[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-46-generic (buildd@orlo) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #79-Ubuntu SMP Tue Mar 10 20:06:50 UTC 2015 (Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdb8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdb90000-0x00000000bdb9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bdb9e000-0x00000000bdddffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bdde0000-0x00000000bddfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: TOSHIBA Satellite U505/To be filled by O.E.M., BIOS 2.20 09/30/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DFFFF uncachable [ 0.000000] E0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 base 0BDE00000 mask FFFE00000 uncachable [ 0.000000] 4 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 1GB, type UC [ 0.000000] reg 3, base: 3038MB, range: 2MB, type UC [ 0.000000] reg 4, base: 3040MB, range: 32MB, type UC [ 0.000000] total RAM covered: 4062M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3038MB, range: 2MB, type UC [ 0.000000] reg 3, base: 3040MB, range: 32MB, type UC [ 0.000000] reg 4, base: 4GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbdb90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbdb8ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbd9fffff] page 2M [ 0.000000] [mem 0xbda00000-0xbdb8ffff] page 4k [ 0.000000] RAMDISK: [mem 0x34812000-0x36400fff] [ 0.000000] ACPI: RSDP 00000000000fa200 000024 (v02 TOSASU) [ 0.000000] ACPI: XSDT 00000000bdb90100 000064 (v01 TOSASU TOSASU00 20090930 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bdb90290 0000F4 (v04 TOSASU T0SASU00 20090930 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bdb905c0 00D6EC (v02 TOSASU A00 00000001 MSFT 03000001) [ 0.000000] ACPI: FACS 00000000bdb9e000 000040 [ 0.000000] ACPI: APIC 00000000bdb90390 00006C (v02 TOSASU APIC1610 20090930 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bdb90400 00003C (v01 TOSASU OEMMCFG 20090930 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000bdb90440 000176 (v01 TOSASU TOSASU00 20090930 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bdb9e040 0000B6 (v01 TOSASU OEMB1610 20090930 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bdb9dfc0 000038 (v01 TOSASU OEMHPET 20090930 MSFT 00000097) [ 0.000000] ACPI: GSCI 00000000bdb9e100 002024 (v01 TOSASU GMCHSCI 20090930 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bdba0cb0 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] [ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xbdb8ffff] [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] [ 0.000000] On node 0 totalpages: 1039149 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12079 pages used for memmap [ 0.000000] DMA32 zone: 773008 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdb90000-0xbdb9dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdb9e000-0xbdddffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdde0000-0xbddfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbde00000-0xbdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82368 r8192 d24128 u524288 [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1022889 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3979308K/4156596K available (7384K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 177288K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.700 MHz processor [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.40 BogoMIPS (lpj=8778800) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004050] Security Framework initialized [ 0.004076] AppArmor: AppArmor initialized [ 0.004077] Yama: becoming mindful. [ 0.004504] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.008370] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.009390] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.009402] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.009736] Initializing cgroup subsys memory [ 0.009748] Initializing cgroup subsys devices [ 0.009751] Initializing cgroup subsys freezer [ 0.009753] Initializing cgroup subsys blkio [ 0.009755] Initializing cgroup subsys perf_event [ 0.009758] Initializing cgroup subsys hugetlb [ 0.009788] CPU: Physical Processor ID: 0 [ 0.009789] CPU: Processor Core ID: 0 [ 0.009791] mce: CPU supports 6 MCE banks [ 0.009800] CPU0: Thermal monitoring enabled (TM2) [ 0.009808] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.009808] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.009808] tlb_flushall_shift: -1 [ 0.009928] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.011627] ACPI: Core revision 20131115 [ 0.011630] TOSHIBA Satellite detected - force copy of DSDT to local memory [ 0.011755] ACPI: Forced DSDT copy: length 0x0D6EC copied locally, original unmapped [ 0.015197] ACPI: All ACPI Tables successfully acquired [ 0.016011] ftrace: allocating 28563 entries in 112 pages [ 0.028550] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070087] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4400 @ 2.20GHz (fam: 06, model: 17, stepping: 0a) [ 0.072000] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms [ 0.072000] APIC delta adjusted to PM-Timer: 1247011 (1496394) [ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072000] ... version: 2 [ 0.072000] ... bit width: 40 [ 0.072000] ... generic registers: 2 [ 0.072000] ... value mask: 000000ffffffffff [ 0.072000] ... max period: 000000007fffffff [ 0.072000] ... fixed-purpose events: 3 [ 0.072000] ... event mask: 0000000700000003 [ 0.072000] x86: Booting SMP configuration: [ 0.072000] .... node #0, CPUs: #1 [ 0.083505] TSC synchronization [CPU#0 -> CPU#1]: [ 0.083508] Measured 332694695 cycles TSC warp between CPUs, turning off TSC clock. [ 0.083510] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.083549] x86: Booted up 1 node, 2 CPUs [ 0.083551] smpboot: Total of 2 processors activated (8778.80 BogoMIPS) [ 0.083676] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.084139] devtmpfs: initialized [ 0.086958] EVM: security.selinux [ 0.086960] EVM: security.SMACK64 [ 0.086962] EVM: security.ima [ 0.086963] EVM: security.capability [ 0.088031] PM: Registering ACPI NVS region [mem 0xbdb9e000-0xbdddffff] (2367488 bytes) [ 0.088233] pinctrl core: initialized pinctrl subsystem [ 0.088338] regulator-dummy: no parameters [ 0.088378] RTC time: 19:17:41, date: 07/09/15 [ 0.088434] NET: Registered protocol family 16 [ 0.088589] cpuidle: using governor ladder [ 0.088591] cpuidle: using governor menu [ 0.088636] ACPI: bus type PCI registered [ 0.088639] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.088716] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.088719] PCI: not using MMCONFIG [ 0.088720] PCI: Using configuration type 1 for base access [ 0.092076] bio: create slab at 0 [ 0.092097] ACPI: Added _OSI(Module Device) [ 0.092100] ACPI: Added _OSI(Processor Device) [ 0.092101] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.092103] ACPI: Added _OSI(Processor Aggregator Device) [ 0.172095] ACPI BIOS Warning (bug): Incorrect checksum in table [OEMB] - 0xBD, should be 0x89 (20131115/tbprint-214) [ 0.172123] ACPI BIOS Warning (bug): Incorrect checksum in table [GSCI] - 0x33, should be 0x95 (20131115/tbprint-214) [ 0.172320] ACPI: SSDT 00000000bdba0440 00023D (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.172605] ACPI: Dynamic OEM Table Load: [ 0.172608] ACPI: SSDT (null) 00023D (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.172706] ACPI: SSDT 00000000bdba0710 000594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.172975] ACPI: Dynamic OEM Table Load: [ 0.172978] ACPI: SSDT (null) 000594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.173160] ACPI: SSDT 00000000bdba0330 00010F (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.173436] ACPI: Dynamic OEM Table Load: [ 0.173439] ACPI: SSDT (null) 00010F (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.173505] ACPI: SSDT 00000000bdba0680 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.173776] ACPI: Dynamic OEM Table Load: [ 0.173779] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.184106] ACPI: Interpreter enabled [ 0.184112] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.184117] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.184131] ACPI: (supports S0 S3 S4 S5) [ 0.184133] ACPI: Using IOAPIC for interrupt routing [ 0.184151] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.200063] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.219852] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.219991] ACPI: No dock devices found. [ 0.252531] ACPI: Power Resource [PF0] (on) [ 0.252566] ACPI: Power Resource [PF1] (on) [ 0.252603] ACPI: Power Resource [PF2] (on) [ 0.252636] ACPI: Power Resource [PF3] (on) [ 0.252673] ACPI: Power Resource [PF4] (on) [ 0.252706] ACPI: Power Resource [PF5] (on) [ 0.253537] ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.253599] ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.253659] ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.253719] ACPI: PCI Interrupt Link [PILD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.253778] ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.253838] ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.253897] ACPI: PCI Interrupt Link [PILG] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.253956] ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.254008] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.254016] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.254021] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.254260] PCI host bridge to bus 0000:00 [ 0.254263] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.254266] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.254268] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.254270] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.254273] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff] [ 0.254283] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.254309] DMAR: Forcing write-buffer flush capability [ 0.254310] DMAR: Disabling IOMMU for graphics on this chipset [ 0.254389] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.254404] pci 0000:00:02.0: reg 0x10: [mem 0xfd800000-0xfdbfffff 64bit] [ 0.254413] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.254420] pci 0000:00:02.0: reg 0x20: [io 0xa400-0xa407] [ 0.254513] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.254525] pci 0000:00:02.1: reg 0x10: [mem 0xfdc00000-0xfdcfffff 64bit] [ 0.254667] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.254727] pci 0000:00:1a.0: reg 0x20: [io 0xa880-0xa89f] [ 0.254850] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.254910] pci 0000:00:1a.1: reg 0x20: [io 0xa800-0xa81f] [ 0.255033] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.255093] pci 0000:00:1a.2: reg 0x20: [io 0xa480-0xa49f] [ 0.255229] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.255257] pci 0000:00:1a.7: reg 0x10: [mem 0xfddff000-0xfddff3ff] [ 0.255373] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.255464] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.255487] pci 0000:00:1b.0: reg 0x10: [mem 0xfddf8000-0xfddfbfff 64bit] [ 0.255589] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.255675] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.255783] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.255871] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.255980] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.256035] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.256081] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.256190] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.256280] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 [ 0.256388] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.256479] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.256539] pci 0000:00:1d.0: reg 0x20: [io 0xb080-0xb09f] [ 0.256644] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.256683] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.256744] pci 0000:00:1d.1: reg 0x20: [io 0xb000-0xb01f] [ 0.256842] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.256885] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.256945] pci 0000:00:1d.2: reg 0x20: [io 0xac00-0xac1f] [ 0.257046] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.257104] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.257131] pci 0000:00:1d.7: reg 0x10: [mem 0xfddff400-0xfddff7ff] [ 0.257248] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.257303] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.257343] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.257450] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.257493] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.257718] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.257748] pci 0000:00:1f.2: reg 0x10: [io 0xbc00-0xbc07] [ 0.257760] pci 0000:00:1f.2: reg 0x14: [io 0xb880-0xb883] [ 0.257772] pci 0000:00:1f.2: reg 0x18: [io 0xb800-0xb807] [ 0.257784] pci 0000:00:1f.2: reg 0x1c: [io 0xb480-0xb483] [ 0.257796] pci 0000:00:1f.2: reg 0x20: [io 0xb400-0xb41f] [ 0.257808] pci 0000:00:1f.2: reg 0x24: [mem 0xfddff800-0xfddfffff] [ 0.257882] pci 0000:00:1f.2: PME# supported from D3hot [ 0.258061] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 [ 0.258079] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [ 0.258091] pci 0000:02:00.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.258093] pci 0000:02:00.0: MMC cards are now supported by standard SDHCI controller [ 0.258116] pci 0000:02:00.0: reg 0x10: [mem 0xfdeffc00-0xfdeffcff] [ 0.258289] pci 0000:02:00.0: supports D1 D2 [ 0.258291] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.258374] pci 0000:02:00.1: [1180:e230] type 00 class 0x088000 [ 0.258399] pci 0000:02:00.1: reg 0x10: [mem 0xfdeff800-0xfdeff8ff] [ 0.258572] pci 0000:02:00.1: supports D1 D2 [ 0.258574] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.268030] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.268039] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.268144] pci 0000:03:00.0: [10ec:8172] type 00 class 0x028000 [ 0.268167] pci 0000:03:00.0: reg 0x10: [io 0xc800-0xc8ff] [ 0.268184] pci 0000:03:00.0: reg 0x14: [mem 0xfdffc000-0xfdffffff] [ 0.268332] pci 0000:03:00.0: supports D1 D2 [ 0.268334] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 0.276017] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.276023] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.276028] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.276137] acpiphp: Slot [1] registered [ 0.276146] pci 0000:00:1c.3: PCI bridge to [bus 04-06] [ 0.276151] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.276156] pci 0000:00:1c.3: bridge window [mem 0xfe000000-0xfeafffff] [ 0.276164] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfcefffff 64bit pref] [ 0.276266] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000 [ 0.276290] pci 0000:07:00.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.276329] pci 0000:07:00.0: reg 0x18: [mem 0xfcfff000-0xfcffffff 64bit pref] [ 0.276354] pci 0000:07:00.0: reg 0x20: [mem 0xfcfe0000-0xfcfeffff 64bit pref] [ 0.276370] pci 0000:07:00.0: reg 0x30: [mem 0xfebe0000-0xfebfffff pref] [ 0.276462] pci 0000:07:00.0: supports D1 D2 [ 0.276464] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.288020] pci 0000:00:1c.5: PCI bridge to [bus 07] [ 0.288026] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.288031] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.288039] pci 0000:00:1c.5: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref] [ 0.288142] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 0.288156] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.288159] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.288161] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.288164] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xffffffff] (subtractive decode) [ 0.288834] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.288847] ACPI: \_SB_.PCI0: notify handler is installed [ 0.288888] Found 1 acpi root devices [ 0.292019] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.292019] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.292025] vgaarb: loaded [ 0.292027] vgaarb: bridge control possible 0000:00:02.0 [ 0.292248] SCSI subsystem initialized [ 0.292273] libata version 3.00 loaded. [ 0.292273] ACPI: bus type USB registered [ 0.292273] usbcore: registered new interface driver usbfs [ 0.292273] usbcore: registered new interface driver hub [ 0.292273] usbcore: registered new device driver usb [ 0.292273] PCI: Using ACPI for IRQ routing [ 0.303863] PCI: pci_cache_line_size set to 64 bytes [ 0.303948] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.303951] e820: reserve RAM buffer [mem 0xbdb90000-0xbfffffff] [ 0.304064] NetLabel: Initializing [ 0.304066] NetLabel: domain hash size = 128 [ 0.304068] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.304085] NetLabel: unlabeled traffic allowed by default [ 0.304100] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.304100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.304100] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.306085] Switched to clocksource hpet [ 0.311427] AppArmor: AppArmor Filesystem Enabled [ 0.311471] pnp: PnP ACPI init [ 0.311489] ACPI: bus type PNP registered [ 0.311639] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.311643] system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved [ 0.311646] system 00:00: [mem 0x00100000-0x002fffff] could not be reserved [ 0.311649] system 00:00: [mem 0x00300000-0xbddfffff] could not be reserved [ 0.311653] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.311853] pnp 00:01: [dma 4] [ 0.311882] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.311934] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.311973] pnp 00:03: Plug and Play ACPI device, IDs AUI0300 SYN1d00 SYN0002 PNP0f13 (active) [ 0.312032] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.312076] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.312113] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.312161] system 00:07: [io 0x0100-0x0103] has been reserved [ 0.312165] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.312202] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.312272] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.312275] system 00:09: [io 0x0378-0x037f] has been reserved [ 0.312278] system 00:09: [io 0x0400-0x041f] has been reserved [ 0.312281] system 00:09: [io 0x0500-0x053f] has been reserved [ 0.312283] system 00:09: [io 0x0800-0x087f] could not be reserved [ 0.312286] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.312289] system 00:09: [mem 0xfec00000-0xfec000ff] could not be reserved [ 0.312292] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.312295] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.312298] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.312300] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.312303] system 00:09: [mem 0xfed30000-0xfed30fff] has been reserved [ 0.312306] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.312309] system 00:09: [mem 0xff800000-0xffffffff] could not be reserved [ 0.312312] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.312459] pnp: PnP ACPI: found 10 devices [ 0.312461] ACPI: bus type PNP unregistered [ 0.319388] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.319393] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.319405] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.319440] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.319443] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.319446] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.319451] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbde00000-0xbdffffff 64bit pref] [ 0.319454] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.319457] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.319461] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.319465] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.319472] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.319477] pci 0000:00:1c.0: bridge window [mem 0xbde00000-0xbdffffff 64bit pref] [ 0.319485] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.319489] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.319495] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.319500] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.319508] pci 0000:00:1c.3: PCI bridge to [bus 04-06] [ 0.319512] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.319518] pci 0000:00:1c.3: bridge window [mem 0xfe000000-0xfeafffff] [ 0.319523] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfcefffff 64bit pref] [ 0.319532] pci 0000:00:1c.5: PCI bridge to [bus 07] [ 0.319535] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.319542] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.319547] pci 0000:00:1c.5: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref] [ 0.319555] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.319571] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.319573] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.319576] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.319578] pci_bus 0000:00: resource 7 [mem 0xbde00000-0xffffffff] [ 0.319581] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.319583] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.319585] pci_bus 0000:02: resource 2 [mem 0xbde00000-0xbdffffff 64bit pref] [ 0.319588] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.319590] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.319592] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.319595] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.319597] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfeafffff] [ 0.319599] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfcefffff 64bit pref] [ 0.319602] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.319604] pci_bus 0000:07: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.319607] pci_bus 0000:07: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref] [ 0.319609] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.319611] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.319614] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.319616] pci_bus 0000:01: resource 7 [mem 0xbde00000-0xffffffff] [ 0.319658] NET: Registered protocol family 2 [ 0.319886] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.320037] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.320222] TCP: Hash tables configured (established 32768 bind 32768) [ 0.320280] TCP: reno registered [ 0.320289] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.320324] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.320457] NET: Registered protocol family 1 [ 0.320480] pci 0000:00:02.0: Video device with shadowed ROM [ 0.324390] PCI: CLS 32 bytes, default 64 [ 0.324488] Trying to unpack rootfs image as initramfs... [ 0.906232] Freeing initrd memory: 28604K (ffff880034812000 - ffff880036401000) [ 0.906242] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.906245] software IO TLB [mem 0xb9b90000-0xbdb90000] (64MB) mapped at [ffff8800b9b90000-ffff8800bdb8ffff] [ 0.906506] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 0.906511] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 0.906591] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.906594] Scanning for low memory corruption every 60 seconds [ 0.906852] Initialise system trusted keyring [ 0.906912] audit: initializing netlink socket (disabled) [ 0.906927] type=2000 audit(1436469461.904:1): initialized [ 0.938242] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.939701] zbud: loaded [ 0.939871] VFS: Disk quotas dquot_6.5.2 [ 0.939923] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.940499] fuse init (API version 7.22) [ 0.940592] msgmni has been set to 7828 [ 0.940661] Key type big_key registered [ 0.941098] Key type asymmetric registered [ 0.941101] Asymmetric key parser 'x509' registered [ 0.941145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.941183] io scheduler noop registered [ 0.941185] io scheduler deadline registered (default) [ 0.941218] io scheduler cfq registered [ 0.941332] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.941638] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.941979] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.942308] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.942634] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.942727] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.942747] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.942791] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.942792] vesafb: scrolling: redraw [ 0.942794] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.943047] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k [ 0.967044] Console: switching to colour frame buffer device 128x48 [ 0.990922] fb0: VESA VGA frame buffer device [ 0.990957] intel_idle: does not run on family 6 model 23 [ 0.990964] ipmi message handler version 39.2 [ 0.991036] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.991090] ACPI: AC Adapter [AC] (on-line) [ 0.991202] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.996050] ACPI: Lid Switch [LID] [ 0.996094] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.996098] ACPI: Power Button [PWRB] [ 0.996140] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.996143] ACPI: Power Button [PWRF] [ 0.996210] ACPI: Fan [FAN0] (on) [ 0.996247] ACPI: Fan [FAN1] (on) [ 0.996280] ACPI: Fan [FAN2] (on) [ 0.996310] ACPI: Fan [FAN3] (on) [ 0.996344] ACPI: Fan [FAN4] (on) [ 0.996377] ACPI: Fan [FAN5] (on) [ 0.996725] Monitor-Mwait will be used to enter C-1 state [ 0.996739] Monitor-Mwait will be used to enter C-2 state [ 0.996751] Monitor-Mwait will be used to enter C-3 state [ 0.996772] ACPI: acpi_idle registered with cpuidle [ 1.244199] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.244202] ACPI: Thermal Zone [TZ0] (0 C) [ 1.244246] GHES: HEST is not enabled! [ 1.244365] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.246786] Linux agpgart interface v0.103 [ 1.246873] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 1.246930] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.247398] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.247569] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.249444] brd: module loaded [ 1.250441] loop: module loaded [ 1.250894] libphy: Fixed MDIO Bus: probed [ 1.250998] tun: Universal TUN/TAP device driver, 1.6 [ 1.251000] tun: (C) 1999-2004 Max Krasnyansky [ 1.251076] PPP generic driver version 2.4.2 [ 1.251143] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.251158] ehci-pci: EHCI PCI platform driver [ 1.251502] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.251510] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.251530] ehci-pci 0000:00:1a.7: debug port 1 [ 1.255455] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.255485] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfddff000 [ 1.264050] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.264153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.264158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.264168] usb usb1: Product: EHCI Host Controller [ 1.264171] usb usb1: Manufacturer: Linux 3.13.0-46-generic ehci_hcd [ 1.264173] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.264337] hub 1-0:1.0: USB hub found [ 1.264346] hub 1-0:1.0: 6 ports detected [ 1.264858] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.264865] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.264881] ehci-pci 0000:00:1d.7: debug port 1 [ 1.268788] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.268815] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfddff400 [ 1.280058] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.280120] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.280123] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.280125] usb usb2: Product: EHCI Host Controller [ 1.280127] usb usb2: Manufacturer: Linux 3.13.0-46-generic ehci_hcd [ 1.280129] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.280276] hub 2-0:1.0: USB hub found [ 1.280284] hub 2-0:1.0: 6 ports detected [ 1.280477] ehci-platform: EHCI generic platform driver [ 1.280489] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.280491] ohci-pci: OHCI PCI platform driver [ 1.280505] ohci-platform: OHCI generic platform driver [ 1.280512] uhci_hcd: USB Universal Host Controller Interface driver [ 1.280792] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.280798] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.280839] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a880 [ 1.280893] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.280896] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.280898] usb usb3: Product: UHCI Host Controller [ 1.280901] usb usb3: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 1.280903] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.281038] hub 3-0:1.0: USB hub found [ 1.281046] hub 3-0:1.0: 2 ports detected [ 1.281387] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.281394] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.281431] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a800 [ 1.281485] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.281488] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.281490] usb usb4: Product: UHCI Host Controller [ 1.281493] usb usb4: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 1.281495] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.281628] hub 4-0:1.0: USB hub found [ 1.281636] hub 4-0:1.0: 2 ports detected [ 1.281998] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.282004] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.282045] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a480 [ 1.282095] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.282098] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.282100] usb usb5: Product: UHCI Host Controller [ 1.282103] usb usb5: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 1.282105] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.282241] hub 5-0:1.0: USB hub found [ 1.282249] hub 5-0:1.0: 2 ports detected [ 1.282614] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.282621] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.282648] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 1.282698] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.282701] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.282703] usb usb6: Product: UHCI Host Controller [ 1.282705] usb usb6: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 1.282707] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.282834] hub 6-0:1.0: USB hub found [ 1.282842] hub 6-0:1.0: 2 ports detected [ 1.283184] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.283191] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.283218] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000 [ 1.283270] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.283273] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.283275] usb usb7: Product: UHCI Host Controller [ 1.283278] usb usb7: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 1.283280] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.283409] hub 7-0:1.0: USB hub found [ 1.283419] hub 7-0:1.0: 2 ports detected [ 1.283786] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.283793] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.283821] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ac00 [ 1.283875] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.283877] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.283880] usb usb8: Product: UHCI Host Controller [ 1.283882] usb usb8: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 1.283884] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.284030] hub 8-0:1.0: USB hub found [ 1.284038] hub 8-0:1.0: 2 ports detected [ 1.284213] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.297426] i8042: Detected active multiplexing controller, rev 1.1 [ 1.299980] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.299986] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.300021] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.300045] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.300068] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.300229] mousedev: PS/2 mouse device common for all mice [ 1.300481] rtc_cmos 00:05: RTC can wake from S4 [ 1.300667] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.300702] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.300787] device-mapper: uevent: version 1.0.3 [ 1.300882] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.300891] ledtrig-cpu: registered to indicate activity on CPUs [ 1.301010] TCP: cubic registered [ 1.301122] NET: Registered protocol family 10 [ 1.301326] NET: Registered protocol family 17 [ 1.301337] Key type dns_resolver registered [ 1.301646] Loading compiled-in X.509 certificates [ 1.302831] Loaded X.509 cert 'Magrathea: Glacier signing key: c7613364bc2aa19d70bf0c6e59bf8acaff65c879' [ 1.302848] registered taskstats version 1 [ 1.305704] Key type trusted registered [ 1.310332] Key type encrypted registered [ 1.310339] AppArmor: AppArmor sha1 policy hashing enabled [ 1.310342] IMA: No TPM chip found, activating TPM-bypass! [ 1.310797] regulator-dummy: disabling [ 1.310855] Magic number: 7:417:293 [ 1.310914] tty tty26: hash matches [ 1.311011] rtc_cmos 00:05: setting system clock to 2015-07-09 19:17:42 UTC (1436469462) [ 1.311585] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.311587] EDD information not available. [ 1.311622] PM: Hibernation image not present or could not be loaded. [ 1.322916] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.576080] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.700132] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.700143] ACPI: Battery Slot [BAT] (battery present) [ 1.701928] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 1.701933] Write protecting the kernel read-only data: 12288k [ 1.704765] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000) [ 1.707033] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000) [ 1.712565] usb 1-1: New USB device found, idVendor=05ca, idProduct=1804 [ 1.712570] usb 1-1: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 1.712573] usb 1-1: Manufacturer: Ricoh co. Ltd. [ 1.725524] systemd-udevd[107]: starting version 204 [ 1.759179] [drm] Initialized drm 1.1.0 20060810 [ 1.778017] sdhci: Secure Digital Host Controller Interface driver [ 1.778020] sdhci: Copyright(c) Pierre Ossman [ 1.779887] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 1) [ 1.780471] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.780482] sdhci-pci 0000:02:00.0: dummy supplies not allowed [ 1.780484] mmc0: no vqmmc regulator found [ 1.780486] sdhci-pci 0000:02:00.0: dummy supplies not allowed [ 1.780487] mmc0: no vmmc regulator found [ 1.780581] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA [ 1.781411] [drm] Memory usable by graphics device = 2048M [ 1.781417] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 1.781419] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 1.781439] Console: switching to colour dummy device 80x25 [ 1.786094] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.786109] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.805962] r8169 0000:07:00.0: irq 44 for MSI/MSI-X [ 1.806184] r8169 0000:07:00.0 eth0: RTL8102e at 0xffffc90010738000, e0:cb:4e:09:a7:59, XID 04c00000 IRQ 44 [ 1.824116] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 1.824134] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.824136] [drm] Driver supports precise vblank timestamp query. [ 1.824215] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.088045] usb 8-2: new low-speed USB device number 2 using uhci_hcd [ 2.117558] fbcon: inteldrmfb (fb0) is primary device [ 2.264067] usb 8-2: New USB device found, idVendor=046d, idProduct=c016 [ 2.264070] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.264071] usb 8-2: Product: Optical USB Mouse [ 2.264073] usb 8-2: Manufacturer: Logitech [ 2.270794] hidraw: raw HID events driver (C) Jiri Kosina [ 2.286304] usbcore: registered new interface driver usbhid [ 2.286305] usbhid: USB HID core driver [ 2.288632] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input10 [ 2.288797] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-2/input0 [ 2.740065] Console: switching to colour frame buffer device 160x50 [ 2.743007] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.743009] i915 0000:00:02.0: registered panic notifier [ 2.743191] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no) [ 3.449014] input: ALPS PS/2 Device as /devices/platform/i8042/serio2/input/input11 [ 3.466263] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input9 [ 3.524208] acpi device:03: registered as cooling_device8 [ 3.524288] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input14 [ 3.524849] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.524895] ahci 0000:00:1f.2: version 3.0 [ 3.525252] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 3.525320] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.525357] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 3.525361] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 3.548715] scsi0 : ahci [ 3.548836] scsi1 : ahci [ 3.548915] scsi2 : ahci [ 3.548999] scsi3 : ahci [ 3.549078] scsi4 : ahci [ 3.549177] scsi5 : ahci [ 3.549228] ata1: SATA max UDMA/133 abar m2048@0xfddff800 port 0xfddff900 irq 46 [ 3.549232] ata2: SATA max UDMA/133 abar m2048@0xfddff800 port 0xfddff980 irq 46 [ 3.549234] ata3: DUMMY [ 3.549236] ata4: DUMMY [ 3.549239] ata5: SATA max UDMA/133 abar m2048@0xfddff800 port 0xfddffb00 irq 46 [ 3.549242] ata6: SATA max UDMA/133 abar m2048@0xfddff800 port 0xfddffb80 irq 46 [ 3.872046] ata1: SATA link down (SStatus 0 SControl 300) [ 4.192044] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.243779] ata2.00: ATA-8: TOSHIBA MK5055GSX, FG001M, max UDMA/100 [ 4.243782] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.244673] ata2.00: configured for UDMA/100 [ 4.244845] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK5055GS FG00 PQ: 0 ANSI: 5 [ 4.245063] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.245064] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.245131] sd 1:0:0:0: [sda] Write Protect is off [ 4.245134] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.245163] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.301277] sda: sda1 sda2 < sda5 > [ 4.301735] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.564051] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.568144] ata5.00: ATAPI: HL-DT-ST DVDRAM GU10N, MT10, max UDMA/133 [ 4.573016] ata5.00: configured for UDMA/133 [ 4.578566] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N MT10 PQ: 0 ANSI: 5 [ 4.582203] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.582206] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.582342] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 4.582431] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 4.900050] ata6: SATA link down (SStatus 0 SControl 300) [ 25.909499] random: nonblocking pool is initialized [ 44.089250] bio: create slab at 1 [ 44.638501] bio: create slab at 1 [ 50.280526] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 50.280531] EXT4-fs (dm-1): write access will be enabled during recovery [ 51.513943] EXT4-fs (dm-1): orphan cleanup on readonly fs [ 51.514042] EXT4-fs (dm-1): 1 orphan inode deleted [ 51.514044] EXT4-fs (dm-1): recovery complete [ 51.638087] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 54.897201] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 55.081478] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 55.092791] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 55.762465] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 56.561459] systemd-udevd[439]: starting version 204 [ 57.220542] lp: driver loaded but no devices found [ 57.376310] ppdev: user-space parallel port driver [ 59.389307] wmi: Mapper loaded [ 59.391119] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 59.497142] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 [ 59.615752] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 59.615762] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 59.615764] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 59.615768] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 59.615770] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 59.628199] input: Toshiba input device as /devices/virtual/input/input15 [ 60.236759] cfg80211: Calling CRDA to update world regulatory domain [ 60.917428] type=1400 audit(1436469522.103:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=512 comm="apparmor_parser" [ 60.917438] type=1400 audit(1436469522.103:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser" [ 60.917444] type=1400 audit(1436469522.103:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser" [ 60.917455] type=1400 audit(1436469522.103:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=531 comm="apparmor_parser" [ 60.917464] type=1400 audit(1436469522.103:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=531 comm="apparmor_parser" [ 60.917469] type=1400 audit(1436469522.103:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=531 comm="apparmor_parser" [ 60.917959] type=1400 audit(1436469522.103:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser" [ 60.917966] type=1400 audit(1436469522.103:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser" [ 60.917976] type=1400 audit(1436469522.103:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=531 comm="apparmor_parser" [ 60.917981] type=1400 audit(1436469522.103:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=531 comm="apparmor_parser" [ 60.992729] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 61.459052] init: cups main process (589) killed by HUP signal [ 61.459069] init: cups main process ended, respawning [ 61.819472] Linux video capture interface: v2.00 [ 61.909743] SKU: Nid=0x1d sku_cfg=0x40138205 [ 61.909747] SKU: port_connectivity=0x1 [ 61.909749] SKU: enable_pcbeep=0x1 [ 61.909750] SKU: check_sum=0x00000003 [ 61.909752] SKU: customization=0x00000082 [ 61.909753] SKU: external_amp=0x0 [ 61.909754] SKU: platform_type=0x1 [ 61.909755] SKU: swap=0x0 [ 61.909757] SKU: override=0x1 [ 61.910118] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 61.910120] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 61.910122] hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 61.910123] mono: mono_out=0x0 [ 61.910125] dig-out=0x1e/0x0 [ 61.910126] inputs: [ 61.910128] Internal Mic=0x19 [ 61.910130] Mic=0x18 [ 61.910131] realtek: No valid SSID, checking pincfg 0x40138205 for NID 0x1d [ 61.910133] realtek: Enabling init ASM_ID=0x8205 CODEC_ID=10ec0269 [ 61.918480] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 61.918485] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 61.918487] hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 61.918488] mono: mono_out=0x0 [ 61.918489] inputs: [ 61.922418] input: HDA Intel SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 61.922587] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 61.922727] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 62.700431] cfg80211: World regulatory domain updated: [ 62.700436] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 62.700439] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 62.700441] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 62.700443] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 62.700445] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 62.700447] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 62.794795] uvcvideo: Found UVC 1.00 device (05ca:1804) [ 62.796527] input: UVC Camera (05ca:1804) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input19 [ 62.797024] usbcore: registered new interface driver uvcvideo [ 62.797028] USB Video Class driver (1.1.1) [ 62.825084] rtl8192se: FW Power Save off (module option) [ 62.825163] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE [ 62.825163] Loading firmware rtlwifi/rtl8192sefw.bin [ 63.176651] init: failsafe main process (603) killed by TERM signal [ 63.683689] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 64.206077] Bluetooth: Core ver 2.17 [ 64.206108] NET: Registered protocol family 31 [ 64.206110] Bluetooth: HCI device and connection manager initialized [ 64.206123] Bluetooth: HCI socket layer initialized [ 64.206126] Bluetooth: L2CAP socket layer initialized [ 64.206131] Bluetooth: SCO socket layer initialized [ 64.513619] Bluetooth: RFCOMM TTY layer initialized [ 64.513641] Bluetooth: RFCOMM socket layer initialized [ 64.513649] Bluetooth: RFCOMM ver 1.11 [ 66.004141] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 66.004146] Bluetooth: BNEP filters: protocol multicast [ 66.004159] Bluetooth: BNEP socket layer initialized [ 68.784869] audit_printk_skb: 165 callbacks suppressed [ 68.784873] type=1400 audit(1436469529.971:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1141 comm="apparmor_parser" [ 73.759238] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 73.759694] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 73.773456] r8169 0000:07:00.0 eth0: link down [ 73.773499] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 73.773915] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 74.325085] init: samba-ad-dc main process (1209) terminated with status 1 [ 76.012725] wlan0: authenticate with 80:37:73:cb:26:1b [ 76.032604] wlan0: send auth to 80:37:73:cb:26:1b (try 1/3) [ 76.034166] wlan0: authenticated [ 76.036110] wlan0: associate with 80:37:73:cb:26:1b (try 1/3) [ 76.039871] wlan0: RX AssocResp from 80:37:73:cb:26:1b (capab=0x1411 status=0 aid=2) [ 76.041600] wlan0: associated [ 76.041701] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 76.180784] wlan0: deauthenticating from 80:37:73:cb:26:1b by local choice (reason=2) [ 76.191169] wlan0: authenticate with 80:37:73:cb:26:1b [ 76.201209] wlan0: send auth to 80:37:73:cb:26:1b (try 1/3) [ 76.201286] cfg80211: Calling CRDA to update world regulatory domain [ 76.205961] cfg80211: World regulatory domain updated: [ 76.205968] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 76.205971] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 76.205973] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 76.205975] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 76.205977] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 76.205979] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 76.207936] wlan0: authenticated [ 76.212055] wlan0: associate with 80:37:73:cb:26:1b (try 1/3) [ 76.221695] wlan0: RX AssocResp from 80:37:73:cb:26:1b (capab=0x1411 status=0 aid=2) [ 76.223400] wlan0: associated [ 83.318179] init: plymouth-upstart-bridge main process ended, respawning [ 83.327098] init: plymouth-upstart-bridge main process (1434) terminated with status 1 [ 83.327120] init: plymouth-upstart-bridge main process ended, respawning [ 91.701568] type=1400 audit(1436469552.887:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1723 comm="apparmor_parser" [ 91.701579] type=1400 audit(1436469552.887:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1723 comm="apparmor_parser" [ 91.702091] type=1400 audit(1436469552.887:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1723 comm="apparmor_parser" [ 133.266176] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 133.297049] ISOFS: changing to secondary root [ 946.105638] systemd-hostnamed[2763]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 1260.528637] perf samples too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000