[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-41-generic-pae (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #90-Ubuntu SMP Tue May 22 12:48:11 UTC 2012 (Ubuntu 2.6.32-41.90-generic-pae 2.6.32.59+drm33.24) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-D7FFF uncachable [ 0.000000] D8000-DBFFF write-protect [ 0.000000] DC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 00E0000000 mask FFF8000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000 [ 0.000000] RAMDISK: 3729f000 - 37fef4d1 [ 0.000000] Allocated new RAMDISK: 00947000 - 016974d1 [ 0.000000] Move RAMDISK from 000000003729f000 - 0000000037fef4d0 to 00947000 - 016974d0 [ 0.000000] ACPI: RSDP 000f6f00 00014 (v00 AWARD ) [ 0.000000] ACPI: RSDT 3fff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fff30c0 03ABB (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] ACPI: APIC 3fff6b80 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 133MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00012000 - 00018f40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000093e858] TEXT DATA BSS ==> [0000100000 - 000093e858] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [000093f000 - 000094606a] BRK ==> [000093f000 - 000094606a] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000947000 - 00016974d1] NEW RAMDISK ==> [0000947000 - 00016974d1] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f5520] f5520 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262014 [ 0.000000] free_area_init_node: node 0, pgdat c07df020, node_mem_map c1699200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 268 pages used for memmap [ 0.000000] HighMem zone: 34022 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c2000000 s39480 r0 d21960 u2097152 [ 0.000000] pcpu-alloc: s39480 r0 d21960 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259966 [ 0.000000] Kernel command line: root=/dev/mapper/rebeccas-root ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:0003fff0) [ 0.000000] Memory: 1011276k/1048512k available (4852k kernel code, 36328k reserved, 2226k data, 680k init, 137160k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07ea000 - 0xc0894000 ( 680 kB) [ 0.000000] .data : 0xc05bd1af - 0xc07e99c8 (2226 kB) [ 0.000000] .text : 0xc0100000 - 0xc05bd1af (4852 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1799.514 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.02 BogoMIPS (lpj=7198056) [ 0.004026] Security Framework initialized [ 0.004053] AppArmor: AppArmor initialized [ 0.004062] Mount-cache hash table entries: 512 [ 0.004205] Initializing cgroup subsys ns [ 0.004209] Initializing cgroup subsys cpuacct [ 0.004214] Initializing cgroup subsys memory [ 0.004224] Initializing cgroup subsys devices [ 0.004227] Initializing cgroup subsys freezer [ 0.004230] Initializing cgroup subsys net_cls [ 0.004252] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004255] CPU: L2 Cache: 128K (64 bytes/line) [ 0.004260] mce: CPU supports 5 MCE banks [ 0.004281] Performance Events: AMD PMU driver. [ 0.004286] ... version: 0 [ 0.004288] ... bit width: 48 [ 0.004290] ... generic registers: 4 [ 0.004293] ... value mask: 0000ffffffffffff [ 0.004295] ... max period: 00007fffffffffff [ 0.004297] ... fixed-purpose events: 0 [ 0.004300] ... event mask: 000000000000000f [ 0.004304] Checking 'hlt' instruction... OK. [ 0.020744] SMP alternatives: switching to UP code [ 0.028250] Freeing SMP alternatives: 20k freed [ 0.028282] ACPI: Core revision 20090903 [ 0.036012] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036020] ftrace: allocating 22471 entries in 44 pages [ 0.040118] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044249] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083936] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (3599.02 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] devtmpfs: initialized [ 0.084001] regulator: core version 0.5 [ 0.084001] Time: 13:31:00 Date: 06/22/12 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] EISA bus registered [ 0.084001] ACPI: bus type pci registered [ 0.116986] PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 [ 0.116989] PCI: Using configuration type 1 for base access [ 0.118062] bio: create slab at 0 [ 0.118542] ACPI: EC: Look up EC in DSDT [ 0.120269] ACPI Warning: Package List length (0x6) larger than NumElements count (0x2), truncated [ 0.120276] (20090903/dsobject-515) [ 0.123822] ACPI: Interpreter enabled [ 0.123829] ACPI: (supports S0 S1 S4 S5) [ 0.123857] ACPI: Using IOAPIC for interrupt routing [ 0.128126] ACPI: No dock devices found. [ 0.128238] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.128290] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.128426] pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] [ 0.128460] pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] [ 0.128466] pci 0000:00:02.7: reg 14 io port: [0xe100-0xe17f] [ 0.128500] pci 0000:00:02.7: supports D1 D2 [ 0.128503] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.128507] pci 0000:00:02.7: PME# disabled [ 0.128523] pci 0000:00:03.0: reg 10 32bit mmio: [0xe8184000-0xe8184fff] [ 0.128564] pci 0000:00:03.1: reg 10 32bit mmio: [0xe8187000-0xe8187fff] [ 0.128599] pci 0000:00:03.2: reg 10 32bit mmio: [0xe8188000-0xe8188fff] [ 0.128640] pci 0000:00:03.3: reg 10 32bit mmio: [0xe8182000-0xe8182fff] [ 0.128674] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.128678] pci 0000:00:03.3: PME# disabled [ 0.128704] pci 0000:00:04.0: reg 10 io port: [0xe200-0xe2ff] [ 0.128710] pci 0000:00:04.0: reg 14 32bit mmio: [0xe8183000-0xe8183fff] [ 0.128727] pci 0000:00:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.128746] pci 0000:00:04.0: supports D1 D2 [ 0.128749] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128753] pci 0000:00:04.0: PME# disabled [ 0.128775] pci 0000:00:05.0: reg 10 io port: [0xe300-0xe307] [ 0.128781] pci 0000:00:05.0: reg 14 io port: [0xe400-0xe403] [ 0.128786] pci 0000:00:05.0: reg 18 io port: [0xe500-0xe507] [ 0.128792] pci 0000:00:05.0: reg 1c io port: [0xe600-0xe603] [ 0.128797] pci 0000:00:05.0: reg 20 io port: [0xe700-0xe70f] [ 0.128821] pci 0000:00:05.0: PME# supported from D3cold [ 0.128824] pci 0000:00:05.0: PME# disabled [ 0.128851] pci 0000:00:09.0: reg 10 io port: [0xe800-0xe8ff] [ 0.128888] pci 0000:00:09.0: supports D1 D2 [ 0.128912] pci 0000:00:0a.0: reg 10 32bit mmio: [0xe8185000-0xe81853ff] [ 0.128947] pci 0000:00:0a.0: supports D1 D2 [ 0.128970] pci 0000:00:0b.0: reg 10 io port: [0xe900-0xe907] [ 0.128976] pci 0000:00:0b.0: reg 14 io port: [0xea00-0xea03] [ 0.128981] pci 0000:00:0b.0: reg 18 io port: [0xeb00-0xeb07] [ 0.128987] pci 0000:00:0b.0: reg 1c io port: [0xec00-0xec03] [ 0.128992] pci 0000:00:0b.0: reg 20 io port: [0xed00-0xed0f] [ 0.128998] pci 0000:00:0b.0: reg 24 32bit mmio: [0xe8186000-0xe81860ff] [ 0.129004] pci 0000:00:0b.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 0.129022] pci 0000:00:0b.0: supports D1 D2 [ 0.129048] pci 0000:00:0c.0: reg 10 32bit mmio: [0xe8180000-0xe8181fff] [ 0.129187] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.129193] pci 0000:01:00.0: reg 14 io port: [0xd000-0xd0ff] [ 0.129197] pci 0000:01:00.0: reg 18 32bit mmio: [0xe8020000-0xe802ffff] [ 0.129208] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.129226] pci 0000:01:00.0: supports D1 D2 [ 0.129244] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.129249] pci 0000:01:00.1: reg 14 32bit mmio: [0xe8030000-0xe803ffff] [ 0.129272] pci 0000:01:00.1: supports D1 D2 [ 0.129297] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.129301] pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe80fffff] [ 0.129305] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.129312] pci_bus 0000:00: on NUMA node 0 [ 0.129318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.158667] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.158771] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.158870] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.158975] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.159074] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.159176] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.159278] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.159380] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.159519] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.159522] vgaarb: loaded [ 0.159653] SCSI subsystem initialized [ 0.159741] libata version 3.00 loaded. [ 0.159828] usbcore: registered new interface driver usbfs [ 0.159842] usbcore: registered new interface driver hub [ 0.159868] usbcore: registered new device driver usb [ 0.160023] ACPI: WMI: Mapper loaded [ 0.160025] PCI: Using ACPI for IRQ routing [ 0.160219] NetLabel: Initializing [ 0.160221] NetLabel: domain hash size = 128 [ 0.160223] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.160238] NetLabel: unlabeled traffic allowed by default [ 0.160312] Switching to clocksource tsc [ 0.162338] AppArmor: AppArmor Filesystem Enabled [ 0.162372] pnp: PnP ACPI init [ 0.162396] ACPI: bus type pnp registered [ 0.164866] pnp: PnP ACPI: found 12 devices [ 0.164869] ACPI: ACPI bus type pnp unregistered [ 0.164874] PnPBIOS: Disabled by ACPI PNP [ 0.164889] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 0.164892] system 00:00: iomem range 0xda400-0xdbfff has been reserved [ 0.164896] system 00:00: iomem range 0xf0000-0xfbfff could not be reserved [ 0.164900] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.164903] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 0.164908] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.164912] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.164915] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.164919] system 00:00: iomem range 0xffee0000-0xffefffff has been reserved [ 0.164923] system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved [ 0.164927] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.164931] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.164939] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.164942] system 00:02: ioport range 0x800-0x805 has been reserved [ 0.164945] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.199660] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.199664] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.199669] pci 0000:00:01.0: MEM window: 0xe8000000-0xe80fffff [ 0.199674] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.199687] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.199690] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.199694] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.199697] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe80fffff] [ 0.199700] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.199744] NET: Registered protocol family 2 [ 0.199847] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.200269] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.201351] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.201906] TCP: Hash tables configured (established 131072 bind 65536) [ 0.201910] TCP reno registered [ 0.202027] NET: Registered protocol family 1 [ 0.202064] alloc irq_desc for 20 on node -1 [ 0.202067] alloc kstat_irqs on node -1 [ 0.202077] pci 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.227637] pci 0000:00:03.0: PCI INT A disabled [ 0.227644] alloc irq_desc for 21 on node -1 [ 0.227647] alloc kstat_irqs on node -1 [ 0.227651] pci 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.251626] pci 0000:00:03.1: PCI INT B disabled [ 0.251637] alloc irq_desc for 22 on node -1 [ 0.251639] alloc kstat_irqs on node -1 [ 0.251643] pci 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.275626] pci 0000:00:03.2: PCI INT C disabled [ 0.275635] alloc irq_desc for 23 on node -1 [ 0.275637] alloc kstat_irqs on node -1 [ 0.275641] pci 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.275659] pci 0000:00:03.3: PCI INT D disabled [ 0.275676] pci 0000:01:00.0: Boot video device [ 0.275879] cpufreq-nforce2: No nForce2 chipset. [ 0.275908] Scanning for low memory corruption every 60 seconds [ 0.276030] audit: initializing netlink socket (disabled) [ 0.276047] type=2000 audit(1340371859.275:1): initialized [ 0.287651] Trying to unpack rootfs image as initramfs... [ 0.300100] highmem bounce pool size: 64 pages [ 0.300109] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.305374] VFS: Disk quotas dquot_6.5.2 [ 0.305453] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.306110] fuse init (API version 7.13) [ 0.306216] msgmni has been set to 1708 [ 0.312066] alg: No test for stdrng (krng) [ 0.312183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.312186] io scheduler noop registered [ 0.312189] io scheduler anticipatory registered [ 0.312191] io scheduler deadline registered [ 0.312232] io scheduler cfq registered (default) [ 0.312363] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.312386] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.312488] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.312494] ACPI: Power Button [PWRB] [ 0.312542] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.312549] ACPI: Sleep Button [FUTS] [ 0.312604] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.312607] ACPI: Power Button [PWRF] [ 0.312649] fan PNP0C0B:00: registered as cooling_device0 [ 0.312654] ACPI: Fan [FAN] (on) [ 0.312888] processor LNXCPU:00: registered as cooling_device1 [ 0.315085] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.315095] ACPI: Thermal Zone [THRM] (29 C) [ 0.316584] isapnp: Scanning for PnP cards... [ 0.322319] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.322419] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.322752] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.323949] brd: module loaded [ 0.324488] loop: module loaded [ 0.324640] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.324823] pata_sis 0000:00:02.5: version 0.5.2 [ 0.328037] scsi0 : pata_sis [ 0.328198] scsi1 : pata_sis [ 0.329015] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14 [ 0.329019] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15 [ 0.329107] alloc irq_desc for 17 on node -1 [ 0.329110] alloc kstat_irqs on node -1 [ 0.329118] pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.329174] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.329503] Fixed MDIO Bus: probed [ 0.329540] PPP generic driver version 2.4.2 [ 0.329616] tun: Universal TUN/TAP device driver, 1.6 [ 0.329618] tun: (C) 1999-2004 Max Krasnyansky [ 0.329740] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.329764] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.329786] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.329820] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.329861] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported [ 0.329885] ehci_hcd 0000:00:03.3: irq 23, io mem 0xe8182000 [ 0.375370] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.375535] usb usb1: configuration #1 chosen from 1 choice [ 0.375567] hub 1-0:1.0: USB hub found [ 0.375580] hub 1-0:1.0: 8 ports detected [ 0.375658] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.375686] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.375709] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.375761] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.375790] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe8184000 [ 0.465379] usb usb2: configuration #1 chosen from 1 choice [ 0.465412] hub 2-0:1.0: USB hub found [ 0.465427] hub 2-0:1.0: 3 ports detected [ 0.465493] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.465515] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.465565] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.465596] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe8187000 [ 0.553708] usb usb3: configuration #1 chosen from 1 choice [ 0.553742] hub 3-0:1.0: USB hub found [ 0.553756] hub 3-0:1.0: 3 ports detected [ 0.553821] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.553845] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 0.553891] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 0.553922] ohci_hcd 0000:00:03.2: irq 22, io mem 0xe8188000 [ 0.561667] ata1.00: ATA-7: Maxtor 6L160P0, BAH41G10, max UDMA/133 [ 0.561673] ata1.00: 320173056 sectors, multi 16: LBA48 [ 0.577831] ata1.00: configured for UDMA/133 [ 0.645457] usb usb4: configuration #1 chosen from 1 choice [ 0.645493] hub 4-0:1.0: USB hub found [ 0.645508] hub 4-0:1.0: 2 ports detected [ 0.645574] uhci_hcd: USB Universal Host Controller Interface driver [ 0.645671] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.652071] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.652082] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.652268] mice: PS/2 mouse device common for all mice [ 0.652425] rtc_cmos 00:04: RTC can wake from S4 [ 0.652475] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.652501] rtc0: alarms up to one year, 242 bytes nvram [ 0.652627] device-mapper: uevent: version 1.0.3 [ 0.652787] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.652851] device-mapper: multipath: version 1.1.0 loaded [ 0.652855] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.652989] EISA: Probing bus 0 at eisa.0 [ 0.652997] Cannot allocate resource for EISA slot 1 [ 0.653007] Cannot allocate resource for EISA slot 4 [ 0.653024] EISA: Detected 0 cards. [ 0.655178] cpuidle: using governor ladder [ 0.655183] cpuidle: using governor menu [ 0.655687] TCP cubic registered [ 0.655877] NET: Registered protocol family 10 [ 0.656710] NET: Registered protocol family 17 [ 0.656756] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00) [ 0.656841] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 [ 0.656844] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 0.656898] Using IPI No-Shortcut mode [ 0.657011] PM: Resume from disk failed. [ 0.657026] registered taskstats version 1 [ 0.657273] Magic number: 0:509:534 [ 0.657293] bdi 1:12: hash matches [ 0.657367] rtc_cmos 00:04: setting system clock to 2012-06-22 13:31:00 UTC (1340371860) [ 0.657371] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.657373] EDD information not available. [ 0.671941] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.739401] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.948051] usb 1-1: configuration #1 chosen from 1 choice [ 0.999477] isapnp: No Plug & Play device found [ 0.999654] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L160P0 BAH4 PQ: 0 ANSI: 5 [ 0.999846] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.000067] sd 0:0:0:0: [sda] 320173056 512-byte logical blocks: (163 GB/152 GiB) [ 1.000118] sd 0:0:0:0: [sda] Write Protect is off [ 1.000121] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.000147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.000303] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 1.082692] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.089857] Freeing initrd memory: 13633k freed [ 1.148297] ata2.00: ATAPI: LG CD-RW CED-8080B, 1.05, max MWDMA2 [ 1.148333] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A104, max UDMA/33 [ 1.164275] ata2.00: configured for PIO4 [ 1.180244] ata2.01: configured for UDMA/33 [ 1.183191] scsi 1:0:0:0: CD-ROM LG CD-RW CED-8080B 1.05 PQ: 0 ANSI: 5 [ 1.186229] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 1.186233] Uniform CD-ROM driver Revision: 3.20 [ 1.186374] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.186442] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.191530] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4040B A104 PQ: 0 ANSI: 5 [ 1.204178] sr1: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.204307] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.204371] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 1.204432] Freeing unused kernel memory: 680k freed [ 1.205251] Write protecting the kernel text: 4856k [ 1.205313] Write protecting the kernel read-only data: 1884k [ 1.236484] udev: starting version 151 [ 1.548278] sata_sis 0000:00:05.0: version 1.0 [ 1.548299] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.548305] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode [ 1.552913] Floppy drive(s): fd0 is 1.44M [ 1.561704] sis900.c: v1.08.10 Apr. 2 2006 [ 1.561736] Linux agpgart interface v0.103 [ 1.565079] scsi2 : sata_sis [ 1.572295] FDC 0 is a post-1991 82077 [ 1.573728] scsi3 : sata_sis [ 1.573804] ata3: SATA max UDMA/133 cmd 0xe300 ctl 0xe400 bmdma 0xe700 irq 17 [ 1.573809] ata4: SATA max UDMA/133 cmd 0xe500 ctl 0xe600 bmdma 0xe708 irq 17 [ 1.573870] pata_sil680 0000:00:0b.0: version 0.4.9 [ 1.573885] pata_sil680 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.573900] sil680: 133MHz clock. [ 1.578219] scsi4 : pata_sil680 [ 1.578901] scsi5 : pata_sil680 [ 1.578969] ata5: PATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xed00 irq 17 [ 1.578972] ata6: PATA max UDMA/133 cmd 0xeb00 ctl 0xec00 bmdma 0xed08 irq 17 [ 1.579048] alloc irq_desc for 19 on node -1 [ 1.579051] alloc kstat_irqs on node -1 [ 1.579059] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.580214] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 1.589481] 0000:00:04.0: Using transceiver found at address 1 as default [ 1.591356] eth0: SiS 900 PCI Fast Ethernet at 0xe200, IRQ 19, 00:14:2a:7d:9c:35 [ 1.591394] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0755] [ 1.596557] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 1.674283] [drm] Initialized drm 1.1.0 20060810 [ 1.753942] ata5.00: ATA-7: Maxtor 6L160P0, BAH41G10, max UDMA/133 [ 1.753947] ata5.00: 320173056 sectors, multi 16: LBA48 [ 1.769792] ata5.00: configured for UDMA/133 [ 1.910610] ata3: SATA link down (SStatus 0 SControl 300) [ 2.238574] ata4: SATA link down (SStatus 0 SControl 300) [ 2.238746] scsi 4:0:0:0: Direct-Access ATA Maxtor 6L160P0 BAH4 PQ: 0 ANSI: 5 [ 2.238939] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 2.239382] sd 4:0:0:0: [sdb] 320173056 512-byte logical blocks: (163 GB/152 GiB) [ 2.239432] sd 4:0:0:0: [sdb] Write Protect is off [ 2.239435] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.239461] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.239637] sdb: sdb1 sdb2 < sdb5 > [ 2.273396] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2.460277] [drm] radeon defaulting to kernel modesetting. [ 2.460282] [drm] radeon kernel modesetting enabled. [ 2.460356] alloc irq_desc for 16 on node -1 [ 2.460359] alloc kstat_irqs on node -1 [ 2.460368] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.463207] [drm] radeon: Initializing kernel modesetting. [ 2.463293] [drm] register mmio base: 0xE8020000 [ 2.463296] [drm] register mmio size: 65536 [ 2.463614] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 2.463627] [drm] Generation 2 PCI interface, using max accessible memory [ 2.463637] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 2.463653] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 2.464667] radeon 0000:01:00.0: putting AGP V3 device into 8x mode [ 2.464674] [drm] radeon: VRAM 128M [ 2.464676] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 2.464678] [drm] radeon: GTT 128M [ 2.464680] [drm] radeon: GTT from 0xE0000000 to 0xE7FFFFFF [ 2.464715] [drm] radeon: irq initialized. [ 2.464793] [drm] Detected VRAM RAM=128M, BAR=128M [ 2.464798] [drm] RAM width 64bits DDR [ 2.464903] [TTM] Zone kernel: Available graphics memory: 444454 kiB. [ 2.464906] [TTM] Zone highmem: Available graphics memory: 513034 kiB. [ 2.464926] [drm] radeon: 128M of VRAM memory ready [ 2.464929] [drm] radeon: 128M of GTT memory ready. [ 2.465166] [drm] radeon: cp idle (0x02000603) [ 2.465214] [drm] Loading R200 Microcode [ 2.465557] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 2.472767] [drm] radeon: ring at 0x00000000E0000000 [ 2.472789] [drm] ring test succeeded in 1 usecs [ 2.475352] [drm] radeon: ib pool ready. [ 2.475431] [drm] ib test succeeded in 0 usecs [ 2.476670] [drm] Default TV standard: PAL [ 2.476674] [drm] 27.000000000 MHz TV ref clk [ 2.476678] [drm] DFP table revision: 4 [ 2.476941] [drm] Default TV standard: PAL [ 2.476943] [drm] 27.000000000 MHz TV ref clk [ 2.477001] [drm] Radeon Display Connectors [ 2.477003] [drm] Connector 0: [ 2.477005] [drm] VGA [ 2.477009] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 2.477011] [drm] Encoders: [ 2.477013] [drm] CRT1: INTERNAL_DAC1 [ 2.477015] [drm] Connector 1: [ 2.477016] [drm] DVI-I [ 2.477018] [drm] HPD1 [ 2.477021] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 2.477023] [drm] Encoders: [ 2.477025] [drm] CRT2: INTERNAL_DAC2 [ 2.477026] [drm] DFP1: INTERNAL_TMDS1 [ 2.477028] [drm] Connector 2: [ 2.477030] [drm] S-video [ 2.477032] [drm] Encoders: [ 2.477033] [drm] TV1: INTERNAL_DAC2 [ 2.633972] [drm] fb mappable at 0xD0040000 [ 2.633976] [drm] vram apper at 0xD0000000 [ 2.633978] [drm] size 5242880 [ 2.633980] [drm] fb depth is 24 [ 2.633982] [drm] pitch is 5120 [ 2.645282] fb0: radeondrmfb frame buffer device [ 2.645286] registered panic notifier [ 2.645295] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 2.648984] vga16fb: initializing [ 2.648992] vga16fb: mapped to 0xc00a0000 [ 2.648999] vga16fb: not registering due to another framebuffer present [ 2.738177] Console: switching to colour frame buffer device 160x64 [ 3.500039] kjournald starting. Commit interval 5 seconds [ 3.500058] EXT3-fs: mounted filesystem with ordered data mode. [ 3.871730] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3.871735] ata5.00: BMDMA stat 0x4 [ 3.871740] ata5.00: failed command: READ DMA [ 3.871747] ata5.00: cmd c8/00:88:96:1c:52/00:00:00:00:00/eb tag 0 dma 69632 in [ 3.871749] res 51/84:88:96:1c:52/00:00:00:00:00/eb Emask 0x10 (ATA bus error) [ 3.871752] ata5.00: status: { DRDY ERR } [ 3.871755] ata5.00: error: { ICRC ABRT } [ 3.871781] ata5: soft resetting link [ 4.049743] ata5.00: configured for UDMA/133 [ 4.049757] ata5: EH complete [ 4.055087] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.055090] ata5.00: BMDMA stat 0x4 [ 4.055093] ata5.00: failed command: READ DMA [ 4.055100] ata5.00: cmd c8/00:88:96:1c:52/00:00:00:00:00/eb tag 0 dma 69632 in [ 4.055102] res 51/84:88:96:1c:52/00:00:00:00:00/eb Emask 0x10 (ATA bus error) [ 4.055105] ata5.00: status: { DRDY ERR } [ 4.055108] ata5.00: error: { ICRC ABRT } [ 4.055132] ata5: soft resetting link [ 4.233770] ata5.00: configured for UDMA/133 [ 4.233783] ata5: EH complete [ 4.238500] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.238503] ata5.00: BMDMA stat 0x4 [ 4.238506] ata5.00: failed command: READ DMA [ 4.238513] ata5.00: cmd c8/00:88:96:1c:52/00:00:00:00:00/eb tag 0 dma 69632 in [ 4.238515] res 51/84:88:96:1c:52/00:00:00:00:00/eb Emask 0x10 (ATA bus error) [ 4.238518] ata5.00: status: { DRDY ERR } [ 4.238521] ata5.00: error: { ICRC ABRT } [ 4.238542] ata5: soft resetting link [ 4.417750] ata5.00: configured for UDMA/133 [ 4.417762] ata5: EH complete [ 4.421938] ata5.00: limiting speed to UDMA/100:PIO4 [ 4.421942] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.421944] ata5.00: BMDMA stat 0x4 [ 4.421948] ata5.00: failed command: READ DMA [ 4.421954] ata5.00: cmd c8/00:88:96:1c:52/00:00:00:00:00/eb tag 0 dma 69632 in [ 4.421956] res 51/84:88:96:1c:52/00:00:00:00:00/eb Emask 0x10 (ATA bus error) [ 4.421959] ata5.00: status: { DRDY ERR } [ 4.421962] ata5.00: error: { ICRC ABRT } [ 4.421984] ata5: soft resetting link [ 4.601765] ata5.00: configured for UDMA/100 [ 4.601780] ata5: EH complete [ 23.722988] Adding 765944k swap on /dev/mapper/rebeccas-swap_1. Priority:-1 extents:1 across:765944k [ 23.800912] udev: starting version 151 [ 24.098999] lp: driver loaded but no devices found [ 24.101938] udev: renamed network interface eth0 to eth1 [ 24.168337] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.176318] parport_pc 00:09: reported by Plug and Play ACPI [ 24.176393] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 24.265015] lp0: using parport0 (interrupt-driven). [ 24.424339] Linux video capture interface: v2.00 [ 24.473576] EXT3 FS on dm-0, internal journal [ 24.488766] psmouse serio1: ID: 10 00 64 [ 24.553833] logips2pp: Detected unknown logitech mouse model 62 [ 24.619056] type=1505 audit(1340371884.458:2): operation="profile_load" pid=625 name="/sbin/dhclient3" [ 24.619396] type=1505 audit(1340371884.458:3): operation="profile_load" pid=625 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 24.619591] type=1505 audit(1340371884.458:4): operation="profile_load" pid=625 name="/usr/lib/connman/scripts/dhclient-script" [ 24.710793] type=1505 audit(1340371884.550:5): operation="profile_replace" pid=645 name="/sbin/dhclient3" [ 24.711171] type=1505 audit(1340371884.550:6): operation="profile_replace" pid=645 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 24.711380] type=1505 audit(1340371884.550:7): operation="profile_replace" pid=645 name="/usr/lib/connman/scripts/dhclient-script" [ 24.751487] cfg80211: Calling CRDA to update world regulatory domain [ 24.816334] ppdev: user-space parallel port driver [ 24.838199] cfg80211: World regulatory domain updated: [ 24.838206] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.838210] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.838214] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.838217] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.838220] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.838223] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.970058] saa7130/34: v4l2 driver version 0.2.15 loaded [ 24.970120] alloc irq_desc for 18 on node -1 [ 24.970123] alloc kstat_irqs on node -1 [ 24.970131] saa7134 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 24.970138] saa7134[0]: found at 0000:00:0a.0, rev: 1, irq: 18, latency: 32, mmio: 0xe8185000 [ 24.970145] saa7134[0]: subsystem: 153b:1158, board: Terratec Cinergy 600 TV MK3 [card=48,autodetected] [ 24.970192] saa7134[0]: board init: gpio is 50000 [ 24.970978] input: saa7134 IR (Terratec Cinergy 60 as /devices/pci0000:00/0000:00:0a.0/input/input5 [ 24.971476] IRQ 18/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 25.127177] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 25.136665] kjournald starting. Commit interval 5 seconds [ 25.166070] EXT3 FS on sdb1, internal journal [ 25.166080] EXT3-fs: mounted filesystem with ordered data mode. [ 25.269145] saa7134[0]: i2c eeprom 00: 3b 15 58 11 ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269157] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269167] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269176] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269185] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269194] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269203] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269212] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269221] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269247] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269317] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269326] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269335] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269344] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269353] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269374] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.269386] i2c i2c-2: Invalid 7-bit address 0x7a [ 25.512336] tuner 2-0043: chip found @ 0x86 (saa7134[0]) [ 25.581497] tda9887 2-0043: creating new instance [ 25.581503] tda9887 2-0043: tda988[5/6/7] found [ 25.622145] type=1505 audit(1340371885.462:8): operation="profile_replace" pid=786 name="/sbin/dhclient3" [ 25.622530] type=1505 audit(1340371885.462:9): operation="profile_replace" pid=786 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 25.622744] type=1505 audit(1340371885.462:10): operation="profile_replace" pid=786 name="/usr/lib/connman/scripts/dhclient-script" [ 25.714713] type=1505 audit(1340371885.554:11): operation="profile_load" pid=635 name="/usr/sbin/ntpd" [ 25.716046] All bytes are equal. It is not a TEA5767 [ 25.716174] tuner 2-0060: chip found @ 0xc0 (saa7134[0]) [ 25.796102] tuner-simple 2-0060: creating new instance [ 25.796107] tuner-simple 2-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 25.896134] saa6588 2-0010: saa6588 found @ 0x20 (saa7134[0]) [ 25.904054] saa7134[0]: found RDS decoder [ 25.912191] saa7134[0]: registered device video0 [v4l2] [ 25.912222] saa7134[0]: registered device vbi0 [ 25.912249] saa7134[0]: registered device radio0 [ 25.913809] rt2500pci 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.973323] saa7134 ALSA driver for DMA sound loaded [ 25.973342] IRQ 18/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 25.973368] saa7134[0]/alsa: saa7134[0] at 0xe8185000 irq 18 registered as card -2 [ 26.116453] phy0: Selected rate control algorithm 'minstrel' [ 26.117276] Registered led device: rt2500pci-phy0::radio [ 26.117296] Registered led device: rt2500pci-phy0::quality [ 26.117946] C-Media PCI 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 26.123634] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 26.177081] udev: renamed network interface wlan0 to wlan1 [ 26.467369] intel8x0_measure_ac97_clock: measured 61228 usecs (2945 samples) [ 26.467373] intel8x0: clocking to 48000 [ 28.195013] eth1: Media Link Off [ 28.195321] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 28.213048] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 30.739373] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 30.739377] apm: overridden by ACPI. [ 30.993748] __ratelimit: 63 callbacks suppressed [ 30.993753] type=1505 audit(1340371890.834:33): operation="profile_replace" pid=1149 name="/usr/sbin/mysqld" [ 31.830975] type=1502 audit(1340371891.670:34): operation="open" pid=1247 parent=1245 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/named.conf" [ 31.831112] type=1502 audit(1340371891.670:35): operation="open" pid=1247 parent=1245 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/named.conf.options" [ 31.867614] type=1502 audit(1340371891.706:36): operation="open" pid=1247 parent=1245 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/named.conf.local" [ 31.867968] type=1502 audit(1340371891.706:37): operation="open" pid=1247 parent=1245 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=105 ouid=0 name="/var/lib/named/etc/bind/named.conf.default-zones" [ 31.868444] type=1502 audit(1340371891.710:38): operation="open" pid=1247 parent=1245 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=105 ouid=0 name="/var/lib/named/etc/bind/bind.keys" [ 31.900861] type=1502 audit(1340371891.742:39): operation="mknod" pid=1247 parent=1245 profile="/usr/sbin/named" requested_mask="c::" denied_mask="c::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/named.pid" [ 31.900928] type=1502 audit(1340371891.742:40): operation="open" pid=1247 parent=1245 profile="/usr/sbin/named" requested_mask="wc::" denied_mask="wc::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/named.pid" [ 31.905660] type=1502 audit(1340371891.746:41): operation="mknod" pid=1247 parent=1245 profile="/usr/sbin/named" requested_mask="c::" denied_mask="c::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/session.key" [ 31.905712] type=1502 audit(1340371891.746:42): operation="open" pid=1247 parent=1245 profile="/usr/sbin/named" requested_mask="wc::" denied_mask="wc::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/session.key" [ 47.840229] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load [ 47.872130] Marking TSC unstable due to cpufreq changes [ 47.872202] Switching to clocksource acpi_pm [ 63.636705] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 72.287142] __ratelimit: 24 callbacks suppressed [ 72.287147] type=1502 audit(1340371932.126:51): operation="unlink" pid=1247 parent=1 profile="/usr/sbin/named" requested_mask="d::" denied_mask="d::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/session.key" [ 72.298684] type=1502 audit(1340371932.138:52): operation="unlink" pid=1246 parent=1 profile="/usr/sbin/named" requested_mask="d::" denied_mask="d::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/named.pid" [ 73.344557] type=1502 audit(1340371933.186:53): operation="open" pid=2673 parent=2671 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/named.conf" [ 73.344680] type=1502 audit(1340371933.186:54): operation="open" pid=2673 parent=2671 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/named.conf.options" [ 73.344893] type=1502 audit(1340371933.186:55): operation="open" pid=2673 parent=2671 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/named.conf.local" [ 73.344975] type=1502 audit(1340371933.186:56): operation="open" pid=2673 parent=2671 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=105 ouid=0 name="/var/lib/named/etc/bind/named.conf.default-zones" [ 73.345804] type=1502 audit(1340371933.186:57): operation="open" pid=2673 parent=2671 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=105 ouid=0 name="/var/lib/named/etc/bind/bind.keys" [ 73.356112] type=1502 audit(1340371933.198:58): operation="mknod" pid=2673 parent=2671 profile="/usr/sbin/named" requested_mask="c::" denied_mask="c::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/named.pid" [ 73.356183] type=1502 audit(1340371933.198:59): operation="open" pid=2673 parent=2671 profile="/usr/sbin/named" requested_mask="wc::" denied_mask="wc::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/named.pid" [ 73.356866] type=1502 audit(1340371933.198:60): operation="mknod" pid=2673 parent=2671 profile="/usr/sbin/named" requested_mask="c::" denied_mask="c::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/session.key" [ 233.108189] wlan1: direct probe to AP 7c:4f:b5:48:13:c7 (try 1) [ 233.108228] wlan1: deauthenticating from 7c:4f:b5:48:13:c7 by local choice (reason=3) [ 233.108258] wlan1: direct probe to AP 7c:4f:b5:48:13:c7 (try 1) [ 233.114406] wlan1: direct probe responded [ 233.114416] wlan1: authenticate with AP 7c:4f:b5:48:13:c7 (try 1) [ 233.121125] wlan1: authenticated [ 233.128045] wlan1: associate with AP 7c:4f:b5:48:13:c7 (try 1) [ 233.138396] wlan1: RX AssocResp from 7c:4f:b5:48:13:c7 (capab=0x411 status=0 aid=1) [ 233.138402] wlan1: associated [ 233.139522] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 233.141067] cfg80211: Calling CRDA for country: DE [ 233.146393] cfg80211: Received country IE: [ 233.146402] cfg80211: Regulatory domain: DE [ 233.146406] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 233.146412] (2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 233.146416] cfg80211: CRDA thinks this should applied: [ 233.146420] cfg80211: Regulatory domain: DE [ 233.146423] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 233.146429] (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 233.146434] (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 233.146439] (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 233.146443] cfg80211: We intersect both of these and get: [ 233.146446] cfg80211: Regulatory domain: 98 [ 233.146449] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 233.146455] (2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 233.146465] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 233.146473] cfg80211: Current regulatory domain updated by AP to: DE [ 233.146477] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 233.146482] (2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 233.225966] padlock: VIA PadLock not detected. [ 233.348026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 233.912023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 234.460023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 234.696024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 234.912036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 235.120022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 235.372040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 235.720022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 235.824021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 236.528025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 236.720022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 236.984051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 238.020023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 238.688024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 238.912023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 239.148044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 240.716020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 242.912021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 243.732014] wlan1: no IPv6 routers present [ 244.136026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 245.561282] __ratelimit: 27 callbacks suppressed [ 245.561286] type=1502 audit(1340372105.402:70): operation="open" pid=2673 parent=1 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/named.conf" [ 245.561371] type=1502 audit(1340372105.402:71): operation="open" pid=2673 parent=1 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/named.conf.options" [ 245.561494] type=1502 audit(1340372105.402:72): operation="open" pid=2673 parent=1 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/named.conf.local" [ 245.561540] type=1502 audit(1340372105.402:73): operation="open" pid=2673 parent=1 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=105 ouid=0 name="/var/lib/named/etc/bind/named.conf.default-zones" [ 245.561825] type=1502 audit(1340372105.402:74): operation="open" pid=2673 parent=1 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=105 ouid=0 name="/var/lib/named/etc/bind/bind.keys" [ 245.567124] type=1502 audit(1340372105.406:75): operation="unlink" pid=2673 parent=1 profile="/usr/sbin/named" requested_mask="d::" denied_mask="d::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/named.pid" [ 245.567243] type=1502 audit(1340372105.406:76): operation="mknod" pid=2673 parent=1 profile="/usr/sbin/named" requested_mask="c::" denied_mask="c::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/named.pid" [ 245.567273] type=1502 audit(1340372105.406:77): operation="open" pid=2673 parent=1 profile="/usr/sbin/named" requested_mask="wc::" denied_mask="wc::" fsuid=105 ouid=105 name="/var/lib/named/var/run/named/named.pid" [ 245.567513] type=1502 audit(1340372105.406:78): operation="open" pid=2673 parent=1 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/db.root" [ 245.581550] type=1502 audit(1340372105.422:79): operation="open" pid=2673 parent=1 profile="/usr/sbin/named" requested_mask="r::" denied_mask="r::" fsuid=105 ouid=105 name="/var/lib/named/etc/bind/rndc.key" [ 246.232051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 246.420020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 248.864024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 250.868020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 251.080031] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 251.236023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 252.486454] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 253.692023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 254.144028] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 255.132027] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 255.352024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 255.884025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 256.044025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 256.272030] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 258.888016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 260.888024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 262.892025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 264.892024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 266.896025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 268.900058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 276.876020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 287.000037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 293.412022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 293.596028] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 298.192054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 299.588028] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 299.792025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 300.920026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 301.037116] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 301.228040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 301.656018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 301.840071] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 302.012068] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 302.256043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 309.432044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 320.380058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 321.044052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 321.809130] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 322.016076] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 322.222233] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 322.525218] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 333.412021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 333.596025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 335.704028] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 349.796060] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 359.360064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 359.596037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 359.804041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 360.008047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 361.152046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 382.664042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 385.133110] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 391.137095] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 393.488052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 393.672046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 401.572025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 413.752036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 424.184035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 425.012016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 426.976035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 432.868022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 433.120025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 433.324065] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 433.548052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 473.384048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 474.068047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 474.488026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 474.692026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 475.108057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 475.308026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 475.512040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 475.716023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 475.988022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 476.228022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 476.436044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 476.640022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 476.844024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 477.052050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 477.888054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 478.076030] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 478.280027] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 478.492033] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 479.368037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 492.476175] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 493.072058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 493.354943] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 500.840053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 501.116027] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 501.938700] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 522.592025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 526.852046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 528.632031] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 528.964054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 529.124026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 530.496040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 530.816022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 531.012059] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 531.508021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 539.396064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 550.300067] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 561.184037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 573.416046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 573.600043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 579.044021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 579.436065] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 581.936044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 584.044048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 596.468053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 614.184028] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 616.268043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 631.581109] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 643.044019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 645.184037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 648.044039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 651.112036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 651.824027] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 653.960027] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 655.620034] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 658.232047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 664.640021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 666.776063] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 666.976034] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 667.184049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 667.392031] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 669.824071] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 673.692036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 674.208025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 674.868041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 675.064018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 682.668023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 693.412050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 693.596083] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 706.044090] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 714.944039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 718.732049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 721.716032] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 723.188046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 723.392036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).