (SStatus 0 SControl 300) [ 2.255111] ata20: SATA link down (SStatus 0 SControl 300) [ 2.256692] ata19: SATA link down (SStatus 0 SControl 300) [ 2.408200] scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5 [ 2.408498] scsi 15:0:0:0: Attached scsi generic sg3 type 3 [ 2.492353] firewire_core 0000:0b:06.0: created device fw0: GUID 005fdf10006cf049, S400 [ 2.563402] input: Logitech K520 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input6 [ 2.563818] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:1a.0-2:2 [ 2.940503] clocksource: Switched to clocksource tsc [ 5.084217] floppy0: no floppy controllers found [ 5.084228] work still pending [ 5.313220] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 6.343920] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 6.344149] systemd[1]: Detected architecture x86-64. [ 6.356042] systemd[1]: Set hostname to . [ 6.569540] random: crng init done [ 7.277139] systemd[1]: Listening on Journal Audit Socket. [ 7.277274] systemd[1]: Created slice System Slice. [ 7.277291] systemd[1]: Reached target Remote File Systems (Pre). [ 7.277330] systemd[1]: Listening on Syslog Socket. [ 7.277342] systemd[1]: Reached target Encrypted Volumes. [ 7.277367] systemd[1]: Listening on udev Kernel Socket. [ 7.277377] systemd[1]: Reached target User and Group Name Lookups. [ 8.498248] lp: driver loaded but no devices found [ 8.596290] ppdev: user-space parallel port driver [ 9.212611] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 9.327227] systemd-journald[343]: Received request to flush runtime journal from PID 1 [ 9.808023] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.808477] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT) [ 9.808509] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED) [ 9.808512] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 10.508502] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170531/utaddress-247) [ 10.508510] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.508546] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 11.243839] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 11.243841] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.243843] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 11.243844] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 11.243846] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e [ 11.243847] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 11.243848] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 11.243850] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 11.243851] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 11.243852] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f [ 11.258614] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 11.258662] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 11.258704] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 11.258746] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 11.258789] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 11.258830] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 11.258882] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 11.258926] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 11.701393] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 11.901791] nvidia: loading out-of-tree module taints kernel. [ 11.901797] nvidia: module license 'NVIDIA' taints kernel. [ 11.901798] Disabling lock debugging due to kernel taint [ 11.905967] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 11.912394] nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 11.912741] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:03:00.0 on minor 0 [ 11.912750] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.104 Thu Sep 14 17:13:13 PDT 2017 [ 11.991485] gpio_ich: GPIO from 451 to 511 on gpio_ich [ 12.070484] audit: type=1400 audit(1520398511.566:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=734 comm="apparmor_parser" [ 12.077861] audit: type=1400 audit(1520398511.573:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=732 comm="apparmor_parser" [ 12.079072] audit: type=1400 audit(1520398511.574:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=729 comm="apparmor_parser" [ 12.079077] audit: type=1400 audit(1520398511.574:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=729 comm="apparmor_parser" [ 12.079079] audit: type=1400 audit(1520398511.574:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=729 comm="apparmor_parser" [ 12.079082] audit: type=1400 audit(1520398511.574:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=729 comm="apparmor_parser" [ 12.086186] audit: type=1400 audit(1520398511.582:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=728 comm="apparmor_parser" [ 12.086190] audit: type=1400 audit(1520398511.582:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=728 comm="apparmor_parser" [ 12.214627] audit: type=1400 audit(1520398511.710:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=733 comm="apparmor_parser" [ 12.214633] audit: type=1400 audit(1520398511.710:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=733 comm="apparmor_parser" [ 12.282571] nvidia_uvm: Loaded the UVM driver, major device number 244 [ 13.020238] floppy0: no floppy controllers found [ 14.432910] Adding 17577980k swap on /dev/sda5. Priority:-1 extents:1 across:17577980k FS [ 18.629360] IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready [ 18.733568] r8169 0000:0a:00.0 enp10s0: link down [ 18.733570] r8169 0000:0a:00.0 enp10s0: link down [ 18.733609] IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready [ 21.081046] r8169 0000:0a:00.0 enp10s0: link up [ 21.081053] IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready [ 26.996809] Non-volatile memory driver v1.3 [ 27.934977] ata2.01: failed to enable DIPM, Emask 0x100 [ 27.934997] ata2.00: hard resetting link [ 28.252099] ata2.01: hard resetting link [ 28.728150] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 28.728164] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 28.738216] ata2.00: configured for UDMA/100 [ 28.743205] ata2.01: configured for UDMA/133 [ 29.950963] ata2.01: failed to enable DIPM, Emask 0x100 [ 29.950966] ata2.00: disabling LPM on the link [ 29.950970] ata2.01: limiting SATA link speed to 1.5 Gbps [ 29.950972] ata2.01: limiting speed to UDMA/133:PIO3 [ 33.760051] ata2.00: hard resetting link [ 34.076916] ata2.01: hard resetting link [ 34.552202] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 34.552217] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 34.562343] ata2.00: configured for UDMA/100 [ 34.567454] ata2.01: configured for UDMA/133 [ 34.568189] ata2: EH complete [ 55.409238] show_signal_msg: 5 callbacks suppressed [ 55.409241] mate-panel[2847]: segfault at 101 ip 00007fce99d4eb6c sp 00007fff1ed68540 error 4 in libglib-2.0.so.0.4800.2[7fce99ce7000+10f000] [ 57.117165] logitech-hidpp-device 0003:046D:101B.0004: HID++ 1.0 device connected.