[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x504 with crng_init=0 [ 0.000000] Linux version 4.13.0-31-generic (buildd@lcy01-amd64-013) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #34~16.04.1-Ubuntu SMP Fri Jan 19 17:11:01 UTC 2018 (Ubuntu 4.13.0-31.34~16.04.1-generic 4.13.13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-31-generic root=UUID=698e3325-96b4-4ca0-8453-9dc9bf026e16 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ee81fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ee82000-0x000000007ef97fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ef98000-0x000000007fd76fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fd77000-0x000000007fd7efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007fd7f000-0x000000007fe2cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fe2d000-0x000000007fe30fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007fe31000-0x000000007fea9fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007feaa000-0x000000007fee8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fee9000-0x000000007feedfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007feee000-0x000000007fefefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007feff000-0x000000007fefffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: /D946GZIS, BIOS [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 2047M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G [ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff95dc400fe200] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff95dc40089000] 89000 size 24576 [ 0.000000] BRK [0x2592a000, 0x2592afff] PGTABLE [ 0.000000] BRK [0x2592b000, 0x2592bfff] PGTABLE [ 0.000000] BRK [0x2592c000, 0x2592cfff] PGTABLE [ 0.000000] BRK [0x2592d000, 0x2592dfff] PGTABLE [ 0.000000] BRK [0x2592e000, 0x2592efff] PGTABLE [ 0.000000] BRK [0x2592f000, 0x2592ffff] PGTABLE [ 0.000000] BRK [0x25930000, 0x25930fff] PGTABLE [ 0.000000] BRK [0x25931000, 0x25931fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3223a000-0x35114fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000014 (v00 INTEL ) [ 0.000000] ACPI: RSDT 0x000000007FEFD038 00004C (v01 INTEL D946GZIS 0000004D 01000013) [ 0.000000] ACPI: FACP 0x000000007FEFC000 000074 (v01 INTEL D946GZIS 0000004D MSFT 01000013) [ 0.000000] ACPI: DSDT 0x000000007FEF7000 0044D7 (v01 INTEL D946GZIS 0000004D MSFT 01000013) [ 0.000000] ACPI: FACS 0x000000007FEAA000 000040 [ 0.000000] ACPI: APIC 0x000000007FEF6000 000078 (v01 INTEL D946GZIS 0000004D MSFT 01000013) [ 0.000000] ACPI: WDDT 0x000000007FEF5000 000040 (v01 INTEL D946GZIS 0000004D MSFT 01000013) [ 0.000000] ACPI: MCFG 0x000000007FEF4000 00003C (v01 INTEL D946GZIS 0000004D MSFT 01000013) [ 0.000000] ACPI: ASF! 0x000000007FEF3000 0000A6 (v32 INTEL D946GZIS 0000004D MSFT 01000013) [ 0.000000] ACPI: SSDT 0x000000007FEF2000 0001BC (v01 INTEL CpuPm 0000004D MSFT 01000013) [ 0.000000] ACPI: SSDT 0x000000007FEF1000 000175 (v01 INTEL Cpu0Ist 0000004D MSFT 01000013) [ 0.000000] ACPI: SSDT 0x000000007FEF0000 000175 (v01 INTEL Cpu1Ist 0000004D MSFT 01000013) [ 0.000000] ACPI: SSDT 0x000000007FEEF000 000175 (v01 INTEL Cpu2Ist 0000004D MSFT 01000013) [ 0.000000] ACPI: SSDT 0x000000007FEEE000 000175 (v01 INTEL Cpu3Ist 0000004D MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fefffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7fe7f000-0x7fea9fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007fefffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ee81fff] [ 0.000000] node 0: [mem 0x000000007ef98000-0x000000007fd76fff] [ 0.000000] node 0: [mem 0x000000007fd7f000-0x000000007fe2cfff] [ 0.000000] node 0: [mem 0x000000007fe31000-0x000000007fea9fff] [ 0.000000] node 0: [mem 0x000000007fee9000-0x000000007feedfff] [ 0.000000] node 0: [mem 0x000000007feff000-0x000000007fefffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fefffff] [ 0.000000] On node 0 totalpages: 523548 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3982 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8124 pages used for memmap [ 0.000000] DMA32 zone: 519566 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ee82000-0x7ef97fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7fd77000-0x7fd7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x7fe2d000-0x7fe30fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7feaa000-0x7fee8fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7feee000-0x7fefefff] [ 0.000000] e820: [mem 0x80000000-0xfff7ffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @ffff95dcbfa00000 s146520 r8192 d29608 u524288 [ 0.000000] pcpu-alloc: s146520 r8192 d29608 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515339 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-31-generic root=UUID=698e3325-96b4-4ca0-8453-9dc9bf026e16 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1986552K/2094192K available (12300K kernel code, 2481K rwdata, 4004K rodata, 2364K init, 2368K bss, 107640K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 37823 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1864.737 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3729.47 BogoMIPS (lpj=7458948) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.008444] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.008483] Security Framework initialized [ 0.008485] Yama: becoming mindful. [ 0.008513] AppArmor: AppArmor initialized [ 0.009484] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012150] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.012193] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.012219] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.012594] FEATURE SPEC_CTRL Not Present [ 0.012597] CPU: Physical Processor ID: 0 [ 0.012598] CPU: Processor Core ID: 0 [ 0.012600] mce: CPU supports 6 MCE banks [ 0.012609] CPU0: Thermal monitoring enabled (TM2) [ 0.012613] process: using mwait in idle threads [ 0.012619] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.012620] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.012810] Freeing SMP alternatives memory: 36K [ 0.016104] smpboot: Max logical packages: 2 [ 0.016504] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060000] smpboot: CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (family: 0x6, model: 0xf, stepping: 0x2) [ 0.060000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.060000] core: PEBS disabled due to CPU errata [ 0.060000] ... version: 2 [ 0.060000] ... bit width: 40 [ 0.060000] ... generic registers: 2 [ 0.060000] ... value mask: 000000ffffffffff [ 0.060000] ... max period: 000000007fffffff [ 0.060000] ... fixed-purpose events: 3 [ 0.060000] ... event mask: 0000000700000003 [ 0.060000] Hierarchical SRCU implementation. [ 0.060000] smp: Bringing up secondary CPUs ... [ 0.060000] x86: Booting SMP configuration: [ 0.060000] .... node #0, CPUs: #1 [ 0.060066] smp: Brought up 1 node, 2 CPUs [ 0.060066] smpboot: Total of 2 processors activated (7458.94 BogoMIPS) [ 0.061661] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.061683] devtmpfs: initialized [ 0.061683] x86/mm: Memory block size: 128MB [ 0.061683] evm: security.selinux [ 0.061683] evm: security.SMACK64 [ 0.061683] evm: security.SMACK64EXEC [ 0.061683] evm: security.SMACK64TRANSMUTE [ 0.061683] evm: security.SMACK64MMAP [ 0.061683] evm: security.ima [ 0.061683] evm: security.capability [ 0.061683] PM: Registering ACPI NVS region [mem 0x7ee82000-0x7ef97fff] (1138688 bytes) [ 0.061683] PM: Registering ACPI NVS region [mem 0x7feaa000-0x7fee8fff] (258048 bytes) [ 0.061683] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.061683] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.061683] pinctrl core: initialized pinctrl subsystem [ 0.061683] RTC time: 11:30:39, date: 01/25/18 [ 0.061683] NET: Registered protocol family 16 [ 0.061683] cpuidle: using governor ladder [ 0.061683] cpuidle: using governor menu [ 0.061683] PCCT header not found. [ 0.061683] ACPI: bus type PCI registered [ 0.061683] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.061683] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.061683] PCI: not using MMCONFIG [ 0.061683] PCI: Using configuration type 1 for base access [ 0.065836] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.065836] ACPI: Added _OSI(Module Device) [ 0.065836] ACPI: Added _OSI(Processor Device) [ 0.065836] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.065836] ACPI: Added _OSI(Processor Aggregator Device) [ 0.068591] ACPI: Interpreter enabled [ 0.068612] ACPI: (supports S0 S3 S4 S5) [ 0.068614] ACPI: Using IOAPIC for interrupt routing [ 0.068645] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.068813] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources [ 0.068828] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.069054] ACPI: Enabled 11 GPEs in block 00 to 1F [ 0.076646] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.076653] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.076659] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.076669] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 0.077538] PCI host bridge to bus 0000:00 [ 0.077541] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.077543] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.077545] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.077547] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window] [ 0.077549] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff window] [ 0.077551] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff window] [ 0.077553] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.077564] pci 0000:00:00.0: [8086:2970] type 00 class 0x060000 [ 0.077694] pci 0000:00:01.0: [8086:2971] type 01 class 0x060400 [ 0.077742] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.077868] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.077890] pci 0000:00:1b.0: reg 0x10: [mem 0x93200000-0x93203fff 64bit] [ 0.077962] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.078077] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.078153] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.078267] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.078343] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.078458] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.078534] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.078647] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.078690] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f] [ 0.078816] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.078858] pci 0000:00:1d.1: reg 0x20: [io 0x3060-0x307f] [ 0.078978] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.079021] pci 0000:00:1d.2: reg 0x20: [io 0x3040-0x305f] [ 0.079142] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.079185] pci 0000:00:1d.3: reg 0x20: [io 0x3020-0x303f] [ 0.079314] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.079335] pci 0000:00:1d.7: reg 0x10: [mem 0x93204400-0x932047ff] [ 0.079414] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.079514] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.079664] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.079750] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.079759] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.079764] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.079767] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.079888] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.079908] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.079917] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.079925] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.079934] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.079943] pci 0000:00:1f.1: reg 0x20: [io 0x30b0-0x30bf] [ 0.079962] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.079964] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.079965] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.079967] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.080076] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.080092] pci 0000:00:1f.2: reg 0x10: [io 0x30c8-0x30cf] [ 0.080100] pci 0000:00:1f.2: reg 0x14: [io 0x30e4-0x30e7] [ 0.080108] pci 0000:00:1f.2: reg 0x18: [io 0x30c0-0x30c7] [ 0.080115] pci 0000:00:1f.2: reg 0x1c: [io 0x30e0-0x30e3] [ 0.080123] pci 0000:00:1f.2: reg 0x20: [io 0x30a0-0x30af] [ 0.080131] pci 0000:00:1f.2: reg 0x24: [mem 0x93204000-0x932043ff] [ 0.080162] pci 0000:00:1f.2: PME# supported from D3hot [ 0.080263] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.080317] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.080477] pci 0000:01:00.0: [10de:10c3] type 00 class 0x030000 [ 0.080494] pci 0000:01:00.0: reg 0x10: [mem 0x92000000-0x92ffffff] [ 0.080504] pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.080515] pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref] [ 0.080522] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] [ 0.080530] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.080637] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300 [ 0.080651] pci 0000:01:00.1: reg 0x10: [mem 0x93000000-0x93003fff] [ 0.080795] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.080798] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.080801] pci 0000:00:01.0: bridge window [mem 0x92000000-0x930fffff] [ 0.080805] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref] [ 0.080854] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.080860] pci 0000:00:1c.0: bridge window [mem 0x93300000-0x933fffff] [ 0.080916] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.080921] pci 0000:00:1c.2: bridge window [mem 0x93400000-0x934fffff] [ 0.080980] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.080986] pci 0000:00:1c.3: bridge window [mem 0x93500000-0x935fffff] [ 0.081035] pci 0000:05:00.0: [1033:0035] type 00 class 0x0c0310 [ 0.081055] pci 0000:05:00.0: reg 0x10: [mem 0x93102000-0x93102fff] [ 0.081131] pci 0000:05:00.0: supports D1 D2 [ 0.081133] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot [ 0.081196] pci 0000:05:00.1: [1033:0035] type 00 class 0x0c0310 [ 0.081216] pci 0000:05:00.1: reg 0x10: [mem 0x93101000-0x93101fff] [ 0.081291] pci 0000:05:00.1: supports D1 D2 [ 0.081293] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot [ 0.081356] pci 0000:05:00.2: [1033:00e0] type 00 class 0x0c0320 [ 0.081376] pci 0000:05:00.2: reg 0x10: [mem 0x93103000-0x931030ff] [ 0.081451] pci 0000:05:00.2: supports D1 D2 [ 0.081453] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot [ 0.081528] pci 0000:05:08.0: [8086:1094] type 00 class 0x020000 [ 0.081548] pci 0000:05:08.0: reg 0x10: [mem 0x93100000-0x93100fff] [ 0.081558] pci 0000:05:08.0: reg 0x14: [io 0x1000-0x103f] [ 0.081625] pci 0000:05:08.0: supports D1 D2 [ 0.081627] pci 0000:05:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081707] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.081711] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.081714] pci 0000:00:1e.0: bridge window [mem 0x93100000-0x931fffff] [ 0.081720] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.081722] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.081724] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.081726] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff window] (subtractive decode) [ 0.081728] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff window] (subtractive decode) [ 0.081731] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff window] (subtractive decode) [ 0.081848] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.081932] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) [ 0.082015] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.082097] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.082178] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) [ 0.082260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) [ 0.082342] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) [ 0.082423] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.083423] SCSI subsystem initialized [ 0.083466] libata version 3.00 loaded. [ 0.083466] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.083466] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.083466] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.083466] vgaarb: loaded [ 0.083466] ACPI: bus type USB registered [ 0.083466] usbcore: registered new interface driver usbfs [ 0.083466] usbcore: registered new interface driver hub [ 0.083466] usbcore: registered new device driver usb [ 0.083466] EDAC MC: Ver: 3.0.0 [ 0.083466] PCI: Using ACPI for IRQ routing [ 0.086925] PCI: pci_cache_line_size set to 64 bytes [ 0.086983] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.086985] e820: reserve RAM buffer [mem 0x7ee82000-0x7fffffff] [ 0.086987] e820: reserve RAM buffer [mem 0x7fd77000-0x7fffffff] [ 0.086989] e820: reserve RAM buffer [mem 0x7fe2d000-0x7fffffff] [ 0.086990] e820: reserve RAM buffer [mem 0x7feaa000-0x7fffffff] [ 0.086992] e820: reserve RAM buffer [mem 0x7feee000-0x7fffffff] [ 0.086993] e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff] [ 0.087134] NetLabel: Initializing [ 0.087135] NetLabel: domain hash size = 128 [ 0.087135] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.087160] NetLabel: unlabeled traffic allowed by default [ 0.087187] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.087187] hpet clockevent registered [ 0.087187] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.087187] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.087187] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.089022] clocksource: Switched to clocksource hpet [ 0.108554] VFS: Disk quotas dquot_6.6.0 [ 0.108589] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.108779] AppArmor: AppArmor Filesystem Enabled [ 0.108863] pnp: PnP ACPI init [ 0.109017] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.109020] system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.109023] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved [ 0.109025] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.109027] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.109030] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.109032] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.109034] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.109037] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.109039] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.109045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.109256] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.109337] system 00:02: [io 0x0500-0x053f] has been reserved [ 0.109340] system 00:02: [io 0x0400-0x047f] has been reserved [ 0.109343] system 00:02: [io 0x0680-0x06ff] has been reserved [ 0.109347] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.109700] pnp 00:03: [dma 0 disabled] [ 0.109770] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.109844] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.110055] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.110185] pnp: PnP ACPI: found 6 devices [ 0.117621] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.117628] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.117648] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.117655] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.117663] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.117666] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.117673] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.117676] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.117699] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref] [ 0.117704] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.117709] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref] [ 0.117712] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.117715] pci 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff] [ 0.117718] pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff] [ 0.117723] pci 0000:01:00.0: BAR 6: assigned [mem 0x93080000-0x930fffff pref] [ 0.117726] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.117729] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.117732] pci 0000:00:01.0: bridge window [mem 0x92000000-0x930fffff] [ 0.117736] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref] [ 0.117740] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.117743] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.117747] pci 0000:00:1c.0: bridge window [mem 0x93300000-0x933fffff] [ 0.117751] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff 64bit pref] [ 0.117756] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.117759] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.117763] pci 0000:00:1c.2: bridge window [mem 0x93400000-0x934fffff] [ 0.117767] pci 0000:00:1c.2: bridge window [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.117772] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.117775] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.117779] pci 0000:00:1c.3: bridge window [mem 0x93500000-0x935fffff] [ 0.117783] pci 0000:00:1c.3: bridge window [mem 0xf8400000-0xf85fffff 64bit pref] [ 0.117790] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.117792] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.117797] pci 0000:00:1e.0: bridge window [mem 0x93100000-0x931fffff] [ 0.117805] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.117807] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.117809] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.117811] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window] [ 0.117813] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff window] [ 0.117815] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff window] [ 0.117817] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.117819] pci_bus 0000:01: resource 1 [mem 0x92000000-0x930fffff] [ 0.117821] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref] [ 0.117823] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.117825] pci_bus 0000:02: resource 1 [mem 0x93300000-0x933fffff] [ 0.117827] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf81fffff 64bit pref] [ 0.117829] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.117831] pci_bus 0000:03: resource 1 [mem 0x93400000-0x934fffff] [ 0.117833] pci_bus 0000:03: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.117834] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] [ 0.117836] pci_bus 0000:04: resource 1 [mem 0x93500000-0x935fffff] [ 0.117838] pci_bus 0000:04: resource 2 [mem 0xf8400000-0xf85fffff 64bit pref] [ 0.117840] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff] [ 0.117842] pci_bus 0000:05: resource 1 [mem 0x93100000-0x931fffff] [ 0.117844] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.117846] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.117848] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.117850] pci_bus 0000:05: resource 7 [mem 0x000e0000-0x000effff window] [ 0.117852] pci_bus 0000:05: resource 8 [mem 0xf8000000-0xfeafffff window] [ 0.117853] pci_bus 0000:05: resource 9 [mem 0x80000000-0xefffffff window] [ 0.117953] NET: Registered protocol family 2 [ 0.118206] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.118279] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.118391] TCP: Hash tables configured (established 16384 bind 16384) [ 0.118454] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.118473] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.118537] NET: Registered protocol family 1 [ 0.119964] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.120810] pci 0000:05:08.0: Firmware left e100 interrupts enabled; disabling [ 0.120815] PCI: CLS 64 bytes, default 64 [ 0.120880] Unpacking initramfs... [ 1.236179] Freeing initrd memory: 47980K [ 1.236466] Scanning for low memory corruption every 60 seconds [ 1.236949] audit: initializing netlink subsys (disabled) [ 1.237064] audit: type=2000 audit(1516879840.237:1): state=initialized audit_enabled=0 res=1 [ 1.237525] Initialise system trusted keyrings [ 1.237541] Key type blacklist registered [ 1.237592] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 1.239926] zbud: loaded [ 1.240587] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.240827] fuse init (API version 7.26) [ 1.242831] Key type asymmetric registered [ 1.242833] Asymmetric key parser 'x509' registered [ 1.242889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.242932] io scheduler noop registered [ 1.242933] io scheduler deadline registered [ 1.242980] io scheduler cfq registered (default) [ 1.244205] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 1.244206] vesafb: scrolling: redraw [ 1.244209] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.244224] vesafb: framebuffer at 0x91000000, mapped to 0xffffb135c0800000, using 1216k, total 1216k [ 1.244351] Console: switching to colour frame buffer device 80x30 [ 1.244368] fb0: VESA VGA frame buffer device [ 1.244386] intel_idle: does not run on family 6 model 15 [ 1.244502] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.244540] ACPI: Sleep Button [SLPB] [ 1.244617] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.244642] ACPI: Power Button [PWRF] [ 1.244901] GHES: HEST is not enabled! [ 1.245018] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.265450] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.267472] Linux agpgart interface v0.103 [ 1.269730] loop: module loaded [ 1.269915] ata_piix 0000:00:1f.1: version 2.13 [ 1.270855] scsi host0: ata_piix [ 1.270987] scsi host1: ata_piix [ 1.271044] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14 [ 1.271046] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15 [ 1.271190] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.271212] ata2: port disabled--ignoring [ 1.271692] scsi host2: ata_piix [ 1.271820] scsi host3: ata_piix [ 1.271877] ata3: SATA max UDMA/133 cmd 0x30c8 ctl 0x30e4 bmdma 0x30a0 irq 19 [ 1.271878] ata4: SATA max UDMA/133 cmd 0x30c0 ctl 0x30e0 bmdma 0x30a8 irq 19 [ 1.272037] libphy: Fixed MDIO Bus: probed [ 1.272038] tun: Universal TUN/TAP device driver, 1.6 [ 1.272112] PPP generic driver version 2.4.2 [ 1.272178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.272183] ehci-pci: EHCI PCI platform driver [ 1.272376] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.272385] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.272398] ehci-pci 0000:00:1d.7: debug port 1 [ 1.276314] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.276330] ehci-pci 0000:00:1d.7: irq 23, io mem 0x93204400 [ 1.292057] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.292129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.292131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.292134] usb usb1: Product: EHCI Host Controller [ 1.292136] usb usb1: Manufacturer: Linux 4.13.0-31-generic ehci_hcd [ 1.292138] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.292317] hub 1-0:1.0: USB hub found [ 1.292326] hub 1-0:1.0: 8 ports detected [ 1.292716] ehci-pci 0000:05:00.2: EHCI Host Controller [ 1.292723] ehci-pci 0000:05:00.2: new USB bus registered, assigned bus number 2 [ 1.292759] ehci-pci 0000:05:00.2: irq 23, io mem 0x93103000 [ 1.308080] ehci-pci 0000:05:00.2: USB 2.0 started, EHCI 1.00 [ 1.308132] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.308135] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.308138] usb usb2: Product: EHCI Host Controller [ 1.308140] usb usb2: Manufacturer: Linux 4.13.0-31-generic ehci_hcd [ 1.308142] usb usb2: SerialNumber: 0000:05:00.2 [ 1.308295] hub 2-0:1.0: USB hub found [ 1.308303] hub 2-0:1.0: 5 ports detected [ 1.308505] ehci-platform: EHCI generic platform driver [ 1.308521] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.308524] ohci-pci: OHCI PCI platform driver [ 1.308689] ohci-pci 0000:05:00.0: OHCI PCI host controller [ 1.308699] ohci-pci 0000:05:00.0: new USB bus registered, assigned bus number 3 [ 1.308727] ohci-pci 0000:05:00.0: irq 21, io mem 0x93102000 [ 1.397970] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.397972] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.397974] usb usb3: Product: OHCI PCI host controller [ 1.397976] usb usb3: Manufacturer: Linux 4.13.0-31-generic ohci_hcd [ 1.397978] usb usb3: SerialNumber: 0000:05:00.0 [ 1.398115] hub 3-0:1.0: USB hub found [ 1.398125] hub 3-0:1.0: 3 ports detected [ 1.398413] ohci-pci 0000:05:00.1: OHCI PCI host controller [ 1.398419] ohci-pci 0000:05:00.1: new USB bus registered, assigned bus number 4 [ 1.398445] ohci-pci 0000:05:00.1: irq 22, io mem 0x93101000 [ 1.451138] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H44N, RB00, max UDMA/66 [ 1.472205] ata1.00: configured for UDMA/66 [ 1.478076] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H44N RB00 PQ: 0 ANSI: 5 [ 1.485869] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.485871] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.485873] usb usb4: Product: OHCI PCI host controller [ 1.485875] usb usb4: Manufacturer: Linux 4.13.0-31-generic ohci_hcd [ 1.485877] usb usb4: SerialNumber: 0000:05:00.1 [ 1.486021] hub 4-0:1.0: USB hub found [ 1.486038] hub 4-0:1.0: 2 ports detected [ 1.486165] ohci-platform: OHCI generic platform driver [ 1.486178] uhci_hcd: USB Universal Host Controller Interface driver [ 1.486329] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.486336] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.486343] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.486362] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 [ 1.486417] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.486419] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.486421] usb usb5: Product: UHCI Host Controller [ 1.486423] usb usb5: Manufacturer: Linux 4.13.0-31-generic uhci_hcd [ 1.486425] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.486557] hub 5-0:1.0: USB hub found [ 1.486565] hub 5-0:1.0: 2 ports detected [ 1.486806] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.486812] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.486819] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.486837] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 [ 1.486893] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.486895] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.486897] usb usb6: Product: UHCI Host Controller [ 1.486899] usb usb6: Manufacturer: Linux 4.13.0-31-generic uhci_hcd [ 1.486901] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.487026] hub 6-0:1.0: USB hub found [ 1.487034] hub 6-0:1.0: 2 ports detected [ 1.487276] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.487286] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.487292] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.487318] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 [ 1.487371] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.487374] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.487376] usb usb7: Product: UHCI Host Controller [ 1.487378] usb usb7: Manufacturer: Linux 4.13.0-31-generic uhci_hcd [ 1.487380] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.487506] hub 7-0:1.0: USB hub found [ 1.487514] hub 7-0:1.0: 2 ports detected [ 1.487746] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.487752] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 1.487759] uhci_hcd 0000:00:1d.3: detected 2 ports [ 1.487783] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020 [ 1.487836] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.487839] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.487841] usb usb8: Product: UHCI Host Controller [ 1.487843] usb usb8: Manufacturer: Linux 4.13.0-31-generic uhci_hcd [ 1.487845] usb usb8: SerialNumber: 0000:00:1d.3 [ 1.487968] hub 8-0:1.0: USB hub found [ 1.487976] hub 8-0:1.0: 2 ports detected [ 1.488172] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.488173] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.489045] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.489198] mousedev: PS/2 mouse device common for all mice [ 1.489389] rtc_cmos 00:01: RTC can wake from S4 [ 1.489512] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.489536] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.489544] i2c /dev entries driver [ 1.489622] device-mapper: uevent: version 1.0.3 [ 1.489744] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.489904] ledtrig-cpu: registered to indicate activity on CPUs [ 1.490405] NET: Registered protocol family 10 [ 1.497128] Segment Routing with IPv6 [ 1.497158] NET: Registered protocol family 17 [ 1.497171] Key type dns_resolver registered [ 1.497422] RAS: Correctable Errors collector initialized. [ 1.497472] microcode: sig=0x6f2, pf=0x1, revision=0x56 [ 1.497529] microcode: Microcode Update Driver: v2.2. [ 1.497553] sched_clock: Marking stable (1497522677, 0)->(1602901018, -105378341) [ 1.497805] registered taskstats version 1 [ 1.497819] Loading compiled-in X.509 certificates [ 1.502282] Loaded X.509 cert 'Build time autogenerated kernel key: 61eb76328e0157b319817d11297b1aa90d9bd673' [ 1.502314] zswap: loaded using pool lzo/zbud [ 1.505360] ata4.01: ATA-7: ST3160211AS, 3.AAE, max UDMA/133 [ 1.505362] ata4.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.507721] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.507723] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.507901] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.507973] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.508638] Key type big_key registered [ 1.508643] Key type trusted registered [ 1.511626] Key type encrypted registered [ 1.511630] AppArmor: AppArmor sha1 policy hashing enabled [ 1.511634] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.511666] evm: HMAC attrs: 0x1 [ 1.511953] Magic number: 2:491:530 [ 1.512023] tty ttyS10: hash matches [ 1.512132] rtc_cmos 00:01: setting system clock to 2018-01-25 11:30:40 UTC (1516879840) [ 1.512455] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.512456] EDD information not available. [ 1.512515] PM: Hibernation image not present or could not be loaded. [ 1.512634] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.580314] ata4.01: configured for UDMA/133 [ 1.580510] scsi 3:0:1:0: Direct-Access ATA ST3160211AS E PQ: 0 ANSI: 5 [ 1.580807] sd 3:0:1:0: Attached scsi generic sg1 type 0 [ 1.580808] sd 3:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.580826] sd 3:0:1:0: [sda] Write Protect is off [ 1.580828] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.580857] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.620044] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.641730] sda: sda1 sda2 sda3 sda4 [ 1.642304] sd 3:0:1:0: [sda] Attached SCSI disk [ 1.646436] Freeing unused kernel memory: 2364K [ 1.646440] Write protecting the kernel read-only data: 18432k [ 1.647745] Freeing unused kernel memory: 2024K [ 1.648187] Freeing unused kernel memory: 92K [ 1.651600] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.651601] x86/mm: Checking user space page tables [ 1.654835] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.752045] usb 1-1: device descriptor read/64, error -71 [ 1.822496] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.822498] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.876836] e100 0000:05:08.0 eth0: addr 0x93100000, irq 20, MAC addr 00:19:d1:5a:63:e3 [ 1.878123] e100 0000:05:08.0 enp5s8: renamed from eth0 [ 1.893019] usb 4-1: new low-speed USB device number 2 using ohci-pci [ 1.902314] checking generic (91000000 130000) vs hw (80000000 10000000) [ 1.902317] checking generic (91000000 130000) vs hw (90000000 2000000) [ 1.902318] fb: switching to nouveaufb from VESA VGA [ 1.902355] Console: switching to colour dummy device 80x25 [ 1.902619] nouveau 0000:01:00.0: NVIDIA GT218 (0a8180b1) [ 2.017158] nouveau 0000:01:00.0: bios: version 70.18.6f.00.05 [ 2.018822] nouveau 0000:01:00.0: fb: 512 MiB DDR3 [ 2.018827] nouveau 0000:01:00.0: fb: memory controller reports 512 MiB VRAM [ 2.194058] usb 4-1: New USB device found, idVendor=04b3, idProduct=310c [ 2.194061] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.194063] usb 4-1: Product: USB Optical Mouse [ 2.204047] hidraw: raw HID events driver (C) Jiri Kosina [ 2.212654] usbcore: registered new interface driver usbhid [ 2.212656] usbhid: USB HID core driver [ 2.215030] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:00.1/usb4/4-1/4-1:1.0/0003:04B3:310C.0001/input/input3 [ 2.215620] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:05:00.1-1/input0 [ 2.240040] tsc: Refined TSC clocksource calibration: 1864.803 MHz [ 2.240047] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35c295be778, max_idle_ns: 881590674048 ns [ 2.288124] usb 1-1: device descriptor read/64, error -71 [ 2.528054] usb 1-1: new high-speed USB device number 3 using ehci-pci [ 2.684049] usb 1-1: device descriptor read/64, error -71 [ 2.956048] usb 1-1: device descriptor read/64, error -71 [ 3.184044] usb 1-1: new high-speed USB device number 4 using ehci-pci [ 3.280061] clocksource: Switched to clocksource tsc [ 3.316100] [TTM] Zone kernel: Available graphics memory: 1019524 kiB [ 3.316101] [TTM] Initializing pool allocator [ 3.316107] [TTM] Initializing DMA pool allocator [ 3.316132] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB [ 3.316134] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 3.316139] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 3.316141] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 3.316145] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030 [ 3.316147] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000 [ 3.316149] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010 [ 3.316151] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000 [ 3.316154] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 3.316156] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 3.316158] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 [ 3.322295] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.322296] [drm] Driver supports precise vblank timestamp query. [ 3.338083] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 3.415434] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x70000, bo ffff95dc744a2800 [ 3.416321] fbcon: nouveaufb (fb0) is primary device [ 3.416728] Console: switching to colour frame buffer device 240x67 [ 3.416793] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 3.488057] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 3.600041] usb 1-1: device not accepting address 4, error -71 [ 3.720125] usb 1-1: new high-speed USB device number 5 using ehci-pci [ 4.144166] usb 1-1: device not accepting address 5, error -71 [ 4.144183] usb usb1-port1: unable to enumerate USB device [ 4.832383] floppy0: no floppy controllers found [ 7.728352] usb usb1-port4: Cannot enable. Maybe the USB cable is bad? [ 9.512097] usb usb1-port4: Cannot enable. Maybe the USB cable is bad? [ 11.296073] usb usb1-port4: Cannot enable. Maybe the USB cable is bad? [ 12.100062] usb 1-4: new high-speed USB device number 11 using ehci-pci [ 12.524103] usb 1-4: device not accepting address 11, error -71 [ 12.524117] usb usb1-port4: unable to enumerate USB device [ 13.760063] usb 1-5: new high-speed USB device number 12 using ehci-pci [ 14.576052] usb 1-5: device descriptor read/64, error -71 [ 14.965886] ehci-pci 0000:00:1d.7: port 5 reset error -110 [ 16.748063] usb 1-6: new high-speed USB device number 13 using ehci-pci [ 17.504053] usb 1-6: device descriptor read/64, error -71 [ 17.744052] usb 1-6: device descriptor read/64, error -71 [ 17.972063] usb 1-6: new high-speed USB device number 14 using ehci-pci [ 18.372083] usb 1-6: device descriptor read/64, error -71 [ 18.612052] usb 1-6: device descriptor read/64, error -71 [ 18.840084] usb 1-6: new high-speed USB device number 15 using ehci-pci [ 19.264105] usb 1-6: device not accepting address 15, error -71 [ 19.384053] usb 1-6: new high-speed USB device number 16 using ehci-pci [ 19.808144] usb 1-6: device not accepting address 16, error -71 [ 19.808157] usb usb1-port6: unable to enumerate USB device [ 20.212064] usb 1-7: new high-speed USB device number 17 using ehci-pci [ 22.008079] usb usb1-port7: Cannot enable. Maybe the USB cable is bad? [ 22.812085] usb 1-7: new high-speed USB device number 18 using ehci-pci [ 23.093895] ehci-pci 0000:00:1d.7: port 7 reset error -110 [ 24.180085] usb 8-1: new full-speed USB device number 2 using uhci_hcd [ 24.520063] usb 8-1: device descriptor read/64, error -71 [ 24.760083] usb 8-1: device descriptor read/64, error -71 [ 24.876074] usb 1-8: new high-speed USB device number 19 using ehci-pci [ 24.988061] usb 8-1: new full-speed USB device number 3 using uhci_hcd [ 25.116062] usb 8-1: device descriptor read/64, error -71 [ 25.158169] ehci-pci 0000:00:1d.7: port 8 reset error -110 [ 25.352104] usb 8-1: device descriptor read/64, error -71 [ 25.580085] usb 8-1: new full-speed USB device number 4 using uhci_hcd [ 26.004084] usb 8-1: device not accepting address 4, error -71 [ 26.124063] usb 8-1: new full-speed USB device number 5 using uhci_hcd [ 26.544065] usb 8-1: device not accepting address 5, error -71 [ 26.544078] usb usb8-port1: unable to enumerate USB device [ 28.313432] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 29.500246] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 29.500441] systemd[1]: Detected architecture x86-64. [ 29.507862] systemd[1]: Set hostname to . [ 29.675075] random: crng init done [ 31.613225] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 31.613473] systemd[1]: Created slice User and Session Slice. [ 31.613491] systemd[1]: Reached target Remote File Systems (Pre). [ 31.613506] systemd[1]: Reached target Remote File Systems. [ 31.613575] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 31.613647] systemd[1]: Listening on udev Control Socket. [ 31.613725] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 32.791548] lp: driver loaded but no devices found [ 32.821362] ppdev: user-space parallel port driver [ 32.867547] parport_pc 00:03: reported by Plug and Play ACPI [ 32.867664] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 32.968235] lp0: using parport0 (interrupt-driven). [ 40.331623] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 40.361284] systemd-journald[219]: Received request to flush runtime journal from PID 1 [ 40.588616] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 40.656401] intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. [ 40.718619] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x0000000000000429 (\GPE0) (20170531/utaddress-247) [ 40.718629] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 40.718669] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 40.720858] leds_ss4200: no LED devices found [ 40.923870] snd_hda_intel 0000:01:00.1: Disabling MSI [ 40.923881] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 40.943153] snd_hda_codec_idt hdaudioC0D2: autoconfig for STAC9227: line_outs=3 (0xd/0xf/0xe/0x0/0x0) type:speaker [ 40.943156] snd_hda_codec_idt hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 40.943159] snd_hda_codec_idt hdaudioC0D2: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) [ 40.943161] snd_hda_codec_idt hdaudioC0D2: mono: mono_out=0x0 [ 40.943162] snd_hda_codec_idt hdaudioC0D2: inputs: [ 40.943165] snd_hda_codec_idt hdaudioC0D2: Mic=0xb [ 40.973761] kvm: disabled by bios [ 40.986404] coretemp coretemp.0: Using relative temperature scale! [ 40.986680] coretemp coretemp.0: Using relative temperature scale! [ 40.993770] intel_powerclamp: No package C-state available [ 41.349306] gpio_ich: GPIO from 462 to 511 on gpio_ich [ 41.384808] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 41.384899] input: HDA Intel Speaker Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 41.384986] input: HDA Intel Speaker Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 41.385076] input: HDA Intel Speaker CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 41.385160] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 43.316886] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9 [ 43.316985] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 43.317084] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 43.317175] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 43.744097] floppy0: no floppy controllers found [ 44.348555] Adding 976892k swap on /dev/sda2. Priority:-1 extents:1 across:976892k FS [ 44.438739] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 44.911474] audit: type=1400 audit(1516879883.899:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=691 comm="apparmor_parser" [ 44.911479] audit: type=1400 audit(1516879883.899:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=691 comm="apparmor_parser" [ 44.911482] audit: type=1400 audit(1516879883.899:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=691 comm="apparmor_parser" [ 44.911485] audit: type=1400 audit(1516879883.899:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=691 comm="apparmor_parser" [ 44.912329] audit: type=1400 audit(1516879883.900:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=690 comm="apparmor_parser" [ 44.912333] audit: type=1400 audit(1516879883.900:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=690 comm="apparmor_parser" [ 44.931743] audit: type=1400 audit(1516879883.919:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=692 comm="apparmor_parser" [ 44.931748] audit: type=1400 audit(1516879883.919:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=692 comm="apparmor_parser" [ 44.931752] audit: type=1400 audit(1516879883.919:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=692 comm="apparmor_parser" [ 44.931755] audit: type=1400 audit(1516879883.919:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=692 comm="apparmor_parser" [ 48.951746] IPv6: ADDRCONF(NETDEV_UP): enp5s8: link is not ready [ 48.973055] IPv6: ADDRCONF(NETDEV_UP): enp5s8: link is not ready [ 48.976210] e100 0000:05:08.0 enp5s8: NIC Link is Up 100 Mbps Full Duplex [ 48.976286] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s8: link becomes ready [ 54.797604] vboxdrv: loading out-of-tree module taints kernel. [ 54.797944] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 54.801834] vboxdrv: Found 2 processor cores [ 54.803285] vboxdrv: fAsync=0 offMin=0x3f7 offMax=0x4359 [ 54.903458] vboxdrv: TSC mode is Synchronous, tentative frequency 1864803139 Hz [ 54.903459] vboxdrv: Successfully loaded version 5.0.40_Ubuntu (interface 0x00240000) [ 54.912006] VBoxNetFlt: Successfully started. [ 54.922572] VBoxNetAdp: Successfully started. [ 54.935686] VBoxPciLinuxInit [ 54.941873] vboxpci: IOMMU not found (not registered) [ 135.131672] usb 2-5: new high-speed USB device number 3 using ehci-pci [ 135.280729] usb 2-5: New USB device found, idVendor=0781, idProduct=5567 [ 135.280732] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 135.280735] usb 2-5: Product: Cruzer Blade [ 135.280738] usb 2-5: Manufacturer: SanDisk [ 135.280740] usb 2-5: SerialNumber: 4C532000020830109451 [ 135.370420] usb-storage 2-5:1.0: USB Mass Storage device detected [ 135.370573] scsi host4: usb-storage 2-5:1.0 [ 135.370684] usbcore: registered new interface driver usb-storage [ 135.384943] usbcore: registered new interface driver uas [ 136.384929] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Blade 2.01 PQ: 0 ANSI: 6 [ 136.385389] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 136.386667] sd 4:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 136.390058] sd 4:0:0:0: [sdb] Write Protect is off [ 136.390062] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 136.391702] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 136.405313] sdb: sdb1 [ 136.408543] sd 4:0:0:0: [sdb] Attached SCSI disk [ 224.769797] usb 2-4: new high-speed USB device number 4 using ehci-pci [ 224.920220] usb 2-4: New USB device found, idVendor=0781, idProduct=5567 [ 224.920224] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 224.920226] usb 2-4: Product: USB DISK [ 224.920229] usb 2-4: Manufacturer: Sandisk Corporation [ 224.920231] usb 2-4: SerialNumber: VC0482150519011128000117 [ 224.920661] usb-storage 2-4:1.0: USB Mass Storage device detected [ 224.923079] scsi host5: usb-storage 2-4:1.0 [ 226.285020] scsi 5:0:0:0: Direct-Access Sandisk USB Ultra 1100 PQ: 0 ANSI: 4 [ 226.285426] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 226.287255] sd 5:0:0:0: [sdc] 15730688 512-byte logical blocks: (8.05 GB/7.50 GiB) [ 226.289097] sd 5:0:0:0: [sdc] Write Protect is off [ 226.289101] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 226.290027] sd 5:0:0:0: [sdc] No Caching mode page found [ 226.290033] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 226.297280] sdc: sdc1 [ 226.300650] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 323.911109] usb 2-4: USB disconnect, device number 4 [ 327.343724] usb 2-4: new high-speed USB device number 5 using ehci-pci [ 327.494541] usb 2-4: New USB device found, idVendor=0781, idProduct=5567 [ 327.494544] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 327.494547] usb 2-4: Product: USB DISK [ 327.494549] usb 2-4: Manufacturer: Sandisk Corporation [ 327.494552] usb 2-4: SerialNumber: VC0482150519011128000117 [ 327.494972] usb-storage 2-4:1.0: USB Mass Storage device detected [ 327.495112] scsi host5: usb-storage 2-4:1.0 [ 328.842221] scsi 5:0:0:0: Direct-Access Sandisk USB Ultra 1100 PQ: 0 ANSI: 4 [ 328.842858] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 328.844225] sd 5:0:0:0: [sdc] 15730688 512-byte logical blocks: (8.05 GB/7.50 GiB) [ 328.845073] sd 5:0:0:0: [sdc] Write Protect is off [ 328.845076] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 328.846727] sd 5:0:0:0: [sdc] No Caching mode page found [ 328.846735] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 328.853986] sdc: sdc1 [ 328.857102] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 710.182740] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 718.037438] usb 2-4: USB disconnect, device number 5 [ 825.698055] EXT4-fs error (device sda1): ext4_mb_generate_buddy:756: group 246, block bitmap and bg descriptor inconsistent: 7010 vs 6623 free clusters [ 825.698102] JBD2: Spotted dirty metadata buffer (dev = sda1, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [ 825.700397] EXT4-fs error (device sda1): ext4_mb_generate_buddy:756: group 247, block bitmap and bg descriptor inconsistent: 5870 vs 4930 free clusters [ 825.700417] JBD2: Spotted dirty metadata buffer (dev = sda1, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [ 873.607957] perf: interrupt took too long (3177 > 3141), lowering kernel.perf_event_max_sample_rate to 62750 [ 999.214885] perf: interrupt took too long (3976 > 3971), lowering kernel.perf_event_max_sample_rate to 50250 [ 1219.906396] perf: interrupt took too long (4971 > 4970), lowering kernel.perf_event_max_sample_rate to 40000 [ 6472.242444] usb 2-4: new high-speed USB device number 6 using ehci-pci [ 6472.393325] usb 2-4: New USB device found, idVendor=0781, idProduct=5567 [ 6472.393328] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6472.393331] usb 2-4: Product: USB DISK [ 6472.393333] usb 2-4: Manufacturer: Sandisk Corporation [ 6472.393335] usb 2-4: SerialNumber: VC0482150519011128000117 [ 6472.393755] usb-storage 2-4:1.0: USB Mass Storage device detected [ 6472.395997] scsi host5: usb-storage 2-4:1.0 [ 6473.900764] scsi 5:0:0:0: Direct-Access Sandisk USB Ultra 1100 PQ: 0 ANSI: 4 [ 6473.904175] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 6473.904975] sd 5:0:0:0: [sdc] 15730688 512-byte logical blocks: (8.05 GB/7.50 GiB) [ 6473.905864] sd 5:0:0:0: [sdc] Write Protect is off [ 6473.905868] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 6473.907535] sd 5:0:0:0: [sdc] No Caching mode page found [ 6473.907541] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 6473.912757] sdc: sdc1 [ 6473.915606] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 6475.559241] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8249.576263] usb 2-4: USB disconnect, device number 6 [ 9632.251178] perf: interrupt took too long (6237 > 6213), lowering kernel.perf_event_max_sample_rate to 32000