[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-18-generic (buildd@batsu) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #18-Ubuntu SMP Tue May 19 18:31:35 UTC 2015 (Ubuntu 3.19.0-18.18-generic 3.19.6) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=UUID=dd4dde07-c6aa-4520-a54f-2015fb48d338 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a6e3efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a6e3f000-0x00000000a6ebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire 5750Z/JE50_HR, BIOS V1.15 10/07/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0A7000000 mask FFF000000 uncachable [ 0.000000] 3 base 0A8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 6 base 100000000 mask FC0000000 write-back [ 0.000000] 7 base 140000000 mask FF0000000 write-back [ 0.000000] 8 base 14FE00000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE [ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14fc00000-0x14fdfffff] [ 0.000000] [mem 0x14fc00000-0x14fdfffff] page 2M [ 0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x140000000-0x14fbfffff] [ 0.000000] [mem 0x140000000-0x14fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x120000000-0x13fffffff] [ 0.000000] [mem 0x120000000-0x13fffffff] page 2M [ 0.000000] BRK [0x01fe9000, 0x01fe9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0xa6e3efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xa6dfffff] page 2M [ 0.000000] [mem 0xa6e00000-0xa6e3efff] page 4k [ 0.000000] init_memory_mapping: [mem 0xa6fff000-0xa6ffffff] [ 0.000000] [mem 0xa6fff000-0xa6ffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff] [ 0.000000] [mem 0x100000000-0x11fffffff] page 2M [ 0.000000] RAMDISK: [mem 0x3583e000-0x36c16fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x00000000A6FFE120 00008C (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000A6FFC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0x00000000A6FF0000 008F59 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 0x00000000A6F6D000 000040 [ 0.000000] ACPI: ASF! 0x00000000A6FFD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0x00000000A6FFB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0x00000000A6FFA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0x00000000A6FF9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 0x00000000A6FEF000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000A6FEE000 000BC2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 0x00000000A6FEC000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000A6FEB000 000C39 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000A6FEA000 0006C5 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: ASPT 0x00000000A6FE9000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000A6FE8000 00090C (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000A6FE7000 000996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x14fdf8000-0x14fdfcfff] [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014b600000-ffff88014f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x14fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xa6e3efff] [ 0.000000] node 0: [mem 0xa6fff000-0xa6ffffff] [ 0.000000] node 0: [mem 0x100000000-0x14fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x14fdfffff] [ 0.000000] On node 0 totalpages: 1010652 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10617 pages used for memmap [ 0.000000] DMA32 zone: 679488 pages, LIFO batch:31 [ 0.000000] Normal zone: 5112 pages used for memmap [ 0.000000] Normal zone: 327168 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xa7a00000-0xaf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa6e3f000-0xa6ebefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa6ebf000-0xa6fbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa6fbf000-0xa6ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa7000000-0xaf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88014fa00000 s87040 r8192 d31744 u262144 [ 0.000000] pcpu-alloc: s87040 r8192 d31744 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 994703 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=UUID=dd4dde07-c6aa-4520-a54f-2015fb48d338 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3874524K/4042608K available (7995K kernel code, 1232K rwdata, 3752K rodata, 1408K init, 1300K bss, 168084K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.970 MHz processor [ 0.000038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.94 BogoMIPS (lpj=8779880) [ 0.000041] pid_max: default: 32768 minimum: 301 [ 0.000047] ACPI: Core revision 20141107 [ 0.007922] ACPI: All ACPI Tables successfully acquired [ 0.051050] Security Framework initialized [ 0.051067] AppArmor: AppArmor initialized [ 0.051069] Yama: becoming mindful. [ 0.051393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.052306] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.052711] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.052718] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.052919] Initializing cgroup subsys memory [ 0.052924] Initializing cgroup subsys devices [ 0.052927] Initializing cgroup subsys freezer [ 0.052929] Initializing cgroup subsys net_cls [ 0.052931] Initializing cgroup subsys blkio [ 0.052933] Initializing cgroup subsys perf_event [ 0.052935] Initializing cgroup subsys net_prio [ 0.052937] Initializing cgroup subsys hugetlb [ 0.052962] CPU: Physical Processor ID: 0 [ 0.052963] CPU: Processor Core ID: 0 [ 0.052967] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.052970] mce: CPU supports 7 MCE banks [ 0.052982] CPU0: Thermal monitoring enabled (TM1) [ 0.052992] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.053109] Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000) [ 0.054610] ftrace: allocating 30079 entries in 118 pages [ 0.071207] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.110937] smpboot: CPU0: Intel(R) Pentium(R) CPU B960 @ 2.20GHz (fam: 06, model: 2a, stepping: 07) [ 0.110946] TSC deadline timer enabled [ 0.110971] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.110993] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.110995] ... version: 3 [ 0.110996] ... bit width: 48 [ 0.110997] ... generic registers: 8 [ 0.110998] ... value mask: 0000ffffffffffff [ 0.111000] ... max period: 0000ffffffffffff [ 0.111001] ... fixed-purpose events: 3 [ 0.111002] ... event mask: 00000007000000ff [ 0.111898] x86: Booting SMP configuration: [ 0.111901] .... node #0, CPUs: #1 [ 0.124982] x86: Booted up 1 node, 2 CPUs [ 0.124985] smpboot: Total of 2 processors activated (8779.88 BogoMIPS) [ 0.125054] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.126411] devtmpfs: initialized [ 0.128906] evm: security.selinux [ 0.128908] evm: security.SMACK64 [ 0.128909] evm: security.SMACK64EXEC [ 0.128910] evm: security.SMACK64TRANSMUTE [ 0.128911] evm: security.SMACK64MMAP [ 0.128912] evm: security.ima [ 0.128913] evm: security.capability [ 0.128985] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes) [ 0.129145] pinctrl core: initialized pinctrl subsystem [ 0.129275] RTC time: 16:44:22, date: 06/06/15 [ 0.129385] NET: Registered protocol family 16 [ 0.141017] cpuidle: using governor ladder [ 0.145031] cpuidle: using governor menu [ 0.145166] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.145168] ACPI: bus type PCI registered [ 0.145169] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.145255] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.145258] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.145615] PCI: Using configuration type 1 for base access [ 0.149540] ACPI: Added _OSI(Module Device) [ 0.149542] ACPI: Added _OSI(Processor Device) [ 0.149543] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.149544] ACPI: Added _OSI(Processor Aggregator Device) [ 0.152356] ACPI: Executed 1 blocks of module-level executable AML code [ 0.154937] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.155235] ACPI: Dynamic OEM Table Load: [ 0.155244] ACPI: SSDT 0xFFFF88014B017800 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.155807] ACPI: Dynamic OEM Table Load: [ 0.155813] ACPI: SSDT 0xFFFF88014B096000 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.156301] ACPI: Dynamic OEM Table Load: [ 0.156307] ACPI: SSDT 0xFFFF88014A66DC00 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.173171] ACPI: Interpreter enabled [ 0.173192] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.173208] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.173224] ACPI: (supports S0 S3 S4 S5) [ 0.173225] ACPI: Using IOAPIC for interrupt routing [ 0.173252] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.285109] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.285115] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.285149] \_SB_.PCI0:_OSC invalid UUID [ 0.285150] _OSC request data:1 1f 0 [ 0.285154] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.285818] PCI host bridge to bus 0000:00 [ 0.285822] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.285824] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.285825] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.285827] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.285829] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff] [ 0.285838] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.285934] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000 [ 0.285946] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.285953] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.285957] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.286090] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.286125] pci 0000:00:16.0: reg 0x10: [mem 0xc0604000-0xc060400f 64bit] [ 0.286244] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.286356] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.286704] pci 0000:00:1a.0: reg 0x10: [mem 0xc0609000-0xc06093ff] [ 0.288681] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.288781] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.288811] pci 0000:00:1b.0: reg 0x10: [mem 0xc0600000-0xc0603fff 64bit] [ 0.288948] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.289001] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.289049] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.289192] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.289247] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.289298] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.289441] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.289555] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.289897] pci 0000:00:1d.0: reg 0x10: [mem 0xc0608000-0xc06083ff] [ 0.291872] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.291938] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.291985] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.292213] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f [ 0.292241] pci 0000:00:1f.2: reg 0x10: [io 0x20b8-0x20bf] [ 0.292255] pci 0000:00:1f.2: reg 0x14: [io 0x20d4-0x20d7] [ 0.292269] pci 0000:00:1f.2: reg 0x18: [io 0x20b0-0x20b7] [ 0.292281] pci 0000:00:1f.2: reg 0x1c: [io 0x20d0-0x20d3] [ 0.292295] pci 0000:00:1f.2: reg 0x20: [io 0x2090-0x209f] [ 0.292309] pci 0000:00:1f.2: reg 0x24: [io 0x2080-0x208f] [ 0.292450] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.292476] pci 0000:00:1f.3: reg 0x10: [mem 0xc0606000-0xc06060ff 64bit] [ 0.292513] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f] [ 0.292625] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185 [ 0.292653] pci 0000:00:1f.5: reg 0x10: [io 0x20a8-0x20af] [ 0.292666] pci 0000:00:1f.5: reg 0x14: [io 0x20cc-0x20cf] [ 0.292680] pci 0000:00:1f.5: reg 0x18: [io 0x20a0-0x20a7] [ 0.292693] pci 0000:00:1f.5: reg 0x1c: [io 0x20c8-0x20cb] [ 0.292707] pci 0000:00:1f.5: reg 0x20: [io 0x2070-0x207f] [ 0.292720] pci 0000:00:1f.5: reg 0x24: [io 0x2060-0x206f] [ 0.293013] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000 [ 0.293055] pci 0000:02:00.0: reg 0x10: [mem 0xc0430000-0xc043ffff 64bit pref] [ 0.293084] pci 0000:02:00.0: reg 0x18: [mem 0xc0440000-0xc044ffff 64bit pref] [ 0.293138] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref] [ 0.293292] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.293344] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.293437] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501 [ 0.293478] pci 0000:02:00.1: reg 0x10: [mem 0xc0400000-0xc040ffff 64bit pref] [ 0.293690] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.293817] pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000 [ 0.293858] pci 0000:02:00.2: reg 0x10: [mem 0xc0410000-0xc041ffff 64bit pref] [ 0.294069] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold [ 0.294193] pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000 [ 0.294235] pci 0000:02:00.3: reg 0x10: [mem 0xc0420000-0xc042ffff 64bit pref] [ 0.294446] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold [ 0.301388] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.301414] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.301588] pci 0000:03:00.0: [14e4:4358] type 00 class 0x028000 [ 0.301628] pci 0000:03:00.0: reg 0x10: [mem 0xc0500000-0xc0503fff 64bit] [ 0.301854] pci 0000:03:00.0: supports D1 D2 [ 0.301856] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.301903] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.309370] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.309385] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.361728] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.361781] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.361832] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.361882] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.361932] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.361981] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.362031] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.362082] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.362176] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.362209] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.362323] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.362325] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.362328] vgaarb: loaded [ 0.362329] vgaarb: bridge control possible 0000:00:02.0 [ 0.362601] SCSI subsystem initialized [ 0.362653] libata version 3.00 loaded. [ 0.362677] ACPI: bus type USB registered [ 0.362698] usbcore: registered new interface driver usbfs [ 0.362708] usbcore: registered new interface driver hub [ 0.362723] usbcore: registered new device driver usb [ 0.362857] PCI: Using ACPI for IRQ routing [ 0.376395] PCI: pci_cache_line_size set to 64 bytes [ 0.376555] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.376557] e820: reserve RAM buffer [mem 0xa6e3f000-0xa7ffffff] [ 0.376559] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff] [ 0.376560] e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff] [ 0.376681] NetLabel: Initializing [ 0.376682] NetLabel: domain hash size = 128 [ 0.376683] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.376698] NetLabel: unlabeled traffic allowed by default [ 0.376770] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.376776] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.378819] Switched to clocksource hpet [ 0.384863] AppArmor: AppArmor Filesystem Enabled [ 0.384940] pnp: PnP ACPI init [ 0.385073] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.385075] system 00:00: [io 0xff2c-0xff2f] has been reserved [ 0.385077] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.385079] system 00:00: [io 0xffff] has been reserved [ 0.385082] system 00:00: [io 0xffff] has been reserved [ 0.385084] system 00:00: [io 0x0400-0x047f] could not be reserved [ 0.385086] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.385088] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.385092] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.385128] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.385173] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.385176] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.385213] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.385261] pnp 00:04: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active) [ 0.435112] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.435115] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.435117] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.435119] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.435121] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.435123] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.435125] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.435127] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.435129] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.435131] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.435134] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.435337] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved [ 0.435340] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved [ 0.435342] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.435359] pnp: PnP ACPI: found 7 devices [ 0.441958] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window [ 0.441993] pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafbfffff] [ 0.441997] pci 0000:02:00.0: BAR 6: assigned [mem 0xafb00000-0xafb007ff pref] [ 0.441999] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.442007] pci 0000:00:1c.0: bridge window [mem 0xafb00000-0xafbfffff] [ 0.442013] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.442022] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.442029] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.442042] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.442044] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.442046] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.442048] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff] [ 0.442050] pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafbfffff] [ 0.442052] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.442054] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff] [ 0.442082] NET: Registered protocol family 2 [ 0.442258] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.442343] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.442417] TCP: Hash tables configured (established 32768 bind 32768) [ 0.442439] TCP: reno registered [ 0.442447] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.442464] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.442520] NET: Registered protocol family 1 [ 0.442539] pci 0000:00:02.0: Video device with shadowed ROM [ 0.471178] PCI: CLS 64 bytes, default 64 [ 0.471239] Trying to unpack rootfs image as initramfs... [ 0.823871] Freeing initrd memory: 20324K (ffff88003583e000 - ffff880036c17000) [ 0.823905] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.823908] software IO TLB [mem 0xa2e3f000-0xa6e3f000] (64MB) mapped at [ffff8800a2e3f000-ffff8800a6e3efff] [ 0.823951] Simple Boot Flag at 0x44 set to 0x1 [ 0.824067] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.824122] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b [ 0.824129] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b [ 0.824188] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.824216] Scanning for low memory corruption every 60 seconds [ 0.824609] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.824636] Initialise system trusted keyring [ 0.824661] audit: initializing netlink subsys (disabled) [ 0.824675] audit: type=2000 audit(1433609062.780:1): initialized [ 0.825024] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.826574] zpool: loaded [ 0.826577] zbud: loaded [ 0.826747] VFS: Disk quotas dquot_6.5.2 [ 0.826789] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.827280] fuse init (API version 7.23) [ 0.827447] Key type big_key registered [ 0.827850] Key type asymmetric registered [ 0.827853] Asymmetric key parser 'x509' registered [ 0.827891] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.827923] io scheduler noop registered [ 0.827925] io scheduler deadline registered (default) [ 0.827957] io scheduler cfq registered [ 0.828368] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.828385] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.828420] vesafb: mode is 1680x1050x32, linelength=6720, pages=0 [ 0.828422] vesafb: scrolling: redraw [ 0.828423] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.828428] mtrr: type mismatch for b0000000,800000 old: write-back new: write-combining [ 0.828431] mtrr: type mismatch for b0000000,400000 old: write-back new: write-combining [ 0.828432] mtrr: type mismatch for b0000000,200000 old: write-back new: write-combining [ 0.828434] mtrr: type mismatch for b0000000,100000 old: write-back new: write-combining [ 0.828436] mtrr: type mismatch for b0000000,80000 old: write-back new: write-combining [ 0.828438] mtrr: type mismatch for b0000000,40000 old: write-back new: write-combining [ 0.828440] mtrr: type mismatch for b0000000,20000 old: write-back new: write-combining [ 0.828441] mtrr: type mismatch for b0000000,10000 old: write-back new: write-combining [ 0.828443] mtrr: type mismatch for b0000000,8000 old: write-back new: write-combining [ 0.828445] mtrr: type mismatch for b0000000,4000 old: write-back new: write-combining [ 0.828447] mtrr: type mismatch for b0000000,2000 old: write-back new: write-combining [ 0.828448] mtrr: type mismatch for b0000000,1000 old: write-back new: write-combining [ 0.828470] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90010780000, using 6912k, total 6912k [ 0.828568] Console: switching to colour frame buffer device 210x65 [ 0.828594] fb0: VESA VGA frame buffer device [ 0.828611] intel_idle: MWAIT substates: 0x21120 [ 0.828613] intel_idle: v0.4 model 0x2A [ 0.828614] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.255913] ACPI: AC Adapter [ACAD] (on-line) [ 1.256060] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0 [ 1.256065] ACPI: Power Button [PWRB] [ 1.256107] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1 [ 1.256130] ACPI: Lid Switch [LID0] [ 1.256168] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2 [ 1.256170] ACPI: Sleep Button [SLPB] [ 1.256213] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.256215] ACPI: Power Button [PWRF] [ 1.256598] GHES: HEST is not enabled! [ 1.256822] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.824449] tsc: Refined TSC clocksource calibration: 2195.013 MHz [ 1.824634] ACPI: Battery Slot [BAT0] (battery present) [ 1.824812] Linux agpgart interface v0.103 [ 1.826844] brd: module loaded [ 1.827533] loop: module loaded [ 1.827692] ata_piix 0000:00:1f.2: version 2.13 [ 1.827796] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.980838] scsi host0: ata_piix [ 1.980996] scsi host1: ata_piix [ 1.981047] ata1: SATA max UDMA/133 cmd 0x20b8 ctl 0x20d4 bmdma 0x2090 irq 19 [ 1.981052] ata2: SATA max UDMA/133 cmd 0x20b0 ctl 0x20d0 bmdma 0x2098 irq 19 [ 1.981162] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 2.136787] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 2.137237] scsi host2: ata_piix [ 2.137468] scsi host3: ata_piix [ 2.137520] ata3: SATA max UDMA/133 cmd 0x20a8 ctl 0x20cc bmdma 0x2070 irq 21 [ 2.137522] ata4: SATA max UDMA/133 cmd 0x20a0 ctl 0x20c8 bmdma 0x2078 irq 21 [ 2.137622] libphy: Fixed MDIO Bus: probed [ 2.137625] tun: Universal TUN/TAP device driver, 1.6 [ 2.137626] tun: (C) 1999-2004 Max Krasnyansky [ 2.137739] PPP generic driver version 2.4.2 [ 2.137831] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.137837] ehci-pci: EHCI PCI platform driver [ 2.137968] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.137975] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.137992] ehci-pci 0000:00:1a.0: debug port 2 [ 2.141906] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.141921] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0609000 [ 2.152785] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.152886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.152889] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.152891] usb usb1: Product: EHCI Host Controller [ 2.152892] usb usb1: Manufacturer: Linux 3.19.0-18-generic ehci_hcd [ 2.152894] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.153103] hub 1-0:1.0: USB hub found [ 2.153112] hub 1-0:1.0: 2 ports detected [ 2.153351] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.153358] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.153375] ehci-pci 0000:00:1d.0: debug port 2 [ 2.157271] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.157288] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0608000 [ 2.168805] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.168906] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.168909] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.168911] usb usb2: Product: EHCI Host Controller [ 2.168913] usb usb2: Manufacturer: Linux 3.19.0-18-generic ehci_hcd [ 2.168914] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.169125] hub 2-0:1.0: USB hub found [ 2.169135] hub 2-0:1.0: 2 ports detected [ 2.169261] ehci-platform: EHCI generic platform driver [ 2.169275] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.169281] ohci-pci: OHCI PCI platform driver [ 2.169293] ohci-platform: OHCI generic platform driver [ 2.169302] uhci_hcd: USB Universal Host Controller Interface driver [ 2.169358] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 2.241524] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.241529] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.241725] mousedev: PS/2 mouse device common for all mice [ 2.245496] rtc_cmos 00:01: RTC can wake from S4 [ 2.245754] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.245793] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 2.245814] i2c /dev entries driver [ 2.245886] device-mapper: uevent: version 1.0.3 [ 2.246051] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 2.246071] Intel P-state driver initializing. [ 2.246329] Consider also installing thermald for improved thermal control. [ 2.246348] ledtrig-cpu: registered to indicate activity on CPUs [ 2.247451] PCCT header not found. [ 2.247464] ACPI PCC probe failed. [ 2.247569] TCP: cubic registered [ 2.247680] NET: Registered protocol family 10 [ 2.247991] NET: Registered protocol family 17 [ 2.248003] Key type dns_resolver registered [ 2.248618] Loading compiled-in X.509 certificates [ 2.249688] Loaded X.509 cert 'Magrathea: Glacier signing key: f1a2a318f705ddcda4685a3212116c13d2fd2366' [ 2.249706] registered taskstats version 1 [ 2.251838] Key type trusted registered [ 2.255413] Key type encrypted registered [ 2.255423] AppArmor: AppArmor sha1 policy hashing enabled [ 2.255428] ima: No TPM chip found, activating TPM-bypass! [ 2.255450] evm: HMAC attrs: 0x1 [ 2.255948] Magic number: 3:830:741 [ 2.255998] workqueue writeback: hash matches [ 2.256052] rtc_cmos 00:01: setting system clock to 2015-06-06 16:44:25 UTC (1433609065) [ 2.256114] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.256115] EDD information not available. [ 2.256191] PM: Hibernation image not present or could not be loaded. [ 2.323440] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.465167] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.481172] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.597871] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.597875] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.598429] hub 1-1:1.0: USB hub found [ 2.598742] hub 1-1:1.0: 6 ports detected [ 2.613855] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.613859] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.614256] hub 2-1:1.0: USB hub found [ 2.614448] hub 2-1:1.0: 6 ports detected [ 2.825704] Switched to clocksource tsc [ 2.869739] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 2.885734] usb 2-1.2: new high-speed USB device number 3 using ehci-pci [ 2.980258] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=3440 [ 2.980262] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.980265] usb 2-1.2: Product: SCX-4623FW Series [ 2.980266] usb 2-1.2: Manufacturer: Samsung Electronics Co., Ltd. [ 2.980268] usb 2-1.2: SerialNumber: Z4YSBFFZ800983J [ 3.011980] usb 1-1.3: New USB device found, idVendor=058f, idProduct=b002 [ 3.011984] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.011986] usb 1-1.3: Product: 1.3M HD WebCam [ 3.011988] usb 1-1.3: Manufacturer: AABAE11LA [ 3.049924] usb 2-1.3: new low-speed USB device number 4 using ehci-pci [ 3.148563] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c51b [ 3.148567] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.148569] usb 2-1.3: Product: USB Receiver [ 3.148571] usb 2-1.3: Manufacturer: Logitech [ 3.334018] ata2.01: failed to resume link (SControl 0) [ 3.342033] ata1.01: failed to resume link (SControl 0) [ 3.490276] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.490297] ata2.01: SATA link down (SStatus 0 SControl 0) [ 3.490315] ata2.01: link offline, clearing class 3 to NONE [ 3.498285] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.498306] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3.506779] ata1.00: ATA-8: WDC WD5000BPVT-22HXZT3, 01.01A01, max UDMA/133 [ 3.506789] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.514531] ata2.00: ATAPI: PIONEER DVD-RW DVRTD11RS, 1.01, max UDMA/100 [ 3.522823] ata1.00: configured for UDMA/133 [ 3.523074] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 1A01 PQ: 0 ANSI: 5 [ 3.523393] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.523429] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.523432] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.523572] sd 0:0:0:0: [sda] Write Protect is off [ 3.523576] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.523680] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.546547] ata2.00: configured for UDMA/100 [ 3.560611] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVRTD11RS 1.01 PQ: 0 ANSI: 5 [ 3.574320] sda: sda1 sda3 < sda5 sda6 > [ 3.575110] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.601132] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.601142] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.601366] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.601518] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.602018] Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000) [ 3.602021] Write protecting the kernel read-only data: 12288k [ 3.602290] Freeing unused kernel memory: 184K (ffff8800017d2000 - ffff880001800000) [ 3.602381] Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000) [ 3.613823] random: systemd-udevd urandom read with 18 bits of entropy available [ 4.068293] pps_core: LinuxPPS API ver. 1 registered [ 4.068296] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.068297] sdhci: Secure Digital Host Controller Interface driver [ 4.068298] sdhci: Copyright(c) Pierre Ossman [ 4.069748] PTP clock support registered [ 4.069885] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 4.070078] sdhci-pci 0000:02:00.1: No vmmc regulator found [ 4.070080] sdhci-pci 0000:02:00.1: No vqmmc regulator found [ 4.075556] hidraw: raw HID events driver (C) Jiri Kosina [ 4.078864] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA 64-bit [ 4.081491] tg3.c:v3.137 (May 11, 2014) [ 4.082838] usbcore: registered new interface driver usbhid [ 4.082841] usbhid: USB HID core driver [ 4.104213] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address dc:0e:a1:21:e4:8d [ 4.104218] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 4.104221] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 4.104223] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 4.116269] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C51B.0001/input/input7 [ 4.116469] hid-generic 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0 [ 4.117063] hid-generic 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1 [ 4.585410] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 5.548824] random: nonblocking pool is initialized [ 5.753265] systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time. [ 5.814100] systemd[1]: Inserted module 'autofs4' [ 6.010252] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 6.010382] systemd[1]: Detected architecture x86-64. [ 6.041402] systemd[1]: Set hostname to . [ 6.279602] psmouse serio1: synaptics: queried max coordinates: x [..5774], y [..5022] [ 6.560292] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1694, fw id: 705179 [ 6.737114] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 7.655833] systemd[1]: Created slice Root Slice. [ 7.655848] systemd[1]: Starting Root Slice. [ 7.655888] systemd[1]: Listening on udev Control Socket. [ 7.655897] systemd[1]: Starting udev Control Socket. [ 7.655998] systemd[1]: Created slice System Slice. [ 7.656012] systemd[1]: Starting System Slice. [ 7.656023] systemd[1]: Reached target Encrypted Volumes. [ 7.656030] systemd[1]: Starting Encrypted Volumes. [ 7.656066] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.656075] systemd[1]: Starting Journal Socket (/dev/log). [ 7.656261] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.656272] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 7.656306] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.656315] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 7.656344] systemd[1]: Listening on Delayed Shutdown Socket. [ 7.656353] systemd[1]: Starting Delayed Shutdown Socket. [ 7.656384] systemd[1]: Listening on Journal Audit Socket. [ 7.656392] systemd[1]: Starting Journal Audit Socket. [ 7.656425] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.656433] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 7.656455] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.656463] systemd[1]: Starting fsck to fsckd communication Socket. [ 7.656485] systemd[1]: Listening on udev Kernel Socket. [ 7.656493] systemd[1]: Starting udev Kernel Socket. [ 7.656591] systemd[1]: Created slice system-getty.slice. [ 7.656600] systemd[1]: Starting system-getty.slice. [ 7.656671] systemd[1]: Created slice User and Session Slice. [ 7.656679] systemd[1]: Starting User and Session Slice. [ 7.656689] systemd[1]: Reached target Slices. [ 7.656696] systemd[1]: Starting Slices. [ 7.657223] systemd[1]: Starting Increase datagram queue length... [ 7.657303] systemd[1]: Listening on Journal Socket. [ 7.657331] systemd[1]: Starting Journal Socket. [ 7.657931] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 7.658542] systemd[1]: Mounting Huge Pages File System... [ 7.659104] systemd[1]: Starting udev Coldplug all Devices... [ 7.659667] systemd[1]: Starting Uncomplicated firewall... [ 8.003866] systemd[1]: Starting Load Kernel Modules... [ 8.181522] systemd[1]: Started Set Up Additional Binary Formats. [ 8.182136] systemd[1]: Starting Nameserver information manager... [ 8.182695] systemd[1]: Started Read required files in advance. [ 8.182877] systemd[1]: Starting Read required files in advance... [ 8.183476] systemd[1]: Starting Setup Virtual Console... [ 8.184048] systemd[1]: Started Braille Device Support. [ 8.184116] systemd[1]: Starting Braille Device Support... [ 8.184691] systemd[1]: Mounting Debug File System... [ 8.185233] systemd[1]: Mounting POSIX Message Queue File System... [ 8.185299] systemd[1]: Reached target Remote File Systems (Pre). [ 8.185315] systemd[1]: Starting Remote File Systems (Pre). [ 8.186287] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 8.373390] systemd[1]: Started Uncomplicated firewall. [ 8.373666] systemd[1]: Started Setup Virtual Console. [ 8.377914] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.505802] systemd[1]: Mounted Huge Pages File System. [ 8.505841] systemd[1]: Mounted Debug File System. [ 8.505861] systemd[1]: Mounted POSIX Message Queue File System. [ 8.506117] systemd[1]: Started Increase datagram queue length. [ 8.515938] systemd[1]: Listening on Syslog Socket. [ 8.515955] systemd[1]: Starting Syslog Socket. [ 8.516554] systemd[1]: Starting Journal Service... [ 8.598005] systemd[1]: Started Nameserver information manager. [ 8.701405] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode [ 8.908146] systemd[1]: Started udev Coldplug all Devices. [ 8.908785] lp: driver loaded but no devices found [ 8.908827] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 8.922056] ppdev: user-space parallel port driver [ 9.127831] systemd[1]: Started Load Kernel Modules. [ 9.128525] systemd[1]: Starting Apply Kernel Variables... [ 9.128600] systemd[1]: Mounted Configuration File System. [ 9.129142] systemd[1]: Mounting FUSE Control File System... [ 9.131127] systemd[1]: Mounted FUSE Control File System. [ 9.622676] systemd[1]: Started Journal Service. [ 13.130096] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258) [ 13.130103] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.130107] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 13.130111] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.130112] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 13.130115] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.130116] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 13.130119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.130120] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 13.136738] wmi: Mapper loaded [ 13.373329] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.579143] [drm] Initialized drm 1.1.0 20060810 [ 13.906527] bcma: bus0: Found chip with id 43227, rev 0x00 and package 0x08 [ 13.906564] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 13.906592] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0) [ 13.906645] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0) [ 13.906670] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0) [ 13.919246] bcma: bus0: Bus registered [ 14.265282] WARNING! power/level is deprecated; use power/control instead [ 14.524713] [drm] Memory usable by graphics device = 2048M [ 14.524718] checking generic (b0000000 6c0000) vs hw (b0000000 10000000) [ 14.524720] fb: switching to inteldrmfb from VESA VGA [ 14.524748] Console: switching to colour dummy device 80x25 [ 14.524818] [drm] Replacing VGA console driver [ 14.549727] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.549734] [drm] Driver supports precise vblank timestamp query. [ 14.549835] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 14.574451] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.603952] fbcon: inteldrmfb (fb0) is primary device [ 14.603989] Console: switching to colour frame buffer device 170x48 [ 14.604011] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 14.604013] i915 0000:00:02.0: registered panic notifier [ 14.986243] acpi device:2e: registered as cooling_device2 [ 14.986355] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 14.986428] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 [ 15.008620] acer_wmi: Acer Laptop ACPI-WMI Extras [ 15.008634] acer_wmi: Function bitmap for Communication Button: 0x1 [ 15.008637] acer_wmi: Brightness must be controlled by generic video driver [ 15.008639] acer_wmi: Disabling ACPI video driver [ 15.008888] input: Acer WMI hotkeys as /devices/virtual/input/input9 [ 15.009134] input: Acer BMA150 accelerometer as /devices/virtual/input/input10 [ 15.358942] media: Linux media interface: v0.10 [ 15.416142] sound hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0 [ 15.416725] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.416727] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.416729] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 15.416731] sound hdaudioC0D0: mono: mono_out=0x0 [ 15.416732] sound hdaudioC0D0: inputs: [ 15.416735] sound hdaudioC0D0: Internal Mic=0x1b [ 15.416737] sound hdaudioC0D0: Mic=0x18 [ 15.431160] Linux video capture interface: v2.00 [ 15.536002] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 15.536069] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 15.536268] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 15.664838] intel_rapl: Found RAPL domain package [ 15.664842] intel_rapl: Found RAPL domain core [ 15.664845] intel_rapl: Found RAPL domain uncore [ 15.820607] cfg80211: Calling CRDA to update world regulatory domain [ 16.206695] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002) [ 16.209881] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14 [ 16.209954] usbcore: registered new interface driver uvcvideo [ 16.209955] USB Video Class driver (1.1.1) [ 17.101578] b43-phy0: Broadcom 43227 WLAN found (core revision 30) [ 17.102030] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16 [ 17.102042] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1 [ 17.102550] Broadcom 43xx driver loaded [ Features: PNL ] [ 17.531070] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2 [ 17.531093] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2 [ 17.594922] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2 [ 17.594943] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2 [ 17.594948] b43-phy0 ERROR: Firmware file "b43/ucode30_mimo.fw" not found [ 17.594950] b43-phy0 ERROR: Firmware file "b43-open/ucode30_mimo.fw" not found [ 17.594951] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 18.292104] cfg80211: World regulatory domain updated: [ 18.292109] cfg80211: DFS Master region: unset [ 18.292111] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 18.292114] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 18.292116] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 18.292118] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 18.292120] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 18.292122] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 19.697005] Adding 4881404k swap on /dev/sda5. Priority:-1 extents:1 across:4881404k FS [ 20.801423] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3440 [ 20.801446] usbcore: registered new interface driver usblp [ 28.831717] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 28.877731] systemd-journald[213]: Received request to flush runtime journal from PID 1 [ 29.171903] audit: type=1400 audit(1433634292.381:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=442 comm="apparmor_parser" [ 29.171912] audit: type=1400 audit(1433634292.381:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=442 comm="apparmor_parser" [ 29.174079] audit: type=1400 audit(1433634292.385:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=442 comm="apparmor_parser" [ 29.174087] audit: type=1400 audit(1433634292.385:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=442 comm="apparmor_parser" [ 29.174093] audit: type=1400 audit(1433634292.385:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=442 comm="apparmor_parser" [ 29.174098] audit: type=1400 audit(1433634292.385:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=442 comm="apparmor_parser" [ 29.184599] audit: type=1400 audit(1433634292.393:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=442 comm="apparmor_parser" [ 29.184609] audit: type=1400 audit(1433634292.393:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=442 comm="apparmor_parser" [ 29.184615] audit: type=1400 audit(1433634292.393:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=442 comm="apparmor_parser" [ 29.184620] audit: type=1400 audit(1433634292.393:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=442 comm="apparmor_parser" [ 29.563233] cgroup: new mount options do not match the existing superblock, will be ignored [ 33.649647] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex [ 33.649658] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX [ 33.649661] tg3 0000:02:00.0 eth0: EEE is disabled [ 499.363699] usblp1: removed [ 518.168312] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3440 [ 518.169010] usblp1: removed [ 518.242245] usb 2-1.2: reset high-speed USB device number 3 using ehci-pci [ 518.336143] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3440 [ 2259.873469] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [ 2259.873471] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [ 2259.874427] CPU0: Package temperature/speed normal [ 2259.874428] CPU1: Package temperature/speed normal [ 2487.229401] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 2487.229477] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 2487.229521] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 2487.229537] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 2487.229810] pci_bus 0000:02: Allocating resources [ 2487.229878] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 2487.229889] pci_bus 0000:03: Allocating resources [ 2487.229907] pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 2487.229910] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 2487.229914] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 2487.229918] pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 2487.229920] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 2487.229922] pcieport 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 2487.229930] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xafc00000-0xafdfffff 64bit pref] [ 2487.229935] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 2487.229938] pcieport 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff] [ 2487.230040] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 2488.409945] tg3 0000:02:00.0 eth0: Link is down [ 2490.246421] usb 2-1.2: USB disconnect, device number 3 [ 2490.246722] usblp1: removed [ 2503.858616] PM: Syncing filesystems ... done. [ 2506.148756] PM: Preparing system for mem sleep [ 2506.148872] Freezing user space processes ... (elapsed 0.462 seconds) done. [ 2506.611880] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2506.613528] PM: Entering mem sleep [ 2506.613711] Suspending console(s) (use no_console_suspend to debug) [ 2506.614344] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2506.862046] sd 0:0:0:0: [sda] Stopping disk [ 2507.498235] PM: suspend of devices complete after 883.325 msecs [ 2507.514271] PM: late suspend of devices complete after 15.990 msecs [ 2507.515344] tg3 0000:02:00.0: System wakeup enabled by ACPI [ 2507.515534] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 2507.530389] PM: noirq suspend of devices complete after 16.097 msecs [ 2507.530663] ACPI: Preparing to enter system sleep state S3 [ 2507.534166] PM: Saving platform NVS memory [ 2507.535174] Disabling non-boot CPUs ... [ 2507.535234] intel_pstate CPU 1 exiting [ 2507.535500] Broke affinity for irq 23 [ 2507.535538] Broke affinity for irq 28 [ 2507.535544] Broke affinity for irq 29 [ 2507.536570] smpboot: CPU 1 is now offline [ 2507.538053] ACPI: Low-level resume complete [ 2507.538106] PM: Restoring platform NVS memory [ 2507.538703] Enabling non-boot CPUs ... [ 2507.538746] x86: Booting SMP configuration: [ 2507.538747] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 2507.552484] CPU1 is up [ 2507.553807] ACPI: Waking up from system sleep state S3 [ 2507.668320] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2507.668738] PM: noirq resume of devices complete after 15.182 msecs [ 2507.668968] PM: early resume of devices complete after 0.163 msecs [ 2507.671826] tg3 0000:02:00.0: System wakeup disabled by ACPI [ 2507.684743] sd 0:0:0:0: [sda] Starting disk [ 2507.984139] rtc_cmos 00:01: System wakeup disabled by ACPI [ 2508.324772] usb 1-1.3: reset high-speed USB device number 3 using ehci-pci [ 2508.460624] PM: resume of devices complete after 790.831 msecs [ 2508.460821] PM: Finishing wakeup. [ 2508.460822] Restarting tasks ... done. [ 2509.033183] ata2.01: failed to resume link (SControl 0) [ 2509.033290] ata1.01: failed to resume link (SControl 0) [ 2509.189463] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2509.189486] ata2.01: SATA link down (SStatus 0 SControl 0) [ 2509.189503] ata2.01: link offline, clearing class 3 to NONE [ 2509.245663] ata2.00: configured for UDMA/100 [ 2509.777183] psmouse serio1: synaptics: queried max coordinates: x [..5774], y [..5022] [ 2510.550845] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2510.550866] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2510.824067] ata1.00: configured for UDMA/133 [ 2511.988819] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2519.846273] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex [ 2519.846296] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX [ 2519.846301] tg3 0000:02:00.0 eth0: EEE is disabled [ 2522.999585] usb 2-1.2: new high-speed USB device number 5 using ehci-pci [ 2523.092563] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=3440 [ 2523.092571] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2523.092575] usb 2-1.2: Product: SCX-4623FW Series [ 2523.092579] usb 2-1.2: Manufacturer: Samsung Electronics Co., Ltd. [ 2523.092582] usb 2-1.2: SerialNumber: Z4YSBFFZ800983J [ 2523.093861] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3440 [ 2525.527249] usblp1: removed [ 2525.528619] usblp 2-1.2:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3440 [ 4398.282810] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 8345.930711] Adding 4881404k swap on /dev/sda5. Priority:-1 extents:1 across:4881404k FS [10029.666096] PM: Syncing filesystems ... done. [10030.089643] PM: Preparing system for mem sleep [10030.089822] Freezing user space processes ... (elapsed 0.089 seconds) done. [10030.179475] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [10030.181015] PM: Entering mem sleep [10030.181175] Suspending console(s) (use no_console_suspend to debug) [10030.181874] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10030.343134] sd 0:0:0:0: [sda] Stopping disk [10030.978468] PM: suspend of devices complete after 796.084 msecs [10030.994503] PM: late suspend of devices complete after 16.004 msecs [10030.995729] tg3 0000:02:00.0: System wakeup enabled by ACPI [10030.995940] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [10031.010650] PM: noirq suspend of devices complete after 16.123 msecs [10031.011045] ACPI: Preparing to enter system sleep state S3 [10031.014413] PM: Saving platform NVS memory [10031.015857] Disabling non-boot CPUs ... [10031.015918] intel_pstate CPU 1 exiting [10031.016301] Broke affinity for irq 29 [10031.017342] smpboot: CPU 1 is now offline [10031.019240] ACPI: Low-level resume complete [10031.019295] PM: Restoring platform NVS memory [10031.019878] Enabling non-boot CPUs ... [10031.019921] x86: Booting SMP configuration: [10031.019922] smpboot: Booting Node 0 Processor 1 APIC 0x2 [10031.033231] CPU1 is up [10031.034557] ACPI: Waking up from system sleep state S3 [10031.161061] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [10031.161151] PM: noirq resume of devices complete after 15.190 msecs [10031.161386] PM: early resume of devices complete after 0.169 msecs [10031.164440] tg3 0000:02:00.0: System wakeup disabled by ACPI [10031.167101] tg3 0000:02:00.0 eth0: Link is down [10031.168619] sd 0:0:0:0: [sda] Starting disk [10031.496778] usb 1-1.3: reset high-speed USB device number 3 using ehci-pci [10031.532754] rtc_cmos 00:01: System wakeup disabled by ACPI [10031.632756] PM: resume of devices complete after 470.849 msecs [10031.632911] PM: Finishing wakeup. [10031.632912] Restarting tasks ... done. [10032.513655] ata1.01: failed to resume link (SControl 0) [10032.513760] ata2.01: failed to resume link (SControl 0) [10032.669965] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10032.669988] ata2.01: SATA link down (SStatus 0 SControl 0) [10032.670005] ata2.01: link offline, clearing class 3 to NONE [10032.726197] ata2.00: configured for UDMA/100 [10032.845347] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex [10032.845351] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX [10032.845354] tg3 0000:02:00.0 eth0: EEE is disabled [10033.580910] psmouse serio1: synaptics: queried max coordinates: x [..5774], y [..5022] [10034.071468] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [10034.071501] ata1.01: SATA link down (SStatus 0 SControl 0) [10034.344474] ata1.00: configured for UDMA/133 [10037.628524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [10040.082247] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex [10040.082252] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX [10040.082254] tg3 0000:02:00.0 eth0: EEE is disabled [11838.055083] PM: Syncing filesystems ... done. [11838.224902] PM: Preparing system for mem sleep [11838.225071] Freezing user space processes ... (elapsed 0.001 seconds) done. [11838.226796] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [11838.228143] PM: Entering mem sleep [11838.228218] Suspending console(s) (use no_console_suspend to debug) [11838.228478] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11838.277413] sd 0:0:0:0: [sda] Stopping disk [11838.910556] PM: suspend of devices complete after 681.681 msecs [11838.926605] PM: late suspend of devices complete after 16.030 msecs [11838.927518] tg3 0000:02:00.0: System wakeup enabled by ACPI [11838.927638] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [11838.942667] PM: noirq suspend of devices complete after 16.046 msecs [11838.942830] ACPI: Preparing to enter system sleep state S3 [11838.946487] PM: Saving platform NVS memory [11838.947151] Disabling non-boot CPUs ... [11838.947196] intel_pstate CPU 1 exiting [11838.948431] smpboot: CPU 1 is now offline [11838.949629] ACPI: Low-level resume complete [11838.949684] PM: Restoring platform NVS memory [11838.950272] Enabling non-boot CPUs ... [11838.950315] x86: Booting SMP configuration: [11838.950316] smpboot: Booting Node 0 Processor 1 APIC 0x2 [11838.963607] CPU1 is up [11838.964950] ACPI: Waking up from system sleep state S3 [11839.084670] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [11839.084844] PM: noirq resume of devices complete after 15.171 msecs [11839.085078] PM: early resume of devices complete after 0.168 msecs [11839.085364] tg3 0000:02:00.0: System wakeup disabled by ACPI [11839.087911] tg3 0000:02:00.0 eth0: Link is down [11839.091641] sd 0:0:0:0: [sda] Starting disk [11839.444341] rtc_cmos 00:01: System wakeup disabled by ACPI [11839.461276] usb 1-1.3: reset high-speed USB device number 3 using ehci-pci [11839.612240] PM: resume of devices complete after 526.741 msecs [11839.612442] PM: Finishing wakeup. [11839.612444] Restarting tasks ... done. [11840.452987] ata1.01: failed to resume link (SControl 0) [11840.593073] ata2.01: failed to resume link (SControl 0) [11840.750201] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [11840.750224] ata2.01: SATA link down (SStatus 0 SControl 0) [11840.750241] ata2.01: link offline, clearing class 3 to NONE [11840.763357] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex [11840.763361] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX [11840.763363] tg3 0000:02:00.0 eth0: EEE is disabled [11840.809469] ata2.00: configured for UDMA/100 [11841.470672] psmouse serio1: synaptics: queried max coordinates: x [..5774], y [..5022] [11841.990252] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [11841.990275] ata1.01: SATA link down (SStatus 0 SControl 0) [11842.259101] ata1.00: configured for UDMA/133 [11842.960699] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [11845.245543] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex [11845.245548] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX [11845.245550] tg3 0000:02:00.0 eth0: EEE is disabled