[21357.818277] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [21357.856272] PM: noirq suspend of devices complete after 40.072 msecs [21357.857050] ACPI: Preparing to enter system sleep state S3 [21358.184235] ACPI : EC: EC stopped [21358.184237] PM: Saving platform NVS memory [21358.184245] Disabling non-boot CPUs ... [21358.184941] Broke affinity for irq 279 [21358.186885] smpboot: CPU 1 is now offline [21358.201479] Broke affinity for irq 123 [21358.201485] Broke affinity for irq 124 [21358.201535] Broke affinity for irq 279 [21358.201540] Broke affinity for irq 281 [21358.202672] smpboot: CPU 2 is now offline [21358.229117] Broke affinity for irq 1 [21358.229124] Broke affinity for irq 8 [21358.229128] Broke affinity for irq 9 [21358.229132] Broke affinity for irq 12 [21358.229136] Broke affinity for irq 14 [21358.229140] Broke affinity for irq 16 [21358.229144] Broke affinity for irq 17 [21358.229155] Broke affinity for irq 122 [21358.229158] Broke affinity for irq 123 [21358.229162] Broke affinity for irq 124 [21358.229196] Broke affinity for irq 277 [21358.229201] Broke affinity for irq 279 [21358.229205] Broke affinity for irq 281 [21358.230310] smpboot: CPU 3 is now offline [21358.240386] ACPI: Low-level resume complete [21358.240386] ACPI : EC: EC started [21358.240386] PM: Restoring platform NVS memory [21358.240386] Enabling non-boot CPUs ... [21358.264247] x86: Booting SMP configuration: [21358.264248] smpboot: Booting Node 0 Processor 1 APIC 0x2 [21358.265935] cache: parent cpu1 should not be sleeping [21358.266099] CPU1 is up [21358.292397] smpboot: Booting Node 0 Processor 2 APIC 0x1 [21358.293675] cache: parent cpu2 should not be sleeping [21358.294095] CPU2 is up [21358.320476] smpboot: Booting Node 0 Processor 3 APIC 0x3 [21358.321708] cache: parent cpu3 should not be sleeping [21358.322191] CPU3 is up [21358.330462] ACPI: Waking up from system sleep state S3 [21358.516690] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [21358.516837] PM: noirq resume of devices complete after 38.978 msecs [21358.530943] PM: early resume of devices complete after 13.985 msecs [21358.531414] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [21358.531937] sd 1:0:0:0: [sda] Starting disk [21358.535821] rtc_cmos 00:03: System wakeup disabled by ACPI [21358.538071] [drm] GuC firmware load skipped [21358.580067] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [21358.580067] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [21358.844277] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [21358.844880] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21358.844884] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21358.844887] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [21358.845261] ata2.00: supports DRM functions and may not be fully accessible [21358.847983] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21358.847988] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21358.847991] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [21358.848390] ata2.00: supports DRM functions and may not be fully accessible [21358.849735] ata2.00: configured for UDMA/133 [21358.852723] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [21359.112896] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [21359.372989] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [21359.804697] [drm] RC6 on [21360.561412] PM: resume of devices complete after 2030.458 msecs [21360.561702] usb 1-7:1.0: rebind failed: -517 [21360.561706] usb 1-7:1.1: rebind failed: -517 [21360.562118] PM: Finishing wakeup. [21360.562121] Restarting tasks ... [21360.580329] Bluetooth: hci0: read Intel version: 370810011003110e00 [21360.593823] done. [21360.593864] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [21360.912311] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [21362.668351] e1000e: enp0s31f6 NIC Link is Down [21362.669677] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [21362.671979] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [21362.672253] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [21362.738923] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [21362.739125] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [21362.760160] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [21362.762928] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [21362.952394] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [21363.038346] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [21367.589109] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [21367.601309] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [21367.603493] wlp3s0: authenticated [21367.608119] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [21367.612049] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=5) [21367.618642] wlp3s0: associated [21367.618820] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [21369.109013] systemd[1]: snapd.refresh.timer: Adding 1h 16min 21.290399s random time. [21369.304992] systemd[1]: snapd.refresh.timer: Adding 5h 11min 46.469813s random time. [22149.240164] usb 1-2.1: new high-speed USB device number 30 using xhci_hcd [22149.344291] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [22149.344298] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22149.344303] usb 1-2.1: Product: DT101 II [22149.344307] usb 1-2.1: Manufacturer: Kingston [22149.344311] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [22149.345594] usb-storage 1-2.1:1.0: USB Mass Storage device detected [22149.346183] scsi host2: usb-storage 1-2.1:1.0 [22150.365115] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [22150.366069] sd 2:0:0:0: Attached scsi generic sg1 type 0 [22150.366324] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [22150.366527] sd 2:0:0:0: [sdb] Write Protect is off [22150.366531] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [22150.366711] sd 2:0:0:0: [sdb] No Caching mode page found [22150.366718] sd 2:0:0:0: [sdb] Assuming drive cache: write through [22150.368779] sdb: sdb4 [22150.369987] sd 2:0:0:0: [sdb] Attached SCSI removable disk [22150.762943] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [22169.023174] usb 1-2.1: USB disconnect, device number 30 [22791.064098] usb 1-2.1: new high-speed USB device number 31 using xhci_hcd [22791.168803] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [22791.168811] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [22791.168815] usb 1-2.1: Product: DT101 II [22791.168819] usb 1-2.1: Manufacturer: Kingston [22791.168823] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [22791.170505] usb-storage 1-2.1:1.0: USB Mass Storage device detected [22791.172599] scsi host2: usb-storage 1-2.1:1.0 [22792.189131] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [22792.190078] sd 2:0:0:0: Attached scsi generic sg1 type 0 [22792.192115] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [22792.192388] sd 2:0:0:0: [sdb] Write Protect is off [22792.192395] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [22792.192573] sd 2:0:0:0: [sdb] No Caching mode page found [22792.192581] sd 2:0:0:0: [sdb] Assuming drive cache: write through [22792.197699] sdb: sdb4 [22792.199029] sd 2:0:0:0: [sdb] Attached SCSI removable disk [22792.588685] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [22813.627464] usb 1-2.1: USB disconnect, device number 31 [23382.792114] usb 1-2.1: new high-speed USB device number 32 using xhci_hcd [23382.896043] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [23382.896051] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23382.896056] usb 1-2.1: Product: DT101 II [23382.896060] usb 1-2.1: Manufacturer: Kingston [23382.896064] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [23382.897375] usb-storage 1-2.1:1.0: USB Mass Storage device detected [23382.897840] scsi host2: usb-storage 1-2.1:1.0 [23383.901629] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [23383.903184] sd 2:0:0:0: Attached scsi generic sg1 type 0 [23383.903453] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [23383.903719] sd 2:0:0:0: [sdb] Write Protect is off [23383.903729] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [23383.903970] sd 2:0:0:0: [sdb] No Caching mode page found [23383.903984] sd 2:0:0:0: [sdb] Assuming drive cache: write through [23383.909760] sdb: sdb4 [23383.910565] sd 2:0:0:0: [sdb] Attached SCSI removable disk [23384.354631] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [23420.343659] usb 1-2.1: USB disconnect, device number 32 [23711.392316] usb 1-2.1: new high-speed USB device number 33 using xhci_hcd [23711.494668] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [23711.494672] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [23711.494675] usb 1-2.1: Product: DT101 II [23711.494678] usb 1-2.1: Manufacturer: Kingston [23711.494680] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [23711.497355] usb-storage 1-2.1:1.0: USB Mass Storage device detected [23711.497704] scsi host2: usb-storage 1-2.1:1.0 [23712.509517] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [23712.510939] sd 2:0:0:0: Attached scsi generic sg1 type 0 [23712.511454] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [23712.511648] sd 2:0:0:0: [sdb] Write Protect is off [23712.511653] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [23712.511832] sd 2:0:0:0: [sdb] No Caching mode page found [23712.511840] sd 2:0:0:0: [sdb] Assuming drive cache: write through [23712.516105] sdb: sdb4 [23712.517922] sd 2:0:0:0: [sdb] Attached SCSI removable disk [23712.986236] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [23730.781787] usb 1-2.1: USB disconnect, device number 33 [24010.068722] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [24011.661071] PM: Syncing filesystems ... done. [24011.671098] PM: Preparing system for sleep (mem) [24011.671489] Freezing user space processes ... (elapsed 0.001 seconds) done. [24011.673358] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [24011.673461] Freezing remaining freezable tasks ... (elapsed 0.075 seconds) done. [24011.748628] PM: Suspending system (mem) [24011.748717] Suspending console(s) (use no_console_suspend to debug) [24011.965569] sd 1:0:0:0: [sda] Synchronizing SCSI cache [24011.965725] sd 1:0:0:0: [sda] Stopping disk [24011.978069] e1000e: EEE TX LPI TIMER: 00000011 [24012.366908] PM: suspend of devices complete after 402.434 msecs [24012.392581] PM: late suspend of devices complete after 25.657 msecs [24012.394126] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [24012.394651] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [24012.432242] PM: noirq suspend of devices complete after 39.648 msecs [24012.433020] ACPI: Preparing to enter system sleep state S3 [24012.760225] ACPI : EC: EC stopped [24012.760226] PM: Saving platform NVS memory [24012.760234] Disabling non-boot CPUs ... [24012.760935] Broke affinity for irq 279 [24012.762089] smpboot: CPU 1 is now offline [24012.777461] Broke affinity for irq 123 [24012.777467] Broke affinity for irq 124 [24012.777515] Broke affinity for irq 279 [24012.777520] Broke affinity for irq 281 [24012.779420] smpboot: CPU 2 is now offline [24012.809199] Broke affinity for irq 1 [24012.809205] Broke affinity for irq 8 [24012.809209] Broke affinity for irq 9 [24012.809213] Broke affinity for irq 12 [24012.809217] Broke affinity for irq 14 [24012.809222] Broke affinity for irq 16 [24012.809225] Broke affinity for irq 17 [24012.809236] Broke affinity for irq 122 [24012.809240] Broke affinity for irq 123 [24012.809243] Broke affinity for irq 124 [24012.809277] Broke affinity for irq 277 [24012.809281] Broke affinity for irq 279 [24012.809286] Broke affinity for irq 281 [24012.810381] smpboot: CPU 3 is now offline [24012.828712] ACPI: Low-level resume complete [24012.828712] ACPI : EC: EC started [24012.828712] PM: Restoring platform NVS memory [24012.828712] Enabling non-boot CPUs ... [24012.852243] x86: Booting SMP configuration: [24012.852244] smpboot: Booting Node 0 Processor 1 APIC 0x2 [24012.853906] cache: parent cpu1 should not be sleeping [24012.854072] CPU1 is up [24012.880397] smpboot: Booting Node 0 Processor 2 APIC 0x1 [24012.881647] cache: parent cpu2 should not be sleeping [24012.882068] CPU2 is up [24012.912475] smpboot: Booting Node 0 Processor 3 APIC 0x3 [24012.913678] cache: parent cpu3 should not be sleeping [24012.914160] CPU3 is up [24012.922420] ACPI: Waking up from system sleep state S3 [24013.108676] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [24013.108816] PM: noirq resume of devices complete after 38.961 msecs [24013.126545] PM: early resume of devices complete after 17.605 msecs [24013.127127] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [24013.128397] sd 1:0:0:0: [sda] Starting disk [24013.130835] rtc_cmos 00:03: System wakeup disabled by ACPI [24013.134785] [drm] GuC firmware load skipped [24013.176027] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [24013.176027] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [24013.440130] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [24013.440441] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [24013.440443] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [24013.440444] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [24013.440681] ata2.00: supports DRM functions and may not be fully accessible [24013.441986] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [24013.441987] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [24013.441988] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [24013.442207] ata2.00: supports DRM functions and may not be fully accessible [24013.443106] ata2.00: configured for UDMA/133 [24013.449022] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [24013.708901] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [24013.968769] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [24014.146122] PM: resume of devices complete after 1019.562 msecs [24014.146400] usb 1-7:1.0: rebind failed: -517 [24014.146405] usb 1-7:1.1: rebind failed: -517 [24014.146814] PM: Finishing wakeup. [24014.146816] Restarting tasks ... done. [24014.171938] Bluetooth: hci0: read Intel version: 370810011003110e00 [24014.171942] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [24014.483101] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [24014.844455] [drm] RC6 on [24015.672317] e1000e: enp0s31f6 NIC Link is Down [24015.673196] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [24015.675520] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [24015.675706] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [24015.742923] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [24015.743119] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [24015.763578] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [24015.766434] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [24015.956400] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [24016.059378] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [24020.586046] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [24020.588871] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [24020.593450] wlp3s0: authenticated [24020.596037] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [24020.600282] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=5) [24020.609358] wlp3s0: associated [24020.609399] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [24026.629791] systemd[1]: snapd.refresh.timer: Adding 3h 33min 4.171484s random time. [24026.827042] systemd[1]: snapd.refresh.timer: Adding 2h 2min 9.477452s random time. [24041.728480] usb 1-2.1: new high-speed USB device number 34 using xhci_hcd [24041.832522] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [24041.832528] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24041.832533] usb 1-2.1: Product: DT101 II [24041.832537] usb 1-2.1: Manufacturer: Kingston [24041.832540] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [24041.833678] usb-storage 1-2.1:1.0: USB Mass Storage device detected [24041.835972] scsi host2: usb-storage 1-2.1:1.0 [24042.845432] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [24042.846978] sd 2:0:0:0: Attached scsi generic sg1 type 0 [24042.847285] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [24042.847510] sd 2:0:0:0: [sdb] Write Protect is off [24042.847517] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [24042.847708] sd 2:0:0:0: [sdb] No Caching mode page found [24042.847719] sd 2:0:0:0: [sdb] Assuming drive cache: write through [24042.850049] sdb: sdb4 [24042.851966] sd 2:0:0:0: [sdb] Attached SCSI removable disk [24043.266943] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [24059.207445] usb 1-2.1: USB disconnect, device number 34 [24400.088146] usb 1-2.1: new high-speed USB device number 35 using xhci_hcd [24400.195891] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [24400.195899] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24400.195904] usb 1-2.1: Product: DT101 II [24400.195909] usb 1-2.1: Manufacturer: Kingston [24400.195913] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [24400.197031] usb-storage 1-2.1:1.0: USB Mass Storage device detected [24400.197490] scsi host2: usb-storage 1-2.1:1.0 [24401.213705] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [24401.215375] sd 2:0:0:0: Attached scsi generic sg1 type 0 [24401.215486] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [24401.215720] sd 2:0:0:0: [sdb] Write Protect is off [24401.215727] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [24401.215916] sd 2:0:0:0: [sdb] No Caching mode page found [24401.215928] sd 2:0:0:0: [sdb] Assuming drive cache: write through [24401.220234] sdb: sdb4 [24401.220999] sd 2:0:0:0: [sdb] Attached SCSI removable disk [24401.643679] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [24419.842545] usb 1-2.1: USB disconnect, device number 35 [24683.800110] usb 1-2.1: new high-speed USB device number 36 using xhci_hcd [24683.903994] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [24683.903999] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24683.904076] usb 1-2.1: Product: DT101 II [24683.904079] usb 1-2.1: Manufacturer: Kingston [24683.904081] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [24683.905144] usb-storage 1-2.1:1.0: USB Mass Storage device detected [24683.905386] scsi host2: usb-storage 1-2.1:1.0 [24684.925176] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [24684.926043] sd 2:0:0:0: Attached scsi generic sg1 type 0 [24684.926183] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [24684.926354] sd 2:0:0:0: [sdb] Write Protect is off [24684.926358] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [24684.928109] sd 2:0:0:0: [sdb] No Caching mode page found [24684.928133] sd 2:0:0:0: [sdb] Assuming drive cache: write through [24684.931291] sdb: sdb4 [24684.934241] sd 2:0:0:0: [sdb] Attached SCSI removable disk [24685.365996] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [24701.741637] usb 1-2.1: USB disconnect, device number 36 [24908.736201] usb 1-2.1: new high-speed USB device number 37 using xhci_hcd [24908.840122] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [24908.840129] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24908.840133] usb 1-2.1: Product: DT101 II [24908.840136] usb 1-2.1: Manufacturer: Kingston [24908.840139] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [24908.841403] usb-storage 1-2.1:1.0: USB Mass Storage device detected [24908.842179] scsi host2: usb-storage 1-2.1:1.0 [24909.853844] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [24909.855176] sd 2:0:0:0: Attached scsi generic sg1 type 0 [24909.855309] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [24909.855565] sd 2:0:0:0: [sdb] Write Protect is off [24909.855577] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [24909.855871] sd 2:0:0:0: [sdb] No Caching mode page found [24909.855884] sd 2:0:0:0: [sdb] Assuming drive cache: write through [24909.862127] sdb: sdb4 [24909.863578] sd 2:0:0:0: [sdb] Attached SCSI removable disk [24910.332694] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [24925.209046] usb 1-2.1: USB disconnect, device number 37 [25115.894187] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [25117.403603] PM: Syncing filesystems ... done. [25117.408122] PM: Preparing system for sleep (mem) [25117.408571] Freezing user space processes ... (elapsed 0.002 seconds) done. [25117.410603] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [25117.410842] Freezing remaining freezable tasks ... (elapsed 0.073 seconds) done. [25117.484735] PM: Suspending system (mem) [25117.484841] Suspending console(s) (use no_console_suspend to debug) [25117.701303] sd 1:0:0:0: [sda] Synchronizing SCSI cache [25117.702898] sd 1:0:0:0: [sda] Stopping disk [25117.713776] e1000e: EEE TX LPI TIMER: 00000011 [25117.852746] PM: suspend of devices complete after 152.243 msecs [25117.876528] PM: late suspend of devices complete after 23.767 msecs [25117.878559] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [25117.878735] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [25117.916236] PM: noirq suspend of devices complete after 39.694 msecs [25117.917014] ACPI: Preparing to enter system sleep state S3 [25118.244299] ACPI : EC: EC stopped [25118.244301] PM: Saving platform NVS memory [25118.244311] Disabling non-boot CPUs ... [25118.245165] Broke affinity for irq 279 [25118.246371] smpboot: CPU 1 is now offline [25118.261514] Broke affinity for irq 123 [25118.261521] Broke affinity for irq 124 [25118.261576] Broke affinity for irq 279 [25118.261583] Broke affinity for irq 281 [25118.263611] smpboot: CPU 2 is now offline [25118.293214] Broke affinity for irq 1 [25118.293220] Broke affinity for irq 8 [25118.293224] Broke affinity for irq 9 [25118.293228] Broke affinity for irq 12 [25118.293233] Broke affinity for irq 14 [25118.293237] Broke affinity for irq 16 [25118.293241] Broke affinity for irq 17 [25118.293251] Broke affinity for irq 122 [25118.293255] Broke affinity for irq 123 [25118.293259] Broke affinity for irq 124 [25118.293292] Broke affinity for irq 277 [25118.293297] Broke affinity for irq 279 [25118.293301] Broke affinity for irq 281 [25118.294395] smpboot: CPU 3 is now offline [25118.312391] ACPI: Low-level resume complete [25118.312391] ACPI : EC: EC started [25118.312391] PM: Restoring platform NVS memory [25118.312391] Enabling non-boot CPUs ... [25118.336237] x86: Booting SMP configuration: [25118.336238] smpboot: Booting Node 0 Processor 1 APIC 0x2 [25118.337888] cache: parent cpu1 should not be sleeping [25118.338067] CPU1 is up [25118.384429] smpboot: Booting Node 0 Processor 2 APIC 0x1 [25118.385773] cache: parent cpu2 should not be sleeping [25118.386199] CPU2 is up [25118.420500] smpboot: Booting Node 0 Processor 3 APIC 0x3 [25118.421783] cache: parent cpu3 should not be sleeping [25118.422278] CPU3 is up [25118.430666] ACPI: Waking up from system sleep state S3 [25118.616673] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [25118.616840] PM: noirq resume of devices complete after 38.983 msecs [25118.630811] PM: early resume of devices complete after 13.850 msecs [25118.631301] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [25118.631873] sd 1:0:0:0: [sda] Starting disk [25118.635978] rtc_cmos 00:03: System wakeup disabled by ACPI [25118.638917] [drm] GuC firmware load skipped [25118.680072] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [25118.680072] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [25118.945699] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [25118.946266] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [25118.946269] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [25118.946271] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25118.946656] ata2.00: supports DRM functions and may not be fully accessible [25118.948764] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [25118.948767] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [25118.948769] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25118.949056] ata2.00: supports DRM functions and may not be fully accessible [25118.950054] ata2.00: configured for UDMA/133 [25118.952882] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [25119.212900] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [25119.472951] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [25119.836461] [drm] RC6 on [25120.654339] PM: resume of devices complete after 2023.516 msecs [25120.654623] usb 1-7:1.0: rebind failed: -517 [25120.654628] usb 1-7:1.1: rebind failed: -517 [25120.655035] PM: Finishing wakeup. [25120.655037] Restarting tasks ... [25120.682604] Bluetooth: hci0: read Intel version: 370810011003110e00 [25120.692738] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [25120.692892] done. [25121.005909] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [25122.776602] e1000e: enp0s31f6 NIC Link is Down [25122.777620] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [25122.779106] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [25122.779297] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [25122.846927] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [25122.847133] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [25122.871075] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [25122.873831] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [25123.064520] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [25123.166489] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [25127.560598] wlp3s0: authenticate with 20:dc:e6:39:23:48 [25127.562916] wlp3s0: send auth to 20:dc:e6:39:23:48 (try 1/3) [25127.566809] wlp3s0: authenticated [25127.568041] wlp3s0: associate with 20:dc:e6:39:23:48 (try 1/3) [25127.573079] wlp3s0: RX AssocResp from 20:dc:e6:39:23:48 (capab=0x31 status=0 aid=2) [25127.581906] wlp3s0: associated [25127.581949] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [25133.012956] systemd[1]: snapd.refresh.timer: Adding 19min 18.609191s random time. [25138.261558] systemd[1]: snapd.refresh.timer: Adding 5h 15min 43.246158s random time. [25442.578467] wlp3s0: deauthenticating from 20:dc:e6:39:23:48 by local choice (Reason: 3=DEAUTH_LEAVING) [25444.251111] PM: Syncing filesystems ... done. [25444.255919] PM: Preparing system for sleep (mem) [25444.256376] Freezing user space processes ... (elapsed 0.001 seconds) done. [25444.258205] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [25444.258306] Freezing remaining freezable tasks ... (elapsed 0.074 seconds) done. [25444.332673] PM: Suspending system (mem) [25444.332779] Suspending console(s) (use no_console_suspend to debug) [25444.549332] sd 1:0:0:0: [sda] Synchronizing SCSI cache [25444.550864] sd 1:0:0:0: [sda] Stopping disk [25444.562052] e1000e: EEE TX LPI TIMER: 00000011 [25445.582055] PM: suspend of devices complete after 1033.550 msecs [25445.604587] PM: late suspend of devices complete after 22.509 msecs [25445.606443] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [25445.607628] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [25445.644289] PM: noirq suspend of devices complete after 39.683 msecs [25445.645261] ACPI: Preparing to enter system sleep state S3 [25445.972243] ACPI : EC: EC stopped [25445.972245] PM: Saving platform NVS memory [25445.972252] Disabling non-boot CPUs ... [25445.972948] Broke affinity for irq 279 [25445.974092] smpboot: CPU 1 is now offline [25445.989333] Broke affinity for irq 123 [25445.989339] Broke affinity for irq 124 [25445.989389] Broke affinity for irq 279 [25445.989394] Broke affinity for irq 281 [25445.991313] smpboot: CPU 2 is now offline [25446.009203] Broke affinity for irq 1 [25446.009210] Broke affinity for irq 8 [25446.009214] Broke affinity for irq 9 [25446.009218] Broke affinity for irq 12 [25446.009222] Broke affinity for irq 14 [25446.009226] Broke affinity for irq 16 [25446.009230] Broke affinity for irq 17 [25446.009241] Broke affinity for irq 122 [25446.009245] Broke affinity for irq 123 [25446.009249] Broke affinity for irq 124 [25446.009282] Broke affinity for irq 277 [25446.009287] Broke affinity for irq 279 [25446.009291] Broke affinity for irq 281 [25446.010385] smpboot: CPU 3 is now offline [25446.028397] ACPI: Low-level resume complete [25446.028397] ACPI : EC: EC started [25446.028397] PM: Restoring platform NVS memory [25446.028397] Enabling non-boot CPUs ... [25446.052240] x86: Booting SMP configuration: [25446.052240] smpboot: Booting Node 0 Processor 1 APIC 0x2 [25446.053905] cache: parent cpu1 should not be sleeping [25446.054070] CPU1 is up [25446.080371] smpboot: Booting Node 0 Processor 2 APIC 0x1 [25446.081527] cache: parent cpu2 should not be sleeping [25446.081903] CPU2 is up [25446.108479] smpboot: Booting Node 0 Processor 3 APIC 0x3 [25446.109566] cache: parent cpu3 should not be sleeping [25446.110006] CPU3 is up [25446.118253] ACPI: Waking up from system sleep state S3 [25446.304674] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [25446.304825] PM: noirq resume of devices complete after 38.969 msecs [25446.321008] PM: early resume of devices complete after 16.061 msecs [25446.321572] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [25446.322316] sd 1:0:0:0: [sda] Starting disk [25446.324856] rtc_cmos 00:03: System wakeup disabled by ACPI [25446.328224] [drm] GuC firmware load skipped [25446.372068] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [25446.372068] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [25446.633657] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [25446.634286] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [25446.634290] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [25446.634294] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25446.634663] ata2.00: supports DRM functions and may not be fully accessible [25446.636965] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [25446.636969] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [25446.636972] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25446.637194] ata2.00: supports DRM functions and may not be fully accessible [25446.638144] ata2.00: configured for UDMA/133 [25446.644911] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [25446.904906] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [25447.164933] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [25447.350943] PM: resume of devices complete after 1029.924 msecs [25447.351223] usb 1-7:1.0: rebind failed: -517 [25447.351228] usb 1-7:1.1: rebind failed: -517 [25447.351637] PM: Finishing wakeup. [25447.351639] Restarting tasks ... done. [25447.387456] Bluetooth: hci0: read Intel version: 370810011003110e00 [25447.387459] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [25447.701714] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [25447.804454] [drm] RC6 on [25449.220508] e1000e: enp0s31f6 NIC Link is Down [25449.221246] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [25449.223507] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [25449.223693] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [25449.291233] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [25449.291426] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [25449.313222] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [25449.316859] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [25449.508430] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [25449.615011] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [25454.061055] wlp3s0: authenticate with 20:dc:e6:39:23:48 [25454.067092] wlp3s0: send auth to 20:dc:e6:39:23:48 (try 1/3) [25454.069311] wlp3s0: authenticated [25454.072073] wlp3s0: associate with 20:dc:e6:39:23:48 (try 1/3) [25454.074873] wlp3s0: RX AssocResp from 20:dc:e6:39:23:48 (capab=0x31 status=0 aid=4) [25454.076511] wlp3s0: associated [25454.076631] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [25454.579031] systemd[1]: snapd.refresh.timer: Adding 2h 34min 18.243147s random time. [25459.793334] systemd[1]: snapd.refresh.timer: Adding 1h 3min 16.152709s random time. [27595.350716] c_list[22492]: segfault at 10 ip 000055dde9b1e252 sp 00007ffcdb7430f0 error 4 in c_list[55dde9b1b000+5000] [27749.395042] c_list[22554]: segfault at 10 ip 000055f4ada971a0 sp 00007ffeb2e62660 error 4 in c_list[55f4ada94000+5000] [27832.689878] c_list[22570]: segfault at 10 ip 0000560b361261ac sp 00007ffe5e5b6d40 error 4 in c_list[560b36123000+5000] [27862.020812] c_list[22586]: segfault at 10 ip 0000555e040021b8 sp 00007ffd3b344b40 error 4 in c_list[555e03fff000+5000] [27922.721458] c_list[22602]: segfault at 10 ip 000055af14efd1c4 sp 00007ffe0d9bc360 error 4 in c_list[55af14efa000+5000] [27967.417479] c_list[22621]: segfault at 10 ip 000055b289b4e0b7 sp 00007ffd15fa9bf0 error 4 in c_list[55b289b4b000+5000] [27978.985745] c_list[22655]: segfault at 10 ip 000055b5243340b7 sp 00007ffc42e9d690 error 4 in c_list[55b524331000+5000] [28051.086538] c_list[22667]: segfault at 10 ip 000055ea589ba0b7 sp 00007ffc633d94b0 error 4 in c_list[55ea589b7000+5000] [28119.112822] c_list[22692]: segfault at 10 ip 0000562ce67070b7 sp 00007ffe99a7c4d0 error 4 in c_list[562ce6704000+5000] [28193.992566] c_list[22737]: segfault at 10 ip 0000561620b980ad sp 00007ffd6b6edab0 error 4 in c_list[561620b95000+5000] [28804.213623] c_list[22970]: segfault at 28 ip 0000560fab51206a sp 00007ffe79227530 error 4 in c_list[560fab50f000+5000] [28830.112704] wlp3s0: deauthenticating from 20:dc:e6:39:23:48 by local choice (Reason: 3=DEAUTH_LEAVING) [28831.699769] PM: Syncing filesystems ... done. [28831.712689] PM: Preparing system for sleep (mem) [28831.713089] Freezing user space processes ... (elapsed 0.001 seconds) done. [28831.714972] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [28831.715082] Freezing remaining freezable tasks ... (elapsed 0.105 seconds) done. [28831.820319] PM: Suspending system (mem) [28831.820412] Suspending console(s) (use no_console_suspend to debug) [28832.037481] sd 1:0:0:0: [sda] Synchronizing SCSI cache [28832.039060] sd 1:0:0:0: [sda] Stopping disk [28832.050089] e1000e: EEE TX LPI TIMER: 00000011 [28832.462456] PM: suspend of devices complete after 425.964 msecs [28832.488300] PM: late suspend of devices complete after 25.829 msecs [28832.489670] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [28832.490439] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [28832.528239] PM: noirq suspend of devices complete after 39.926 msecs [28832.529018] ACPI: Preparing to enter system sleep state S3 [28832.856259] ACPI : EC: EC stopped [28832.856260] PM: Saving platform NVS memory [28832.856268] Disabling non-boot CPUs ... [28832.856983] Broke affinity for irq 279 [28832.858125] smpboot: CPU 1 is now offline [28832.873473] Broke affinity for irq 123 [28832.873479] Broke affinity for irq 124 [28832.873529] Broke affinity for irq 279 [28832.873535] Broke affinity for irq 281 [28832.875426] smpboot: CPU 2 is now offline [28832.901220] Broke affinity for irq 1 [28832.901226] Broke affinity for irq 8 [28832.901230] Broke affinity for irq 9 [28832.901235] Broke affinity for irq 12 [28832.901239] Broke affinity for irq 14 [28832.901243] Broke affinity for irq 16 [28832.901247] Broke affinity for irq 17 [28832.901258] Broke affinity for irq 122 [28832.901262] Broke affinity for irq 123 [28832.901266] Broke affinity for irq 124 [28832.901299] Broke affinity for irq 277 [28832.901304] Broke affinity for irq 279 [28832.901309] Broke affinity for irq 281 [28832.902404] smpboot: CPU 3 is now offline [28832.920386] ACPI: Low-level resume complete [28832.920386] ACPI : EC: EC started [28832.920386] PM: Restoring platform NVS memory [28832.920386] Enabling non-boot CPUs ... [28832.944246] x86: Booting SMP configuration: [28832.944247] smpboot: Booting Node 0 Processor 1 APIC 0x2 [28832.945917] cache: parent cpu1 should not be sleeping [28832.946083] CPU1 is up [28832.972377] smpboot: Booting Node 0 Processor 2 APIC 0x1 [28832.973546] cache: parent cpu2 should not be sleeping [28832.973926] CPU2 is up [28833.004484] smpboot: Booting Node 0 Processor 3 APIC 0x3 [28833.005726] cache: parent cpu3 should not be sleeping [28833.006210] CPU3 is up [28833.014478] ACPI: Waking up from system sleep state S3 [28833.200680] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [28833.200827] PM: noirq resume of devices complete after 38.975 msecs [28833.220995] PM: early resume of devices complete after 20.042 msecs [28833.221600] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [28833.222741] sd 1:0:0:0: [sda] Starting disk [28833.225881] rtc_cmos 00:03: System wakeup disabled by ACPI [28833.228130] [drm] GuC firmware load skipped [28833.272065] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [28833.272065] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [28833.533837] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [28833.534431] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [28833.534436] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [28833.534439] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [28833.534835] ata2.00: supports DRM functions and may not be fully accessible [28833.537327] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [28833.537331] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [28833.537335] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [28833.537569] ata2.00: supports DRM functions and may not be fully accessible [28833.538745] ata2.00: configured for UDMA/133 [28833.548890] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [28833.808859] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [28834.068884] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [28834.259163] PM: resume of devices complete after 1038.154 msecs [28834.259473] usb 1-7:1.0: rebind failed: -517 [28834.259477] usb 1-7:1.1: rebind failed: -517 [28834.259876] PM: Finishing wakeup. [28834.259878] Restarting tasks ... done. [28834.298560] Bluetooth: hci0: read Intel version: 370810011003110e00 [28834.298623] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [28834.616693] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [28834.812753] [drm] RC6 on [28836.139692] e1000e: enp0s31f6 NIC Link is Down [28836.141077] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [28836.143329] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [28836.143515] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [28836.210354] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [28836.210546] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [28836.227490] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [28836.230371] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [28836.420453] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [28836.526363] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [28841.129291] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [28841.136139] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [28841.140074] wlp3s0: authenticated [28841.144063] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [28841.149638] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=9) [28841.160147] wlp3s0: associated [28841.160270] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [28842.549835] systemd[1]: snapd.refresh.timer: Adding 4h 7min 59.076974s random time. [28842.803848] systemd[1]: snapd.refresh.timer: Adding 3h 15min 9.726122s random time. [28845.035960] c_list[23299]: segfault at 28 ip 0000556b388df06a sp 00007ffd9196c670 error 4 in c_list[556b388dc000+5000] [28879.489251] c_list[23321]: segfault at 28 ip 00005625950e106a sp 00007ffc95486680 error 4 in c_list[5625950de000+5000] [28886.651125] c_list[23329]: segfault at 28 ip 00005606e678406a sp 00007ffe3689d040 error 4 in c_list[5606e6781000+5000] [28898.548723] c_list[23363]: segfault at 28 ip 00005631bcc3f06a sp 00007ffc18528df0 error 4 in c_list[5631bcc3c000+5000] [28923.368881] c_list[23377]: segfault at 28 ip 0000560a4813a06a sp 00007ffc1c591920 error 4 in c_list[560a48137000+5000] [28938.162204] c_list[23409]: segfault at 28 ip 000055a881fce06a sp 00007ffc050af970 error 4 in c_list[55a881fcb000+5000] [28987.308133] c_list[23435]: segfault at 28 ip 000055fbedeca05e sp 00007fff8d809440 error 4 in c_list[55fbedec7000+5000] [29049.592913] c_list[23469]: segfault at 28 ip 0000557faa20b053 sp 00007ffedca08b90 error 4 in c_list[557faa208000+5000] [29093.248952] perf: interrupt took too long (3289 > 3227), lowering kernel.perf_event_max_sample_rate to 60750 [30807.777032] c_list[23937]: segfault at 28 ip 00005634375362fb sp 00007ffd438a64e0 error 4 in c_list[563437533000+5000] [31034.964374] c_list[24049]: segfault at 28 ip 000055c71ce40094 sp 00007ffe77e6db40 error 4 in c_list[55c71ce3d000+5000] [31060.058329] c_list[24065]: segfault at 28 ip 000056420f112094 sp 00007fff42b8dd10 error 4 in c_list[56420f10f000+5000] [31076.573896] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [31078.052645] PM: Syncing filesystems ... done. [31078.058159] PM: Preparing system for sleep (mem) [31078.058945] Freezing user space processes ... (elapsed 0.001 seconds) done. [31078.060933] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [31078.061174] Freezing remaining freezable tasks ... (elapsed 0.049 seconds) done. [31078.110973] PM: Suspending system (mem) [31078.111079] Suspending console(s) (use no_console_suspend to debug) [31078.325987] sd 1:0:0:0: [sda] Synchronizing SCSI cache [31078.327617] sd 1:0:0:0: [sda] Stopping disk [31078.338881] e1000e: EEE TX LPI TIMER: 00000011 [31078.476896] PM: suspend of devices complete after 152.200 msecs [31078.500295] PM: late suspend of devices complete after 23.385 msecs [31078.501369] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [31078.502148] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [31078.540261] PM: noirq suspend of devices complete after 39.952 msecs [31078.541038] ACPI: Preparing to enter system sleep state S3 [31078.868231] ACPI : EC: EC stopped [31078.868233] PM: Saving platform NVS memory [31078.868240] Disabling non-boot CPUs ... [31078.868797] Broke affinity for irq 279 [31078.869946] smpboot: CPU 1 is now offline [31078.885480] Broke affinity for irq 123 [31078.885486] Broke affinity for irq 124 [31078.885536] Broke affinity for irq 279 [31078.885540] Broke affinity for irq 281 [31078.887442] smpboot: CPU 2 is now offline [31078.913227] Broke affinity for irq 1 [31078.913234] Broke affinity for irq 8 [31078.913237] Broke affinity for irq 9 [31078.913242] Broke affinity for irq 12 [31078.913246] Broke affinity for irq 14 [31078.913250] Broke affinity for irq 16 [31078.913254] Broke affinity for irq 17 [31078.913265] Broke affinity for irq 122 [31078.913268] Broke affinity for irq 123 [31078.913273] Broke affinity for irq 124 [31078.913306] Broke affinity for irq 277 [31078.913310] Broke affinity for irq 279 [31078.913314] Broke affinity for irq 281 [31078.914408] smpboot: CPU 3 is now offline [31078.932376] ACPI: Low-level resume complete [31078.932376] ACPI : EC: EC started [31078.932376] PM: Restoring platform NVS memory [31078.932376] Enabling non-boot CPUs ... [31078.956246] x86: Booting SMP configuration: [31078.956246] smpboot: Booting Node 0 Processor 1 APIC 0x2 [31078.957908] cache: parent cpu1 should not be sleeping [31078.958075] CPU1 is up [31078.984368] smpboot: Booting Node 0 Processor 2 APIC 0x1 [31078.985537] cache: parent cpu2 should not be sleeping [31078.985918] CPU2 is up [31079.016524] smpboot: Booting Node 0 Processor 3 APIC 0x3 [31079.017671] cache: parent cpu3 should not be sleeping [31079.018123] CPU3 is up [31079.026471] ACPI: Waking up from system sleep state S3 [31079.220678] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [31079.220817] PM: noirq resume of devices complete after 38.960 msecs [31079.234564] PM: early resume of devices complete after 13.581 msecs [31079.235267] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [31079.235629] sd 1:0:0:0: [sda] Starting disk [31079.240488] rtc_cmos 00:03: System wakeup disabled by ACPI [31079.240920] [drm] GuC firmware load skipped [31079.284031] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [31079.284031] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [31079.551216] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [31079.551810] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [31079.551815] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [31079.551818] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [31079.552109] ata2.00: supports DRM functions and may not be fully accessible [31079.554787] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [31079.554791] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [31079.554795] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [31079.555116] ata2.00: supports DRM functions and may not be fully accessible [31079.556507] ata2.00: configured for UDMA/133 [31079.556511] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [31079.816864] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [31080.076971] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [31080.254099] PM: resume of devices complete after 1019.520 msecs [31080.254366] usb 1-7:1.0: rebind failed: -517 [31080.254371] usb 1-7:1.1: rebind failed: -517 [31080.254781] PM: Finishing wakeup. [31080.254783] Restarting tasks ... [31080.273991] Bluetooth: hci0: read Intel version: 370810011003110e00 [31080.273995] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [31080.291861] done. [31080.591128] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [31080.796452] [drm] RC6 on [31082.000625] e1000e: enp0s31f6 NIC Link is Down [31082.001565] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [31082.003692] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [31082.003881] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [31082.069995] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [31082.070198] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [31082.091893] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [31082.095121] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [31082.284466] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [31082.384466] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [31087.098147] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [31087.100954] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [31087.103066] wlp3s0: authenticated [31087.104040] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [31087.107838] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=15) [31087.110603] wlp3s0: associated [31087.110639] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [31087.499791] systemd[1]: snapd.refresh.timer: Adding 4h 6min 54.189036s random time. [31087.731342] systemd[1]: snapd.refresh.timer: Adding 3h 23min 33.725100s random time. [31102.129374] c_list[24430]: segfault at 28 ip 00005560fd967094 sp 00007ffd8be67db0 error 4 in c_list[5560fd964000+5000] [31118.623906] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [31120.183902] PM: Syncing filesystems ... done. [31120.193794] PM: Preparing system for sleep (mem) [31120.194303] Freezing user space processes ... (elapsed 0.001 seconds) done. [31120.196295] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [31120.196417] Freezing remaining freezable tasks ... (elapsed 0.066 seconds) done. [31120.262792] PM: Suspending system (mem) [31120.262863] Suspending console(s) (use no_console_suspend to debug) [31120.477400] sd 1:0:0:0: [sda] Synchronizing SCSI cache [31120.477575] sd 1:0:0:0: [sda] Stopping disk [31120.489646] e1000e: EEE TX LPI TIMER: 00000011 [31120.632978] PM: suspend of devices complete after 156.481 msecs [31120.660640] PM: late suspend of devices complete after 27.647 msecs [31120.661890] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [31120.662715] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [31120.700269] PM: noirq suspend of devices complete after 39.617 msecs [31120.701048] ACPI: Preparing to enter system sleep state S3 [31121.028231] ACPI : EC: EC stopped [31121.028232] PM: Saving platform NVS memory [31121.028240] Disabling non-boot CPUs ... [31121.028959] Broke affinity for irq 279 [31121.030882] smpboot: CPU 1 is now offline [31121.045483] Broke affinity for irq 123 [31121.045489] Broke affinity for irq 124 [31121.045537] Broke affinity for irq 279 [31121.045542] Broke affinity for irq 281 [31121.046682] smpboot: CPU 2 is now offline [31121.069096] Broke affinity for irq 1 [31121.069103] Broke affinity for irq 8 [31121.069108] Broke affinity for irq 9 [31121.069112] Broke affinity for irq 12 [31121.069116] Broke affinity for irq 14 [31121.069121] Broke affinity for irq 16 [31121.069125] Broke affinity for irq 17 [31121.069135] Broke affinity for irq 122 [31121.069139] Broke affinity for irq 123 [31121.069143] Broke affinity for irq 124 [31121.069177] Broke affinity for irq 277 [31121.069182] Broke affinity for irq 279 [31121.069186] Broke affinity for irq 281 [31121.070303] smpboot: CPU 3 is now offline [31121.084394] ACPI: Low-level resume complete [31121.084394] ACPI : EC: EC started [31121.084394] PM: Restoring platform NVS memory [31121.084394] Enabling non-boot CPUs ... [31121.108248] x86: Booting SMP configuration: [31121.108248] smpboot: Booting Node 0 Processor 1 APIC 0x2 [31121.109928] cache: parent cpu1 should not be sleeping [31121.110094] CPU1 is up [31121.160398] smpboot: Booting Node 0 Processor 2 APIC 0x1 [31121.161683] cache: parent cpu2 should not be sleeping [31121.162103] CPU2 is up [31121.184521] smpboot: Booting Node 0 Processor 3 APIC 0x3 [31121.185743] cache: parent cpu3 should not be sleeping [31121.186228] CPU3 is up [31121.194487] ACPI: Waking up from system sleep state S3 [31121.380654] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [31121.380828] PM: noirq resume of devices complete after 38.956 msecs [31121.394939] PM: early resume of devices complete after 13.989 msecs [31121.395371] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [31121.395866] sd 1:0:0:0: [sda] Starting disk [31121.400409] rtc_cmos 00:03: System wakeup disabled by ACPI [31121.403123] [drm] GuC firmware load skipped [31121.444059] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [31121.444059] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [31121.709140] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [31121.709537] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [31121.709538] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [31121.709539] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [31121.709840] ata2.00: supports DRM functions and may not be fully accessible [31121.711428] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [31121.711429] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [31121.711430] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [31121.711651] ata2.00: supports DRM functions and may not be fully accessible [31121.712548] ata2.00: configured for UDMA/133 [31121.716321] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [31121.976909] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [31122.237015] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [31122.844720] [drm] RC6 on [31124.437516] PM: resume of devices complete after 3042.562 msecs [31124.437811] usb 1-7:1.0: rebind failed: -517 [31124.437816] usb 1-7:1.1: rebind failed: -517 [31124.438269] PM: Finishing wakeup. [31124.438272] Restarting tasks ... done. [31124.466425] Bluetooth: hci0: read Intel version: 370810011003110e00 [31124.466467] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [31124.784569] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [31125.988437] e1000e: enp0s31f6 NIC Link is Down [31125.989162] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [31125.991495] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [31125.991681] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [31126.057950] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [31126.058154] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [31126.078986] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [31126.081502] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [31126.272423] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [31126.359081] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [31131.089714] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [31131.095084] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [31131.098201] wlp3s0: authenticated [31131.100084] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [31131.104374] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=15) [31131.107493] wlp3s0: associated [31131.107529] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [31131.492677] systemd[1]: snapd.refresh.timer: Adding 3h 26min 29.477200s random time. [31131.706719] systemd[1]: snapd.refresh.timer: Adding 5h 48min 30.842885s random time. [32520.217766] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [32521.730506] PM: Syncing filesystems ... done. [32521.736527] PM: Preparing system for sleep (mem) [32521.737003] Freezing user space processes ... (elapsed 0.001 seconds) done. [32521.738848] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [32521.738953] Freezing remaining freezable tasks ... (elapsed 0.021 seconds) done. [32521.760668] PM: Suspending system (mem) [32521.760701] Suspending console(s) (use no_console_suspend to debug) [32521.980577] sd 1:0:0:0: [sda] Synchronizing SCSI cache [32521.982071] sd 1:0:0:0: [sda] Stopping disk [32521.993033] e1000e: EEE TX LPI TIMER: 00000011 [32523.013918] PM: suspend of devices complete after 1037.155 msecs [32523.036176] PM: late suspend of devices complete after 22.248 msecs [32523.037264] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [32523.038032] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [32523.076248] PM: noirq suspend of devices complete after 40.060 msecs [32523.077027] ACPI: Preparing to enter system sleep state S3 [32523.404229] ACPI : EC: EC stopped [32523.404230] PM: Saving platform NVS memory [32523.404238] Disabling non-boot CPUs ... [32523.404958] Broke affinity for irq 279 [32523.406102] smpboot: CPU 1 is now offline [32523.421338] Broke affinity for irq 123 [32523.421344] Broke affinity for irq 124 [32523.421394] Broke affinity for irq 279 [32523.421398] Broke affinity for irq 281 [32523.423301] smpboot: CPU 2 is now offline [32523.441231] Broke affinity for irq 1 [32523.441238] Broke affinity for irq 8 [32523.441243] Broke affinity for irq 9 [32523.441247] Broke affinity for irq 12 [32523.441251] Broke affinity for irq 14 [32523.441255] Broke affinity for irq 16 [32523.441259] Broke affinity for irq 17 [32523.441270] Broke affinity for irq 122 [32523.441274] Broke affinity for irq 123 [32523.441277] Broke affinity for irq 124 [32523.441311] Broke affinity for irq 277 [32523.441315] Broke affinity for irq 279 [32523.441319] Broke affinity for irq 281 [32523.442414] smpboot: CPU 3 is now offline [32523.460399] ACPI: Low-level resume complete [32523.460399] ACPI : EC: EC started [32523.460399] PM: Restoring platform NVS memory [32523.460399] Enabling non-boot CPUs ... [32523.484241] x86: Booting SMP configuration: [32523.484241] smpboot: Booting Node 0 Processor 1 APIC 0x2 [32523.485904] cache: parent cpu1 should not be sleeping [32523.486068] CPU1 is up [32523.512395] smpboot: Booting Node 0 Processor 2 APIC 0x1 [32523.513635] cache: parent cpu2 should not be sleeping [32523.514051] CPU2 is up [32523.544474] smpboot: Booting Node 0 Processor 3 APIC 0x3 [32523.545656] cache: parent cpu3 should not be sleeping [32523.546090] CPU3 is up [32523.554296] ACPI: Waking up from system sleep state S3 [32523.724695] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [32523.724850] PM: noirq resume of devices complete after 38.991 msecs [32523.740229] PM: early resume of devices complete after 15.254 msecs [32523.740903] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [32523.741601] sd 1:0:0:0: [sda] Starting disk [32523.743809] rtc_cmos 00:03: System wakeup disabled by ACPI [32523.748705] [drm] GuC firmware load skipped [32523.792031] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [32523.792031] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [32524.052571] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [32524.053317] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [32524.053320] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [32524.053322] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [32524.053725] ata2.00: supports DRM functions and may not be fully accessible [32524.056250] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [32524.056253] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [32524.056255] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [32524.056479] ata2.00: supports DRM functions and may not be fully accessible [32524.057407] ata2.00: configured for UDMA/133 [32524.064917] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [32524.324965] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [32524.584892] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [32524.775592] PM: resume of devices complete after 1035.348 msecs [32524.775848] usb 1-7:1.0: rebind failed: -517 [32524.775853] usb 1-7:1.1: rebind failed: -517 [32524.776338] PM: Finishing wakeup. [32524.776340] Restarting tasks ... done. [32524.810673] Bluetooth: hci0: read Intel version: 370810011003110e00 [32524.810677] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [32524.828545] [drm] RC6 on [32525.128725] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [32526.472299] e1000e: enp0s31f6 NIC Link is Down [32526.473486] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [32526.475716] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32526.475901] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32526.542088] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32526.542308] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32526.560270] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [32526.561241] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [32526.752571] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [32526.863405] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [32531.601495] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [32531.604116] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [32531.608225] wlp3s0: authenticated [32531.612122] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [32531.620972] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=14) [32531.628189] wlp3s0: associated [32531.628235] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [32532.022553] systemd[1]: snapd.refresh.timer: Adding 55min 34.658675s random time. [32532.238606] systemd[1]: snapd.refresh.timer: Adding 4h 58min 40.554657s random time. [32627.736170] usb 1-2.2: new high-speed USB device number 38 using xhci_hcd [32627.839172] usb 1-2.2: New USB device found, idVendor=0951, idProduct=1625 [32627.839178] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [32627.839182] usb 1-2.2: Product: DT101 II [32627.839185] usb 1-2.2: Manufacturer: Kingston [32627.839188] usb 1-2.2: SerialNumber: 001CC0EC3519F04127E4155C [32627.840218] usb-storage 1-2.2:1.0: USB Mass Storage device detected [32627.840416] scsi host2: usb-storage 1-2.2:1.0 [32628.861132] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [32628.862562] sd 2:0:0:0: Attached scsi generic sg1 type 0 [32628.862566] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [32628.865756] sd 2:0:0:0: [sdb] Write Protect is off [32628.865758] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [32628.866430] sd 2:0:0:0: [sdb] No Caching mode page found [32628.866433] sd 2:0:0:0: [sdb] Assuming drive cache: write through [32628.867970] sdb: sdb4 [32628.868831] sd 2:0:0:0: [sdb] Attached SCSI removable disk [32629.305122] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [32643.551214] usb 1-2.2: USB disconnect, device number 38 [32644.820120] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [32646.397164] PM: Syncing filesystems ... done. [32646.408058] PM: Preparing system for sleep (mem) [32646.408468] Freezing user space processes ... (elapsed 0.001 seconds) done. [32646.410375] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [32646.410500] Freezing remaining freezable tasks ... (elapsed 0.083 seconds) done. [32646.493983] PM: Suspending system (mem) [32646.494075] Suspending console(s) (use no_console_suspend to debug) [32646.710129] sd 1:0:0:0: [sda] Synchronizing SCSI cache [32646.710653] sd 1:0:0:0: [sda] Stopping disk [32646.723181] e1000e: EEE TX LPI TIMER: 00000011 [32646.864517] PM: suspend of devices complete after 155.578 msecs [32646.892532] PM: late suspend of devices complete after 27.999 msecs [32646.893920] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [32646.894778] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [32646.932238] PM: noirq suspend of devices complete after 39.693 msecs [32646.933017] ACPI: Preparing to enter system sleep state S3 [32647.260247] ACPI : EC: EC stopped [32647.260249] PM: Saving platform NVS memory [32647.260258] Disabling non-boot CPUs ... [32647.260872] Broke affinity for irq 279 [32647.262044] smpboot: CPU 1 is now offline [32647.277648] Broke affinity for irq 123 [32647.277655] Broke affinity for irq 124 [32647.277710] Broke affinity for irq 279 [32647.277717] Broke affinity for irq 281 [32647.279731] smpboot: CPU 2 is now offline [32647.309208] Broke affinity for irq 1 [32647.309215] Broke affinity for irq 8 [32647.309219] Broke affinity for irq 9 [32647.309223] Broke affinity for irq 12 [32647.309228] Broke affinity for irq 14 [32647.309232] Broke affinity for irq 16 [32647.309236] Broke affinity for irq 17 [32647.309247] Broke affinity for irq 122 [32647.309250] Broke affinity for irq 123 [32647.309254] Broke affinity for irq 124 [32647.309287] Broke affinity for irq 277 [32647.309291] Broke affinity for irq 279 [32647.309295] Broke affinity for irq 281 [32647.310390] smpboot: CPU 3 is now offline [32647.328382] ACPI: Low-level resume complete [32647.328382] ACPI : EC: EC started [32647.328382] PM: Restoring platform NVS memory [32647.328382] Enabling non-boot CPUs ... [32647.352244] x86: Booting SMP configuration: [32647.352245] smpboot: Booting Node 0 Processor 1 APIC 0x2 [32647.353927] cache: parent cpu1 should not be sleeping [32647.354093] CPU1 is up [32647.380398] smpboot: Booting Node 0 Processor 2 APIC 0x1 [32647.381692] cache: parent cpu2 should not be sleeping [32647.382108] CPU2 is up [32647.412475] smpboot: Booting Node 0 Processor 3 APIC 0x3 [32647.413581] cache: parent cpu3 should not be sleeping [32647.414070] CPU3 is up [32647.422339] ACPI: Waking up from system sleep state S3 [32647.608677] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [32647.608819] PM: noirq resume of devices complete after 38.971 msecs [32647.621240] PM: early resume of devices complete after 12.297 msecs [32647.621694] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [32647.622037] sd 1:0:0:0: [sda] Starting disk [32647.627099] rtc_cmos 00:03: System wakeup disabled by ACPI [32647.628494] [drm] GuC firmware load skipped [32647.672091] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [32647.672091] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [32647.932438] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [32647.932995] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [32647.932998] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [32647.933000] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [32647.933418] ata2.00: supports DRM functions and may not be fully accessible [32647.935446] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [32647.935449] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [32647.935451] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [32647.935770] ata2.00: supports DRM functions and may not be fully accessible [32647.937343] ata2.00: configured for UDMA/133 [32647.944691] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [32648.204900] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [32648.464978] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [32648.796697] [drm] RC6 on [32650.664520] PM: resume of devices complete after 3043.265 msecs [32650.664814] usb 1-7:1.0: rebind failed: -517 [32650.664819] usb 1-7:1.1: rebind failed: -517 [32650.665250] PM: Finishing wakeup. [32650.665252] Restarting tasks ... [32650.685595] Bluetooth: hci0: read Intel version: 370810011003110e00 [32650.702759] done. [32650.703744] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [32651.022675] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [32652.516440] e1000e: enp0s31f6 NIC Link is Down [32652.517300] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [32652.519569] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32652.519755] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32652.586601] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32652.586789] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32652.608694] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [32652.611067] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [32652.800394] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [32652.898773] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [32657.486799] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [32657.492572] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [32657.495585] wlp3s0: authenticated [32657.497546] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [32657.508697] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=14) [32657.512555] wlp3s0: associated [32657.512593] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [32657.912491] systemd[1]: snapd.refresh.timer: Adding 3h 15min 26.141327s random time. [32658.124985] systemd[1]: snapd.refresh.timer: Adding 1h 50min 19.639347s random time. [32778.279860] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [32779.824748] PM: Syncing filesystems ... done. [32779.829373] PM: Preparing system for sleep (mem) [32779.829929] Freezing user space processes ... (elapsed 0.001 seconds) done. [32779.831813] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [32779.831930] Freezing remaining freezable tasks ... (elapsed 0.063 seconds) done. [32779.895126] PM: Suspending system (mem) [32779.895232] Suspending console(s) (use no_console_suspend to debug) [32780.109286] sd 1:0:0:0: [sda] Synchronizing SCSI cache [32780.110971] sd 1:0:0:0: [sda] Stopping disk [32780.121265] e1000e: EEE TX LPI TIMER: 00000011 [32780.264626] PM: suspend of devices complete after 156.154 msecs [32780.288515] PM: late suspend of devices complete after 23.874 msecs [32780.289668] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [32780.290457] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [32780.328258] PM: noirq suspend of devices complete after 39.729 msecs [32780.329063] ACPI: Preparing to enter system sleep state S3 [32780.656235] ACPI : EC: EC stopped [32780.656236] PM: Saving platform NVS memory [32780.656244] Disabling non-boot CPUs ... [32780.656934] Broke affinity for irq 279 [32780.658082] smpboot: CPU 1 is now offline [32780.673481] Broke affinity for irq 123 [32780.673487] Broke affinity for irq 124 [32780.673537] Broke affinity for irq 279 [32780.673542] Broke affinity for irq 281 [32780.675444] smpboot: CPU 2 is now offline [32780.701251] Broke affinity for irq 1 [32780.701258] Broke affinity for irq 8 [32780.701262] Broke affinity for irq 9 [32780.701267] Broke affinity for irq 12 [32780.701271] Broke affinity for irq 14 [32780.701275] Broke affinity for irq 16 [32780.701279] Broke affinity for irq 17 [32780.701290] Broke affinity for irq 122 [32780.701294] Broke affinity for irq 123 [32780.701298] Broke affinity for irq 124 [32780.701329] Broke affinity for irq 277 [32780.701334] Broke affinity for irq 279 [32780.701338] Broke affinity for irq 281 [32780.702433] smpboot: CPU 3 is now offline [32780.720392] ACPI: Low-level resume complete [32780.720392] ACPI : EC: EC started [32780.720392] PM: Restoring platform NVS memory [32780.720392] Enabling non-boot CPUs ... [32780.744242] x86: Booting SMP configuration: [32780.744242] smpboot: Booting Node 0 Processor 1 APIC 0x2 [32780.745925] cache: parent cpu1 should not be sleeping [32780.746091] CPU1 is up [32780.772397] smpboot: Booting Node 0 Processor 2 APIC 0x1 [32780.773677] cache: parent cpu2 should not be sleeping [32780.774084] CPU2 is up [32780.804512] smpboot: Booting Node 0 Processor 3 APIC 0x3 [32780.805836] cache: parent cpu3 should not be sleeping [32780.806311] CPU3 is up [32780.814573] ACPI: Waking up from system sleep state S3 [32781.000689] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [32781.000862] PM: noirq resume of devices complete after 39.011 msecs [32781.014930] PM: early resume of devices complete after 13.945 msecs [32781.015409] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [32781.015909] sd 1:0:0:0: [sda] Starting disk [32781.019802] rtc_cmos 00:03: System wakeup disabled by ACPI [32781.021976] [drm] GuC firmware load skipped [32781.064090] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [32781.064090] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [32781.328382] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [32781.329081] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [32781.329084] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [32781.329086] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [32781.329642] ata2.00: supports DRM functions and may not be fully accessible [32781.331760] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [32781.331763] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [32781.331765] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [32781.332081] ata2.00: supports DRM functions and may not be fully accessible [32781.333372] ata2.00: configured for UDMA/133 [32781.336552] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [32781.596883] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [32781.856926] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [32782.812713] [drm] RC6 on [32785.069333] PM: resume of devices complete after 4054.384 msecs [32785.069762] usb 1-7:1.0: rebind failed: -517 [32785.069769] usb 1-7:1.1: rebind failed: -517 [32785.070380] PM: Finishing wakeup. [32785.070383] Restarting tasks ... done. [32785.102429] Bluetooth: hci0: read Intel version: 370810011003110e00 [32785.102433] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [32785.420882] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [32786.920443] e1000e: enp0s31f6 NIC Link is Down [32786.921258] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [32786.923535] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32786.923721] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32786.990883] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32786.991072] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [32787.010544] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [32787.012745] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [32787.204764] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [32787.300331] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [32791.926512] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [32791.936053] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [32791.938799] wlp3s0: authenticated [32791.940040] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [32791.943843] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=14) [32791.946516] wlp3s0: associated [32791.946558] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [32792.270142] systemd[1]: snapd.refresh.timer: Adding 1h 54min 30.870641s random time. [32792.598096] systemd[1]: snapd.refresh.timer: Adding 26min 40.522757s random time. [32862.592152] usb 1-2.1: new high-speed USB device number 39 using xhci_hcd [32862.696840] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [32862.696848] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [32862.696854] usb 1-2.1: Product: DT101 II [32862.696858] usb 1-2.1: Manufacturer: Kingston [32862.696862] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [32862.698374] usb-storage 1-2.1:1.0: USB Mass Storage device detected [32862.700300] scsi host2: usb-storage 1-2.1:1.0 [32863.709490] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [32863.710740] sd 2:0:0:0: Attached scsi generic sg1 type 0 [32863.710941] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [32863.712148] sd 2:0:0:0: [sdb] Write Protect is off [32863.712160] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [32863.712706] sd 2:0:0:0: [sdb] No Caching mode page found [32863.712722] sd 2:0:0:0: [sdb] Assuming drive cache: write through [32863.715185] sdb: sdb4 [32863.716470] sd 2:0:0:0: [sdb] Attached SCSI removable disk [32864.157778] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [32877.529628] usb 1-2.1: USB disconnect, device number 39 [33667.116483] usb 1-2.1: new high-speed USB device number 40 using xhci_hcd [33667.218591] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [33667.218596] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [33667.218599] usb 1-2.1: Product: DT101 II [33667.218601] usb 1-2.1: Manufacturer: Kingston [33667.218604] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [33667.219431] usb-storage 1-2.1:1.0: USB Mass Storage device detected [33667.220125] scsi host2: usb-storage 1-2.1:1.0 [33668.252754] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [33668.253652] sd 2:0:0:0: Attached scsi generic sg1 type 0 [33668.253788] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [33668.253968] sd 2:0:0:0: [sdb] Write Protect is off [33668.253974] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [33668.254155] sd 2:0:0:0: [sdb] No Caching mode page found [33668.254164] sd 2:0:0:0: [sdb] Assuming drive cache: write through [33668.256639] sdb: sdb4 [33668.260467] sd 2:0:0:0: [sdb] Attached SCSI removable disk [33668.717761] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [33682.916536] usb 1-2.1: USB disconnect, device number 40 [33813.369832] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [33814.933509] PM: Syncing filesystems ... done. [33814.942491] PM: Preparing system for sleep (mem) [33814.942886] Freezing user space processes ... (elapsed 0.001 seconds) done. [33814.944208] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [33814.944311] Freezing remaining freezable tasks ... (elapsed 0.082 seconds) done. [33815.026779] PM: Suspending system (mem) [33815.026871] Suspending console(s) (use no_console_suspend to debug) [33815.241897] sd 1:0:0:0: [sda] Synchronizing SCSI cache [33815.242038] sd 1:0:0:0: [sda] Stopping disk [33815.254774] e1000e: EEE TX LPI TIMER: 00000011 [33815.400901] PM: suspend of devices complete after 160.036 msecs [33815.424646] PM: late suspend of devices complete after 23.733 msecs [33815.425939] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [33815.426738] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [33815.464268] PM: noirq suspend of devices complete after 39.609 msecs [33815.465046] ACPI: Preparing to enter system sleep state S3 [33815.792258] ACPI : EC: EC stopped [33815.792260] PM: Saving platform NVS memory [33815.792270] Disabling non-boot CPUs ... [33815.792980] Broke affinity for irq 279 [33815.794158] smpboot: CPU 1 is now offline [33815.809627] Broke affinity for irq 123 [33815.809634] Broke affinity for irq 124 [33815.809689] Broke affinity for irq 279 [33815.809694] Broke affinity for irq 281 [33815.811711] smpboot: CPU 2 is now offline [33815.837196] Broke affinity for irq 1 [33815.837203] Broke affinity for irq 8 [33815.837207] Broke affinity for irq 9 [33815.837212] Broke affinity for irq 12 [33815.837216] Broke affinity for irq 14 [33815.837220] Broke affinity for irq 16 [33815.837224] Broke affinity for irq 17 [33815.837235] Broke affinity for irq 122 [33815.837238] Broke affinity for irq 123 [33815.837242] Broke affinity for irq 124 [33815.837276] Broke affinity for irq 277 [33815.837281] Broke affinity for irq 279 [33815.837285] Broke affinity for irq 281 [33815.838401] smpboot: CPU 3 is now offline [33815.856728] ACPI: Low-level resume complete [33815.856728] ACPI : EC: EC started [33815.856728] PM: Restoring platform NVS memory [33815.856728] Enabling non-boot CPUs ... [33815.880248] x86: Booting SMP configuration: [33815.880249] smpboot: Booting Node 0 Processor 1 APIC 0x2 [33815.881920] cache: parent cpu1 should not be sleeping [33815.882088] CPU1 is up [33815.908398] smpboot: Booting Node 0 Processor 2 APIC 0x1 [33815.909659] cache: parent cpu2 should not be sleeping [33815.910077] CPU2 is up [33815.952476] smpboot: Booting Node 0 Processor 3 APIC 0x3 [33815.953552] cache: parent cpu3 should not be sleeping [33815.953997] CPU3 is up [33815.962183] ACPI: Waking up from system sleep state S3 [33816.148666] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [33816.148836] PM: noirq resume of devices complete after 38.954 msecs [33816.162317] PM: early resume of devices complete after 13.356 msecs [33816.162927] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [33816.163678] sd 1:0:0:0: [sda] Starting disk [33816.166262] rtc_cmos 00:03: System wakeup disabled by ACPI [33816.170550] [drm] GuC firmware load skipped [33816.212050] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [33816.212050] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [33816.477875] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [33816.478483] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [33816.478486] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [33816.478488] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [33816.478881] ata2.00: supports DRM functions and may not be fully accessible [33816.481595] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [33816.481598] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [33816.481601] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [33816.481992] ata2.00: supports DRM functions and may not be fully accessible [33816.483177] ata2.00: configured for UDMA/133 [33816.484512] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [33816.744983] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [33817.005012] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [33817.820697] [drm] RC6 on [33819.213901] PM: resume of devices complete after 3051.567 msecs [33819.214261] usb 1-7:1.0: rebind failed: -517 [33819.214274] usb 1-7:1.1: rebind failed: -517 [33819.214751] PM: Finishing wakeup. [33819.214754] Restarting tasks ... done. [33819.242746] Bluetooth: hci0: read Intel version: 370810011003110e00 [33819.242783] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [33819.561972] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [33820.932392] e1000e: enp0s31f6 NIC Link is Down [33820.933605] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [33820.935879] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [33820.936136] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [33821.003623] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [33821.003817] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [33821.027530] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [33821.030081] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [33821.220469] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [33821.329112] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [33825.947269] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [33825.956148] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [33825.967291] wlp3s0: authenticated [33825.972087] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [33825.993549] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=5) [33825.994794] wlp3s0: associated [33825.994883] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [33826.420673] systemd[1]: snapd.refresh.timer: Adding 2h 19min 46.501015s random time. [33826.619492] systemd[1]: snapd.refresh.timer: Adding 4h 10min 55.007123s random time. [33976.276407] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [33977.839724] PM: Syncing filesystems ... done. [33977.850507] PM: Preparing system for sleep (mem) [33977.850969] Freezing user space processes ... (elapsed 0.001 seconds) done. [33977.852945] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [33977.853064] Freezing remaining freezable tasks ... (elapsed 0.049 seconds) done. [33977.902091] PM: Suspending system (mem) [33977.902132] Suspending console(s) (use no_console_suspend to debug) [33978.118032] sd 1:0:0:0: [sda] Synchronizing SCSI cache [33978.118184] sd 1:0:0:0: [sda] Stopping disk [33978.130142] e1000e: EEE TX LPI TIMER: 00000011 [33978.273103] PM: suspend of devices complete after 156.306 msecs [33978.296660] PM: late suspend of devices complete after 23.543 msecs [33978.298054] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [33978.298903] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [33978.336260] PM: noirq suspend of devices complete after 39.585 msecs [33978.337038] ACPI: Preparing to enter system sleep state S3 [33978.664232] ACPI : EC: EC stopped [33978.664233] PM: Saving platform NVS memory [33978.664241] Disabling non-boot CPUs ... [33978.664941] Broke affinity for irq 279 [33978.666090] smpboot: CPU 1 is now offline [33978.681489] Broke affinity for irq 123 [33978.681496] Broke affinity for irq 124 [33978.681545] Broke affinity for irq 279 [33978.681550] Broke affinity for irq 281 [33978.683440] smpboot: CPU 2 is now offline [33978.709230] Broke affinity for irq 1 [33978.709237] Broke affinity for irq 8 [33978.709241] Broke affinity for irq 9 [33978.709245] Broke affinity for irq 12 [33978.709250] Broke affinity for irq 14 [33978.709254] Broke affinity for irq 16 [33978.709258] Broke affinity for irq 17 [33978.709269] Broke affinity for irq 122 [33978.709272] Broke affinity for irq 123 [33978.709276] Broke affinity for irq 124 [33978.709309] Broke affinity for irq 277 [33978.709314] Broke affinity for irq 279 [33978.709318] Broke affinity for irq 281 [33978.710412] smpboot: CPU 3 is now offline [33978.728384] ACPI: Low-level resume complete [33978.728384] ACPI : EC: EC started [33978.728384] PM: Restoring platform NVS memory [33978.728384] Enabling non-boot CPUs ... [33978.752249] x86: Booting SMP configuration: [33978.752249] smpboot: Booting Node 0 Processor 1 APIC 0x2 [33978.753929] cache: parent cpu1 should not be sleeping [33978.754093] CPU1 is up [33978.780406] smpboot: Booting Node 0 Processor 2 APIC 0x1 [33978.781697] cache: parent cpu2 should not be sleeping [33978.782107] CPU2 is up [33978.812593] smpboot: Booting Node 0 Processor 3 APIC 0x3 [33978.813902] cache: parent cpu3 should not be sleeping [33978.814399] CPU3 is up [33978.822663] ACPI: Waking up from system sleep state S3 [33979.008673] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [33979.008816] PM: noirq resume of devices complete after 38.983 msecs [33979.021203] PM: early resume of devices complete after 12.266 msecs [33979.021680] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [33979.022146] sd 1:0:0:0: [sda] Starting disk [33979.027284] rtc_cmos 00:03: System wakeup disabled by ACPI [33979.028415] [drm] GuC firmware load skipped [33979.072075] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [33979.072075] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [33979.332470] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [33979.333049] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [33979.333051] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [33979.333053] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [33979.333428] ata2.00: supports DRM functions and may not be fully accessible [33979.336038] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [33979.336042] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [33979.336044] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [33979.336396] ata2.00: supports DRM functions and may not be fully accessible [33979.337853] ata2.00: configured for UDMA/133 [33979.344907] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [33979.604967] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [33979.864815] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [33980.042043] PM: resume of devices complete after 1020.829 msecs [33980.042315] usb 1-7:1.0: rebind failed: -517 [33980.042320] usb 1-7:1.1: rebind failed: -517 [33980.042729] PM: Finishing wakeup. [33980.042731] Restarting tasks ... [33980.061560] Bluetooth: hci0: read Intel version: 370810011003110e00 [33980.061564] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [33980.071970] done. [33980.377809] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [33980.796703] [drm] RC6 on [33981.820316] e1000e: enp0s31f6 NIC Link is Down [33981.821137] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [33981.823254] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [33981.823443] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [33981.889642] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [33981.889843] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [33981.911763] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [33981.914648] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [33982.104778] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [33982.208194] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [33986.891421] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [33986.897154] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [33986.899106] wlp3s0: authenticated [33986.900069] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [33986.903972] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=5) [33986.908831] wlp3s0: associated [33986.908918] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [33987.305595] systemd[1]: snapd.refresh.timer: Adding 3h 2min 27.511107s random time. [33987.493871] systemd[1]: snapd.refresh.timer: Adding 5h 16min 33.365646s random time. [34188.896420] usb 1-2.1: new high-speed USB device number 41 using xhci_hcd [34188.999134] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [34188.999139] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [34188.999143] usb 1-2.1: Product: DT101 II [34188.999146] usb 1-2.1: Manufacturer: Kingston [34188.999149] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [34189.000062] usb-storage 1-2.1:1.0: USB Mass Storage device detected [34189.000397] scsi host2: usb-storage 1-2.1:1.0 [34190.012935] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [34190.014207] sd 2:0:0:0: Attached scsi generic sg1 type 0 [34190.017747] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [34190.018021] sd 2:0:0:0: [sdb] Write Protect is off [34190.018028] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [34190.018242] sd 2:0:0:0: [sdb] No Caching mode page found [34190.018251] sd 2:0:0:0: [sdb] Assuming drive cache: write through [34190.020357] sdb: sdb4 [34190.021691] sd 2:0:0:0: [sdb] Attached SCSI removable disk [34190.431152] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [34210.961719] usb 1-2.1: USB disconnect, device number 41 [34522.456190] usb 1-2.1: new high-speed USB device number 42 using xhci_hcd [34522.558904] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [34522.558909] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [34522.558912] usb 1-2.1: Product: DT101 II [34522.558915] usb 1-2.1: Manufacturer: Kingston [34522.558917] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [34522.559791] usb-storage 1-2.1:1.0: USB Mass Storage device detected [34522.560315] scsi host2: usb-storage 1-2.1:1.0 [34523.581676] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [34523.583187] sd 2:0:0:0: Attached scsi generic sg1 type 0 [34523.583497] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [34523.583724] sd 2:0:0:0: [sdb] Write Protect is off [34523.583733] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [34523.583960] sd 2:0:0:0: [sdb] No Caching mode page found [34523.583982] sd 2:0:0:0: [sdb] Assuming drive cache: write through [34523.588756] sdb: sdb4 [34523.592509] sd 2:0:0:0: [sdb] Attached SCSI removable disk [34524.038595] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [34539.158185] usb 1-2.1: USB disconnect, device number 42 [35001.883930] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [35002.582934] PM: Syncing filesystems ... done. [35002.585984] PM: Preparing system for sleep (mem) [35002.586344] Freezing user space processes ... (elapsed 0.002 seconds) done. [35002.588357] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [35002.588597] Freezing remaining freezable tasks ... (elapsed 0.102 seconds) done. [35002.690992] PM: Suspending system (mem) [35002.691097] Suspending console(s) (use no_console_suspend to debug) [35002.905760] sd 1:0:0:0: [sda] Synchronizing SCSI cache [35002.905915] sd 1:0:0:0: [sda] Stopping disk [35002.917805] e1000e: EEE TX LPI TIMER: 00000011 [35003.060484] PM: suspend of devices complete after 155.719 msecs [35003.084192] PM: late suspend of devices complete after 23.694 msecs [35003.085366] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [35003.086186] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [35003.124238] PM: noirq suspend of devices complete after 40.033 msecs [35003.125016] ACPI: Preparing to enter system sleep state S3 [35003.452238] ACPI : EC: EC stopped [35003.452240] PM: Saving platform NVS memory [35003.452247] Disabling non-boot CPUs ... [35003.452801] Broke affinity for irq 279 [35003.453958] smpboot: CPU 1 is now offline [35003.469469] Broke affinity for irq 123 [35003.469475] Broke affinity for irq 124 [35003.469525] Broke affinity for irq 279 [35003.469531] Broke affinity for irq 281 [35003.471428] smpboot: CPU 2 is now offline [35003.493224] Broke affinity for irq 1 [35003.493231] Broke affinity for irq 8 [35003.493236] Broke affinity for irq 9 [35003.493240] Broke affinity for irq 12 [35003.493245] Broke affinity for irq 14 [35003.493249] Broke affinity for irq 16 [35003.493253] Broke affinity for irq 17 [35003.493263] Broke affinity for irq 122 [35003.493267] Broke affinity for irq 123 [35003.493270] Broke affinity for irq 124 [35003.493304] Broke affinity for irq 277 [35003.493309] Broke affinity for irq 279 [35003.493313] Broke affinity for irq 281 [35003.494400] smpboot: CPU 3 is now offline [35003.512382] ACPI: Low-level resume complete [35003.512382] ACPI : EC: EC started [35003.512382] PM: Restoring platform NVS memory [35003.512382] Enabling non-boot CPUs ... [35003.536243] x86: Booting SMP configuration: [35003.536243] smpboot: Booting Node 0 Processor 1 APIC 0x2 [35003.537905] cache: parent cpu1 should not be sleeping [35003.538070] CPU1 is up [35003.564444] smpboot: Booting Node 0 Processor 2 APIC 0x1 [35003.565732] cache: parent cpu2 should not be sleeping [35003.566147] CPU2 is up [35003.596484] smpboot: Booting Node 0 Processor 3 APIC 0x3 [35003.597685] cache: parent cpu3 should not be sleeping [35003.598169] CPU3 is up [35003.606549] ACPI: Waking up from system sleep state S3 [35003.792679] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [35003.792850] PM: noirq resume of devices complete after 39.008 msecs [35003.808159] PM: early resume of devices complete after 15.184 msecs [35003.808705] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [35003.809240] sd 1:0:0:0: [sda] Starting disk [35003.812230] rtc_cmos 00:03: System wakeup disabled by ACPI [35003.816471] [drm] GuC firmware load skipped [35003.860070] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [35003.860070] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [35004.120623] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [35004.121188] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35004.121191] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35004.121193] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [35004.121585] ata2.00: supports DRM functions and may not be fully accessible [35004.124145] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35004.124148] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35004.124150] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [35004.124375] ata2.00: supports DRM functions and may not be fully accessible [35004.125316] ata2.00: configured for UDMA/133 [35004.132954] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [35004.392974] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [35004.652937] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [35005.820442] [drm] RC6 on [35007.864943] PM: resume of devices complete after 4056.766 msecs [35007.865320] usb 1-7:1.0: rebind failed: -517 [35007.865326] usb 1-7:1.1: rebind failed: -517 [35007.865849] PM: Finishing wakeup. [35007.865852] Restarting tasks ... [35007.900586] Bluetooth: hci0: read Intel version: 370810011003110e00 [35007.906249] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [35007.912197] done. [35008.096080] usb 1-2.2: new high-speed USB device number 43 using xhci_hcd [35008.199536] usb 1-2.2: New USB device found, idVendor=0951, idProduct=1625 [35008.199541] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [35008.199545] usb 1-2.2: Product: DT101 II [35008.199547] usb 1-2.2: Manufacturer: Kingston [35008.199550] usb 1-2.2: SerialNumber: 001CC0EC3519F04127E4155C [35008.200416] usb-storage 1-2.2:1.0: USB Mass Storage device detected [35008.201949] scsi host2: usb-storage 1-2.2:1.0 [35008.222651] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [35009.212636] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [35009.213027] sd 2:0:0:0: Attached scsi generic sg1 type 0 [35009.213222] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [35009.213373] sd 2:0:0:0: [sdb] Write Protect is off [35009.213376] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [35009.213523] sd 2:0:0:0: [sdb] No Caching mode page found [35009.213526] sd 2:0:0:0: [sdb] Assuming drive cache: write through [35009.215605] sdb: sdb4 [35009.216513] sd 2:0:0:0: [sdb] Attached SCSI removable disk [35009.568417] e1000e: enp0s31f6 NIC Link is Down [35009.569853] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [35009.572090] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [35009.572333] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [35009.637737] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [35009.637950] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [35009.653767] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [35009.655771] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [35009.844430] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [35009.936805] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [35014.588550] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [35014.595351] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [35014.597559] wlp3s0: authenticated [35014.600098] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [35014.603998] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=13) [35014.606954] wlp3s0: associated [35014.607075] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [35015.007756] systemd[1]: snapd.refresh.timer: Adding 1h 56min 46.093485s random time. [35015.222789] systemd[1]: snapd.refresh.timer: Adding 1h 50min 52.802101s random time. [35033.044758] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [35303.088047] usb 1-1: new high-speed USB device number 44 using xhci_hcd [35303.228731] usb 1-1: New USB device found, idVendor=2717, idProduct=ff48 [35303.228733] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [35303.228734] usb 1-1: Product: Android [35303.228736] usb 1-1: Manufacturer: Android [35303.228736] usb 1-1: SerialNumber: 9e87ad037d22 [35578.716862] usb 1-1: USB disconnect, device number 44 [35736.492229] usb 1-1: new high-speed USB device number 45 using xhci_hcd [35736.633709] usb 1-1: New USB device found, idVendor=2717, idProduct=ff48 [35736.633716] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [35736.633721] usb 1-1: Product: Android [35736.633726] usb 1-1: Manufacturer: Android [35736.633730] usb 1-1: SerialNumber: 9e87ad037d22 [36986.469534] usb 1-1: USB disconnect, device number 45 [36992.462457] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [36993.981875] PM: Syncing filesystems ... done. [36994.000962] PM: Preparing system for sleep (mem) [36994.002543] Freezing user space processes ... (elapsed 0.001 seconds) done. [36994.004232] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [36994.004340] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done. [36994.109018] PM: Suspending system (mem) [36994.109142] Suspending console(s) (use no_console_suspend to debug) [36994.325955] sd 1:0:0:0: [sda] Synchronizing SCSI cache [36994.328421] sd 1:0:0:0: [sda] Stopping disk [36994.339067] e1000e: EEE TX LPI TIMER: 00000011 [36995.106260] PM: suspend of devices complete after 781.386 msecs [36995.132528] PM: late suspend of devices complete after 26.256 msecs [36995.133748] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [36995.134572] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [36995.172244] PM: noirq suspend of devices complete after 39.701 msecs [36995.173025] ACPI: Preparing to enter system sleep state S3 [36995.500262] ACPI : EC: EC stopped [36995.500264] PM: Saving platform NVS memory [36995.500274] Disabling non-boot CPUs ... [36995.501078] Broke affinity for irq 279 [36995.503136] smpboot: CPU 1 is now offline [36995.525442] Broke affinity for irq 123 [36995.525448] Broke affinity for irq 124 [36995.525498] Broke affinity for irq 279 [36995.525503] Broke affinity for irq 281 [36995.526715] smpboot: CPU 2 is now offline [36995.553098] Broke affinity for irq 1 [36995.553105] Broke affinity for irq 8 [36995.553109] Broke affinity for irq 9 [36995.553113] Broke affinity for irq 12 [36995.553117] Broke affinity for irq 14 [36995.553122] Broke affinity for irq 16 [36995.553126] Broke affinity for irq 17 [36995.553136] Broke affinity for irq 122 [36995.553140] Broke affinity for irq 123 [36995.553144] Broke affinity for irq 124 [36995.553177] Broke affinity for irq 277 [36995.553183] Broke affinity for irq 279 [36995.553187] Broke affinity for irq 281 [36995.554297] smpboot: CPU 3 is now offline [36995.564401] ACPI: Low-level resume complete [36995.564401] ACPI : EC: EC started [36995.564401] PM: Restoring platform NVS memory [36995.564401] Enabling non-boot CPUs ... [36995.588246] x86: Booting SMP configuration: [36995.588246] smpboot: Booting Node 0 Processor 1 APIC 0x2 [36995.589909] cache: parent cpu1 should not be sleeping [36995.590073] CPU1 is up [36995.616405] smpboot: Booting Node 0 Processor 2 APIC 0x1 [36995.617676] cache: parent cpu2 should not be sleeping [36995.618066] CPU2 is up [36995.644533] smpboot: Booting Node 0 Processor 3 APIC 0x3 [36995.645725] cache: parent cpu3 should not be sleeping [36995.646161] CPU3 is up [36995.654414] ACPI: Waking up from system sleep state S3 [36995.840666] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [36995.840809] PM: noirq resume of devices complete after 38.956 msecs [36995.854408] PM: early resume of devices complete after 13.493 msecs [36995.854992] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [36995.855546] sd 1:0:0:0: [sda] Starting disk [36995.859342] rtc_cmos 00:03: System wakeup disabled by ACPI [36995.861498] [drm] GuC firmware load skipped [36995.904033] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [36995.904033] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [36996.168724] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [36996.169438] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [36996.169441] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [36996.169443] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [36996.170004] ata2.00: supports DRM functions and may not be fully accessible [36996.172343] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [36996.172346] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [36996.172349] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [36996.172891] ata2.00: supports DRM functions and may not be fully accessible [36996.174330] ata2.00: configured for UDMA/133 [36996.176794] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [36996.436834] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [36996.696932] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [36997.788423] [drm] RC6 on [36998.897491] PM: resume of devices complete after 3043.049 msecs [36998.897797] usb 1-7:1.0: rebind failed: -517 [36998.897801] usb 1-7:1.1: rebind failed: -517 [36998.898251] PM: Finishing wakeup. [36998.898253] Restarting tasks ... [36998.924828] Bluetooth: hci0: read Intel version: 370810011003110e00 [36998.924832] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [36998.941397] done. [36999.243993] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [37000.976408] e1000e: enp0s31f6 NIC Link is Down [37000.977190] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [37000.979454] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [37000.979640] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [37001.046846] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [37001.047036] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [37001.070043] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [37001.073585] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [37001.264409] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [37001.362223] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [37006.126600] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [37006.139188] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [37006.141797] wlp3s0: authenticated [37006.144064] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [37006.150209] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=9) [37006.153128] wlp3s0: associated [37006.153236] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [37006.621494] systemd[1]: snapd.refresh.timer: Adding 5h 56min 46.583957s random time. [37006.876178] systemd[1]: snapd.refresh.timer: Adding 1h 31min 10.969275s random time. [41768.786365] usb 1-2.2: USB disconnect, device number 43 [41770.942452] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [41772.460818] PM: Syncing filesystems ... done. [41772.471722] PM: Preparing system for sleep (mem) [41772.472194] Freezing user space processes ... (elapsed 0.002 seconds) done. [41772.474210] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [41772.474453] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [41772.476068] PM: Suspending system (mem) [41772.476148] Suspending console(s) (use no_console_suspend to debug) [41772.693951] sd 1:0:0:0: [sda] Synchronizing SCSI cache [41772.694105] sd 1:0:0:0: [sda] Stopping disk [41772.705959] e1000e: EEE TX LPI TIMER: 00000011 [41773.184533] PM: suspend of devices complete after 491.724 msecs [41773.212531] PM: late suspend of devices complete after 27.983 msecs [41773.213706] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [41773.214622] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [41773.252229] PM: noirq suspend of devices complete after 39.684 msecs [41773.253011] ACPI: Preparing to enter system sleep state S3 [41773.580233] ACPI : EC: EC stopped [41773.580234] PM: Saving platform NVS memory [41773.580242] Disabling non-boot CPUs ... [41773.580806] Broke affinity for irq 279 [41773.581962] smpboot: CPU 1 is now offline [41773.597487] Broke affinity for irq 123 [41773.597494] Broke affinity for irq 124 [41773.597543] Broke affinity for irq 279 [41773.597548] Broke affinity for irq 281 [41773.599442] smpboot: CPU 2 is now offline [41773.625248] Broke affinity for irq 1 [41773.625254] Broke affinity for irq 8 [41773.625258] Broke affinity for irq 9 [41773.625263] Broke affinity for irq 12 [41773.625267] Broke affinity for irq 14 [41773.625271] Broke affinity for irq 16 [41773.625275] Broke affinity for irq 17 [41773.625286] Broke affinity for irq 122 [41773.625289] Broke affinity for irq 123 [41773.625293] Broke affinity for irq 124 [41773.625327] Broke affinity for irq 277 [41773.625332] Broke affinity for irq 279 [41773.625336] Broke affinity for irq 281 [41773.626432] smpboot: CPU 3 is now offline [41773.644379] ACPI: Low-level resume complete [41773.644379] ACPI : EC: EC started [41773.644379] PM: Restoring platform NVS memory [41773.644379] Enabling non-boot CPUs ... [41773.668243] x86: Booting SMP configuration: [41773.668243] smpboot: Booting Node 0 Processor 1 APIC 0x2 [41773.669896] cache: parent cpu1 should not be sleeping [41773.670079] CPU1 is up [41773.696399] smpboot: Booting Node 0 Processor 2 APIC 0x1 [41773.697679] cache: parent cpu2 should not be sleeping [41773.698097] CPU2 is up [41773.724475] smpboot: Booting Node 0 Processor 3 APIC 0x3 [41773.725564] cache: parent cpu3 should not be sleeping [41773.726008] CPU3 is up [41773.734245] ACPI: Waking up from system sleep state S3 [41773.920687] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [41773.920811] PM: noirq resume of devices complete after 38.963 msecs [41773.937078] PM: early resume of devices complete after 16.144 msecs [41773.937653] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [41773.938669] sd 1:0:0:0: [sda] Starting disk [41773.942752] rtc_cmos 00:03: System wakeup disabled by ACPI [41773.944318] [drm] GuC firmware load skipped [41773.988149] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [41773.988149] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [41774.248807] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [41774.249277] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [41774.249281] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [41774.249284] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [41774.249527] ata2.00: supports DRM functions and may not be fully accessible [41774.251241] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [41774.251244] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [41774.251246] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [41774.251478] ata2.00: supports DRM functions and may not be fully accessible [41774.252456] ata2.00: configured for UDMA/133 [41774.260311] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [41774.520988] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [41774.781007] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [41775.804464] [drm] RC6 on [41775.977600] PM: resume of devices complete after 2040.512 msecs [41775.977875] usb 1-7:1.0: rebind failed: -517 [41775.977880] usb 1-7:1.1: rebind failed: -517 [41775.978284] PM: Finishing wakeup. [41775.978286] Restarting tasks ... done. [41776.011412] Bluetooth: hci0: read Intel version: 370810011003110e00 [41776.011462] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [41776.330618] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [41777.852680] e1000e: enp0s31f6 NIC Link is Down [41777.853600] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41777.855876] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [41777.856169] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [41777.923888] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [41777.924195] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [41777.941875] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41777.945868] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [41778.136506] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [41778.231870] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41782.857408] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [41782.860200] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [41782.862516] wlp3s0: authenticated [41782.867827] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [41782.871846] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=9) [41782.874837] wlp3s0: associated [41782.874880] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [41783.305149] systemd[1]: snapd.refresh.timer: Adding 1h 9min 4.145679s random time. [41783.556260] systemd[1]: snapd.refresh.timer: Adding 5h 15min 366.596ms random time. [41900.456103] usb 1-2.1: new high-speed USB device number 46 using xhci_hcd [41900.560407] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [41900.560415] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [41900.560420] usb 1-2.1: Product: DT101 II [41900.560424] usb 1-2.1: Manufacturer: Kingston [41900.560428] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [41900.561694] usb-storage 1-2.1:1.0: USB Mass Storage device detected [41900.562105] scsi host2: usb-storage 1-2.1:1.0 [41901.565666] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [41901.566894] sd 2:0:0:0: Attached scsi generic sg1 type 0 [41901.567020] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [41901.567276] sd 2:0:0:0: [sdb] Write Protect is off [41901.567286] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [41901.567516] sd 2:0:0:0: [sdb] No Caching mode page found [41901.567532] sd 2:0:0:0: [sdb] Assuming drive cache: write through [41901.570124] sdb: sdb4 [41901.571796] sd 2:0:0:0: [sdb] Attached SCSI removable disk [41901.969165] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [41918.579792] usb 1-2.1: USB disconnect, device number 46 [42178.340040] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [42179.906375] PM: Syncing filesystems ... done. [42179.910909] PM: Preparing system for sleep (mem) [42179.911362] Freezing user space processes ... (elapsed 0.002 seconds) done. [42179.913445] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [42179.913551] Freezing remaining freezable tasks ... (elapsed 0.094 seconds) done. [42180.008431] PM: Suspending system (mem) [42180.008558] Suspending console(s) (use no_console_suspend to debug) [42180.225989] sd 1:0:0:0: [sda] Synchronizing SCSI cache [42180.227592] sd 1:0:0:0: [sda] Stopping disk [42180.238381] e1000e: EEE TX LPI TIMER: 00000011 [42180.380560] PM: suspend of devices complete after 155.688 msecs [42180.408545] PM: late suspend of devices complete after 27.970 msecs [42180.409999] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [42180.410863] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [42180.448234] PM: noirq suspend of devices complete after 39.674 msecs [42180.449013] ACPI: Preparing to enter system sleep state S3 [42180.776230] ACPI : EC: EC stopped [42180.776232] PM: Saving platform NVS memory [42180.776240] Disabling non-boot CPUs ... [42180.776796] Broke affinity for irq 279 [42180.777933] smpboot: CPU 1 is now offline [42180.793471] Broke affinity for irq 123 [42180.793477] Broke affinity for irq 124 [42180.793526] Broke affinity for irq 279 [42180.793530] Broke affinity for irq 281 [42180.795416] smpboot: CPU 2 is now offline [42180.821222] Broke affinity for irq 1 [42180.821228] Broke affinity for irq 8 [42180.821232] Broke affinity for irq 9 [42180.821237] Broke affinity for irq 12 [42180.821241] Broke affinity for irq 14 [42180.821245] Broke affinity for irq 16 [42180.821249] Broke affinity for irq 17 [42180.821259] Broke affinity for irq 122 [42180.821263] Broke affinity for irq 123 [42180.821267] Broke affinity for irq 124 [42180.821299] Broke affinity for irq 277 [42180.821304] Broke affinity for irq 279 [42180.821308] Broke affinity for irq 281 [42180.822403] smpboot: CPU 3 is now offline [42180.840712] ACPI: Low-level resume complete [42180.840712] ACPI : EC: EC started [42180.840712] PM: Restoring platform NVS memory [42180.840712] Enabling non-boot CPUs ... [42180.864245] x86: Booting SMP configuration: [42180.864245] smpboot: Booting Node 0 Processor 1 APIC 0x2 [42180.865908] cache: parent cpu1 should not be sleeping [42180.866075] CPU1 is up [42180.892453] smpboot: Booting Node 0 Processor 2 APIC 0x1 [42180.893640] cache: parent cpu2 should not be sleeping [42180.894054] CPU2 is up [42180.920481] smpboot: Booting Node 0 Processor 3 APIC 0x3 [42180.921747] cache: parent cpu3 should not be sleeping [42180.922201] CPU3 is up [42180.930384] ACPI: Waking up from system sleep state S3 [42181.116683] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [42181.116842] PM: noirq resume of devices complete after 39.009 msecs [42181.132057] PM: early resume of devices complete after 15.048 msecs [42181.132598] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [42181.133705] sd 1:0:0:0: [sda] Starting disk [42181.139123] [drm] GuC firmware load skipped [42181.139440] rtc_cmos 00:03: System wakeup disabled by ACPI [42181.188071] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [42181.188071] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [42181.444704] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [42181.445144] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [42181.445146] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [42181.445147] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [42181.445410] ata2.00: supports DRM functions and may not be fully accessible [42181.447064] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [42181.447065] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [42181.447066] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [42181.447291] ata2.00: supports DRM functions and may not be fully accessible [42181.448206] ata2.00: configured for UDMA/133 [42181.460498] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [42181.720946] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [42181.980923] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [42182.150102] PM: resume of devices complete after 1018.027 msecs [42182.150394] usb 1-7:1.0: rebind failed: -517 [42182.150399] usb 1-7:1.1: rebind failed: -517 [42182.150808] PM: Finishing wakeup. [42182.150810] Restarting tasks ... [42182.174554] Bluetooth: hci0: read Intel version: 370810011003110e00 [42182.174558] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [42182.184865] done. [42182.489800] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [42182.780723] [drm] RC6 on [42183.880193] e1000e: enp0s31f6 NIC Link is Down [42183.881579] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [42183.883741] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [42183.883927] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [42183.950809] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [42183.950999] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [42183.970632] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [42183.973073] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [42184.164384] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [42184.271024] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [42188.853153] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [42188.864004] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [42188.875598] wlp3s0: authenticated [42188.880064] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [42188.884938] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=9) [42188.888861] wlp3s0: associated [42188.888956] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [43636.817147] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [43637.627244] PM: Syncing filesystems ... done. [43637.637549] PM: Preparing system for sleep (mem) [43637.640150] Freezing user space processes ... (elapsed 0.002 seconds) done. [43637.642238] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [43637.642355] Freezing remaining freezable tasks ... (elapsed 0.038 seconds) done. [43637.681191] PM: Suspending system (mem) [43637.681229] Suspending console(s) (use no_console_suspend to debug) [43637.898704] sd 1:0:0:0: [sda] Synchronizing SCSI cache [43637.898858] sd 1:0:0:0: [sda] Stopping disk [43637.910938] e1000e: EEE TX LPI TIMER: 00000011 [43638.444542] PM: suspend of devices complete after 547.800 msecs [43638.468575] PM: late suspend of devices complete after 24.017 msecs [43638.470048] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [43638.470970] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [43638.508266] PM: noirq suspend of devices complete after 39.678 msecs [43638.509045] ACPI: Preparing to enter system sleep state S3 [43638.836203] ACPI : EC: EC stopped [43638.836204] PM: Saving platform NVS memory [43638.836212] Disabling non-boot CPUs ... [43638.836916] Broke affinity for irq 279 [43638.838055] smpboot: CPU 1 is now offline [43638.853496] Broke affinity for irq 123 [43638.853502] Broke affinity for irq 124 [43638.853552] Broke affinity for irq 279 [43638.853557] Broke affinity for irq 281 [43638.855458] smpboot: CPU 2 is now offline [43638.885189] Broke affinity for irq 1 [43638.885196] Broke affinity for irq 8 [43638.885201] Broke affinity for irq 9 [43638.885205] Broke affinity for irq 12 [43638.885209] Broke affinity for irq 14 [43638.885214] Broke affinity for irq 16 [43638.885218] Broke affinity for irq 17 [43638.885228] Broke affinity for irq 122 [43638.885232] Broke affinity for irq 123 [43638.885235] Broke affinity for irq 124 [43638.885269] Broke affinity for irq 277 [43638.885273] Broke affinity for irq 279 [43638.885278] Broke affinity for irq 281 [43638.886371] smpboot: CPU 3 is now offline [43638.904369] ACPI: Low-level resume complete [43638.904369] ACPI : EC: EC started [43638.904369] PM: Restoring platform NVS memory [43638.904369] Enabling non-boot CPUs ... [43638.928238] x86: Booting SMP configuration: [43638.928239] smpboot: Booting Node 0 Processor 1 APIC 0x2 [43638.929900] cache: parent cpu1 should not be sleeping [43638.930063] CPU1 is up [43638.972393] smpboot: Booting Node 0 Processor 2 APIC 0x1 [43638.973648] cache: parent cpu2 should not be sleeping [43638.974073] CPU2 is up [43639.000467] smpboot: Booting Node 0 Processor 3 APIC 0x3 [43639.001578] cache: parent cpu3 should not be sleeping [43639.002070] CPU3 is up [43639.010301] ACPI: Waking up from system sleep state S3 [43639.196680] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [43639.196824] PM: noirq resume of devices complete after 38.989 msecs [43639.214654] PM: early resume of devices complete after 17.706 msecs [43639.215257] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [43639.215788] sd 1:0:0:0: [sda] Starting disk [43639.219963] rtc_cmos 00:03: System wakeup disabled by ACPI [43639.224413] [drm] GuC firmware load skipped [43639.264036] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [43639.264036] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [43639.264036] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [43639.528427] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [43639.528991] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [43639.528994] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [43639.528997] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [43639.529369] ata2.00: supports DRM functions and may not be fully accessible [43639.531563] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [43639.531568] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [43639.531571] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [43639.531904] ata2.00: supports DRM functions and may not be fully accessible [43639.532996] ata2.00: configured for UDMA/133 [43639.552358] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [43639.812870] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [43640.072282] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [43640.828430] [drm] RC6 on [43641.253373] PM: resume of devices complete after 2038.706 msecs [43641.253681] usb 1-7:1.0: rebind failed: -517 [43641.253685] usb 1-7:1.1: rebind failed: -517 [43641.254124] PM: Finishing wakeup. [43641.254126] Restarting tasks ... [43641.289084] Bluetooth: hci0: read Intel version: 370810011003110e00 [43641.297875] done. [43641.297927] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [43641.617979] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [43643.228669] e1000e: enp0s31f6 NIC Link is Down [43643.230361] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [43643.232304] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [43643.232541] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [43643.299631] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [43643.299824] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [43643.322693] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [43643.326461] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [43643.516534] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [43643.605905] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [43648.246913] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [43648.251941] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [43648.255056] wlp3s0: authenticated [43648.256040] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [43648.260745] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=15) [43648.264301] wlp3s0: associated [43648.264349] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [43648.675682] systemd[1]: snapd.refresh.timer: Adding 4h 41.046552s random time. [43648.898125] systemd[1]: snapd.refresh.timer: Adding 1h 59min 9.423823s random time. [44180.970838] perf: interrupt took too long (4133 > 4111), lowering kernel.perf_event_max_sample_rate to 48250 [44874.224106] usb 1-2.1: new high-speed USB device number 47 using xhci_hcd [44874.332377] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [44874.332384] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [44874.332388] usb 1-2.1: Product: DT101 II [44874.332391] usb 1-2.1: Manufacturer: Kingston [44874.332394] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [44874.333886] usb-storage 1-2.1:1.0: USB Mass Storage device detected [44874.334719] scsi host2: usb-storage 1-2.1:1.0 [44875.356898] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [44875.358074] sd 2:0:0:0: Attached scsi generic sg1 type 0 [44875.358239] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [44875.358433] sd 2:0:0:0: [sdb] Write Protect is off [44875.358440] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [44875.358624] sd 2:0:0:0: [sdb] No Caching mode page found [44875.358637] sd 2:0:0:0: [sdb] Assuming drive cache: write through [44875.360846] sdb: sdb4 [44875.362154] sd 2:0:0:0: [sdb] Attached SCSI removable disk [44875.755908] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [44900.779293] usb 1-2.1: USB disconnect, device number 47 [44902.778269] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [44904.455151] PM: Syncing filesystems ... done. [44904.463223] PM: Preparing system for sleep (mem) [44904.463602] Freezing user space processes ... (elapsed 0.066 seconds) done. [44904.530162] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [44904.530404] Freezing remaining freezable tasks ... (elapsed 0.041 seconds) done. [44904.572295] PM: Suspending system (mem) [44904.572360] Suspending console(s) (use no_console_suspend to debug) [44904.789549] sd 1:0:0:0: [sda] Synchronizing SCSI cache [44904.791065] sd 1:0:0:0: [sda] Stopping disk [44904.801469] e1000e: EEE TX LPI TIMER: 00000011 [44905.375342] PM: suspend of devices complete after 586.859 msecs [44905.400185] PM: late suspend of devices complete after 24.828 msecs [44905.401497] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [44905.402307] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [44905.440235] PM: noirq suspend of devices complete after 40.037 msecs [44905.441023] ACPI: Preparing to enter system sleep state S3 [44905.768233] ACPI : EC: EC stopped [44905.768234] PM: Saving platform NVS memory [44905.768242] Disabling non-boot CPUs ... [44905.768945] Broke affinity for irq 279 [44905.770099] smpboot: CPU 1 is now offline [44905.785496] Broke affinity for irq 123 [44905.785502] Broke affinity for irq 124 [44905.785552] Broke affinity for irq 279 [44905.785557] Broke affinity for irq 281 [44905.787467] smpboot: CPU 2 is now offline [44905.813235] Broke affinity for irq 1 [44905.813241] Broke affinity for irq 8 [44905.813245] Broke affinity for irq 9 [44905.813250] Broke affinity for irq 12 [44905.813255] Broke affinity for irq 14 [44905.813259] Broke affinity for irq 16 [44905.813263] Broke affinity for irq 17 [44905.813274] Broke affinity for irq 122 [44905.813278] Broke affinity for irq 123 [44905.813282] Broke affinity for irq 124 [44905.813315] Broke affinity for irq 277 [44905.813320] Broke affinity for irq 279 [44905.813324] Broke affinity for irq 281 [44905.814417] smpboot: CPU 3 is now offline [44905.832737] ACPI: Low-level resume complete [44905.832737] ACPI : EC: EC started [44905.832737] PM: Restoring platform NVS memory [44905.832737] Enabling non-boot CPUs ... [44905.856251] x86: Booting SMP configuration: [44905.856251] smpboot: Booting Node 0 Processor 1 APIC 0x2 [44905.857919] cache: parent cpu1 should not be sleeping [44905.858085] CPU1 is up [44905.884406] smpboot: Booting Node 0 Processor 2 APIC 0x1 [44905.885670] cache: parent cpu2 should not be sleeping [44905.886089] CPU2 is up [44905.916484] smpboot: Booting Node 0 Processor 3 APIC 0x3 [44905.917567] cache: parent cpu3 should not be sleeping [44905.918043] CPU3 is up [44905.926304] ACPI: Waking up from system sleep state S3 [44906.112675] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [44906.112841] PM: noirq resume of devices complete after 39.006 msecs [44906.128243] PM: early resume of devices complete after 15.279 msecs [44906.128900] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [44906.129580] sd 1:0:0:0: [sda] Starting disk [44906.134731] rtc_cmos 00:03: System wakeup disabled by ACPI [44906.135600] [drm] GuC firmware load skipped [44906.180346] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [44906.180346] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [44906.180346] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [44906.440589] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [44906.441162] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [44906.441165] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [44906.441166] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [44906.441570] ata2.00: supports DRM functions and may not be fully accessible [44906.444226] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [44906.444229] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [44906.444231] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [44906.444621] ata2.00: supports DRM functions and may not be fully accessible [44906.445886] ata2.00: configured for UDMA/133 [44906.468368] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [44906.728872] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [44906.988903] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [44907.157987] PM: resume of devices complete after 1029.728 msecs [44907.158398] usb 1-7:1.0: rebind failed: -517 [44907.158402] usb 1-7:1.1: rebind failed: -517 [44907.158812] PM: Finishing wakeup. [44907.158814] Restarting tasks ... done. [44907.188677] Bluetooth: hci0: read Intel version: 370810011003110e00 [44907.188681] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [44907.507942] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [44907.836771] [drm] RC6 on [44908.940263] e1000e: enp0s31f6 NIC Link is Down [44908.943289] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [44908.945682] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [44908.945890] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [44909.011802] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [44909.012058] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [44909.032081] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [44909.033681] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [44909.224710] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [44909.320272] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [44913.675328] wlp3s0: authenticate with 20:dc:e6:39:23:48 [44913.677701] wlp3s0: send auth to 20:dc:e6:39:23:48 (try 1/3) [44913.688286] wlp3s0: authenticated [44913.692121] wlp3s0: associate with 20:dc:e6:39:23:48 (try 1/3) [44913.702075] wlp3s0: RX AssocResp from 20:dc:e6:39:23:48 (capab=0x31 status=0 aid=3) [44913.705037] wlp3s0: associated [44913.705076] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [44914.648616] systemd[1]: snapd.refresh.timer: Adding 2h 7min 47.685749s random time. [44915.184934] systemd[1]: snapd.refresh.timer: Adding 1h 41min 8.469407s random time. [45060.403877] wlp3s0: deauthenticating from 20:dc:e6:39:23:48 by local choice (Reason: 3=DEAUTH_LEAVING) [45062.173655] PM: Syncing filesystems ... done. [45062.184969] PM: Preparing system for sleep (mem) [45062.185711] Freezing user space processes ... (elapsed 0.002 seconds) done. [45062.187780] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [45062.187907] Freezing remaining freezable tasks ... (elapsed 0.036 seconds) done. [45062.224603] PM: Suspending system (mem) [45062.224640] Suspending console(s) (use no_console_suspend to debug) [45062.442188] sd 1:0:0:0: [sda] Synchronizing SCSI cache [45062.442347] sd 1:0:0:0: [sda] Stopping disk [45062.454735] e1000e: EEE TX LPI TIMER: 00000011 [45062.785374] PM: suspend of devices complete after 344.420 msecs [45062.808733] PM: late suspend of devices complete after 23.339 msecs [45062.810517] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [45062.811543] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [45062.848293] PM: noirq suspend of devices complete after 39.544 msecs [45062.849332] ACPI: Preparing to enter system sleep state S3 [45063.176270] ACPI : EC: EC stopped [45063.176272] PM: Saving platform NVS memory [45063.176282] Disabling non-boot CPUs ... [45063.177133] Broke affinity for irq 279 [45063.179373] smpboot: CPU 1 is now offline [45063.201887] Broke affinity for irq 123 [45063.201895] Broke affinity for irq 124 [45063.201958] Broke affinity for irq 279 [45063.201966] Broke affinity for irq 281 [45063.203135] smpboot: CPU 2 is now offline [45063.225104] Broke affinity for irq 1 [45063.225111] Broke affinity for irq 8 [45063.225115] Broke affinity for irq 9 [45063.225120] Broke affinity for irq 12 [45063.225124] Broke affinity for irq 14 [45063.225128] Broke affinity for irq 16 [45063.225132] Broke affinity for irq 17 [45063.225143] Broke affinity for irq 122 [45063.225146] Broke affinity for irq 123 [45063.225150] Broke affinity for irq 124 [45063.225183] Broke affinity for irq 277 [45063.225189] Broke affinity for irq 279 [45063.225193] Broke affinity for irq 281 [45063.226304] smpboot: CPU 3 is now offline [45063.236417] ACPI: Low-level resume complete [45063.236417] ACPI : EC: EC started [45063.236417] PM: Restoring platform NVS memory [45063.236417] Enabling non-boot CPUs ... [45063.260244] x86: Booting SMP configuration: [45063.260244] smpboot: Booting Node 0 Processor 1 APIC 0x2 [45063.261924] cache: parent cpu1 should not be sleeping [45063.262090] CPU1 is up [45063.312401] smpboot: Booting Node 0 Processor 2 APIC 0x1 [45063.313707] cache: parent cpu2 should not be sleeping [45063.314124] CPU2 is up [45063.336473] smpboot: Booting Node 0 Processor 3 APIC 0x3 [45063.337697] cache: parent cpu3 should not be sleeping [45063.338144] CPU3 is up [45063.346348] ACPI: Waking up from system sleep state S3 [45063.532655] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [45063.532808] PM: noirq resume of devices complete after 38.943 msecs [45063.546598] PM: early resume of devices complete after 13.667 msecs [45063.547130] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [45063.547630] sd 1:0:0:0: [sda] Starting disk [45063.550716] rtc_cmos 00:03: System wakeup disabled by ACPI [45063.554937] [drm] GuC firmware load skipped [45063.596031] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [45063.596031] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [45063.596031] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [45063.862978] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [45063.863625] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [45063.863630] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [45063.863633] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [45063.863949] ata2.00: supports DRM functions and may not be fully accessible [45063.866595] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [45063.866600] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [45063.866603] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [45063.866985] ata2.00: supports DRM functions and may not be fully accessible [45063.868405] ata2.00: configured for UDMA/133 [45063.884898] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [45064.144987] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [45064.404930] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [45064.828390] [drm] RC6 on [45065.573719] PM: resume of devices complete after 2027.106 msecs [45065.574004] usb 1-7:1.0: rebind failed: -517 [45065.574009] usb 1-7:1.1: rebind failed: -517 [45065.574416] PM: Finishing wakeup. [45065.574418] Restarting tasks ... [45065.602095] Bluetooth: hci0: read Intel version: 370810011003110e00 [45065.613206] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [45065.613308] done. [45065.930193] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [45067.327829] e1000e: enp0s31f6 NIC Link is Down [45067.328774] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [45067.330216] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [45067.330401] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [45067.396190] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [45067.396410] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [45067.415869] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [45067.420279] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [45067.612598] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [45067.714123] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [45072.174721] wlp3s0: authenticate with 20:dc:e6:39:23:48 [45072.181073] wlp3s0: send auth to 20:dc:e6:39:23:48 (try 1/3) [45072.188278] wlp3s0: authenticated [45072.192037] wlp3s0: associate with 20:dc:e6:39:23:48 (try 1/3) [45072.218723] wlp3s0: RX AssocResp from 20:dc:e6:39:23:48 (capab=0x31 status=0 aid=3) [45072.233518] wlp3s0: associated [45072.233558] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [45072.761859] systemd[1]: snapd.refresh.timer: Adding 3h 27min 22.414828s random time. [45077.986583] systemd[1]: snapd.refresh.timer: Adding 4h 37min 39.568557s random time. [45729.409199] wlp3s0: deauthenticating from 20:dc:e6:39:23:48 by local choice (Reason: 3=DEAUTH_LEAVING) [45731.152593] PM: Syncing filesystems ... done. [45731.162336] PM: Preparing system for sleep (mem) [45731.162710] Freezing user space processes ... (elapsed 0.001 seconds) done. [45731.164285] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [45731.164400] Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done. [45731.172306] PM: Suspending system (mem) [45731.172338] Suspending console(s) (use no_console_suspend to debug) [45731.389896] sd 1:0:0:0: [sda] Synchronizing SCSI cache [45731.391472] sd 1:0:0:0: [sda] Stopping disk [45731.403426] e1000e: EEE TX LPI TIMER: 00000011 [45731.722306] PM: suspend of devices complete after 333.502 msecs [45731.744200] PM: late suspend of devices complete after 21.882 msecs [45731.745339] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [45731.746124] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [45731.784252] PM: noirq suspend of devices complete after 40.038 msecs [45731.785030] ACPI: Preparing to enter system sleep state S3 [45732.112232] ACPI : EC: EC stopped [45732.112234] PM: Saving platform NVS memory [45732.112241] Disabling non-boot CPUs ... [45732.112791] Broke affinity for irq 279 [45732.113946] smpboot: CPU 1 is now offline [45732.137496] Broke affinity for irq 123 [45732.137503] Broke affinity for irq 124 [45732.137552] Broke affinity for irq 279 [45732.137557] Broke affinity for irq 281 [45732.139444] smpboot: CPU 2 is now offline [45732.161243] Broke affinity for irq 1 [45732.161249] Broke affinity for irq 8 [45732.161253] Broke affinity for irq 9 [45732.161258] Broke affinity for irq 12 [45732.161262] Broke affinity for irq 14 [45732.161266] Broke affinity for irq 16 [45732.161270] Broke affinity for irq 17 [45732.161281] Broke affinity for irq 122 [45732.161285] Broke affinity for irq 123 [45732.161288] Broke affinity for irq 124 [45732.161322] Broke affinity for irq 277 [45732.161327] Broke affinity for irq 279 [45732.161331] Broke affinity for irq 281 [45732.162426] smpboot: CPU 3 is now offline [45732.180374] ACPI: Low-level resume complete [45732.180374] ACPI : EC: EC started [45732.180374] PM: Restoring platform NVS memory [45732.180374] Enabling non-boot CPUs ... [45732.204243] x86: Booting SMP configuration: [45732.204244] smpboot: Booting Node 0 Processor 1 APIC 0x2 [45732.205907] cache: parent cpu1 should not be sleeping [45732.206072] CPU1 is up [45732.232373] smpboot: Booting Node 0 Processor 2 APIC 0x1 [45732.233546] cache: parent cpu2 should not be sleeping [45732.233926] CPU2 is up [45732.264482] smpboot: Booting Node 0 Processor 3 APIC 0x3 [45732.265568] cache: parent cpu3 should not be sleeping [45732.266055] CPU3 is up [45732.274306] ACPI: Waking up from system sleep state S3 [45732.460668] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [45732.460822] PM: noirq resume of devices complete after 38.967 msecs [45732.478509] PM: early resume of devices complete after 17.568 msecs [45732.479086] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [45732.479980] sd 1:0:0:0: [sda] Starting disk [45732.481706] rtc_cmos 00:03: System wakeup disabled by ACPI [45732.486046] [drm] GuC firmware load skipped [45732.528067] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [45732.528067] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [45732.528067] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [45732.793690] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [45732.794304] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [45732.794309] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [45732.794312] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [45732.794678] ata2.00: supports DRM functions and may not be fully accessible [45732.797027] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [45732.797032] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [45732.797035] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [45732.797542] ata2.00: supports DRM functions and may not be fully accessible [45732.798776] ata2.00: configured for UDMA/133 [45732.820995] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [45733.080951] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [45733.340885] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [45733.820379] [drm] RC6 on [45734.501876] PM: resume of devices complete after 2023.351 msecs [45734.502151] usb 1-7:1.0: rebind failed: -517 [45734.502156] usb 1-7:1.1: rebind failed: -517 [45734.502564] PM: Finishing wakeup. [45734.502566] Restarting tasks ... done. [45734.533964] Bluetooth: hci0: read Intel version: 370810011003110e00 [45734.533968] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [45734.854056] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [45736.267518] e1000e: enp0s31f6 NIC Link is Down [45736.268512] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [45736.270785] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [45736.271036] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [45736.338291] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [45736.338546] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [45736.359957] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [45736.362319] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [45736.552602] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [45736.683078] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [45741.133047] wlp3s0: authenticate with 20:dc:e6:39:23:48 [45741.135617] wlp3s0: send auth to 20:dc:e6:39:23:48 (try 1/3) [45741.139849] wlp3s0: authenticated [45741.144056] wlp3s0: associate with 20:dc:e6:39:23:48 (try 1/3) [45741.154946] wlp3s0: RX AssocResp from 20:dc:e6:39:23:48 (capab=0x31 status=0 aid=3) [45741.156812] wlp3s0: associated [45741.156861] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [45741.628847] systemd[1]: snapd.refresh.timer: Adding 4h 21min 34.540587s random time. [45741.861958] systemd[1]: snapd.refresh.timer: Adding 5h 7min 5.752351s random time. [48171.104901] wlp3s0: deauthenticating from 20:dc:e6:39:23:48 by local choice (Reason: 3=DEAUTH_LEAVING) [48172.839343] PM: Syncing filesystems ... done. [48172.845028] PM: Preparing system for sleep (mem) [48172.845408] Freezing user space processes ... (elapsed 0.001 seconds) done. [48172.847281] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [48172.847389] Freezing remaining freezable tasks ... (elapsed 0.085 seconds) done. [48172.932886] PM: Suspending system (mem) [48172.932937] Suspending console(s) (use no_console_suspend to debug) [48173.149673] sd 1:0:0:0: [sda] Synchronizing SCSI cache [48173.150065] sd 1:0:0:0: [sda] Stopping disk [48173.162148] e1000e: EEE TX LPI TIMER: 00000011 [48173.304389] PM: suspend of devices complete after 155.631 msecs [48173.332562] PM: late suspend of devices complete after 28.157 msecs [48173.333901] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [48173.334728] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [48173.372235] PM: noirq suspend of devices complete after 39.659 msecs [48173.373014] ACPI: Preparing to enter system sleep state S3 [48173.700247] ACPI : EC: EC stopped [48173.700248] PM: Saving platform NVS memory [48173.700256] Disabling non-boot CPUs ... [48173.700808] Broke affinity for irq 279 [48173.701965] smpboot: CPU 1 is now offline [48173.717476] Broke affinity for irq 123 [48173.717482] Broke affinity for irq 124 [48173.717532] Broke affinity for irq 279 [48173.717536] Broke affinity for irq 281 [48173.719424] smpboot: CPU 2 is now offline [48173.741229] Broke affinity for irq 1 [48173.741236] Broke affinity for irq 8 [48173.741240] Broke affinity for irq 9 [48173.741245] Broke affinity for irq 12 [48173.741249] Broke affinity for irq 14 [48173.741253] Broke affinity for irq 16 [48173.741257] Broke affinity for irq 17 [48173.741268] Broke affinity for irq 122 [48173.741271] Broke affinity for irq 123 [48173.741275] Broke affinity for irq 124 [48173.741308] Broke affinity for irq 277 [48173.741313] Broke affinity for irq 279 [48173.741317] Broke affinity for irq 281 [48173.742410] smpboot: CPU 3 is now offline [48173.760377] ACPI: Low-level resume complete [48173.760377] ACPI : EC: EC started [48173.760377] PM: Restoring platform NVS memory [48173.760377] Enabling non-boot CPUs ... [48173.784241] x86: Booting SMP configuration: [48173.784241] smpboot: Booting Node 0 Processor 1 APIC 0x2 [48173.785909] cache: parent cpu1 should not be sleeping [48173.786077] CPU1 is up [48173.812366] smpboot: Booting Node 0 Processor 2 APIC 0x1 [48173.813547] cache: parent cpu2 should not be sleeping [48173.813923] CPU2 is up [48173.856472] smpboot: Booting Node 0 Processor 3 APIC 0x3 [48173.857551] cache: parent cpu3 should not be sleeping [48173.857989] CPU3 is up [48173.866162] ACPI: Waking up from system sleep state S3 [48174.052693] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [48174.052841] PM: noirq resume of devices complete after 38.967 msecs [48174.067951] PM: early resume of devices complete after 14.985 msecs [48174.068543] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [48174.069834] sd 1:0:0:0: [sda] Starting disk [48174.072784] rtc_cmos 00:03: System wakeup disabled by ACPI [48174.075835] [drm] GuC firmware load skipped [48174.120080] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [48174.120080] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [48174.120080] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [48174.381788] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [48174.382425] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [48174.382430] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [48174.382433] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [48174.382832] ata2.00: supports DRM functions and may not be fully accessible [48174.385046] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [48174.385050] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [48174.385053] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [48174.385270] ata2.00: supports DRM functions and may not be fully accessible [48174.386204] ata2.00: configured for UDMA/133 [48174.408981] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [48174.668942] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [48174.928992] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [48175.836703] [drm] RC6 on [48176.088856] PM: resume of devices complete after 2020.889 msecs [48176.089146] usb 1-7:1.0: rebind failed: -517 [48176.089151] usb 1-7:1.1: rebind failed: -517 [48176.089592] PM: Finishing wakeup. [48176.089594] Restarting tasks ... done. [48176.119440] Bluetooth: hci0: read Intel version: 370810011003110e00 [48176.119638] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [48176.436558] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [48177.676666] e1000e: enp0s31f6 NIC Link is Down [48177.677943] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [48177.680120] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [48177.680372] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [48177.745839] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [48177.746041] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [48177.765567] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [48177.768239] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [48177.960435] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [48178.063122] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [48182.660994] wlp3s0: authenticate with 20:dc:e6:39:23:48 [48182.678487] wlp3s0: send auth to 20:dc:e6:39:23:48 (try 1/3) [48182.680716] wlp3s0: authenticated [48182.688077] wlp3s0: associate with 20:dc:e6:39:23:48 (try 1/3) [48182.690880] wlp3s0: RX AssocResp from 20:dc:e6:39:23:48 (capab=0x31 status=0 aid=3) [48182.692445] wlp3s0: associated [48182.692568] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [48183.143869] systemd[1]: snapd.refresh.timer: Adding 4min 29.567561s random time. [48183.371397] systemd[1]: snapd.refresh.timer: Adding 5h 34min 28.222607s random time. [48202.967458] wlp3s0: deauthenticating from 20:dc:e6:39:23:48 by local choice (Reason: 3=DEAUTH_LEAVING) [48203.237068] PM: Syncing filesystems ... done. [48203.253472] PM: Preparing system for sleep (mem) [48203.253874] Freezing user space processes ... (elapsed 0.088 seconds) done. [48203.342638] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [48203.343015] Freezing remaining freezable tasks ... (elapsed 0.110 seconds) done. [48203.453164] PM: Suspending system (mem) [48203.453292] Suspending console(s) (use no_console_suspend to debug) [48203.670984] sd 1:0:0:0: [sda] Synchronizing SCSI cache [48203.672533] sd 1:0:0:0: [sda] Stopping disk [48203.684063] e1000e: EEE TX LPI TIMER: 00000011 [48203.918555] PM: suspend of devices complete after 249.604 msecs [48203.944188] PM: late suspend of devices complete after 25.619 msecs [48203.945378] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [48203.946267] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [48203.984258] PM: noirq suspend of devices complete after 40.057 msecs [48203.985036] ACPI: Preparing to enter system sleep state S3 [48204.312237] ACPI : EC: EC stopped [48204.312238] PM: Saving platform NVS memory [48204.312246] Disabling non-boot CPUs ... [48204.312792] Broke affinity for irq 279 [48204.313944] smpboot: CPU 1 is now offline [48204.329468] Broke affinity for irq 123 [48204.329474] Broke affinity for irq 124 [48204.329523] Broke affinity for irq 279 [48204.329528] Broke affinity for irq 281 [48204.331417] smpboot: CPU 2 is now offline [48204.353225] Broke affinity for irq 1 [48204.353231] Broke affinity for irq 8 [48204.353235] Broke affinity for irq 9 [48204.353240] Broke affinity for irq 12 [48204.353244] Broke affinity for irq 14 [48204.353248] Broke affinity for irq 16 [48204.353253] Broke affinity for irq 17 [48204.353264] Broke affinity for irq 122 [48204.353268] Broke affinity for irq 123 [48204.353272] Broke affinity for irq 124 [48204.353305] Broke affinity for irq 277 [48204.353310] Broke affinity for irq 279 [48204.353314] Broke affinity for irq 281 [48204.354410] smpboot: CPU 3 is now offline [48204.372376] ACPI: Low-level resume complete [48204.372376] ACPI : EC: EC started [48204.372376] PM: Restoring platform NVS memory [48204.372376] Enabling non-boot CPUs ... [48204.396239] x86: Booting SMP configuration: [48204.396240] smpboot: Booting Node 0 Processor 1 APIC 0x2 [48204.397920] cache: parent cpu1 should not be sleeping [48204.398085] CPU1 is up [48204.424368] smpboot: Booting Node 0 Processor 2 APIC 0x1 [48204.425550] cache: parent cpu2 should not be sleeping [48204.425928] CPU2 is up [48204.468470] smpboot: Booting Node 0 Processor 3 APIC 0x3 [48204.469726] cache: parent cpu3 should not be sleeping [48204.470218] CPU3 is up [48204.478606] ACPI: Waking up from system sleep state S3 [48204.664685] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [48204.664843] PM: noirq resume of devices complete after 38.979 msecs [48204.678883] PM: early resume of devices complete after 13.918 msecs [48204.679305] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [48204.680208] sd 1:0:0:0: [sda] Starting disk [48204.682158] rtc_cmos 00:03: System wakeup disabled by ACPI [48204.685213] [drm] GuC firmware load skipped [48204.728063] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [48204.728063] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [48204.728063] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [48204.995226] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [48204.995843] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [48204.995848] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [48204.995851] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [48204.996219] ata2.00: supports DRM functions and may not be fully accessible [48204.998818] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [48204.998823] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [48204.998826] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [48204.999161] ata2.00: supports DRM functions and may not be fully accessible [48205.000153] ata2.00: configured for UDMA/133 [48205.020982] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [48205.280782] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [48205.540914] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [48205.788708] [drm] RC6 on [48209.765668] PM: resume of devices complete after 5086.767 msecs [48209.766041] usb 1-7:1.0: rebind failed: -517 [48209.766048] usb 1-7:1.1: rebind failed: -517 [48209.766666] PM: Finishing wakeup. [48209.766669] Restarting tasks ... [48209.789251] Bluetooth: hci0: read Intel version: 370810011003110e00 [48209.789256] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [48209.799444] done. [48210.106477] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [48211.796506] e1000e: enp0s31f6 NIC Link is Down [48211.797226] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [48211.799509] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [48211.799695] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [48211.865863] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [48211.866065] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [48211.886810] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [48211.891958] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [48212.080410] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [48212.195089] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [48216.640403] wlp3s0: authenticate with 20:dc:e6:39:23:48 [48216.642691] wlp3s0: send auth to 20:dc:e6:39:23:48 (try 1/3) [48216.644830] wlp3s0: authenticated [48216.648162] wlp3s0: associate with 20:dc:e6:39:23:48 (try 1/3) [48216.651223] wlp3s0: RX AssocResp from 20:dc:e6:39:23:48 (capab=0x31 status=0 aid=2) [48216.660972] wlp3s0: associated [48216.661021] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [48227.170128] systemd[1]: snapd.refresh.timer: Adding 35min 17.131047s random time. [48227.368727] systemd[1]: snapd.refresh.timer: Adding 1h 21min 11.489652s random time. [49189.831509] wlp3s0: deauthenticating from 20:dc:e6:39:23:48 by local choice (Reason: 3=DEAUTH_LEAVING) [49191.427325] PM: Syncing filesystems ... done. [49191.437297] PM: Preparing system for sleep (mem) [49191.438404] Freezing user space processes ... (elapsed 0.001 seconds) done. [49191.440246] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [49191.440352] Freezing remaining freezable tasks ... (elapsed 0.111 seconds) done. [49191.551589] PM: Suspending system (mem) [49191.551715] Suspending console(s) (use no_console_suspend to debug) [49191.769991] sd 1:0:0:0: [sda] Synchronizing SCSI cache [49191.770199] sd 1:0:0:0: [sda] Stopping disk [49191.782561] e1000e: EEE TX LPI TIMER: 00000011 [49192.020181] PM: suspend of devices complete after 251.229 msecs [49192.044220] PM: late suspend of devices complete after 24.024 msecs [49192.045441] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [49192.046252] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [49192.084238] PM: noirq suspend of devices complete after 40.004 msecs [49192.085016] ACPI: Preparing to enter system sleep state S3 [49192.412264] ACPI : EC: EC stopped [49192.412265] PM: Saving platform NVS memory [49192.412273] Disabling non-boot CPUs ... [49192.412955] Broke affinity for irq 279 [49192.414078] smpboot: CPU 1 is now offline [49192.429469] Broke affinity for irq 123 [49192.429476] Broke affinity for irq 124 [49192.429526] Broke affinity for irq 279 [49192.429530] Broke affinity for irq 281 [49192.431431] smpboot: CPU 2 is now offline [49192.453187] Broke affinity for irq 1 [49192.453193] Broke affinity for irq 8 [49192.453197] Broke affinity for irq 9 [49192.453201] Broke affinity for irq 12 [49192.453207] Broke affinity for irq 14 [49192.453211] Broke affinity for irq 16 [49192.453215] Broke affinity for irq 17 [49192.453226] Broke affinity for irq 122 [49192.453229] Broke affinity for irq 123 [49192.453233] Broke affinity for irq 124 [49192.453267] Broke affinity for irq 277 [49192.453271] Broke affinity for irq 279 [49192.453276] Broke affinity for irq 281 [49192.454381] smpboot: CPU 3 is now offline [49192.472388] ACPI: Low-level resume complete [49192.472388] ACPI : EC: EC started [49192.472388] PM: Restoring platform NVS memory [49192.472388] Enabling non-boot CPUs ... [49192.496244] x86: Booting SMP configuration: [49192.496244] smpboot: Booting Node 0 Processor 1 APIC 0x2 [49192.497909] cache: parent cpu1 should not be sleeping [49192.498074] CPU1 is up [49192.524368] smpboot: Booting Node 0 Processor 2 APIC 0x1 [49192.525554] cache: parent cpu2 should not be sleeping [49192.525933] CPU2 is up [49192.556478] smpboot: Booting Node 0 Processor 3 APIC 0x3 [49192.557566] cache: parent cpu3 should not be sleeping [49192.558039] CPU3 is up [49192.566421] ACPI: Waking up from system sleep state S3 [49192.752671] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [49192.752814] PM: noirq resume of devices complete after 38.961 msecs [49192.769057] PM: early resume of devices complete after 16.122 msecs [49192.769613] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [49192.770897] sd 1:0:0:0: [sda] Starting disk [49192.773241] rtc_cmos 00:03: System wakeup disabled by ACPI [49192.776835] [drm] GuC firmware load skipped [49192.820032] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [49192.820032] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [49192.820032] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [49193.086023] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [49193.086848] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [49193.086853] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [49193.086856] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [49193.087455] ata2.00: supports DRM functions and may not be fully accessible [49193.089975] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [49193.089980] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [49193.089983] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [49193.090204] ata2.00: supports DRM functions and may not be fully accessible [49193.091144] ata2.00: configured for UDMA/133 [49193.108568] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [49193.368882] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [49193.628989] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [49193.819996] PM: resume of devices complete after 1050.928 msecs [49193.820364] [drm] RC6 on [49193.820515] usb 1-7:1.0: rebind failed: -517 [49193.820520] usb 1-7:1.1: rebind failed: -517 [49193.820929] PM: Finishing wakeup. [49193.820932] Restarting tasks ... done. [49193.849497] Bluetooth: hci0: read Intel version: 370810011003110e00 [49193.849541] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [49194.166826] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [49195.368427] e1000e: enp0s31f6 NIC Link is Down [49195.369246] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [49195.371425] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [49195.371612] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [49195.437485] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [49195.437678] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [49195.455734] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [49195.458225] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [49195.648445] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [49195.746405] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [49200.198034] wlp3s0: authenticate with 20:dc:e6:39:23:48 [49200.201908] wlp3s0: send auth to 20:dc:e6:39:23:48 (try 1/3) [49200.207982] wlp3s0: authenticated [49200.212084] wlp3s0: associate with 20:dc:e6:39:23:48 (try 1/3) [49200.216193] wlp3s0: RX AssocResp from 20:dc:e6:39:23:48 (capab=0x31 status=0 aid=3) [49200.231383] wlp3s0: associated [49200.231513] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [49205.624703] systemd[1]: snapd.refresh.timer: Adding 2h 3min 19.634939s random time. [49210.839880] systemd[1]: snapd.refresh.timer: Adding 52min 52.301147s random time. [49535.178713] wlp3s0: deauthenticating from 20:dc:e6:39:23:48 by local choice (Reason: 3=DEAUTH_LEAVING) [49536.978191] PM: Syncing filesystems ... done. [49536.987860] PM: Preparing system for sleep (mem) [49536.988325] Freezing user space processes ... (elapsed 0.002 seconds) done. [49536.990361] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [49536.990613] Freezing remaining freezable tasks ... (elapsed 0.055 seconds) done. [49537.045784] PM: Suspending system (mem) [49537.045888] Suspending console(s) (use no_console_suspend to debug) [49537.261261] sd 1:0:0:0: [sda] Synchronizing SCSI cache [49537.262865] sd 1:0:0:0: [sda] Stopping disk [49537.273454] e1000e: EEE TX LPI TIMER: 00000011 [49538.293489] PM: suspend of devices complete after 1033.003 msecs [49538.320588] PM: late suspend of devices complete after 27.082 msecs [49538.321975] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [49538.322937] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [49538.360295] PM: noirq suspend of devices complete after 39.691 msecs [49538.361333] ACPI: Preparing to enter system sleep state S3 [49538.688245] ACPI : EC: EC stopped [49538.688247] PM: Saving platform NVS memory [49538.688255] Disabling non-boot CPUs ... [49538.689042] Broke affinity for irq 279 [49538.691102] smpboot: CPU 1 is now offline [49538.705459] Broke affinity for irq 123 [49538.705466] Broke affinity for irq 124 [49538.705515] Broke affinity for irq 279 [49538.705519] Broke affinity for irq 281 [49538.707543] smpboot: CPU 2 is now offline [49538.733079] Broke affinity for irq 1 [49538.733085] Broke affinity for irq 8 [49538.733089] Broke affinity for irq 9 [49538.733093] Broke affinity for irq 12 [49538.733097] Broke affinity for irq 14 [49538.733102] Broke affinity for irq 16 [49538.733106] Broke affinity for irq 17 [49538.733116] Broke affinity for irq 122 [49538.733120] Broke affinity for irq 123 [49538.733124] Broke affinity for irq 124 [49538.733158] Broke affinity for irq 277 [49538.733163] Broke affinity for irq 279 [49538.733167] Broke affinity for irq 281 [49538.734272] smpboot: CPU 3 is now offline [49538.744377] ACPI: Low-level resume complete [49538.744377] ACPI : EC: EC started [49538.744377] PM: Restoring platform NVS memory [49538.744377] Enabling non-boot CPUs ... [49538.768246] x86: Booting SMP configuration: [49538.768247] smpboot: Booting Node 0 Processor 1 APIC 0x2 [49538.769917] cache: parent cpu1 should not be sleeping [49538.770081] CPU1 is up [49538.796372] smpboot: Booting Node 0 Processor 2 APIC 0x1 [49538.797534] cache: parent cpu2 should not be sleeping [49538.797906] CPU2 is up [49538.840473] smpboot: Booting Node 0 Processor 3 APIC 0x3 [49538.841648] cache: parent cpu3 should not be sleeping [49538.842141] CPU3 is up [49538.850389] ACPI: Waking up from system sleep state S3 [49539.036694] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [49539.036847] PM: noirq resume of devices complete after 38.975 msecs [49539.052258] PM: early resume of devices complete after 15.287 msecs [49539.052855] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [49539.053578] sd 1:0:0:0: [sda] Starting disk [49539.058938] [drm] GuC firmware load skipped [49539.059600] rtc_cmos 00:03: System wakeup disabled by ACPI [49539.104077] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [49539.104077] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [49539.104077] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [49539.365717] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [49539.366338] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [49539.366343] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [49539.366346] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [49539.366721] ata2.00: supports DRM functions and may not be fully accessible [49539.368863] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [49539.368868] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [49539.368871] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [49539.369200] ata2.00: supports DRM functions and may not be fully accessible [49539.370218] ata2.00: configured for UDMA/133 [49539.397006] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [49539.656884] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [49539.917015] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [49540.828735] [drm] RC6 on [49542.101131] PM: resume of devices complete after 3048.857 msecs [49542.101394] usb 1-7:1.0: rebind failed: -517 [49542.101398] usb 1-7:1.1: rebind failed: -517 [49542.101807] PM: Finishing wakeup. [49542.101811] Restarting tasks ... [49542.127710] Bluetooth: hci0: read Intel version: 370810011003110e00 [49542.127714] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [49542.133569] done. [49542.446850] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [49543.900589] e1000e: enp0s31f6 NIC Link is Down [49543.902499] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [49543.904125] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [49543.904368] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [49543.972067] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [49543.972255] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [49543.993587] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [49543.996323] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [49544.184534] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [49544.296225] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [49548.799050] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [49548.801849] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [49548.803946] wlp3s0: authenticated [49548.808035] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [49548.833650] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=16) [49548.848612] wlp3s0: associated [49548.848656] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [49550.205533] systemd[1]: snapd.refresh.timer: Adding 5min 1.497820s random time. [49550.424170] systemd[1]: snapd.refresh.timer: Adding 3h 2min 16.898799s random time. [50063.664610] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [50064.373776] PM: Syncing filesystems ... done. [50064.381050] PM: Preparing system for sleep (mem) [50064.381432] Freezing user space processes ... (elapsed 0.064 seconds) done. [50064.445618] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [50064.446057] Freezing remaining freezable tasks ... (elapsed 0.082 seconds) done. [50064.528872] PM: Suspending system (mem) [50064.528999] Suspending console(s) (use no_console_suspend to debug) [50064.746039] sd 1:0:0:0: [sda] Synchronizing SCSI cache [50064.746203] sd 1:0:0:0: [sda] Stopping disk [50064.759005] e1000e: EEE TX LPI TIMER: 00000011 [50065.281555] PM: suspend of devices complete after 536.612 msecs [50065.308556] PM: late suspend of devices complete after 26.986 msecs [50065.309845] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [50065.310655] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [50065.348266] PM: noirq suspend of devices complete after 39.695 msecs [50065.349044] ACPI: Preparing to enter system sleep state S3 [50065.676234] ACPI : EC: EC stopped [50065.676235] PM: Saving platform NVS memory [50065.676243] Disabling non-boot CPUs ... [50065.676940] Broke affinity for irq 279 [50065.678104] smpboot: CPU 1 is now offline [50065.693478] Broke affinity for irq 123 [50065.693484] Broke affinity for irq 124 [50065.693534] Broke affinity for irq 279 [50065.693539] Broke affinity for irq 281 [50065.695427] smpboot: CPU 2 is now offline [50065.721228] Broke affinity for irq 1 [50065.721235] Broke affinity for irq 8 [50065.721238] Broke affinity for irq 9 [50065.721243] Broke affinity for irq 12 [50065.721248] Broke affinity for irq 14 [50065.721252] Broke affinity for irq 16 [50065.721256] Broke affinity for irq 17 [50065.721267] Broke affinity for irq 122 [50065.721270] Broke affinity for irq 123 [50065.721274] Broke affinity for irq 124 [50065.721307] Broke affinity for irq 277 [50065.721312] Broke affinity for irq 279 [50065.721316] Broke affinity for irq 281 [50065.722411] smpboot: CPU 3 is now offline [50065.740389] ACPI: Low-level resume complete [50065.740389] ACPI : EC: EC started [50065.740389] PM: Restoring platform NVS memory [50065.740389] Enabling non-boot CPUs ... [50065.764243] x86: Booting SMP configuration: [50065.764244] smpboot: Booting Node 0 Processor 1 APIC 0x2 [50065.765907] cache: parent cpu1 should not be sleeping [50065.766069] CPU1 is up [50065.792398] smpboot: Booting Node 0 Processor 2 APIC 0x1 [50065.793663] cache: parent cpu2 should not be sleeping [50065.794068] CPU2 is up [50065.824477] smpboot: Booting Node 0 Processor 3 APIC 0x3 [50065.825759] cache: parent cpu3 should not be sleeping [50065.826238] CPU3 is up [50065.834509] ACPI: Waking up from system sleep state S3 [50066.020707] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [50066.020859] PM: noirq resume of devices complete after 39.022 msecs [50066.040904] PM: early resume of devices complete after 19.920 msecs [50066.041417] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [50066.041888] sd 1:0:0:0: [sda] Starting disk [50066.045853] rtc_cmos 00:03: System wakeup disabled by ACPI [50066.049456] [drm] GuC firmware load skipped [50066.092076] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [50066.092076] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [50066.092076] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [50066.352459] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [50066.353033] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [50066.353036] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [50066.353037] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [50066.353415] ata2.00: supports DRM functions and may not be fully accessible [50066.356072] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [50066.356075] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [50066.356076] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [50066.356339] ata2.00: supports DRM functions and may not be fully accessible [50066.357320] ata2.00: configured for UDMA/133 [50066.380275] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [50066.640993] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [50066.900666] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [50067.804450] [drm] RC6 on [50068.070151] PM: resume of devices complete after 2029.233 msecs [50068.070457] usb 1-7:1.0: rebind failed: -517 [50068.070461] usb 1-7:1.1: rebind failed: -517 [50068.070873] PM: Finishing wakeup. [50068.070875] Restarting tasks ... done. [50068.100316] Bluetooth: hci0: read Intel version: 370810011003110e00 [50068.100356] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [50068.419466] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [50069.876576] e1000e: enp0s31f6 NIC Link is Down [50069.877289] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [50069.879546] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [50069.879731] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [50069.947261] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [50069.947526] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [50069.968559] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [50069.970893] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [50070.160566] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [50070.298936] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [50074.808910] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [50074.812769] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [50074.814943] wlp3s0: authenticated [50074.816093] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [50074.820944] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=17) [50074.822526] wlp3s0: associated [50074.822692] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [50075.253672] systemd[1]: snapd.refresh.timer: Adding 6min 26.832713s random time. [50075.486164] systemd[1]: snapd.refresh.timer: Adding 5h 50min 28.648434s random time. [50111.488172] usb 1-2.1: new high-speed USB device number 48 using xhci_hcd [50111.590875] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [50111.590879] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [50111.590882] usb 1-2.1: Product: DT101 II [50111.590885] usb 1-2.1: Manufacturer: Kingston [50111.590887] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [50111.591952] usb-storage 1-2.1:1.0: USB Mass Storage device detected [50111.593418] scsi host2: usb-storage 1-2.1:1.0 [50112.605679] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [50112.607330] sd 2:0:0:0: Attached scsi generic sg1 type 0 [50112.607604] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [50112.607841] sd 2:0:0:0: [sdb] Write Protect is off [50112.607849] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [50112.608118] sd 2:0:0:0: [sdb] No Caching mode page found [50112.608132] sd 2:0:0:0: [sdb] Assuming drive cache: write through [50112.612425] sdb: sdb4 [50112.613338] sd 2:0:0:0: [sdb] Attached SCSI removable disk [50113.016780] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [50170.492121] usb 1-2.1: USB disconnect, device number 48 [50172.279794] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [50173.914140] PM: Syncing filesystems ... done. [50173.926600] PM: Preparing system for sleep (mem) [50173.927030] Freezing user space processes ... (elapsed 0.001 seconds) done. [50173.928963] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [50173.929091] Freezing remaining freezable tasks ... (elapsed 0.095 seconds) done. [50174.024391] PM: Suspending system (mem) [50174.024452] Suspending console(s) (use no_console_suspend to debug) [50174.241931] sd 1:0:0:0: [sda] Synchronizing SCSI cache [50174.242122] sd 1:0:0:0: [sda] Stopping disk [50174.254783] e1000e: EEE TX LPI TIMER: 00000011 [50175.274112] PM: suspend of devices complete after 1033.360 msecs [50175.296537] PM: late suspend of devices complete after 22.408 msecs [50175.297916] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [50175.298802] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [50175.336267] PM: noirq suspend of devices complete after 39.717 msecs [50175.337045] ACPI: Preparing to enter system sleep state S3 [50175.664231] ACPI : EC: EC stopped [50175.664233] PM: Saving platform NVS memory [50175.664241] Disabling non-boot CPUs ... [50175.664958] Broke affinity for irq 279 [50175.666097] smpboot: CPU 1 is now offline [50175.681481] Broke affinity for irq 123 [50175.681488] Broke affinity for irq 124 [50175.681537] Broke affinity for irq 279 [50175.681542] Broke affinity for irq 281 [50175.683437] smpboot: CPU 2 is now offline [50175.705243] Broke affinity for irq 1 [50175.705249] Broke affinity for irq 8 [50175.705254] Broke affinity for irq 9 [50175.705258] Broke affinity for irq 12 [50175.705262] Broke affinity for irq 14 [50175.705266] Broke affinity for irq 16 [50175.705270] Broke affinity for irq 17 [50175.705280] Broke affinity for irq 122 [50175.705284] Broke affinity for irq 123 [50175.705288] Broke affinity for irq 124 [50175.705321] Broke affinity for irq 277 [50175.705326] Broke affinity for irq 279 [50175.705330] Broke affinity for irq 281 [50175.706426] smpboot: CPU 3 is now offline [50175.724385] ACPI: Low-level resume complete [50175.724385] ACPI : EC: EC started [50175.724385] PM: Restoring platform NVS memory [50175.724385] Enabling non-boot CPUs ... [50175.748242] x86: Booting SMP configuration: [50175.748243] smpboot: Booting Node 0 Processor 1 APIC 0x2 [50175.749927] cache: parent cpu1 should not be sleeping [50175.750093] CPU1 is up [50175.796399] smpboot: Booting Node 0 Processor 2 APIC 0x1 [50175.797684] cache: parent cpu2 should not be sleeping [50175.798103] CPU2 is up [50175.824476] smpboot: Booting Node 0 Processor 3 APIC 0x3 [50175.825587] cache: parent cpu3 should not be sleeping [50175.826037] CPU3 is up [50175.834253] ACPI: Waking up from system sleep state S3 [50176.004683] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [50176.004801] PM: noirq resume of devices complete after 38.943 msecs [50176.018860] PM: early resume of devices complete after 13.938 msecs [50176.019354] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [50176.020001] sd 1:0:0:0: [sda] Starting disk [50176.022933] rtc_cmos 00:03: System wakeup disabled by ACPI [50176.026768] [drm] GuC firmware load skipped [50176.068097] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [50176.068097] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [50176.068097] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [50176.332517] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [50176.333302] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [50176.333304] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [50176.333305] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [50176.333605] ata2.00: supports DRM functions and may not be fully accessible [50176.335365] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [50176.335367] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [50176.335368] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [50176.335609] ata2.00: supports DRM functions and may not be fully accessible [50176.336827] ata2.00: configured for UDMA/133 [50176.361576] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [50176.624897] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [50176.884917] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [50177.820401] [drm] RC6 on [50178.049848] PM: resume of devices complete after 2030.975 msecs [50178.050117] usb 1-7:1.0: rebind failed: -517 [50178.050122] usb 1-7:1.1: rebind failed: -517 [50178.050538] PM: Finishing wakeup. [50178.050540] Restarting tasks ... done. [50178.074237] Bluetooth: hci0: read Intel version: 370810011003110e00 [50178.074241] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [50178.392473] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [50179.676381] e1000e: enp0s31f6 NIC Link is Down [50179.677129] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [50179.679496] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [50179.679701] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [50179.745321] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [50179.745547] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [50179.763715] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [50179.766181] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [50179.956520] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [50180.055405] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [50184.526451] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [50184.529249] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [50184.532733] wlp3s0: authenticated [50184.536039] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [50184.542205] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=17) [50184.551078] wlp3s0: associated [50184.551121] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [50184.923367] systemd[1]: snapd.refresh.timer: Adding 1h 39.650203s random time. [50185.156443] systemd[1]: snapd.refresh.timer: Adding 4h 16min 28.488401s random time. [53949.944662] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [53950.661462] PM: Syncing filesystems ... done. [53950.699957] PM: Preparing system for sleep (mem) [53950.700624] Freezing user space processes ... (elapsed 0.001 seconds) done. [53950.702586] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [53950.702690] Freezing remaining freezable tasks ... (elapsed 0.051 seconds) done. [53950.754521] PM: Suspending system (mem) [53950.754566] Suspending console(s) (use no_console_suspend to debug) [53950.970168] sd 1:0:0:0: [sda] Synchronizing SCSI cache [53950.970312] sd 1:0:0:0: [sda] Stopping disk [53950.983002] e1000e: EEE TX LPI TIMER: 00000011 [53951.700761] PM: suspend of devices complete after 731.818 msecs [53951.724651] PM: late suspend of devices complete after 23.873 msecs [53951.726030] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [53951.726966] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [53951.764240] PM: noirq suspend of devices complete after 39.575 msecs [53951.765029] ACPI: Preparing to enter system sleep state S3 [53952.092288] ACPI : EC: EC stopped [53952.092291] PM: Saving platform NVS memory [53952.092302] Disabling non-boot CPUs ... [53952.093300] Broke affinity for irq 279 [53952.094505] smpboot: CPU 1 is now offline [53952.109874] Broke affinity for irq 123 [53952.109882] Broke affinity for irq 124 [53952.109946] Broke affinity for irq 279 [53952.109954] Broke affinity for irq 281 [53952.112250] smpboot: CPU 2 is now offline [53952.137370] Broke affinity for irq 1 [53952.137377] Broke affinity for irq 8 [53952.137382] Broke affinity for irq 9 [53952.137387] Broke affinity for irq 12 [53952.137392] Broke affinity for irq 14 [53952.137397] Broke affinity for irq 16 [53952.137401] Broke affinity for irq 17 [53952.137413] Broke affinity for irq 122 [53952.137417] Broke affinity for irq 123 [53952.137422] Broke affinity for irq 124 [53952.137459] Broke affinity for irq 277 [53952.137464] Broke affinity for irq 279 [53952.137469] Broke affinity for irq 281 [53952.138574] smpboot: CPU 3 is now offline [53952.156399] ACPI: Low-level resume complete [53952.156399] ACPI : EC: EC started [53952.156399] PM: Restoring platform NVS memory [53952.156399] Enabling non-boot CPUs ... [53952.180248] x86: Booting SMP configuration: [53952.180248] smpboot: Booting Node 0 Processor 1 APIC 0x2 [53952.181915] cache: parent cpu1 should not be sleeping [53952.182080] CPU1 is up [53952.208408] smpboot: Booting Node 0 Processor 2 APIC 0x1 [53952.209653] cache: parent cpu2 should not be sleeping [53952.210071] CPU2 is up [53952.240486] smpboot: Booting Node 0 Processor 3 APIC 0x3 [53952.241692] cache: parent cpu3 should not be sleeping [53952.242173] CPU3 is up [53952.250560] ACPI: Waking up from system sleep state S3 [53952.436695] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [53952.436851] PM: noirq resume of devices complete after 39.018 msecs [53952.450884] PM: early resume of devices complete after 13.911 msecs [53952.451314] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [53952.452118] sd 1:0:0:0: [sda] Starting disk [53952.454838] rtc_cmos 00:03: System wakeup disabled by ACPI [53952.459126] [drm] GuC firmware load skipped [53952.500044] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [53952.500044] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [53952.500044] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [53952.764759] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [53952.765105] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [53952.765107] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [53952.765108] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [53952.765346] ata2.00: supports DRM functions and may not be fully accessible [53952.766774] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [53952.766775] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [53952.766776] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [53952.766997] ata2.00: supports DRM functions and may not be fully accessible [53952.767900] ata2.00: configured for UDMA/133 [53952.789078] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [53953.048487] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [53953.308445] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [53953.820368] [drm] RC6 on [53955.490217] PM: resume of devices complete after 3039.319 msecs [53955.490482] usb 1-7:1.0: rebind failed: -517 [53955.490486] usb 1-7:1.1: rebind failed: -517 [53955.490879] PM: Finishing wakeup. [53955.490881] Restarting tasks ... done. [53955.525213] Bluetooth: hci0: read Intel version: 370810011003110e00 [53955.525262] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [53955.844438] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [53957.116387] e1000e: enp0s31f6 NIC Link is Down [53957.117144] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [53957.119493] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [53957.119717] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [53957.187103] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [53957.187311] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [53957.206447] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [53957.211213] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [53957.400455] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [53957.523082] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [53962.097421] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [53962.100316] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [53962.104071] wlp3s0: authenticated [53962.108067] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [53962.112380] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=15) [53962.115452] wlp3s0: associated [53962.115568] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [53962.487447] systemd[1]: snapd.refresh.timer: Adding 4h 19min 43.391190s random time. [53962.691173] systemd[1]: snapd.refresh.timer: Adding 5h 10min 25.798586s random time. [53968.384094] usb 1-2.1: new high-speed USB device number 49 using xhci_hcd [53968.486613] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [53968.486615] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [53968.486616] usb 1-2.1: Product: DT101 II [53968.486617] usb 1-2.1: Manufacturer: Kingston [53968.486617] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [53968.487331] usb-storage 1-2.1:1.0: USB Mass Storage device detected [53968.488114] scsi host2: usb-storage 1-2.1:1.0 [53969.501419] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [53969.502467] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [53969.502643] sd 2:0:0:0: [sdb] Write Protect is off [53969.502649] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [53969.502825] sd 2:0:0:0: [sdb] No Caching mode page found [53969.502834] sd 2:0:0:0: [sdb] Assuming drive cache: write through [53969.503692] sd 2:0:0:0: Attached scsi generic sg1 type 0 [53969.505380] sdb: sdb4 [53969.506584] sd 2:0:0:0: [sdb] Attached SCSI removable disk [53969.962183] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [54013.892218] usb 1-2.1: USB disconnect, device number 49 [57080.580401] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [57081.258120] PM: Syncing filesystems ... done. [57081.262101] PM: Preparing system for sleep (mem) [57081.262565] Freezing user space processes ... (elapsed 0.001 seconds) done. [57081.264225] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [57081.264336] Freezing remaining freezable tasks ... (elapsed 0.024 seconds) done. [57081.288663] PM: Suspending system (mem) [57081.288697] Suspending console(s) (use no_console_suspend to debug) [57081.507027] sd 1:0:0:0: [sda] Synchronizing SCSI cache [57081.507212] sd 1:0:0:0: [sda] Stopping disk [57081.519733] e1000e: EEE TX LPI TIMER: 00000011 [57082.155544] PM: suspend of devices complete after 650.575 msecs [57082.176195] PM: late suspend of devices complete after 20.637 msecs [57082.177345] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [57082.178221] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [57082.216255] PM: noirq suspend of devices complete after 40.045 msecs [57082.217033] ACPI: Preparing to enter system sleep state S3 [57082.544258] ACPI : EC: EC stopped [57082.544260] PM: Saving platform NVS memory [57082.544267] Disabling non-boot CPUs ... [57082.544819] Broke affinity for irq 279 [57082.545967] smpboot: CPU 1 is now offline [57082.561477] Broke affinity for irq 123 [57082.561484] Broke affinity for irq 124 [57082.561533] Broke affinity for irq 279 [57082.561538] Broke affinity for irq 281 [57082.563440] smpboot: CPU 2 is now offline [57082.589224] Broke affinity for irq 1 [57082.589231] Broke affinity for irq 8 [57082.589235] Broke affinity for irq 9 [57082.589239] Broke affinity for irq 12 [57082.589243] Broke affinity for irq 14 [57082.589248] Broke affinity for irq 16 [57082.589252] Broke affinity for irq 17 [57082.589263] Broke affinity for irq 122 [57082.589266] Broke affinity for irq 123 [57082.589270] Broke affinity for irq 124 [57082.589303] Broke affinity for irq 277 [57082.589308] Broke affinity for irq 279 [57082.589312] Broke affinity for irq 281 [57082.590406] smpboot: CPU 3 is now offline [57082.608381] ACPI: Low-level resume complete [57082.608381] ACPI : EC: EC started [57082.608381] PM: Restoring platform NVS memory [57082.608381] Enabling non-boot CPUs ... [57082.632247] x86: Booting SMP configuration: [57082.632248] smpboot: Booting Node 0 Processor 1 APIC 0x2 [57082.633912] cache: parent cpu1 should not be sleeping [57082.634076] CPU1 is up [57082.676400] smpboot: Booting Node 0 Processor 2 APIC 0x1 [57082.677640] cache: parent cpu2 should not be sleeping [57082.678059] CPU2 is up [57082.704478] smpboot: Booting Node 0 Processor 3 APIC 0x3 [57082.705654] cache: parent cpu3 should not be sleeping [57082.706095] CPU3 is up [57082.714298] ACPI: Waking up from system sleep state S3 [57082.900661] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [57082.900809] PM: noirq resume of devices complete after 38.933 msecs [57082.918513] PM: early resume of devices complete after 17.579 msecs [57082.919122] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [57082.919874] sd 1:0:0:0: [sda] Starting disk [57082.923043] rtc_cmos 00:03: System wakeup disabled by ACPI [57082.927748] [drm] GuC firmware load skipped [57082.968032] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [57082.968032] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [57083.012039] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [57083.232257] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [57083.233034] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [57083.233037] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [57083.233040] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [57083.233636] ata2.00: supports DRM functions and may not be fully accessible [57083.236412] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [57083.236417] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [57083.236420] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [57083.236969] ata2.00: supports DRM functions and may not be fully accessible [57083.238642] ata2.00: configured for UDMA/133 [57083.256349] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [57083.516876] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [57083.776446] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [57083.941784] PM: resume of devices complete after 1023.258 msecs [57083.942033] usb 1-7:1.0: rebind failed: -517 [57083.942038] usb 1-7:1.1: rebind failed: -517 [57083.942386] PM: Finishing wakeup. [57083.942388] Restarting tasks ... done. [57083.978032] Bluetooth: hci0: read Intel version: 370810011003110e00 [57083.978036] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [57084.296210] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [57084.796129] [drm] RC6 on [57085.820435] e1000e: enp0s31f6 NIC Link is Down [57085.822064] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [57085.824323] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57085.824581] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57085.891739] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57085.892043] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57085.909662] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [57085.913291] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [57086.104392] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [57086.199359] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [57090.589931] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [57090.600098] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [57090.603751] wlp3s0: authenticated [57090.608060] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [57090.615412] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=2) [57090.619067] wlp3s0: associated [57090.619185] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [57090.963873] systemd[1]: snapd.refresh.timer: Adding 4h 34min 11.847020s random time. [57091.198993] systemd[1]: snapd.refresh.timer: Adding 1h 15min 3.623519s random time. [57191.444157] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [57192.295670] PM: Syncing filesystems ... done. [57192.319239] PM: Preparing system for sleep (mem) [57192.321170] Freezing user space processes ... (elapsed 0.005 seconds) done. [57192.326284] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [57192.326543] Freezing remaining freezable tasks ... (elapsed 0.095 seconds) done. [57192.421825] PM: Suspending system (mem) [57192.421951] Suspending console(s) (use no_console_suspend to debug) [57192.638056] sd 1:0:0:0: [sda] Synchronizing SCSI cache [57192.638216] sd 1:0:0:0: [sda] Stopping disk [57192.651161] e1000e: EEE TX LPI TIMER: 00000011 [57192.954443] PM: suspend of devices complete after 317.521 msecs [57192.980160] PM: late suspend of devices complete after 25.705 msecs [57192.981292] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [57192.982098] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [57193.020226] PM: noirq suspend of devices complete after 40.052 msecs [57193.021004] ACPI: Preparing to enter system sleep state S3 [57193.348197] ACPI : EC: EC stopped [57193.348199] PM: Saving platform NVS memory [57193.348207] Disabling non-boot CPUs ... [57193.348911] Broke affinity for irq 279 [57193.350073] smpboot: CPU 1 is now offline [57193.365349] Broke affinity for irq 123 [57193.365355] Broke affinity for irq 124 [57193.365404] Broke affinity for irq 279 [57193.365409] Broke affinity for irq 281 [57193.367326] smpboot: CPU 2 is now offline [57193.381231] Broke affinity for irq 1 [57193.381238] Broke affinity for irq 8 [57193.381242] Broke affinity for irq 9 [57193.381246] Broke affinity for irq 12 [57193.381250] Broke affinity for irq 14 [57193.381255] Broke affinity for irq 16 [57193.381259] Broke affinity for irq 17 [57193.381269] Broke affinity for irq 122 [57193.381273] Broke affinity for irq 123 [57193.381277] Broke affinity for irq 124 [57193.381310] Broke affinity for irq 277 [57193.381315] Broke affinity for irq 279 [57193.381320] Broke affinity for irq 281 [57193.382414] smpboot: CPU 3 is now offline [57193.400399] ACPI: Low-level resume complete [57193.400399] ACPI : EC: EC started [57193.400399] PM: Restoring platform NVS memory [57193.400399] Enabling non-boot CPUs ... [57193.424239] x86: Booting SMP configuration: [57193.424240] smpboot: Booting Node 0 Processor 1 APIC 0x2 [57193.425926] cache: parent cpu1 should not be sleeping [57193.426090] CPU1 is up [57193.476401] smpboot: Booting Node 0 Processor 2 APIC 0x1 [57193.477675] cache: parent cpu2 should not be sleeping [57193.478099] CPU2 is up [57193.500473] smpboot: Booting Node 0 Processor 3 APIC 0x3 [57193.501719] cache: parent cpu3 should not be sleeping [57193.502210] CPU3 is up [57193.510474] ACPI: Waking up from system sleep state S3 [57193.696666] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [57193.696825] PM: noirq resume of devices complete after 38.960 msecs [57193.713044] PM: early resume of devices complete after 16.096 msecs [57193.713520] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [57193.714354] sd 1:0:0:0: [sda] Starting disk [57193.718465] rtc_cmos 00:03: System wakeup disabled by ACPI [57193.720156] [drm] GuC firmware load skipped [57193.764081] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [57193.764081] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [57193.764081] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [57194.024693] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [57194.025163] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [57194.025164] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [57194.025165] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [57194.025423] ata2.00: supports DRM functions and may not be fully accessible [57194.027031] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [57194.027033] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [57194.027034] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [57194.027631] ata2.00: supports DRM functions and may not be fully accessible [57194.028618] ata2.00: configured for UDMA/133 [57194.052912] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [57194.312975] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [57194.572759] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [57194.742207] PM: resume of devices complete after 1029.152 msecs [57194.742483] usb 1-7:1.0: rebind failed: -517 [57194.742487] usb 1-7:1.1: rebind failed: -517 [57194.742901] PM: Finishing wakeup. [57194.742903] Restarting tasks ... [57194.763203] Bluetooth: hci0: read Intel version: 370810011003110e00 [57194.769382] done. [57194.769419] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [57194.812102] [drm] RC6 on [57195.069330] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [57196.832286] e1000e: enp0s31f6 NIC Link is Down [57196.836790] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [57196.839171] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57196.839433] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57196.904887] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57196.905089] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57196.922119] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [57196.925818] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [57197.120560] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [57197.227133] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [57201.670385] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [57201.678848] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [57201.681000] wlp3s0: authenticated [57201.684077] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [57201.687935] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=6) [57201.698463] wlp3s0: associated [57201.698548] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [57202.050259] systemd[1]: snapd.refresh.timer: Adding 6min 2.656224s random time. [57202.265301] systemd[1]: snapd.refresh.timer: Adding 4h 3.593651s random time. [57265.796430] usb 1-2.1: new high-speed USB device number 50 using xhci_hcd [57265.900394] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [57265.900402] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [57265.900407] usb 1-2.1: Product: DT101 II [57265.900411] usb 1-2.1: Manufacturer: Kingston [57265.900415] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [57265.902081] usb-storage 1-2.1:1.0: USB Mass Storage device detected [57265.902503] scsi host2: usb-storage 1-2.1:1.0 [57266.909649] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [57266.911199] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [57266.911568] sd 2:0:0:0: [sdb] Write Protect is off [57266.911579] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [57266.911785] sd 2:0:0:0: [sdb] No Caching mode page found [57266.911801] sd 2:0:0:0: [sdb] Assuming drive cache: write through [57266.912875] sd 2:0:0:0: Attached scsi generic sg1 type 0 [57266.914849] sdb: sdb4 [57266.916314] sd 2:0:0:0: [sdb] Attached SCSI removable disk [57267.329920] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [57297.460963] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [57298.397998] usb 1-2.1: USB disconnect, device number 50 [57299.326376] PM: Syncing filesystems ... done. [57299.412585] PM: Preparing system for sleep (mem) [57299.413474] Freezing user space processes ... (elapsed 0.002 seconds) done. [57299.415797] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [57299.415915] Freezing remaining freezable tasks ... (elapsed 0.099 seconds) done. [57299.515154] PM: Suspending system (mem) [57299.515225] Suspending console(s) (use no_console_suspend to debug) [57299.730208] sd 1:0:0:0: [sda] Synchronizing SCSI cache [57299.730888] sd 1:0:0:0: [sda] Stopping disk [57299.742378] e1000e: EEE TX LPI TIMER: 00000011 [57300.762105] PM: suspend of devices complete after 1033.630 msecs [57300.788625] PM: late suspend of devices complete after 26.499 msecs [57300.790279] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [57300.791443] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [57300.828301] PM: noirq suspend of devices complete after 39.659 msecs [57300.829338] ACPI: Preparing to enter system sleep state S3 [57301.156232] ACPI : EC: EC stopped [57301.156233] PM: Saving platform NVS memory [57301.156242] Disabling non-boot CPUs ... [57301.157007] Broke affinity for irq 279 [57301.158174] smpboot: CPU 1 is now offline [57301.173703] Broke affinity for irq 123 [57301.173711] Broke affinity for irq 124 [57301.173772] Broke affinity for irq 279 [57301.173779] Broke affinity for irq 281 [57301.175893] smpboot: CPU 2 is now offline [57301.201224] Broke affinity for irq 1 [57301.201231] Broke affinity for irq 8 [57301.201235] Broke affinity for irq 9 [57301.201239] Broke affinity for irq 12 [57301.201244] Broke affinity for irq 14 [57301.201248] Broke affinity for irq 16 [57301.201252] Broke affinity for irq 17 [57301.201262] Broke affinity for irq 122 [57301.201266] Broke affinity for irq 123 [57301.201269] Broke affinity for irq 124 [57301.201322] Broke affinity for irq 277 [57301.201328] Broke affinity for irq 279 [57301.201332] Broke affinity for irq 281 [57301.202441] smpboot: CPU 3 is now offline [57301.220392] ACPI: Low-level resume complete [57301.220392] ACPI : EC: EC started [57301.220392] PM: Restoring platform NVS memory [57301.220392] Enabling non-boot CPUs ... [57301.244245] x86: Booting SMP configuration: [57301.244245] smpboot: Booting Node 0 Processor 1 APIC 0x2 [57301.245933] cache: parent cpu1 should not be sleeping [57301.246098] CPU1 is up [57301.296407] smpboot: Booting Node 0 Processor 2 APIC 0x1 [57301.297699] cache: parent cpu2 should not be sleeping [57301.298113] CPU2 is up [57301.324487] smpboot: Booting Node 0 Processor 3 APIC 0x3 [57301.325596] cache: parent cpu3 should not be sleeping [57301.326031] CPU3 is up [57301.334197] ACPI: Waking up from system sleep state S3 [57301.520677] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [57301.520870] PM: noirq resume of devices complete after 39.010 msecs [57301.533227] PM: early resume of devices complete after 12.233 msecs [57301.533713] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [57301.534335] sd 1:0:0:0: [sda] Starting disk [57301.538965] rtc_cmos 00:03: System wakeup disabled by ACPI [57301.540428] [drm] GuC firmware load skipped [57301.584305] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [57301.584305] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [57301.584305] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [57301.844557] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [57301.845125] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [57301.845128] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [57301.845129] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [57301.845575] ata2.00: supports DRM functions and may not be fully accessible [57301.848435] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [57301.848438] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [57301.848440] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [57301.848831] ata2.00: supports DRM functions and may not be fully accessible [57301.849943] ata2.00: configured for UDMA/133 [57301.876381] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [57302.136984] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [57302.396989] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [57302.812664] [drm] RC6 on [57303.565642] PM: resume of devices complete after 2032.404 msecs [57303.565908] usb 1-7:1.0: rebind failed: -517 [57303.565913] usb 1-7:1.1: rebind failed: -517 [57303.566322] PM: Finishing wakeup. [57303.566326] Restarting tasks ... [57303.589183] Bluetooth: hci0: read Intel version: 370810011003110e00 [57303.589187] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [57303.603333] done. [57303.907210] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [57305.620282] e1000e: enp0s31f6 NIC Link is Down [57305.621134] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [57305.623384] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57305.623569] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57305.689504] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57305.689707] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [57305.712113] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [57305.716264] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [57305.904871] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [57306.039360] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [57310.495670] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [57310.499540] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [57310.502254] wlp3s0: authenticated [57310.504066] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [57310.515124] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=17) [57310.527197] wlp3s0: associated [57310.527286] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [57310.856605] systemd[1]: snapd.refresh.timer: Adding 5h 39min 59.394682s random time. [57311.084975] systemd[1]: snapd.refresh.timer: Adding 39min 40.659072s random time. [57993.421983] systemd[1]: snapd.refresh.timer: Adding 3h 13min 19.669219s random time. [57993.927383] systemd[1]: snapd.refresh.timer: Adding 3h 54min 52.789645s random time. [57994.260413] systemd[1]: snapd.refresh.timer: Adding 1h 26min 29.902088s random time. [57994.429335] systemd[1]: snapd.refresh.timer: Adding 4h 44min 52.163610s random time. [58022.683636] systemd[1]: snapd.refresh.timer: Adding 5h 7min 34.889151s random time. [58023.699387] systemd[1]: snapd.refresh.timer: Adding 5h 44min 49.586771s random time. [58024.639206] systemd[1]: snapd.refresh.timer: Adding 10min 30.826209s random time. [58025.443194] systemd[1]: snapd.refresh.timer: Adding 4h 48min 12.488656s random time. [58042.672492] systemd[1]: snapd.refresh.timer: Adding 5h 6min 50.493571s random time. [58043.519268] systemd[1]: snapd.refresh.timer: Adding 19min 38.676862s random time. [58107.064192] systemd[1]: snapd.refresh.timer: Adding 5h 52min 36.298383s random time. [58163.978782] systemd[1]: snapd.refresh.timer: Adding 4h 9min 8.106725s random time. [58164.447086] systemd[1]: snapd.refresh.timer: Adding 4h 41min 56.777866s random time. [58168.294264] systemd[1]: snapd.refresh.timer: Adding 4h 35min 12.777636s random time. [58168.971236] systemd[1]: snapd.refresh.timer: Adding 4h 1min 46.824242s random time. [58271.635016] wlp3s0: deauthenticating from 8c:a6:df:b3:06:7e by local choice (Reason: 3=DEAUTH_LEAVING) [58272.415086] PM: Syncing filesystems ... done. [58272.587945] PM: Preparing system for sleep (mem) [58272.590043] Freezing user space processes ... (elapsed 0.038 seconds) done. [58272.628767] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [58272.628932] Freezing remaining freezable tasks ... (elapsed 0.107 seconds) done. [58272.736645] PM: Suspending system (mem) [58272.736710] Suspending console(s) (use no_console_suspend to debug) [58272.953663] sd 1:0:0:0: [sda] Synchronizing SCSI cache [58272.953799] sd 1:0:0:0: [sda] Stopping disk [58272.965666] e1000e: EEE TX LPI TIMER: 00000011 [58273.986104] PM: suspend of devices complete after 1033.342 msecs [58274.012738] PM: late suspend of devices complete after 26.615 msecs [58274.014505] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [58274.015620] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [58274.052235] PM: noirq suspend of devices complete after 39.481 msecs [58274.053013] ACPI: Preparing to enter system sleep state S3 [58274.380221] ACPI : EC: EC stopped [58274.380222] PM: Saving platform NVS memory [58274.380230] Disabling non-boot CPUs ... [58274.380929] Broke affinity for irq 279 [58274.382080] smpboot: CPU 1 is now offline [58274.397485] Broke affinity for irq 123 [58274.397491] Broke affinity for irq 124 [58274.397541] Broke affinity for irq 279 [58274.397545] Broke affinity for irq 281 [58274.399448] smpboot: CPU 2 is now offline [58274.425223] Broke affinity for irq 1 [58274.425230] Broke affinity for irq 8 [58274.425234] Broke affinity for irq 9 [58274.425238] Broke affinity for irq 12 [58274.425243] Broke affinity for irq 14 [58274.425247] Broke affinity for irq 16 [58274.425251] Broke affinity for irq 17 [58274.425261] Broke affinity for irq 122 [58274.425265] Broke affinity for irq 123 [58274.425269] Broke affinity for irq 124 [58274.425302] Broke affinity for irq 277 [58274.425307] Broke affinity for irq 279 [58274.425311] Broke affinity for irq 281 [58274.426406] smpboot: CPU 3 is now offline [58274.444403] ACPI: Low-level resume complete [58274.444403] ACPI : EC: EC started [58274.444403] PM: Restoring platform NVS memory [58274.444403] Enabling non-boot CPUs ... [58274.468246] x86: Booting SMP configuration: [58274.468246] smpboot: Booting Node 0 Processor 1 APIC 0x2 [58274.469908] cache: parent cpu1 should not be sleeping [58274.470074] CPU1 is up [58274.496407] smpboot: Booting Node 0 Processor 2 APIC 0x1 [58274.497664] cache: parent cpu2 should not be sleeping [58274.498077] CPU2 is up [58274.528536] smpboot: Booting Node 0 Processor 3 APIC 0x3 [58274.529826] cache: parent cpu3 should not be sleeping [58274.530303] CPU3 is up [58274.538553] ACPI: Waking up from system sleep state S3 [58274.724666] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [58274.724806] PM: noirq resume of devices complete after 38.948 msecs [58274.740085] PM: early resume of devices complete after 15.153 msecs [58274.740663] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [58274.741466] sd 1:0:0:0: [sda] Starting disk [58274.744449] rtc_cmos 00:03: System wakeup disabled by ACPI [58274.747185] [drm] GuC firmware load skipped [58274.792064] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [58274.792064] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [58274.792064] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [58275.052548] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [58275.052851] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [58275.052852] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [58275.052854] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [58275.053091] ata2.00: supports DRM functions and may not be fully accessible [58275.054450] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [58275.054451] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [58275.054452] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [58275.054679] ata2.00: supports DRM functions and may not be fully accessible [58275.055578] ata2.00: configured for UDMA/133 [58275.081047] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [58275.340566] usb 1-7: reset full-speed USB device number 5 using xhci_hcd [58275.600586] usb 1-4: reset full-speed USB device number 4 using xhci_hcd [58275.758094] PM: resume of devices complete after 1017.993 msecs [58275.758387] usb 1-7:1.0: rebind failed: -517 [58275.758392] usb 1-7:1.1: rebind failed: -517 [58275.758801] PM: Finishing wakeup. [58275.758803] Restarting tasks ... done. [58275.794809] Bluetooth: hci0: read Intel version: 370810011003110e00 [58275.794847] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [58275.836276] [drm] RC6 on [58276.110485] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [58277.960402] e1000e: enp0s31f6 NIC Link is Down [58277.961512] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [58277.963757] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [58277.963943] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [58278.030843] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [58278.031099] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [58278.048833] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [58278.053650] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [58278.248836] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [58278.346364] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [58282.828090] wlp3s0: authenticate with 8c:a6:df:b3:06:7e [58282.831563] wlp3s0: send auth to 8c:a6:df:b3:06:7e (try 1/3) [58282.837733] wlp3s0: authenticated [58282.840044] wlp3s0: associate with 8c:a6:df:b3:06:7e (try 1/3) [58282.844274] wlp3s0: RX AssocResp from 8c:a6:df:b3:06:7e (capab=0x431 status=0 aid=14) [58282.848271] wlp3s0: associated [58282.848306] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [58283.840439] systemd[1]: snapd.refresh.timer: Adding 3h 9min 45.833311s random time. [58284.328866] systemd[1]: snapd.refresh.timer: Adding 3h 54min 8.197045s random time. [58338.275982] systemd[1]: snapd.refresh.timer: Adding 7min 35.981584s random time. [58392.937629] systemd[1]: snapd.refresh.timer: Adding 4h 30min 18.446999s random time. [58394.019843] systemd[1]: snapd.refresh.timer: Adding 4h 53min 31.605514s random time. [58395.197235] systemd[1]: snapd.refresh.timer: Adding 25min 35.260656s random time. [58517.448120] usb 1-2.1: new high-speed USB device number 51 using xhci_hcd [58517.552147] usb 1-2.1: New USB device found, idVendor=0951, idProduct=1625 [58517.552155] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [58517.552160] usb 1-2.1: Product: DT101 II [58517.552164] usb 1-2.1: Manufacturer: Kingston [58517.552168] usb 1-2.1: SerialNumber: 001CC0EC3519F04127E4155C [58517.553647] usb-storage 1-2.1:1.0: USB Mass Storage device detected [58517.555507] scsi host2: usb-storage 1-2.1:1.0 [58518.557349] scsi 2:0:0:0: Direct-Access Kingston DT101 II 1.00 PQ: 0 ANSI: 2 [58518.558448] sd 2:0:0:0: Attached scsi generic sg1 type 0 [58518.560352] sd 2:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.01 GB/7.46 GiB) [58518.560592] sd 2:0:0:0: [sdb] Write Protect is off [58518.560597] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [58518.560803] sd 2:0:0:0: [sdb] No Caching mode page found [58518.560813] sd 2:0:0:0: [sdb] Assuming drive cache: write through [58518.562727] sdb: sdb4 [58518.563929] sd 2:0:0:0: [sdb] Attached SCSI removable disk [58518.990495] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [58537.426938] systemd[1]: snapd.refresh.timer: Adding 38min 51.545704s random time. [58569.628185] usb 1-2.1: USB disconnect, device number 51 [58596.496255] systemd[1]: snapd.refresh.timer: Adding 2h 3min 59.109733s random time. [58610.684326] systemd[1]: snapd.refresh.timer: Adding 1h 48min 54.167741s random time. [58610.854413] systemd[1]: snapd.refresh.timer: Adding 5h 30min 10.669994s random time. [58611.021197] systemd[1]: snapd.refresh.timer: Adding 1min 6.882413s random time. [58660.705901] systemd[1]: snapd.refresh.timer: Adding 3h 38min 40.116956s random time. [58660.863999] systemd[1]: snapd.refresh.timer: Adding 1h 14min 48.984415s random time. [58661.032297] systemd[1]: snapd.refresh.timer: Adding 2h 36min 47.661513s random time. [58661.222891] systemd[1]: snapd.refresh.timer: Adding 4h 8min 37.429205s random time. [58661.352144] systemd: 37 output lines suppressed due to ratelimiting