[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-30-generic (buildd@aatxe) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 (Ubuntu 3.2.0-30.48-generic 3.2.27) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe92400 (usable) [ 0.000000] BIOS-e820: 00000000bfe92400 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Dell Inc. Inspiron 1520 /0UW306, BIOS A03 08/16/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbfe92 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] total RAM covered: 3071M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 35a4c000 - 36d1e000 [ 0.000000] ACPI: RSDP 000fbbf0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT bfe93e00 0005C (v01 DELL M08 27D70810 ASL 00000061) [ 0.000000] ACPI: FACP bfe93c9c 000F4 (v04 DELL M08 27D70810 ASL 00000061) [ 0.000000] ACPI: DSDT bfe94400 0565E (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS bfea2c00 00040 [ 0.000000] ACPI: HPET bfe93f00 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC bfe94000 00068 (v01 DELL M08 27D70810 ASL 00000047) [ 0.000000] ACPI: MCFG bfe93fc0 0003E (v16 DELL M08 27D70810 ASL 00000061) [ 0.000000] ACPI: SLIC bfe9409c 00176 (v01 DELL M08 27D70810 ASL 00000061) [ 0.000000] ACPI: BOOT bfe93bc0 00028 (v01 DELL M08 27D70810 ASL 00000061) [ 0.000000] ACPI: SSDT bfe92682 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2182MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfe92 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfe92 [ 0.000000] On node 0 totalpages: 785953 [ 0.000000] free_area_init_node: node 0, pgdat c1822ec0, node_mem_map f424c200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4366 pages used for memmap [ 0.000000] HighMem zone: 554374 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:34000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f77d1000 s31616 r0 d21632 u53248 [ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779811 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-30-generic root=UUID=3339aa82-50f9-4367-b2d5-a4510d1ec5c7 ro splash vga=791 quiet quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 12576800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfe92) [ 0.000000] Memory: 3076684k/3144264k available (5618k kernel code, 67128k reserved, 2762k data, 712k init, 2234960k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1830000 - 0xc18e2000 ( 712 kB) [ 0.000000] .data : 0xc157cac4 - 0xc182f5c0 (2762 kB) [ 0.000000] .text : 0xc1000000 - 0xc157cac4 (5618 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1496.214 MHz processor. [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.42 BogoMIPS (lpj=5984856) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004040] Security Framework initialized [ 0.004063] AppArmor: AppArmor initialized [ 0.004066] Yama: becoming mindful. [ 0.004144] Mount-cache hash table entries: 512 [ 0.004325] Initializing cgroup subsys cpuacct [ 0.004334] Initializing cgroup subsys memory [ 0.004345] Initializing cgroup subsys devices [ 0.004348] Initializing cgroup subsys freezer [ 0.004352] Initializing cgroup subsys blkio [ 0.004361] Initializing cgroup subsys perf_event [ 0.004397] CPU: Physical Processor ID: 0 [ 0.004400] CPU: Processor Core ID: 0 [ 0.004405] mce: CPU supports 6 MCE banks [ 0.004416] CPU0: Thermal monitoring enabled (TM2) [ 0.004421] using mwait in idle threads. [ 0.009358] ACPI: Core revision 20110623 [ 0.015712] ftrace: allocating 25901 entries in 51 pages [ 0.020060] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020545] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063129] CPU0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d [ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.064003] PEBS disabled due to CPU errata. [ 0.064003] ... version: 2 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 3 [ 0.064003] ... event mask: 0000000700000003 [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] CPU 1 irqstacks, hard=f70ea000 soft=f70ec000 [ 0.064003] Booting Node 0, Processors #1 Ok. [ 0.064003] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.152043] NMI watchdog enabled, takes one hw-pmu counter. [ 0.152092] Brought up 2 CPUs [ 0.152096] Total of 2 processors activated (5984.95 BogoMIPS). [ 0.153788] devtmpfs: initialized [ 0.153788] EVM: security.selinux [ 0.153788] EVM: security.SMACK64 [ 0.153788] EVM: security.capability [ 0.153788] print_constraints: dummy: [ 0.153788] RTC time: 16:33:07, date: 09/09/12 [ 0.153788] NET: Registered protocol family 16 [ 0.156100] Trying to unpack rootfs image as initramfs... [ 0.156141] EISA bus registered [ 0.156185] ACPI: bus type pci registered [ 0.156289] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.156294] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.156297] PCI: Using MMCONFIG for extended config space [ 0.156300] PCI: Using configuration type 1 for base access [ 0.156317] dmi type 0xB1 record - unknown flag [ 0.172091] bio: create slab at 0 [ 0.172180] ACPI: Added _OSI(Module Device) [ 0.172184] ACPI: Added _OSI(Processor Device) [ 0.172187] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.172191] ACPI: Added _OSI(Processor Aggregator Device) [ 0.174190] ACPI: EC: Look up EC in DSDT [ 0.184450] ACPI: SSDT bfe931b8 001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.184949] ACPI: Dynamic OEM Table Load: [ 0.184955] ACPI: SSDT (null) 001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.185152] ACPI: SSDT bfe92b4e 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.185623] ACPI: Dynamic OEM Table Load: [ 0.185628] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.186010] ACPI: SSDT bfe93378 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.186499] ACPI: Dynamic OEM Table Load: [ 0.186504] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.186652] ACPI: SSDT bfe93133 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.187124] ACPI: Dynamic OEM Table Load: [ 0.187129] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.187427] ACPI: Interpreter enabled [ 0.187440] ACPI: (supports S0 S3 S4 S5) [ 0.187468] ACPI: Using IOAPIC for interrupt routing [ 0.227149] ACPI: No dock devices found. [ 0.227149] HEST: Table not found. [ 0.227149] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.241769] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.267158] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.267164] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.267169] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.267173] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.267178] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xf3ffffff] (ignored) [ 0.267182] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored) [ 0.267186] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored) [ 0.267191] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored) [ 0.267195] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored) [ 0.267199] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored) [ 0.267203] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored) [ 0.267207] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored) [ 0.267227] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.267304] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604 [ 0.267375] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.267381] pci 0000:00:01.0: PME# disabled [ 0.267452] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.267524] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] [ 0.267578] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.267651] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] [ 0.267725] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.267756] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.268056] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.268064] pci 0000:00:1a.7: PME# disabled [ 0.268103] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.268132] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] [ 0.268266] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.268273] pci 0000:00:1b.0: PME# disabled [ 0.268311] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.268450] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.268457] pci 0000:00:1c.0: PME# disabled [ 0.268498] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.268638] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.268645] pci 0000:00:1c.1: PME# disabled [ 0.268689] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 [ 0.268828] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.268835] pci 0000:00:1c.3: PME# disabled [ 0.268877] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.268948] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] [ 0.269004] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.269075] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] [ 0.269129] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.269200] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.269274] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.269306] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.269441] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.269449] pci 0000:00:1d.7: PME# disabled [ 0.269478] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.269601] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.269737] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.269746] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.269753] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.269762] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.269835] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.269858] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.269874] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.269890] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.269906] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.269921] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] [ 0.269983] pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101 [ 0.270010] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] [ 0.270026] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] [ 0.270042] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] [ 0.270057] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] [ 0.270073] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eef] [ 0.270089] pci 0000:00:1f.2: reg 24: [io 0xeff0-0xefff] [ 0.270147] pci 0000:00:1f.2: PME# supported from D3hot [ 0.270154] pci 0000:00:1f.2: PME# disabled [ 0.270175] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.270197] pci 0000:00:1f.3: reg 10: [mem 0xfebfbf00-0xfebfbfff] [ 0.270251] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] [ 0.270374] pci 0000:01:00.0: [10de:0407] type 0 class 0x000300 [ 0.270398] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.270425] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.270451] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.270469] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f] [ 0.270487] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] [ 0.276041] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.276047] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.276053] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] [ 0.276061] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.276140] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] [ 0.276341] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280 [ 0.276402] pci 0000:0c:00.0: reg 10: [mem 0xf9fff000-0xf9ffffff] [ 0.276855] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.276870] pci 0000:0c:00.0: PME# disabled [ 0.276946] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.276978] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] [ 0.276988] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.277074] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] [ 0.277081] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.277089] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] [ 0.277100] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.277159] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200 [ 0.277187] pci 0000:03:00.0: reg 10: [mem 0xf9bfe000-0xf9bfffff] [ 0.277305] pci 0000:03:00.0: supports D1 D2 [ 0.277309] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.277316] pci 0000:03:00.0: PME# disabled [ 0.277344] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00 [ 0.277365] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.277368] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller [ 0.277390] pci 0000:03:01.0: reg 10: [mem 0xf9bfd800-0xf9bfdfff] [ 0.277515] pci 0000:03:01.0: supports D1 D2 [ 0.277519] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.277526] pci 0000:03:01.0: PME# disabled [ 0.277554] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805 [ 0.277582] pci 0000:03:01.1: reg 10: [mem 0xf9bfd400-0xf9bfd4ff] [ 0.277708] pci 0000:03:01.1: supports D1 D2 [ 0.277712] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.277719] pci 0000:03:01.1: PME# disabled [ 0.277748] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880 [ 0.277776] pci 0000:03:01.2: reg 10: [mem 0xf9bfd600-0xf9bfd6ff] [ 0.277901] pci 0000:03:01.2: supports D1 D2 [ 0.277904] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.277912] pci 0000:03:01.2: PME# disabled [ 0.277940] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880 [ 0.277969] pci 0000:03:01.3: reg 10: [mem 0xf9bfd700-0xf9bfd7ff] [ 0.278096] pci 0000:03:01.3: supports D1 D2 [ 0.278099] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.278107] pci 0000:03:01.3: PME# disabled [ 0.278197] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.278209] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] [ 0.278220] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.278225] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.278265] pci_bus 0000:00: on NUMA node 0 [ 0.278275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.278718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.278876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.278944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.279026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.279111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.279195] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.279200] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.279203] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.293710] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 [ 0.293820] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.293924] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 0.294028] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 0.294133] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.294242] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.294355] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.294449] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.294643] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.294653] vgaarb: loaded [ 0.294656] vgaarb: bridge control possible 0000:01:00.0 [ 0.294847] i2c-core: driver [aat2870] using legacy suspend method [ 0.294850] i2c-core: driver [aat2870] using legacy resume method [ 0.294976] SCSI subsystem initialized [ 0.295066] libata version 3.00 loaded. [ 0.295139] usbcore: registered new interface driver usbfs [ 0.295160] usbcore: registered new interface driver hub [ 0.295203] usbcore: registered new device driver usb [ 0.295350] PCI: Using ACPI for IRQ routing [ 0.298403] PCI: pci_cache_line_size set to 64 bytes [ 0.298571] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.298576] reserve RAM buffer: 00000000bfe92400 - 00000000bfffffff [ 0.298733] NetLabel: Initializing [ 0.298737] NetLabel: domain hash size = 128 [ 0.298739] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.298755] NetLabel: unlabeled traffic allowed by default [ 0.298829] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.298840] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.298848] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.308099] Switching to clocksource hpet [ 0.321034] AppArmor: AppArmor Filesystem Enabled [ 0.321082] pnp: PnP ACPI init [ 0.321111] ACPI: bus type pnp registered [ 0.333951] pnp 00:00: [bus 00-ff] [ 0.333957] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.333961] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.333964] pnp 00:00: [io 0x0d00-0xffff window] [ 0.333968] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.333972] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.333976] pnp 00:00: [mem 0xc0000000-0xf3ffffff window] [ 0.333980] pnp 00:00: [mem 0xf8000000-0xfebfffff window] [ 0.333984] pnp 00:00: [mem 0xfec10000-0xfecfffff window] [ 0.333988] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] [ 0.333991] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] [ 0.333995] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] [ 0.333999] pnp 00:00: [mem 0xfee10000-0xff9fffff window] [ 0.334003] pnp 00:00: [mem 0xffb00000-0xffefffff window] [ 0.334128] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.334171] pnp 00:01: [irq 12] [ 0.334213] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.334238] pnp 00:02: [io 0x0060] [ 0.334241] pnp 00:02: [io 0x0064] [ 0.334244] pnp 00:02: [io 0x0062] [ 0.334251] pnp 00:02: [io 0x0066] [ 0.334259] pnp 00:02: [irq 1] [ 0.334301] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.334325] pnp 00:03: [io 0x0070-0x0071] [ 0.334333] pnp 00:03: [irq 8] [ 0.334336] pnp 00:03: [io 0x0072-0x0077] [ 0.334381] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.334408] pnp 00:04: [io 0x0061] [ 0.334411] pnp 00:04: [io 0x0063] [ 0.334414] pnp 00:04: [io 0x0065] [ 0.334417] pnp 00:04: [io 0x0067] [ 0.334461] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.334484] pnp 00:05: [io 0x0c80-0x0cff] [ 0.334573] system 00:05: [io 0x0c80-0x0cff] could not be reserved [ 0.334579] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.334607] pnp 00:06: [dma 4] [ 0.334611] pnp 00:06: [io 0x0000-0x000f] [ 0.334614] pnp 00:06: [io 0x0080-0x0085] [ 0.334617] pnp 00:06: [io 0x0087-0x008f] [ 0.334620] pnp 00:06: [io 0x00c0-0x00df] [ 0.334624] pnp 00:06: [io 0x0010-0x001f] [ 0.334627] pnp 00:06: [io 0x0090-0x0091] [ 0.334630] pnp 00:06: [io 0x0093-0x009f] [ 0.334682] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.334705] pnp 00:07: [io 0x00f0-0x00ff] [ 0.334714] pnp 00:07: [irq 13] [ 0.334761] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.334820] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.334904] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.334910] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.335134] pnp 00:09: [io 0x0900-0x097f] [ 0.335138] pnp 00:09: [io 0x0092] [ 0.335141] pnp 00:09: [io 0x00b2-0x00b3] [ 0.335144] pnp 00:09: [io 0x0020-0x0021] [ 0.335147] pnp 00:09: [io 0x00a0-0x00a1] [ 0.335151] pnp 00:09: [irq 0 disabled] [ 0.335154] pnp 00:09: [io 0x04d0-0x04d1] [ 0.335157] pnp 00:09: [io 0x1000-0x1005] [ 0.335161] pnp 00:09: [io 0x1008-0x100f] [ 0.335187] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.335192] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.335297] system 00:09: [io 0x0900-0x097f] has been reserved [ 0.335302] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.335307] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.335332] pnp 00:0a: [io 0xf400-0xf4fe] [ 0.335336] pnp 00:0a: [io 0x0086] [ 0.335339] pnp 00:0a: [io 0x1006-0x1007] [ 0.335342] pnp 00:0a: [io 0x100a-0x1059] [ 0.335345] pnp 00:0a: [io 0x1060-0x107f] [ 0.335348] pnp 00:0a: [io 0x1080-0x10bf] [ 0.335352] pnp 00:0a: [io 0x10c0-0x10df] [ 0.335355] pnp 00:0a: [io 0x1010-0x102f] [ 0.335358] pnp 00:0a: [io 0x0809] [ 0.335383] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.335389] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.335394] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.335399] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.335495] system 00:0a: [io 0xf400-0xf4fe] has been reserved [ 0.335500] system 00:0a: [io 0x1080-0x10bf] has been reserved [ 0.335504] system 00:0a: [io 0x10c0-0x10df] has been reserved [ 0.335509] system 00:0a: [io 0x0809] has been reserved [ 0.335514] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.349934] pnp 00:0b: [mem 0x00000000-0x0009efff] [ 0.349939] pnp 00:0b: [mem 0x0009f000-0x0009ffff] [ 0.349943] pnp 00:0b: [mem 0x000c0000-0x000cffff] [ 0.349947] pnp 00:0b: [mem 0x000e0000-0x000fffff] [ 0.349950] pnp 00:0b: [mem 0x00100000-0xbfe923ff] [ 0.349954] pnp 00:0b: [mem 0xbfe92400-0xbfefffff] [ 0.349957] pnp 00:0b: [mem 0xbff00000-0xbfffffff] [ 0.349961] pnp 00:0b: [mem 0xbff00000-0xc06fffff] [ 0.349965] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.349968] pnp 00:0b: [mem 0xffa00000-0xffafffff] [ 0.349972] pnp 00:0b: [mem 0xfec00000-0xfec0ffff] [ 0.349975] pnp 00:0b: [mem 0xfee00000-0xfee0ffff] [ 0.349978] pnp 00:0b: [mem 0xfed20000-0xfed8ffff] [ 0.349982] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff] [ 0.349985] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff] [ 0.349989] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff] [ 0.349993] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff] [ 0.349996] pnp 00:0b: [mem 0xfed18000-0xfed1bfff] [ 0.350000] pnp 00:0b: [mem 0xf4000000-0xf7ffffff] [ 0.350194] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved [ 0.350199] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.350204] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.350209] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.350214] system 00:0b: [mem 0x00100000-0xbfe923ff] could not be reserved [ 0.350218] system 00:0b: [mem 0xbfe92400-0xbfefffff] has been reserved [ 0.350223] system 00:0b: [mem 0xbff00000-0xbfffffff] has been reserved [ 0.350227] system 00:0b: [mem 0xbff00000-0xc06fffff] could not be reserved [ 0.350232] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.350237] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved [ 0.350241] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.350246] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.350251] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.350255] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.350260] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.350264] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.350272] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.350277] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.350281] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.350288] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.350381] pnp: PnP ACPI: found 12 devices [ 0.350385] ACPI: ACPI bus type pnp unregistered [ 0.350391] PnPBIOS: Disabled by ACPI PNP [ 0.387906] PCI: max bus depth: 1 pci_try_num: 2 [ 0.387986] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.387993] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.387998] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0200000-0xc03fffff] [ 0.388018] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.388024] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.388028] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.388033] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.388040] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] [ 0.388046] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.388053] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] [ 0.388058] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.388067] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff] [ 0.388075] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.388087] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] [ 0.388092] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.388101] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.388108] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.388119] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] [ 0.388124] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.388133] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] [ 0.388141] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.388152] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.388161] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] [ 0.388201] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.388208] pci 0000:00:01.0: setting latency timer to 64 [ 0.388218] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.388226] pci 0000:00:1c.0: setting latency timer to 64 [ 0.388242] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.388249] pci 0000:00:1c.1: setting latency timer to 64 [ 0.388265] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.388272] pci 0000:00:1c.3: setting latency timer to 64 [ 0.388284] pci 0000:00:1e.0: setting latency timer to 64 [ 0.388291] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.388295] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.388299] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.388303] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff] [ 0.388308] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.388312] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff] [ 0.388316] pci_bus 0000:0b: resource 1 [mem 0xc0200000-0xc03fffff] [ 0.388320] pci_bus 0000:0b: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.388324] pci_bus 0000:0c: resource 0 [io 0x2000-0x2fff] [ 0.388328] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 0.388332] pci_bus 0000:0c: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.388337] pci_bus 0000:0d: resource 0 [io 0xc000-0xcfff] [ 0.388340] pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff] [ 0.388344] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.388349] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff] [ 0.388352] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.388356] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] [ 0.388425] NET: Registered protocol family 2 [ 0.388535] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.388912] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.389450] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.389722] TCP: Hash tables configured (established 131072 bind 65536) [ 0.389726] TCP reno registered [ 0.389731] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.389744] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.389858] NET: Registered protocol family 1 [ 0.389908] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.389935] pci 0000:00:1a.0: PCI INT A disabled [ 0.389951] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.389976] pci 0000:00:1a.1: PCI INT B disabled [ 0.389997] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.390037] pci 0000:00:1a.7: PCI INT C disabled [ 0.390063] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.390088] pci 0000:00:1d.0: PCI INT A disabled [ 0.390100] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.390124] pci 0000:00:1d.1: PCI INT B disabled [ 0.390136] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.390161] pci 0000:00:1d.2: PCI INT C disabled [ 0.390175] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.390198] pci 0000:00:1d.7: PCI INT A disabled [ 0.390245] pci 0000:01:00.0: Boot video device [ 0.390275] PCI: CLS 64 bytes, default 64 [ 0.390284] Simple Boot Flag at 0x79 set to 0x1 [ 0.390841] audit: initializing netlink socket (disabled) [ 0.390855] type=2000 audit(1347208386.384:1): initialized [ 0.424384] highmem bounce pool size: 64 pages [ 0.424392] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.427569] VFS: Disk quotas dquot_6.5.2 [ 0.427669] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.428565] fuse init (API version 7.17) [ 0.428709] msgmni has been set to 1643 [ 0.429187] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.429226] io scheduler noop registered [ 0.429229] io scheduler deadline registered [ 0.429240] io scheduler cfq registered (default) [ 0.429437] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.429489] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.429575] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.429645] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.429753] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.429823] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.429928] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.429998] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.430146] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.430186] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.430299] intel_idle: MWAIT substates: 0x22220 [ 0.430302] intel_idle: does not run on family 6 model 15 [ 0.430398] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.430469] ACPI: AC Adapter [AC] (off-line) [ 0.430586] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.431052] ACPI: Lid Switch [LID] [ 0.431125] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.431132] ACPI: Power Button [PBTN] [ 0.431202] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.431207] ACPI: Sleep Button [SBTN] [ 0.440107] Monitor-Mwait will be used to enter C-1 state [ 0.440151] Monitor-Mwait will be used to enter C-2 state [ 0.448349] Monitor-Mwait will be used to enter C-3 state [ 0.448363] Marking TSC unstable due to TSC halts in idle [ 0.448382] ACPI: acpi_idle registered with cpuidle [ 0.455623] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.455628] ACPI: Thermal Zone [THM] (38 C) [ 0.455675] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.455692] ACPI: Battery Slot [BAT0] (battery present) [ 0.455773] ERST: Table is not found! [ 0.455776] GHES: HEST is not enabled! [ 0.455898] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.456117] isapnp: Scanning for PnP cards... [ 0.504087] ACPI: Battery Slot [BAT0] (battery present) [ 0.814909] isapnp: No Plug & Play device found [ 0.847076] Freeing initrd memory: 19272k freed [ 0.916714] Linux agpgart interface v0.103 [ 0.919571] brd: module loaded [ 0.920902] loop: module loaded [ 0.921135] ata_piix 0000:00:1f.1: version 2.13 [ 0.921153] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.921213] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.921738] scsi0 : ata_piix [ 0.921870] scsi1 : ata_piix [ 0.922359] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 0.922364] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 0.922393] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.922401] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.922431] ata2: port disabled--ignoring [ 1.076068] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.076555] scsi2 : ata_piix [ 1.076680] scsi3 : ata_piix [ 1.077146] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17 [ 1.077156] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17 [ 1.077768] Fixed MDIO Bus: probed [ 1.077801] tun: Universal TUN/TAP device driver, 1.6 [ 1.077804] tun: (C) 1999-2004 Max Krasnyansky [ 1.077890] PPP generic driver version 2.4.2 [ 1.078054] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.078077] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.078097] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.078102] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.078181] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.078219] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.082114] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.082136] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 1.096026] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.096241] hub 1-0:1.0: USB hub found [ 1.096248] hub 1-0:1.0: 4 ports detected [ 1.096365] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.096381] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.096387] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.096461] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.096498] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.100455] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.100477] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 1.100519] ata1.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462D, DE07, max UDMA/33 [ 1.116150] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.116342] hub 2-0:1.0: USB hub found [ 1.116348] hub 2-0:1.0: 6 ports detected [ 1.116474] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.116497] uhci_hcd: USB Universal Host Controller Interface driver [ 1.116523] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.116535] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.116540] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.116612] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.116645] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 1.116851] hub 3-0:1.0: USB hub found [ 1.116857] hub 3-0:1.0: 2 ports detected [ 1.116967] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.116978] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.116983] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.117053] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.117099] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 1.117304] hub 4-0:1.0: USB hub found [ 1.117310] hub 4-0:1.0: 2 ports detected [ 1.117422] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.117433] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.117438] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.117511] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.117543] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 1.117749] hub 5-0:1.0: USB hub found [ 1.117755] hub 5-0:1.0: 2 ports detected [ 1.117860] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.117873] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.117878] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.117960] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.117994] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 1.118195] hub 6-0:1.0: USB hub found [ 1.118202] hub 6-0:1.0: 2 ports detected [ 1.118315] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.118325] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.118331] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.118404] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.118436] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.118639] hub 7-0:1.0: USB hub found [ 1.118645] hub 7-0:1.0: 2 ports detected [ 1.118838] usbcore: registered new interface driver libusual [ 1.118918] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.121953] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.121961] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.122176] mousedev: PS/2 mouse device common for all mice [ 1.122462] rtc_cmos 00:03: RTC can wake from S4 [ 1.122646] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.122684] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.122793] device-mapper: uevent: version 1.0.3 [ 1.122914] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.122966] EISA: Probing bus 0 at eisa.0 [ 1.123029] EISA: Mainboard \G_FFFF detected. [ 1.123059] Cannot allocate resource for EISA slot 1 [ 1.123062] Cannot allocate resource for EISA slot 2 [ 1.123065] Cannot allocate resource for EISA slot 3 [ 1.123092] EISA: Detected 0 cards. [ 1.123107] cpufreq-nforce2: No nForce2 chipset. [ 1.123206] cpuidle: using governor ladder [ 1.123381] cpuidle: using governor menu [ 1.123385] EFI Variables Facility v0.08 2004-May-17 [ 1.123808] TCP cubic registered [ 1.123999] NET: Registered protocol family 10 [ 1.125013] NET: Registered protocol family 17 [ 1.125021] Registering the dns_resolver key type [ 1.125045] Using IPI No-Shortcut mode [ 1.125289] PM: Hibernation image not present or could not be loaded. [ 1.125309] registered taskstats version 1 [ 1.126039] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.132298] ata1.00: configured for UDMA/33 [ 1.133376] scsi 0:0:0:0: CD-ROM TSSTcorp CDRWDVD TSL462D DE07 PQ: 0 ANSI: 5 [ 1.134982] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.134986] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.135184] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.135367] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.137250] Magic number: 12:420:590 [ 1.137378] rtc_cmos 00:03: setting system clock to 2012-09-09 16:33:08 UTC (1347208388) [ 1.138365] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.138369] EDD information not available. [ 1.872182] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.872208] ata3.01: SATA link down (SStatus 0 SControl 300) [ 2.242696] ata3.00: ATA-7: TOSHIBA MK8034GSX, AH301D, max UDMA/100 [ 2.242704] ata3.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.256762] ata3.00: configured for UDMA/100 [ 2.257032] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK8034GS AH30 PQ: 0 ANSI: 5 [ 2.257252] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.257288] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.257330] sd 2:0:0:0: [sda] Write Protect is off [ 2.257334] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.257393] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.312303] sda: sda1 sda2 < sda5 > [ 2.313084] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.424245] ata4.01: failed to resume link (SControl 0) [ 2.424305] ata4.00: SATA link down (SStatus 0 SControl 300) [ 2.424335] ata4.01: SATA link down (SStatus 0 SControl 0) [ 2.424470] Freeing unused kernel memory: 712k freed [ 2.424842] Write protecting the kernel text: 5620k [ 2.424930] Write protecting the kernel read-only data: 2324k [ 2.451654] udevd[101]: starting version 175 [ 2.574445] acpi device:31: registered as cooling_device2 [ 2.575009] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4 [ 2.575617] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.575686] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 2.607340] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.610852] sdhci: Secure Digital Host Controller Interface driver [ 2.610857] sdhci: Copyright(c) Pierre Ossman [ 2.624070] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.624081] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.624090] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.664226] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 2.664274] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.664359] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0 [ 2.685232] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:1c:23:96:44:87 [ 2.728128] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 2.728228] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) [ 2.728261] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 2.729309] mmc0: no vmmc regulator found [ 2.730356] Registered led device: mmc0:: [ 2.732405] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA [ 2.838747] vesafb: mode is 1024x768x16, linelength=2048, pages=0 [ 2.838751] vesafb: scrolling: redraw [ 2.838756] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 2.841360] vesafb: framebuffer at 0xfb000000, mapped to 0xf8200000, using 1536k, total 1536k [ 2.841804] Console: switching to colour frame buffer device 128x48 [ 2.846224] fb0: VESA VGA frame buffer device [ 3.196768] kjournald starting. Commit interval 5 seconds [ 3.196909] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 3.228474] firewire_core: created device fw0: GUID 314fc00039485d81, S400 [ 42.040463] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.068128] udevd[363]: starting version 175 [ 42.194488] cfg80211: Calling CRDA to update world regulatory domain [ 42.222902] wmi: Mapper loaded [ 42.282708] Adding 3229028k swap on /dev/sda5. Priority:-1 extents:1 across:3229028k [ 42.303437] nvidia: module license 'NVIDIA' taints kernel. [ 42.303444] Disabling lock debugging due to kernel taint [ 42.309987] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 42.309995] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 42.310195] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 42.310212] iwl3945 0000:0c:00.0: setting latency timer to 64 [ 42.348569] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 42.348851] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 42.349020] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 42.352646] r592 0000:03:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 42.356567] r592: driver successfully loaded [ 42.364092] iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 42.364098] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 42.364260] iwl3945 0000:0c:00.0: irq 45 for MSI/MSI-X [ 42.364461] Registered led device: phy0-led [ 42.364506] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 42.377839] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 42.389727] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 42.393688] r852: driver loaded successfully [ 42.676512] EXT3-fs (sda1): using internal journal [ 42.712870] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 42.713091] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 42.918727] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 42.918742] nvidia 0000:01:00.0: setting latency timer to 64 [ 42.918750] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 42.919069] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012 [ 42.940987] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 43.200553] type=1400 audit(1347208430.559:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=696 comm="apparmor_parser" [ 43.201197] type=1400 audit(1347208430.559:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=696 comm="apparmor_parser" [ 43.201562] type=1400 audit(1347208430.559:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=696 comm="apparmor_parser" [ 43.372095] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0 [ 43.372105] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 43.383977] input: Dell WMI hotkeys as /devices/virtual/input/input7 [ 43.388742] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 43.388748] cfg80211: World regulatory domain updated: [ 43.388752] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 43.388756] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 43.388761] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 43.388765] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 43.388770] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 43.388774] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 43.407446] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 43.987077] init: failsafe main process (863) killed by TERM signal [ 44.121847] lp: driver loaded but no devices found [ 44.126211] Bluetooth: Core ver 2.16 [ 44.126281] NET: Registered protocol family 31 [ 44.126284] Bluetooth: HCI device and connection manager initialized [ 44.126289] Bluetooth: HCI socket layer initialized [ 44.126292] Bluetooth: L2CAP socket layer initialized [ 44.127084] Bluetooth: SCO socket layer initialized [ 44.145929] ppdev: user-space parallel port driver [ 44.156975] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 44.156980] Bluetooth: BNEP filters: protocol multicast [ 44.172107] Bluetooth: RFCOMM TTY layer initialized [ 44.172120] Bluetooth: RFCOMM socket layer initialized [ 44.172124] Bluetooth: RFCOMM ver 1.11 [ 44.210676] type=1400 audit(1347208431.567:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=963 comm="apparmor_parser" [ 44.211770] type=1400 audit(1347208431.567:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=963 comm="apparmor_parser" [ 44.256240] init: kdm main process (951) killed by TERM signal [ 44.262373] type=1400 audit(1347208431.619:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=985 comm="apparmor_parser" [ 44.262390] type=1400 audit(1347208431.619:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=984 comm="apparmor_parser" [ 44.272566] type=1400 audit(1347208431.631:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=986 comm="apparmor_parser" [ 44.273215] type=1400 audit(1347208431.631:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=986 comm="apparmor_parser" [ 44.273580] type=1400 audit(1347208431.631:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=986 comm="apparmor_parser" [ 44.647167] init: gdm main process (1048) killed by TERM signal [ 44.813198] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9 [ 44.884968] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.885321] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 45.032235] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.033022] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.303822] vboxdrv: Found 2 processor cores. [ 45.304486] vboxdrv: fAsync=0 offMin=0x201 offMax=0x863a [ 45.305490] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 45.305495] vboxdrv: Successfully loaded version 4.1.20 (interface 0x00190000). [ 45.523445] vboxpci: IOMMU not found (not registered) [ 45.528038] usb 6-1: new low-speed USB device number 2 using uhci_hcd [ 45.907062] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input9 [ 45.907547] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0 [ 45.907947] usbcore: registered new interface driver usbhid [ 45.907951] usbhid: USB HID core driver [ 50.723953] wlan0: authenticate with 00:16:b6:5c:35:13 (try 1) [ 50.725945] wlan0: authenticated [ 50.729508] wlan0: associate with 00:16:b6:5c:35:13 (try 1) [ 50.731866] wlan0: RX AssocResp from 00:16:b6:5c:35:13 (capab=0x411 status=0 aid=3) [ 50.731872] wlan0: associated [ 50.733518] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 53.824068] ata1: lost interrupt (Status 0x58) [ 53.828031] ata1: drained 65536 bytes to clear DRQ [ 53.942243] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 53.942250] sr 0:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00 [ 53.942268] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 53.942270] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 53.942275] ata1.00: status: { DRDY } [ 53.942319] ata1: soft resetting link [ 54.168383] ata1.00: configured for UDMA/33 [ 54.183967] ata1: EH complete [ 54.183994] sr 0:0:0:0: ioctl_internal_command return code = 8000002 [ 54.184000] : Sense Key : Aborted Command [current] [descriptor] [ 54.184033] : Add. Sense: No additional sense information [ 61.104025] wlan0: no IPv6 routers present [ 322.465446] CE: hpet increased min_delta_ns to 20113 nsec [96311.500177] ieee80211 phy0: wlan0: No probe response from AP 00:16:b6:5c:35:13 after 500ms, disconnecting. [96311.520454] cfg80211: All devices are disconnected, going to restore regulatory settings [96311.520468] cfg80211: Restoring regulatory settings [96311.520501] cfg80211: Calling CRDA to update world regulatory domain [96311.531252] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [96311.531260] cfg80211: World regulatory domain updated: [96311.531264] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [96311.531272] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [96311.531279] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [96311.531285] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [96311.531291] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [96311.531298] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [96313.962688] wlan0: authenticate with 00:16:b6:5c:35:13 (try 1) [96313.966719] wlan0: authenticated [96313.967009] wlan0: associate with 00:16:b6:5c:35:13 (try 1) [96313.969614] wlan0: RX ReassocResp from 00:16:b6:5c:35:13 (capab=0x411 status=0 aid=3) [96313.969622] wlan0: associated [98837.856156] wlan0: deauthenticated from 00:16:b6:5c:35:13 (Reason: 7) [98837.896506] cfg80211: All devices are disconnected, going to restore regulatory settings [98837.896518] cfg80211: Restoring regulatory settings [98837.896527] cfg80211: Calling CRDA to update world regulatory domain [98837.906925] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [98837.906933] cfg80211: World regulatory domain updated: [98837.906938] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [98837.906945] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [98837.906952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [98837.906959] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [98837.906965] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [98837.906971] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [98840.338875] wlan0: authenticate with 00:16:b6:5c:35:13 (try 1) [98840.340788] wlan0: authenticated [98840.341124] wlan0: associate with 00:16:b6:5c:35:13 (try 1) [98840.343691] wlan0: RX ReassocResp from 00:16:b6:5c:35:13 (capab=0x411 status=0 aid=3) [98840.343698] wlan0: associated [98883.788287] usb 2-2: new high-speed USB device number 3 using ehci_hcd [98883.976563] usbcore: registered new interface driver uas [98883.984520] Initializing USB Mass Storage driver... [98883.984705] scsi4 : usb-storage 2-2:1.1 [98883.984830] usbcore: registered new interface driver usb-storage [98883.984834] USB Mass Storage support registered. [98884.985702] scsi 4:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS [98884.987208] sd 4:0:0:0: Attached scsi generic sg2 type 0 [98884.990907] sd 4:0:0:0: [sdb] Attached SCSI removable disk [99874.811156] usb 2-2: USB disconnect, device number 3 [99887.752089] usb 2-2: new high-speed USB device number 4 using ehci_hcd [99887.896081] scsi5 : usb-storage 2-2:1.1 [99888.897098] scsi 5:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS [99888.898608] sd 5:0:0:0: Attached scsi generic sg2 type 0 [99888.902465] sd 5:0:0:0: [sdb] Attached SCSI removable disk [100147.256226] usb 2-2: USB disconnect, device number 4 [100195.284057] usb 2-2: new high-speed USB device number 5 using ehci_hcd [100195.430332] scsi6 : usb-storage 2-2:1.1 [100196.429028] scsi 6:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS [100196.439630] sd 6:0:0:0: [sdb] Attached SCSI removable disk [100196.447189] sd 6:0:0:0: Attached scsi generic sg2 type 0 [100423.869932] usb 2-2: USB disconnect, device number 5 [101277.440216] usb 2-2: new high-speed USB device number 6 using ehci_hcd [101277.582381] scsi7 : usb-storage 2-2:1.1 [101278.581707] scsi 7:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS [101278.583273] sd 7:0:0:0: Attached scsi generic sg2 type 0 [101278.589407] sd 7:0:0:0: [sdb] Attached SCSI removable disk [101583.347968] usb 2-2: USB disconnect, device number 6 [106741.564217] usb 2-2: new high-speed USB device number 7 using ehci_hcd [106741.708466] scsi8 : usb-storage 2-2:1.1 [106742.709654] scsi 8:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS [106742.711322] sd 8:0:0:0: Attached scsi generic sg2 type 0 [106742.714596] sd 8:0:0:0: [sdb] Attached SCSI removable disk [109172.632807] usb 2-2: USB disconnect, device number 7 [161526.233569] wlan0: deauthenticated from 00:16:b6:5c:35:13 (Reason: 7) [161526.276505] cfg80211: All devices are disconnected, going to restore regulatory settings [161526.276517] cfg80211: Restoring regulatory settings [161526.276526] cfg80211: Calling CRDA to update world regulatory domain [161526.377459] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [161526.377464] cfg80211: World regulatory domain updated: [161526.377468] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [161526.377472] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161526.377477] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [161526.377481] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [161526.377486] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161526.377490] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161528.715072] wlan0: authenticate with 00:16:b6:5c:35:13 (try 1) [161528.717046] wlan0: authenticated [161528.717383] wlan0: associate with 00:16:b6:5c:35:13 (try 1) [161528.719975] wlan0: RX ReassocResp from 00:16:b6:5c:35:13 (capab=0x411 status=0 aid=3) [161528.719983] wlan0: associated [189383.500177] ieee80211 phy0: wlan0: No probe response from AP 00:16:b6:5c:35:13 after 500ms, disconnecting. [189383.528314] cfg80211: All devices are disconnected, going to restore regulatory settings [189383.528329] cfg80211: Restoring regulatory settings [189383.528362] cfg80211: Calling CRDA to update world regulatory domain [189383.539037] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [189383.539045] cfg80211: World regulatory domain updated: [189383.539050] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [189383.539057] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189383.539064] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [189383.539070] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [189383.539076] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189383.539083] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189385.964095] wlan0: authenticate with 00:16:b6:5c:35:13 (try 1) [189385.966580] wlan0: authenticated [189385.966898] wlan0: associate with 00:16:b6:5c:35:13 (try 1) [189385.969436] wlan0: RX ReassocResp from 00:16:b6:5c:35:13 (capab=0x411 status=0 aid=1) [189385.969441] wlan0: associated [196543.504271] ieee80211 phy0: wlan0: No probe response from AP 00:16:b6:5c:35:13 after 500ms, disconnecting. [196543.528573] cfg80211: All devices are disconnected, going to restore regulatory settings [196543.528584] cfg80211: Restoring regulatory settings [196543.528592] cfg80211: Calling CRDA to update world regulatory domain [196543.538970] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [196543.538978] cfg80211: World regulatory domain updated: [196543.538983] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [196543.538990] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [196543.538997] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [196543.539003] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [196543.539010] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [196543.539016] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [196545.974879] wlan0: authenticate with 00:16:b6:5c:35:13 (try 1) [196545.976869] wlan0: authenticated [196545.977274] wlan0: associate with 00:16:b6:5c:35:13 (try 1) [196545.981303] wlan0: RX ReassocResp from 00:16:b6:5c:35:13 (capab=0x411 status=0 aid=1) [196545.981311] wlan0: associated [197912.492177] ieee80211 phy0: wlan0: No probe response from AP 00:16:b6:5c:35:13 after 500ms, disconnecting. [197912.528231] cfg80211: All devices are disconnected, going to restore regulatory settings [197912.528245] cfg80211: Restoring regulatory settings [197912.528275] cfg80211: Calling CRDA to update world regulatory domain [197912.538479] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [197912.538487] cfg80211: World regulatory domain updated: [197912.538492] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [197912.538499] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [197912.538506] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [197912.538512] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [197912.538519] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [197912.538525] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [197914.955097] wlan0: authenticate with 00:16:b6:5c:35:13 (try 1) [197914.957011] wlan0: authenticated [197914.957335] wlan0: associate with 00:16:b6:5c:35:13 (try 1) [197914.960142] wlan0: RX ReassocResp from 00:16:b6:5c:35:13 (capab=0x411 status=0 aid=1) [197914.960150] wlan0: associated [219047.492218] ieee80211 phy0: wlan0: No probe response from AP 00:16:b6:5c:35:13 after 500ms, disconnecting. [219047.516445] cfg80211: All devices are disconnected, going to restore regulatory settings [219047.516460] cfg80211: Restoring regulatory settings [219047.516493] cfg80211: Calling CRDA to update world regulatory domain [219047.526892] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [219047.526901] cfg80211: World regulatory domain updated: [219047.526906] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [219047.526913] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [219047.526920] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [219047.526926] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [219047.526933] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [219047.526939] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [219049.963049] wlan0: authenticate with 00:16:b6:5c:35:13 (try 1) [219049.965038] wlan0: authenticated [219049.965349] wlan0: associate with 00:16:b6:5c:35:13 (try 1) [219049.967907] wlan0: RX ReassocResp from 00:16:b6:5c:35:13 (capab=0x411 status=0 aid=1) [219049.967915] wlan0: associated [227246.504190] ieee80211 phy0: wlan0: No probe response from AP 00:16:b6:5c:35:13 after 500ms, disconnecting. [227246.547328] cfg80211: All devices are disconnected, going to restore regulatory settings [227246.547339] cfg80211: Restoring regulatory settings [227246.547348] cfg80211: Calling CRDA to update world regulatory domain [227246.557868] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [227246.557876] cfg80211: World regulatory domain updated: [227246.557881] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [227246.557888] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [227246.557894] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [227246.557901] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [227246.557907] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [227246.557914] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [227248.986746] wlan0: authenticate with 00:16:b6:5c:35:13 (try 1) [227248.988700] wlan0: authenticated [227248.989068] wlan0: associate with 00:16:b6:5c:35:13 (try 1) [227248.991685] wlan0: RX ReassocResp from 00:16:b6:5c:35:13 (capab=0x411 status=0 aid=1) [227248.991693] wlan0: associated [243970.766199] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [243970.766208] ata3.00: BMDMA stat 0x24 [243970.766216] ata3.00: failed command: READ DMA [243970.766229] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [243970.766232] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [243970.766240] ata3.00: status: { DRDY ERR } [243970.766245] ata3.00: error: { UNC } [243970.804553] ata3.00: configured for UDMA/100 [243970.804573] ata3: EH complete [243977.588695] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [243977.588703] ata3.00: BMDMA stat 0x24 [243977.588711] ata3.00: failed command: READ DMA [243977.588725] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [243977.588728] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [243977.588735] ata3.00: status: { DRDY ERR } [243977.588740] ata3.00: error: { UNC } [243977.612582] ata3.00: configured for UDMA/100 [243977.612601] ata3: EH complete [243984.366748] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [243984.366756] ata3.00: BMDMA stat 0x24 [243984.366764] ata3.00: failed command: READ DMA [243984.366778] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [243984.366781] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [243984.366788] ata3.00: status: { DRDY ERR } [243984.366794] ata3.00: error: { UNC } [243984.388518] ata3.00: configured for UDMA/100 [243984.388536] ata3: EH complete [243991.167020] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [243991.167026] ata3.00: BMDMA stat 0x24 [243991.167032] ata3.00: failed command: READ DMA [243991.167041] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [243991.167043] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [243991.167048] ata3.00: status: { DRDY ERR } [243991.167052] ata3.00: error: { UNC } [243991.188558] ata3.00: configured for UDMA/100 [243991.188576] ata3: EH complete [243997.956194] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [243997.956200] ata3.00: BMDMA stat 0x24 [243997.956206] ata3.00: failed command: READ DMA [243997.956215] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [243997.956217] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [243997.956222] ata3.00: status: { DRDY ERR } [243997.956225] ata3.00: error: { UNC } [243997.980499] ata3.00: configured for UDMA/100 [243997.980518] ata3: EH complete [244004.745357] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [244004.745366] ata3.00: BMDMA stat 0x24 [244004.745374] ata3.00: failed command: READ DMA [244004.745387] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [244004.745391] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [244004.745398] ata3.00: status: { DRDY ERR } [244004.745404] ata3.00: error: { UNC } [244004.768497] ata3.00: configured for UDMA/100 [244004.768522] sd 2:0:0:0: [sda] Unhandled sense code [244004.768527] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [244004.768536] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [244004.768547] Descriptor sense data with sense descriptors (in hex): [244004.768552] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [244004.768577] 06 f2 81 75 [244004.768588] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [244004.768601] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 06 f2 81 6f 00 00 08 00 [244004.768625] end_request: I/O error, dev sda, sector 116556149 [244004.768653] ata3: EH complete [244011.745650] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [244011.745659] ata3.00: BMDMA stat 0x24 [244011.745667] ata3.00: failed command: READ DMA [244011.745680] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [244011.745683] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [244011.745691] ata3.00: status: { DRDY ERR } [244011.745696] ata3.00: error: { UNC } [244011.768597] ata3.00: configured for UDMA/100 [244011.768617] ata3: EH complete [244018.523713] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [244018.523722] ata3.00: BMDMA stat 0x24 [244018.523730] ata3.00: failed command: READ DMA [244018.523743] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [244018.523746] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [244018.523754] ata3.00: status: { DRDY ERR } [244018.523759] ata3.00: error: { UNC } [244018.544612] ata3.00: configured for UDMA/100 [244018.544631] ata3: EH complete [244025.301760] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [244025.301769] ata3.00: BMDMA stat 0x24 [244025.301776] ata3.00: failed command: READ DMA [244025.301790] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [244025.301793] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [244025.301801] ata3.00: status: { DRDY ERR } [244025.301806] ata3.00: error: { UNC } [244025.324599] ata3.00: configured for UDMA/100 [244025.324619] ata3: EH complete [244032.102044] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [244032.102053] ata3.00: BMDMA stat 0x24 [244032.102060] ata3.00: failed command: READ DMA [244032.102074] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [244032.102077] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [244032.102085] ata3.00: status: { DRDY ERR } [244032.102091] ata3.00: error: { UNC } [244032.124627] ata3.00: configured for UDMA/100 [244032.124647] ata3: EH complete [244038.902320] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [244038.902329] ata3.00: BMDMA stat 0x24 [244038.902338] ata3.00: failed command: READ DMA [244038.902351] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [244038.902354] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [244038.902362] ata3.00: status: { DRDY ERR } [244038.902367] ata3.00: error: { UNC } [244038.924507] ata3.00: configured for UDMA/100 [244038.924529] ata3: EH complete [244045.702595] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [244045.702604] ata3.00: BMDMA stat 0x24 [244045.702612] ata3.00: failed command: READ DMA [244045.702626] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [244045.702628] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [244045.702636] ata3.00: status: { DRDY ERR } [244045.702642] ata3.00: error: { UNC } [244045.724659] ata3.00: configured for UDMA/100 [244045.724684] sd 2:0:0:0: [sda] Unhandled sense code [244045.724690] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [244045.724698] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [244045.724709] Descriptor sense data with sense descriptors (in hex): [244045.724714] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [244045.724740] 06 f2 81 75 [244045.724751] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [244045.724764] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 06 f2 81 6f 00 00 08 00 [244045.724787] end_request: I/O error, dev sda, sector 116556149 [244045.724819] ata3: EH complete [244260.372631] audit_printk_skb: 45 callbacks suppressed [244260.372636] type=1400 audit(1347452646.885:27): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=25587 comm="apparmor_parser" [244260.374730] type=1400 audit(1347452646.885:28): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//launchpad_integration" pid=25587 comm="apparmor_parser" [244260.375396] type=1400 audit(1347452646.885:29): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//sanitized_helper" pid=25587 comm="apparmor_parser" [244260.376811] type=1400 audit(1347452646.889:30): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=25587 comm="apparmor_parser" [244260.378265] type=1400 audit(1347452646.889:31): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//launchpad_integration" pid=25587 comm="apparmor_parser" [244260.378938] type=1400 audit(1347452646.889:32): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//sanitized_helper" pid=25587 comm="apparmor_parser" [244260.379936] type=1400 audit(1347452646.889:33): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=25587 comm="apparmor_parser" [244260.381010] type=1400 audit(1347452646.893:34): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=25587 comm="apparmor_parser" [247449.073215] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247449.073224] ata3.00: BMDMA stat 0x24 [247449.073232] ata3.00: failed command: READ DMA [247449.073245] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247449.073249] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247449.073256] ata3.00: status: { DRDY ERR } [247449.073262] ata3.00: error: { UNC } [247449.096499] ata3.00: configured for UDMA/100 [247449.096517] ata3: EH complete [247455.873487] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247455.873504] ata3.00: BMDMA stat 0x24 [247455.873512] ata3.00: failed command: READ DMA [247455.873525] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247455.873528] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247455.873536] ata3.00: status: { DRDY ERR } [247455.873542] ata3.00: error: { UNC } [247455.896698] ata3.00: configured for UDMA/100 [247455.896719] ata3: EH complete [247462.673780] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247462.673786] ata3.00: BMDMA stat 0x24 [247462.673792] ata3.00: failed command: READ DMA [247462.673801] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247462.673803] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247462.673808] ata3.00: status: { DRDY ERR } [247462.673812] ata3.00: error: { UNC } [247462.696553] ata3.00: configured for UDMA/100 [247462.696574] ata3: EH complete [247469.463104] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247469.463110] ata3.00: BMDMA stat 0x24 [247469.463116] ata3.00: failed command: READ DMA [247469.463125] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247469.463127] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247469.463132] ata3.00: status: { DRDY ERR } [247469.463135] ata3.00: error: { UNC } [247469.484532] ata3.00: configured for UDMA/100 [247469.484555] ata3: EH complete [247476.263222] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247476.263230] ata3.00: BMDMA stat 0x24 [247476.263238] ata3.00: failed command: READ DMA [247476.263252] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247476.263255] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247476.263263] ata3.00: status: { DRDY ERR } [247476.263268] ata3.00: error: { UNC } [247476.284476] ata3.00: configured for UDMA/100 [247476.284496] ata3: EH complete [247483.063489] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247483.063498] ata3.00: BMDMA stat 0x24 [247483.063506] ata3.00: failed command: READ DMA [247483.063519] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247483.063522] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247483.063530] ata3.00: status: { DRDY ERR } [247483.063535] ata3.00: error: { UNC } [247483.084904] ata3.00: configured for UDMA/100 [247483.084929] sd 2:0:0:0: [sda] Unhandled sense code [247483.084933] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [247483.084939] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [247483.084946] Descriptor sense data with sense descriptors (in hex): [247483.084950] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [247483.084967] 06 f2 81 75 [247483.084974] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [247483.084983] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 06 f2 81 6f 00 00 08 00 [247483.084999] end_request: I/O error, dev sda, sector 116556149 [247483.085024] ata3: EH complete [247501.464206] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247501.464213] ata3.00: BMDMA stat 0x24 [247501.464218] ata3.00: failed command: READ DMA [247501.464228] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247501.464230] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247501.464235] ata3.00: status: { DRDY ERR } [247501.464238] ata3.00: error: { UNC } [247501.488507] ata3.00: configured for UDMA/100 [247501.488529] ata3: EH complete [247508.264488] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247508.264497] ata3.00: BMDMA stat 0x24 [247508.264505] ata3.00: failed command: READ DMA [247508.264518] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247508.264521] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247508.264528] ata3.00: status: { DRDY ERR } [247508.264534] ata3.00: error: { UNC } [247508.288532] ata3.00: configured for UDMA/100 [247508.288557] ata3: EH complete [247515.053652] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247515.053661] ata3.00: BMDMA stat 0x24 [247515.053669] ata3.00: failed command: READ DMA [247515.053682] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247515.053685] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247515.053693] ata3.00: status: { DRDY ERR } [247515.053698] ata3.00: error: { UNC } [247515.076593] ata3.00: configured for UDMA/100 [247515.076613] ata3: EH complete [247521.842809] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247521.842816] ata3.00: BMDMA stat 0x24 [247521.842821] ata3.00: failed command: READ DMA [247521.842830] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247521.842832] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247521.842837] ata3.00: status: { DRDY ERR } [247521.842841] ata3.00: error: { UNC } [247521.864506] ata3.00: configured for UDMA/100 [247521.864531] ata3: EH complete [247528.643066] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247528.643073] ata3.00: BMDMA stat 0x24 [247528.643087] ata3.00: failed command: READ DMA [247528.643096] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247528.643098] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247528.643103] ata3.00: status: { DRDY ERR } [247528.643107] ata3.00: error: { UNC } [247528.664524] ata3.00: configured for UDMA/100 [247528.664548] ata3: EH complete [247535.421130] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247535.421137] ata3.00: BMDMA stat 0x24 [247535.421143] ata3.00: failed command: READ DMA [247535.421152] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247535.421154] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247535.421159] ata3.00: status: { DRDY ERR } [247535.421163] ata3.00: error: { UNC } [247535.444521] ata3.00: configured for UDMA/100 [247535.444550] sd 2:0:0:0: [sda] Unhandled sense code [247535.444556] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [247535.444565] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [247535.444575] Descriptor sense data with sense descriptors (in hex): [247535.444581] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [247535.444606] 06 f2 81 75 [247535.444617] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [247535.444630] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 06 f2 81 6f 00 00 08 00 [247535.444653] end_request: I/O error, dev sda, sector 116556149 [247535.444687] ata3: EH complete [247604.190589] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247604.190595] ata3.00: BMDMA stat 0x24 [247604.190601] ata3.00: failed command: READ DMA [247604.190610] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247604.190612] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247604.190617] ata3.00: status: { DRDY ERR } [247604.190621] ata3.00: error: { UNC } [247604.212535] ata3.00: configured for UDMA/100 [247604.212555] ata3: EH complete [247610.968664] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247610.968673] ata3.00: BMDMA stat 0x24 [247610.968681] ata3.00: failed command: READ DMA [247610.968695] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247610.968698] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247610.968705] ata3.00: status: { DRDY ERR } [247610.968710] ata3.00: error: { UNC } [247610.993630] ata3.00: configured for UDMA/100 [247610.993649] ata3: EH complete [247617.757797] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247617.757804] ata3.00: BMDMA stat 0x24 [247617.757809] ata3.00: failed command: READ DMA [247617.757819] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247617.757821] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247617.757826] ata3.00: status: { DRDY ERR } [247617.757829] ata3.00: error: { UNC } [247617.780498] ata3.00: configured for UDMA/100 [247617.780517] ata3: EH complete [247624.569183] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247624.569190] ata3.00: BMDMA stat 0x24 [247624.569195] ata3.00: failed command: READ DMA [247624.569204] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247624.569206] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247624.569211] ata3.00: status: { DRDY ERR } [247624.569215] ata3.00: error: { UNC } [247624.592656] ata3.00: configured for UDMA/100 [247624.592675] ata3: EH complete [247631.358325] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247631.358331] ata3.00: BMDMA stat 0x24 [247631.358337] ata3.00: failed command: READ DMA [247631.358345] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247631.358347] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247631.358353] ata3.00: status: { DRDY ERR } [247631.358356] ata3.00: error: { UNC } [247631.380454] ata3.00: configured for UDMA/100 [247631.380474] ata3: EH complete [247638.136377] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [247638.136383] ata3.00: BMDMA stat 0x24 [247638.136389] ata3.00: failed command: READ DMA [247638.136398] ata3.00: cmd c8/00:08:6f:81:f2/00:00:00:00:00/e6 tag 0 dma 4096 in [247638.136400] res 51/40:02:75:81:f2/00:00:00:00:00/e6 Emask 0x9 (media error) [247638.136405] ata3.00: status: { DRDY ERR } [247638.136409] ata3.00: error: { UNC } [247638.162013] ata3.00: configured for UDMA/100 [247638.162037] sd 2:0:0:0: [sda] Unhandled sense code [247638.162041] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [247638.162047] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [247638.162054] Descriptor sense data with sense descriptors (in hex): [247638.162058] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [247638.162075] 06 f2 81 75 [247638.162083] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [247638.162092] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 06 f2 81 6f 00 00 08 00 [247638.162108] end_request: I/O error, dev sda, sector 116556149 [247638.162132] ata3: EH complete [247749.484720] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [247749.504184] SGI XFS Quota Management subsystem [247749.512175] JFS: nTxBlock = 8192, nTxLock = 65536 [247749.591660] NTFS driver 2.1.30 [Flags: R/O MODULE]. [247749.830526] QNX4 filesystem 0.2.3 registered. [247749.929059] Btrfs loaded