[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-59-generic (buildd@lgw01-37) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #80-Ubuntu SMP Fri Jan 6 17:36:54 UTC 2017 (Ubuntu 4.4.0-59.80-generic 4.4.35) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7d8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7d90000-0x00000000b7d9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b7d9e000-0x00000000b7ddffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b7de0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed010ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed02000-0x00000000fed14bff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Acer Aspire X3810/WG43M, BIOS P01-A3 05/26/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 base 0B7E00000 mask FFFE00000 uncachable [ 0.000000] 4 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 1GB, type UC [ 0.000000] reg 3, base: 2942MB, range: 2MB, type UC [ 0.000000] reg 4, base: 2944MB, range: 128MB, type UC [ 0.000000] total RAM covered: 3966M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 2942MB, range: 2MB, type UC [ 0.000000] reg 3, base: 2944MB, range: 128MB, type UC [ 0.000000] reg 4, base: 4GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xb7e00000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] BRK [0x01d5e000, 0x01d5efff] PGTABLE [ 0.000000] BRK [0x01d5f000, 0x01d5ffff] PGTABLE [ 0.000000] RAMDISK: [mem 0x338ce000-0x35c5efff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FA770 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x00000000B7D90100 00006C (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000B7D90290 0000F4 (v04 052609 FACP2056 20090526 MSFT 00000097) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20150930/tbfadt-623) [ 0.000000] ACPI: DSDT 0x00000000B7D905C0 0061D5 (v02 P01- P01-A3 000000A3 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000B7D9E000 000040 [ 0.000000] ACPI: FACS 0x00000000B7D9E000 000040 [ 0.000000] ACPI: APIC 0x00000000B7D90390 00006C (v02 052609 APIC2056 20090526 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000B7D90400 00003C (v01 052609 OEMMCFG 20090526 MSFT 00000097) [ 0.000000] ACPI: SLIC 0x00000000B7D90440 000176 (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000B7D9E040 000072 (v01 052609 OEMB2056 20090526 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000B7D9A5C0 000038 (v01 052609 OEMHPET 20090526 MSFT 00000097) [ 0.000000] ACPI: GSCI 0x00000000B7D9E0C0 002024 (v01 052609 GMCHSCI 20090526 MSFT 00000097) [ 0.000000] ACPI: AWMI 0x00000000B7DA00F0 00004E (v01 052609 OEMB2056 20090526 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000B7DA0640 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4228MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff] [ 0.000000] HighMem [mem 0x0000000037bfe000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7d8ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.000000] On node 0 totalpages: 1015085 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 2190 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 786834 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Reserving Intel graphics stolen memory at 0xb8000000-0xbfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0xc0000000-0xfecfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 19 pages/cpu @f5d8b000 s47436 r0 d30388 u77824 [ 0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1012855 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=d9ed5864-2a8c-48bd-b7ed-7af7c75898e1 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00037bfe:00140000) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 3967932K/4060340K available (7914K kernel code, 765K rwdata, 3148K rodata, 944K init, 800K bss, 92408K reserved, 0K cma-reserved, 3147336K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) .init : 0xc1b91000 - 0xc1c7d000 ( 944 kB) .data : 0xc17bacfb - 0xc1b8f400 (3921 kB) .text : 0xc1000000 - 0xc17bacfb (7915 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:2304 nr_irqs:456 16 [ 0.000000] CPU 0 irqstacks, hard=f2838000 soft=f283a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 4194304 bytes of page_ext [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2493.849 MHz processor [ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.69 BogoMIPS (lpj=9975396) [ 0.004017] pid_max: default: 32768 minimum: 301 [ 0.004029] ACPI: Core revision 20150930 [ 0.013052] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.013073] Security Framework initialized [ 0.013076] Yama: becoming mindful. [ 0.013100] AppArmor: AppArmor initialized [ 0.013139] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.013141] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.013393] Initializing cgroup subsys io [ 0.013398] Initializing cgroup subsys memory [ 0.013406] Initializing cgroup subsys devices [ 0.013410] Initializing cgroup subsys freezer [ 0.013414] Initializing cgroup subsys net_cls [ 0.013417] Initializing cgroup subsys perf_event [ 0.013420] Initializing cgroup subsys net_prio [ 0.013425] Initializing cgroup subsys hugetlb [ 0.013427] Initializing cgroup subsys pids [ 0.013450] CPU: Physical Processor ID: 0 [ 0.013451] CPU: Processor Core ID: 0 [ 0.013457] mce: CPU supports 6 MCE banks [ 0.013466] CPU0: Thermal monitoring enabled (TM2) [ 0.013470] process: using mwait in idle threads [ 0.013479] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.013480] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.014051] Freeing SMP alternatives memory: 28K (c1c7d000 - c1c84000) [ 0.016006] ftrace: allocating 31349 entries in 62 pages [ 0.028098] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.028102] smpboot: Max logical packages: 2 [ 0.028105] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028473] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072000] APIC calibration not consistent with PM-Timer: 135ms instead of 100ms [ 0.072000] APIC delta adjusted to PM-Timer: 1247014 (1695921) [ 0.072000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072000] ... version: 2 [ 0.072000] ... bit width: 40 [ 0.072000] ... generic registers: 2 [ 0.072000] ... value mask: 000000ffffffffff [ 0.072000] ... max period: 000000007fffffff [ 0.072000] ... fixed-purpose events: 3 [ 0.072000] ... event mask: 0000000700000003 [ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072000] CPU 1 irqstacks, hard=f21c6000 soft=f21c8000 [ 0.072000] x86: Booting SMP configuration: [ 0.072000] .... node #0, CPUs: #1 [ 0.008000] Initializing CPU#1 [ 0.072000] x86: Booted up 1 node, 2 CPUs [ 0.072000] smpboot: Total of 2 processors activated (9975.39 BogoMIPS) [ 0.072110] devtmpfs: initialized [ 0.072427] evm: security.selinux [ 0.072428] evm: security.SMACK64 [ 0.072430] evm: security.SMACK64EXEC [ 0.072431] evm: security.SMACK64TRANSMUTE [ 0.072432] evm: security.SMACK64MMAP [ 0.072433] evm: security.ima [ 0.072434] evm: security.capability [ 0.072541] PM: Registering ACPI NVS region [mem 0xb7d9e000-0xb7ddffff] (270336 bytes) [ 0.072635] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.072675] pinctrl core: initialized pinctrl subsystem [ 0.072675] RTC time: 15:12:17, date: 01/26/17 [ 0.072675] NET: Registered protocol family 16 [ 0.072675] EISA bus registered [ 0.080006] cpuidle: using governor ladder [ 0.092008] cpuidle: using governor menu [ 0.092015] PCCT header not found. [ 0.092196] ACPI: bus type PCI registered [ 0.092199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.092271] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.092273] PCI: not using MMCONFIG [ 0.092594] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.092656] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2 [ 0.092658] PCI: Using configuration type 1 for base access [ 0.104100] ACPI: Added _OSI(Module Device) [ 0.104102] ACPI: Added _OSI(Processor Device) [ 0.104104] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.104105] ACPI: Added _OSI(Processor Aggregator Device) [ 0.106037] ACPI: Executed 1 blocks of module-level executable AML code [ 0.108661] ACPI: Dynamic OEM Table Load: [ 0.108667] ACPI: SSDT 0x00000000F213E400 000277 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.109139] ACPI: Dynamic OEM Table Load: [ 0.109144] ACPI: SSDT 0x00000000F213E800 000277 (v01 DpgPmm P002Ist 00000012 INTL 20051117) [ 0.109566] ACPI: Interpreter enabled [ 0.109586] ACPI: (supports S0 S3 S4 S5) [ 0.109587] ACPI: Using IOAPIC for interrupt routing [ 0.109619] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.110710] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.110712] PCI: Using MMCONFIG for extended config space [ 0.110717] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.117145] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.117151] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.117156] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.117437] PCI host bridge to bus 0000:00 [ 0.117440] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.117442] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.117444] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.117447] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.117449] pci_bus 0000:00: root bus resource [mem 0xb7e00000-0xdfffffff window] [ 0.117451] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window] [ 0.117453] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.117463] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000 [ 0.117490] DMAR: Forcing write-buffer flush capability [ 0.117492] DMAR: Disabling IOMMU for graphics on this chipset [ 0.117582] pci 0000:00:02.0: [8086:2e22] type 00 class 0x030000 [ 0.117599] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit] [ 0.117606] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.117612] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07] [ 0.117719] pci 0000:00:02.1: [8086:2e23] type 00 class 0x038000 [ 0.117732] pci 0000:00:02.1: reg 0x10: [mem 0xfe900000-0xfe9fffff 64bit] [ 0.117866] pci 0000:00:19.0: [8086:10ce] type 00 class 0x020000 [ 0.117891] pci 0000:00:19.0: reg 0x10: [mem 0xfeac0000-0xfeadffff] [ 0.117900] pci 0000:00:19.0: reg 0x14: [mem 0xfeafa000-0xfeafafff] [ 0.117908] pci 0000:00:19.0: reg 0x18: [io 0xd880-0xd89f] [ 0.117957] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.118009] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.118059] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.118105] pci 0000:00:1a.0: reg 0x20: [io 0xd800-0xd81f] [ 0.118189] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.118242] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.118288] pci 0000:00:1a.1: reg 0x20: [io 0xd480-0xd49f] [ 0.118372] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.118424] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.118470] pci 0000:00:1a.2: reg 0x20: [io 0xd400-0xd41f] [ 0.118554] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.118612] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.118641] pci 0000:00:1a.7: reg 0x10: [mem 0xfeaf8000-0xfeaf83ff] [ 0.118713] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.118766] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.118820] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.118846] pci 0000:00:1b.0: reg 0x10: [mem 0xfeaf0000-0xfeaf3fff 64bit] [ 0.118907] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.119005] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.119074] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.119129] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.119188] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.119234] pci 0000:00:1d.0: reg 0x20: [io 0xd080-0xd09f] [ 0.119318] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.119371] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.119417] pci 0000:00:1d.1: reg 0x20: [io 0xd000-0xd01f] [ 0.119503] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.119557] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.119603] pci 0000:00:1d.2: reg 0x20: [io 0xcc00-0xcc1f] [ 0.119688] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.119744] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.119772] pci 0000:00:1d.7: reg 0x10: [mem 0xfeaee000-0xfeaee3ff] [ 0.119845] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.119896] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.119947] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.120038] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.120091] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100 [ 0.120274] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 [ 0.120299] pci 0000:00:1f.2: reg 0x10: [io 0xc880-0xc887] [ 0.120307] pci 0000:00:1f.2: reg 0x14: [io 0xc800-0xc803] [ 0.120315] pci 0000:00:1f.2: reg 0x18: [io 0xc480-0xc487] [ 0.120323] pci 0000:00:1f.2: reg 0x1c: [io 0xc400-0xc403] [ 0.120330] pci 0000:00:1f.2: reg 0x20: [io 0xc080-0xc09f] [ 0.120339] pci 0000:00:1f.2: reg 0x24: [mem 0xfeaec000-0xfeaec7ff] [ 0.120371] pci 0000:00:1f.2: PME# supported from D3hot [ 0.120464] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.120481] pci 0000:00:1f.3: reg 0x10: [mem 0xfeaebc00-0xfeaebcff 64bit] [ 0.120502] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.120659] pci 0000:01:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.120701] pci 0000:01:00.0: reg 0x10: [mem 0xfebff800-0xfebfffff 64bit] [ 0.120713] pci 0000:01:00.0: reg 0x18: [io 0xe800-0xe8ff] [ 0.120799] pci 0000:01:00.0: supports D2 [ 0.120801] pci 0000:01:00.0: PME# supported from D2 D3hot D3cold [ 0.128027] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.128034] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.128041] pci 0000:00:1c.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.128167] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) [ 0.128176] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.128179] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.128181] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.128183] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.128186] pci 0000:00:1e.0: bridge window [mem 0xb7e00000-0xdfffffff window] (subtractive decode) [ 0.128188] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode) [ 0.128199] pci_bus 0000:00: on NUMA node 0 [ 0.128959] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.129021] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.129078] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.129137] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.129197] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.129257] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.129317] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.129376] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15) [ 0.129469] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.129584] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.129584] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.129584] vgaarb: loaded [ 0.129584] vgaarb: bridge control possible 0000:00:02.0 [ 0.129584] SCSI subsystem initialized [ 0.129584] libata version 3.00 loaded. [ 0.129584] ACPI: bus type USB registered [ 0.129584] usbcore: registered new interface driver usbfs [ 0.129584] usbcore: registered new interface driver hub [ 0.129584] usbcore: registered new device driver usb [ 0.129584] PCI: Using ACPI for IRQ routing [ 0.129584] PCI: pci_cache_line_size set to 64 bytes [ 0.129584] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.129584] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.129584] e820: reserve RAM buffer [mem 0xb7d90000-0xb7ffffff] [ 0.129584] NetLabel: Initializing [ 0.129584] NetLabel: domain hash size = 128 [ 0.129584] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.129584] NetLabel: unlabeled traffic allowed by default [ 0.129584] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.129584] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.129584] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.132013] amd_nb: Cannot enumerate AMD northbridges [ 0.132023] clocksource: Switched to clocksource hpet [ 0.141645] AppArmor: AppArmor Filesystem Enabled [ 0.141744] pnp: PnP ACPI init [ 0.141854] system 00:00: [mem 0xfed14000-0xfed19fff] could not be reserved [ 0.141857] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.141861] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.141941] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.142033] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.142416] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.142419] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.142422] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.142424] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.142428] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.142591] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.142594] system 00:04: [io 0x0800-0x087f] could not be reserved [ 0.142596] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.142599] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.142602] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.142604] system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.142607] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.142718] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved [ 0.142722] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.142841] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.142844] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.142848] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.142933] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.142936] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143136] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.143140] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.143142] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.143145] system 00:08: [mem 0x00100000-0xb7dfffff] could not be reserved [ 0.143147] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.143151] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.143286] pnp: PnP ACPI: found 9 devices [ 0.143291] PnPBIOS: Disabled by ACPI PNP [ 0.180325] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.180344] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.180356] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.180358] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.180369] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.180372] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.180376] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.180381] pci 0000:00:1c.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.180384] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.180390] pci 0000:00:1e.0: PCI bridge to [bus 02] [ 0.180401] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.180404] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.180406] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.180408] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.180410] pci_bus 0000:00: resource 8 [mem 0xb7e00000-0xdfffffff window] [ 0.180413] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window] [ 0.180415] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.180417] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.180419] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.180422] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window] [ 0.180424] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window] [ 0.180426] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.180428] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.180430] pci_bus 0000:02: resource 8 [mem 0xb7e00000-0xdfffffff window] [ 0.180433] pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfed8ffff window] [ 0.180466] NET: Registered protocol family 2 [ 0.180659] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.180677] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.180703] TCP: Hash tables configured (established 8192 bind 8192) [ 0.180739] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.180748] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.180794] NET: Registered protocol family 1 [ 0.180811] pci 0000:00:02.0: Video device with shadowed ROM [ 0.181951] PCI: CLS 32 bytes, default 64 [ 0.182007] Trying to unpack rootfs image as initramfs... [ 0.843811] Freeing initrd memory: 36420K (f38ce000 - f5c5f000) [ 0.844108] Scanning for low memory corruption every 60 seconds [ 0.844543] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.844598] audit: initializing netlink subsys (disabled) [ 0.844621] audit: type=2000 audit(1485443537.844:1): initialized [ 0.844982] Initialise system trusted keyring [ 0.845108] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.847216] zbud: loaded [ 0.847327] VFS: Disk quotas dquot_6.6.0 [ 0.847376] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.847696] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.847985] fuse init (API version 7.23) [ 0.848181] Key type big_key registered [ 0.848200] Allocating IMA MOK and blacklist keyrings. [ 0.848569] Key type asymmetric registered [ 0.848572] Asymmetric key parser 'x509' registered [ 0.848589] bounce: pool size: 64 pages [ 0.848635] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.848669] io scheduler noop registered [ 0.848673] io scheduler deadline registered (default) [ 0.848718] io scheduler cfq registered [ 0.849064] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.849073] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.849110] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 0.849112] vesafb: scrolling: redraw [ 0.849114] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.849130] vesafb: framebuffer at 0xd0000000, mapped to 0xf8600000, using 5120k, total 5120k [ 0.849253] Console: switching to colour frame buffer device 160x64 [ 0.849289] fb0: VESA VGA frame buffer device [ 0.849307] intel_idle: does not run on family 6 model 23 [ 0.849398] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.849403] ACPI: Power Button [PWRB] [ 0.849458] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.849460] ACPI: Power Button [PWRF] [ 0.850148] GHES: HEST is not enabled! [ 0.850175] isapnp: Scanning for PnP cards... [ 0.852042] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.853955] Linux agpgart interface v0.103 [ 0.854044] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset [ 0.854063] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.854545] agpgart-intel 0000:00:00.0: detected 131072K stolen memory [ 0.854669] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.862935] brd: module loaded [ 0.864391] loop: module loaded [ 0.864677] libphy: Fixed MDIO Bus: probed [ 0.864680] tun: Universal TUN/TAP device driver, 1.6 [ 0.864682] tun: (C) 1999-2004 Max Krasnyansky [ 0.864729] PPP generic driver version 2.4.2 [ 0.864801] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.864806] ehci-pci: EHCI PCI platform driver [ 0.864955] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.864962] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.864975] ehci-pci 0000:00:1a.7: debug port 1 [ 0.868887] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 0.868905] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfeaf8000 [ 0.880014] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.880073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.880076] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.880078] usb usb1: Product: EHCI Host Controller [ 0.880080] usb usb1: Manufacturer: Linux 4.4.0-59-generic ehci_hcd [ 0.880082] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.880209] hub 1-0:1.0: USB hub found [ 0.880217] hub 1-0:1.0: 6 ports detected [ 0.880484] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.880490] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.880500] ehci-pci 0000:00:1d.7: debug port 1 [ 0.884389] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.884403] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeaee000 [ 0.896014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.896048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.896050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.896052] usb usb2: Product: EHCI Host Controller [ 0.896054] usb usb2: Manufacturer: Linux 4.4.0-59-generic ehci_hcd [ 0.896056] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.896172] hub 2-0:1.0: USB hub found [ 0.896179] hub 2-0:1.0: 6 ports detected [ 0.896361] ehci-platform: EHCI generic platform driver [ 0.896375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.896380] ohci-pci: OHCI PCI platform driver [ 0.896394] ohci-platform: OHCI generic platform driver [ 0.896405] uhci_hcd: USB Universal Host Controller Interface driver [ 0.896493] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.896499] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.896505] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.896528] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d800 [ 0.896575] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.896577] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.896579] usb usb3: Product: UHCI Host Controller [ 0.896581] usb usb3: Manufacturer: Linux 4.4.0-59-generic uhci_hcd [ 0.896583] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.896700] hub 3-0:1.0: USB hub found [ 0.896707] hub 3-0:1.0: 2 ports detected [ 0.896893] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.896898] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.896904] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.896927] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d480 [ 0.896973] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.896975] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.896977] usb usb4: Product: UHCI Host Controller [ 0.896979] usb usb4: Manufacturer: Linux 4.4.0-59-generic uhci_hcd [ 0.896981] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.897098] hub 4-0:1.0: USB hub found [ 0.897104] hub 4-0:1.0: 2 ports detected [ 0.897287] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.897292] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.897299] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.897322] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d400 [ 0.897372] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.897375] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.897377] usb usb5: Product: UHCI Host Controller [ 0.897379] usb usb5: Manufacturer: Linux 4.4.0-59-generic uhci_hcd [ 0.897381] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.897504] hub 5-0:1.0: USB hub found [ 0.897510] hub 5-0:1.0: 2 ports detected [ 0.897690] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.897696] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.897701] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.897718] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080 [ 0.897764] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.897766] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.897768] usb usb6: Product: UHCI Host Controller [ 0.897770] usb usb6: Manufacturer: Linux 4.4.0-59-generic uhci_hcd [ 0.897772] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.897889] hub 6-0:1.0: USB hub found [ 0.897896] hub 6-0:1.0: 2 ports detected [ 0.898069] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.898075] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.898081] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.898098] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000 [ 0.898142] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.898144] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.898146] usb usb7: Product: UHCI Host Controller [ 0.898148] usb usb7: Manufacturer: Linux 4.4.0-59-generic uhci_hcd [ 0.898150] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.898264] hub 7-0:1.0: USB hub found [ 0.898271] hub 7-0:1.0: 2 ports detected [ 0.898448] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.898453] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.898459] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.898477] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cc00 [ 0.898522] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.898525] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.898527] usb usb8: Product: UHCI Host Controller [ 0.898529] usb usb8: Manufacturer: Linux 4.4.0-59-generic uhci_hcd [ 0.898530] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.898645] hub 8-0:1.0: USB hub found [ 0.898652] hub 8-0:1.0: 2 ports detected [ 0.898828] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 0.898830] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 0.899212] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.899218] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.904076] mousedev: PS/2 mouse device common for all mice [ 0.904225] rtc_cmos 00:01: RTC can wake from S4 [ 0.904351] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.904373] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.904384] i2c /dev entries driver [ 0.904452] device-mapper: uevent: version 1.0.3 [ 0.904529] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.904561] platform eisa.0: Probing EISA bus 0 [ 0.904564] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.904566] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.904568] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.904570] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.904572] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.904574] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.904576] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.904578] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.904580] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.904582] platform eisa.0: EISA: Detected 0 cards [ 0.904596] cpufreq-nforce2: No nForce2 chipset. [ 0.904606] ledtrig-cpu: registered to indicate activity on CPUs [ 0.904935] NET: Registered protocol family 10 [ 0.905199] NET: Registered protocol family 17 [ 0.905211] Key type dns_resolver registered [ 0.905455] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07 [ 0.905462] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07 [ 0.905501] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.905514] Using IPI No-Shortcut mode [ 0.905672] registered taskstats version 1 [ 0.905689] Loading compiled-in X.509 certificates [ 0.908979] Loaded X.509 cert 'Build time autogenerated kernel key: 5abddad4aa185bb4ac78f1f130c188cbdfc4c5fc' [ 0.908997] zswap: loaded using pool lzo/zbud [ 0.913914] Key type trusted registered [ 0.922991] Key type encrypted registered [ 0.922997] AppArmor: AppArmor sha1 policy hashing enabled [ 0.923001] ima: No TPM chip found, activating TPM-bypass! [ 0.923028] evm: HMAC attrs: 0x1 [ 0.923310] Magic number: 1:681:235 [ 0.923404] rtc_cmos 00:01: setting system clock to 2017-01-26 15:12:18 UTC (1485443538) [ 0.924138] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.924140] EDD information not available. [ 0.924217] PM: Hibernation image not present or could not be loaded. [ 1.159879] isapnp: No Plug & Play device found [ 1.160218] Freeing unused kernel memory: 944K (c1b91000 - c1c7d000) [ 1.160287] Write protecting the kernel text: 7916k [ 1.160322] Write protecting the kernel read-only data: 3156k [ 1.160324] NX-protecting the kernel data: 6420k [ 1.172750] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 1.172822] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 1.173027] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 1.173116] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 1.173202] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 1.173287] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 1.173311] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 1.173364] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 1.173424] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 1.173444] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 1.208042] usb 2-4: new high-speed USB device number 2 using ehci-pci [ 1.212366] pps_core: LinuxPPS API ver. 1 registered [ 1.212369] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.216527] PTP clock support registered [ 1.227088] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.227091] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.227293] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.236577] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.243266] [drm] Initialized drm 1.1.0 20060810 [ 1.247832] wmi: Mapper loaded [ 1.336026] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 1.351946] usb 2-4: New USB device found, idVendor=058f, idProduct=6331 [ 1.351950] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.351952] usb 2-4: Product: Mass Storage Device [ 1.351954] usb 2-4: Manufacturer: Generic [ 1.351956] usb 2-4: SerialNumber: 6333031111B1 [ 1.376067] firewire_ohci 0000:01:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.446283] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:f4:95:25 [ 1.446286] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.446316] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF [ 1.446344] ahci 0000:00:1f.2: version 3.0 [ 1.446543] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.446578] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.446581] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 1.464024] usb 2-6: new high-speed USB device number 3 using ehci-pci [ 1.484921] scsi host0: ahci [ 1.485043] scsi host1: ahci [ 1.485144] scsi host2: ahci [ 1.485251] scsi host3: ahci [ 1.485357] scsi host4: ahci [ 1.485509] scsi host5: ahci [ 1.485581] ata1: SATA max UDMA/133 abar m2048@0xfeaec000 port 0xfeaec100 irq 26 [ 1.485584] ata2: SATA max UDMA/133 abar m2048@0xfeaec000 port 0xfeaec180 irq 26 [ 1.485587] ata3: SATA max UDMA/133 abar m2048@0xfeaec000 port 0xfeaec200 irq 26 [ 1.485589] ata4: SATA max UDMA/133 abar m2048@0xfeaec000 port 0xfeaec280 irq 26 [ 1.485591] ata5: SATA max UDMA/133 abar m2048@0xfeaec000 port 0xfeaec300 irq 26 [ 1.485593] ata6: SATA max UDMA/133 abar m2048@0xfeaec000 port 0xfeaec380 irq 26 [ 1.486197] [drm] Memory usable by graphics device = 2048M [ 1.486201] checking generic (d0000000 500000) vs hw (d0000000 10000000) [ 1.486203] fb: switching to inteldrmfb from VESA VGA [ 1.486238] Console: switching to colour dummy device 80x25 [ 1.486295] [drm] Replacing VGA console driver [ 1.492099] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.492103] [drm] Driver supports precise vblank timestamp query. [ 1.492922] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.557038] usb 4-1: New USB device found, idVendor=1a2c, idProduct=0002 [ 1.557045] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.557049] usb 4-1: Product: USB Keykoard [ 1.557054] usb 4-1: Manufacturer: USB [ 1.598325] usb 2-6: New USB device found, idVendor=058f, idProduct=6363 [ 1.598331] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.598335] usb 2-6: Product: Mass Storage Device [ 1.598339] usb 2-6: Manufacturer: Generic [ 1.598344] usb 2-6: SerialNumber: 058F63636476 [ 1.607317] hidraw: raw HID events driver (C) Jiri Kosina [ 1.612497] fbcon: inteldrmfb (fb0) is primary device [ 1.612586] Console: switching to colour frame buffer device 210x65 [ 1.612637] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.614358] usb-storage 2-4:1.0: USB Mass Storage device detected [ 1.614429] scsi host6: usb-storage 2-4:1.0 [ 1.614621] usb-storage 2-6:1.0: USB Mass Storage device detected [ 1.614689] scsi host7: usb-storage 2-6:1.0 [ 1.614876] usbcore: registered new interface driver usb-storage [ 1.619071] usbcore: registered new interface driver uas [ 1.636039] usb 5-2: new low-speed USB device number 2 using uhci_hcd [ 1.643645] usbcore: registered new interface driver usbhid [ 1.643647] usbhid: USB HID core driver [ 1.648096] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:1A2C:0002.0001/input/input5 [ 1.652120] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 1.704189] hid-generic 0003:1A2C:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.1-1/input0 [ 1.704681] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:1A2C:0002.0002/input/input6 [ 1.760179] hid-generic 0003:1A2C:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.1-1/input1 [ 1.760834] hid-generic 0003:058F:6363.0003: hiddev0,hidraw2: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.7-6/input1 [ 1.800025] usb 4-2: new full-speed USB device number 3 using uhci_hcd [ 1.804042] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.807059] ata1.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100 [ 1.810927] ata1.00: configured for UDMA/100 [ 1.811975] usb 5-2: New USB device found, idVendor=413c, idProduct=3012 [ 1.811981] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.811986] usb 5-2: Product: Dell USB Optical Mouse [ 1.811990] usb 5-2: Manufacturer: Dell [ 1.818555] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH40F MG01 PQ: 0 ANSI: 5 [ 1.828821] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:413C:3012.0004/input/input7 [ 1.828941] hid-generic 0003:413C:3012.0004: input,hidraw3: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.2-2/input0 [ 1.839743] sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.839749] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.839966] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.840043] tsc: Refined TSC clocksource calibration: 2494.030 MHz [ 1.840047] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3324d584, max_idle_ns: 440795268455 ns [ 1.840060] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.876159] firewire_core 0000:01:00.0: created device fw0: GUID 001d72ffae785cff, S400 [ 2.054040] usb 4-2: New USB device found, idVendor=04a8, idProduct=0303 [ 2.054047] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.068124] hub 4-2:1.0: USB hub found [ 2.095039] hub 4-2:1.0: 5 ports detected [ 2.160028] ata2: SATA link down (SStatus 0 SControl 300) [ 2.480028] ata3: SATA link down (SStatus 0 SControl 300) [ 2.612980] scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [ 2.613009] scsi 7:0:0:0: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 2.613330] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 2.614411] scsi 7:0:0:1: Direct-Access Multiple Flash Reader 1.05 PQ: 0 ANSI: 0 [ 2.614695] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 2.614889] sd 7:0:0:1: Attached scsi generic sg3 type 0 [ 2.620034] usb 4-2.1: new full-speed USB device number 4 using uhci_hcd [ 2.800033] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.817719] ata4.00: ATA-8: Hitachi HDT721032SLA380, ST2OA31B, max UDMA/133 [ 2.817725] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.818754] ata4.00: configured for UDMA/133 [ 2.818942] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72103 A31B PQ: 0 ANSI: 5 [ 2.819179] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 2.819259] sd 3:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.819308] sd 3:0:0:0: [sdd] Write Protect is off [ 2.819311] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.819332] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.840080] clocksource: Switched to clocksource tsc [ 2.880038] usb 4-2.1: New USB device found, idVendor=04a8, idProduct=0404 [ 2.880044] usb 4-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.885347] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 > [ 2.885863] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.971215] sd 6:0:0:0: [sda] 63700992 512-byte logical blocks: (32.6 GB/30.4 GiB) [ 2.972334] sd 6:0:0:0: [sda] Write Protect is off [ 2.972340] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 2.973460] sd 6:0:0:0: [sda] No Caching mode page found [ 2.973466] sd 6:0:0:0: [sda] Assuming drive cache: write through [ 2.978845] sda: sda1 [ 2.982838] sd 6:0:0:0: [sda] Attached SCSI removable disk [ 3.136030] ata5: SATA link down (SStatus 0 SControl 300) [ 3.456026] ata6: SATA link down (SStatus 0 SControl 300) [ 3.645201] hid-generic 0003:04A8:0404.0005: hiddev0,hidraw4: USB HID v1.00 Device [HID 04a8:0404] on usb-0000:00:1a.1-2.1/input0 [ 3.776022] usb 4-2.2: new full-speed USB device number 5 using uhci_hcd [ 3.876590] sd 7:0:0:0: [sdb] 8027712 512-byte logical blocks: (4.11 GB/3.83 GiB) [ 3.876961] sd 7:0:0:1: [sdc] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB) [ 3.877964] sd 7:0:0:0: [sdb] Write Protect is off [ 3.877967] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 3.878958] sd 7:0:0:1: [sdc] Write Protect is off [ 3.878964] sd 7:0:0:1: [sdc] Mode Sense: 03 00 00 00 [ 3.879959] sd 7:0:0:0: [sdb] No Caching mode page found [ 3.879965] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 3.880967] sd 7:0:0:1: [sdc] No Caching mode page found [ 3.880970] sd 7:0:0:1: [sdc] Assuming drive cache: write through [ 3.890348] sdb: sdb1 [ 3.900099] sdc: sdc1 [ 3.904592] sd 7:0:0:1: [sdc] Attached SCSI removable disk [ 3.906838] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 3.918038] usb 4-2.2: not running at top speed; connect to a high speed hub [ 3.952037] usb 4-2.2: New USB device found, idVendor=04e8, idProduct=344f [ 3.952044] usb 4-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.952048] usb 4-2.2: Product: SCX-3400 Series [ 3.952053] usb 4-2.2: Manufacturer: Samsung Electronics Co., Ltd. [ 3.952057] usb 4-2.2: SerialNumber: Z8BNB8KD5B000MM [ 4.084045] usb 4-2.3: new low-speed USB device number 6 using uhci_hcd [ 4.215736] random: nonblocking pool is initialized [ 4.260039] usb 4-2.3: New USB device found, idVendor=0c45, idProduct=7401 [ 4.260046] usb 4-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.260051] usb 4-2.3: Product: TEMPer2V1.0 [ 4.260055] usb 4-2.3: Manufacturer: RDing [ 4.278924] input: RDing TEMPer2V1.0 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2.3/4-2.3:1.0/0003:0C45:7401.0006/input/input8 [ 4.332186] hid-generic 0003:0C45:7401.0006: input,hidraw5: USB HID v1.10 Keyboard [RDing TEMPer2V1.0] on usb-0000:00:1a.1-2.3/input0 [ 4.344714] hid-generic 0003:0C45:7401.0007: hiddev0,hidraw6: USB HID v1.10 Device [RDing TEMPer2V1.0] on usb-0000:00:1a.1-2.3/input1 [ 5.506534] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null) [ 6.533164] systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time. [ 7.519529] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 7.519660] systemd[1]: Detected architecture x86. [ 7.530538] systemd[1]: Set hostname to . [ 10.052733] systemd[1]: Created slice System Slice. [ 10.052835] systemd[1]: Listening on udev Control Socket. [ 10.052877] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.052890] systemd[1]: Reached target Encrypted Volumes. [ 10.053040] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.053089] systemd[1]: Listening on Journal Socket. [ 10.064210] systemd[1]: Started Braille Device Support. [ 10.064982] systemd[1]: Starting Uncomplicated firewall... [ 10.065622] systemd[1]: Mounting Huge Pages File System... [ 10.360228] systemd[1]: Starting Load Kernel Modules... [ 10.360921] systemd[1]: Mounting POSIX Message Queue File System... [ 10.361062] systemd[1]: Listening on Journal Audit Socket. [ 10.361168] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.361771] systemd[1]: Mounting Debug File System... [ 10.362442] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 10.362552] systemd[1]: Created slice User and Session Slice. [ 10.362574] systemd[1]: Reached target Slices. [ 10.363252] systemd[1]: Started Read required files in advance. [ 10.363442] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 10.363463] systemd[1]: Reached target User and Group Name Lookups. [ 10.363516] systemd[1]: Listening on fsck to fsckd communication Socket. [ 10.363559] systemd[1]: Listening on Syslog Socket. [ 10.365598] systemd[1]: Starting Journal Service... [ 10.365657] systemd[1]: Reached target Remote File Systems (Pre). [ 10.365679] systemd[1]: Reached target Remote File Systems. [ 10.365746] systemd[1]: Listening on udev Kernel Socket. [ 10.366400] systemd[1]: Starting Set console keymap... [ 10.427748] systemd[1]: Started Uncomplicated firewall. [ 10.595663] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 10.608239] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.628536] systemd[1]: Mounted POSIX Message Queue File System. [ 10.628584] systemd[1]: Mounted Debug File System. [ 10.628605] systemd[1]: Mounted Huge Pages File System. [ 11.326995] lp: driver loaded but no devices found [ 11.371308] ppdev: user-space parallel port driver [ 11.381397] systemd[1]: Started Journal Service. [ 14.345843] EXT4-fs (sdd5): re-mounted. Opts: errors=remount-ro [ 14.862668] systemd-journald[239]: Received request to flush runtime journal from PID 1 [ 15.227311] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.308484] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150930/utaddress-254) [ 15.308494] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.308533] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 16.483239] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 16.483244] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 16.483247] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 16.483249] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 16.483251] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e [ 16.483253] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 16.483256] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 16.483258] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 16.483260] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 16.561281] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 16.561368] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 16.561446] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 16.561524] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 16.561603] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 16.561683] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 16.561762] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 16.561842] input: HDA Intel HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 18.642158] usblp 4-2.2:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x344F [ 18.642196] usbcore: registered new interface driver usblp [ 19.419445] audit: type=1400 audit(1485468756.989:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=602 comm="apparmor_parser" [ 19.419457] audit: type=1400 audit(1485468756.989:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser" [ 19.419464] audit: type=1400 audit(1485468756.989:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=602 comm="apparmor_parser" [ 19.419470] audit: type=1400 audit(1485468756.989:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser" [ 19.744098] audit: type=1400 audit(1485468757.317:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=601 comm="apparmor_parser" [ 19.744109] audit: type=1400 audit(1485468757.317:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=601 comm="apparmor_parser" [ 19.835445] gpio_ich: GPIO from 451 to 511 on gpio_ich [ 19.973042] audit: type=1400 audit(1485468757.545:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=739 comm="apparmor_parser" [ 20.219425] audit: type=1400 audit(1485468757.793:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=743 comm="apparmor_parser" [ 20.219438] audit: type=1400 audit(1485468757.793:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=743 comm="apparmor_parser" [ 20.570186] audit: type=1400 audit(1485468758.141:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=618 comm="apparmor_parser" [ 21.872736] Adding 4157436k swap on /dev/sdd6. Priority:-1 extents:1 across:4157436k FS [ 22.636380] cgroup: new mount options do not match the existing superblock, will be ignored [ 34.283069] usblp3: removed [ 34.295180] usblp 4-2.2:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x344F [ 36.746603] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.940201] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.456884] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 38.456995] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 38.457031] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 354.552809] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 354.554317] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 527.269871] perf interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 1619.205376] perf interrupt took too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [ 7637.368034] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 7637.586045] usb 3-2: New USB device found, idVendor=046d, idProduct=0a0c [ 7637.586052] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7637.586056] usb 3-2: Product: Logitech USB Headset [ 7637.586061] usb 3-2: Manufacturer: Logitech [ 7637.596167] input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.3/0003:046D:0A0C.0008/input/input17 [ 7637.652259] hid-generic 0003:046D:0A0C.0008: input,hidraw7: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1a.0-2/input3 [ 7639.026421] usbcore: registered new interface driver snd-usb-audio [21676.261801] PM: Syncing filesystems ... done. [21676.952132] PM: Preparing system for sleep (mem) [21676.952346] Freezing user space processes ... (elapsed 0.079 seconds) done. [21677.032208] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [21677.033571] PM: Suspending system (mem) [21677.033601] Suspending console(s) (use no_console_suspend to debug) [21677.034646] sd 3:0:0:0: [sdd] Synchronizing SCSI cache [21677.035272] e1000e: EEE TX LPI TIMER: 00000000 [21677.220528] sd 3:0:0:0: [sdd] Stopping disk [21677.776040] PM: suspend of devices complete after 742.152 msecs [21677.792040] PM: late suspend of devices complete after 15.995 msecs [21677.792436] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [21677.792497] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [21677.792510] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [21677.792541] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [21677.792613] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [21677.792665] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [21677.792675] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [21677.792711] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [21677.792714] e1000e 0000:00:19.0: System wakeup enabled by ACPI [21677.808066] PM: noirq suspend of devices complete after 16.022 msecs [21677.808528] ACPI: Preparing to enter system sleep state S3 [21677.809908] PM: Saving platform NVS memory [21677.810181] Disabling non-boot CPUs ... [21677.810392] Broke affinity for irq 16 [21677.810395] Broke affinity for irq 18 [21677.810398] Broke affinity for irq 19 [21677.810401] Broke affinity for irq 21 [21677.810405] Broke affinity for irq 23 [21677.810407] Broke affinity for irq 26 [21677.810408] Broke affinity for irq 27 [21677.811423] smpboot: CPU 1 is now offline [21677.820275] ACPI: Low-level resume complete [21677.820275] PM: Restoring platform NVS memory [21677.820275] Enabling non-boot CPUs ... [21677.840303] x86: Booting SMP configuration: [21677.840304] smpboot: Booting Node 0 Processor 1 APIC 0x1 [21677.811416] Initializing CPU#1 [21677.842841] cache: parent cpu1 should not be sleeping [21677.843062] CPU1 is up [21677.844455] ACPI: Waking up from system sleep state S3 [21677.845669] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [21677.845677] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [21677.845704] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [21677.845763] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [21677.845812] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [21677.845840] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [21677.860205] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [21677.860263] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [21677.860426] PM: noirq resume of devices complete after 14.975 msecs [21677.860690] PM: early resume of devices complete after 0.247 msecs [21677.864029] e1000e 0000:00:19.0: System wakeup disabled by ACPI [21677.865996] usb usb3: root hub lost power or was reset [21677.866027] usb usb4: root hub lost power or was reset [21677.866057] usb usb5: root hub lost power or was reset [21677.866185] usb usb6: root hub lost power or was reset [21677.866216] usb usb7: root hub lost power or was reset [21677.866246] usb usb8: root hub lost power or was reset [21677.866349] rtc_cmos 00:01: System wakeup disabled by ACPI [21677.873949] sd 3:0:0:0: [sdd] Starting disk [21678.188036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21678.196023] usb 3-2: reset full-speed USB device number 2 using uhci_hcd [21678.215688] ata1.00: configured for UDMA/100 [21678.228038] ata2: SATA link down (SStatus 0 SControl 300) [21678.228056] ata5: SATA link down (SStatus 0 SControl 300) [21678.228073] ata6: SATA link down (SStatus 0 SControl 300) [21678.228088] ata3: SATA link down (SStatus 0 SControl 300) [21678.332037] usb 4-1: reset low-speed USB device number 2 using uhci_hcd [21678.344034] usb 5-2: reset low-speed USB device number 2 using uhci_hcd [21678.432055] firewire_core 0000:01:00.0: rediscovered device fw0 [21678.732044] usb 4-2: reset full-speed USB device number 3 using uhci_hcd [21679.488024] usb 4-2.1: reset full-speed USB device number 4 using uhci_hcd [21679.800022] usb 4-2.2: reset full-speed USB device number 5 using uhci_hcd [21679.818560] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -5 [21679.818569] PM: Device 4-2.1 failed to resume async: error -5 [21679.828894] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [21679.829000] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [21679.964678] usblp3: removed [21680.252037] usb 4-2.3: reset low-speed USB device number 6 using uhci_hcd [21680.618638] PM: resume of devices complete after 2757.944 msecs [21680.622655] usblp 4-2.2:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x344F [21680.622960] PM: Finishing wakeup. [21680.622961] Restarting tasks ... done. [21680.657564] usb 4-2.1: USB disconnect, device number 4 [21680.956022] usb 4-2.1: new full-speed USB device number 7 using uhci_hcd [21681.223556] usb 4-2.1: New USB device found, idVendor=04a8, idProduct=0404 [21681.223560] usb 4-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [21681.995712] hid-generic 0003:04A8:0404.0009: hiddev0,hidraw4: USB HID v1.00 Device [HID 04a8:0404] on usb-0000:00:1a.1-2.1/input0 [21682.652086] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [21682.673322] ata4.00: configured for UDMA/133 [21684.820291] e1000e: eth0 NIC Link is Down [21684.993750] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [21685.192208] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [21686.780896] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [21686.781006] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [21686.781045] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [25636.866254] PM: Syncing filesystems ... done. [25637.500499] PM: Preparing system for sleep (mem) [25637.500688] Freezing user space processes ... (elapsed 0.215 seconds) done. [25637.716499] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [25637.717959] PM: Suspending system (mem) [25637.717985] Suspending console(s) (use no_console_suspend to debug) [25637.718990] sd 3:0:0:0: [sdd] Synchronizing SCSI cache [25637.719122] sd 3:0:0:0: [sdd] Stopping disk [25637.719660] e1000e: EEE TX LPI TIMER: 00000000 [25638.272040] PM: suspend of devices complete after 553.758 msecs [25638.288039] PM: late suspend of devices complete after 15.994 msecs [25638.288442] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [25638.288503] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [25638.288516] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [25638.288547] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [25638.288619] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [25638.288672] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [25638.288682] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [25638.288717] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [25638.288722] e1000e 0000:00:19.0: System wakeup enabled by ACPI [25638.304061] PM: noirq suspend of devices complete after 16.018 msecs [25638.304523] ACPI: Preparing to enter system sleep state S3 [25638.305900] PM: Saving platform NVS memory [25638.306170] Disabling non-boot CPUs ... [25638.306359] Broke affinity for irq 1 [25638.306366] Broke affinity for irq 9 [25638.306369] Broke affinity for irq 12 [25638.306372] Broke affinity for irq 16 [25638.306375] Broke affinity for irq 18 [25638.306378] Broke affinity for irq 19 [25638.306381] Broke affinity for irq 21 [25638.306385] Broke affinity for irq 23 [25638.306387] Broke affinity for irq 26 [25638.306388] Broke affinity for irq 27 [25638.307416] smpboot: CPU 1 is now offline [25638.316280] ACPI: Low-level resume complete [25638.316280] PM: Restoring platform NVS memory [25638.316280] Enabling non-boot CPUs ... [25638.336305] x86: Booting SMP configuration: [25638.336306] smpboot: Booting Node 0 Processor 1 APIC 0x1 [25638.307408] Initializing CPU#1 [25638.338847] cache: parent cpu1 should not be sleeping [25638.339072] CPU1 is up [25638.340467] ACPI: Waking up from system sleep state S3 [25638.341563] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [25638.341597] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [25638.341631] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [25638.341732] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [25638.341763] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [25638.341795] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [25638.356228] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [25638.356266] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [25638.356462] PM: noirq resume of devices complete after 14.998 msecs [25638.356739] PM: early resume of devices complete after 0.260 msecs [25638.356820] e1000e 0000:00:19.0: System wakeup disabled by ACPI [25638.360044] usb usb3: root hub lost power or was reset [25638.360076] usb usb4: root hub lost power or was reset [25638.360106] usb usb5: root hub lost power or was reset [25638.360231] usb usb6: root hub lost power or was reset [25638.360262] usb usb7: root hub lost power or was reset [25638.360292] usb usb8: root hub lost power or was reset [25638.360364] rtc_cmos 00:01: System wakeup disabled by ACPI [25638.369982] sd 3:0:0:0: [sdd] Starting disk [25638.680046] usb 4-2: reset full-speed USB device number 3 using uhci_hcd [25638.684056] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [25638.688022] usb 3-2: reset full-speed USB device number 2 using uhci_hcd [25638.711734] ata1.00: configured for UDMA/100 [25638.720031] ata3: SATA link down (SStatus 0 SControl 300) [25638.720049] ata5: SATA link down (SStatus 0 SControl 300) [25638.720070] ata2: SATA link down (SStatus 0 SControl 300) [25638.728030] ata6: SATA link down (SStatus 0 SControl 300) [25638.836029] usb 5-2: reset low-speed USB device number 2 using uhci_hcd [25638.924057] firewire_core 0000:01:00.0: rediscovered device fw0 [25639.120038] usb 4-1: reset low-speed USB device number 2 using uhci_hcd [25639.720027] usb 4-2.2: reset full-speed USB device number 5 using uhci_hcd [25639.872742] usblp3: removed [25640.152036] usb 4-2.3: reset low-speed USB device number 6 using uhci_hcd [25640.248871] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [25640.248977] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [25640.588024] usb 4-2.1: reset full-speed USB device number 7 using uhci_hcd [25640.861584] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -5 [25640.861594] PM: Device 4-2.1 failed to resume async: error -5 [25640.861611] PM: resume of devices complete after 2504.868 msecs [25640.864692] usblp 4-2.2:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x344F [25640.865003] PM: Finishing wakeup. [25640.865005] Restarting tasks ... done. [25640.900590] usb 4-2.1: USB disconnect, device number 7 [25641.200053] usb 4-2.1: new full-speed USB device number 8 using uhci_hcd [25641.467611] usb 4-2.1: New USB device found, idVendor=04a8, idProduct=0404 [25641.467617] usb 4-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [25642.240710] hid-generic 0003:04A8:0404.000A: hiddev0,hidraw4: USB HID v1.00 Device [HID 04a8:0404] on usb-0000:00:1a.1-2.1/input0 [25643.144037] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [25643.160024] ata4.00: configured for UDMA/133 [25650.868302] e1000e: eth0 NIC Link is Down [25651.429061] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [25651.628252] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [25653.212886] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [25653.212997] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [25653.213032] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [30894.030596] PM: Syncing filesystems ... done. [30894.415807] PM: Preparing system for sleep (mem) [30894.416046] Freezing user space processes ... (elapsed 0.016 seconds) done. [30894.432264] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [30894.433749] PM: Suspending system (mem) [30894.433773] Suspending console(s) (use no_console_suspend to debug) [30894.434850] sd 3:0:0:0: [sdd] Synchronizing SCSI cache [30894.435517] e1000e: EEE TX LPI TIMER: 00000000 [30894.508096] sd 3:0:0:0: [sdd] Stopping disk [30895.052035] PM: suspend of devices complete after 617.969 msecs [30895.068045] PM: late suspend of devices complete after 16.005 msecs [30895.068452] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [30895.068513] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [30895.068527] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [30895.068558] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [30895.068630] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [30895.068682] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [30895.068692] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [30895.068728] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [30895.068731] e1000e 0000:00:19.0: System wakeup enabled by ACPI [30895.084055] PM: noirq suspend of devices complete after 16.006 msecs [30895.084516] ACPI: Preparing to enter system sleep state S3 [30895.085893] PM: Saving platform NVS memory [30895.086149] Disabling non-boot CPUs ... [30895.086334] Broke affinity for irq 1 [30895.086340] Broke affinity for irq 9 [30895.086344] Broke affinity for irq 12 [30895.086347] Broke affinity for irq 16 [30895.086350] Broke affinity for irq 18 [30895.086353] Broke affinity for irq 19 [30895.086356] Broke affinity for irq 21 [30895.086359] Broke affinity for irq 23 [30895.086362] Broke affinity for irq 26 [30895.086363] Broke affinity for irq 27 [30895.087386] smpboot: CPU 1 is now offline [30895.096269] ACPI: Low-level resume complete [30895.096269] PM: Restoring platform NVS memory [30895.096269] Enabling non-boot CPUs ... [30895.116304] x86: Booting SMP configuration: [30895.116305] smpboot: Booting Node 0 Processor 1 APIC 0x1 [30895.087383] Initializing CPU#1 [30895.118846] cache: parent cpu1 should not be sleeping [30895.119069] CPU1 is up [30895.120459] ACPI: Waking up from system sleep state S3 [30895.121556] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [30895.121590] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [30895.121623] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [30895.121687] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [30895.121735] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [30895.121775] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [30895.136211] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [30895.136214] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [30895.136445] PM: noirq resume of devices complete after 14.993 msecs [30895.136711] PM: early resume of devices complete after 0.249 msecs [30895.136814] e1000e 0000:00:19.0: System wakeup disabled by ACPI [30895.140045] usb usb3: root hub lost power or was reset [30895.140077] usb usb4: root hub lost power or was reset [30895.140107] usb usb5: root hub lost power or was reset [30895.140231] usb usb6: root hub lost power or was reset [30895.140261] usb usb7: root hub lost power or was reset [30895.140291] usb usb8: root hub lost power or was reset [30895.140395] rtc_cmos 00:01: System wakeup disabled by ACPI [30895.150018] sd 3:0:0:0: [sdd] Starting disk [30895.464043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [30895.468025] usb 3-2: reset full-speed USB device number 2 using uhci_hcd [30895.491712] ata1.00: configured for UDMA/100 [30895.500029] ata2: SATA link down (SStatus 0 SControl 300) [30895.500051] ata3: SATA link down (SStatus 0 SControl 300) [30895.500068] ata6: SATA link down (SStatus 0 SControl 300) [30895.508085] ata5: SATA link down (SStatus 0 SControl 300) [30895.608033] usb 4-1: reset low-speed USB device number 2 using uhci_hcd [30895.616035] usb 5-2: reset low-speed USB device number 2 using uhci_hcd [30895.748055] firewire_core 0000:01:00.0: rediscovered device fw0 [30896.008034] usb 4-2: reset full-speed USB device number 3 using uhci_hcd [30896.772024] usb 4-2.2: reset full-speed USB device number 5 using uhci_hcd [30896.828876] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [30896.828982] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [30896.924715] usblp3: removed [30897.204037] usb 4-2.3: reset low-speed USB device number 6 using uhci_hcd [30897.644017] usb 4-2.1: reset full-speed USB device number 8 using uhci_hcd [30897.927584] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -5 [30897.927593] PM: Device 4-2.1 failed to resume async: error -5 [30897.927610] PM: resume of devices complete after 2790.895 msecs [30897.930688] usblp 4-2.2:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x344F [30897.930997] PM: Finishing wakeup. [30897.930999] Restarting tasks ... done. [30897.984612] usb 4-2.1: USB disconnect, device number 8 [30898.292067] usb 4-2.1: new full-speed USB device number 9 using uhci_hcd [30898.555602] usb 4-2.1: New USB device found, idVendor=04a8, idProduct=0404 [30898.555607] usb 4-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [30899.324765] hid-generic 0003:04A8:0404.000B: hiddev0,hidraw4: USB HID v1.00 Device [HID 04a8:0404] on usb-0000:00:1a.1-2.1/input0 [30900.204054] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [30900.219934] ata4.00: configured for UDMA/133 [30901.822201] e1000e: eth0 NIC Link is Down [30902.248312] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [30902.444244] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [30904.048900] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [30904.049012] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [30904.049057] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [33496.824772] PM: Syncing filesystems ... done. [33496.960068] PM: Preparing system for sleep (mem) [33496.960251] Freezing user space processes ... (elapsed 0.024 seconds) done. [33496.984268] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [33496.985730] PM: Suspending system (mem) [33496.985762] Suspending console(s) (use no_console_suspend to debug) [33496.986755] sd 3:0:0:0: [sdd] Synchronizing SCSI cache [33496.987446] e1000e: EEE TX LPI TIMER: 00000000 [33497.135933] sd 3:0:0:0: [sdd] Stopping disk [33497.684045] PM: suspend of devices complete after 697.987 msecs [33497.700040] PM: late suspend of devices complete after 15.991 msecs [33497.700444] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [33497.700501] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [33497.700514] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [33497.700608] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [33497.700629] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [33497.700653] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [33497.700671] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [33497.700693] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [33497.700706] e1000e 0000:00:19.0: System wakeup enabled by ACPI [33497.716063] PM: noirq suspend of devices complete after 16.019 msecs [33497.716525] ACPI: Preparing to enter system sleep state S3 [33497.717909] PM: Saving platform NVS memory [33497.718164] Disabling non-boot CPUs ... [33497.718366] Broke affinity for irq 1 [33497.718373] Broke affinity for irq 9 [33497.718376] Broke affinity for irq 12 [33497.718379] Broke affinity for irq 16 [33497.718382] Broke affinity for irq 18 [33497.718385] Broke affinity for irq 19 [33497.718388] Broke affinity for irq 21 [33497.718391] Broke affinity for irq 23 [33497.718394] Broke affinity for irq 26 [33497.718395] Broke affinity for irq 27 [33497.719409] smpboot: CPU 1 is now offline [33497.728276] ACPI: Low-level resume complete [33497.728276] PM: Restoring platform NVS memory [33497.728276] Enabling non-boot CPUs ... [33497.748304] x86: Booting SMP configuration: [33497.748305] smpboot: Booting Node 0 Processor 1 APIC 0x1 [33497.719402] Initializing CPU#1 [33497.750840] cache: parent cpu1 should not be sleeping [33497.751065] CPU1 is up [33497.752456] ACPI: Waking up from system sleep state S3 [33497.753685] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [33497.753694] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [33497.753723] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [33497.753771] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [33497.753817] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [33497.753838] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [33497.768222] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [33497.768260] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [33497.768427] PM: noirq resume of devices complete after 14.976 msecs [33497.768693] PM: early resume of devices complete after 0.249 msecs [33497.768794] e1000e 0000:00:19.0: System wakeup disabled by ACPI [33497.770758] usb usb3: root hub lost power or was reset [33497.770790] usb usb4: root hub lost power or was reset [33497.770820] usb usb5: root hub lost power or was reset [33497.770937] usb usb6: root hub lost power or was reset [33497.770970] usb usb7: root hub lost power or was reset [33497.771000] usb usb8: root hub lost power or was reset [33497.771072] rtc_cmos 00:01: System wakeup disabled by ACPI [33497.777998] sd 3:0:0:0: [sdd] Starting disk [33498.096041] ata2: SATA link down (SStatus 0 SControl 300) [33498.100024] usb 3-2: reset full-speed USB device number 2 using uhci_hcd [33498.120033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [33498.120057] ata5: SATA link down (SStatus 0 SControl 300) [33498.120075] ata3: SATA link down (SStatus 0 SControl 300) [33498.132022] ata6: SATA link down (SStatus 0 SControl 300) [33498.147930] ata1.00: configured for UDMA/100 [33498.236037] usb 4-1: reset low-speed USB device number 2 using uhci_hcd [33498.248036] usb 5-2: reset low-speed USB device number 2 using uhci_hcd [33498.332057] firewire_core 0000:01:00.0: rediscovered device fw0 [33498.636036] usb 4-2: reset full-speed USB device number 3 using uhci_hcd [33499.392027] usb 4-2.2: reset full-speed USB device number 5 using uhci_hcd [33499.476872] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [33499.476978] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [33499.542431] usblp3: removed [33499.824036] usb 4-2.3: reset low-speed USB device number 6 using uhci_hcd [33500.264027] usb 4-2.1: reset full-speed USB device number 9 using uhci_hcd [33500.539292] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -5 [33500.539301] PM: Device 4-2.1 failed to resume async: error -5 [33500.539319] PM: resume of devices complete after 2770.622 msecs [33500.542401] usblp 4-2.2:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x344F [33500.542715] PM: Finishing wakeup. [33500.542716] Restarting tasks ... done. [33500.578306] usb 4-2.1: USB disconnect, device number 9 [33500.876033] usb 4-2.1: new full-speed USB device number 10 using uhci_hcd [33501.140290] usb 4-2.1: New USB device found, idVendor=04a8, idProduct=0404 [33501.140295] usb 4-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [33501.904506] hid-generic 0003:04A8:0404.000C: hiddev0,hidraw4: USB HID v1.00 Device [HID 04a8:0404] on usb-0000:00:1a.1-2.1/input0 [33502.600056] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [33502.615987] ata4.00: configured for UDMA/133 [33503.852359] e1000e: eth0 NIC Link is Down [33504.013534] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [33504.212234] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [33505.684880] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [33505.684990] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [33505.685025] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [39323.584232] PM: Syncing filesystems ... done. [39323.655799] PM: Preparing system for sleep (mem) [39323.656053] Freezing user space processes ... (elapsed 0.048 seconds) done. [39323.704316] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [39323.705704] PM: Suspending system (mem) [39323.705733] Suspending console(s) (use no_console_suspend to debug) [39323.706776] sd 3:0:0:0: [sdd] Synchronizing SCSI cache [39323.707426] e1000e: EEE TX LPI TIMER: 00000000 [39323.851435] sd 3:0:0:0: [sdd] Stopping disk [39324.400045] PM: suspend of devices complete after 694.021 msecs [39324.416041] PM: late suspend of devices complete after 15.992 msecs [39324.416442] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [39324.416503] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [39324.416516] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [39324.416548] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [39324.416620] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [39324.416673] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [39324.416682] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [39324.416718] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [39324.416722] e1000e 0000:00:19.0: System wakeup enabled by ACPI [39324.432061] PM: noirq suspend of devices complete after 16.016 msecs [39324.432523] ACPI: Preparing to enter system sleep state S3 [39324.433895] PM: Saving platform NVS memory [39324.434165] Disabling non-boot CPUs ... [39324.434352] Broke affinity for irq 1 [39324.434358] Broke affinity for irq 9 [39324.434361] Broke affinity for irq 12 [39324.434364] Broke affinity for irq 16 [39324.434368] Broke affinity for irq 18 [39324.434371] Broke affinity for irq 19 [39324.434374] Broke affinity for irq 21 [39324.434377] Broke affinity for irq 23 [39324.434379] Broke affinity for irq 26 [39324.434380] Broke affinity for irq 27 [39324.435404] smpboot: CPU 1 is now offline [39324.444274] ACPI: Low-level resume complete [39324.444274] PM: Restoring platform NVS memory [39324.444274] Enabling non-boot CPUs ... [39324.464307] x86: Booting SMP configuration: [39324.464308] smpboot: Booting Node 0 Processor 1 APIC 0x1 [39324.435401] Initializing CPU#1 [39324.466848] cache: parent cpu1 should not be sleeping [39324.467071] CPU1 is up [39324.468468] ACPI: Waking up from system sleep state S3 [39324.469564] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [39324.469599] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [39324.469632] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [39324.469695] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [39324.469744] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [39324.469784] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [39324.484191] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [39324.484277] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [39324.484429] PM: noirq resume of devices complete after 14.970 msecs [39324.484691] PM: early resume of devices complete after 0.245 msecs [39324.488026] e1000e 0000:00:19.0: System wakeup disabled by ACPI [39324.489992] usb usb3: root hub lost power or was reset [39324.490024] usb usb4: root hub lost power or was reset [39324.490054] usb usb5: root hub lost power or was reset [39324.490176] usb usb6: root hub lost power or was reset [39324.490208] usb usb7: root hub lost power or was reset [39324.490238] usb usb8: root hub lost power or was reset [39324.490310] rtc_cmos 00:01: System wakeup disabled by ACPI [39324.497980] sd 3:0:0:0: [sdd] Starting disk [39324.808040] usb 4-2: reset full-speed USB device number 3 using uhci_hcd [39324.816045] ata2: SATA link down (SStatus 0 SControl 300) [39324.820023] usb 3-2: reset full-speed USB device number 2 using uhci_hcd [39324.840034] ata6: SATA link down (SStatus 0 SControl 300) [39324.840055] ata3: SATA link down (SStatus 0 SControl 300) [39324.840071] ata5: SATA link down (SStatus 0 SControl 300) [39324.840088] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [39324.867944] ata1.00: configured for UDMA/100 [39324.968034] usb 5-2: reset low-speed USB device number 2 using uhci_hcd [39325.056056] firewire_core 0000:01:00.0: rediscovered device fw0 [39325.248033] usb 4-1: reset low-speed USB device number 2 using uhci_hcd [39325.852023] usb 4-2.2: reset full-speed USB device number 5 using uhci_hcd [39326.002692] usblp3: removed [39326.160875] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [39326.160981] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [39326.284036] usb 4-2.3: reset low-speed USB device number 6 using uhci_hcd [39326.724017] usb 4-2.1: reset full-speed USB device number 10 using uhci_hcd [39326.999558] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -5 [39326.999568] PM: Device 4-2.1 failed to resume async: error -5 [39326.999582] PM: resume of devices complete after 2514.888 msecs [39327.002656] usblp 4-2.2:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x344F [39327.002967] PM: Finishing wakeup. [39327.002968] Restarting tasks ... done. [39327.037578] usb 4-2.1: USB disconnect, device number 10 [39327.336033] usb 4-2.1: new full-speed USB device number 11 using uhci_hcd [39327.598561] usb 4-2.1: New USB device found, idVendor=04a8, idProduct=0404 [39327.598566] usb 4-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [39328.375718] hid-generic 0003:04A8:0404.000D: hiddev0,hidraw4: USB HID v1.00 Device [HID 04a8:0404] on usb-0000:00:1a.1-2.1/input0 [39329.332035] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [39329.342195] ata4.00: configured for UDMA/133 [39331.036380] e1000e: eth0 NIC Link is Down [39331.359683] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [39331.556231] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [39333.052886] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [39333.052996] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [39333.053031] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [40890.282090] PM: Syncing filesystems ... done. [40891.682181] PM: Preparing system for sleep (mem) [40891.682384] Freezing user space processes ... (elapsed 0.004 seconds) done. [40891.686456] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [40891.687852] PM: Suspending system (mem) [40891.687879] Suspending console(s) (use no_console_suspend to debug) [40891.689008] sd 3:0:0:0: [sdd] Synchronizing SCSI cache [40891.690143] e1000e: EEE TX LPI TIMER: 00000000 [40891.878203] sd 3:0:0:0: [sdd] Stopping disk [40892.436040] PM: suspend of devices complete after 747.790 msecs [40892.452039] PM: late suspend of devices complete after 15.995 msecs [40892.452538] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [40892.452612] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [40892.452632] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [40892.452663] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [40892.452749] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [40892.452815] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI [40892.452828] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI [40892.452867] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [40892.452872] e1000e 0000:00:19.0: System wakeup enabled by ACPI [40892.468060] PM: noirq suspend of devices complete after 16.017 msecs [40892.468522] ACPI: Preparing to enter system sleep state S3 [40892.470574] PM: Saving platform NVS memory [40892.470915] Disabling non-boot CPUs ... [40892.471136] Broke affinity for irq 1 [40892.471144] Broke affinity for irq 9 [40892.471147] Broke affinity for irq 12 [40892.471151] Broke affinity for irq 16 [40892.471154] Broke affinity for irq 18 [40892.471157] Broke affinity for irq 19 [40892.471161] Broke affinity for irq 21 [40892.471164] Broke affinity for irq 23 [40892.471167] Broke affinity for irq 26 [40892.471168] Broke affinity for irq 27 [40892.472207] smpboot: CPU 1 is now offline [40892.484334] ACPI: Low-level resume complete [40892.484334] PM: Restoring platform NVS memory [40892.484334] Enabling non-boot CPUs ... [40892.504310] x86: Booting SMP configuration: [40892.504311] smpboot: Booting Node 0 Processor 1 APIC 0x1 [40892.472003] Initializing CPU#1 [40892.506851] cache: parent cpu1 should not be sleeping [40892.507072] CPU1 is up [40892.508460] ACPI: Waking up from system sleep state S3 [40892.509552] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [40892.509586] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [40892.509619] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [40892.509683] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [40892.509731] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [40892.509771] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [40892.524190] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [40892.524256] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [40892.524395] PM: noirq resume of devices complete after 14.941 msecs [40892.524655] PM: early resume of devices complete after 0.243 msecs [40892.524755] e1000e 0000:00:19.0: System wakeup disabled by ACPI [40892.526721] usb usb3: root hub lost power or was reset [40892.526752] usb usb4: root hub lost power or was reset [40892.526782] usb usb5: root hub lost power or was reset [40892.526906] usb usb6: root hub lost power or was reset [40892.526939] usb usb7: root hub lost power or was reset [40892.526969] usb usb8: root hub lost power or was reset [40892.527040] rtc_cmos 00:01: System wakeup disabled by ACPI [40892.533989] sd 3:0:0:0: [sdd] Starting disk [40892.848035] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [40892.856023] usb 3-2: reset full-speed USB device number 2 using uhci_hcd [40892.875855] ata1.00: configured for UDMA/100 [40892.888032] ata3: SATA link down (SStatus 0 SControl 300) [40892.888053] ata2: SATA link down (SStatus 0 SControl 300) [40892.888070] ata5: SATA link down (SStatus 0 SControl 300) [40892.888086] ata6: SATA link down (SStatus 0 SControl 300) [40892.992032] usb 4-1: reset low-speed USB device number 2 using uhci_hcd [40893.004030] usb 5-2: reset low-speed USB device number 2 using uhci_hcd [40893.088057] firewire_core 0000:01:00.0: rediscovered device fw0 [40893.392038] usb 4-2: reset full-speed USB device number 3 using uhci_hcd [40894.160018] usb 4-2.2: reset full-speed USB device number 5 using uhci_hcd [40894.196872] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [40894.196978] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [40894.311409] usblp3: removed [40894.592037] usb 4-2.3: reset low-speed USB device number 6 using uhci_hcd [40895.032024] usb 4-2.1: reset full-speed USB device number 11 using uhci_hcd [40895.313283] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -5 [40895.313292] PM: Device 4-2.1 failed to resume async: error -5 [40895.313306] PM: resume of devices complete after 2788.648 msecs [40895.316385] usblp 4-2.2:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x344F [40895.316719] PM: Finishing wakeup. [40895.316721] Restarting tasks ... done. [40895.347295] usb 4-2.1: USB disconnect, device number 11 [40895.648041] usb 4-2.1: new full-speed USB device number 12 using uhci_hcd [40895.911060] usb 4-2.1: New USB device found, idVendor=04a8, idProduct=0404 [40895.911060] usb 4-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [40896.665905] hid-generic 0003:04A8:0404.000E: hiddev0,hidraw4: USB HID v1.00 Device [HID 04a8:0404] on usb-0000:00:1a.1-2.1/input0 [40897.536049] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [40897.547204] ata4.00: configured for UDMA/133 [40897.981953] e1000e: eth0 NIC Link is Down [40898.089944] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [40898.284267] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [40899.828883] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [40899.828994] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [40899.829028] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready