x0, writing 0xd050d050) [ 2956.763056] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [ 2956.763065] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 2956.763071] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 2956.763107] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40b) [ 2956.763118] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xd041d041) [ 2956.763123] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 2956.763128] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020) [ 2956.763137] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 2956.763144] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 2956.763176] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 2956.763194] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0609000) [ 2956.763201] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 2956.763231] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 2956.763236] ehci_hcd 0000:00:1d.0: PME# disabled [ 2956.763302] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 2956.763388] iwlwifi 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 2956.763428] iwlwifi 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004) [ 2956.763437] iwlwifi 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 2956.763450] iwlwifi 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 2956.763632] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 2956.763688] r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd040000c) [ 2956.763711] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd040400c) [ 2956.763734] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001) [ 2956.763750] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 2956.763773] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 2956.764027] PM: early resume of devices complete after 1.343 msecs [ 2956.764112] i915 0000:00:02.0: setting latency timer to 64 [ 2956.764131] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2956.764143] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2956.764171] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2956.764183] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 2956.764186] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 2956.764219] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2956.764237] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2956.764241] ahci 0000:00:1f.2: setting latency timer to 64 [ 2956.764275] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 2956.764277] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 2956.764300] r8169 0000:03:00.0: PME# disabled [ 2956.778552] sd 0:0:0:0: [sda] Starting disk [ 2956.895173] PM: resume of drv:r8169 dev:0000:03:00.0 complete after 131.094 msecs [ 2956.942309] PM: resume of drv:hub dev:2-1:1.0 complete after 176.702 msecs [ 2956.942316] PM: resume of drv:hub dev:1-1:1.0 complete after 176.723 msecs [ 2956.942321] PM: resume of drv: dev:ep_00 complete after 176.696 msecs [ 2956.942326] PM: resume of drv: dev:ep_00 complete after 176.715 msecs [ 2956.942331] PM: resume of drv: dev:ep_81 complete after 176.711 msecs [ 2956.942335] PM: resume of drv: dev:ep_81 complete after 176.737 msecs [ 2957.014376] usb 2-1.3: reset full-speed USB device number 3 using ehci_hcd [ 2957.098054] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2957.106019] ata4: SATA link down (SStatus 0 SControl 300) [ 2957.107547] PM: resume of drv:usb dev:2-1.3:1.0 complete after 342.071 msecs [ 2957.107552] PM: resume of drv: dev:ep_00 complete after 342.050 msecs [ 2957.107560] PM: resume of drv: dev:ep_02 complete after 342.072 msecs [ 2957.107588] PM: resume of drv: dev:ep_81 complete after 342.106 msecs [ 2957.114980] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 351.334 msecs [ 2957.116822] ata5.00: configured for UDMA/33 [ 2957.121971] ata6: SATA link down (SStatus 0 SControl 300) [ 2957.144797] PM: resume of drv:i915 dev:0000:00:02.0 complete after 381.256 msecs [ 2957.178153] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd [ 2957.270774] PM: resume of drv:i2400m_usb dev:1-1.4:1.0 complete after 505.632 msecs [ 2957.270792] i2400m_usb 1-1.4:1.0: device reset on resume: reinitializing driver [ 2957.270801] PM: resume of drv: dev:ep_82 complete after 505.650 msecs [ 2957.270816] PM: resume of drv: dev:ep_01 complete after 505.679 msecs [ 2957.270824] PM: resume of drv: dev:ep_00 complete after 505.668 msecs [ 2957.270829] PM: resume of drv: dev:ep_02 complete after 505.680 msecs [ 2957.270836] PM: resume of drv: dev:ep_81 complete after 505.694 msecs [ 2957.270964] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: loading from cache [ 2957.345880] usb 2-1.6: reset high-speed USB device number 4 using ehci_hcd [ 2957.442101] PM: resume of drv: dev:ep_00 complete after 677.073 msecs [ 2957.442106] PM: resume of drv:rts5139 dev:2-1.6:1.0 complete after 677.096 msecs [ 2957.442134] PM: resume of drv: dev:ep_01 complete after 677.123 msecs [ 2957.442187] PM: resume of drv:scsi dev:host6 complete after 677.160 msecs [ 2957.442195] PM: resume of drv: dev:ep_83 complete after 677.174 msecs [ 2957.442198] PM: resume of drv:scsi dev:target6:0:0 complete after 677.166 msecs [ 2957.442201] PM: resume of drv: dev:ep_82 complete after 677.182 msecs [ 2957.442211] PM: resume of drv:scsi_host dev:host6 complete after 677.181 msecs [ 2957.442214] PM: resume of drv:sd dev:6:0:0:0 complete after 677.179 msecs [ 2957.442222] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 677.185 msecs [ 2957.509615] usb 1-1.5: reset high-speed USB device number 4 using ehci_hcd [ 2957.864435] PM: resume of drv: dev:ep_00 complete after 1100.098 msecs [ 2957.864440] PM: resume of drv:uvcvideo dev:1-1.5:1.1 complete after 1100.107 msecs [ 2957.864446] PM: resume of drv:uvcvideo dev:1-1.5:1.0 complete after 1100.129 msecs [ 2957.864489] PM: resume of drv: dev:ep_87 complete after 1100.168 msecs [ 2959.294761] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2959.610117] ata1.00: configured for UDMA/133 [ 2959.632676] PM: resume of drv:sd dev:0:0:0:0 complete after 2871.111 msecs [ 2959.632736] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2857.691 msecs [ 2959.632741] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2871.169 msecs [ 2959.632876] PM: resume of devices complete after 2873.094 msecs [ 2959.632956] PM: resume devices took 2.872 seconds [ 2959.633083] PM: Finishing wakeup. [ 2959.633084] Restarting tasks ... done. [ 2959.634361] video LNXVIDEO:01: Restoring backlight state [ 2960.253594] r8169 0000:03:00.0: PME# enabled [ 2960.528366] i2400m_usb 1-1.4:1.0: firmware interface version 9.3.2 [ 2960.536697] ADDRCONF(NETDEV_UP): wmx0: link is not ready [ 2960.541076] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 2960.541316] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 2960.614063] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 2960.629127] r8169 0000:03:00.0: PME# disabled [ 2960.764534] r8169 0000:03:00.0: eth1: link down [ 2960.764743] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2963.277482] wlan1: authenticate with 00:26:50:b2:24:09 (try 1) [ 2963.280085] wlan1: authenticated [ 2963.288748] wlan1: associate with 00:26:50:b2:24:09 (try 1) [ 2963.293663] wlan1: RX AssocResp from 00:26:50:b2:24:09 (capab=0x431 status=0 aid=3) [ 2963.293668] wlan1: associated [ 2963.298226] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 2963.298331] cfg80211: Calling CRDA for country: US [ 2963.302170] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302175] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302177] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302180] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302183] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302186] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302188] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302191] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302193] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302196] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302199] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302202] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302204] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302207] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302209] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302212] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302214] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302217] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302220] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302223] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302225] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 2963.302228] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302230] cfg80211: Disabling freq 2467 MHz [ 2963.302232] cfg80211: Disabling freq 2472 MHz [ 2963.302235] cfg80211: Regulatory domain changed to country: US [ 2963.302237] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2963.302239] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2963.302242] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 2963.302244] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2963.302247] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2963.302249] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2963.302252] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2974.364265] wlan1: no IPv6 routers present [ 3049.413619] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 3049.413640] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 3050.032914] wlan1: deauthenticating from 00:26:50:b2:24:09 by local choice (reason=3) [ 3050.084389] cfg80211: All devices are disconnected, going to restore regulatory settings [ 3050.084403] cfg80211: Restoring regulatory settings [ 3050.084415] cfg80211: Calling CRDA to update world regulatory domain [ 3050.094618] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 3050.094628] cfg80211: World regulatory domain updated: [ 3050.094633] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3050.094641] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3050.094648] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3050.094655] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3050.094662] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3050.094668] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3050.279979] r8169 0000:03:00.0: PME# enabled [ 3050.922836] r8169 0000:03:00.0: PME# disabled [ 3052.392277] PM: Syncing filesystems ... done. [ 3052.457047] PM: Preparing system for mem sleep [ 3052.892985] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: cached [ 3052.892990] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 3052.907462] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 3052.923440] PM: Entering mem sleep [ 3052.923494] Suspending console(s) (use no_console_suspend to debug) [ 3052.923748] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3052.923978] sd 0:0:0:0: [sda] Stopping disk [ 3052.928057] i2400m_usb 1-1.4:1.0: failed to suspend, will reset on resume [ 3052.975306] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 3052.975323] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 3053.267309] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 3053.282854] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.284 msecs [ 3053.542171] PM: suspend of drv:sd dev:0:0:0:0 complete after 619.339 msecs [ 3053.542202] PM: suspend of drv:scsi dev:target0:0:0 complete after 619.363 msecs [ 3053.542236] PM: suspend of drv:scsi dev:host0 complete after 583.265 msecs [ 3053.562439] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 603.311 msecs [ 3053.562489] PM: suspend of drv: dev:pci0000:00 complete after 603.306 msecs [ 3053.562507] PM: suspend of devices complete after 639.861 msecs [ 3053.562510] PM: suspend devices took 0.640 seconds [ 3053.562901] r8169 0000:03:00.0: PME# enabled [ 3053.562912] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 3053.594502] ehci_hcd 0000:00:1d.0: PME# enabled [ 3053.594546] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 3053.610623] ehci_hcd 0000:00:1a.0: PME# enabled [ 3053.610666] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 3053.642361] PM: late suspend of devices complete after 79.964 msecs [ 3053.642629] ACPI: Preparing to enter system sleep state S3 [ 3053.702528] PM: Saving platform NVS memory [ 3053.703912] Disabling non-boot CPUs ... [ 3053.806052] CPU 1 is now offline [ 3053.909898] CPU 2 is now offline [ 3054.013741] CPU 3 is now offline [ 3054.014175] Extended CMOS year: 2000 [ 3054.014523] ACPI: Low-level resume complete [ 3054.014562] PM: Restoring platform NVS memory [ 3054.015185] Extended CMOS year: 2000 [ 3054.015221] Enabling non-boot CPUs ... [ 3054.015355] Booting Node 0 Processor 1 APIC 0x1 [ 3054.015357] smpboot cpu 1: start_ip = 99000 [ 3054.025669] Initializing CPU#1 [ 3054.026368] Calibrating delay loop (skipped) already calibrated this CPU [ 3054.026381] Disabled fast string operations [ 3054.046784] NMI watchdog enabled, takes one hw-pmu counter. [ 3054.047058] CPU1 is up [ 3054.047157] Booting Node 0 Processor 2 APIC 0x2 [ 3054.047158] smpboot cpu 2: start_ip = 99000 [ 3054.057451] Initializing CPU#2 [ 3054.058168] Calibrating delay loop (skipped) already calibrated this CPU [ 3054.058179] Disabled fast string operations [ 3054.078760] NMI watchdog enabled, takes one hw-pmu counter. [ 3054.079105] CPU2 is up [ 3054.079232] Booting Node 0 Processor 3 APIC 0x3 [ 3054.079234] smpboot cpu 3: start_ip = 99000 [ 3054.089527] Initializing CPU#3 [ 3054.090244] Calibrating delay loop (skipped) already calibrated this CPU [ 3054.090255] Disabled fast string operations [ 3054.110897] NMI watchdog enabled, takes one hw-pmu counter. [ 3054.111298] CPU3 is up [ 3054.115527] ACPI: Waking up from system sleep state S3 [ 3054.294542] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 3054.294553] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 3054.294577] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 3054.294592] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xd0605004) [ 3054.294621] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 3054.294638] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xd060a000) [ 3054.294646] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 3054.294685] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 3054.294691] ehci_hcd 0000:00:1a.0: PME# disabled [ 3054.294708] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 3054.294724] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0600004) [ 3054.294729] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 3054.294735] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 3054.294766] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 3054.294777] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 3054.294783] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 3054.294788] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 3054.294797] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 3054.294803] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 3054.294839] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 3054.294850] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 3054.294856] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd050d050) [ 3054.294861] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [ 3054.294870] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 3054.294876] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 3054.294912] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40b) [ 3054.294923] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xd041d041) [ 3054.294928] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 3054.294934] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020) [ 3054.294942] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 3054.294949] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 3054.294982] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 3054.295000] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0609000) [ 3054.295008] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 3054.295039] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 3054.295044] ehci_hcd 0000:00:1d.0: PME# disabled [ 3054.295109] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 3054.295196] iwlwifi 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 3054.295236] iwlwifi 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004) [ 3054.295246] iwlwifi 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 3054.295258] iwlwifi 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 3054.295441] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 3054.295497] r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd040000c) [ 3054.295520] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd040400c) [ 3054.295543] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001) [ 3054.295559] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 3054.295582] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 3054.295836] PM: early resume of devices complete after 1.346 msecs [ 3054.295922] i915 0000:00:02.0: setting latency timer to 64 [ 3054.295979] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 3054.296008] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3054.296018] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3054.296022] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3054.296031] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 3054.296061] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3054.296075] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3054.296101] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 3054.296113] ahci 0000:00:1f.2: setting latency timer to 64 [ 3054.296185] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 3054.296200] r8169 0000:03:00.0: PME# disabled [ 3054.310336] sd 0:0:0:0: [sda] Starting disk [ 3054.426986] PM: resume of drv:r8169 dev:0000:03:00.0 complete after 130.999 msecs [ 3054.474131] PM: resume of drv: dev:ep_00 complete after 176.977 msecs [ 3054.474141] PM: resume of drv:hub dev:2-1:1.0 complete after 177.003 msecs [ 3054.474178] PM: resume of drv:hub dev:1-1:1.0 complete after 178.110 msecs [ 3054.474184] PM: resume of drv: dev:ep_00 complete after 177.052 msecs [ 3054.474189] PM: resume of drv: dev:ep_81 complete after 177.041 msecs [ 3054.474194] PM: resume of drv: dev:ep_81 complete after 178.122 msecs [ 3054.546152] usb 2-1.6: reset high-speed USB device number 4 using ehci_hcd [ 3054.641796] ata6: SATA link down (SStatus 0 SControl 300) [ 3054.642707] PM: resume of drv:rts5139 dev:2-1.6:1.0 complete after 345.692 msecs [ 3054.642736] PM: resume of drv: dev:ep_01 complete after 345.723 msecs [ 3054.642745] PM: resume of drv: dev:ep_83 complete after 345.720 msecs [ 3054.642762] PM: resume of drv:scsi dev:host6 complete after 345.739 msecs [ 3054.642771] PM: resume of drv:scsi_host dev:host6 complete after 345.745 msecs [ 3054.642780] PM: resume of drv:scsi dev:target6:0:0 complete after 345.748 msecs [ 3054.642785] PM: resume of drv: dev:ep_82 complete after 345.767 msecs [ 3054.642792] PM: resume of drv: dev:ep_00 complete after 345.771 msecs [ 3054.642813] PM: resume of drv:sd dev:6:0:0:0 complete after 345.781 msecs [ 3054.642822] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 345.786 msecs [ 3054.649788] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3054.650788] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 355.308 msecs [ 3054.657792] ata4: SATA link down (SStatus 0 SControl 300) [ 3054.668778] ata5.00: configured for UDMA/33 [ 3054.676663] PM: resume of drv:i915 dev:0000:00:02.0 complete after 381.313 msecs [ 3054.709892] usb 1-1.5: reset high-speed USB device number 4 using ehci_hcd [ 3054.873667] usb 2-1.3: reset full-speed USB device number 3 using ehci_hcd [ 3054.967023] PM: resume of drv: dev:ep_00 complete after 670.495 msecs [ 3054.967070] PM: resume of drv:usb dev:2-1.3:1.0 complete after 670.562 msecs [ 3054.967114] PM: resume of drv: dev:ep_81 complete after 670.601 msecs [ 3054.967119] PM: resume of drv: dev:ep_02 complete after 670.599 msecs [ 3055.037426] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd [ 3055.064680] PM: resume of drv: dev:ep_00 complete after 768.307 msecs [ 3055.064704] PM: resume of drv:uvcvideo dev:1-1.5:1.0 complete after 768.362 msecs [ 3055.064710] PM: resume of drv:uvcvideo dev:1-1.5:1.1 complete after 768.352 msecs [ 3055.064716] PM: resume of drv: dev:ep_87 complete after 768.368 msecs [ 3055.129965] i2400m_usb 1-1.4:1.0: device reset on resume: reinitializing driver [ 3055.129972] PM: resume of drv:i2400m_usb dev:1-1.4:1.0 complete after 833.778 msecs [ 3055.129977] PM: resume of drv: dev:ep_00 complete after 833.752 msecs [ 3055.129985] PM: resume of drv: dev:ep_01 complete after 833.793 msecs [ 3055.129990] PM: resume of drv: dev:ep_81 complete after 833.790 msecs [ 3055.129994] PM: resume of drv: dev:ep_02 complete after 833.790 msecs [ 3055.130003] PM: resume of drv: dev:ep_82 complete after 833.795 msecs [ 3055.130073] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: loading from cache [ 3056.754661] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3057.069968] ata1.00: configured for UDMA/133 [ 3057.092672] PM: resume of drv:sd dev:0:0:0:0 complete after 2800.512 msecs [ 3057.092698] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2785.655 msecs [ 3057.092703] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2800.544 msecs [ 3057.092840] PM: resume of devices complete after 2801.141 msecs [ 3057.092921] PM: resume devices took 2.800 seconds [ 3057.093049] PM: Finishing wakeup. [ 3057.093051] Restarting tasks ... done. [ 3057.094732] video LNXVIDEO:01: Restoring backlight state [ 3057.687762] init: anacron main process (10159) killed by TERM signal [ 3057.774371] r8169 0000:03:00.0: PME# enabled [ 3058.392192] i2400m_usb 1-1.4:1.0: firmware interface version 9.3.2 [ 3058.400789] ADDRCONF(NETDEV_UP): wmx0: link is not ready [ 3058.404486] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 3058.404692] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 3058.481748] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 3058.496433] r8169 0000:03:00.0: PME# disabled [ 3058.631828] r8169 0000:03:00.0: eth1: link down [ 3058.632158] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 3060.381343] wlan1: authenticate with 00:26:50:b2:24:09 (try 1) [ 3060.385254] wlan1: authenticated [ 3060.389580] wlan1: associate with 00:26:50:b2:24:09 (try 1) [ 3060.394426] wlan1: RX AssocResp from 00:26:50:b2:24:09 (capab=0x431 status=0 aid=5) [ 3060.394431] wlan1: associated [ 3060.398986] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 3060.399182] cfg80211: Calling CRDA for country: US [ 3060.408049] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408061] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408068] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408075] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408081] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408088] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408094] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408101] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408107] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408114] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408120] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408128] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408134] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408141] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408147] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408154] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408160] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408168] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408173] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408181] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408186] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 3060.408194] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408199] cfg80211: Disabling freq 2467 MHz [ 3060.408203] cfg80211: Disabling freq 2472 MHz [ 3060.408211] cfg80211: Regulatory domain changed to country: US [ 3060.408216] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3060.408222] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 3060.408229] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 3060.408235] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3060.408242] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3060.408248] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3060.408255] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3070.805698] wlan1: no IPv6 routers present [ 3289.530109] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 3289.530121] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 3351.192183] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 3351.192197] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 3381.419928] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 3381.419937] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 3648.984682] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 3648.984703] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 3675.089575] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 3675.089596] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 4017.551954] wlan1: deauthenticating from 00:26:50:b2:24:09 by local choice (reason=3) [ 4017.648475] cfg80211: All devices are disconnected, going to restore regulatory settings [ 4017.648490] cfg80211: Restoring regulatory settings [ 4017.648502] cfg80211: Calling CRDA to update world regulatory domain [ 4017.658399] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 4017.658409] cfg80211: World regulatory domain updated: [ 4017.658413] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4017.658421] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4017.658429] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4017.658436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4017.658442] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4017.658449] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4022.882930] init: anacron main process (12339) killed by TERM signal [ 4023.300082] PM: Syncing filesystems ... done. [ 4023.544371] PM: Preparing system for mem sleep [ 4023.992913] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: cached [ 4023.992919] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 4024.006672] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 4024.022662] PM: Entering mem sleep [ 4024.022704] Suspending console(s) (use no_console_suspend to debug) [ 4024.023078] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4024.032889] sd 0:0:0:0: [sda] Stopping disk [ 4024.074439] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 4024.150306] i2400m_usb 1-1.4:1.0: TX: can't get autopm: -13 [ 4024.198352] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 4024.198358] PM: suspend of drv:ehci_hcd dev:0000:00:1a.0 complete after 139.316 msecs [ 4024.366518] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 4024.382017] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.248 msecs [ 4024.649546] PM: suspend of drv:sd dev:0:0:0:0 complete after 627.397 msecs [ 4024.649586] PM: suspend of drv:scsi dev:target0:0:0 complete after 627.420 msecs [ 4024.649602] PM: suspend of drv:scsi dev:host0 complete after 591.542 msecs [ 4024.673636] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 615.354 msecs [ 4024.673655] PM: suspend of drv: dev:pci0000:00 complete after 615.197 msecs [ 4024.673685] PM: suspend of devices complete after 651.848 msecs [ 4024.673688] PM: suspend devices took 0.652 seconds [ 4024.674079] r8169 0000:03:00.0: PME# enabled [ 4024.674090] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 4024.705693] ehci_hcd 0000:00:1d.0: PME# enabled [ 4024.705737] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 4024.721779] ehci_hcd 0000:00:1a.0: PME# enabled [ 4024.721821] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 4024.753557] PM: late suspend of devices complete after 79.981 msecs [ 4024.753825] ACPI: Preparing to enter system sleep state S3 [ 4024.813708] PM: Saving platform NVS memory [ 4024.814787] Disabling non-boot CPUs ... [ 4024.917246] CPU 1 is now offline [ 4025.021099] CPU 2 is now offline [ 4025.124942] CPU 3 is now offline [ 4025.125381] Extended CMOS year: 2000 [ 4025.125730] ACPI: Low-level resume complete [ 4025.125768] PM: Restoring platform NVS memory [ 4025.126390] Extended CMOS year: 2000 [ 4025.126426] Enabling non-boot CPUs ... [ 4025.126559] Booting Node 0 Processor 1 APIC 0x1 [ 4025.126561] smpboot cpu 1: start_ip = 99000 [ 4025.136873] Initializing CPU#1 [ 4025.137573] Calibrating delay loop (skipped) already calibrated this CPU [ 4025.137585] Disabled fast string operations [ 4025.157684] i2400m_usb 1-1.4:1.0: timeout waiting for reply to message 0x5606 [ 4025.157688] i2400m_usb 1-1.4:1.0: Failed to issue 'Enter power save' command: -110 [ 4025.157971] NMI watchdog enabled, takes one hw-pmu counter. [ 4025.158242] CPU1 is up [ 4025.158341] Booting Node 0 Processor 2 APIC 0x2 [ 4025.158343] smpboot cpu 2: start_ip = 99000 [ 4025.168635] Initializing CPU#2 [ 4025.169353] Calibrating delay loop (skipped) already calibrated this CPU [ 4025.169364] Disabled fast string operations [ 4025.189948] NMI watchdog enabled, takes one hw-pmu counter. [ 4025.190337] CPU2 is up [ 4025.190463] Booting Node 0 Processor 3 APIC 0x3 [ 4025.190466] smpboot cpu 3: start_ip = 99000 [ 4025.200758] Initializing CPU#3 [ 4025.201475] Calibrating delay loop (skipped) already calibrated this CPU [ 4025.201486] Disabled fast string operations [ 4025.222142] NMI watchdog enabled, takes one hw-pmu counter. [ 4025.222575] CPU3 is up [ 4025.226806] ACPI: Waking up from system sleep state S3 [ 4025.405747] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4025.405759] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 4025.405782] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4025.405798] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xd0605004) [ 4025.405827] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4025.405845] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xd060a000) [ 4025.405853] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 4025.405891] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 4025.405898] ehci_hcd 0000:00:1a.0: PME# disabled [ 4025.405915] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4025.405930] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0600004) [ 4025.405936] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4025.405942] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 4025.405974] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4025.405984] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 4025.405990] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 4025.405995] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [ 4025.406004] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4025.406010] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 4025.406047] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 4025.406058] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 4025.406063] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd050d050) [ 4025.406069] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [ 4025.406078] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4025.406084] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4025.406120] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40b) [ 4025.406131] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xd041d041) [ 4025.406137] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 4025.406142] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020) [ 4025.406151] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4025.406157] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4025.406190] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4025.406208] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0609000) [ 4025.406216] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 4025.406246] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 4025.406251] ehci_hcd 0000:00:1d.0: PME# disabled [ 4025.406317] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 4025.406404] iwlwifi 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4025.406444] iwlwifi 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004) [ 4025.406454] iwlwifi 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4025.406466] iwlwifi 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 4025.406656] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 4025.406712] r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd040000c) [ 4025.406735] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd040400c) [ 4025.406758] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001) [ 4025.406774] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4025.406797] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 4025.407056] PM: early resume of devices complete after 1.362 msecs [ 4025.407123] i915 0000:00:02.0: setting latency timer to 64 [ 4025.407187] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 4025.407230] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4025.407239] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4025.407265] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4025.407273] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4025.407303] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4025.407317] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4025.407331] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 4025.407360] ahci 0000:00:1f.2: setting latency timer to 64 [ 4025.407407] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 4025.407426] r8169 0000:03:00.0: PME# disabled [ 4025.421557] sd 0:0:0:0: [sda] Starting disk [ 4025.538198] PM: resume of drv:r8169 dev:0000:03:00.0 complete after 130.990 msecs [ 4025.585353] PM: resume of drv: dev:ep_00 complete after 177.201 msecs [ 4025.585360] PM: resume of drv:hub dev:2-1:1.0 complete after 177.260 msecs [ 4025.585365] PM: resume of drv:hub dev:1-1:1.0 complete after 177.356 msecs [ 4025.585378] PM: resume of drv: dev:ep_00 complete after 177.324 msecs [ 4025.585385] PM: resume of drv: dev:ep_81 complete after 177.258 msecs [ 4025.585393] PM: resume of drv: dev:ep_81 complete after 177.362 msecs [ 4025.657440] usb 2-1.3: reset full-speed USB device number 3 using ehci_hcd [ 4025.741077] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4025.749066] ata4: SATA link down (SStatus 0 SControl 300) [ 4025.750610] PM: resume of drv:usb dev:2-1.3:1.0 complete after 342.064 msecs [ 4025.750615] PM: resume of drv: dev:ep_00 complete after 342.001 msecs [ 4025.750624] PM: resume of drv: dev:ep_02 complete after 342.040 msecs [ 4025.750653] PM: resume of drv: dev:ep_81 complete after 342.088 msecs [ 4025.757996] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 351.256 msecs [ 4025.759921] ata5.00: configured for UDMA/33 [ 4025.765039] ata6: SATA link down (SStatus 0 SControl 300) [ 4025.795824] PM: resume of drv:i915 dev:0000:00:02.0 complete after 389.286 msecs [ 4025.821037] usb 1-1.5: reset high-speed USB device number 4 using ehci_hcd [ 4025.984740] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd [ 4026.077580] i2400m_usb 1-1.4:1.0: device reset on resume: reinitializing driver [ 4026.077621] PM: resume of drv:i2400m_usb dev:1-1.4:1.0 complete after 670.155 msecs [ 4026.077626] PM: resume of drv: dev:ep_00 complete after 670.011 msecs [ 4026.077652] PM: resume of drv: dev:ep_01 complete after 670.163 msecs [ 4026.077655] PM: resume of drv: dev:ep_81 complete after 670.140 msecs [ 4026.077668] PM: resume of drv: dev:ep_02 complete after 670.129 msecs [ 4026.077671] PM: resume of drv: dev:ep_82 complete after 670.103 msecs [ 4026.077696] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: loading from cache [ 4026.148714] usb 2-1.6: reset high-speed USB device number 4 using ehci_hcd [ 4026.175857] PM: resume of drv:uvcvideo dev:1-1.5:1.1 complete after 768.011 msecs [ 4026.175862] PM: resume of drv: dev:ep_00 complete after 767.988 msecs [ 4026.175870] PM: resume of drv:uvcvideo dev:1-1.5:1.0 complete after 768.079 msecs [ 4026.175912] PM: resume of drv: dev:ep_87 complete after 768.092 msecs [ 4026.249461] PM: resume of drv: dev:ep_00 complete after 841.465 msecs [ 4026.249466] PM: resume of drv:rts5139 dev:2-1.6:1.0 complete after 841.556 msecs [ 4026.249479] PM: resume of drv: dev:ep_82 complete after 841.534 msecs [ 4026.249484] PM: resume of drv: dev:ep_01 complete after 841.554 msecs [ 4026.249487] PM: resume of drv: dev:ep_83 complete after 841.517 msecs [ 4026.249503] PM: resume of drv:scsi dev:host6 complete after 841.500 msecs [ 4026.249514] PM: resume of drv:scsi dev:target6:0:0 complete after 841.471 msecs [ 4026.249518] PM: resume of drv:scsi_host dev:host6 complete after 841.492 msecs [ 4026.249528] PM: resume of drv:sd dev:6:0:0:0 complete after 841.463 msecs [ 4026.249536] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 841.452 msecs [ 4027.881836] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4028.204576] ata1.00: configured for UDMA/133 [ 4028.226533] PM: resume of drv:sd dev:0:0:0:0 complete after 2822.529 msecs [ 4028.226578] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2808.449 msecs [ 4028.226583] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2822.551 msecs [ 4028.226718] PM: resume of devices complete after 2823.832 msecs [ 4028.226800] PM: resume devices took 2.824 seconds [ 4028.227007] PM: Finishing wakeup. [ 4028.227009] Restarting tasks ... done. [ 4028.229337] video LNXVIDEO:01: Restoring backlight state [ 4028.816791] init: anacron main process (12868) killed by TERM signal [ 4028.903599] r8169 0000:03:00.0: PME# enabled [ 4029.347229] i2400m_usb 1-1.4:1.0: firmware interface version 9.3.2 [ 4029.355617] ADDRCONF(NETDEV_UP): wmx0: link is not ready [ 4029.358876] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 4029.359122] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 4029.438069] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 4029.451869] r8169 0000:03:00.0: PME# disabled [ 4029.587270] r8169 0000:03:00.0: eth1: link down [ 4029.587456] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4031.396625] wlan1: authenticate with 00:26:50:b2:24:09 (try 1) [ 4031.398806] wlan1: authenticated [ 4031.399436] wlan1: associate with 00:26:50:b2:24:09 (try 1) [ 4031.402569] wlan1: RX AssocResp from 00:26:50:b2:24:09 (capab=0x431 status=0 aid=5) [ 4031.402581] wlan1: associated [ 4031.407264] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 4031.407503] cfg80211: Calling CRDA for country: US [ 4031.416995] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417000] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417003] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417006] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417008] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417011] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417014] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417017] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417019] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417022] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417025] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417028] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417030] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417033] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417035] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417038] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417041] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417044] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417046] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417049] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417051] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 4031.417054] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417057] cfg80211: Disabling freq 2467 MHz [ 4031.417058] cfg80211: Disabling freq 2472 MHz [ 4031.417061] cfg80211: Regulatory domain changed to country: US [ 4031.417063] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4031.417066] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4031.417069] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 4031.417071] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4031.417074] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4031.417076] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4031.417079] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 4042.368203] wlan1: no IPv6 routers present [ 4194.478103] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 4194.478112] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 4236.853119] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 4236.853127] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 4257.306633] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 4257.306642] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 4280.736563] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 4280.736571] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 5140.104986] wlan1: deauthenticating from 00:26:50:b2:24:09 by local choice (reason=3) [ 5140.178282] cfg80211: All devices are disconnected, going to restore regulatory settings [ 5140.178297] cfg80211: Restoring regulatory settings [ 5140.178309] cfg80211: Calling CRDA to update world regulatory domain [ 5140.188099] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 5140.188109] cfg80211: World regulatory domain updated: [ 5140.188114] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5140.188122] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5140.188129] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5140.188136] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5140.188143] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5140.188149] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5140.402197] r8169 0000:03:00.0: PME# enabled [ 5140.973123] r8169 0000:03:00.0: PME# disabled [ 5141.721488] init: anacron main process (15451) killed by TERM signal [ 5142.683616] PM: Syncing filesystems ... done. [ 5142.990397] PM: Preparing system for mem sleep [ 5143.430118] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: cached [ 5143.430123] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 5143.445064] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 5143.461025] PM: Entering mem sleep [ 5143.461077] Suspending console(s) (use no_console_suspend to debug) [ 5143.461412] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5143.461840] sd 0:0:0:0: [sda] Stopping disk [ 5143.466294] i2400m_usb 1-1.4:1.0: failed to suspend, will reset on resume [ 5143.512882] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 5143.512903] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 5143.804829] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 5143.820433] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.243 msecs [ 5144.081816] PM: suspend of drv:sd dev:0:0:0:0 complete after 621.316 msecs [ 5144.081863] PM: suspend of drv:scsi dev:target0:0:0 complete after 621.330 msecs [ 5144.081910] PM: suspend of drv:scsi dev:host0 complete after 585.344 msecs [ 5144.104012] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 607.269 msecs [ 5144.104062] PM: suspend of drv: dev:pci0000:00 complete after 607.120 msecs [ 5144.104083] PM: suspend of devices complete after 643.861 msecs [ 5144.104086] PM: suspend devices took 0.644 seconds [ 5144.104473] r8169 0000:03:00.0: PME# enabled [ 5144.104484] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 5144.136076] ehci_hcd 0000:00:1d.0: PME# enabled [ 5144.136120] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 5144.152161] ehci_hcd 0000:00:1a.0: PME# enabled [ 5144.152205] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 5144.183938] PM: late suspend of devices complete after 79.963 msecs [ 5144.184205] ACPI: Preparing to enter system sleep state S3 [ 5144.244094] PM: Saving platform NVS memory [ 5144.245202] Disabling non-boot CPUs ... [ 5144.347623] CPU 1 is now offline [ 5144.451465] CPU 2 is now offline [ 5144.555321] CPU 3 is now offline [ 5144.555752] Extended CMOS year: 2000 [ 5144.556101] ACPI: Low-level resume complete [ 5144.556140] PM: Restoring platform NVS memory [ 5144.556763] Extended CMOS year: 2000 [ 5144.556799] Enabling non-boot CPUs ... [ 5144.556938] Booting Node 0 Processor 1 APIC 0x1 [ 5144.556940] smpboot cpu 1: start_ip = 99000 [ 5144.567252] Initializing CPU#1 [ 5144.567951] Calibrating delay loop (skipped) already calibrated this CPU [ 5144.567964] Disabled fast string operations [ 5144.588378] NMI watchdog enabled, takes one hw-pmu counter. [ 5144.588650] CPU1 is up [ 5144.588747] Booting Node 0 Processor 2 APIC 0x2 [ 5144.588749] smpboot cpu 2: start_ip = 99000 [ 5144.599041] Initializing CPU#2 [ 5144.599759] Calibrating delay loop (skipped) already calibrated this CPU [ 5144.599770] Disabled fast string operations [ 5144.620279] NMI watchdog enabled, takes one hw-pmu counter. [ 5144.620652] CPU2 is up [ 5144.620780] Booting Node 0 Processor 3 APIC 0x3 [ 5144.620782] smpboot cpu 3: start_ip = 99000 [ 5144.631074] Initializing CPU#3 [ 5144.631791] Calibrating delay loop (skipped) already calibrated this CPU [ 5144.631802] Disabled fast string operations [ 5144.652449] NMI watchdog enabled, takes one hw-pmu counter. [ 5144.652846] CPU3 is up [ 5144.657094] ACPI: Waking up from system sleep state S3 [ 5144.836145] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5144.836156] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 5144.836180] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5144.836196] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xd0605004) [ 5144.836225] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5144.836242] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xd060a000) [ 5144.836250] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 5144.836289] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 5144.836295] ehci_hcd 0000:00:1a.0: PME# disabled [ 5144.836312] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5144.836328] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0600004) [ 5144.836333] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5144.836339] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 5144.836371] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5144.836383] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 5144.836388] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 5144.836393] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 5144.836402] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5144.836409] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 5144.836445] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 5144.836456] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 5144.836462] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd050d050) [ 5144.836467] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [ 5144.836476] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5144.836482] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5144.836518] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40b) [ 5144.836529] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xd041d041) [ 5144.836534] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 5144.836540] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020) [ 5144.836548] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5144.836555] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5144.836588] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5144.836606] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0609000) [ 5144.836614] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 5144.836644] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 5144.836649] ehci_hcd 0000:00:1d.0: PME# disabled [ 5144.836715] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 5144.836799] iwlwifi 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5144.836840] iwlwifi 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004) [ 5144.836849] iwlwifi 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5144.836861] iwlwifi 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 5144.837041] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 5144.837097] r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd040000c) [ 5144.837120] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd040400c) [ 5144.837143] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001) [ 5144.837159] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5144.837182] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 5144.837436] PM: early resume of devices complete after 1.344 msecs [ 5144.837553] i915 0000:00:02.0: setting latency timer to 64 [ 5144.837565] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5144.837576] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5144.837606] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5144.837619] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 5144.837623] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 5144.837679] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5144.837683] ahci 0000:00:1f.2: setting latency timer to 64 [ 5144.837694] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5144.837700] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 5144.837720] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 5144.837741] r8169 0000:03:00.0: PME# disabled [ 5144.851904] sd 0:0:0:0: [sda] Starting disk [ 5144.852677] Extended CMOS year: 2000 [ 5144.968491] PM: resume of drv:r8169 dev:0000:03:00.0 complete after 130.967 msecs [ 5145.015604] PM: resume of drv:hub dev:1-1:1.0 complete after 177.379 msecs [ 5145.015614] PM: resume of drv: dev:ep_00 complete after 177.339 msecs [ 5145.015624] PM: resume of drv: dev:ep_81 complete after 177.380 msecs [ 5145.015673] PM: resume of drv:hub dev:2-1:1.0 complete after 177.361 msecs [ 5145.015683] PM: resume of drv: dev:ep_81 complete after 177.351 msecs [ 5145.015686] PM: resume of drv: dev:ep_00 complete after 177.329 msecs [ 5145.087738] usb 2-1.6: reset high-speed USB device number 4 using ehci_hcd [ 5145.179426] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5145.184274] PM: resume of drv:rts5139 dev:2-1.6:1.0 complete after 345.692 msecs [ 5145.184300] PM: resume of drv: dev:ep_82 complete after 345.681 msecs [ 5145.184358] PM: resume of drv: dev:ep_01 complete after 345.763 msecs [ 5145.184363] PM: resume of drv:scsi dev:host6 complete after 345.686 msecs [ 5145.184373] PM: resume of drv:scsi_host dev:host6 complete after 345.682 msecs [ 5145.184376] PM: resume of drv:scsi dev:target6:0:0 complete after 345.666 msecs [ 5145.184380] PM: resume of drv: dev:ep_00 complete after 345.728 msecs [ 5145.184384] PM: resume of drv: dev:ep_83 complete after 345.749 msecs [ 5145.184390] PM: resume of drv:sd dev:6:0:0:0 complete after 345.662 msecs [ 5145.184400] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 345.653 msecs [ 5145.187365] ata6: SATA link down (SStatus 0 SControl 300) [ 5145.192290] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 355.220 msecs [ 5145.195642] ata4: SATA link down (SStatus 0 SControl 300) [ 5145.198179] ata5.00: configured for UDMA/33 [ 5145.222207] PM: resume of drv:i915 dev:0000:00:02.0 complete after 385.235 msecs [ 5145.251490] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd [ 5145.344122] PM: resume of drv:i2400m_usb dev:1-1.4:1.0 complete after 506.192 msecs [ 5145.344138] i2400m_usb 1-1.4:1.0: device reset on resume: reinitializing driver [ 5145.344149] PM: resume of drv: dev:ep_81 complete after 506.182 msecs [ 5145.344155] PM: resume of drv: dev:ep_82 complete after 506.145 msecs [ 5145.344161] PM: resume of drv: dev:ep_02 complete after 506.171 msecs [ 5145.344165] PM: resume of drv: dev:ep_01 complete after 506.218 msecs [ 5145.344181] PM: resume of drv: dev:ep_00 complete after 506.149 msecs [ 5145.344321] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: loading from cache [ 5145.415426] usb 2-1.3: reset full-speed USB device number 3 using ehci_hcd [ 5145.512375] PM: resume of drv: dev:ep_00 complete after 674.316 msecs [ 5145.512430] PM: resume of drv:usb dev:2-1.3:1.0 complete after 674.438 msecs [ 5145.512447] PM: resume of drv: dev:ep_02 complete after 674.416 msecs [ 5145.512470] PM: resume of drv: dev:ep_81 complete after 674.459 msecs [ 5145.582991] usb 1-1.5: reset high-speed USB device number 4 using ehci_hcd [ 5145.938009] PM: resume of drv:uvcvideo dev:1-1.5:1.0 complete after 1100.744 msecs [ 5145.938045] PM: resume of drv: dev:ep_87 complete after 1100.770 msecs [ 5145.938049] PM: resume of drv: dev:ep_00 complete after 1100.728 msecs [ 5145.938055] PM: resume of drv:uvcvideo dev:1-1.5:1.1 complete after 1100.758 msecs [ 5147.240326] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5147.561700] ata1.00: configured for UDMA/133 [ 5147.583678] PM: resume of drv:sd dev:0:0:0:0 complete after 2749.334 msecs [ 5147.583709] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2749.353 msecs [ 5147.583745] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2735.109 msecs [ 5147.583879] PM: resume of devices complete after 2750.480 msecs [ 5147.583960] PM: resume devices took 2.752 seconds [ 5147.584087] PM: Finishing wakeup. [ 5147.584089] Restarting tasks ... done. [ 5147.585905] video LNXVIDEO:01: Restoring backlight state [ 5148.275877] init: anacron main process (15930) killed by TERM signal [ 5148.378963] r8169 0000:03:00.0: PME# enabled [ 5148.596831] i2400m_usb 1-1.4:1.0: firmware interface version 9.3.2 [ 5148.608875] ADDRCONF(NETDEV_UP): wmx0: link is not ready [ 5148.610399] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 5148.610610] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 5148.688884] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 5148.706507] r8169 0000:03:00.0: PME# disabled [ 5148.841924] r8169 0000:03:00.0: eth1: link down [ 5148.842634] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5150.617643] wlan1: authenticate with 00:26:50:b2:24:09 (try 1) [ 5150.620227] wlan1: authenticated [ 5150.620497] wlan1: associate with 00:26:50:b2:24:09 (try 1) [ 5150.622544] wlan1: RX AssocResp from 00:26:50:b2:24:09 (capab=0x431 status=0 aid=6) [ 5150.622560] wlan1: associated [ 5150.627655] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 5150.628071] cfg80211: Calling CRDA for country: US [ 5150.637287] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637298] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637305] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637313] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637319] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637327] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637332] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637340] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637346] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637353] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637359] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637367] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637372] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637380] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637386] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637393] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637399] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637407] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637413] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637420] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637426] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 5150.637433] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637439] cfg80211: Disabling freq 2467 MHz [ 5150.637443] cfg80211: Disabling freq 2472 MHz [ 5150.637450] cfg80211: Regulatory domain changed to country: US [ 5150.637455] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5150.637462] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5150.637468] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5150.637474] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5150.637481] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5150.637487] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5150.637493] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5161.550948] wlan1: no IPv6 routers present [ 5373.138725] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 5373.138734] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 5503.883982] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 5503.884003] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 5629.219431] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 5629.219452] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 8650.703477] wlan1: deauthenticating from 00:26:50:b2:24:09 by local choice (reason=3) [ 8650.840330] cfg80211: All devices are disconnected, going to restore regulatory settings [ 8650.840338] cfg80211: Restoring regulatory settings [ 8650.840342] cfg80211: Calling CRDA to update world regulatory domain [ 8650.893115] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 8650.893121] cfg80211: World regulatory domain updated: [ 8650.893123] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8650.893128] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8650.893131] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8650.893135] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8650.893138] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8650.893142] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8652.187823] init: anacron main process (22258) killed by TERM signal [ 8653.172672] PM: Syncing filesystems ... done. [ 8653.253544] PM: Preparing system for mem sleep [ 8653.792113] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: cached [ 8653.792118] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 8653.807733] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8653.823706] PM: Entering mem sleep [ 8653.823748] Suspending console(s) (use no_console_suspend to debug) [ 8653.824122] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8653.824430] sd 0:0:0:0: [sda] Stopping disk [ 8653.875581] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 8653.952667] i2400m_usb 1-1.4:1.0: TX: can't get autopm: -13 [ 8653.999404] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 8653.999410] PM: suspend of drv:ehci_hcd dev:0000:00:1a.0 complete after 139.380 msecs [ 8654.167628] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 8654.183117] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.384 msecs [ 8654.441732] PM: suspend of drv:sd dev:0:0:0:0 complete after 618.526 msecs [ 8654.441790] PM: suspend of drv:scsi dev:target0:0:0 complete after 618.511 msecs [ 8654.441836] PM: suspend of drv:scsi dev:host0 complete after 582.772 msecs [ 8654.462714] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 603.506 msecs [ 8654.462759] PM: suspend of drv: dev:pci0000:00 complete after 603.115 msecs [ 8654.462827] PM: suspend of devices complete after 639.930 msecs [ 8654.462830] PM: suspend devices took 0.640 seconds [ 8654.463215] r8169 0000:03:00.0: PME# enabled [ 8654.463226] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 8654.494776] ehci_hcd 0000:00:1d.0: PME# enabled [ 8654.494822] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 8654.510862] ehci_hcd 0000:00:1a.0: PME# enabled [ 8654.510906] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 8654.542637] PM: late suspend of devices complete after 79.919 msecs [ 8654.542904] ACPI: Preparing to enter system sleep state S3 [ 8654.602788] PM: Saving platform NVS memory [ 8654.603837] Disabling non-boot CPUs ... [ 8654.706330] CPU 1 is now offline [ 8654.810174] CPU 2 is now offline [ 8654.914022] CPU 3 is now offline [ 8654.914455] Extended CMOS year: 2000 [ 8654.914803] ACPI: Low-level resume complete [ 8654.914841] PM: Restoring platform NVS memory [ 8654.915467] Extended CMOS year: 2000 [ 8654.915503] Enabling non-boot CPUs ... [ 8654.915640] Booting Node 0 Processor 1 APIC 0x1 [ 8654.915641] smpboot cpu 1: start_ip = 99000 [ 8654.925954] Initializing CPU#1 [ 8654.926653] Calibrating delay loop (skipped) already calibrated this CPU [ 8654.926666] Disabled fast string operations [ 8654.947048] NMI watchdog enabled, takes one hw-pmu counter. [ 8654.947307] CPU1 is up [ 8654.947407] Booting Node 0 Processor 2 APIC 0x2 [ 8654.947409] smpboot cpu 2: start_ip = 99000 [ 8654.950910] i2400m_usb 1-1.4:1.0: timeout waiting for reply to message 0x5606 [ 8654.950914] i2400m_usb 1-1.4:1.0: Failed to issue 'Enter power save' command: -110 [ 8654.957701] Initializing CPU#2 [ 8654.958419] Calibrating delay loop (skipped) already calibrated this CPU [ 8654.958430] Disabled fast string operations [ 8654.978940] NMI watchdog enabled, takes one hw-pmu counter. [ 8654.979304] CPU2 is up [ 8654.979429] Booting Node 0 Processor 3 APIC 0x3 [ 8654.979431] smpboot cpu 3: start_ip = 99000 [ 8654.989723] Initializing CPU#3 [ 8654.990440] Calibrating delay loop (skipped) already calibrated this CPU [ 8654.990451] Disabled fast string operations [ 8655.011165] NMI watchdog enabled, takes one hw-pmu counter. [ 8655.011579] CPU3 is up [ 8655.015812] ACPI: Waking up from system sleep state S3 [ 8655.199251] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8655.199277] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 8655.199331] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8655.199366] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xd0605004) [ 8655.199426] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8655.199461] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xd060a000) [ 8655.199477] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 8655.199571] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 8655.199583] ehci_hcd 0000:00:1a.0: PME# disabled [ 8655.199618] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8655.199653] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0600004) [ 8655.199664] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 8655.199678] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 8655.199742] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8655.199765] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 8655.199776] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 8655.199788] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [ 8655.199806] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 8655.199819] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 8655.199893] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 8655.199916] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 8655.199927] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd050d050) [ 8655.199938] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [ 8655.199956] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 8655.199970] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 8655.200043] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40b) [ 8655.200066] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xd041d041) [ 8655.200077] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 8655.200088] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020) [ 8655.200105] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 8655.200119] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 8655.200185] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 8655.200221] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0609000) [ 8655.200237] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 8655.200303] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 8655.200313] ehci_hcd 0000:00:1d.0: PME# disabled [ 8655.200447] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 8655.200607] iwlwifi 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 8655.200666] iwlwifi 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004) [ 8655.200680] iwlwifi 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 8655.200698] iwlwifi 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 8655.200937] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 8655.201005] r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd040000c) [ 8655.201034] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd040400c) [ 8655.201064] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001) [ 8655.201085] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 8655.201114] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 8655.201506] PM: early resume of devices complete after 2.368 msecs [ 8655.201634] i915 0000:00:02.0: setting latency timer to 64 [ 8655.201695] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8655.201712] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8655.201745] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 8655.201771] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8655.201786] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 8655.201950] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 8655.201998] ahci 0000:00:1f.2: setting latency timer to 64 [ 8655.202164] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8655.202180] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8655.202297] sd 0:0:0:0: [sda] Starting disk [ 8655.202371] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 8655.202395] r8169 0000:03:00.0: PME# disabled [ 8655.331256] PM: resume of drv:r8169 dev:0000:03:00.0 complete after 129.525 msecs [ 8655.378417] PM: resume of drv: dev:ep_00 complete after 169.940 msecs [ 8655.378468] PM: resume of drv:hub dev:1-1:1.0 complete after 174.046 msecs [ 8655.378490] PM: resume of drv:hub dev:2-1:1.0 complete after 171.703 msecs [ 8655.378529] PM: resume of drv: dev:ep_00 complete after 171.945 msecs [ 8655.378566] PM: resume of drv: dev:ep_81 complete after 171.651 msecs [ 8655.378577] PM: resume of drv: dev:ep_81 complete after 172.158 msecs [ 8655.450455] usb 2-1.6: reset high-speed USB device number 4 using ehci_hcd [ 8655.526141] ata6: SATA link down (SStatus 0 SControl 300) [ 8655.534141] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8655.542113] ata4: SATA link down (SStatus 0 SControl 300) [ 8655.550997] PM: resume of drv:rts5139 dev:2-1.6:1.0 complete after 341.952 msecs [ 8655.551009] PM: resume of drv: dev:ep_00 complete after 341.775 msecs [ 8655.551031] PM: resume of drv: dev:ep_01 complete after 341.947 msecs [ 8655.551044] PM: resume of drv:scsi dev:host6 complete after 341.781 msecs [ 8655.551056] PM: resume of drv: dev:ep_83 complete after 341.869 msecs [ 8655.551066] PM: resume of drv: dev:ep_82 complete after 341.915 msecs [ 8655.551076] PM: resume of drv:scsi_host dev:host6 complete after 341.778 msecs [ 8655.551112] PM: resume of drv:scsi dev:target6:0:0 complete after 341.767 msecs [ 8655.551140] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 349.903 msecs [ 8655.551155] PM: resume of drv:sd dev:6:0:0:0 complete after 341.770 msecs [ 8655.551182] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 341.753 msecs [ 8655.552927] ata5.00: configured for UDMA/33 [ 8655.618205] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd [ 8655.659115] PM: resume of drv:i915 dev:0000:00:02.0 complete after 458.180 msecs [ 8655.710572] i2400m_usb 1-1.4:1.0: device reset on resume: reinitializing driver [ 8655.710612] PM: resume of drv:i2400m_usb dev:1-1.4:1.0 complete after 502.533 msecs [ 8655.710623] PM: resume of drv: dev:ep_00 complete after 502.329 msecs [ 8655.710649] PM: resume of drv: dev:ep_01 complete after 502.531 msecs [ 8655.710681] PM: resume of drv: dev:ep_82 complete after 502.441 msecs [ 8655.710688] PM: resume of drv: dev:ep_81 complete after 502.523 msecs [ 8655.710695] PM: resume of drv: dev:ep_02 complete after 502.496 msecs [ 8655.710984] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: loading from cache [ 8655.781957] usb 2-1.3: reset full-speed USB device number 3 using ehci_hcd [ 8655.875371] PM: resume of drv:usb dev:2-1.3:1.0 complete after 667.020 msecs [ 8655.875383] PM: resume of drv: dev:ep_00 complete after 666.900 msecs [ 8655.875404] PM: resume of drv: dev:ep_02 complete after 666.979 msecs [ 8655.875450] PM: resume of drv: dev:ep_81 complete after 667.061 msecs [ 8655.945712] usb 1-1.5: reset high-speed USB device number 4 using ehci_hcd [ 8656.300498] PM: resume of drv: dev:ep_00 complete after 1092.862 msecs [ 8656.300510] PM: resume of drv:uvcvideo dev:1-1.5:1.1 complete after 1092.912 msecs [ 8656.300522] PM: resume of drv:uvcvideo dev:1-1.5:1.0 complete after 1093.020 msecs [ 8656.300600] PM: resume of drv: dev:ep_87 complete after 1093.054 msecs [ 8657.754769] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8658.075857] ata1.00: configured for UDMA/133 [ 8658.098449] PM: resume of drv:sd dev:0:0:0:0 complete after 2900.461 msecs [ 8658.098496] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2900.156 msecs [ 8658.098506] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2894.165 msecs [ 8658.098793] PM: resume of devices complete after 2901.551 msecs [ 8658.098974] PM: resume devices took 2.904 seconds [ 8658.099480] PM: Finishing wakeup. [ 8658.099484] Restarting tasks ... done. [ 8658.102843] video LNXVIDEO:01: Restoring backlight state [ 8659.014823] i2400m_usb 1-1.4:1.0: firmware interface version 9.3.2 [ 8659.636108] ADDRCONF(NETDEV_UP): wmx0: link is not ready [ 8659.638149] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 8659.638394] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 8659.721779] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 8659.861299] r8169 0000:03:00.0: eth1: link down [ 8659.863857] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8661.767102] wlan1: authenticate with 00:26:50:b2:24:09 (try 1) [ 8661.769219] wlan1: authenticated [ 8661.769642] wlan1: associate with 00:26:50:b2:24:09 (try 1) [ 8661.772314] wlan1: RX AssocResp from 00:26:50:b2:24:09 (capab=0x431 status=0 aid=2) [ 8661.772322] wlan1: associated [ 8661.776984] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 8661.777089] cfg80211: Calling CRDA for country: US [ 8661.782950] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 8661.782955] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.782957] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 8661.782960] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.782963] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 8661.782966] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.782968] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 8661.782971] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.782973] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 8661.782976] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.782979] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 8661.782982] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.782984] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 8661.782987] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.782989] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 8661.782992] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.782994] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 8661.782997] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.783000] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 8661.783003] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.783005] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 8661.783008] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.783010] cfg80211: Disabling freq 2467 MHz [ 8661.783012] cfg80211: Disabling freq 2472 MHz [ 8661.783015] cfg80211: Regulatory domain changed to country: US [ 8661.783017] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8661.783020] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8661.783022] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 8661.783025] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8661.783027] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8661.783030] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8661.783032] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 8672.404914] wlan1: no IPv6 routers present [ 8733.346414] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 8733.346438] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 8748.007675] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 8748.007688] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 8756.997635] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 8756.997667] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 8770.954947] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 8770.954956] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 8788.452042] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 8788.452063] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 8808.831599] wlan1: deauthenticating from 00:26:50:b2:24:09 by local choice (reason=3) [ 8808.898153] cfg80211: All devices are disconnected, going to restore regulatory settings [ 8808.898165] cfg80211: Restoring regulatory settings [ 8808.898175] cfg80211: Calling CRDA to update world regulatory domain [ 8808.908157] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 8808.908167] cfg80211: World regulatory domain updated: [ 8808.908172] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8808.908180] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8808.908188] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8808.908195] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8808.908201] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8808.908208] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8814.782182] PM: Syncing filesystems ... done. [ 8815.096716] PM: Preparing system for mem sleep [ 8815.809734] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: cached [ 8815.809739] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 8815.823554] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8815.839539] PM: Entering mem sleep [ 8815.839584] Suspending console(s) (use no_console_suspend to debug) [ 8815.839861] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8815.840392] sd 0:0:0:0: [sda] Stopping disk [ 8815.891383] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 8815.908396] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 8815.908404] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 8815.966656] i2400m_usb 1-1.4:1.0: TX: can't get autopm: -13 [ 8816.011206] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 8816.011242] PM: suspend of drv:ehci_hcd dev:0000:00:1a.0 complete after 135.313 msecs [ 8816.183308] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 8816.198924] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.266 msecs [ 8816.459987] PM: suspend of drv:sd dev:0:0:0:0 complete after 621.048 msecs [ 8816.460032] PM: suspend of drv:scsi dev:target0:0:0 complete after 621.103 msecs [ 8816.460107] PM: suspend of drv:scsi dev:host0 complete after 585.082 msecs [ 8816.482503] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 607.343 msecs [ 8816.482532] PM: suspend of drv: dev:pci0000:00 complete after 607.274 msecs [ 8816.482562] PM: suspend of devices complete after 643.834 msecs [ 8816.482565] PM: suspend devices took 0.644 seconds [ 8816.482955] r8169 0000:03:00.0: PME# enabled [ 8816.482965] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 8816.514575] ehci_hcd 0000:00:1d.0: PME# enabled [ 8816.514620] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 8816.530662] ehci_hcd 0000:00:1a.0: PME# enabled [ 8816.530707] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 8816.562437] PM: late suspend of devices complete after 79.983 msecs [ 8816.562705] ACPI: Preparing to enter system sleep state S3 [ 8816.622595] PM: Saving platform NVS memory [ 8816.623698] Disabling non-boot CPUs ... [ 8816.726122] CPU 1 is now offline [ 8816.829972] CPU 2 is now offline [ 8816.933817] CPU 3 is now offline [ 8816.934244] Extended CMOS year: 2000 [ 8816.934593] ACPI: Low-level resume complete [ 8816.934632] PM: Restoring platform NVS memory [ 8816.935256] Extended CMOS year: 2000 [ 8816.935292] Enabling non-boot CPUs ... [ 8816.935426] Booting Node 0 Processor 1 APIC 0x1 [ 8816.935428] smpboot cpu 1: start_ip = 99000 [ 8816.945740] Initializing CPU#1 [ 8816.946439] Calibrating delay loop (skipped) already calibrated this CPU [ 8816.946452] Disabled fast string operations [ 8816.966536] i2400m_usb 1-1.4:1.0: timeout waiting for reply to message 0x5606 [ 8816.966539] i2400m_usb 1-1.4:1.0: Failed to issue 'Enter power save' command: -110 [ 8816.966857] NMI watchdog enabled, takes one hw-pmu counter. [ 8816.967125] CPU1 is up [ 8816.967224] Booting Node 0 Processor 2 APIC 0x2 [ 8816.967226] smpboot cpu 2: start_ip = 99000 [ 8816.977518] Initializing CPU#2 [ 8816.978236] Calibrating delay loop (skipped) already calibrated this CPU [ 8816.978247] Disabled fast string operations [ 8816.998860] NMI watchdog enabled, takes one hw-pmu counter. [ 8816.999248] CPU2 is up [ 8816.999373] Booting Node 0 Processor 3 APIC 0x3 [ 8816.999376] smpboot cpu 3: start_ip = 99000 [ 8817.009668] Initializing CPU#3 [ 8817.010385] Calibrating delay loop (skipped) already calibrated this CPU [ 8817.010396] Disabled fast string operations [ 8817.031052] NMI watchdog enabled, takes one hw-pmu counter. [ 8817.031452] CPU3 is up [ 8817.035702] ACPI: Waking up from system sleep state S3 [ 8817.214617] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8817.214628] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 8817.214652] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8817.214668] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xd0605004) [ 8817.214697] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8817.214714] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xd060a000) [ 8817.214722] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 8817.214760] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 8817.214766] ehci_hcd 0000:00:1a.0: PME# disabled [ 8817.214783] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8817.214799] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0600004) [ 8817.214804] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 8817.214811] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 8817.214843] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8817.214854] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 8817.214859] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 8817.214865] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 8817.214873] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 8817.214880] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 8817.214917] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 8817.214928] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 8817.214934] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd050d050) [ 8817.214939] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [ 8817.214948] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 8817.214954] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 8817.214990] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40b) [ 8817.215001] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xd041d041) [ 8817.215006] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 8817.215011] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020) [ 8817.215020] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 8817.215027] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 8817.215059] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 8817.215077] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0609000) [ 8817.215085] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 8817.215116] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 8817.215121] ehci_hcd 0000:00:1d.0: PME# disabled [ 8817.215186] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 8817.215272] iwlwifi 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 8817.215312] iwlwifi 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004) [ 8817.215321] iwlwifi 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 8817.215333] iwlwifi 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 8817.215512] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 8817.215568] r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd040000c) [ 8817.215591] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd040400c) [ 8817.215614] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001) [ 8817.215630] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 8817.215653] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 8817.215918] PM: early resume of devices complete after 1.354 msecs [ 8817.216006] i915 0000:00:02.0: setting latency timer to 64 [ 8817.216066] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 8817.216095] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8817.216107] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8817.216111] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8817.216119] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 8817.216149] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8817.216163] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8817.216192] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 8817.216200] ahci 0000:00:1f.2: setting latency timer to 64 [ 8817.216272] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 8817.216288] r8169 0000:03:00.0: PME# disabled [ 8817.230438] sd 0:0:0:0: [sda] Starting disk [ 8817.347066] PM: resume of drv:r8169 dev:0000:03:00.0 complete after 130.993 msecs [ 8817.394225] PM: resume of drv:hub dev:2-1:1.0 complete after 177.684 msecs [ 8817.394232] PM: resume of drv: dev:ep_00 complete after 177.559 msecs [ 8817.394242] PM: resume of drv: dev:ep_81 complete after 177.667 msecs [ 8817.394247] PM: resume of drv: dev:ep_00 complete after 177.726 msecs [ 8817.394258] PM: resume of drv:hub dev:1-1:1.0 complete after 177.833 msecs [ 8817.394272] PM: resume of drv: dev:ep_81 complete after 177.819 msecs [ 8817.466371] usb 2-1.6: reset high-speed USB device number 4 using ehci_hcd [ 8817.549966] ata4: SATA link down (SStatus 0 SControl 300) [ 8817.557913] ata6: SATA link down (SStatus 0 SControl 300) [ 8817.562738] PM: resume of drv: dev:ep_00 complete after 345.334 msecs [ 8817.562742] PM: resume of drv:rts5139 dev:2-1.6:1.0 complete after 345.428 msecs [ 8817.562756] PM: resume of drv: dev:ep_82 complete after 345.414 msecs [ 8817.562768] PM: resume of drv: dev:ep_83 complete after 345.402 msecs [ 8817.562773] PM: resume of drv: dev:ep_01 complete after 345.452 msecs [ 8817.562777] PM: resume of drv:scsi dev:host6 complete after 345.356 msecs [ 8817.562784] PM: resume of drv:scsi_host dev:host6 complete after 345.350 msecs [ 8817.562788] PM: resume of drv:scsi dev:target6:0:0 complete after 345.333 msecs [ 8817.562801] PM: resume of drv:sd dev:6:0:0:0 complete after 345.326 msecs [ 8817.562808] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 345.311 msecs [ 8817.565932] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8817.566821] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 351.245 msecs [ 8817.584712] ata5.00: configured for UDMA/33 [ 8817.608771] PM: resume of drv:i915 dev:0000:00:02.0 complete after 393.355 msecs [ 8817.633925] usb 1-1.5: reset high-speed USB device number 4 using ehci_hcd [ 8817.797747] usb 2-1.3: reset full-speed USB device number 3 using ehci_hcd [ 8817.891051] PM: resume of drv: dev:ep_00 complete after 674.492 msecs [ 8817.891056] PM: resume of drv:usb dev:2-1.3:1.0 complete after 674.581 msecs [ 8817.891067] PM: resume of drv: dev:ep_02 complete after 674.531 msecs [ 8817.891097] PM: resume of drv: dev:ep_81 complete after 674.581 msecs [ 8817.961511] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd [ 8817.988672] PM: resume of drv:uvcvideo dev:1-1.5:1.1 complete after 772.434 msecs [ 8817.988677] PM: resume of drv: dev:ep_00 complete after 772.400 msecs [ 8817.988685] PM: resume of drv:uvcvideo dev:1-1.5:1.0 complete after 772.463 msecs [ 8817.988728] PM: resume of drv: dev:ep_87 complete after 772.499 msecs [ 8818.053869] i2400m_usb 1-1.4:1.0: device reset on resume: reinitializing driver [ 8818.053914] PM: resume of drv:i2400m_usb dev:1-1.4:1.0 complete after 838.157 msecs [ 8818.053919] PM: resume of drv: dev:ep_00 complete after 838.063 msecs [ 8818.053947] PM: resume of drv: dev:ep_82 complete after 838.104 msecs [ 8818.053950] PM: resume of drv: dev:ep_01 complete after 838.129 msecs [ 8818.053953] PM: resume of drv: dev:ep_02 complete after 838.114 msecs [ 8818.053956] PM: resume of drv: dev:ep_81 complete after 838.129 msecs [ 8818.053991] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: loading from cache [ 8819.810511] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8820.136694] ata1.00: configured for UDMA/133 [ 8820.159333] PM: resume of drv:sd dev:0:0:0:0 complete after 2947.065 msecs [ 8820.159355] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2932.564 msecs [ 8820.159376] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2947.107 msecs [ 8820.159486] PM: resume of devices complete after 2947.923 msecs [ 8820.159567] PM: resume devices took 2.948 seconds [ 8820.159776] PM: Finishing wakeup. [ 8820.159777] Restarting tasks ... done. [ 8820.162211] video LNXVIDEO:01: Restoring backlight state [ 8821.327660] i2400m_usb 1-1.4:1.0: firmware interface version 9.3.2 [ 8821.335788] ADDRCONF(NETDEV_UP): wmx0: link is not ready [ 8821.337508] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 8821.337730] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 8821.417854] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 8821.551920] r8169 0000:03:00.0: eth1: link down [ 8821.552152] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8823.364220] wlan1: authenticate with 00:26:50:b2:24:09 (try 1) [ 8823.366361] wlan1: authenticated [ 8823.367683] wlan1: associate with 00:26:50:b2:24:09 (try 1) [ 8823.369699] wlan1: RX AssocResp from 00:26:50:b2:24:09 (capab=0x431 status=0 aid=2) [ 8823.369708] wlan1: associated [ 8823.375446] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 8823.375559] cfg80211: Calling CRDA for country: US [ 8823.380182] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380189] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380192] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380197] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380200] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380206] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380209] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380213] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380217] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380221] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380224] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380228] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380231] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380235] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380239] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380243] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380246] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380250] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380253] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380257] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380260] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 8823.380264] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380267] cfg80211: Disabling freq 2467 MHz [ 8823.380270] cfg80211: Disabling freq 2472 MHz [ 8823.380274] cfg80211: Regulatory domain changed to country: US [ 8823.380277] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8823.380280] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8823.380284] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 8823.380288] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8823.380292] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8823.380296] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8823.380299] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 8832.832819] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 8832.832828] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [ 8833.462165] wlan1: no IPv6 routers present [ 8890.190937] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 8890.190949] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [24283.752860] wlan1: deauthenticating from 00:26:50:b2:24:09 by local choice (reason=3) [24283.829146] cfg80211: All devices are disconnected, going to restore regulatory settings [24283.829161] cfg80211: Restoring regulatory settings [24283.829186] cfg80211: Calling CRDA to update world regulatory domain [24283.841283] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [24283.841297] cfg80211: World regulatory domain updated: [24283.841303] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [24283.841315] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24283.841324] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [24283.841334] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [24283.841343] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24283.841353] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24286.781858] PM: Syncing filesystems ... done. [24287.184990] PM: Preparing system for mem sleep [24287.627598] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: cached [24287.627603] Freezing user space processes ... (elapsed 0.01 seconds) done. [24287.641719] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [24287.657691] PM: Entering mem sleep [24287.657732] Suspending console(s) (use no_console_suspend to debug) [24287.658117] sd 0:0:0:0: [sda] Synchronizing SCSI cache [24287.658380] sd 0:0:0:0: [sda] Stopping disk [24287.709467] ehci_hcd 0000:00:1d.0: PCI INT A disabled [24287.785449] i2400m_usb 1-1.4:1.0: TX: can't get autopm: -13 [24287.833357] ehci_hcd 0000:00:1a.0: PCI INT A disabled [24287.833376] PM: suspend of drv:ehci_hcd dev:0000:00:1a.0 complete after 138.735 msecs [24288.001548] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [24288.017098] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 322.720 msecs [24288.398668] PM: suspend of drv:sd dev:0:0:0:0 complete after 741.643 msecs [24288.398717] PM: suspend of drv:scsi dev:target0:0:0 complete after 741.654 msecs [24288.398762] PM: suspend of drv:scsi dev:host0 complete after 705.263 msecs [24288.420540] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 726.842 msecs [24288.420585] PM: suspend of drv: dev:pci0000:00 complete after 726.690 msecs [24288.420631] PM: suspend of devices complete after 763.930 msecs [24288.420634] PM: suspend devices took 0.764 seconds [24288.421022] r8169 0000:03:00.0: PME# enabled [24288.421032] r8169 0000:03:00.0: wake-up capability enabled by ACPI [24288.452562] ehci_hcd 0000:00:1d.0: PME# enabled [24288.452606] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [24288.468644] ehci_hcd 0000:00:1a.0: PME# enabled [24288.468689] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [24288.500420] PM: late suspend of devices complete after 79.898 msecs [24288.500688] ACPI: Preparing to enter system sleep state S3 [24288.560578] PM: Saving platform NVS memory [24288.561691] Disabling non-boot CPUs ... [24288.664115] CPU 1 is now offline [24288.767963] CPU 2 is now offline [24288.783928] i2400m_usb 1-1.4:1.0: timeout waiting for reply to message 0x5606 [24288.783938] i2400m_usb 1-1.4:1.0: Failed to issue 'Enter power save' command: -110 [24288.871806] CPU 3 is now offline [24288.872238] Extended CMOS year: 2000 [24288.872587] ACPI: Low-level resume complete [24288.872626] PM: Restoring platform NVS memory [24288.873250] Extended CMOS year: 2000 [24288.873286] Enabling non-boot CPUs ... [24288.873421] Booting Node 0 Processor 1 APIC 0x1 [24288.873423] smpboot cpu 1: start_ip = 99000 [24288.883735] Initializing CPU#1 [24288.884434] Calibrating delay loop (skipped) already calibrated this CPU [24288.884447] Disabled fast string operations [24288.904822] NMI watchdog enabled, takes one hw-pmu counter. [24288.905083] CPU1 is up [24288.905181] Booting Node 0 Processor 2 APIC 0x2 [24288.905183] smpboot cpu 2: start_ip = 99000 [24288.915474] Initializing CPU#2 [24288.916192] Calibrating delay loop (skipped) already calibrated this CPU [24288.916204] Disabled fast string operations [24288.936763] NMI watchdog enabled, takes one hw-pmu counter. [24288.937124] CPU2 is up [24288.937249] Booting Node 0 Processor 3 APIC 0x3 [24288.937251] smpboot cpu 3: start_ip = 99000 [24288.947543] Initializing CPU#3 [24288.948260] Calibrating delay loop (skipped) already calibrated this CPU [24288.948271] Disabled fast string operations [24288.968912] NMI watchdog enabled, takes one hw-pmu counter. [24288.969310] CPU3 is up [24288.973605] ACPI: Waking up from system sleep state S3 [24289.152629] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [24289.152640] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [24289.152663] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [24289.152679] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xd0605004) [24289.152708] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [24289.152726] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xd060a000) [24289.152734] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [24289.152772] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [24289.152778] ehci_hcd 0000:00:1a.0: PME# disabled [24289.152795] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [24289.152810] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0600004) [24289.152816] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [24289.152822] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [24289.152853] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [24289.152865] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [24289.152870] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [24289.152876] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [24289.152885] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [24289.152891] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [24289.152929] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20a) [24289.152940] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [24289.152945] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd050d050) [24289.152950] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [24289.152958] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [24289.152965] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [24289.153000] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40b) [24289.153011] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xd041d041) [24289.153017] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [24289.153022] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020) [24289.153031] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [24289.153037] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [24289.153070] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [24289.153088] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0609000) [24289.153096] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [24289.153126] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [24289.153132] ehci_hcd 0000:00:1d.0: PME# disabled [24289.153198] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [24289.153284] iwlwifi 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [24289.153324] iwlwifi 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004) [24289.153333] iwlwifi 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [24289.153346] iwlwifi 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [24289.153527] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [24289.153583] r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd040000c) [24289.153606] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd040400c) [24289.153629] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001) [24289.153645] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [24289.153663] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [24289.153920] PM: early resume of devices complete after 1.343 msecs [24289.154032] i915 0000:00:02.0: setting latency timer to 64 [24289.154050] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [24289.154056] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [24289.154066] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [24289.154076] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [24289.154103] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [24289.154122] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [24289.154129] mei 0000:00:16.0: irq 43 for MSI/MSI-X [24289.154156] ahci 0000:00:1f.2: setting latency timer to 64 [24289.154170] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [24289.154219] r8169 0000:03:00.0: wake-up capability disabled by ACPI [24289.154235] r8169 0000:03:00.0: PME# disabled [24289.156329] sd 0:0:0:0: [sda] Starting disk [24289.285048] PM: resume of drv:r8169 dev:0000:03:00.0 complete after 131.026 msecs [24289.332179] PM: resume of drv:hub dev:1-1:1.0 complete after 175.575 msecs [24289.332184] PM: resume of drv: dev:ep_00 complete after 175.481 msecs [24289.332195] PM: resume of drv:hub dev:2-1:1.0 complete after 175.433 msecs [24289.332200] PM: resume of drv: dev:ep_00 complete after 175.373 msecs [24289.332205] PM: resume of drv: dev:ep_81 complete after 175.551 msecs [24289.332225] PM: resume of drv: dev:ep_81 complete after 175.433 msecs [24289.404242] usb 1-1.5: reset high-speed USB device number 4 using ehci_hcd [24289.471975] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [24289.479955] ata4: SATA link down (SStatus 0 SControl 300) [24289.490995] ata5.00: configured for UDMA/33 [24289.495953] ata6: SATA link down (SStatus 0 SControl 300) [24289.504857] PM: resume of drv:snd_hda_intel dev:0000:00:1b.0 complete after 351.332 msecs [24289.538663] PM: resume of drv:i915 dev:0000:00:02.0 complete after 385.210 msecs [24289.568012] usb 2-1.3: reset full-speed USB device number 3 using ehci_hcd [24289.663719] PM: resume of drv: dev:ep_00 complete after 507.036 msecs [24289.663740] PM: resume of drv:usb dev:2-1.3:1.0 complete after 507.110 msecs [24289.663812] PM: resume of drv: dev:ep_81 complete after 507.164 msecs [24289.663816] PM: resume of drv: dev:ep_02 complete after 507.148 msecs [24289.731769] usb 2-1.6: reset high-speed USB device number 4 using ehci_hcd [24289.758931] PM: resume of drv:uvcvideo dev:1-1.5:1.1 complete after 602.489 msecs [24289.758935] PM: resume of drv: dev:ep_00 complete after 602.473 msecs [24289.758950] PM: resume of drv:uvcvideo dev:1-1.5:1.0 complete after 602.546 msecs [24289.758963] PM: resume of drv: dev:ep_87 complete after 602.544 msecs [24289.828456] PM: resume of drv: dev:ep_00 complete after 671.915 msecs [24289.828496] PM: resume of drv:rts5139 dev:2-1.6:1.0 complete after 672.028 msecs [24289.828528] PM: resume of drv: dev:ep_82 complete after 672.028 msecs [24289.828532] PM: resume of drv:scsi dev:host6 complete after 671.980 msecs [24289.828552] PM: resume of drv: dev:ep_01 complete after 672.070 msecs [24289.828555] PM: resume of drv: dev:ep_83 complete after 672.039 msecs [24289.828566] PM: resume of drv:scsi dev:target6:0:0 complete after 671.984 msecs [24289.828572] PM: resume of drv:scsi_host dev:host6 complete after 672.005 msecs [24289.828581] PM: resume of drv:sd dev:6:0:0:0 complete after 671.983 msecs [24289.828592] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 671.977 msecs [24289.895523] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd [24289.987907] i2400m_usb 1-1.4:1.0: device reset on resume: reinitializing driver [24289.987924] PM: resume of drv: dev:ep_00 complete after 831.881 msecs [24289.987956] PM: resume of drv:i2400m_usb dev:1-1.4:1.0 complete after 832.044 msecs [24289.987971] PM: resume of drv: dev:ep_01 complete after 832.028 msecs [24289.987975] PM: resume of drv: dev:ep_02 complete after 831.983 msecs [24289.987979] PM: resume of drv: dev:ep_81 complete after 832.001 msecs [24289.987993] PM: resume of drv: dev:ep_82 complete after 831.988 msecs [24289.988114] i2400m_usb 1-1.4:1.0: firmware i6050-fw-usb-1.5.sbcf: loading from cache [24291.556823] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [24291.876008] ata1.00: configured for UDMA/133 [24291.909840] PM: resume of drv:sd dev:0:0:0:0 complete after 2757.608 msecs [24291.909863] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2757.079 msecs [24291.909883] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2757.427 msecs [24291.910001] PM: resume of devices complete after 2760.134 msecs [24291.910083] PM: resume devices took 2.760 seconds [24291.910312] PM: Finishing wakeup. [24291.910314] Restarting tasks ... done. [24291.912640] video LNXVIDEO:01: Restoring backlight state [24293.268440] i2400m_usb 1-1.4:1.0: firmware interface version 9.3.2 [24293.276496] ADDRCONF(NETDEV_UP): wmx0: link is not ready [24293.278363] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [24293.278573] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [24293.360628] ADDRCONF(NETDEV_UP): wlan1: link is not ready [24293.497882] r8169 0000:03:00.0: eth1: link down [24293.498070] ADDRCONF(NETDEV_UP): eth1: link is not ready [24295.329061] wlan1: authenticate with 00:26:50:b2:24:09 (try 1) [24295.331292] wlan1: authenticated [24295.331747] wlan1: associate with 00:26:50:b2:24:09 (try 1) [24295.333863] wlan1: RX AssocResp from 00:26:50:b2:24:09 (capab=0x431 status=0 aid=2) [24295.333867] wlan1: associated [24295.337853] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [24295.337954] cfg80211: Calling CRDA for country: US [24295.341856] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [24295.341860] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341863] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [24295.341866] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341869] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [24295.341872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341874] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [24295.341877] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341879] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [24295.341882] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341885] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [24295.341888] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341890] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [24295.341893] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341895] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [24295.341898] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341901] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [24295.341904] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341906] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [24295.341909] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341911] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [24295.341914] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341917] cfg80211: Disabling freq 2467 MHz [24295.341918] cfg80211: Disabling freq 2472 MHz [24295.341921] cfg80211: Regulatory domain changed to country: US [24295.341923] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [24295.341926] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [24295.341929] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [24295.341931] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24295.341934] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24295.341936] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24295.341939] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [24305.715659] wlan1: no IPv6 routers present [24804.790225] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [24804.790235] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536) [24905.428656] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [24905.428665] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f742fd38), AE_NOT_FOUND (20110623/psparse-536)