| 2011-09-04 12:55:24 |
dino99 |
bug |
|
|
added bug |
| 2011-09-04 12:56:28 |
dino99 |
description |
Oneiric i386 b1
I'm having devices temperature higher by 10°C since i use kernel 3.0.0.10. I first check hddtemp, then psensor to confirm hdd temp, and discovered that fan min/max settings are unrealistic: max lowest is 200 & max highest is 90000 !!!
The fan blowing on my hdds have settings set to: 188/143/195 (actual/min/max) , while an other fan have: 79000/40000/90000 rpm !!! (power2 fan sppeed) : that simply impossible.
Psensor identify it atk0110-acpi-0 (asus p5wdh ich7r card), so i then use digitools and get:
oem@oem-desktop:~$ sudo digifan -h
IT8705 not found!
Ident values are FFFF.
Should be 8705
oem@oem-desktop:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.21 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.31 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +4.99 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.36 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 0 RPM (min = 0 RPM)
BOX1 FAN Speed: 0 RPM (min = 800 RPM)
HDD FAN Speed: 181 RPM (min = 800 RPM)
POWER1 FAN Speed: 20454 RPM (min = 800 RPM)
POWER2 FAN Speed: 0 RPM (min = 800 RPM)
CPU Temperature: +17.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +43.0°C (high = +45.0°C, crit = +95.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +41.0°C (high = +74.0°C, crit = +100.0°C)
Core 1: +41.0°C (high = +74.0°C, crit = +100.0°C)
Core 2: +42.0°C (high = +74.0°C, crit = +100.0°C)
Core 3: +42.0°C (high = +74.0°C, crit = +100.0°C)
w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.21 V (min = +0.00 V, max = +1.74 V)
in1: +1.87 V (min = +0.30 V, max = +0.87 V) ALARM
AVCC: +3.31 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.31 V (min = +2.98 V, max = +3.63 V)
in4: +1.69 V (min = +1.42 V, max = +0.15 V) ALARM
in5: +1.56 V (min = +0.27 V, max = +1.46 V) ALARM
in6: +1.64 V (min = +0.90 V, max = +0.06 V) ALARM
3VSB: +3.31 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.26 V (min = +2.70 V, max = +3.30 V)
fan1: 0 RPM (min = 47 RPM, div = 128) ALARM
fan2: 0 RPM (min = 133 RPM, div = 128) ALARM
fan3: 0 RPM (min = 95 RPM, div = 128) ALARM
fan4: 0 RPM (min = 675000 RPM, div = 2) ALARM
fan5: 171 RPM (min = 602 RPM, div = 64) ALARM
temp1: +43.0°C (high = +70.0°C, hyst = +41.0°C) sensor = thermistor
temp2: +17.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
temp3: +124.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +2.500 V
I've reported against digitools but i'm not sure about which package to blame, maybe asus_atk0110 kernel's module
Really need to change these min/max/alarm levels.
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: digitools 1.03-1
ProcVersionSignature: Ubuntu 3.0.0-10.16-generic-pae 3.0.4
Uname: Linux 3.0.0-10-generic-pae i686
NonfreeKernelModules: nvidia
Architecture: i386
Date: Sun Sep 4 14:20:08 2011
ProcEnviron:
PATH=(custom, no user)
LANG=fr_FR.UTF-8
SHELL=/bin/bash
SourcePackage: digitools
UpgradeStatus: No upgrade log present (probably fresh install) |
Oneiric i386 b1
I'm having devices temperature higher by 10°C since i use kernel 3.0.0.10 (generic-pae). I first check hddtemp, then psensor to confirm hdd temp, and discovered that fan min/max settings are unrealistic: max lowest is 200 & max highest is 90000 !!!
The fan blowing on my hdds have settings set to: 188/143/195 (actual/min/max) , while an other fan have: 79000/40000/90000 rpm !!! (power2 fan sppeed) : that simply impossible.
Psensor identify it atk0110-acpi-0 (asus p5wdh ich7r card), so i then use digitools and get:
oem@oem-desktop:~$ sudo digifan -h
IT8705 not found!
Ident values are FFFF.
Should be 8705
oem@oem-desktop:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.21 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.31 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +4.99 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.36 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 0 RPM (min = 0 RPM)
BOX1 FAN Speed: 0 RPM (min = 800 RPM)
HDD FAN Speed: 181 RPM (min = 800 RPM)
POWER1 FAN Speed: 20454 RPM (min = 800 RPM)
POWER2 FAN Speed: 0 RPM (min = 800 RPM)
CPU Temperature: +17.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +43.0°C (high = +45.0°C, crit = +95.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +41.0°C (high = +74.0°C, crit = +100.0°C)
Core 1: +41.0°C (high = +74.0°C, crit = +100.0°C)
Core 2: +42.0°C (high = +74.0°C, crit = +100.0°C)
Core 3: +42.0°C (high = +74.0°C, crit = +100.0°C)
w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.21 V (min = +0.00 V, max = +1.74 V)
in1: +1.87 V (min = +0.30 V, max = +0.87 V) ALARM
AVCC: +3.31 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.31 V (min = +2.98 V, max = +3.63 V)
in4: +1.69 V (min = +1.42 V, max = +0.15 V) ALARM
in5: +1.56 V (min = +0.27 V, max = +1.46 V) ALARM
in6: +1.64 V (min = +0.90 V, max = +0.06 V) ALARM
3VSB: +3.31 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.26 V (min = +2.70 V, max = +3.30 V)
fan1: 0 RPM (min = 47 RPM, div = 128) ALARM
fan2: 0 RPM (min = 133 RPM, div = 128) ALARM
fan3: 0 RPM (min = 95 RPM, div = 128) ALARM
fan4: 0 RPM (min = 675000 RPM, div = 2) ALARM
fan5: 171 RPM (min = 602 RPM, div = 64) ALARM
temp1: +43.0°C (high = +70.0°C, hyst = +41.0°C) sensor = thermistor
temp2: +17.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
temp3: +124.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +2.500 V
I've reported against digitools but i'm not sure about which package to blame, maybe asus_atk0110 kernel's module
Really need to change these min/max/alarm levels.
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: digitools 1.03-1
ProcVersionSignature: Ubuntu 3.0.0-10.16-generic-pae 3.0.4
Uname: Linux 3.0.0-10-generic-pae i686
NonfreeKernelModules: nvidia
Architecture: i386
Date: Sun Sep 4 14:20:08 2011
ProcEnviron:
PATH=(custom, no user)
LANG=fr_FR.UTF-8
SHELL=/bin/bash
SourcePackage: digitools
UpgradeStatus: No upgrade log present (probably fresh install) |
|
| 2011-09-04 13:11:13 |
dino99 |
attachment added |
|
lspci.txt https://bugs.launchpad.net/ubuntu/+source/digitools/+bug/840981/+attachment/2352711/+files/lspci.txt |
|
| 2011-09-04 13:50:11 |
dino99 |
description |
Oneiric i386 b1
I'm having devices temperature higher by 10°C since i use kernel 3.0.0.10 (generic-pae). I first check hddtemp, then psensor to confirm hdd temp, and discovered that fan min/max settings are unrealistic: max lowest is 200 & max highest is 90000 !!!
The fan blowing on my hdds have settings set to: 188/143/195 (actual/min/max) , while an other fan have: 79000/40000/90000 rpm !!! (power2 fan sppeed) : that simply impossible.
Psensor identify it atk0110-acpi-0 (asus p5wdh ich7r card), so i then use digitools and get:
oem@oem-desktop:~$ sudo digifan -h
IT8705 not found!
Ident values are FFFF.
Should be 8705
oem@oem-desktop:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.21 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.31 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +4.99 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.36 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 0 RPM (min = 0 RPM)
BOX1 FAN Speed: 0 RPM (min = 800 RPM)
HDD FAN Speed: 181 RPM (min = 800 RPM)
POWER1 FAN Speed: 20454 RPM (min = 800 RPM)
POWER2 FAN Speed: 0 RPM (min = 800 RPM)
CPU Temperature: +17.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +43.0°C (high = +45.0°C, crit = +95.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +41.0°C (high = +74.0°C, crit = +100.0°C)
Core 1: +41.0°C (high = +74.0°C, crit = +100.0°C)
Core 2: +42.0°C (high = +74.0°C, crit = +100.0°C)
Core 3: +42.0°C (high = +74.0°C, crit = +100.0°C)
w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.21 V (min = +0.00 V, max = +1.74 V)
in1: +1.87 V (min = +0.30 V, max = +0.87 V) ALARM
AVCC: +3.31 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.31 V (min = +2.98 V, max = +3.63 V)
in4: +1.69 V (min = +1.42 V, max = +0.15 V) ALARM
in5: +1.56 V (min = +0.27 V, max = +1.46 V) ALARM
in6: +1.64 V (min = +0.90 V, max = +0.06 V) ALARM
3VSB: +3.31 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.26 V (min = +2.70 V, max = +3.30 V)
fan1: 0 RPM (min = 47 RPM, div = 128) ALARM
fan2: 0 RPM (min = 133 RPM, div = 128) ALARM
fan3: 0 RPM (min = 95 RPM, div = 128) ALARM
fan4: 0 RPM (min = 675000 RPM, div = 2) ALARM
fan5: 171 RPM (min = 602 RPM, div = 64) ALARM
temp1: +43.0°C (high = +70.0°C, hyst = +41.0°C) sensor = thermistor
temp2: +17.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
temp3: +124.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +2.500 V
I've reported against digitools but i'm not sure about which package to blame, maybe asus_atk0110 kernel's module
Really need to change these min/max/alarm levels.
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: digitools 1.03-1
ProcVersionSignature: Ubuntu 3.0.0-10.16-generic-pae 3.0.4
Uname: Linux 3.0.0-10-generic-pae i686
NonfreeKernelModules: nvidia
Architecture: i386
Date: Sun Sep 4 14:20:08 2011
ProcEnviron:
PATH=(custom, no user)
LANG=fr_FR.UTF-8
SHELL=/bin/bash
SourcePackage: digitools
UpgradeStatus: No upgrade log present (probably fresh install) |
Oneiric i386 b1
I'm having devices temperature higher by 10°C since i use kernel 3.0.0.10 (generic-pae). I first check hddtemp, then psensor to confirm hdd temp, and discovered that fan min/max settings are unrealistic: max lowest is 200 & max highest is 90000 !!!
The fan blowing on my hdds have settings set to: 188/143/195 (actual/min/max) , while an other fan have: 79000/40000/90000 rpm !!! (power2 fan sppeed) : that simply impossible.
Psensor identify it atk0110-acpi-0 (asus p5wdh ich7r card), so i then use digitools and get:
oem@oem-desktop:~$ sudo digifan -h
IT8705 not found!
Ident values are FFFF.
Should be 8705
oem@oem-desktop:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.21 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.31 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +4.99 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.36 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 0 RPM (min = 0 RPM)
BOX1 FAN Speed: 0 RPM (min = 800 RPM)
HDD FAN Speed: 181 RPM (min = 800 RPM)
POWER1 FAN Speed: 20454 RPM (min = 800 RPM)
POWER2 FAN Speed: 0 RPM (min = 800 RPM)
CPU Temperature: +17.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +43.0°C (high = +45.0°C, crit = +95.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +41.0°C (high = +74.0°C, crit = +100.0°C)
Core 1: +41.0°C (high = +74.0°C, crit = +100.0°C)
Core 2: +42.0°C (high = +74.0°C, crit = +100.0°C)
Core 3: +42.0°C (high = +74.0°C, crit = +100.0°C)
w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.21 V (min = +0.00 V, max = +1.74 V)
in1: +1.87 V (min = +0.30 V, max = +0.87 V) ALARM
AVCC: +3.31 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.31 V (min = +2.98 V, max = +3.63 V)
in4: +1.69 V (min = +1.42 V, max = +0.15 V) ALARM
in5: +1.56 V (min = +0.27 V, max = +1.46 V) ALARM
in6: +1.64 V (min = +0.90 V, max = +0.06 V) ALARM
3VSB: +3.31 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.26 V (min = +2.70 V, max = +3.30 V)
fan1: 0 RPM (min = 47 RPM, div = 128) ALARM
fan2: 0 RPM (min = 133 RPM, div = 128) ALARM
fan3: 0 RPM (min = 95 RPM, div = 128) ALARM
fan4: 0 RPM (min = 675000 RPM, div = 2) ALARM
fan5: 171 RPM (min = 602 RPM, div = 64) ALARM
temp1: +43.0°C (high = +70.0°C, hyst = +41.0°C) sensor = thermistor
temp2: +17.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
temp3: +124.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +2.500 V
I've reported against digitools but i'm not sure about which package to blame, maybe asus_atk0110 kernel's module or fancontrol
Really need to change these min/max/alarm levels.
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: digitools 1.03-1
ProcVersionSignature: Ubuntu 3.0.0-10.16-generic-pae 3.0.4
Uname: Linux 3.0.0-10-generic-pae i686
NonfreeKernelModules: nvidia
Architecture: i386
Date: Sun Sep 4 14:20:08 2011
ProcEnviron:
PATH=(custom, no user)
LANG=fr_FR.UTF-8
SHELL=/bin/bash
SourcePackage: digitools
UpgradeStatus: No upgrade log present (probably fresh install) |
|
| 2011-11-03 23:34:31 |
Jean-Philippe Orsini |
bug |
|
|
added subscriber jf |
| 2014-05-30 17:47:06 |
dino99 |
digitools (Ubuntu): status |
New |
Invalid |
|
| 2014-12-17 04:35:12 |
kris |
bug |
|
|
added subscriber kris |
