[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-10-generic (buildd@yellow) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #46-Ubuntu SMP Tue Jun 28 15:07:17 UTC 2011 (Ubuntu 2.6.38-10.46-generic 2.6.38.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-generic root=UUID=8438f823-1e0a-41bd-8cfd-2caea9695f94 ro quiet splash vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000d7e63800 (usable) [ 0.000000] BIOS-e820: 00000000d7e63800 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Dell Inc. Inspiron 1721 /0RT951, BIOS A07 04/21/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] [Firmware Warn]: MTRR: CPU 0: SYSCFG[MtrrFixDramModEn] not cleared by BIOS, clearing this bit [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 base 0100000000 mask FF00000000 write-back [ 0.000000] 4 base 00D8000000 mask FFF8000000 uncachable [ 0.000000] 5 base 00D7F00000 mask FFFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d7f00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xd7e63 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000d7e63000 [ 0.000000] 0000000000 - 00d7e00000 page 2M [ 0.000000] 00d7e00000 - 00d7e63000 page 4k [ 0.000000] kernel direct mapping tables up to d7e63000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ d7e5d000-d7e63000 [ 0.000000] RAMDISK: 366ce000 - 3735f000 [ 0.000000] ACPI: RSDP 00000000000fbc40 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000d7e65200 0005C (v01 DELL M08 27D80415 ASL 00000061) [ 0.000000] ACPI: FACP 00000000d7e6509c 000F4 (v04 DELL M08 27D80415 ASL 00000061) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557) [ 0.000000] ACPI: DSDT 00000000d7e65800 04ABB (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000d7e74000 00040 [ 0.000000] ACPI: HPET 00000000d7e65300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 00000000d7e65400 00068 (v01 DELL M08 27D80415 ASL 00000047) [ 0.000000] ACPI: MCFG 00000000d7e653c0 0003E (v16 DELL M08 27D80415 ASL 00000061) [ 0.000000] ACPI: SSDT 00000000d7e74400 001C4 (v01 DELL M08 20000BED ASL 00000061) [ 0.000000] ACPI: SLIC 00000000d7e6549c 00176 (v01 DELL M08 27D80415 ASL 00000061) [ 0.000000] ACPI: BOOT 00000000d7e64fc0 00028 (v01 DELL M08 27D80415 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011c000000-ffff88011f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000d7e63 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1015282 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 865947 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000d7e63000 - 00000000d7e64000 [ 0.000000] PM: Registered nosave memory: 00000000d7e64000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800d7c00000 s84416 r8192 d22080 u1048576 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999148 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-generic root=UUID=8438f823-1e0a-41bd-8cfd-2caea9695f94 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 7e28000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ cc000000 [ 0.000000] PM: Registered nosave memory: 00000000cc000000 - 00000000d0000000 [ 0.000000] Memory: 3845660k/4718592k available (5941k kernel code, 657464k absent, 215468k reserved, 5016k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 40632320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1795.107 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.020007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.21 BogoMIPS (lpj=17951070) [ 0.020013] pid_max: default: 32768 minimum: 301 [ 0.020049] Security Framework initialized [ 0.020070] AppArmor: AppArmor initialized [ 0.020072] Yama: becoming mindful. [ 0.020691] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024107] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.025744] Mount-cache hash table entries: 256 [ 0.025980] Initializing cgroup subsys ns [ 0.025985] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.025989] Initializing cgroup subsys cpuacct [ 0.025995] Initializing cgroup subsys memory [ 0.026006] Initializing cgroup subsys devices [ 0.026010] Initializing cgroup subsys freezer [ 0.026013] Initializing cgroup subsys net_cls [ 0.026016] Initializing cgroup subsys blkio [ 0.026069] tseg: 00d7f00000 [ 0.026072] CPU: Physical Processor ID: 0 [ 0.026074] CPU: Processor Core ID: 0 [ 0.026077] mce: CPU supports 5 MCE banks [ 0.026091] using C1E aware idle routine [ 0.028046] ACPI: Core revision 20110112 [ 0.040025] ftrace: allocating 24323 entries in 96 pages [ 0.050129] Setting APIC routing to flat [ 0.050506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.151735] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 01 [ 0.160000] Performance Events: AMD PMU driver. [ 0.160000] ... version: 0 [ 0.160000] ... bit width: 48 [ 0.160000] ... generic registers: 4 [ 0.160000] ... value mask: 0000ffffffffffff [ 0.160000] ... max period: 00007fffffffffff [ 0.160000] ... fixed-purpose events: 0 [ 0.160000] ... event mask: 000000000000000f [ 0.160000] [Firmware Warn]: MTRR: CPU 0: SYSCFG[MtrrFixDramModEn] not cleared by BIOS, clearing this bit [ 0.160000] Booting Node 0, Processors #1 Ok. [ 0.030000] System has AMD C1E enabled [ 0.030000] Switch to broadcast mode on CPU1 [ 0.310124] Brought up 2 CPUs [ 0.310127] Total of 2 processors activated (7181.25 BogoMIPS). [ 0.310346] [Firmware Warn]: MTRR: CPU 1: SYSCFG[MtrrFixDramModEn] not cleared by BIOS, clearing this bit [ 0.311031] Switch to broadcast mode on CPU0 [ 0.311031] devtmpfs: initialized [ 0.311385] print_constraints: dummy: [ 0.311420] Time: 12:36:13 Date: 07/26/11 [ 0.311471] NET: Registered protocol family 16 [ 0.311635] TOM: 00000000e0000000 aka 3584M [ 0.311640] TOM2: 0000000120000000 aka 4608M [ 0.311663] ACPI: bus type pci registered [ 0.311516] Trying to unpack rootfs image as initramfs... [ 0.311762] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.311766] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.317917] PCI: Using configuration type 1 for base access [ 0.317925] dmi type 0xB1 record - unknown flag [ 0.330067] bio: create slab at 0 [ 0.331061] ACPI: EC: Look up EC in DSDT [ 0.333808] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.337679] ACPI: Interpreter enabled [ 0.337683] ACPI: (supports S0 S3 S4 S5) [ 0.337707] ACPI: Using IOAPIC for interrupt routing [ 0.470218] ACPI: No dock devices found. [ 0.470222] HEST: Table not found. [ 0.470227] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.484194] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.512596] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.512600] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.512603] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.512606] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.512609] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff] [ 0.512613] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] [ 0.512616] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] [ 0.512619] pci_root PNP0A03:00: host bridge window [mem 0xfed00400-0xfedfffff] [ 0.512622] pci_root PNP0A03:00: host bridge window [mem 0xfee10400-0xffeffbff] [ 0.512625] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] [ 0.512643] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 [ 0.512677] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 [ 0.512721] pci 0000:00:05.0: [1002:7915] type 1 class 0x000604 [ 0.512750] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.512754] pci 0000:00:05.0: PME# disabled [ 0.512776] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604 [ 0.512805] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.512808] pci 0000:00:07.0: PME# disabled [ 0.512850] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.512871] pci 0000:00:12.0: reg 10: [io 0x6eb0-0x6eb7] [ 0.512883] pci 0000:00:12.0: reg 14: [io 0x6eb8-0x6ebb] [ 0.512894] pci 0000:00:12.0: reg 18: [io 0x6ec0-0x6ec7] [ 0.512906] pci 0000:00:12.0: reg 1c: [io 0x6ec8-0x6ecb] [ 0.512918] pci 0000:00:12.0: reg 20: [io 0x6ee0-0x6eef] [ 0.512930] pci 0000:00:12.0: reg 24: [mem 0xfec01000-0xfec013ff] [ 0.512954] pci 0000:00:12.0: set SATA to AHCI mode [ 0.512988] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.513004] pci 0000:00:13.0: reg 10: [mem 0xffb00000-0xffb00fff] [ 0.513079] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.513095] pci 0000:00:13.1: reg 10: [mem 0xffb01000-0xffb01fff] [ 0.513169] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.513185] pci 0000:00:13.2: reg 10: [mem 0xffb02000-0xffb02fff] [ 0.513260] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.513276] pci 0000:00:13.3: reg 10: [mem 0xffb03000-0xffb03fff] [ 0.513350] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.513366] pci 0000:00:13.4: reg 10: [mem 0xffb04000-0xffb04fff] [ 0.513447] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.513470] pci 0000:00:13.5: reg 10: [mem 0xffa80000-0xffa800ff] [ 0.513549] pci 0000:00:13.5: supports D1 D2 [ 0.513552] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.513557] pci 0000:00:13.5: PME# disabled [ 0.513584] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.513609] pci 0000:00:14.0: reg 10: [io 0x10c0-0x10cf] [ 0.513699] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.513715] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7] [ 0.513727] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7] [ 0.513739] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.513751] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.513762] pci 0000:00:14.1: reg 20: [io 0xbfa0-0xbfaf] [ 0.513807] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.513833] pci 0000:00:14.2: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] [ 0.513899] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.513904] pci 0000:00:14.2: PME# disabled [ 0.513922] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.514006] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.514060] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.514082] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.514102] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.514123] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.514181] pci 0000:01:05.0: [1002:791f] type 0 class 0x000300 [ 0.514193] pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.514202] pci 0000:01:05.0: reg 18: [mem 0xfe9f0000-0xfe9fffff 64bit] [ 0.514208] pci 0000:01:05.0: reg 20: [io 0xee00-0xeeff] [ 0.514214] pci 0000:01:05.0: reg 24: [mem 0xfea00000-0xfeafffff] [ 0.514229] pci 0000:01:05.0: supports D1 D2 [ 0.514247] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.514252] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.514256] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.514261] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.514305] pci 0000:0b:00.0: [14e4:4311] type 0 class 0x000280 [ 0.514321] pci 0000:0b:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff] [ 0.514398] pci 0000:0b:00.0: supports D1 D2 [ 0.514416] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.514426] pci 0000:00:05.0: PCI bridge to [bus 0b-0b] [ 0.514431] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.514435] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.514441] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.514467] pci 0000:00:07.0: PCI bridge to [bus 0c-0d] [ 0.514472] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.514476] pci 0000:00:07.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.514481] pci 0000:00:07.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.514515] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200 [ 0.514539] pci 0000:03:00.0: reg 10: [mem 0xfe5fe000-0xfe5fffff] [ 0.514633] pci 0000:03:00.0: supports D1 D2 [ 0.514636] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.514642] pci 0000:03:00.0: PME# disabled [ 0.514668] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00 [ 0.514686] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.514689] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller [ 0.514707] pci 0000:03:01.0: reg 10: [mem 0xfe5fd800-0xfe5fdfff] [ 0.514801] pci 0000:03:01.0: supports D1 D2 [ 0.514804] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.514810] pci 0000:03:01.0: PME# disabled [ 0.514835] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805 [ 0.514860] pci 0000:03:01.1: reg 10: [mem 0xfe5fd400-0xfe5fd4ff] [ 0.514954] pci 0000:03:01.1: supports D1 D2 [ 0.514957] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.514963] pci 0000:03:01.1: PME# disabled [ 0.514988] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880 [ 0.515012] pci 0000:03:01.2: reg 10: [mem 0xfe5fd600-0xfe5fd6ff] [ 0.515106] pci 0000:03:01.2: supports D1 D2 [ 0.515109] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.515115] pci 0000:03:01.2: PME# disabled [ 0.515140] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880 [ 0.515165] pci 0000:03:01.3: reg 10: [mem 0xfe5fd700-0xfe5fd7ff] [ 0.515259] pci 0000:03:01.3: supports D1 D2 [ 0.515262] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.515268] pci 0000:03:01.3: PME# disabled [ 0.515335] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.515341] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.515347] pci 0000:00:14.4: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.515353] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.515357] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.515360] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.515364] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.515367] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.515371] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.515375] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode) [ 0.515379] pci 0000:00:14.4: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode) [ 0.515382] pci 0000:00:14.4: bridge window [mem 0xfed00400-0xfedfffff] (subtractive decode) [ 0.515386] pci 0000:00:14.4: bridge window [mem 0xfee10400-0xffeffbff] (subtractive decode) [ 0.515390] pci 0000:00:14.4: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode) [ 0.515411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.515654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.515803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.515886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.515966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.516044] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.529245] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *0, disabled. [ 0.529312] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *0, disabled. [ 0.529376] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. [ 0.529439] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.529504] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.529573] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.529641] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.529709] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.529892] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.529900] vgaarb: loaded [ 0.530204] SCSI subsystem initialized [ 0.540170] libata version 3.00 loaded. [ 0.540170] usbcore: registered new interface driver usbfs [ 0.540170] usbcore: registered new interface driver hub [ 0.540170] usbcore: registered new device driver usb [ 0.540170] wmi: Mapper loaded [ 0.540170] PCI: Using ACPI for IRQ routing [ 0.540170] PCI: pci_cache_line_size set to 64 bytes [ 0.540170] pci 0000:00:12.0: no compatible bridge window for [mem 0xfec01000-0xfec013ff] [ 0.540170] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.540170] reserve RAM buffer: 00000000d7e63800 - 00000000d7ffffff [ 0.540170] NetLabel: Initializing [ 0.540170] NetLabel: domain hash size = 128 [ 0.540170] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.540170] NetLabel: unlabeled traffic allowed by default [ 0.540170] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.540170] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.540170] Switching to clocksource hpet [ 0.546796] Switched to NOHz mode on CPU #1 [ 0.546807] Switched to NOHz mode on CPU #0 [ 0.550753] AppArmor: AppArmor Filesystem Enabled [ 0.550797] pnp: PnP ACPI init [ 0.550826] ACPI: bus type pnp registered [ 0.565487] pnp 00:00: [bus 00-ff] [ 0.565491] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.565494] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.565497] pnp 00:00: [io 0x0d00-0xffff window] [ 0.565501] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.565504] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.565507] pnp 00:00: [mem 0xe0000000-0xf7ffffff window] [ 0.565510] pnp 00:00: [mem 0xfc000000-0xfebfffff window] [ 0.565513] pnp 00:00: [mem 0xfec10000-0xfecfffff window] [ 0.565517] pnp 00:00: [mem 0xfed00400-0xfedfffff window] [ 0.565520] pnp 00:00: [mem 0xfee10400-0xffeffbff window] [ 0.565523] pnp 00:00: [mem 0x120000000-0x317ffffff window] [ 0.565636] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.565683] pnp 00:01: [irq 12] [ 0.565719] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.565743] pnp 00:02: [io 0x0060] [ 0.565746] pnp 00:02: [io 0x0064] [ 0.565749] pnp 00:02: [io 0x0062] [ 0.565751] pnp 00:02: [io 0x0066] [ 0.565760] pnp 00:02: [irq 1] [ 0.565801] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.565824] pnp 00:03: [io 0x0070-0x0071] [ 0.565834] pnp 00:03: [irq 8] [ 0.565836] pnp 00:03: [io 0x0072-0x0077] [ 0.565872] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.565897] pnp 00:04: [io 0x0061] [ 0.565900] pnp 00:04: [io 0x0063] [ 0.565902] pnp 00:04: [io 0x0065] [ 0.565905] pnp 00:04: [io 0x0067] [ 0.565945] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.565967] pnp 00:05: [io 0x0c80-0x0cff] [ 0.566062] system 00:05: [io 0x0c80-0x0cff] could not be reserved [ 0.566066] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.566091] pnp 00:06: [dma 4] [ 0.566094] pnp 00:06: [io 0x0000-0x000f] [ 0.566097] pnp 00:06: [io 0x0080-0x0085] [ 0.566100] pnp 00:06: [io 0x0087-0x008f] [ 0.566103] pnp 00:06: [io 0x00c0-0x00df] [ 0.566106] pnp 00:06: [io 0x0010-0x001f] [ 0.566108] pnp 00:06: [io 0x0090-0x0091] [ 0.566111] pnp 00:06: [io 0x0093-0x009f] [ 0.566148] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.566175] pnp 00:07: [io 0x00f0-0x00ff] [ 0.566185] pnp 00:07: [irq 13] [ 0.566223] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.566282] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.566356] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.566361] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.567390] pnp 00:09: [io 0x0900-0x097f] [ 0.567393] pnp 00:09: [io 0x0022-0x0023] [ 0.567396] pnp 00:09: [io 0x0980-0x09ff] [ 0.567399] pnp 00:09: [io 0x0a00-0x0a7f] [ 0.567401] pnp 00:09: [io 0x0a80-0x0aff] [ 0.567404] pnp 00:09: [io 0x0cb0-0x0cff] [ 0.567407] pnp 00:09: [io 0x0d00-0x0d7f] [ 0.567410] pnp 00:09: [io 0x0d80-0x0dff] [ 0.567413] pnp 00:09: [io 0x0e00-0x0e7f] [ 0.567415] pnp 00:09: [io 0x0e80-0x0eaf] [ 0.567418] pnp 00:09: [io 0x0c6c] [ 0.567421] pnp 00:09: [io 0x0092] [ 0.567423] pnp 00:09: [io 0x00b4-0x00b5] [ 0.567426] pnp 00:09: [io 0x0020-0x0021] [ 0.567429] pnp 00:09: [io 0x00a0-0x00a1] [ 0.567432] pnp 00:09: [irq 0 disabled] [ 0.567435] pnp 00:09: [io 0x04d0-0x04d1] [ 0.567442] pnp 00:09: [io 0x1000-0x1005] [ 0.567445] pnp 00:09: [io 0x1008-0x100f] [ 0.567448] pnp 00:09: [io 0x0c00-0x0c01] [ 0.567450] pnp 00:09: [io 0x0c14] [ 0.567453] pnp 00:09: [io 0x0c50-0x0c51] [ 0.567456] pnp 00:09: [io 0x0c52] [ 0.567458] pnp 00:09: [io 0x0c6f] [ 0.567461] pnp 00:09: [io 0x0cd0-0x0cd1] [ 0.567464] pnp 00:09: [io 0x0cd4-0x0cd5] [ 0.567467] pnp 00:09: [io 0x0cd6-0x0cd7] [ 0.567469] pnp 00:09: [io 0x040b] [ 0.567472] pnp 00:09: [io 0x04d6] [ 0.567605] system 00:09: [io 0x0900-0x097f] has been reserved [ 0.567609] system 00:09: [io 0x0980-0x09ff] has been reserved [ 0.567613] system 00:09: [io 0x0a00-0x0a7f] has been reserved [ 0.567617] system 00:09: [io 0x0a80-0x0aff] has been reserved [ 0.567621] system 00:09: [io 0x0cb0-0x0cff] could not be reserved [ 0.567625] system 00:09: [io 0x0d00-0x0d7f] has been reserved [ 0.567629] system 00:09: [io 0x0d80-0x0dff] has been reserved [ 0.567633] system 00:09: [io 0x0e00-0x0e7f] has been reserved [ 0.567637] system 00:09: [io 0x0e80-0x0eaf] has been reserved [ 0.567640] system 00:09: [io 0x0c6c] has been reserved [ 0.567645] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.567649] system 00:09: [io 0x1000-0x1005] has been reserved [ 0.567653] system 00:09: [io 0x1008-0x100f] has been reserved [ 0.567657] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 0.567661] system 00:09: [io 0x0c14] has been reserved [ 0.567665] system 00:09: [io 0x0c50-0x0c51] has been reserved [ 0.567668] system 00:09: [io 0x0c52] has been reserved [ 0.567672] system 00:09: [io 0x0c6f] has been reserved [ 0.567676] system 00:09: [io 0x0cd0-0x0cd1] has been reserved [ 0.567680] system 00:09: [io 0x0cd4-0x0cd5] has been reserved [ 0.567684] system 00:09: [io 0x0cd6-0x0cd7] has been reserved [ 0.567688] system 00:09: [io 0x040b] has been reserved [ 0.567692] system 00:09: [io 0x04d6] has been reserved [ 0.567696] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.567721] pnp 00:0a: [io 0xf400-0xf4fe] [ 0.567723] pnp 00:0a: [io 0x0086] [ 0.567726] pnp 00:0a: [io 0x1006-0x1007] [ 0.567729] pnp 00:0a: [io 0x100a-0x1059] [ 0.567732] pnp 00:0a: [io 0x1080-0x10bf] [ 0.567735] pnp 00:0a: [io 0x10c0-0x10df] [ 0.567737] pnp 00:0a: [io 0x1010-0x102f] [ 0.567740] pnp 00:0a: [io 0x0809] [ 0.567848] system 00:0a: [io 0xf400-0xf4fe] has been reserved [ 0.567852] system 00:0a: [io 0x1006-0x1007] has been reserved [ 0.567856] system 00:0a: [io 0x100a-0x1059] could not be reserved [ 0.567859] system 00:0a: [io 0x1080-0x10bf] has been reserved [ 0.567864] system 00:0a: [io 0x10c0-0x10df] could not be reserved [ 0.567867] system 00:0a: [io 0x1010-0x102f] has been reserved [ 0.567871] system 00:0a: [io 0x0809] has been reserved [ 0.567875] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.584708] pnp 00:0b: [mem 0x00000000-0x0009efff] [ 0.584712] pnp 00:0b: [mem 0x0009f000-0x0009ffff] [ 0.584714] pnp 00:0b: [mem 0x000c0000-0x000cffff] [ 0.584717] pnp 00:0b: [mem 0x000e0000-0x000fffff] [ 0.584720] pnp 00:0b: [mem 0x00100000-0xd7e637ff] [ 0.584723] pnp 00:0b: [mem 0xd7e63800-0xd7efffff] [ 0.584728] pnp 00:0b: [mem 0xd7f00000-0xd7ffffff] [ 0.584732] pnp 00:0b: [mem 0xd7f00000-0xdfefffff] [ 0.584735] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.584738] pnp 00:0b: [mem 0xfec00000-0xfec0ffff] [ 0.584740] pnp 00:0b: [mem 0xfee00000-0xfee0ffff] [ 0.584743] pnp 00:0b: [mem 0xfee10000-0xfee103ff] [ 0.584746] pnp 00:0b: [mem 0xf8000000-0xfbffffff] [ 0.584878] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved [ 0.584882] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.584886] system 00:0b: [mem 0x000c0000-0x000cffff] has been reserved [ 0.584890] system 00:0b: [mem 0x000e0000-0x000fffff] has been reserved [ 0.584899] system 00:0b: [mem 0x00100000-0xd7e637ff] could not be reserved [ 0.584903] system 00:0b: [mem 0xd7e63800-0xd7efffff] has been reserved [ 0.584907] system 00:0b: [mem 0xd7f00000-0xd7ffffff] has been reserved [ 0.584911] system 00:0b: [mem 0xd7f00000-0xdfefffff] could not be reserved [ 0.584915] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.584919] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.584923] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.584927] system 00:0b: [mem 0xfee10000-0xfee103ff] has been reserved [ 0.584931] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.584936] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.585021] pnp: PnP ACPI: found 12 devices [ 0.585023] ACPI: ACPI bus type pnp unregistered [ 0.592201] pci 0000:00:12.0: BAR 5: assigned [mem 0xf0200000-0xf02003ff] [ 0.592210] pci 0000:00:12.0: BAR 5: set to [mem 0xf0200000-0xf02003ff] (PCI address [0xf0200000-0xf02003ff]) [ 0.592215] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.592219] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.592223] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.592228] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.592233] pci 0000:00:05.0: PCI bridge to [bus 0b-0b] [ 0.592236] pci 0000:00:05.0: bridge window [io disabled] [ 0.592240] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.592244] pci 0000:00:05.0: bridge window [mem pref disabled] [ 0.592248] pci 0000:00:07.0: PCI bridge to [bus 0c-0d] [ 0.592252] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.592256] pci 0000:00:07.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.592260] pci 0000:00:07.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.592267] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.592269] pci 0000:00:14.4: bridge window [io disabled] [ 0.592279] pci 0000:00:14.4: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.592284] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.592303] pci 0000:00:05.0: setting latency timer to 64 [ 0.592310] pci 0000:00:07.0: setting latency timer to 64 [ 0.592320] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.592323] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.592326] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.592329] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.592332] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.592335] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.592338] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.592342] pci_bus 0000:00: resource 11 [mem 0xfed00400-0xfedfffff] [ 0.592345] pci_bus 0000:00: resource 12 [mem 0xfee10400-0xffeffbff] [ 0.592348] pci_bus 0000:00: resource 13 [mem 0x120000000-0x317ffffff] [ 0.592351] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.592354] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff] [ 0.592358] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.592361] pci_bus 0000:0b: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.592365] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff] [ 0.592368] pci_bus 0000:0c: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.592371] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.592374] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff] [ 0.592378] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.592381] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.592384] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.592387] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.592390] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.592393] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.592396] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.592399] pci_bus 0000:03: resource 11 [mem 0xfed00400-0xfedfffff] [ 0.592402] pci_bus 0000:03: resource 12 [mem 0xfee10400-0xffeffbff] [ 0.592406] pci_bus 0000:03: resource 13 [mem 0x120000000-0x317ffffff] [ 0.592461] NET: Registered protocol family 2 [ 0.592738] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.595184] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.600189] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.600771] TCP: Hash tables configured (established 524288 bind 65536) [ 0.600775] TCP reno registered [ 0.600802] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.600864] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.601026] NET: Registered protocol family 1 [ 0.601249] pci 0000:01:05.0: Boot video device [ 0.601274] PCI: CLS 64 bytes, default 64 [ 0.620456] PCI-DMA: Disabling AGP. [ 0.620584] PCI-DMA: aperture base @ cc000000 size 65536 KB [ 0.620586] PCI-DMA: using GART IOMMU. [ 0.620591] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.624540] Simple Boot Flag at 0x79 set to 0x1 [ 0.625058] audit: initializing netlink socket (disabled) [ 0.625074] type=2000 audit(1311683773.620:1): initialized [ 0.643634] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.646127] VFS: Disk quotas dquot_6.5.2 [ 0.646204] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.647100] fuse init (API version 7.16) [ 0.647226] msgmni has been set to 7639 [ 0.647552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.647590] io scheduler noop registered [ 0.647592] io scheduler deadline registered [ 0.647650] io scheduler cfq registered (default) [ 0.647827] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.647867] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X [ 0.647927] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.647953] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X [ 0.648033] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.648065] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.648242] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.648316] ACPI: AC Adapter [AC] (on-line) [ 0.648416] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.740038] ACPI: Lid Switch [LID] [ 0.740101] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.818715] Freeing initrd memory: 12868k freed [ 0.840026] ACPI: Power Button [PBTN] [ 0.840090] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.840095] ACPI: Sleep Button [SBTN] [ 0.840332] ACPI: acpi_idle registered with cpuidle [ 0.840390] ACPI: processor limited to max C-state 1 [ 0.846665] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.846669] ACPI: Thermal Zone [THM] (49 C) [ 0.846739] ERST: Table is not found! [ 0.846866] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.899297] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.899321] ACPI: Battery Slot [BAT0] (battery present) [ 1.390463] Linux agpgart interface v0.103 [ 1.392301] brd: module loaded [ 1.393175] loop: module loaded [ 1.393332] i2c-core: driver [adp5520] using legacy suspend method [ 1.393334] i2c-core: driver [adp5520] using legacy resume method [ 1.393562] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.394119] Fixed MDIO Bus: probed [ 1.394164] PPP generic driver version 2.4.2 [ 1.394225] tun: Universal TUN/TAP device driver, 1.6 [ 1.394227] tun: (C) 1999-2004 Max Krasnyansky [ 1.394349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.394378] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 20 (level, low) -> IRQ 20 [ 1.394417] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 1.394472] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 1.394608] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 1.394632] ehci_hcd 0000:00:13.5: debug port 1 [ 1.394686] ehci_hcd 0000:00:13.5: irq 20, io mem 0xffa80000 [ 1.410040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 1.410622] hub 1-0:1.0: USB hub found [ 1.410639] hub 1-0:1.0: 10 ports detected [ 1.411098] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.411146] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.411189] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.411377] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.411466] ohci_hcd 0000:00:13.0: irq 16, io mem 0xffb00000 [ 1.474231] hub 2-0:1.0: USB hub found [ 1.474244] hub 2-0:1.0: 2 ports detected [ 1.474375] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.474393] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.474457] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.474551] ohci_hcd 0000:00:13.1: irq 17, io mem 0xffb01000 [ 1.534585] hub 3-0:1.0: USB hub found [ 1.534607] hub 3-0:1.0: 2 ports detected [ 1.534965] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.534995] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 1.535174] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.535243] ohci_hcd 0000:00:13.2: irq 18, io mem 0xffb02000 [ 1.594190] hub 4-0:1.0: USB hub found [ 1.594203] hub 4-0:1.0: 2 ports detected [ 1.594323] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.594340] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.594404] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.600083] ohci_hcd 0000:00:13.3: irq 17, io mem 0xffb03000 [ 1.664560] hub 5-0:1.0: USB hub found [ 1.664580] hub 5-0:1.0: 2 ports detected [ 1.664922] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.664951] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.665138] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.690068] ohci_hcd 0000:00:13.4: irq 18, io mem 0xffb04000 [ 1.754497] hub 6-0:1.0: USB hub found [ 1.754515] hub 6-0:1.0: 2 ports detected [ 1.754839] uhci_hcd: USB Universal Host Controller Interface driver [ 1.755186] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.758011] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.758024] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.758578] mousedev: PS/2 mouse device common for all mice [ 1.759215] rtc_cmos 00:03: RTC can wake from S4 [ 1.759336] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.759384] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.759550] device-mapper: uevent: version 1.0.3 [ 1.759668] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.759819] device-mapper: multipath: version 1.2.0 loaded [ 1.759824] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.760224] cpuidle: using governor ladder [ 1.760227] cpuidle: using governor menu [ 1.760654] TCP cubic registered [ 1.760837] NET: Registered protocol family 10 [ 1.761542] NET: Registered protocol family 17 [ 1.761568] Registering the dns_resolver key type [ 1.761605] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 (2 cpu cores) (version 2.20.00) [ 1.761965] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x12 [ 1.761968] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x13 [ 1.761971] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e [ 1.762510] PM: Hibernation image not present or could not be loaded. [ 1.762552] registered taskstats version 1 [ 1.762932] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.763774] Magic number: 3:812:633 [ 1.763903] rtc_cmos 00:03: setting system clock to 2011-07-26 12:36:14 UTC (1311683774) [ 1.763907] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.763909] EDD information not available. [ 1.766428] Freeing unused kernel memory: 956k freed [ 1.767064] Write protecting the kernel read-only data: 10240k [ 1.768151] Freeing unused kernel memory: 184k freed [ 1.775355] Freeing unused kernel memory: 1440k freed [ 1.790111] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 1.812943] <30>udev[68]: starting version 167 [ 1.958946] sdhci: Secure Digital Host Controller Interface driver [ 1.958951] sdhci: Copyright(c) Pierre Ossman [ 1.976766] scsi0 : pata_atiixp [ 1.980075] scsi1 : pata_atiixp [ 1.981744] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 1.981748] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 1.987295] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) [ 1.987318] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.988419] mmc0: no vmmc regulator found [ 1.989534] Registered led device: mmc0:: [ 1.992208] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA [ 2.014870] ahci 0000:00:12.0: version 3.0 [ 2.014906] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.014946] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 2.015049] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.015054] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.021022] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.021162] scsi2 : ahci [ 2.021452] scsi3 : ahci [ 2.021675] scsi4 : ahci [ 2.021884] scsi5 : ahci [ 2.022334] ata3: SATA max UDMA/133 abar m1024@0xf0200000 port 0xf0200100 irq 22 [ 2.022339] ata4: SATA max UDMA/133 abar m1024@0xf0200000 port 0xf0200180 irq 22 [ 2.022344] ata5: SATA max UDMA/133 abar m1024@0xf0200000 port 0xf0200200 irq 22 [ 2.022348] ata6: SATA max UDMA/133 abar m1024@0xf0200000 port 0xf0200280 irq 22 [ 2.080179] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 2.160501] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, DW10, max UDMA/33 [ 2.202474] ata1.00: configured for UDMA/33 [ 2.212068] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H DW10 PQ: 0 ANSI: 5 [ 2.222024] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.222030] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.222381] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.222710] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.280046] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 2.370057] ata6: SATA link down (SStatus 0 SControl 300) [ 2.370104] ata4: SATA link down (SStatus 0 SControl 300) [ 2.370139] ata5: SATA link down (SStatus 0 SControl 300) [ 2.570047] ata3: softreset failed (device not ready) [ 2.570053] ata3: applying SB600 PMP SRST workaround and retrying [ 2.580226] firewire_core: created device fw0: GUID 314fc0002173e181, S400 [ 2.770051] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.826281] ata3.00: ATA-8: WDC WD1200BEVS-75UST0, 01.01A01, max UDMA/133 [ 2.826287] ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 2.826292] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.827188] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.827192] ata3.00: configured for UDMA/133 [ 2.827400] scsi 2:0:0:0: Direct-Access ATA WDC WD1200BEVS-7 01.0 PQ: 0 ANSI: 5 [ 2.827733] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.827800] sd 2:0:0:0: [sda] Write Protect is off [ 2.827804] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.827833] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.827851] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.881097] sda: sda1 sda2 < sda5 sda6 > [ 2.881543] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.895478] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input4 [ 2.895646] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1/input0 [ 2.895673] usbcore: registered new interface driver usbhid [ 2.895676] usbhid: USB HID core driver [ 3.258102] EXT4-fs (sda5): INFO: recovery required on readonly filesystem [ 3.258107] EXT4-fs (sda5): write access will be enabled during recovery [ 4.371976] EXT4-fs (sda5): recovery complete [ 4.372573] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 18.577182] Adding 2610524k swap on /dev/sda6. Priority:-1 extents:1 across:2610524k [ 18.591300] <30>udev[316]: starting version 167 [ 18.634161] lp: driver loaded but no devices found [ 18.786227] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 18.810132] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.846334] acpi device:30: registered as cooling_device2 [ 18.847100] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input5 [ 18.847218] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 18.957722] lib80211: common routines for IEEE802.11 drivers [ 18.957728] lib80211_crypt: registered algorithm 'NULL' [ 18.975737] wl: module license 'MIXED/Proprietary' taints kernel. [ 18.975744] Disabling lock debugging due to kernel taint [ 18.989357] type=1400 audit(1311676591.709:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=486 comm="apparmor_parser" [ 18.989814] type=1400 audit(1311676591.709:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=486 comm="apparmor_parser" [ 18.990150] type=1400 audit(1311676591.719:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser" [ 19.088041] wl 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.088050] wl 0000:0b:00.0: setting latency timer to 64 [ 19.090453] malloc in abgphy done [ 19.090585] eth%d: 5.100.82.38 driver failed with code 21 [ 19.104424] b43-pci-bridge 0000:0b:00.0: setting latency timer to 64 [ 19.140157] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 19.140171] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 19.140178] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 19.140186] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 19.221154] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0 [ 19.227324] MCE: In-kernel MCE decoding enabled. [ 19.260501] b44 0000:03:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 19.265814] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 19.300547] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 19.300557] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 19.300566] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 19.316794] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x10c0, revision 0 [ 19.318963] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 19.319315] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 19.329333] EDAC MC: Ver: 2.1.0 Jun 28 2011 [ 19.337987] EDAC amd64_edac: v3.3.0 [ 19.376195] Linux video capture interface: v2.00 [ 19.382613] EDAC amd64: DRAM ECC disabled. [ 19.382625] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 19.382628] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 19.382629] (Note that use of the override may cause unknown side effects.) [ 19.402574] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 19.402635] b44: b44.c:v2.0 [ 19.441221] b44 ssb1:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1c:23:90:05:81 [ 19.449009] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 19.555415] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 19.555948] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 19.555953] uvcvideo: Failed to initialize the device (-5). [ 19.566489] usbcore: registered new interface driver uvcvideo [ 19.566495] USB Video Class driver (v1.0.0) [ 19.590661] type=1400 audit(1311676592.319:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=659 comm="apparmor_parser" [ 19.594974] type=1400 audit(1311676592.319:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=659 comm="apparmor_parser" [ 19.595281] type=1400 audit(1311676592.319:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=659 comm="apparmor_parser" [ 19.620823] type=1400 audit(1311676592.349:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=658 comm="apparmor_parser" [ 19.668376] type=1400 audit(1311676592.389:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=660 comm="apparmor_parser" [ 19.674438] type=1400 audit(1311676592.399:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=668 comm="apparmor_parser" [ 19.674986] type=1400 audit(1311676592.399:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=660 comm="apparmor_parser" [ 19.700527] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 [ 19.718303] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 [ 19.740540] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.884581] r852 0000:03:01.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 19.887092] r852: driver loaded succesfully [ 19.910428] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 19.975502] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.308515] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.480583] input: HDA ATI SB Mic at Ext Left Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 20.480857] input: HDA ATI SB HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 20.556062] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90006480000, using 3904k, total 3904k [ 20.556068] vesafb: mode is 1152x864x32, linelength=4608, pages=0 [ 20.556071] vesafb: scrolling: redraw [ 20.556075] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 20.556336] Console: switching to colour frame buffer device 144x54 [ 20.556369] fb0: VESA VGA frame buffer device [ 20.643888] ppdev: user-space parallel port driver [ 21.286637] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 21.326774] pci 0000:01:05.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 21.371519] [drm] Initialized drm 1.1.0 20060810 [ 21.431275] [drm] radeon defaulting to kernel modesetting. [ 21.431281] [drm] radeon kernel modesetting enabled. [ 21.431398] checking generic (e0000000 3d0000) vs hw (e0000000 10000000) [ 21.431401] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver [ 21.431487] Console: switching to colour dummy device 80x25 [ 21.437389] [drm] initializing kernel modesetting (RS690 0x1002:0x791F). [ 21.437440] [drm] register mmio base: 0xFE9F0000 [ 21.437442] [drm] register mmio size: 65536 [ 21.439627] ATOM BIOS: ATI [ 21.439662] radeon 0000:01:05.0: VRAM: 192M 0x00000000D4000000 - 0x00000000DFFFFFFF (192M used) [ 21.439666] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 21.439707] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 21.439709] [drm] Driver supports precise vblank timestamp query. [ 21.439748] [drm] radeon: irq initialized. [ 21.439985] [drm] Detected VRAM RAM=192M, BAR=256M [ 21.439991] [drm] RAM width 128bits DDR [ 21.440632] [TTM] Zone kernel: Available graphics memory: 1963530 kiB. [ 21.440635] [TTM] Initializing pool allocator. [ 21.440661] [drm] radeon: 192M of VRAM memory ready [ 21.440663] [drm] radeon: 512M of GTT memory ready. [ 21.440696] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 21.445058] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 21.455360] radeon 0000:01:05.0: WB enabled [ 21.456165] [drm] Loading RS690/RS740 Microcode [ 21.472026] [drm] radeon: ring at 0x00000000A0001000 [ 21.472049] [drm] ring test succeeded in 0 usecs [ 21.472230] [drm] radeon: ib pool ready. [ 21.472517] [drm] ib test succeeded in 0 usecs [ 21.472522] [drm] Enabling audio support [ 21.473302] [drm] Radeon Display Connectors [ 21.473305] [drm] Connector 0: [ 21.473307] [drm] VGA [ 21.473310] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 21.473313] [drm] Encoders: [ 21.473315] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 21.473317] [drm] Connector 1: [ 21.473319] [drm] LVDS [ 21.473322] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 21.473324] [drm] Encoders: [ 21.473326] [drm] LCD1: INTERNAL_LVTM1 [ 21.473328] [drm] Connector 2: [ 21.473329] [drm] S-video [ 21.473331] [drm] Encoders: [ 21.473332] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 21.473334] [drm] Connector 3: [ 21.473336] [drm] DVI-D [ 21.473338] [drm] HPD2 [ 21.473340] [drm] DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 0x7e4c 0x7e6c [ 21.473343] [drm] Encoders: [ 21.473344] [drm] DFP2: INTERNAL_DDI [ 21.533214] [drm] radeon: power management initialized [ 22.101931] composite sync not supported [ 22.203534] [drm] fb mappable at 0xE0040000 [ 22.203537] [drm] vram apper at 0xE0000000 [ 22.203539] [drm] size 5300224 [ 22.203541] [drm] fb depth is 24 [ 22.203542] [drm] pitch is 5888 [ 22.203750] fbcon: radeondrmfb (fb0) is primary device [ 22.204051] Console: switching to colour frame buffer device 180x56 [ 22.204061] fb0: radeondrmfb frame buffer device [ 22.204063] drm: registered panic notifier [ 22.204080] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0 [ 25.266604] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 48.030709] show_signal_msg: 15 callbacks suppressed [ 48.030715] unity_support_t[1347]: segfault at 4 ip 00007fcfdfe4adce sp 00007fff73de3930 error 4 in libGL.so.1.2[7fcfdfde8000+c0000] [ 193.947175] cfg80211: Calling CRDA to update world regulatory domain [ 194.028688] cfg80211: World regulatory domain updated: [ 194.028698] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 194.028707] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 194.028715] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 194.028723] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 194.028730] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 194.028737] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 194.099497] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 194.250240] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 194.250251] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250259] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 194.250267] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250274] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 194.250282] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250288] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 194.250295] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250302] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 194.250310] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250316] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 194.250323] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250330] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 194.250337] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250344] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 194.250351] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250357] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 194.250365] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250371] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 194.250379] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250385] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 194.250392] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250399] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 194.250406] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250413] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 194.250420] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.250427] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 194.250434] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 194.282857] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 194.284698] Registered led device: b43-phy0::tx [ 194.284764] Registered led device: b43-phy0::rx [ 194.284834] Registered led device: b43-phy0::radio [ 194.284888] Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ] [ 194.610071] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 194.782712] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 197.930507] wlan0: authenticate with d8:5d:4c:9e:a8:63 (try 1) [ 197.931992] wlan0: authenticated [ 197.932437] wlan0: associate with d8:5d:4c:9e:a8:63 (try 1) [ 197.934949] wlan0: RX AssocResp from d8:5d:4c:9e:a8:63 (capab=0x431 status=0 aid=4) [ 197.934958] wlan0: associated [ 197.937586] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 208.780065] wlan0: no IPv6 routers present [ 217.390494] wlan0: deauthenticating from d8:5d:4c:9e:a8:63 by local choice (reason=3) [ 217.420321] wlan0: authenticate with 00:11:50:0e:d7:38 (try 1) [ 217.422408] wlan0: authenticated [ 217.443304] wlan0: associate with 00:11:50:0e:d7:38 (try 1) [ 217.445791] wlan0: RX AssocResp from 00:11:50:0e:d7:38 (capab=0x431 status=0 aid=8) [ 217.445803] wlan0: associated [ 620.655398] gnome-screensav[1950]: segfault at 4 ip 00007f401f951dce sp 00007fffba2edcc0 error 4 in libGL.so.1.2[7f401f8ef000+c0000]